CUBONE

AMIGURUMI
YARN COLORS PATTERN
Suggested Colors:
Lion Brand Vanna's ABOUT THIS PATTERN
Choice: -Honey
While making this amigurumi you will work in
-Linen
continuous rounds, unless told otherwise. Use
Red Heart Super Saver:
a stitch maker to mark end of your rounds.
-Buff
The finished amigurumi should
FELT COLORS measure approximately 8.5 inches tall. Size
may vary, depending on yarn type and
Black personal yarn tension.
White
Instructions that need to be repeated will be
marked with brackets followed by the number
of times it needs to be repeated.
OTHER MATERIALS
Example:
Fiber-fil stuffing Round 4) [2 sc, inc] rep 6 times  (24)
Hot glue -or- felting
needle
Black embroidery floss
IMPORTANT INFORMATION
TOOLS NEEDED
You may not claim this pattern as your own.
G hook (4.0mm) You may not alter, copy, sell, or redistribute
Scissors this pattern in whole or in part.
Yarn Needle
Felting Needle
This pattern is intended for personal use only.

If you publish photos of items made from this

*Note: I use a felting needle to apply felt
pattern I ask that you please give me credit as
to my amigurumi. This is an optional
the original designer of the pattern. It's always
technique. If you do not have a felting
a good idea to give credit where credit is due.
needle you can use glue instead.

1
BODY PARTS

Skull Head
Use Linen. Stuff as you go.
Abbreviations
Round 1)    6 sc in magic ring (6) sc = single crochet
Round 2)    inc around (12) inc = increase (2 sc in the next sc)
Round 3)    [2 sc, 2 inc] rep 3 times (18) hdc= half double crochet
Round 4)    [4 sc, 2 inc] rep 3 times (24) dc = double crochet
Round 5)    [6 sc, 2 inc] rep 3 times (30) dec = invisible decrease
Round 6)    sc around (30) sl st = slip stitch
Round 7)    -Round 11) sc around (30)
Round 12)  [1 sc, inc] rep 6 times, 18 sc (36)
Round 13)  [2 sc, inc] rep 6 times, 18 sc (42) Skull Tooth
Round 14)  sc around (42) Use Linen. Make two
Round 15)  [3 sc, inc] rep 6 times, 18 sc (48) Round 1)    3 sc in magic ring (3)
Round 16)  sc around (48) Round 2)    inc around (6)
Round 17)  [4 sc, inc] rep 6 times, 18 sc (54) Round 3)    [1 sc, inc] rep 3 times (9)
Round 18)  sc around (54) Round 4)    sc around (9)
Round 19)  – Round 27) sc around (54) Finish with a slip stitch. Leave a long tail for
Round 28)  [7 sc, dec] rep 6 times (48) sewing.
Round 29)  [6 sc, dec] rep 6 times (42)
Round 30)  [5 sc, dec] rep 6 times (36) Skull Side
Round 31)  [4 sc, dec] rep 6 times (30) Use Linen. Make two
Round 32)  [3 sc, dec] rep 6 times (24) To make this piece we will start with a chain,
Round 33)  [2 sc, dec] rep 6 times (18) then crochet around the chain.
Round 34)  [1 sc, dec] rep 6 times (12) Chain 14
Round 35)  dec 6 times (6) Round 1)    Down the side of the chain: 12 sc,
Finish stuffing and close off. 3 sc in the next st, Up the other side of the
chain:12 sc, 3 sc in the next stitch (30)
Round 2)    sc around (30)
Skull Horn Round 3)    sc around (30)
Use Linen. Make two. Round 4)    [4 sc, inc] rep 6 times (36)
Round 1)    6 sc in magic ring (6) Round 5)    sc around (36)
Round 2)    inc around (12) Round 6)    sc around (36)
Round 3)    sc around in back loops only (12) Finish with a slip stitch. Do not close. Stuff
Round 4)    sc around (12) the piece.
Round 5)    sc around (12)
Round 6)    [3 sc, inc] rep 3 times (15)
Round 7)    sc around (15)
Round 8)    -Round 10) sc around (15)
Finish with a slip stitch. Do not close. Stuff
the horn. Leave a long tail for sewing.

2
BODY PARTS

Skull Eyes Belly

Use Honey and Linen. Start with Honey. Use Buff.
Make two. Round 1)    6 sc in magic ring (6)
Start with Honey. Round 2)    inc around (12)
Round 1)    6 sc in magic ring (6) Round 3)    [1 sc, inc] rep 6 times (18)
Round 2)    inc around (12) Round 4)    [2 sc, inc] rep 6 times (24)
Round 3)    [2 sc, 2 hdc in next st, 2 hdc in Round 5)    [3 sc, inc] rep 6 times (30)
next st] rep 3 times (18) Round 6)    [4 sc, inc] rep 6 times (36)
Round 4)    [4 sc, 2 hdc in next st, 2 hdc in Round 7)    [5 sc, inc] rep 6 times (42)
next st] rep 3 times (24) Round 8)    [6 sc, inc] rep 6 times (48)
-Color change to Linen- Round 9)    [7 sc, inc] rep 6 times (54)
Round 5)    [6 sc, inc, inc] rep 3 times (30) Finish with a slip stitch. Leave a long tail for
Finish with a slip stitch. sewing.

Tail
Body Use Honey.
Use Honey. Round 1)    6 sc in magic ring (6)
Round 1)    6 sc magic ring (6) Round 2)    [1 sc, inc] rep 3 times (9)
Round 2)    inc around (12) Round 3)    [2 sc, inc] rep 3 times (12)
Round 3)    [1 sc, inc] rep 6 times (18) Round 4)    sc around (12)
Round 4)    [2 sc, inc] rep 6 times (24) Round 5)    [3 sc, inc] rep 3 times (15)
Round 5)    [3 sc, inc] rep 6 times (30) Round 6)    [4 sc, inc] rep 3 times (18)
Round 6)    [4 sc, inc] rep 6 times (36) Round 7)    sc around (18)
Round 7)    [5 sc, inc] rep 6 times (42) Round 8)    [5 sc, inc] rep 3 times (21)
Round 8)    [6 sc, inc] rep 6 times (48) Round 9)    [6 sc, inc] rep 3 times (24)
Round 9)    [7 sc, inc] rep 6 times (54) Round 10)  [7 sc, inc] rep 3 times (27)
Round 10)  [8 sc, inc] rep 6 times (60) Round 11)  [8 sc, inc] rep 3 times (30)
Round 11)  sc around (60) Round 12)  [9 sc, inc] rep 3 times (33)
Round 12)  sc around (60) Finish with a slip stitch. Stuff the tail. Leave
Round 13)  sc around (60) open.
Round 14)  [8 sc, dec] rep 6 times (54)
Round 15)  – Round 19) sc around (54) Hips
Round 20)  [7 sc, dec] rep 6 times (48) Use Honey. Make two.
Round 21)  sc around (48) Round 1)    6 sc in magic ring (6)
Round 22)  [6 sc, dec] rep 6 times (42) Round 2)    inc around (12)
Round 23)  sc around (42) Round 3)    [1 sc, inc] rep 6 times (18)
Round 24)  [5 sc, dec] rep 6 times (36) Round 4)    [2 sc, inc} rep 6 times (24)
Round 25)  [4 sc, dec] rep 6 times (30) Round 5)    [3 sc, inc] rep 6 times (30)
Round 26)  sc around (30) Round 6)    sc around (30)
Round 27)  sc around (30) Round 7)    6 dec, 18 sc (24)
Finish with a slip stitch. Leave a long tail for Round 8)    sc around (24)
sewing. Stuff the body. Finish with a slip stitch. Stuff. Leave a long tail for
sewing.

3
BODY PARTS

Back Spike - Large Bone Club

Use Honey. The bone club is made by crocheting two
Round 1)    6 sc in magic ring (6) small semi-hemispheres and then joining
Round 2)    [1 sc, inc] rep 3 times (9) them together. Use Linen.
Round 3)    [2 sc, inc] rep 3 times (12)
Round 4)    sc around (12) Bone End 1
Finish with a slip stitch. Do not stuff. Fold the Round 1)    6 sc in magic ring (6)
spike flat. Round 2)    inc around (12)
Round 3)    sc around (12)
Finish with a slip stitch. Weave in the tail.
Back Spike - Small
Use Honey.
Bone End 2
Round 1)    6 sc in magic ring (6)
Round 1)    6 sc in magic ring (6)
Round 2)    [1 sc, inc] rep 3 times (9)
Round 2)    [1 sc, inc] rep 3 times (9)
Round 3)    [2 sc, inc] rep 3 times (12)
Round 3)    [2 sc, inc] rep 3 times (12)
Finish with a slip stitch. Do not stuff. Fold the
Round 4)    sc around (12)
spike flat.
Now we are going to join Bone End 1 and
Bone End 2 together. With your hook still
Foot attached to Bone End 2 (image 1), place your
Use Linen and Honey. Make two. hook through any stitch on Bone End 1
Start with Linen. (image 2). Now yarn over and make a single
Round 1)    3 sc in magic ring (3) crochet stitch (image 3). Place your stitch
Round 2)    inc around (6) marker in this stitch. Continue to crochet in
Round 3)    [1 sc, inc] rep 3 times (9) the round around both pieces that are now
-Color change to Honey- joined together.  Stuff as you go.
Round 4)    [2 sc, inc] rep 3 times (12)
Round 5)    sc around (12)
Round 6)    -Round 9) sc around (12)
Round 10)  [2 sc, dec] rep 3 times (9)
Round 11)  [1 sc, dec] rep 3 times (6)
Finish stuffing the foot, then close off.

1. 2.
Arm
Use Honey. Make two.
Round 1)    6 sc in magic ring (6)
Round 2)    inc around  (12)
Round 3)    sc around (12)
Round 4)    – Round 12) sc around (12)
Stuff the arm. Only lightly stuff towards the
opening.
Fold the arm flat, then sc across the opening

3.
to close the arm.

4
BODY PARTS

Bone Club (continued) Eyes and Nostrils

Round 5)    sc around (24) Use your scissors to cut out the shapes for
Round 6)    sc around (24) the eyes and nostrils. Use the images below
Round 7)    [2 sc, dec] rep 6 times (18) as a guide. It can also be very helpful to look
Round 8)    sc around (18) at reference pictures of Cubone's face when
Round 9)    [1 sc, dec] rep 6 times (12) making the eyes to help get the size and
Round 10)    sc around (12) shapes correct.
Round 11)    sc around (12)
Round 12)    [4 sc, dec] rep 2 times (10)
Round 13)    sc around (10)
Round 14)  sc around (10)
Round 15)  sc around (10)
Eyes, pupils
Round 16)  [3 sc, dec] rep 2 times (8)
and highlights.
Round 17)  – Round 20) sc around (8)
Round 21) [2 sc, dec] rep 2 times (6)
Round 22)  sc around (6)
Finish stuffing and then close off.

Eyes, pupils
and highlights
layered.

Finished Bone Club

Nostril shapes

5
 ASSEMBLY
Use the provided pictures of the finished Cubone as a visual aid to help guide you in the assembly
process. I recommend using pins to help plan where you want to sew parts to the body.

First we must assemble the Head/Skull.

1.Sew the Skull Side pieces to the sides

1 2
of the skull along the lower half.

2. Sew the Skull Teeth onto the Skull.

3. Sew the Horns to the Skull.

3
1
3 3

6
 ASSEMBLY
4
2
4.  Sew the Belly to the front of the
Body.

5.  Sew the tail to the back of the body.

6.   Sew the head onto the open end of

the body.

6
1
3 3

7. Sew the hips onto the lower sides of

the body.

7
 ASSEMBLY
8
2
8.  Sew or glue the feet under the hips
for a standing pose. -or- Position the feet
to the front of the hips for a sitting pose.

Standing Sitting

9.  Sew the arms to the sides of the body,

just under the head.

10.   Sew the back spikes to the back of

the body. The larger spike goes above the
small spike.

10
1
3 3

7. Sew or glue the Bone Club to

Cubone's hand.

11

8
 ASSEMBLY

Now we will start adding the details to Cubone's face. We will start by giving the skull sides some
ridges.

1. Take your yarn needle and a long

2
piece of Linen yarn. Look at the
underside of the ridge and run your
yarn through one of the stitches close
to where the Skull Side meets the
Skull. Tie a knot to anchor your yarn
and then run the loose end through
1 2
skull to hide it.
2. With your yarn needle, weave the yarn
through the stitches of the Skull Side
along the side and up to the top of the
Skull piece.
3. Pull the yarn tight to form the first
ridge.
4. Now take your yarn needle and push it
through the Skull Side back through to
the bottom more towards the front.
3 4
5. Now repeat steps 1 - 3 to make the
second ridge.

Repeat these steps for the other side.

3

5
1

9
 FACE

1. Sew the Skull Eyes to the sides of the

2
skull. 

2. Now we are going to make the inner

parts of the eyes sink back into the skull
a bit. To do this, take a long piece of
Honey yarn and anchor it to one of the
eyes. Push the eyes together and run your
yarn needle through to the other eye and
pull tightly. Run the yarn though a few
times and pull tight. Doing this will keep 2
the eyes from bulging out too much.

3. To make the skull cracks, use your yarn 3

needle and a long piece of black yarn or
black embroidery floss and embroider the
cracks down the the sides of the skull side
piece, close to where you made the
ridges.

3
3
3
4. Apply the eyes and nostrils to the head
by gluing or needle felting.
5
1
Finished! 4

10
Finished Pictures

Thank you!
For more patterns, check out my Etsy Shop "1Up Crochet"
1
3 For free amigurumi patterns visit my blog:
www.1upcrochet.com 3
1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpAshe

11
Finished Pictures

Thank you!
For more patterns, check out my Etsy Shop "1Up Crochet"
1
3 For free amigurumi patterns visit my blog:
www.1upcrochet.com 3
1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpAshe

12