Scribd Logo
Upload

Welcome to Scribd!

  • 1 Triad Abc

    Uploaded by

    AnamulKabir
    80 views4 pages
    This document provides specifications for a triad overall shielded armored cable with a 0.75 sq mm copper conductor. Key details include: 1) The cable conforms to various standards and has a voltage grade of 225V. 2) It features PVC insulation, aluminum foil shielding, and an outer PVC sheath. 3) Tests show the cable meets certain requirements for resistance, capacitance, attenuation, and other parameters.

    Original Description:

    1 TRIAD ABC

    Original Title

    1 TRIAD ABC

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document provides specifications for a triad overall shielded armored cable with a 0.75 sq mm copper conductor. Key details include: 1) The cable conforms to various standards and has a voltage grade of 225V. 2) It features PVC insulation, aluminum foil shielding, and an outer PVC sheath. 3) Tests show the cable meets certain requirements for resistance, capacitance, attenuation, and other parameters.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    80 views4 pages

    1 Triad Abc

    Uploaded by

    AnamulKabir
    This document provides specifications for a triad overall shielded armored cable with a 0.75 sq mm copper conductor. Key details include: 1) The cable conforms to various standards and has a voltage grade of 225V. 2) It features PVC insulation, aluminum foil shielding, and an outer PVC sheath. 3) Tests show the cable meets certain requirements for resistance, capacitance, attenuation, and other parameters.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 4

    DATASHEET FOR CABLE

    1 Type of cable 1 Traid Overall shielded Armoured cable, Type F


    (Single Triad cable shall have only overall
    shielding)
    2 Reference design standards VDE-0472, VDE-0815, VDE-0207-Part4&5, SEN-
    4241475, IS-10810, VDE-0816
    3 Voltage Grade 225V (peak)
    4 Conductor size 0.75 sq mm
    Conductor
    a) Reference Standard IS: 8130/84
    b) Material Annealed Bare Copper (ABC)
    c) Grade Electrolytic
    d) No. of strands / Diameter of Seven (7) / 0.37
    strands (before stranding) (mm)
    5
    Insulation
    a) Reference standard VDE-0207 Part 4
    b) Material Extruded PVC Type YI3
    6 c) Thickness (mm) 0.6 mm Nom.
    Minimum volume resistivity ( in
    ohm cm)
    (i) at 20 deg C 1 X 1014
    d) (ii) at 70 deg C 1 X 1011
    Pair & Twisting
    a) Whether pairs are twisted Yes
    b) Single layer of binder tape on Yes
    each pair provided
    c) Max. lay of twist (mm) 50
    d) Triad identification. As per manufacturer’s standard.
    e) Unit formation of four pairs with Yes
    numbered polyester binder tape
    for cables more than 4P is
    7 provided.
    Shield
    a) Material Al-Mylar Tape
    b) Min. Thickness of individual 0.028
    shield (in mm)
    c) Min. Thickness of overall shield 0.055
    8 (in mm)
    DATASHEET FOR CABLE

    d) Overlap / Coverage (minimum) 20% / 100%


    Drain wire
    a) Reference standard IS-8130
    b) Material Annealed Tinned Copper (ATC)
    c) Size ( sq mm) / No. of strands / 0.5 / Seven (7) / 0.3 (nom) (Approx.)
    Diameter of strands (mm)
    9 (before stranding)
    c) Separate drain wires for Yes
    individual as well as overall
    shield provided
    10 Fillers (if applicable) are non Yes
    hygroscopic & flame retardant
    Inner sheath
    a) Reference standard VDE-0207 Part 5, VDE-0816
    b) Material Extruded PVC Type YM1 with FRLS properties
    c) Min thickness of outer 0.3
    sheath.(in mm)
    ARMOUR
    Material Galvanised Steel round wire / flat strip, conf. to IS: 3975
    Size of armour (Nom.) 1T=1.4,
    Outer sheath
    a) Reference standard VDE-0207 Part 5, VDE-0816
    b) Material Extruded PVC Type YM1 with FRLS properties
    c) Min thickness of outer 1.8
    sheath.(in mm)
    d) Min. Oxygen index (as per 29
    ASTMD 2863) in %
    e) Min. Temp Index ( in deg C as 250
    per ASTMD-2863) at O2 index
    21%
    f) Max. Acid gas generation (as per 20
    IEC-60754-1 ) in % by weight
    g) Max. Smoke density rating (as 60
    per ASTMD-2843) in %
    11 h) Color of outer sheath Blue
    Complete cable
    a) Overall diameter of cable (mm) 1T=13
    12
    DATASHEET FOR CABLE

    b) Allowed Tolerance on overall (+/-) 2.0


    diameter(mm)
    c) Ovality at any cross-section not Yes
    more than 1 mm
    d) Variation in diameter not more Yes
    than 1 mm
    Cable parameters at 20 deg C (+/- 3 deg. C)
    a) Max. conductor loop resistance 53
    (in Ohm/km)
    b) Min. Insulation resistance at 100
    200C (in Mohm/km)
    c) Max. Mutual capacitance at 0.8 120
    KHz (in nF/km )
    d) Min. Cross talk for near end at 60
    0.8 KHz ( in dB)
    e) Max. attenuation at 1 KHz ( in 1.2
    dB)
    f) Max. characteristic impedance 320
    at 1 KHz ( in Ohm)
    g) Min. noise interference (in 60
    dB) as per IEEE
    13 Transections 1967
    14 Continuous maximum operating temp 70
    (deg. C)
    15 Whether complete cable assembly -Yes
    flame retardant as per IEEE 383

    16 Whether complete cable assembly Yes


    passes Swedish chimney test as per
    SEN 4241475 ( Class F3)
    Identification
    a) Progressive automatic on-line Yes
    sequential marking of length in
    meters at every one meter on
    outer sheath
    b) FRLS marked at every 5 meter Yes
    c) Durable marking at intervals Yes
    not exceeding 625 mm
    including:- Manufacturer’s
    name, Conductor’s size,
    17 Insulation Material, Number of
    DATASHEET FOR CABLE

    pairs, Type Of Cable, Voltage


    Grade, Year of manufacturer

    18 Test voltage
    a) High voltage test (Dielectric Core to core
    strength)
    i) Voltage (kV) 2
    ii) Duration (in min) 1
    b) Resistance to direct current test A.C
    i) Voltage (in Volts +/- 1200
    10%)
    ii) Duration 10 min
    Cable Drums
    a) Length of single coil in a drum It will be communicated at the time of ordering.
    b) Tolerance on individual drum (+/-) 5% on individual drum length & on overall
    length w.r.t (a) above quantity.
    c) Type - Non returnable wooden drum (wooden drum to
    be constructed from seasoned wood free from
    defects with wood preservative applied to entire
    drum)
    - Outermost layer to be covered with waterproof
    paper.
    - Entire surface to be painted.
    Identification marks provided Yes
    on drum
    Manufacturer’s name, Country
    of Manufacturing, Consignee
    Address, PO No, Drum No,
    Length of cable, Nett & Gross
    Wt, Year of manufacture, Type
    19 d) /Size of cable, Voltage Grade
    Inspection and Type test As per approved MQP
    20 requirements

    You might also like