Professional Documents
Culture Documents
Oracle Tuning AWR Code Depot
Oracle Tuning AWR Code Depot
--Oracle Tuning
--The Definitive Reference
--Alexey B. Danchenkov and Donald K. Burleson
--ISBN 0-9744486-2-1
--(c) 2006 by Rampant TechPress - All rights reserved.
--No portions of this code may be distributed without the express consent of Ram
pant TechPress
--These scripts are free for non-commercial use without any warranties.
--Use at your own risk!
-- *****************************************************************************
***************************
--oracle10g_quick.ksh
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
spool rpt_last.lst
set pages 9999;
set feedback on;
set verify off;
column reads format 999,999,999
column writes format 999,999,999
select
to_char(sn.end_interval_time,'yyyy-mm-dd HH24'),
(newreads.value-oldreads.value) reads,
(newwrites.value-oldwrites.value) writes
from
dba_hist_sysstat oldreads,
dba_hist_sysstat newreads,
dba_hist_sysstat oldwrites,
dba_hist_sysstat newwrites,
dba_hist_snapshot sn
where
newreads.snap_id = (select max(sn.snap_id)
from dba_hist_snapshot)
and newwrites.snap_id = (select max(sn.snap_id)
from dba_hist_snapshot)
and oldreads.snap_id = sn.snap_id-1
and oldwrites.snap_id = sn.snap_id-1
and oldreads.stat_name = 'physical reads'
and newreads.stat_name = 'physical reads'
and oldwrites.stat_name = 'physical writes'
and newwrites.stat_name = 'physical writes'
;
prompt ***********************************************************
prompt This will identify any single file who's read I/O
prompt is more than 10% of the total read I/O of the database.
prompt
prompt The "hot" file should be examined, and the hot table/index
prompt should be identified using STATSPACK.
prompt
prompt - The busy file should be placed on a disk device with
prompt "less busy" files to minimize read delay and channel
prompt contention.
prompt
prompt - If small file has a hot small table, place the table
prompt in the KEEP pool
prompt
prompt - If the file has a large-table full-table scan, place
prompt the table in the RECYCLE pool and turn on parallel query
prompt for the table.
prompt ***********************************************************
column mydate format a16
column file_name format a40
column reads format 999,999,999
select
to_char(sn.end_interval_time,'yyyy-mm-dd HH24') mydate,
new.filename file_name,
new.phyrds-old.phyrds reads
from
dba_hist_filestatxs old, dba_hist_filestatxs new, dba_hist_snapshot snw
here sn.snap_id = (select max(snap_id) from dba_hist_snapshot) and new.snap_
id = sn.snap_id
and
old.snap_id = sn.snap_id-1
and
new.filename = old.filename
--and
-- new.phyrds-old.phyrds > 10000
and
(new.phyrds-old.phyrds)*10 >
(
select
(newreads.value-oldreads.value) reads
from
dba_hist_sysstat oldreads,
dba_hist_sysstat newreads,
dba_hist_snapshot sn1
where
sn.snap_id = sn1.snap_id
and newreads.snap_id = sn.snap_id
and oldreads.snap_id = sn.snap_id-1
and oldreads.stat_name = 'physical reads'
and newreads.stat_name = 'physical reads'
and (newreads.value-oldreads.value) > 0)
;
prompt ***********************************************************
prompt This will identify any single file who's write I/O
prompt is more than 10% of the total write I/O of the database.
prompt
prompt The "hot" file should be examined, and the hot table/index
prompt should be identified using STATSPACK.
prompt
prompt - The busy file should be placed on a disk device with
prompt "less busy" files to minimize write delay and channel
prompt channel contention.
prompt
prompt - If small file has a hot small table, place the table
prompt in the KEEP pool
prompt
prompt ***********************************************************
column mydate format a16
column file_name format a40
column writes format 999,999,999
select
to_char(sn.end_interval_time,'yyyy-mm-dd HH24') mydate,
new.filename file_name,
new.phywrts-old.phywrts writes
from
dba_hist_filestatxs old,
dba_hist_filestatxs new,
dba_hist_snapshot sn
where
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and new.snap_id = sn.snap_id
and old.snap_id = sn.snap_id-1
and new.filename = old.filename
--and
---- new.phywrts-old.phywrts > 10000
and (new.phywrts-old.phywrts)*10 >
(select(newwrites.value-oldwrites.value) writes
from
dba_hist_sysstat oldwrites,
dba_hist_sysstat newwrites,
dba_hist_snapshot sn1
where
sn.snap_id = sn1.snap_id
and newwrites.snap_id = sn.snap_id
and oldwrites.snap_id = sn.snap_id-1
and oldwrites.stat_name = 'physical writes'
and newwrites.stat_name = 'physical writes'
and (newwrites.value-oldwrites.value) > 0)
;
prompt ***********************************************************
prompt The data buffer hit ratio is controlled by the db_block_buffer or db_cac
he_size parameters.
prompt ***********************************************************
column logical_reads format 999,999,999
column phys_reads format 999,999,999
column phys_writes format 999,999,999
column "BUFFER HIT RATIO" format 999
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
d.value "phys_writes",
round(100 * (((a.value-e.value)+(b.value-f.value))-(c.value-g.value)) /
((a.value-e.value)+(b.value-f.value)))
"BUFFER HIT RATIO"
from
dba_hist_sysstat a,
dba_hist_sysstat b,
dba_hist_sysstat c,
dba_hist_sysstat d,
dba_hist_sysstat e,
dba_hist_sysstat f,
dba_hist_sysstat g,
dba_hist_snapshot sn
where
-- (round(100 * (((a.value-e.value)+(b.value-f.value))-(c.value-g.value))
--/ ((a.value-e.value)+(b.value-f.value))) ) < 90
--and sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and a.snap_id = sn.snap_id
and b.snap_id = sn.snap_id
and c.snap_id = sn.snap_id
and d.snap_id = sn.snap_id
and e.snap_id = sn.snap_id-1
and f.snap_id = sn.snap_id-1
and g.snap_id = sn.snap_id-1
and a.stat_name = 'consistent gets'
and e.stat_name = 'consistent gets'
and b.stat_name = 'db block gets'
and f.stat_name = 'db block gets'
and c.stat_name = 'physical reads'
and g.stat_name = 'physical reads'
and d.stat_name = 'physical writes'
;
column mydate heading 'Yr. Mo Dy Hr.' format a16
column reloads format 999,999,999
column hit_ratio format 999.99
column pin_hit_ratio format 999.99
break on mydate skip 2;
select
to_char(sn.end_interval_time,'yyyy-mm-dd HH24') mydate,
new.namespace,
(new.gethits-old.gethits)/(new.gets-old.gets) hit_ratio,
(new.pinhits-old.pinhits)/(new.pins-old.pins) pin_hit_ratio,
new.reloads
from
dba_hist_librarycache old,
dba_hist_librarycache new,
dba_hist_snapshot sn
where
new.snap_id = sn.snap_id
and old.snap_id = new.snap_id-1
and old.namespace = new.namespace
and new.gets-old.gets > 0
and new.pins-old.pins > 0
;
prompt ***********************************************************
prompt When there are high disk sorts, you should investigate
prompt increasing sort_area_size, or adding indexes to force index_full scans
prompt ***********************************************************
column sorts_memory format 999,999,999
column sorts_disk format 999,999,999
column ratio format .9999999999999
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
newmem.value-oldmem.value sorts_memory,
newdsk.value-olddsk.value sorts_disk,
(newdsk.value-olddsk.value)/(newmem.value-oldmem.value) ratio
from
dba_hist_sysstat oldmem,
dba_hist_sysstat newmem,
dba_hist_sysstat newdsk,
dba_hist_sysstat olddsk,
dba_hist_snapshot sn
where
-- Where there are more than 100 disk sorts per hour
-- newdsk.value-olddsk.value > 100
--and
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and newdsk.snap_id = sn.snap_id
and olddsk.snap_id = sn.snap_id-1
and newmem.snap_id = sn.snap_id
and oldmem.snap_id = sn.snap_id-1
and oldmem.stat_name = 'sorts (memory)'
and newmem.stat_name = 'sorts (memory)'
and olddsk.stat_name = 'sorts (disk)'
and newdsk.stat_name = 'sorts (disk)'
and newmem.value-oldmem.value > 0
;
prompt ***********************************************************
prompt When there is high I/O waits, disk bottlenecks may exist
prompt Run iostats to find the hot disk and shuffle files to
prompt remove the contention
prompt
prompt See p. 191 "High Performance Oracle8 Tuning" by Don Burleson
prompt
prompt ***********************************************************
break on snapdate skip 2
column snapdate format a16
column filename format a40
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
old.filename,
new.wait_count-old.wait_count waits
from
dba_hist_filestatxs old,
dba_hist_filestatxs new,
dba_hist_snapshot sn
where
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and new.wait_count-old.wait_count > 0
and new.snap_id = sn.snap_id
and old.filename = new.filename
and old.snap_id = sn.snap_id-1
;
prompt ***********************************************************
prompt Buffer Bury Waits may signal a high update table with too
prompt few freelists. Find the offending table and add more freelists.
prompt ***********************************************************
column buffer_busy_wait format 999,999,999
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
avg(new.buffer_busy_wait-old.buffer_busy_wait) buffer_busy_wait
from
dba_hist_buffer_pool_stat old,
dba_hist_buffer_pool_stat new,
dba_hist_snapshot sn
where
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and new.snap_id = sn.snap_id
and new.snap_id = sn.snap_id
and old.snap_id = sn.snap_id-1
--having
-- avg(new.buffer_busy_wait-old.buffer_busy_wait) > 100
group by
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss')
;
prompt ***********************************************************
prompt High redo log space requests indicate a need to increase
prompt the log_buffer parameter
prompt ***********************************************************
column redo_log_space_requests format 999,999,999
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
newmem.value-oldmem.value redo_log_space_requests
from
dba_hist_sysstat oldmem,
dba_hist_sysstat newmem,
dba_hist_snapshot sn
where
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
--and
-- newmem.value-oldmem.value > 30
and newmem.snap_id = sn.snap_id
and oldmem.snap_id = sn.snap_id-1
and oldmem.stat_name = 'redo log space requests'
and newmem.stat_name = 'redo log space requests'
and newmem.value-oldmem.value > 0
;
prompt ***********************************************************
prompt Table fetch continued row indicates chained rows, or
prompt fetches of long datatypes (long raw, blob)
prompt
prompt Investigate increasing db_block_size or reorganizing tables
prompt with chained rows.
prompt
prompt ***********************************************************
column table_fetch_continued_row format 999,999,999
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
avg(newmem.value-oldmem.value) table_fetch_continued_row
from
dba_hist_sysstat oldmem,
dba_hist_sysstat newmem,
dba_hist_snapshot sn
where
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and newmem.snap_id = sn.snap_id
and oldmem.snap_id = sn.snap_id-1
and oldmem.stat_name = 'table fetch continued row'
and newmem.stat_name = 'table fetch continued row'
--and
-- newmem.value-oldmem.value > 0
--having
-- avg(newmem.value-oldmem.value) > 10000
group by
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss')
;
prompt ***********************************************************
prompt Enqueue Deadlocks indicate contention within the Oracle
prompt shared pool.
prompt
prompt Investigate increasing shared_pool_size
prompt ***********************************************************
column enqueue_deadlocks format 999,999,999
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
a.value enqueue_deadlocks
from
dba_hist_sysstat a,
dba_hist_snapshot sn
where
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and a.snap_id = sn.snap_id
and a.stat_name = 'enqueue deadlocks'
;
prompt ***********************************************************
prompt Long-table full table scans can indicate a need to:
prompt
prompt - Make the offending tables parallel query
prompt (alter table xxx parallel degree yyy;)
prompt - Place the table in the RECYCLE pool
prompt - Build an index on the table to remove the FTS
prompt
prompt To locate the table, run access.sql
prompt
prompt ***********************************************************
column fts format 999,999,999
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
newmem.value-oldmem.value fts
from
dba_hist_sysstat oldmem,
dba_hist_sysstat newmem,
dba_hist_snapshot sn
where
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and newmem.snap_id = sn.snap_id
and oldmem.snap_id = sn.snap_id-1
and oldmem.stat_name = 'table scans (long tables)'
and newmem.stat_name = 'table scans (long tables)'
;
spool off;
-- oracle9i_quick.ksh
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
#!/bin/ksh
# First, we must set the environment . . . .
ORACLE_SID=$ORACLE_SID
export ORACLE_SID
ORACLE_HOME=`cat /etc/oratab|grep ^$ORACLE_SID:|cut -f2 -d':'`
export ORACLE_HOME
PATH=$ORACLE_HOME/bin:$PATH
export PATH
echo "Please enter the number of seconds between snapshots."
read elapsed
$ORACLE_HOME/bin/sqlplus s perfstat/perfstat<<!
execute statspack.snap;
exit
!
sleep $elapsed
$ORACLE_HOME/bin/sqlplus s perfstat/perfstat<<!
execute statspack.snap;
select
name,
snap_id,
to_char(snap_time,' dd Mon YYYY HH24:mi:ss')
from
stats\$snapshot,
v\$database
where
snap_id > (select max(snap_id)-2 from stats\$snapshot)
;
-- oracle9i_rpt_last.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
spool rpt_last.lst
set pages 9999;
set feedback on;
set verify off;
column reads format 999,999,999
column writes format 999,999,999
select
to_char(snap_time,'yyyy-mm-dd HH24'),
(newreads.value-oldreads.value) reads,
(newwrites.value-oldwrites.value) writes
from
perfstat.stats$sysstat oldreads,
perfstat.stats$sysstat newreads,
perfstat.stats$sysstat oldwrites,
perfstat.stats$sysstat newwrites,
perfstat.stats$snapshot sn
where
newreads.snap_id = (select max(sn.snap_id) from stats$snapshot)
and newwrites.snap_id = (select max(sn.snap_id) from stats$snapshot)
and oldreads.snap_id = sn.snap_id-1
and oldwrites.snap_id = sn.snap_id-1
and oldreads.statistic# = 40
and newreads.statistic# = 40
and oldwrites.statistic# = 41
and newwrites.statistic# = 41
;
prompt ***********************************************************
prompt This will identify any single file who's read I/O
prompt is more than 10% of the total read I/O of the database.
prompt
prompt The "hot" file should be examined, and the hot table/index
prompt should be identified using STATSPACK.
prompt
prompt - The busy file should be placed on a disk device with
prompt "less busy" files to minimize read delay and channel
prompt contention.
prompt
prompt - If small file has a hot small table, place the table
prompt in the KEEP pool
prompt
prompt - If the file has a large-table full-table scan, place
prompt the table in the RECYCLE pool and turn on parallel query
prompt for the table.
prompt ***********************************************************
column mydate format a16
column file_name format a40
column reads format 999,999,999
select
to_char(snap_time,'yyyy-mm-dd HH24') mydate,
new.filename file_name,
new.phyrds-old.phyrds reads
from
perfstat.stats$filestatxs old,
perfstat.stats$filestatxs new,
perfstat.stats$snapshot sn
where
sn.snap_id = (select max(snap_id) from stats$snapshot)
and new.snap_id = sn.snap_id
and old.snap_id = sn.snap_id-1
and new.filename = old.filename
--and
-- new.phyrds-old.phyrds > 10000
and
(new.phyrds-old.phyrds)*10 >
(
select
(newreads.value-oldreads.value) reads
from
perfstat.stats$sysstat oldreads,
perfstat.stats$sysstat newreads,
perfstat.stats$snapshot sn1
where
sn.snap_id = sn1.snap_id
and newreads.snap_id = sn.snap_id
and oldreads.snap_id = sn.snap_id-1
and oldreads.statistic# = 40
and newreads.statistic# = 40
and (newreads.value-oldreads.value) > 0
)
;
prompt ***********************************************************
prompt This will identify any single file who's write I/O
prompt is more than 10% of the total write I/O of the database.
prompt
prompt The "hot" file should be examined, and the hot table/index
prompt should be identified using STATSPACK.
prompt
prompt - The busy file should be placed on a disk device with
prompt "less busy" files to minimize write delay and channel
prompt channel contention.
prompt
prompt - If small file has a hot small table, place the table
prompt in the KEEP pool
prompt
prompt ***********************************************************
column mydate format a16
column file_name format a40
column writes format 999,999,999
select
to_char(snap_time,'yyyy-mm-dd HH24') mydate,
new.filename file_name,
new.phywrts-old.phywrts writes
from
perfstat.stats$filestatxs old,
perfstat.stats$filestatxs new,
perfstat.stats$snapshot sn
where
sn.snap_id = (select max(snap_id) from stats$snapshot)
and new.snap_id = sn.snap_id
and old.snap_id = sn.snap_id-1
and new.filename = old.filename
--and
---- new.phywrts-old.phywrts > 10000
and
(new.phywrts-old.phywrts)*10 >
(
select
(newwrites.value-oldwrites.value) writes
from
perfstat.stats$sysstat oldwrites,
perfstat.stats$sysstat newwrites,
perfstat.stats$snapshot sn1
where
sn.snap_id = sn1.snap_id
and newwrites.snap_id = sn.snap_id
and oldwrites.snap_id = sn.snap_id-1
and oldwrites.statistic# = 40
and newwrites.statistic# = 40
and (newwrites.value-oldwrites.value) > 0
)
;
prompt ***********************************************************
prompt When the data buffer hit ratio falls below 90%, you
prompt should consider adding to the db_block_buffer init.ora parameter
prompt ***********************************************************
column logical_reads format 999,999,999
column phys_reads format 999,999,999
column phys_writes format 999,999,999
column "BUFFER HIT RATIO" format 999
select
to_char(snap_time,'dd Mon HH24:mi:ss') mydate,
d.value "phys_writes",
round(100 * (((a.value-e.value)+(b.value-f.value))-(c.value-g.value)) / ((a.v
alue-e.value)+(b.value-f.value)))
"BUFFER HIT RATIO"
from
perfstat.stats$sysstat a,
perfstat.stats$sysstat b,
perfstat.stats$sysstat c,
perfstat.stats$sysstat d,
perfstat.stats$sysstat e,
perfstat.stats$sysstat f,
perfstat.stats$sysstat g,
perfstat.stats$snapshot sn
where
-- (round(100 * (((a.value-e.value)+(b.value-f.value))-(c.value-g.value)) / ((
a.value-e.value)+(b.value-f.value))) ) < 90
--and
sn.snap_id = (select max(snap_id) from stats$snapshot)
and a.snap_id = sn.snap_id
and b.snap_id = sn.snap_id
and c.snap_id = sn.snap_id
and d.snap_id = sn.snap_id
and e.snap_id = sn.snap_id-1
and f.snap_id = sn.snap_id-1
and g.snap_id = sn.snap_id-1
and a.statistic# = 39
and e.statistic# = 39
and b.statistic# = 38
and f.statistic# = 38
and c.statistic# = 40
and g.statistic# = 40
and d.statistic# = 41
;
column mydate heading 'Yr. Mo Dy Hr.' format a16
column reloads format 999,999,999
column hit_ratio format 999.99
column pin_hit_ratio format 999.99
break on mydate skip 2;
select
to_char(snap_time,'yyyy-mm-dd HH24') mydate,
new.namespace,
(new.gethits-old.gethits)/(new.gets-old.gets) hit_ratio,
(new.pinhits-old.pinhits)/(new.pins-old.pins) pin_hit_ratio,
new.reloads
from
stats$librarycache old,
stats$librarycache new,
stats$snapshot sn
where
new.snap_id = sn.snap_id
and old.snap_id = new.snap_id-1
and old.namespace = new.namespace
and new.gets-old.gets > 0
and new.pins-old.pins > 0
;
prompt ***********************************************************
prompt When there are high disk sorts, you should investigate
prompt increasing sort_area_size, or adding indexes to force index_full scans
prompt ***********************************************************
column sorts_memory format 999,999,999
column sorts_disk format 999,999,999
column ratio format .9999999999999
select
to_char(snap_time,'dd Mon HH24:mi:ss') mydate,
newmem.value-oldmem.value sorts_memory,
newdsk.value-olddsk.value sorts_disk,
(newdsk.value-olddsk.value)/(newmem.value-oldmem.value) ratio
from
perfstat.stats$sysstat oldmem,
perfstat.stats$sysstat newmem,
perfstat.stats$sysstat newdsk,
perfstat.stats$sysstat olddsk,
perfstat.stats$snapshot sn
where
-- Where there are more than 100 disk sorts per hour
-- newdsk.value-olddsk.value > 100
--and
sn.snap_id = (select max(snap_id) from stats$snapshot)
and newdsk.snap_id = sn.snap_id
and olddsk.snap_id = sn.snap_id-1
and newmem.snap_id = sn.snap_id
and oldmem.snap_id = sn.snap_id-1
and oldmem.name = 'sorts (memory)'
and newmem.name = 'sorts (memory)'
and olddsk.name = 'sorts (disk)'
and newdsk.name = 'sorts (disk)'
and newmem.value-oldmem.value > 0
;
prompt ***********************************************************
prompt When there is high I/O waits, disk bottlenecks may exist
prompt Run iostats to find the hot disk and shuffle files to
prompt remove the contention
prompt
prompt See p. 191 "High Performance Oracle8 Tuning" by Don Burleson
prompt
prompt ***********************************************************
break on snapdate skip 2
column snapdate format a16
column filename format a40
select
to_char(snap_time,'dd Mon HH24:mi:ss') mydate,
old.filename,
new.wait_count-old.wait_count waits
from
perfstat.stats$filestatxs old,
perfstat.stats$filestatxs new,
perfstat.stats$snapshot sn
where
sn.snap_id = (select max(snap_id) from stats$snapshot)
and new.wait_count-old.wait_count > 0
and new.snap_id = sn.snap_id
and old.filename = new.filename
and old.snap_id = sn.snap_id-1
;
prompt ***********************************************************
prompt Buffer Bury Waits may signal a high update table with too
prompt few freelists. Find the offending table and add more freelists.
prompt ***********************************************************
column buffer_busy_wait format 999,999,999
select
to_char(snap_time,'dd Mon HH24:mi:ss') mydate,
avg(new.buffer_busy_wait-old.buffer_busy_wait) buffer_busy_wait
from
perfstat.stats$buffer_pool_statistics old,
perfstat.stats$buffer_pool_statistics new,
perfstat.stats$snapshot sn
where
sn.snap_id = (select max(snap_id) from stats$snapshot)
and new.snap_id = sn.snap_id
and new.snap_id = sn.snap_id
and old.snap_id = sn.snap_id-1
--having
-- avg(new.buffer_busy_wait-old.buffer_busy_wait) > 100
group by
to_char(snap_time,'dd Mon HH24:mi:ss')
;
prompt ***********************************************************
prompt High redo log space requests indicate a need to increase
prompt the log_buffer parameter
prompt ***********************************************************
column redo_log_space_requests format 999,999,999
select
to_char(snap_time,'dd Mon HH24:mi:ss') mydate,
newmem.value-oldmem.value redo_log_space_requests
from
perfstat.stats$sysstat oldmem,
perfstat.stats$sysstat newmem,
perfstat.stats$snapshot sn
where
sn.snap_id = (select max(snap_id) from stats$snapshot)
--and
-- newmem.value-oldmem.value > 30
and newmem.snap_id = sn.snap_id
and oldmem.snap_id = sn.snap_id-1
and oldmem.name = 'redo log space requests'
and newmem.name = 'redo log space requests'
and newmem.value-oldmem.value > 0
;
prompt ***********************************************************
prompt Table fetch continued row indicates chained rows, or
prompt fetches of long datatypes (long raw, blob)
prompt
prompt Investigate increasing db_block_size or reorganizing tables
prompt with chained rows.
prompt
prompt ***********************************************************
column table_fetch_continued_row format 999,999,999
select
to_char(snap_time,'dd Mon HH24:mi:ss') mydate,
avg(newmem.value-oldmem.value) table_fetch_continued_row
from
perfstat.stats$sysstat oldmem,
perfstat.stats$sysstat newmem,
perfstat.stats$snapshot sn
where
sn.snap_id = (select max(snap_id) from stats$snapshot)
and newmem.snap_id = sn.snap_id
and oldmem.snap_id = sn.snap_id-1
and oldmem.name = 'table fetch continued row'
and newmem.name = 'table fetch continued row'
--and
-- newmem.value-oldmem.value > 0
--having
-- avg(newmem.value-oldmem.value) > 10000
group by
to_char(snap_time,'dd Mon HH24:mi:ss')
;
prompt ***********************************************************
prompt Enqueue Deadlocks indicate contention within the Oracle
prompt shared pool.
prompt
prompt Investigate increasing shared_pool_size
prompt ***********************************************************
column enqueue_deadlocks format 999,999,999
select
to_char(snap_time,'dd Mon HH24:mi:ss') mydate,
a.value enqueue_deadlocks
from
perfstat.stats$sysstat a,
perfstat.stats$snapshot sn
where
sn.snap_id = (select max(snap_id) from stats$snapshot)
and a.snap_id = sn.snap_id
and a.statistic# = 24
;
prompt ***********************************************************
prompt Long-table full table scans can indicate a need to:
prompt
prompt - Make the offending tables parallel query
prompt (alter table xxx parallel degree yyy;)
prompt - Place the table in the RECYCLE pool
prompt - Build an index on the table to remove the FTS
prompt
prompt To locate the table, run access.sql
prompt
prompt ***********************************************************
column fts format 999,999,999
select
to_char(snap_time,'dd Mon HH24:mi:ss') mydate,
newmem.value-oldmem.value fts
from
perfstat.stats$sysstat oldmem,
perfstat.stats$sysstat newmem,
perfstat.stats$snapshot sn
where
sn.snap_id = (select max(snap_id) from stats$snapshot)
and newmem.snap_id = sn.snap_id
and oldmem.snap_id = sn.snap_id-1
and oldmem.statistic# = 140
and newmem.statistic# = 140
;
spool off;
-- oracle10g_rpt_last.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
spool rpt_last.lst
set pages 9999;
set feedback on;
set verify off;
column reads format 999,999,999
column writes format 999,999,999
select
to_char(sn.end_interval_time,'yyyy-mm-dd HH24'),
(newreads.value-oldreads.value) reads,
(newwrites.value-oldwrites.value) writes
from
dba_hist_sysstat oldreads,
dba_hist_sysstat newreads,
dba_hist_sysstat oldwrites,
dba_hist_sysstat newwrites,
dba_hist_snapshot sn
where
newreads.snap_id = (select max(sn.snap_id)
from dba_hist_snapshot)
and newwrites.snap_id = (select max(sn.snap_id)
from dba_hist_snapshot)
and oldreads.snap_id = sn.snap_id-1
and oldwrites.snap_id = sn.snap_id-1
and oldreads.stat_name = 'physical reads'
and newreads.stat_name = 'physical reads'
and oldwrites.stat_name = 'physical writes'
and newwrites.stat_name = 'physical writes'
;
prompt ***********************************************************
prompt This will identify any single file who's read I/O
prompt is more than 10% of the total read I/O of the database.
prompt
prompt The "hot" file should be examined, and the hot table/index
prompt should be identified using STATSPACK.
prompt
prompt - The busy file should be placed on a disk device with
prompt "less busy" files to minimize read delay and channel
prompt contention.
prompt
prompt - If small file has a hot small table, place the table
prompt in the KEEP pool
prompt
prompt - If the file has a large-table full-table scan, place
prompt the table in the RECYCLE pool and turn on parallel query
prompt for the table.
prompt ***********************************************************
column mydate format a16
column file_name format a40
column reads format 999,999,999
select
to_char(sn.end_interval_time,'yyyy-mm-dd HH24') mydate,
new.filename file_name,
new.phyrds-old.phyrds reads
from
dba_hist_filestatxs old,
dba_hist_filestatxs new,
dba_hist_snapshot sn
where
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and new.snap_id = sn.snap_id
and old.snap_id = sn.snap_id-1
and new.filename = old.filename
--and
-- new.phyrds-old.phyrds > 10000
and (new.phyrds-old.phyrds)*10 >
(select(newreads.value-oldreads.value) reads
from
dba_hist_sysstat oldreads,
dba_hist_sysstat newreads,
dba_hist_snapshot sn1
where
sn.snap_id = sn1.snap_id
and newreads.snap_id = sn.snap_id
and oldreads.snap_id = sn.snap_id-1
and oldreads.stat_name = 'physical reads'
and newreads.stat_name = 'physical reads'
and (newreads.value-oldreads.value) > 0)
;
prompt ***********************************************************
prompt This will identify any single file who's write I/O
prompt is more than 10% of the total write I/O of the database.
prompt
prompt The "hot" file should be examined, and the hot table/index
prompt should be identified using STATSPACK.
prompt
prompt - The busy file should be placed on a disk device with
prompt "less busy" files to minimize write delay and channel
prompt channel contention.
prompt
prompt - If small file has a hot small table, place the table
prompt in the KEEP pool
prompt
prompt ***********************************************************
column mydate format a16
column file_name format a40
column writes format 999,999,999
select
to_char(sn.end_interval_time,'yyyy-mm-dd HH24') mydate,
new.filename file_name,
new.phywrts-old.phywrts writes
from
dba_hist_filestatxs old,
dba_hist_filestatxs new,
dba_hist_snapshot sn
where
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and new.snap_id = sn.snap_id
and old.snap_id = sn.snap_id-1
and new.filename = old.filename
--and
---- new.phywrts-old.phywrts > 10000
and (new.phywrts-old.phywrts)*10 >
(select (newwrites.value-oldwrites.value) writes
from
dba_hist_sysstat oldwrites,
dba_hist_sysstat newwrites,
dba_hist_snapshot sn1
where
sn.snap_id = sn1.snap_id
and newwrites.snap_id = sn.snap_id
and oldwrites.snap_id = sn.snap_id-1
and oldwrites.stat_name = 'physical writes'
and newwrites.stat_name = 'physical writes'
and (newwrites.value-oldwrites.value) > 0)
;
prompt ***********************************************************
prompt When the data buffer hit ratio falls below 90%, you
prompt should consider adding to the db_block_buffer init.ora parameter
prompt ***********************************************************
column logical_reads format 999,999,999
column phys_reads format 999,999,999
column phys_writes format 999,999,999
column "BUFFER HIT RATIO" format 999
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
d.value "phys_writes",
round(100 * (((a.value-e.value)+(b.value-f.value))-(c.value-g.value)) /
((a.value-e.value)+(b.value-f.value)))
"BUFFER HIT RATIO"
from
dba_hist_sysstat a,
dba_hist_sysstat b,
dba_hist_sysstat c,
dba_hist_sysstat d,
dba_hist_sysstat e,
dba_hist_sysstat f,
dba_hist_sysstat g,
dba_hist_snapshot sn
where
-- (round(100 * (((a.value-e.value)+(b.value-f.value))-(c.value-g.value))
--/ ((a.value-e.value)+(b.value-f.value))) ) < 90
--and
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and a.snap_id = sn.snap_id
and b.snap_id = sn.snap_id
and c.snap_id = sn.snap_id
and d.snap_id = sn.snap_id
and e.snap_id = sn.snap_id-1
and f.snap_id = sn.snap_id-1
and g.snap_id = sn.snap_id-1
and a.stat_name = 'consistent gets'
and e.stat_name = 'consistent gets'
and b.stat_name = 'db block gets'
and f.stat_name = 'db block gets'
and c.stat_name = 'physical reads'
and g.stat_name = 'physical reads'
and d.stat_name = 'physical writes'
;
column mydate heading 'Yr. Mo Dy Hr.' format a16
column reloads format 999,999,999
column hit_ratio format 999.99
column pin_hit_ratio format 999.99
break on mydate skip 2;
select
to_char(sn.end_interval_time,'yyyy-mm-dd HH24') mydate,
new.namespace,
(new.gethits-old.gethits)/(new.gets-old.gets) hit_ratio,
(new.pinhits-old.pinhits)/(new.pins-old.pins) pin_hit_ratio,
new.reloads
from
dba_hist_librarycache old,
dba_hist_librarycache new,
dba_hist_snapshot sn
where
new.snap_id = sn.snap_id
and old.snap_id = new.snap_id-1
and old.namespace = new.namespace
and new.gets-old.gets > 0
and new.pins-old.pins > 0
;
prompt ***********************************************************
prompt When there are high disk sorts, you should investigate
prompt increasing sort_area_size, or adding indexes to force index_full scans
prompt ***********************************************************
column sorts_memory format 999,999,999
column sorts_disk format 999,999,999
column ratio format .9999999999999
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
newmem.value-oldmem.value sorts_memory,
newdsk.value-olddsk.value sorts_disk,
(newdsk.value-olddsk.value)/(newmem.value-oldmem.value) ratio
from
dba_hist_sysstat oldmem,
dba_hist_sysstat newmem,
dba_hist_sysstat newdsk,
dba_hist_sysstat olddsk,
dba_hist_snapshot sn
where
-- Where there are more than 100 disk sorts per hour
-- newdsk.value-olddsk.value > 100
--and
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and newdsk.snap_id = sn.snap_id
and olddsk.snap_id = sn.snap_id-1
and newmem.snap_id = sn.snap_id
and oldmem.snap_id = sn.snap_id-1
and oldmem.stat_name = 'sorts (memory)'
and newmem.stat_name = 'sorts (memory)'
and olddsk.stat_name = 'sorts (disk)'
and newdsk.stat_name = 'sorts (disk)'
and newmem.value-oldmem.value > 0
;
prompt ***********************************************************
prompt When there is high I/O waits, disk bottlenecks may exist
prompt Run iostats to find the hot disk and shuffle files to
prompt remove the contention
prompt
prompt See p. 191 "High Performance Oracle8 Tuning" by Don Burleson
prompt
prompt ***********************************************************
break on snapdate skip 2
column snapdate format a16
column filename format a40
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
old.filename,
new.wait_count-old.wait_count waits
from
dba_hist_filestatxs old,
dba_hist_filestatxs new,
dba_hist_snapshot sn
where
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and new.wait_count-old.wait_count > 0
and new.snap_id = sn.snap_id
and old.filename = new.filename
and old.snap_id = sn.snap_id-1
;
prompt ***********************************************************
prompt Buffer Bury Waits may signal a high update table with too
prompt few freelists. Find the offending table and add more freelists.
prompt ***********************************************************
column buffer_busy_wait format 999,999,999
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
avg(new.buffer_busy_wait-old.buffer_busy_wait) buffer_busy_wait
from
dba_hist_buffer_pool_stat old,
dba_hist_buffer_pool_stat new,
dba_hist_snapshot sn
where
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and new.snap_id = sn.snap_id
and new.snap_id = sn.snap_id
and old.snap_id = sn.snap_id-1
--having
-- avg(new.buffer_busy_wait-old.buffer_busy_wait) > 100
group by
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss')
;
prompt ***********************************************************
prompt High redo log space requests indicate a need to increase
prompt the log_buffer parameter
prompt ***********************************************************
column redo_log_space_requests format 999,999,999
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
newmem.value-oldmem.value redo_log_space_requests
from
dba_hist_sysstat oldmem,
dba_hist_sysstat newmem,
dba_hist_snapshot sn
where
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
--and
-- newmem.value-oldmem.value > 30
and newmem.snap_id = sn.snap_id
and oldmem.snap_id = sn.snap_id-1
and oldmem.stat_name = 'redo log space requests'
and newmem.stat_name = 'redo log space requests'
and newmem.value-oldmem.value > 0
;
prompt ***********************************************************
prompt Table fetch continued row indicates chained rows, or fetches of
prompt long datatypes (long raw, blob)
prompt
prompt Investigate increasing db_block_size or reorganizing tables
prompt with chained rows.
prompt
prompt ***********************************************************
column table_fetch_continued_row format 999,999,999
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
avg(newmem.value-oldmem.value) table_fetch_continued_row
from
dba_hist_sysstat oldmem,
dba_hist_sysstat newmem,
dba_hist_snapshot sn
where
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and newmem.snap_id = sn.snap_id
and oldmem.snap_id = sn.snap_id-1
and oldmem.stat_name = 'table fetch continued row'
and newmem.stat_name = 'table fetch continued row'
--and
-- newmem.value-oldmem.value > 0
--having
-- avg(newmem.value-oldmem.value) > 10000
group by
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss')
;
prompt ***********************************************************
prompt Enqueue Deadlocks indicate contention within the Oracle
prompt shared pool.
prompt
prompt Investigate increasing shared_pool_size
prompt ***********************************************************
column enqueue_deadlocks format 999,999,999
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
a.value enqueue_deadlocks
from
dba_hist_sysstat a,
dba_hist_snapshot sn
where
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and a.snap_id = sn.snap_id
and a.stat_name = 'enqueue deadlocks'
;
prompt ***********************************************************
prompt Long-table full table scans can indicate a need to:
prompt
prompt - Make the offending tables parallel query
prompt (alter table xxx parallel degree yyy;)
prompt - Place the table in the RECYCLE pool
prompt - Build an index on the table to remove the FTS
prompt
prompt To locate the table, run access.sql
prompt
prompt ***********************************************************
column fts format 999,999,999
select
to_char(sn.end_interval_time,'dd Mon HH24:mi:ss') mydate,
newmem.value-oldmem.value fts
from
dba_hist_sysstat oldmem,
dba_hist_sysstat newmem,
dba_hist_snapshot sn
where
sn.snap_id = (select max(snap_id) from dba_hist_snapshot)
and newmem.snap_id = sn.snap_id
and oldmem.snap_id = sn.snap_id-1
and oldmem.stat_name = 'table scans (long tables)'
and newmem.stat_name = 'table scans (long tables)'
;
spool off;
-- rpt_lib_miss_oracle9i.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
set lines 80;
set pages 999;
column mydate heading 'Yr. Mo Dy Hr.' format a16
column c1 heading "execs" format 9,999,999
column c2 heading "Cache Misses|While Executing" format 9,999,999
column c3 heading "Library Cache|Miss Ratio" format 999.99999
break on mydate skip 2;
select
to_char(snap_time,'yyyy-mm-dd HH24') mydate,
sum(new.pins-old.pins) c1,
sum(new.reloads-old.reloads) c2,
sum(new.reloads-old.reloads)/
sum(new.pins-old.pins) library_cache_miss_ratio
from
stats$librarycache old,
stats$librarycache new,
stats$snapshot sn
where
new.snap_id = sn.snap_id
and old.snap_id = new.snap_id-1
and old.namespace = new.namespace
group by
to_char(snap_time,'yyyy-mm-dd HH24')
;
-- rpt_10g_lib_miss.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
set lines 80;
set pages 999;
column mydate heading 'Yr. Mo Dy Hr.' format a16
column c1 heading "execs" format 9,999,999
column c2 heading "Cache Misses|While Executing" format 9,999,999
column c3 heading "Library Cache|Miss Ratio" format 999.99999
break on mydate skip 2;
select
to_char(sn.end_interval_time,'yyyy-mm-dd HH24') mydate,
sum(new.pins-old.pins) c1,
sum(new.reloads-old.reloads) c2,
sum(new.reloads-old.reloads)/
sum(new.pins-old.pins) library_cache_miss_ratio
from
dba_hist_librarycache old,
dba_hist_librarycache new,
dba_hist_snapshot sn
where
new.snap_id = sn.snap_id
and old.snap_id = new.snap_id-1
and old.namespace = new.namespace
group by
to_char(sn.end_interval_time,'yyyy-mm-dd HH24')
;
-- shared_pool_advice.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
set lines 100
set pages 999
column c1 heading 'Pool |Size(M)'
column c2 heading 'Size|Factor'
column c3 heading 'Est|LC(M) '
column c4 heading 'Est LC|Mem. Obj.'
column c5 heading 'Est|Time|Saved|(sec)'
column c6 heading 'Est|Parse|Saved|Factor'
column c7 heading 'Est|Object Hits' format 999,999,999
SELECT
shared_pool_size_for_estimate c1,
shared_pool_size_factor c2,
estd_lc_size c3,
estd_lc_memory_objects c4,
estd_lc_time_saved c5,
estd_lc_time_saved_factor c6,
estd_lc_memory_object_hits c7
FROM
v$shared_pool_advice;
-- change_sga.ksh
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
#!/bin/ksh
# First, we must set the environment . . . .
ORACLE_SID=$1
export ORACLE_SID
ORACLE_HOME=`cat /etc/oratab|grep ^$ORACLE_SID:|cut -f2 -d':'`
#ORACLE_HOME=`cat /var/opt/oracle/oratab|grep ^$ORACLE_SID:|cut -f2 -d':'`
export ORACLE_HOME
PATH=$ORACLE_HOME/bin:$PATH
export PATH
$ORACLE_HOME/bin/sqlplus s /nologin<<!
connect system/manager as sysdba;
alter system set db_cache_size=1500m;
alter system set shared_pool_size=500m;
alter system set pga_aggregate_target=4000m;
exit
!
-- dss_config.ksh
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
#!/bin/ksh
# First, we must set the environment . . . .
ORACLE_SID=$1
export ORACLE_SID
ORACLE_HOME=`cat /etc/oratab|grep ^$ORACLE_SID:|cut -f2 -d':'`
#ORACLE_HOME=`cat /var/opt/oracle/oratab|grep ^$ORACLE_SID:|cut -f2 -d':'`
export ORACLE_HOME
PATH=$ORACLE_HOME/bin:$PATH
export PATH
$ORACLE_HOME/bin/sqlplus s /nologin<<!
connect system/manager as sysdba;
alter system set db_cache_size=1500m;
alter system set shared_pool_size=500m;
alter system set pga_aggregate_target=4000m;
exit
!
-- oltp_config.ksh
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
#!/bin/ksh
# First, we must set the environment . . . .
ORACLE_SID=$1
export ORACLE_SID
ORACLE_HOME=`cat /etc/oratab|grep ^$ORACLE_SID:|cut -f2 -d':'`
#ORACLE_HOME=`cat /var/opt/oracle/oratab|grep ^$ORACLE_SID:|cut -f2 -d':'`
export ORACLE_HOME
PATH=$ORACLE_HOME/bin:$PATH
export PATH
$ORACLE_HOME/bin/sqlplus s /nologin<<!
connect system/manager as sysdba;
alter system set db_cache_size=4000m;
alter system set shared_pool_size=500m;
alter system set pga_aggregate_target=1500m;
exit
!
-- AWR_usage.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select samp.dbid, fu.name, samp.version, detected_usages, total_samples,
decode(to_char(last_usage_date, 'MM/DD/YYYY, HH:MI:SS'),
NULL, 'FALSE',
to_char(last_sample_date, 'MM/DD/YYYY, HH:MI:SS'), 'TRUE',
'FALSE')
currently_used, first_usage_date, last_usage_date, aux_count,
feature_info, last_sample_date, last_sample_period,
sample_interval, mt.description
from wri$_dbu_usage_sample samp, wri$_dbu_feature_usage fu,
wri$_dbu_feature_metadata mt
where
samp.dbid = fu.dbid and
samp.version = fu.version and
fu.name = mt.name and
fu.name not like '_DBFUS_TEST%' and /* filter out test features */
bitand(mt.usg_det_method, 4) != 4 /* filter out disabled features */
-- phys_disk_reads_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
break on begin_interval_time skip 2
column phyrds format 999,999,999
column begin_interval_time format a25
select
begin_interval_time,
filename,
phyrds
from
dba_hist_filestatxs
natural join
dba_hist_snapshot
;
-- rpt_10g_sysstat.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
prompt
prompt This will query the dba_hist_sysstat to display all values
prompt that exceed the value specified in
prompt the "where" clause of the query.
prompt
set pages 999
break on snap_time skip 2
accept stat_name char prompt 'Enter Statistic Name: ';
accept stat_value number prompt 'Enter Statistics Threshold value: ';
col snap_time format a19
col value format 999,999,999
select
to_char(begin_interval_time,'yyyy-mm-dd hh24:mi') snap_time,
value
from
dba_hist_sysstat
natural join
dba_hist_snapshot
where
stat_name = '&stat_name'
and
value > &stat_value
order by to_char(begin_interval_time,'yyyy-mm-dd hh24:mi');
-- hot_write_files_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
prompt
prompt This will identify any single file who's write I/O
prompt is more than 25% of the total write I/O of the database.
prompt
set pages 999
break on snap_time skip 2
col filename format a40
col phywrts format 999,999,999
col snap_time format a20
select
to_char(begin_interval_time,'yyyy-mm-dd hh24:mi') snap_time,
filename,
phywrts
from
dba_hist_filestatxs
natural join
dba_hist_snapshot
where
phywrts > 0
and
phywrts * 4 >
(
select
avg(value) all_phys_writes
from
dba_hist_sysstat
natural join
dba_hist_snapshot
where
stat_name = 'physical writes'
and
value > 0
)
order by
to_char(begin_interval_time,'yyyy-mm-dd hh24:mi'),
phywrts desc;
-- rpt_sysstat_hr_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
prompt This will query the dba_hist_sysstat view to
prompt display average values by hour of the day
set pages 999
break on snap_time skip 2
accept stat_name char prompt 'Enter Statistics Name: ';
col snap_time format a19
col avg_value format 999,999,999
select
to_char(begin_interval_time,'hh24') snap_time,
avg(value) avg_value
from
dba_hist_sysstat
natural join
dba_hist_snapshot
where
stat_name = '&stat_name'
group by
to_char(begin_interval_time,'hh24')
order by
to_char(begin_interval_time,'hh24');
-- rpt_sysstat_dy_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
prompt
prompt This will query the dba_hist_sysstat view to display
prompt average values by day-of-the-week
prompt
set pages 999
accept stat_name char prompt 'Enter Statistic Name: ';
-- wait_time_detail_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
prompt
prompt This will compare values from dba_hist_waitstat with
prompt detail information from dba_hist_active_sess_history.
prompt
set pages 999
set lines 80
break on snap_time skip 2
col snap_time heading 'Snap|Time' format a20
col file_name heading 'File|Name' format a40
col object_type heading 'Object|Type' format a10
col object_name heading 'Object|Name' format a20
col wait_count heading 'Wait|Count' format 999,999
col time heading 'Time' format 999,999
select
to_char(begin_interval_time,'yyyy-mm-dd hh24:mi') snap_time,
-- file_name,
object_type,
object_name,
wait_count,
time
from
dba_hist_waitstat wait,
dba_hist_snapshot snap,
dba_hist_active_sess_history ash,
dba_data_files df,
dba_objects obj
where
wait.snap_id = snap.snap_id
and wait.snap_id = ash.snap_id
and df.file_id = ash.current_file#
and obj.object_id = ash.current_obj#
and wait_count > 50
order by
to_char(begin_interval_time,'yyyy-mm-dd hh24:mi'),
file_name
;
-- optimizer_index_cost_adj.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
col c1 heading 'Average Waits for|Full Scan Read I/O' format 9999.999
col c2 heading 'Average Waits for|Index Read I/O' format 9999.999
col c3 heading 'Percent of| I/O Waits|for Full Scans' format 9.99
col c4 heading 'Percent of| I/O Waits|for Index Scans' format 9.99
col c5 heading 'Starting|Value|for|optimizer|index|cost|adj' format 999
select
a.average_wait c1,
b.average_wait c2,
a.total_waits /(a.total_waits + b.total_waits) c3,
b.total_waits /(a.total_waits + b.total_waits) c4,
(b.average_wait / a.average_wait)*100 c5
from
v$system_event a,
v$system_event b
where
a.event = 'db file scattered read'
and
b.event = 'db file sequential read'
;
-- reads_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
break on begin_interval_time skip 2
column phyrds format 999,999,999
column begin_interval_time format a25
select
begin_interval_time,
filename,
phyrds
from
dba_hist_filestatxs
natural join
dba_hist_snapshot;
-- wt_events_int_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select event
, waits "Waits"
, time "Wait Time (s)"
, pct*100 "Percent of Tot"
, waitclass "Wait Class"
from (select e.event_name event
, e.total_waits - nvl(b.total_waits,0) waits
, (e.time_waited_micro - nvl(b.time_waited_micro,0))/100000
0 time
, (e.time_waited_micro - nvl(b.time_waited_micro,0))/
(select sum(e1.time_waited_micro - nvl(b1.time_waited_mic
ro,0)) from dba_hist_system_event b1 , dba_hist_system_event e1
where b1.snap_id(+) = b.snap_id
and e1.snap_id = e.snap_id
and b1.dbid(+) = b.dbid
and e1.dbid = e.dbid
and b1.instance_number(+) = b.instance_number
and e1.instance_number = e.instance_number
and b1.event_id(+) = e1.event_id
and e1.total_waits > nvl(b1.total_waits,0)
and e1.wait_class <> 'Idle'
) pct
, e.wait_class waitclass
from
dba_hist_system_event b ,
dba_hist_system_event e
where b.snap_id(+) = &pBgnSnap
and e.snap_id = &pEndSnap
and b.dbid(+) = &pDbId
and e.dbid = &pDbId
and b.instance_number(+) = &pInstNum
and e.instance_number = &pInstNum
and b.event_id(+) = e.event_id
and e.total_waits > nvl(b.total_waits,0)
and e.wait_class <> 'Idle'
order by time desc, waits desc
)
-- sys_event_int_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
event "Event Name",
waits "Waits",
timeouts "Timeouts",
time "Wait Time (s)",
avgwait "Avg Wait (ms)",
waitclass "Wait Class"
from
(select e.event_name event
, e.total_waits - nvl(b.total_waits,0) waits
, e.total_timeouts - nvl(b.total_timeouts,0) timeouts
, (e.time_waited_micro - nvl(b.time_waited_micro,0))/1000000 time
, decode ((e.total_waits - nvl(b.total_waits, 0)), 0, to_number(NULL)
,
((e.time_waited_micro - nvl(b.time_waited_micro,0))/1000) / (e.total
_waits - nvl(b.total_waits,0)) ) avgwait
, e.wait_class waitclass
from
dba_hist_system_event b ,
dba_hist_system_event e
where
b.snap_id(+) = &pBgnSnap
and e.snap_id = &pEndSnap
and b.dbid(+) = &pDbId
and e.dbid = &pDbId
and b.instance_number(+) = &pInstNum
and e.instance_number = &pInstNum
and b.event_id(+) = e.event_id
and e.total_waits > nvl(b.total_waits,0)
and e.wait_class <> 'Idle' )
order by time desc, waits desc
-- bg_event_int_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
event "Event Name",
waits "Waits",
timeouts "Timeouts",
time "Wait Time (s)",
avgwait "Avg Wait (ms)",
waitclass "Wait Class"
from
(select e.event_name event
, e.total_waits - nvl(b.total_waits,0) waits
, e.total_timeouts - nvl(b.total_timeouts,0) timeouts
, (e.time_waited_micro - nvl(b.time_waited_micro,0))/1000000 time
, decode ((e.total_waits - nvl(b.total_waits, 0)), 0, to_number(NULL)
,
((e.time_waited_micro - nvl(b.time_waited_micro,0))/1000) / (e.total
_waits - nvl(b.total_waits,0)) ) avgwait
, e.wait_class waitclass
from
dba_hist_bg_event_summary b ,
dba_hist_bg_event_summary e
where
b.snap_id(+) = &pBgnSnap
and e.snap_id = &pEndSnap
and b.dbid(+) = &pDbId
and e.dbid = &pDbId
and b.instance_number(+) = &pInstNum
and e.instance_number = &pInstNum
and b.event_id(+) = e.event_id
and e.total_waits > nvl(b.total_waits,0)
and e.wait_class <> 'Idle' )
order by time desc, waits desc
-- wait_stat_int_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select e.class "E.CLASS"
, e.wait_count - nvl(b.wait_count,0) "Waits"
, e.time - nvl(b.time,0) "Total Wait Time (cs)"
, (e.time - nvl(b.time,0)) /
(e.wait_count - nvl(b.wait_count,0)) "Avg Time (cs)"
from dba_hist_waitstat b
, dba_hist_waitstat e
where b.snap_id = &pBgnSnap
and e.snap_id = &pEndSnap
and b.dbid = &pDbId
and e.dbid = &pDbId
and b.dbid = e.dbid
and b.instance_number = &pInstNum
and e.instance_number = &pInstNum
and b.instance_number = e.instance_number
and b.class = e.class
and b.wait_count < e.wait_count
order by 3 desc, 2 desc
-- enq_stat_int_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
ety Enqueue ,
reqs "Requests",
sreq "Successful Gets",
freq "Failed Gets",
waits "Waits",
wttm "Wait Time (s)",
awttm "Avg Wait Time(ms)"
from (
select /*+ ordered */
e.eq_type || '-' || to_char(nvl(l.name,' '))
|| decode( upper(e.req_reason)
, 'CONTENTION', null
, '-', null
, ' ('||e.req_reason||')') ety
, e.total_req# - nvl(b.total_req#,0) reqs
, e.succ_req# - nvl(b.succ_req#,0) sreq
, e.failed_req# - nvl(b.failed_req#,0) freq
, e.total_wait# - nvl(b.total_wait#,0) waits
, (e.cum_wait_time - nvl(b.cum_wait_time,0))/1000 wttm
, decode( (e.total_wait# - nvl(b.total_wait#,0))
, 0, to_number(NULL)
, ( (e.cum_wait_time - nvl(b.cum_wait_time,0))
/ (e.total_wait# - nvl(b.total_wait#,0))
)
) awttm
from dba_hist_enqueue_stat e
, dba_hist_enqueue_stat b
, v$lock_type l
where b.snap_id(+) = &pBgnSnap
and e.snap_id = &pEndSnap
and b.dbid(+) = &pDbId
and e.dbid = &pDbId
and b.dbid(+) = e.dbid
and b.instance_number(+) = &pInstNum
and e.instance_number = &pInstNum
and b.instance_number(+) = e.instance_number
and b.eq_type(+) = e.eq_type
and b.req_reason(+) = e.req_reason
and e.total_wait# - nvl(b.total_wait#,0) > 0
and l.type(+) = e.eq_type
order by wttm desc, waits desc)
-- metric_summary.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
metric_name Metric Name ,
metric_unit "Metric Unit",
minval "Minimum Value",
maxval "Maximum Value",
average "Average Value"
from
DBA_HIST_SYSMETRIC_SUMMARY
where
snap_id = &pEndSnap
and dbid = &pDbId
and instance_number = &pInstNum
-- sys_time_model_int_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
column "Statistic Name" format A40
column "Time (s)" format 999,999
column "Percent of Total DB Time" format 999,999
select e.stat_name "Statistic Name"
, (e.value - b.value)/1000000 "Time (s)"
, decode( e.stat_name,'DB time'
, to_number(null)
, 100*(e.value - b.value)
)/
( select nvl((e1.value - b1.value),-1)
from dba_hist_sys_time_model e1
, dba_hist_sys_time_model b1
where b1.snap_id = b.snap_id
and e1.snap_id = e.snap_id
and b1.dbid = b.dbid
and e1.dbid = e.dbid
and b1.instance_number = b.instance_number
and e1.instance_number = e.instance_number
and b1.stat_name = 'DB time'
and b1.stat_id = e1.stat_id
)
"Percent of Total DB Time"
from dba_hist_sys_time_model e
, dba_hist_sys_time_model b
where b.snap_id = &pBgnSnap
and e.snap_id = &pEndSnap
and b.dbid = &pDbId
and e.dbid = &pDbId
and b.instance_number = &pInst_Num
and e.instance_number = &pInst_Num
and b.stat_id = e.stat_id
and e.value - b.value > 0
order by 2 desc;
-- sys_stat_int_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select e.stat_name "Statistic Name"
, e.value - b.value "Total"
, round((e.value - b.value)/
( select
avg( extract( day from (e1.end_interval_time-b1.end_interval_time) )*24*6
0*60+
extract( hour from (e1.end_interval_time-b1.end_interval_time) )*60*6
0+
extract( minute from (e1.end_interval_time-b1.end_interval_time) )*60
+
extract( second from (e1.end_interval_time-b1.end_interval_time)) )
from dba_hist_snapshot b1
,dba_hist_snapshot e1
where b1.snap_id = b.snap_id
and e1.snap_id = e.snap_id
and b1.dbid = b.dbid
and e1.dbid = e.dbid
and b1.instance_number = b.instance_number
and e1.instance_number = e.instance_number
and b1.startup_time = e1.startup_time
and b1.end_interval_time < e1.end_interval_time ),2) "Per Second"
from dba_hist_sysstat b
, dba_hist_sysstat e
where b.snap_id = &pBgnSnap
and e.snap_id = &pEndSnap
and b.dbid = &pDbId
and e.dbid = &pDbId
and b.instance_number = &pInstNum
and e.instance_number = &pInstNum
and b.stat_id = e.stat_id
and e.stat_name not in ( 'logons current'
, 'opened cursors current'
, 'workarea memory allocated'
)
and e.value >= b.value
and e.value > 0
order by 1 asc
-- latch_int_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select e.latch_name "Latch Name"
, e.gets - b.gets "Get Requests"
, to_number(decode(e.gets, b.gets, null,
(e.misses - b.misses) * 100/(e.gets - b.gets))) "Percent Get Misses"
, to_number(decode(e.misses, b.misses, null,
(e.sleeps - b.sleeps)/(e.misses - b.misses))) "Avg Sleeps / Miss"
, (e.wait_time - b.wait_time)/1000000 "Wait Time (s)"
, e.immediate_gets - b.immediate_gets "No Wait Requests"
, to_number(decode(e.immediate_gets,
b.immediate_gets, null,
(e.immediate_misses - b.immediate_misses) * 100 /
(e.immediate_gets - b.immediate_gets))) "Percent N
o Wait Miss"
from dba_hist_latch b
, dba_hist_latch e
where b.snap_id = &pBgnSnap
and e.snap_id = &pEndSnap
and b.dbid = &pDbId
and e.dbid = &pDbId
and b.dbid = e.dbid
and b.instance_number = &pInstNum
and e.instance_number = &pInstNum
and b.instance_number = e.instance_number
and b.latch_hash = e.latch_hash
and e.gets - b.gets > 0
order by 1, 4
-- latch_miss_int_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select latchname "Latch Name",
nwmisses "No Wait Misses",
sleeps "Sleeps",
waiter_sleeps "Waiter Sleeps"
From (
select e.parent_name||' '||e.where_in_code latchname
, e.nwfail_count - nvl(b.nwfail_count,0) nwmisses
, e.sleep_count - nvl(b.sleep_count,0) sleeps
, e.wtr_slp_count - nvl(b.wtr_slp_count,0) waiter_sleeps
from dba_hist_latch_misses_summary b
, dba_hist_latch_misses_summary e
where b.snap_id(+) = &pBgnSnap
and e.snap_id = &pEndSnap
and b.dbid(+) = &pDbId
and e.dbid = &pDbId
and b.dbid(+) = e.dbid
and b.instance_number(+) = &pInstNum
and e.instance_number = &pInstNum
and b.instance_number(+) = e.instance_number
and b.parent_name(+) = e.parent_name
and b.where_in_code(+) = e.where_in_code
and e.sleep_count > nvl(b.sleep_count,0)
)
order by 1, 3 desc
-- lib_cache_int_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select b.namespace "Name Space"
, e.gets - b.gets "Get Requests"
, to_number(decode(e.gets,b.gets,null,
100 - (e.gethits - b.gethits) * 100/(e.gets - b.gets))) "Get Pct Miss"
, e.pins - b.pins "Pin Requests"
, to_number(decode(e.pins,b.pins,null,
100 - (e.pinhits - b.pinhits) * 100/(e.pins - b.pins))) "Pin Pct Miss"
, e.reloads - b.reloads "Reloads"
, e.invalidations - b.invalidations "Invalidations"
from dba_hist_librarycache b
, dba_hist_librarycache e
where b.snap_id = &pBgnSnap
and e.snap_id = &pEndSnap
and b.dbid = &pDbId
and e.dbid = &pDbId
and b.dbid = e.dbid
and b.instance_number = &pInstNum
and e.instance_number = &pInstNum
and b.instance_number = e.instance_number
and b.namespace = e.namespace
-- rowcache_int_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
param "Parameter",
gets "Get Requests",
getm "Pct Miss"
From
(select lower(b.parameter) param
, e.gets - b.gets gets
, to_number(decode(e.gets,b.gets,null,
(e.getmisses - b.getmisses) * 100/(e.gets - b.gets))) getm
, e.scans - b.scans scans
, to_number(decode(e.scans,b.scans,null,
(e.scanmisses - b.scanmisses) * 100/(e.scans - b.scans))) scanm
, e.modifications - b.modifications mods
, e.usage usage
from dba_hist_rowcache_summary b
, dba_hist_rowcache_summary e
where b.snap_id = &pBgnSnap
and e.snap_id = &pEndSnap
and b.dbid = &pDbId
and e.dbid = &pDbId
and b.dbid = e.dbid
and b.instance_number = &pInstNum
and e.instance_number = &pInstNum
and b.instance_number = e.instance_number
and b.parameter = e.parameter
and e.gets - b.gets > 0 )
order by param;
-- Buf_pool_int_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
name
, numbufs "Number of Buffers"
, buffs "Buffer Gets"
, conget "Consistent Gets"
, phread "Physical Reads"
, phwrite "Physical Writes"
, fbwait "Free Buffer Waits"
, bbwait "Buffer Busy Waits"
, wcwait "Write Complete Waits"
, poolhr "Pool Hit %"
From
(select e.name
, e.set_msize numbufs
, decode( e.db_block_gets - nvl(b.db_block_gets,0)
+ e.consistent_gets - nvl(b.consistent_gets,0)
, 0, to_number(null)
, (100* (1 - ( (e.physical_reads - nvl(b.physical_reads,0))
/ ( e.db_block_gets - nvl(b.db_block_gets,0)
+ e.consistent_gets - nvl(b.consistent_gets,0))
)
)
)
) poolhr
, e.db_block_gets - nvl(b.db_block_gets,0)
+ e.consistent_gets - nvl(b.consistent_gets,0) buffs
, e.consistent_gets - nvl(b.consistent_gets,0) conget
, e.physical_reads - nvl(b.physical_reads,0) phread
, e.physical_writes - nvl(b.physical_writes,0) phwrite
, e.free_buffer_wait - nvl(b.free_buffer_wait,0) fbwait
, e.write_complete_wait - nvl(b.write_complete_wait,0) wcwait
, e.buffer_busy_wait - nvl(b.buffer_busy_wait,0) bbwait
from dba_hist_buffer_pool_stat b
, dba_hist_buffer_pool_stat e
where b.snap_id(+) = &pBgnSnap
and e.snap_id = &pEndSnap
and b.dbid(+) = &pDbId
and e.dbid = &pDbId
and b.dbid(+) = e.dbid
and b.instance_number(+) = &pInst_Num
and e.instance_number = &pInst_Num
and b.instance_number(+) = e.instance_number
and b.id(+) = e.id)
order by 1
-- os_stat_int_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select e.stat_name "Statistic Name"
, decode(e.stat_name, 'NUM_CPUS', e.value, e.value - b.value) "Total"
, decode( instrb(e.stat_name, 'BYTES'), 0, to_number(null)
, round((e.value - b.value)/( select
avg( extract( day from (e1.end_interval_time-b1.end_interval_time) )*24*6
0*60+
extract( hour from (e1.end_interval_time-b1.end_interval_time) )*60*6
0+
extract( minute from (e1.end_interval_time-b1.end_interval_time) )*60
+
extract( second from (e1.end_interval_time-b1.end_interval_time)) )
from dba_hist_snapshot b1
,dba_hist_snapshot e1
where b1.snap_id = b.snap_id
and e1.snap_id = e.snap_id
and b1.dbid = b.dbid
and e1.dbid = e.dbid
and b1.instance_number = b.instance_number
and e1.instance_number = e.instance_number
and b1.startup_time = e1.startup_time
and b1.end_interval_time < e1.end_interval_time ),2)) "Per Second"
from dba_hist_osstat b
, dba_hist_osstat e
where b.snap_id = &pBgnSnap
and e.snap_id = &pEndSnap
and b.dbid = &pDbId
and e.dbid = &pDbId
and b.instance_number = &pInstNum
and e.instance_number = &pInstNum
and b.stat_id = e.stat_id
and e.value >= b.value
and e.value > 0
order by 1 asc;
-- high_sql_buf_gets.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
sql_id
, buffer_gets_total "Buffer Gets"
, executions_total "Executions"
, buffer_gets_total/executions_total "Gets / Exec"
, pct*100 "% Total"
, cpu_time_total/1000000 "CPU Time (s)"
, elapsed_time_total/1000000 "Elapsed Time (s)"
, module "SQL Module"
, stmt "SQL Statement"
from
(select
e.sql_id sql_id
, e.buffer_gets_total - nvl(b.buffer_gets_total,0) buffer_gets_tot
al
, e.executions_total - nvl(b.executions_total,0) executions_total
, (e.buffer_gets_total - nvl(b.buffer_gets_total,0))/
( select e1.value - nvl(b1.value,0)
from dba_hist_sysstat b1 , dba_hist_sysstat e1
where b1.snap_id(+) = b.snap_id
and e1.snap_id = e.snap_id
and b1.dbid(+) = b.dbid
and e1.dbid = e.dbid
and b1.instance_number(+) = b.instance_number
and e1.instance_number = e.instance_number
and b1.stat_id = e1.stat_id
and e1.stat_name = 'session logical reads'
) pct
, e.elapsed_time_total - nvl(b.elapsed_time_total,0) elapsed_time_
total
, e.cpu_time_total - nvl(b.cpu_time_total,0) cpu_time_total
, e.module
, t.sql_text stmt
from dba_hist_sqlstat e
, dba_hist_sqlstat b
, dba_hist_sqltext t
where b.snap_id(+) = @pBgnSnap
and b.dbid(+) = e.dbid
and b.instance_number(+) = e.instance_number
and b.sql_id(+) = e.sql_id
and e.snap_id = &pEndSnap
and e.dbid = &pDBId
and e.instance_number = &pInstNum
and (e.executions_total - nvl(b.executions_total,0)) > 0
and t.sql_id = b.sql_id
)
order by 2 desc;
-- seg_top_logreads_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
object_name "Object Name"
, tablespace_name "Tablespace Name"
, object_type "Object Type"
, logical_reads_total "Logical Reads"
, ratio "%Total"
from(
select n.owner||'.'||n.object_name||decode(n.subobject_name,null,null,'.'||n.sub
object_name) object_name
, n.tablespace_name
, case when length(n.subobject_name) < 11 then
n.subobject_name
else
substr(n.subobject_name,length(n.subobject_name)-9)
end subobject_name
, n.object_type
, r.logical_reads_total
, round(r.ratio * 100, 2) ratio
from dba_hist_seg_stat_obj n
, (select *
from (select e.dataobj#
, e.obj#
, e.dbid
, e.logical_reads_total - nvl(b.logical_reads_total, 0) log
ical_reads_total
, ratio_to_report(e.logical_reads_total - nvl(b.logical_rea
ds_total, 0)) over () ratio
from dba_hist_seg_stat e
, dba_hist_seg_stat b
where b.snap_id = 2694
and e.snap_id = 2707
and b.dbid = 37933856
and e.dbid = 37933856
and b.instance_number = 1
and e.instance_number = 1
and e.obj# = b.obj#
and e.dataobj# = b.dataobj#
and e.logical_reads_total - nvl(b.logical_reads_total, 0) >
0
order by logical_reads_total desc) d
where rownum <= 100) r
where n.dataobj# = r.dataobj#
and n.obj# = r.obj#
and n.dbid = r.dbid
)
order by logical_reads_total desc;
-- db_tbsp_io_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select tbsp Tablespace
, ios "I/O Activity"
From (
select e.tsname tbsp
, sum (e.phyrds - nvl(b.phyrds,0)) +
sum (e.phywrts - nvl(b.phywrts,0)) ios
from dba_hist_filestatxs e
, dba_hist_filestatxs b
where b.snap_id(+) = &pBgnSnap
ande.snap_id = &pEndSnap
andb.dbid(+) = &pDbId
ande.dbid = &pDbId
andb.dbid(+) = e.dbid
andb.instance_number(+) = &pInstNum
ande.instance_number = &pInstNum
andb.instance_number(+) = e.instance_number
andb.file# = e.file#
and( (e.phyrds - nvl(b.phyrds,0) ) +
(e.phywrts - nvl(b.phywrts,0)) ) > 0
group by e.tsname
union
select e.tsname tbsp
, sum (e.phyrds - nvl(b.phyrds,0)) +
sum (e.phywrts - nvl(b.phywrts,0)) ios
from dba_hist_tempstatxs e
, dba_hist_tempstatxs b
where b.snap_id(+) = &pBgnSnap
and e.snap_id = &pEndSnap
and b.dbid(+) = &pDbId
and e.dbid = &pDbId
and b.dbid(+) = e.dbid
and b.instance_number(+) = &pInstNum
and e.instance_number = &pInstNum
and b.instance_number(+) = e.instance_number
and b.file# = e.file#
and ( (e.phyrds - nvl(b.phyrds,0) ) +
(e.phywrts - nvl(b.phywrts,0) ) ) > 0
group by e.tsname
)
-- awr_settings.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
extract( day from snap_interval) *24*60+
extract( hour from snap_interval) *60+
extract( minute from snap_interval ) "Snapshot Interval",
extract( day from retention) *24*60+
extract( hour from retention) *60+
extract( minute from retention ) "Retention Interval"
from dba_hist_wr_control;
-- wait_class_pct_ash.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
column TOTAL_WAITS format 999,999,999
column PCT_WAITS format 99.99
column TIME_WAITED format 999,999,999
column PCT_TIME format 99.99
column WAIT_CLASS format A20
SELECT wait_class,
total_waits,
ROUND(100 * (total_waits / sum_waits),2) pct_waits,
time_waited,
ROUND(100 * (time_waited / sum_time),2) pct_time
FROM
(SELECT wait_class,
total_waits,
time_waited
FROM v$system_wait_class
WHERE wait_class != 'Idle'),
(SELECT SUM(total_waits) sum_waits,
SUM(time_waited) sum_time
FROM v$system_wait_class
WHERE wait_class != 'Idle')
ORDER BY 5 DESC;
-- hot_files_ash.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
f.file_name Data File ,
COUNT(*) Wait Number ,
SUM(h.time_waited) Total Time Waited
FROM
v$active_session_history h,
dba_data_files f
WHERE
h.current_file# = f.file_id
GROUP BY f.file_name
ORDER BY 3 DESC
-- events_waits_hr_ash.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
h.event "Wait Event",
SUM(h.wait_time + h.time_waited) "Total Wait Time"
FROM
v$active_session_history h,
v$event_name e
WHERE
h.sample_time BETWEEN sysdate - 1/24 AND sysdate
AND h.event_id = e.event_id
AND e.wait_class <> 'Idle'
GROUP BY h.event
ORDER BY 2 DESC
-- user_waits_hr_ash.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
s.sid,
s.username,
SUM(h.wait_time + h.time_waited) "total wait time"
FROM
v$active_session_history h,
v$session s,
v$event_name e
WHERE
h.sample_time BETWEEN sysdate - 1/24 AND sysdate
AND h.session_id = s.sid
AND e.event_id = h.event_id
AND e.wait_class <> 'Idle'
AND s.username IS NOT NULL
GROUP BY
s.sid, s.username
ORDER BY 3
-- sql_waits_hr_ash.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
h.user_id,
u.username,
sql.sql_text,
SUM(h.wait_time + h.time_waited) "total wait time"
FROM
v$active_session_history h,
v$sqlarea sql,
dba_users u,
v$event_name e
WHERE
h.sample_time BETWEEN sysdate - 1/24 AND sysdate
AND h.sql_id = sql.sql_id
AND h.user_id = u.user_id
AND h.sql_id is not null
AND e.event_id = h.event_id
AND e.wait_class <> 'Idle'
GROUP BY
h.user_id,sql.sql_text, u.username
ORDER BY 4 DESC
-- object_waits_hr_ash.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
o.owner,
o.object_name,
o.object_type,
SUM(h.wait_time + h.time_waited) "total wait time"
FROM
v$active_session_history h,
dba_objects o,
v$event_name e
WHERE
h.sample_time BETWEEN sysdate - 1/24 AND sysdate
AND h.current_obj# = o.object_id
AND e.event_id = h.event_id
AND e.wait_class <> 'Idle'
GROUP BY
o.owner, o.object_name, o.object_type
ORDER BY 4 DESC
-- sess_waits_ash.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT b.username,
a.stat_name,
round((a.value / 1000000),3) time_secs
FROM v$sess_time_model a,
v$session b
WHERE a.sid = b.sid AND
b.sid = 123
ORDER BY 3 DESC
-- bhr_hr_ash.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
Buffer Cache Hit Ratio Metric Name ,
to_char(begin_time, hh24:mi:ss ) Begin ,
to_char(end_time, hh24:mi:ss ) End ,
round(value,2) Value
FROM
v$sysmetric_history
WHERE
Metric_name = Buffer Cache Hit Ratio
ORDER BY
Begin_time DESC;
-- class_waits_hr_ash.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
c.wait_class "Wait Class",
to_char(h.begin_time,'hh24:mi:ss') "Begin",
to_char(h.end_time,'hh24:mi:ss') "End",
h.average_waiter_count,
h.time_waited,
h.wait_count
FROM
v$waitclassmetric_history h,
v$system_wait_class c
WHERE
c.wait_class_id = h.wait_class_id
AND c.wait_class = 'User I/O'
ORDER BY
h.begin_time DESC
-- file_reads_hr_ash.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
f.file_name,
to_char(h.begin_time,'hh24:mi:ss') "Begin",
to_char(h.end_time,'hh24:mi:ss') "End",
h.AVERAGE_READ_TIME,
h.PHYSICAL_READS
FROM
v$filemetric_history h,
dba_data_files f
WHERE
h.file_id = f.file_id
AND f.file_id = 3
ORDER BY
h.begin_time DESC
-- metric_values.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
to_char(m.begin_time,'hh24:mi') "start time",
to_char(m.end_time,'hh24:mi') "end time",
m.value "current value",
s.average "average value",
m.metric_name,
m.metric_unit
FROM
v$sysmetric m,
v$sysmetric_summary s
WHERE
m.metric_id = s.metric_id
AND s.average > 0
AND ((m.value - s.average)/s.average)*100 >= 10
AND lower(m.metric_name) NOT LIKE '%ratio%';
-- cpu_hot_sessions.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
s.sid,
s.username
FROM
v$sessmetric sm,
v$session s
WHERE
s.sid = sm.session_id
AND
(sm.cpu/(SELECT decode(value,0,-1)
FROM
v$sysmetric
WHERE
metric_name = 'cpu usage per sec')
*100) > 1;
-- wait_class.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
c.wait_class "Wait Class",
to_char(h.begin_time,'hh24:mi:ss') "Begin",
to_char(h.end_time,'hh24:mi:ss') "End",
h.average_waiter_count,
h.time_waited,
h.wait_count
FROM
v$waitclassmetric_history h,
v$system_wait_class c
WHERE
c.wait_class_id = h.wait_class_id
AND
c.wait_class = 'Application' - plug-in your metric name here
ORDER BY
h.begin_time DESC;
-- metric_by_time.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
to_char(m.begin_time,'hh24:mi') "start time",
to_char(m.end_time,'hh24:mi') "end time",
n.name,
m.time_waited,
m.num_sess_waiting,
m.wait_count
FROM
v$eventmetric m,
v$event_name n
WHERE
m.event_id = n.event_id
AND n.wait_class <> 'Idle' -- add your event metric name here
AND m.time_waited > 0
ORDER BY 4 DESC;
-- avg_io_time.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
to_char(m.begin_time,'hh24:mi') "start time",
to_char(m.end_time,'hh24:mi') "end time",
f.file_name,
s.lstiotim "last i/o time",
m.average_read_time + m.average_write_time "average i/o time"
FROM
v$filemetric m,
dba_data_files f,
v$filestat s
WHERE
m.file_id = f.file_id
AND s.file# = f.file_id
AND s.lstiotim > (m.average_read_time + m.average_write_time);
-- metric_by_time.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
to_char(m.begin_time,'hh24:mi') "start time",
to_char(m.end_time,'hh24:mi') "end time",
m.service_name,
m.elapsedpercall "elapsed time",
m.cpupercall "cpu time"
FROM
v$servicemetric_history m
WHERE
m.service_name = 'dbdabr' add your service name here
ORDER BY
m.end_time DESC;
-- awr_settings.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
extract( day from snap_interval) *24*60+
extract( hour from snap_interval) *60+
extract( minute from snap_interval ) "Snapshot Interval",
extract( day from retention) *24*60+
extract( hour from retention) *60+
extract( minute from retention ) "Retention Interval"
from dba_hist_wr_control;
-- dba_advisor_display.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
r.type,
r.Rank,
r.benefit,
f.impact_type,
f.impact,
f.message
FROM
dba_advisor_recommendations r,
dba_advisor_findings f
WHERE
r.task_name = 'TASK_4502'
AND r.finding_id = f.finding_id
AND r.task_id = f.task_id
ORDER BY r.rank ASC, r.benefit DESC;
DECLARE
W_name VARCHAR2(100);
BEGIN
W_name := SQL_WRKLD_1 ;
dbms_advisor.create_sqlwkld (W_name);
END;
/
-- dbms_advisor_mark.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
set feedback 1
set linesize 80
set trimspool on
set tab off
set pagesize 60
whenever sqlerror CONTINUE
CREATE BITMAP INDEX "SPV"."_IDX$$_11A40001"
ON "SPV"."SPV_BASELINES"
("AWR")
COMPUTE STATISTICS;
CREATE INDEX "PERFSTAT"."_IDX$$_11A40002"
ON "PERFSTAT"."STATS$UNDOSTAT"
("DBID","INSTANCE_NUMBER")
COMPUTE STATISTICS;
/* RETAIN INDEX "SPV"."SPV_ALERT_DEF_PK" */
/* RETAIN INDEX "PERFSTAT"."STATS$DATABASE_INSTANCE_PK" */
/* RETAIN INDEX "PERFSTAT"."STATS$STATSPACK_PARAMETER_PK" */
whenever sqlerror EXIT SQL.SQLCODE
begin
dbms_advisor.mark_recommendation('SQL_ACC_TASK1',1,'IMPLEMENTED');
dbms_advisor.mark_recommendation('SQL_ACC_TASK1',2,'IMPLEMENTED');
dbms_advisor.mark_recommendation('SQL_ACC_TASK1',3,'IMPLEMENTED');
dbms_advisor.mark_recommendation('SQL_ACC_TASK1',4,'IMPLEMENTED');
end;
/
-- sys_time_model_pct_db_time.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
e.stat_name "E.STAT_NAME"
, Round((e.value - b.value)/1000000,2)"Time (s)"
, Round(decode( e.stat_name,'DB time'
, to_number(null)
, 100*(e.value - b.value)
)/
(SELECT NVL((e1.value - b1.value),-1)
FROM dba_hist_sys_time_model e1
, dba_hist_sys_time_model b1
WHERE b1.snap_id = b.snap_id
AND e1.snap_id = e.snap_id
AND b1.dbid = b.dbid
AND e1.dbid = e.dbid
AND b1.instance_number = b.instance_number
AND e1.instance_number = e.instance_number
AND e1.stat_name = 'DB time'
AND b1.stat_id = e1.stat_id ),2) "Percent of Total DB Time"
FROM dba_hist_sys_time_model e
, dba_hist_sys_time_model b
WHERE b.snap_id = &pBgnSnap
AND e.snap_id = &pEndSnap
AND b.dbid = &pDbId
AND e.dbid = &pDbId
AND b.instance_number = &pInstNum
AND e.instance_number = &pInstNum
AND b.stat_id = e.stat_id
AND e.value - b.value > 0
ORDER BY 2 DESC
from
v$system_event
where
event like %wait% ;
-- display_cache_advice.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
column c1 heading 'Cache Size (meg)' format 999,999,999,999
column c2 heading 'Buffers' format 999,999,999
column c3 heading 'Estd Phys|Read Factor' format 999.90
column c4 heading 'Estd Phys| Reads' format 999,999,999
select
size_for_estimate c1,
buffers_for_estimate c2,
estd_physical_read_factor c3,
estd_physical_reads c4
from
v$db_cache_advice
where
name = 'DEFAULT'
and
block_size = (SELECT value FROM V$PARAMETER
WHERE name = 'db_block_size')
and
advice_status = 'ON';
-- rpt_sysstat_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
prompt
prompt This will query the dba_hist_sysstat view to display all values
prompt that exceed the value specified in
prompt the "where" clause of the query.
prompt
set pages 999
break on snap_time skip 2
accept stat_name char prompt 'Enter Statistic Name: ';
accept stat_value number prompt 'Enter Statistics Threshold value: ';
-- hot_write_files_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
prompt This will identify any single file who's write I/O
prompt is more than 25% of the total write I/O of the database.
prompt
set pages 999
break on snap_time skip 2
col filename format a40
col phywrts format 999,999,999
col snap_time format a20
select
to_char(begin_interval_time,'yyyy-mm-dd hh24:mi') snap_time,
filename,
phywrts
from
dba_hist_filestatxs
natural join
dba_hist_snapshot
where
phywrts > 0
and
phywrts * 4 >
(
select
avg(value) all_phys_writes
from
dba_hist_sysstat
natural join
dba_hist_snapshot
where
stat_name = 'physical writes'
and
value > 0
)
order by
to_char(begin_interval_time,'yyyy-mm-dd hh24:mi'),
phywrts desc
;
-- wait_time_detail_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
prompt
prompt This will compare values from dba_hist_waitstat with
prompt detail information from dba_hist_active_sess_history.
prompt
set pages 999
set lines 80
break on snap_time skip 2
col snap_time heading 'Snap|Time' format a20
col file_name heading 'File|Name' format a40
col object_type heading 'Object|Type' format a10
col object_name heading 'Object|Name' format a20
col wait_count heading 'Wait|Count' format 999,999
col time heading 'Time' format 999,999
select
to_char(begin_interval_time,'yyyy-mm-dd hh24:mi') snap_time,
-- file_name,
object_type,
object_name,
wait_count,
time
from
dba_hist_waitstat wait,
dba_hist_snapshot snap,
dba_hist_active_sess_history ash,
dba_data_files df,
dba_objects obj
where
wait.snap_id = snap.snap_id
and
wait.snap_id = ash.snap_id
and
df.file_id = ash.current_file#
and
obj.object_id = ash.current_obj#
and
wait_count > 50
order by
to_char(begin_interval_time,'yyyy-mm-dd hh24:mi'),
file_name
;
-- awr_sql_index_freq.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- awr_top_tables_phyrd.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- awr_sql_object_freq.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- multiblock_read_test.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
--------------------------------------------------------------------
--
-- Script: multiblock_read_test.sql
-- Purpose: find largest actual multiblock read size
--
-- Copyright: (c) Ixora Pty Ltd
-- Author: Steve Adams
--
-- Description:This script prompts the user to enter the name of a
-- table to scan, and then does so with a large multiblock read
-- count, and with event 10046 enabled at level 8. The trace file
-- is then examined to find the largest multiblock
-- read actually performed.
--
--------------------------------------------------------------------
@save_sqlplus_settings
alter session set db_file_multiblock_read_count = 32768;
/
column value heading "Maximum possible multiblock read count"
select
value
from
sys.v_$parameter
where
name = 'db_file_multiblock_read_count'
/
prompt
@accept Table "Table to scan" SYS.SOURCE$
prompt Scanning ...
set termout off
alter session set events '10046 trace name context forever, level 8'
/
select /*+ full(t) noparallel(t) nocache(t) */ count(*) from &Table t
/
alter session set events '10046 trace name context off'
/
set termout on
@trace_file_name
prompt
prompt Maximum effective multiblock read count
prompt ----------------------------------------
host sed -n '/scattered/s/.*p3=//p' &Trace_Name | sort -n | tail -1
@restore_sqlplus_settings
-- display_multi_buffers.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
decode(
pd.bp_id,
1,'KEEP',
2,'RECYCLE',
3,'DEFAULT',
4,'2K SUBCACHE',
5,'4K SUBCACHE',
6,'8K SUBCACHE',
7,'16K SUBCACHE',
8,'32K SUBCACHE',
'UNKNOWN') subcache,
bh.object_name,
bh.blocks
from
x$kcbwds ds,
x$kcbwbpd pd,
(select /*+ use_hash(x) */
set_ds,
o.name object_name,
count(*) BLOCKS
from
obj$ o,
x$bh x
where
o.dataobj# = x.obj
and
x.state !=0
and
o.owner# !=0
group by
set_ds,o.name) bh
where
ds.set_id >= pd.bp_lo_sid
and
ds.set_id <= pd.bp_hi_sid
and
pd.bp_size != 0 and ds.addr=bh.set_ds;
-- fileio7.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
d.name file_name,
c.name tablespace_name,
b.phyrds,
b.phywrts,
b.phyblkrd,
b.phyblkwrt,
b.readtim,
b.writetim
from
sys.v_$datafile a,
sys.v_$filestat b,
sys.ts$ c,
sys.v_$dbfile d,
sys.file$ e
where
a.file# = b.file#
and
a.file# = d.file#
and
e.ts# = c.ts#
and
e.file# = d.file#
order by
b.phyrds desc;
-- fileio8plus.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
d.name file_name,
c.name tablespace_name,
b.phyrds,
b.phywrts,
b.phyblkrd,
b.phyblkwrt,
b.readtim,
b.writetim
from
sys.v_$datafile a,
sys.v_$filestat b,
sys.ts$ c,
sys.v_$dbfile d,
sys.file$ e
where
a.file# = b.file#
and
a.file# = d.file#
and
e.ts# = c.ts#
and
e.file# = d.file#
union all
select
v.fnnam file_name,
c.name tablespace_name,
b.phyrds,
b.phywrts,
b.phyblkrd,
b.phyblkwrt,
b.readtim,
b.writetim
from
sys.v_$tempfile a,
sys.v_$tempstat b,
sys.ts$ c,
sys.x$kccfn v,
sys.x$ktfthc hc
where
a.file# = b.file#
and
a.file# = hc.ktfthctfno
and
hc.ktfthctsn = c.ts#
and
v.fntyp = 7
and
v.fnnam is not null
and
v.fnfno = hc.ktfthctfno
and
hc.ktfthctsn = c.ts#
order by
3 desc;
-- globiostats.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
name,
value
from
sys.v_$sysstat
where
name in
('consistent changes',
'consistent gets',
'db block changes',
'db block gets',
'physical reads',
'physical writes',
'sorts (disk)',
'user commits',
'user rollbacks'
)
order by
1;
-- buffratio.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
100 -
100 *
(round ((sum (decode (name, 'physical reads',
value, 0))
-
sum (decode (name, 'physical reads direct',
value, 0)) -
sum (decode (name,
'physical reads direct (lob)',
value, 0))) /
(sum (decode (name, 'session logical reads',
value, 1))
),3)) hit_ratio
from
sys.v_$sysstat
where
name in
('session logical reads',
'physical reads direct (lob)',
'physical reads',
'physical reads direct');
-- fileio.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
rem
rem NAME: fileio.sql
rem
rem FUNCTION: Reports on the file io status of all of the
rem FUNCTION: datafiles in the database.
rem
column sum_io1 new_value st1 noprint
column sum_io2 new_value st2 noprint
column sum_io new_value divide_by noprint
column Percent format 999.999 heading 'Percent|Of IO'
column brratio format 999.99 heading 'Block|Read|Ratio'
column bwratio format 999.99 heading 'Block|Write|Ratio'
column phyrds heading 'Physical | Reads'
column phywrts heading 'Physical | Writes'
column phyblkrd heading 'Physical|Block|Reads'
column phyblkwrt heading 'Physical|Block|Writes'
column name format a45 heading 'File|Name'
column file# format 9999 heading 'File'
column dt new_value today noprint
select to_char(sysdate,'ddmonyyyyhh24miss') dt from dual;
set feedback off verify off lines 132 pages 60 sqlbl on trims on
rem
select
nvl(sum(a.phyrds+a.phywrts),0) sum_io1
from
sys.v_$filestat a;
select nvl(sum(b.phyrds+b.phywrts),0) sum_io2
from
sys.v_$tempstat b;
select &st1+&st2 sum_io from dual;
rem
@title132 'File I/O Statistics Report'
spool rep_out\&db\fileio&&today
select
a.file#,b.name, a.phyrds, a.phywrts,
(100*(a.phyrds+a.phywrts)/÷_by) Percent,
a.phyblkrd, a.phyblkwrt, (a.phyblkrd/greatest(a.phyrds,1)) brratio,
(a.phyblkwrt/greatest(a.phywrts,1)) bwratio
from
sys.v_$filestat a, sys.v_$dbfile b
where
a.file#=b.file#
union
select
c.file#,d.name, c.phyrds, c.phywrts,
(100*(c.phyrds+c.phywrts)/÷_by) Percent,
c.phyblkrd, c.phyblkwrt,(c.phyblkrd/greatest(c.phyrds,1)) brratio,
(c.phyblkwrt/greatest(c.phywrts,1)) bwratio
from
sys.v_$tempstat c, sys.v_$tempfile d
where
c.file#=d.file#
order by
1
/
spool off
pause Press enter to continue
set feedback on verify on lines 80 pages 22
clear columns
ttitle off
-- get_io.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
set serveroutput on
declare
cursor get_io is select
nvl(sum(a.phyrds+a.phywrts),0) sum_io1,to_number(null) sum_io2
from sys.gv_$filestat a
union
select
to_number(null) sum_io1, nvl(sum(b.phyrds+b.phywrts),0) sum_io2
from
sys.gv_$tempstat b;
now date;
elapsed_seconds number;
sum_io1 number;
sum_io2 number;
sum_io12 number;
sum_io22 number;
tot_io number;
tot_io_per_sec number;
fixed_io_per_sec number;
temp_io_per_sec number;
begin
open get_io;
for i in 1..2 loop
fetch get_io into sum_io1, sum_io2;
if i = 1 then sum_io12:=sum_io1;
else
sum_io22:=sum_io2;
end if;
end loop;
select sum_io12+sum_io22 into tot_io from dual;
select sysdate into now from dual;
select ceil((now-max(startup_time))*(60*60*24)) into elapsed_seconds from gv$ins
tance;
fixed_io_per_sec:=sum_io12/elapsed_seconds;
temp_io_per_sec:=sum_io22/elapsed_seconds;
tot_io_per_sec:=tot_io/elapsed_seconds;
dbms_output.put_line('Elapsed Sec :'||to_char(elapsed_seconds, '9,999,999.99'));
dbms_output.put_line('Fixed IO/SEC:'||to_char(fixed_io_per_sec,'9,999,999.99'));
dbms_output.put_line('Temp IO/SEC :'||to_char(temp_io_per_sec, '9,999,999.99'));
dbms_output.put_line('Total IO/SEC:'||to_char(tot_io_Per_Sec, '9,999,999.99'));
end;
/
-- wait_report.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
col event format a30 heading 'Event Name'
col waits format 999,999,999 heading 'Total|Waits'
col average_wait format 999,999,999 heading 'Average|Waits'
col time_waited format 999,999,999 heading 'Time Waited'
col total_time new_value divide_by noprint
col value new_value val noprint
col percent format 999.990 heading 'Percent|Of|Non-Idle Waits'
col duration new_value millisec noprint
col p_of_total heading 'Percent|of Total|Uptime' format 999.9999
set lines 132 feedback off verify off pages 50
select to_number(sysdate-startup_time)*86400*1000 duration from v$instance;
select
sum(time_waited) total_time
from v$system_event
where total_waits-total_timeouts>0
and event not like 'SQL*Net%'
and event not like 'smon%'
and event not like 'pmon%'
and event not like 'rdbms%'
and event not like 'PX%'
and event not like 'sbt%'
and event not in ('gcs remote message','ges remote message','virtual cir
cuit status','dispatcher timer') ;
select value from v$sysstat where name ='CPU used when call started';
@title132 'System Events Percent'
break on report
compute sum of time_waited on report
spool rep_out/&db/sys_events
select name event,
0 waits,
0 average_wait,
value time_waited,
value/(&÷_by+&&val)*100 Percent,
value/&&millisec*100 p_of_total
from v$sysstat
where name ='CPU used when call started'
union
select event,
total_waits-total_timeouts waits,
time_waited/(total_waits-total_timeouts) average_wait,
time_waited,
time_waited/(&÷_by+&&val)*100 Percent,
time_waited/&&millisec*100 P_of_total
from v$system_event
where total_waits-total_timeouts>0
and event not like 'SQL*Net%'
and event not like 'smon%'
and event not like 'pmon%'
and event not like 'rdbms%'
and event not like 'PX%'
and event not like 'sbt%'
and event not in ('gcs remote message','ges remote message','virtual cir
cuit status','dispatcher timer')
and time_waited>0
order by percent desc
/
spool off
clear columns
ttitle off
clear computes
clear breaks
-- toptables.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
table_owner "table owner",
table_name "table name",
command "command issued",
0 - executions "executions",
disk_reads "disk reads",
gets "buffer gets",
rows_processed "rows processed"
from
(select
distinct executions,
command,
table_owner,
table_name,
gets,
rows_processed,
disk_reads
from
(select
decode (a.command_type ,
2, 'insert ' ,
3,'select ',
6, 'update ' ,
7, 'delete ' ,
26,'table lock ') command ,
c.owner table_owner,
c.name table_name ,
sum(a.disk_reads) disk_reads ,
sum(0 - a.executions) executions ,
sum(a.buffer_gets) gets ,
sum(a.rows_processed) rows_processed
from
sys.v_$sql a ,
sys.v_$object_dependency b ,
sys.v_$db_object_cache c
where
a.command_type in (2,3,6,7,26)and
b.from_address = a.address and
b.to_owner = c.owner and
b.to_name= c.name and
c.type = 'table' and
c.owner not in ('SYS','SYSTEM')
group by
a.command_type , c.owner , c.name ) )
where
rownum <= 100;
-- largescan9i.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
table_owner,
table_name,
table_type,
size_kb,
statement_count,
reference_count,
executions,
executions * reference_count total_scans
from
(select
a.object_owner table_owner,
a.object_name table_name,
b.segment_type table_type,
b.bytes / 1024 size_kb,
sum(c.executions ) executions,
count( distinct a.hash_value ) statement_count,
count( * ) reference_count
from
sys.v_$sql_plan a,
sys.dba_segments b,
sys.v_$sql c
where
a.object_owner (+) = b.owner
and
a.object_name (+) = b.segment_name
and
b.segment_type IN ('TABLE', 'TABLE PARTITION')
and
a.operation LIKE '%TABLE%'
and
a.options = 'FULL'
and
a.hash_value = c.hash_value
and
b.bytes / 1024 > 1024
group by
a.object_owner,
a.object_name,
a.operation,
b.bytes / 1024,
b.segment_type
order by
4 desc, 1, 2 );
-- system_waits.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select event,
total_waits,
round(100 * (total_waits / sum_waits),2) pct_waits,
time_wait_sec,
round(100 * (time_wait_sec / greatest(sum_time_waited,1)),2)
pct_time_waited,
total_timeouts,
round(100 * (total_timeouts / greatest(sum_timeouts,1)),2)
pct_timeouts,
average_wait_sec
from
(select event,
total_waits,
round((time_waited / 100),2) time_wait_sec,
total_timeouts,
round((average_wait / 100),2) average_wait_sec
from sys.v_$system_event
where event not in
('lock element cleanup',
'pmon timer',
'rdbms ipc message',
'rdbms ipc reply',
'smon timer',
'SQL*Net message from client',
'SQL*Net break/reset to client',
'SQL*Net message to client',
'SQL*Net more data from client',
'dispatcher timer',
'Null event',
'parallel query dequeue wait',
'parallel query idle wait - Slaves',
'pipe get',
'PL/SQL lock timer',
'slave wait',
'virtual circuit status',
'WMON goes to sleep',
'jobq slave wait',
'Queue Monitor Wait',
'wakeup time manager',
'PX Idle Wait') AND
event not like 'DFS%' AND
event not like 'KXFX%'),
(select sum(total_waits) sum_waits,
sum(total_timeouts) sum_timeouts,
sum(round((time_waited / 100),2)) sum_time_waited
from sys.v_$system_event
where event not in
('lock element cleanup',
'pmon timer',
'rdbms ipc message',
'rdbms ipc reply',
'smon timer',
'SQL*Net message from client',
'SQL*Net break/reset to client',
'SQL*Net message to client',
'SQL*Net more data from client',
'dispatcher timer',
'Null event',
'parallel query dequeue wait',
'parallel query idle wait - Slaves',
'pipe get',
'PL/SQL lock timer',
'slave wait',
'virtual circuit status',
'WMON goes to sleep',
'jobq slave wait',
'Queue Monitor Wait',
'wakeup time manager',
'PX Idle Wait') AND
event not like 'DFS%' AND
event not like 'KXFX%')
order by 4 desc, 1 asc;
-- physpctio.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
sid,
username,
round(100 * total_user_io/total_io,2) tot_io_pct
from
(select
b.sid sid,
nvl(b.username,p.name) username,
sum(value) total_user_io
from
sys.v_$statname c,
sys.v_$sesstat a,
sys.v_$session b,
sys.v_$bgprocess p
where
a.statistic#=c.statistic# and
p.paddr (+) = b.paddr and
b.sid=a.sid and
c.name in ('physical reads',
'physical writes',
'physical writes direct',
'physical reads direct',
'physical writes direct (lob)',
'physical reads direct (lob)')
group by
b.sid, nvl(b.username,p.name)),
(select
sum(value) total_io
from
sys.v_$statname c,
sys.v_$sesstat a
where
a.statistic#=c.statistic# and
c.name in ('physical reads',
'physical writes',
'physical writes direct',
'physical reads direct',
'physical writes direct (lob)',
'physical reads direct (lob)'))
order by
3 desc;
-- totpctio.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
SELECT
SID,
USERNAME,
ROUND(100 * TOTAL_USER_IO/TOTAL_IO,2) TOT_IO_PCT
FROM
(SELECT
b.SID SID,
nvl(b.USERNAME,p.NAME) USERNAME,
SUM(VALUE) TOTAL_USER_IO
FROM
sys.V_$STATNAME c,
sys.V_$SESSTAT a,
sys.V_$SESSION b,
sys.v_$bgprocess p
WHERE
a.STATISTIC#=c.STATISTIC# and
p.paddr (+) = b.paddr and
b.SID=a.SID and
c.NAME in ('physical reads','physical writes',
'consistent changes','consistent gets',
'db block gets','db block changes',
'physical writes direct',
'physical reads direct',
'physical writes direct (lob)',
'physical reads direct (lob)')
GROUP BY
b.SID, nvl(b.USERNAME,p.name)),
(select
sum(value) TOTAL_IO
from
sys.V_$STATNAME c,
sys.V_$SESSTAT a
WHERE
a.STATISTIC#=c.STATISTIC# and
c.NAME in ('physical reads','physical writes',
'consistent changes',
'consistent gets','db block gets',
'db block changes',
'physical writes direct',
'physical reads direct',
'physical writes direct (lob)',
'physical reads direct (lob)'))
ORDER BY
3 DESC;
-- topiousers.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
b.sid sid,
decode (b.username,null,e.name,b.username)
user_name,
d.spid os_id,
b.machine machine_name,
to_char(logon_time,'mm/dd/yy hh:mi:ss pm')
logon_time,
(sum(decode(c.name,'physical reads',value,0))
+
sum(decode(c.name,'physical writes',value,0))
+
sum(decode(c.name,
'physical writes direct',value,0)) +
sum(decode(c.name,
'physical writes direct (lob)',value,0)) +
sum(decode(c.name,
'physical reads direct (lob)',value,0)) +
sum(decode(c.name,
'physical reads direct',value,0)))
total_physical_io,
(sum(decode(c.name,'db block gets',value,0))
+
sum(decode(c.name,
'db block changes',value,0)) +
sum(decode(c.name,'consistent changes',value,0)) +
sum(decode(c.name,'consistent gets',value,0)) )
total_logical_io,
100 100 *(round ((sum (decode
(c.name, 'physical reads', value, 0))
sum (decode (c.name,
'physical reads direct', value, 0))) /
(sum (decode (c.name, 'db block gets',
value, 1)) +
sum (decode (c.name, 'consistent gets',
value, 0))),3)) hit_ratio,
sum(decode(c.name,'sorts (disk)',value,0))
disk_sorts,
sum(decode(c.name,'sorts (memory)',value,0))
memory_sorts,
sum(decode(c.name,'sorts (rows)',value,0))
rows_sorted,
sum(decode(c.name,'user commits',value,0))
commits,
sum(decode(c.name,'user rollbacks',value,0))
rollbacks,
sum(decode(c.name,'execute count',value,0))
executions,
sum(decode(c.name,'physical reads',value,0))
physical_reads,
sum(decode(c.name,'db block gets',value,0))
db_block_gets,
sum(decode(c.name,'consistent gets',value,0))
consistent_gets,
sum(decode(c.name,'consistent changes',value,0))
consistent_changes
from
sys.v_$sesstat a,
sys.v_$session b,
sys.v_$statname c,
sys.v_$process d,
sys.v_$bgprocess e
where
a.statistic#=c.statistic#
and
b.sid=a.sid
and
d.addr = b.paddr
and
e.paddr (+) = b.paddr
and
c.name in
('physical reads',
'physical writes',
'physical writes direct',
'physical reads direct',
'physical writes direct (lob)',
'physical reads direct (lob)',
'db block gets',
'db block changes',
'consistent changes',
'consistent gets',
'sorts (disk)',
'sorts (memory)',
'sorts (rows)',
'user commits',
'user rollbacks',
'execute count'
)
group by
b.sid,
d.spid,
decode (b.username,null,e.name,b.username),
b.machine,
to_char(logon_time,'mm/dd/yy hh:mi:ss pm')
order by
6 desc;
-- syswaits.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
event,
total_waits,
round(100 * (total_waits / sum_waits),2) pct_tot_waits,
time_wait_sec,
round(100 * (time_wait_sec / sum_secs),2) pct_secs_waits,
total_timeouts,
avg_wait_sec
from
(select
event,
total_waits,
round((time_waited / 100),2) time_wait_sec,
total_timeouts,
round((average_wait / 100),2) avg_wait_sec
from
sys.v_$system_event
where
event not in
('lock element cleanup ',
'pmon timer ',
'rdbms ipc message ',
'smon timer ',
'SQL*Net message from client ',
'SQL*Net break/reset to client ',
'SQL*Net message to client ',
'SQL*Net more data to client ',
'dispatcher timer ',
'Null event ',
'parallel query dequeue wait ',
'parallel query idle wait - Slaves ',
'pipe get ',
'PL/SQL lock timer ',
'slave wait ',
'virtual circuit status ',
'WMON goes to sleep') and
event not like 'DFS%' and
event not like 'KXFX%'),
(select
sum(total_waits) sum_waits,
sum(round((time_waited / 100),2)) sum_secs
from
sys.v_$system_event
where
event not in
('lock element cleanup ',
'pmon timer ',
'rdbms ipc message ',
'smon timer ',
'SQL*Net message from client ',
'SQL*Net break/reset to client ',
'SQL*Net message to client ',
'SQL*Net more data to client ',
'dispatcher timer ',
'Null event ',
'parallel query dequeue wait ',
'parallel query idle wait - Slaves ',
'pipe get ',
'PL/SQL lock timer ',
'slave wait ',
'virtual circuit status ',
'WMON goes to sleep') and
event not like 'DFS%' and
event not like 'KXFX%')
order by
2 desc;
-- sum_read_waits.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
a.average_wait c1,
b.average_wait c2,
a.total_waits /(a.total_waits + b.total_waits) c3,
b.total_waits /(a.total_waits + b.total_waits) c4,
(b.average_wait / a.average_wait)*100 c5
from
v$system_event a,
v$system_event b
where
a.event = 'db file scattered read'
and
b.event = 'db file sequential read'
;
? phys_reads.sql
-- hot_write_files.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
prompt
prompt This will identify any single file who's write I/O
prompt is more than 25% of the total write I/O of the database.
prompt
set pages 999
break on snap_time skip 2
col filename format a40
col phywrts format 999,999,999
col snap_time format a20
select
to_char(begin_interval_time,'yyyy-mm-dd hh24:mi') snap_time,
filename,
phywrts
from
dba_hist_filestatxs
natural join
dba_hist_snapshot
where
phywrts > 0
and
phywrts * 4 >
(
select
avg(value) all_phys_writes
from
dba_hist_sysstat
natural join
dba_hist_snapshot
where
stat_name = 'physical writes'
and
value > 0
)
order by
to_char(begin_interval_time,'yyyy-mm-dd hh24:mi'),
phywrts desc
;
-- snapfileio_10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
rem
rem NAME: snapfileio.sql
rem FUNCTION: Reports on the file io status of all of the
rem FUNCTION: datafiles in the database for a single snapshot.
-- snapdeltafileio_awr.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
rem
rem NAME: snapdeltafileio.sql
rem
rem FUNCTION: Reports on the file io status of all of
rem FUNCTION: the datafiles in the database across
rem FUNCTION: two snapshots.
rem HISTORY:
rem WHO WHAT WHEN
rem Mike Ault Created 11/19/03
rem
column sum_io1 new_value st1 noprint
column sum_io2 new_value st2 noprint
column sum_io new_value divide_by noprint
column Percent format 999.999 heading 'Percent|Of IO'
column brratio format 999.99 heading 'Block|Read|Ratio'
column bwratio format 999.99 heading 'Block|Write|Ratio'
column phyrds heading 'Physical | Reads'
column phywrts heading 'Physical | Writes'
column phyblkrd heading 'Physical|Block|Reads'
column phyblkwrt heading 'Physical|Block|Writes'
column filename format a45 heading 'File|Name'
column file# format 9999 heading 'File'
set feedback off verify off lines 132 pages 60 sqlbl on trims on
select
nvl(sum((b.phyrds-a.phyrds)+(b.phywrts-a.phywrts)),0) sum_io1
from
dba_hist_filestatxs a, dba_hist_filestatxs b
where
a.snap_id=&&first_snap_id and b.snap_id=&&sec_snap_id
and a.filename=b.filename;
select
nvl(sum((b.phyrds-a.phyrds)+(b.phywrts-a.phywrts)),0) sum_io2
from
dba_hist_tempstatxs a, dba_hist_tempstatxs b
where
a.snap_id=&&first_snap_id and b.snap_id=&&sec_snap_id
and a.filename=b.filename;
select &st1+&st2 sum_io from dual;
rem
@title132 'Snap &&first_snap_id to &&sec_snap_id File I/O Statistics Report'
spool rep_out\&db\fileio'&&first_snap_id'_to_'&&sec_snap_id'
select
a.filename, b.phyrds -a.phyrds phyrds, b.phywrts-a.phywrts phywrts,
(100*((b.phyrds-a.phyrds)+(b.phywrts-a.phywrts))/÷_by) Percent,
b.phyblkrd- a.phyblkrd phyblkrd, b.phyblkwrt-a.phyblkwrt phyblgwrt,
((b.phyblkrd-a.phyblkrd)/greatest((b.phyrds-a.phyrds),1)) brratio,
((b.phyblkwrt-a.phyblkwrt)/greatest((b.phywrts-a.phywrts),1)) bwratio
from
dba_hist_filestatxs a, dba_hist_filestatxs b
where
a.snap_id=&&first_snap_id and b.snap_id=&&sec_snap_id
and a.filename=b.filename
union
select
c.filename, d.phyrds-c.phyrds phyrds, d.phywrts-c.phywrts phywrts,
(100*((d.phyrds-c.phyrds)+(d.phywrts-c.phywrts))/÷_by) Percent,
d.phyblkrd-c.phyblkrd phyblkrd, d.phyblkwrt-c.phyblkwrt phyblgwrt,
((d.phyblkrd-c.phyblkrd)/greatest((d.phyrds-c.phyrds),1)) brratio,
((d.phyblkwrt-c.phyblkwrt)/greatest((d.phywrts-c.phywrts),1)) bwratio
from
dba_hist_tempstatxs c, dba_hist_tempstatxs d
where
c.snap_id=&&first_snap_id and d.snap_id=&&sec_snap_id
and c.filename=d.filename
order by
1
/
spool off
pause Press enter to continue
set feedback on verify on lines 80 pages 22
clear columns
ttitle off
undef first_snap_id
undef sec_snap_id
-- rpt_10g_sysstat_dy.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
prompt Copyright 2004 by Donald K. Burleson
prompt
prompt
prompt This will query the dba_hist_sysstat view to
prompt display average values by hour of the day
prompt
set pages 999
break on snap_time skip 2
accept stat_name char prompt 'Enter Statistics Name: ';
-- ash_obj_waits.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
obj.object_name,
obj.object_type,
ash.event,
sum(ash.wait_time + ash.time_waited) wait_time
from
v$active_session_history ash,
dba_objects obj
where
ash.sample_time > sysdate -1
and
ash.current_obj# = obj.object_id
group by
obj.object_name,
obj.object_type,
ash.event
order by 4 desc;
-- rpt_bhr_all.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
column bhr format 9.99
column mydate heading 'yr. mo dy Hr.'
select
to_char(snap_time,'yyyy-mm-dd HH24') mydate,
new.name buffer_pool_name,
(((new.consistent_gets-old.consistent_gets)+
(new.db_block_gets-old.db_block_gets))-
(new.physical_reads-old.physical_reads))
/
((new.consistent_gets-old.consistent_gets)+
(new.db_block_gets-old.db_block_gets)) bhr
from
dba_hist_buffer_pool_stat old,
dba_hist_buffer_pool_statnew,
dba_hist_sgasn
where
(((new.consistent_gets-old.consistent_gets)+
(new.db_block_gets-old.db_block_gets))-
(new.physical_reads-old.physical_reads))
/
((new.consistent_gets-old.consistent_gets)+
(new.db_block_gets-old.db_block_gets)) < .90
and
new.name = old.name
and
new.snap_id = sn.snap_id
and
old.snap_id = sn.snap_id-1
;
-- rpt_bhr_oracle8.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- rpt_bhr_all_awr.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- rpt_bhr_awr_dy.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- rpt_lib_cache_hr.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- buf_blocks.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
set pages 999
set lines 92
ttitle 'Contents of Data Buffers'
drop table t1;
create table t1 as
select
o.owner owner,
o.object_name object_name,
o.subobject_name subobject_name,
o.object_type object_type,
count(distinct file# || block#) num_blocks
from
dba_objects o,
v$bh bh
where
o.data_object_id = bh.objd
and
o.owner not in ('SYS','SYSTEM')
and
bh.status != 'free'
group by
o.owner,
o.object_name,
o.subobject_name,
o.object_type
order by
count(distinct file# || block#) desc
;
column c0 heading "Owner" format a12
column c1 heading "Object|Name" format a30
column c2 heading "Object|Type" format a8
column c3 heading "Number of|Blocks in|Buffer|Cache" format 99,999,999
column c4 heading "Percentage|of object|blocks in|Buffer" format 999
column c5 heading "Buffer|Pool" format a7
column c6 heading "Block|Size" format 99,999
select
t1.owner c0,
object_name c1,
case when object_type = 'TABLE PARTITION' then 'TAB PART'
when object_type = 'INDEX PARTITION' then 'IDX PART'
else object_type end c2,
sum(num_blocks) c3,
(sum(num_blocks)/greatest(sum(blocks), .001))*100 c4,
buffer_pool c5,
sum(bytes)/sum(blocks) c6
from
t1,
dba_segments s
where
s.segment_name = t1.object_name
and
s.owner = t1.owner
and
s.segment_type = t1.object_type
and
nvl(s.partition_name,'-') = nvl(t1.subobject_name,'-')
group by
t1.owner,
object_name,
object_type,
buffer_pool
having
sum(num_blocks) > 10
order by
sum(num_blocks) desc
;
-- all_vbh_status.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
set pages 50
@title80 'All Buffers Status'
spool rep_out\&&db\all_vbh_status
select
'32k '||status as status,
count(*) as num
from
v$bh
where file# in(
select file_id
from dba_data_files
where tablespace_name in (
select tablespace_name
from dba_tablespaces
where block_size=32768))
group by '32k '||status
union
select
'16k '||status as status,
count(*) as num
from
v$bh
where
file# in(
select file_id
from dba_data_files
where tablespace_name in (
select tablespace_name
from dba_tablespaces
where block_size=16384))
group by '16k '||status
union
select
'8k '||status as status,
count(*) as num
from
v$bh
where
file# in(
select file_id
from dba_data_files
where tablespace_name in (
select tablespace_name
from dba_tablespaces
where block_size=8192))
group by '8k '||status
union
select
'4k '||status as status,
count(*) as num
from
v$bh
where
file# in(
select file_id
from dba_data_files
where tablespace_name in (
select tablespace_name
from dba_tablespaces
where block_size=4096))
group by '4k '||status
union
select
'2k '||status as status,
count(*) as num
from
v$bh
where
file# in(
select file_id
from dba_data_files
where tablespace_name in (
select tablespace_name
from dba_tablespaces
where block_size=2048))
group by '2k '||status
union
select
status,
count(*) as num
from
v$bh
where status='free'
group by status
order by 1
/
spool off
ttitle off
-- obj_xtab.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- Crosstab of object and statistic for an owner
-- by Mike Ault www.oracle-script.com
col "Object" format a20
set numwidth 12
set lines 132
set pages 50
@title132 'Object Wait Statistics'
spool rep_out\&&db\obj_stat_xtab
select * from
(
select
DECODE
(GROUPING(a.object_name), 1, 'All Objects', a.object_name)
AS "Object",
sum(case when
a.statistic_name = 'ITL waits'
then
a.value else null end) "ITL Waits",
sum(case when
a.statistic_name = 'buffer busy waits'
then
a.value else null end) "Buffer Busy Waits",
sum(case when
a.statistic_name = 'row lock waits'
then
a.value else null end) "Row Lock Waits",
sum(case when
a.statistic_name = 'physical reads'
then
a.value else null end) "Physical Reads",
sum(case when
a.statistic_name = 'logical reads'
then
a.value else null end) "Logical Reads"
from
v$segment_statistics a
where
a.owner like upper('&owner')
group by
rollup(a.object_name)) b
where (b."ITL Waits">0 or b."Buffer Busy Waits">0)
/
spool off
clear columns
ttitle off
-- avoid_high_invalidations.ksh
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
#!/bin/ksh
# First, we must set the environment . . . .
ORACLE_SID=$1
export ORACLE_SID
ORACLE_HOME=`cat /etc/oratab|grep ^$ORACLE_SID:|cut -f2 -d':'`
#ORACLE_HOME=`cat /var/opt/oracle/oratab|grep ^$ORACLE_SID:|cut -f2 -d':'`
export ORACLE_HOME
PATH=$ORACLE_HOME/bin:$PATH
export PATH
# *********************************************************
#
# This will reduce the size of the data buffer
# immediately preceding a large truncate or data purge
#
# *********************************************************
$ORACLE_HOME/bin/sqlplus s /nologin<<!
connect system/manager as sysdba;
alter system set db_cache_size=10m;
alter system flush buffer_cache;
exit
!
# *********************************************************
# Now we can invoke the specialty task.
# *********************************************************
nohup purge_job.ksh > /tmp/purge.lst 2>&1 &
$ORACLE_HOME/bin/sqlplus s /nologin<<!
connect system/manager as sysdba;
alter system set db_cache_size=1500m;
exit
!
-- buf_keep_pool.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
set pages 999
set lines 92
spool keep_syn.lst
drop table t1;
create table t1 as
select
o.owner owner,
o.object_name object_name,
o.subobject_name subobject_name,
o.object_type object_type,
count(distinct file# || block#) num_blocks
from
dba_objects o,
v$bh bh
where
o.data_object_id = bh.objd
and
o.owner not in ('SYS','SYSTEM')
and
bh.status != 'free'
group by
o.owner,
o.object_name,
o.subobject_name,
o.object_type
order by
count(distinct file# || block#) desc
;
select
'alter '||s.segment_type||' '||t1.owner||'.'||s.segment_name||' storage (buff
er_pool keep);'
from
t1,
dba_segments s
where
s.segment_name = t1.object_name
and
s.owner = t1.owner
and
s.segment_type = t1.object_type
and
nvl(s.partition_name,'-') = nvl(t1.subobject_name,'-')
and
buffer_pool <> 'KEEP'
and
object_type in ('TABLE','INDEX')
group by
s.segment_type,
t1.owner,
s.segment_name
having
(sum(num_blocks)/greatest(sum(blocks), .001))*100 > 80
;
spool off;
-- hot_buffers.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- get_keep_pool.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
'alter table '||p.owner||'.'||p.name||' storage (buffer_pool keep);'
from
dba_tables t,
dba_segments s,
dba_hist_sqlstat a,
(select distinct
pl.sql_id,
pl.object_owner owner,
pl.object_name name
from
dba_hist_sql_plan pl
where
pl.operation = 'TABLE ACCESS'
and
pl.options = 'FULL') p
where
a.sql_id = p.sql_id
and
t.owner = s.owner
and
t.table_name = s.segment_name
and
t.table_name = p.name
and
t.owner = p.owner
and
t.owner not in ('SYS','SYSTEM')
and
t.buffer_pool <> 'KEEP'
having
s.blocks < 50
group by
p.owner, p.name, t.num_rows, s.blocks
UNION
-- ***********************************************************
-- Next, get the index names
-- ***********************************************************
select
'alter index '||owner||'.'||index_name||' storage (buffer_pool keep);'
from
dba_indexes
where
owner||'.'||table_name in
(
select
p.owner||'.'||p.name
from
dba_tables t,
dba_segments s,
dba_hist_sqlstat a,
(select distinct
pl.sql_id,
pl.object_owner owner,
pl.object_name name
from
dba_hist_sql_plan pl
where
pl.operation = 'TABLE ACCESS'
and
pl.options = 'FULL') p
where
a.sql_id = p.sql_id
and
t.owner = s.owner
and
t.table_name = s.segment_name
and
t.table_name = p.name
and
t.owner = p.owner
and
t.owner not in ('SYS','SYSTEM')
and
t.buffer_pool <> 'KEEP'
having
s.blocks < 50
group by
p.owner, p.name, t.num_rows, s.blocks
)
-- keep_syn.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
set pages 999
set lines 92
spool keep_syn.lst
drop table t1;
create table t1 as
select
o.owner owner,
o.object_name object_name,
o.subobject_name subobject_name,
o.object_type object_type,
count(distinct file# || block#) num_blocks
from
dba_objects o,
v$bh bh
where
o.data_object_id = bh.objd
and
o.owner not in ('SYS','SYSTEM')
and
bh.status != 'free'
group by
o.owner,
o.object_name,
o.subobject_name,
o.object_type
order by
count(distinct file# || block#) desc
;
select
'alter '||s.segment_type||' '||t1.owner||'.'||s.segment_name||' storage (buff
er_pool keep);'
from
t1,
dba_segments s
where
s.segment_name = t1.object_name
and
s.owner = t1.owner
and
s.segment_type = t1.object_type
and
nvl(s.partition_name,'-') = nvl(t1.subobject_name,'-')
and
buffer_pool <> 'KEEP'
and
object_type in ('TABLE','INDEX')
group by
s.segment_type,
t1.owner,
s.segment_name
having
(sum(num_blocks)/greatest(sum(blocks), .001))*100 > 80
;
-- 9i_recycle_syntax.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
set pages 999;
set heading off;
set feedback off;
ttitle off;
spool keep_syntax.sql
-- ***********************************************************
-- First, get the table list
-- ***********************************************************
select
'alter table '||p.owner||'.'||p.name||' storage (buffer_pool recycle);'
from
dba_tables t,
dba_segments s,
v$sqlarea a,
(select distinct
address,
object_owner owner,
object_name name
from
v$sql_plan
where
operation = 'TABLE ACCESS'
and
options = 'FULL') p
where
a.address = p.address
and
t.owner = s.owner
and
t.table_name = s.segment_name
and
t.table_name = p.name
and
t.owner = p.owner
and
t.owner not in ('SYS','SYSTEM')
and
t.buffer_pool <> 'RECYCLE'
having
s.blocks > 10000
group by
p.owner, p.name, t.num_rows, s.blocks
UNION
-- ***********************************************************
-- Next, get the index names
-- ***********************************************************
select
'alter index '||owner||'.'||index_name||' storage (buffer_pool recycle);'
from
dba_indexes
where
owner||'.'||table_name in
(
select
p.owner||'.'||p.name
from
dba_tables t,
dba_segments s,
v$sqlarea a,
(select distinct
address,
object_owner owner,
object_name name
from
v$sql_plan
where
operation = 'TABLE ACCESS'
and
options = 'FULL') p
where
a.address = p.address
and
t.owner = s.owner
and
t.table_name = s.segment_name
and
t.table_name = p.name
and
t.owner = p.owner
and
t.owner not in ('SYS','SYSTEM')
and
t.buffer_pool <> 'RECYCLE'
having
s.blocks > 10000
group by
p.owner, p.name, t.num_rows, s.blocks
)
;
spool off;
-- hot_recycle_blocks.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- optimizer_index_cost_adj.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
col c1 heading 'Average Waits for|Full Scan Read I/O' format 9999.999
col c2 heading 'Average Waits for|Index Read I/O' format 9999.999
col c3 heading 'Percent of| I/O Waits|for Full Scans' format 9.99
col c4 heading 'Percent of| I/O Waits|for Index Scans' format 9.99
col c5 heading 'Starting|Value|for|optimizer|index|cost|adj' format 999
select
a.average_wait c1,
b.average_wait c2,
a.total_waits /(a.total_waits + b.total_waits) c3,
b.total_waits /(a.total_waits + b.total_waits) c4,
(b.average_wait / a.average_wait)*100 c5
from
v$system_event a,
v$system_event b
where
a.event = 'db file scattered read'
and
b.event = 'db file sequential read'
;
);
end;
/
select
stuff
from
customer
natural join
orders
natural join
item
natural join
product
where
credit_rating * extended_credit > .07
and
(qty_in_stock * velocity) /.075 < 30
or
(sku_price / 47) * (qty_in_stock / velocity) > 47;
and
course = anthropology 610 ;
customer_state = New Mexico ;
-- plan9i.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
set echo off;
set feedback on
set pages 999;
column nbr_FTS format 999,999
column num_rows format 999,999,999
column blocks format 999,999
column owner format a14;
column name format a24;
column ch format a1;
column object_owner heading "Owner" format a12;
column ct heading "# of SQL selects" format 999,999;
select
object_owner,
count(*) ct
from
v$sql_plan
where
object_owner is not null
group by
object_owner
order by
ct desc
;
--spool access.lst;
set heading off;
set feedback off;
set heading on;
set feedback on;
ttitle 'full table scans and counts| |The "K" indicates that the table is in th
e KEEP Pool (Oracle8).'
select
p.owner,
p.name,
t.num_rows,
-- ltrim(t.cache) ch,
decode(t.buffer_pool,'KEEP','Y','DEFAULT','N') K,
s.blocks blocks,
sum(a.executions) nbr_FTS
from
dba_tables t,
dba_segments s,
v$sqlarea a,
(select distinct
address,
object_owner owner,
object_name name
from
v$sql_plan
where
operation = 'TABLE ACCESS'
and
options = 'FULL') p
where
a.address = p.address
and
t.owner = s.owner
and
t.table_name = s.segment_name
and
t.table_name = p.name
and
t.owner = p.owner
and
t.owner not in ('SYS','SYSTEM')
having
sum(a.executions) > 9
group by
p.owner, p.name, t.num_rows, t.cache, t.buffer_pool, s.blocks
order by
sum(a.executions) desc;
column nbr_RID format 999,999,999
column num_rows format 999,999,999
column owner format a15;
column name format a25;
ttitle 'Table access by ROWID and counts'
select
p.owner,
p.name,
t.num_rows,
sum(s.executions) nbr_RID
from
dba_tables t,
v$sqlarea s,
(select distinct
address,
object_owner owner,
object_name name
from
v$sql_plan
where
operation = 'TABLE ACCESS'
and
options = 'BY ROWID') p
where
s.address = p.address
and
t.table_name = p.name
and
t.owner = p.owner
having
sum(s.executions) > 9
group by
p.owner, p.name, t.num_rows
order by
sum(s.executions) desc;
--*************************************************
-- Index Report Section
--*************************************************
column nbr_scans format 999,999,999
column num_rows format 999,999,999
column tbl_blocks format 999,999,999
column owner format a9;
column table_name format a20;
column index_name format a20;
ttitle 'Index full scans and counts'
select
p.owner,
d.table_name,
p.name index_name,
seg.blocks tbl_blocks,
sum(s.executions) nbr_scans
from
dba_segments seg,
v$sqlarea s,
dba_indexes d,
(select distinct
address,
object_owner owner,
object_name name
from
v$sql_plan
where
operation = 'INDEX'
and
options = 'FULL SCAN') p
where
d.index_name = p.name
and
s.address = p.address
and
d.table_name = seg.segment_name
and
seg.owner = p.owner
having
sum(s.executions) > 9
group by
p.owner, d.table_name, p.name, seg.blocks
order by
sum(s.executions) desc;
-- plan10g.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
spool plan.lst
set echo off
set feedback on
set pages 999;
column nbr_FTS format 99,999
column num_rows format 999,999
column blocks format 9,999
column owner format a10;
column name format a30;
column ch format a1;
column time heading "Snapshot Time" format a15
column object_owner heading "Owner" format a12;
column ct heading "# of SQL selects" format 999,999;
break on time
select
object_owner,
count(*) ct
from
dba_hist_sql_plan
where
object_owner is not null
group by
object_owner
order by
ct desc
;
--spool access.lst;
set heading on;
set feedback on;
ttitle 'full table scans and counts| |The "K" indicates that the table is in th
e KEEP Pool (Oracle8).'
select
to_char(sn.end_interval_time,'mm/dd/rr hh24') time,
p.owner,
p.name,
t.num_rows,
-- ltrim(t.cache) ch,
decode(t.buffer_pool,'KEEP','Y','DEFAULT','N') K,
s.blocks blocks,
sum(a.executions_delta) nbr_FTS
from
dba_tables t,
dba_segments s,
dba_hist_sqlstat a,
dba_hist_snapshot sn,
(select distinct
pl.sql_id,
object_owner owner,
object_name name
from
dba_hist_sql_plan pl
where
operation = 'TABLE ACCESS'
and
options = 'FULL') p
where
a.snap_id = sn.snap_id
and
a.sql_id = p.sql_id
and
t.owner = s.owner
and
t.table_name = s.segment_name
and
t.table_name = p.name
and
t.owner = p.owner
and
t.owner not in ('SYS','SYSTEM')
having
sum(a.executions_delta) > 1
group by
to_char(sn.end_interval_time,'mm/dd/rr hh24'),p.owner, p.name, t.num_rows, t.
cache, t.buffer_pool, s.blocks
order by
1 asc;
-- top_20_sessions.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select * from
(select b.sid sid,
decode (b.username,null,e.name,b.username) user_name,
d.spid os_id,
b.machine machine_name,
to_char(logon_time,'dd-mon-yy hh:mi:ss pm') logon_time,
(sum(decode(c.name,'physical reads',value,0)) +
sum(decode(c.name,'physical writes',value,0)) +
sum(decode(c.name,'physical writes direct',value,0)) +
sum(decode(c.name,'physical writes direct (lob)',value,0))+
sum(decode(c.name,'physical reads direct (lob)',value,0)) +
sum(decode(c.name,'physical reads direct',value,0)))
total_physical_io,
(sum(decode(c.name,'db block gets',value,0)) +
sum(decode(c.name,'db block changes',value,0)) +
sum(decode(c.name,'consistent changes',value,0)) +
sum(decode(c.name,'consistent gets',value,0)) )
total_logical_io,
(sum(decode(c.name,'session pga memory',value,0))+
sum(decode(c.name,'session uga memory',value,0)) )
total_memory_usage,
sum(decode(c.name,'parse count (total)',value,0)) parses,
sum(decode(c.name,'cpu used by this session',value,0))
total_cpu,
sum(decode(c.name,'parse time cpu',value,0)) parse_cpu,
sum(decode(c.name,'recursive cpu usage',value,0))
recursive_cpu,
sum(decode(c.name,'cpu used by this session',value,0)) -
sum(decode(c.name,'parse time cpu',value,0)) -
sum(decode(c.name,'recursive cpu usage',value,0))
other_cpu,
sum(decode(c.name,'sorts (disk)',value,0)) disk_sorts,
sum(decode(c.name,'sorts (memory)',value,0)) memory_sorts,
sum(decode(c.name,'sorts (rows)',value,0)) rows_sorted,
sum(decode(c.name,'user commits',value,0)) commits,
sum(decode(c.name,'user rollbacks',value,0)) rollbacks,
sum(decode(c.name,'execute count',value,0)) executions
from sys.v_$sesstat a,
sys.v_$session b,
sys.v_$statname c,
sys.v_$process d,
sys.v_$bgprocess e
where a.statistic#=c.statistic# and
b.sid=a.sid and
d.addr = b.paddr and
e.paddr (+) = b.paddr and
c.NAME in ('physical reads',
'physical writes',
'physical writes direct',
'physical reads direct',
'physical writes direct (lob)',
'physical reads direct (lob)',
'db block gets',
'db block changes',
'consistent changes',
'consistent gets',
'session pga memory',
'session uga memory',
'parse count (total)',
'CPU used by this session',
'parse time cpu',
'recursive cpu usage',
'sorts (disk)',
'sorts (memory)',
'sorts (rows)',
'user commits',
'user rollbacks',
'execute count'
)
group by b.sid,
d.spid,
decode (b.username,null,e.name,b.username),
b.machine,
to_char(logon_time,'dd-mon-yy hh:mi:ss pm')
order by 6 desc)
where rownum < 21
? awr_high_scan_sql.sql
select
c.username username,
count(a.hash_value) scan_count
from
sys.v_$sql_plan a,
sys.dba_segments b,
sys.dba_users c,
sys.v_$sql d
where
a.object_owner (+) = b.owner
and
a.object_name (+) = b.segment_name
and
b.segment_type IN ('TABLE', 'TABLE PARTITION')
and
a.operation like '%TABLE%'
and
a.options = 'FULL'
and
c.user_id = d.parsing_user_id
and
d.hash_value = a.hash_value
and
b.bytes / 1024 > 1024
group by
c.username
order by
2 desc
;
-- awr_high_resource_sql.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select sql_text,
username,
disk_reads_per_exec,
buffer_gets,
disk_reads,
parse_calls,
sorts,
executions,
rows_processed,
hit_ratio,
first_load_time,
sharable_mem,
persistent_mem,
runtime_mem,
cpu_time,
elapsed_time,
address,
hash_value
from
(select sql_text ,
b.username ,
round((a.disk_reads/decode(a.executions,0,1,
a.executions)),2)
disk_reads_per_exec,
a.disk_reads ,
a.buffer_gets ,
a.parse_calls ,
a.sorts ,
a.executions ,
a.rows_processed ,
100 - round(100 *
a.disk_reads/greatest(a.buffer_gets,1),2) hit_ratio,
a.first_load_time ,
sharable_mem ,
persistent_mem ,
runtime_mem,
cpu_time,
elapsed_time,
address,
hash_value
from
sys.v_$sqlarea a,
sys.all_users b
where
a.parsing_user_id=b.user_id and
b.username not in ('sys','system')
order by 3 desc)
where rownum < 21
-- awr_cartesian_sum.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
count(distinct hash_value) carteisan_statements,
count(*) total_cartesian_joins
from
sys.v_$sql_plan
where
options = 'CARTESIAN'
and
operation like '%JOIN%'
-- awr_sql_cartesian.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select *
from
sys.v_$sql
where
hash_value in
(select hash_value
from
sys.v_$sql_plan
where
options = 'CARTESIAN'
and
operation LIKE '%JOIN%' )
order by hash_value;
-- awr_large_scan_count.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
sql_text,
total_large_scans,
executions,
executions * total_large_scans sum_large_scans
from
(select
sql_text,
count(*) total_large_scans,
executions
from
sys.v_$sql_plan a,
sys.dba_segments b,
sys.v_$sql c
where
a.object_owner (+) = b.owner
and
a.object_name (+) = b.segment_name
and
b.segment_type IN ('TABLE', 'TABLE PARTITION')
and
a.operation LIKE '%TABLE%'
and
a.options = 'FULL'
and
c.hash_value = a.hash_value
and
b.bytes / 1024 > 1024
group by
sql_text, executions)
order by
4 desc
;
-- An invalid hint
select /*+ first_rows parallel(emp,8)*/
emp_name
from
emp
order by
ename;
-- A valid hint
select /*+ full parallel(emp,35)*/
emp_name
from
emp
order by
ename;
select
/*+ ordered use_hash (emp, dept) use_nl (sal, bon) */
from
emp,
dept,
sal,
bon
where . . .
-- awr_sqlstat_deltas.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
col c1 heading Begin|Interval|time format a8
col c2 heading SQL|ID format a13
col c3 heading Exec|Delta format 9,999
col c4 heading Buffer|Gets|Delta format 9,999
col c5 heading Disk|Reads|Delta format 9,999
col c6 heading IO Wait|Delta format 9,999
col c7 heading Application|Wait|Delta format 9,999
col c8 heading Concurrency|Wait|Delta format 9,999
break on c1
select
to_char(s.begin_interval_time, mm-dd hh24 ) c1,
sql.sql_id c2,
sql.executions_delta c3,
sql.buffer_gets_delta c4,
sql.disk_reads_delta c5,
sql.iowait_delta c6,
sql.apwait_delta c7,
sql.ccwait_delta c8
from
dba_hist_sqlstat sql,
dba_hist_snapshot s
where
s.snap_id = sql.snap_id
order by
c1,
c2
;
-- awr_sqlstat_deltas_detail.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
col c1 heading Begin|Interval|time format a8
col c2 heading Exec|Delta format 999,999
col c3 heading Buffer|Gets|Delta format 999,999
col c4 heading Disk|Reads|Delta format 9,999
col c5 heading IO Wait|Delta format 9,999
col c6 heading App|Wait|Delta format 9,999
col c7 heading Cncr|Wait|Delta format 9,999
col c8 heading CPU|Time|Delta format 999,999
col c9 heading Elpsd|Time|Delta format 999,999
accept sqlid prompt Enter SQL ID:
ttitle time series execution for|&sqlid
break on c1
select
to_char(s.begin_interval_time, mm-dd hh24 ) c1,
sql.executions_delta c2,
sql.buffer_gets_delta c3,
sql.disk_reads_delta c4,
sql.iowait_delta c5,
sql.apwait_delta c6,
sql.ccwait_delta c7,
sql.cpu_time_delta c8,
sql.elapsed_time_delta c9
from
dba_hist_sqlstat sql,
dba_hist_snapshot s
where
s.snap_id = sql.snap_id
and
sql_id = &sqlid
order by
c1
;
-- awr_high_cost_sql.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
col c1 heading SQL|ID format a13
col c2 heading Cost format 9,999,999
col c3 heading SQL Text format a200
select
p.sql_id c1,
p.cost c2,
to_char(s.sql_text) c3
from
dba_hist_sql_plan p,
dba_hist_sqltext s
where
p.id = 0
and
p.sql_id = s.sql_id
and
p.cost is not null
order by
p.cost desc
;
-- awr_sql_object_char.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
col c1 heading Owner format a13
col c2 heading Object|Type format a15
col c3 heading Object|Name format a25
col c4 heading Average|CPU|Cost format 9,999,999
col c5 heading Average|IO|Cost format 9,999,999
break on c1 skip 2
break on c2 skip 2
select
p.object_owner c1,
p.object_type c2,
p.object_name c3,
avg(p.cpu_cost) c4,
avg(p.io_cost) c5
from
dba_hist_sql_plan p
where
p.object_name is not null
and
p.object_owner <> 'SYS'
group by
p.object_owner,
p.object_type,
p.object_name
order by
1,2,4 desc
;
-- awr_sql_object_char_detail.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
accept tabname prompt Enter Table Name:
col c0 heading Begin|Interval|time format a8
col c1 heading Owner format a10
col c2 heading Object|Type format a10
col c3 heading Object|Name format a15
col c4 heading Average|CPU|Cost format 9,999,999
col c5 heading Average|IO|Cost format 9,999,999
break on c1 skip 2
break on c2 skip 2
select
to_char(sn.begin_interval_time,'mm-dd hh24') c0,
p.object_owner c1,
p.object_type c2,
p.object_name c3,
avg(p.cpu_cost) c4,
avg(p.io_cost) c5
from
dba_hist_sql_plan p,
dba_hist_sqlstat st,
dba_hist_snapshot sn
where
p.object_name is not null
and
p.object_owner <> 'SYS'
and
p.object_name = 'CUSTOMER_DETS'
and
p.sql_id = st.sql_id
and
st.snap_id = sn.snap_id
group by
to_char(sn.begin_interval_time,'mm-dd hh24'),
p.object_owner,
p.object_type,
p.object_name
order by
1,2,3 desc
;
-- awr_nested_join_alert.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
col c1 heading Date format a20
col c2 heading Nested|Loops|Count format 99,999,999
col c3 heading Rows|Processed format 99,999,999
col c4 heading Disk|Reads format 99,999,999
col c5 heading CPU|Time format 99,999,999
-- awr_sql_index.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
col c0 heading Begin|Interval|time format a8
col c1 heading Index|Name format a20
col c2 heading Disk|Reads format 99,999,999
col c3 heading Rows|Processed format 99,999,999
select
to_char(s.begin_interval_time,'mm-dd hh24') c0,
p.object_name c1,
sum(t.disk_reads_total) c2,
sum(t.rows_processed_total) c3
from
dba_hist_sql_plan p,
dba_hist_sqlstat t,
dba_hist_snapshot s
where
p.sql_id = t.sql_id
and
t.snap_id = s.snap_id
and
p.object_type like '%INDEX%'
group by
to_char(s.begin_interval_time,'mm-dd hh24'),
p.object_name
order by
c0,c1,c2 desc
;
-- awr_sql_index_access.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
col c1 heading Begin|Interval|Time format a20
col c2 heading Index|Range|Scans format 999,999
col c3 heading Index|Unique|Scans format 999,999
col c4 heading Index|Full|Scans format 999,999
select
r.c1 c1,
r.c2 c2,
u.c2 c3,
f.c2 c4
from
(
select
to_char(sn.begin_interval_time,'yy-mm-dd hh24') c1,
count(1) c2
from
dba_hist_sql_plan p,
dba_hist_sqlstat s,
dba_hist_snapshot sn
where
p.object_owner <> 'SYS'
and
p.operation like '%INDEX%'
and
p.options like '%RANGE%'
and
p.sql_id = s.sql_id
and
s.snap_id = sn.snap_id
group by
to_char(sn.begin_interval_time,'yy-mm-dd hh24')
order by
1 ) r,
(
select
to_char(sn.begin_interval_time,'yy-mm-dd hh24') c1,
count(1) c2
from
dba_hist_sql_plan p,
dba_hist_sqlstat s,
dba_hist_snapshot sn
where
p.object_owner <> 'SYS'
and
p.operation like '%INDEX%'
and
p.options like '%UNIQUE%'
and
p.sql_id = s.sql_id
and
s.snap_id = sn.snap_id
group by
to_char(sn.begin_interval_time,'yy-mm-dd hh24')
order by
1 ) u,
(
select
to_char(sn.begin_interval_time,'yy-mm-dd hh24') c1,
count(1) c2
from
dba_hist_sql_plan p,
dba_hist_sqlstat s,
dba_hist_snapshot sn
where
p.object_owner <> 'SYS'
and
p.operation like '%INDEX%'
and
p.options like '%FULL%'
and
p.sql_id = s.sql_id
and
s.snap_id = sn.snap_id
group by
to_char(sn.begin_interval_time,'yy-mm-dd hh24')
order by
1 ) f
where
r.c1 = u.c1
and
r.c1 = f.c1
;
-- awr_sql_object_avg_dy.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
col c1 heading Object|Name format a30
col c2 heading Week Day format a15
col c3 heading Invocation|Count format 99,999,999
break on c1 skip 2
break on c2 skip 2
select
decode(c2,1,'Monday',2,'Tuesday',3,'Wednesday',4,'Thursday',5,'Friday',6,'Satu
rday',7,'Sunday') c2,
c1,
c3
from
(
select
p.object_name c1,
to_char(sn.end_interval_time,'d') c2,
count(1) c3
from
dba_hist_sql_plan p,
dba_hist_sqlstat s,
dba_hist_snapshot sn
where
p.object_owner <> 'SYS'
and
p.sql_id = s.sql_id
and
s.snap_id = sn.snap_id
group by
p.object_name,
to_char(sn.end_interval_time,'d')
order by
c2,c1
)
;
-- awr_sql_details.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
accept sqlid prompt Please enter SQL ID:
col c1 heading Operation format a20
col c2 heading Options format a20
col c3 heading Object|Name format a25
col c4 heading Search Columns format 999,999
col c5 heading Cardinality format 999,999
select
operation c1,
options c2,
object_name c3,
search_columns c4,
cardinality c5
from
dba_hist_sql_plan p
where
p.sql_id = '&sqlid'
order by
p.id;
-- index_usage_hr.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
col c1 heading Begin|Interval|time format a20
col c2 heading Search Columns format 999
col c3 heading Invocation|Count format 99,999,999
break on c1 skip 2
accept idxname char prompt Enter Index Name:
ttitle Invocation Counts for index|&idxname
select
to_char(sn.begin_interval_time,'yy-mm-dd hh24') c1,
p.search_columns c2,
count(*) c3
from
dba_hist_snapshot sn,
dba_hist_sql_plan p,
dba_hist_sqlstat st
where
st.sql_id = p.sql_id
and
sn.snap_id = st.snap_id
and
p.object_name = &idxname'
group by
begin_interval_time,search_columns;
-- awr_access_counts.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- awr_sql_full_scans.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
col c1 heading Begin|Interval|Time format a20
col c2 heading Index|Table|Scans format 999,999
col c3 heading Full|Table|Scans format 999,999
select
i.c1 c1,
i.c2 c2,
f.c2 c3
from
(
select
to_char(sn.begin_interval_time,'yy-mm-dd hh24') c1,
count(1) c2
from
dba_hist_sql_plan p,
dba_hist_sqlstat s,
dba_hist_snapshot sn
where
p.object_owner <> 'SYS'
and
p.operation like '%TABLE ACCESS%'
and
p.options like '%INDEX%'
and
p.sql_id = s.sql_id
and
s.snap_id = sn.snap_id
group by
to_char(sn.begin_interval_time,'yy-mm-dd hh24')
order by
1 ) i,
(
select
to_char(sn.begin_interval_time,'yy-mm-dd hh24') c1,
count(1) c2
from
dba_hist_sql_plan p,
dba_hist_sqlstat s,
dba_hist_snapshot sn
where
p.object_owner <> 'SYS'
and
p.operation like '%TABLE ACCESS%'
and
p.options = 'FULL'
and
p.sql_id = s.sql_id
and
s.snap_id = sn.snap_id
group by
to_char(sn.begin_interval_time,'yy-mm-dd hh24')
order by
1 ) f
where
i.c1 = f.c1
;
-- awr_full_table_scans.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- awr_sql_access_hr.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- awr_sql_access_day.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- awr_sql_scan_sums.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
f.c1 c1,
f.c2 c2,
s.c2 c3,
i.c2 c4
from
(
select
to_char(sn.begin_interval_time,'yy-mm-dd hh24') c1,
count(1) c2
from
dba_hist_sql_plan p,
dba_hist_sqlstat s,
dba_hist_snapshot sn,
dba_segments o
where
p.object_owner <> 'SYS'
and
p.object_owner = o.owner
and
p.object_name = o.segment_name
and
o.blocks > 1000
and
p.operation like '%TABLE ACCESS%'
and
p.options like '%FULL%'
and
p.sql_id = s.sql_id
and
s.snap_id = sn.snap_id
group by
to_char(sn.begin_interval_time,'yy-mm-dd hh24')
order by
1 ) f,
(
select
to_char(sn.begin_interval_time,'yy-mm-dd hh24') c1,
count(1) c2
from
dba_hist_sql_plan p,
dba_hist_sqlstat s,
dba_hist_snapshot sn,
dba_segments o
where
p.object_owner <> 'SYS'
and
p.object_owner = o.owner
and
p.object_name = o.segment_name
and
o.blocks < 1000
and
p.operation like '%INDEX%'
and
p.sql_id = s.sql_id
and
s.snap_id = sn.snap_id
group by
to_char(sn.begin_interval_time,'yy-mm-dd hh24')
order by
1 ) s,
(
select
to_char(sn.begin_interval_time,'yy-mm-dd hh24') c1,
count(1) c2
from
dba_hist_sql_plan p,
dba_hist_sqlstat s,
dba_hist_snapshot sn
where
p.object_owner <> 'SYS'
and
p.operation like '%INDEX%'
and
p.sql_id = s.sql_id
and
s.snap_id = sn.snap_id
group by
to_char(sn.begin_interval_time,'yy-mm-dd hh24')
order by
1 ) i
where
f.c1 = s.c1
and
f.c1 = i.c1
;
-- awr_sql_full_scans_avg_dy.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- awr_hash_join_alert.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- ash_display_active_sql.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- ash_display_sql_io_waits.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
ash.sql_id,
count(*)
from
v$active_session_history ash,
v$event_name evt
where
ash.sample_time > sysdate 1/24/60
and
ash.session_state = WAITING
and
ash.event_id = evt.event_id
and
evt.wait_class = User I/O
group by
sql_id
order by
count(*) desc;
-- ash_event_rollup.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- count_sql_invocations.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
h.sql_id,
count(*)
from
dba_hist_active_sess_history h,
v$sql s
where
h.sql_id = s.sql_id
and
s.sql_fulltext like %orders%
having
count(*) > 1
group by
h.sql_id
order by
2 DESC;
-- wait_time_detail.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
-- ash_wait_time_by_day.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
TO_CHAR(h.sample_time,'Day') "Hour",
sum(h.wait_time/100) "Total Wait Time (Sec)"
from
v$active_session_history h,
v$event_name n
where
h.session_state = 'ON CPU'
and
h.session_type = 'FOREGROUND'
and
h.event_id = n.EVENT_ID
and
n.wait_class <> 'Idle'
group by
TO_CHAR(h.sample_time,'Day');
-- ash_total_event_wait_time.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
h.event "Wait Event",
SUM(h.wait_time/100) "Wait Time (Sec)"
from
v$active_session_history h,
v$event_name n
where
h.session_state = 'ON CPU'
and
h.session_type = 'FOREGROUND'
and
h.event_id = n.EVENT_ID
and
to_char(h.sample_time,'HH24') = '12'
and
n.wait_class <> 'Idle'
group by
h.event
order by
2 DESC;
-- ash_datafile_waits.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
f.file_name Data File ,
COUNT(*) Wait Number ,
SUM(h.time_waited) Total Time Waited
from
v$active_session_history h,
dba_data_files f
where
h.current_file# = f.file_id
group by
f.file_name
order by 3 DESC;
? ash_user_wait_time.sql
select
s.sid,
s.username,
sum(h.wait_time + h.time_waited) "total wait time"
from
v$active_session_history h,
v$session s,
v$event_name e
where
h.session_id = s.sid
and
e.event_id = h.event_id
and
e.wait_class <> 'Idle'
and
s.username IS NOT NULL
group by
s.sid, s.username
order by 3;
-- ash_object_wait_time.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
o.owner,
o.object_name,
o.object_type,
SUM(h.wait_time + h.time_waited) "total wait time"
from
v$active_session_history h,
dba_objects o,
v$event_name e
where
h.current_obj# = o.object_id
and
e.event_id = h.event_id
and
e.wait_class <> 'Idle'
group by
o.owner,
o.object_name,
o.object_type
order by 4 DESC;
-- awr_latch_waits_by_hour.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
break on begin_interval_time skip 1
column begin_interval_time format a25
column latch_name format a40
select
begin_interval_time,
latch_name,
gets,
misses,
sleeps
from
dba_hist_latch
natural join
dba_hist_snapshot
where
(misses + sleeps ) > 0
order by
begin_interval_time,
misses DESC,
sleeps DESC
;
-- awr_enqueue_waits.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
column begin_interval_time format a10
column req_reason format a25
column cum_wait_time head CUM|WAIT|TIME
column total_req# head TOTAL|REQ#
column total_wait# head TOTAL|WAIT#
column failed_req# head FAILED|REQ#
select
begin_interval_time,
eq_type,
req_reason,
total_req#,
total_wait#,
succ_req#,
failed_req#,
cum_wait_time
from
dba_hist_enqueue_stat
natural join
dba_hist_snapshot
where
cum_wait_time > 0
order by
begin_interval_time,
cum_wait_time;
-- awr_list_seg_block_space.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
drop type BlckFreeSpaceSet;
drop type BlckFreeSpace;
create type BlckFreeSpace as object
(
seg_owner varchar2(30),
seg_type varchar2(30),
seg_name varchar2(100),
fs1 number,
fs2 number,
fs3 number,
fs4 number,
fb number
);
create type BlckFreeSpaceSet as table of BlckFreeSpace;
create or replace function BlckFreeSpaceFunc (seg_owner IN varchar2, seg_type in
varchar2 default null) return BlckFreeSpaceSet
pipelined
is
outRec BlckFreeSpace := BlckFreeSpace(null,null,null,null,null,null,null,null
);
fs1_b number;
fs2_b number;
fs3_b number;
fs4_b number;
fs1_bl number;
fs2_bl number;
fs3_bl number;
fs4_bl number;
fulb number;
fulbl number;
u_b number;
u_bl number;
begin
for rec in (select s.owner,s.segment_name,s.segment_type from dba_segments s w
here owner = seg_owner and segment_type = nvl(seg_type,segment_type) )
loop
dbms_space.space_usage(
segment_owner => rec.owner,
segment_name => rec.segment_name,
segment_type => rec.segment_type,
fs1_bytes => fs1_b,
fs1_blocks => fs1_bl,
fs2_bytes => fs2_b,
fs2_blocks => fs2_bl,
fs3_bytes => fs3_b,
fs3_blocks => fs3_bl,
fs4_bytes => fs4_b,
fs4_blocks => fs4_bl,
full_bytes => fulb,
full_blocks => fulbl,
unformatted_blocks => u_bl,
unformatted_bytes => u_b
);
outRec.seg_owner := rec.owner;
outRec.seg_type := rec.segment_type;
outRec.seg_name := rec.segment_name;
outRec.fs1 := fs1_bl;
outRec.fs2 := fs2_bl;
outRec.fs3 := fs3_bl;
outRec.fs4 := fs4_bl;
outRec.fb := fulbl;
Pipe Row (outRec);
end loop;
return;
end;
/
-- free_space_by_segment.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
col seg_owner heading 'Segment|Owner' format a10
col seg_type heading 'Segment|Type' format a10
col seg_name heading 'Segment|Name' format a30
col fs1 heading '0-25%|Free Space' format 9,999
col fs2 heading '25-50%|Free Space' format 9,999
col fs3 heading '50-75%|Free Space' format 9,999
col fs4 heading '75-100%|Free Space' format 9,999
col fb heading 'Full|Blocks' format 9,999
accept user_name prompt Enter Segment Owner:
break on seg_owner
select
*
from
Table ( BlckFreeSpaceFunc ('&user_name', 'TABLE' ) )
order by
fs4 desc
;
-- block_count.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
DECLARE
v_unformatted_blocks number;
v_unformatted_bytes number;
v_fs1_blocks number;
v_fs1_bytes number;
v_fs2_blocks number;
v_fs2_bytes number;
v_fs3_blocks number;
v_fs3_bytes number;
v_fs4_blocks number;
v_fs4_bytes number;
v_full_blocks number;
v_full_bytes number;
BEGIN
dbms_space.space_usage ('SYSTEM', 'TEST', 'TABLE', v_unformatted_blocks, v_unfor
matted_bytes, v_fs1_blocks, v_fs1_bytes, v_fs2_blocks, v_fs2_bytes, v_fs3_blocks
, v_fs3_bytes, v_fs4_blocks, v_fs4_bytes, v_full_blocks, v_full_bytes);
dbms_output.put_line('Unformatted Blocks = '||v_unformatted_blocks);
dbms_output.put_line('FS1 Blocks = '||v_fs1_blocks);
dbms_output.put_line('FS2 Blocks = '||v_fs2_blocks);
dbms_output.put_line('FS3 Blocks = '||v_fs3_blocks);
dbms_output.put_line('FS4 Blocks = '||v_fs4_blocks);
dbms_output.put_line('Full Blocks = '||v_full_blocks);
end;
-- job_schedule.sql
-- Parameters:
-- 1) Specific USERNAME or ALL which doesn't limit output.
-- *****************************************************************
set verify off
select
owner,
schedule_name,
repeat_interval
from
dba_scheduler_schedules
where
owner = decode(upper('&1'), 'ALL', owner, upper('&1'))
;
- Parameters:
-- 1) Specific USERNAME or ALL which doesn't limit output.
;
-- display_full_table_scans.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
select
to_char(sn.end_interval_time,'mm/dd/rr hh24') time,
p.owner,
p.name,
t.num_rows,
decode(t.buffer_pool,'KEEP','Y','DEFAULT','N') K,
s.blocks blocks,
sum(a.executions_delta) nbr_FTS
from
dba_tables t,
dba_segments s,
dba_hist_sqlstat a,
dba_hist_snapshot sn,
(select distinct
pl.sql_id,
object_owner owner,
object_name name
from
dba_hist_sql_plan pl
where
operation = 'TABLE ACCESS'
and
options = 'FULL') p
where
a.snap_id = sn.snap_id
and
a.sql_id = p.sql_id
and
t.owner = s.owner
and
t.table_name = s.segment_name
and
t.table_name = p.name
and
t.owner = p.owner
and
t.owner not in ('SYS','SYSTEM')
having
sum(a.executions_delta) > 1
group by
to_char(sn.end_interval_time,'mm/dd/rr hh24'),p.owner, p.name, t.num_rows, t.
cache, t.buffer_pool, s.blocks
order by
1 asc;
-- rac_grid_block_usage.sql
-- *************************************************
-- Copyright © 2005 by Rampant TechPress
-- This script is free for non-commercial purposes
-- with no warranties. Use at your own risk.
--
-- To license this script for a commercial purpose,
-- contact [email protected]
-- *************************************************
break on report
compute sum of distinct_blocks on report
compute sum of blocks on report
set lines 132 pages 57
@title132 'Block Usage Inside SGA Block Buffers'
spool rep_out\&db\block_usage
SELECT a.INST_ID, decode(b.tablespace_name,null,'UNUSED',b.tablespace_name) ts_n
ame,
a.file# file_number,
COUNT(a.block#) Blocks,
COUNT (DISTINCT a.file# || a.block#) Distinct_blocks
FROM GV$BH a, dba_data_files b
WHERE a.file#=b.file_id(+)
GROUP BY a.INST_ID, a.file#,decode(b.tablespace_name,null,'UNUSED',b.tablespa
ce_name)
order by a.inst_id
/
spool off
ttitle off