Professional Documents
Culture Documents
Safety Data Sheet: 1. Product and Company Identification
Safety Data Sheet: 1. Product and Company Identification
This Safety Data Sheet complies with Regulation (EC) No. 1907/2006, ISO 11014-1 and ANSI Z400.1
2. HAZARDS IDENTIFICATION
Emergency Overview: Coated metal rods in varying colors. These products are normally not considered hazardous as shipped. Gloves
should be worn when handling to prevent contaminating hands with product dust.
Some of these products contain nickel, which is classified as toxic by prolonged inhalation, a skin sensitizer and a suspect carcinogen.
Nickel powder is harmful for the environment. These products contain titanium dioxide which is possibly carcinogenic. These products
contain quartz, but normally not in an inhalable fraction. Quartz can cause silicosis and may cause cancer.
Avoid eye contact or inhalation of dust from these products. Skin contact is normally no hazard but should be avoided to prevent possible
allergic reactions.
Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained
information from the manufacturer of the device.
When these products are used in a welding process, the most important hazards are heat, radiation, electric shock and welding fumes.
Heat: Spatter and melting metal can cause burn injuries and start fires.
Radiation: Arc rays can severely damage eyes or skin.
Electricity: Electric shock can kill.
Fumes: Overexposure to welding fumes may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of
the nose, throat or eyes. Chronic overexposure to welding fumes may affect pulmonary function. Prolonged inhalation of
nickel and chromium compounds above safe exposure limits can cause cancer. Overexposure to manganese and
manganese compounds above safe exposure limits can cause irreversible damage to the central nervous system,
including the brain, symptoms of which may include slurred speech, lethargy, tremor, muscular weakness, psychological
disturbances and spastic gait.
3. COMPOSITION/INFORMATION ON INGREDIENTS
These products are preparations of core wire with extruded coating.
(1)
Hazard Classification according to European Council Directive 67/548/EEC, for R-phrases, see Section 16.
(2)
Evaluation according to the International Agency for Research on Cancer.
1 –Carcinogenic to humans. 2A – Probably carcinogenic to humans. 2B – Possibly carcinogenic to humans.
(3)
Classification according to the 11th Report on Carcinogens, published by the US National Toxicology Program.
K – Known Carcinogen S – Suspect Carcinogen
(4)
Carcinogen listing according to OSHA, Occupational Safety & Health Administration (USA).
According to EC Directive 88/379/EEC, some of these products are classified with the following risk and safety phrases due to their
content of nickel:
Symbols:
Harmful:
R-phrases: R40 – Limited evidence of a carcinogenic effect.
R43 – May cause sensitization by skin contact.
R48/20 – Harmful danger of serious damage to health by prolonged exposure through inhalation.
S-phrases: S2 – Keep out of the reach of children.
S22 – Do not breathe dust.
S24 – Avoid contact with skin.
S37 – Wear suitable gloves.
Refer to ESAB “Welding and Cutting - Risks and Measures”, F52-529 “Precautions and Safe Practices for Electric Welding and Cutting”
and F2035 “Precautions and Safe Practices for Gas Welding, Cutting and Heating” available from ESAB, and to:
USA: Contact ESAB at www.esabna.com or 1-800-ESAB-123 if you have questions about this SDS.
American National Standard Z49.1 “Safety in Welding and Cutting”, ANSI/AWS F1.5 “Methods for Sampling and Analyzing
Gases from Welding and Allied Processes”, ANSI/AWS F1.1 “Method for Sampling Airborne Particles Generated by Welding
and Allied Processes”, AWSF3.2M/F3.2 “Ventilation Guide for Weld Fume”, American Welding Society, 550 North Le Jeune
Road, Miami, Florida, 33135. Safety and Health Fact Sheets available from AWS at www.aws.org.
OSHA Publication 2206 (29 C.F.R. 1910), U.S. Government Printing Office, Superintendent of Documents, P.O. Box 371954,
Pittsburgh, PA 15250-7954.
American Conference of Governmental Hygienists (ACGIH), Threshold Limit Values and Biological Exposure Indices, 6500
Glenway Ave., Cincinnati, Ohio 45211, USA.
Product Identity: ALL-STATE CHROMIUM-BEARING ELECTRODES Page: 6(6)
SDS Number: 5-N
Date Revised: 05/01/2014
NFPA 51B “Standard for Fire Prevention During Welding, Cutting and Other Hot Work” published by the National Fire
Protection Association, 1 Batterymarch Park, Quincy, MA 02169.
UK: WMA Publication 236 and 237, “Hazards from Welding Fume”, “The arc welder at work, some general aspects of health and
safety”.
Germany: Unfallverhütungsvorschrift BGV D1, “Schweißen, Schneiden und verwandte Verfahren”.
Canada: CSA Standard CAN/CSA-W117.2-01 “Safety in Welding, Cutting and Allied Processes”.
These products have been classified according to the hazard criteria of the CPR and the SDS contains all the information
required by the CPR.
ESAB requests the users of these products to study this Safety Data Sheet (SDS) and become aware of product hazards and safety
information. To promote safe use of these products a user should:
- notify its employees, agents and contractors of the information on this SDS and any product hazards/safety information.
- furnish this same information to each of its customers for these products.
- request such customers to notify employees and customers for the same product hazards and safety information.
The information herein is given in good faith and based on technical data that ESAB believes to be reliable. Since the conditions of use
are outside our control, we assume no liability in connection with any use of this information and no warranty, expressed or implied is
given. Contact ESAB for more information.