Polywithe® - 8000 CL
Polywithe® - 8000 CL
8000 CL
Product Description
POLYWHITE® 8000 CL is a white masterbatch with high heat stability for the colouring of polyolefins for outdoor applications.
POLYWHITE® 8000 CL contains 70 % special TiO2 (Rutile - Type) in polyethylene.
General
Material Status • Commercial: Active
Availability • Asia Pacific • Europe
Uses • Masterbatch
Processing Method
• Blown Film • Continuous Filament/Spinning • Injection Molding
• Cast Film • Foam Extrusion • Oriented Flat Film
Usage
POLYWHITE® 8000 CL is especially suited for the colouring of agricultural films where a high hiding power at a low let down ratio and additional dosage
of UV-stabilizer ( e.g. POLYBATCH UVS 210 ) is required . POLYWHITE® 8000 CL can also be used for the colouring of injection moulded articles that
are used outdoors.
A lower concentrated alternative is POLYWHITE® NG 8270 W with 60 % special TiO2.
For injection and blow moulding applications we recommend an addition rate of 0,5 to 3 % POLYWHITE® 8000 CL, depending on the opacity required.
Addition rates up to 20 % for agricultural film applications are also possible.
Remark
This formulation does not contain diarylide pigments.
Regulatory
POLYWHITE® 8000 CL can be used in food-packaging according to:
• EEC (2002/72): approved
• EEC (94/62): approved
SML and detailed information available upon request.
Packaging & Storage
POLYWHITE® 8000 CL is packed in 25 kg polyethylene bags on shrink-wrapped pallets. The storage should not exceed 12 months for optimum
performance.
The information and recommendations contained in this document are based upon data collected by A. Schulman and are believed to be reliable; however, because A. Schulman cannot anticipate or control the many different
conditions under which this information and/or product may be used, no representation is made and no warranty is given of any kind, express or implied, for completeness, accuracy, availability, suitability, usefulness, commercial
value, or non-violation of intellectual property rights of information, recommendations, and products and services directly or indirectly provided. A. Schulman assumes no responsibility for the results of the use of products and
processes described herein and expressly disclaims the implied warranties of merchantability and fitness for a particular use.