Ultra High-Speed

Monochrome Inkjet Printers

A feature-rich lineup for

NATURE-
FRIENDLY, ULTRA-FAST
monochrome printing

Monochrome printing Print speed Print size Low energy Environmental

3 trays
600 dpi 140 ppm A3 consumption certification
Where environmental friendliness

Cleaner and Friendlier

RISO’s environmental ethos is—and always has been—to design and develop products that exert the
smallest possible impact on the environment throughout their lifecycles.

Low energy consumption

• Operates on standard power • Does not generate heat like toner printers 290W (During printing)

Virtually no harmful emissions Generates virtually

• Low volumes of VOCs* • No toner particle emissions no ozone

Low resource consumption

• High-durability design means few replacement parts Less waste
• Inkjet printers do not require consumables (drum, fuser unit, etc.) like toner printers

Low TEC** value

• Low energy consumption even during continuous high-speed printing
• Energy efficiency vastly superior to other printers operating at same speed
1.62 kWh/week
*VOCs: Volatile organic compounds.
**TEC value: Typical Electricity Consumption. This value represents electricity consumed in one week, and is based on the international ENERGY STAR standard.

Richer and Fuller

High-speed HS7000 Scanner

• 100ppm (A4 LEF)
• Scan sizes up to A3
• Simultaneous duplex scanning
• Compatible with various file formats (PDF, PDF/A, TIFF, JPEG)

Face Down Finisher

• ComColor finisher exclusively for offset
stacking and stapling finished prints

Additional Sheet Feeder

• 2,000-sheet capacity
• Paper is replenishable even during
printing
• Easy access and loading
and productivity unite.

Smarter and Faster

Enjoy enhanced time efficiency, optimized TCO, and consistently high quality that only RISO can deliver.

High speed, high productivity

• First print time of less than 5 seconds • 1,000 sheets in only 7 minutes 140 ppm (A4LEF)

High reliability
• Simple inkjet mechanism is durable and requires few replacement parts Less downtime
• Low maintenance

High usability
• Intuitively designed user interface • 90-degree tilt panel for easy viewing Simple operation

Lower and Higher

High cost efficiency
• Proprietary ink and color profile development
enable high quality at low running cost Low running cost
• Short printing time means reduced labor and
electricity costs

High image quality

• Piezo drop-on-demand print heads
• Fast-drying oil-based ink for minimal bleeding
and smearing Enhanced visibility
• New, higher black density improves visibility
• Resolution of 600dpi

High media flexibility Lightweight to heavyweight paper,

• 46gsm-400gsm as well as envelopes
(when optional accessories attached)

Multifunction Finisher Postscript RIP for higher productivity

• High processing speed : 140ppm
• Low power consumption : 520W • Compatible with transactional printing
(when attached to the ComColor FT1430 -Queue settings
without Folder Unit) -Tray selection per page
-Form overlay
• Stapling, punching, folding, stacking, and
booklet making.
 Specifications
Print Type Line-type inkjet system
Ink Type Oil-based pigment ink (Black)
Print Resolution Standard: 600 dpi (main scanning direction) × 600 dpi (sub-scanning direction)
Number of Gray Levels For K color (3 gray levels)
Data Processing Resolution Standard: 600 dpi × 600 dpi
Warm-up Time 2 min. 30 sec. or less (at room temperature of 23ºC)
First Print Time *1 5 sec. or less (A4 Long-edge Feed)
A4 Long-edge Feed Simplex: 140 ppm Duplex: 70 sheets/minute (140 ppm)
A4 Simplex: 108 ppm Duplex: 54 sheets/minute (108 ppm)
Continuous Print Speed *2
B4 (JIS) Simplex: 90 ppm Duplex: 42 sheets/minute (84 ppm)
A3 Simplex: 79 ppm Duplex: 39 sheets/minute (78 ppm)
Standard Tray Maximum: 340 mm × 550 mm *3 Minimum: 90 mm × 148 mm
Paper Size
Feed Tray Maximum: 297 mm × 432 mm Minimum: 182 mm × 182 mm
Printable Area Maximum: 310 mm × 544 mm
Guaranteed Print Area *4 Standard: Margin width of 5 mm Maximum: Margin width of 3 mm
Standard Tray Simplex: 46 gsm to 210 gsm *5 Duplex: 46 gsm to 210 gsm *5 for A4/46 gsm to 104 gsm for A3, B4 (JIS)
Paper Weight
Feed Tray Simplex/Duplex: 52 gsm to 104 gsm
Standard Tray Height up to 110 mm
Paper Tray Capacity
Feed Tray Height up to 56 mm (2 trays)
Output Tray Capacity Height up to 56 mm
Page Description Language RISORINC/C IV
Supported Protocols TCP/IP, HTTP, HTTPs (TLS), DHCP, FTP, LPR, IPP, SNMP (SNMP v1), Port 9100 (RAW port), IPv4, IPv6, IPSec (IKEv1)
Standard Microsoft®: Windows®, Windows Server® *6
Supported Operating Systems
Optional *7 Mac: macOS *6 Linux®: Compatible with PPD only
Network Interface Ethernet 1000BASE-T/100BASE-TX/10BASE-T×2 Channel
Memory Capacity 4 GB
Capacity 500 GB
Hard Disk *8
Available Space Approx. 430 GB
Operating System Linux
Power Source AC 100-240 V, 10.0-5.0 A, 50-60 Hz
Max. 1,000 W
Ready *9: 80 W or less
Power Consumption
Sleep *10: 2 W or less
Stand-by: 0.4 W or less
Operating Noise 65 dB (A) or less at printing
Temperature: 15ºC to 30ºC
Operating Environment
Humidity: 40% to 70% RH (non-condensing)
In use: 1,030 mm × 735 mm × 1,115 mm
Dimensions (W x D x H)
With cover and tray closed: 775 mm × 710 mm × 970 mm
Weight Approx. 132 kg
With the front cover open and the operation panel in the upright position:
Dimensions When Operating (W x D x H)
1,185 mm × 1,225 mm × 1,115 mm
Scanner HS7000, Additional 2000 Sheet Feeder FG20, Face Down Finisher F10,
Accessories Multifunction Finisher FG20/Folder Unit FG20, Auto-Control Stacking Tray II, Wide Stacking Tray,
ComColorExpress RS1200C, PS Kit FG10, IC Card Authentication Kit II, Envelope Feed Kit, Card Feed Kit

Specifications are subject to change without notice.

*1 Within 10 minutes after the last print job.

*2 When using plain paper and recycled paper (85 gsm), and standard density setting. Chart used: Print measurement pattern [Color measurement sample 2 (JEITA standard pattern J6)].
The continuous print speed varies depending on the type of optional output equipment connected.
Face Down Finisher: [Without offset:] 140 sheets/minute (A4-LEF Simplex), [Offset output:] 115 sheets/minute (A4-LEF Simplex).
*3 When using duplex print: 340 mm × 460 mm.
*4 The guaranteed area when printing images is the area enclosed within 5 mm of the edges of the paper. The margin when printing envelopes is 10 mm.
*5 Duplex printing is not guaranteed with thick paper the weight of which is greater than 104 gsm.
*6 For the OS version, please refer to the RISO Website or contact your local sales representative.
*7 Optional PS Kit FG10 or ComColor Express RS1200C is required.
*8 One gigabyte (GB) is calculated as 1 billion bytes.
*9 Without printing and temperature adjustment operation.
*10 When setting [Power Consumption (in sleep)] to [Low].

Environmental Certifications

Ink Cartridges
Color: Black

, , and ComColor are trademarks or registered trademarks of RISO KAGAKU CORPORATION. Mac and macOS are trademarks of
Apple Inc. Microsoft, Windows, and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries. Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries. Other corporate names
and/or trademarks are either registered trademarks or trademarks of each company, respectively.

RISO KAGAKU CORPORATION

5-34-7 Shiba, Minato-ku, Tokyo 108-8385 Japan
https://www.riso.com/

Printed in Japan. RAD No. 9711180 2020/10