Panzer Corps Manual
Panzer Corps Manual
Recommended Spec
RAM: 2GB RAM or more
VIDEO: 128Mb video card or more
SCREEN: 768 pixels high or more
Please ensure your graphics and sound drivers are up to date before playing the game or you
may experience graphical glitches or more serious errors. Check your manufacturer’s website
for the latest version, as new drivers are released regularly.
1.2. INSTALLATION
Please ensure your system meets the minimum requirements listed above. To install the
game, either double click on the installation file you downloaded or insert the Panzer Corps
4
Introduction
CD into your CD-ROM drive. If you have disabled the autorun function on your CD-ROM or if
you are installing from a digital download, double-click on the installation archive file, then
double click on the file that is shown inside the archive. Follow all on-screen prompts to
complete installation.
5
You can also access patches and updates via our “Games Section” (http://www.matrixgames.
com/games/), once there select the game you wish to check updates for, then check the
“downloads” link. Certain value content and additional downloads will be restricted to
“Members Area” members. so it is always worthwhile to sign up there.
Remember, once you have signed up for a Matrix Games Member account, you do not have
to sign up again at that point you are free to register for any Matrix Games product you
purchase.
Thank you and enjoy your game!
6
Introduction
2. GETTING STARTED
2.1. MAIN MENU
After an intro video you will enter the main menu, where you have the following options:
»» New Game – Start a new single player game
»» Load Game – Load a previous saved game
»» Multiplayer – Start a multiplayer game
»» Library – WW2 equipment info, game reference information and credits
»» Exit – Quit the game
In the Library menu you will find some additional reference information about the game,
complementing this manual, and also historical background about some of the most important WWII
and aircraft. You can switch game language by clicking the small flags at the bottom of the screen.
7
The 1939 campaign comprises the whole of WWII from the German point of view, and is the
recommended campaign option. It starts from invasion of Poland in 1939, and ends with
defence of Germany from the Allies in 1945. Alternatively, if you show yourself as a brilliant
commander, it is possible to the end the war with Germany victorious in a number of what-if
scenarios in the USA, Great Britain and the Soviet Union.
The 1941 and 1943 campaigns start later, and the balance shifts more heavily in favour of the
Allies as the war progresses, so they are more challenging and recommended to veteran players.
Panzer Corps: Afrika Korps includes one big campaign with two alternative endings: a historical
one, ending with german withdrawal from Africa, and a fictional one, which ends with the
conquest of India, the crown jewel of the British Empire.
If you have any expansions installed, you can use the icons on the left and right side of the
campaign selection screen to switch between them. DLC content is accessed using the “More
campaigns” button in the bottom-right corner of the screen.
Before going into the first battle you will be able to set some game options and you will be
briefed about the upcoming challenge.
2.3. LOAD/SAVE
Saved games are either located in “My Documents\My Games\Panzer Corps” folder or
“Documents\My Games\Panzer Corps” depending upon your operating system.
You can load your saved game from the main menu, from the System menu in the main UI, or
by using the hotkeys Ctrl+L to load or Ctrl+S to save a game.
8
Introduction
2.4. TUTORIAL
Initially you should play the tutorial campaign to familiarise yourself with the controls and
game mechanics. We strongly advise new players to play through the tutorial campaign.
We have set up six custom tutorial scenarios that will take you through the Panzer Corps boot-
camp, fighting against your fellow German countrymen in the Blue Team to learn the basics.
Within the options you can choose what side you want to play: Axis or Allies. You can also play
a “Hotseat” game against a friend, sharing the same PC with him. You can set your desired
difficulty setting, there are 5 difficulty settings in total: from Sergeant to Field Marshal.
»» Sergeant. Choose this level only if you completely
and absolutely hate any challenge.
»» Lieutenant. This level is suitable for players who never played
Panzer Corps or other similar wargames in the past.
9
»» Colonel. Good default level for players who have some experience with Panzer
Corps or similar wargames, when playing a scenario/campaign for the first time.
»» General and Field Marshal. Recommended to veteran players.
If you beat the game on the highest Field Marshal difficulty, three additional bonus levels will
be unlocked.
You can also turn on or off: Weather, Supply, Fog of War and Undo.
»» Weather. With this setting on, the weather and ground state will
change dynamically in the course of a battle. Some weather types and
ground states can negatively effect the course of your operation.
»» Supply. With this setting on, the units will spend fuel and ammo for moving
and fighting, and you will need to resupply them in a timely manner.
»» Fog of War. With this setting on, enemy units on the map will not be shown,
unless they are within the spotting radius of your own units.
»» Undo. With this setting on, you will be allowed to undo
your moves, provided that your units do not run into
previously unspotted enemy units when they move.
3. USER INTERFACE
3.1. TACTICAL MAP
The Tactical map occupies the biggest portion of the screen, and this is where most action
takes place. Units move around and fight on the tactical map, cities and other important
objects get captured etc.
10
The Interface
Moving the cursor to a screen edge will automatically scroll the map in that direction. You can
also drag the map holding the left mouse
button or use arrow keys on the keyboard.
Click on the mini-map to quickly jump to any
location.
The map can be zoomed in and out by using a
mouse wheel or keyboard shortcuts (+ or Pg
Down to zoom in, - or Pg Up to zoom out). Also,
the Strategic Map button in the UI sidebar
presents a reduced, screen-sized map that is
useful for overview and planning.
The map is divided into hexes. Each hex can
contain no more than one ground/naval and
one air unit. When two units share the same hex, one of them is shown big and the other -
small. You can toggle the map to show big surface or air units. Axis and Allied units differ in
colour. Also, Axis units are marked with grey strength plates, while Allied units have green.
In most scenarios your goal is to capture or hold Victory hexes. The control flags for Victory
hexes have gold borders to make them stand out.
Each hex represents a certain terrain type like: Clear, Forests, Swamps, Hills, Rivers etc…
Each terrain type affects a unit’s movement and combat in its own way. Thus, natural
obstacles like wide rivers or heavy mountain ranges are difficult to cross, and so complicate
the offense and favour the defence.
Every unit has one move and one attack per turn. Any actions remaining to a unit in a given
turn are indicated by small icons above the unit’s strength plate. Note that recon units do not
spend their move action while they still have any movement points left.
11
You select units under your control and give them orders to move and attack with the left
mouse button. Alternatively, you can switch the game to 2-button mouse interface used in
some other modern games, then you will use left button for selection and right button for
moving and attacking. Mouse interface is configured in the game menu.
You can cycle through your units with remaining useful actions using the Previous Unit and Next
Unit buttons in the UI sidebar. Right-click on any vacant hex to de-select a unit. When finished
with moving your units, pass the turn on to your opponent by clicking the End Turn button.
On the tactical map you will see cities, ports, airfields and other important objects for your
current battle. The ownership of each object is indicated with a flag. To capture an object,
move a friendly unit into it. Naval, air and supporting units cannot capture objects, so the only
classes capable to capture an object are: infantry, tanks, recon and Anti-Tank (AT).
In cities connected to the railroad network you can
embark or disembark your ground units on trains to
move them faster around the map.
Airfields are critical for supply of your air units: planes
can only be supplied if they are located directly above
an airfield, or adjacent to it. Also, airfields allow you
to load infantry units and light guns on air transports
and air lift them to other airfields. Paratroopers of course can be parachuted almost anywhere.
Note that most air transports cannot carry a unit’s organic transports (e.g trucks), so you will
be prompted to ‘Abandon truck’ when loading units
equipped with them on air transport.
In ports you can embark your ground units onto naval
transport and disembark them later onto any free
coastal hex. Ports also serve as supply hexes for naval
units in those rare cases when you need to replenish
their fuel or ammo reserves.
3.2. UI SIDEBAR
On the right side of the screen you can see the UI sidebar. It displays a lot of useful information
about the battle, and contains additional game controls. You can hide the UI sidebar at any
time to see more of the map on the screen, or show it again using the F hotkey.
On top of the sidebar you see from left to right:
current turn, total turns, and the amount of prestige
points available to you.
You will earn prestige points by winning scenarios
and taking cities, and you can spend those prestige
points on upgrading, repairing, replacing or buying
new units and equipment.
12
The Interface
Beneath are: current weather, the End Turn button and the next turn weather forecast. You can
click on both weather icons to get a more detailed weather report.
Underneath this are 9 unit order buttons. From left to right and top to bottom they are:
»» Undo: cancel your move, note this is only
possible if you haven`t attacked, encountered
any enemy units with your move and still
have the unit selected! This function is
only available when the Undo option is
turned on before starting a new game.
»» Supply: use the turn to supply your unit with
fuel and ammunition. Tooltip shows how
much fuel and ammo the unit will get.
»» Sleep: wait one turn.
»» Replacements: use the turn to replace casualties with recruits. It also adds
some supply. Tooltip shows how many strength points the unit will gain,
how much prestige it will cost, and how its experience will change.
»» Elite replacements: use the turn to replace casualties with experienced
troops. It also adds some supply. Tooltip shows how many strength
points the unit will gain, and how much prestige the action will cost.
»» Upgrade: use the turn to upgrade your unit. Ground units are upgraded
in cities, naval units – in ports, and air units – on airfields.
»» Embark/Disembark: Air/Sea/Train transport at airfield/port/city.
Tooltip shows the number of transports you have available.
»» Mount/Dismount: switch between a unit and its organic transport.
»» Switch: switch your unit between different roles (e.g.
your 88mm between AT and AA gun mode).
Underneath you will see a unit info box. Above that is a line with information about the hex
terrain type and its map position e.g. Forest (10, 12) or
Swamp (14, 8).
Info on the selected unit is displayed as follows from
top to bottom, left to right:
Unit class icon, national flag, experience stars (from
zero for green to five for elite units).
The unit name, type and below that: strength, fuel,
ammunition and entrenchment level.
You’ll also see all this info for any unit under the cursor.
Lastly underneath the unit info you have 4 buttons.
13
»» Toggle Unit List. Shows all your units deployed on the battlefield. Click a unit
to instantly jump to it on the tactical map. Info shown: unit icon, strength,
experience, organic transport assigned and any medals or heroes.
»» Toggle Stats Panel. Shows the stats of the selected unit (on the left), and
any unit under the cursor (on the right). This allows you to compare units
stats easily. See the Unit Statistics section for details on all unit stats.
»» Toggle Reserve List. Shows all units in your reserve. They can be deployed on
the map and participate in the battle as long as you have enough free unit slots.
»» Show Messages. Opens chat window with all messages sent by you and your
opponent in Multiplayer. Scenario briefings and messages are also logged
here, so you can check them again any time using Messages window.
Only one of the lists (unit list or reserve list) can be active at any given time. So, opening one
of them will close the other.
Underneath the unit box are 6 more buttons from left to right: Previous Unit, Next Unit, Toggle
between Air/Ground surface mode, Toggle the Strategic Map, Open up the Purchase Screen
and lastly the Game Menu.
The Strategic Map provides a quick overview
of the battle by fitting the entire map onto the
screen. Cities, ports and airfields controlled by
the Axis are grey, while those controlled by the Allied side are green. Victory hexes have
a golden border around them. Axis units are grey, Allied units are green, and all units are
marked with their unit class icon.
The Strategic Map can show ground or air units but not both at the same time. Toggle the
Ground/Air button to switch between views. To see terrain and city ownership more clearly,
press and hold Space to temporarily remove all units from the strategic map.
14
The Interface
As in the tactical map mode, hovering the mouse over any unit will bring up additional details
in the UI sidebar. Click on any hex to close the Strategic Map and centre the tactical map on
that location.
The Purchase Screen is useful not only to buy additional units but to review all unit types
available to you in the scenario and their statistics.
On the left are two important parameters affecting your ability to purchase new units: prestige
and unit slots. Every unit type has an associated cost and cannot be purchased without
adequate prestige. Slots determine the maximum number of units you can have in a given
scenario. If all slots are filled, no more purchases are possible. You can also choose the nation
and unit class to display.
All units in the list are marked with a green or red background. Red means that the unit
cannot be purchased (but you still can select it and review its stats). If a selected unit can be
equipped with a transport, available transport options are shown at the bottom. If any of the
stats icons are unclear you can hover or click the stat icon to get more information.
You can compare stats by selecting one unit and placing the cursor over another. A red or
green number indicates a weaker or better statistic respectively.
15
The in game menu allows: Save or Load game, Restart Scenario, Surrender a game, visit the
Library, Quit to Main Menu or Quit to Desktop.
16
The Units
4. UNITS
4.1. UNIT CLASSES
INFANTRY
The infantry forms the backbone of any army during WWII. Infantry are the king
of close terrain, like cities, forests and mountains. In such terrain infantry are
able to effectively exploit the weak spots of enemy units, by shooting against
the opponent’s close defence rating. This makes them deadly against even the most well
protected heavy tanks. In its close fighting role infantry is indispensable on both the defensive
and offensive. But in the open it becomes more vulnerable to enemy armour attacks. Infantry
units move slowly on foot, but can be equipped with transports to increase their mobility.
TANK
Tanks are armoured tracked fighting vehicles equipped with a rotating turret. In
Panzer Corps the tank is one of the most useful and versatile units - powerful,
well protected and mobile. They can strike deep into enemy territory, outflanking
and bypassing fortified spots, destroying vulnerable support units (like artillery and anti-air
guns) and preventing an organized defence and disrupting an enemy buildup behind the main
front line. They are also useful for protecting more vulnerable offensive units, like artillery and
infantry, from enemy counter attacks. However, attacking entrenched infantry in close terrain
with tanks is usually not a good idea - even the strongest tanks may take heavy casualties
in this type of combat.
RECON
Recon units have good mobility, superior spotting range and a special “recon
movement” ability which make them ideal for scouting the map and uncovering
enemy units in the path of any offensive. Very often the success of your operation
17
will depend on proper reconnaissance, so it is usually a good idea to have a few recon units in
your army. Recon units can also be used in combat, especially for mop-up tasks or to damage
vulnerable supporting units.
ANTI-TANK
AT Weapons are designed and used primary against enemy armour. Even self-
propelled anti-tank units are less flexible and versatile than tanks, because they
are less effective against soft targets. Also, most of them are equipped with a fixed
turret, which makes them less suited for the offensive (attacking a tank with a fixed turret
AT results in an initiative penalty to the AT unit). But they excel in a defensive role, effectively
protecting choke points from an enemy armour breakthrough. They are also much cheaper to
produce, and so can be valuable assets in case resources are scarce.
ARTILLERY
Artillery fire is not very accurate and so rarely results in direct damage. But artillery
is extremely useful as a support unit, both on offense and on defence. On the
offense, artillery units can fire at the enemy from a safe distance, causing heavy
suppression and making the enemy an easy target for assault troops. On the defence, artillery
units provide defensive fire to any friendly ground units positioned next to it. If one of these
units is attacked by an enemy unit, the artillery will fire at it first. Any strength suppressed or
killed by the defensive fire will not participate in the attack. Towed artillery units are extremely
slow and so moving them between distant locations is only feasible if they are equipped with
a transport. However, self-propelled artillery units can travel with good speed on their own.
ANTI-AIR
AA units are used to protect land and naval targets from air attacks. Because of
their relatively poor mobility, AA units are hard to use to gain air superiority, but
they are valuable on the defence, providing protection against air attacks to all
adjacent ground units. Some AA units were successfully used in an anti-tank role (the most
famous example being the German 88mm Flak gun), so in Panzer Corps you can switch such
units to AT mode. However, while in AT mode, they can no longer provide AA protection to
friendly units.
FIGHTER
Fighters are your ultimate weapon when struggling for air superiority. They can
oppose enemy fighters and are usually devastating against enemy bombers and
air transports. Also, fighters are useful in a defensive role: when placed next to
a friendly bomber, they protect it from attacks by enemy fighters. Fighters can be used for
attacking ground targets, but are much less effective in this role.
18
The Units
TACTICAL BOMBER
Tactical bombers deliver precise blows at enemy units from the air. They are
especially effective against vehicles with poor protection, like trucks and guns,
but also useful against armoured vehicles like tanks and recon units. However,
they are much less effective against infantry. Tactical bombers can be very valuable assets in
an offensive, but they are very vulnerable to both enemy aircraft and ground anti-air systems
(especially when attacking), and so must be used with great care.
STRATEGIC BOMBER
Strategic bombers perform bombing raids from great heights and so are much
less precise than tactical bombers. Their attacks rarely result in direct kills of
enemy strength, but give a lot of other benefits: they cause heavy suppression of
enemy troops and destroy their fuel and ammo reserves, thus making them easy targets for
other units. Strategic bombers are useful against any ground targets and are usually much
less vulnerable to ground anti-air systems (although they still must fear enemy fighters). They
are also effective against enemy ships. When used against enemy cities or airfields, strategic
bombers can destroy their capacity to supply enemy units and produce new ones.
STRUCTURES
Many different structures were used in WWII, and some of them are represented
in Panzer Corps. The most important structures are forts and bunkers which
are often quite hard and time-consuming to subdue. The best tactics against a
fortified structure is to use a combined attack of aircraft, artillery and ground assault troops.
Another structure type you will encounter is radar. Radar is good at observing territory around
them, but also they provide support to all friendly air units within their spotting range by giving
them an initiative bonus in combat. So, by destroying enemy radar you can make the air war
easier for your fighters.
CAPITAL SHIPS
These large ships have extremely long ranges and can attack naval and ground
targets from great distance. When used for ground bombardment, much like
artillery, they rarely cause direct damage - instead they cause long-term
suppression which can be exploited by a well-timed ground attack. Capital ships cannot
attack submarines, and so rely on destroyer escort to deal with this threat. Due to their big
size, they are also vulnerable to heavy bombers.
SUBMARINE
Submarines are naval vessels capable of moving and attacking while being
submerged. They can be used against enemy transport ships and war ships with
deadly efficiency. The only units which can harm a submarine are destroyers and
tactical bombers, but even when attacked by these units, a submarine has a good chance to
evade the attack and completely avoid any damage.
19
DESTROYERS
Destroyers are your primary anti-submarine weapons. Thanks to their good
spotting range and mobility they excel in their escort role, but are vulnerable to
capital ships and can only attack ground targets on adjacent hexes.
CARRIERS
Carriers serve as mobile airfields that can resupply fighters and tactical bombers.
This makes them useful for naval invasions where land-based airfields are not
available or are too far away from the action. Note however that a plane needs
to be directly above the carrier to be supplied so only one unit a turn can be supplied, and
strategic bombers cannot be resupplied by carriers. Carriers have no combat stats themselves
and need escorts to protect them from enemy attacks.
LAND TRANSPORTS
These transports can be assigned to infantry and towed guns in order to increase
their mobility. Transports enable these slower units to advance on par with tanks
and self-propelled guns. However, increased mobility comes at a price. When a
unit uses its organic land transport to move, it stays in the transport for the duration of the
opponent’s turn. This makes the unit more vulnerable to ground and air attacks. Also, note
that a unit cannot go to a hex where its organic transport cannot go. In particular, the ability
of mountain troops to cross mountains ranges will be seriously limited if they are equipped
with an organic transport.
SEA TRANSPORTS
These units are used to move ground units across the sea and are essential in
operations involving any naval invasion.
AIR TRANSPORTS
These units are used to transport infantry units from airfield to airfield at great
speed. They can also carry paratroopers to their drop zones.
RAIL TRANSPORTS
These units are used to move other ground units at great speed using the railroad
network.
ARMOURED TRAINS
These trains carry a lot of firepower, but they are restricted to following the
railroad network.
RIVER BOATS
These small boats have a unique ability to travel both in sea and along the rivers,
but their firepower is weaker than the larger ships.
20
The Units
COST
The prestige required to purchase a unit. Also affects the cost of replacements.
Note that the total cost of a unit includes the cost of its organic transport too.
STRENGTH
Current strength of the unit. Strength is killed in combat and replenished using
Replacements and Elite Replacements commands. In combat every point of a
unit’s strength has a chance to score a kill, so the more strength a unit has, the
more effective it is in combat.
MAX STRENGTH
Maximum strength a unit can normally have. Elite units can be over-strength and
exceed this number by one point per every experience star.
21
FUEL
Number of remaining fuel points. Fuel is spent on movement and replenished
using the Supply command.
MAX FUEL
Maximum amount of fuel a unit can have when fully supplied.
AMMO
Number of remaining ammo points. A point of ammo is spent every time the unit
fires at an enemy unit. Ammo is replenished using Supply command. Note that
units with [1] attack rating do not spend ammo when using such attack.
MAX AMMO
Maximum amount of ammo a unit can have when fully supplied.
ENTRENCHMENT
Entrenchment level of the unit. Each point of entrenchment increases the unit’s
defence in combat (by ½ against infantry and by 1 against all other units) and
improves the unit’s chance to put up a rugged defence. Entrenchment growth rate
depends on the terrain and the unit’s class. Infantry units are the fastest to entrench, tank
units are slowest. Clear terrain is the worst for entrenching in, rough terrain like cities, forests
and mountains is the best. Every attack on a unit reduces its entrenchment by 1.
EXPERIENCE
The current experience points. Experience is earned in combat and lost when a unit gets green
replacements. Every 100 points of experience gives one experience star. Each star gives the
unit various bonuses to initiative, attack and defence, making the unit more powerful and
persistent. Normally a unit can have a maximum of 5 stars, but some scenarios may have
their own (lower) cap on the unit experience. In particular, many scenarios in Grand Campaign
DLCs have an experience cap.
SPOTTING
Spotting radius (in hexes). All enemy units within spotting radius will be revealed
on the map, with a few exceptions. In particular, minefields and submarines are
harder to spot than most other units, and so they may not be revealed on the map
even if they are within your unit’s spotting radius.
22
The Units
RANGE
Unit’s shooting range (in hexes). A range of 0 means that the unit needs to start
adjacent to the target and actually enter the hex occupied by an enemy in order to
attack it, and risk a counterattack.
INITIATIVE
Initiative is a complex measure of unit’s gun range, optics, manoeuvrability and
training, which indicates how much damage the unit can do before the enemy has
a chance to shoot back. The bigger your initiative advantage, the more strength
you can kill/suppress before the enemy counterattacks you, and so the less effective this
counterattack will be.
SOFT ATTACK
Unit’s attack strength against “soft” (i.e. un-armoured) targets, such as infantry,
trucks and towed guns.
HARD ATTACK
Unit’s attack strength against “hard” (i.e. armoured) targets, such as tanks and
armoured recon cars.
23
The Units
AIR ATTACK
Unit’s attack strength against air targets.
NAVAL ATTACK
Unit’s attack strength against naval targets.
Any of the four attack ratings can be shown in square brackets (e. g. [2]). This
means that attack is “passive”: the unit cannot initiate such an attack on its own, but it will
counterattack if attacked by the enemy. Units with passive attacks also do not trigger ambushes.
GROUND DEFENCE
Unit’s defence rating against ground and naval units.
AIR DEFENCE
Unit’s defence rating against air units.
CLOSE DEFENCE
Unit’s defence rating when it is being shot at from short distance. In this situation
the enemy can exploit any weak spots in the unit’s protection, and so the Close
Defence is often much less than its Ground Defence. In close terrain (like cities,
forests and mountains) infantry always shoots against the opponent’s Close Defence rating.
This makes infantry especially dangerous in close terrain. Also, Close Defence is used if the
unit is ambushed by the enemy.
TARGET TYPE
Determines what kind of attack must be employed against this unit. There is a
corresponding target type for each of the four attack ratings available in the game:
soft, hard, air and naval target types.
KILLS/LOSSES
Amount of enemy strength points destroyed by the unit. When a unit reaches a certain amount
of kills, it can be awarded with a medal or get a hero. In addition to this, the game tracks the
number of units destroyed by this unit, separately for each unit class. Losses number tracks
all strength points lost by the unit in the course of a campaign. You can see a unit’s relative
effectiveness by comparing its kills to its losses.
BATTLE HISTORY
A listing of all important events which happened to this unit in the course of the game.
Unit statistics are shown in main UI and on the Purchase screen. Also, a complete list of all
the unit’s statistics can be seen on two tabs in the unit details screen. This screen is invoked
by right clicking the unit on the tactical map. An alternative method is to Alt+click the unit in
the unit or reserve list in the UI sidebar.
24
The Combat
MILITARY ENGINEERS
Military engineers are specially trained to fight in entrenched positions. For this reason they
completely ignore the enemy unit’s entrenchment level and are immune to rugged defence.
These units are also very effective against enemy structures, including forts and bunkers, and
are able to completely clear a minefield in a single turn.
Military engineers are indicated by an infantry icon with a flamethrower.
BRIDGE ENGINEERS
Bridge engineers are used to bridge rivers and allow other units to cross them easily. To use
a bridge engineer unit, just move it into a river hex, and other units will move as if there was
a bridge in that hex. Bridge engineers can bridge both minor and major rivers. Unlike other
units, bridge engineers do not suffer combat penalties when attacked on a river.
Bridge engineers are indicated by an infantry icon with a portable pontoon bridge.
PARATROOPERS
Paratroopers have a special ability to jump from air transports on any free hex on the map.
When they do, they have a certain chance to miss their target and disembark on an adjacent
free hex. They also get some suppression when parachuting, which makes them somewhat
vulnerable to enemy attacks, so plan your landings carefully. Paratroopers are specifically
trained to make diversions behind enemy lines, so they are very effective against enemy
structures, including forts and bunkers.
Paratroopers are indicated by an infantry icon with a parachute.
25
5. CAMPAIGN PLAY
In a campaign game your core units travel with
you from battle to battle. Core units have a golden
border, while auxiliary units have a silver border
around their strength plate. Auxiliary units only serve
with you for a single battle and then are reallocated.
In the unit list your core units have a golden border, your auxiliary units a silver border.
Before every battle in the campaign a deployment phase takes place, where you can manage
your core units, e.g., give units green or elite replacements, “over-strength” or upgrade them
– all without having to spend a turn. To do so, select a unit in the reserve list and click the
appropriate button in the UI sidebar. You can also purchase additional units by clicking the
Purchase button. At the beginning of the deployment phase the game will notify you of any
new equipment types that became available since the last battle, so you will know what
upgrade options are available to you.
Note that in Panzer Corps losses are not replaced automatically between battles. This must
be done manually. During the deployment phase green replacements are free, so you can
always bring your core units to full strength, but they will lose some experience in the process.
By giving your units Elite replacements you preserve their hard-earned experience but at the
cost of prestige points.
To deploy a unit, select it from the reserve
list and then click the desired deployment
hex. Use the strategic map to quickly find all
deployment hexes on the map (they will be
marked with an arrow). You can also right-
click a deployed unit on the map to un-deploy
it and place it back in reserve list.
After the battle the game will display the
outcome. Three different outcomes are
possible: a decisive victory, a marginal victory
and a loss. Depending on the outcome of each
battle/scenario you will progress through the campaign along a different path. This makes the
re-playability of the campaigns even greater, depending on your abilities and record every
campaign game in progress could turn out different.
In the course of the campaign your units will be awarded with medals and heroes for their
performance, and these will of course migrate from scenario to scenario together with the
units. There can be a maximum of 3 awards and 3 heroes on each unit, and each hero will
improve the unit’s statistics in some way. Each hero is indicated with a golden dot on the
bottom side of unit’s strength plate. Heroes are also shown in the unit list, and you can hover
over them with the mouse cursor to get information on their bonuses.
26
The Combat
6. GAMEPLAY CONCEPTS,
RULES AND TACTICS
6.1. ZONE OF CONTROL
Each ground and naval unit in Panzer Corps projects a zone of control (ZOC) on six hexes
adjacent to it. When a unit enters an enemy’s zone of control, its movement stops. Note that
naval units do not affect movement of enemy ground units, and vice versa. Recon units can
use their recon movement ability to sneak through enemy zone of control. ZOC rules are not
used for air units.
6.3. WEATHER
Weather icons are shown at the top right of the screen next to the End Turn button. The
left icon shows current weather, the right icon the forecast for the next turn. Forecasts are
27
not 100% accurate and will give wrong
information in approximately one case
out of five. Still, the forecast is worth
considering when planning your actions as
bad weather can have dramatic effects on
combat. For example, in rain and snow air
units cannot engage in combat and their
spotting range drops to zero.
28
Additionaly
29
The Combat
Only entrenched units can put up rugged defence and the higher entrenchment level, the
more likely it becomes. That’s why it is often a good idea to soften an entrenched unit with
bombers and artillery before attacking it. Also, experience levels of the attacker and defender
affect the chance of rugged defence. Experienced units are less likely to run into rugged
defense, and have a better chance to catch enemy unit in it on defence. While planning your
attack, you can see the exact chance of rugged defence in the extended combat prediction
window, invoked by Ctrl+click on an enemy unit.
Military engineers are specifically trained to fight against entrenched enemies and so are
immune to rugged defence.
6.9. EVADE
When attacked by destroyers or tactical bombers, submarines have a 50% chance of evading
the attack and completely avoiding damage. Keep this in mind when planning your naval
battles.
6.12. RIVERS
Rivers are among the most important natural obstacles you will encounter in the game. A
unit always spends all its movement points to enter a river hex and while there it gets severe
penalties if it attacks or is attacked. The only exception to this rule occurs when the rivers
become frozen. A frozen river is easy to cross and does not impose any combat penalties.
30
Additionaly
6.16. MINEFIELDS
Minefields are units with special properties. They are immobile, have zero spotting and do
not project a zone of control. Friendly units can go through minefields, but such movement is
slower than normal (costs two additional movement points). Enemy units cannot pass through
a minefield until it is eliminated.
Military engineers destroy enemy minefields with a single attack. You can also use artillery
and capital ships to bombard minefields and reduce their strength from a safe distance. All
other units can attack minefields as well, but their effectiveness is limited and they will take
some damage in return.
Detecting enemy minefields is difficult. They can only be spotted by a ground unit standing
next to them, and only with a 33% chance of success. Naval and air units do not spot
minefields at all. Of course, running into a hidden minefield reveals it on the map, but the
moving unit will take some damage.
31
The Combat
6.17. GLIDERS
In a few scenarios you can use a special type of air transports – gliders. Two examples of
gliders present in the game are DFS 230 and Messerschmitt Me 323 Gigant. Unlike normal
air transports, the gliders can disembark a unit they carry on any free hex, not just on an
airfield. Note that heavy gliders (like Gigant) can carry not only infantry and light guns, but
also armored vehicles and tanks, which makes them very useful.
7. MULTIPLAYER
Panzer Corps includes a very comprehensive and easy to use multi-player system. To reach it,
select Multiplayer from the main game menu. If you already have a Slitherine forum username
or have previously played other multiplayer games on our server, choose the login option and
enter your details. If you are new to Slitherine, register your username and password in game.
You can use these details to log in to the Slitherine forum and view stats or chat to other players.
The revolutionary PBEM++ (Play by E-Mail) system does not require you to organise games in
advance; you do not even need to be online at the same time as your opponent. It is as simple
to play as a single player game, removing all the barriers to entry of other multiplayer games.
It really needs to be tried to be believed!
When you arrive in the Lobby, you’ll see 3 tabs. The first tab, “My Games”, lists any games
you currently have going. The middle tab is how you issue a challenge to start a new game,
while the third lets you view any
challenges from other players
looking to start a game. You can
accept these to get playing.
Any games displaying a padlock icon
are private challenges only available
to specific opponents.
If you want to start your own
challenge, click the “Issue
Challenge” button and you’ll see a
list of available scenarios. Select the
one you wish to play and then select
32
Additionaly
your side and game options. By moving the handicap slider you can give a 25%, 50% or 100%
bonus to prestige and experience to any of the two sides. This can be useful to make certain
unbalanced (historical) scenarios more evenly matched. Specify a password if you want to
create a private challenge. Your opponent will need to know the password in order to accept
such challenge.
A “Paired Game” is a locked private challenge, where players can invite and play a specific opponent.
Once you have an opponent, the game moves to “My Games“. If it is your turn you’ll be able to
select the game and press Play. If not, you’ll have to wait for your opponent to take their turn.
If your opponent was not active for a long time, you can try to claim the game as your victory
using the Claim button.
When your opponent has moved you’ll be notified by e-mail. It is very important that you
enter your real e-mail address when registering or you will not see the e-mail alerts when it
is your turn.
8. EDITOR
The game includes the editor we used to build all the scenarios so you can do anything we
can do. The shortcut to launch the scenario editor is located in Windows Start menu, next to
the shortcut for the game itself.
Have a look and read the Scenario Editor Manual document for further information and
instructions on how to best master the scenario editor.
Have a look and read the Scenario Editor Tutorial document for further information and
instructions on how to best master the scenario editor.
8.1. MODDING
Panzer Corps provides a lot of modding options. You can edit and create new scenarios, alter
equipment table and campaign structure, tweak game rules and UI.
For help modding and creating scenarios, please visit the Panzer Corps modding forum at
www.slitherine.com/forum.
33
9. HOT KEYS
You can use the following hot keys in Panzer Corps:
34
Additionaly
10. CREDITS
THE LORDZ GAMES STUDIO & MATRIX GAMES & SLITHERINE
FLASHBACK GAMES STUDIO CHAIRMAN
CEO AND EXECUTIVE PRODUCER JD McNeil
Tim van der Moer DEVELOPMENT DIRECTOR
TECHNICAL DIRECTOR AND MAIN DESIGN Iain McNeil
Alex Shargin OPERATIONS DIRECTOR
CREATIVE DIRECTOR Erik Rutins
Lukas Nijsten
TECHNICAL DIRECTOR
SCENARIO DESIGN AND RESEARCH Philip Veale
Kresimir Cuturic
Frank Leone DIRECTOR OF ACQUISITIONS
David Heath
UI DESIGN AND ART
Vincze István MARKETING DIRECTOR
Marco Minoli
CONCEPT ART
Mariusz Kozik CREATIVE DIRECTOR
Richard Evans
MUSIC
Alessandro Ponti PUBLIC RELATIONS MANAGER
VIDEO Sean Drummy
Michèl Niedermeier ART LEAD
STORY WRITING Marc von Martial
Frank Leone QA & PRODUCTION ASSISTANTS
Tim Delaney Christian Bassani
Tim van der Moer Andrew Loveridge
VOICE ACTING ADMINISTRATION
Inter Voice Lynda Beatty
Andreas Wobig Liz Stoltz
Bodo Henkel
MANAGER OF DEALER RELATIONS
MANUAL WRITING Karlis Rutins
Tim van der Moer
CUSTOMER SUPPORT STAFF
Alex Shargin Daniel Heath
SPECIAL THANKS TO
Osprey Publishing, Abhinav WEB DESIGN & DEVELOPMENT
Chokhavatia, Szymon Gatner, Alex Fiedler
Dave Forster, Christian Sturm, Andrea Nicola
Chris Hogg, Drew Morris,
Tarrif Goodwin, Tony Burden.
© 2012 Slitherine Ltd. and Matrix Games Ltd. All Rights Reserved. Panzer Corps, Slitherine
Ltd., Matrix Games Ltd., and their Logos are all trademarks of Slitherine Ltd. All other marks
and trademarks are the property of their respective owners. Developed by The Lordz Games
Studio.
35
PZC_PCM_ENG