Professional Documents
Culture Documents
Cop. 1132
Cop. 1132
COP 1132
Leading high-frequency
technology
COP 1132 has an impact power of 11
kW, which makes it by far the strongest
drill in its hole range on the market.
The high power has been achieved
through the now well-proven high-
Drill speeds like you’ve never seen before
frequency technology, which is largely m/min
unique to Atlas Copco. In summary,
the technology means that instead of 4,0
striking the drill steel harder, the piston
3,5 Lime
strikes it at higher frequency. This ston
e
results in faster penetration without 3,0
increasing the stress on the drill steel.
The technology is thus both gentle and 2,5 Gran
ite
extremely efficient.
2,0
Adapters
Male adapter, Ø 35 mm, L = 410 mm
Thread type R28, Ordering No. 407-15701,00
Male adapter, Ø 35 mm, L = 410 mm
Thread type SR28, Ordering No. 425-15701,00
Male adapter, Ø 35 mm, L = 500 mm
Thread type SR28, Ordering No. 425-15704,00
Male adapter, Ø 35 mm, L = 410 mm
Thread type R32, Ordering No. 403-15701,00
Male adapter, Ø 35 mm, L = 500 mm
Thread type R32, Ordering No. 403-15704,00
Female adapter, Ø 45 mm. L = 280 mm
Thread type R32, Ordering No. 403-15703-F,00
Rotation motors
OMP 80
Torque (measured on the drill steel), max. continously/temporary 220/330 Nm
Rotation speed (measured on the drill steel), max. 500 rpm
Hydraulic pressure, max. continously/temporary 140/225 bar
OMP 125
Torque (measured on the drill steel), max. continously/temporary 360/550 Nm
Rotation speed (measured on the drill steel), max. 320 rpm
Hydraulic pressure, max. continously/temporary 140/225 bar