Professional Documents
Culture Documents
Examples of Procedure Text
Examples of Procedure Text
We use the heat of an electronic iron to remove wrinkles from fabric and get our clothes tidy. In order
to do so, we need to follow these following steps.
1. Prepare the iron, the clothes, a place mat or any flat surface board, some clothing hanger.
2. Plug the iron cable into an electricity socket and wait until the iron get warmer.
5. Flip the clothes and apply the iron on the other side of the clothes evenly.
Nowadays cooking is no longer a complicated things. Especially when it comes to cooking rice, there
is an electronic device designed especially for this. We know this device as Rice Cooker, Magic Jar or
Magic Com. The following steps will show you how to operate a Rice Cooker properly.
1. Wash the cooking pot and make sure the inner side is clean.
2. Measure the rice by using the measurement cup and put the rice into the cooking pot. Make sure to give
space for the rice, water and the expansion.
3. Rinse the rice so that we can remove the pesticides that may be present.
4. Add some water into the cooking pot, usually we need to see the water is 1cm above the rice surface.
5. Soak the rice for about 30 minnutes in order to make the cooked rice stickier.
6. Put the cooking pot along with the rice and water into the Rice Cooker.
7. Close the Rice Cooker lid and then plug the cable into the electricity socket.
The word “Glue Gun” may sounds dangerous for us, but it is not an actual gun to shot a bullet. Instead
it can help us in making a handicraft. In the process the heat from the gun will melt the glue stick and
turn it into liquid form that we can use to stick anything including the parts of our handicraft. Follow
these following steps if you want to use the Glue Gun.
1. Check and clean the glue gun from any old glue clogging in the nozzle.
7. Finaly, you can apply it on any surface that you want to stick by using this glue gun.
By looking at the name “Blender”, we might be able to guess the function of this electronic
devices. We put things inside the blender in order to “blend it” or “mix it”. If you never use a
blender before, you may need to read this following procedure of how to operate a blender.
1. Prepare the ingredients that you want to mix. The ingredients can be vary, but mostly people
use blender for these following things : Ice, vegetables, fruits, milk, or any kind of food and
drinks.
2. Cut the ingredients into smaller pieces if the ingredients were solid and big.
3. Prepare the blender cup, make sure to clean it before we use it and put the blender blades on
the bottom of the cup.
4. Place the blender cup on the blender machine.
7. Add some water to help the blender mix the ingredients evenly.
9. Start the blender by pressing the speed button, you can start from the medium speed
10. Wait until we get the right texture of the mixture, we can adjust the speed and also add some
more water if necessary.
11. Open the blender and pour the mixture into a glass or bowl.
2. Choose the toasting level, usually it is from the lightest to the darkest. This will allow you to choose how
dark the toast to be.
3. Wait until the toasting process finished, usually the process only take a minute.
4. Pick the bread when the toasting process is finished and the bread pops up from the toaster slot. Then put it
on a plate.
5. Pour some sugar on the bread while it is still warm or put some butter on it.