Service Manual: LCD Monitor Acer S243HL
Service Manual: LCD Monitor Acer S243HL
Service Manual
LCD Monitor Acer S243HL
1
Table of Contents
Copyright
Copyright 2009 InnoLux Tech. Corp. Ltd
This manual may not, in whole or in part, be copied, Photocopied, reproduced, translated, or converted to any
electronic or machine readable form without prior written permission of InnoLux Tech. Corp. Ltd.
1
Acer Acer –LCD-S243HL
1. Safety precautions
This monitor is manufactured and tested on a ground principle that a user’s safety comes first.
However, improper used or installation may cause damage to the monitor as well as to the user.
Warning:
z This monitor should be operated only at the correct power sources indicated on the label on the
rear of the monitor. If you’re unsure of the power supply in you residence, consult your local dealer
or Power Company.
z Do not try to repair the monitor by yourself, as it contains no user-serviceable parts. This monitor
should only be repaired by a qualified technician.
z Do not remove the monitor cabinet. There are high-voltage parts inside that may cause electric
shock to human bodies.
z Stop using the monitor if the cabinet is damaged. Have it checked by a service technician.
z Put your monitor only in a lean, cool, dry environment. If it gets wet, unplug the power cable
immediately and consult your closed dealer.
z Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply
non-ammonia based cleaner onto the cloth, not directly onto the class screen.
z Do not place heavy objects on the monitor or power cord.
3. Service notes
z When replacing parts or circuit boards, clamp the lead wires around terminals before soldering.
z Keep wires away from high voltage, high temperature components and sharp edges.
z Keep wires in their original position so as to reduce interference.
z Adjustment of this product please refers to the user’ manual.
Acer Acer –LCD-S243HL
01 Product Specification
1. General:
Acer S243HL is designed with LVDS interface, VGA/Dual-HDMI input, LED panel and over driver
function. it featured with DC 19V adapter power supplies and audio input. It’s a green product and
meets all ROHS standard. The power button and display control buttons are on the base of the monitor.
The monitor shall automatically to display lower resolution video modes into 1920x1080 full screen
display. The image can be adjusted through OSD control. It support HDCP, Color management and
ACM function.
2. Operation Specifications
The unit should suffer no visible cosmetic damage and should operate with no degradation in display quality
during exposure to the operating conditions and after exposure to the non-operating conditions, in any
sequence.
2.4 Reliability
Items Condition Spec Note
Operating
MTBF ≧ 60,000 Hours Except panel
condition is 25°C
Luminance
LED Life time 15,000 Hours(TYP) Note1
becomes 50%
Note1. Operating with fixed driving current
Acer Acer –LCD-S243HL
3. Electrical and Optical Characteristics and Performance
3.1 Main Power Supply
3.1.1 Adapter characteristics
3.1.3 DC to DC characteristics
Note 2: Tested by DC loading side parallel with a 47uF/EC and 0.1uF/Ceramic Capacitors and measured
band-width with DC-20MHz.
Table-1
Status H-sync V-sync Video Power LED
Power On on on active ≤ 32W Blue
off on blanked < 1W Amber
Power Saving on off blanked < 1W Amber
off off blanked < 1W Amber
Power Off -- -- -- < 1W Off
Temperature : 25 ± 5°C
Test pattern : white
Video Resolution : 1920 x 1080
Video input level : 700 mV ± 2%
Warm-up time : 30 minutes
Set brightness control and also contrast control at maximum, to measure the screen center, the light
output shall BL ≥ 200 cd/m2 .
The test standard conditions refer to Sec 3.3. (Brightness and contrast are under default value)
4.1 Audio in
4.1.1 Input impedance ﹕ ≧ 10K ohm
4.1.2 Frequency response range ﹕200Hz ~ 20kHz
4.2HDMI x2
HDMI type A Connector Pin assignment:
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
4.3 VGA in
4.3.1 D-sub Connector Pin assignment:
Pin Symbol
1 Red Video
2 Green Video
3 Blue Video
4 N/C
5 Cable detect
6 Red Ground
7 Green Ground
8 Blue Ground
9 PC +3.3/+5V
10 Sync. Ground
11 N/C
12 DDC SDA
13 H sync
14 V sync
15 DDC SCL
Acer Acer –LCD-S243HL
4.3.2 Signal SPEC:
Items Condition Specification
Analog RGB signal Input impedance =75 Ohm 0.7Vp-p
Sync Input impedance ≧1k Ohm TTL level, Separate H/V-sync(+/-)
H-Sync Frequency 30K~80KHz
V-Sync Frequency 55~75Hz
Specification
Items TEST CONDITIONS
Min TYP MAX
Output power (W) 1.6 2.0 2.4 THD+N = 10%﹐AT 1KHz 1Vrms
Output impedance (Ω) 3.4 4 4.6 AT 1KHz 1Vrms
Total harmonic distortion plus noise --- --- 10% Po≦ 2.0W
Note: The low pass RC Filter (R=100Ω / C=0.047uF) for Class-D Output Power and THD+N Measurement
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 00 FF FF FF FF FF FF 00 04 72 CF AD 00 00 00 00
1 19 13 01 03 08 35 1E 78 EA 60 85 A6 56 4A 9C 25
2 12 50 54 B3 0C 10 71 4F 81 00 95 00 D1 C0 01 01
3 01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C
4 45 00 13 2B 21 00 00 1A 00 00 00 FC 00 53 32 34
5 33 48 4C 0A 20 20 20 20 20 20 00 00 00 FD 00 38
6 4C 1F 53 12 00 0A 20 20 20 20 20 20 00 00 00 FF
7 00 30 30 30 30 30 30 30 30 30 30 30 30 0A 00 BD
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 00 FF FF FF FF FF FF 00 04 72 CF AD 00 00 00 00
1 19 13 01 03 80 35 1E 78 EA 60 85 A6 56 4A 9C 25
2 12 50 54 B3 0C 10 71 4F 81 00 95 00 D1 C0 01 01
3 01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C
4 45 00 13 2B 21 00 00 1A 00 00 00 FC 00 53 32 34
5 33 48 4C 0A 20 20 20 20 20 20 00 00 00 FD 00 37
6 4B 1E 50 12 00 0A 20 20 20 20 20 20 00 00 00 FF
7 00 30 30 30 30 30 30 30 30 30 30 30 30 0A 01 4A
0 02 03 22 F2 23 09 7F 07 4E 01 02 03 84 05 06 07
1 10 11 12 15 93 1F 14 83 01 00 00 66 03 0C 00 10
2 00 00 8C 0A D0 8A 20 E0 2D 10 10 3E 96 00 13 2A
3 21 00 00 18 01 1D 00 72 51 D0 1E 20 6E 28 55 00
4 13 2A 21 00 00 1E 01 1D 80 18 71 1C 16 20 58 2C
5 25 00 13 2A 21 00 00 9E 01 1D 00 BC 52 D0 1E 20
6 B8 28 55 40 13 2A 21 00 00 1E 01 1D 80 D0 72 1C
7 16 20 10 2C 25 80 13 2A 21 00 00 9E 00 00 00 FF
5. Function Specifications
All the tests to verify specifications in this section shall be performed under the following standard
conditions unless otherwise noted. The standard conditions are:
Temperature : 25 ± 5°C
Warm-up time : 30 minutes minimum
Checking display modes : All the specified modes
Acer Acer –LCD-S243HL
5.1 Panel general specifications
Item Describe
Supplier AUO
Model name M240HW01 V6
Display Area(mm) 531.36(H)x298.89(V)
Pixel Pitch(mm) 0.27675(H) ×0. 27675 (V)
Display Colors 16.7M colors (RGB 6-bit + Hi_FRC)
Number of Pixel 1920(H) × 1080(V),Full HD
Brightness 250 cd/m2 (TYP.)
Contrast Ratio 1000 (TYP.)
Viewing Angle 170 (Horizontal) / 160(Vertical) (CR≧10)
Display Mode Normally White
Response Time 5ms (TYP. ON/OFF)
Surface Treatment Anti-Glare, 3H
Lamp 2 LED lightbars
Outline Dimension 556.0(W) ×323.2(H) ×9.90(D)
A. When “Main OSD” displays, press these keys to change the contents of an adjustment
item, or change an adjustment value
[►], [◄]
B. When “Main OSD” un-displays, press [►] to show “Audio” OSD and increase the
volume, press [◄] to show “Audio” OSD and decrease the volume .
A. When “Main OSD” un-displays, press [MENU] to enter OSD interface.
[MENU] B. When “Main OSD” displays, press [MENU] to perform function of menu icon that is
highlight or enter next level menu.
Notes: (1) Clock default 50 is for Visa timing. Others depend on timing.
(2) Depend on timing & S/N
Acer Acer –LCD-S243HL
5.5 OSD Translation
OSD
Mode 寬螢幕模式 Vollbild Plein écran Completa Schermo intero 宽屏模式 ワイドモード
全螢幕 Vollbild Plein écran Completa Pieno 全屏 全画面
ct Aspect
輸入 Eingang Entrée Entrada Input 输入 入力
uage 語言 Sprache Langue Idioma Lingua 语言 言語
恢复出厂模
恢復出廠模式 Rücksetzen Restaurer Reiniciar Resetare リセット
式
ケーブルが接
Not 無訊號線 Leitung nicht Câble non Cable no Cavo non 信号线
続されて
ected 連接 angeschlossen connecté conectado connesso 无连接
いません
gnal 無訊號 Kein signal Pas de signal Sin señal Assenza segnale 无讯号 信号なし
Not Кабель не Leitung nicht Câble non Cable no Cavo non Kabel niet Kaapeli ei
ected подключен angeschlossen connecté conectado connesso aangesloten kiinni
6. Mechanical
6.1 Dimension
Dimension Spec
Width 569mm
Height 425mm(W/Base&O/BASE)
Depth 192mm(W/Base),122mm(W/O Base)
Monitor Weight 4.2±0.3Kg for AUO panel(AUO panel 2.2Kg)
Remark: If phase in other second panel, the Monitor weight =2.0Kg+second panel weight ±0.3Kg
6.2 Cabinet Material
Mechanical Spec
Bezel Gap Specification ≦1.2mm
Screen printed Parts NO
items Spec
Tilt Compliance with TCO03, -4°(+/-1°) ~+14°(+/-1°)
Wall Mount NO
Acer Acer –LCD-S243HL
7. Package
7.1 Unit Package Specification
7.1.1 Units package
Items Spec
Items Description
Sweep Frequency 1~200Hz
Amplitude 1.14 Grms
Duration Time 30 minute each axis
Direction 3 mutually perpendicular axes (x, y, z)
Item Description
Temperature -200C to 600C
25ºC>60ºC (10hrs)>25ºC (2hrs)>-20ºC (10hrs)>25ºC
Reset cycles times
3cycles ,every transition time 0.5 hr,
Total cycles 3 cycles
Drop height (Select drop height according to the gross weight refer to the table at below)
Gross Weight(kg) 1.0<W≦9.0
76
Drop Height(cm)
√
Mechanical and electrical damage should not exist after vibration test, and shall be submitted for approval customer before
mass production.
03 Exploded Diagram
3.1 LP2479(S243HL)_SCREW_LIST
No raster?
Yes
LED orange?
Yes
Backlight can’t
be turned on.
Yes
Is there 19V
No
voltage on pin23 Check adapter
of IC501,IC503
Yes
No R501open
Yes
No
Is Pin24 of IC501,IC503(VREF) 5V? Is IC501,IC503 ok?
No
L501,L502 fail
Is ok L501,L502?
Yes
White screen
YES
LVDS Cable
Workmanship
Reinsert
NO
YES
Change
LVDS cable NG
LVDSCable
NO
YES YES
Check VLCD Check LVDS
Panel Fail
is 5V signal
NO NO
NO
Check pin103 of
U106 fail
U106 is OK
YES
Check
Q102,Q103,Q104 and
R,C of Panel Enable
circuit
END
6. No volume with PC Audio Input
6. No volume with HDMI Input
05 Spare Parts List
ACER PART 82427972A120R
PARTNAME OEM PART NO DESCRIPTION
NO. CN
LED CABLE 50.LH60J.001 430302000300H HRN ASSY 2x10P To 1x20P 540mm UL3302#28
FFC CABLE 50.LH60J.002 430303002920H HRN ASS'Y LVDS 30P 625mm UL3302#28
Keypad CABLE 50.LH60J.003 430301000480H HRN ASS'Y 2X5P TO 1X9P 90mm UL3302#28
POWER CORD 27.LH60J.001 453070800820R PWRCORD 16A/250V BLK 1830mm VDE H05VV-F
S1: Take out the LCD TV panel S3: Assemble the panel with bezel
S2: Take out the bezel S4: Plug in the FFC cable and LED cable
LED cable
FFC cable
S5: Take out a chassis S7: Take out a main board
S6: Assemble the chassis and a guard. S8: Assemble the chassis and the
guard main board
S9: Use a screwdriver to lock the
screw S11: Use a screwdriver to lock the screws
3 4
1 2
screw
S10: Take out a shield and assemble the S12: Use 4 tapes to fix the FFC cable and
shield on the main board with a screw LED cable
locked.
shield
screw
3 1
4
S13: Assemble the back cover with the panel. S15: Use a screwdriver to lock the screws.
4 3 2 1
4 3
3
2
2
1
1
S14: Take out a stand back. Take the FFC cable S16: Take out a keypad cable and plug
and LED cable out of the hole of the stand. it in the stand.
S17: Use a screwdriver to lock the S19: Take the FFC cable, LED cable
screws to fix the speaker. and keypad cable out of the
corresponding hole.
S18: Take out a shelter to stick on the S20: Use a screwdriver to lock the
speaker. screws
1 2
3 4
S21: Plug the FFC cable, Keypad cable, S23: Use a screwdriver to lock the
Speaker cable and LED cable in the main board. screws
Speaker
FFC cable Keypad cable cable LED cable 1 2
3 4
S22: Assemble the chassis assembly S24: Take out a stand cover and
with stand. assemble it with the stand.
S25: Take out the left cover hinge and the right S27: Take two spacers to stick on
cover hinge. Assemble them and the stand. the chassis.
Base