Professional Documents
Culture Documents
BS en Iso Iec 17024-2012
BS en Iso Iec 17024-2012
Conformity assessment —
General requirements for
bodies operating
certification of persons
BS EN ISO/IEC 17024:2012 BRITISH STANDARD
National foreword
This British Standard is the UK implementation of
EN ISO/IEC 17024:2012. It supersedes BS EN ISO/IEC 17024:2003
which is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee CAS/1, Conformity assessment.
A list of organizations represented on this committee can be
obtained on request to its secretary.
This publication does not purport to include all the necessary
provisions of a contract. Users are responsible for its correct
application.
© The British Standards Institution 2012. Published by BSI Standards
Limited 2012
ISBN 978 0 580 78463 7
ICS 03.120.20
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 July 2012.
Amendments issued since publication
Date Text affected
EUROPEAN STANDARD EN ISO/IEC 17024
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2012
English version
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning
such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre
has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
© 2012 CEN/CENELEC All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/IEC 17024:2012 E
worldwide for CEN national Members and for CENELEC
Members.
BS EN ISO/IEC 17024:2012
EN ISO/IEC 17024:2012
Foreword
This document (EN ISO/IEC 17024:2012) has been prepared by Technical Committee ISO/CASCO
"Committee on conformity assessment" in collaboration with Technical Committee CEN/CLC/TC 1 “Criteria for
conformity assessment bodies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at
the latest by January 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO/IEC 17024:2012 has been approved by CEN as a EN ISO/IEC 17024:2012 without any
modification.
3
BS EN ISO/IEC 17024:2012
ISO/IEC 17024:2012(E)
Contents Page
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of conformity
assessment, the ISO Committee on conformity assessment (CASCO) is responsible for the development of
International Standards and Guides.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
Draft International Standards are circulated to the national bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 17024, was prepared by the ISO Committee on conformity assessment (CASCO).
It was circulated for voting to the national bodies of both ISO and IEC, and was approved by both
organizations.
This second edition cancels and replaces the first edition (ISO/IEC 17024:2003), which has been technically
revised.
Introduction
This International Standard has been developed with the objective of achieving and promoting a globally
accepted benchmark for organizations operating certification of persons. Certification for persons is one
means of providing assurance that the certified person meets the requirements of the certification scheme.
Confidence in the respective certification schemes for persons is achieved by means of a globally accepted
process of assessment and periodic re-assessments of the competence of certified persons.
However, it is necessary to distinguish between situations where certification schemes for persons are
justified and situations where other forms of qualification are more appropriate. The development of
certification schemes for persons, in response to the ever increasing velocity of technological innovation and
growing specialization of personnel, can compensate for variations in education and training and thus facilitate
the global job market. Alternatives to certification can still be necessary in positions where public services,
official or governmental operations are concerned.
In contrast to other types of conformity assessment bodies, such as management system certification bodies,
one of the characteristic functions of the certification body for persons is to conduct an examination, which
uses objective criteria to measure competence and scoring. While it is recognized that such an examination, if
well planned and structured by the certification body for persons, can substantially serve to ensure impartiality
of operations and reduce the risk of a conflict of interest, additional requirements have been included in this
International Standard.
In either case, this International Standard can serve as the basis for the recognition of the certification bodies
for persons and the certification schemes under which persons are certified, in order to facilitate their
acceptance at the national and international levels. Only the harmonization of the system for developing and
maintaining certification schemes for persons can establish the environment for mutual recognition and the
global exchange of personnel.
This International Standard specifies requirements which ensure that certification bodies for persons operating
certification schemes for persons operate in a consistent, comparable and reliable manner. The requirements
in this International Standard are considered to be general requirements for bodies providing certification of
persons. Certification of persons can only occur when there is a certification scheme. The certification scheme
is designed to supplement the requirements included in this International Standard and include those
requirements that the market needs or desires, or that are required by governments.
This International Standard can be used as a criteria document for accreditation or peer evaluation or
designation by governmental authorities, scheme owners and others.
1 Scope
This International Standard contains principles and requirements for a body certifying persons against specific
requirements, and includes the development and maintenance of a certification scheme for persons.
NOTE For the purposes of this International Standard, the term "certification body" is used in place of the full term
"certification body for persons", and the term "certification scheme" is used in place of the full term “certification scheme for
persons”.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
3.1
certification process
activities by which a certification body determines that a person fulfils certification requirements (3.3),
including application, assessment, decision on certification, recertification and use of certificates (3.5) and
logos/marks
3.2
certification scheme
competence (3.6) and other requirements related to specific occupational or skilled categories of persons
3.3
certification requirements
set of specified requirements, including requirements of the scheme to be fulfilled in order to establish or
maintain certification
3.4
scheme owner
organization responsible for developing and maintaining a certification scheme (3.2)
NOTE The organization can be the certification body itself, a governmental authority, or other.
3.5
certificate
document issued by a certification body under the provisions of this International Standard, indicating that the
named person has fulfilled the certification requirements (3.3)
3.6
competence
ability to apply knowledge and skills to achieve intended results
3.7
qualification
demonstrated education, training and work experience, where applicable
3.8
assessment
process that evaluates a person's fulfilment of the requirements of the certification scheme (3.2)
3.9
examination
mechanism that is part of the assessment (3.8) which measures a candidate's (3.14) competence (3.6) by
one or more means, such as written, oral, practical and observational, as defined in the certification scheme
(3.2)
3.10
examiner
person competent to conduct and score an examination (3.9), where the examination requires professional
judgement
3.11
invigilator
person authorized by the certification body who administers or supervises an examination (3.9), but does not
evaluate the competence (3.6) of the candidate (3.14)
NOTE Other terms for invigilator are proctor, test administrator, supervisor.
3.12
personnel
individuals, internal or external, of the certification body carrying out activities for the certification body
3.13
applicant
person who has submitted an application to be admitted into the certification process (3.1)
3.14
candidate
applicant (3.13) who has fulfilled specified prerequisites and has been admitted to the certification process
(3.1)
3.15
impartiality
presence of objectivity
NOTE 1 Objectivity means that conflicts of interest do not exist, or are resolved, so as not to adversely influence
subsequent activities of the certification body.
NOTE 2 Other terms that are useful in conveying the element of impartiality are: independence, freedom from conflict
of interests, freedom from bias, lack of prejudice, neutrality, fairness, open-mindedness, even-handedness, detachment,
balance.
3.16
fairness
equal opportunity for success provided to each candidate (3.14) in the certification process (3.1)
3.17
validity
evidence that the assessment (3.8) measures what it is intended to measure, as defined by the certification
scheme (3.2)
NOTE In this international Standard, validity is also used in its adjective form "valid".
3.18
reliability
indicator of the extent to which examination (3.9) scores are consistent across different examination times
and locations, different examination forms and different examiners (3.10)
3.19
appeal
request by applicant (3.13), candidate (3.14) or certified person for reconsideration of any decision made by
the certification body related to her/his desired certification status
3.20
complaint
expression of dissatisfaction, other than appeal (3.19), by any individual or organization to a certification body,
relating to the activities of that body or a certified person, where a response is expected
3.21
interested party
individual, group or organization affected by the performance of a certified person or the certification body
EXAMPLES Certified person; user of the services of the certified person; employer of the certified person; consumer;
governmental authority.
3.22
surveillance
periodic monitoring, during the periods of certification, of a certified person's performance to ensure continued
compliance with the certification scheme
4 General requirements
The certification body shall be a legal entity, or a defined part of a legal entity, such that it can be held legally
responsible for its certification activities. A governmental certification body is deemed to be a legal entity on
the basis of its governmental status.
The certification body shall be responsible for, shall retain authority for, and shall not delegate, its decisions
relating to certification, including the granting, maintaining, recertifying, expanding and reducing the scope of
the certification, and suspending or withdrawing the certification.
4.3.1 The certification body shall document its structure, policies and procedures to manage impartiality and
to ensure that the certification activities are undertaken impartially. The certification body shall have top
management commitment to impartiality in certification activities. The certification body shall have a statement
publicly accessible without request that it understands the importance of impartiality in carrying out its
certification activities, manages conflict of interest and ensures the objectivity of its certification activities.
4.3.2 The certification body shall act impartially in relation to its applicants, candidates and certified persons.
4.3.3 Policies and procedures for certification of persons shall be fair among all applicants, candidates and
certified persons.
4.3.4 Certification shall not be restricted on the grounds of undue financial or other limiting conditions, such
as membership of an association or group. The certification body shall not use procedures to unfairly impede
or inhibit access by applicants and candidates.
4.3.5 The certification body shall be responsible for the impartiality of its certification activities and shall not
allow commercial, financial or other pressures to compromise impartiality.
4.3.6 The certification body shall identify threats to its impartiality on an ongoing basis. This shall include
those threats that arise from its activities, from its related bodies, from its relationships, or from the
relationships of its personnel. However, such relationships do not necessarily present a body with a threat to
impartiality.
NOTE 1 A relationship that threatens the impartiality of the body can be based on ownership, governance,
management, personnel, shared resources, finances, contracts, marketing (including branding) and payment of a sales
commission or other inducement for the referral of new applicants, etc.
NOTE 3 A related body is one which is linked to the certification body by common ownership, in whole or part, and has
common members of the board of directors, contractual arrangements, common names, common staff, informal
understanding or other means, such that the related body has a vested interest in any certification decision or has a
potential ability to influence the process.
4.3.7 The certification body shall analyse, document and eliminate or minimize the potential conflict of
interests arising from its certification activities. The certification body shall document and be able to
demonstrate how it eliminates, minimizes or manages such threats. All potential sources of conflict of interest
that are identified, whether they arise from within the certification body, such as assigning responsibilities to
personnel, or from the activities of other persons, bodies or organizations, shall be covered.
4.3.8 Certification activities shall be structured and managed so as to safeguard impartiality. This shall
include balanced involvement of interested parties (see definition 3.21).
The certification body shall have the financial resources necessary for the operation of a certification process
and have adequate arrangements (e.g. insurance or reserves) to cover associated liabilities.
5 Structural requirements
5.1.1 The certification body activities shall be structured and managed so as to safeguard impartiality.
5.1.2 The certification body shall document its organizational structure, describing the duties,
responsibilities and authorities of management, certification personnel and any committee. When the
certification body is a defined part of a legal entity, documentation of the organizational structure shall include
the line of authority and the relationship to other parts within the same legal entity.
f) assessment activities;
h) contractual arrangements.
5.2.1 Completion of training may be a specified requirement of a certification scheme (see 8.3). The
recognition/approval of training by the certification body shall not compromise impartiality or reduce the
assessment and certification requirements.
5.2.2 The certification body shall provide information regarding education and training if they are used as
pre-requisites for being eligible for certification. However, the certification body shall not state or imply that
certification would be simpler, easier or less expensive if any specified education/training services are used.
5.2.3 Offering training and certification for persons within the same legal entity constitutes a threat to
impartiality. A certification body that is part of a legal entity offering training shall:
a) identify and document the associated threats to its impartiality on an ongoing basis: the body shall have a
documented process to demonstrate how it eliminates or minimizes those threats;
b) demonstrate that all processes performed by the certification body are independent of training to ensure
that confidentiality, information security and impartiality are not compromised;
c) not give the impression that the use of both services would provide any advantage to the applicant;
d) not require the candidates to complete the certification body's own education or training as an exclusive
prerequisite when alternative education or training with an equivalent outcome exists;
e) ensure that personnel do not serve as an examiner of a specific candidate they have trained for a period
of two years from the date of the conclusion of the training activities: this interval may be shortened if the
certification body demonstrates it does not compromise impartiality.
6 Resource requirements
6.1.1 The certification body shall manage and be responsible for the performance of all personnel involved
in the certification process.
6.1.2 The certification body shall have sufficient personnel available with the necessary competence to
perform certification functions relating to the type, range and volume of work performed.
6.1.3 The certification body shall define the competence requirements for personnel involved in the
certification process. Personnel shall have competence for their specific tasks and responsibilities.
6.1.4 The certification body shall provide its personnel with documented instructions describing their duties
and responsibilities. These instructions shall be kept up-to-date.
6.1.5 The certification body shall maintain up-to-date personnel records, including relevant information, e.g.
qualifications, training, experience, professional affiliations, professional status, competence and known
conflicts of interest.
6.1.6 Personnel acting on the certification body's behalf shall keep confidential all information obtained or
created during the performance of the body's certification activities, except as required by law or where
authorized by the applicant, candidate or certified person.
6.1.7 The certification body shall require its personnel to sign a document by which they commit themselves
to comply with the rules defined by the certification body, including those relating to confidentiality, impartiality
and conflict of interests.
NOTE Where permitted by law, other methods, including electronic signature, are acceptable.
6.1.8 When a certification body certifies a person it employs, the certification body shall adopt procedures to
maintain impartiality.
6.2.1 General
The certification body shall require its personnel to declare any potential conflict of interest in any candidate.
6.2.2.1 Examiners shall meet the requirements of the certification body. The selection and approval
processes shall ensure that examiners:
d) are fluent, both in writing and orally, in the language of examination; in circumstances where an
interpreter or a translator is used, the certification body shall have procedures in place to ensure that it
does not affect the validity of the examination;
e) have identified any known conflicts of interest to ensure impartial judgements are made.
6.2.2.2 The certification body shall monitor the performance of the examiners and the reliability of the
examiners' judgements. Where deficiencies are found, corrective actions shall be taken.
NOTE Monitoring procedures for examiners can include, for example, on-site observation, review of examiners'
reports, feedback from candidates.
6.2.2.3 If an examiner has a potential conflict of interest in the examination of a candidate, the
certification body shall undertake measures to ensure that the confidentiality and impartiality of the
examination are not compromised. These measures shall be recorded.
6.2.3.1 The certification body shall have a documented description of the responsibilities and
qualifications of other personnel involved in the assessment process (e.g. invigilators).
6.2.3.2 If other personnel involved in the assessment have a potential conflict of interest in the
examination of a candidate, the certification body shall undertake measures to ensure that confidentiality and
impartiality of the examination is not compromised. These measures shall be recorded.
6.3 Outsourcing
6.3.1 The certification body shall have a legally enforceable agreement covering the arrangements,
including confidentiality and conflict of interests, with each body that provides outsourced work related to the
certification process.
NOTE For the purposes of this International Standard, the terms “outsourcing” and “subcontracting” are considered
to be synonyms.
6.3.2 When a certification body outsources work related to certification, the certification body shall:
b) ensure that the body conducting outsourced work is competent and complies with the applicable
provisions of this International Standard;
c) assess and monitor the performance of the bodies conducting outsourced work in accordance with its
documented procedures;
d) have records to demonstrate that the bodies conducting outsourced work meet all requirements relevant
to the outsourced work;
The certification body shall use adequate premises, including examination sites, equipment and resources for
carrying out its certification activities.
7.1.1 The certification body shall maintain records. The records shall include a means to confirm the status
of a certified person. The records shall demonstrate that the certification or recertification process has been
effectively fulfilled, particularly with respect to application forms, assessment reports (which include
examination records) and other documents relating to granting, maintaining, recertifying, expanding and
reducing the scope, and suspending or withdrawing certification.
7.1.2 The records shall be identified, managed and disposed of in such a way as to ensure the integrity of
the process and the confidentiality of the information. The records shall be kept for an appropriate period of
time, for a minimum of one full certification cycle, or as required by recognition arrangements, contractual,
legal or other obligations.
7.1.3 The certification body shall have enforceable arrangements to require that the certified person informs
the certification body, without delay, of matters that can affect the capability of the certified person to continue
to fulfil the certification requirements.
7.2.1 The certification body shall verify and provide information, upon request, as to whether an individual
holds a current, valid certification and the scope of that certification, except where the law requires such
information not to be disclosed.
7.2.2 The certification body shall make publicly available without request information regarding the scope of
the certification scheme and a general description of the certification process.
7.2.3 All pre-requisites of the certification scheme shall be listed and the list shall be made publicly available
without request.
7.2.4 Information provided by the certification body, including advertising, shall be accurate and not
misleading.
7.3 Confidentiality
7.3.1 The certification body shall establish documented policies and procedures for the maintenance and
release of information.
7.3.2 The certification body shall, through legally enforceable agreements, keep confidential all information
obtained during the certification process. These agreements shall cover all personnel.
7.3.3 The certification body shall ensure that information obtained during the certification process, or from
sources other than the applicant, candidate or certified person, is not disclosed to an unauthorized party
without the written consent of the individual (applicant, candidate or certified person), except where the law
requires such information to be disclosed.
7.3.4 When the certification body is required by law to release confidential information, the person
concerned shall, unless prohibited by law, be notified as to what information will be provided.
7.3.5 The certification body shall ensure that the activities of related bodies do not compromise
confidentiality.
7.4 Security
7.4.1 The certification body shall develop and document policies and procedures necessary to ensure
security throughout the entire certification process and shall have measures in place to take corrective actions
when security breaches occur.
7.4.2 Security policies and procedures shall include provisions to ensure the security of examination
materials, taking into account the following:
a) the locations of the materials (e.g. transportation, electronic delivery, disposal, storage, examination
centre);
c) the steps in the examination process (e.g. development, administration, results reporting);
a) requiring candidates to sign a non-disclosure agreement or other agreement indicating their commitment
not to release confidential examination materials or participate in fraudulent test-taking practices;
d) implementing procedures to prevent any unauthorized aids from being brought into the examination area;
e) preventing candidates from gaining access to unauthorized aids during the examination;
8 Certification schemes
8.1 There shall be a certification scheme for each category of certification.
a) scope of certification;
c) required competence;
NOTE 1 Abilities can include physical capabilities such as vision, hearing and mobility.
NOTE 2 A code of conduct describes the ethical or personal behaviour required by the scheme.
8.3 A certification scheme shall include the following certification process requirements:
8.4 The certification body shall have documents to demonstrate that, in the development and review of the
certification scheme, the following are included:
b) the use of an appropriate structure that fairly represents the interests of all parties significantly concerned,
without any interest predominating;
c) the identification and alignment of prerequisites, if applicable, with the competence requirements;
d) the identification and alignment of the assessment mechanisms with the competence requirements;
NOTE Where the certification scheme has been developed by an entity other than the certification body, the job or
practice analysis might already be available as part of that work. In this case, the certification body can obtain details from
the scheme documentation for verification.
8.5 The certification body shall ensure that the certification scheme is reviewed and validated on an on-
going, systematic basis.
8.6 When the certification body is not the scheme owner of a certification scheme it implements, the
certification body shall ensure that the requirements contained in this clause (Clause 8) are met.
9.1.1 Upon application, the certification body shall make available an overview of the certification process in
accordance with the certification scheme. As a minimum, the overview shall include the requirements for
certification and its scope, a description of the assessment process, the applicant's rights, the duties of a
certified person and the fees.
9.1.2 The certification body shall require the completion of an application, signed by the applicant seeking
certification, which includes as a minimum the following:
a) information required to identify the applicant, such as name, address and other information required by
the certification scheme;
c) a statement that the applicant agrees to comply with the certification requirements and to supply any
information needed for the assessment;
d) any supporting information to demonstrate objectively compliance with the scheme prerequisites;
e) notice to the applicant of his/her opportunity to declare, within reason, a request for accommodation of
special needs (see 9.2.5).
NOTE Where permitted by law, other methods, including electronic signature, are acceptable.
9.1.3 The certification body shall review the application to confirm that the applicant complies with the
application requirements of the certification scheme.
9.2.1 The certification body shall implement the specific assessment methods and mechanisms as defined
in the certification scheme.
9.2.2 When there is a change in the certification scheme which requires additional assessment, the
certification body shall document and make publicly accessible without request the specific methods and
mechanisms required to verify that certified persons comply with changed requirements.
9.2.3 The assessment shall be planned and structured in a manner which ensures that the scheme
requirements are objectively and systematically verified with documented evidence to confirm the competence
of the candidate.
9.2.4 The certification body shall verify the methods for assessing candidates. This verification shall ensure
that each assessment is fair and valid.
9.2.5 The certification body shall verify and accommodate special needs, within reason and where the
integrity of the assessment is not violated, taking into account national regulation [see 9.1.2 e)].
9.2.6 Where the certification body takes into account work performed by another body, it shall have
appropriate reports, data and records to demonstrate that the results are equivalent to, and conform with, the
requirements established by the certification scheme.
9.3.1 Examinations shall be designed to assess competence based on, and consistent with, the scheme, by
written, oral, practical, observational or other reliable and objective means. The design of examination
requirements shall ensure the comparability of results of each single examination, both in content and difficulty,
including the validity of fail/pass decisions.
9.3.2 The certification body shall have procedures to ensure a consistent examination administration.
9.3.3 Criteria for conditions for administering examinations shall be established, documented and monitored.
NOTE Conditions can include lighting, temperature, separation of candidates, noise, candidate safety, etc.
9.3.4 When technical equipment is used in the examination process, the equipment shall be verified or
calibrated where appropriate.
9.3.5 Appropriate methodology and procedures (e.g. collecting and maintaining statistical data) shall be
documented and implemented in order to reaffirm, at justified defined intervals, the fairness, validity, reliability
and general performance of each examination, and that all identified deficiencies are corrected.
9.4.1 The information gathered during the certification process shall be sufficient:
9.4.2 Decisions for granting, maintaining, recertifying, extending, reducing, suspending or withdrawing
certification shall not be outsourced.
9.4.3 The certification body shall confine its decision on certification to those matters specifically related to
the requirements of the certification scheme.
9.4.4 The decision on certification of a candidate shall be made solely by the certification body on the basis
of the information gathered during the certification process. Personnel who make the decision on certification
shall not have participated in the examination or training of the candidate.
9.4.5 The personnel who make certification decisions shall have sufficient knowledge of and experience
with the certification process to determine if the certification requirements have been met.
9.4.6 Certification shall not be granted until all certification requirements are fulfilled.
9.4.7 The certification body shall provide a certificate to all certified persons. The certification body shall
maintain sole ownership of the certificates. The certificate shall take the form of a letter, card or other medium,
signed or authorized by a responsible member of the personnel of the certification body.
b) a unique identification;
d) a reference to the certification scheme, standard or other relevant documents, including issue date, if
relevant;
e) the scope of the certification including, if applicable, validity conditions and limitations;
9.5.1 The certification body shall have a policy and (a) documented procedure(s) for suspension or
withdrawal of the certification, or reduction of the scope of certification, which shall specify the subsequent
actions by the certification body.
9.5.2 Failure to resolve the issues that have resulted in the suspension, in a time established by the
certification body, shall result in withdrawal of the certification or reduction of the scope of certification.
9.5.3 The certification body shall have enforceable arrangements with the certified person to ensure that, in
the event of suspension of certification, the certified person refrains from further promotion of the certification
while it is suspended.
9.5.4 The certification body shall have enforceable arrangements with the certified person to ensure that, in
the event of withdrawal of certification, the certified person refrains from use of all references to a certified
status.
9.6.1 The certification body shall have (a) documented procedure(s) for implementation of the recertification
process, in accordance with the certification scheme requirements.
9.6.2 The certification body shall ensure during the recertification process that it confirms continued
competence of the certified person and ongoing compliance with current scheme requirements by the certified
person.
9.6.3 The recertification period shall be based upon the scheme requirements. The rationale for the
recertification period shall take into account, where relevant, the following:
a) regulatory requirements;
d) the nature and maturity of the industry or field in which the certified person is working;
9.6.4 The selected recertification activity/activities shall be adequate to ensure that there is impartial
assessment to confirm the continuing competence of the certified person.
9.6.5 In accordance with the certification scheme, recertification by the certification body shall consider at
least the following:
a) on-site assessment;
b) professional development;
c) structured interviews;
e) examination;
NOTE “Physical capability” can require an evaluation by a health professional, or by a professional qualified to
evaluate physical skills such as dexterity, strength and endurance, as well as the technical performance skills required for
the certification.
9.7.1 A certification body that provides a certification mark or logo shall document the conditions for use
and shall appropriately manage the rights for usage and representation.
9.7.2 The certification body shall require that a certified person signs an agreement for the following
reasons:
b) to make claims regarding certification only with respect to the scope for which certification has been
granted;
c) not to use the certification in such a manner as to bring the certification body into disrepute, and not to
make any statement regarding the certification which the certification body considers misleading or
unauthorized;
d) to discontinue the use of all claims to certification that contain any reference to the certification body or
certification upon suspension or withdrawal of certification, and to return any certificates issued by the
certification body;
NOTE Where permitted by law, other methods, including electronic signature, are acceptable.
9.7.3 A certification body shall address, by means of corrective measures, any misuse of its certification
mark or logo.
9.8.1 The certification body shall have a documented process to receive, evaluate and make decisions on
appeals. The appeals-handling process shall include at least the following elements and methods:
a) the process for receiving, validating and investigating the appeal, and for deciding what actions are to be
taken in response to it, taking into account the results of previous similar appeals;
c) ensuring that, if applicable, appropriate corrections and corrective actions are taken.
9.8.2 The policies and procedures shall ensure that all appeals are dealt with in a constructive, impartial
and timely manner.
9.8.3 A description of the appeals-handling process shall be publicly accessible without request.
9.8.4 The certification body shall be responsible for all decisions at all levels of the appeals-handling
process. The certification body shall ensure that the decision-making personnel engaged in the appeals-
handling process are different from those who were involved in the decision being appealed.
9.8.5 Submission, investigation and decision on appeals shall not result in any discriminatory actions
against the appellant.
9.8.6 The certification body shall acknowledge receipt of the appeal and shall provide the appellant with
progress reports and the outcome.
9.8.7 The certification body shall give formal notice to the appellant of the end of the appeals-handling
process.
9.9 Complaints
9.9.1 The certification body shall have a documented process to receive, evaluate and make decisions on
complaints.
9.9.2 A description of the complaints-handling process shall be accessible without request. The procedures
shall treat all parties fairly and equitably.
9.9.3 The policies and procedures shall ensure that all complaints are handled and processed in a
constructive, impartial and timely manner. The complaints-handling process shall include at least the following
elements and methods:
a) an outline of the process for receiving, validating, investigating the complaint and deciding what actions
are to be taken in response to it;
c) ensuring that, if applicable, appropriate corrections and corrective actions are taken.
9.9.4 Upon receipt of a complaint, the certification body shall confirm whether the complaint relates to
certification activities for which it is responsible and, if so, shall respond accordingly.
9.9.5 Whenever possible, the certification body shall acknowledge receipt of the complaint and shall provide
the complainant with progress reports and the outcome.
9.9.6 The certification body receiving the complaint shall be responsible for gathering and verifying all
necessary information to validate the complaint.
9.9.7 Whenever possible, the certification body shall give formal notice of the end of the complaints-
handling process to the complainant.
9.9.8 Any substantiated complaint about a certified person shall also be referred by the certification body to
the certified person in question at an appropriate time.
9.9.9 The complaints-handling process shall be subject to requirements for confidentiality, as it relates to
the complainant and to the subject of the complaint.
9.9.10 The decision to be communicated to the complainant shall be made by, or reviewed and approved by,
personnel not previously involved in the subject of the complaint.
10.1 General
The certification body shall establish, document, implement and maintain a management system that is
capable of supporting and demonstrating the consistent achievement of the requirements of this International
Standard. In addition to meeting the requirements of Clauses 4 to 9, the certification body shall implement a
management system in accordance with either option A or option B, as follows:
option B: a body that has established and maintains a management system, in accordance with the
requirements of ISO 9001, and that is capable of supporting and demonstrating the consistent fulfilment
of the requirements of this International Standard (ISO/IEC 17024), fulfils the management system
requirements of 10.2.
10.2.1 General
The certification body shall establish, document, implement and maintain a management system that is
capable of supporting and demonstrating the consistent achievement of the requirements of this International
Standard.
The certification body's top management shall establish and document policies and objectives for its activities.
The top management shall provide evidence of its commitment to the development and implementation of the
management system in accordance with the requirements of this International Standard. The top management
shall ensure that the policies are understood, implemented and maintained at all levels of the certification
body's organization.
The certification body's top management shall appoint a member of management who, irrespective of other
responsibilities, shall have responsibility and authority that include:
a) ensuring that processes and procedures needed for the management system are established,
implemented and maintained;
b) reporting to top management on the performance of the management system and any need for
improvement.
Applicable requirements of this International Standard shall be documented. The certification body shall
ensure that the management system documentation is provided to all relevant personnel.
The certification body shall establish procedures to control the documents (internal and external) that relate to
the fulfilment of this International Standard. The procedures shall define the controls needed to:
c) ensure that changes and the current revision status of documents are identified;
d) ensure that relevant versions of applicable documents are provided at points of use;
f) ensure that documents of external origin are identified and their distribution controlled;
g) prevent the unintended use of obsolete documents and apply suitable identification if they are retained for
any purpose.
The certification body shall establish procedures to define the controls needed for the identification, storage,
protection, retrieval, retention time and disposition of its records related to the fulfilment of this International
Standard.
The certification body shall establish procedures for retaining records for a period consistent with its
contractual and legal obligations. Access to these records shall be consistent with the confidentiality
arrangements.
NOTE For requirements for records on applicants, candidates and certified persons, see also 7.1.
10.2.5.1 General
The certification body's top management shall establish procedures to review its management system at
planned intervals, in order to ensure its continuing suitability, adequacy and effectiveness, including the stated
policies and objectives related to the fulfilment of this International Standard. These reviews shall be
conducted at least once every 12 months and shall be documented.
The input to the management review shall include information related to the following:
b) feedback from applicants, candidates, certified persons and interested parties related to the fulfilment of
this International Standard;
c) safeguarding impartiality;
The output from the management review shall include as a minimum decisions and actions related to the
following:
b) improvement of the certification services related to the fulfilment of this International Standard;
c) resource needs.
10.2.6.1 The certification body shall establish procedures for internal audits to verify that it fulfils the
requirements of this International Standard and that the management system is effectively implemented and
maintained.
10.2.6.2 An audit programme shall be planned, taking into consideration the importance of the processes
and areas to be audited, as well as the results of previous audits.
10.2.6.3 Internal audits shall be performed at least once every 12 months. The frequency of internal audits
may be reduced if the certification body demonstrates that its management system continues to be effectively
implemented in accordance with this International Standard and has proven stability.
a) internal audits are conducted by competent personnel, knowledgeable in the certification process,
auditing and the requirements of this International Standard;
c) personnel responsible for the area audited are informed of the outcome of the audit;
d) any actions resulting from internal audits are taken in a timely and appropriate manner;
The certification body shall establish (a) procedure(s) for identification and management of nonconformities in
its operations. The certification body shall also, where necessary, take actions to eliminate the causes of
nonconformities in order to prevent recurrence. Corrective actions shall be appropriate to the impact of the
problems encountered. The procedures shall define requirements for the following:
a) identifying nonconformities;
c) correcting nonconformities;
d) evaluating the need for actions to ensure that nonconformities do not recur;
The certification body shall establish (a) procedure(s) for taking preventive actions to eliminate the causes of
potential nonconformities. Preventive actions taken shall be appropriate to the probable impact of the potential
problems. The procedures for preventive actions shall define requirements for the following:
NOTE The procedures for corrective and preventive actions do not necessarily have to be separate.
Annex A
(informative)
A.1 General
A.1.1 This International Standard does not give specific requirements for all situations that can occur. These
principles should be applied as guidance for the decisions that may need to be taken for unanticipated
situations. Principles are not requirements.
A.1.2 The overall purpose of certification of persons is to recognize an individual's competence to perform a
task or job.
A.1.3 The certification body has a responsibility to ensure that only those persons who demonstrate
competence are awarded certification.
A.1.4 Certification of persons provides value through public confidence and trust. Public confidence relies
on a valid assessment of competence, by a third party, reconfirmed at defined intervals.
A.1.5 The certification body should act in a responsible manner so as to provide confidence to interested
parties in its competence, impartiality and integrity.
A.2 Impartiality
A.2.1 Certification of a person should be based on objective evidence obtained by the certification body
through a fair, valid and reliable assessment, and not influenced by other interests or by other parties.
A.2.2 It is necessary for certification bodies and their personnel to be and to be perceived to be impartial in
order to give confidence in their activities and their outcomes.
A.2.3 Threats to impartiality include, but are not limited to, the following:
a) self-interest threats: threats that arise from a person or body acting in its own interest to benefit itself;
b) subjectivity threats: threats that arise when personal bias overrules objective evidence;
c) familiarity threats: threats that arise from a person being familiar with or trusting of another person, e.g. an
examiner or certification body personnel developing a relationship with a candidate that affects the ability
to reach an objective judgement;
d) intimidation threats: threats that prevent a certification body or its personnel from acting objectively due to
fear of a candidate or other interested party;
e) financial threats: the source of revenue for a certification body can be a threat to impartiality.
A.3 Competence
Competence of the personnel of the certification body is necessary to deliver certification that provides
confidence.
A.6 Responsibility
The certification body has the responsibility to obtain sufficient objective evidence upon which to base a
certification decision.
Bibliography
[3] ISO/IEC 17030, Conformity assessment — General requirements for third-party marks of conformity
About us Revisions
We bring together business, industry, government, consumers, innovators Our British Standards and other publications are updated by amendment or revision.
and others to shape their combined experience and expertise into standards We continually improve the quality of our products and services to benefit your
-based solutions. business. If you find an inaccuracy or ambiguity within a British Standard or other
The knowledge embodied in our standards has been carefully assembled in BSI publication please inform the Knowledge Centre.
a dependable format and refined through our open consultation process.
Organizations of all sizes and across all sectors choose standards to help Copyright
them achieve their goals. All the data, software and documentation set out in all British Standards and
other BSI publications are the property of and copyrighted by BSI, or some person
Information on standards or entity that owns copyright in the information used (such as the international
We can provide you with the knowledge that your organization needs standardization bodies) and has formally licensed such information to BSI for
to succeed. Find out more about British Standards by visiting our website at commercial publication and use. Except as permitted under the Copyright, Designs
bsigroup.com/standards or contacting our Customer Services team or and Patents Act 1988 no extract may be reproduced, stored in a retrieval system
Knowledge Centre. or transmitted in any form or by any means – electronic, photocopying, recording
or otherwise – without prior written permission from BSI. Details and advice can
Buying standards be obtained from the Copyright & Licensing Department.
You can buy and download PDF versions of BSI publications, including British
and adopted European and international standards, through our website at Useful Contacts:
bsigroup.com/shop, where hard copies can also be purchased. Customer Services
If you need international and foreign standards from other Standards Development Tel: +44 845 086 9001
Organizations, hard copies can be ordered from our Customer Services team. Email (orders): [email protected]
Email (enquiries): [email protected]
Subscriptions
Subscriptions
Our range of subscription services are designed to make using standards
Tel: +44 845 086 9001
easier for you. For further information on our subscription products go to
Email: [email protected]
bsigroup.com/subscriptions.
With British Standards Online (BSOL) you’ll have instant access to over 55,000 Knowledge Centre
British and adopted European and international standards from your desktop. Tel: +44 20 8996 7004
It’s available 24/7 and is refreshed daily so you’ll always be up to date. Email: [email protected]
You can keep in touch with standards developments and receive substantial
Copyright & Licensing
discounts on the purchase price of standards, both in single copy and subscription
format, by becoming a BSI Subscribing Member. Tel: +44 20 8996 7070
Email: [email protected]
PLUS is an updating service exclusive to BSI Subscribing Members. You will
automatically receive the latest hard copy of your standards when they’re
revised or replaced.
To find out more about becoming a BSI Subscribing Member and the benefits
of membership, please visit bsigroup.com/shop.
With a Multi-User Network Licence (MUNL) you are able to host standards
publications on your intranet. Licences can cover as few or as many users as you
wish. With updates supplied as soon as they’re available, you can be sure your
documentation is current. For further information, email [email protected].