1

Location: ∠PLC∠Product Information∠APB PLC

APB Series PLC

Features:

Main module: 12\22\24 points; Extension module: 22

points; It

is flexible for extending, and the optimal max. configuratio

I/O

extension modules, 1 voice module, and 1 SMS module;

Program memory capacity: 320 FBDs, EEPROM;

It is allowed to place a Li-ion battery to power the cloc

Under the circumstance of DC12-24V, the main machin

most has 12 voltage analog inputs 0-10V, 2 current analog

inputs

4-20mA and 2 analog outputs 4-20mA;

High-speed operation: at most 4 high-speed inputs 10

and

2 high-speed outputs 10KHZ;

MODBUS protocol, and can be connected to SH-300 (T

Panel);

New function blocks: pulse width modulation (PWM),

 2

output (PTO), ACC, SMS and analog calculation etc.;

Technical Parameters

Item APB-12MRD(L)

Surge Immunity 2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5)

Electrostatic
Discharge ±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5)
(outer casing)

Ambient
-10℃～+55℃
Temperature

Storage
-40℃～+70℃
Temperature

Ambient
5%～95%RH
Humidity

Degree of
IP20(Non-waterproof)
Protection

Installation Fixing with M3 screws or Standard DIN rail mounting

Dimensions
71*99*58.5(12 points)；126*99*58.5(22 points)；126*99*58.5(24 points)
(mm)

Programming
FBD
Language

Points 12 points/22 points/24 points/can support 7 I/O extension modules

Memory
320 FBDs
Capacity

Filtering
Duration of It can be set to improve the stability of signal
Input Signal

Real-time Clock 160h,can place a Li-ion battery if it is necessary

Password
Multiple passwords protection
Protection
 3

High-speed
At most 4 high-speed inputs 10KHz, and 2 high-speed outputs 10KHz
Operation

Analog At most 12 voltage 0-10V and 2 current 4-20mA analog inputs, and 2 analog outputs 0
Operation 20mA

Power Failure
Yes
Protection

Simulate
Yes
Monitoring

Communication
TTL interface; besides, communication module supports 2 RS485 and 1 RS232 interfac
Interface

Baud Rate 9600bps

Communication
MODBUS RTU
Protocol

Power Supply

Rated Voltage DC12-24V DC12-24V DC12-24V AC110-220V DC12-24V

Permissible DC11-28V DC11-28V DC11-28V AC85V-265V DC11-28V

Range

Power 3.5w -- -- -- --
Consumption

Digital Input

Input Type NPN/PNP NPN/PNP NPN/PNP NPN/PNP NPN/PNP

Input Signal 0 DC0-5V DC0-5V DC0-5V AC0-70V DC0-5V

Input Signal 1 DC8.5-28V DC8.5-28V DC8.5-28V AC85-265V DC8.5-28V

Isolation Non-isolation Non-isolation Non-isolation Photoelectric Non-isolatio

isolation

Isolated Group -- -- -- 14 --

Isolated Voltage -- -- -- 2500/5000Vr.m.s --

Digital Output

Output Type Relay Transistor(NPN) Transistor(PNP) Relay Relay

Rated Voltage 24VDC/220VAC 24VDC 24VDC 24VDC/220VAC 24VDC/220V

 4

Isolation Relay isolation - - Relay isolation Relay isolati

Method

Analog Input

Input Type (DC0-10V)/8 inputs (DC0-10V)/8 (DC0-10V)/8 -- (4-20mA)/2

inputs inputs inputs

(DC0-10V)/12 (DC0-10V)/12 (DC0-10V)/12 (DC0-10V)/1

inputs inputs inputs inputs

Analog Output

Output Type -- -- -- -- 4-20mA/2in

A/D Conversion -- -- -- -- 12 bits

Isolation Non-isolation Non-isolation Non-isolation Non-isolation Non-isolatio

High-speed Operation

4 inputs /10KHz 4 inputs /10KHz 4 inputs /10KHz -- 4 inputs /10

Input Type Support single- Support sing

Support single- Support single-
phase counter and phase count
phase counter and phase counter and --
two-phase and two-pha
two-phase counter two-phase counter
counter counter

2 outputs / 10KHZ 2 outputs /10KHZ

Output Type Supports multiple Supports multiple

outputs: PTO outputs: PTO
pulse output, pulse output,
PWM pulse width PWM pulse width
-- -- --
modulation and modulation and
acceleration/ acceleration/
deceleration deceleration
single-phase pulse single-phase pulse

Type

Note: The economical type is supplied without LCD panel, and the basic type is supplied with LCD panel.

8 points digital input (can be

APB-12MRD(L) DC12V-24V used as analog inputs); I4-I7 4 points relay output
can be high-speed ports

APB-12MTD(L) DC12V-24V 8 points digital input (can be 4 points NPN transistor output
used as analog inputs); I4-I7
 5

can be high-speed ports Q2、Q3 can be high-speed output port

8 points digital input (can be 4 points PNP transistor output

APB-12MGD(L) DC12V-24V used as analog inputs); I4-I7
can be high-speed ports Q2、Q3 can be high-speed output port

APB-22MRA(L) AC100V-240V 14 points input 8 points relay output

14 points digital input (the first 8 points relay output

APB-22MRD(L) DC12V-24V 12 points can be analog inputs);
I4-I7 can be high-speed ports

14 points digital input (the first 8 points NPN transistor output

APB-22MTD(L) DC12V-24V 12 points can be analog inputs);
I4-I7 can be high-speed ports Q2、Q3 can be high-speed output port

14 points digital input (the first 8 points PNP transistor output

APB-22MGD(L) DC12V-24V 12 points can be analog inputs);
I4-I7 can be high-speed ports Q2、Q3 can be high-speed output port

2points for current input, and

14points for digital input (the
APB-24MRDL DC12V-24V first 12 points can be 0~10V 6 points relay output + 2 analog outputs
analog inputs); I4-I7 can be
high-speed ports

APB-22ERA AC100V-240V 14 points digital input 8 points relay output

APB-22ERD DC12V-24V 14 points digital input 8 points relay output

APB-22ETD DC12V-24V 14 points digital input 8 point NPN transistor output

APB-22EGD DC12V-24V 14 points digital input 8 point NPN transistor output

Auxiliary Module

APB-SMS supports I/O control and SMS alarm, as well as receives and sends short message in anot
mode

APB-EXPMC applied in the long-distance signal transmission interface and constitutes a nerwork with
485 bus

APB-EXNET use cable network and TCP/IP protocol to link the remote network

Dimensions
 6

Take the 12 points module as an example. The 12 points, 22 points, and 24 points modules and other
extension modules share the same width and height, the only one difference exists in the length.

Type Dimensions(mm

12 points main 71*99*58.5

module

22 points main 126*99*58.5

module

24 points main 126*99*58.5

module

I/O extension 126*99*58.5

module

SMS extension 126*90*47.5

module
7