● ●

GEODREN PEIT - technical values

Nonwoven geotextile made by polyester, needlepunched and calandered, produced without using of any glues or chemical binders.

Physical properties Standards Units Tolerance

Weight ρA [EN ISO 9864] g/m2 150 200 300 400 500 700 800 1000 1200 1500 +/- 10%
2 kPa d [EN ISO 9863-1] mm 1,00 1,20 1,40 1,80 2,40 3,50 4,00 4,50 5,00 6,00 +/- 20%
Thickness 20 kPa d [EN ISO 9863-1] mm 0,80 1,00 1,20 1,60 2,00 2,30 2,40 2,80 3,20 3,50 +/- 20%
200 kPa d [EN ISO 9863-1] mm 0,40 0,60 0,80 1,20 1,40 1,50 1,50 1,60 1,70 1,80 +/- 20%
Mechanical properties
Tensile strength MD T max [EN ISO 10319] kN/m 1,5 2,0 3,2 5,5 6,0 7,5 8,0 12,0 16,0 25,0 - 10%
CMD T max [EN ISO 10319] kN/m 2,0 2,5 3,8 7,5 9,0 11,0 12,0 14,0 20,0 30,0 - 10%
Elongation at maximum load MD ε max [EN ISO 10319] % 60,0 60,0 60,0 60,0 70,0 70,0 80,0 80,0 80 80 +/- 30%
CMD ε max [EN ISO 10319] % 70,0 70,0 70,0 70,0 80,0 90,0 90,0 90,0 90 90 +/- 30%
Energy index [EN ISO 10318] kJ/m2 0,6 0,7 1,1 2,1 2,8 3,7 4,3 5,5 7,7 11,7 +/- 20%
Static puncture resistance (CBR test) Fp [EN ISO 12236] kN 0,3 0,4 0,8 1,0 1,4 1,8 1,9 2,2 3,8 5,5 - 10%
Dynamic puncture resistance Dc [EN ISO 13433] mm >50 40,0 30,0 20,0 10,0 6,0 4,0 2,0 1 + 20%
Pyramid puncture resistance [EN 14574] N N.A. N.A. N.A. 250 300 450 500 600 700 800 - 20%
Grab resistance MD [ASTM D 4632] N 150 200 380 470 560 720 800 950 1100 1250 - 15%
CMD [ASTM D 4632] N 170 220 420 530 620 760 820 970 1150 1350 - 15%
Grab elongation MD [ASTM D 4632] % 70 70 70 70 70 70 70 70 70 70 +/- 20%
CMD [ASTM D 4632] % 80 80 80 80 80 80 80 80 80 80 +/- 20%
Trapezoid tearing strength MD [ASTM D 4533] N 80 90 150 170 200 270 300 350 400 450 - 20%
CMD [ASTM D 4533] N 90 100 170 230 260 320 360 410 460 510 - 20%
Hydraulic properties
Velocity index v-index [EN ISO 11058] mm/s 95 80 60 40 40 40 40 20 20 20 - 30%
Permeability normal to the plane [EN ISO 11058] l/m2 s 95 80 60 40 40 40 40 20 20 20 - 30%
Permettivity Ψ [EN ISO 10318] s-1 1,90 1,60 1,20 0,80 0,80 0,80 0,80 0,40 0,40 0,40
Coefficient of permeability normal to the the plane kn [EN ISO 10318] m/s 1,90 1,92 1,68 1,44 1,92 2,80 3,20 1,80 2,00 2,40
Hydraulic gradient i [EN ISO 10318] - 50 42 36 28 21 14 13 11 10 8
Characteristic opening size O 90 [EN ISO 12956] µm 65 60 55 45 45 45 45 40 40 40 +/- 30%
Durability properties
Resistance to weathering [EN 12224] To be covered within 1 day from the day of installation.
Hydrolysis resistance [EN ISO 12447] Forecast minimum durability of 5 years for all non-reinforcement application in natural ground with 4<pH<9 and soil temperature < 25°C.
The values given are an average obtained in our laboratories and in official testing institutes.
The confidence level is 95%
The right is reserved to make changes any time without notice.

Sheet code: 003 004 006 007 008 274 184 185 144 186
Rev. N.: 001 001 001 001 001 001 001 001 001 001
Date of Rev.: 05/05/09 05/05/09 05/05/09 05/05/09 05/05/09 05/05/09 05/05/09 05/05/09 05/05/09 05/05/09