Professional Documents
Culture Documents
(AHU) Clivet AHU and Modular Air Handling Unit
(AHU) Clivet AHU and Modular Air Handling Unit
Jakarta Branch Jl. Anggrek Neli Murni IIA Block C 12A, Kemanggisan-Slipi,
Jakarta Barat-Indonesia T. +62 (21) 548 2941 F. +62 (21) 548 2941
e. jktoffi[email protected]
CLIVET SPA
Via Camp Lonc 25, Z.I. Villapaiera - 32032 Feltre (BL) - Italy
Tel. + 39 0439 3131 - Fax + 39 0439 313300 - [email protected]
CLIVET RUSSIA
Elektrozavodskaya st. 24, office 509 - 107023, Moscow, Russia
Tel. + 74956462009 - Fax + 74956462009 - [email protected]
to ensure sustainable comfort and the well-being of people and the environment.
Designing and developing year-round air conditioning solu- commercial and industrial
comfort and the tions with innovative technologies are part of Clivet's DNA,
which means the company has always been ready for the sectors
well-being of people and future.
the environment
01 02
Air Handling Unit
Suspended AHU
2,000m3/h ~ 15,000 m3/h
(1,200CFM ~ 8,800CFM)
Horizontal AHU
Contents
5,000m3/h ~ 35,000 m3/h
(3,000CFM ~ 21,000CFM)
Vertical AHU
3,000m3/h ~ 30,000 m3/h 05 Air Handling Unit
(1,800CFM ~ 18,000CFM)
21 Modular Air Handling Unit
47 Installation
50 Reference Projects
03 04
Nomenclature
CKS 05 W 4 Y C-H
the requirements of all kinds of space cooling and heating, such as office buildings, shopping malls, exhibition halls, airports, Unit Structure
W: Horizontal;
L: Vertical;
railway stations, hotels, factories and any other central air-conditioning systems. D: Suspended
Clivet AHUs have been widely used in most part of the world for a couple of years. Now, the 3rd generation AHU has been Air Flow Rate, x1,000m3/h
Clivet Air Handling Unit
launched to provide you with more comfortable and convenient environment. It uses unitary structure design, more outstanding
cold-bridge free performance, lower air leakage and more elegant appearance. There are 3 types - suspended type, horizontal
type and vertical type, including 60 standard models, and the air flow rate is available from 2,000m3/h to 35,000m3/h. Different Orientation Air inlet
external static pressure (ESP) can be customized to meet different kinds of applications. Unit handling orientation is determined by location of pipe connection
while facing unit in the direction of air flow. The unit below is left-handed
connection unit, otherwise is right-handed connection unit.
Air outlet
Left-handed unit
05 06
Features Stable air supply fan assembly Low noise design
High strength, high reliability Yilida brand centrifugal fan, high performance efficiency, Optimal fan selection, excellent working condition,
3-phase, class "F" insulation and IP54 protection AC motor. efficient operation.
Panels are double-skin with injection of high density polyurethane. The external panel is anti-corrosion color-coated steel sheet, Belt drive, optimal selection of drive ratio, increase fan/motor Flexible connection at air outlet, minimizes vibration
the internal liner is galvanized steel sheet or aluminum sheet. The unit cabinet consists of panels attaching to each other by assembly efficiency, easy for maintenance. transmision.
combining with male and female aluminum alloy cards, and sealing strip tighten with concealed bolts. Service door or service panel is equipped for inspection of Equip with shock absorbers, decreases vibration, low
motor and fan. noise. Tighten cabinet, secure against noise leakage.
Wide usage
Air flow rate ranging from 2,000m3/h to 35,000m3/h;
Three structure design: horizontal type, vertical type and suspended type;
Two pipe connecting mode: right-handed and left handed;
Different ESP can be customized.
07 08
Mechanical specifications Fan and motor assembly
The fan is made of high grade hot galvanized steel sheet. It is designed to a special configuration according to aerodynamics. It is
Base frame coated in order to be anti-corrosive. Fan connection is isolated from
Unit sections are mounted on galvanized steel or angle steel base frame for easy shipment and handling. The galvanized steel unit casing by a flexible canvas duct mounted at fan discharge outlet.
frames provide holes for section connection, and holes for fork-lift truck. And the angle steel base frame is mounted on four Fan and motor assembly is internally isolated from unit casing with
wooden pallets of the four corners of base frame. However, for high static pressure application, because of drain pan’s U-trap, rubber pad, furnished and installed in the factory.
additional concrete plinths or other additional bases are required at site to raise the AHU. Motors are mounted on slide rails with provision for V-belt
tensioning. Motor can be moved freely in four directions to reach the
correct point. Installation and maintenance of motor, belt and pulley
Double skin panel are time saving jobs. Fan and motor assembly is mounted on a rigid
base frame which is supported by effective rubber shock absorber.
Standard panels are 25mm thickness double skin type with polyurethane foam insulation
Discharge fan is provided with a fire retardant flexible connection.
foamed under highly pressure. The external panel is anti-corrosion color-coated steel sheet
with a layer of film and the internal liner is galvanized steel sheet. The panel insulation is
moisture proof and anti-corrosive. The insulation material is totally enclosed in the panel to
avoid any possibility of insulation being exposed to air stream. Fan and motor assembly
Access panel
Coil
Coil is consisted of copper tubes and aluminum fins. The fins are sine-wave design with slits for better heat transfer efficiency and Access panel is double skins with polyurethane foam insulation
moisture carry-over limit performance. foamed under highly pressure. The external panel is anti-corrosion
Coil is mounted over a drain pan. The coil resets on U-shape supporter locating over the drain pan. The drain pan extends beyond coated steel sheet, the internal liner is galvanized steel sheet or Al
the leaving side of the coil to recover the condensate water. Coil connections always extend through out of the unit cabinet, sheet. The polyurethane foam insulation is heat resistance and
allowing for easy connection of valves and piping. Air discharge valve is on the top of water outlet pipe and is located outside the totally enclosed. 2 or 4 bolts are used to fixed the access panel,
cabinet. convenient for installation and maintenance. A durable rubber
seal is around the panel’s frame and a 10mm thick insulation seal
is sticked around the back side frame of the panel to prevent air
leakage.
Drain pan Inside Outside
Standard drain pan is painted to prevent rust and corrosion. 10mm insulation is provided between the drain pan and the bottom
panel. Stainless steel drain pan is optional. Air dampers
Air dampers in AHUs are optional. Aerodynamically designed damper
Filter blades have built in high quality bearings. Blade edges are lined with
sealing strip to restrict leakage to an absolute minimum. Air damper
Filter is aluminum alloy frame structure. Primary efficiency plate type filter blades are either linked to give parallel turning operation or gear set to
is designed as standard. The structure of filters are stable and firm, high give opposing direction. The dampers are tested to yield linear control
strength and intensity, washable and easy changing. Filter can be characteristic.
unloaded and loaded from both left and right side.
09 10
Specifications
Suspended type Horizontal type
Return air condition Return air condition
Rated Rated Water External Rated Rated Water External
Water flow Motor Chilled Cooling Power Water flow Motor Chilled Cooling Power
Model Air volume cooling heatling pressure static Sound level Driven type cooling heating pressure static
rate power water pipe water pipe supply Model Air volume rate power water pipe water pipe Sound level supply
capacity capacity drop pressure capacity capacity drop pressure
CKSxxY(Z)/C-H m3/h kW kW L/s kPa kW DN DN Pa dB(A) \ \
CKSxxY(Z)/C-H m3/h kW kW L/s kPa kW DN DN Pa dB(A) \
4 9.8 20.6 0.5 11.0 0.32 32 25 Direct
02D 2000 80 55
6 13.0 24.1 0.6 26.0 0.32 32 25 driven 4 26.8 53.3 1.3 38.9 1.1 32 25
05W 5000 220 61
4 14.9 30.6 0.7 31.0 0.75 32 25 6 33.4 61.0 1.6 30.3 1.5 32 25
03D 3000 160 59
6 19.2 35.4 0.9 24.0 0.75 32 25 4 33.1 64.6 1.6 59.5 1.5 40 25
4 20.5 40.7 1.0 60.0 1.1 40 25 06W 6000 220 62
04D 4000 200 60 6 40.7 73.5 1.9 40.3 2.2 40 25
6 25.7 46.9 1.2 49.5 1.1 40 25
4 43.6 85.3 2.1 38.5 2.2 50 25
4 25.3 50.9 1.3 40.0 1.5 40 25 08W 8000 220 64
05D 5000 200 62 6 55.3 98.0 2.6 74.7 2.2 50 25
6 31.0 58.4 1.5 32.0 1.5 40 25
4 30.3 60.4 1.5 43.8 1.5 40 25 4 58.9 110.5 2.8 50.6 3.0 50 25
06D 6000 200 63 10W 10500 270 66
6 37.1 70.0 1.8 44.0 2.2 40 25 6 69.3 128.7 3.3 48.8 3.0 50 25
4 34.8 69.6 1.7 58.0 2.2 40 25 380V, 3N~, 380V, 3N~,
07D 7000 240 64 4 82.1 161.5 3.9 49.1 4.0 65 32
6 42.2 80.9 2.0 59.0 2.2 50 25 50HZ 15W 15000 270 68 50HZ
Belt driven 6 103.5 183.0 4.9 38.0 5.5 65 32
4 40.4 80.5 1.9 26.0 2.2 40 25
08D 8000 240 64 4 116.9 235.5 5.6 36.3 7.5 65 32
6 49.2 93.4 2.4 56.0 3.0 50 25 21W 21000 320 70
4 45.0 90.1 2.2 34.0 3.0 40 25 6 150.1 264.3 7.2 26.4 7.5 65 32
09D 9000 280 66
6 60.5 103.0 2.9 25.4 3.0 50 25 4 136.2 271.8 6.5 53.4 11.0 65 32
24W 24000 420 71
4 52.2 104.4 2.5 51.0 3.0 50 25 6 174.4 303.4 8.3 37.7 11.0 65 32
10D 10500 280 67
6 71.5 121.3 3.4 35.8 4.0 50 25
4 170.3 339.8 8.1 56.8 11.0 65 32
4 56.7 121.2 2.7 54.0 4.0 50 25 30W 30000 420 73
12D 12000 280 68 6 218.0 379.2 10.4 39.8 15.0 65 32
6 79.6 135.4 3.8 41.6 4.0 50 25
4 73.3 147.5 3.5 38.1 5.5 50 32 4 202.5 398.4 9.7 85.6 15.0 80 32
15D 15000 320 69 35W 35000 520 73.5
6 100.7 171.7 4.8 34.3 5.5 65 32 6 258.4 444.4 12.3 61.6 15.0 80 32
1.Cooling capacity is based in the following condition 1.Cooling capacity is based in the following
a)Water temperature: 7˚C(inlet)/12˚C(outlet) b)Air entering condition: 27˚C DB/19.5˚C WB a)Water temperature: 7˚C(inlet)/12˚C(outlet) b)Air entering condition: 27˚C DB/19.5˚C WB
2.Heating capacity is based on the following condition 2.Heating capacity is based on the following
a)Water temperature: 60˚C(inlet) /50˚C(outlet) b)Air entering condition: 15˚C DB a)Water temperature: 60˚C(inlet) /50˚C(outlet) b)Air entering condition: 15˚C DB
Fresh air condition (Customizable) Fresh air condition (Customizable)
Rated Rated Water External Rated Rated Water External
cooling heatling Water flow pressu Motor Chilled Cooling static Power Water flow Motor Chilled Cooling Power
Model Air volume rate power water pipe water pipe Sound level supply Driven type Model cooling heating pressure static
capacity capacity redrop pressure Air volume rate power water pipe water pipe Sound level supply
capacity capacity drop pressure
CKSxxY(Z)/C-H m3/h kW kW L/s kPa kW DN DN Pa dB(A) \ \
CKSxxY(Z)/C-H m3/h kW kW L/s kPa kW DN DN Pa dB(A) \
4 24.3 25.6 1.2 43.0 0.32 32 25 Direct
02D 2000 80 55 4 62.7 66.8 3 64.3 1.1 50 25
6 28.5 29.2 1.4 31.4 0.32 32 25 driven
05W 5000 220 61
4 36.2 37.5 1.7 48.0 0.75 40 25 6 72.7 76.0 3.5 53.5 1.5 50 25
03D 3000 160 59
6 42.2 41.3 2.0 33.0 0.75 40 25 4 75.2 80.2 3.6 78.3 1.5 50 25
4 45.4 48.9 2.2 32.0 1.1 40 25 06W 6000 220 62
04D 4000 200 60 6 88.7 91.2 4.2 74.9 2.2 50 25
6 58.3 57.2 2.8 65.5 1.1 50 25
4 96.6 104.8 4.6 57.7 2.2 65 25
4 58.9 61.8 2.8 63.0 1.5 50 25 08W 8000 220 64
05D 5000 200 62 6 117.7 121.1 5.6 42.8 2.2 65 25
6 71.7 66.9 3.4 41.0 1.5 50 25
4 65.0 70.8 3.1 11.0 1.5 50 25 4 132.6 140.3 6.3 88.6 3.0 65 25
06D 6000 200 63 10W 10500 270 66
6 87.9 85.0 4.2 47.7 2.2 50 25 6 154.5 159.7 7.4 60.0 3.0 65 25
4 75.9 81.6 3.6 15.1 2.2 50 25 380V, 3N~, 4 181.5 210.4 8.7 27.8 4.0 80 32 380V, 3N~,
07D 7000 240 64 50HZ Belt driven
6 101.1 98.3 4.8 68.4 2.2 65 25 15W 15000 270 68 50HZ
6 230.3 232.0 11.0 62.8 5.5 80 32
4 88.1 94.4 4.2 14.4 2.2 50 25
08D 8000 240 64 4 253.6 294.6 12.1 28.1 7.5 80 32
6 114.5 113.4 5.5 63.3 3.0 65 25 21W 21000 320 70
4 99.1 106.2 4.7 19.0 3.0 65 25 6 303.7 326.2 14.5 78.3 7.5 80 32
09D 9000 280 66
6 126.6 127.6 6.0 37.5 3.0 65 25 4 293.4 338.3 14.0 39.6 11.0 80 32
24W 24000 420 71
4 117.4 125.4 5.6 29.5 3.0 65 25 6 340.2 372.8 16.3 70.7 11.0 80 32
10D 10500 280 67
6 145.1 148.8 6.9 57.9 4.0 80 25 4 366.8 394.6 17.5 43.2 11.0 80 32
4 130.1 138.3 6.2 32.5 4.0 65 25 30W 30000 420 73
12D 12000 280 68 6 425.2 464.0 20.3 75.0 15.0 80 32
6 157.0 166.8 7.5 68.8 4.0 80 25
4 433.1 462.5 20.7 63.7 15.0 80 32
4 165.2 177.0 7.9 27.2 5.5 80 32 35W 35000 520 73.5
15D 15000 320 69 6 514.5 539 24.6 83.6 15.0 80 32
6 204.8 211.6 9.8 56.6 5.5 80 32
1.Cooling capacity is based in the following condition 1.Cooling capacity is based in the following
a)Water temperature: 7°C(inlet)/12°C(outlet) b)Air entering condition: 35°C DB/28°C WB a)Water temperature: 7˚C(inlet)/12˚C(outlet) b)Air entering condition: 35˚C DB/28˚C WB
2.Heating capacity is based on the following condition 2.Heating capacity is based on the following:
a)Water temperature: 60°C(inlet) /50°C(outlet) b)Air entering condition: 7°C DB a)Water temperature: 60˚C(inlet) /50˚C(outlet) b)Air entering condition: 7˚C DB
3.Fresh air unit should be customized, please contact Clivet CAC distributor if you want to purchase Fresh air unit! 3.Fresh air unit should be customized, please contact Clivet CAC distributor if you want to purchase Fresh air unit!
11 12
Vertical type
Dimensions
Return air condition Suspended type
Rated Rated Water External
cooling heating Water flow pressure Motor Chilled Cooling static Power
Model Air volume rate power water pipe water pipe Sound level supply
capacity capacity drop pressure 40 F 60
CKSxxY(Z)/C-H m3/h kW kW L/s kPa kW DN DN \ dB(A) \
4 16.1 32.0 0.8 28.7 0.55 32 25
03L 3000 120 58 Water Outlet
6 20.4 38.0 1.0 71.6 0.75 32 25
4 21.4 42.4 1.0 45.3 1.1 32 25
04L 4000 170 59
6 26.4 49.6 1.3 34.8 1.1 32 25 Connecting Box Water Inlet
4 26.8 53.3 1.3 38.9 1.1 32 25
05L 5000 170 61
6 33.4 61.0 1.6 30.3 1.1 32 25
4 33.1 64.6 1.6 59.5 1.5 40 25 25(20) Condensation 25(20)
06L 6000 170 62
6 40.7 73.5 1.9 40.3 1.5 40 25 Water Outlet
4 43.6 85.3 2.1 38.5 2.2 50 25 C
08L 8000 220 64
6 55.3 98.0 2.6 74.7 2.2 50 25 380V, 3N~,
4 58.9 110.5 2.8 50.6 3.0 50 25 50HZ D D
10L 10500 270 66
6 69.3 128.7 3.3 48.8 3.0 50 25
4 82.1 161.5 3.9 49.1 4.0 65 32
15L 15000 270 68 G G H G
6 103.5 183.0 4.9 38.0 5.5 65 32
4 116.9 235.5 5.6 36.3 7.5 65 32
21L 21000 270 70
6 150.1 264.3 7.2 26.4 7.5 65 32
E
B
E
Hole for Hoist
B
4 136.2 271.8 6.5 53.4 7.5 65 32 (Ø14mm)
24L 24000 320 71
6 174.4 303.4 8.3 37.7 7.5 65 32
4 170.3 339.8 8.1 56.8 11.0 65 32
30L 30000 320 73 20 20 20 20
6 218.0 379.2 10.4 39.8 11.0 65 32 A A
1.Cooling capacity is based in the following 02D/03D/04D 05D/06D/07D/08D/09D/10D/12D/15D
a)Water temperature:7˚C(inlet)/12˚C(outlet) b)Air entering condition:27˚C DB/19.5˚C WB
2.Heating capacity is based on the following:
a)Water temperature:60˚C(inlet) /50˚C(outlet) b)Air entering condition:15˚C DB
13 14
Horizontal type Vertical type
E E
KxL
KxL
A
A
GxH GxH
GxH GxH
D
D
D
C
C
C
C
B B B B
CKSxxY(Z)/C-H 05W 06W 08W 10W 15W 21W 24W 30W 35W CKSxxY(Z)/C-H 03L 04L 05L 06L 08L 10L 15L 21L 24L 30L
A 1160 1160 1260 1410 1360 1510 1510 1560 1710 A 640 640 720 720 800 930 930 960 960 960
B 1053 1153 1353 1553 1953 2353 2653 2653 3053 B 1000 1100 1100 1200 1400 1600 2000 2500 2800 2800
C 920 990 1070 1170 1270 1370 1390 1640 1640 C 1220 1320 1520 1620 1720 1920 2020 2120 2220 2420
D 800 870 950 1050 1150 1250 1250 1500 1500 D 1100 1200 1400 1500 1600 1800 1900 2000 2100 2300
E 1100 1100 1200 1350 1300 1450 1450 1500 1650 E 580 580 660 660 740 870 870 900 900 900
G 309 395 373 430 1040 1203 1572 1572 1776 G 298 331 309 395 373 430 1040 1203 1572 1572
H 341 341 404 478 404 478 478 478 638 H 262 289 341 341 404 478 404 478 478 478
K 993 1093 1293 1493 1893 2293 2593 2593 2993 K 940 1040 1040 1140 1340 1540 1940 2440 2740 2740
L 740 810 890 990 1090 1190 1190 1440 1440 L 490 550 700 750 800 900 1000 1050 1150 1350
186 211 256 325 447 584 644 761 953 4R 153 175 206 231 272 360 491 631 682 786
Weight 4R Weight
(kg) (kg)
6R 197 223 282 342 470 626 692 813 1022 6R 160 183 216 244 289 376 520 673 730 845
15 16
Options Air outlet directions
Customizable ESP Suspended type
Suspended type
Air volume Rows of Motor power (kW) corresponding to external static pressure (Pa)
CKSxxY(Z)/C-H (m3/h) cooling coil 80 120 160 200 240 280 320
02D 2000 4 0.32 0.32 0.32 0.32 0.32 0.32
6 0.32 0.32 0.32 0.32 0.32 0.37
03D 3000 4 0.55 0.75 0.75 0.75 0.75 1.1 1.1
6 0.75 0.75 0.75 0.75 1.1 1.1 1.1
04D 4000 4 1.1 1.1 1.1 1.1 1.1 1.1 1.5
6 1.1 1.1 1.1 1.1 1.1 1.5 1.5
05D 5000 4 1.1 1.5 1.5 1.5 1.5 2.2 2.2
6 1.5 1.5 1.5 1.5 2.2 2.2 2.2
06D 6000 4 1.5 1.5 1.5 1.5 2.2 2.2 2.2
6 1.5 1.5 1.5 2.2 2.2 2.2 2.2
07D 7000 4 1.5 1.5 2.2 2.2 2.2 2.2 2.2
6 1.5 2.2 2.2 2.2 2.2 2.2 3
08D 8000 4 2.2 2.2 2.2 2.2 2.2 3 3
6 2.2 2.2 2.2 2.2 3 3 3
4 2.2 2.2 2.2 2.2 2.2 3 3 Standard: Front below Option: Front up
09D 9000
6 2.2 2.2 2.2 2.2 3 3 3
10D 10500 4 3 3 3 3 3 3 4
6 3 3 3 3 3 4 4
12D 12000 4 3 3 3 4 4 4
6 3 3 4 4 4 4
15D 15000 4 4 4 4 5.5 5.5 Horizontal type
6 4 4 5.5 5.5 5.5
Horizontal type
Air volume Rows of Motor power (kW) corresponding to external static pressure (Pa)
CKSxxY(Z)/C-H (m3/h) cooling coil 170 220 270 320 370 420 470 520 570
4 1.1 1.5 1.5 1.5 1.5 2.2
05W 5000
6 1.5 1.5 1.5 1.5 2.2 2.2
4 1.5 2.2 2.2 2.2 2.2 2.2
06W 6000
6 2.2 2.2 2.2 2.2 2.2 3.0
4 2.2 2.2 2.2 3.0 3.0 3.0
08W 8000
6 2.2 2.2 3.0 3.0 3.0 3.0
4 3.0 3.0 3.0 3.0 4.0 4.0
10W 10500
6 3.0 3.0 3.0 4.0 4.0 4.0
4 4.0 4.0 5.5 5.5 5.5 5.5 5.5
15W 15000
6 4.0 5.5 5.5 5.5 5.5 5.5 7.5 Standard: Front up Option: Front below
4 5.5 7.5 7.5 7.5 7.5 11.0 11.0
21W 21000
6 7.5 7.5 7.5 7.5 11.0 11.0 11.0
4 5.5 7.5 7.5 7.5 11.0 11.0 11.0
24W 24000
6 7.5 7.5 7.5 11.0 11.0 11.0 11.0
4 11.0 11.0 11.0 11.0 11.0 15.0 15.0 15.0
30W 30000
6 11.0 11.0 11.0 11.0 15.0 15.0 15.0 15.0
4 11.0 11.0 11.0 15.0 15.0
35W 35000 Vertical type
6 11.0 11.0 15.0 15.0 15.0
Vertical type
Air volume Rows of Motor power (kW) corresponding to external static pressure (Pa)
CKSxxY(Z)/C-H (m3/h) cooling coil 120 170 220 270 320 370 420 470 520 570 620
17 18
Customizable components Selection
Selection procedures
Name Standard Customized Step 1:
Determine the airflow (m3/h), inlet air condition, total cooling capacity (kW), or total heating capacity (kW). If the inlet air condition
Panel 35mm is beyond the standard condition of the above specifications, please check to the following formula:
Thickness: 25mm
50mm
Q=F1×F2×F3×Q0
Note:
Fan Yilida Kruger Q0—cooling capacity of standard cooling condition, refer to the unit specifications;
F1—temperature correction coefficient of cooling coil, refer to table A;
Power supply: 380V/3N/50Hz;
Other power supply: 220V/3N/60Hz; F2—temperature difference correction coefficient of water, refer to figure 1;
Motor 440V/3N/60Hz; F3—water velocity correction coefficient, refer to figure 2
400V/3N/50Hz 460V/3N/60Hz
Table A. temperature correction coefficient of cooling coil F1
4-rows and 6-rows; 2-rows
Aluminum fins; Hydrophilic aluminum fins; EWT Enter water temperature °C
Cooling coil Copper connecting water pipes;
Seamless steel connecting water pipes; EWB 4 5 6 7 8 9 10
Painted steel drain pan Stainless steel drain pan
17 0.954 0.869 0.781 0.727 0.637 0.533 0.437
1-row heating coil; 18 1.077 0.982 0.895 0.849 0.746 0.649 0.553
1.00 1.00
0.95 0.95
0.90 Δt 0.90 v
3.0 4.0 5.0 6.0 7.0 8.0
0.45
0.5
0.6
0.7
0.8
0.9
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
Water seal - Can be customized to meet the requirement
Figure 1. temperature difference correction coefficient of water F2 Figure 2. water velocity correction coefficient F3
Step 2:
Electrical control box - Can be customized to meet the requirement
Determine the external static pressure (Pa). If the ESP is beyond the standard value of the above specifications, please indicate the
required ESP when you take the order. Take table B as a reference to estimate the air pressure in the duct.
Table B. air resistance of duct
Total air pressure of the duct (Pto)
Air speed(m/s) On-way resistance(Pa/m) Local resistance (Pa/pcs)
Straight pipe Damper Diffuser Bend Plenum
10 1.35 30 30 20
9 1 25 25 18
Motor Coil Air filter Humidifier 8 0.7 20 20 (air outlet speed ≤5m/s) 20 15
7 0.55 15 15 12
6 0.4 12 12 10
Note:
1. Pto = on-way resistance + local resistance, Pa.
2. ESP ≈ Pto.
Step 3:
Electric heater Eliminator UV germicidal lamp Determine the unit structure: horizontal type (W), vertical type (L) and suspended type (D).
Step 4:
Determine the pipe connecting mode: right-handed (Y), left-handed (Z).
19 20
Nomenclature
CKZ 06 09 C-H C L L Y
Pipe connecting mode
Y: Right-handed
air-conditioning systems.
Orientation Air inlet
Unit handling orientation is determined by location of pipe connection
while facing unit in the direction of air flow. The unit below is left-handed
connection unit, otherwise is the right-handed connection unit.
Air outlet
Left-handed unit
21 22
Cold-bridge-free structure
Features
Reliable quality Patented "Labyrinth" panel is integrated male and female aluminum profile. Different panels of the unit casing are mounted and
locked by the labyrinth profile forming labyrinth sealing structure to prevent air-leakage. And well-designed insulation is
Patented "Labyrinth" panel is integrated male and female aluminum profile. Different panels of the unit casing are mounted and
appropriately applied on the panel to beak the cold-bridge. The access door leaf is integrated by highly pressure polyurethane
locked by the labyrinth profile, then fastened with bolts and nuts by embedded sheet metal inside the aluminum profile, and
foam without secondary outer frame mounted and a seal injected by machine without broken on the inner perimeter of the door
interior steel frame are used on the panel connection to enhance the strength. Square steels would be mounted inside the units
to prevent air leakage and forming cold-bridge. Thus, the certified thermal bridging rating of AHRI is CB1 and air leakage rating
to enhance strength for large airflow casing.
reaches CL1 under 2500Pa test condition.
50mm Panel Unit
Bolts Polyurethane
connection foam
Polyurethane
foam
Panel
PU strip
Heat insulation material Flat inner surface State-of-the-art design
The external panel is colored steel sheet with anti-corrosion coat and is cleanable; the fastening bolts are zinc clean.
The outer layer of film prevents panels from scratching during unit assembling and transportation. Clear, smooth and color
Modular design coordination appearance looks attractive.
The MAHUs adopt module design. Usually including mixing section, primary efficiency filter section, medium efficiency filter
section, high efficiency filter section, cooling coil section, heating coil section, humidifier section, sound attenuator section, service Serviceability
section, heat recovery section, fan section and so on. Function sections can be combined freely. Different function sections can be Clivet MAHUs are designed to provide easy access to interior components for routine maintenance and service. The easy-to-move
selected according to the specific applications. panels and access doors of the units provide complete access to the unit interior and components.
The MAHUs can be shipped in divided sections. Each section is wholly completed at manufacturer’s work place, and only
connection of sections can be done at site. Oversized units cannot be fitted in normal container shipment or cannot be delivered Wide usage
through access at site can be considered shipment in complete knock down form, but reassembling works must be done by
engineers of the manufacturer. Clivet MAHUs can be widely used in chemical fibres, electronics industries, textile mills, tobaccos, hospitals, printers, automobile
factories and any other central air-conditioning systems, especially these have special requirements of environment space.
Air Inlet
Section
Filter Section
Coil Section
Humidifier Section
Selection software
Fan Section
A user-friendly software selection program has been provided to help the customer easily define their product requirements.
High-efficiency
Filter Section Air Outlet
Section
23 24
Mechanical specifications Fan assembly
The vibration levels of the complete fan assembly (fan wheel, motor and drives
Base frame assembled as a whole system) is checked and dynamically balanced in the
Unit sections are mounted on galvanized steel or channel steel base frame for convenience of shipment and handling. The frames factory.
provide holes for section connection, and holes for fork-lifting truck. There is a guard rail cross the bottom in the holes to prevent Fans are mainly consisted of scroll, impeller, frame, bearing and shaft. The scroll
unit damage by trucks. is made of hot galvanized steel sheet. Its side plate has an outline complying
The base frame can be used in occasion of concrete plinths or other additional bases that are used on site. However, for high static with aerodynamics. The impeller is made of high grade hot galvanizing steel
pressure application, additional concrete plinths or other additional bases are required at site to raise the units for drain pan’s sheet and is designed to a special configuration according to aerodynamics to
U-trap or float trap. make the efficiency highest and the noise lowest. The high quality ball bearings
Drain pipe are air-sealed, with preset lubricating oil, and of automatically alignment. The
shafts are made of 40Cr or C45 carbon steel bars. They are coated after assembly
in order to provide corrosion resistance.
H
Unit Base
Frame Fan connection is isolated from unit casing by a flexible canvas duct mounted at
100mm
fan discharge outlet. Fan and motor assembly is internally isolated from the unit
casing with spring isolators, furnished and installed by the unit manufacturer.
150mm
Foundation
The drive assembly is consist of belt pulley and motor. The belt type is oil and
Drainage Ditch
heat resistant, antistatic and avoiding electric discharges. Motor is mounted on
Floor Drain
a sliding base to permit adjustment of drive belt tension. Standard motor is
Double skin panel horizontal foot mounting, induction motor, and totally enclosed.
Unit is provided with a painted metal sheet belt guard. The belt guard is rigidly
The external panel is color-coated steel sheet that is resistant to scratch and nicks and shall allow for easy cleaning. The internal
attached to the fan base support structure.
liner is galvanized steel sheet.
Fan assembly section is equipped with an access door with window on the drive
The panels are double skin type with injected polyurethane foam insulation. The panel is moisture proof and anti-corrosive. The
side of the fan.
insulation material is totally enclosed in the panel to avoid any possibility of insulation being exposed to air stream.
The panel is sturdy, in its standard design, unit sections of the same width can be stacked on the top of one another without
additional reinforcement.
Motor
Drain pan Totally enclosed fan cooled motors, with class F insulation, are mounted on slide rails with provision for V-belt tensioning. Fan and
Standard drain pan is steel and painted, fully insulated on the outside with 10mm foam insulation. Stainless steel drain pan is motor are mounted on a common base frame fitted with anti-vibration mountings and the fan discharge is provided with a fire
optional. Connecting pipe is located at bottom of drain pan. The drain pipe is intalled at same side as coil header. retardant flexible connection to completely isolate the fan and motor assembly from the unit casing.
Fan motor is mounted on a horizontal flat plate and can't be supported by the fan or its structural members. Motor is mounted
Access door within the fan section casing on slide rails equipped with adjusting screws. So motor can be moved freely in the horizontal
The access doors are equipped with locking handle which is controllable internally and externally. The access door leaf is direction to reach the correct point then fasten bolts. Installation and maintenance are time saving.
integrated by highly pressurre polyurethane foam without secondary outer frame mounted and a seal injected by machine
without broken on the inner perimeter of the door to prevent air leakage and form cold-bridge.
Vibration protector
The fan motors are mounted on a rigid base frame which is supported by effective spring shock absorber. Shipping brackets are
equipped at the base frame to protect fans, motors and spring shock absorber during transportation.
25 26
Coil Filter
Chilled water coils and hot water coils are AHRI certified and provided to meet the scheduled performance. Coils consist of copper Air filtration is an important component to achieve an acceptable indoor air quality. In MAHUs, earlier low-efficiency filters of the
tubes and aluminum fins. The fins are sine-wave design with slits for better heat transfer efficiency and moisture carry-over limit panel type are giving way to the medium- and high-efficiency bag type and cartridge type of filters.
performance. Filter section is consisted of galvanized steel filter frame structure and an access door for filter maintenance. Low efficiency plate
All coils are installed with space between each component for cleaning and mounting of controls. filter is designed as standard. Bag, cartridge and other high efficiency filters is optioned. The structure of filters are stable and firm,
All cooling coils are mounted over a drain pan. The drain pan extends beyond the leaving side of the coil to help recover high strength and intensity, and easy changing. Filter can be loaded from both left and right side. Front loaded is optioned. The
condensate. filters efficiency is up to 95%.
Coil connections always extend through out of the unit cabinet, allowing for the easy connection of valves and piping. Vents are
located outside the cabinet.
China - GB/T14295
C1 C2 ~ C4 L5 L6 L7 L8 M9 M10 M11 M12 M13 M14 H12 ~ H16 VH17 VH18 VH19 VH20
U.S. - ASHRAE
Usually, there is no humidifier installed in the MAHUs for comfort air conditioning systems, but the outdoor climate is very cold in
Europe - Old
winter so that if a humidifier is not employed, the winter indoor relative humidity may be too low. Humidifiers are necessary for Standard
EU1 EU2 EU3 EU4 EU5 EU6 EU7 EU8 EU9 EU10 EU11 EU12 EU13 EU14
health care facilities and processing systems in pharmaceutical, semiconductor, textile, communication centers, and computer
rooms.
In Clivet MAHUs, wet film vaporization, dry steam, electrode boiler, and water spray humidifiers are widely used. Wet film
Air dampers
vaporization humidifier is a type of enthalpy humidifier or evaporation gasification humidifier. Through the principle of exchange
of heat and moisture, the air is humidified and cooled. The medium is inorganic material which is high-life, high reliability, clean, Air dampers in MAHUs are optional. Aerodynamically designed
good heat conduction and bacteria resistance. Dry steam or electrode boiler humidifiers are widely used in where a warm air damper blades have built in high quality bearings. Blade edges are
supply and humidity control are needed in winter. lined with sealing strip to restrict leakage to an absolute minimum. Air
damper blades are either linked to give parallel turning operation or
gear set to give opposing direction. The dampers are tested to yield
linear control characteristic.
Mixing dampers working in pairs and can be coupled in such a way
that if one is 75% open the other is 25% open.
27 28
Funtional Sections
Funtional Sections Description Filters Section
The cross sectional air speed for entering air is uniform and greater than 80% of the
Cabinet nominal air speed of the unit.
Classification of filters:
Cabinets consist of standard panels measuring 100mm each in length. The
- Primary
interconnecting parts of panels are made of proprietary designed aluminum
Panel and Bag type; Made of synthetic fiber and nonwoven cloth.
profiles which guarantee minimum air leakage and panels are fitted together with
- Secondary
bolts and nuts. As a result, the panels can be assembled or dis-assembled at site
Panel, Bag and Rigid type; Made of fiber glass.
without compromising the quality of assembly. The construction of panels are
- Sub-Hepa
formed with pre-coated grey color GI metal sheet (external surface), PU foam (as
Bag and Rigid type; Made of fine fiber glass.
insulation material) and GI metal sheet (internal surface). The proprietary designed
- Hepa
aluminum frames for panels act as built in structural supports and strengthened by
Rigid and Paper type.
additional internal/hidden frames. Apart from that, the bottom panels are
- Active Carbon Filter
designed to withstand weight of service and maintenance personnel without
Used to remove bad odor and pollution from air. Normal filters are required to be
deformation of panels. The highly integrated method of joining ensure minimum
installed before and after Active Carbon Filter to prolong the lifespan of filter and
leakage, no cold bridge, minimum or no corrosion, rigid and strong. The unit and
Panel Filter to prevent loose carbon particles from entering the air stream.
components come with hanging/hoisting holes for easier transportation and
commissioning at site.
Mixing Section
Providing chamber for mixing of return air and fresh air to adjust the ratio of air
mixture. It has air dampers, made of GI metal vanes with aerofoil profile which can
be controlled manually or by motor. Sizing of air dampers is based on maintaining
surface velocity of 8m/s to ensure that the noise generated by the air dampers
does not exceed overall noise level of the unit. When the air dampers are installed
in the unit, the section length will determine the height of the dampers and
maximum height is equals: (Section Length - 160)mm.
29 30
Coil Section Fan Section
Base on the requirements of air flow rate and external static pressure, the selection
Cooling and Heating coils are made of aluminum fins and copper tubes. Copper software is able to select one or multiple centrifugal fan. Various types of fan blades
tubes are mechanically expanded and securely bonded to aluminum fins. Alumi- design can be chosen base on different application needs, i.e. Forward Curved,
num fins range from 8 to 13 fins/inch. The coils are designed for easy maintenance Backward Curved and Aerofoil.
and can be easily slided out for service and maintenance works. The headers of coil
are made of steel with an air vent at the top and also an water release port at the Fan are statically and dynamically balanced and are driven by multiple anti-static
bottom. Coil’s cross sectional air speed is greater than 80% of nominal air speed. All V-belts. Bearings are of seal type and there is no lubrication required for the whole
coils have been leak tested with 2.5MPa pressure and the recommended operating life of bearings. All the blower housing and frames are made of GI steel.
maximum operating pressure is 1.6MPa. All water pipes and condensing water
pipes are located at the same side of the unit. Optional water droplets eliminator Fan motors are totally closed, with single speed and 4 poles in general. Base
can be installed to prevent water carry over even at high air velocity. The drain pan bracket/frame of fan motor is adjustable and together with fan blower, they are
is made of insulated steel plate and galvanized steel pipes as condensate water sitting on a structure that equipped with vibration isolator (with noise damper and
discharge pipe. adjusting rod).
Flexible ducting is used to connect fan discharge to the unit and all Fan Sections are
equipped with access door, detachable service panel that enable the fan and
motor to be completely removed from unit for replacement or maintenance.
Cooling Coil
Humidifying Section
a. Dry steam humidifier - Isotherm humidifier, made of stainless steel and with
properties of high corrosion resistance, small size, easy installation, clean humidifi-
cation and high efficiency. There are 2 types of dry steam humidifier, i.e. electric
driven or manual.
Applicable for sites with steam source.
Steam Humidifier
Heating Coil
Evaporative Cooling
Wet Film Humidifier
31 32
Sound Attenuator Section
d. High pressure spray humidifier - pressurized the water and inject through nozzle Under different application requirements and noise characteristics of fan, 2 types
to create mist and humidify the air through vaporization of the mist. The efficiency of Sound Attenuators can be installed, i.e. Sound Absorption Medium Plate Muffler
is about 40 ~ 50%. or a Micro-Perforated Plate Muffler. Sound Absorption Medium Plate Muffler is
made of perforated panel filled with noise absorbing material. It has good sound
attenuation effect towards high and medium frequency noise. Micro-Perforated
Plate Muffler is made of micro-perforated panel which applying principles of
resonance for sound attenuation. It has good filtering effect for low and medium
frequency noise. Since it does not require sound absorbing medium, it is
non-polluting and not affected by moisture. Sound attenuator can be classified as
Return Air Sound Attenuator and Supply Air Sound Attenuator.
b. Intermediate heat exchanger - the media used can be water or glycol solution
and can be applied for small temperature difference system. The efficiency is lower
than 60%.
c. Counter flow plate heat exchanger - fresh air and exhaust air exchange the
energy in the plate type heat exchanger and depends on the material used for heat
exchanger, the heat transferred can be sensible only or total heat. The efficiency is
about 50%, however, due to no physical contact of fresh air and exhaust air, there
is no pollution of fresh air by the exhaust air.
Air Washer Humidifier
d. Heat pipe heat exchanger - each pipe contains Freon or ammonia as the
working fluid and the heat recovery is done through phase change of working fluid
with no moving parts involve.
Electric Heater Section
There are 2 types of electric heater used, spiral fins type or PTC heating elements. Gas Heater Section
The heating elements are fitted on a frame and the control for heaters is field
supplied. There are two methods of heating, one is to burn the gas directly inside the
plenum to heat the air stream and it is suitable for huge conditions space. Second
is to heat the air at the burner outside the unit and channel the hot air through
tubes which are running within the air stream. This will avoid consuming the
oxygen in the air stream and maintain the supply air quality.
33 34
Function Sections Spcifications
Unit Modules L
0607-1117 600
High Pressure Spray L=900
Mixing Box 1217-2126 800
Humidifier Eliminator is needed
2227-2534 1000
L 2834-4565 1200 L
Outlet Filter Installed outside the unit body, does not occupy the space. Spray Section 2 rows L=2100
L L
L=100
The plate type filter has the primary effect and the middle effect for optional,
Plate Filter Heat Recovery
and can be arranged in the mixed section or the outer space and not occupy L according to the specific conditions to be selected.
Section
the space.
L L
L L
Unit Modules L
0607-1925 1200
Fresh Air Exhaust Section Fan Section L=700-3500
2025-2940 1500
L 3141-4565 1800 L
L
Unit Modules
(1-4Row) (5-6Row) (8-12Row)
Chilled Water Coil Diffuser L=600
0607-2940 600 700 900
T L
L=600
<4 300 Set befor the filtering section,chilled water coil section,
Electric Heater Middle Section
heating section and silencer section, easy to maintain
≥4 700
and repair.
L T=Electric Heat(W)/Air Volume(CMH) L
Unit Modules L
0607-1117 600
L=600
Steam Humidifier Air Outlet Section 1217-2126 800
If placed behind the fan section, requires 900mm.
2227-2534 1000
L L 2834-4565 1200
Shared section length with chiller water coil section, if segmeted, it needs to Other Function Evaporative cooling section L=900
Wet Film Himidifier
be 600mm. Sections
High-efficient self-cleaning filter barrel type filter section L=1800
L Combustion L=3000
35 36
Fan Outlet Direction Configurations
Horizontal Combination 1: Horizontal Combination 2:
Air Entering
Mixing + Panel Filter + Cooling Coil + Fan Mixing + Panel Filter + Bag Filter + Cooling Coil + Fan
Upper Rear (UR) Upper Front (UF) Front Bottom (FB) Front Top (FT)
Horizontal Combination 3: Horizontal Combination 4:
Exposed Filter + Cooling Coil + Fan Mixing + Panel Filter + Bag Filter + Cooling Coil + Heating Coil + Fan
Horizontal Combination 5:
Air Entering
Mixing + Panel Filter + Cooling Coil + Heating Coil + Humidifier + Fan + Di fusion + Bag Filter + Air Supplyf
Air Entering
37 38
Specifications Cooling capacity
Fresh Air Condition(7°C) Cooling Capacity Return Air Condition(15°C) Cooling Capacity
Air volume Unit Model
Rated Flow
4Row 6Row 8Row 4Row 6Row 8Row
Air flow volume Coil face air velocity (m/s) CKZ/C-T Sensible Total Sensible Total Sensible Total Sensible Total Sensible Total Sensible Total
CKZ/C-T (m3/h) m3/h
2.00 2.25 2.50 2.80 3.00 3.50 kW kW kW kW kW kW kW kW kW kW kW kW
06 07 1567 1762 1958 2193 2351 2742 06 07 1958 9 21 12 29 13 31 8 9 9 12 10 15
06 08 1790 2014 2238 2506 2685 3133 06 08 2238 11 24 14 33 15 36 9 11 10 14 11 17
06 09 2207 2783 2758 3089 3311 3862 06 09 2758 13 29 17 41 18 44 11 13 12 17 14 21
06 10 2527 2843 3158 3537 3791 4422 06 10 3158 15 33 19 46 21 50 12 15 14 19 16 24
07 10 2888 3249 3610 4043 4332 5054 07 10 3610 17 38 22 53 24 58 14 17 16 22 18 28
07 11 3253 3660 4067 4555 4880 5693 07 11 4067 19 43 25 60 27 65 16 20 18 25 21 31
08 10 3610 4061 4512 5053 5415 6318 08 10 4512 21 47 28 66 30 72 18 22 20 27 23 35
08 11 4067 4575 5083 5964 6101 7117 08 11 5083 24 53 31 75 34 81 20 24 22 31 26 39
08 12 4524 5089 5655 6334 6786 7917 08 12 5655 27 59 35 83 37 90 22 27 25 34 29 43
22 27 33866 38099 42333 47412 50799 59266 23 26 45065 212 474 276 663 297 719 176 216 198 274 227 346
23 26 36052 40558 45065 50473 54078 63091 22 30 49420 233 520 303 727 326 789 193 238 217 300 250 379
25 28 53276 251 560 327 784 352 850 208 256 234 324 269 409
22 30 39536 44478 49420 55351 59304 69188
25 31 59449 280 625 365 875 392 948 232 285 261 361 300 456
25 28 42621 47949 53276 59670 63932 74587
25 34 62621 309 690 402 965 433 1047 256 315 288 398 331 503
25 31 47559 53504 59449 66582 71339 83228
28 34 74735 352 786 458 1100 493 1192 292 359 328 454 377 573
25 34 52497 59059 62621 73495 78746 91870
28 38 84107 397 885 516 1237 555 1342 328 404 370 511 424 645
28 34 59788 67261 74735 83703 89682 104629
29 40 90959 429 957 558 1338 600 1451 355 437 400 552 459 698
28 38 67286 75697 84107 94200 100929 117751
31 41 99115 467 1043 608 1458 654 1581 387 476 435 602 500 760
29 40 72767 81863 90959 101874 109151 127342
32 45 111833 527 1177 686 1645 738 1784 436 537 491 679 564 858
31 41 79292 89204 99115 111009 118938 138761
35 46 126904 598 1335 778 1867 838 2025 495 609 558 771 640 973
32 45 89467 100650 111833 125253 134201 156567
37 50 146713 692 1543 900 2158 968 2341 573 705 645 891 740 1125
35 46 101523 114213 126904 142432 152285 177665
38 55 171152 807 1801 1050 2518 1130 2731 668 822 752 1039 863 1313
37 50 117371 132042 146713 164319 176057 205399 43 58 206317 973 2171 1265 3035 1362 3292 805 991 906 1253 1040 1582
38 55 136921 154037 171152 191690 205382 239612 45 65 239469 1129 2519 1468 3523 1581 3821 935 1150 1052 1454 1207 1837
43 58 165054 185685 206317 231075 247581
Notes:
45 65 191575 215522 239469 268205 280000
1.Fresh air condition: air inlet 35°C DB/28°C WB;
2.Return air condition: air inlet 27°C DB/19.5°C WB;
3.Chilled water inlet/outlet temperature 7/12°C, coil face air velocity 2.5m/s;
4.The above parameters are for reference only, if test conditions change will lead to different cooling capacity, specific data please contact us.
39 40
Heating capacity Section length
Fresh Air Condition(7°C) Total Heat Return Air Condition(15°C) Total Heat Length(mm)
Unit Model Rated Flow Unit Model
1Row 2Row 3Row 4Row 1Row 2Row 3Row 4Row Close Knit Fresh Air Chilled Water Chilled Water Chilled Water Steam Hot Middle Fan Fan
CKZ/C-T CKZ/C-T Mixing Box Plate Filter Bag Filter Silencer Others
m3/h kW kW kW kW kW kW kW kW Filter Exhaust Section Coil(1-4row) Coil(5-6row) Coil(8-12row) Water Heating Section (Type A) (Type B)
06 07 1958 12 18 23 26 9 14 19 21 06 07 600 100 400 400 1200 600 700 900 300 600 800 900(200) 1100(225)
06 08 2238 14 20 26 30 10 16 21 24 06 08 600 100 400 400 1200 600 700 900 300 600 800 900(200) 1100(225)
06 09 2758 17 25 32 37 12 20 26 30 06 09 600 100 400 400 1200 600 700 900 300 600 800 700(200) 1200(280)
06 10 3158 20 29 37 42 14 23 30 34 06 10 600 100 400 400 1200 600 700 900 300 600 800 700(200) 1300(135)
07 10 3610 23 33 42 48 16 26 34 39 07 10 600 100 400 400 1200 600 700 900 300 600 800 700(200) 1300(135)
07 11 4067 26 37 47 54 18 29 39 44 07 11 600 100 400 400 1200 600 700 900 300 600 800 800(225) 1300(135)
08 10 4512 28 41 52 60 20 32 43 49 08 10 600 100 400 400 1200 600 700 900 300 600 800 700(200) 1300(135)
The length of the heat recovery section and dehumidification section should be selected according to the actual conditions; Combustion Section: 3000;
08 11 5083 32 46 59 68 23 36 49 55 08 11 600 100 400 400 1200 600 700 900 300 600 800 800(225) 1300(135)
08 12 5655 36 52 65 75 25 41 54 62 08 12 600 100 400 400 1200 600 700 900 300 600 800 800(315)
08 13 6226 39 57 72 83 28 45 59 68 08 13 600 100 400 400 1200 600 700 900 300 600 800 800(315)
08 14 6798 43 62 79 91 30 49 65 74 08 14 600 100 400 400 1200 600 700 900 300 600 800 800(315)
10 12 7351 46 68 85 98 33 53 70 80 10 12 600 100 400 400 1200 600 700 900 300 600 800 800(315) 1500(400)
10 13 8094 51 74 94 108 36 58 77 88 10 13 600 100 400 400 1200 600 700 900 300 600 800 900(355) 1500(400)
10 15 9580 60 87 111 128 42 69 91 105 10 15 600 100 400 400 1200 600 700 900 300 600 800 900(355) 1500(400)
10 16 10323 65 94 120 138 46 74 99 113 10 16 600 100 400 400 1200 600 700 900 300 600 800 900(355) 1500(400)
11 15 11054 70 101 128 147 49 79 106 121 11 15 600 100 400 400 1200 600 700 900 300 600 800 100(400) 1800(500)
11 16 11911 75 109 138 159 53 85 114 130 11 16 600 100 400 400 1200 600 700 900 300 600 800 100(400) 1800(500)
11 17 12769 81 116 148 170 57 91 122 139 11 17 600 100 400 400 1200 600 700 900 300 600 800 1100(450) 1800(500)
12 17 13620 86 124 158 182 60 98 130 149 12 17 800 100 400 400 1200 600 700 900 300 600 800 1100(450)
12 18 14534 92 133 168 194 64 104 139 159 12 18 800 100 400 400 1200 600 700 900 300 600 800 1100(450) 1200(500)
13 17 15322 97 140 177 204 68 110 146 167 13 17 800 100 400 400 1200 600 700 900 300 600 800 1100(450)
13 18 16351 103 149 189 218 72 117 156 178 13 18 800 100 400 400 1200 600 700 900 300 600 800 1100(450) 1200(500)
Notes: Note:
1.Heating water inlet/outlet temperature 60/50°C, coil face air velocity 2.5m/s; 1.The length of the unit is equal to the sum of the length of each function;
2.The above parameters are for reference only, if test conditions change will lead to different heating capacity, specific data please contact us. 2.Function segment length will be modified because of the specific design, the above data for reference only.
41 42
Weight of function sections (empty box) Weight of function sections (parts)
Empty Box Weight (kg) Weight (kg)
Unit Model
Wall Thickness 25mm Wall Thickness 35mm Wall Thickness 50mm Unit Model Primary Primary Wet Film Humidifier (Dry) Standard 1/2 Coil (No Water)
CKZ/C-T Mixing Box
End-plate 300 600 900 1200 End-plate 300 600 900 1200 End-plate 300 600 900 1200 CKZ/C-T Efficiency Efficiency Eliminator Silencer Thickness Thickness Thickness Thickness
Air Valve 1Row 2Row 3Row 4Row 5Row 6Row 8Row 10Row 12Row
06 07 5 38 68 86 99 6 40 70 90 104 7 41 73 99 111 Palte Filter Bag Filter 50mm 100mm 150mm 200mm
06 08 6 40 70 88 101 7 42 72 93 107 8 43 75 102 116 06 07 11 4 4 5 15 7 8 10 11 15 19 21 23 25 28 32 37 41
06 09 7 42 72 97 111 8 44 74 101 116 9 45 77 104 126 06 08 11 5 5 6 18 7 9 10 11 17 22 23 25 28 31 36 41 46
06 10 8 44 74 102 117 9 46 75 106 122 10 47 79 106 132 06 09 15 5 5 7 20 8 9 11 13 17 22 24 26 30 33 39 45 50
07 10 8 45 75 104 119 9 47 77 107 124 10 48 81 110 134 06 10 18 6 6 8 22 8 10 11 13 17 23 26 28 32 36 43 49 55
07 11 9 47 77 107 123 9 49 79 109 125 10 50 83 112 138 07 10 18 6 7 10 26 8 10 12 14 19 26 29 32 36 40 47 54 61
08 10 10 46 76 105 121 11 48 78 108 126 12 49 82 112 136 07 11 20 7 8 11 28 8 10 12 15 20 27 30 34 38 43 51 59 66
08 11 10 48 78 108 124 11 50 80 110 127 12 51 84 114 139 08 10 18 7 8 12 29 9 11 13 15 23 31 34 38 43 48 57 66 74
08 12 10 50 80 110 127 11 52 82 112 132 12 53 86 116 142 08 11 20 8 9 14 32 9 11 13 16 24 32 36 40 46 52 62 71 80
08 13 11 52 82 112 132 12 54 84 114 139 13 55 88 118 145 08 12 22 9 10 15 35 9 12 14 17 25 34 38 43 49 55 66 76 86
08 14 12 54 84 114 135 13 56 86 116 143 14 57 90 120 148 08 13 24 10 10 17 38 9 12 15 17 26 36 40 45 52 59 70 81 92
43 44
Selection software Selection interface
To help customers define their product requirements easily, a user-friendly software selection program is provided. The program
leads the user through the selection process by pertinent input data for all components required. Component sections are
selected by placing them on a configure screen. Once the unit layout is defined, the options and accessories are identified. The
program gives immediate feedback about fan and coil selection, offering serial options based on the performance inputs. Once
final component selections have been made, the program provides all output needed, including unit specification, dimension,
weights, fan curves and so on.
Report interface
Main interface
45 46
Installation Hoist
Transportation
Cable Support
Depending on size of the units, transportation mode may be different. Units can be shipped in full assembly if the size is small
enough. Otherwise, they can be arranged to be shipped in the form of CKD (Complete Knock Down).
Cable
Placement of Unit
If unit needs to be placed outdoor, ensure the unit is free from dust, rain, snow and keep it away from animals to protect the
Steel Pipe
exterior finishing of the unit. The unit cannot be exposed to hot sun or the insulated panels may be deformed or discolor. Do
not stack units in storage.
Lifting of Unit
Keep the unit level while moving or lifting to avoid damage. Hoist the unit through lifting holes provided. Ensure there is proper
protection procedures adopted duirng lifting (for example, to put chipboard/plywood to isolate the lifting cable and the unit)
to protect the surface of the unit.
Water Pipe Installation
Foundation 1. Keep the water pipes clean and install filter at the inlet of water pump.
1) Leveling of the foundation will affect the installation and operation of the unit. If the foundation is not level, the following 2. The condensate water pipes are positioned at the bottom of the unit. The U-trap needs to be installed (refer diagram below) to
problems could happen: ensure condensing water can be discharged freely and to prevent in-flow of odor.
a) Difficult to install 3. Use torque wrench when installing the water inlet/outlet pipes. The torque should be less than 250.8N.m (21kgf.m) to prevent heat
b) Air leakage at joints of panels and sections exchanger from being damaged. Install valves at water supply and return pipes outside the unit (except the condensing water
c) Condensate water discharge problem discharge pipes) for modulation of water volume and to isolate the unit during maintenance. All the water pipes outside the unit
d) Fan installation problem It is recommended that the difference of level to be within ±3mm. should be properly insulated.
2) The foundation can be made of concrete or welded steel. Keep the steel surface smooth while welding. The height of foundation 4. If hot or chilled water is the media of the heat exchanger, the water inlet pipes are positioned at the bottom and water outlet pipes
should not be less than 150mm. The water drainage is required for discharge of condensation water and for maintenance purposes. are positioned at the top. If the media is steam, the air inlets are positioned at the top and water outlet pipes are at the bottom.
3) Ensure that the foundation able to withstand the total weight of unit. Add shock absorber under the foundation if necessary. 5. All the water pipes must be sealed and ensure no leakage.
6. The standard chilled water temperature should not be lower than 5°C. Hot water temperature should not be higher than 80°C and
Unit Installation 60°C is the recommended hot water temperature.
The installation must be done by certified installer. Take note of the following:
1) Strictly comply with the installation instructions provided.
2) Leave enough space for repair and maintenance.
Drain pipe
3) Use flexible duct for section of duct connection between the unit and external air duct to avoid vibration transmisssion.
4) The panels must be fitted tightly. Rubber gasket must be compressed properly to avoid air leakage.
5) Air filter should be the last item to be installed. Unit
6) Proper cleaning must be carried out to clean the interior of the unit to remove debris of installation before commissioning.
Hmm
75mm
Base
47 48
Servicing and Maintenance Reference Projects
The following should be examined and replaced if necessary: Hotel & Restaurant
1. Coils should be cleaned frequently and periodically. After 2-3 years of operation, the internal wall of water pipes should be
thoroughly cleaned and if condition permit, use soft water.
2. If the unit is not in operation during winter, all the water in the system must be released,otherwise the coil will crack.
3. Check the condition of filter periodically (recommend to check monthly). If the unit is equipped with Pressure Differential
Gauge, filter must be cleaned or replaced if the predefined value is reached. Recommended value for different type of filters are
as following:
Filter specifications Resistance value
4. The belt tension should be re-checked one week after commissioning. Subsequently, it should be examined once every 3
months. Ramada Plaza (Five Star)
Country: China
5. The terminals for electrical wires should be re-tightened 3 days after commissioning. City: Shunde
Total Capacity: 2,500 RT
Outdoor Unit: Water-cooled screw chiller
6. Bearings for fan and motor must be examined periodically (recommended 3 months once). Abnormality of bearings can be
Indoor Unit: AHU & FCU
determined through abnormal noise and vibration of fan, excessive usage of lubrication oil or through special bearing testing Completion Year: 2009
devices. Once the faulty bearings are identified, they should be replaced immediately. Total Floor Area: 50,000 m²
7. It is recommended to check the rubber gasket, flexible ducts and connections monthly. Immediate replacement is necessary if
it is found to be leak.
49 50
Transportation Sports
Culture facilities
Industry
51 52