Scribd Logo
Upload

Welcome to Scribd!

  • Question Paper Code: X10713: (10×2 20 Marks)

    Uploaded by

    Afsal Mohamed Kani
    143 views3 pages
    This document contains information about a mechanical engineering examination for a course on process planning and cost estimation. It includes 15 multiple choice questions and short answer questions on topics like collective-single part drawing, continuous vs intermittent cutting, time calculation for turning, break-even analysis, cost accounting, depreciation, surface finish in hot working, indirect material costs, approach length in turning, operations for gripping metal handles, CAPP systems, machine selection factors, jig and fixture design, process planning documents, cost elements, standard time allowances, welding cost calculation, upsetting process calculation, turning time calculation, and shaping time calculation. It also contains two long answer questions on the economics of bolt production using different machines and creating a process

    Original Description:

    Question paper me8793 2022

    Original Title

    X10713(ME8793)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains information about a mechanical engineering examination for a course on process planning and cost estimation. It includes 15 multiple choice questions and short answer questions on topics like collective-single part drawing, continuous vs intermittent cutting, time calculation for turning, break-even analysis, cost accounting, depreciation, surface finish in hot working, indirect material costs, approach length in turning, operations for gripping metal handles, CAPP systems, machine selection factors, jig and fixture design, process planning documents, cost elements, standard time allowances, welding cost calculation, upsetting process calculation, turning time calculation, and shaping time calculation. It also contains two long answer questions on the economics of bolt production using different machines and creating a process

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    143 views3 pages

    Question Paper Code: X10713: (10×2 20 Marks)

    Uploaded by

    Afsal Mohamed Kani
    This document contains information about a mechanical engineering examination for a course on process planning and cost estimation. It includes 15 multiple choice questions and short answer questions on topics like collective-single part drawing, continuous vs intermittent cutting, time calculation for turning, break-even analysis, cost accounting, depreciation, surface finish in hot working, indirect material costs, approach length in turning, operations for gripping metal handles, CAPP systems, machine selection factors, jig and fixture design, process planning documents, cost elements, standard time allowances, welding cost calculation, upsetting process calculation, turning time calculation, and shaping time calculation. It also contains two long answer questions on the economics of bolt production using different machines and creating a process

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 3

    *X10713*

    Reg. No. :

    Question Paper Code : X10713

    B.E./B.Tech. Degree Examinations, November/december 2020


    and April/May 2021
    Seventh/Eighth Semester
    Mechanical Engineering
    ME 8793 – Process Planning and cost estimation
    (common to materials science and Engineering, mechatronics Engineering,
    mechanical and automation Engineering, and Robotics and automation
    /production Engineering/manufacturing Engineering)
    (Regulation 2017)

    Time : Three Hours Maximum : 100 Marks

    Answer all questions.


    paRT – a (10×2=20 Marks)

    1. Write short notes on collective-single part drawing.

    2. Differentiate between continuous cutting and intermittent cutting with an


    example.

    3. In a turning process, the length of work piece is 80 mm, feed is 0.5 mm/rev.
    and cutting speed is 500 rpm. Calculate the time required for the cutting
    operation.

    4. In a manufacturing industry, the fixed cost for a particular year is Rs. 2,50,000.
    The variable cost is Rs. 15 per unit. The selling price of the component is
    Rs. 40. Calculate the value of break-even quantity.

    5. Brief on cost accounting.

    6. What do you mean by depreciation ?

    7. In hot working process, surface finish is not good. Justify this statement.

    8. List out few examples for indirect material cost in casting.

    9. Define approach length in turning process.

    10. Which operation is done to provide gripping in metal handles ?


    X10713 -2- *X10713*
    paRT – B (5×13=65 Marks)
    11. a) Explain in detail about the retrieval type CAPP system.
    (OR)
    b) Enlist the technical factors to be considered for machine selection
    and explain them in short.

    12. a) Discuss about the principles of jigs and fixtures design.


    (OR)
    b) List out the set of documents required for process planning.

    13. a) Briefly explain the various elements of cost.


    (OR)
    b) Classify and explain the allowances used in calculating the standard
    time.

    14. a) It is required to make a lap joint in a 11 mm M.S. plate using flat welding
    position with 8 mm electrode as shown in figure. Welding speed is 10 meters
    per hour. When 0.4 kg of metal is deposited per meter length of joint for
    the current used with 250 amperes and voltage is 30 volts. Labour cost
    is Rs. 50 per hour, power rate is Rs. 8 per KWhr and cost of electrode is
    Rs. 60 per kg. Efficiency of the machine is 50% and operating factor is 60%.
    Calculate the cost of labour, power and electrode per meter of welding.


    (OR)
    b) 200 components have to be manufactured as shown in the figure, by
    upsetting process from a 30 mm diameter bar. Calculate the net weight,
    gross weight and length of 30 mm bar required. Consider the total losses
    of the process as 12%. The density of the material is 7.86 gm/cc.


    *X10713* -3- X10713
    15. a) Calculate the total time required to turn one component shown in figure
    from a 50 mm diameter raw material, using a spindle speed of 800 rpm,
    feed 0.4 mm/rev. and depth of cut 2.5 mm/pass for the whole operation.


    (OR)
    b) Calculate the time required for shaping a C.I. block of 500 × 200mm. The
    cutting speed of shaper is 15 m/min with a feed of 0.9 mm/stroke. The
    clearance on each side is 20 mm along the length and 15 mm along the
    width. The ratio of return stroke to cutting stroke is speed is 3:2.

    paRT – C (1×15=15 Marks)


    16. a) A bolt can be produced either by capstan late or CNC lathe. In capstan
    lathe, time taken is 1 hour and overhead cost is 50% of labour cost. In CNC
    lathe time taken is 5 hours for 100 products and overhead cost is 120% of
    labour cost. The material cost of each product is Rs. 60 and labour cost is
    Rs. 50/hour in both machines. Which of these two machines is economical
    for making the bolt ?
    (OR)
    b) List out the various operations involved in the manufacturing of the part
    shown in figure from a mild steel raw material of 60 mm diameter and
    130 mm length. Make a process planning sheet and indicate the machines
    and cutting tools required for the same. Tolerance is ± 0.1 mm unless
    specified.

    You might also like