Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 4

OUR LADY OF FATIMA UNIVERSITY

COLLEGE OF COMPUTER STUDIES


ANTIPOLO CITY

Project A PIR-Sensor Based Street Lighting System


Title No.
1

Propone 1. Cabida, Ivan Alexis P.


nts /
Research 2. Bantilo, Brian Dexter A.
ers 3. MAIA ELLA MONTECALVO

4. FRANK CESAR QUINAMPAY

REASO
N(s) /
JUSTIFI The researchers reason to choose this topic nowadays people that are walking in the street
CATION
especially in dark alleys are being scared of some people that have dangerous intentions that
(s) IN
CHOOSI are hiding in the dark because dark alleys can get their lower chance of being spotted by
NG THE
TOPIC: passersby and the people that are walking they may not be able to safely attract the attention

of anyone passing by to seek for help. Another reason is that Power crisis is one of the most

common problems in the Philippines. By the help of the sensors we can minimize the wastage

of electrical power or save our

generated power. PIR is the type of sensor that gives us signals when anything crosses its

rays. It is an electronic sensor that measures infrared (IR) light radiating from objects in its

field of view A PIR-based motion detector is used to sense movement of people,animals,

or other objects. It can also be helpful in the security systems. In many offices there are

pavements where lights are kept switched on for the whole night and day. But if we use the
sensor then only when it gets motion it will give a signal and the lights will be switched on.

So this project is very low cost and also power sufficient. also it creates an opportunity for

minimizing the load shedding in the cities and villages.

Scope of
the Study
 The study will focus on creating Led light motion detectors
as street light, especially in dark alleys.
 The study will help individuals in avoiding dangerous
circumstances such as crime.
 The study will help reduce electricity power consumption
and minimize the electricity bill.

 The system only revolves on making PIR motion detector light and the use
of arduino.
Limitatio
 The system light will only turn on in the dark when there is motion detected.
ns of the
 The system motion detector limit is only 50meter wide.
Study
Project  Software Specification
Design/D
evelopme  Arduino Software
nt Plan

 Hardware Specification

 Pi 3b+ board

 Arduino Uno R3

 HC-SR501 PIR Motion Detector Sensor

 4gb ram

LIST OF *** State here your list of related literature and studies at least 3***
RELAT
ED *** Your supporting documents must be in next page***
LITERA Indra, R (2018). Motion Sensor Application on Building Lighting Installation for Energy Saving
TURE and Carbon Reduction Joint Crediting Mechanism. Retrieve July 2018  from World Wide Web
and https://www.researchgate.net/publication/326578353_Motion_Sensor_Application_on_Building_
RELAT Lighting_Installation_for_Energy_Saving_and_Carbon_Reduction_Joint_Crediting_Mechanism
ED Syed Puspita, M. (2016).AUTOMATIC LIGHTING AND SECURITY SYSTEM DESIGN
STUDIE USING PIR MOTION SENSOR. Retrieve January 2016 from World Wide
S Web:https://www.researchgate.net/project/Other-Research-Areas
CONSU
Ching Yee, Y (2011) Motion Detection and Analysis with Four Different Detectors. Retrieve
LTED
September 2011 from World Wide
Web:https://www.researchgate.net/publication/258996415_Motion_Detection_and_Analysis_wit
h_Four_Different_Detectors

You might also like