Gap Analysis of Approaches To Implementation of Management Systems
Gap Analysis of Approaches To Implementation of Management Systems
net/publication/287213428
CITATIONS READS
0 4,783
1 author:
Miroslav Hrnčiar
University of Žilina
15 PUBLICATIONS 44 CITATIONS
SEE PROFILE
All content following this page was uploaded by Miroslav Hrnčiar on 18 December 2015.
ABSTRACT
Purpose: The implementation of management systems into an organization
pursues various objectives according to motives of the management. These most
frequently include obtaining a certificate which will enable access to contracts
requiring the supplier organization to hold a certificate for a specific management
system. Aims of the implementation related to the improvement of organization
functioning in the given area of management are, according to opinions of
leading employees of organizations, not always achieved. This is largely caused
by the approach to the management system implementation by the organization,
or, better said, its managers and employees.
Methodology/Approach: The article presents GAP analysis and its results,
which reveals problems and issues of the process of implementation of quality
management system. Basic precondition for the success of application of the
quality management system application is the understanding of the quality
management system standard as the tool for achieving the vision of the
organization. The structure of introduced form of GAP analysis is retrospectively
aimed at filling differences in how the process of implementation of the
management system should have been performed in order to be linked to the
vision and policies of the organization, which are based on own research and
experience of the author.
Findings: When the case concerns an external support of implementation,
consultancy companies pursue one major aim - to meet requirements set forth in
standards, whereas the crux is placed on formal creation of evidence of meeting
the requirements. Certification bodies focus on such evidence, whereas a deeper
examination of efficiency of the management system functioning is not always
thoroughly performed. The results highlighted the key gaps in the process of
management system implementation, which are underestimation of engagement
of all relevant processes and their owners into tasks for the achievement of aims
and difference between how was the fulfilment of aims actually reflected in the
fulfilment of all attributes of vision and policies of the organization.
Keywords: quality management system, implementation of management
systems, GAP analysis.
1 INTRODUCTION
Management systems represent a key element within an organization, enabling
the organization to achieve sustainable success. It is the maturity of the
management system that matters for, competitive success of the organization
with its products, processes and development of quality culture through utilising
knowledge and experience. Figure 1 points out the significance of the
management system for achieving a strategic advantage, reflected in innovations
in various areas of the organization.
2 METHODOLOGY
Audits serve for examination of suitability of an approach to the implementation
of management system. The ISO 19011 standard presents a guideline for auditing
management systems, but it does not specify explicitly any approach to the
assessment of the implementation process itself.
One of suitable approaches is provided by the GAP analysis, which is generally
aimed at retrospective evaluation of processes and interactions between
processes. An appropriate usage of the GAP analysis should result in revealing
the potential for improvement, which is present in processes and their interface,
and its purpose is to fill identified gaps through reasonable measures. (Kaplan
and Norton, 2008).
steps, i.e. the decision of the management, is therefore a key one and inadequate
performance of this step often results in inadequate effect of implementation
(Stokes 2008). It is the basic precondition for the success of application of the
quality management system application, which is the understanding of the
standard as the tool for achieving the vision of the organization. The total GAP
therefore represents a difference between the understanding and utilising the
potential of the implementation of the management system standard for the
achievement of vision and provision of sustainable success of organization.
GAP 1: Difference between how the vision and policies of the organization are
set and how adequate objectives are determined for the fulfilment of all their
attributes.
GAP 2: Difference between how objectives are formulated and how is the
measurability of all aims provided.
GAP 3: Difference between how objectives are set in the organization and how
are all these objectives actually developed into specific tasks with allocated
resources, determined dates and assigned responsibility.
GAP 4: Difference between which tasks for the achievement of objectives are
solved and how all processes and their owners, who should be actually concerned
by task solutions, are included in the solution.
GAP 5: Difference between which processes and their owners are included in the
task solutions and how are all such processes monitored and measured from the
perspective of efficiency and effectiveness in order to enable the evaluation of
task fulfilment.
GAP 6: Difference between how tasks are fulfilled and how it is reflected in the
achievement of all set objectives in the organization.
GAP 7: Difference between how was the fulfilment of objectives actually
reflected in the fulfilment of all attributes of vision and policies of the
organization.
Gaps that can be identified in individual analysed areas are caused solely by
workings of the organization’s management. Each identified gap means that the
management has a deficit in the successful control of the organization and that
the organization is not utilising the full potential of the quality management
system standard.
Feedback forming taken corrective actions going outside gaps are identified with
dashed line in figure 2. Corrective actions form part of efficiently functioning
management system which detects non-conformities in due advance and
adequately reacts to such non-conformities.
management system as a tool for fulfilling attributes of their vision and policies
feel higher benefits from the implementation of the management system
standard".
Preliminarily evaluated results showed that the average difference between
expectations from the management system implementation and benefits felt by
the organization’s management is at the level of as much as 36%.
Figure 3 shows also the average evaluation of individual differences of GAP 1
thru GAP 7. Data displayed on the y axis express statement of the management
about the difference between the 100% performance and reality. The order of
GAP 1 thru GAP 7 copies the sequence of activities in applying the management
system standard only to a certain degree.
70
Perceived difference in %
60
50
40
30
20
10
0
Total GAP1 GAP2 GAP3 GAP4 GAP5 GAP6 GAP7
GAP
Closer look at the graphic depiction reveals obviously growing trend of the
deficit, what with regard to work of the organization’s management means that:
• the perception of uncertainty of fulfilment of vision and policies attributes
by the management grows with gradual demonstration of necessary
activities in the implementation of the management system;
• the "breaking point" is in the GAP 4, when a large proportion of managers
realized underestimation of engagement of all relevant processes and their
owners into tasks for the achievement of aims;
• the highest deficit shows GAP 7, which expresses the difference between
how was the fulfilment of aims actually reflected in the fulfilment of all
attributes of vision and policies of the organization.
3 CONCLUSION
The implementation of quality management system standards should not at any
rate be the aim but only the means or a toll for the achievement of vision and
objectives formulated in organization’s policies. The management should declare
so in its commitment when making decision about the implementation of the
standard. Similarly, the engagement of stakeholders is not made for informing
them that the standard is going to be implemented, but that stakeholders are
engaged in order to achieve the objective declared in the implementation of the
management system standard.
A precondition for achieving sustainable success with the help of the quality
management system standard is that the organization’s management should
correctly understand specifics and exceptionality of its organization and used the
management system standard correctly in order to achieve the vision and
objectives specified in individual organization’s policies.
Practical benefit of the paper lies in revealing the paradox manifested in this area
in the difference between the perception of benefits from the quality management
system implementation and perception of the management system standard as a
tool for fulfilling attributes of vision and policies in the organization. From the
theoretical perspective, the results of the preliminary survey presented in paper
provided ground for further and deeper research of the issue of implementation
including approaches to the engagement of stakeholders into the process of
implementation of management systems.
Individual GAPs in the analysis should actually provide an impetus for deeper
examination and taking corrective actions. The issue of examining the suitability
of implementation of the quality management system into the organization
through the GAP analysis can be generalised also to methodologies supporting
management of the organization, such as Management by Objectives, Balanced
Scorecard, Six Sigma, Opportunity Management, Agile Management and others.
ACKNOWLEDGEMENT
The survey results reported in this paper are original and have been created
within the project VEGA 1/0363/14 “Inova ný manažment/Management of
Innovation“.
REFERENCES
Alstete, J., 2012. Challenges And Opportunities In Implementing A Knowledge
Management Road-Map. Journal of Knowledge Management Practice, Vol. 13,
No. 3, September 2012.
Davenport, T.H., 1993. Process Innovation. Reengineering Work through
Information Technology. 1993. Harward Business School Press.
EIPA, 2013. Improving Public organisations through Self-Assessment. CAF
External Feddback, 2013. CAF Resource Centre. EIPA.
Kaplan, R.S., Norton, D.P., 2008. Mastering the Management System. 2008.
Harward Business Review.
Nah, F.F.H., Lau, J.L.S., Kuang, J. 2001. Critical factors for successful
implementation of enterprise systems. Business process management Journal.
2001. Available at: http://www.csus.edu/indiv/c/chingr/criticalfactorsforerp.pdf.
Nanda, V. 2005. Quality Management System Handbook for Product
Development Companies. 2005. CRC Press Book.
Paulová, I., M kva, M., 2011. Leadership – the Key Element in Improving
Quality Management, Quality-Innovation-Prosperity, Vol. 15, no. 1, 2011, pp.
27-36.
Reid, R. D. 2010. Benefit Without a Doubt. Quality Progess. 2010. Available at:
http://asq.org/quality-progress/2010/11/benefit-without-a-doubt.html
Stokes, L. 2008. From Vision to Implementation – Instituting Your Diversity
process. Linkage. 2008. Available at: http://www.linkageinc.com/thinking/
linkageleader/Documents/Linda_Stokes_From_Vision_to_Implementation.pdf