Download as pdf or txt
Download as pdf or txt
You are on page 1of 29

TRADING

s i n c e 1 9 7 7

YOUR PROJECT PARTNER


FOR PIPELINES , BUILDING & CONSTRUCTION MATERIALS

COMPANY PROFILE

WWW.SFEIRTRADING.COM
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

TABLE OF CONTENTS

01 COMPANY PROFILE .............................................................................................. 03

02 OUR SERVICES ........................................................................................................ 05

03 OUR PRODUCTS

3.1 STEEL PIPELINES 1/2 ............................................................................................. 08

3.2 CASING AND TUBING ............................................................................................. 11

3.3 DUCTILE IRON PIPES ............................................................................................. 12

3.4 GRP PIPES .................................................................................................................... 15

3.5 GRE PIPES .................................................................................................................... 18

3.6 HDPE .............................................................................................................................. 20

3.7 MANHOLE COVER AND GRATINGS ............................................................... 21

3.8 WATER METER .......................................................................................................... 22

3.9 STEEL FITTINGS ....................................................................................................... 24

3.10 FLANGES ..................................................................................................................... 26

3.11 VALVES .......................................................................................................................... 27

04 REFERENCE LIST .................................................................................................... 28

CONTACT US

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 2


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

01 COMPANY PROFILE

SFEIR TRADING (“the Company”) was established in Lebanon in year 1977.


It started operating as a retail entity whereby its initial activities included
trading building and construction material in the Lebanese Market.

Despite significant challenges and competition in the operating marketplace,


the Company underpinned significant growth in its sales, profits and margins
and achieved record levels.

The Company expanded its business model and introduced a new product
range of steel and ductile iron pipelines, GRP and HDPE in addition to
fittings, valves and related accessories.

The Company continuously focused on developing its clients’ database and


penetrated new market segments by implementing new marketing plans
and tactics emphasizing on the following:

• Increase in its market share and differentiation from competitors;


• Maintaining high quality supply according to international standards;
• Employing a professional and experienced management team;
• Adopting a competitive pricing strategy; and
• Increasing its clients’ database through a focused and aggressive sales
force.

The Company’s international trades grew rapidly. It was capable of creating


an international database of EPC contractors, water corporations and oil
and gas authorities in the Middle East, GCC and West Africa to become the
exclusive representative of several global manufacturers in KSA, Ukraine,
Bulgaria, China, Korea, Egypt and other regions.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 3


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

The Company’s operations managed regionally through the offices in the


UAE, Lebanon and Nigeria.

In addition to the Company’s growth in expanding its clients’ base, its


geographical position and its sales figures, it focuses on being a reliable
project partner by its commitment to provide the highest quality in the
products supplied and speed in the process of responding and delivering
its clients’ requests.

SFEIR TRADING is well-connected to numerous international manufacturers


who supply the best products required by high-end industrial, mechanical
and engineering companies.

The Company prides on being a reliable project partner to its clients.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 4


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

02 OUR SERVICES

With respect to our retail line of business, SFEIR TRADING


provides advice on the ideal products to supply its clients
based on a project basis.

Our trained sales people are always ready to inspect and


assist in the selection of the items needed. Moreover, they
provide clients with technical information, different modes
of application, product comparison and other relevant
requirements.

In terms of the pipeline business, our company meets your


specifications by providing a quick service and assisting in
your needs in terms of: best pricing from suppliers, transport
and delivery services, import duties, insurance and inspection,
hence, taking the hassle out of importing goods required by
clients.

SITE SERVICES

The Site Services offered by Sfeir Trading FZC provides


assistance on pipe installation, such as site supervision or site
inspection, and site lamination. Inspection reports are filled
by our Site Service Engineer/supervisor. The reports include
Quality assurance check list (Delivery and Installation), Pipe
Deflection Report and the Hydro test Report. Our qualified
Site Engineers and supervisors extend their experience and
knowledge at the site only in advising the crew when they
face difficulties during the installation process. They advice
the contractor’s employees about the installation process.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 5


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

The site service minimizes the time of installation, waste of materials, poor
workmanship, repair works etc. The Field Service engineer fills a site service
report for each project.

The following are the check list and reports filled by Sfeir Trading Field
service and site service engineers and the report are submitted to the
client / contractor and one copy is be kept in our record.

1. Quality Assurance Check List for the Delivery and Installation


2. Pipe Deflection Report
3. Hydro Test Report

The site services department assists clients in understanding the


installations guidelines by providing the following:

Installation Presentation:
Overview the installation procedure and propose recommendations prior
to start of the installation.

Installation manual:
Provide installation manual which support the contractor on the proper
soil, handling, storage, bedding, laying, joining, backfilling and testing
procedures.

On the site training


Sfeir Trading FZC will provide the contractor a site service representative
to train on the site preparation, installation and testing.

Site visits:
Periodic visits during the period of pipe installation to insure all the
installation activities are performed properly as per standard.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 6


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

Commissioning:
The installation of the line has been successfully completed according to
standards.

Customer’s Survey:
Our representative conducts a customer feedback survey to check if there is
any room for customer service improvement.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 7


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

03 OUR PRODUCTS

3.1 STEEL PIPELINES

SFEIR TRADING represents several steel pipeline manufacturers located


internationally

Steel Pipes that we supply include the following:

• Electrical resistant welded (ERW);


• Longitudinal Welded (LSAW);
• Spiral Welded (SSAW);
• Seamless;
• Stainless Steel: Seamless & Welded;
• Galvanized; and
• Casing and Tubing: OCTG pipes (casing pipes, drill pipes, production tubing)
for all oil and gas operations;

Steel Pipes supplied are designed for the following operations:

• Gas pipeline transmission;


• Oil pipeline transmission;
• Pressure pipelines;
• Industrial transmission;
• Water supply systems; and
• Draining & cleaning operations.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 8


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

Production standards are as follows:

• Pilings: ASTM A 252;


• Water line pipes: AWWA C 200, TS 1997, DIN 2460, BS 534, UNI 6363, DIN
1626;
• Petroleum and gas line pipes: API 5L, TS 6047, DIN 17172, GOST 20295;
• Pipe Lengths:
Specifications ranging from: 6m - 16m, other production standards and
specifications can be applied on a case by case basis.

Our Straight Seam Electric Resistance Welded (ERW) pipe production range
from 1/2” upwards where the following standards are applied: AFNOR, API,
ASTM, AWWA, BS,DIN, Gost, JIS, TS, and UNI.

Coating and Lining:


The coating of pipes is fundamental for protecting the pipe against corrosive
environment and to provide a longer life. Our manufacturers apply different
types of coatings and linings in accordance with major standards in order
to fulfill our clients’ requirements.

Polyethylene Coating (Pe):


PE coating is extremely efficient against corrosive and aggressive
environments and chemical materials. PE caoting is applied in accordance
with DIN30670.

Bitumen Coating and Lining:


Bitumen coating and lining is applied in accordance with DIN2461, DIN30673,
BS41-64, BS41-47, and others.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 9


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

Epoxy Coating and Lining:


Epoxy resin is applied after the internal surface treatment is completed
in accordance with SA2 1/2 requirement. This procedure is applied with
sanitary norms and AWWA C-210.

In addition, we also apply Coal-Tar Enamel Coating and Coal-Tar Epoxy


Coating.

Temporary Rust Protection Coating and Cement-Mortar Lining provided


are in compliance with the major standards such as AWWAC-203 and BS41-
64 for coal-tar enamel coating AWWA C-2-5 for Cement-mortar lining.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 10


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

3.2 CASING AND TUBING

Production standards are as follows:

Casing and Tubing:


• Standard: API SPEC 5CT;
• Application: Tubing is used to extract petroleum and natural gas from a
well, whereas casing serves as a wall protection to the wells;
• Steel grade: J55, K55, N80, L80, C90, T95, P110;
• Range of specification: 1.900”-20”.
• Connection: VAM, HCS, TS8, UPJ, CS Hydril and equivalent.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 11


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

3.3 DUCTILE IRON PIPES

Our Ductile Iron Pipes and fittings are produced with different kind of
joints from from DN80-2000mm according to ISO2531 BS EN545 & 598
under the following production process:

• Smelting and molten iron spheroidization;


• Centrifugal casting and extraction from molds;
• Heat treatment;
• Finishing: The process includes testing and inspection in order to ensure
pipe quality. All pipes are then externally coated with metallic zinc and
sprayed with bitumen according to the ISO8179 standard;
• Cement lining: All pipes are internally centrifugal lined by cement mortar
lining according to the ISO4179 standard;
• Bitumen coating: To prevent corrosion and give the pipe a good appearance,
every ductile iron pipe is coated with bituminous paint, meanwhile
undergoing a quality inspection of the external coating.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 12


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

1. Standard dimensions and weight of N1 type joint


(K9, K7, C40, C30 class, standard effective length: 6m)
2. Standard dimensions and weight of S type joint
(K9, K7, C40, C30 class, standard effective length: 6m)
3. Standard dimensions and weight of T type joint
(K9, K7, C40, C30 class, standard effective length: 6m)

Weight and dimension table of push-on joint pipe:

Nominal Barrel of Pipe Weight of Weight of


Diameter External Wall Weight of Socket per Piece
(mm) Diameter Thickness per meter (kg) (kg)
(mm) (mm) (kg/m)

80 98 6 12.2 3.4 76.5

100 118 6.1 15.1 4.3 95

150 170 6.3 22.8 7.1 144

200 222 6.4 30.6 10.3 194

250 274 6.8 40.2 14.2 255

300 326 7.2 50.8 18.9 323

350 378 7.7 63.2 23.7 403

400 429 8.1 75.5 29.5 482

450 480 8.6 89.3 38.3 575

500 532 9 104.3 42.8 669

600 635 9.9 137.3 59.3 882

700 738 10.8 173.9 79.1 1123

800 842 11.7 215.2 102.6 1394

900 945 12.6 260.2 129.9 1691

1000 1048 13.5 309.3 161.3 2017

1200 1255 15.3 420.1 237.7 2758

1400 1462 17.1 547.2 279.8 3563

1600 1668 18.9 690.3 375.2 4517

1800 1875 20.7 850.1 490.4 5591

2000 2082 22.5 1026.3 626.2 6784

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 13


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

Mechanical Joint:
Mechanical joint has same flexibility of angular
deflection with push-on type pipe. For
dismantling, it is even easier than push-on joint.
But for installation it is not as convenient as
push-on joint.

Mechanical joint K-type is used mostly for pipes with big diameter. The
Company develops mechanical joint N-type and S-type especially for gas-
carrying pipeline. N-type is usually for low-pressure pipeline. S-type can be
used for medium pressure pipeline.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 14


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

3.4 GRP PIPES

A Fibreglass Pipe is a composite product made of glass fibers embedded


in or surrounded by thermosetting resin which is subsequently cured.
Fibreglass pipes include Glass Reinforced Polyester (GRP) pipes, Glass
Reinforced Epoxy (GRE) pipes and Glass Reinforced Vinylester (GRV) pipes.
Since the 1970s, fibreglass technology has evolved to enable fibreglass to
be used as either the pipe material of choice or a feasible alternative for
certain applications and across all end-markets, except gas transmission.
Fibreglass possesses certain physical qualities which we believe make it a
superior alternative to traditionally used pipe materials. The competitive
attributes of Fibreglass are: lightweight, durable, anti-corrosive, efficient
carrier and a versatile material.

Product Range of GRP Pipes:


GRP Pipes traded by Sfeir Trading FZC is a composite material system
produced from glass fiber reinforcements, thermosetting plastic resins, and
additives. By selecting the right amount of materials and the manufacturing
process, the designer can create a product to meet the most demanding
requirements.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 15


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

Sfeir Trading FZC is a leading trading company that deals with GRP pipes.
GRP pipes are available in nominal diameters ranging from 80mm to
4000mm. Pipes are available at different nominal pressure classes that are
PN 3, 6, 10,16, 20, and 25 bars (PN 20 and PN 25 up to ND 2000mm) with
stiffness classes of 2500, 5000, 10000, and 12500 N/m2. These pipes can
be used for both underground and above ground installations depending
whether it is a restrained type pipe system or non-restrained.

Applications:
Fiberglass pipe is used in many industries and for numerous applications
including:
Chemical processes, desalination, ducting and vents, geothermal, industrial
effluents, irrigation, oil industries, potable water, power plant cooling, raw
water, sewers, sea water intake and outfalls, slurry piping, storm sewers,
water distribution, water transmission, and in tubing and casing.

Applicable codes and standards:


ASTM D-3262, ASTM D-3517, ASTM D-3754, AWWA C-950, AWWA M-45,
and BS 5480.

Characteristics:
GRP pipes are known to be corrosion resistant, with a good strength to
weight ratio, non-conductive material, has dimensional stability, low
maintenance costs, and flexible.

Construction:

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 16


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

GRP pipe is a composite laminate consisting of three layers mainly. The first
layer is a corrosion resistant liner called the inner liner, the second layer is
the structure layer, and the external layer is a resin rich layer.

The main three raw materials are:


1. Resin
2. Glass
3. Silica Sand

In process Quality Control:


Quality control testing includes careful checks for incoming raw materials,
in process manufactured products, and finished products. All these tests
are done according to international standards such as ASTM, BS, EN, and
AWWA.

Joining systems and Fittings:


There are several types of joining systems available to GRP pipes. Many
of the systems permit angular deflection, while other joining systems are
designed to resist longitudinal thrust forces. The most common fittings
used are elbows, tees, wyes, flanges, and reducers or laterals. Some
client specifications lead to a custom designed spool making it easier for
installation.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 17


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

3.5 GRE PIPES

The Company trades Glass Fiber Reinforced Epoxy Pipes and Fittings
(GRE) in diameters ranging from 25 to 1200 mm, pressures from 10 to
32 BarG where these pipes and fittings are available in adhesive bonded,
mechanical, and laminated jointing systems.

GRE pipe systems are utilized in normal to aggressive environments with a


wide operational temperature range up to 120 Degree Celsius. The following
are standard applications for GRE products:

• Industrial Plants: chemical processing plants, fertilizer plants, food


processing industries, paper and textile industries, petrochemical plants,
sanitary and industrial sewerage plants, chemical wastes, refineries, oil and
gas lines.
• Power Plants: Raw and Potable Water lines, cooling water process lines,
sea and brine water pipelines, and fire fighting lines.
• Utilities: Agriculture, desalination plants, Reverse Osmosis plants, and
public water supply.
• GRE pipe systems can also handle heavy industrial wastes, abrasive slurries,
toxic chemicals, hazardous fluids or those for above ground or higher
temperature services.

GRE Pipe Systems are manufactured according to international standards:


AWWA C 950, AWWA M45, ASTM D 2996, ASTM D 3754, BS 5480, AND
API 5HR AND API 5LR.

GRE pipe systems have a lot of benefits and some of the advantages are:
Corrosion Resistant, light weight, extremely smooth pipe interior surface
and superior mechanical and thermal properties where design life is 50
years.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 18


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

GRE pipe systems are manufactured by Helical Discontinuous Manufacturing


Process and are produced with strict quality assurance and quality control
according to international AWWA, ISO, and ASTM standards.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 19


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

3.6 HDPE PIPES

Our HDPE Pipes and fittings are suitable for potable water. They do not
contain bacteria or any other material harmfull to human health. There are
two types of HDPE PE100 and PE32.

Advantages:
• Have a high stretch-ability, provides easier installation. The minimum
elongation at break is 600%.
• Are not affected by under ground movements, unbreakable.
• Impact resistance and high resistance to crack propagation.
• Low internal surface roughness.
• Convenient for underwater installation.
• High performance for 50 years under nominal pressure degree.
• Does not request cathodic protection.
• Resistant to chemicals.

Application Areas:
• Water Transportation
• Underground and above ground
• Irrigation systems
• Fire water systems
• Waste Water Discharge
• Deep-sea discharges

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 20


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

3.7 MANHOLE COVER AND GRATINGS

• Shape: Round, square, rectangular cover with lifting pocket, frame with
seal and lock;
• Material: Ductile iron and cast iron;
• Standards: ASTM, DIN, EN, BS, ISO;
• Proof Loads: up to D 600; and
• Coating: Epoxy, PE and bitumen painting.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 21


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

3.8 WATER METER

Water meter products are used to measure the total volume of cold potable
water and hot water flowing which is consumed in household or in resident
units, passing through the pipeline.

Some meters are made especially for heat-resistant that is used for measuring
the living water, hot water, boiler preheating water and process cooling
water. Other meters are made for dry-type water meter measuring devices
that are driven by magnetic coupling, easy reading good antifreeze property
and ability to permanently keep the reading clear.

Adopting pointer and word-wheel combination count device, with advanced


and an elegant structure. The counter is sealed by a special type of liquid and
the reading is clear for long, convenient meter copy and long service life.

Type: Rotary-vane meter, multi and single jet, volumetric, wet type and dry,
flow meter and others such as remote control, digital that is suitable for hot,
cold and potable water.
Nominal Sizes: 15mm and up.
Water Condition: Water temperature 50˚C
Working Pressure: 1 MPa

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 22


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

Water Meter Box:


Small water meter box: 30x40 cm for use in PP and galvanized connections;
Big water meter box: 30x60 cm for use in PE connections;
Depth: 15-90 cm based on order.

Advantages:
• The cover is available in plastic and cast iron in conformity with usage
conditions such as sudden temperature variation, humidity and direct sun
rays;
• Holds high resistance properties against corrosion caused by the following:
chemical factors, oil, gases, lubricants, etc.;
• Supporting bridges at the bottom;
• Resistance against bumps and strokes; and
• High capability of bearing weight.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 23


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

3.9 STEEL FITTINGS

Butt welding pipe fittings, forged steel fittings:

• Dimension Standard: Coatings:


• ANSI B16.3; • No coatings;
• BS 143 & 1256; • Hot dipped galvanized;
• DIN 2950. • Fusion bonded epoxy resin.
• API 5L • PE

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 24


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

• Carbon Steel Fittings for piping components;


• Forged or Rolled Alloy-Steel pipe Flanges, Forged fittings, valves and parts
for high-pressure and high-temperature;
• Forging Carbon and Low-Alloy Steel, requiring Notch Toughness Testing
for piping components; and
• Pipe fittings of wrought Carbon Steel and Allow Steel for Low-Temperature
Service.

CLASSIFICATIONS BY JOINT
By welding two parts’ end that have a bevel end preparation;
BW (Butt Welding)
This method is very economical to maintain large size piping

This method is usually used for small size fittings?


SW (Socket Welding)
Below 2” (50A)

Production Range:

ITEMS MOD TYPE FABRICATION TYPE


MATERIALS
ELBOW ~ 60 inch ~ 120 inch
Carbon Steel TEE ~ 60 inch ~ 120 inch

Stainless Steel REDUCER ~ 48 inch ~ 120 inch

Ally Steel CAP ~ 48 inch ~ 120 inch

Duplex Steel STUB-END ~ 16 inch ~ 60 inch

Nickel & Alloy Steel FORGED FITTING ~ 4 inch ~ 4 inch

Titanium & Zirconium OUTLET FITTING ~ 36 inch ~ 36 inch

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 25


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

3.10 FLANGES

ASTM: A105 (N), A 181 Gr, A350 Gr


Carbon Steel
JIS: SFGr

High Yield Carbon Steel ASTM A694 Gr: F42, F45, F52, F55, F60, F65, etc.

ASTM A182 G: F304 (L.H.), F316 (L.H.), F347 (H), F317 (L), F44,
Stainless Steel
etc.

Duplex & Super Duplex


ASTM A182 Gr: F51, F53, etc.
Steel

ASTM A182 Gr: F1, F5(A), F6, F9, F11, F12, F22, F91, etc.
Low Alloy Steel
AISI 4130

Nickel Alloys B564 UNS NO: 6625, 8825, etc.

Titanium ASTM B381: Gr F2 / B386

Flange Types:

WELDING NECK FLANGE THREADED (SCREWED) SLIP-ON FLANGE

LAP JOINT FLANGE BLIND FLANGE SOCKET WELDING FLANGE

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 26


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

3.11 VALVES

Valves produced include the following: BS, API, DN, EN, ASME and ISO
Standard. Bodies produced are Cast Iron, Ductile Cast Iron, Steel, Stainless
and Brass.

The main classes and types available include:


• Forged Steel valves;
• API Valves;
• Cast Iron Low Pressure;
• General Valves;
• Heat / Oxygen Valves;
• Butterfly Valves;
• Gate Valves;
• Ball Valves;
• Floating ball Valves;
• Plug Valves;
• Globe Valves; and
• Check Valves.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 27


s i n c e 1 9 7 7
WWW.SFEIRTRADING.COM YOUR PROJECT PARTNER FOR PIPELINES, BUILDING & CONSTRUCTION MATERIALS

04 REFERENCE LIST

Our reference list consists of more than hundreds of clients served in the
region and internationally within different industries in both the private and
public sectors. A detailed reference list is available upon request.

TRADING | Copyright© Sfeir Trading, 2013 - All rights reserved. 28


s i n c e 1 9 7 7
TRADING
s i n c e 1 9 7 7

YOUR PROJECT PARTNER


FOR PIPELINES , BUILDING & CONSTRUCTION MATERIALS

MAIN OFFICE
DUBAI, UAE

MOB TEL FAX

BRANCH
LEBANON

MOB TEL

e-mail: [email protected]

WWW.SFEIRTRADING.COM

You might also like