Tyit Iot Mcqs (E-Next - In)
Tyit Iot Mcqs (E-Next - In)
Unit I (1.1)
5. Define internet.
a) Inter connection of local area network
b) A waste collection of different networks
c) A single network
d) Intra connection of local area network
7. Which protocol is used by IoT Devices?
a)UDP
b) Both UDP and TCP
c) TCP
d) Neither UDP nor TCP
8. With the help of Ipv6 addressing protocol, ___________ can be connected directly to
the internet?
a) 10 Billion
b)1 million
c) None of them are correct
d)10 Million
11. Which one of the following is not one of the concerns in Internet of Things?
a) Efficiency
b)Data storage standards
c) Privacy concerns
d) Cyber Security
13. The huge number of devices connected to Internet of things have to communicate
automatically, not via humans. What is this called?
a)machine to Machine(M2M)
b)Bot to Bot (B2B)
c)InterCloud
d) Skynet
17. IOT devices should have the characteristic to be calm, ambient and ubiquitous. Which
means
a) They are not present everywhere but silently working and not seeking attention
b) They are present everywhere but not silently working and seekingattention.
c)They are present everywhere, silently working not seeking attention.
d) They are present everywhere, silently working and seeking attention.
Unit (1.2)
7. The huge number of devices connected to the Internet of Things has to communicate
automatically not via humans. What is this called?
a. Skynet
b. Bot to Bot
c. Machine to Machine
d. Intercloud
Unit I(1.3)
2. Intermediary machines, through which the data has to go throught before it reachs the
destination.
a) RAM
b) postcard
c) drivers
d) routers
4. What contains the protocols that deal with fetchingweb pages, sending emails, and
Internet telephony.
a) internet layer
b) transport layer
c) application layer
9. An IP address once assigned it won’t change again without human intervention is called
a) Static IP address
b) Standard IP address
c) Dynamic IP address
10. IPv6, which uses ______ addresses.
a) 128 bit
b) 64 bit
c) 32 bit
d) 16 bit
14. What allows you to specify exactly how many bits of the address are fixed.
a) Top level Domain(TLD)
b) Internet service provider(ISP)
c) Dynamic Host Configuration Protocol(DHCP)
d) Classless Inter-Domain Routing (CIDR)
15. If your browser requests an HTTP page, it usually sends that request to
a) port 80
b) port 934
c) port 443
d) port 08
Unit II 2.1
15.Android is ------------system
a) closed source
b) mixed source
c) open source
d) independent
Ans.copen source
16.8051 is an example of
a) microprocessor
b) soc
c) microcontroller
d) none of above
Ans.cmicrocontroller
Q14 Internet of things devices takes advantage of more tightly integrated and miniaturised
solutions – from the most basic level of microcontrollers to move powerfull ________
modules.
a)Chip
b)System-on-chip
c)Integrated circuit
d)Circuit
Answer: System-on-chip
Q15 _______i.e protocol has a very low power consumption that can be adopted and
included in phones and laptops.
a)Bluetooth
b)Router
c)Wi-Fi
d)Switch
Answer: Bluetooth
Q16 Due to Trade off in size versus manufacturing complexity, many chip design are
available in a number of different form factors known as _________.
a)Pattern
b)System
c)Packages
d)Application
Answer: Packages
Q22 _________ is the smallest and cheapest of the team’s boards, with a form factor
Comparable to that of a Raspberry Pi
a)BeagleBone Black
b)Arduino
c)Tiny OS
d)Electric Imp
Answer: BeagleBone Black
Q25 ___________ node communicate with the Twitter servers would live on the Electric
Imp server and periodically checks for new tweets.
a)Bubble Network
b)Bubblino
c)Arduino
d)Electric Imp
Answer: Bubblino
1.What method of 3D printing uses a laser to harden liquid plastic layer by layer
a) SLA
b) CLIP
c) SLS
d) CLIP
6. Which method of 3D printing uses a laser to melt a thin layer of plastic powder together?
a) SLA
b) SLS
c) FDM
d) CLIP
8. Which of the following is a free app that you can use to create files for 3D printing?
a) TinkerCad
b) SolidWorks
c) Rhino
d) AutoCad
9. A preliminary model of something from which other forms are developed or copied is
called a:
a) Polytype
b) Prototype
c) Practice run
d) Protozip
12. The action or process of making a physical object from a three-dimensional digital model,
typically by laying down many thin layers of a material in succession.
a) 3D printing
b) Laser Engraver
c) 2 Dimensional
d) Prototype
14. A slender threadlike material that is heated in a 3D printer in order to create an object.
a) filament
b) 3D print
c) revolve
d) extrude
16. which of the following axis of movement is not supported by CNC milling?
a) 3 axis
b) 4 axis
c) 5 axis
d) 7 axis
17. This part of the printer is where the melted filament is extruded onto and your object
takes shape.
a) The Print Head
b) The Filament Roll
c) The Print Plate
d) The Nozzle
18.This part of the printer is what actually gets hot and from where the filament extrudes
a) The Print Head
b) The Filament Roll
c) The Print Plate
d) The Nozzle
18. What kinds of materials can be fed into a 3D printer
a) Plastic only
b) Paper only
c) Metal only
d) Metals, plastics, powders, and other substances
19._____ methodbuilds up the model by laminating many individual sheetsof paper together .
a) fused deposition modelling
b) Laser sintering
c) Powder bed
d) Laminated object manufacturing
20.In which 3d printing method, the binder is more like a glue which is dispensed by a print
head .
a) fused deposition modelling
b) Laser sintering
c) Powder bed
d) Laminated object manufacturing
23.Which of the following feature helps to select a laser cutter for prototype design.
a) Size of the laser
b) Amount of powder taken
c) Power of the laser
d) Position of the laser
24. The width of the cut made by the laser is called ____
a) Cut
b) Hole
c) Notch
d) Kerf
26. Which of the following is not a type HINGES AND JOINTS used for prototyping in
IOT?
a) Lattice (or Living) Hinges
b) Integrated Elastic Clips
c) Bolted Tenon (or T-Slot) Joints
d) V-slot joints
29.Instead of throwing out old clothes and towels, Julia cuts the items up and uses them as
cleaning rags. This is an example of which of the following ?
a) Reduce
b) Reuse
c) Recycle
d) Remake
30.Renee has started to compost her food scraps and leaves/yard trimmings. When it all
breaks down into soil, she'll use that for her garden. This is an example of ___
a) Reduce
b) Recycle
c) Reuse
d) Source reduction
1) OS activates special reserved memory called_________ memory, when system runs out
of memory.
a) Power Memory
b) Virtual Memory
c) Real Memory
d) Shared Memory.
14) ____________ collection of a host of UNIX utilities into a single small executable and
a common and useful package to provide a simple shell environment and command on
your system
a) BusyBox
b) b) BusyBee
c) c)BeatBox
d) d)AutoBOX
16) ____________ provides program execution with read and write access to the internal
processor registers
a) compiler
b) b)Debugging
c) c) interpretation
d) d)simulator
17) In Burn and __________ method a chip is burned with device programmer and after
plugging it in into the hardware system crashes.
a)Earn
b)Learn
c) Cold
d)warm
UNIT4.2
A. 1940
B. 1930
C. 1965
D. 1960
Q. 3 one of the most popular templates for working on a business model is the_____
A. Template
B. Design
C. Boxes
D. Canvas
Q.5 One of the most popular templates for working on a business model is the Business
Model Canvas by ___________
A. Bill gates
B. Alexander Osterwalder
C. Kevin Ashton
D. Marie Curie
Q.6 ________are the people you plan to deliver the product to.
A. Customer Segments
B. People
C. Client
D. Customer relationship
Q.7 Customer Relationships might involve a lasting communication between the company
and its most passionate customers via _____.
A. Face to face
B. Twitter
C. Social Media
D. Relationship
A. Media
B. Channels
C. Medium
D. Route
Q. 9______ are the things that need to be done.
A. Key Activities
B. Core Activities
C. Key Resources
D. Channel Activities
Q. 10 _________include the raw materials that you need to create the product but also the
people who will help build it.
A. Key Activities
B. Core Activities
C. Key Resources
D. Channel Activities
Q. 11 _________requires you to put a price on the resources and activities you just defined.
A. Key Resources
B. Key Activities
C. Core Activities
D. Cost Structure
A. Structure
B. Design
C. Model
D. Pattern
A. Crowdsourcing
B. Activities
C. Resources
D. Model
A. Tuples
B. Pivots
C. Models
D. Fields
Q. 15 _______Pivot Focus on what was only a part of the value proposition, and turn that
into the whole Minimum Viable Product.
A. Zoom-out
B. Customer segment
C. Zoom-in
D. Technology
Q. 16________Pivot realise that the people who will actually buy your product aren’t the
ones you were originally targeting.
A. Zoom-out
B. Customer segment
C. Zoom-in
D. Technology
A. Zoom-out
B. Customer segment
C. Zoom-in
D. Technology
A. Merchants
B. Pedler
C. Shopmans
D. Salesman
A. million
B. billion
C. thousand
D hundred
A. Design
B. Pattern
C. Model
D. Layout
A. Code
B. Thing
C. Solution
D. Resource
Q. 22 The________needs to be written.
A. Code
B. Thing
C. Solution
D. Resource
Q. 23 Every Bubblino has a name (given to it by Adrian), but the user can also change which
phrases he listens to on______.
A. Facebook
B. WhatsApp
C. Twitter
D. Media
A. cars
B. dolls
C. statues
D. cloths
Q. 25 Before any official funding round comes the informal idea of the friends, family, and
_____(FFF) round.
A. funds
B. fact
C. fun
D. fools
UNIT 5 5.1
1. What is the first step towards selling your idea as a IOT product is to provide it as ___.
A. Kit
B. Design.
C. Logic
D. Both A and B.
3. Which possibility is the highest contributor to cost overhead for manufacturing facilities?
a) Transportation and logistics
b) Energy and utilities
c) Plant control flow operation
d) Energy management and resource optimization
5. In which view you layout the component logically and make the necessary connection
without having to worry about exactly where they will sit in Physical space.
a) Hardware view.
b) Random view.
c) Both A and B.
d) Schematic view
8. Informed _________ will better manage complexities and enable more efficient
manufacturing of goods.
a) Product
b) People
c) Processes
d) Infrastructure.
9 .Which process involved printing out the design from your PCB design software onto a
stencil?
a) Etching Boards.
b) Milling Boards.
c) Both A and B.
d) Serial boards
10.Which possibility is based on combination of materials and information flow during the
time of manufacturing?
a) Automotive.
b) Energy and utilities.
c) Transportation and logistics.
d) Connected supply chain.
11. Which possibility is the highest contributor to cost overhead for manufacturing facilities?
a) Transportation and logistics.
b) Energy and utilities.
c) Plant control flow operation.
d) Energy management and resource optimization
13. The simplest moulds are called _______and consist of the mould split into two halves.
a) Straight-pull
b) Double-pull
c) Complex mould
d) Simple mould
14. In a process known as________, you can even share parts of different colours on the
same mould.
a) Singlshotmoulding
b) Multishotmoulding
c) Doubleshotmoulding
d) Tripleshotmoulding
15. The Little Printer, made by London design firm _____, is a delightful, tiny
Internetconnected printer.
a) BERG
b) TOMM
c) KERG
d) George
17. Copying software from a development machine to where it will be run from in production
is typically known as _________.
a) Implementation
b) Deployment
c) Requirement
d) Costing
18. The ___________in the device, however, is particularly important to test, as that is the
hardest to update once the product has been sent out to the users.
a) Design
b) Software
c) Embedded Code
d) Hardware
19.HTML pages, as this could allow a _________________attack.
a) Cross-site scripting (XSS)
b) Active Attack
c) Passive Attack
d) Spoofing
Unit: 5 Chapter: 11
1.Bi-directional communication to things can lead to features that interact to the concept of
A. Privacy
B. Filter
C. Cyber attack
D. Cyber Crime
ANSWER: A
4. To enable the ________ toremain useful at the end of its working life.
A. Data
B. Network
C. Code
D. Time
ANSWER: B
7. Shipping the raw material from mine to refinery to manufacturer has its own
A. Carbon Cost
B. cost
C. Data
D. Risk
ANSWER: A
10. In the digital world, moving data rather than physical objects is faster, is safer,and has a
lower environmental cost.
A. Lower environmental cost.
B. Lower economical cost
C. Lower electricity cost.
B. Lower material cost
ANSWER: A