Scribd Logo
Upload

Welcome to Scribd!

  • Nova-M: Technical Data Sheet

    Uploaded by

    parabool
    49 views2 pages
    Nova M datasheet

    Original Title

    Abitron_Technical_Data_Sheet_NOVA-M

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    Nova M datasheet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    49 views2 pages

    Nova-M: Technical Data Sheet

    Uploaded by

    parabool
    Nova M datasheet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 2

    Technical Data Sheet NOVA-M

    General Description
    • Small, ergonomic and robust transmitter for digital and
    proportional applications
    • TÜV certified according to EN ISO 13849-1 and EN 62061
    • Key switch, stop button, toggle switches, push buttons,
    joysticks in X/Y/Z direction with digital or stepless
    functions, belly belt or neck strap
    • Receiver programming via transmitter possible (Quick-Set)
    • Standard and costomised solutions
    • Optional cable control
    • Feedback via LED and display available
    • Tandem operation optional


     
     
     

    Control Functions and Accessories


     Start button 
     Key switch
     Stop button
     Push button
     Toggle switch
     Joystick
     LED status display
     Battery monitoring
     Original ABITRON battery charger and battery

    www.abitronremote.com
    Technical Data Sheet NOVA-M
    Safety Precautions
    Attention: Make sure that you have read and fully understood the manuals to both the safety radio
    remote control and the machine to be operated prior to commissioning!
    Always check if the stop function is working properly before operating the machine.
    Please check the following points prior to each machine operation!
     Inspect the transmitter for possible damage
     Check the function of the stop button  by means of the LED status display 
    (Transmitter on: LED flashes / if stop button is activated: LED flashes faster)
     You will hear an audible signal when activating the transmitter (default setting)

    Transmitter Operation
    The transmitter may only be operated by trained and authorised personnel! Insert a fully charged battery
    into the battery compartment on the bottom of the transmitter. Start the transmitter by turning the key switch .
    The LED status display   must flash green now and a buzzing sound will confirm the system check (approx. 2 se-
    conds). After the startup procedure you can start the system with the start button . With the joystick  and the
    push button   or the toggle switch  you can activate the designated function. The activated functions are now
    being transmitted to the receiver. The specific functions of the buttons/switches are described in the enclosed drawing!
    You can stop the system by engaging the stop button  (conduct only in case of emergency).
    LED status display: Flashing = Transmitter is ready for operation
    Buzzer: An interval signal gives notice in case of low battery voltage. After approx. 30 seconds the
    transmitter will shut down.

    Technical Data
    Material polyamide with glass fibre
    Weight approx. 1000 g
    Diagnostics status LED
    RF technology synthesizer
    RF output < 10 mW
    Temperature range -25 up to +70° C
    Antenna internal
    Frequency range 434/869 MHz (for EU, other frequencies upon request)
    Safety address 20 bit (1 Mio.)
    Protection type IP 65
    Operating time 20 hours and more
    Power supply 3,6 VDC

    Dimensions D = 110 mm
    W = 170 mm
    © Copyright ABITRON Germany GmbH 2016-02-26

    H = 160 mm

    www.abitronremote.com

    You might also like