Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    Data Sheet 6ES7322-5FF00-0AB0: Supply Voltage

    Uploaded by

    Quy Hoang

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content

    Data Sheet 6ES7322-5FF00-0AB0: Supply Voltage

    Uploaded by

    Quy Hoang
    21 views2 pages

    Original Title

    6ES73225FF000AB0_datasheet_en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    21 views2 pages

    Data Sheet 6ES7322-5FF00-0AB0: Supply Voltage

    Uploaded by

    Quy Hoang

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 2

    Data sheet 6ES7322-5FF00-0AB0

    SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 120/230 V AC, 2A,
    with single rooting/channel and selectable failure mode, 1x 40-pole

    Supply voltage
    Load voltage L1
    ● Rated value (AC) 230 V; 120/230 V AC
    ● permissible range, lower limit (AC) 79 V
    ● permissible range, upper limit (AC) 264 V
    Input current
    from load voltage L1 (without load), max. 2 mA
    from backplane bus 5 V DC, max. 100 mA
    Power loss
    Power loss, typ. 8.6 W
    Digital outputs
    Number of digital outputs 8
    Short-circuit protection Yes; to be provided externally; fuse 3.15 A / 250 V, quick response
    Controlling a digital input Yes
    Size of motor starters according to NEMA, max. Size 5 according to NEMA
    Zero-crossing switch Yes; 60 V
    Switching capacity of the outputs
    ● on lamp load, max. 50 W
    Output voltage
    ● for signal "1", min. L1 (-8.5 V)
    Output current
    ● for signal "1" rated value 2A
    ● for signal "1" permissible range for 0 to 40 °C, min. 10 mA
    ● for signal "1" permissible range for 0 to 40 °C, max. 2A
    ● for signal "1" permissible range for 40 to 60 °C, min. 10 mA
    ● for signal "1" permissible range for 40 to 60 °C, 1A
    max.
    ● for signal "1" minimum load current 10 mA
    ● for signal "1" permissible surge current, max. 20 A; with 2 half waves
    ● for signal "0" residual current, max. 2 mA
    Parallel switching of two outputs
    ● for uprating No
    ● for redundant control of a load Yes
    Switching frequency
    ● with resistive load, max. 10 Hz
    ● with inductive load, max. 0.5 Hz
    ● with inductive load (acc. to IEC 60947-5-1, AC15), 0.5 Hz
    max.
    ● on lamp load, max. 1 Hz

    6ES73225FF000AB0 Subject to change without notice


    5/20/2022
    Page 1/2 © Copyright Siemens
    Total current of the outputs (per group)
    horizontal installation
    — up to 40 °C, max. 8A
    — up to 60 °C, max. 4A
    vertical installation
    — up to 40 °C, max. 4A
    Cable length
    ● shielded, max. 1 000 m
    ● unshielded, max. 600 m
    Interrupts/diagnostics/status information
    Diagnostics function Yes; Parameterizable
    Alarms
    ● Diagnostic alarm Yes; Parameterizable
    Diagnostics indication LED
    ● Group error SF (red) Yes
    ● Status indicator digital output (green) Yes
    Potential separation
    Potential separation digital outputs
    ● between the channels Yes
    ● between the channels, in groups of 1
    ● between the channels and backplane bus Yes; Optocoupler
    Isolation
    Isolation tested with 1 500 V AC
    connection method / header
    required front connector 40-pin
    Dimensions
    Width 40 mm
    Height 125 mm
    Depth 120 mm
    Weights
    Weight, approx. 275 g

    last modified: 1/16/2021

    6ES73225FF000AB0 Subject to change without notice


    5/20/2022
    Page 2/2 © Copyright Siemens

    You might also like