Home Bin Composting
Home Bin Composting
Introduction
Home Composting is not a new technology and it has been practiced for many years around the world, as a simple and low cost solution to manage household organic waste at source. In Sri Lanka, different set-ups of household composting units can be found and it has been more popularised in some areas. Compost offers several benefits such as enhanced soil fertility and soil health-thereby increased agricultural productivity, improved soil biodiversity, reduced ecological risks and a better environment. Home composting is now being encouraged as a means of reducing the organic waste being discarded and sent to the landfills. In Sri Lanka, organic fraction of Municipal Solid Waste (MSW) contributes 70 - 90% of total waste stream in many municipalities. These organic substances are bulky to handle and contributes for numerous liquid and gaseous emissions that deteriorate dumpsite environments. A good home composting programmes can significantly reduce the quantity of organic waste adding to the mainstream (>50%) and subsequent emissions upon final disposal. Valuable products (compost) are produced while reducing the costs incurred for collection, transportation and final disposal at dumpsite. Community participation has been a vital component in most successful integrated solid waste management (ISWM) programmes. Home composting encourages the community involvement on waste management activities and it facilitates easy transferring of source separation concepts to the people. Home based composting compared to the compost produced from mixed waste is of high quality as the waste does not get contaminated with hazardous materials. The separated inorganic materials need less effort for cleaning before recycling. Therefore, household composting has been identified as an option to enhance the economic conditions of urban poor people through home-gardening and selling of compost and/or recyclables. There are various technical options available as household level composting systems that vary from simple pit /heap methods to complex bin or rotating drum designs. Traditional composting methods (pit, heap, Jeewakotu) have been common practices in many rural/ peri-urban areas with different kinds of organic matters. Most urban dwellers prefer bin composting system due to its convenience and as it has less impact an aestheticism with their very limited space.
Practical Action
So composting has been a vital component in many integrated waste management plans that is developing worldwide.
Practical Action
Plate: Different composting bin designs available in Sri Lanka. Credit: Practical Action South Asia
As mentioned before, composting bins are popular in urban areas with emerging solid waste disposal problems and therefore, it is important to give proper guidance to the community in using composting bins. It is identified that some technical and management problems have been the main constraints in popularising the composting bin among citizens. The bin design should facilitate the composting process with easy management practices. Therefore, standard bin design should focus on; Easy transportation and installation: Good aeration (sufficient aeration for all parts of the bin - aeration hole diameter - < 1cm) Drain the excess moisture (porous bottom pad) Protect from external whether conditions, mainly rain, winds (proper cover or lid) Retain the temperature inside (dimensions of the bin and material used for constructing) Easy adding and mixing of waste ( proper height ,easy handling lid) Easy removal of compost (size and number of compost removing doors) Keeps away from the pest like rats, dogs crows etc. Durability of the bin (material used, strength etc) As management practices, more care should be taken on selecting suitable materials for composting. In most systems, 98% of the biodegradable can be composted without much problem. But in urban areas, as there are space limitations any form of malfunction in the composting process can lead to environmental issues in the surroundings. Malfunctions are caused primarily when non-degradable materials are added to the composting bin. (Table: 1)
Practical Action
Table: 1 Things to be composted and excluded from composting bin Materials to include Vegetables/kitchen refuses Garden trimmings, grass clippings Leaves, dry leaves (straw) Twigs and shredded branches Food refuses :bread, buns etc Egg shells Farm animal manure (e.g. Cow, Sheep, Goat , Poultry) Fruit refuses Wood ash Materials to exclude Non biodegradable waste: polythene, plastics, glass, metal etc. Human faeces, pet manure(e.g. dog, cat) Dairy Products Diseased plants Fish , meat scraps and bones Slow degradable materials like coconut shells, coconut husk, komba etc. Fats/cooking oils Hazardous material like batteries, bulbs, electronic components, chemicals
Practical Action
Troubleshooting
Table: 2 Common problems, causes and solutions for composting bin users Problems Possible Causes Solution Materials in the bin not decomposing or not heating up at all. Not enough nitrogen Not enough oxygen Not enough moisture Make sure you have enough nitrogen rich sources like manure, grass clippings or food scraps. Mix up the materials in the bin, so that it can breathe. Add some water to the bin and make sure there is enough moisture for composting process. Avoid adding thick layers of same material. Use of one substrate alone does not provide balance nutrients for microbes. Eg. Leaves, paper, grass clippings. Therefore, shred and mixe such material with other material to help composting easy and faster. Break up the layers and mix the materials in the bin. Mix up the bin for aeration so that it can breathe. Add course dry materials like straw, hay or leaves to soak excess moisture. Add dry materials and mix well, if it creates an unpleasant odour. Adjust the moisture by adding dry materials or ash. Locate the bin in a sunny place. Heat helps to destroy fly larvae, weed seeds and other pathogens. Switch to a fly-proof closed bin with enough aeration. Add brown materials like dried leaves, straw, hay, shredded paper, etc. Do not add inappropriate materials to a compost bin (large scale). Switch to a rodent-proof safe bin.
Inappropriate materials like meat, dairy products Bin is too wet Poor aeration
Odour like ammonia. Attracts rodents, flies, or other animals (rats, crows, dogs etc.)
Not enough carbon. Inappropriate materials (like meat, oil, bones), Material like fresh food is too close to the surface of the bin. This is normal in composting and part of the natural degradation process.
Sometimes become a problem. Use proper bin design which can keep away from household pest like cockroaches, slugs, spiders
Practical Action
Table: 3. Advantages and disadvantages of composting bins Advantages Disadvantages Management practices are easy since it eliminates external weather conditions. Minimum animal/pest attractions due to safe bin designs. Improve hygiene conditions of the surrounding environment. Takes less space in the garden. The unit is movable and can locate on any place in the garden Aesthetically good looking Some poor designs stops contribution of soil micro-organisms and earthworms to the degradation process. High cost for purchasing(Rs. 1000/- to 2500/-) Improper/poor designs create problems and therefore it can discourage bin users. Need proper maintenance ( if proper moisture level is not maintained unpleasant odour, and vermin problems will occur)
Compost collection can be commenced 2-3 months after starting the bin. The time taken for composting depends on the material added to the bin and maintenance practices that are followed. Removed compost must heap up outside (1-2 weeks) for maturation. This reduces the phytotoxic compounds in the compost. In order to obtain a uniform product, this compost is sent through a 4 mm mesh. Oversize particles can be sent back to the bin for further decomposition.
Practical Action
Table: 4 Important Quality standards for compost (Sri Lanka Standards SLS 1246:2003) PROPERTIES REQUIREMENTS Physical parameters: Colour Keeping properties Moisture content Odour Particle size Sand content Nutrient requirement : Nitrogen Phosphorous Potassium C:N ratio Heavy metals Cadmium Chromium Copper Lead Mercury Nickel zinc Biological parameters: Faecal coli forms Salmonella Viable weed seeds
Brown / grey to dark black Not less than 12 months under room temperature Not more than 25% by dry weight Not unpleasant odours Residue should be <2% through 4 mm sieve <10% Minimum requirement 1.0% 0.5% 1.0% 10-25 max ppm (maximum parts per million) 10 1000 400 250 02 100 1000 Requirement Should be free Should be free < 16 per square metre
Practical Action
B) Design modification in concrete bin Design modifications were done with considering the scientific requirement of the composting process and practical problems experienced by the users.
When bin designs were identified at the beginning, it did not include aeration holes in the bottom ring. Aeration is a critical factor for composting process and as a result, delayed composting and bad odour problems were identified.
Practical Action
Design Improvements for a solid lid is important for easy handling and to prevent pests entering. Prior to the solids lids, there were galvanized lids that were of light weight. These lids did not cover the bins properly as they were not steady. Therefore, a thin concrete lid was designed to cover the bin well so that the lid would not fall off. As these concrete lids are solid, it keeps away from pest and prevents any rain water entering.
In the new design, all breakable components are reinforced with irons which help to withstand under rough handling. Therefore, it gives extra strength to the new bin with three compost removing doors. Rats entering the bin was a major problem that was encountered before in earlier designs with poorly fitted doors. The modified design includes a simple locking system to keep the bin door tightly closed to prevent any pests entering the bin. In the new design, each ring is well fitted with interlocking groves. This minimises displacing of rings with mixing and other management activities. It also keeps minimum space to protect from snails and cockroaches.