Tandex Pty. LTD.: Process Water Division

Page 1 of 3
Page 1 of 3
Issue 5: 24-Apr-2002
TANDEX PTY. LTD. Issue 5: 24 April 2002
Product: Biocide LF2
ABN. 97 004 905 971 File: MSDS WT083
File: Msds WT083
PO Box 166, Bayswater VIC 3153 AUSTRALIA
Melb - Ph: (61-3) 9729.6722 Melb Fax: (61-3) 9720.5896
Syd - Ph: (61-2) 9316.5908 Syd Fax: (61-2) 9316.5984
THIS PRODUCT IS CLASSIFIED AS HAZARDOUS ACCORDING TO CRITERIA OF WORKSAFE

AUSTRALIA
IDENTIFICATION
PRODUCT NAME: Biocide LF2
OTHER NAMES: Corrosive Liquid N.O.S.
MANUFACTURER'S PRODUCT WT0835 - 5L, WT08315 - 15L, WT08320 - 20L, WT083205 - 205L
CODE:
U.N. NUMBER: 1760
DANGEROUS GOODS CLASS AND Class 8
SUBSIDIARY RISK:
PACKAGING GROUP: III
HAZCHEM CODE: 2R
POISONS SCHEDULE NUMBER: S5
USE: Biocidal additive for cooling water systems.
METHOD OF APPLICATION: Dosing pump, drip feeder or manual dosing.
PHYSICAL DESCRIPTION / PROPERTIES
APPEARANCE: Light straw colored liquid, distinctive odor. Packed in 5, 15, 20 and 205
litre plastic lined drums.
BOILING / MELTING POINT: Above 1000C
VAPOUR PRESSURE (PASCALS or Not relevant.
mm of HG at 25 OC):
SPECIFIC GRAVITY: 1.018
PH (1% solution) 6.1
O
FLASHPOINT ( C): Product is non-flammable.
FLAMMABILITY LIMITS (%): Not relevant.
SOLUBILITY IN WATER (g/L): Fully miscible.
INGREDIENTS
CHEMICAL ENTITY: CAS NUMBER PROPORTION
Isothiazoles 31075-24-8 <10%
Balance of components are non-hazardous and comprise proprietary information.
The information contained herein to the

PROCESS best of our ability is believed to be true and
correct. However, no representation,
WATER warranty or guarantee is made as to the

suitability of any product for any particular
application. Clients are requested to
DIVISION conduct their own trials to prove the
acceptability of a product for their use.
Page 2 of 3
File: MSDS WT083
HEALTH HAZARD
ACUTE HEALTH EFFECTS
SWALLOWED: Poisonous if swallowed.
EYE: Corrosive to eyes.
SKIN: Will cause skin irritation.
INHALED: Avoid excessive inhalation.
CHRONIC HEALTH The effects of chronic exposure to Biocide LF2 have not been fully evaluated. As
EFFECTS: with any chemical, good occupational work practice should be implemented to
avoid ingestion, inhalation, skin or eye contact.
FIRST AID
SWALLOWED: Do not induce vomiting. Rinse mouth and throat with water immediately. Dilute
stomach contents with a glass of water. Never administer fluids to an
unconscious person. Take individual to nearest medical facility.
EYE: Flush immediately and thoroughly with copious amounts of clean tap water or
saline (minimum 15 minutes). Take exposed individual to health care professional.
Preferably an opthamologist for further evaluation.
SKIN: Wash exposed area with plenty of soap and water for at least 15 minutes. Remove
contaminated clothing and wash thoroughly. If irritation persists contact a doctor.
INHALED: Move affected person to fresh air. In case of shortness of breath, administer
oxygen and obtain medical assistance. Avoid becoming a casualty.
FIRST AID FACILITIES: Normal washroom facilities, water, soap, eye wash and shower.
ADVICE TO DOCTOR: No specific antidote is known. Treat symptomatically.
PRECAUTIONS FOR USE
EXPOSURE STANDARDS: Not available.
VENTILATION: Use in a well ventilated room. Local exhaust recommended.
PERSONAL PROTECTION: P.V.C. or rubber gloves, safety glasses/goggles, Rubber boots & approved half
face filter respirator suitable for organic vapours recommended. Wash hands
thoroughly with soap and water after handling.
FLAMMABILITY: Product is non-flammable.
Hazchem: 2R
SAFE HANDLING INFORMATION
STORAGE AND Store in sealed containers in cool, dry, well-ventilated storage away from sunlight
TRANSPORT: and extremes of temperature. Area should be constructed with suitable flooring
and bunding designed to fully contain spills.
Dangerous Goods Class 8 - must be stored and transported in accordance with
dangerous goods regulations.
Page 3 of 3
File: MSDS WT083
SPILLS AND DISPOSAL:

LARGE SPILLS: Dam area to prevent spill entering drainage system. Pump into appropriate
containers and dispose of in accordance with local regulations.
SMALL SPILLS: Dilute and absorb in an inert solid such as sand, clay or vermiculite and shovel into
heavy-duty polythene bags or corrosion proof containers.
FIRE/EXPLOSION HAZARD: Product is non-flammable.
Hazchem 2R.
Water should be used to cool surrounding containers.
Extinguishing media: Dry chemical, water foam, or carbon dioxide.
Hazardous decomposition products: None known.
CONTACT POINT:
POLICE & FIRE BRIGADE: Dial 000
IF INEFFECTIVE: Dial 1100 (Exchange)
FOR SPECIALIST ADVICE Technical Manager Ms Michelle Lawler (03) 9729 6722
CONTACT: After hours 0418 383 332
Disclaimer - All information given in this data sheet and by the company's technical staff is compiled from the best
information currently available to the company. The company accepts no responsibility whatsoever for its accuracy
or for any results which may be obtained by customers. Any customer who relies upon any advice or information
given in this data sheet by the company or by its technical staff does so entirely at its own risk, and the company will
not be liable for any loss or damage thereby suffered not with standing any want of care on the part of the company
or its staff in compiling or giving the advice or information.

Tandex Pty. LTD.: Process Water Division

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tandex Pty. LTD.: Process Water Division

Uploaded by

Copyright:

Available Formats

Page 1 of 3

THIS PRODUCT IS CLASSIFIED AS HAZARDOUS ACCORDING TO CRITERIA OF WORKSAFE

The information contained herein to the

WATER warranty or guarantee is made as to the

SPILLS AND DISPOSAL:

You might also like