Professional Documents
Culture Documents
MAC1-Relevant-Costing-Analysis SET OF PROBLEMS
MAC1-Relevant-Costing-Analysis SET OF PROBLEMS
yes yes no
b. yes no no
1. Which of the following is not a characteristic of relevant costing c. no no yes
information? It is d. yes yes yes
a. associated with the decision under consideration.
b. significant to the decision maker.
c. readily quantifiable. ANS: D DIF: Easy OBJ: 10-2
d. related to a future endeavor.
11. In deciding whether an organization will keep an old machine or
purchase a new machine, a manager would ignore the
ANS: C DIF: Easy OBJ: 10-1 a. estimated disposal value of the old machine.
b. acquisition cost of the old machine.
c. operating costs of the new machine.
2. A fixed cost is relevant if it is d. estimated disposal value of the new machine.
a. a future cost.
b. Avoidable.
c. sunk. ANS: B DIF: Easy OBJ: 10-2
d. a product cost.
12. The potential rental value of space used for production activities
a. is a variable cost of production.
ANS: B DIF: Easy OBJ: 10-1 b. represents an opportunity cost of production.
c. is an unavoidable cost.
3. Relevant costs are d. is a sunk cost of production.
a. all fixed and variable costs.
b. all costs that would be incurred within the relevant range of production.
c. past costs that are expected to be different in the future. ANS: B DIF: Easy OBJ: 10-3
d. anticipated future costs that will differ among various alternatives.
13. The opportunity cost of making a component part in a factory with
ANS: D DIF: Easy OBJ: 10-1 excess capacity for which there is no alternative use is
a. the total manufacturing cost of the component.
4. Which of the following is the least likely to be a relevant item in b. the total variable cost of the component.
deciding whether to replace an old machine? c. the fixed manufacturing cost of the component.
a. acquisition cost of the old machine d. zero.
b. outlay to be made for the new machine
c. annual savings to be enjoyed on the new machine
d. life of the new machine ANS: D DIF: Easy OBJ: 10-3
14.Which of the following are relevant in a make or buy decision?
ANS: A DIF: Easy OBJ: 10-2
Variable Avoidable fixed Unavoidable fixed
5. If a cost is irrelevant to a decision, the cost could not be costs costs costs
a. a sunk cost.
b. a future cost. a. no yes yes
c. a variable cost. b. yes no yes
d. an incremental cost. c. no no yes
d. yes yes no
7. The term incremental cost refers to ANS: A DIF: Easy OBJ: 10-3
a. the profit foregone by selecting one choice instead of another.
b. the additional cost of producing or selling another product or service. 16. Which of the following are relevant in a make or buy decision?
c. a cost that continues to be incurred in the absence of activity.
d. a cost common to all choices in question and not clearly or feasibly allocable to any
Prime
of them.
costs Sunk costs Incremental costs
1
c. the product contribution margin.
19. When a scarce resource, such as space, exists in an organization, the d. the total variable cost per unit.
criterion that should be used to determine production is
a. contribution margin per unit.
b. selling price per unit. ANS: C DIF: Easy OBJ: 10-7
c. contribution margin per unit of scarce resource.
d. total variable costs of production. 28. An increase in direct fixed costs could reduce all of the following
except
a. product line contribution margin.
ANS: C DIF: Easy OBJ: 10-4 b. product line segment margin.
c. product line operating income.
20. Fixed costs are ignored in allocating scarce resources because d. corporate net income.
a. they are sunk.
b. they are unaffected by the allocation of scarce resources.
c. there are no fixed costs associated with scarce resources. ANS: A DIF: Easy OBJ: 10-7
d. fixed costs only apply to long-run decisions.
29. When a company discontinues a segment, total corporate costs may
decrease in all of the following categories except
ANS: B DIF: Easy OBJ: 10-4 a. variable production costs.
b. allocated common costs.
21. The minimum selling price that should be acceptable in a special order c. direct fixed costs.
situation is equal to total d. variable period costs.
a. production cost.
b. variable production cost.
c. variable costs. ANS: B DIF: Easy OBJ: 10-7
d. production cost plus a normal profit margin.
30. In evaluating the profitability of a specific organizational segment, all
_______________ would be ignored.
ANS: C DIF: Easy OBJ: 10-6 a. segment variable costs
b. segment fixed costs
22. Which of the following costs is irrelevant in making a decision about a c. costs allocated to the segment
special order price if some of the company facilities are currently idle? d. period costs
a. direct labor
b. equipment depreciation
c. variable cost of utilities ANS: C DIF: Easy OBJ: 10-7
d. opportunity cost of production
31. Knox Company uses 10,000 units of a part in its production process.
The costs to make a part are: direct material, $12; direct labor, $25;
ANS: B DIF: Easy OBJ: 10-6 variable overhead, $13; and applied fixed overhead, $30. Knox has
received a quote of $55 from a potential supplier for this part. If Knox
23. The _______________ prohibits companies from pricing products at buys the part, 70 percent of the applied fixed overhead would continue.
different amounts unless these differences reflect differences in the Knox Company would be better off by
cost to manufacture, sell, or distribute the products. a. $50,000 to manufacture the part.
a. Internal Revenue Service b. $150,000 to buy the part.
b. Governmental Accounting Office c. $40,000 to buy the part.
c. Sherman Antitrust Act d. $160,000 to manufacture the part.
d. Robinson-Patman Act
ANS: C
ANS: D DIF: Easy OBJ: 10-6 Cost to make: $55/unit * 10,000 units = $550,000
Cost to manufacture: $(12+25+13+9)= $59/unit
24. An ad hoc sales discount is Incremental difference in favor of buying: $4/unit * 10,000 units
a. an allowance for an inferior quality of marketed goods. = $40,000
b. a discount that an ad hoc committee must decide on.
c. brought about by competitive pressures.
d. none of the above. DIF: Moderate OBJ: 10-3
32. Paulson Company has only 25,000 hours of machine time each month
ANS: C DIF: Moderate OBJ: 10-6 to manufacture its two products. Product X has a contribution margin of
$50, and Product Y has a contribution margin of $64. Product X
25. A manager is attempting to determine whether a segment of the requires 5 hours of machine time, and Product Y requires 8 hours of
business should be eliminated. The focus of attention for this decision machine time. If Paulson Company wants to dedicate 80 percent of its
should be on machine time to the product that will provide the most income, the
a. the net income shown on the segment's income statement. company will have a total contribution margin of
b. sales minus total expenses of the segment. a. $250,000.
c. sales minus total direct expenses of the segment. b. $240,000.
d. sales minus total variable expenses and avoidable fixed expenses of c. $210,000.
the segment. d. $200,000.
26. Assume a company produces three products: A, B, and C. It can only X: 20,000 hrs/5 hrs 4,000 units * $50 $200,000
sell up to 3,000 units of each product. Production capacity is unlimited. per unit CM/unit
The company should produce the product (or products) that has (have)
Y: 5,000 hrs/8 hrs 625 units * $64 40,000
the highest
per unit CM/unit
a. contribution margin per hour of machine time.
Total $240,000
b. gross margin per unit.
======
c. contribution margin per unit.
d. sales price per unit.
DIF: Difficult OBJ: 10-7
ANS: C DIF: Easy OBJ: 10-7
33. Doyle Company has 3 divisions: R, S, and T. Division R's income
27. For a particular product in high demand, a company decreases the statement shows the following for the year ended December 31:
sales price and increases the sales commission. These changes will
not increase Sales $1,000,000
a. sales volume. Cost of goods sold (800,000)
b. total selling expenses for the product.
2
Gross profit $ 200,000 =======
Selling expenses $100,000
Administrative expenses 250,000 DIF: Moderate OBJ: 10-3
Net loss
Cost of goods sold is 75 percent variable and 25 percent fixed. Of the 36. Browning Company has 15,000 units in inventory that had a production
fixed costs, 60 percent are avoidable if the division is closed. All of the cost of $3 per unit. These units cannot be sold through normal
selling expenses relate to the division and would be eliminated if channels due to a significant technology change. These units could be
Division R were eliminated. Of the administrative expenses, 90 percent reworked at a total cost of $23,000 and sold for $28,000. Another
are applied from corporate costs. If Division R were eliminated, Doyle’s alternative is to sell the units to a junk dealer for $8,500. The relevant
income would cost for Browning to consider in making its decision is
a. increase by $150,000. a. $45,000 of original product costs.
b. decrease by $ 75,000. b. $23,000 for reworking the units.
c. decrease by $155,000. c. $68,000 for reworking the units.
d. decrease by $215,000. d. $28,000 for selling the units to the junk dealer.
ANS: C ANS: B
Sales foregone $(1,000,000) Only the actual reworking costs are relevant. Original purchase
COGS avoided costs are irrelevant.
Variable $600,000
Fixed 120,00 720,000
0 DIF: Easy OBJ: 10-3
Selling Expense Avoided 100,000
Administrative Expense Avoided 25,000 Robertson Corporation
Decrease in income $( 155,000)
========= Robertson Corporation sells a product for $18 per unit, and the
standard cost card for the product shows the following costs:
ANS: C 45. Refer to Woodville Motors. The estimated $500 salvage value of the
The lowest price would have to be greater than the existing machine in 10 years represents a(n)
sum of all variable manufacturing costs. a. sunk cost.
Variable manufacturing costs total $17; therefore the b. opportunity cost of selling the existing machine now.
price would have to be greater than $17 per pair. c. opportunity cost of keeping the existing machine for 10 years.
d. opportunity cost of keeping the existing machine and buying the new machin
4
48. Refer to Entertainment Solutions Corporation. Assume that the Existing machine New
remaining Model A1 radios can be sold through normal channels or to machine
a foreign buyer for $6 per unit. If sold through regular channels, the Original cost $200,000 $400,000
minimum acceptable price will be Market value now 80,000
a. $30. Market value in year 5 0 20,000
b. $33. Annual cash operating
40,000 10,000
c. $10. costs
d. $4. Remaining life 5 yrs. 5 yrs.
ANS: C 52. Refer to Richmond Steel Corporation. The major opportunity cost
$10 will cover the price to the foreign buyer plus the $4 in variable associated with the continued use of the existing machine is
selling expenses. a. $30,000 of annual savings in operating costs.
b. $20,000 of salvage in 5 years on the new machine.
c. lost sales resulting from the inefficient existing machine.
DIF: Moderate OBJ: 10-5 d. $400,000 cost of the new machine.
54. Refer to Richmond Steel Corporation. If the company buys the new
49. Refer to Chip Division of Computer Solutions, Inc. Assume, for this machine and disposes of the existing machine, corporate profit over
question only, that the Chip Division is producing and selling at the five-year life of the new machine will be ____________________
capacity. What is the minimum selling price that the division would than the profit that would have been generated had the existing
consider on a "special order" of 1,000 chips on which no variable machine been retained for five years.
period costs would be incurred? a. $150,000 lower
a. $100 b. $170,000 lower
b. $72 c. $230,000 lower
c. $81 d. $150,000 higher
d. $94
ANS: A
ANS: D Annual savings in operating costs $ 150,000
Variable period costs are $6 ($15 * 40% variable) Purchase of new machine (400,000)
The minimum selling price would have to be greater than the Disposal of existing machine 80,000
manufacturing costs and fixed period costs. Disposal of new machine in 5 years 20,000
$(100 - 6) = $94 per unit Difference in profit $(150,000)
========
ANS: A Hamilton Company has offered to sell Emerald 5,000 units of Part
The price would have to cover all variable costs. 10541 for $19 a unit. Emerald has determined that it could use the
$(50 + 20 + 2 + 6) = $78 per unit facilities currently used to manufacture Part 10541 to manufacture Part
RAC and generate an operating profit of $4,000. Emerald has also
determined that two-thirds of the fixed overhead applied will continue
DIF: Moderate OBJ: 10-6 even if Part 10541 is purchased from Hamilton. To determine whether
to accept Hamilton’s offer, the net relevant costs to make are
51. Refer to Chip Division of Computer Solutions, Inc. Assume, for this a. $70,000.
question only, that the Chip Division is presently operating at a level of b. $84,000.
80,000 chips per year. Accepting a "special order" on 2,000 chips at c. $90,000.
$88 will d. $95,000.
a. increase total corporate profits by $4,000.
b. increase total corporate profits by $20,000.
c. decrease total corporate profits by $14,000. ANS: B
d. decrease total corporate profits by $24,000. The relevant costs are the variable costs per unit as well as the portion
of fixed overhead that will be avoided for Part 10541.
Variable costs = $14 per unit
ANS: B Fixed overhead = $ 2 per unit
$(88 - 78) = $10 profit per unit * 2,000 units = $20,000 profit 5,000 units * $16 per unit = $80,000 + Profit from RAC = $ 4,000
increase Total Relevant Costs $84,000
5
56. Harding Corporation manufactures batons. Harding can manufacture
300,000 batons a year at a variable cost of $750,000 and a fixed cost ANS: A DIF: Easy OBJ: 10-8
of $450,000. Based on Harding's predictions, 240,000 batons will be
sold at the regular price of $5.00 each. In addition, a special order was 65. Which of the following variables is associated with the "less than or
placed for 60,000 batons to be sold at a 40 percent discount off the equal to" constraints?
regular price. The unit relevant cost per unit for Harding's decision is
a. $1.50. Surplus Slack
b. $2.50.
c. $3.00. a. yes yes
d. $4.00. b. yes no
c. no yes
d. no no
ANS: B
The relevant costs will be the variable costs per unit.
$750,000/300,000 units = $2.50/unit ANS: C DIF: Easy OBJ: 10-8
ANS: C DIF: Easy OBJ: 10-8 ANS: C DIF: Easy OBJ: 10-8
58. A linear programming problem can have 67. The graphical approach to solving a linear programming problem
a. no more than three resource constraints. becomes much more complex when there are more than two
b. only one objective function.
c. no more than two dependent variables for each constraint equation. constraints decision variables
d. no more than three independent variables.
a. yes no
b. no yes
ANS: B DIF: Easy OBJ: 10-8 c. yes yes
d. no no
59. A linear programming model must
a. have only one objective function.
b. have as many independent variables as it has constraint equations. ANS: C DIF: Easy OBJ: 10-8
c. have at least two dependent variables for each equation.
d. consider only the constraints that can be expressed as inequalities. 68. The feasible region for a graphical solution to a profit maximization
problem includes
a. all vertex points.
ANS: A DIF: Easy OBJ: 10-8 b. all points on every resource constraint line.
c. the origin.
60. In a linear programming problem, constraints are indicated by d. all of the above.
a. the independent variables.
b. the dependent variables in the constraint equations.
c. the coefficients of the objective function. ANS: C DIF: Easy OBJ: 10-8
d. iso-cost lines.
Uncommon Products Corporation
ANS: B DIF: Easy OBJ: 10-8 In the two following constraint equations, X and Y represent two
products (in units) produced by the Uncommon Products Corporation.
61. The feasible region for an LP solution is
a. defined only by binding constraints on the optimal solution. Constraint 1: 3X + 5Y < 4,200
b. defined as the solution space that satisfies all constraints. Constraint 2: 5X + 2Y > 3,000
c. identified by iso-cost and iso-profit lines.
d. identified by all of the above. 69. Refer to Uncommon Products Corporation. What is the maximum
number of units of Product X that can be produced?
a. 4,200
ANS: B DIF: Easy OBJ: 10-8 b. 3,000
c. 600
62. A linear programming solution d. 1,400
a. always involves more than one constraint.
b. always involves a corner point.
c. is the one with the highest vertex coordinates. ANS: D
d. is provided by the input-output coefficients. 1,400 units is the only amount that will not cause Constraint 1 to be
violated.
6
c. both constraints.
d. neither constraint.
ANS: D DIF: Easy OBJ: 10-1
ANS: A
This solution would yield a result of 4,500; this violates Constraint SHORT ANSWER
1.
DIF: Easy OBJ: 10-8 1. What are three characteristics of relevant information?
72. One constraint in an LP problem is: 12X + 7Y > 4,000. If the optimal ANS:
solution is X = 100 and Y = 500, this resource has Relevant information must be: (1) associated with the decision under
a. slack variable of 700. consideration; (2) be important to the decision maker; and (3) have a
b. surplus variable of 700. connection to or bearing on some future endeavor.
c. output coefficient of 700.
d. none of the above. DIF: Easy OBJ: 10-1
ANS: B
The solution to the constraint is 4,700, a surplus variable of 2. Why is depreciation expense irrelevant to most managerial decisions,
700. even when it is a future cost?
ANS:
Depreciation expense is simply the systematic write-off of a sunk cost
73. Consider the following linear programming problem and assume that (the cost of a long-lived asset). Depreciation expense is therefore
non-negativity constraints apply to the independent variables: always irrelevant unless it pertains to an asset that is not yet acquired.
ANS:
DIF: Moderate OBJ: 10-8
Segment margin is the amount of income that remains after deducting
all avoidable (both variable and fixed) costs from sales. This measure
74. Contracting with vendors outside the organization to obtain or acquire
is the appropriate gauge of a segment's viability because it is a direct
goods and/or services is called
measure of how total organizational profits would change if the
a. target costing.
segment was discontinued.
b. insourcing.
5. What is the relationship between scarce resources and an
c. outsourcing.
organization's production capacity?
d. product harvesting.
ANS:
In the long run, capacity is likely to be constrained by two fundamental
ANS: C DIF: Easy OBJ: 10-3
resources: labor and machinery. However, in the short run, additional
constraints can push capacity to levels below labor and machine
75. Which of the following activities within an organization would be least
capacity. Constraints can be induced by raw material shortages,
likely to be outsourced?
interruptions in distribution channels, labor strikes in the plants of
a. accounting
suppliers of important components, or governmental restrictions on
b. data processing
markets (gas rationing, Quotas).
c. transportation
d. product design
DIF: Moderate OBJ: 10-4
7
Outsourcing occurs when an organization "farms out" some of its 1. Refer to Agri-Magic Corporation. Assume that the current date is
normal business activities or processes. Several areas that are most March 15. On this date, Agri-Magic must make a decision as to
frequently outsourced by an organization include payroll, accounting, whether it is financially better off to plant a certain farm with corn or
transportation, and possibly legal. When a company outsources some leave the land idle (no income is derived from idle land). Corn prices
of its functions, it is able to divert more energy to those areas that have been severely depressed in recent years and Agri-Magic’s best
produce a firm's core competencies or have the ability to create guess is that corn prices will be around $2.00 per bushel at the time
revenues for the firm. the crop is ready for harvest. Should the company plant corn or leave
the land idle? Explain.
DIF: Moderate OBJ: 10-3
9. What are some factors that a company must consider when ANS:
deciding to raise or lower sales prices on products? The company should make their decision by comparing the
incremental income from planting the corn crop to the incremental
ANS: expenses that would be incurred to grow, harvest, and market the
Quantitative factors include the new contribution margin per unit of the crop. The incremental revenue is simply the $2.00 per bushel and the
product, short-term and long-term changes in demand and production incremental costs are all variable costs ($1.10 + $0.40 + $0.30 + $0.10
volume because of the price change, and the best use of a company’s = $1.90). Based on this comparison, the company would be $13 per
scarce resources. acre better off to plant than to let the land remain idle.
Qualitative factors include the impact of changes on customer goodwill
toward the company, customer loyalty toward company products, and DIF: Moderate OBJ: 10-3
competitors’ responses to the firm’s new pricing structure.
2. Refer to Agri-Magic Corporation. Assume for this question only that the
DIF: Moderate OBJ: 10-5 company decided to plant the corn. A local oil refiner has approached
the company about converting the crop to grain alcohol (used to make
PROBLEM gasohol) rather than selling the grain to the local grain elevator. If Agri-
PROBLEM Magic converts the grain to alcohol, it will incur additional costs of
$0.60 per bushel, and the company will be able to sell the crop to the
Agri-Magic Corporation oil refiner for the equivalent of $2.50 per bushel. Otherwise, the
company can sell the corn crop to the local grain elevator for $1.85 per
Agri-Magic Corporation grows corn in rural areas of the South. Agri- bushel. If Agri-Magic elects to sell the grain to the refinery, the
Magic's costs per bushel of corn (based on an average yield of 130 company will not incur the variable selling costs. What should the
bushels per acre) follow: company do? Support your answer with calculations.
3.
Refer to Agri-Magic Corporation. Assume that the current date is March 15. On this date, Agri-Magic Corporation must make a decision as to whether it is
financially better off to plant a certain farm to corn, leave the land idle (no income is derived from idle land), or rent the land to another farmer for $50 per
acre. Corn prices have been severely depressed in recent years and Agri-Magic Corporation's best guess is that corn prices will be around $2.00 per
bushel at the time the crop is ready for harvest. What should the company do? Show calculations.
ANS:
It has already been determined (answer to Problem #1) that planting corn is preferred to leaving the land idle (by $13 per acre). By renting the land, Agri-
Magic Corporation is even better off. Under the rental alternative, Agri-Magic Corporation is $37 per acre better off than if he plants corn ($50 - $13). By
renting the land, the company avoids all costs except the fixed production costs ($0.60 per bushel or $78 per acre).
4. New Iberia Corporation makes and sells the "Tabasco Maiden”, a wall hanging depicting a magical pepper plant. The Tabasco Maidens are sold at
specialty shops for $50 each. The capacity of the plant is 15,000 Maidens per year. Costs to manufacture and sell each wall hanging are as follows:
New Iberia Corporation has been approached by an Texas company about purchasing 2,500 Tabasco Maidens. The company is currently making and
selling 15,000 per year. The Texas company wants to attach its own Lone Star label, which increases costs by $.50 each. No selling expenses would be
incurred on this order. The corporation believes that it must make an additional $1 on each Tabasco Maiden to accept this offer.
a. What is the opportunity cost per unit of selling to the Texas company?
b. What is the minimum selling price that should be set?
ANS:
a. Opportunity cost = Selling price minus total variable costs $50 - ($5 + $6 + $8 + $2.50) = $28.50
8
Extra amount required to accept offer 1.00
Minimum price $49.00
5. Mighty Mike’s Accounting Service provides two types of services: audit and tax. All company personnel can perform either service. In efforts to market its
services, Mighty Mike relies on radio and billboards for advertising. Information on Mighty Mike's projected operations for the coming year follows:
Audit Taxes
Revenue per billable hour $35 $30
Variable cost of professional labor 25 20
Material cost per billable hour 2 3
Allocated fixed costs per year 100,000 200,000
Projected billable hours 14,000 10,000
ANS:
6. The management of Whalen Industries has been evaluating whether the company should continue manufacturing a component or buy it from an outside
supplier. A $100 cost per component was determined as follows:
Direct material $ 15
Direct labor 40
Variable manufacturing overhead 10
Fixed manufacturing overhead 35
$100
Whalen Industries uses 4,000 components per year. After Wilfert Corporation submitted a bid of $80 per component, some members of management felt
they could reduce costs by buying from outside and discontinuing production of the component. If the component is obtained from Wilfert Corporation,
Whalen Industries' unused production facilities could be leased to another company for $50,000 per year.
Required:
a. Determine the maximum amount per unit Whalen Industries could pay an outside supplier.
b. Indicate if the company should make or buy the component and the total dollar difference in favor of that
alternative.
c. Assume the company could eliminate one production supervisor with a salary of $30,000 if the component
is purchased from an outside supplier. Indicate if the company should make or buy the component and the
total dollar difference in favor of that alternative.
ANS:
Direct material $2
Direct manufacturing labor 3
9
Manufacturing overhead 5
$10
The unit manufacturing overhead cost is based on a variable cost per unit of $2 and fixed costs of $30,000 (at full capacity of 10,000 units). The non-
manufacturing costs, all variable, are $4 per unit, and the selling price is $20 per unit. A customer, Jacksonville Company, has asked Baxter to produce
2,000 units of a modification of JKL to be called RST. RST would require the same manufacturing processes as JKL. Jacksonville Company has offered
to share equally the non-manufacturing costs with Baxter. RST will sell at $15 per unit.
Required:
a. What is the opportunity cost to Baxter of producing the 2,000 units of RST (assume that no overtime is
worked)?
b. The Graves Company has offered to produce 2,000 units of JKL for Brown, so Brown can accept the
Jacksonville offer. Graves Company would charge Baxter $14 per unit for the JKL. Should Baxter accept
the Graves Company offer?
c. Suppose Baxter had been working at less than full capacity producing 8,000 units of JKL at the time the
RST offer was made. What is the minimum price Baxter should accept for RST under these conditions
(ignoring the $15 price mentioned previously)?
ANS:
a. JKL
SP $20
- VC (11) ($2 + $3 + $2 + $4)
= CM $ 9 2,000 units = $18,000
RST
SP $15
- VC (9) ($2 + $3 + $2 + $2)
= CM $ 6 x 2,000 units = 12,000
Opportunity cost $ 6,000
b. Make ($15 - $14) = $1 2,000 units = $2,000 without giving up any current production = DO IT.
c. The variable cost to make and sell = $11 ($2 + $3 + $2 + $4) would be the minimum. Any price over $11
would increase the contribution margin.
The firm's production, marketing, and administration costs at its normal capacity are:
Per Unit
Direct material $1.00
Direct labor 2.00
Variable overhead 1.50
Fixed overhead
($450,000/150,000 units) 3.00
Variable marketing costs 1.05
Fixed marketing and administrative costs
($210,000/150,000 units) 1.40
Total $9.95
Required:
a. Compute the firm's operating income before income taxes if the firm produced and sold 110,000 units.
b. For the current year, the firm expects to sell the same number of units as it sold in the prior year.
However, in a trade newspaper, the firm noticed an invitation to bid on selling LM to a state government.
There are no marketing costs associated with the order if Davis is awarded the contract. The company
wishes to prepare a bid for 40,000 units at its full manufacturing cost plus $ 0.25 per unit. How much
should it bid? If Davis is successful at getting the contract, what would be its effect on operating income?
c. Assume that the company is awarded the contract on January 2, and in addition it also receives an order
from a foreign vendor for 40,000 units at the regular price of $15 per unit. The foreign shipment will require
the firm to incur its normal marketing costs. The government contract contains a 10-day escape clause
(i.e., the firm can reject the contract within 10 days without any penalty). If the firm accepts the
government contract, overtime pay at 1 1/2 times the straight time rate will be paid on the 40,000 units. In
addition, fixed overhead will increase by $60,000 and variable overhead will behave in its normal pattern.
The company has the capacity to produce both orders. Decide the following:
1. Should the firm accept the foreign offer? Show the effect on operating income of accepting the order.
2. Assuming the foreign order is accepted, should the firm accept the government order? Show the effect on
operating income of accepting the government order.
aNS:
10
Bid $7.75
SP $7.75
- VC (4.50)
CM $3.25 40,000 units = $130,000 increase in operating income.
c. 1. SP $15.00
- VC (6.55) ($1 + $3 + $1.50 + $1.05)
CM $ 8.45 40,000 = $338,000
- FC (60,000)
Increase in Operating Income $278,000
2. Both orders can be accepted even if the increased costs of $40,000 for labor and $60,000 for fixed
overhead are assigned to the government order.
9. Thomas Wilson operates a woodworking shop that makes tables and chairs. He has 25 employees working 40 hours per week, and he has 750 hours
per week available in machine time. Wilson knows that he must make at least four chairs for every table. He has also determined the following additional
requirements:
Write the objective function and constraints for the above problem.
ANS:
Objective function: Max CM 18X + 4Y
X = # of tables
Y = # of chairs
11