Psa 500 Note
Psa 500 Note
Appropriateness is the measure of the quality of audit evidence, that is, its relevance
and its reliability in providing support for the conclusions on which the auditor's opinion is based.
The reliability of evidence is influenced by its source and by its nature. It is dependent on the
individual circumstances under which it is obtained.
PSA 330 requires the auditor to conclude whether sufficient appropriate audit evidence has
been obtained. Whether sufficient appropriate evidence has been obtained to reduce audit risk to
an acceptably low level and thereby enable the auditor to draw reasonable conclusions on which
to base the auditor's opinion, is again a matter of professional judgment.
PSA 200 contains discussions of such matters as the nature of audit procedures, the
timeliness of financial reporting and the balance between benefit and cost which are relevant
factors when the auditor exercises professional judgment regarding whether sufficient appropriate
audit evidence has been obtained.
Cumulative In Nature
More assurances ordinarily obtained from consistent audit evidence obtained from
different sources or of a different nature than from items of audit evidence considered
individually. For example, corroborating information obtained from a source independent of the
entity may increase the assurance the auditor obtains from audit evidence that is generated
internally such as evidence existing within the accounting records, minutes of meetings or a
management representation.
Information from sources independent of the entity that the auditor may use as an audit
evidence may include confirmations from third parties, analysts’ reports and comparable data
about competitors otherwise known as benchmarking data.
Inspection of tangible assets may provide reliable audit evidence with respect to their
existence but not necessarily about the entity’s rights and obligations or the valuation of the
assets. Inspection of individual inventory items may accompany the observation of inventory
counting.
Observation
• Observation consists of looking at the process or procedure being performed by others.
For example, the auditor's observation of inventory counting by the entities personnel or
of the performance of control activities.
• Observation provides audit evidence about the performance of a process or procedure but
is limited to the point in time at which the observation takes place and by the fact that the
act of being observed may affect how the process or procedure is performed.
PSA 501 provides further guidance on the observation of the counting of inventory.
External Confirmation
• External confirmation represents audit evidence obtained by the auditor as a direct
written response to the auditor from a third party or the confirming party in paper form
or by electronic or other medium.
• External confirmation procedures frequently are relevant when addressing assertions
associated with certain account balances and their elements. However, external
confirmations need not be restricted to account balances only. For example, the auditor
may request confirmation of the terms of agreements or transactions an entity has with
third parties. The confirmation request may be designed to ask if any modifications have
been made to the agreement and if so, what the relevant details are.
• External confirmation procedures also are used to obtain audit evidence about the
absence of certain conditions. For example, the absence of a signed agreement that may
influence revenue recognition.
Recalculation
• Recalculation consists of taking the mathematical accuracy of documents or records
• Recalculation may be performed manually or electronically. Needless to say, performing
recalculations using computers and applications is far more convenient and accurate than
manual procedures.
Re-performance
• Re-performance involves the auditor's independent execution of procedures or controls
that were originally performed as part of the entity's internal control. This is usually done
to determine whether the controls are effective and adequate. For example, the auditor may,
with the assistance of IT personnel, produce their invoices from the same day used by
the live billing system to verify the system produces accurate invoices.
Analytical procedures
• Analytical procedures consist of evaluations of financial information made by a study of
plausible relationships among both financial and non-financial data. You may be are more
familiar with the term financial analysis
• Analytical procedures also encompass the investigation of identified fluctuations and
relationships that are inconsistent with other relevant information or deviate significantly
from predicted amounts.
Responses to inquiries may provide the auditor with information not previously
possessed or with corroborative audit evidence. Alternatively, responses might provide
information that differs significantly from other information that the auditor has already
obtained. For example, information regarding the possibility of management override of
controls.
In some cases, responses to inquiries provide a basis for the auditor to modify or perform
additional audit procedures. Although, collaboration of evidence obtained through inquiry is
often of particular importance. In the case of inquiries about management intent, the
information available to support management's intent may be limited. In these cases,
understanding management's past history of carrying out its stated intentions, management's
stated risks for choosing a particular course of action and management's ability to pursue
a specific course of action may provide relevant information to corroborate the evidence
obtained through inquiry.
In respect of some matters, the auditor may consider it necessary to obtain written
representations from management and where appropriate those charts with governance to
confirm responses to oral inquiries. PSA 580 provides further guidance on written
representations
For example, inspection of documents related to the collection of receivables after the period
end may provide audit evidence regarding existence and valuation, but not necessarily cutoff.
Similarly, obtaining audit evidence regarding a particular assertion, for example, the existence of
inventory, is not a substitute for obtaining audit evidence regarding another assertion, for example,
the valuation of that inventory. On the other hand, audit evidence from different sources or of a
different nature may often be relevant to the same assertion.
Test of controls and substantive procedures
Tests of controls are designed to evaluate the operating effectiveness of controls in preventing,
or detecting and correcting, material misstatements at the assertion level.
Designing tests of controls to obtain relevant audit evidence includes identifying conditions
(characteristics or attributes) that indicate performance of a control, and deviation conditions
which indicate departures from adequate performance. The presence or absence of those conditions
can then be tested by the auditor.
Substantive procedures are designed to detect material misstatements at the assertion level.
They comprise tests of details and substantive analytical procedures. Designing substantive
procedures includes identifying conditions relevant to the purpose of the test that constitute a
misstatement in the relevant assertion.
Reliability of Audit Evidence
The reliability of information to be used as audit evidence, and therefore of the audit evidence
itself, is influenced by its source and its nature, and the circumstances under which it is obtained,
including the controls over its preparation and maintenance where relevant. Therefore,
generalizations about the reliability of various kinds of audit evidence are subject to important
exceptions.
Even when information to be used as audit evidence is obtained from sources external to the
entity, circumstances may exist that could affect its reliability. For example, information obtained
from an independent external source may not be reliable if the source is not knowledgeable, or a
management’s expert may lack objectivity.
While recognizing that exceptions may exist, the following generalizations about the
reliability of audit evidence may be useful:
⚫ The reliability of audit evidence is increased when it is obtained from independent sources
outside the entity.
⚫ The reliability of audit evidence that is generated internally is increased when th related
controls, including those over its preparation and maintenance, imposed by the entity are
effective.
⚫ Audit evidence obtained directly by the auditor (for example, observation of the application
of a control) is more reliable than audit evidence obtained indirectly or by inference (for
example, inquiry about the application of a control).
⚫ Audit evidence in documentary form, whether paper, electronic, or other medium, is more
reliable than evidence obtained orally (for example, a contemporaneously written record of a
meeting is more reliable than a subsequent oral representation of the matters discussed).
⚫ Audit evidence provided by original documents is more reliable than audit evidence provided
by photocopies or facsimiles, or documents that have been filmed, digitized or otherwise
transformed into electronic form, the reliability of which may depend on the controls over
their preparation and maintenance.
PSA 520 (Redrafted) provides further guidance regarding the reliability of dat used for purposes
of designing analytical procedures as substantive procedures.
PSA 240 (Redrafted) deals with circumstances where the auditor has reason to believe that a
document may not be authentic, or may have been modified without that modification having been
disclosed to the auditor.
Paragraph 8 states that responsibilities of the auditor when planning to use the work of
management's experts including the internal auditors. The purpose is to ascertain the reliability of
information produced by such experts.
The preparation of an entity’s financial statements may require expertise in a field other than
accounting or auditing, such as actuarial calculations, valuations, or engineering data. The entity
may employ or engage experts in these fields to obtain the needed expertise to prepare the financial
statements. Failure to do so when such expertise is necessary increases the risks of material
misstatement.
When information to be used as audit evidence has been prepared using the work of a
management’s expert, the requirement in paragraph 8 of this PSA applies. For example, an
individual or organization may possess expertise in the application of models to estimate the fair
value of securities for which there is no observable market. If the individual or organization applies
that expertise in making an estimate which the entity uses in preparing its financial statements, the
individual or organization is a management’s expert and paragraph 8 applies. If, on the other hand,
that individual or organization merely provides price data regarding private transactions not
otherwise available to the entity which the entity uses in its own estimation methods, such
information, if used as audit evidence, is subject to paragraph 7 of this PSA, but is not the use of
a management’s expert by the entity.
The nature, timing and extent of audit procedures in relation to the requirement in paragraph 8 of
this PSA, may be affected by such matters as:
⚫ The nature and complexity of the matter to which the management’s expert relates.
⚫ The risks of material misstatement in the matter.
⚫ The availability of alternative sources of audit evidence.
⚫ Whether the management’s expert is employed by the entity, or is a party engaged by it to
provide relevant services.
⚫ The extent to which management can exercise control or influence over the work of the
management’s expert.
⚫ Whether the management’s expert is subject to technical performance standards or other
professional or industry requirements.
⚫ The nature and extent of any controls within the entity over the management’s expert’s work.
⚫ The auditor’s knowledge and experience of the management’s expert’s field of expertise.
⚫ The auditor’s previous experience of the work of that expert.
Competence relates to the nature and level of expertise of the management’s expert.
Capability relates the ability of the management’s expert to exercise that competence in the
circumstances. Factors that influence capability may include, for example, geographic location,
and the availability of time and resources.
Objectivity relates to the possible effects that bias, conflict of interest or the influence of others
may have on the professional or business judgment of the management’s expert. The competence,
capabilities and objectivity of a management’s expert, and any controls within the entity over that
expert’s work, are important factors in relation to the reliability of any information produced by a
management’s expert
Information regarding the competence, capabilities and objectivity of a management’s expert may
come from a variety of sources, such as:
Safeguards may reduce such threats, and may be created either by external structures (for
example, the management’s expert’s profession, legislation or regulation), or by the management’s
expert’s work environment (for example, quality control policies and procedures).
When evaluating the objectivity of an expert engaged by the entity, it may be relevant to
discuss with management and that expert any interests and relationships that may create threats to
the expert’s objectivity, and any applicable safeguards, including any professional requirements
that apply to the expert; and to evaluate whether the safeguards are adequate.
In the case of a management’s expert engaged by the entity, there will ordinarily be an
engagement letter or other written form of agreement between the entity and that expert.
Evaluating that agreement when obtaining an understanding of the work of the
management’s expert may assist the auditor in determining the appropriateness of the following
for the auditor’s purposes:
⚫ The nature, scope and objectives of that expert’s work;
⚫ The respective roles and responsibilities of management and that expert; and
⚫ The nature, timing and extent of communication between management and that expert,
including the form of any report to be provided by that expert.
In the case of a management’s expert employed by the entity, it is less likely there will be
a written agreement of this kind. Inquiry of the expert and other members of management may be
the most appropriate way for the auditor to obtain the necessary understanding.
Paragraph 9 the responsibilities of the auditor when using information produced by the entity
In order for the auditor to obtain reliable audit evidence, information produced by the entity
that is used for performing audit procedures needs to be sufficiently complete and accurate. For
example, the effectiveness of auditing revenue by applying standard prices to records of sales
volume is affected by the accuracy of the price information and the completeness and accuracy of
the sales volume data. Similarly, if the auditor intends to test a population (for example, payments)
for a certain characteristic (for example, authorization), the results of the test will be less reliable
if the population from which items are selected for testing is not complete.
Obtaining audit evidence about the accuracy and completeness of such information may be
performed concurrently with the actual audit procedure applied to the information when obtaining
such audit evidence is an integral part of the audit procedure itself. In other situations, the auditor
may have obtained audit evidence of the accuracy and completeness of such information by testing
controls over the preparation and maintenance of the information. In some situations, however, the
auditor may determine that additional audit procedures are needed.
In some cases, the auditor may intend to use information produced by the entity for other audit
purposes. For example, the auditor may intend to make use of the entity’s performance measures
for the purpose of analytical procedures, or to make use of the entity’s information produced for
monitoring activities, such as internal auditor’s reports. In such cases, the appropriateness of the
audit evidence obtained is affected by whether the information is sufficiently precise or detailed
for the auditor’s purposes. For example, performance measures used by management may not be
precise enough to detect material misstatements.
Requirement number three selecting items for testing to obtain audit evidence
Paragraph 10 reads when designing tests of controls and tests of details, the auditor shall be
determined means of selecting items for items for testing that are effective in meeting the purpose
of the audit procedure.
An effective test provides appropriate audit evidence to an extent that, taken with other
audit evidence obtained or to be obtained, will be sufficient for the auditor’s purposes. In selecting
items for testing, the auditor is required by paragraph 7 to determine the relevance and reliability
of information to be used as audit evidence;
The application of any one or combination of these means may be appropriate depending on
the particular circumstances. For example, the risk of material misstatement related to the assertion
being tested and the practicality and efficiency of the different means.
A. SELECTING ALL ITEMS 100 PERCENT EXAMINATION- the auditor may decide
that it will be most appropriate to examine the entire population of items that make up a
class of transactions or account balance or a stratum within that population.
100 examinations are unlikely in the case of test of controls. However it is more
common for tests of details.
100 examinations may be appropriate when:
• For example, the population constitutes a small number of large value
items.
• There is a significant risk and other means do not provide sufficient
appropriate audit evidence
• The repetitive nature of a calculation or other process performed
automatically by an information system makes a 100 examination cost
effective.
B. SELECTING SPECIFIC ITEMS- the auditor may also decide to select specific items
from a population. In making this decision factors that may be relevant include:
• The auditor's understanding of the entity
• The assessed risks of material misstatement
• Characteristics of that population being tested
If the auditor has chosen right sample and still makes the faulty conclusion due to other
reasons, it is known to be a non-sampling risk.
Auditors here have mistakenly used the inappropriate procedure for judging the entire
sample which leads him to make the non-sampling risk.
If the sample which he has selected is not correct, situation is said to result in sample risk
while if he had picked the right sample but have not applied the correct procedure, then the
situation will be referred to as the non-sampling risk.
The sample which the auditor selected to judge the whole population should be reasonable.
Just picking up the right sample is not enough. The auditor also has to apply a correct procedure
to make a good judgment of the sample. The wrong procedure will increase the non-sampling risk
which has the greatest impact on the financial statement and cause it to be a misleading
presentation of the entire firm.
2. Misinterpret the audit evidence- when the procedure auditor has supplied is
correct but he did not properly understand the evidence
• All items over a certain amount- the auditor may decide to examine items whose
recorded values exceed a certain amount so as to verify a large proportion of the
total amount of a class of transactions or account balance.
• Items to obtain information- the auditor may examine items to obtain information
about matters such as the nature of the entity or the nature of transactions.
Requirement 4
Inconsistency in, or doubts over reliability of audit evidence
Paragraph 11 states if:
a) Audit evidence obtained from one source is inconsistent with that obtained from
another
b) If the auditor has doubts over the reliability of information to be used as audit
evidence, the auditor shall determine what modifications or additions to audit
procedures are necessary to resolve the matter and shall consider the effect of the
matter, if any, on other aspects of the audit.
Obtaining audit evidence from different sources or of a different nature may indicate that
an individual item of audit evidence is not reliable such as when audit evidence obtained from one
source is inconsistent with that obtained from another.
This may be the case when for example, responses to inquiries of management, internal
audit and others are inconsistent or when responses to inquiries of those charged with governance
made to corroborate the responses to inquiries of management are inconsistent with the response
by management.
PSA 213- includes a specific documentation requirement if the auditor identified information that
is inconsistent with the auditor's final conclusion regarding a significant matter.
APPLICATION OF PSA REQUIREMENTS
The requirements of PSA 500 regarding audit evidence affect the preliminary assessment
and this response phase as these requirements focus on the design and perform functions.
• Design of audit procedures to obtain sufficient and appropriate evidence is done
right at the end of the preliminary risk assessment phase when the auditor has
identified and assessed the risks of material misstatements related to the audit
engagement.
• Performance of the audit procedure happens at the risk response phase. In recovery
of audit evidence by performing the design audit procedures, the auditor will be
able to see firsthand the appropriateness or quality of these evidences and make
necessary professional judgments or adjustments on what will constitute sufficient
evidence.
This might also result to performance of new or the procedures that will
bring in additional information which might not have been planned during the
design stage
• Inconsistencies in the audit evidence will likewise come to the form when the
auditor compares the information of the gathered on its evidence and again this
might result to additional or new audit procedures that will bring in new or
additional information not planned for during the design stage.
PSA 500- the objective of the auditor is to design and perform audit procedures in such a way as
to enable him to obtain sufficient appropriate audit evidence to be able to draw reasonable
conclusions on which to base his opinion. Audit evidence may come from various sources but the
primary means is the audit procedures designed and performed by the auditor. These evidences
must be relevant and reliable.
Relevance deals with the logical connection with or bearing upon the purpose of the audit
procedure and where appropriates the assertion under consideration. While the reliability of
information to be used as audit evidence, and therefore of the audit evidence itself is influenced
by its source and its nature and the circumstances under which is obtained including the controls
over its preparation and maintenance where they are relevant.