Auramix 200: High Performance PCE Based Admixture For Wide Range of Concrete Grades
Auramix 200: High Performance PCE Based Admixture For Wide Range of Concrete Grades
Provides higher strength without increase in cement content The optimum dosage of Auramix 200 to meet specific require-
or reduction in workability. Ideal for precast concrete ment should always be determined by conducting laboratory
production. and batch trials. However the normal dosage ranges between
0.3 to 1.5 precent by weight of total cement or binder content.
Reduce rate of workability loss normally associated with
super plasticiser. Reduces shrinkage cracking because Dosage beyond Limits:
of lower water cement ratio. Makes the concrete water
Dosage beyond limits can be used to meet particular mix re-
impermeable.
quirements in consultation with Fosroc technical department.
Better resistance to Carbonation.
Effect of over dosage:
Reduce Shrinkage and Creep.
Over dosage may cause delay in setting and segregation.
Increase Durability.
Estimating
Standard Compliance
Packaging:
Auramix 200 complies to IS:9103 as a water reducing and
Auramix 200 is available in 240kg, 250kg drums and bulk
retarding type , BS:5075 and ASTM C 494 Type G.
tankers.
Description
Storage
Auramix 200 is a unique combination of new generation super
Auramix 200 has a minimum shelf life of 12 months provided
plasticizer based on polycarboxilic ether polymer with long
the temperature is kept within range of 20C and 500C.
lateral chain. Electrostatic dispersion mechanism considerably
reduces the water demand in flowable concrete. It is supplied
as a light brown liquid, instantly dispersible in water.
page 1 of 2
Auramix 200
Important note :
Fosroc products are guaranteed against defective materials and manufacture and are sold
subject to its standard terms and conditions of sale, copies of which may be obtained on
request. Whilst Fosroc endeavours to ensure that any advice, recommendation, specification
or information it may give is accurate and correct, it cannot, because it has no direct or
continuous control over where or how its products are applied, accept any liability either
Fosroc Chemicals directly or indirectly arising from the use of its products whether or not in accordance with
any advice, specification, recommendation or information given by it.
(India) Pvt. Ltd.
Head Office telephone fax e-mail
Embassy Point, No. 150,
2nd Floor, Infantry Road, +91 80-42521900 +91 80-22281510 [email protected]
Bangalore 560 001,
Karnataka
Regional Offices
www.fosroc.com
page 2 of 2 INDIA/2022/0133/B