Scribd Logo
Upload

Welcome to Scribd!

  • Product Detail - 700d - English - 2

    Uploaded by

    Athan Thea
    186 views2 pages
    The document provides specifications for the Moonsung CD Stud Welding Machine Model MS-700D. It can weld up to 3.2mm thick materials and operates on 220V AC power. It uses capacitor discharge welding with a 4 second recharge time and controls output voltage between 10-165V. Key components include a 198,000uF capacitor, 20A recharging current, and digital display. It is suitable for welding insulated materials like vehicle frames and is designed for indoor or outdoor use from -10C to 40C.

    Original Description:

    Specification

    Original Title

    Product Detail -700d - English - 2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    The document provides specifications for the Moonsung CD Stud Welding Machine Model MS-700D. It can weld up to 3.2mm thick materials and operates on 220V AC power. It uses capacitor discharge welding with a 4 second recharge time and controls output voltage between 10-165V. Key components include a 198,000uF capacitor, 20A recharging current, and digital display. It is suitable for welding insulated materials like vehicle frames and is designed for indoor or outdoor use from -10C to 40C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    186 views2 pages

    Product Detail - 700d - English - 2

    Uploaded by

    Athan Thea
    The document provides specifications for the Moonsung CD Stud Welding Machine Model MS-700D. It can weld up to 3.2mm thick materials and operates on 220V AC power. It uses capacitor discharge welding with a 4 second recharge time and controls output voltage between 10-165V. Key components include a 198,000uF capacitor, 20A recharging current, and digital display. It is suitable for welding insulated materials like vehicle frames and is designed for indoor or outdoor use from -10C to 40C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 2

    2 SPECIFICATION

    MOONSUNG CD STUD WELDING MACHINE

    Specification Standard Name MS-700D

    Power Rated Input Voltage (V) AC 220V (Over 1.25SQ)


    Range of Rated Input Voltage -15% ~ +10%
    Rated Frequency 50/60Hz
    Range of Available Frequency (%) 4%
    Welding Method Capacitor Discharge
    First Control OP Amp Voltage Control
    Second Control S.C.R (Turn on)
    Recharge Time (Sec) 4 Sec
    Range of Recharge Voltage DC 10V ~ DC165V
    Recharge Capacity (μF) 198,000 (μF)
    Recharge Current (A) 20A
    Maximum Welding (mm) 3.2mm
    Output Cable (GUN) 38SQ - 20m
    Output Cable (Ground) 60SQ – 5m
    Display Digital
    Protection Excess Current First 20A (NFB)
    Indoor, Outdoor
    Environment Place
    (Absent from Gas, Oil)
    Temperatuer -10℃ ~ +40℃
    Under 90%
    Moisture
    (Free from Dew)
    Total Length – 440
    Shape Width – 250
    Height - 245
    Power – 25 kg
    Weight (kg)
    Cable – 23 kg
    Optimum for Insulation, Metal plate, Panel, Vehicle Frame, Soundproofing material,
    Usage Adiabatic material work, Kitchen Appliances, Electric switchboard, Electronic switchboard,
    Elevator, Stainless steel plate, etc.
    3 CD STUD WELDING MACHINE’S PRINCIPLE
    1 PRINCIPLE
    1) CD Type Stud welding’s principle is that keep the electric energy in condenser and
    then using the electrical discharge and the welding heat makes the melted part and
    then welded by the spring pressure of welding gun.
    2) The arc heat is occurred by the evaporation of the Stud base’s bump by the transient
    resistor heat
    3) The electrical recharging capacity, recharging voltage and spring pressure are the essential
    part of the CD type Stud welding.

    2 FEATURES

    1) Steel, Aluminum, Stainless steel, Copper, Brass etc. and bimetal materials are available.
    2) It is good for welding of thin plated basic material.
    3) It is no welding mark on the back side of the basic material of the welding and also less
    4) deformation available.
    5) No require the cooling device.
    6) The welding result is better because the electrical energy from the condenser is equal.
    7) Easy operation and easy maintenance.
    8) So this machine is useful for various welding without making hole on the material
    because of above reasons.

    4 FRONT /REAR PANEL CONSTITUION

    1. POWER SWITCH
    1 2 2. INPUT POWER SOURCE
    11 CONNECTOR AC220V
    3
    3. LAMP DURING POWER ON
    4
    4. LAMP DURING THE GUN ATT
    5 ACHED TO THE BASIC MATERIAL
    6 5. START LAMP
    6. ERROR LAMP
    7. VOLTAGE CONTROL VOLUME
    10 9 8 7 8. GUN SWITCH CONNECTOR
    9. GUN CONNECTOR (+)
    10. GUN EARTH CONNECTOR (-)
    FRONT PANEL OF WELDING REAR PANEL OF WELDING
    11. WELDING VOLTAGE DISPLAY
    MACHINE MACHINE

    You might also like