WCS 5013
WCS 5013
2014
Edition
CONTACT
CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA
HOURS
1.1 Recognise location of existing 1.1.1 Determine theareas that needsite
21 HOURS 1. PREPARE INFORMATION building studyaccording to procedure
(7 WEEK) OF EXISTING BUILDING 1.1.2 Prepare the location according to the
existing building drawing
1 JAM TEORI 1.2 Obtain site documents 1.2.1 Identify types of site document such as
X 7 MINGGU features stated below according to standard
= 7 JAM procedure
Certified plan
2 JAM AMALI Land title
X 7 MINGGU= Topography survey plan
14 JAM 1.2.2 Determine types of site document such as
features stated above according to standard
procedure
1.2.3 Identify source of site document such as
features stated below according to standard
procedure;
Owner
Land department
Surveyor department
Application form
Processing fee
1.2.5 Collect site document as required for job
Measurement taking
Building level
1.3.4 Collect photograph site/building as required
for standard procedure
1.3.5 Record actual building information in a
format suitable for subsequent action
28 HOURS 2. DRAW EXISTING BUILDING 2.1 Prepare measured drawing 2.1.1 Determine relevant key drawings involved
(7 WEEK) DRAWING such as features stated below
Plan
Last Edited 4-7 Nov 2014
Module Page 3/11 Document Page 3
November
2014
Edition
2.5 Inspect measured drawing 2.5.1 Identify Measured drawing component such
accuracy & quality as features stated below according to
specification;
Plan
Elevation
Section
Detail drawings
specification
Drawing cleanliness
Drawing dimension
Drawing scale
Drawing legend
Drawing title block