Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    Omega PTFE Needle Valve - FVLT100

    Uploaded by

    Xavier
    The document summarizes PTFE needle valves designed for laboratory and industrial applications handling corrosive gases and liquids. The valves feature a PTFE body and single PTFE O-ring seal reinforced by a rigid metal shell. Fluids only contact PTFE and CTFE materials. They can be used for pressure or vacuum applications and disassemble easily for cleaning. Models are offered in overlapping flow ranges with aluminum, brass, or stainless steel non-wetted parts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content

    Omega PTFE Needle Valve - FVLT100

    Uploaded by

    Xavier
    17 views1 page
    The document summarizes PTFE needle valves designed for laboratory and industrial applications handling corrosive gases and liquids. The valves feature a PTFE body and single PTFE O-ring seal reinforced by a rigid metal shell. Fluids only contact PTFE and CTFE materials. They can be used for pressure or vacuum applications and disassemble easily for cleaning. Models are offered in overlapping flow ranges with aluminum, brass, or stainless steel non-wetted parts.

    Original Description:

    Omega PTFE needle valve datasheet

    Original Title

    Omega-PTFE-Needle-Valve_FVLT100

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    The document summarizes PTFE needle valves designed for laboratory and industrial applications handling corrosive gases and liquids. The valves feature a PTFE body and single PTFE O-ring seal reinforced by a rigid metal shell. Fluids only contact PTFE and CTFE materials. They can be used for pressure or vacuum applications and disassemble easily for cleaning. Models are offered in overlapping flow ranges with aluminum, brass, or stainless steel non-wetted parts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    17 views1 page

    Omega PTFE Needle Valve - FVLT100

    Uploaded by

    Xavier
    The document summarizes PTFE needle valves designed for laboratory and industrial applications handling corrosive gases and liquids. The valves feature a PTFE body and single PTFE O-ring seal reinforced by a rigid metal shell. Fluids only contact PTFE and CTFE materials. They can be used for pressure or vacuum applications and disassemble easily for cleaning. Models are offered in overlapping flow ranges with aluminum, brass, or stainless steel non-wetted parts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    PTFE Needle Valves

    FVLT101 vacuum service. The simplicity


    of design—there are only seven
    components (including a single
    PTFE O-ring)—assures reliability
    and minimizes sources of leakage.
    U Fluids Contact PTFE Only It takes seconds to disassemble
    U Structurally Rigid the valve for cleaning and
    Metal Shell maintenance. The PTFE O-ring is
    radially compressed and due to this
    U One PTFE O-Ring unique design feature the degree
    of compression may be adjusted
    The FVLT100 Series compact without disassembly by tightening
    and reliable PTFE needle valves the hexagonal bushing.
    are designed for laboratory and
    industrial applications for regulating The FVLT110 Series metering
    corrosive gases and liquids or for valves are constructed of PTFE
    high purity service. They may also and PCTFE materials. Non-fluid
    be used as shut off valves. contacting external parts are made
    of anodized aluminum.
    PTFE bodies of the valves are
    reinforced by structurally rigid Valves are offered in three
    metallic shells. Fluids contact only conveniently overlapping flow
    PTFE and CTFE materials. Shells ranges. Safety handle prevents
    are made of anodized aluminum over tightening and facilitates fine FVLT101 shown
    metered regulation. FVLT110 Series larger than actual size.
    or type 316 stainless steel and
    bushings are made of plated brass valves are useful in regulating the
    or 316 stainless steel. Where flow of corrosive gases and liquids.
    externally corrosive conditions exist They may be used in pressure or Non Fluid Contacting:
    stainless steel is recommended. non-critical vacuum service and
    FVLT100: Shell - Aluminum
    Valve spindles are made of rigid serve as bubble tight shutoff valves.
    (anodized) or 316 stainless steel
    CTFE to minimize the undesirable Bushing - plated brass, or
    material “creeping” normally Specifications 316 stainless steel. Adjusting
    associated with PTFE. Maximum Pressure: 75 psig (517 kPa) Knob-phenolic
    The FVLT100 Series PTFE valves Maximum Temperature: 65°C (150°F) FVLT110: Shell + Handle -
    are designed for relatively high Orifice Size: 3.175 mm dia. (0.125”) Aluminum (anodized)
    flow ranges while still performing Materials of Construction Fluid Number of Turns to Fully Open:
    well in low flow rates. Valves may
    be used in pressure or non-critical
    Contacting: FVLT100/FVLT110: Body
    and O-ring-PTFE. Valve spindle-CTFE
    FVLT100: 6
    FVLT110: 8
    J

    To Order
    Maximum Flow**
    ml/min ml/min
    Model No. Air Water Cv Connections Non Wetted Materials
    FVLT101 2400 130 0.011 1
    ⁄8 FNPT Aluminum/Brass
    FVLT102 55000 2800 0.250 1
    ⁄8 FNPT Aluminum/Brass
    FVLT103 2400 130 0.011 1
    ⁄4" Comp. Aluminum/Brass
    FVLT104 55000 2800 0.250 1
    ⁄4" Comp. Aluminum/Brass
    FVLT101-SS 2400 130 0.011 1
    ⁄8 FNPT 316 Stainless Steel
    FVLT102-SS 55000 2800 0.250 1
    ⁄8 FNPT 316 Stainless Steel
    FVLT103-SS 2400 130 0.011 1
    ⁄4" Comp. 316 Stainless Steel
    FVLT104-SS 55000 2800 0.250 1
    ⁄4" Comp. 316 Stainless Steel
    FVLT111 600 36 0.003 1
    ⁄8 FNPT Anodized Aluminum
    FVLT112 3000 180 0.015 1
    ⁄8 FNPT Anodized Aluminum
    FVLT113 30000 1800 0.150 1
    ⁄8 FNPT Anodized Aluminum
    FVLT114 600 36 0.003 1
    ⁄4" Comp. Anodized Aluminum
    FVLT115 3000 180 0.015 1
    ⁄4" Comp. Anodized Aluminum
    FVLT116 30000 1800 0.150 1
    ⁄4" Comp. Anodized Aluminum
    ** Flow rates are based on 10 psig (69 kPa) inlet pressure and atmospheric exhaust.
    Ordering Examples: FVLT101, PTFE wetted parts with a shell of aluminum and bushing of brass.
    FVLT112, PTFE wetted parts with a shell of aluminum and bushing of brass.
    J-72

    You might also like