Professional Documents
Culture Documents
SSR 2022-23
SSR 2022-23
25/07/2022
Preface
Thr S.S.R. shall be effective from 25 July 2022. In 2022-23 S.S.R. all the
sections related to Road work, Bridge & CD work, Building work are
included. In addition 40 new items based on new innovative technology
available in the market are also made available in 2022-23 SSR.
For Buildings :-
[email protected]
5 Bridge Works
Bridge Sub Structures and Foundation 406 448 12.02 12.72 84 91
Bridge Bearing 449 456 13.01 13.09 92 92
Bridge Super Structure 457 520 14.01 14.92 93 103
Bridge Bored Pile 521 582 15.02 15.146 104 124
Bridge Maintenance 583 588 16.01 16.09 125 125
Bored Pile, Well Foundation, Sub &
589 661 17.01 17.73 126 142
Super Structure
Arch Bridge 662 669 18.01 18.08 143 145
New Items (Bridge Repair ) 670 719 19.01 19.5 146 152
6 Building Works
Excavation 720 754 21.01 21.40 153 157
Pile Foundation Building 755 815 22.01 22.61 158 172
Structural Steel Work 816 831 23.01 23.12 173 174
Plain Cement Concrete 827 835 24.01 24.16 175 177
Reinforcement Cement Concrete 836 855 25.11 25.78 178 183
Reinforcement Cement Concrete 856 888 26.05 26.68 184 196
Brick Work 889 903 27.01 27.16 197 198
Stone Masonary 904 916 28.01 28.13 199 200
Concrete Block Masonary 917 925 29.01 29.13 201 202
Expansion Joints 926 936 30.01 30.11 203 204
Water Proofing 937 954 31.01 31.26 205 208
Plastering and Pointing 955 987 32.01 32.37 209 212
Paving, Flooring and Dado 988 1059 33.01 33.81 213 221
Wood Finish 1060 1070 34.01 34.11 222 222
Oil Painting 1071 1096 35.01 35.29 223 226
Colouring 1097 1114 36.02 36.21 227 229
Wood Work 1115 1140 37.01 37.26 230 232
Roofing and Ceiling 1141 1193 38.01 38.53 233 244
Doors and Windows 1194 1290 39.01 39.96 245 263
CHAPTER CLASSIFICATION OF ITEMS SR. NO. ITEM NO. PAGE NO.
From To From To From To
Iron Work 1291 1301 40.01 40.11 264 265
Water Supply and Sanitary Fittings 1302 1371 41.01 41.80 266 273
Water Supply and Sanitary Fittings 1372 1471 42.01 42.100 274 285
Water Supply and Sanitary Fittings 1472 1515 43.01 43.44 286 292
Building Miscellaneous Item 1516 1538 44.01 44.24 293 295
Building Maintenance 1539 1595 46.01 46.59 296 301
Structural Strengthening 1596 1619 47.01 47.26 302 307
7 Green Building
Masonary 1620 1622 48.01 48.03 308 308
Flooring 1623 1629 48.04 48.10 309 310
Colouring 1630 1636 48.11 48.17 311 311
Roofing 1637 1687 48.19 48.19 312 312
Doors & Windows 1688 1642 48.20 48.24 313 313
Plumbing 1643 1661 48.25 48.45 314 316
Rain Water Harvesting 1662 1670 48.46 48.54 317 317
Others 1671 1677 48.55 48.61 318 319
9 Additional New Items 2018-19 1725 1825 50.01 50.86 329 351
10 Additional New Items 2019-20 1826 2050 51.01 51.237 352 417
11 Additional New Items 2020-21 2051 2105 52.01 52.53 418 448
12 Additional New Items 2021-22 2106 2192 53.01 53.87 449 512
12 Additional New Items 2022-23 2193 2236 54.01 54.33 513 523
शासि पनरपत्रक:-
1) हे पनरपत्रक निगवनमत केलेल्या नदिाांकापासूि राज्यदरसूची सि 2022-23 लागू करण्यात येत
असूि ती शासिाच्या र्ेबसाईट www.mahapwd.com र्र उपलब्ध करण्यात येत आहे . ही दरसूची
सांपर्
ू व राज्यात सार्वजनिक बाांधकाम नर्भागामार्वत केल्या जार्ा-या कामाांकरीता लागू राहील. तसेच
राज्याचे इतर नर्भाग, महामांडळे इ. र् स्थानिक स्र्राज्य सांस्था मार्वत करण्यात येर्ारी बाांधकामे ,
दे खभाल दु रुस्तीची कामे यासाठी सदर दरसुची र्ापरता येईल.
2) नर्नर्ध नजल्हयातील नर्नर्ध भौगोनलक पनरस्स्थतीिुसार दरसूचीतील सांबध
ां ीत बाबींच्या दरात
बदल करण्याचे अनधकार सर्व अधीक्षक अनभयांता (सा.बाां) याांिा प्रदाि करण्यात येत असूि त्याांिी
पनरस्स्थतीचा अभ्यास करुि त्याांच्या कायवक्षेत्रातील कामाांकरीता याबाबत योग्य निर्वय घ्यार्ा.
3) दरसूचीच्या नटपर्ीत नसमेंट, स्टील र् डाांबराचे दर निनित करताांिा मागील 12 मनहनयाांमध्ये
झालेले चढउतार लक्षात घेऊि सि 2022-2023 करीता नसमेंट, लोखांड र् डाांबराचे सरासरी दर अांनतम
करुि सांबध
ां ीत बाबींचे दरपृथ:करर् करण्यात आले आहे . तसेच स्थानिक क्षेत्रािुसार मूळ दरात
करार्याची र्ाढ, सानहत्याच्या अांतरामुळे दराांमध्ये करार्याची र्ाढ, अांदाजपत्रके तयार करताांिा
घ्यार्याची दक्षता, सानहत्याची तपासर्ी करर्े, निनर्दा प्रपत्रे तयार करताांिा घ्यार्याची दक्षता, रस्त्याचे
र्र्निचर इ. बाबींसाठी आर्श्यक सूचिा िमूद करण्यात आल्या आहे त. या सूचिाांचा अभ्यास करुि सर्व
मुख्य अनभयांता/अधीक्षक अनभयांता/कायवकारी अनभयांता याांिी बाांधकामाच्या अांदाजपत्रकाांिा ताांनत्रक
मानयता प्रदाि करार्ी.
शासि पनरपत्रक क्रमाांकः रादसू-2022/प्र.क्र.12/नियोजि-3
KACHARE
8e224a, pseudonym=44879507A55BADCE1C62B2D52FC25354CE085DFF,
serialNumber=B5B30AEBA818C77E43E7B8BA4BCA0E9F0D137FEAB0BBCB1
6CACF2D44087E8A76, cn=GANPAT SANDIPAN KACHARE
Date: 2022.07.25 17:18:41 +05'30'
( ग. सां. कचरे )
अर्र सनचर्, महाराष्ट्र शासि
प्रत,
1) मुख्य सनचर् याांचे सहसनचर्, मांत्रालय, मुांबई
2) अपर मुख्य सनचर्, याांचे स्र्ीय सहायक, सार्वजनिक बाांधकाम नर्भाग, मांत्रालय, मुांबई.
3) सनचर् (रस्ते), याांचे स्र्ीय सहायक,सार्वजनिक बाांधकाम नर्भाग, मांत्रालय, मुांबई.
4) सनचर् (बाांधकामे), याांचे स्र्ीय सहायक, सार्वजनिक बाांधकाम नर्भाग, मांत्रालय, मुांबई.
5) सर्व मांत्रालयीि नर्भाग
6) मुख्य अनभयांता, सार्वजनिक बाांधकाम प्रादे नशक नर्भाग, मुांबई/कोकर्/पुर्े/ िानशक/ औरां गाबाद/
िाांदेड/अमरार्ती /िागपूर
मुख्य अनभयांता, सा.बाां. प्रा.नर्भाग,िागपूर याांिी सादर केलेल्या राज्य दरसुचीच्या प्रस्तार्ात
शासि स्तरार्रुि केलेल्या दु रुस्तीिुसार राज्य दरसूची अद्ययार्त करुि सा.बाां. नर्भागाच्या
सांकेतस्थळार्र प्रनसध्द करार्ी तसेच स्र्ाक्षाांनकत छापील प्रत (Hard Copy) नर्हीत मुल्यासह मागर्ी
केल्यास उपलब्ध करुि द्यार्ी.
7) मुख्य अनभयांता, राष्ट्रीय महामागव (सा.बाां.) नर्भाग, कोकर् भर्ि, िर्ी मुांबई.
8) सर्व अधीक्षक अनभयांते, सार्वजनिक बाांधकाम मांडळे .
9) अधीक्षक अनभयांता, दक्षता र् गुर्नियांत्रर् मांडळ, िर्ी मुांबई/पुर्े/िानशक/ औरां गाबाद/ अमरार्ती/
िागपूर.
10) मुख्य अनभयांता, सांकल्पनचत्र मांडळ (पुल र् इमारती), कोकर् भर्ि, िर्ी मुांबई.
11) सर्व कायवकारी अनभयांते, सार्वजनिक बाांधकाम नर्भाग
12) सर्व ताांनत्रक अनधकारी, सार्वजनिक बाांधकाम नर्भाग, मांत्रालय, मुांबई.
13) निर्डिस्ती (नियोजि-3).
पृष्ट्ठ 2 पैकी 2
1 Important issues for State Schedule of Rates
i) Schedule of Rates prepared for the year 2022-23 is operative from 25 July 2022 and is applicable for all the
Districts of Maharashtra. Schedule of Rates are worked out considering the rates of materials prevailing in
all districts. If the basic rates of murum, sand, metal and bricks for a particular district deviates from the
rates considered in the SSR, then the Superintending Engineer, PWD of that particular district may change
rate/s for that particular item/s. While doing so concerned Superintending Engineer, PWD shall keep the
reasons in writing on record.
ii) For the rates in Corporation area, Municipal Council Areas, Notified Tribal area, Hilly inaccessible areas &
Central Jail premises, Sugarcane factory area, Tiger Project areas, Coal / Manganese /Lime Mining area,
Naxalite affected area and Mental Hospital premises & Pandamic Special Centers, an increase of percentages
over the normal schedule of rates (Basic completed item Rates) prescribed for the year 2022-23 are as
follows:-
Specific Areas Percentage in Rates
a) Corporation Areas 5%
b) Municipal Council Areas 4%
c) Sugarcane factory area (within 10 km. radius) 5%
d) Notified Tribal Areas / Hilly Area / Inaccessible 10%
areas/ Pandamic Special Centers
e) Inside Premises of Central Jail, Mental Hospital, 15%
Yerawada Printing press.
f) Tiger project area in Amaravati, Yavatmal, Wardha, 20%
Nagpur, Bhandara, Gondia & Chandrapur Distt.
g) Coal / Lime / Manganese Mining area 5%
h) Naxalite affected area 20%
i) Metropolitan areas notified by UDD excluding 2%
Municipal Corporation and Council areas
In addition to this, for items involving construction and repair of sewer lines/ storm water drains, concerned
Superintending Engineer, PWD shall increase the rate accordingly.
Issue rates of Schedule 'A' materials for above notified area shall be increased by respective percentage. The
above percentage shall be applied on the cost of items after deducting the cost of Specified materials, if
issued on Schedule 'A'.
The Superintending Engineers (PWD) shall Specify the Sugar factory areas/ Coal mine areas/ Notified Tribal
areas under their circles.
The Notified Hilly / Inaccessible areas shall be considered as per Government Resolution, Planning
Department No. DVK-2009/CR-6/D-1483 Dated 18.01.2010 & 31.01.2018, No. DVK-2015/CR-42/D-
1481A Dated 15.06.2018 & 20.11.2018 and DVK-2015/CR-35/D-1483 Dated 31.07.2015 and applicable
GRs of Planning Department.
The Superintending Engineer, PWD shall decide necessary increase in ii(a) above if required for traffic
restriction hours and Labour rates for night working.
1) For all district excluding Gadchiroli, following instructions are applicable:-
The works which are pertaining to inside premises of central jail, Mental Hospital,Yerawada Printing press
as well as in Corporation area, an increase of percentage over normal scheduled rates shall be considered
both simultaneously e. g. If central jail is situated in corporation area an increase of 5% for corporation area
and 15% for jail premises total 20% shall be considered.
2) For Gadchiroli District Notified Tribal area, Hilly or inaccessible area, an increase shall be
(10%+20%)=30%.
Page 1
iii) Schedule of rates is based on the following basic rates of materials: -
The basic rates for materials Cement, Steel, Sand, Bricks may vary from district to district. While preparing
the item rates for State Schedule of Rates, the basic rates from all Districts are considered at an average
level.
The Rates of Bitumen given above are Average Basic rates for 12 month as on . While preparing estimates,
the rates prevailing at that time of Ex-Refinery Mumbai, shall be considered. The Rates of Steel and cement
indicated above are considered as per the average annual rate for the year 2021-22 All rates are exclusive of
GST.
The Portland Pozzolana Cement (PPC) & Portland Slag Cement (PSC) shall be of reputed manufacturer
only. (as per IS 1489-1 (1991 & IS 1489-2 (1991and IS 455 (1989) resp.)
While preparing estimates if any specific grade of structural steel other than the SSR and grade of Bitumen
other than SSR is required, then concerned Superintending Engineer, PWD shall be competent to
incorporate the same in the detailed estimate.
Labour rates are provided and certified by labour commissioner, Nagpur.
Machinery hire charges rates are provided by Mechanical wing of PWD.
b) As per Govt. Circular No.SSR - 1090/CR-6453/PLN-3 Dt. 14.07.1993 and as per GR of Industries and
power Department No. BCA–2009/CR-108/Labour 7-A dated 17.06.2010, Labour Cess at 1% has been
considered separately in Rate Abstracts.
c) For labour amenities and all other overhead charges, 10% provision is considered in Rate Abstract. In
addition, 10% provision for Contractor's Profit is also considered separately.
Page 2
v) The Government of Maharashtra, Revenue and Forest Departments Gazette No.146 Dt. 04 June 2021 States
that the Royalty charges of Rs. 600/- Per Brass (i.e. Rs.211.95 /cum.) are to be considered. The surcharge
levied on Royalty shall also be payable to the contractor in following manner . Royalty charges on all minor
minerals do not form part of Rate Abstract and shall be reimbursed separately on production of proof to that
effect. The Superintending Engineer, PWD may modify and circulate Royalty charges in case of any
modifications are made by Govt. of Maharashtra. Royalty charges against estimated quantity shall be
included in Recapitulation sheet.
a) For sand = Royalty + surcharge (2%) + Distt. Mineral Foundation Cess (10%)
= 211.95+4.23+21.19 = 237.37 Per Cum
b) For All Other Minerals = Royalty + surcharge (2%)
= 211.95+4.23 = 216.18 per cum
vi) For crushed metal aggregates separate royalty charges shall not be considered as it is a finished product.
vii) In water scarcity area (the locality declared as drought prone area by District Collector for specified period),
the Superintending Engineer, PWD concerned shall suitably increase the rate for particular item considering
the requirement of water for that item.
viii) Leads and lifts
a) Rates For transportation of material by Truck from different leads have been worked out as per table given
by National Building Organization. The cost per trip shown in statement 'C', also includes charges of
running empty vehicle for return trip. For calculation of transportation charges rates tabulated in material
master for following items are considered in the formula
a ) Mazdoor b) Diesel c) Mobile Oil d) Truck
e) The Basic rates for all quarrying materials such as Rubble, boulders, aggregates, sand, murum, selected earth
etc. are taken as rates at quarry with lead of 50 mtr. (Head load lead is not to be deducted from lead)
b) For other items required to be executed in foul condition up to Ground Level / Bed Level, the rate shall be
increased by 5% over schedule rates of individual items of CSR. This increase is over and above under
general note (ii)
c) The above hike in rates of (a) & (b) shall be subject to the express condition that the prior approval of
Superintending Engineer, PWD is obtained. The foul condition shall be certified by the Executive Engineer.
Page 3
xii) General Guidelines :-
a) The contents of SSR Annexure are as follows :- Statement A-1 - Material Master. (Basic rates of materials)
Statement A-2 - Labour Master.
b) References of PWD Standard Specification/ MORT & H Specification are mentioned in schedule of rates.
c) In case of sudden rush of works like Kumbhmela at Nasik, Guru-ta-Gaddi at Nanded, Asian games at Pune,
the Department may face shortage of material and other resources. In such situation the concerned
Superintending Engineer, PWD shall prepare the new Schedule of Rates or make necessary amendment/s in
SSR with the prior permission of the respective Chief Engineer, PWD.
d) The testing facilities, for construction materials, which are not available in Government Laboratories/
Institutions, test results can be obtained from ISO Certified and NABL Accredited private quality control
Laboratories / Govt. approved Engineering colleges, Polytechnic.
e) Use of Geo textiles, for strengthening the soil is work of special techniques requiring precise use of materials
and skilled supervision. Use of Geo textiles in soil stabilization may be included in estimate only after the
prior permission of the Competent Technical Sanctioning Authority.
f) As far as possible, use of Cold mix items shall be discouraged. However, if found necessary, Rate Analysis
for cold mix item with seal coat shall be approved by the Superintending Engineer, PWD of that particular
Circle.
g) Reduced task rates @ 20 % for Items required for diversion, is to be done wherever diversion is required.
h) The rates of Material, Labour and Machinery are same for all over state, however if any changes at local
level, it shall be approved by the Superintending Engineer, PWD of that particular Circle.
i) Disclaimer about RA :-
Rate Analysis is to be used only for base purpose of rates arrived in SSR. If any corrections found in
RA, it should brought in the notice of SSR committee, so that committee will take review on it and will
take decision to correct RA. No person / Contractor / Organistion can claim any amount based on the
‘Rate Abstract’ for the particular item. The ‘Rate Abstracts’ are nearly for estimation purposes as
guidelines.
j) राज्य दरसूचीमध्ये अद्यावत तंत्रज्ञानावर आधारीत काही ववविष्ट बाबी उत्पादकाचे नावासह 2020,2021,2022
या तीन वर्ाामध्ये समाववष्ट करण्यात आलेल्या होत्या. ह्या बाबी ववविष्ट खाजगी कंपन्ांिी वनगडीत असल्या
तरी राज्य दरसुचीमध्ये समाववष्ट करणे िासनाच्या दृष्टीने वहतावह असल्याने अिा नववन बाबी ं कररता पररविष्ट
‘A’ वेगळ्याने प्रवसद्ध करण्यात येत आहे .
Page 4
Section B - Instructions for preparing estimate
i) A As per revised circular issued by Directorate of Insurance Maharashtra State vide letter No. क्र. प्रविनी -
2314/ दे यक कपात रक्कम/ संकीर्ण / अवि-3,वदनां क 31/03/2015, Insurance towards labour is not considered in
rate abstract of SSR items. Provision for the same shall be made in the recapitulation sheet as follows.
i) B The Contractor shall insure Project / Work facility for entire period of contract including all assets existing
on the date of award of work and any subsequent assets created during construction and maintenance
including extension, if any, and upto DLP period shall stand covered under this insurance coverage. The
Contrator shall submit the insurance document within 7 working days from the date of work commencement
order. This insurance premium shall stand reimbursable in the 1st RA bill. The amount for premimum of
such insurance shall be as per GIS ( General Insurance Scheme) norms of Directorate of Insurance Govt. of
Maharashtra. Such insurance, since reimbursable, is not considered in rate abstract of SSR items, the
amount of assets premimum shall be considered as per percentage specified at Sr.No. (1) A for work value
mentioned for total period of construction and maintenance including DLP in recapulation sheet while
framing the estimate.
ii) For items of buildings having ground plus upper floors rate shall be increased as follows for the floor lift.
Above fourth floor the percentage increase in Rates floor wise shall be decided by concerned SE, PWD.
b) Statement C2 is for loading, unloading and stacking charges. Loading and unloading charges are to be
deducted from Transportation charges in Statement C1, wherever transportation charges without loading and
unloading are required.
c) Rate of transportation of bulk bitumen from refinery to the plant site is Rs. 10 / M.T./ km. Rate of heating
and decanning bulk bitumen is Rs. 137.00 / M.T.
d) While framing the estimates, for transpotation of bitumen and RCC hume pipe, Toll charges payable at
various Toll palzas shall be considered under a separate item. The rate shall be adpoted as per NHAI/
MORTH toll policy. The rate per kilometre shall be adopted for this shall be payable to contractor on
submission of Toll receipt at various Toll plazas by shortest route.
iv) The items for which rates are not included in state schedule of Rates, the rates shall be approved by
concerned superintending Engineer, PWD.
v) The rates for items pertaining to Parks & Gardens shall be taken from the SSR of Parks & Gardens wing of
PWD.
Page 5
vi) For items of excavation, foundation concrete and masonry etc. for C. D. works, rates shall be adopted from
corresponding items under respective building sections.
vii) Rates for items of excavation are worked out by considering the excavation using machineries. But where
site is inaccessible for machinery then rates for manual excavation shall be taken with prior permission of the
Superintending Engineer, concerned.
viii) For scaffolding work required to be erected for carrying out repairing work on external faces of building at
various heights (viz. Repairs to chajja, external plastering, painting etc.). The rate of respective item shall be
increased by 1%, provided the work is carried out by erecting scaffolding. For specific cases rate analysis
shall be got approved from concerned Superintending Engineer, PWD. If separate item for scaffolding is
considered in estimate, then this increase shall not be applied.
ix) All concrete items considered in SSR are inclusive of normal curing system.
x) For building works costing more than Rs. 25.00 Crore, curing shall invariably be done by intelligent curing
system. Separate Rate analysis approved by concerned Superintending Engineer, PWD shall be used for
estimation purpose.
xi) For repair works considering small quantity of work nominal mix shall be used for PCC / RCC items.
xii) If higher Concrete grade, is required for any specific work, the rate analysis of the same shall be derived by
adding difference in standard cement consumption in relevant SSR item’s rate and shall be got approved
from the Superintending Engineer, PWD of concerned circle.
xiii) For deep foundation works, if found necessary, additional deep work charges, shall be got sanctioned from
the Chief Engineer of concerned region.
xiv) For preparation of estimates the detailed plans (Civil and Electrical) shall be finalized with consent of user
department and then the detailed estimate is to be prepared and submitted for Administrative Approval.
xv) In respect of new buildings and bridges, type of foundation should be fixed on the basis of detailed soil
investigation report and no change in foundation shall be made without study of technical and financial
implications. If such change is required out of technical necessity, the approval of the competent authority,
which has given technical sanctioned be taken first and then only changes should be executed.
xvi) While preparing Estimate, if the item of dewatering is necessary in estimate, proper item must be included
and verified by the concerned technical sanctioning authority. The dewatering rates in Bridges/Building
section includes post monsoon flow of river/Nallahs having general seepage of water only and does not
include provision of cofferdam, caging etc. In specific condition, if cofferdam/caging/dewatering using
mechanical pumps is felt necessary then appropriate dewatering item from SSR shall be taken or separate
rate analysis shall be prepared and got approved from concerned Superintending Engineer, PWD.
xvii) While preparing Estimate, actual and practical distance of worksite from quarries shall be taken and adequate
quantity of good quality material shall be ascertained by concerned Executive Engineer. Extra care shall be
taken in case of lead of murum and sand.
xviii) Provision shall be made for taking Photographs, Video Shooting, load testing etc. separately in detail
estimate and shall form part of Schedule B .
xix) For building works for the excavation beyond 3.0 metre depth, following increase in basic rate of an item
shall be made:-
a) 3.0 m to 4.50 m depth add 20 %
b) 4.5 m to 6.0 m depth add 30 %
c) Depth beyond 6.0 m extra percent to be decided by concerned Superintending Engineer.
Page 6
xx) The rates of various Concrete and BT items are inclusive of SCADA. SCADA is compulsarily adopted to the
various works as per Govt. circular. However where it is not possible to use/adopt SCADA due to not
availabilty of internet network or in case of small works, Misc. works, Repair works the rate shall be
deducted from basic SSR rates. The amount to be deducted for concrete items shall be Rs. 126.00 per cum
and for BT item shall be Rs. 63.00 per cum and the amount shall be converted per Sqm respectivily. The
permission of not adopting SCADA shall be obtained from the Superitending Engineer or Chief Engineer
who is the Competent Authority to accord Technical Sanction prior to execution or at the time of sanction of
estimate as the case may be.
xxi) For RCC / PQC items involving modified type of curing, the basic rate of such items shall be increased by
5% to consider cost of curing compound.
xxii) For built up drain, the basic rate of item shall be increased as mentioned for foul conditions ( i.e. Point No.
(x) Page No. 4 of this general note)
xxiii) The DPR and estimate must certify on quarry chart that
a) Quarries selected have sufficient quantity of required of specific quality needed.
b) That shortest lead has been considered while preparing the estimates.
xxiv) Manufactured sand/ Crushed sand shall be used for work if natural sand is not available. However, in such
cases the job mix design shall be get done before use wherever required.
xxv) New items included in last year SSR shall be encouraged & used on pilot basis.
xxvi) While Applying Hot Thermoplastic Road Marking on Concrete Road Surface, Base primer coat should
be added separately in Rate Analysis.
Page 7
Section C - Testing of Materials
i) Laboratory testing charges are not considered in the Rate Abstracts. Wherever required separate item shall be
taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by
Vigilance & Quality Control Circle, for the current year and shall form part of Schedule B of tender.
ii) For Specific tests like span load tests, plate/ pile load test etc. which are not included in the rate analysis of
item, the rates for these tests shall be prepared on the basis of rates approved by M.E.R.I./ any competent
Institute of Govt. of Maharashtra or Govt. of India.
Page 8
Section D - Instructions for tender Clause
i) The contractor shall produce the work insurance policy, the same will be reimbursed to the contractor. If
contractor fails to produce the work insurance policy, Concerned Executive Engineer shall draw the policy,
the expenditure incurred for drawing the policy shall be recovered from the 1st R.A. bill of the contractor as
penalty to the Contractor.
ii) If completion period of work is Extended, then period of work Insurance must be renewed/ extended as per
requirement.
iii) Mandatory Testing of Material and Penalty Clause
It is mandatory on the part of contractor to carry out all the required tests of various construction materials as
mentioned in schedule 'B' of the tender. If the contractor fails to submit required test result of the various
construction materials as mentioned in the items of schedule 'B', he will be liable to deposit the amount at
penal rate of five times of the amount of particular test which he has not carried out. Contractor will be
informed by the Engineer-in-Charge through letter. On receipt of letter, contractor will have to either deposit
the said amount or to carry out the required test within ten days. If he again fails to carry out the required
tests in stipulated time limit, the said tests will be carried out by the department and total expenditure
incurred on the testing charges plus five times amount of testing charges will be recovered from the
contractor's bill.
As this recovery is only due to the negligence on the part of contractor to carry out work as per Tender
conditions and Executive Engineer's decision will be final and binding on the contractor and it can not be
challenged by the contractor by way of Appeal, Arbitration or in the Court of Law.
Considering above, relevant clause shall be included in DTP.
Tender Percentage for Royalty, Testing charges and Man power
While preparing D.T.P, the Schedule "B"/BOQ amount shall be divided as(A) work Portion and (B),
Royalty charges, Testing charges and Man power for Dept
For B-1 tender the Percentage shall be applied to work portion. (A) only.
For B-2 tender the Rate of item shall be applied to work portion. (A) only.
In above both case the part "B" of schedule B/BOQ will be intact.
Considering above, relevant clause shall be included in DTP.
The percentage above or below quoted by the successful bidder shall not be applied for the items of Testing
Charges, Royalty and also insurance premium for all types of contract.
iv) GSB : The works, in which the granular sub-base is proposed to be used as per pavement design or
the otherwise, suitable gradation as per the requirements of the drainage in the sub-base strata,
quality of sub-base on which road structure is going to be rested and the requirements of
strengthening of base/sub-base course. There are 6 gradation available in MORTH specification and
the contractor shall use proper graded GSB if the design is to be submitted by the contractor or
suitable gradation shall be selected by the technical sanctioning authority as per the site requirements.
No extra payment shall be made for change in gradation.
Page 9
v) Seal Coat : It is observed that, whenever the item involved in bitumen spray such as BUSG/Surface
dressing / DBM / BBM /Liquid seal coat, the spraying of asphalt is unreasonably uneven there by
reduces the life of treatment imparted. The reasons could be attributed to lack of supervision on the
part of contractor, lack of supervision on the part of supervisory engineers from PWD or may be due
to the negligence of sprayer. In all probabilities, in spite of heavy investment done by the Government
for construction/resurfacing / strengthening of pavement structure, the work does not endure its
designed life. In consequences the department has to receive comments from users of road ultimately
damaging the image of the department or Government.
In order to eliminate this problem, the contractor shall submit photographs / video-graphs of
bitumen spray over the prepared surface and submit along with the bills without which the payment
against such items shall not be released. The photos shall be geo-tagged in order to ascertain the
application of bitumen spray at the particular location of work. No extra payment shall be made for
photographs & videography.
vi) For the use of branded items / fixtures / tiles or any lavish treatment, the item rate list shall be
approved by teritorial SE / competent authority with the prior approval from user department &
their demand in writing. Even if the items / products are to be used through CR where the authority
of technical sanctioning rests with EE, the executive engineer concerned shall obtain prior approval of
Superintending Engineer concerned.
vii) Tining to Rigid Pavements :-
It is observed that wherever the tining work is executed on site the tining work is unreasonably
uneven there by reducing the life of the pavement, which cause skidding of the vehicles on the road
surface. The reasons could be attributed to lack of supervision& workmanship on the part of
contractor & lack of supervision on the part of supervisory Engineer from PWD in all probabilities,
In spite of heavy investment done by the government for resurfacing/ strengthening of pavement. In
consequences the road user endanger his life or may face any accident.
In order to eliminate this problem the contractor /agency shall submit photograph / videography of
the tining treatment done to the road surface along with the bills to Deputy Engineer / Executive
Engineer for payment without which the payment against such items shall not be released.
viii) For GST charges on Royalty and material testing, the recepit of payment of GST charges on royalty
and testing charges shall be submitted by the contractor at the time of Bill payment and amount will
be reimbursed to the contractor accordingly.
Page 10
Section E - Additional notes for Coastal Items
i) Coastal items are applicable for Mumbai City, Mumbai Suburban, Thane, Palghar, Raigad, Ratnagiri &
Sindhudurg Districts.
ii) This schedule of rates is applicable to all coastal protection works such as Anti Sea Erosion Bund, Groyne,
Breakwater etc. to be constructed in the tidal condition along the sea coast & in the sea/creek area of all
Coastal Districts.
iii) For all completed items no initial lead is considered for material like sand, metal, stones etc. Lead charges for
these materials shall be added while estimation.
iv) Following increase over normal schedule of rates mentioned in this schedule are admissible on following
accounts.
a) Defence Area [such as INS Hamla, Malad for security reasons] : 10%
In Case more than one percentage increase on basic rates is admissible, instead of adding both the
percentages, the higher percentage should be considered. (e.g. if any Defence area falls in the Municipal
Corporation area then percentage addition will be only 10% and not with 10% + 5%). The above percentage
increase should be applied on completed item rate.
v) Items which comes under tidal condition 10% is to be added over completed item rate.
vi) The head load is to be considered with prior permission of Coastal Engineer while preparing detailed rate
analysis for inaccessible area where shifting of materials by head load is necessary. The State Schedule of
Rates shall be adopted.
vii) For the works in Elephanta, Arnala Fort, Panju island and such other islands and works such as light houses,
guide poles to be constructed on the island or in the Sea/Creek, the actual boat charges for transportation of
materials and labours shall be taken and detailed rate analysis for transportation of materials by boats shall be
done and approved by Coastal Engineer. The boat charges shall be considered as follows:
a) Small boat (Single Cylinder @ Carrying Capacity = 1.50 MT) : Rs.4500/- per Day
b) Big boat (Double Cylinder @ Carrying Capacity = 5.00 MT) : Rs.8000/- per Day
viii) The items included in this Section of schedule of rates are special items required for Coastal Engineering
Works. For other items, State schedule of Rates should be adopted. Items which comes under tidal condition
10% is to be added over completed item rate.
ix) For all works of Coastal Engineering Circle (Excluding building), for item of excavation rates of
corresposnding bridge items shall be considered.
Page 11
Section F - Road Furniture
i) IRC 67 2012 Table 6.2 Suggested Guidelines for Usage of Retro-Reflective Sheeting
Class of Type of Category of Road
Sheeting Sheeting National/State Major Rural Roads Urban/Cit Express way
(ASTM) Highway District y Roads
Roads
Type I No Yes Yes No No
Class A
Type II No Yes Yes No No
Type III Yes Yes Yes Yes No
Class B
Type IV Yes Yes Yes Yes No
Type VIII Yes No No Yes Yes
Class C Type IX Yes No No Yes Yes
Type XI Yes No No Yes Yes
ii) IRC 67 2012 Table 8.3 Colour Pattern for Direction Information Signs
iii) Warranty for Class B and Class C sheet of Cautionary / Mandatory / Informative Sign boards
Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty
from the manufacturer and authorised distributor/convertor issued for field performance including the screen
printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate
in original should be submitted to the Engineer in Charge by the contractor/supplier.
Class C ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the
manufacturer and authorised distributor/convertor issued for field performance including the screen printed
areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in
original should be submitted to the Engineer in Charge by the contractor/supplier.
The contractor shall produce the written warranty from the manufacturer and authorise distributer/convertor,
else 20% of single item amount shall be deducted from his first R.A. Bill.
Page 12
GOVERNMENT OF MAHARASHTRA
5 Road Survey 1.05 Taking the trial pit for roads, alignment, C.D. Works in Hard murum, including stacking As directed by One Cubic Metre 706 706
and DPR the excavated material including all lifts and necessary back filling upto depth 3.0 meters Engineer in charge
6 Road Survey 1.06 Taking the trial pit for roads, alignment, C.D. Works in Hard murum, and Boulders As directed by One Cubic Metre 780 780
and DPR including stacking the excavated material including all lifts and necessary back filling Engineer in charge
upto depth 1.5 meters
7 Road Survey 1.07 Taking the trial pit for roads, alignment, C.D. Works in Hard murum, and Boulders As directed by One Cubic Metre 984 984
and DPR including stacking the excavated material including all lifts and necessary back filling Engineer in charge
upto depth 3.0 meters
8 Road Survey 1.08 Fixing survey pegs in earth and all sorts Soil, Sand, Gravel, Soft Murum, etc. including As directed by One Number 12 12
and DPR conveying, fixing etc. complete. Engineer in charge
9 Road Survey 1.09 Reconnaisance Survey of Road alignment in plain country including taking three As directed by One Kilometre 2121 1998
and DPR dimensions of apexes, verification of type of land etc. alongwith the alignment etc. Engineer in charge
complete (Without Chaining).
10 Road Survey 1.10 Reconnaisance Survey of Road alignment in plain country including taking three As directed by One Kilometre 5414 4801
and DPR dimensions of apexes, verification of type of land etc. alongwith the alignment etc. Engineer in charge
complete (With Chaining).
11 Road Survey 1.11 Reconnaissance Survey of a road alignment for new hilly road utilising exsisting forest As directed by One Kilometre 5711 4848
and DPR cart tracks with use of ghat tracer (if found necessary), taking three dimensions of apexes Engineer in charge
including verification of type of land etc. complete. (Without Chaining)
Page 13
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
12 Road Survey 1.12 Reconnaissance Survey of road alignment for new hilly road utilising exsisting forest As directed by One Kilometre 5516 4717
and DPR cart tracks with use of ghat tracer (if found necessary), taking three dimensions of apexes Engineer in charge
including verification of type of land etc. complete. (With Chaining)
13 Road Survey 1.13 Reconnaissance Survey of road alignment in hilly road utilising exsisting forest cart As directed by One Kilometre 3017 2370
and DPR tracks with use of ghat tracer (if found necessary), taking three dimensions of apexes Engineer in charge
including verification of type of land etc. complete. (Without Chaining) .
14 Road Survey 1.14 Reconnaissance Survey of road alignment in hilly road utilising existing forest cart tracks As directed by One Kilometre 5888 5089
and DPR with use of ghat tracer (if found necessary), taking three dimensions of apexes including Engineer in charge
verification of type of land etc. complete. (With Chaining) .
15 Road Survey 1.15 Detailed survey of road in plain country including chaining and levelling with cross As directed by One Kilometre 6505 4310
and DPR sections at every two chains inclusive of closing of survey each day. Engineer in charge
16 Road Survey 1.16 Detailed survey of road length where earthwork is partly done including chaining and As directed by One Kilometre 6094 3526
and DPR levelling with cross sections at every two chains inclusive of closing survey each day. Engineer in charge
17 Road Survey 1.17 Detailed survey of road through hilly country taking cross section at every chains or as As directed by One Kilometre 9722 5693
and DPR required including chaining , levelling and closing survey each day. Engineer in charge
18 Road Survey 1.18 Detailed survey of road through hilly country taking cross section at every chains as As directed by One Kilometre 7775 5197
and DPR desired including chaining ,levelling and closing survey each day utilising existing cart Engineer in charge
track.
19 Road Survey 1.19 Providing and Fixing Wooden survey pegs including White washing etc. complete. As directed by One Number 52 33
and DPR Engineer in charge
20 Road Survey 1.20 Carrying out catchment area traverse survey of minor stream (not traceable in toposheet) As directed by One Kilometre 3460 2030
and DPR below 100 acres Engineer in charge
21 Road Survey 1.21 Cutting down branches of trees , bushes etc. stacking the material neatly as directed (For As directed by One Kilometre 8116 8116
and DPR Motarable Road) Engineer in charge
Page 14
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
22 Road Survey 1.22 Providing detailed layout plan of area in scale 1:500 including carrying out contour survey MORTH One Acre 9076 7389
and DPR and detailed Engineering plane table Survey with the help of 24 Alidade. The dolomite
area measurement of the plot and structures, trees, over head line and under ground
service amenities within the area, with triangular method and giving detailes of the
structures, such as total area, type of building and distance from all corners taking trial pit
0.5x0.5x2.00 m.-2Nos. per acre and collection of record from city survey / D.I.L.R.
authorities and authentication. The plan shall be traced on 75 micron polyster film and
shall be submitted along with three Amonia prints. The contour levels shall be marked at
0.5 Meter intervals. Note:- The items includes- 1)Traversing work with theodolite and
steel tape. 2) Levelling Grid Work of the terrain. 3)Detailed Engineering Survey and
contouring work of the terrain. 4)Plotting work. 5)Collection of Record. a) up to 1
Acre
23 Road Survey 1.23 Providing detailed layout plan of area in scale 1:500 including carrying out contour survey As directed by One Acre 9076 7389
and DPR and detailed Engineering plane table Survey with the help of 24' Alidade. The dolomite Engineer in charge
area measurement of the plot and structures, trees, over head line and under ground
service amenities within the area, with triagular method and giving detailes of the
structures, such as total area, type of building and distance from all corners taking trial pit
0.5x0.5x2.00 m.-2Nos. per acre and collection of record from city survey / D.I.L.R.
authorities and authentication. The plan shall be traced on 75 micron polyster film and
shall be submitted along with three Amonia prints. The contour levels shall be marked at
0.5 Meter intervals. Note:- The items includes- 1)Traversing work with theodolite and
steel tape. 2) Levelling Grid Work of the terrain. 3)Detailed Engineering Survey and
contouring work of the terrain. 4)Plotting work. 5)Collection of Record. b) Above 1
Acre
24 Road Survey 1.24 Reconnaisance survey including study of sheets, maps etc. for alignment including 3 As directed by One Kilometre 29252 14936
and DPR dimension of apexes, fixing pegs, chain and compass or cross staff survey with L-Section Engineer in charge
and cross section of alignment at every 30 m or at every change of deviation whichever is
less including fly levels at closing of day, fixing apex and B.M. stones of size
0.20*0.20*0.75 m in 1:2:4 C.C. at every 200 m and preparation of alignment plans and
all type of compliance if required from department.
25 Road Survey 1.25 Preparation of detailed Plans and Estimates of road including typing in 5 copies, ammonia As directed by One Kilometre 16961 15570
and DPR prints, with colouring of plans, proper filing, indexing and paging etc. complete and all Engineer in charge
types of compliance, if required from Department.
Page 15
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
26 Road Survey 1.26 Survey of C.D. works including taking L-section of Road, catchment area plan by As directed by One Number 16334 12135
and DPR Traverse method and taking trial pits of size 1.00x1.00x1.50 m including preparation of Engineer in charge
detailed Plans and Estimates in 5 copies and all types of compliance if required from the
Department.
27 Road Survey 1.27 Survey of Minor bridge including taking L section of existing road and two defined cross As directed by One Number 61343 36036
and DPR sections ,one of U/s and one of D/s, one vergin cross section on alternate proposed cross Engineer in charge
sections and bed slope of stream upto sufficient long distance as required with chain and
compass. Taking three trial pits of size 1.00x1.00x3.0 m and collecting samples of
materials at site for ascertaining the silt factor, unit weight test, specific gravity from
Govt. approved laboratories( testing charges to be borne by the agency) and preparation
of detailed survey data, submission of the project duly typed and colouring of the
ammonia prints, site plan and other drawings etc. complete if required from the
Department.
28 Road Survey 1.28 Survey of major bridge including taking L-section of existing road two defined cross - As directed by One Running 1890 1172
and DPR sections (one at U/S and one at D/s) and one vergin cross section on alternate proposed Engineer in charge Metre
cross sections and bed slope of stream upto sufficient long distance as required with chain
and compass.Taking 5 trial pits, three in bed, two on banks of size 2.00x2.00x3.00 m for
collecting samples of materials at site for ascertaining the silt factor, unit weight test,
specific gravity from Govt. approved laboratories (testing charges to be borne by the
agency) and preparation of detailed survey data, submission of the project duly typed and
colouring of ammonia prints, site plan and other drawings etc.complete. And all types of
compliance if required from Department. (Excluding taking trial bores and contouring)
30 Road Survey 1.31 Preparation of detailed plans and estimates of Raise Causeway on the basis of the As directed by One Number 10461 9257
and DPR approved detailed survey data by competent authority including typing in 5 copies Engineer in charge
ammonia prints site plan other drawings with colouring of plans proper filling indexing
and paging etc.complete and all types of compliance if required from Department.
Page 16
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
31 Road Survey 1.32 Complete survey of stream having catchment area upto 1 sq. mile including catchment As directed by One Number 8866 4680
and DPR survey taking necessary L.S./C.S. and other details etc. complete. Engineer in charge
32 Road Survey 1.33 Complete survey of stream having catchment area above 1 sq. Mile and upto 5 sq. Miles As directed by One Number 18724 13079
and DPR including taking necessary L.S./C.S. and other details etc. complete. Engineer in charge
33 Road Survey 1.34 Reconnaissance survey of alignment in plain country for approaches to the bridge As directed by One Kilometre 2255 1791
and DPR including taking three dimensions of apexes. ( Without chaining ) Engineer in charge
34 Road Survey 1.35 Fly levelling for carrying out bench mark. As directed by One Kilometre 1812 1217
and DPR Engineer in charge
35 Road Survey 1.36 Detailed survey of approaches including Chain and Compass survey along bridge As directed by One Kilometre 4663 3273
and DPR alignment and approaches including closing each day work. Engineer in charge
36 Road Survey 1.37 Taking longitudinal section of streams extending upstream and downstream side of the As directed by One Kilometre 5655 4265
and DPR bridge site, requisite One Number of cross section of the stream on either sides block Engineer in charge
contouring and other details etc. complete. (Length of L.S. and C.S. for contouring to be
worked out)
37 Road Survey 1.38 Demarcation of right of way (ROW) as per design using total station including calculation As directed by One Kilometre 9877 5318
and DPR of co-ordinates of 30 Meter interval on both sides of road. Engineer in charge
38 Road Survey 1.39 Preparation of Land Acquisition proposal including collection of 7/12 and 8/A documents As directed by One Kilometre 27486 15507
and DPR marking alignment on village maps , area calculation, preparation of proposal, Engineer in charge
printing,binding, etc. complete and submission of 5 sets more ever liasoning and
coordination with revenue authorities with compliance if any until finalisation of award
including Joint measurement of the alignment. For new alignment.
39 Road Survey 1.40 Preparation of Land Acquisition proposal including collection of 7/12 and 8/A documents As directed by One Kilometre 20343 10760
and DPR marking alignment on village maps , area calculation, preparation of proposal, Engineer in charge
printing,bindind, etc. complete and submission of 5 sets more ever liasoning and
coordination with revenue authorities with compliance if any until finalisation of award
including Joint measurement of the alignment. For existing alignment.
40 Road Survey 1.41 Carrying of detailed topographic survey by using total station along the existing or new As directed by One Kilometre 46615 22965
and DPR road including taking L-section and cross section at every 30 meter ROW ,taking at least Engineer in charge
10 spot levels per cross section, picking up all existing details inside the Row like
electric telephone line , encroachments, structures etc. connecting all the primary total
station control points by G.I.S.Bench marks level or whichever available with department
using auto level and preparing Auto CAD plan by using above data taking out 1 set of
black and white printout on 50 micron polyster film sheet A2 size and 2 sets of coloured
printout on A2 size submitting soft copy all data on CD. Plain Terrain New Alignment
Page 17
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
41 Road Survey 1.42 Carrying of detailed topographic survey by using total station along the existing or new As directed by One Kilometre 43301 19410
and DPR road including taking L-section and cross section at every 30 meter ROW ,taking at least Engineer in charge
10 spot levels per cross section, picking up all existing details inside the Row like
electric telephone line , encroachments, structures etc. connecting all the primary total
station control points by G.I.S.Bench marks level or whichever available with department
using auto level and preparing Auto CAD plan by using above data taking out 1 set of
black and white printout on 50 micron polyster film sheet A2 size and 2 sets of coloured
printout on A2 size submitting soft copy all data on CD. Plain Terrain Existing
Alignment.
42 Road Survey 1.43 Carrying of detailed topographic survey by using total station along the existing or new As directed by One Kilometre 59200 30221
and DPR road including taking L-section and cross section at every 30 meter ROW ,taking at least Engineer in charge
10 spot levels per cross section, picking up all existing details inside the Row like
electric telephone line , encroachments, structures etc. connecting all the primary total
station control points by G.I.S.Bench marks level or whichever available with department
using auto level and preparing Auto CAD plan by using above data taking out 1 set of
black and white printout on 50 micron polyster film sheet A2 size and 2 sets of coloured
printout on A2 size submitting soft copy all data on CD. Hilly Terrain New Alignment
43 Road Survey 1.44 Demarcation of Road boundry (ROW) including fixing the boundry stones of standard As directed by One Kilometre 41261 10987
and DPR size and shape including fixing in block of standard size of C.C. of 1:4:8 white washing Engineer in charge
at 30 M interval on both sides
44 Road Survey 1.45 Taking trial bores 75 to 100 mm for 53.0 to 88.9 mm core dia over burden ( by diamond As directed by One Running 2110 447
and DPR drilling machine ) such as soil of all sorts, soft murum,hard murum and boulders and in Engineer in charge Metre
soft rock including all materials such as casing pipes and accessories oil, grease, steel,
rods, and such other materials as required (including conveying the material to site of
work) . Preserving the loose sample in glass jar and core sample serially on site of work
and conveying the same to HQ of concernring office as directed. a) over burden 0 to 50
meter.
45 Road Survey 1.46 Taking trial bores 75 to 100 mm for 53.0 to 88.9 mm core dia in rocks as specified below As directed by One Running 6814 522
and DPR including all necessary materials such as oil,grease,steel boostan and such other materials Engineer in charge Metre
as required (including conveying the material to site of work) and Preserving the core
sample serially on site of work and conveying the same to HQ of concernring office as
directed. Quartzite with diamond drill with Nx Bit 0 to 50 metre
Page 18
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
46 Road Survey 1.47 Taking trial bores 75 to 100 mm for 53.0 to 88.9 mm core dia in rocks as specified below As directed by One Running 4133 745
and DPR including all necessary materials such as oil,grease,steel boostan and such other materials Engineer in charge Metre
as required (including conveying the material to site of work) and Preserving the core
sample serially on site of work and conveying the same to HQ of concernring office as
directed. Quartzite with diamond drill with Ax Bit 0 to 50 metre
47 Road Survey 1.48 Taking trial bores 75 to 100 mm for 53.0 to 88.9 mm core dia in rocks as specified below As directed by One Running 3910 522
and DPR including all necessary materials such as oil,grease,steel boostan and such other materials Engineer in charge Metre
as required (including conveying the material to site of work) and Preserving the core
sample serially on site of work and conveying the same to HQ of concernring office as
directed. Other Rock with diamond drill. 0 to 50 metre
48 Road Survey 1.49 Providing tun tappa core boxes of jungle wood of size1.25mx 0.35x 0.15m for As directed by One Number 5665 1760
and DPR preserving core sample with all fixtures and fastening handles including locking Engineer in charge
arrangment etc . complete.
49 Road Survey 1.50 Providing and maintaining temparory platform of bore location in river bed in upto 1M of As directed by One Number 13882 7372
and DPR standing water and of size 3.50 x 4.00 M by using sand bags in layer for platform Engineer in charge
including all required materials labours etc. complete.
50 Road Survey 1.51 Providing and maintaining temporary platform for erecting boring machined in river bed As directed by One Number 21267 7372
and DPR to the depth of standing water 1m to 2m and of size 3.50 x 4.00 M by using 20 Nos. of Engineer in charge
M.S. empty barrels in M.S. frame made of M.S. angle size 50 x 50 x 5 mm with
fabrication and over it a jungle wood planks platform of size 3.50 x 4.00 x 0.03 M size
including supplying of nylon rope 24 mm dia. for anchoring platform include passage
platform and enganging a labour etc. complete. 1 m to 2 m
51 Road Survey 1.52 Providing and maintaining temparory platform for erecting boring machined in river bed As directed by One Number 21810 7372
and DPR to the depth of standing water 2 m and above and of size 3.50 x 4.00 M by using 20 Nos. Engineer in charge
of M.S. empty barrels in M.S. frame made of M.S. angle size 50 x 50 x 5 mm with
fabrication and over it a jungle wood planks platform of size 3.50 x 4.00 x 0.03 M size
including supplying of nylon rope 24 mm dia. for anchoring platform include passage
platform and enganging a labour etc. complete. 2 m and Above.
52 Road Survey 1.53 Providing and maintaining temparory platform for inspection from one bank to another As directed by One Number 20033 11093
and DPR bank of bore location in river bed in all depth of standing water of size 1.30 x 2.00 M by Engineer in charge
using 4 Nos. of M.S. empty barrels in M.S. frame made of M.S. angle size 50 x 50 x 5
mm with fabrication and over it a jungle wood planks platform of size 1.30 x 2.00 x 0.03
M size including supplying of nylon rope 24 mm dia. and 300 M length of movement of
platform enganging a labour on inspection days etc. complete.
Page 19
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
53 Road Survey 1.54 Conveying the boring machine and engine and all its accessories etc. to the site of the As directed by One Kilometre 68 15
and DPR work and back including loading unloading etc. complete. ( Note - Distance to be Engineer in charge
measured from the station of boring machine engine etc. of district head quarters to site of
the work by short route ).
54 Road Survey 1.55 Shifting boring plant with all its components and reinstalling the same at the directed As directed by Shift 9067 8411
and DPR place including all its charges etc. complete. Engineer in charge
55 Road Survey 1.56 Providing detailed reports of the inspection logging of drilled hole by observing visual As directed by One Number 9680 0
and DPR description of data as per depth, thickness of layer, type of sample, wash sample, bore Engineer in charge
recovery type of drill etc. complete.
56 Road Survey 1.57 Providing detailed geological reports of proposed site by maintaining geotechnical As directed by Report 38720 0
and DPR investigation of structure stratification collecting soil, rock and ground water samples for Engineer in charge
laboratory tests to arrive the foundation design parameters . Rock properties such as type
of rock, jointing fractures, etc. complete with suggestion about the site foundation and
remedies.
57 Road Survey 1.58 Preparing land plans and land schedule including carrying out plane table survey for As directed by One Kilometre 42184 15312
and DPR Private / Forest land on both side of road in Rural and Urban areas. The work of plotting Engineer in charge
and certificate from T.I.L.R. or other authorities shall be obtained from correctness of
prepared plans. Tracing ang taking out prints and preparing the requisite booklets duly
bounds and printing with all materials etc. Three land plan booklets along with original
tracing shall be supplied including procurement of village maps / forest land plans from
concern authorities.Note : The item plane table includes following points 1 ) Carrying out
plane table survey. 2) Plotting of duly surveyed area . 3) Collection of data from D.I.L.R.
authorities and verification of survey maps by D.I.L.R. authorities . 4) Preparing three
booklets of survey maps including taking out prints of survey maps, binding etc. 5)
Carrying out plane table survey of the Private / Forest land along the road upto 30 meters
on either side from the road centre.
58 Road Survey 1.59 Geometrical design of road horizontal and vertical curves for design speed specified by As directed by One Kilometre 12738 4461
and DPR IRC including carrying out trail for optimising of civil cost minimising land acquisition Engineer in charge
and maximum use of existing facility and preparation of widening arrangement drawing
for insisting structures stake out date for horizontal alignment and working levels
including super elevation effect etc. complete.
59 Road Survey 1.60 Transfering and taking out design on coordinates of baseline on ground using nails for As directed by One Kilometre 13115 7111
and DPR exsisting road surfaces and survey pegs for new alignments including taking out Engineer in charge
coordinates for horizontal curves at required interval of 50 meters etc. complete. ( Extra
line such as right of way median edges to toe line not included).
Page 20
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
60 Road Survey 1.61 Preparation of roadway, drawing (Plan And Profile ) on computer by using Autocad of As directed by One Kilometre 11201 8364
and DPR required scale showing all topo feature and proposed construction details such as carriage Engineer in charge
way , median service road, toe line, retaining walls, cross drainage works, major
structures, etc. complete. Including indexing, level tables, legend, basic information of
project and design details etc.
61 Road Survey 1.62 Preparation of Engineering drawing as strip plan, widening scheme, index / key map, As directed by One Kilometre 9982 7145
and DPR typical cross section, retaining walls, road furniture, general arrangement drawings for bus Engineer in charge
bays / truck lay-bays / rest areas / toll plaza / booths / and type drawing of pipe/ slab drains
etc. on computer using Auto CAD.
62 Road Survey 1.63 Survey of C.D. works including taking L-Section of road, catchment area plan by Traverse As directed by One Number 10047 7366
and DPR method and taking trial pits of size 1.50M x 1.50M x 1.50M including preparation of Engineer in charge
detailed plans and estimates in 5 copies and all types of compliance if required from the
department.
63 Road Survey 1.64 Design of junctions including detail layout of traffic signs, informatory boards traffic As directed by One Number 29951 20102
and DPR islands. Breaks in median verge including working levels at junctions as per IRC Engineer in charge
standards etc. complete. a) Major Junction
64 Road Survey 1.65 Design of junctions including detail layout of traffic signs, informatory boards traffic As directed by One Number 16939 9767
and DPR islands. Breaks in median verge including working levels at junctions as per IRC Engineer in charge
standards etc. complete. b) Minor Junction
65 Road Survey 1.66 Preparaion of initial design of flyovers with preparing General Arrangement drawing with As directed by One Running 881 151
and DPR dimensions etc. complete and preparation of rough estimate for all components of bridge. Engineer in charge Metre
Including supplying four copies of coloured drawings and copy of drawing on C.D. (
excluding geotechnical and structural design part.)
66 Road Survey 1.67 Preparation of draft / Final Report comprising of technical, financial economic feasibility As directed by One Number 293450 217946
and DPR and environmental aspects of the project including executive summary and detailed Engineer in charge
chapters on necessity and introduction of project existing and future traffic, design
philosophy scope of work, summary of available cost estimates justification for rates
adopted, key points of execution, salient features of the project, location of toll plaza, toll
rate / policy to be adopted and specification of major construction items etc. in 8 copies
having attractive cover and binding s directed by engineer in charge etc. complete.
67 Road Survey 1.68 Preparation of Autocad drawing with colour print for Building / Bridge / Road/ CD Works As directed by One Number 9895 9169
and DPR in required size etc. complete. - A-0 Size Engineer in charge
68 Road Survey 1.69 Preparation of Autocad drawing with colour print for Building / Bridge / Road/ CD Works As directed by One Number 6097 5613
and DPR in required size etc. complete. A-1 Size Engineer in charge
Page 21
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
69 Road Survey 1.70 Preparation of Autocad drawing with colour print for Building / Bridge / Road/ CD Works As directed by One Number 4668 4305
and DPR in required size etc. complete. A-2 Size Engineer in charge
70 Road Survey 1.71 Autocad drawing with colour print out for Building / Bridge / Road/ CD Works in As directed by One Number 146 0
and DPR required size etc. complete. A-0 Size Engineer in charge
71 Road Survey 1.72 Autocad drawing with colour print out for Building / Bridge / Road/ CD Works in As directed by One Number 97 0
and DPR required size etc. complete. A-1 Size Engineer in charge
72 Road Survey 1.73 Autocad drawing with colour print out for Building / Bridge / Road/ CD Works in As directed by One Number 73 0
and DPR required size etc. complete. A-2 Size Engineer in charge
73 Road Survey 1.74 Autocad drawing with colour print out for Building / Bridge / Road/ CD Works in As directed by One Number 19 0
and DPR required size etc. complete. A-3 Size Engineer in charge
74 Road Survey 1.75 Autocad drawing with colour print out for Building / Bridge / Road/ CD Works in As directed by One Number 13 0
and DPR required size etc. complete. A-4 Size Engineer in charge
75 Road Survey 1.76 Deploying Automated Traffic Count and classification system on Road (Two Lane) in As directed by Per Day 34487 15153
and DPR both direction at designated traffic count post by using High Definition Engineer in charge
Cameras..Collecting the Non Editable Data In DVR System with necessary electronic and
electrical arrangements or inventor of required capacity Classification of data as per
vehicle category as required with the help of software and submitting the the reports to the
concerned department in hard copies as well as in soft copy, including using necessary
technical manpower etc. complete.
A) Up to 7 Days (Two Lane)
76 Road Survey 1.77 Deploying Automated Traffic Count and classification system on Road (One Lane) in As directed by Per Day 26955 13505
and DPR both direction at designated traffic count post by using High Definition Engineer in charge
Cameras..Collecting the Non Editable Data In DVR System with necessary electronic and
electrical arrangements or inventor of required capacity Classification of data as per
vehicle category as required with the help of software and submitting the the reports to the
concerned department in hard copies as well as in soft copy, including using necessary
technical manpower etc. complete.
B) Extra charges for every additional lane (If required)
77 Road Survey 1.78 As directed by Providing of Jeep/vehicle for conveying surey material, Engineers, labours etc. complete As directed by Per Day 3630 0
and DPR Engineer in charge Engineer in charge
Page 22
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
86 Road Sub grade 2.10 MORTH 301 Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including MORTH 301 One Cubic Metre 300 300
dressing section to the required grade, camber and side slopes and conveying the
excavated materials with all lifts upto a lead of 50m. and spreading for embankment or
stacking as directed. By Manual Means. ( Item used only when Quantity is below 10
Cu.m.)
87 Road Sub grade 2.11 MORTH 301 Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including MORTH 301 One Cubic Metre 119 7
dressing section to the required grade, camber and side slopes and conveying the
excavated materials with all lifts upto a lead of 50m. and spreading for embankment or
stacking as directed.
Page 23
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
88 Road Sub grade 2.13 MORTH 301 Excavation for roadway in hard murum and boulder including dressing section to the MORTH 301 One Cubic Metre 139 7
required grade, camber and side slopes and conveying the excavated materials with all lifts
upto a lead of 50m.and spreading for embankment or stacking as directed.
89 Road Sub grade 2.14 MORTH 301 Excavation for roadway in soft rock, including dressing section to the required grade, MORTH 301 One Cubic Metre 177 22
camber and side slopes and conveying the excavated materials with all lifts upto a lead of
50m. and spreading or stacking as directed.
90 Road Sub grade 2.15 MORTH 301 Excavation for roadway in hard rock by controlled blasting including dressing section to MORTH 301 One Cubic Metre 250 25
the required grade, camber and side slopes and conveying the excavated materials with all
lifts upto a lead of 50m. and spreading for embankment or stocking as directed.(Inculding
50% Utilisation of useable Excavated material)
91 Road Sub grade 2.16 MORTH 301 Excavation for roadway in hard rock by wedging and chiselling or line drilling including MORTH 301 One Cubic Metre 1419 400
dressing section to the required grade, camber and side slopes and conveying the
excavated materials with all lifts upto a lead of 50m. and spreading for embankment or
stacking as directed.
92 Road Sub grade 2.18 MORTH 309 Excavation for catch / side water gutter in all sorts of soils to the specified section MORTH 309 One Cubic Metre 119 7
including stacking the excavated stuff in a regular bund and disposing of unsuitable or
excess stuff as directed all sorts of soils.
93 Road Sub grade 2.20 MORTH 309 Excavation for catch / side water gutter in Hard murum and boulder strata to the specified MORTH 309 One Cubic Metre 139 7
section including stacking the excavated stuff in a regular bund and disposing of
unsuitable or excess stuff as directed.
94 Road Sub grade 2.21 MORTH 309 Excavation for catch / side water gutter in Soft rock strata to the specified section MORTH 309 One Cubic Metre 208 22
including stacking the excavated stuff in a regular bund and disposing of unsuitable or
excess stuff as directed.
95 Road Sub grade 2.22 MORTH 309 Excavation for catch / side water gutters in Hard rock strata to the specified section MORTH 309 One Cubic Metre 1419 400
including stacking the excavated stuff in a regular bund by chiselling and wedging and
disposing of unsuitable or excess stuff as directed.
96 Road Sub grade 2.23 MORTH 305 Watering and compacting of embankment formed of materials obtained from the road MORTH 305 One Cubic Metre 91 4
cutting within a lead of 50 m, not less than 97 % of standard Proctor density after laying
them in layers of 20 cm. to 30 cm. with vibratory roller.
97 Road Sub grade 2.24 MORTH 305 Watering and compacting of embankment formed of materials obtained from the road MORTH 305 One Cubic Metre 79 4
cutting within a lead of 50 m, not less than 97% of standard Proctor density after laying
them in layers of 20 cm. to 30 cm. with Power roller.
98 Road Sub grade 2.25 MORTH 305 Conveying materials obtained from road cutting including all lifts, laying in layers of MORTH 305 One Cubic Metre 195 89
20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section,
watering and compacting to not less than 97% of standard Proctor density for a lead of
over 50m. to 300m. inclusive from the site of excavation to the site of deposition as
directed.
Page 24
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
99 Road Sub grade 2.26 MORTH 305 Conveying materials obtained from road cutting including all lifts, laying in layers of MORTH 305 One Cubic Metre 393 208
20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section,
watering and compacting to not less than 97% of standard proctor density for a lead of
300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed.
100 Road Sub grade 2.27 MORTH 305 Providing earth work in embankment with approved materials obtained from departmental MORTH 305 One Cubic Metre 225 8
land upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness
breaking clods, dressing to the required lines, curves, grades & section, watering and
compaction with vibratory roller to achieve not less than 97 % of standard proctor density
etc. complete ( Material obtained from departmental Land)
101 Road Sub grade 2.28 MORTH 305 Providing earth work in embankment with approved materials obtained from other MORTH 305 One Cubic Metre 757 8
sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness
breaking clods, dressing to the required lines, curves, grades & section, watering and
compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of
standard proctor density etc. complete ( Material obtained from Other sources)
102 Road Sub grade 2.29a Supplying hard murum/ kankar at the road site, including conveying and stacking One Cubic Metre 435 53
complete.
103 Road Sub grade 2.29b Supplying soft murum at the road site, including conveying and stacking complete. One Cubic Metre 432 53
104 Road Sub grade 2.30 Spreading hard murum/ soft murrum/ gravel or kankar for side width complete One Cubic Metre 79 79
105 Road Sub grade 2.31 Compacting the hard murum side widths including laying in layers on each side with One Square 21 4
vibratory roller including artificial watering etc. complete. Metre
106 Road Sub grade 2.32 Picking the road surface including sectioning etc. complete (WBM surface.) One Square 31 13
Metre
107 Road Sub grade 2.33 Picking the road surface including sectioning etc. complete (BT surface.) One Square 44 13
Metre
108 Road Sub grade 2.34 Providing dry rubble stone pitching 23 cm (about 9 ) thick including all material, quarry One Square 413 115
spalls, labour etc. complete. Metre
109 Road Sub grade 2.35 MORTH 402 Providing, laying and spreading soil on a prepared sub grade, pulverizing, mixing the MORTH 402 One Cubic Metre 596 31
spread soil in place with rotavator with 3 per cent slaked lime with minimum content of
70 per cent of CaO, grading with motor grader and compacting with the road roller at
OMC to achieve atleast 98 per cent of the max dry density to form a layer of sub base.
Page 25
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
110 Road Sub grade 2.36 MORTH 402 Providing, laying and spreading soil on a prepared sub grade, pulverizing, adding the MORTH 402 One Cubic Metre 818 31
designed quantity of cement to the spread soil, mixing in place with rotavator, grading
with the motor grader and compacting with the road roller at OMC to achieve the desired
unconfined compressive strength and to form a layer of sub-base/base.
111 Road Sub grade 2.37 MORTH 402 Laying and spreading available soil in the sub-grade on a prepared surface, pulverizing, MORTH 402 One Cubic Metre 536 23
mixing the spread soil in place with rotavator with 3 per cent slaked lime having minimum
content of 70 per cent of CaO, grading with motor grader and compacting with the road
roller at OMC to the desired density to form a layer of improved sub grade.
112 Road Sub grade 2.39 MORTH 305 Construction of embankment with Flyash conforming to table 1 of IRC: SP: 58 - 2001 MORTH 305 One Cubic Metre 156 9
obtained from coal or lignite burning thermal power stations as waste material, spread and
compacted in layer of 200mm thickness each at OMC, all as specified in IRC: SP: 58-
2001 and as per approved plans.
Page 26
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Page 27
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
119 Road Sub Base 3.07 MORTH 403 Lime, Fly ash Stabilized Soil Sub-Base -- Construction of Sub-base using lime - Fly ash MORTH 403 One Cubic Metre 1403 11
and Base Course admixture with granular soil, free from organic matter/ deleterious material or clayey silts
and low plasticity clays having PI between 5 and 20 and liquid limit less than 25 and
commercial dry lime, slaked at site or pre-slaked with CaO content not less than 50 per
cent, Fly ash to conform to gradation as per clause 4.3 of IRC: 88-1984, lime + Fly ash
content ranging between 10 to 30 per cent, the minimum un-confined compressive
strength and CBR value after 28 days curing and 4 days soaking to be 7.5kg/sq, cm and 25
per cent respectively, all as specified in IRC: 88-1984.
Road Sub Base 3.08 MORTH 404 Cement Treated Crushed Rock or combination as per clause 403.2 and table 400.4 in Sub MORTH 403 One Cubic Metre 0 0
and Base Course base/ Base --Providing, laying and spreading Material on a prepared sub grade, adding the
designed quantity of cement to the spread Material, mixing in place with rotavator,
grading with the motor grader and compacting with the road roller at OMC to achieve the
desired unconfined compressive strength and to form a layer of sub-base/base course.
120 Road Sub Base 3.08a MORTH 403 A) For Sub-base Course MORTH 403 One Cubic Metre 2447 31
and Base Course
121 Road Sub Base 3.08b MORTH 403 B) For Base Course MORTH 404 One Cubic Metre 2351 31
and Base Course
122 Road Sub Base 3.09 MORTH 305.4.3 Scarifying the existing granular road surface to a depth of 50 mm and disposal of MORTH 501.8.2.1 One Square 47 39
and Base Course scarified material within all lifts and leads upto 1000 metres. Metre
123 Road Sub Base 3.10 MORTH 202 Dismantling of flexible pavements and disposal of dismantled materials up to a lead of MORTH 202 One Cubic Metre 430 231
and Base Course 1000 metres, stacking serviceable and unserviceable materials separately etc. complete.
124 Road Sub Base 3.11 MORTH 202 Dismantling of cement concrete pavement by mechanical means using pneumatic tools, MORTH 202 One Cubic Metre 1385 173
and Base Course breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated
locations and disposal of dismantled materials up to a lead of 1000 metres, stacking
serviceable and unserviceable materials separately etc. complete.
125 Road Sub Base 3.12 MORTH 501.8 Making 50 mm x 25 mm furrows, 45 degree to the center line of the road and at one metre MORTH 501.8 One Square 8 8
and Base Course interval in the existing thin bituminous wearing coarse including sweeping and disposal of Metre
excavated material within 1000 metres lead
126 Road Sub Base 3.13 MORTH 501.8 Making 50 mm x 50 mm furrows, 45 degree to the center line of the road and at one metre MORTH 501.8 One Square 16 15
and Base Course interval in the existing thin bituminous wearing coarse including sweeping and disposal of Metre
excavated material within 1000 metres lead
Page 28
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
127 Road Sub Base 3.14 Brooming the W.B.M. surface by wire Brushes, coir brushers, dusting, cleaning etc. for One Square 18 18
and Base Course receiving the bituminous treatment complete. Brooming the water Bound Macadam Metre
surface by wire.
128 Road Sub Base 3.18 MORTH 404 Providing, laying, spreading and compacting stone aggregates of specific sizes to water MORTH 404 One Cubic Metre 2218 37
and Base Course bound macadam specification including spreading in uniform thickness, hand packing to
proper grade and camber, applying and brooming requisite type of screening/ binding
Materials to fill up the interstices of coarse aggregate, watering and compacting with
Vibratory roller. to the required density. By Mechanical Means - Grading I (Using
Screening Type A (13.2) mm Aggregate)
129 Road Sub Base 3.19 MORTH 404 Providing, laying, spreading and compacting stone aggregates of specific sizes to water MORTH 404 One Cubic Metre 2180 37
and Base Course bound macadam specification including spreading in uniform thickness, hand packing to
proper grade and camber, applying and brooming requisite type of screening/ binding
Materials to fill up the interstices of coarse aggregate, watering and compacting with
vibratory roller to the required density. By Mechanical Means -Grading I (Using
Screening Type B (11.2 mm) Aggregate)
130 Road Sub Base 3.20 MORTH 404 Providing, laying, spreading and compacting stone aggregates of specific sizes to water MORTH 404 One Cubic Metre 2180 37
and Base Course bound macadam specification including spreading in uniform thickness, hand packing to
proper grade and camber, applying and brooming requisite type of screening/ binding
Materials to fill up the interstices of coarse aggregate, watering and compacting with
vibratory roller to the required density. By Mechanical Means - Grading II (Using
Screening Type B (11.2 mm) Aggregate)
131 Road Sub Base 3.21 MORTH 405 Crushed Cement Concrete Sub-base / Base - Breaking and crushing of material obtained MORTH 405 One Cubic Metre 414 225
and Base Course by breaking damaged cement concrete slabs to size range not exceeding 75 mm as
specified in table 400.7 transporting the aggregates obtained from breaking of cement
concrete slabs at a lead of 1 km., laying and compacting the same as sub base/ base
course, constructed as WBM to clause 404 except the use of screening or binding material.
132 Road Sub Base 3.22 MORTH 405.2 Penetration Coat Over Top Layer of Crushed Cement Concrete Base -- Spraying of MORTH 405.2 One Square 25 2
and Base Course bitumen over cleaned dry surface of crushed cement concrete base at the rate of 25 kg per Metre
10 sqm by a bitumen pressure distributor, spreading of key aggregates at the rate of 0.13
cum per 10 sqm by a mechanical gritter and rolling the surface as per clause 506.3.8
Page 29
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
133 Road Sub Base 3.23 MORTH 406 Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone MORTH 406 One Cubic Metre 2045 42
and Base Course aggregate to wet mix macadam specification including premixing the Material with water
at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in
uniform layers with paver in sub- base / base course on well prepared surface and
compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver.
134 Road Sub Base 3.24 MORTH 407 Crusher Run Macadam Base -- Providing crushed stone aggregate, depositing on a MORTH 407 One Cubic Metre 1847 26
and Base Course prepared surface by hauling vehicles, spreading and mixing with a motor grader, watering
and compacting with a vibratory roller to clause 410 to form a layer of sub-base/Base --
By Mix in Place Method for 53 mm maximum size
135 Road Sub Base 3.25 MORTH 407 Crusher Run Macadam Base -- Providing crushed stone aggregate, depositing on a MORTH 407 One Cubic Metre 1847 26
and Base Course prepared surface by hauling vehicles, spreading and mixing with a motor grader, watering
and compacting with a vibratory roller to clause 410 to form a layer of sub-base/Base --
By Mix in Place Method for 45 mm maximum size
136 Road Sub Base 3.26 MORTH 407 Crusher Run Macadam Base -- Providing crushed stone aggregate, depositing on a MORTH 407 One Cubic Metre 2099 24
and Base Course prepared surface by hauling vehicles, spreading and mixing with a motor grader, watering
and compacting with a vibratory roller to clause 410 to form a layer of sub-base/Base --
By Mixing Plant Method for 53 mm maximum size
137 Road Sub Base 3.27 MORTH 407 Crusher Run Macadam Base -- Providing crushed stone aggregate, depositing on a MORTH 407 One Cubic Metre 2099 24
and Base Course prepared surface by hauling vehicles, spreading and mixing with a motor grader, watering
and compacting with a vibratory roller to clause 410 to form a layer of sub-base/Base --
By Mixing Plant Method for 45 mm maximum size
138 Road Sub Base 3.28 MORTH 202 Dismantling of existing B.T. Surface (flexible Pavement) to a depth of 50 mm. manually MORTH 202 One Square 28 23
and Base Course including loading of dismantled material to transport vehicle at site excluding lead charges Metre
139 Road Sub Base 3.29 MORTH 502 Prime coat - Providing and applying primer coat with bitumen emulsion on prepared MORTH 502 One Square 33 1
and Base Course surface of granular Base including cleaning of road surface and spraying, primer at the Metre
rate of 0.60 kg/sqm using mechanical means.
140 Road Sub Base 3.30 MORTH 503 Providing and applying tack coat on the prepared surface heating by fames in Boiler and MORTH 503 One Square 18 1
and Base Course spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-30 bulk Metre
bitumen rates are considered to arrive at rates)
141 Road Sub Base 3.31 MORTH 503 Providing and applying tack coat on the prepared surface heating by fames in Boiler and MORTH 503 One Square 21 1
and Base Course spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk Metre
bitumen rates are considered to arrive at rates)
Page 30
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
142 Road Sub Base 3.32 MORTH 503 Providing and applying tack coat on the prepared surface heating by flames in Boiler and MORTH 503 One Square 20 1
and Base Course spraying bitumen with sprayer on Granular surface treated with primer @ 2.75 kg/10 Metre
sqm(VG-30 bulk bitumen rates are considered to arrive at rates)
143 Road Sub Base 3.33 MORTH 503 Providing and applying tack coat on the prepared surface heating by flames in Boiler and MORTH 503 One Square 23 1
and Base Course spraying bitumen with sprayer on Concrete surface treated with primer @ 3.25 kg/10 sqm Metre
(VG-30 bulk bitumen rates are considered to arrive at rates)
144 Road Sub Base 3.34 MORTH 503 Providing and applying tack coat with bitumen emulsion (RS1) using emulsion pressure MORTH 503 One Square 13 1
and Base Course distributer at the rate of 0.20 kg per Sq.M. on the prepared bituminous cleaned with Metre
mechanical broom
145 Road Sub Base 3.35a MORTH 505 Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road IRC-SP-20, 2002 One Square 280 8
and Base Course surface including all materials, preparing the existing road surface, spreading 40 mm. Clause No. 8.7.3 Metre
stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble
obtained by blasting) heating and spraying the bitumen of specified grade @ 2 Kg/sqm,
spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to
10 MT. to achive the desired degree of compaction as per Technical Specification Clause
506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen
rates are considered to arrive at rates)
146 Road Sub Base 3.35b MORTH 505 Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road IRC-SP-20, 2002 One Square 291 8
and Base Course surface including all materials, preparing the existing road surface, spreading 40 mm. Clause No. 8.7.3 Metre
stone metal layers 100% crusher broken metal with conical crusher plant heating and
spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips
compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired
degree of compaction as per Technical Specification Clause 506 etc. complete. Including
picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at
rates)
147 Road Sub Base 3.36a MORTH 505 Providing and constructing 75 mm. thick Modified Penetraction Macadam (MPM) road IRC-SP-20, 2002 One Square 277 3
and Base Course surface including all materials, preparing the existing road surface, spreading 40 mm. Clause No. 8.7.3 Metre
stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking
Rubble obtained by blasting) , heating and spraying the bitumen of specified grade @ 2
kg / sqm , spreading 12mm.size chips compacting with three wheel static roller having
weight 8 to 10 MT. to achive the desired degree of compaction as per Technical
Specification Clause 506 etc.complete, including applying tack coat of specified grade of
bitumen at the rate of 0.30 Kg Sqm. on existing bitumen surface. (VG-30 bulk bitumen
rates are considered to arrive at rates)
Page 31
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
148 Road Sub Base 3.36b MORTH 505 Providing and constructing 75 mm. thick Modified Penetraction Macadam (MPM) road IRC-SP-20, 2002 One Square 289 3
and Base Course surface including all materials, preparing the existing road surface, spreading 40 mm. Clause No. 8.7.3 Metre
stone layers metal 100% crusher broken metal with conical crusher plant , heating and
spraying the bitumen of specified grade @ 2 kg / sqm , spreading 12mm.size chips
compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired
degree of compaction as per Technical Specification Clause 506 etc.complete, including
applying tack coat of specified grade of bitumen at the rate of 0.30 Kg Sqm. on existing
bitumen surface. (VG-30 bulk bitumen rates are considered to arrive at rates)
149 Road Sub Base 3.37a MORTH 505 Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road IRC-SP-20, 2002 One Square 210 9
and Base Course surface including all mataerials, preparing the existing road surface, spreading 40mm. Clause No. 8.7.3 Metre
stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble
obtained by blasting) heating and spraying the bitumen of specified grade @ 1.75
kg/sqm, spreading 12mm.size chips compacting with static roller having weight 8 to 10
MT. to achive the desired degree of compaction as per Technical Specification Clause 506
etc. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates
are considered to arrive at rates)
150 Road Sub Base 3.37b MORTH 505 Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road IRC-SP-20, 2002 One Square 218 9
and Base Course surface including all mataerials, preparing the existing road surface, spreading 40mm. Clause No. 8.7.3 Metre
stone metal layers 100% crusher broken metal with conical crusher plant heating and
spraying the bitumen of specified grade @ 1.75 kg/sqm, spreading 12mm.size chips
compacting with static roller having weight 8 to 10 MT. to achive the desired degree of
compaction as per Technical Specification Clause 506 etc. complete. Including picking
of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates)
151 Road Sub Base 3.38a MORTH 505 Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road IRC-SP-20, 2002 One Square 223 2
and Base Course surface including all materials, preparing the existing road surface, spreading 40mm. stone Clause No. 8.7.3 Metre
layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble
obtained by blasting) , heating and spraying the bitumen of specified grade @ 1.75 kg /
sqm, spreading 12mm.size chips compacting with Static roller having weight 8 to 10 MT.
to achive the desired degree of compaction as per Technical Specification Clause 506
etc.complete, including applying tack coat of bitumen 0f specified grade at the rate of 0.30
Kg Sqm.(on existing bitumen surface.)
Page 32
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
152 Road Sub Base 3.38b MORTH 505 Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road IRC-SP-20, 2002 One Square 231 2
and Base Course surface including all materials, preparing the existing road surface, spreading 40mm. stone Clause No. 8.7.3 Metre
layers metal 100% crusher broken metal with conical crusher palnt, heating and spraying
the bitumen of specified grade @ 1.75 kg / sqm, spreading 12mm.size chips compacting
with Static roller having weight 8 to 10 MT. to achive the desired degree of compaction as
per Technical Specification Clause 506 etc.complete, including applying tack coat at the
rate of 0.30 Kg Sqm.on existing bitumen surface. (VG-30 bulk bitumen rates are
considered to arrive at rates)
153 Road Sub Base 3.39 MORTH 504 Providing, laying and compacting of Built-up-spray grout layer 75 mm thick over prepared MORTH 504 One Square 342 3
and Base Course base consisting of two layers composite construction of compacted crushed coarse Metre
aggregates with application of bituminous binder of biyumen of specified Grade @ 1.520
Kg/ Sqm after each layer, ( i.e 1.520x2=3.04 say 3.00 Kg/Sqm) and with key aggregates
placed on top of the second layer and compacting with static roller 8 to 10 MT. Excluding
cost of tack coat and scarifying etc. Complete.(VG-30 bulk bitumen rates are considered
to arrive at rates)
154 Road Sub Base 3.40 MORTH 504 BITUMINOUS MACADAM: Proving and laying bituminous macadam using crushed MORTH 504 One Cubic Metre 7644 81
and Base Course aggregates of Grading 1, premixed with bituminous binder, transported to site with VTS ,
laid over a previously prepared surface, finished to the required grade, level, alignment,
and rolling to achieve the desired compaction for 80/100 mm compacted thickness with
3.3 % using specified grade of Bitumen. -- USING Batch mix type hot mix plant with
SCADA, Sensor Paver, vibratory roller.(VG-30 bulk bitumen rates are considered to
arrive at rates)
155 Road Sub Base 3.42 MORTH 504 BITUMINOUS MACADAM:--Providing and laying bituminous macadam using crushed MORTH 504 One Cubic Metre 7295 81
and Base Course aggregate of Grading 1, premixed with bituminous binder, transported at site with VTS,
laid over a previously prepared surface , finished to the required grade ,level,
alignment,and rolling to achieve the desired density for 80/100 mm compacted thickness
with drum mix type hot mix plant with SCADA having complying essential features of
Hot mix plant as per IRC-27 2009 specified conditions and attachments such as electronic
load sensor based belt conveyers,automatic synchronization of bitumen and aggregate
fedder,built in dust controller system and PLC for Drum Mix plant ,Sensor paver,and
Vibratory roller excluding prime/Tack coat etc. complete --Bitumen 3.30% of specified
grade (VG-30 bulk bitumen rates are considered to arrive at rates)
Page 33
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
156 Road Sub Base 3.44 MORTH 505 DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam MORTH 505 One Cubic Metre 9664 85
and Base Course using crushed aggregates of Grading 1, premixed with bituminous binder of specified
grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site
with VTS , laid over a previously prepared surface, finished to the required grade, level,
alignment, and rolling to achieve the desired density for 76-100 mm compacted thickness
.USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with
Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates)
157 Road Sub Base 3.46 MORTH 505 DENSE BITUMINOUS MACADAM:--Providing and laying dense bituminous macadam MORTH 505 One Cubic Metre 9178 85
and Base Course using crushed aggregate of grading 1, premixed with bituminous binder Bitumen of
specified grade,@ 4.50 % by weight of total mix and filler, transported at site with VTS,
laid over a previously prepared surface , finished to the required grade ,level,
alignment,and rolling to achieve the desired density for 76/100 mm compacted thickness
with drum mix type hot mix plant with SCADA having complying essential features of
Hot mix plant as per IRC-27-2009 specified conditions and attachments such as electronic
load sensor based belt conveyers, automatic synchronization of bitumen and aggregate
fedder,built in dust controller system and PLC for Drum Mix plant ,Sensor paver, and
Vibratory roller excluding prime/Tack coat etc. complete --Bitumen VG-30 grade with
stone dust filler (VG-30 bulk bitumen rates are considered to arrive at rates)
158 Road Sub Base 3.48 MORTH 507 BITUMINOUS CONCRETE:- Providing and laying bituminous concrete using crushed MORTH 507 One Cubic Metre 10599 86
and Base Course aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of
total mix and filler, transported to site with VTS , laid over a previously prepared surface,
finished to the required grade, level, alignment, and rolling to achieve the desired
compaction for 50 mm compacted thickness with specified grade of Bitumen,Excluding
prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant
with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. (VG-30 bulk bitumen
rates are considered to arrive at rates)
159 Road Sub Base 3.50 MORTH 507 BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed MORTH 509 One Cubic Metre 10627 86
and Base Course aggregate of grading 1, premixed with bituminous binder @5.40% by weight of total mix
and filler, transported at site with VTS, laid over a previously prepared surface, finished to
the required grade ,level, alignment, and rolling to achieve the desired density for 50mm
compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory
roller excluding prime/Tack coat etc. complete --Bitumen of specified grade with stone
dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates)
Page 34
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
163 Road Surfacing 4.05 MORTH 509 Surface Dressing -- Providing and laying surface dressing as wearing course in single coat MORTH 509 One Square 80 1
Course using crushed stone aggregates of specified size on a layer of bituminous binder laid on Metre
prepared surface and rolling with 8-10 tonne smooth wheeled steel roller. --
b) 13 mm nominal chippling size (bitumen 10.00 kg/10 Sq.M -- Bitumen of specified
grade (VG-30 bulk bitumen rates are considered to arrive at rates)
164 Road Surfacing 4.06 MORTH 509 Surface Dressing -- Providing and laying surface dressing as wearing course in single coat MORTH 509 One Square 74 1
Course using crushed stone aggregates of specified size on a layer of bituminous binder laid on Metre
prepared surface and rolling with 8-10 tonne smooth wheeled steel roller. --
c) 10 mm nominal chippling size (bitumen 9.0 kg/10 Sq.M -- Bitumen of specified grade
(VG-30 bulk bitumen rates are considered to arrive at rates)
165 Road Surfacing 4.07 MORTH 509 Surface Dressing -- Providing and laying surface dressing as wearing course in single coat MORTH 509 One Square 65 1
Course using crushed stone aggregates of specified size on a layer of bituminous binder laid on Metre
prepared surface and rolling with 8-10 tonne smooth wheeled steel roller. --
d) 6 mm nominal chippling size (bitumen 7.50 kg/10 Sq.M -- Bitumen of specified grade
(VG-30 bulk bitumen rates are considered to arrive at rates)
166 Road Surfacing 4.11 MORTH 510 Surface Dressing -- Providing and laying surface dressing as wearing course in single coat MORTH 510 One Square 179 5
Course using crushed stone aggregates of specified size on a layer of bituminous binder laid on Metre
prepared surface and rolling with 8-10 tonne smooth wheeled steel roller. -
Page 35
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
167 Road Surfacing 4.12 MORTH 510 Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed MORTH 510 One Square 193 5
Course of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site Metre
with VTS , laid over a previously prepared surface, finished to the required grade, level,
alignment, and rolling to achieve the desired compaction but excluding prime / tack and
Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with
SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are
considered to arrive at rates)
168 Road Surfacing 4.13 MORTH 511 9 MM SEAL COAT: Providing and laying of Type A 9mm premix seal coat with HMP of MORTH 511 One Square 116 6
Course apropriate capacity crushed stone chiping 6.7 mm size and penetration bitumen of Metre
specified grade @ 1.2kg/Sq.m, preparing existing road surface by mechanical means,
spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete.(VG-
30 bulk bitumen rates are considered to arrive at rates)
Page 36
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
170 Rigid Pavement 5.02 MORTH 602 Providing and laying in-situ M35 Grade unreinforced plain cement concrete pavement MORTH 602 One Cubic Metre 7698 205
over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/
VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse
aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed
in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix
design, admixtures, transporting to site, spreading, laying with approved make
paver,compacted and finished in a continuous operation, finishing to lines and grades as
directed by Engineer-in-charge and curing by curing compound /by providing cement
vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom
and 40 mm at top with depth of 75mm and maintaining the same throughout curing
period by any other method approved by Engineer-in-charge. with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch
mix plant (Pan mixer) etc. complete.
Page 37
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
171 Rigid Pavement 5.03 MORTH 602 Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement MORTH 602 One Cubic Metre 7793 205
over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/
VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse
aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed
in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix
design, admixtures, transporting to site, spreading, laying with approved make
paver,compacted and finished in a continuous operation, finishing to lines and grades as
directed by Engineer-in-charge and curing by curing compound /by providing cement
vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom
and 40 mm at top with depth of 75mm and maintaining the same throughout curing
period by any other method approved by Engineer-in-charge. with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch
mix plant (Pan mixer) etc. complete.
172 Rigid Pavement 5.04 MORTH 602 Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement MORTH 602 One Cubic Metre 7736 1007
over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/
VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse
aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed
in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading,
laying compacting and finished in a continuous operation without paver machine,
finishing to lines and grades as directed by Engineer-in-charge and curing by curing
compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to
centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and
maintaining the same throughout curing period by any other method approved by
Engineer-in-charge. with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.
Page 38
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
173 Rigid Pavement 5.05 MORTH 602 Providing and laying in-situ M35 Grade unreinforced plain cement concrete pavement MORTH 602 One Cubic Metre 7858 1007
over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/
VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse
aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed
in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading,
laying compacting and finished in a continuous operation without paver machine,
finishing to lines and grades as directed by Engineer-in-charge and curing by curing
compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to
centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and
maintaining the same throughout curing period by any other method approved by
Engineer-in-charge. with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.
174 Rigid Pavement 5.06 MORTH 602 Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement MORTH 602 One Cubic Metre 7954 1007
over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/
VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse
aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed
in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading,
laying compacting and finished in a continuous operation without paver machine,
finishing to lines and grades as directed by Engineer-in-charge and curing by curing
compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to
centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and
maintaining the same throughout curing period by any other method approved by
Engineer-in-charge. with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.
Page 39
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
175 Rigid Pavement 5.07 MORTH 602 Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement MORTH 602 One Cubic Metre 7161 210
with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base
with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed
crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation
as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/
non tilting mixer and Weigh batcher as per approved mix design, admixtures,
transporting to site, spreading, laying with approved make paver,compacted and finished
in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge
and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m
X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of
75mm and maintaining the same throughout curing period by any other method approved
by Engineer-in-charge.
176 Rigid Pavement 5.08 MORTH 602 Providing and laying in-situ M35 Grade unreinforced plain cement concrete pavement MORTH 602 One Cubic Metre 7262 205
with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base
with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed
crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation
as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/
non tilting mixer and Weigh batcher as per approved mix design, admixtures,
transporting to site, spreading, laying with approved make paver,compacted and finished
in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge
and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m
X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of
75mm and maintaining the same throughout curing period by any other method approved
by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.
Page 40
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
177 Rigid Pavement 5.09 MORTH 602 Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement MORTH 602 One Cubic Metre 7346 205
with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base
with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed
crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation
as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/
non tilting mixer and Weigh batcher as per approved mix design, admixtures,
transporting to site, spreading, laying with approved make paver,compacted and finished
in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge
and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m
X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of
75mm and maintaining the same throughout curing period by any other method approved
by Engineer-in-charge.
178 Rigid Pavement 5.10 MORTH 602 Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement MORTH 602 One Cubic Metre 7337 1034
with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base
with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed
crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation
as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete
Mixer as per approved mix design, admixtures, spreading, laying compacting and finished
in a continuous operation without paver machine, finishing to lines and grades as directed
by Engineer-in-charge and curing by curing compound /by providing cement vata in
cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40
mm at top with depth of 75mm and maintaining the same throughout curing period by
any other method approved by Engineer-in-charge. with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant
(Pan mixer) etc. complete.
Page 41
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
179 Rigid Pavement 5.11 MORTH 602 Providing and laying in-situ M35 Grade unreinforced plain cement concrete pavement MORTH 602 One Cubic Metre 7444 1034
with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base
with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed
crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation
as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete
Mixer as per approved mix design, admixtures, spreading, laying compacting and finished
in a continuous operation without paver machine, finishing to lines and grades as directed
by Engineer-in-charge and curing by curing compound /by providing cement vata in
cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40
mm at top with depth of 75mm and maintaining the same throughout curing period by
any other method approved by Engineer-in-charge.
180 Rigid Pavement 5.12 MORTH 602 Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement MORTH 602 One Cubic Metre 7529 1034
with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base
with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed
crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation
as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete
Mixer as per approved mix design, admixtures, spreading, laying compacting and finished
in a continuous operation without paver machine, finishing to lines and grades as directed
by Engineer-in-charge and curing by curing compound /by providing cement vata in
cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40
mm at top with depth of 75mm and maintaining the same throughout curing period by
any other method approved by Engineer-in-charge. with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant
(Pan mixer) etc. complete.
Page 42
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
181 Rigid Pavement 5.13 MORTH 601 Construction of dry lean cement concrete Sub- base over a prepared sub-grade with MORTH 601 One Cubic Metre 3659 53
coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand)
conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement
content not to be less than 150 kg/ cum, optimum moisture content to be determined
during trial length construction, concrete strength not to be less than 10 Mpa at 7 days,
mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts,
laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-
charge , compacting with vibratory roller, finishing, curing and including preparation of
sub-grade surface if required etc. complete. with fully automatic micro processor based
PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan
mixer) etc. complete.
182 Rigid Pavement 5.14 MORTH 602.6.5 Providing and fixing in position TMT FE 500, 32 mm dia dowel bars precoated with MORTH 602.6.5 One Number 538 156
anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and
wherever directed including handling, straightening, necessary cutting supported by TMT
FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads
lubricating half length with bituminous paint as directed etc. complete.
183 Rigid Pavement 5.15 MORTH 602.6.5 Providing and fixing in position TMT FE 500, 25mm dia dowel bars precoated with MORTH 602.6.5 One Number 394 156
anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and
wherever directed including handling, straightening, necessary cutting supported by TMT
FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads
lubricating half length with bituminous paint as directed etc. complete.
184 Rigid Pavement 5.16 MORTH 602.6.4.2 Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy MORTH 602.6.4.2 One Number 306 156
paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C and wherever directed including
handling, straightening wrapping with paper of approved quality for half length, necessary
cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with
proper alignment etc. complete.
185 Rigid Pavement 5.17 MORTH 602.6.3 & Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab MORTH 602.6.3 & One Running 76 19
602.6.4 using concrete cutting machine with diamond studded saw within 48 hours of casting of 602.6.4 Metre
bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at
top having depth of 15 mm. as directed by Engineer incharge.
Page 43
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
186 Rigid Pavement 5.18 MORTH 602.6.3 & Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : MORTH 602.6.3 & One Running 311 29
602.6.4 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and 602.6.4 Metre
shape as per detailed drawing including fixing Polyethylene foam backer rod of required
diameter (appraox. 25% larger than the initial 3 mOne Metric Tonneo 4 mm. joint)
overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints
with water jet / air compressor and allowing joint to become thoroughly dry before sealent
is applied and applying primer.
(A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide)
187 Rigid Pavement 5.19 MORTH 602.5 Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to MORTH 602.5 One Square 30 8
IS 3395 : 1997 below concrete pavement including all materials and labour complete. Metre
188 Rigid Pavement 5.20 As directed by Providing and fixing factory made Hydraulically pressed Mechanically vibrated and IRC-SP-63 One Square 1153 100
Engineer Incharge compacted precast inter locking cement concrete paving blocks 80MM thick in M-40 Metre
grade of approved size and shape for City streets, small /medium market roads,low
volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006
including cost of all materials, manufacturing, curing, transportation of blocks to work site
including loading, unloading and stacking as directed, laying paving blocks in position
over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary
excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting
blocks by plate vibrator etc. complete.
189 Rigid Pavement 5.21 As directed by Providing and fixing factory made Hydraulically pressed Mechanically vibrated and IRC-SP-63 One Square 1173 118
Engineer Incharge compacted precast inter locking cement concrete paving blocks 100MM thick in M-50 Metre
grade of approved size and shape for City streets and roads with high volume/ heavy
traffice as specified and as per IS 15658:2006 including cost of all materials,
manufacturing, curing, transportation of blocks to work site including loading, unloading
and stacking as directed, laying paving blocks in position over prepared bed of natural
sand / crushed sand of 50 mm thickness including necessary excavation in all stratas,
spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator
etc. complete.
190 Rigid Pavement 5.22 As directed by Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm MORTH 602 One Cubic Metre 8446 2049
Engineer Incharge thickness for Concrete Road is including laying plastic sheet for 125 micron thickness
with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen
( excluding reinforcement) with coarse and fine aggregate ( natural sand/ VSI grade finely
washed crushed sand) etc. complete with fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.
complete.
Page 44
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
191 Rigid Pavement 5.22 b As directed by Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm MORTH 602 One Cubic Metre 8636 2049
Engineer Incharge thickness for Concrete Road is including laying plastic sheet for 125 micron thickness
with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with
polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove
widened at top for sealent reservoir of specified size and shape as per detailed drawing
including fixing Polyethylene foam backer rod of required diameter ( excluding
reinforcement) with coarsen and fine aggregate Using V.S.I.Quality Artifitial Sand etc.
complete with fully automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.
Page 45
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
192 Road Furniture a MORTH 805 RCC 200 meter Stone in CC 1:4:8 MORTH 805 One Number 1027 371
193 Road Furniture b 124.80 Kg/M3 Fixing 1:2:4 ordinary km. stones in C.C. 1:4:8 MORTH 805 One Number 3249 1110
194 Road Furniture c MORTH 805 Fixing R.C.C. 5th Km. stones, in c.c. 1:4:8 MORTH 805 One Number 5355 2048
Road Furniture 6.03 MORTH 202 Dismantling of __________Stone including cutting of earth, foundation and disposal of
dismantled material with all lifts and lead upto 1000 m and back filling of pit.
195 Road Furniture a MORTH 202 Dismantling 5th Km. Stone MORTH 805 One Number 737 549
196 Road Furniture b MORTH 202 Ordinary Km. Stone MORTH 805 One Number 437 321
197 Road Furniture c MORTH 202 Hectometer Stone MORTH 805 One Number 87 64
Road Furniture 6.04 MORTH 805.1 Painting with approved enamel paint in two coats including cleaning surface and lettering
for________ stone etc. complete.
198 Road Furniture a MORTH 805.1 200 Mt. Stone MORTH 805.1 One Number 147 108
199 Road Furniture b MORTH 805.1 Ordinary Kilometer Stone MORTH 805.1 One Number 509 339
200 Road Furniture c MORTH 805.1 Lettering of Fifth Km. Stone MORTH 805.1 One Number 518 265
201 Road Furniture d MORTH 805.1 Lettering of Boundary Stone MORTH 807 One Number 43 20
202 Road Furniture e MORTH 801 Lettering for cautionary/ mandatory sign boards and village name boards MORTH 801 One Number 203 129
203 Road Furniture f MORTH 801 Lettering for informatory sign boards etc. complete. MORTH 801 One Number 253 163
204 Road Furniture g MORTH 801 Lettering on masonry works with nalla flow direction, span One Number and location etc. MORTH 801 One Number 30 17
complete.
205 Road Furniture 6.05 MORTH 801 Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, MORTH 801 One Number 29 23
including cost of paint etc. complete.
206 Road Furniture 6.06 MORTH 801 Painting and One Numbering trees with white background and black lettering etc. MORTH 801 One Number 31 25
complete.
207 Road Furniture 6.07 MORTH 801 Providing white and colour washing to road side trees in 2 coats in 2 bands of white and MORTH 801 One Number 57 35
one red band at centre of 30 cm height each including preparing the surface, cost of
material, conveying etc. complete.
Road Furniture 6.08 MORTH 801 Painting Line, Dashes, Arrows etc on Roads in two coats on new work with ready mixed
road marking paint confirming to I.S. 164 on Bituminous surface including cleaning the
surface of all dirt, dust and other foreign matter, demarcation at site and traffic control
(Over/Upto __cm wide) (MORTH-803) --______ Surface
208 Road Furniture a MORTH 801 Over 10cm Wide On New Surface MORTH 803 One Square 196 139
Meterr
209 Road Furniture b MORTH 801 Upto 10 cm Wide On Old Surface MORTH 803 One Square 164 111
Meterr
Page 46
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
210 Road Furniture c MORTH 801 Over 10cm Wide On Old Surface MORTH 803 One Square 140 101
Meterr
211 Road Furniture d MORTH 801 Upto 10 cm Wide On Old Surface MORTH 803 One Square 152 111
Meterr
212 Road Furniture 6.09 MORTH 806 Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of MORTH 804 One Number 366 82
polycarbonate and ABS moulded body and reflective panels with micro prismatic lens
capable of providing total internal reflection of the light entering the lens face and shall
support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying
to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt
11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2
mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base
shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks,
(of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body
is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the
shanks to go inside, without nails and using epoxy resin based adhesive as per
manufacturer's recommendation and complete as directed by the engineer.The contractor
shall submit a two year warranty for satisfactory field performance including stipulated
retro-reflectance of the reflecting panel, to the Engineer.
213 Road Furniture 6.10 MORTH 806 Providing and Fixing of Median Marker that are made of tough, high impact resistant, MORTH 806 One Number 458 29
injection-molded, thermoplastic body with an isosceles trapezoidal structure of length,
width and height not less than 15cm, 10cm and 10cm respectively and thickness not less
than 1.8mm, the body structure shall be rounded at its acute angle, all the corners and
edges. The plastic used for molding the Median Marker shall have a minimum Notched
Izod Impact strength value of 600 J/m at room temperature, when tested in accordance
with ASTM D256 and shall retain at least 70% of this value when subjected to accelerated
weathering for 1000hrs as per ASTM G155 or UL746C. The logo of the manufacturer
shall be embossed on either side of the body in the injection molding process. The Median
Marker shall have rectangular-shaped, fluorescent yellow color retro-reflective sheeting of
size not less than 8.5cm*8.5cm and with fully reflective micro prismatic cube corners as
its retro-reflective elements as per IRC 67 2010 and ASTM D4956 type XI specifications
reflectivity values. The retro-reflective sheeting shall be one or both sides of the Median
Marker and shall be edge protected with no exposed edges which will prevent edge lifting,
vandalism, sheeting damage, etc. The Median Marker shall be fixed by a combination of
epoxy adhesive and grouting.
Page 47
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
214 Road Furniture 6.11 MORTH 804 Providing and fixing reflective fluorescent tape on old road sign board by following the MORTH 804 One Square 5297 1907
procedure recommanded by manufacturer.Tape shall be consist of white or coloured Meterr
sheeting having smooth outer surface which has the property of retro-reflection over its
entire surface.It shall be weather resistant and show colour fastness.It shall be new and
unused and shall show no evidance of cracking,scaling,pitting,blisting,edge lifting and
shall have negligible shrinkage or expansion including cleaning / scraping and painting of
existing board etc. complete. (Guidance on the recommanded application of each class of
tape may be taken from IRC-67)
215 Road Furniture 6.12 a MORTH 803.4 Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface MORTH 803.4 One Square 666 27
of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing Meterr
glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass
beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux
measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd
of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer
of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC
35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and
holes complete as per direction of Engineer-in-charge and in accordance with applicable
specifications.(Refer MORTH Clause 803 for technical Specification and Performance
for IRC 35:2015).
216 Road Furniture 6.12 b MORTH 803.4 Providing and applying Cold plastic paint two component rolled on surfacing material MORTH 803.4 One Square 1516 58
solvent free,high build two pack seamless,tough,skid resistant,material with has property Meterr
of attaining 2.00mm thickness in single coat application white(or as required colour
)based on glass and colour retaining acralic cross linking resin system for coloured road
surfacing including surface cleaning and cost of all material etc. complete. (All inclusive
on bitumen or concrete surface) work shall carried out as per IRC 35-2015 clause 2.2)
Page 48
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
217 Road Furniture 6.13 MORTH 806 Providing and fixing Aluminum-backed flexible prismatic (AFP) sheeting consisting MORTH 806 One Square 8403 375
Yellow colored flexible prismatic sheeting with non-metallic prismatic lens as Meterr
Retroreflective elements and conforming to ASTM D 4956-09 Type VI specification for
rebound able Retroreflective sheeting. This flexible prismatic sheeting shall be of 1ft
width and laminated at the back with a 50 micron Aluminum (Al) foil with pressure
sensitive adhesive and liner. Further, this flexible prismatic sheeting shall have screen
printed arrow/slant line pattern in black color in a continuous roll format. Neither AFP
sheeting nor the flexible prismatic sheeting used in it shall crack when slowly bent in 1
second time around a 1/8th inch mandrel after being conditioned for 24hrs at 0?C and
tested as per section S2.2.2. of ASTM D 4956-09. The AFP sheeting, with the liner
removed, shall be applied with a neoprene contact adhesive with a Polychloroprene as
base, viscosity of 200-450 cps and solid content of 20-30%. Once applied, the edges of the
product shall be sealed all around with a two-part epoxy based structural adhesive and
shall be extremely resistant to peel-off. A test report from institutes like ARAI/CRRI
confirming to above mentioned flexibility and ASTM-D4956-09 Type-VI retro reflectivity
performance of the flexible prismatic sheeting used in AFP shall be submitted by the
tenderer during prequalification and supply of material.
218 Road Furniture 6.14 MORTH 806 Providing Vertical Delineator having wide angle cube corner micro prismatic non metallic MORTH 806 One Number 2990 474
reflective sheeting confirming to Type XI of ASTM D4956 -09 with White Color and
Red Color combination and having minimum of retro reflective exposed area of 125 Sq
CM on top slots and 35 Sq CM on bottom slots and no edges shall be exposed for
tampering. This tubular delineator shall have a core and shell construction, shell shall be
made of tough, high impact resistant, injection-molded, thermoplastic outer body and the
inner core shall consist of powder coated or painted Mild steel of minimum thickness
1.0mm.and core-shell structure shall be of height not less than 800 mm above the ground
and width not less than 80 mm. The metallic core of the delineator shall extend 300mm
beyond the shell length from bottom for installing in the ground. The extended portion
shall have slots to insert anchoring rods for enhancing the concrete grip. The logo of the
manufacturer shall be embossed on either side of the body in the injection molding
process. The engineering thermoplastic used for making the delineator body shall have
minimum initial mechanical properties of 600J/m tested in accordance with ASTM D256
and shall retain at least 70% of these minimum initial values when subjected to
accelerated weathering for 1000hrs as per ASTM G155 or UL 746C and as per IRC 79
specifications and including fixing the unit in M20 Grade Cement Concrete of Size
30x30x40 cm including excavation for pit.
Page 49
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
219 Road Furniture 6.15 MORTH 806 Road Delineators: Supplying and installation of delineators (Roadway Indicators, Hazard MORTH 806 One Number 822 21
markers, Object markers) 80 to 100 cm high above ground level, painted black and white
in 15 cm wide strips, fitted with 80x100mm rectangular or 75mm dia. Circular
reflectorised panels at the top, buried or pressed into the ground and confirming to I.R.C.
79 and the drawings
220 Road Furniture 6.16 MORTH 806 Providing and fixing steel pipe delineators of 10 cm. in diameter and total height of 130 MORTH 806 One Number 1006 21
cm, provided with 2 strips of white retroreflective sheeting of size 5 cm. x 32.5 cm. each
fixed horizontally and 2 strips of red retroreflective sheeting each having size 5 cm. x 32.5
cm. fixed horizontally at top, with M.S. round cap having diameter 11 cm. and wire mesh
at top (10 guage thick) and height of wire mesh 15 cm, M.S. hold fast 6 mm thick with 35
cm. in length, fixing the delineators in C.C. 1:4:8 concrete block of size 25 cm. x 25 cm. x
45 cm. with necessary excavation etc. complete.
225 Road Furniture 6.22 MORTH 801 Supplying rolled steel channel post of 100 x 50 mm (ISMC) drilled on top and painted MORTH 801 One Running 1443 225
with one coat of epoxy primer and two coats of epoxy finish paint having black and white Metre
bands of 25 cm last part of the post 0.75 m below ground level is painted with three coats
of red lead paint with 2 nos. of high tensile G.I. bolt and nut of size 10 mm Dia. of 25 mm
long including transportation etc. complete. Spec. No. : As per IRC-67, and M.O.R.T.
and H. Circular No. RW/NH-33023/31/88 D.O.III Dated 2-5-1994
Page 50
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
226 Road Furniture 6.23 MORTH 801 Supplying M.S. Angle iron post of size 65 mm x 65 mm x 6 mm drilled on top and MORTH 801 One Running 1347 274
painted with one coat of epoxy primer and two coats of epoxy finish paint having black Metre
and white bands of 25 cm, last part of the post 0.75 m below ground level is painted with
three coats of red lead paint with 2 nos. of high tensile G.I. bolt and nut of size 10 mm dia.
of 25 mm long including transportation etc. complete. Spec. No. : As per IRC-67, and
M.O.R.T. and H. Circular No. RW/NH-33023/31/88 D.O.III Dated 2-5-1994
Road Furniture 6.24 MORTH 801 Supplying M.S. Angle iron post of size ____________ duly painted with one coat of red
oxide paint and two coats of synthetic enamel finish paint having black and white bands
of 25 cm width including 2 nos of G.I. bolt and nut of size 10 mm dia. And 20 mm long
including transportation etc. complete. Spec. No. : As per IRC-67, and M.O.R.T. and H.
Circular No. RW/NH-33023/31/88 D.O.III Dated 2-5-1994
227 Road Furniture a Post of size 65 mm x 65 mm x 6 mm MORTH 801 One Running 853 175
Metre
228 Road Furniture b MORTH 801 Post of size 50 mm x 50 mm x 5 mm MORTH 801 One Running 572 175
Metre
229 Road Furniture 6.25 MORTH 801 Supplying M.S. Angle iron frame for informatory sign boards of size 35 mm x 35 mm x 3 MORTH 801 One Running 411 175
mm welded and making neccesary holes required for fixing and painted with one coat of Metre
epoxy primer and two coats epoxy finish paint etc. complete.Spec. No. : As per IRC-67,
and M.O.R.T. and H. Circular No. RW/NH-33023/31/88 D.O.III Dated 2-5-1994
Road Furniture 6.26 MORTH 805 Providing and constructing Information Pillar of Brick Masonry in C.M. 1:6 of size 2.0 m
x 0.23m x 1.0 m with base pedestal of size 2.3 m x 0.35 m x 0.45 m (0.3 m above
ground), excavtion in ground upto 0.4 m, laying 0.15 m thick 80 mm soling,0.10 m thick
c.c. 1:3:6, finishing the pedestal and pillar in cement plaster 12 mm thick in C.M. 1:5 and
finishing the pillar with neat cement finish ,applying flat oil paint of approved colour in
two coats, including curing, finishing etc complete.(In Strata/Soil __________) Spec. No.
:As directed by Engineer-in-charge.
230 Road Furniture a MORTH 805 In Strata other than B.C. Soil MORTH 805 One Number 13833 4264
231 Road Furniture b MORTH 805 In B.C. Soil with 12 mm thick R.C.C. raft in M-15, including reinforcement e. MORTH 805 One Number 16487 4736
Page 51
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Road Furniture 6.27 MORTH 801 Providing and fixing Mandatory/Regulatory sign boards in circular shape of ______ mm
dia made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall
have 7 years written warranty from the manufacturer and authorised distributor/convertor
issued for field performance including the screen printed areas and cut-out sheeting and
cut-out durable transparent overlay film and this warranty certificate in original should be
submitted to the Engineer in charge by the contractor/supplier.
232 Road Furniture a MORTH 801 600 mm dia made out of 1.5mm aluminum sheet MORTH 801 One Number 4516 706
233 Road Furniture b MORTH 801 600 mm dia made out of 3mm aluminum composite material MORTH 801 One Number 4548 706
234 Road Furniture c MORTH 801 750 mm dia made out of 2mm aluminum sheet MORTH 801 One Number 5735 706
235 Road Furniture d MORTH 801 750 mm dia made out of 4mm aluminum composite material MORTH 801 One Number 5788 706
236 Road Furniture e MORTH 801 900 mm dia made out of 2mm aluminum sheet MORTH 801 One Number 7094 706
237 Road Furniture f MORTH 801 900 mm dia made out of 4mm aluminum composite material MORTH 801 One Number 7172 706
238 Road Furniture g MORTH 801 1200 mm dia made out of 2mm aluminum sheet MORTH 801 One Number 10590 706
239 Road Furniture h MORTH 801 1200 mm dia made out of 4mm aluminum composite material MORTH 801 One Number 10727 706
Page 52
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Road Furniture 6.28 MORTH 801 Providing and fixing Mandatory/Regulatory sign boards in circular shape of ___mm dia
made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat
activated adhesive retoreflective specified back ground, border and back side retoreflctive
symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back
support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel
paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white
bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete
block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C (
Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the
manufacturer and authorised distributor/convertor issued for field performance including
the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film
and this warranty certificate in original should be submitted to the Engineer in charge by
the contractor/supplier.
240 Road Furniture a MORTH 801 600 mm dia made out of 1.5mm aluminum sheet MORTH 801 One Number 5364 706
241 Road Furniture b MORTH 801 600 mm dia made out of 3mm aluminum composite material MORTH 801 One Number 5396 706
242 Road Furniture c MORTH 801 750 mm dia made out of 2mm aluminum sheet MORTH 801 One Number 7107 706
243 Road Furniture d MORTH 801 750 mm dia made out of 4mm aluminum composite material MORTH 801 One Number 7161 706
244 Road Furniture e MORTH 801 900 mm dia made out of 2mm aluminum sheet MORTH 801 One Number 9165 706
245 Road Furniture f MORTH 801 900 mm dia made out of 4mm aluminum composite material MORTH 801 One Number 9242 706
246 Road Furniture g MORTH 801 1200 mm dia made out of 2mm aluminum sheet MORTH 801 One Number 14563 706
247 Road Furniture h MORTH 801 1200 mm dia made out of 4mm aluminum composite material MORTH 801 One Number 14700 706
Page 53
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Road Furniture 6.29 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of
____mm made out of ___mm aluminum sheet bonded with white retro reflective sheeting
of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall
have 7 years written warranty from the manufacturer and authorised distributor/convertor
issued for field performance including the screen printed areas and cut-out sheeting and
cut-out durable transparent overlay film and this warranty certificate in original should be
submitted to the Engineer in charge by the contractor/supplier.
248 Road Furniture a MORTH 801 600 mm made out of 1.5mm aluminum sheet MORTH 801 One Number 3829 706
249 Road Furniture b MORTH 801 600 mm made out of 3mm aluminum composite material MORTH 801 One Number 3847 706
250 Road Furniture c MORTH 801 750 mm made out of 2mm aluminum sheet MORTH 801 One Number 4299 706
251 Road Furniture d MORTH 801 750 mm made out of 4mm aluminum composite material MORTH 801 One Number 4325 706
252 Road Furniture e MORTH 801 900 mm out of 2mm aluminum sheet MORTH 801 One Number 5212 706
253 Road Furniture f MORTH 801 900 mm made out of 4mm aluminum composite material MORTH 801 One Number 5254 706
254 Road Furniture g MORTH 801 1200 mm made out of 2mm aluminum sheet MORTH 801 One Number 7072 706
255 Road Furniture h MORTH 801 1200 mm made out of 4mm aluminum composite material MORTH 801 One Number 7148 706
Page 54
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Road Furniture 6.30 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of
_____ mm made out of ____mm aluminum sheet bonded with white retro reflective
sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. ClassC ( Type XI Micro prismatic grade sheeting) shall have 10 years written
warranty from the manufacturer and authorised distributor/convertor issued for field
performance including the screen printed areas and cut-out sheeting and cut-out durable
transparent overlay film and this warranty certificate in original should be submitted to
the Engineer in charge by the contractor/supplier.
256 Road Furniture a MORTH 801 600 mm made out of 1.5mm aluminum sheet MORTH 801 One Number 4291 706
257 Road Furniture b MORTH 801 600 mm made out of 3mm aluminum composite material MORTH 801 One Number 4309 706
258 Road Furniture c MORTH 801 750 mm made out of 2mm aluminum sheet MORTH 801 One Number 4933 706
259 Road Furniture d MORTH 801 750 mm made out of 4mm aluminum composite material MORTH 801 One Number 4958 706
260 Road Furniture e MORTH 801 900 mm made out of 2mm aluminum sheet MORTH 801 One Number 6289 706
261 Road Furniture f MORTH 801 900 mm made out of 4mm aluminum composite material MORTH 801 One Number 6331 706
262 Road Furniture g MORTH 801 1200 mm made out of 2mm aluminum sheet MORTH 801 One Number 9085 706
263 Road Furniture h MORTH 801 1200 mm made out of 4mm aluminum composite material MORTH 801 One Number 9160 706
Page 55
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Road Furniture 6.31 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Octagone size of _____mm
made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall
have 7 years written warranty from the manufacturer and authorised distributor/convertor
issued for field performance including the screen printed areas and cut-out sheeting and
cut-out durable transparent overlay film and this warranty certificate in original should be
submitted to the Engineer in charge by the contractor/supplier.
264 Road Furniture a MORTH 801 750 mm made out of 2mm aluminum sheet MORTH 801 One Number 6540 706
265 Road Furniture b MORTH 801 750 mm made out of 4mm aluminum composite material MORTH 801 One Number 6608 706
266 Road Furniture c MORTH 801 900 mm out of 2mm aluminum sheet MORTH 801 One Number 8252 706
267 Road Furniture d MORTH 801 900 mm made out of 4mm aluminum composite material MORTH 801 One Number 8350 706
Road Furniture 6.32 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Octagone size of ______ mm
made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat
activated adhesive retoreflective specified back ground, border and back side retoreflctive
symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back
support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel
paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white
bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete
block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C (
Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the
manufacturer and authorised distributor/convertor issued for field performance including
the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film
and this warranty certificate in original should be submitted to the Engineer in charge by
the contractor/supplier.
268 Road Furniture a MORTH 801 750 mm made out of 2mm aluminum sheet MORTH 801 One Number 8337 706
Page 56
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
269 Road Furniture b MORTH 801 750 mm made out of 4mm aluminum composite material MORTH 801 One Number 8405 706
270 Road Furniture c MORTH 801 900 mm made out of 2mm aluminum sheet MORTH 801 One Number 10951 706
271 Road Furniture d MORTH 801 900 mm made out of 4mm aluminum composite material MORTH 801 One Number 11049 706
Road Furniture 6.33 Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in
shape having area less than 0.9 One Square Meterr made out of ____mm aluminum sheet
bonded with white retro reflective sheeting of Class __ ( Type IV High intensity micro-
prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive
retoreflective specified back ground, border and back side retoreflctive symbols, letters,
numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame
25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel
paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt
long firmly fixed to the ground by means of properly designed foundation with M25 grade
cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved
drawing The angle iron post shall be duly painted with one coat of epoxy primer and two
coats of epoxy finish paints having alternate black and white bands of 25 cm width
including GI fixures and transportation etc.complete.The nut bolts of board with angle
iron post/supporting structure after fixing at site has to be electrically welded. Class B (
Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years
written warranty from the manufacturer and authorised distributor/convertor issued for
field performance including the screen printed areas and cut-out sheeting and cut-out
durable transparent overlay film and this warranty certificate in original should be
submitted to the Engineer in charge by the contractor/supplier.
272 Road Furniture a MORTH 801 2mm aluminum sheet Class B MORTH 801 One Square 9667 675
Meter
273 Road Furniture b MORTH 801 4mm aluminum composite material Class B MORTH 801 One Square 9788 675
Meter
274 Road Furniture c MORTH 801 2mm aluminum sheet of Class C MORTH 801 One Square 13109 675
Meter
275 Road Furniture d MORTH 801 4mm aluminum composite material Class C MORTH 801 One Square 13230 675
Meter
Page 57
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Road Furniture 6.34 Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in
shape having area greater than 0.9 One Square Meterr made out of ___mm aluminum
sheet bonded with white retro reflective sheeting of Class __ ( Type IV High intensity
micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive
retoreflective specified back ground, border and back side retoreflctive symbols, letters,
numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame
25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel
paint and supported on two no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt
long firmly fixed to the ground by means of properly designed foundation with M25 grade
cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved
drawing The angle iron post shall be duly painted with one coat of epoxy primer and two
coats of epoxy finish paints having alternate black and white bands of 25 cm width
including GI fixures and transportation etc.complete.The nut bolts of board with angle
iron post/supporting structure after fixing at site has to be electrically welded. Class B (
Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years
written warranty from the manufacturer and authorised distributor/convertor issued for
field performance including the screen printed areas and cut-out sheeting and cut-out
durable transparent overlay film and this warranty certificate in original should be
submitted to the Engineer in charge by the contractor/supplier.
276 Road Furniture a MORTH 801 2mm aluminum sheet Class B MORTH 801 One Square 12364 679
Meter
277 Road Furniture b MORTH 801 4mm aluminum composite material of Class B MORTH 801 One Square 12485 679
Meter
278 Road Furniture c MORTH 801 2mm aluminum sheet bonded of Class C MORTH 801 One Square 15805 679
Meter
279 Road Furniture d MORTH 801 4mm aluminum composite material of Class C MORTH 801 One Square 15926 679
Meter
Page 58
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Road Furniture 6.35 MORTH 801 Providing and erecting Overhead signs made out of ___mm aluminum sheet bonded with
white retro reflective sheeting of Class__ ( Type IV High intensity micro-prismatic grade
sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified
back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per
IRC:67-2012, with designed back support frame of mild steel angle with vertical and
lateral clearance given in clause 801 and 802, duly painted on back side with two coats of
grey stove enamel paint and installed as per clause 802.6 over a designed support system
of structural steel work trestles and trusses of sections and type as per structural design
requirements and approved plans including painting with one coat of epoxy primer and
two coats of epoxy finish paint.The nut bolts of board with angle iron post/supporting
structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity
micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from
the manufacturer and authorised distributor/convertor issued for field performance
including the screen printed areas and cut-out sheeting and cut-out durable transparent
overlay film and this warranty certificate in original should be submitted to the Engineer
in charge by the contractor/supplier.This item does not include the cost of structural steel
work required for support system.
280 Road Furniture a MORTH 801 2mm aluminum sheet of Class B MORTH 801 One Square 6761 173
Meter
281 Road Furniture b MORTH 801 4mm aluminum composite material of Class B MORTH 801 One Square 6882 173
Meter
282 Road Furniture c MORTH 801 2mm aluminum sheet of Class C MORTH 801 One Square 10202 173
Meter
283 Road Furniture d MORTH 801 4mm aluminum composite material Class C MORTH 801 One Square 10323 173
Meter
Page 59
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
284 Road Furniture 6.36 MORTH 801 Providing and fixing board displaying information, such as 'Name of work, Tender cost, MORTH 801 One Number 9963 3021
Name of Contractor, Work completion and liability period etc', having rectangular shape
of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with
one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and
grey stove enamel on back side and border / messages / symbols etc. with approved colour
shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross
braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle
iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and
white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8
concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling,
transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge
285 Road Furniture 6.37 MORTH 805 Providing and fixing R.C.C. precast cement concrete M-15 pedestal OF SIZE 0.75 X 0.75 As directed by One Number 2008 265
X 0.20 m including cost of steel reinforcement for Km. stone as per detailed drawing and Engineer-in-charge.
specification including transportation of pedestal Block, all lifts etc. complete.
286 Road Furniture 6.38 IRC-67 2012 Providing and fixing cautionary / warning sign board of size 60 cm. having shape of IRC-67 2012 One Number 4702 953
equilateral triangle with apex point upwards. prepared on 16 gauge M.S. sheet including
painting with one coat of zinc cromate stoving primer and two coats each of white back
ground, red border and backside gray stove enamelled, bonded with cut out of Retro
reflective sheet Engineering grade, symbol / letters / numerals / border / arrow, coated
with non pealable crystal clear protective transparent coat retaining 100% reflection
including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m.
long inflated at bottom drilled on top in one piece without joint painted with white and
black bands of 30 cm. fixing board and post with 2 Nos. high strength G.I. bolts and nuts
of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with
cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size etc.complete. 60 cm.
equilateral triangle M.S. sheet with Engineering grade,
Page 60
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
287 Road Furniture 6.39 IRC-67 2012 Providing and fixing Mandatory / Regulatory sign board of circular shape of size 60 cm. IRC-67 2012 One Number 5805 953
dia. prepared on 16 gauge M.S. sheet including painting with zinc chromate stoving
primer and two coats each of white back ground,red border and backside gray stove
enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol /
letters / numerals / border, coated with non pealable crystal clear protective transparent
coat retaining 100% relection including one One Number of M.S. Angle iron post of size
50 x 50 x 5 mm of 3.45 m. long inflated at bottom drilled on top in one piece without joint
painted with white and black bands of 30 cm. fixing board and post with 2 Nos. high
strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes,
conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm
size etc. complete. circular shape of size 60 cm. dia. M.S. sheet with Retro reflective sheet
Engineering grade
288 Road Furniture 6.40 IRC-67 2012 Providing and fixing sign boards of size 90cm having shape of an equilateral triangle IRC-67 2012 One Number 5106 1625
made out of 14 gauge sheet with retro reflective sheeting of Engineering Grade as per
M.O.T. specification No. 801-3(1993) white reflective back ground, lettering symbol
bordering of black non reflective paint including M. S. angle iron back frame of size 35
mm X 35 mm X 5 mm & M.S.angle one post of 50mm x 50mm x 5mm size 3.45 metre
long duly painted with white and black bands including fixing M.S. angle of the boards
with galvanised nuts and bolts and washers. The Board shall be as per IRC-67-1977
including conveying fixing in ground with C.C. 1:4:8 block of size 0.60 x 0.60 x 0.75 m,
with 7 year guarantee for the sheeting etc. complete. Mild Steel Board with Engineering
Grade
289 Road Furniture 6.41 IRC-67 2012 Providing and fixing road junction/information sign boards of size 1.80 x 0.90 Meter IRC-67 2012 One Number 17458 2310
Prepared 16 guageM.S.sheet on frame of M.S.angle of size 35 x 35 x 5 mm with cross
bracing of size 35x35x5 mm including painting with one coat of zinc cromate stoving
primer and two coats each of green/white back ground and back side gray stove
enamelled, bonded with red retro reflective sheet Engineering grade, border / letters /
numeral /arrows, coated with non pealable crystal clear protective transperent coat
retaining 100% reflection including two angle iron post of size 65 x 65 x 6 mm of 3.65 m.
long inflated at bottom ,drilled on top and painted in white and black bands of 30 cm. with
4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long. Sheet and
angle iron post in one piece without joints including all taxes, conveying, fixing in ground
with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-
in- charge etc. complete. Mild Steel Board with Engineering Grade.
Page 61
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
290 Road Furniture 6.42 IRC-67 2012 Providing and fixing road junction/ information sign boards of size 1.80 x 0.90 Meter IRC-67 2012 One Number 20480 2310
Prepared 16 guage Alluminium sheet on frame of size 35 x 35 x 5 mm with cross bracing
of size 35x35x5 mm including bonded with IRC Specified colour of retro reflective
sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having
pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective cutout
border & messages having pressure sensitive adhesive having border & messages in IRC
Specified colour background including two angle iron post of size 65 x 65 x 6 mm of 3.65
m. long inflated at bottom drilled on top and painted in whiteand black bands of 30 cm.
with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and
angle iron post in one piece without joints including all taxes, conveying, fixing in ground
with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-
in- charge etc. complete. Alluminium sheet Type IV High Intensity Micro-Prismatic
Grade Sheeting.
291 Road Furniture 6.43 IRC-67 2012 Providing and fixing informatory sign boards in rectangular shape of size 1.80m x 0.90m IRC-67 2012 One Number 19712 2144
made out of 3mm aluminum composite panel bonded with IRC Specified colour of retro
reflective sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP)
having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective
cutout border & messages having pressure sensitive adhesive having border & messages
in IRC Specified colour background including M. S. angle iron frame of size 35 mm X 35
mm X 5 mm & two M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m long,
duly painted with flat oil paint having alternate black and white bands of 25 cm width
including G.I. fixtures etc; fixing the boards in M-20 concrete block of size 60cm X 60cm
X 75cm including transportation etc; complete. Aluminum composite panel with Type IV
High Intensity Micro-Prismatic Grade Sheeting.
Page 62
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
292 Road Furniture 6.44 IRC-67 2012 Providing and fixing road junction/ information sign boards of size 1.80 x 1.20 Meter IRC-67 2012 One Number 19448 2512
Prepared 16 guage M.S.sheet on frame of size 40x40x5 mm with cross bracing of size
35x35 x 5 mm including painting with one coat of zinc cromate stoving primer and two
coats each of green/white back ground and back side gray stove enamelled, bonded with
red retro reflective sheet Engineering grade, border / letters / numeral /arrows, coated with
non pealable crystal clear protective transperent coat retaining 100% reflection
includingtwo angle iron post of size 65 x 65 x 6 mm of 3.65 m. long inflated at bottom
drilled on top and painted in whiteand black bands of 30 cm. with 4 Nos. high strength
G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one
piece without joints including all taxes, conveying, fixing in ground with cement concrete
1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in- charge etc.
complete. Mild Steel Board with Engineering Grade.
293 Road Furniture 6.45 IRC-67 2012 Providing and fixing road junction/ information sign boards of size 1.80 x 1.20 Meter IRC-67 2012 One Number 23816 2382
Prepared 16 guage Alluminium sheet on frame of with angle iron frame of
size40x40x5mm with cross bracing of size 35x35x5 mm including Type IV High Intensity
Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive / heat activated adhesive,
IRC Specified colour retro reflective cutout border & messages having pressure sensitive
adhesive having border & messages in IRC Specified colour back ground including two
angle iron post of size 65 x 65 x 6 mm of 3.65 m. long inflated at bottom drilled on top
and painted in whiteand black bands of 30 cm. with 4 Nos. high strength G.I. bolts and
nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without
joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of
60 cm x 60 cm x 75 cm size as directed by Engineer-in- charge etc. complete. Alluminium
sheet Type IV High Intensity Micro-Prismatic Grade Sheeting.
Page 63
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
294 Road Furniture 6.46 IRC-67 2012 Providing and fixing informatory sign boards in square or rectangular shape of size 1.80m IRC-67 2012 One Number 23960 2499
x1.20m made out of 3mm Aluminum composite panel bonded with IRC Specified colour
of retro reflective sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting
(HIP) having pressure sensitive / heat activated adhesive, IRC Specified colour retro
reflective cutout border & messages having pressure sensitive adhesive having border &
messages in IRC Specified colour background including M. S. angle iron frame of size 35
mm X 35 mm X 5 mm & two M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65
m long, duly painted with flat oil paint having alternate black and white bands of 25 cm
width including G.I. fixtures etc; fixing the boards in M-20 concrete block of size
60cm X 60cm X 75cm including transportation etc; complete. Aluminum composite
panel with Type IV High Intensity Micro-Prismatic Grade Sheeting.
295 Road Furniture 6.47 IRC-67 2012 Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. IRC-67 2012 One Number 7814 1482
prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including
painting with one coat of zinc cromate stoving primer and two coats each of green/ white
back ground and back side gray stove enamelled, bonded with red retro reflective sheet
Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal
clear protective coat retaining 100% reflection including two angle iron post of size
50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and
black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and
20 mm long sheet and angle iron post in one piece without joints including all taxes,
conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm
size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering
Grade.
296 Road Furniture 6.48 IRC-67 2022 Providing and fixing informatory sign boards of size 0.90 x 0.60 m made out of 14 guage IRC-67 2022 One Number 11535 1280
Aluminum sheet bonded with IRC Specified colour of retro reflective sheeting of Type
IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive / heat
activated adhesive, IRC Specified colour retro reflective cutout border & messages having
pressure sensitive adhesive having border & messages in IRC Specified colour
background including on frame of with angle iron frame of size 35 x 35 x 5 mm and two
M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m long, duly painted with
flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures
etc; fixing the boards in 1:4:8 concrete block of size 60cm X 60cm X 75cm including
transportation etc; complete. Alluminium sheet Type IV High Intensity Micro-Prismatic
Grade Sheeting
Page 64
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
297 Road Furniture 6.49 IRC-67 2012 Providing and fixing informatory sign boards shape of size 0.90 x 0.60 m made out of IRC-67 2012 One Number 11497 1182
3mm Aluminum composite panel bonded with IRC Specified colour of retro reflective
sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having
pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective cutout
border & messages having pressure sensitive adhesive having border & messages in IRC
Specified colour background including M. S. angle iron frame of size 35 mm X 35 mm X
5 mm & M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m long, duly
painted with flat oil paint having alternate black and white bands of 25 cm width
including G.I. fixtures etc; fixing the boards in M-20 concrete block of size 60cm X 60cm
X 75cm including transportation etc; complete. Aluminum composite panel with Type IV
High Intensity Micro-Prismatic Grade Sheeting. Spec.No. As per IRC-67, 2015
298 Road Furniture 6.50 IRC-67 2012 Providing and fixing sign boards of size size 60 x 80 cm made out of 14 gauge M.S.Sheet IRC-67 2012 One Number 7461 1147
with retro reflective sheeting of Engineering Grade as per M.O.T. specification No. 801-
3(1993) white reflective back ground, lettering symbol bordering of black non reflective
paint including 3.65 metre long M.S.angle one post of 65 x 65 x 6 mm size duly painted
with white and black bands including fixing the boards of M.S. angle with galvanised nuts
and bolts and washer. The Board shall be as per IRC-67-1977 including conveying fixing
in ground with C.C. 1:4:8 block of size 0.60 x 0.60 x 0.75 m, with 7 year guarantee for the
sheeting etc. complete. Mild Steel Board with Engineering Grade.
299 Road Furniture 6.51 IRC-67 2012 Providing and fixing informatory sign boards of size 60 cm x 80 cm made out of 14 IRC-67 2012 One Number 8971 1072
guage Aluminum sheet bonded with IRC Specified colour of retro reflective sheeting of
Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive /
heat activated adhesive, IRC Specified colour retro reflective cutout border & messages
having pressure sensitive adhesive having border & messages in IRC Specified colour
background including M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m
long, duly painted with flat oil paint having alternate black and white bands of 25 cm
width including G.I. fixtures etc; fixing the boards in 1:4:8 concrete block of size 60cm X
60cm X 75cm including transportation etc; complete. Alluminium sheet Type IV High
Intensity Micro-Prismatic Grade Sheeting
Page 65
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
300 Road Furniture 6.52 IRC-67 2012 Providing and fixing informatory sign boards of size 60 cm x 80 cm made out of 3mm IRC-67 2012 One Number 8625 931
Aluminum composite panel bonded with IRC Specified colour of retro reflective sheeting
of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure
sensitive / heat activated adhesive, IRC Specified colour retro reflective cutout border &
messages having pressure sensitive adhesive having border & messages in IRC Specified
colour background including M. S. angle iron frame of size 35 mm X 35 mm X 5 mm &
M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m long, duly painted with
flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures
etc; fixing the boards in M-20 concrete block of size 60cm X 60cm X 75cm including
transportation etc; complete. Aluminum composite panel with Type IV High Intensity
Micro-Prismatic Grade Sheeting.
301 Road Furniture 6.53 IRC-67 2012 Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction IRC-67 2012 One Number 4110 875
plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one
coat of zinc cromate stoving primer and two coats each of white and green back ground
and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet
Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal
clear protective transparent coat retaining 100% reflection including one One Number of
M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on
top in one piece without joint painted with white and black bands of 30 cm. fixing board
and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm
long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of
60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel
Route Marker with Engineering Grade
302 Road Furniture 6.54 IRC-67 2012 Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction IRC-67 2012 One Number 4739 875
plate of size 30 cm x 25 cm prepared on 16 guage Alluminium sheet including Type IV
High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive / heat
activated adhesive, IRC Specified colour retro reflective cutout border & messages having
pressure sensitive adhesive having border & messages in IRC Specified colour
background, including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm
of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with
white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I.
bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in
ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by
Engineer-in-charge etc. complete. Alluminium sheet Type IV High Intensity Micro-
Prismatic Grade Sheeting
Page 66
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
303 Road Furniture 6.55 IRC-67 2012 Providing and fixing Road junction / Information sign board of size 1.20 m x 0.90 m. IRC-67 2012 One Number 14129 1917
prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 5 mm with cross
bracing of size 35 x 35 x 5 mm including painting with one coat of zinc cromate stoving
primer and two coats each of green/white back ground and back side gray stove
enamelled, bonded with red retro reflective sheet Engineering grade, border / letters /
numeral /arrows, coated with non pealable crystal clear protective transperent coat
retaining 100% reflection includingtwo angle iron post of size 65 x 65x 6 mm of 3.65 m.
long inflated at bottom drilled on top and painted in whiteand black bands of 30 cm. with
4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and
angle iron post in one piece without joints including all taxes, conveying, fixing in ground
with M-20 cement concrete of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-
charge etc. complete. Mild Steel sheet with Engineering grade.
304 Road Furniture 6.56 IRC-67 2012 Providing and fixing informatory sign boards in rectangular shape of size 1.20m x 0.90m IRC-67 2012 One Number 15169 1917
made out of 16 guage Aluminum panel bonded with IRC Specified colour of retro
reflective sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP)
having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective
cutout border & messages having pressure sensitive adhesive having border & messages
in IRC Specified colour background including M. S. angle iron frame of size 35 mm X 35
mm X 3 mm & two M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m long,
duly painted with flat oil paint having alternate black and white bands of 25 cm width
including G.I. fixtures etc; fixing the boards in M-20 concrete block of size 60cm X 60cm
X 75cm including transportation etc; complete. Aluminum Panel Type IV High Intensity.
305 Road Furniture 6.57 IRC-67 2012 Providing and fixing informatory sign boards in rectangular shape of size 1.20m x 0.90m IRC-67 2012 One Number 16160 1917
made out of 3mm Aluminum composite panel bonded with IRC Specified colour of retro
reflective sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP)
having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective
cutout border & messages having pressure sensitive adhesive having border & messages
in IRC Specified colour background including M. S. angle iron frame of size 35 mm X 35
mm X 3 mm & two M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m long,
duly painted with flat oil paint having alternate black and white bands of 25 cm width
including G.I. fixtures etc; fixing the boards in M-20 concrete block of size 60cm X 60cm
X 75cm including transportation etc; complete. Aluminum composite panel Type IV
High Intensity.
Page 67
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
306 Road Furniture 6.58 IRC-67 2012 Providing and fixing informatory sign boards in square or rectangular shape of any size IRC-67 2012 One Square 11059 1233
for overhead gantries or alike made out of 3mm aluminum composite panel bonded with Meter
IRC Specified colour of retro reflective sheeting of Type XI Diamond Grade Sheeting
(DG3) With ECF( Electronic Cutable Film) Lettring having pressure sensitive / heat
activated adhesive, IRC Specified colour retro reflective cutout border & messages having
pressure sensitive adhesive having border & messages in IRC Specified colour
background including M. S. angle iron frame and bracing of size 35 mm X 35 mm X 5
mm and duly painted with flat oil paint including G.I. fixtures etc. and fixing the boards.
(The work to be executed with prior approval of Superintending Engineer.)
Page 68
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Page 69
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
313 Road 7.07 As directed by Providing and fixing in position Guard Railing as per Drg. No. 15 Type C dt. 20-4-79, RD One Running 3214 171
Miscellaneous Engineer Incharge with 3 rows of 50mm dia. G.I. pipe 30cm a part and fixed in M.S. channels of section 125 Metre
items x 65 x 6 mm spaced 2.5 C/c 1:2:4 c.c. bedding of size 45 x 30cm. as per detailed drawing,
with 3 coats of approved yellow and black paint including necessary excavation in any
strata.
314 Road 7.08 As directed by Providing and fixing in position Guard Railing as per Drg. No. 15 Type C dt. 20-4-79, RD One Running 2156 128
Miscellaneous Engineer Incharge with 3 rows of 40mm dia. G.I. pipe 30cm a part and fixed in M.S. channels of section 100 Metre
items x 50 x 6 mm spaced 2.5 C/c 1:2:4 c.c. bedding of size 45 x 30 x 30cm. as per detailed
drawing, with 3 coats of approved of yellow and black paint including necessary
excavation in any strata.
315 Road 7.09 As directed by Providing and fixing Guard Railing of 1000mm height as per Type D Drg. No. 15 dt. 20-4- RD One Running 2797 182
Miscellaneous Engineer Incharge 79, and fixed in 40 x 40 x 6mm iron, angle embedded in 1:2:4 cement concrete bedding Metre
items patti as per detailed drawing, with 3 coats of approved of yellow and black paint.
316 Road 7.10 As directed by Providing and fixing Guard Railing of 1000 mm height in 25mm M.S. square bars 100 RD One Running 3241 249
Miscellaneous Engineer Incharge mm C/c. as per Type drawing No. 6 dt. 20-8- 85 and fixed in 50mm x 50mm x 6mm iron Metre
items angle embedded in 1:2:4 C.C. bedding 55 x 45 cm and 50 x 6 iron patti as per detailed
drawing with 3 coats of approved yellow and black paint.
317 Road 7.11 MORTH Design of overlay for existing B.T. surface with carrying out testing by Benkelman Beam IRC-81 One Kilometre 6378 447
Miscellaneous method as per guide lines in IRC 81:1997 including design and testing at site. The charges
items for transportation of Benkelman Beam, loaded truck, labour for testing and traffic control
are not included.
318 Road 7.12 MORTH Carrying out roughness index / road unevenness test with car mounted / jeep towed As Directed by One Kilometre 578 0
Miscellaneous ARUR machine (Automatic road unevenness Recorder) Calibrated from C.R.R.I. New Engineer In Charge
items Delhi (Central Road Research Institute) or any other equivalent authority including taking
observations, feeding data and giving computerized test result including hire charges of all
machinery and labour completed. i) Road surface single lane (B.TW,B.M.) 3.75 m Width.
319 Road 7.13 MORTH Carrying out roughness index / road unevenness test with car mounted / jeep towed As Directed by One Kilometre 1148 0
Miscellaneous ARUR machine (Automatic road unevenness Recorder) Calibrated from C.R.R.I. New Engineer In Charge
items Delhi (Central Road Research Institute) or any other equivalent authority including taking
observations, feeding data and giving computerized test result including hire charges of all
machinery and labour completed. i) Road surface single lane (B.TW,B.M.) 5.5 m to 7.00
m. Width.
Page 70
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
320 Road 7.14 MORTH Carrying out roughness index / road unevenness test with car mounted / jeep towed As Directed by One Kilometre 574 43
Miscellaneous ARUR machine (Automatic road unevenness Recorder) Calibrated from C.R.R.I. New Engineer In Charge
items Delhi (Central Road Research Institute) or any other equivalent authority including taking
observations, feeding data and giving computerized test result including hire charges of all
machinery and labour completed. i) Road surface single lane (B.TW,B.M.) Each
additional lane Width.
321 Road 7.15 MORTH Dead Journey charges for Transportation of machine/ vehical for Carrying out roughness As Directed by One Kilometre 14 1
Miscellaneous index / road unevenness test with car mounted / jeep towed ARUR machine (Automatic Engineer In Charge
items road unevenness Recorder) Calibrated from C.R.R.I. New Delhi (Central Road Research
Institute) or any other equivalent authority including taking observations, feeding data and
giving computerized test result including hire charges of all machinery and labour
completed. Spec. No. : As directed by Engineer in charge.
322 Road 7.16 MORTH 702 Providing and laying a woven Polypropylene Geotextile of Type-I manufactured from MORTH 702 One Square 180 81
Miscellaneous black UV stabilised Polypropylene Tape yarn on the prepared subgrade as the separator Metre
items cum reinforcement with necessary overlap as per drawing.( For use this item SE/CE
permission is obligatory.)
323 Road 7.17 MORTH 702 Providing and laying a woven Polypropylene Geotextile of Type-II manufactured from MORTH 702 One Square 180 81
Miscellaneous black UV stabilised Polypropylene Tape yarn on the prepared subgrade as the separator Metre
items cum reinforcement with necessary overlap as per drawing.( For use this item SE/CE
permission is obligatory.)
324 Road 7.18 MORTH 702 Providing and laying a woven Polypropylene Geotextile of Type-III manufactured from MORTH 702 One Square 180 81
Miscellaneous black UV stabilised Polypropylene Tape yarn on the prepared subgrade as the separator Metre
items cum reinforcement with necessary overlap as per drawing. ( For use this item SE/CE
permission is obligatory.)
325 Road 7.19 MORTH 702 Providing and laying a fibre glass geogrid of Tensile strength 50 kN/m manufactured from MORTH 702 One Square 171 80
Miscellaneous high quality glass fibre strands and coated with a polymer modified bitumen as Metre
items reinforcement to Asphalt overlay flexible pavements and Asphalt over distressed rigid
P.C.C.
326 Road 7.20 MORTH 702 Providing and laying a fibre glass geogrid of Tensile strength 100 kN/m manufactured MORTH 702 One Square 257 103
Miscellaneous from high quality glass fibre strands and coated with a polymer modified bitumen as Metre
items reinforcement to Asphalt overlay flexible pavements and Asphalt over distressed rigid
P.C.C.
Page 71
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
327 Road 7.21 As directed by Providing and Constructing gabion structure 1 Meter high or required section made up of MORTH 2503 One Cubic Metre 4309 614
Miscellaneous Engineer Incharge soft mechanically woven hexagonal shaped G.I. wire confirming to IS 16014:2012 having
items zinc plus PVC coating of overall diameter of 3.7 mm and tying lacing wire of 3.2 mm
with edge wire confirming to overall diameter 4.4 mm edges being mechanically selvedge
including placing in position, fitting neatly with trap stone rubble (15 to 23 cm) all loose
ends to be securely tied (Excluding transportation) etc. complete. ( In Dry condition and
for under water installation extra cost to be considered)
328 Road 7.22 As directed by Providing and Constructing gabion structure 0.50 Meter high or required section made up MORTH 2503 One Cubic Metre 4292 726
Miscellaneous Engineer Incharge of soft mechanically woven hexagonal shaped G.I. wire confirming to IS 16014:2012
items having zinc plus PVC coating of overall diameter of 3.7 mm and tying lacing wire of 3.2
mm with edge wire confirming to overall diameter 4.4 mm edges being mechanically
selvedge including placing in position, fitting neatly with trap stone rubble (15 to 23 cm)
all loose ends to be securely tied (Excluding transportation) etc. complete.( In Dry
condition and for under water installation extra cost to be considered)
329 Road 7.23 MORTH 702 Providing and laying Needle Punched and mechanically bonded non woven Geotextile of MORTH 702 One Square 176 78
Miscellaneous Type III indigenously manufactured from high quality Propylene staple fibers (continuous Metre
items filament will not be accepted) on the prepared subgrade for Seperation.( For use this item
SE/CE permission is obligatory.)
330 Road 7.24 MORTH 703 Providing and laying Needle Punched and mechanically bonded non woven Geotextile of MORTH 702 One Square 176 78
Miscellaneous Type II indigenously manufactured from high quality Propylene staple fibers (continuous Metre
items filament will not be accepted) on the prepared subgrade for Seperation.( For use this item
SE/CE permission is obligatory.)
331 Road 7.25 MORTH 202 Removal of telephone / Electric poles including excavation and dismantling of foundation MORTH 202 One Number 371 347
Miscellaneous concrete and lines under the supervision of concerned department, disposal with all lifts
items and up to a lead of 1000 metres and stacking the serviceable and unserviceable material
separately
332 Road 7.29 MORTH 409 Footpaths and Separators -- Construction of footpath/separator by providing a 150 mm MORTH 409 One Square 910 89
Miscellaneous compacted granular sub base as per clause 401 and 25 mm thick cement concrete grade Metre
items M15, over laid with pre-cast concrete tiles in cement mortar 1:3 including provision of all
drainage arrangements but excluding kerb channel.
Page 72
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
333 Road 7.30 MORTH 810 Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing and MORTH 810 One Running 4912 263
Miscellaneous erecting a W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal Metre
items beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150
x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all
steel parts and fitments to be galvanised by hot dip process, all fittings to conform to
IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of
channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810)""
334 Road 7.31 MORTH 810 Metal Beam Crash Barrier -- Type - B, THRIE : Metal Beam Crash Barrier (Providing and MORTH 810 One Running 6520 263
Miscellaneous erecting a Thrie metal beam crash barrier comprising of 3 mm thick corrugated sheet Metre
items metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical
post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m below ground
level, all steel parts and fitments to be galvanised by hot dip process, all fittings to
conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a
space of channel section 150 x 75 x 5 mm, 546 mm long complete as per clause 810)""
335 Road 7.32 MORTH 811 Flexible Crash Barrier, Wire Rope Safety Barrier (Providing and erecting a wire rope MORTH 811 One Running 3092 158
Miscellaneous safety barrier with vertical posts of medium weight RS Joist (ISMB series) 100 mm x 75 Metre
items mm (11.50 kg/m), 1.50 m long 0.85 m above ground and 0.65 m below ground level, split
at the bottom for better grip, embedded in M 15 grade cement concrete 450 x 450 x 450
mm, 1.50 m center to center and with 4 horizontal steel wire rope 40 mm dia and anchored
at terminal posts 15 m apart. Terminal post to be embedded in M 15 grade cement
concrete foundation 2400 x 450 x 900 mm (depth), strengthened by a strut of RS joist 100
x 75 mm, 2 m long at 450 inclination and a tie 100 x 8 mm, 1.50 m long at the bottom, all
embedded in foundation concrete as per approved design and drawing, rate excluding
excavation and cement concrete.)
336 Road 7.33 MORTH 811 Anti - Glare Screen with 25 mm steel pipe framework fixed with circular and rectangular MORTH 811 One Running 2255 78
Miscellaneous vans (Providing and erecting an anti - glare screen with 25 mm dia vertical pipes Metre
items fabricated and framed in the form of panels of one metre length and 1.75 mtr height fixed
with circular vane 250 mm dia at top and rectangular vane 600 x 300 mm at the middle,
made out of steel sheet of 3 mm thickness, end vertical pipes of the panel made larger for
embedding in foundation concrete, applying 2 coats of paint on all exposed surfaces, all as
per approved design and drawings.)
Page 73
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
337 Road 7.34 MORTH 811 Anti - Glare Screen with Rectangular Vane of MS sheet (Providing and erecting anti - MORTH 811 One Running 1437 105
Miscellaneous glare screen with rectangular vanes of size 750 x 500 mm made from MS sheet, 3 mm Metre
items thick and fixed on MS angle 50 x 50 x 6 mm at an angle of 450 to the direction of flow of
traffic, 1.5 m center to center, top edge of the screen 1.75 m above ground level, vertical
post firmly embedded in cement concrete foundation 0.60 m below ground level, applying
2 coats of paint on exposed faces, all complete as per approved design and drawings)
338 Road 7.35 MORTH 809 Providing Reinforced cement concrete crash barrier at the edges of the road, approaches to MORTH 809 One Running 4058 119
Miscellaneous bridge structures and medians, constructed with R.C.C. M 20 Grade concrete with HYSD Metre
items reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at
expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on
which it is built and installed as per design given in the enclosure to MOST circular No.
RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved
drawing and at locations directed by the Engineer, all as specified etc. complete. Spec:
MORT and H 2013 Cl 811 Page No 360
339 Road 7.36 MORTH 809 Providing Reinforced cement concrete crash barrier at the edges of the road, approaches to MORTH 809 One Running 4213 119
Miscellaneous bridge structures and medians, constructed with R.C.C. M 25 Grade concrete with HYSD Metre
items reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at
expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on
which it is built and installed as per design given in the enclosure to MOST circular No.
RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved
drawing and at locations directed by the Engineer, all as specified etc. complete. Spec:
MORT and H 2013 Cl 811 Page No 360
340 Road 7.37 MORTH 809 Providing Reinforced cement concrete crash barrier at the edges of the road, approaches to MORTH 809 One Running 4234 119
Miscellaneous bridge structures and medians, constructed with R.C.C. M 30 Grade concrete with HYSD Metre
items reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at
expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on
which it is built and installed as per design given in the enclosure to MOST circular No.
RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved
drawing and at locations directed by the Engineer, all as specified etc. complete. Spec:
MORT and H 2013 Cl 811 Page No 360
Page 74
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
347 Road 8.07 RD Patch repair on already filled pot holes with 20 mm premix carpet and seal coat as per As Directed by One Square 230 7
Maintenance MORTH specification clause 3004.1 and 3004.2 Engineer In Charge Metre
348 Road 8.08 MORTH 3004.2 Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface MORTH 3004.2 One Square 342 119
Maintenance by providing tack coat, 20 mm thick pre-mix carpet and seal coat as per MORTH Metre
specification clause 3004.1 and 3004.2
349 Road 8.09 RD Maintenance of gravel road including making up the loss of profile, rectifying corrugated As Directed by One Square 104 17
Maintenance surface, filling up of depressions, pot holes and erosion gullies by adding fresh material Engineer In Charge Metre
and compacting it with appropriate equipment or to strip excess of material from the
road surface as per drawings etc complete
Page 75
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
350 Road 8.10 RD Providing pick and roll surface by picking the old WBM surface to the required standard, As Directed by One Square 115 14
Maintenance adding 30% of 40mm size metal and required quantity of murum including laying Engineer In Charge Metre
sectioning, watering, compacting with static roller with thin layer of murum blindage on
carrageway, watering and compacting by static roller, including cost of all materials,
loading, unloading, stacking and labour etc. complete. Spec.No. : As directed by Engineer-
in-charge.
351 Road 8.11 RD Maintenance of WBM road including filling up of pot holes, ruts and rectifying As Directed by One Square 250 58
Maintenance corrugated surface, damaged edges and ravelling etc. complete Engineer In Charge Metre
352 Road 8.12 RD The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, As Directed by One Running 18 18
Maintenance regrading, deepening of side drains as well as catch water drains etc. complete Engineer In Charge Metre
353 Road 8.13 RD Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs As Directed by One Number 2423 1161
Maintenance to cracks, parapet wall and protection work as per drawing etc. complete Engineer In Charge
354 Road 8.14 RD Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / As Directed by One Kilometre 4798 3127
Maintenance cautionary / informatory and place identifications sign board as per drawings etc. complete Engineer In Charge
355 Road 8.15 RD Maintenance of Kilometer stones, and 200 metre by way of refiting of tilted stones As Directed by One Kilometre 1086 755
Maintenance repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and Engineer In Charge
5th km stone etc. complete
356 Road 8.16 RD Cutting of branches of trees and shrubs from the road way or with in R.O.W including As Directed by One Number 258 186
Maintenance disposal of wood and leaves to suitable location etc. complete Engineer In Charge
357 Road 8.17 RD Trimming of grass, shurbs and weeds from the shoulders/berms and disposing off the As Directed by One Square 8 8
Maintenance same to suitable locations etc. complete Engineer In Charge Metre
358 Road 8.18 RD Maintenance of guard stones/ boundry stones/ indicator stones by way of refiting of tilted As Directed by One Kilometre 1081 474
Maintenance stones repairing with cement mortar, cleaning, repairing and white washing etc. complete Engineer In Charge
359 Road 8.19 RD Repair of steel railing to bring it to original shape cleaning and repainting as per drawing As Directed by One Running 435 239
Maintenance etc. complete Engineer In Charge Metre
360 Road 8.20 RD Repair of RCC railing to bring it to the original shape, cleaning and repainting as per As Directed by One Running 835 345
Maintenance drawings etc. complete Engineer In Charge Metre
361 Road 8.21 RD Removal of steel railing and refixing of railing to submersible bridges including cleaning As Directed by One Running 506 395
Maintenance and repainting etc complete Engineer In Charge Metre
Page 76
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
362 Road 8.22 RD White washing two coats on parapet walls and white washing and geru lime painting to As Directed by One Square 26 15
Maintenance tree trunks including preparation of surface by cleaning scraping etc. complete Engineer In Charge Metre
363 Road 8.23 RD Dressing of side shoulder / Scrapping the road side shoulder by Mechanical means ( By As Directed by One Square 10 0
Maintenance JCB /DOUZER) including excavation of raised side shoulders upto 15cm depth including Engineer In Charge Metre
remooving /cutting bushes,grass and dressing shoulder to desired camber and disposing of
excavated stuff up to road boundary etc complete. as directed by Engineer In Charge.
364 Road 8.24 MORTH Providing and Laying Pressure Sensitive Technology ( PST ) based Insstapattch ready mix As Directed by One Square 938 48
Maintenance compound for repair potholes, manufactured from aggregates of 4-12 mm, treated with Engineer In Charge Metre
special grade bitumen, Pressure Sensitive Polymer( PSP) and Cross Linking Chemical
(CLC) agents etc, technically evaluated for repairs on bitumenous/concrete surfaces,
confirming to CRRI and IRC accreduted norms for pressure sensitive polymer products
for repairs of Potholes on road/ Pavements, havinfg upto 25mm thick insstapattch layer on
base of compacted aggregates ( Crusher Brocken ) of 50mm thickness including labours,
material, tools and tampering etc complete.
365 Road 8.25 MORTH 514 Providing, laying and rolling Micro seal surfacing ( 10 mm thick ) for preventive As Directed by One Square 136 6
Maintenance maintainance including supplying all materials , preparing the existing road surface , Engineer In Charge Metre
heating bitumen , aggregates , lime in hot mix plant , laying the mix seal surfacing by
paver finisher and compaction by power roller etc complete.( Using 60/70 bulk bitumen
for mixing and tack coat over black topped surface by using 0.14 Cum per 10 Sqm. of
crusher aggregate passing 100 % through 6.30 mm sieve and retained100 % on 0.075 mm
size sieve 0.2 Kg / Sqm lime and 11.00 kg / 10 Sqm bulk bitumen for fixing and 0.50 kg /
Sqm for tack coat ) Spec: As directed by Engineer In Charge and IRC SP 78 - 2008
366 Road 8.26 MORTH 514 Providing, laying and rolling Micro seal surfacing ( 10 mm thick ) for preventive As Directed by One Square 127 4
Maintenance maintainance including supplying all materials , preparing the existing road surface , Engineer In Charge Metre
heating bitumen , aggregates , lime in hot mix plant , laying the mix seal surfacing by
paver finisher and compaction by power roller etc complete.( Using 60/70 bulk bitumen
for mixing and tack coat over black topped surface by using 0.14 Cum per 10 Sqm. of
crusher aggregate passing 100 % through 9.50 mm sieve and retained100 % on 0.075 mm
size sieve 0.2 Kg / Sqm lime and 9.50 kg / 10 Sqm bulk bitumen for fixing and 0.50 kg /
Sqm for tack coat ) Spec: As directed by Engineer In Charge and IRC SP 78 -2008
367 Road 8.27 MORTH 408 Providing and laying shoulder drain of trap rubble of 0.45 x 0.45 meter section at 45 As Directed by One Running 353 48
Maintenance degree angle to the road edge including hand packing, filling voids with sand/shingle of Engineer In Charge Metre
approved quality and ramming etc. complete as desired.
Page 77
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
368 Road 8.28 As Directed by Providing and laying Pressure Sensitive Technology ( PST ) based ready mix compound One Square 881 101
Maintenance Engineer In Charge for repairing potholes, manufactured from aggregates of 4-12mm, treated compound Metre
having mix of bituminous antistriping compound, stabilizer, Pressure Sensitive Polymer
and water repellent compound like oil soluble polyacid etc. having good consistency for
laying, technically evaluated for repairs on bituminous/concrete surface confirming to
CRRI and IRC accrediated norms for pressure sensitive polymer products for repairs fo
potholes on road/ pavement having upto 25mm thick ready thickness including labours,
material, tools and tampering etc. complete. (Undertaking shall be taken from the supplier
before starting the work)
369 Road 8.29 As Directed by Supply of self watering system Multi Stage Tree guard / Protctor 110 mm dia & total One Number 1290 97
Maintenance Engineer In Charge height of 1800 mm made up with HDPE. In tubular section, first stage will be 600mm
long & second and forth stage 65% perforated casting in HDPE tubular section of 300mm
long each tubular section & third and fifth stage of plain 300mm long each tubular section
in 110mm dia. all sections fix with stagewise with leakproof fixing arrangement 2 no
tubular rubber section of 75mm dia, 1.5mm thick & length 350 mm (fix on both 65%
perforated tubular section at top for increase the water holding capacity as per plant
height). The specially designed rubber water holding device of size 90mm dia outerside &
12mm dia innerside of 1.5mm thick as per design fix on 40mm dia. 100mm long pvc pipe
seperately.(for inserting the plants). 2 nos 40mm dia. treated bamboo of 2.00 mtr. height
(buried 150 mm below the bottom of excavated pit & stand with tubular section) 2 nos
rubber/pvc ties ( fix at bottom & top of plain tubular section with bamboo) 2 nos 5mm
dia. fromate (fixing at bottom o tubular section for deep root irrigation system) 2 nos
600mm long HDPE lateral pipe of 5mm dia. with deep roor irrigation system (insert in the
gromate & pit, away form 200 mm from plant roots). 1200 mm long barbed wire of 14
guage (The treeguard is rapping with 1200 mm long barbed wire over third plain tubular
section for protection against cattles & other external factors) as per technical
specification & manual. ( Cost of Plant & fixing charges will be extra as per approved
rates). (Note :- Plant Height should be required above 2.50 m & Dia of stem 25 mm at
bottom)
Page 78
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
370 Road 8.30 As Directed by Supply of self watering system tree guard in 110 mm dia, 1.80 mt height made up of One Number 1127 97
Maintenance Engineer In Charge cotton canvas cloth of polymer pipe of 15 litres water storage capacity stand with 2 nos.
40 mm dia treated bamboo of 2 mt ht. tie with tag at two nos and specially designed
dexpandable rubber seal 110 mm dia outer & 25 mm dia. inner dia installed on bottom of
pipe, and 0.60 m long HDPE lateral pipe 2 nos 5mm dia to carry the water near root zone
connected with gromate fix in treeguard and rapping 1.20m long barbed wire to middle of
treeguard for protection agianst cattles and other external factors as per specification. (
cost of plant & fixing charges will be extra as per approved rates). (Note :- Plant height
should be required above 2.50 m & Dia of stem 25 mm at bottom )
371 Road 8.31 As Directed by Fixing and Transporting of self watering system tree guard-insertion of sapling in self One Number 125 125
Maintenance Engineer In Charge watering tree guard and capping the bottom with expandable rubber seal. Supporting the
bamboo with the help of cable tie. Bamboo to be buried 0.15 mt ht. below of excavated
pit. Strengthening the bamboo in pit with adequate measures. Circulating the barbed wire
around tree guard at middle ht. from bottom and fixing it. Thr rates excluding the cost of
barbed wire, bamboo, expandable seal, tree guard and all other required material. Fixing
to be carried out as per manual instruction.
372 Road 8.32 Rd.43.3.1 Providing 50 mm thick Full grout bituminous treatment including supplying all materials As Directed by One Square 715 121
Maintenance , prepairing the exisisting road surface,applying tack coat @ 0.735 kg / sqm and laying the Engineer In Charge Meter
required thickness of metal layer, heating and spraying bitumen of specified Grade at the
rate of 5.00 kg / sqm , spreading chips and laying seal coat of specified Grade of bitumen
of 1.70 Kg/sqm and compacting , making the surface good etc. complete ( For only Patch
Repair works / For Road work )
(VG-30 bulk bitumen rates are considered to arrive at rates)
373 Road 8.33 Rd.45.3.1 Providing 50 mm thick semi grout bituminous treatment including supplying all materials As Directed by One Square 552 121
Maintenance , prepairing the exisisting road surface,applying tack coat @ 0.735 kg / sqm and laying the Engineer In Charge Meter
required thickness of metal layer, heating and spraying bitumen of specified Grade at the
rate of 2.75 kg / sqm , spreading chips and laying seal coat of specified Grade of bitumen
of 1.25 Kg/sqm and compacting , making the surface good etc. complete ( For only Patch
Repair works / For Road work )
(VG-30 bulk bitumen rates are considered to arrive at rates)
Page 79
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
374 Road 8.34 MORTH 505 Providing and constructing 75 mm. thick Modified Penetraction Macadam (MPM) road As Directed by One Square 331 5
Maintenance surface including all materials, preparing the existing road surface, spreading 40 mm. Engineer In Charge Meter
stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking
Rubble obtained by blasting) , heating and spraying the bitumen of VG-30 grade @ 2 kg /
sqm , spreading 12mm.size chips compacting with three wheel static roller having weight
8 to 10 MT. to achive the desired degree of compaction as per Technical Specification
Clause 506 etc.complete, including applying tack coat of VG 10 grade bitumen at the rate
of 0.30 Kg Sqm. on existing bitumen surface. ( For Repair works only)
375 Road 8.35 MORTH 505 Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road As Directed by One Square 265 4
Maintenance surface including all materials, preparing the existing road surface, spreading 40mm. stone Engineer In Charge Meter
layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble
obtained by blasting) , heating and spraying the bitumen of VG-30 @ 1.75 kg / sqm,
spreading 12mm.size chips compacting with Static roller having weight 8 to 10 MT. to
achive the desired degree of compaction as per Technical Specification Clause 506
etc.complete, including applying tack coat at the rate of 0.30 Kg Sqm.( for repair works
only)
Page 80
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
380 Cross Drainage 11.03 Providing & laying in situ cement concrete of M 10 proportion with trap/ granite/ One Cubic Meter 5728 1538
Works quartzite/ gneiss metal in foundation including necessary form work compacting and
curing etc. complete. with reversible Drum Type mixer with SCADA. With crushed sand .
381 Cross Drainage 11.04 CD 3B Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ CD.3 Page.No. 160 One Cubic Meter 5695 1538
Works quartzite/ gneiss metal in foundation including necessary form work, compacting and
curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates
of required specifications (Natural sand / VSI sand finely washed etc )
382 Cross Drainage 11.06 CD 4 Providing rubble stone paving 15cm thick in 1:3 cement mortar over a bedding of 15cm CD.4 Page.No. 160 One Square 2334 982
Works thick cement concrete of 1:4:8 proportion with trap /granite /quartzite /gneiss metal Meterr
including striking joints and watering etc. complete.
383 Cross Drainage 11.07 CD 6 Providing uncoursed rubble trap /quartzite /gneiss stone masonary in cement mortar 1:5 CD.6 Page.No. 162 One Cubic Meter 5597 2168
Works for piers, abutments, wings, returns, head-walls, parapet etc. including bailing out of
water, striking joints of the non exposed faces, pointing the exposed faces with cement
mortar 1:3, scaffolding, watering to masonary and etc. complete.
384 Cross Drainage 11.08 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter CD.7 Page.No. 162 One Running 1949 432
Works in proper line, level and slope including providing and fixing collars in cement mortar 1:2 Metre
and curing etc. complete.
385 Cross Drainage 11.09 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter CD.7 Page.No. 162 One Running 2733 432
Works in proper line, level and slope including providing and fixing collars in cement mortar 1:2 Metre
and curing etc. complete.
386 Cross Drainage 11.10 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 800mm diameter CD.7 Page.No. 162 One Running 4099 432
Works in proper line, level and slope including providing and fixing collars in cement mortar 1:2 Metre
and curing etc. complete.
387 Cross Drainage 11.11 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 900mm diameter CD.7 Page.No. 162 One Running 4844 432
Works in proper line, level and slope including providing and fixing collars in cement mortar 1:2 Metre
and curing etc. complete.
Page 81
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
388 Cross Drainage 11.12 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 1000mm CD.7 Page.No. 162 One Running 5465 432
Works diameter in proper line, level and slope including providing and fixing collars in cement Metre
mortar 1:2 and curing etc. complete.
389 Cross Drainage 11.13 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 1200mm CD.7 Page.No. 162 One Running 7670 432
Works diameter in proper line, level and slope including providing and fixing collars in cement Metre
mortar 1:2 and curing etc. complete.
390 Cross Drainage 11.14 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 600mm diameter CD.7 Page.No. 162 One Running 4792 727
Works in proper line, level and slope etc. complete. Metre
391 Cross Drainage 11.15 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 800mm diameter CD.7 Page.No. 162 One Running 7456 727
Works in proper line, level and slope etc. complete. Metre
392 Cross Drainage 11.16 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 900mm diameter CD.7 Page.No. 162 One Running 8272 727
Works in proper line, level and slope etc. complete. Metre
393 Cross Drainage 11.17 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 1000mm CD.7 Page.No. 162 One Running 9114 727
Works diameter in proper line, level and slope etc. complete. Metre
394 Cross Drainage 11.18 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 1200mm CD.7 Page.No. 162 One Running 11790 727
Works diameter in proper line, level and slope etc. complete. Metre
395 Cross Drainage 11.19 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-4 class of 900mm diameter CD 7 Page 167 One Running 9085 727
Works in proper line, level and slope etc. complete. Metre
396 Cross Drainage 11.20 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-4 class of 1000mm CD 7 Page 167 One Running 11082 727
Works diameter in proper line, level and slope etc. complete. Metre
397 Cross Drainage 11.21 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-4 class of 1200mm CD 7 Page 167 One Running 12983 727
Works diameter in proper line, level and slope etc. complete. Metre
398 Cross Drainage 11.22 CD 8 Providing cast in situ / ready mix block of M10 cement concrete with circular or other CD.8 Page.No. 163 One Cubic Meter 8321 3169
Works shaped opening for waterway including necessary formwork, compaction, finishing and
curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan
mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI
sand finely washed etc ), cement 4.05 bags/cumt)
399 Cross Drainage 11.24 CD 27 Providing selected hard murum filling including laying in layers of 15 to 20cmwith CD.14 Page.No. 167 One Cubic Meter 660 225
Works watering and compacting etc. complete.
400 Cross Drainage 11.25 CD Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite CD.15 Page.No. 168 One Cubic Meter 7225 1530
Works /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing and B.7. Page No. 38
etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch
mix plant (pan mixer) with SCADA with fine agreegates of required specifications
(Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt)
401 Cross Drainage 11.27 CD 27 Providing and fixing stream lined M-20 grade RCC guard stone including mild steel bar CD.20 Page.No. 169 One Number 963 194
Works reinforcement etc. complete.
Page 82
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
402 Cross Drainage 11.28 CD Providing cast in situ / ready mix M10 grade cement concrete for head walls of CD work / CD 8 Page 163 One Cubic Meter 8717 3169
Works retaining walls etc. including necessary form work, compaction, finishing and curing etc.
complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with
SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely
washed etc ), cement 4.05 bags/cumt)
403 Cross Drainage 11.29 CD Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / CD 8 Page 163 One Cubic Meter 9747 3169
Works retaining walls etc. including necessary form work, compaction, finishing and curing etc.
complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with
SCADA
404 Cross Drainage 11.30 CD Providing and casting in situ / ready mix PCC M15 grade of trap metal for coping to head Bd-E-7 One Cubic Meter 9106 3169
Works walls / parapet including centering, form work, compaction and curing etc. complete.
(with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA
with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )
405 Cross Drainage 11.31 CD Providing and casting in situ / ready mix PCC M20 grade of trap metal for coping to head Bd-E-8 One Cubic Meter 9258 3169
Works walls / parapet including centering, form work, compaction and curing etc. complete.
(with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA
with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )
Page 83
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
409 Bridge 12.06 BR 3C Excavation for foundation in hard murum and boulders including shoring and strutting, BR.3 Page One One Cubic Metre 286 155
Foundation and dewatering as necessary and disposing off excavated stuff as directed etc. complete. Number 102
Sub Structure a) Upto 1.50m lift Normal Rate
b) 1.50m to 3.00m lift, Add 10%
c) 3.00m to 4.50m lift, Add 20%
d) 4.50m to 6.0m lift, Add 30%
410 Bridge 12.08 BR 3D Excavation for foundation in soft rock including shoring and strutting, dewatering as BR.3 Page One One Cubic Metre 557 232
Foundation and necessary and disposing off excavated stuff as directed etc. complete. Number 102
Sub Structure a) Upto 1.50m lift Normal Rate
b) 1.50m to 3.00m lift, Add 10%
c) 3.00m to 4.50m lift, Add 20%
d) 4.50m to 6.0m lift, Add 30%
Page 84
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
411 Bridge 12.09 BR 3E Excavation for foundation in hard rock by blasting including shoring and strutting, BR.3 Page One One Cubic Metre 1232 378
Foundation and dewatering as necessary and disposing off excavated stuff as directed etc. complete. Number 102
Sub Structure a) Upto 1.50m lift Normal Rate
b) 1.50m to 3.00m lift, Add 10%
c) 3.00m to 4.50m lift, Add 20%
d) 4.50m to 6.0m lift, Add 30%
412 Bridge 12.10 BR 3E Excavation for foundation in hard rock by controlled blasting including shoring and BR.3 Page One One Cubic Metre 1328 416
Foundation and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. Number 102
Sub Structure complete.
a) Upto 1.50m lift Normal Rate
b) 1.50m to 3.00m lift, Add 10%
c) 3.00m to 4.50m lift, Add 20%
d) 4.50m to 6.0m lift, Add 30%
413 Bridge 12.11 BR 3F Excavation for foundation in hard rock by chiselling and wedging or line drilling BR-3 Page One One Cubic Metre 1932 1932
Foundation and including shoring and strutting, dewatering as necessary and disposing off excavated stuff Number 102
Sub Structure as directed etc. complete.
a) Upto 1.50m lift Normal Rate
b) 1.50m to 3.00m lift, Add 10%
c) 3.00m to 4.50m lift, Add 20%
d) 4.50m to 6.0m lift, Add 30%
414 Bridge 12.12 BR 3G Excavation for foundation in laterite rock including shoring and strutting, dewatering as BR.3 Page One One Cubic Metre 1771 1771
Foundation and necessary and disposing off excavated stuff as directed etc. complete. Number 102
Sub Structure a) Upto 1.50m lift Normal Rate
b) 1.50m to 3.00m lift, Add 10%
c) 3.00m to 4.50m lift, Add 20%
d) 4.50m to 6.0m lift, Add 30%
415 Bridge 12.13 BR 3G Providing and fixing 25mm diameter steel anchor dowel in hard rock including drilling As directed by One Number 1674 455
Foundation and hole of 32 mm diameter up to 0.75 mtrs depth, placing the dowel in position and Engineer in charge.
Sub Structure effectively grouting the hole with CM 1:1 proportion etc. complete.
416 Bridge 12.22 BR 4 B Dewatering on BHP basis by using water pump including diversion of stream, providing BR 4 Page No One Hour 179 136
Foundation and cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the 104.105
Sub Structure the works and pumping out water during and after excavation as may be required by using
3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be
necessary)
Page 85
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
417 Bridge 12.23 BR 4 B Dewatering on BHP basis by using water pump including diversion of stream, providing BR 4 Page No One Hour 201 136
Foundation and cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the 104.105
Sub Structure the works and pumping out water during and after excavation as may be required by using
5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be
necessary)
418 Bridge 12.24 BR 4 B Dewatering on BHP basis by using water pump including diversion of stream, providing BR 4 Page No One Hour 223 136
Foundation and cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the 104.105
Sub Structure the works and pumping out water during and after excavation as may be required by using
10.0 to 19.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be
necessary)
419 Bridge 12.25 BR 5A Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ BR.5 Page One One Cubic Metre 5593 866
Foundation and quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out Number 105 and
Sub Structure water, compacting and curing etc. complete. (with fully automatic micro processor based B.7, Page One
PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant Number 38
(pan mixer) with natural /artifical sand)
420 Bridge 12.27 BR 6 Providing uncoursed rubble stone masonry of trap/ granite/ quartzite/ gneiss metal in CM BR.6 Page One One Cubic Metre 5022 2402
Foundation and 1:5 for foundation of piers, abutments, wings etc. including bailing out of water, striking Number 105
Sub Structure joints, scaffolding and watering etc. complete.
421 Bridge 12.28 BR 8 Providing, fabricating, launching, floating and grounding in position steel curbs for wells BR.8 Page One One Metric 95341 20745
Foundation and with necessary steel bracings and steel cutting edges as shown in the detailed drawings Number 108 Tonne
Sub Structure and technical specifications etc. complete.
422 Bridge 12.29 BR 9A Providing and laying in situ / ready mix / ready mix CC M10 of trap/ granite/ quartzite/ BR.9 Page One One Cubic Metre 5360 1174
Foundation and gneiss metal in the hollow of the steel curbs including compacting by vibrating and curing Number 109 and
Sub Structure etc. complete. (with fully automatic micro processor based PLC with SCADA enabled B.7, Page One
with reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine Number38
agreegates of required specifications ( VSI sand finely washed etc )
423 Bridge 12.31 BR 10 Providing, fabricating and setting out MS cutting edge for RCC well curbs as per detailed BR.10 Page One One Metric 87664 11762
Foundation and drawings and technical specifications etc. complete. Number 110 Tonne
Sub Structure
424 Bridge 12.32 BR 13A Providing and laying in situ / ready mix / ready mix M20 RCC work with trap/ granite/ BR.13 Page One One Cubic Metre 6976 1280
Foundation and quartzite/ gneiss metal in well steining including shuttering, compacting by vibrating, Number 112 and B.
Sub Structure finishing and curing etc. complete. (fully automatic micro processor based PLC with 7, Page One
SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) Number38
with fine agreegates of required specifications ( VSI sand finely washed etc ), excluding
reinforcement)
Page 86
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
425 Bridge 12.34 BR 13A Providing and laying in situ / ready mix / ready mix M25 RCC work with trap/ granite/ BR.13 Page One One Cubic Metre 7057 1280
Foundation and quartzite/ gneiss metal in well steining including shuttering, compacting by vibrating, Number 112 and B.
Sub Structure finishing and curing etc. complete. (fully automatic micro processor based PLC with 7, Page One
SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) Number38
with fine agreegates of required specifications ( VSI sand finely washed etc ), excluding
reinforcement)
426 Bridge 12.36 BR Providing and laying in situ / ready mix / ready mix M20 RCC work with trap/ granite/ BR.13 Page One One Cubic Metre 6976 1280
Foundation and quartzite/ gneiss metal in well steining including shuttering, compacting by vibrating, Number 112 and B.
Sub Structure finishing and curing etc. complete. (fully automatic micro processor based PLC with 7, Page One
SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required Number38
specifications ( VSI sand finely washed etc ), excluding reinforcement)
427 Bridge 12.38 BR Providing and laying in situ / ready mix / ready mix M25 RCC work with trap/ granite/ BR.13 Page One One Cubic Metre 7012 1280
Foundation and quartzite/ gneiss metal in well steining including shuttering, compacting by vibrating, Number 112 and B.
Sub Structure finishing and curing etc. complete. (fully automatic micro processor based PLC with 7, Page One
SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required Number38
specifications ( VSI sand finely washed etc ), excluding reinforcement)
428 Bridge 12.40 BR 14 Sinking of wells upto 5.0 metres diameter for foundation through all strata (except rock) BR.14 Page One One Running 43279 9207
Foundation and to be removed by grabbing and chiselling soft disintegrated rock including blasting, large Number 113 Metre
Sub Structure scale dewatering, heavy chiselling, cutting by pneumatic tools, all materials available to
sink through such strata including removal of obstacle and use of necessary plant and
machinery, divers etc. and proper seating of the wells etc. complete. (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 87
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
429 Bridge 12.41 BR 14 Sinking of wells above 5.0 metres and upto 6.0 metres diameter for foundation through all BR.14 Page One One Running 54819 9886
Foundation and strata (except rock) to be removed by grabbing and chiselling soft disintegrated rock Number 113 Metre
Sub Structure including blasting, large scale dewatering, heavy chiselling, cutting by pneumatic tools, all
materials available to sink through such strata including removal of obstacle and use of
necessary plant and machinery, divers etc. and proper seating of the wells etc. complete.
(depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
430 Bridge 12.42 BR 14 Sinking of wells above 6.0 metres and upto 7.0 metres diameter for foundation through all BR.14 Page One One Running 59747 11863
Foundation and strata (except rock) to be removed by grabbing and chiselling soft disintegrated rock Number 113 Metre
Sub Structure including blasting, large scale dewatering, heavy chiselling, cutting by pneumatic tools, all
materials available to sink through such strata including removal of obstacle and use of
necessary plant and machinery, divers etc. and proper seating of the wells etc. complete.
(depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
431 Bridge 12.43 BR 14 Sinking of wells above 7.0 metres and upto 8.0 metres diameter for foundation through all BR.14 Page One One Running 84298 14460
Foundation and strata (except rock) to be removed by grabbing and chiselling soft disintegrated rock Number 113 Metre
Sub Structure including blasting, large scale dewatering, heavy chiselling, cutting by pneumatic tools, all
materials available to sink through such strata including removal of obstacle and use of
necessary plant and machinery, divers etc. and proper seating of the wells etc. complete.
(depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 88
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
432 Bridge 12.44 BR 14 Sinking of wells above 8.0 metres and upto 9.0 metres diameter for foundation through all BR.14 Page One One Running 94494 18415
Foundation and strata (except rock) to be removed by grabbing and chiselling soft disintegrated rock Number 113 Metre
Sub Structure including blasting, large scale dewatering, heavy chiselling, cutting by pneumatic tools, all
materials available to sink through such strata including removal of obstacle and use of
necessary plant and machinery, divers etc. and proper seating of the wells etc. complete.
(depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
433 Bridge 12.45 BR 14 Sinking of wells above 9.0 metres and upto 10.0 metres diameter for foundation through BR.14 Page One One Running 100965 19713
Foundation and all strata (except rock) to be removed by grabbing and chiselling soft disintegrated rock Number 113 Metre
Sub Structure including blasting, large scale dewatering, heavy chiselling, cutting by pneumatic tools, all
materials available to sink through such strata including removal of obstacle and use of
necessary plant and machinery, divers etc. and proper seating of the wells etc. complete.
(depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
434 Bridge 12.46 BR 14 Extra charges for sinking of various diameter of well foundation in hard rock encountered BR. 14A Page One One Running 2842 2842
Foundation and during sinking by chiselling in water etc. complete. Number 113 Metre
Sub Structure
435 Bridge 12.47 BR 16 Providing steel anchor dowel bars of 32 mm diameter and 4 m length at the base of the BR.16 Page One One Number 7859 1361
Foundation and well including drilling holes of 60 mm diameter up to 2.5 m depth in rock, placing the Number 120
Sub Structure dowels in position and effectively grouting the holes with CM 1:1 etc. complete.
436 Bridge 12.48 BR 16A Providing steel anchor dowel bars of 32 mm diameter and 4 m length through steining of BR. 16 Page One One Number 8270 1701
Foundation and the wells including provision of necessary ducts through staining, drilling holes of 60 mm Number 120
Sub Structure diameter up to 2.5 m depth in rock, placing the dowels in position and effectively grouting
the holes with CM 1:1 etc. complete.
437 Bridge 12.49 BR 17A Providing and laying in situ / ready mix / ready mix M15 CC of trap/ granite /quartzite BR.17 Page One One Cubic Metre 6975 1755
Foundation and /gneiss metal for the bottom plugs of wells in the dry condition including compaction and Number 120 and B.
Sub Structure curing wherever necessary etc. complete. (with fully automatic micro processor based 7, Page One
PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant Number38
(pan mixer) with fine agreegates of required specifications ( VSI sand finely washed etc )
Page 89
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
438 Bridge 12.51 BR 17B Providing and laying in situ / ready mix M15 CC of trap/ granite /quartzite /gneiss metal BR.17 Page One One Cubic Metre 7576 2247
Foundation and for the bottom plugs of wells under water including compaction and curing wherever Number 120 and B.
Sub Structure necessary etc. complete. (with fully automatic micro processor based PLC with SCADA 7, Page One
enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine Number38
agreegates of required specifications ( VSI sand finely washed etc )
439 Bridge 12.55 BR 59 a Providing and laying in situ / ready mix controlled grade of M15 of trap /granite /quartzite As directed by One Cubic Metre 7472 1376
Foundation and /gneiss metal for RCC works in cut off walls / curtain walls including necessary Engineer in charge.
Sub Structure scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with
fully automatic micro processor based PLC with SCADA enabled with reversible drum
type mixer/ concrete batch mix plant (pan mixer) VSI sand crushed, excluding
reinforcement)
440 Bridge 12.57 BR 59 a Providing and laying in situ / ready mix controlled grade of M20 of trap /granite /quartzite As directed by One Cubic Metre 7937 1376
Foundation and /gneiss metal for RCC works in cut off walls / curtain walls including necessary Engineer in charge.
Sub Structure scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with
fully automatic micro processor based PLC with SCADA enabled with reversible drum
type mixer/ concrete batch mix plant (pan mixer) with fine agreegates of required
specifications ( VSI sand finely washed etc ), excluding reinforcement)
441 Bridge 12.59 BR 59 a Providing and laying in situ / ready mix controlled grade of M25 of trap /granite /quartzite As directed by One Cubic Metre 8019 1376
Foundation and /gneiss metal for RCC works in cut off walls / curtain walls including necessary Engineer in charge.
Sub Structure scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with
fully automatic micro processor based PLC with SCADA enabled with reversible drum
type mixer/ concrete batch mix plant (pan mixer) with fine agreegates of required
specifications ( VSI sand finely washed etc ), excluding reinforcement)
442 Bridge 12.67.a BR Providing and Constructing Temporary Island 16 m diameter for Construction of Well BR.7. P.One One Number 72953 11490
Foundation and Foundation for 8m dia. Well. Number 107
Sub Structure Note:- For other well diameters rate can be worked out on the basis of cross-sectional area
of well. The diameter of the island shall be in the conformity with clause 1203.2 of
MoRTH
For depth of water 1.0 m and height of island to be 1.25 m.
443 Bridge 12.67.b BR Providing and Constructing Temporary Island 16 m diameter for Construction of Well BR.7. P.One One Number 342717 89891
Foundation and Foundation for 8m dia. Well. Number 107
Sub Structure Note:- For other well diameters rate can be worked out on the basis of cross-sectional area
of well. The diameter of the island shall be in the conformity with clause 1203.2 of
MoRTH
For depth of water 4.0 m and height of island 4.5 m.
Page 90
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
444 Bridge 12.68.a BR Providing and Constructing Temporary Island 12 m diameter for Construction of Well BR.7. P.One One Number 42308 6463
Foundation and Foundation for 6 m dia. Well. Number 107
Sub Structure Note:- For other well diameters rate can be worked out on the basis of cross-sectional area
of well. The diameter of the island shall be in the conformity with clause 1203.2 of
MoRTH
For depth of water 1.0 m and height of island to be 1.25 m.
445 Bridge 12.68.b BR Providing and Constructing Temporary Island 12 m diameter for Construction of Well BR.7. P.One One Number 212014 61182
Foundation and Foundation for 6 m dia. Well. Number 107
Sub Structure Note:- For other well diameters rate can be worked out on the basis of cross-sectional area
of well. The diameter of the island shall be in the conformity with clause 1203.2 of
MoRTH
For depth of water 4.0 m and height of island 4.5 m.
446 Bridge : Bored 12.70 MORTH Back filling behind abutment, wing wall and return wall as per drawings and technical MORT and H 2200 One Cubic Metre 784 111
Pile specifications etc. complete. (by granular material) &-710.1.4 of iRC 78
447 Bridge : Bored 12.71 MORTH Back filling behind abutment, wing wall and return wall as per drawings and technical MORT and H 2200 One Cubic Metre 1860 111
Pile specifications etc. complete. (by sandy material) &-710.1.4 of iRC 78
448 Bridge : Bored 12.72 MORTH Providing and laying of filter media with granular materials/ stone crushed aggregates MORT and H 2200 One Cubic Metre 1212 148
Pile satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a &-710.1.4 of iRC 78
thickness of not less than 600 mm with smaller size towards the soil and bigger size
towards the wall and provided over the entire surface behind abutment, wing wall and
return wall to the full height compacted to a firm condition as per drawing and technical
specifications etc. complete.
Page 91
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
452 Bridge Bearings 13.05 MORTH Supplying, fitting and fixing in position true to line and level forged steel rocker bearing MORT and H 2000 One Metric 315 4
including all accessories as per drawings and technical specifications conforming to and 2200 Tonne
IRC:83 (Pt-1) section IX and clause 2003 of MoRTH specifications etc. complete.
453 Bridge Bearings 13.06 MORTH Supplying, fitting and fixing in position true to line and level sliding plate bearing with MORT and H 2000 One Metric 303 17
PTFE surface sliding on stainless steel including all accessories as per drawings and and 2200 Tonne
technical specifications and BS:5400, section 9.1 and 9.2 and clause 2004 of MoRTH
specifications etc. complete.
454 Bridge Bearings 13.07 MORTH Supplying, fitting and fixing in position true to line and level elastomeric bearing MORT and H 2000 One Cubic 1 0
including all accessories as per drawing and technical specifications and IRC:83 (Pt-II) and 2200 Centimetre
section IX and clause 2005 of MoRTH specifications etc. complete.
455 Bridge Bearings 13.08 MORTH Supplying, fitting and fixing in position true to line and level sliding plate bearing with MORT and H 2000 One Metric 294 9
stainless steel plate sliding on stainless steel plate with mild steel matrix including all and 2200 Tonne
accessories as per drawings and technical specifications etc. complete.
456 Bridge Bearings 13.09 MORTH Supplying, fitting and fixing in position true to line and level POT- PTFE bearing MORT and H 2000 One Metric 214 7
consisting of a metal piston supported by a disc or unreinforced elastomer confined within and 2200 Tonne
a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel
mating surface, complete assembly to be of cast steel / fabricated structural steel, metal
and elastomer elements to be as per IRC: 83 part I and II respectively and other parts
conforming to BS:5400, section 9.1 and 9.2 and clause 2006 of MoRTH specifications as
per drawing and approved technical specifications etc. complete.
Page 92
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
458 Bridge Super 14.02 BR 35B a Providing and joining 25 mm diameter MS / TMT FE 500 steel reinforcement bars by As directed by One Number 1225 763
Structure bottle nuts including supplying and fitting them in position etc. complete. Engineer in charge
459 Bridge Super 14.03 BR 35B b Providing and joining 32 mm diameter MS /TMT FE 500 steel reinforcement bars by As directed by One Number 1427 763
Structure bottle nuts including supplying and fitting them in position etc. complete. Engineer in charge.
460 Bridge Super 14.04 BR 36A Providing welded joints for 25 mm and below diameter bars for steel reinforcement etc. BR.36 Page Number One Number 430 323
Structure complete. 134
461 Bridge Super 14.05 BR 36B Providing welded joints for 32 mm and below diameter bars for steel reinforcement etc. BR.36 Page Number One Number 438 323
Structure complete. 134
462 Bridge Super 14.06 BR Providing and fixing in position to the exact profile and prestressing the high tensile As directed by One Metric 185100 9502
Structure strands to specified ultimate strength, standard end anchorages, cable ducts, grouting Engineer in charge. Tonne
ducts after prestressing and bearing plates with wedges as per detailed drawings including
necessary plant and machinery for prestressing etc. complete.
463 Bridge Super 14.07 BR 38A Providing and laying in situ / ready mix M-20 controlled cement concrete of trap/ granite/ BR.38(a) Page One Cubic Metre 10346 3169
Structure quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, Number 135 and B.
vibrating, curing, formwork, centering and finishing in cement plaster excluding 7, Page Number38
reinforcement etc. complete. (with fully automatic micro processor based PLC with
SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required
specifications ( VSI sand finely washed etc )
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
Page 93
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
464 Bridge Super 14.15 BR Providing and laying in situ / ready mix M-25 controlled cement concrete of trap/ granite/ BR.38(b and c) Page One Cubic Metre 11016 3169
Structure quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, Number 135 and B.
vibrating, curing, formwork, centering and finishing in cement plaster excluding 7, Page Number38
reinforcement etc. complete. (with fully automatic micro processor based PLC with
SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required
specifications ( VSI sand finely washed etc ) i) Height up to 5 m, normal rate.
465 Bridge Super 14.17 BR Providing and laying in situ / ready mix M-30 controlled cement concrete of trap/ granite/ BR.38(a) Page One Cubic Metre 11122 3169
Structure quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, Number 135 and B.
vibrating, curing, formwork, centering and finishing in cement plaster excluding 7, Page Number38
reinforcement etc. complete. (with fully automatic micro processor based PLC with
SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required
specifications ( VSI sand finely washed etc ) i) Height up to 5 m, normal rate.
466 Bridge Super 14.19 BR 38A Providing and laying in situ / ready mix M-20 controlled cement concrete of trap/ granite/ BR.38(b and c) Page One Cubic Metre 10710 3169
Structure quartzite/ gneiss metal for RCC work in main/ cross girders, diaphrams etc. including Number 135 and B.
ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding 7, Page Number38
reinforcement etc. complete. (with fully automatic micro processor based PLC with
SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required
specifications ( VSI sand finely washed etc ) i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
Page 94
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
467 Bridge Super 14.27 BR Providing and laying in situ / ready mix M-25 controlled cement concrete of trap/ granite/ BR.38(b and c) Page One Cubic Metre 11404 3169
Structure quartzite/ gneiss metal for RCC work in main/ cross girders, diaphrams etc. including Number 135 and B.
ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding 7, Page Number38
reinforcement etc. complete. (with fully automatic micro processor based PLC with
SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required
specifications ( VSI sand finely washed etc ) i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
468 Bridge Super 14.29 BR Providing and laying in situ / ready mix M-30 controlled cement concrete of trap/ granite/ BR.38(b and c) Page One Cubic Metre 11514 3169
Structure quartzite/ gneiss metal for RCC work in main/ cross girders, diaphrams etc. including Number 135 and B.
ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding 7, Page Number38
reinforcement etc. complete. (with fully automatic micro processor based PLC with
SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required
specifications ( VSI sand finely washed etc )i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
469 Bridge Super 14.31 MORTH C1-2604 Providing and laying buried type expansion joint (expansion gap being 20mm) covered BR.43 Page Number One Running 1035 213
Structure with 12mm thick 200 mm wide galvinised weldable structural steel plate as per IS 2062 138 Metre
placed symmetrically to the centre line of the joint, resting freely over the top surface of
the deck concrete, welding of 8mm diameter 100mm long galvanised nails spaced 300mm
intervals along the centre line of the plate, all as specified in MoRTH clause 2604 etc.
complete.
470 Bridge Super 14.32 BR 43A Providing copper plate expansion joints as per detailed drawing One Number 4/D-1 of BR.43 Page Number One Running 4484 213
Structure 1972 D type etc. complete. 138 Metre
471 Bridge Super 14.33 BR 43B Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. BR.43 Page Number One Square 1086 129
Structure complete. 138 Metre
472 Bridge Super 14.34 BR 45 Providing and laying in situ / ready mix 1:4:8 cement concrete of trap /granite /quartzite B R.45 Page One Cubic Metre 5272 1053
Structure /gneiss metal for haunch filling including compacting, curing, mixing etc. complete. (with Number 139
fully automatic micro processor based PLC with SCADA enabled with reversible drum
type mixer/ concrete batch mix plant (pan mixer) with fine agreegates of required
specifications ( VSI sand finely washed etc )
Page 95
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
473 Bridge Super 14.36 BR 46 Providing trap/ granite/ quartzite/ gneiss rubble filling over haunches and arches including BR.46 Page One Cubic Metre 947 123
Structure hand packing etc. complete. Number 140
474 Bridge Super 14.39 BR Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal BR.47(a) Page One Cubic Metre 6538 1160
Structure for wearing course 8cm thick including compacting, finishing, curing and filling in joints Number 140 and B.
with bitumen etc. complete. (with fully automatic micro processor based PLC with 7, Page Number38
SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required
specifications ( VSI sand finely washed etc )
475 Bridge Super 14.41 BR 48 Providing vent holes 100mm diameter GI pipe in the slab and wearing course with iron BR.48 Page One Number 704 62
Structure grill at the top and GI pipe at bottom as per drawing etc. complete. Number 142
476 Bridge Super 14.44.a BR Providing and laying in situ / ready mix M20 RCC of trap/ granite/ quartzite/ gneiss metal BR.50 Page One Cubic Metre 9587 3118
Structure for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, Number 143 and B.
formwork finishing and curing etc. complete. (excluding reinforcement, with fully 7, Page Number38
automatic micro processor based PLC with SCADA enabled concrete batch mix plant /
pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc )
RCC work of Ballast walls & Kerb
477 Bridge Super 14.44.b BR Providing and laying in situ / ready mix M20 RCC of trap/ granite/ quartzite/ gneiss metal BR.50 Page One Cubic Metre 10342 3118
Structure for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, Number 143 and B.
formwork finishing and curing etc. complete. (excluding reinforcement, with fully 7, Page Number38
automatic micro processor based PLC with SCADA enabled concrete batch mix plant /
pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc )
RCC work of Box returns
478 Bridge Super 14.44.c BR Providing and laying in situ / ready mix M20 RCC of trap/ granite/ quartzite/ gneiss metal BR.50 Page Number One Cubic Metre 11097 3118
Structure for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, 143 and B. 7, Page
formwork finishing and curing etc. complete. (excluding reinforcement, with fully Number38
automatic micro processor based PLC with SCADA enabled concrete batch mix plant /
pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc )
RCC work of Box Cell
Page 96
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
479 Bridge Super 14.47 BR 51 A Providing R.C.C. parapet with M-20 Cement concrete of trap / granite / quartzite / gneiss BR.51 (a) Page One Running 2209 942
Structure metal with cast in situ / precast panels as per the detailed drawing height of 1.1 mt.above Number 144 and B. Metre
top of road surface, with post of 225 mm x 190 mm at 2 meter or less at equal distance 7, Page Number38
suitable to span having 10 mm reinforcement of minimum 4 bars and 6 mm stirrups and
R.C.C panels of approved design at clear distance of 125 mm and thickness of 150 mm
with 10mm dia. 3 no.of bars reinforcement at top and bottom and 6 mm dia. 4 no.bars as
vertical or horizontal rails of size 100 mm x 150 mm and with clear speacing of 240 mm
including scaffolding, steel centering, plywood/steel formwork, compacting finishing,
uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a
smooth and even surface and curing etc. complete. (Including cost of reinforcement &
cover block.)
480 Bridge Super 14.48 BR 51B Providing railing of mild steel angle post 2.0m center to center of section 75mm x 75mm B.R.51(b) Page One Running 3870 37
Structure x 10mm or equivalent I/C section of height 1.05 above bridge surface with minimum Number 145 Metre
anchor length of 30cm including hold fast of 25mm diameter MS bar welded at the
bottom and concreting of 1:3:6 of size 30cm x 30cm x 30cm with three rows of 40mm B
class GI pipe provided at 30cm on center to center including scaffolding and one coat of
anticorrosive paint with two coats of oil painting, curing of concrete etc. complete.
481 Bridge Super 14.49 BR 51 E Providing railing of cast in situ R.C.C posts with (M-20) cement concrete trap / granite / BR.51(e) Page One Running 2499 300
Structure quartzite / gneiss metal size 150 mm x 150 mm x 1.240 mm and horizantal 3 nos. at Number 147 and IS Metre
distance 370 mm C/C and bottom bar 150 mm above kerb as per the detailed drawings 456 (2000)
(including cost of reinforcement) scaffolding,steel centering, plywood/steel formwork etc.
complete. The C.M. 1:3 plaster is considered for rendering uneven and honeycombed
surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.
(Wooden centering/formwork will not be allowed).
482 Bridge Super 14.50 BR 55 Providing 100mm diameter GI water spouts as per detailed drawings in RCC slab and BR.55 Page Number One Number 1127 308
Structure wearing surface / kerb etc. complete. 150
483 Bridge Super 14.55 MORTH Providing and laying 6 mm thick mastic asphalt wearing course on top of deck slab MORT and H 500, One Square 353 60
Structure excluding prime coat with paving grade bitumen meeting the requirements given in table 2700 Metre
500-29, prepared by using mastic cooker and laid to required level and slope after cleaning
the surface including providing antiskid surface with bitumen precoated fine grained hard
stone chipping at an approximate spacing of 10 cm center to center in both directions,
pressed into surface when the temperature of surfaces not less than 100 deg C, protruding
1 mm to 4mm over mastic surface as per clause 515 etc. complete.
Page 97
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
484 Bridge Super 14.55.a MORTH Providing and laying 12 mm thick mastic asphalt wearing course on top of deck slab MORT and H 500, One Square 496 109
Structure excluding prime coat with paving grade bitumen meeting the requirements given in table 2700 Metre
500-29, prepared by using mastic cooker and laid to required level and slope after cleaning
the surface including providing antiskid surface with bitumen precoated fine grained hard
stone chipping of 4.75 mm nominal size at the rate of 0.005 cum per 10 One Square
Metre and at an approximate spacing of 10 cm center to center in both directions, pressed
into surface when the temperature of surfaces not less than 100 deg C, protruding 1 mm to
4mm over mastic surface as per clause 515 etc. complete.
485 Bridge Super 14.56 MORTH Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, MORT and H 2700, One Running 2277 214
Structure true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to 1500, 1600 and 1700 Metre
centre spacing between vertical post not to exceed 2000 mm, leaving adequate space
between vertical post for expansion as per approved drawings and technical specifications
etc. complete.
486 Bridge Super 14.57 MORTH Construction of RCC railing of M30 Grade in situ / ready mix with 20 mm nominal size MORT and H 2700, One Running 2402 214
Structure aggregate true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, 1500, 1600 and 1700 Metre
center to center spacing between vertical post not to exceed 2000 mm, leaving adequate
space between vertical post for expansion, complete with fully automatic micro processor
PLC with SCADA enabled reversible drum type mixer/ concrete batch mix plant (pan
mixer) as per approved drawings and technical specifications etc. complete with fine
agreegates of required specifications ( VSI sand finely washed etc )
487 Bridge Super 14.58 MORTH Providing and laying in PCC M15 grade leveling course below approach slab complete MORT and H 1700 One Cubic Metre 5976 927
Structure with fully automatic micro processor PLC with SCADA enabled reversible drum type and 2700
mixer/ concrete batch mix plant (pan mixer) as per drawings and Technical specifications
etc. complete with fine agreegates of required specifications ( VSI sand finely washed etc
)
488 Bridge Super 14.59 MORTH Providing and laying of RCC in M30 grade approach slab including reinforcement and MORT and H 1500, One Cubic Metre 11341 1289
Structure formwork complete with fully automatic micro processor PLC with SCADA enabled 1600, 1700 and 2700
reversible drum type mixer/ concrete batch mix plant (pan mixer) as per drawings and
technical specifications etc. complete with fine agreegates of required specifications ( VSI
sand finely washed etc )
489 Bridge Super 14.60 MORTH Providing, transporting and placing in position precast pretensioned concrete girders as MORT and H 1800, One Cubic Metre 28781 4517
Structure per drawings and technical specifications etc. complete. 2300
490 Bridge Super 14.61 MORTH Providing and applying two coat of water based cement paint to un plastered concrete MORT and H 2800, One Square 209 34
Structure surface after cleaning the surface of dirt, dust, oil, grease, efflorescence etc. complete. Metre
(applying 1 litre paint on 2 One Square Metret)
Page 98
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
491 Bridge Super 14.62 MORTH Providing and laying a burried expansion joint, expansion gap being 20 mm, covered with MORT and H 2600 One Running 2095 32
Structure 12 mm thick, 200 mm wide galvanized weldable structural steel plate as per IS: 2062, Metre
placed symmetrical to center line of the joint, resting freely over the top surface of the
deck concrete, welding of 8 mm diameter 100 mm long galvanised nails spaced 300 mm
c/c along the center line of the plate, all as specified in clause 2604 etc. complete.
492 Bridge Super 14.63 MORTH Providing and filling 20 mm thick compressible fibre board in expansion joint complete as MORT and H 2600 One Running 382 11
Structure per drawings and technical specifications etc. complete. Metre
493 Bridge Super 14.64 MORTH Providing and filling joint sealing compound with coarse sand and 6% bitumen by weight MORT and H 2600 One Running 46 32
Structure as per drawings and technical specifications etc. complete. Metre
494 Bridge Super 14.65 MORTH Providing and laying of asphaltic plug joint to provide for horizontal movement of 25 mm MORT and H 2600 One Running 1752 71
Structure and vertical movement of 2 mm, depth of joint varying from 75 mm to 100 mm, width Metre
varying from 500 mm to 750 mm in traffic direction covered with a closure plate of 200
mm X 6 mm of weldable structural steel conforming to IS:2062, asphaltic plug to consist
of polymer modified bitumen binder, carefully selected single size aggregate to 12.5mm
nominal size and a heat resistant foam caulking /backer rod all as per approved drawings
and specifications etc. complete.
495 Bridge Super 14.66 MORTH Providing and laying of an elastomeric slab steel expansion joint, catering to right or skew MORT and H 2600 One Running 13312 99
Structure in less than 20 degree, moderately curved with maximum horizontal movement upto 50 Metre
mm to be installed by the manufacture / supplier or their authorized representative
ensuring compliance to the manufactures instructions for installation for road and bridge
works as per approved drawings and standard specifications etc. complete.
496 Bridge Super 14.67 MORTH Providing and laying of compression seal joint consisting of steel armoured nosing at two MORT and H 2600 One Running 4772 59
Structure edges of the joint gap suitably anchored to the deck concrete and a preformed chloroprene Metre
elastomer or closed cell foam joint sealer compressed and fixed into the joint gap with
special adhesive binder to cater for a horizontal movement upto 40 mm and vertical
movement of 3 mm etc. complete.
497 Bridge Super 14.68 MORTH Providing and laying of a strip seal expansion joint catering to maximum horizontal MORT and H ? 2600 One Running 13295 82
Structure movement upto 70 mm to be installed by the manufacturer / supplier to their authorized Metre
representative ensuring compliance to the manufacturers instruction for installation as per
approved drawings and standard specifications etc. complete.
498 Bridge Super 14.69 MORTH Providing and laying boulders apron on river bed for protection against scour with stone MORT and H-2500 One Cubic Metre 1872 878
Structure boulders weighing not less than 40Kilogrameach complete as per drawings and Technical
specifications etc. complete. (boulder laid without wire crates)
Page 99
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
499 Bridge Super 14.70 MORTH Providing and laying of boulder apron laid in wire crates made with 4 mm dia GI wire MORT and H-2500 One Cubic Metre 2634 632
Structure conforming to IS:2801 and IS:4828 in 100 mm X 100 mm mesh weaved diagonally
including 10% extra for laps and joints laid with stone boulder weighing not less than
40Kilogrameach etc. complete.
500 Bridge Super 14.71 MORTH Providing and laying of apron with cement concrete blocks of size 0.50X0.50X0.50m cast MORT and H-2500 One Cubic Metre 6453 1278
Structure in situ / ready mix and made with nominal mix of M15 grade cement concrete with a
minimum cement content of 250Kilogram/cum with fully automatic micro processor PLC
with SCADA enabled reversible drum type mixer/ concrete batch mix plant (pan mixer)
as per IRC:21-2000 etc. complete.
501 Bridge Super 14.72 MORTH Providing and laying pitching on slopes laid over prepared filter media including boulder MORT and H-2500 One Cubic Metre 1872 878
Structure apron laid dry in front of toe of embankment complete as per drawing and technical
specifications etc. complete. (by stone/boulder)
502 Bridge Super 14.73 MORTH Providing and laying pitching on slopes laid over prepared filter media including boulder MORT and H-2500 One Cubic Metre 6288 1121
Structure apron laid dry in front of toe of embankment complete with fully automatic micro
processor PLC with SCADA enabled reversible drum type mixer/ concrete batch mix
plant (pan mixer) as per drawings and technical specifications etc. complete. (concrete
blocks of size 0.30x 0.30x0.30m in CC M15 grade) with fine agreegates of required
specifications ( VSI sand finely washed etc )
503 Bridge Super 14.74 MORTH Providing and laying filter material underneath pitching in slopes as per drawings and MORT and H-2500 One Cubic Metre 2506 981
Structure technical specifications etc. complete.
504 Bridge Super 14.75 MORTH Laying of a geotextile filter between pitching and embankment slopes on which pitching MORT and H 700 One Square 319 194
Structure is laid to prevent escape of the embankment material through the voids of the stone and 1500 Metre
pitching / cement concrete blocks as well as to allow free movement of water without
creating any uplift head on the pitching etc. complete.
505 Bridge Super 14.76 MORTH Providing and laying rubble stone flooring laid in cement mortar 1:3 as per drawings and MORT and H 2500 One Cubic Metre 6671 2230
Structure technical specifications etc. complete.
506 Bridge Super 14.77 MORTH Providing and laying cement concrete blocks of M15 grade flooring laid in cement mortar MORT and H 2500 One Cubic Metre 7813 1660
Structure 1:3 as per drawings and technical specifications etc. complete.
507 Bridge Super 14.78 MORTH Construction of dry rubble flooring at cross drainage works etc. complete. MORT and H 2500 One Cubic Metre 3719 2724
Structure
508 Bridge Super 14.79 MORTH Construction of stone masonry curtain wall in cement mortar 1:3 as per drawings and MORT and H 2500 One Cubic Metre 5900 2887
Structure technical specifications etc. complete.
509 Bridge Super 14.81 MORTH Providing flexible apron of 100 cm thick comprising of loose stone boulders weighing not MORT and H ? 2500 One Cubic Metre 1985 990
Structure less than 40Kilogrambeyond curtain wall etc. complete.
Page 100
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
510 Bridge Super 14.82 MORTH Providing and construction of a gabian structure for retaining earth with segments of wire MORT and H-2500 One Cubic Metre 2561 207
Structure crates of size 7.0 x 3.0 x 0.6m each divided into 1.5 m compartments by cross netting,
made form 4 mm galvansed steel wire @ 32Kilogram per 10 One Square Metre having
minimum tensile strength of 300Mpa conforming to IS:280 and galvanizing coating
conforming to IS:4826 woven into mesh with double twist, mesh size not exceeding
100x100mm, filled with boulders with least dimension of 200mm, all loose ends to be tied
with 4mm galvanized steel wire etc. complete.
511 Bridge Super 14.83 MORTH Providing and constructing gabain structures for erosion control, river training works and MORT and H-2500 One Cubic Metre 4569 733
Structure protection works with wire crates of size 2.0m x 1.0m x 0.30m each divided into 1 m
compartments by-cross netting, made from 4 mm galvanized steel wire @ 32Kilogramper
10 One Square Metre having minimum tensile strength of 300Mpa conforming to IS:280
and galvanizing coating conforming to IS 4826, wovan into mesh with double twist, mesh
size not exceeding 100 x 100mm, filled with boulders with least dimension of 200mm, all
loose ends to be securely tied with 4mm galvanized steel wire etc. complete.
512 Bridge Super 14.84 MORTH Removal of existing 75mm thick cement concrete wearing coat including its disposal MORT and H-2800 One Square 219 79
Structure complete as per technical specification without causing any detrimental effect to any part Metre
of the bridge structure and removal of dismantled material with all lifts and lead up to
1000m etc. complete.
513 Bridge Super 14.85 MORTH Removal of existing asphaltic wearing coat comprising of 50mm thick asphaltic concrete MORT and H-2800 One Square 160 58
Structure laid over 12 mm thick mastic asphalt including disposal with all lift and lead upto 100m Metre
etc. complete.
514 Bridge Super 14.86 MORTH Providing and laying cement concrete wearing coat M30 grade with batch mix type / MORT and H ? 2700 One Cubic Metre 13139 1357
Structure concrete mixer with SCADA including reinforcement as per drawings and technical
specifications etc. complete with fine agreegates of required specifications ( VSI sand
finely washed etc )
515 Bridge Super 14.87 MORTH Providing and laying of reinforced cement concrete in M-30 grade approach slab / Rigid MORT and H ? One Cubic Metre 8193 1289
Structure Pavement including formwork complete with fully automatic micro processor based PLC 1500, 1600, 1700
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan and 2700
mixer) as per drawings and technical specifications etc. complete with fine agreegates of
required specifications ( VSI sand finely washed etc ) ( excluding reinforcement )
516 Bridge Super 14.88 BR 62 Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and As directed by One Square 1476 123
Structure normal size metal in specified thickness as per detailed drawing including supplying all Engineer in charge Metre
materials, hand packing of rubble, spreading metal in layers and hard murum including
watering and compaction with power roller etc. complete.
Page 101
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
517 Bridge Super 14.89 Providing and laying in situ M35 controlled cement concrete of trap/ granite/ quartzite/ As directed by One Cubic 11702 3169
Structure gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, Engineer in charge Metre
formwork, centering and finishing in cement plaster excluding reinforcement etc.
complete. (with fully automatic micro processor based PLC with SCADA enabled
concrete batch mix plant / pan mixer with natural sand)
i) Height up to 5 m, normal rate. ii) Height 5
to 7.50 m, add 5 percent extra.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
518 Bridge Super 14.90 Providing and laying in situ M40 controlled cement concrete of trap/ granite/ quartzite/ As directed by One Cubic 11915 3169
Structure gneiss metal for PSC work in solid/ deck slab etc. including ramming, vibrating, curing, Engineer in charge Metre
formwork, centering and finishing in cement plaster excluding reinforcement etc.
complete. (with fully automatic micro processor based PLC with SCADA enabled
concrete batch mix plant / pan mixer with natural sand)
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
519 Bridge Super 14.91 Providing and laying in situ M35 controlled cement concrete of trap/ granite/ quartzite/ As directed by One Cubic 12114 3169
Structure gneiss metal for RCC work in main/ cross girders, diaphrams etc. including ramming, Engineer in charge Metre
vibrating, curing, formwork, centering and finishing in cement plaster excluding
reinforcement etc. complete. (with fully automatic micro processor based PLC with
SCADA enabled concrete batch mix plant / pan mixer with natural sand)
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
Page 102
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
520 Bridge Super 14.92 Providing and laying in situ M40 controlled cement concrete of trap/ granite/ quartzite/ As directed by One Cubic 12335 3169
Structure gneiss metal for PSC work in main/ cross girders, diaphrams etc. including ramming, Engineer in charge Metre
vibrating, curing, formwork, centering and finishing in cement plaster excluding
reinforcement etc. complete. (with fully automatic micro processor based PLC with
SCADA enabled concrete batch mix plant / pan mixer with natural sand)
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
Page 103
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
522 Bridge : Bored 15.03 MORTH Excavation for foundation of structure as per drawing and technical specifications M.O.R.T and H - 304 One Cubic Metre 819 231
Pile including setting out, construction of shoring , brushing, removal of stumps and other
deleterious matter, dressing of side and bottom and back filling with approved material
etc. complete. (in marshy soil by mechanical means)
523 Bridge : Bored 15.04 BR Providing and laying cast in situ / ready mix M30 RCC for 475 mm diameter bored piles BR-21 Page 124, One Running 3060 401
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete with fine agreegates of required specifications VSI sand finely
washed etc
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
524 Bridge : Bored 15.05 MORTH Providing and filling annular space around footing in rock by using concrete of M15 grade M.O.R.T and H - One Cubic Metre 5651 786
Pile etc. complete. 2100
Page 104
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
525 Bridge : Bored 15.06 BR Providing and laying cast in situ / ready mix M30 RCC for 500 mm diameter bored piles BR-21 Page 124, One Running 3182 416
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
526 Bridge : Bored 15.07 MORTH Providing and filling sand in foundation trenches / below Raft as per drawing and M.O.R.T and H - One Cubic Metre 2656 231
Pile technical specifications etc. complete. (Coarse Sand and Gravel ) 300,2100
527 Bridge : Bored 15.08 BR Providing and laying cast in situ / ready mix M30 RCC for 525 mm diameter bored piles BR-21 Page 124, One Running 3309 431
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
528 Bridge : Bored 15.09 MORTH Providing stone masonry work in cement mortar 1:3 in foundation with watering complete M.O.R.T and H - One Cubic Metre 5823 2911
Pile as per drawings and technical specifications etc. complete. (coursed rubble masonry, first 1400
sort)
Page 105
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
529 Bridge : Bored 15.10 BR Providing and laying cast in situ / ready mix M30 RCC for 550mm diameter bored piles BR-21 Page 124, One Running 3443 448
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications VSI sand finely
washed etc
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
530 Bridge : Bored 15.11 MORTH Providing stone masonry work in cement mortar 1:3 in foundation with watering complete M.O.R.T and H - One Cubic Metre 5593 2663
Pile as per drawings and technical specifications etc. complete. (random rubble masonry) 1400
531 Bridge : Bored 15.12 BR Providing and laying cast in situ / ready mix M30 RCC for 600mm diameter bored piles BR-21 Page 124, One Running 5027 503
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
532 Bridge : Bored 15.13 MORTH Providing and laying PCC in M15 grade levelling course of 100 mm thick below pile cap M.O.R.T and H - One Cubic Metre 5216 1130
Pile with fully automatic micro processor PLC with SCADA enabled reversible drum type 1100, 1700
mixer/ concrete batch mix plant (pan mixer) etc. complete.
Page 106
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
533 Bridge : Bored 15.14 BR Providing and laying cast in situ / ready mix M30 RCC for 625mm diameter bored piles BR-21 Page 124, One Running 5180 521
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
534 Bridge : Bored 15.15 MORTH Providing Ist class brick masonry work in 1:3 in sub structure complete with watering as MORT and H ? One Cubic Metre 8101 1476
Pile per drawings and technical specifications etc. complete. (excluding pointing and 1300, 2200
plastering)
535 Bridge : Bored 15.16 BR Providing and laying cast in situ / ready mix M30 RCC for 650mm diameter bored piles BR-21 Page 124, One Running 5340 541
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 107
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
536 Bridge : Bored 15.18 BR Providing and laying cast in situ / ready mix M30 RCC for 750mm diameter bored piles BR-21 Page 124, One Running 7779 778
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
537 Bridge : Bored 15.20 BR Providing and laying cast in situ / ready mix M30 RCC for 800 mm diameter bored piles BR-21 Page 124, One Running 8197 854
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
538 Bridge : Bored 15.58 BR Providing and laying cast in situ / ready mix M30 RCC for 825 mm diameter bored piles BR-21 Page 124, One Running 8535 919
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 108
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
539 Bridge : Bored 15.60 BR Providing and laying cast in situ / ready mix M30 RCC for 900 mm diameter bored piles BR-21 Page 124, One Running 9277 1067
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
540 Bridge : Bored 15.62 BR Providing and laying cast in situ / ready mix M30 RCC for 975 mm diameter bored piles BR-21 Page 124, One Running 10070 1220
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 109
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
541 Bridge : Bored 15.64 BR Providing and laying cast in situ / ready mix M30 RCC for 1000 mm diameter bored piles BR-21 Page 124, One Running 12352 1545
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
542 Bridge : Bored 15.66 BR Providing and laying cast in situ / ready mix M30 RCC for 1050 mm diameter bored piles BR-21 Page 124, One Running 13380 1659
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 110
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
543 Bridge : Bored 15.68 BR Providing and laying cast in situ / ready mix M30 RCC for 1100 mm diameter bored piles BR-21 Page 124, One Running 14462 1807
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
544 Bridge : Bored 15.70 BR Providing and laying cast in situ / ready mix M30 RCC for 1200 mm diameter bored piles BR-21 Page 124, One Running 17082 2191
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
545 Bridge : Bored 15.72 BR Providing and laying cast in situ / ready mix M30 RCC for 1500 mm diameter bored piles BR-21 Page 124, One Running 26701 3407
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 111
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
546 Bridge : Bored 15.110 BR Providing and laying cast in situ / ready mix M35 RCC for 450 mm diameter bored piles BR-21 Page 124, One Running 3021 399
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
547 Bridge : Bored 15.111 BR Providing and laying cast in situ / ready mix M35 RCC for 475 mm diameter bored piles BR-21 Page 124, One Running 3178 445
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications (VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
548 Bridge : Bored 15.112 BR Providing and laying cast in situ / ready mix M35 RCC for 500 mm diameter bored piles BR-21 Page 124, One Running 3311 461
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 112
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
549 Bridge : Bored 15.113 BR Providing and laying cast in situ / ready mix M35 RCC for 525 mm diameter bored piles BR-21 Page 124, One Running 3452 478
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications (VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
550 Bridge : Bored 15.114 BR Providing and laying cast in situ / ready mix M35 RCC for 550 mm diameter bored piles BR-21 Page 124, One Running 3606 496
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
551 Bridge : Bored 15.115 BR Providing and laying cast in situ / ready mix M35 RCC for 600 mm diameter bored piles BR-21 Page 124, One Running 5217 557
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 113
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
552 Bridge : Bored 15.116 BR Providing and laying cast in situ / ready mix M35 RCC for 625 mm diameter bored piles BR-21 Page 124, One Running 5387 578
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
553 Bridge : Bored 15.117 BR Providing and laying cast in situ / ready mix M35 RCC for 650 mm diameter bored piles BR-21 Page 124, One Running 5563 600
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications (VSI sand finely
washed etc )oncrete batch mix plant / pan mixer etc. complete.
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
554 Bridge : Bored 15.118 BR Providing and laying cast in situ / ready mix M35 RCC for 750 mm diameter bored piles BR-21 Page 124, One Running 8075 863
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 114
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
555 Bridge : Bored 15.119 BR Providing and laying cast in situ / ready mix M35 RCC for 800 mm diameter bored piles BR-21 Page 124, One Running 8536 947
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
556 Bridge : Bored 15.120 BR Providing and laying cast in situ / ready mix M35 RCC for 825 mm diameter bored piles BR-21 Page 124, One Running 8806 1020
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
557 Bridge : Bored 15.121 BR Providing and laying cast in situ / ready mix M35 RCC for 900 mm diameter bored piles BR-21 Page 124, One Running 9598 1183
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 115
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
558 Bridge : Bored 15.122 BR Providing and laying cast in situ / ready mix M35 RCC for 975 mm diameter bored piles BR-21 Page 124, One Running 10448 1353
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
559 Bridge : Bored 15.123 BR Providing and laying cast in situ / ready mix M35 RCC for 1000 mm diameter bored piles BR-21 Page 124, One Running 12768 1548
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
560 Bridge : Bored 15.124 BR Providing and laying cast in situ / ready mix M35 RCC for 1050 mm diameter bored piles BR-21 Page 124, One Running 14295 1662
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 116
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
561 Bridge : Bored 15.125 BR Providing and laying cast in situ / ready mix M35 RCC for 1100 mm diameter bored piles BR-21 Page 124, One Running 14966 1811
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
562 Bridge : Bored 15.126 BR Providing and laying cast in situ / ready mix M35 RCC for 1200 mm diameter bored piles BR-21 Page 124, One Running 17681 2195
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
563 Bridge : Bored 15.127 BR Providing and laying cast in situ / ready mix M35 RCC for 1500 mm diameter bored piles BR-21 Page 124, One Running 27632 3414
Pile each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with fine agreegates of required specifications ( VSI sand finely
washed etc )
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 117
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
564 Bridge : Bored 15.128 BR Providing, placing and driving in position 6mm thick permanent MS liner up to required MORTH 4th Metric Tonne 104593 17608
Pile depth with 12 mm thick MS cutting edge of 0.50 meter length of bottom including Revision No.1204
fabricating, cutting the MS sheet to required diameter and shape, welding the joints and and 1904
driving with the help of required machineries, all materials, labour and lift etc. complete.
565 Bridge : Bored 15.129 BR Providing and laying cast in situ / ready mix M40 RCC for 450 mm diameter bored piles BR-21 Page 124, One Running 3051 399
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
566 Bridge : Bored 15.130 BR Providing and laying cast in situ / ready mix M40 RCC for 475 mm diameter bored piles BR-21 Page 124, One Running 3210 445
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 118
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
567 Bridge : Bored 15.131 BR Providing and laying cast in situ / ready mix M40 RCC for 500 mm diameter bored piles BR-21 Page 124, One Running 3332 461
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
568 Bridge : Bored 15.132 BR Providing and laying cast in situ / ready mix M40 RCC for 525 mm diameter bored piles BR-21 Page 124, One Running 3492 478
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
569 Bridge : Bored 15.133 BR Providing and laying cast in situ / ready mix M40 RCC for 550 mm diameter bored piles BR-21 Page 124, One Running 3650 496
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 119
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
570 Bridge : Bored 15.134 BR Providing and laying cast in situ / ready mix M40 RCC for 600 mm diameter bored piles BR-21 Page 124, One Running 5269 557
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
571 Bridge : Bored 15.135 BR Providing and laying cast in situ / ready mix M40 RCC for 625 mm diameter bored piles BR-21 Page 124, One Running 5443 578
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
572 Bridge : Bored 15.136 BR Providing and laying cast in situ / ready mix M40 RCC for 650 mm diameter bored piles BR-21 Page 124, One Running 5624 600
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sandoncrete batch mix plant / pan mixer
etc. complete. (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 120
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
573 Bridge : Bored 15.137 BR Providing and laying cast in situ / ready mix M40 RCC for 750 mm diameter bored piles BR-21 Page 124, One Running 8155 863
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
574 Bridge : Bored 15.138 BR Providing and laying cast in situ / ready mix M40 RCC for 800 mm diameter bored piles BR-21 Page 124, One Running 8627 946
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
575 Bridge : Bored 15.139 BR Providing and laying cast in situ / ready mix M40 RCC for 825 mm diameter bored piles BR-21 Page 124, One Running 8903 1019
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 121
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
576 Bridge : Bored 15.140 BR Providing and laying cast in situ / ready mix M40 RCC for 900 mm diameter bored piles BR-21 Page 124, One Running 9714 1182
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
577 Bridge : Bored 15.141 BR Providing and laying cast in situ / ready mix M40 RCC for 975 mm diameter bored piles BR-21 Page 124, One Running 10587 1353
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
578 Bridge : Bored 15.142 BR Providing and laying cast in situ / ready mix M40 RCC for 1000 mm diameter bored piles BR-21 Page 124, One Running 12912 1548
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 122
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
579 Bridge : Bored 15.143 BR Providing and laying cast in situ / ready mix M40 RCC for 1050 mm diameter bored piles BR-21 Page 124, One Running 14453 1662
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
580 Bridge : Bored 15.144 BR Providing and laying cast in situ / ready mix M40 RCC for 1100 mm diameter bored piles BR-21 Page 124, One Running 15140 1811
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
581 Bridge : Bored 15.145 BR Providing and laying cast in situ / ready mix M40 RCC for 1200 mm diameter bored piles BR-21 Page 124, One Running 17887 2195
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 123
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
582 Bridge : Bored 15.146 BR Providing and laying cast in situ / ready mix M40 RCC for 1500 mm diameter bored piles BR-21 Page 124, One Running 27949 3407
Pile New Item each of load capacity as per design and of specified diameter of as directed, placed MORTH - 1100 and Metre
through steel shell sunk to the required depth through all strata except rock, excluding 1700
provision of reinforcement including placing concrete by tremie arrangement, compaction
of concrete and withdrawal of steel shell with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan
mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Page 124
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
585 Bridge 16.03 BR Providing and applying well mixed polymer cement slurry in ratio 1:2 over well soaked As directed by One Square 823 64
Maintenance but surface dry concrete and steel rebar for adhesion of fresh cement and sand mortar as Engineer in charge. Metre
per specification as directed etc. complete. (item includes use of polymers like
sikaapproved or similar materials of relevant specification and scaffolding for height 8 to
10 meter)
586 Bridge 16.04 BR Repairs of expansion joints by removing rich mix cement concrete including stacking the As directed by One Square 3710 1155
Maintenance spoil as directed with all leads, lifts etc. complete. (use of equipments like air compressor Engineer in charge. Metre
is considered in the item)
587 Bridge 16.07 BR Providing and laying in situ / ready mix M35 grade RCC jacketing work around the As directed by One Cubic Metre 7734 1788
Maintenance existing piers of bridges etc. complete. (with fully automatic micro processor based PLC Engineer in charge.
with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of
required specifications ( VSI sand finely washed etc ), height of 8 to 10 meter)
588 Bridge 16.09 BR Providing and injecting epoxy grout including structuring of cracks in the body of slab As directed by One Number 2766 354
Maintenance girder, fixing inlet tube arrangement including cost of materials, machinery required for Engineer in charge.
the work labour charges etc. (2kg of grout is considered per hole)
Page 125
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Page 126
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
596 Bridge : Well 17.08 BR Sinking of 6 m Dia. well for foundation in hard strata (Hard Rock)/Boulder etc. which can MORT&H (5th One Running 100707 15198
Foundation be removed by grabing and chiselling soft disintegrated rock which requires special Rev.) 1208 Meter
efforts, including blasting, large scale dewatering, heavy chiselling, cutting by pneumatic
tools and all materials available to sink through such strata including removal of obstacles
and use of necessary plant and machinery, driver etc and proper setting of wells including
all methods except pneumatic sinking (depth 0 to 5 Metres).
Note : Add
1)30% Extra for 5 to 10 M depth
2)40% Extra for 10 to 15 M depth
3) 60% Extra for depth 15 M to 20 M
4) 100% Extra for depth above 20 M.
597 Bridge : Well 17.09 BR Sinking of 7 m Dia. well for foundation in hard strata (Hard Rock)/Boulder etc. which can MORT&H (5th One Running 119584 19186
Foundation be removed by grabing and chiselling soft disintegrated rock which requires special Rev.) 1208 Meter
efforts, including blasting, large scale dewatering, heavy chiselling, cutting by pneumatic
tools and all materials available to sink through such strata including removal of obstacles
and use of necessary plant and machinery, driver etc and proper setting of wells including
all methods except pneumatic sinking (depth 0 to 5 Metres).
Note : Add
1)30% Extra for 5 to 10 M depth
2)40% Extra for 10 to 15 M depth
3) 60% Extra for depth 15 M to 20 M
4) 100% Extra for depth above 20 M.
598 Bridge : Well 17.10 BR Sinking of 8 m Dia. well for foundation in hard strata (Hard Rock)/Boulder etc. which can MORT&H (5th One Running 167261 24755
Foundation be removed by grabing and chiselling soft disintegrated rock which requires special Rev.) 1208 Meter
efforts, including blasting, large scale dewatering, heavy chiselling, cutting by pneumatic
tools and all materials available to sink through such strata including removal of obstacles
and use of necessary plant and machinery, driver etc and proper setting of wells including
all methods except pneumatic sinking (depth 0 to 5 Metres).
Note : Add
1)30% Extra for 5 to 10 M depth
2)40% Extra for 10 to 15 M depth
3) 60% Extra for depth 15 M to 20 M
4) 100% Extra for depth above 20 M.
Page 127
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
599 Bridge : Well 17.11 BR Sinking of 9 m Dia. well for foundation in hard strata (Hard Rock)/Boulder etc. which can MORT&H (5th One Running 180506 26372
Foundation be removed by grabing and chiselling soft disintegrated rock which requires special Rev.) 1208 Meter
efforts, including blasting, large scale dewatering, heavy chiselling, cutting by pneumatic
tools and all materials available to sink through such strata including removal of obstacles
and use of necessary plant and machinery, driver etc and proper setting of wells including
all methods except pneumatic sinking (depth 0 to 5 Metres).
Note : Add
1)30% Extra for 5 to 10 M depth
2)40% Extra for 10 to 15 M depth
3) 60% Extra for depth 15 M to 20 M
4) 100% Extra for depth above 20 M.
600 Bridge : Well 17.12 BR Sinking of 10 m Dia. well for foundation in hard strata (Hard Rock)/Boulder etc. which MORT&H (5th One Running 199726 30466
Foundation can be removed by grabing and chiselling soft disintegrated rock which requires special Rev.) 1208 Meter
efforts, including blasting, large scale dewatering, heavy chiselling, cutting by pneumatic
tools and all materials available to sink through such strata including removal of obstacles
and use of necessary plant and machinery, driver etc and proper setting of wells including
all methods except pneumatic sinking (depth 0 to 5 Metres).
Note : Add
1)30% Extra for 5 to 10 M depth
2)40% Extra for 10 to 15 M depth
3) 60% Extra for depth 15 M to 20 M
4) 100% Extra for depth above 20 M.
601 Bridge : Well 17.13 BR Providing and constructing one span service road 10m wide to reach island location. For 1 MORT&H (5th One Running 5613 157
Foundation pier location to another pier location ( Depth of standing water 1 m) Rev.) 1200 Meter
602 Bridge : Well 17.14 BR Providing and laying in situ / ready mix M-20 cement concrete Trap/ Granite/ Quartzite/ MORT&H (5th One Cubic Meter 7479 1655
Foundation Gneiss metal for R.C.C. well curbs including necessary compacting by vibrating, finishing Rev.) 1205
and curing complete. with fine agreegates of required specifications ( VSI sand finely
washed etc ) (excluding reinforcement and including shuttering) A) With Batch Mix Plant
With fully automatic micro processor based PLC with SCADA enabled
603 Bridge : Well 17.15 BR Providing and laying in situ / ready mix M-25 cement concrete Trap/ Granite/ Quartzite/ MORT&H (5th One Cubic Meter 7726 1655
Foundation Gneiss metal for R.C.C. well curbs including necessary compacting by vibrating, finishing Rev.) 1205
and curing complete. with fine agreegates of required specifications ( VSI sand finely
washed etc ) (excluding reinforcement and including shuttering) A) With Batch Mix Plant
With fully automatic micro processor based PLC with SCADA enabled
Page 128
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
604 Bridge : Well 17.16 BR Providing and laying in situ / ready mix M-30 cement concrete Trap/ Granite/ Quartzite/ MORT&H (5th One Cubic Meter 7886 1655
Foundation Gneiss metal for R.C.C. well curbs including necessary compacting by vibrating, finishing Rev.) 1205
and curing complete. with fine agreegates of required specifications ( VSI sand finely
washed etc ) (excluding reinforcement and including shuttering) A) With Batch Mix Plant
With fully automatic micro processor based PLC with SCADA enabled
605 Bridge : Well 17.17 BR Providing and laying in situ / ready mix M-35 cement concrete Trap/ Granite/ Quartzite/ MORT&H (5th One Cubic Meter 7973 1655
Foundation Gneiss metal for R.C.C. well curbs including necessary compacting by vibrating, finishing Rev.) 1205
and curing complete. with fine agreegates of required specifications ( VSI sand finely
washed etc ) (excluding reinforcement and including shuttering) A) With Batch Mix Plant
With fully automatic micro processor based PLC with SCADA enabled
606 Bridge : Well 17.18 BR Providing and laying in situ / ready mix M-20 cement concrete trap / granite / quartizite / MORT&H (5th One Cubic Meter 7055 1468
Foundation gneiss metal for the intermediate plug of wells in the dry or under water including Rev.) 1211
compation by vibrating and curing wherever necessary etc complete with fine agreegates
of required specifications ( VSI sand finely washed etc ) D) INTERMEDIATE PLUG
With Batch Mix Plant, With fully automatic micro processor based PLC with SCADA
enabled
607 Bridge : Well 17.19 BR Providing and laying in situ / ready mix M-25 cement concrete trap / granite / quartizite / MORT&H (5th One Cubic Meter 7131 1468
Foundation gneiss metal for the intermediate plug of wells in the dry or under water including Rev.) 1211
compation by vibrating and curing wherever necessary etc complete with fine agreegates
of required specifications ( VSI sand finely washed etc ) D) INTERMEDIATE PLUG
With Batch Mix Plant, With fully automatic micro processor based PLC with SCADA
enabled
608 Bridge : Well 17.20 BR Providing and laying in situ / ready mix M-30 cement concrete trap / granite / quartizite / MORT&H (5th One Cubic Meter 7472 1622
Foundation gneiss metal for the intermediate plug of wells in the dry or under water including Rev.) 1211
compation by vibrating and curing wherever necessary etc complete with fine agreegates
of required specifications ( VSI sand finely washed etc ) D) INTERMEDIATE PLUG
With Batch Mix Plant, With fully automatic micro processor based PLC with SCADA
enabled
609 Bridge : Well 17.21 BR Providing and laying in situ / ready mix M-25 cement concrete of trap / granite / quartzite/ MORT&H (5th One Cubic Meter 7568 1622
Foundation gniess metal for top plug of wells including compaction by vibration and curing etc Rev.) 1209
complete centering formwork shall be of steel/plywood B) With Batch Mix Plant With
fully automatic micro processor based PLC with SCADA enabled, fine agreegates of
required specifications ( VSI sand finely washed etc )
Page 129
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
610 Bridge : Well 17.22 BR Providing and laying in situ / ready mix M-30 cement concrete of trap / granite / quartzite/ MORT&H (5th One Cubic Meter 7668 1622
Foundation gniess metal for top plug of wells including compaction by vibration and curing etc Rev.) 1209
complete centering formwork shall be of steel/plywood B) With Batch Mix Plant With
fully automatic micro processor based PLC with SCADA enabled fine agreegates of
required specifications ( VSI sand finely washed etc )
611 Bridge : Well 17.23 BR Providing and laying in situ / ready mix M-25 cement concrete of trap / granite / MORT&H (5th One Cubic Meter 7664 1478
Foundation quartzite/ gniess metal for reinforced cement concrete well caps including necessary Rev.) 1700,
formwork compaction by vibrating finishing in CM 1:3 with fine agreegates of required 2205,2304
specifications ( VSI sand finely washed etc ) etc complete (Excluding reinforcement) A)
Well Cap (With with reversible drum type mixer/ concrete batch mix plant (pan mixer) .
612 Bridge : Well 17.24 BR Providing and laying in situ / ready mix M-30 cement concrete of trap / granite / MORT&H (5th One Cubic Meter 7810 1478
Foundation quartzite/ gniess metal for reinforced cement concrete well caps including necessary Rev.) 1700,
formwork compaction by vibrating finishing in CM 1:3 with fine agreegates of required 2205,2304
specifications ( VSI sand finely washed etc ) etc complete (Excluding reinforcement) A)
Well Cap (With with reversible drum type mixer/ concrete batch mix plant (pan mixer) .
613 Bridge : Well 17.25 BR Providing and laying in situ / ready mix M-35 cement concrete of trap / granite / MORT&H (5th One Cubic Meter 7589 1478
Foundation quartzite/ gniess metal for reinforced cement concrete well caps including necessary Rev.) 1700,
formwork compaction by vibrating finishing in CM 1:3 with fine agreegates of required 2205,2304
specifications ( VSI sand finely washed etc ) etc complete (Excluding reinforcement) A)
Well Cap (With with reversible drum type mixer/ concrete batch mix plant (pan mixer) .
614 Bridge : Well 17.26 BR Providing Sump pit in hard strata in wells as diercted or as shown in drawing including As directed by One Cubic Meter 4450 2701
Foundation shoring and strutting as necessary and disposing of excavted stuff Engineer-in Charge
615 Bridge : Well 17.27 BR Providing and filling in well with sand/ rubble and sand/ shingle and sand including MORT&H (5th One Cubic Meter 1822 246
Foundation compacting between the top and bottom plugs etc. Complete Rev.) 1210
616 Bridge sub 17.28 BR Providing and laying plain in situ / ready mix M-20 cement concrete of trap/ MORT&H (5th One Cubic Meter 7454 1775
structure and granite/quartzite/gneiss/crushed stone metal mechanically mixed, placed in foundation Rev.) 1700
Foundation and compacted by vibration including necessary bailing out water, curing curing concrete
batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand
finely washed etc ) (excluding dewatering by pump) for 14 days RCC Grade.With
Concrete Mixer
617 Bridge sub 17.29 BR Providing and laying plain in situ / ready mix M-25 cement concrete of trap/ MORT&H (5th One Cubic Meter 7832 1775
structure and granite/quartzite/gneiss/crushed stone metal mechanically mixed, placed in foundation Rev.) 1700
Foundation and compacted by vibration including necessary bailing out water, curing curing concrete
batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand
finely washed etc ) (excluding dewatering by pump) for 14 days RCC Grade.With
Concrete Mixer
Page 130
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
618 Bridge sub 17.30 BR Providing and laying plain in situ / ready mix M-30 cement concrete of trap/ MORT&H (5th One Cubic Meter 7983 1775
structure and granite/quartzite/gneiss/crushed stone metal mechanically mixed, placed in foundation Rev.) 1700
Foundation and compacted by vibration including necessary bailing out water, curing curing concrete
batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand
finely washed etc ) (excluding dewatering by pump) for 14 days RCC Grade.With
Concrete Mixer
619 Bridge sub 17.31 BR Providing and laying plain in situ / ready mix M-35 cement concrete of trap/ MORT&H (5th One Cubic Meter 8399 1775
structure and granite/quartzite/gneiss/crushed stone metal mechanically mixed, placed in foundation Rev.) 1700
Foundation and compacted by vibration including necessary bailing out water, curing curing concrete
batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand
finely washed etc ) (excluding dewatering by pump) for 14 days RCC Grade.With
Concrete Mixer
620 Bridge sub 17.32 BR Providing and laying in situ / ready mix M-20 controlled reinforced cement concrete of MORT&H (5th One Cubic Meter 6060 932
structure and trap metal for raft slab including "V" haunches, formwork, scaffolding, compaction by Rev.) 1700, 2304
Foundation vibrating, finishing curing etc. complete. concrete batch mix plant / pan mixer with fine
agreegates of required specifications ( VSI sand finely washed etc ) etc. complete.
(excluding reinforcement).
a) RCC Grade with reversible drum type mixer/ concrete batch mix plant (pan mixer) .
621 Bridge sub 17.33 BR Providing and laying in situ / ready mix M-25 controlled reinforced cement concrete of MORT&H (5th One Cubic Meter 6241 925
structure and trap metal for raft slab including "V" haunches, formwork, scaffolding, compaction by Rev.) 1700, 2304
Foundation vibrating, finishing curing etc. complete. concrete batch mix plant / pan mixer with fine
agreegates of required specifications ( VSI sand finely washed etc ) etc. complete.
(excluding reinforcement).
a) RCC Grade with reversible drum type mixer/ concrete batch mix plant (pan mixer) .
622 Bridge sub 17.34 BR Providing and laying in situ / ready mix M-30 controlled reinforced cement concrete of MORT&H (5th One Cubic Meter 6401 925
structure and trap metal for raft slab including "V" haunches, formwork, scaffolding, compaction by Rev.) 1700, 2304
Foundation vibrating, finishing curing etc. complete. concrete batch mix plant / pan mixer with fine
agreegates of required specifications ( VSI sand finely washed etc ) etc. complete.
(excluding reinforcement).
a) RCC Grade with reversible drum type mixer/ concrete batch mix plant (pan mixer) .
Page 131
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
623 Bridge sub 17.35 BR Providing and laying in situ / ready mix M-35 controlled reinforced cement concrete of MORT&H (5th One Cubic Meter 6529 925
structure and trap metal for raft slab including "V" haunches, formwork, scaffolding, compaction by Rev.) 1700, 2304
Foundation vibrating, finishing curing etc. complete. concrete batch mix plant / pan mixer with fine
agreegates of required specifications ( VSI sand finely washed etc ) etc. complete.
(excluding reinforcement).
a) RCC Grade with reversible drum type mixer/ concrete batch mix plant (pan mixer) .
624 Bridge sub 17.36 BR Prividing and fixing pressure relief pipes of 110 mm diametre of PVC as per drawing for MORT&H (5th One Running 479 83
structure and R.C.C Raft, galaries returns, abutments, wing wall etc complete. Rev.) 2705, 2706 Meter
Foundation
625 Bridge sub 17.37 BR Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for MORT&H (5th One Running 533 75
structure and abutment returns, return walls etc. Complete. Rev.) 2705, 2706 Meter
Foundation
626 Bridge sub 17.38 BR Providing and laying in situ / ready mix M-15 plain cement concrete of trap MORT&H (5th One Cubic Meter 7519 1929
structure and /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. Rev.) 1700, 2204
Foundation including provision of "V" shaped false joints to form suitable panels on the faces to
approve design with compacting by vibrating and curing complete, including
plywood/steel form work centering ( excluding dewatering by means of pump) and
including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by
engineer in charge basic rate shall be increased for height above 5.00 m in followinh
manners
(a) Height upto 5 M. (With Concrete Mixer)With fine agreegates of required
specifications ( VSI sand finely washed etc )
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
Page 132
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
627 Bridge sub 17.39 BR Providing and laying in situ / ready mix M-20 plain cement concrete of trap MORT&H (5th One Cubic Meter 8048 1929
structure and /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. Rev.) 1700, 2204
Foundation including provision of "V" shaped false joints to form suitable panels on the faces to
approve design with compacting by vibrating and curing complete, including
plywood/steel form work centering ( excluding dewatering by means of pump) and
including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by
engineer in charge basic rate shall be increased for height above 5.00 m in followinh
manners
(a) Height upto 5 M. (With Concrete Mixer)With fine agreegates of required
specifications ( VSI sand finely washed etc )
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
628 Bridge sub 17.40 Providing and laying in situ / ready mix M-25 plain cement concrete of trap One Cubic Meter 8212 1929
structure and /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc.
Foundation including provision of "V" shaped false joints to form suitable panels on the faces to
approve design with compacting by vibrating and curing complete, including
plywood/steel form work centering ( excluding dewatering by means of pump) and
including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by
engineer in charge basic rate shall be increased for height above 5.00 m in followinh
manners
(a) Height upto 5 M. (With Concrete Mixer)With fine agreegates of required
specifications ( VSI sand finely washed etc )
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
Page 133
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
629 Bridge sub 17.41 Providing and laying in situ / ready mix M-30 plain cement concrete of trap One Cubic Meter 8305 1929
structure and /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc.
Foundation including provision of "V" shaped false joints to form suitable panels on the faces to
approve design with compacting by vibrating and curing complete, including
plywood/steel form work centering ( excluding dewatering by means of pump) and
including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by
engineer in charge basic rate shall be increased for height above 5.00 m in followinh
manners
(a) Height upto 5 M. (With Concrete Mixer)With fine agreegates of required
specifications ( VSI sand finely washed etc )
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
630 Bridge sub 17.42 Providing and laying in situ / ready mix M-35 plain cement concrete of trap One Cubic Meter 9422 1929
structure and /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc.
Foundation including provision of "V" shaped false joints to form suitable panels on the faces to
approve design with compacting by vibrating and curing complete, including
plywood/steel form work centering ( excluding dewatering by means of pump) and
including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by
engineer in charge basic rate shall be increased for height above 5.00 m in followinh
manners
(a) Height upto 5 M. (With Concrete Mixer)With fine agreegates of required
specifications ( VSI sand finely washed etc )
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
Page 134
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
631 Bridge sub 17.43 BR Providing and laying in situ / ready mix M-20 plain cement concrete of trap MORT&H (5th One Cubic Meter 8776 1929
structure and /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. Rev.) 1700, 2204
Foundation including provision of "V" shaped false joints to form suitable panels on the faces to
approve design with compacting by vibrating and curing complete, including
plywood/steel form work centering ( excluding dewatering by means of pump) and
including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by
engineer in charge basic rate shall be increased for height above 5..00 m in followinh
manners
b) Height upto 5 M. (With Batch Mix Plant)
With fully automatic micro processor based PLC with SCADA enable with fine
agreegates of required specifications ( VSI sand finely washed etc )
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
632 Bridge sub 17.44 BR Providing and laying in situ / ready mix M-25 plain cement concrete of trap MORT&H (5th One Cubic Meter 8935 1929
structure and /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. Rev.) 1700, 2204
Foundation including provision of "V" shaped false joints to form suitable panels on the faces to
approve design with compacting by vibrating and curing complete, including
plywood/steel form work centering ( excluding dewatering by means of pump) and
including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by
engineer in charge basic rate shall be increased for height above 5..00 m in followinh
manners
b) Height upto 5 M. (With Batch Mix Plant)
With fully automatic micro processor based PLC with SCADA enable with fine
agreegates of required specifications ( VSI sand finely washed etc )
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
Page 135
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
633 Bridge sub 17.45 BR Providing and laying in situ / ready mix M-30 plain cement concrete of trap MORT&H (5th One Cubic Meter 9176 1929
structure and /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. Rev.) 1700, 2204
Foundation including provision of "V" shaped false joints to form suitable panels on the faces to
approve design with compacting by vibrating and curing complete, including
plywood/steel form work centering ( excluding dewatering by means of pump) and
including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by
engineer in charge basic rate shall be increased for height above 5..00 m in followinh
manners
b) Height upto 5 M. (With Batch Mix Plant)
With fully automatic micro processor based PLC with SCADA enable with fine
agreegates of required specifications ( VSI sand finely washed etc )
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
634 Bridge sub 17.46 BR Providing and laying in situ / ready mix M-35 plain cement concrete of trap MORT&H (5th One Cubic Meter 9528 1929
structure and /granite/quartzite/ gneiss metal for cast in situ piers, abutment, returns, wings etc. Rev.) 1700, 2204
Foundation including provision of "V" shaped false joints to form suitable panels on the faces to
approve design with compacting by vibrating and curing complete, including
plywood/steel form work centering ( excluding dewatering by means of pump) and
including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by
engineer in charge basic rate shall be increased for height above 5.00 m in following
manners
b) Height upto 5 M. (With Batch Mix Plant)
With fully automatic micro processor based PLC with SCADA enable with fine
agreegates of required specifications ( VSI sand finely washed etc )
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
Page 136
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
635 Bridge sub 17.47 BR Providing and laying in situ / ready mix M-20 cement concrete of trap /granite/quartzite/ MORT&H (5th One Cubic Meter 8088 1929
structure and gneiss metal for cast in citu R.C.C. solid piers,column etc . including provision of V Rev.) 1700, 2204,
Foundation shaped false joints to form suitable panels on the faces to approve design with compacting 2304
by vibrating and curing complete. Including plywood/steel formwork, centering (
excluding dewatering by means of pump) and including bailling out water and including
CM 1:3 curing complete.
a) Height upto 5 M. (With Concrete Mixer)
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise with fine agreegates of
required specifications ( VSI sand finely washed etc )
636 Bridge sub 17.48 BR Providing and laying in situ / ready mix M-25 cement concrete of trap /granite/quartzite/ MORT&H (5th One Cubic Meter 8246 1929
structure and gneiss metal for cast in citu R.C.C. solid piers,column etc . including provision of V Rev.) 1700, 2204,
Foundation shaped false joints to form suitable panels on the faces to approve design with compacting 2304
by vibrating and curing complete. Including plywood/steel formwork, centering (
excluding dewatering by means of pump) and including bailling out water and including
CM 1:3 curing complete.
a) Height upto 5 M. (With Concrete Mixer)
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise with fine agreegates of
required specifications ( VSI sand finely washed etc )
637 Bridge sub 17.49 BR Providing and laying in situ / ready mix M-30 cement concrete of trap /granite/quartzite/ MORT&H (5th One Cubic Meter 8487 1929
structure and gneiss metal for cast in citu R.C.C. solid piers,column etc . including provision of V Rev.) 1700, 2204,
Foundation shaped false joints to form suitable panels on the faces to approve design with compacting 2304
by vibrating and curing complete. Including plywood/steel formwork, centering (
excluding dewatering by means of pump) and including bailling out water and including
CM 1:3 curing complete.
a) Height upto 5 M. (With Concrete Mixer)
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
Page 137
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
638 Bridge sub 17.50 BR Providing and laying in situ / ready mix M-35 cement concrete of trap /granite/quartzite/ MORT&H (5th One Cubic Meter 8854 1929
structure and gneiss metal for cast in citu R.C.C. solid piers,column etc . including provision of V Rev.) 1700, 2204,
Foundation shaped false joints to form suitable panels on the faces to approve design with compacting 2304
by vibrating and curing complete. Including plywood/steel formwork, centering (
excluding dewatering by means of pump) and including bailling out water and including
CM 1:3 curing complete.
a) Height upto 5 M. (With Concrete Mixer)
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for every 2.50m rise with fine agreegates of
required specifications ( VSI sand finely washed etc )
639 Bridge sub 17.51 BR Providing trap/granite/quartzite/gneiss rubble filling over haunches and arches including MORT&H (5th One Cubic Meter 1165 145
structure and hand packing. Rev.) 1700, 1704
Foundation Spec. One Number: BR.34 Page One Number 146
640 Bridge sub 17.52 BR Providing and laying in situ / ready mix controlled M-20 cement concrete of of trap / MORT&H(5th One Cubic Meter 7913 1964
structure and granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and Rev.) 1700, 2205,
Foundation abutments including necessary sacffolding plywood/steel formwork, compacting by 2304
vibrating, finishing in CM 1:3 and curing etc complete ( Excluding reinforcement) With
reversible drum type mixer/ concrete batch mix plant (pan mixer) . with fine agreegates of
required specifications ( VSI sand finely washed etc )
641 Bridge sub 17.53 BR Providing and laying in situ / ready mix controlled M-25 cement concrete of of trap / MORT&H(5th One Cubic Meter 8783 1964
structure and granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and Rev.) 1700, 2205,
Foundation abutments including necessary sacffolding plywood/steel formwork, compacting by 2304
vibrating, finishing in CM 1:3 and curing etc complete ( Excluding reinforcement) With
reversible drum type mixer/ concrete batch mix plant (pan mixer) . with fine agreegates of
required specifications ( VSI sand finely washed etc )
642 Bridge sub 17.54 BR Providing and laying in situ / ready mix controlled M-30 cement concrete of of trap / MORT&H(5th One Cubic Meter 9039 1964
structure and granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and Rev.) 1700, 2205,
Foundation abutments including necessary sacffolding plywood/steel formwork, compacting by 2304
vibrating, finishing in CM 1:3 and curing etc complete ( Excluding reinforcement) With
reversible drum type mixer/ concrete batch mix plant (pan mixer) . with fine agreegates of
required specifications ( VSI sand finely washed etc )
Page 138
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
643 Bridge sub 17.55 BR Providing and laying in situ / ready mix controlled M-35 cement concrete of of trap / MORT&H(5th One Cubic Meter 9574 1964
structure and granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and Rev.) 1700, 2205,
Foundation abutments including necessary sacffolding plywood/steel formwork, compacting by 2304
vibrating, finishing in CM 1:3 and curing etc complete ( Excluding reinforcement) With
reversible drum type mixer/ concrete batch mix plant (pan mixer) . with fine agreegates of
required specifications ( VSI sand finely washed etc )
644 Bridge sub 17.56 BR Providing and placing Cage Unit, with 12 m Dia of each cage in the unit, for each support MORT&H (5th One Number 570219 27591
structure and of staging for 6 m well foundation to two lane bridge, embedded 0.50m below the bed and Rev.) 1814
Foundation raised 0.50m above HTL, comprising 25mm dia vertical HYSD bars/ ISMB Sections and
bamboos within, strirrups of 25mm and 12mm dia - HYSD bars, including boulder filling
with void filling and compaction, with reinforcement, Bolts, fabrication and placing cage
in position as per design and drawing complete. 1). For depth of water 5.0 M (Item shall
be included in Estimate with prior permission of SE, with due attention to site condition
and actual requirement for creek bridges. Depth of standing water shall be verified and
certified by EE for each span seperately, and accordinly provisions shall be made) For
intermidiate depth of water rate shall be derived by interpolation.
645 Bridge sub 17.57 BR Providing and placing Cage Unit, with 12 m Dia of each cage in the unit, for each support MORT&H (5th One Number 1589289 83710
structure and of staging for 6 m well foundation to two lane bridge, embedded 0.50m below the bed and Rev.) 1814
Foundation raised 0.50m above HTL, comprising 25mm dia vertical HYSD bars/ ISMB Sections and
bamboos within, strirrups of 25mm and 12mm dia - HYSD bars, including boulder filling
with void filling and compaction, with reinforcement, Bolts, fabrication and placing cage
in position as per design and drawing complete. 1). For depth of water 10.0 M (Item shall
be included in Estimate with prior permission of SE, with due attention to site condition
and actual requirement for creek bridges. Depth of standing water shall be verified and
certified by EE for each span seperately, and accordinly provisions shall be made) For
intermidiate depth of water rate shall be derived by interpolation.
646 Bridge Super 17.58 BR Providing and laying in situ / ready mix M-20 cement concrete of trap / granite / quartzite/ MORT&H (5th Cubic Meter 7050 1362
Structure gniess metal for reinforced cement concrete block below the bearing including necessary Rev.) 1700, 2205,
scaffolding, plywood/steel formwork, compaction by vibrating, finishing in CM 1:3 and 2304
curing complete (Excluding reinforcement) Using reversible drum type mixer/ concrete
batch mix plant (pan mixer) with fine agreegates of required specifications ( VSI sand
finely washed etc )
Page 139
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
647 Bridge Super 17.59 BR Providing and laying in situ / ready mix M-25 cement concrete of trap / granite / quartzite/ MORT&H (5th Cubic Meter 7263 1359
Structure gniess metal for reinforced cement concrete block below the bearing including necessary Rev.) 1700, 2205,
scaffolding, plywood/steel formwork, compaction by vibrating, finishing in CM 1:3 and 2304
curing complete (Excluding reinforcement) Using reversible drum type mixer/ concrete
batch mix plant (pan mixer) .
648 Bridge Super 17.60 BR Providing and laying in situ / ready mix M-30 cement concrete of trap / granite / quartzite/ MORT&H (5th Cubic Meter 7381 1362
Structure gniess metal for reinforced cement concrete block below the bearing including necessary Rev.) 1700, 2205,
scaffolding, plywood/steel formwork, compaction by vibrating, finishing in CM 1:3 and 2304
curing complete (Excluding reinforcement)
Using reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine
agreegates of required specifications ( VSI sand finely washed etc )
649 Bridge Super 17.61 BR Providing and laying in situ / ready mix M-35 cement concrete of trap / granite / quartzite/ MORT&H (5th Cubic Meter 7853 1362
Structure gniess metal for reinforced cement concrete block below the bearing including necessary Rev.) 1700, 2205,
scaffolding, plywood/steel formwork, compaction by vibrating, finishing in CM 1:3 and 2304
curing complete (Excluding reinforcement)
Using reversible drum type mixer/ concrete batch mix plant (pan mixer) .
650 Bridge Super 17.62 BR Providing and laying in situ / ready mix M-40 cement concrete of trap / granite / quartzite/ MORT&H (5th Cubic Meter 7895 1362
Structure gniess metal for reinforced cement concrete block below the bearing including necessary Rev.) 1700, 2205,
scaffolding, plywood/steel formwork, compaction by vibrating, finishing in CM 1:3 and 2304
curing complete (Excluding reinforcement)
Using reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine
agreegates of required specifications ( VSI sand finely washed etc )
651 Bridge Super 17.63 BR Providing and laying in situ / ready mix M-45 cement concrete of trap / granite / quartzite/ MORT&H (5th Cubic Meter 8084 1362
Structure gniess metal for reinforced cement concrete block below the bearing including necessary Rev.) 1700, 2205,
scaffolding, plywood/steel formwork, compaction by vibrating, finishing in CM 1:3 and 2304
curing complete (Excluding reinforcement)
Using reversible drum type mixer/ concrete batch mix plant (pan mixer) .
652 Bridge Super 17.64 BR Providing and laying in situ / ready mix M-50 cement concrete of trap / granite / quartzite/ MORT&H (5th Cubic Meter 8611 1362
Structure gniess metal for reinforced cement concrete block below the bearing including necessary Rev.) 1700, 2205,
scaffolding, plywood/steel formwork, compaction by vibrating, finishing in CM 1:3 and 2304
curing complete (Excluding reinforcement) Using reversible drum type mixer/ concrete
batch mix plant (pan mixer) with fine agreegates of required specifications ( VSI sand
finely washed etc )
653 Bridge Super 17.65 BR Providing and cutting bending, hooking, laying in position and tying HCRM/ CRS for Specifications : Metric Tonne 91565 8367
Structure reinforcement as per detailed drawings for R.C.C. work Note : Where item no 34(c) MORT&H (5th
considered in estimate, Anti Corrosive Treatment Shall not be considered additionaly. Rev.) 1600
HCRM : High Corrosion Resistance Marine. CRS : Corrosion Resistance Steel.
Page 140
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
654 Bridge : Well 17.66 BR Chipping and dressing of the R.C.C. piles upto 0.60 meter including cleaning Specifications : One Number 683 683
Foundation reinforcement and removal of dismantled materials upto a distance of 50 meter beyond the MORT&H (5th
building area etc. for providing pile caps. Rev.) 2604
655 Bored Pile, Well 17.67 Supply of all types of Structural steel conforming to Fe 410 B of IS 2062, Fabrication, One Metric 107164 26993
Foundation, sub assembling, erection / slewing/ end launching of Steel girders ( NOT requiring traffic Tonne
& Super block) upto 45.7 m span on sub structure incl. provision of trolley refuges, incl. loading,
Structure unloading, lift and taxes complete, assembly of girders on drift/ bolts, field riveting/
welding, assembling of temporary support for side slewing, raising of girders to the bed
block level, providing sliding arrangements (Material at site, fabrication at site, erection /
launching etc only) PLATE GIRDER / Semi Through Girder
656 Bored Pile, Well 17.68 Extra for working under running traffic / traffic block conditions for above Items. One Metric 21433 0
Foundation, sub Tonne
& Super
Structure
657 Bored Pile, Well 17.69 Metalizing of steel work of girder with grit blasting as per IRS - B1-2011 following by One Square 177 50
Foundation, sub one coat of etch primer (as per IS;5666) one coat of Zinc Chrome primer (as per IS:104) Metre
& Super and two coats of aluminium paint (as per IS:2339) with all labour, tools,plants and
Structure materials.
658 Bored Pile, Well 17.70 Providing sacrificial shuttering for deck slab made up with galvanised Cold Rolled Cold One Metric 66368 3214
Foundation, sub Annealed (CRCA) steel of 310 MPA Grade with all Contractor's material, labour, erection Tonne
& Super fixing, welding etc.
Structure (Decking Sheet )
659 Bored Pile, Well 17.71 Providing and removing barricading with the help of portable fencing along the running One Running 587 36
Foundation, sub track where the work is to be done in close vicinity of the track. Fencing shall consist of Metre
& Super self supporting steel angles of size 50 x50x6mm, 1.5m long provided with hooks etc. and
Structure embedded in CC 1:2:4 block of size 0.23x0.23x0.23M placed at c/c distance of 2.0 M
along the track. 12 mm dia rods in three horizontal layers tack welded with the angle posts
including providing Retro-reflective tapes in Horizontal & vertical direction. Note :
Released material will be the property of the contractor after the completion of work. Cost
of cement to be paid separately.
Page 141
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
660 Bored Pile, Well 17.72 Load testing of one or more spans of bridge as selected by the Engineer as per approved Per Test 139423 101228
Foundation, sub load test procedure following relevant IS/IRC / Railway codes with contractor's labour,
& Super deflection measuring instruments, loading materials, recording and analyzing the load
Structure testing results including all leads and lifts etc. completeas required. The rates are all
inclusive and will be paid after load test is finished and girder is cleared of the kentledges/
loading materials etc. The load shall be 1.25 times the stipulated design load based on
Design load & not span ( for Span design load upto 100 MT.)
661 Bored Pile, Well 17.73 Load testing of one or more spans of bridge as selected by the Engineer as per approved Per Test 138161 101228
Foundation, sub load test procedure following relevant IS/IRC / Railway codes with contractor's labour,
& Super deflection measuring instruments, loading materials, recording and analyzing the load
Structure testing results including all leads and lifts etc. completeas required. The rates are all
inclusive and will be paid after load test is finished and girder is cleared of the kentledges/
loading materials etc. The load shall be 1.25 times the stipulated design load based on
Design load & not span ( Extra for every increase of 100.00mt. or part there for in the
span load capacity up to 800.00 mt.)
Page 142
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
663 Arch Bridge 18.02 Providing factory made hydraulically pressed mechanically vibrated and compacted As directed by One Number 3823 249
Precast Ready Mix M-40 controlled cement concrete of trap /granite/quartzite/gneiss Engineer-in Charge
metal Blocks of 520 mm top & 460 mm bottomX1000mm length and 400mm thick
having various cross section areas for assembly of Arch Strip, including lifting hooks,
including machined surfaced laser cut, trapezoidal steel moulds. As specified and as per IS
456:2000 including cost of all materials, preparation of casting bed, manufacturing,
curing, removing from steel moulds by using crane or required machinery and stacking of
blocks for preparation of arch strip of various lengths, including lead of all materials up to
RMC plant, with fully automatic micro processor based PLC with SCADA enabaled
concrete Batch Mix Plant ( PAN Mixer )with Crushed sand VSI Grade. etc. complete. as
directed by the Engineer in charge.
Page 143
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
664 Arch Bridge 18.03 Providing factory made hydraulically pressed mechanically vibrated and compacted As directed by One Number 3944 249
Precast Ready Mix M-50 controlled cement concrete of trap /granite/quartzite/gneiss Engineer-in Charge
metal Blocks of 520 mm top & 460 mm bottomX1000mm length and 400mm thick
having various cross section areas for assembly of Arch Strip, including lifting hooks,
including machined surfaced laser cut, trapezoidal steel moulds. As specified and as per IS
456:2000 including cost of all materials, preparation of casting bed, manufacturing,
curing, removing from steel moulds by using crane or required machinery and stacking of
blocks for preparation of arch strip of various lengths, including lead of all materials up to
RMC plant, with fully automatic micro processor based PLC with SCADA enabaled
concrete Batch Mix Plant ( PAN Mixer )with Crushed sand VSI Grade. etc. complete. as
directed by the Engineer in charge.
665 Arch Bridge 18.04 Providing factory made hydraulically pressed mechanically vibrated and compacted As directed by One Number 4940 273
Precast Ready Mix M-30 controlled cement concrete of trap /granite/quartzite/gneiss Engineer-in Charge
metal Socket Blocks of 520 mm top & 460 mm bottom x1000mm length and 300mm
thick having various cross section areas for assembly of Arch Strip, including lifting
hooks, including machined surfaced laser cut, trapezoidal steel moulds. As specified and
as per IS 456:2000 including cost of all materials, preparation of casting bed,
manufacturing, curing, removing from steel moulds by using crane or required machinery
and stacking of blocks for preparation of arch strip of various lengths, including lead of all
materials up to RMC plant, with fully automatic micro processor based PLC with SCADA
enabaled concrete Batch Mix Plant ( PAN Mixer )with Crushed sand VSI Grade. etc.
complete. as directed by the Engineer in charge.
666 Arch Bridge 18.05 Providing factory made hydraulically pressed mechanically vibrated and compacted As directed by One Number 5047 273
Precast Ready Mix M-40 controlled cement concrete of trap /granite/quartzite/gneiss Engineer-in Charge
metal Socket Blocks of 520 mm top & 460 mm bottom x1000mm length and 300mm
thick having various cross section areas for assembly of Arch Strip, including lifting
hooks, including machined surfaced laser cut, trapezoidal steel moulds. As specified and
as per IS 456:2000 including cost of all materials, preparation of casting bed,
manufacturing, curing, removing from steel moulds by using crane or required machinery
and stacking of blocks for preparation of arch strip of various lengths, including lead of all
materials up to RMC plant, with fully automatic micro processor based PLC with SCADA
enabaled concrete Batch Mix Plant ( PAN Mixer )with Crushed sand VSI Grade. etc.
complete. as directed by the Engineer in charge.
Page 144
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
667 Arch Bridge 18.06 Providing factory made hydraulically pressed mechanically vibrated and compacted As directed by One Number 5128 273
Precast Ready Mix M-50 controlled cement concrete of trap /granite/quartzite/gneiss Engineer-in Charge
metal Socket Blocks of 520 mm top & 460 mm bottom x1000mm length and 300mm
thick having various cross section areas for assembly of Arch Strip, including lifting
hooks, including machined surfaced laser cut, trapezoidal steel moulds. As specified and
as per IS 456:2000 including cost of all materials, preparation of casting bed,
manufacturing, curing, removing from steel moulds by using crane or required machinery
and stacking of blocks for preparation of arch strip of various lengths, including lead of all
materials up to RMC plant, with fully automatic micro processor based PLC with SCADA
enabaled concrete Batch Mix Plant ( PAN Mixer )with Crushed sand VSI Grade. etc.
complete. as directed by the Engineer in charge.
668 Arch Bridge 18.07 Providing and laying M-50 grade Ready Mix cement concrete of 60mm thickness, As directed by One Square 5131 351
mechanically vibrated and compacted above linearly and parallelly arranged precast blocks Engineer-in Charge Metre
placed on ISMC 100 base to form a layer of screed concrete over unit arch strip. Including
HYFLEX steel wire rope – 6 X 36, steel core fixed with aluminum ferrules of required
size and shape in individual block, for connecting blocks in unit arch strip. Including
crimping of each ferule with wire rope using embedded steel bar of 8mm diameter and
150mm in length. Including 10mm dia steel roads for fixing wire ropes. Including Z-plate
acting as form work and steel separation plate of 10mm thickness over individual joint. As
specified and as per IS 456:2000 including cost of all materials, preparation of level bed,
curing, , including lead of all materials up to RMC plant / casting yard, etc. complete. as
directed by the Engineer in charge.
669 Arch Bridge 18.08 Providing Lifting, transportation and placing activities of precast arch units and sockets As directed by One Metric 3678 304
from casting yard / RMC plant to construction site including all necessary lifting Engineer-in Charge Tonne
arrangements in hydraulic telescopic cranes of appropriate lifting capacity, transportation
on flat bed trailer of required length, including lifting slings with D-shackle, pulling
ratchets, including ISMC 300 steel supporting cross beam, two One Numbers of P type 10
ton capacity chain pully , including temporary supports for lifting and transporting on
trailers, including construction of leveling platform crane and trailer, including scaffolding
and platform at pier / abutment top level, including necessary all manpower., etc.
complete., as directed by Engineer In Charge.
Page 145
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
673 Bridge 19.04 BR Providing and applying epoxy paint primer with middle coat and top coat to As directed by One Square 695 305
Maintenance superstructure including scaffolding etc complete. Engineer in Charge Metre
New Item
674 Bridge Repair 19.05 BR Making and working inside steel cages for crocodile including handling the same with As directed by One Number 694858 3323
New Item suitable hanging arrangements Engineer in Charge
675 Bridge Repair 19.06 BR Underwater Inspection : Underwater inspection cum video graph shall be arranged by As directed by One Number 164185 41190
New Item divers to inspect from the cavity of well foundation and mapping of the cavity. A) Before Engineer in Charge
rectification work
676 Bridge Repair 19.07 BR Underwater Inspection : Underwater inspection cum video graph shall be arranged by As directed by One Number 85276 16476
New Item divers to inspect from the cavity of well foundation and mapping of the cavityB) After Engineer in Charge
rectification work
677 Bridge Repair 19.08 BR Underwater Surface Preparation: Crack surface shall be cleaned using underwater jet to As directed by One Running 856 687
New Item remove the fungal growth and other foreign materials to enable a clean and visible surface. Engineer in Charge Meter
The item includes the cost of hire charges of all equipment, diving equipment and all
charges for divers etc., complete.
Page 146
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
678 Bridge Repair 19.09 BR Underwater Crack Groove Cutting: Groove shall be cut using under water concrete cutting As directed by One Running 2567 2060
New Item machine of size of 50 mm wide and 75 mm deep on each side of the crack to form as "V" Engineer in Charge Meter
groove all along the crack to fill the underwater polyester resin/ Epoxy putty (horizontal
and vertical cracks). After the groove cutting, the concrete shall be removed from the
groove using the pneumatic concrete chipping machine to form "V" groove. The item
includes the cost of hire charges of pneumatic equipment, air compressor and all charges
for divers with accessories etc., complete.
679 Bridge Repair 19.10 BR Underwater Crack Sealing/Filling using underwater Epoxy mortar : Under water Epoxy As directed by One Kilogramme 2292 1373
New Item putty shall be mixed using the slow speed heavy duty mixing machine to obtain a uniform Engineer in Charge
mix. The mixed materials shall be placed all along the prepared "V" groove and finished
smoothly using the putty blade/ trowel within 30 minutes by using the divers. The finished
surface shall be allowed for curing minimum of 24 hours to attain the strength. The item
includes the cost all materials, hire charges for all machineries and all charges for divers
with accessories etc., complete. Make - Material of reputed manufacturer
680 Bridge Repair 19.11 BR Underwater P/Fixing the Nozzle for high pressure underwater epoxy grout: Drilling hole As directed by One Number 1089 589
New Item of 12/ 18 mm dia to a depth of minimum 100 mm across the crack to an angle of 45° @ Engineer in Charge
500 mm C/C, using pneumatic drilling machine without disturbing the epoxy mortar filled
on the "V" groove with the help of divers. The nozzle shall be inserted in the drilled hole
and fixed using the under water polyester resin grout and allowed for curing for final set.
The item includes the cost of all materials, hire charges for all machineries and all charges
for divers with accessories etc., complete.
681 Bridge Repair 19.12 BR Underwater for high pressure underwater epoxy grout: Grouting with Water Insensitive As directed by Kilogramme 2588 1373
New Item Underwater Epoxy Grout Base and hardener shall be mixed with using hand held heavy Engineer in Charge
duty electrically operated mixing machine until uniform mix is obtained. The mixed
material shall be poured in to the high pressure grouting machine container and grouted
through the non-return nozzle already fixed on cracks. The grouting shall be done from
the bottom of crack until grout rejects of all other grouting ports. The grouting shall be
carried out with the help of divers and underwater communication device to know the
conditions. The item includes the cost of all materials, hire charges for all machineries and
all charges for divers with accessories etc., complete.
682 Bridge Repair 19.13 BR Providing fixing of dowel rod of 16 mm dia in the river bed for 400 mm depth @ 1000 As directed by One Number 4679 2746
New Item mm c/c in single layer and grouting with underwater epoxy grout includes the cost of hire Engineer in Charge
charges of all machineries, barge, boat, cost of all tools and all labour charges etc.,
complete.
Page 147
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
683 Bridge Repair 19.14 BR Providing fixing of shear links of 12 mm dia in the periphery of the well wall for 100 mm As directed by One Number 888 650
New Item mm depth @ 500 mm c/c bothway and grouting with underwater epoxy grout includes Engineer in Charge
the cost of hire charges of all machineries, barge, boat, cost of all tools and all labour
charges etc., complete.
684 Bridge Repair 19.15 BR Providing Filling of concrete encasing of grade M35 around the periphery of the pier of As directed by One Cubic Meter 96335 9968
New Item 500 mm thick upto 3.5 m from the river bed level including Scarifical leakproof MS Engineer in Charge
shuttering includes the cost of hire charges of all machineries, barge, boat, cost of all tools
and all labour charges etc., complete.
685 Bridge Repair 19.16 BR Surface Preparation: Crack surface shall be cleaned using underwater jet to remove the As directed by One Running 766 615
New Item fungal growth and other foreign materials to enable a clean and visible surface. The item Engineer in Charge Meter
includes the cost of hire charges of all equipment, diving equipment and all charges for
divers etc., complete.
686 Bridge Repair 19.17 BR Crack Groove Cutting: Groove shall be cut using hand held electrically operated concrete As directed by One Running 893 615
New Item cutting machine of size of 50 mm wide and 75 mm deep on each side of the crack to form Engineer in Charge Meter
as "V" groove all along the crack to fill the polyester resin/ Epoxy putty (horizontal and
vertical cracks). After the groove cutting, the concrete shall be removed from the groove
using the pneumatic concrete chipping machine to form "V" groove. The item includes the
cost of hire charges for all machineries, tools and barges and all labour charges etc.,
complete.
687 Bridge Repair 19.18 BR Crack Sealing/Filling using epoxy mortar: Base and hardener of the high strength repair As directed by One Kilogram 1341 615
New Item mortar . Epoxy putty shall be mixed using the slow speed heavy duty mixing machine to Engineer in Charge
obtain a uniform mix. The mixed materials shall be placed all along the prepared "V"
groove and finished smoothly using the putty blade/ trowel within 30 minutes by using the
divers. The finished surface shall be allowed for curing minimum of 24 hours to attain the
strength. The item includes the cost of hire charges of all equipment , tools and plants and
all labour charges etc., complete.
688 Bridge Repair 19.19 BR Providing and Fixing of 12 mm nozzle in the crack portion @ 500 c/c including material, As directed by One Number 335 190
New Item labour complete in all respect. Engineer in Charge
689 Bridge Repair 19.20 BR Providing Repairing of honeycombs and minor damages with Polymer Modified Morter As directed by One Kilogram 164 88
New Item including material,labour complete in all respect. Engineer in Charge
Page 148
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
690 Bridge Repair 19.21 BR Application of Protective coating Supply and application of Siliane/ Siloxane primer. As directed by One Square 1343 615
New Item Primer shall be applied by brush/ sprayed over the prepared concrete surface at 0.30 to Engineer in Charge Meter
0.40 litter/ One Square Metre by using the airless nozzle gun. After applying primer coat,
Single component aliphatic acrylate UV resistant protective cum decorative coat
DEKilogramUARD S or similar shall be applied over the primed surface using airless
nozzle gun in two coats and each coat shall b e 150 microns DFT. Including cost of all
materials, cost of hire charges of tools and plants and all labour charges etc. complete.
691 Bridge Repair 19.22 BR Providing Boulder to the cavity area of 75-200mm in size includes the cost of hire As directed by One Cubic Meter 4587 2603
New Item charges of all machineries, barge, boat, cost of all tools and all labour charges etc., Engineer in Charge
complete.
692 Bridge Repair 19.23 BR Providing filling of Micro-concrete and 10 mm aggreagate ( 1:1) including scarificial As directed by One Cubic Meter 115871 24714
New Item leakproof MS shuttering includes the cost of hire charges of all machineries, barge, boat, Engineer in Charge
cost of all tools and all labour charges etc., complete.
693 Bridge Repair 19.24 BR Providing Grounting of nozzles with Low Viscosity Epoxy grout including material, As directed by One Kilogram 1659 615
New Item labour complete in all respect. Engineer in Charge
694 Bridge Repair 19.25 BR Drilling 32 mm dia hole and upto depth of 400 mm and grounting with epoxy resin of As directed by One Number 4831 2031
New Item reinforcement steel of 25 mm dia of all manpower and equipments complete in all respect Engineer in Charge
695 Bridge Repair 19.26 BR Re-casting of bracket with micro-concrete and 10 mm agrregate ( 1:1) with leakproof As directed by Cubic Meter 96116 15375
New Item shuttering all manpower and equipments complete in all respect Engineer in Charge
696 Bridge Repair 19.27 BR P/fixing of carbon 100 mm x 1.4 mm carbon laminate with adhesive including of all As directed by Running Meter 6717 1845
New Item manpower and equipments complete in all respect Engineer in Charge
697 Bridge Repair 19.28 BR P/Applying prestressing to the laminate with hydraulic system to the required force as per As directed by Running Meter 9728 2592
New Item approved design with all manpower and equipments complete in all respect Engineer in Charge
698 Bridge Repair 19.29 BR P/Fixing of carbon fiber sheet of 430 GSM with adhesive including of hanging scofolding As directed by One Square 8839 1866
New Item of all manpower and equipments complete in all respect Engineer in Charge Meter
699 Bridge Repair 19.30 BR Providing and fixing carbon fiber anchor including drilling hole in the base concrete As directed by One Number 536 308
New Item fixing the anchor using epoxy 50X55 system spreading the anchor fibers in star pattern Engineer in Charge
including appication of saturant etc. complete.
700 Bridge Repair 19.31 BR Anticorrosive treatment to expose reinforcement in two coats with time interval of As directed by One Square 567 308
New Item minimum 4 hours between each coat. The application shall be done by brush. Engineer in Charge Meter
701 Bridge Repair 19.32 BR Carry out application of "Bi-polar migratory corrosion inhibitor" on concrete surface. This As directed by One Square 743 492
New Item inhibitor has migratory kind of property which permits the material to migrate to a virtual Engineer in Charge Meter
extent of 100mm, through pores of concrete,inhibiting the corrosion etc complete.
Page 149
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
702 Bridge Repair 19.33 BR Providing & applying structural grade epoxy approved bond coat prior to application of As directed by One Square 738 290
New Item any type of mortar confirming to IS codes or equivalent to ensure bond between old Engineer in Charge Meter
concrete & new concrete by brush application etc complete.
703 Bridge Repair 19.34 BR Providing & applying 2 coats of compatible Polyurethane on epoxy fiber wrapped surface As directed by One Square 789 492
New Item with brush /spray application etc complete. Engineer in Charge Meter
704 Bridge Repair 19.35 BR Providing & applying 20mm thick single coat Epi-bond plaster on FRP wrap surface & As directed by One Square 1174 463
New Item other area etc complete. Engineer in Charge Meter
705 Bridge Repair 19.36 BR Providing 10 mm dia and 150 mm long tie rod stud through corrugated GI decking sheet As directed by One Number 68 17
New Item and welding to the deck slab reinforcement for holding decking sheets in place etc Engineer in Charge
complete.
706 Bridge Repair 19.37 BR Dismantling of concrete pedestal up to required height including cutting reinforcement by As directed by One Number 19425 2555
New Item using of concrete saw, complete including all fixing arrangements of the machines, water Engineer in Charge
for cooling, diamond saw, other accessories, safety of workers and removal and disposal
of debris as per instruction of site in- charge etc complte
707 Bridge Repair 19.38 BR Dismantling of concrete pedestal up to required height using electrical breakers including As directed by One Number 5122 2855
New Item cutting reinforcement by gas cutters, other accessories, safety of workers and removal and Engineer in Charge
disposal of debris as per instruction of site in- charge
708 Bridge Repair 19.39 BR Providing and applying anticorrosive treatment with epoxy zinc rich primer to the exposed As directed by One Square 764 518
New Item reinforcement after cleaning either with wire brush or sand blasting including all tools, Engineer in Charge Meter
tackels, machinery etc. complete.
709 Bridge Repair 19.40 BR Stone work Joint Filling :Racking of joints in Course rubble masonry (CRM). Sealing of As directed by One Running 1342 337
New Item the joints with epoxy mortar confirming to Section 2800 of technical specification, Engineer in Charge Meter
including pointing, finishing ect., complete.( 25mm x 25mm )
710 Bridge Repair 19.41 BR Dismantelling existing damaged Drainage Water Spout and providing 100mm diameter As directed by One Number 3399 1470
New Item GI water spouts as per detailed drawings in RCC slab and wearing surface/kerb etc. Engineer in Charge
complete
711 Bridge Repair 19.42 BR Providing and fixing additional reinforcement to replace the corroded diameter of As directed by One Kilogram 89 8
New Item existing steel for strengthening purpose. Engineer in Charge
712 Bridge Repair 19.43 BR Raising of scafolding to reach the entire surface area of bridge. upto10 m height above As directed by One Square 715 155
New Item ground level, made with MS tube, horizontal and vertical tub joint with cup and lock Engineer in Charge Meter
system with MS tubes, challies, MS clamp and maintaing it in a serveciabl econdition for
execution work of cleaning and/ or pointing and or/applying protection coating and/
inspection of work at required locations and removing it there after etc complete. (Item
includes making of temporary support for scaffolding, cost of scaffolding, labour,
material, safety devices,etc.,all complete)
Page 150
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
713 Bridge Repair 19.44 BR Structural Repairs to damaged concrete surface with polymer concrete /mortar with AC- As directed by One Square 4119 728
New Item ACRYLATE-REPAIR and AC-BOND-AID as detailed in the method statement including Engineer in Charge Meter
material, labour, etc., all complete as directed by engineer. (Repairs to deck slab, piers,
abutment, girders and other locations up to 40 mm thickness).
714 Bridge Repair 19.45 BR Core Strengthening of Concrete Structure: Strengthening of concrete structure including As directed by One Number 4274 1035
New Item grouting of concrete with epoxy, AC-DUR-IE, as detailed in the method statement. Item Engineer in Charge
includes cost of material, labour, equipment’s and also removal of nozzles and finishing of
the surface after the work.
715 Bridge Repair 19.46 BR Erecting supports for placing the jacks, props and necessary steel structure. Placing of the As directed by One Number 34487 4615
New Item jacks below bearings. (as per the design of lifting scheme). The lifting scheme shall be Engineer in Charge
put up to the approval of consultants after approval of the work shall be done by
competent authority. Cost of the bearings, design of erection system, jacks, platforms,
safety devices, etc., complete including releasing of bridge span on the new bearings.
(Bearing replacement from 50 to 100 One Numbers per bridge)
716 Bridge Repair 19.47 BR 51 A Providing and flooding high molecular weight lowest viscous thermoset Monomer BR.51(A)/Page One Square 2132 314
New Item MONOPOL (<10 CPs viscocity) at the dosage of 2 Kg/sqm on the deck bridge slab for No.144/I.S. Meter
rendering intrinsic impermeability, improving cohesion and sealing micropores in deck 456(1978)
bridge slab. The procedure includes cleaning the slab with wire brushing and air blowing,
flooding the slab at the dosage of 2 Kgs/sqm over cleaned surface and brooming it further
to allow fullest penetration and complete receival inside the concrete. The material shall
have following properties: Material-Low viscosity high molecular weight thermosett resin
grout, Viscosity-Less than 10 centipoise per second, Mechanical strength properties of the
material (after 7 days) Compressive strength (ASTM-D-695-96)Min 60 MPa, Tensile
strength (ASTM-D-638-95)Min. 18 MPa, Flexure (ASTM-D-790-96)Min. 30 MPa.
717 Bridge Repair 19.48 BR Providing and laying low viscosity, abrasion resistant, insitu UV resistant sealer Monopol- As directed by One Running 270 160
New Item 160 into all type of concrete pavement cracks wherever required in culverts, bridges and Engineer in charge Metre
pavements as per manufacturer’s specifications and guidelines etc. complete including
chipping the surface and making groove into cracks 5mm x 10mm and cleaning the
surface and pouring the material into cracks etc. complete.
718 Bridge Repair 19.49 BR 51 E Providing and laying low viscosity, abrasion resistant, insitu UV resistant sealer Monopol- BR.51(E)/Page One Square 7844 2426
New Item 160 into all type of wearing sealer coat & pot hole filler wherever required in culverts, No.147/I.S. Meter
bridges and pavements as per manufacturer’s specifications and guidelines including 456(2000)
removing loose concrete, cleaning the surface, mixing and pouring the merterial about
20mm thick etc complete.
Page 151
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
719 Bridge Repair 19.50 BR Providing and applying interpenertrating Polymer network concrete coating system for As directed by One Square 660 278
New Item bridges, bridge decks, girders, piers, RCC strectures for protections against chemical and Engineer in charge Metre
weather resistance complete comprising of one Primer Coat of epoxy phenolic
interpenetrating polymer, two middle coats of IPNet Middle Coat and a Top Coat of IPNet
PU (Aliphatic PU) to a total thickness of 300±15 microns over a thoroughly prepared
surface with an interval of 3 hours to 78 hours between the coats. The application shall be
in red and white colour and shall conform to the following: a. Tensile strength: Minimum
tensile strength of the coating must be 15 N/mm 2 and it should be determined as per
ASTM D-2370-73 b. Elongation: Minimum elongation of the coating must be 15% and it
should be determined as per ASTM D-2370-73 c. Specific permeability: The maximum
value must be 0.15 mg/cm 2 /mm/24hr and it should be determined as per ASTM D-1653-
74 d. Adhesion with concrete: The minimum adhesion with concrete by pullout method
must be 2.5N/mm 2 and it should be determined as per BS-3900-E-10-79 e. Impedence (In
3.0 % NaCl Solution) Initial 9 x 10 10 ohms minimum After 30 days 1 x 10 8 ohms
minimum f. QUV Condensation test: Minimum 500 hrsas per ASTM-G-154
Page 152
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
721 Excavation 21.02 BDA 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, Bd.A.1 Page One One Cubic Metre 207 116
including removing the excavated material up to a distance of 50 m. beyond the Number 259
building area and stacking and spreading as directed, dewatering, preparing the bed
for the foundation and necessary back filling, ramming, watering including shoring and
strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
722 Excavation 21.03 BDA 1 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, Bd.A.1 Page One One Cubic Metre 314 314
including removing the excavated material upto a distance of 50 metres beyond the Number 259
building area and stacking and spreading as directed, dewatering, preparing the bed
for the foundation and necessary back filling, ramming, watering including shoring and
strutting etc. complete. (Lift from 1.5m to 3.0m) By Manual Means
723 Excavation 21.04 BDA 1 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, Bd.A.1 Page One One Cubic Metre 258 144
including removing the excavated material upto a distance of 50 metres beyond the Number 259
building area and stacking and spreading as directed, dewatering, preparing the bed
for the foundation and necessary back filling, ramming, watering including shoring and
strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means
724 Excavation 21.05 BDA 2 Excavation for foundation in hard murum including removing the excavated material Bd.A.1 Page No.259 One Cubic Metre 365 365
upto distance of 50 metres beyond the building area and stacking and spreading as
directed, dewatering, preparing the bed for the foundation and necessary back
filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50
m) By Manual Means
725 Excavation 21.06 BDA 2 Excavation for foundation in hard murum including removing the excavated material Bd.A.2 Page One One Cubic Metre 227 127
upto distance of 50 metres beyond the building area and stacking and spreading as Number 259
directed, dewatering, preparing the bed for the foundation and necessary back
filling, ramming, watering including shoring and strutting etc. complete. (Lift upto
1.50 m) By Mechanical Means
Page 153
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
726 Excavation 21.07 BDA 2 Excavation for foundation in hard murum including removing the excavated material upto Bd.A.1 Page No.259 One Cubic Metre 414 414
a distance of 50 metres beyond the building area and stacking and spreading as
directed, dewatering, preparing the bed for the foundation and necessary back
filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5
to 3.0m) By Manual Means
727 Excavation 21.08 BDA 2 Excavation for foundation in Hard murum including removing the excavated material upto Bd.A.2 Page One One Cubic Metre 284 159
a distance of 50 metres beyond the building area and stacking and spreading as Number 259
directed, dewatering, preparing the bed for the foundation and necessary back
filling, ramming, watering including shoring and strutting etc. complete. (Lift
from 1.5 to 3.0m.) By Mechanical Means
728 Excavation 21.10 BDA 3 Excavation for foundation in hard murum and boulders including removing the Bd.A.3 Page One One Cubic Metre 252 140
excavated material up to a distance 50 metres, beyond the building area and stacking and Number 259
spreading as directed, dewatering, preparing the bed for the foundation and
necessary back filling, ramming, watering including shoring and strutting etc.
complete. (Lift upto 1.5m.) By Mechanical Means
729 Excavation 21.12 BDA 3 Excavation for foundation in Hard murum and boulders including removing the Bd.A.3 Page One One Cubic Metre 312 173
excavated material upto a distance of 50 metres, beyond the building area and stacking Number 259
and spreading as directed, dewatering, preparing the bed for the foundation and
necessary back filling, ramming, watering including shoring and strutting etc. complete.
(Lift from 1.5 m to 3.0 m.) By Mechanical Means
730 Excavation 21.14 BDA 4 Excavation for foundation in Soft rock and old cement or lime masonry foundations Bd.A.4 Page One One Cubic Metre 429 288
including removing the excavated material upto a distance of 50 metres beyond the Number 259
building area and stacking as directed, including dewatering, preparing the bed for the
foundation and necessary back filling with available earth /murum, ramming, watering
including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means
731 Excavation 21.16 BDA 4 Excavation for foundation in Soft rock and old cement or lime masonry foundations Bd.A.4 Page One One Cubic Metre 524 356
including removing the excavated material upto a distance of 50 metres beyond the Number 259
building area and stacking as directed, including dewatering, preparing the bed for the
foundation and necessary back filling with available earth/murum, ramming ,watering
including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical
Means
Page 154
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
732 Excavation 21.17 BDA 5 Excavation for foundation in Hard rock by blasting including trimming and leveling the Bd.A.5 Page One One Cubic Metre 869 451
bed by chiseling where necessary and removing the excavated material and stacking Number 259
it in measurable heaps within a distance of 50 metres from the building area including
dewatering and back filling with available earth/murum, watering, ramming, etc.
complete. (Lift upto 1.5m) By Mechanical Means
733 Excavation 21.18 BDA 5 Excavation for foundation in Hard-rock by blasting including trimming and leveling the Bd.A.5 Page One One Cubic Metre 1033 559
bed by chiselling where necessary and removing the excavated material and Number 259
stacking it in measurable heaps within a distance of 50 metres from the building area
including dewatering and back filling with available earth/murum watering, ramming etc.
complete. (Lift from 1.5m To 3.0 m) By Mechanical Means
734 Excavation 21.19 BDA 5 B1 Excavation for foundation in Hard-rock by controlled blasting including trimming Bd.A.5 Page One One Cubic Metre 1322 465
and leveling the bed by chiselling where necessary and removing the excavated Number 259
material and stacking it in measurable heaps within a distance of 50 metres. from
the building area including dewatering and back filling with available earth soil /murum
watering, ramming etc. complete. (Lift upto 1.5m) By Mechanical Means
735 Excavation 21.20 BDA 6 Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. Bd.A.6 Page One One Cubic Metre 1307 889
including trimming and levelling the bed, removing the excavated material upto a distance Number 260
of 50 metres beyond the building area stacking as directed, dewatering and back
filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m).
By Mechanical Means
736 Excavation 21.21 BDA 7 Excavation for foundation in laterite rock (soft or hard) including trimming and levelling Bd.A.7, Page One One Cubic Metre 1465 889
the bed for the foundation, removing the excavated material up to a distance of 50 metres Number 260
beyond the building area, stacking as directed, dewatering and back filling with
available murum, watering, ramming etc. complete. (Lift upto 1.5 m.) By Mechanical
Means
737 Excavation 21.22 BDW Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by As directed by One Square 107 6
treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion Engineer in charge. Metre
concentrate of 1.0 percent of chlorophyrifos per square meter of surface area
covering 10 years guarantee on bond paper.
738 Excavation 21.23 BDW Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment As directed by One Square 112 6
by treating the backfill in immediate contact with foundation at the rate of 5 litres of Engineer in charge. Metre
emulsion concentrate of 1.0 percent of clorophyrifos per One Square Metre of vertical
surface area covering 10 years guarantee on bond paper.
Page 155
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
739 Excavation 21.24 BDW Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the As directed by One Square 108 8
top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 Engineer in charge. Metre
percent of clorophyrifos per One Square Metre of surface area covering ten years
guarantee on bond paper.
740 Excavation 21.25 BDW Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along As directed by One Square 176 25
the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 Engineer in charge. Metre
cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of
aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with
proper filling and covering 10 years guarantee on bond paper.
741 Excavation 21.26 BDW Providing antitermite treatment to the wooden frames of doors/windows of the As directed by One Number 74 10
existing building as per I.S. 6313 (Part-III) by drilling 6mm dia. holes at four corners on Engineer in charge.
one side and four corners on other side at a downward angle of about 45 degree at the
junction of wood work and masonary and injecting 150 ml. of chlorodane 5% W.C. and
sealing by filling putty etc. complete covering 2 years guarantee on bond paper.
742 Excavation 21.27 BDW Providing antitermite treatment to the joints of wooden beams/joist used for the roof work As directed by One Number 57 17
of the existing building as per I.S. 6313 (Part-III) by drilling 6mm dia. holes at a Engineer in charge.
downward angle of about 45 degree at the junction of wood work and masonary and
injecting 80 ml. of chlorodane 5% W.C. and sealing by filling putty etc. complete
covering 2 years guarantee on bond paper.
743 Excavation 21.28 BDW Providing antitermite treatment to the sides of flooring of the existing building as As directed by One Number 26 10
per I.S. 6313 (Part-III) by punching holes 6mm dia. drilled at a distance of 30cm. centre Engineer in charge.
to centre and injecting one percent of chlorodane emulsion concentrate at the rate of 50
ml per hole and sealing by filling putty etc. complete covering 2 years guarantee on bond
paper.
744 Excavation 21.29 BDW Providing antitermite treatment around the periphery of the existing building as per I.S. As directed by One Running 67 36
6313 (Part-III) by excavating trenches of 20cm width and exposing the sides of columns Engineer in charge. Metre
and plinth beams upto a depth of 300mm and injecting one percent of chlorodane
emulsion concentrate at the rate of 2.25 litres per One Running Metre and refilling the
trenches etc. complete covering 2 years guarantee on bond paper.
745 Excavation 21.30 BDW Providing general pest control services to the building to control the nuisance of As directed by One Square 24 10
cockroaches, lizards, pin bores and other insects etc. with 4 operations in a year and Engineer in charge. Metre
monthly check up.
746 Excavation 21.31 BDW Providing general pest control services to small size of inspection chamber to As directed by One Number 184 119
control the nuisance of cockroaches during the year with monthly check up. Engineer in charge.
Page 156
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
747 Excavation 21.32 BDW Providing general pest control services to big size of inspection chamber to control As directed by One Number 365 156
the nuisance of cockroaches during the year with monthly check up. Engineer in charge.
748 Excavation 21.33 BDW Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and As directed by One Square 7 7
alike grass along roadside making the ground clean by showel and phavaras etc. complete. Engineer in charge. Metre
749 Excavation 21.34 BDW Removing grass, gazer grass and disposing off out of building premises including As directed by One Square 6 6
making clean the ground by shovel and phavaras etc. complete. Engineer in Metre
charge.
750 Excavation 21.36 BDA 10 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Bd.A.10 Page One Cubic 120 120
Layers including watering and compacting etc. complete. One Number 262 Metre
751 Excavation 21.37 BDA 11 Filling in plinth and floors with contractors material/brought from outside and approved Bd.A.11 Page One One Cubic Metre 599 135
by Engineer incharge in layers of 15 cm to 20 cm including watering and Number 263
compaction etc. complete.
752 Excavation 21.38 BDA 12 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm Bd.A. 12 Page One Cubic 1382 432
thick including hand packing and compacting etc. complete. One Number 264 Metre
753 Excavation 21.39 BDA 13 Providing and filling in the foundation with sand of approved quality including Bd.A.13 Page One One Cubic Metre 2160 120
watering, compacting etc. complete. (To be executed with prior approval of Number 264
Superintending Engineer)
754 Excavation 21.40 BDA Providing soling using 80 mm size trap metal in 15 cm. layer including filling As directed by One Cubic Metre 1454 436
voids with Crushed sand/grit, ramming, watering etc. complete. Engineer in
charge.
Page 157
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
756 Pile Foundation: 22.02 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete of M2O grade RCC As directed by One Running 1041 273
Building single rim bored pile of 300 mm dia. each of load capacity as per design and of specified Engineer in charge Metre
diameter of pile and bulb as directed, sunk to the required depth through all strata except
rock, excluding provision of reinforcement including placing with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch
mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangement compaction of concrete including chipping and dressing etc.
complete. (Excluding steel reinforcement)
757 Pile Foundation: 22.03 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-20 for single rim As directed by One Running 1355 394
Building bored pile of 380 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except rock,
excluding provision of reinforcement including placing with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete
Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade) by tremie arrangement compaction of concrete including chipping and dressing
etc. complete. (Excluding steel reinforcement)
758 Pile Foundation: 22.04 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-20 for single rim As directed by One Running 1713 549
Building bored pile of 450 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except rock,
excluding provision of reinforcement including placing with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete
Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade) by tremie arrangement compaction of concrete including chipping and dressing
etc. complete. (Excluding steel reinforcement)
Page 158
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
759 Pile Foundation: 22.05 Bd-B Providing and laying M-20 RCC cast in situ single rim bored pile of 535 mm dia. each of As directed by One Running 2175 711
Building load capacity as per design and of specified diameter of pile and bulb as directed, Engineer in charge Metre
sunk to the required depth through all strata except rock, excluding provision of
reinforcement including placing with fully automatic micro processor based PLC
with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by tremie
arrangement compaction of concrete including chipping and dressing etc. complete.
(Excluding steel reinforcement)
760 Pile Foundation: 22.06 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-20 for single rim As directed by One Running 2598 873
Building bored pile of 600 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except rock,
excluding provision of reinforcement including placing with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete
Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade) by tremie arrangement compaction of concrete including chipping and dressing
etc. complete. (Excluding steel reinforcement)
761 Pile Foundation: 22.07 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-25 for single rim As directed by One Running 817 180
Building bored pile of 225 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except rock,
excluding provision of reinforcement including placing with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete
Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade) by tremie arrangement compaction of concrete including chipping and dressing
etc. complete. (Excluding steel reinforcement)
762 Pile Foundation: 22.08 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-25 for single rim As directed by One Running 1069 273
Building bored pile of 300 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except
rock,excluding provision of reinforcement including placing with fully automatic
micro processor based PLC with SCADA enabled reversible Drum Type mixer/
concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade) by tremie arrangement compaction of concrete including chipping and
dressing etc. complete. (Excluding steel reinforcement)
Page 159
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
763 Pile Foundation: 22.09 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-25 for single rim As directed by One Running 1376 394
Building bored pile of 380 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except
rock,excluding provision of reinforcement including placing with fully automatic
micro processor based PLC with SCADA enabled reversible Drum Type mixer/
concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade) by tremie arrangement compaction of concrete including chipping and
dressing etc. complete. (Excluding steel reinforcement)
764 Pile Foundation: 22.10 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-25 for single rim As directed by One Running 1841 549
Building bored pile of 450 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except
rock,excluding provision of reinforcement including placing with fully automatic
micro processor based PLC with SCADA enabled reversible Drum Type mixer/
concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade) by tremie arrangement compaction of concrete including chipping and
dressing etc. complete. (Excluding steel reinforcement)
765 Pile Foundation: 22.11 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-20 for double rim As directed by One Running 923 180
Building bored pile of 225 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except
rock,excluding provision of reinforcement including placing with fully automatic
micro processor based PLC with SCADA enabled reversible Drum Type mixer/
concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade) by tremie arrangement compaction of concrete including chipping and
dressing etc. complete. (Excluding steel reinforcement)
766 Pile Foundation: 22.12 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-20 for double rim As directed by One Running 1335 273
Building bored pile of 300 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except
rock,excluding provision of reinforcement including placing with fully automatic
micro processor based PLC with SCADA enabled reversible Drum Type mixer/
concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade) by tremie arrangement compaction of concrete including chipping and
dressing etc. complete. (Excluding steel reinforcement)
Page 160
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
767 Pile Foundation: 22.13 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-20 for double rim As directed by One Running 1961 394
Building bored pile of 380 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except
rock,excluding provision of reinforcement including placing with fully automatic
micro processor based PLC with SCADA enabled reversible Drum Type mixer/
concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade) by tremie arrangement compaction of concrete including chipping and
dressing etc. complete. (Excluding steel reinforcement)
768 Pile Foundation: 22.14 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-20 for double rim As directed by One Running 2728 549
Building bored pile of 450 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except
rock,excluding provision of reinforcement including placing with fully automatic
micro processor based PLC with SCADA enabled reversible Drum Type mixer/
concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade) by tremie arrangement compaction of concrete including chipping and
dressing etc. complete. (Excluding steel reinforcement)
769 Pile Foundation: 22.15 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-25 for double rim As directed by One Running 962 180
Building bored pile of 225 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except
rock,excluding provision of reinforcement including placing with fully automatic
micro processor based PLC with SCADA enabled reversible Drum Type mixer/
concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade) by concrete prepared in reversible drum type concrete mixer by tremie
arrangement, compaction of concrete including chipping and dressing etc. complete.
(Excluding steel reinforcement)
770 Pile Foundation: 22.16 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-25 for double rim As directed by One Running 1416 273
Building bored pile of 300 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except rock,
excluding provision of reinforcement including placing with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete
Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade) by concrete prepared in reversible drum type concrete mixer by tremie
arrangement, compaction of concrete including chipping and dressing etc. complete.
(Excluding steel reinforcement)
Page 161
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
771 Pile Foundation: 22.17 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-25 for double rim As directed by One Running 2109 394
Building bored pile of 380 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except rock,
excluding provision of reinforcement including placing with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete
Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade) by concrete prepared in reversible drum type concrete mixer by tremie
arrangement, compaction of concrete including chipping and dressing etc. complete.
(Excluding steel reinforcement)
772 Pile Foundation: 22.18 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-25 for double rim As directed by One Running 2955 549
Building bored pile of 450 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except rock,
excluding provision of reinforcement including placing with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete
Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade) by concrete prepared in reversible drum type concrete mixer by tremie
arrangement, compaction of concrete including chipping and dressing etc. complete.
concrete prepared in reversible drum type concrete mixer by tremie arrangement,
compaction of concrete including chipping and dressing etc. complete. (Excluding steel
reinforcement)
773 Pile Foundation: 22.19 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-25 for double rim As directed by One Running 4237 711
Building bored pile of 535 mm dia. each of load capacity as per design and of specified diameter of Engineer in charge Metre
pile and bulb as directed, sunk to the required depth through all strata except
rock,excluding provision of reinforcement including placing with fully automatic
micro processor based PLC with SCADA enabled reversible Drum Type mixer/
concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade) by concrete prepared in reversible drum type concrete mixer by tremie
arrangement, compaction of concrete including chipping and dressing etc. complete.
(Excluding steel reinforcement)
Page 162
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
774 Pile Foundation: 22.20 Bd-B Providing and laying cast in situ / Ready Mix Cement Concrete M-25 for in situ double As directed by One Running 5487 873
Building rim bored pile of 600 mm dia. each of load capacity as per design and of specified Engineer in charge Metre
diameter of pile and bulb as directed, sunk to the required depth through all strata
except rock, excluding provision of reinforcement including placing with fully automatic
micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete
Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
by concrete prepared in reversible drum type concrete mixer by tremie arrangement,
compaction of concrete including chipping and dressing etc. complete.concrete prepared
in reversible drum type concrete mixer by tremie arrangement, compaction of concrete
including chipping and dressing etc. complete. (Excluding steel reinforcement)
775 Pile Foundation: 22.21 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles each As directed by One Running 2659 1352
Building of load capacity and as per design and of 325 mm diameter or as directed placed through Engineer in charge Metre
steel shells sunk to the required depth through all strata except rock excluding
provision of reinforcement as per detailed drawings and design approved by the
Engineer-in- charge including placing with fully automatic micro processor based
PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by concrete
prepared by tremie arrangement, compaction of concrete including chipping and
dressing etc. complete. concrete by tremie arrangements, compaction of concrete
including chipping and dressing and withdrawal of shell etc. complete. (Excluding
steel reinforcement)
776 Pile Foundation: 22.22 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 2771 1379
Building each of load capacity and as per design and of 350mm diameter or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge includingplacing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremiearrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
Page 163
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
777 Pile Foundation: 22.23 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 3002 1435
Building each of load capacity and as per design and of 400 mm diameter.or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge including placing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
778 Pile Foundation: 22.24 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 3129 1467
Building each of load capacity and as per design and of 425mm diameter or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge including placing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
779 Pile Foundation: 22.25 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 3450 1537
Building each of load capacity and as per design and of 475mm diameter or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge including placing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
Page 164
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
780 Pile Foundation: 22.26 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 3941 1772
Building each of load capacity and as per design and of 500mm diameter or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge including placing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
781 Pile Foundation: 22.27 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 4212 1811
Building each of load capacity and as per design and of 525 mm diameter or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge including placing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
782 Pile Foundation: 22.28 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 4379 1852
Building each of load capacity and as per design and of 550 mm diameter or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge including placing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
Page 165
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
783 Pile Foundation: 22.29 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 4738 1940
Building each of load capacity and as per design and of 600 mm diameter or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge including placing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
784 Pile Foundation: 22.30 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 5149 1987
Building each of load capacity and as per design and of 625 mm diameter or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge includingplacing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
785 Pile Foundation: 22.31 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 5348 2035
Building each of load capacity and as per design and of 650 mm diameter or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge includingplacing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
Page 166
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
786 Pile Foundation: 22.32 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 6337 2250
Building each of load capacity and as per design and of 750 mm diameter or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge includingplacing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
787 Pile Foundation: 22.33 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 6822 2368
Building each of load capacity and as per design and of 800 mm diameter. or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge includingplacing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
788 Pile Foundation: 22.34 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 7642 2709
Building each of load capacity and as per design and of 825 mm diameter or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge includingplacing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
Page 167
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
789 Pile Foundation: 22.35 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 8455 2908
Building each of load capacity and as per design and of 900 mm diameter or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge includingplacing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
790 Pile Foundation: 22.36 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 9331 3122
Building each of load capacity and as per design and of 975 mm diameter or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge includingplacing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
791 Pile Foundation: 22.37 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 9641 3198
Building each of load capacity and as per design and of 1000 mm diameter or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge includingplacing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
Page 168
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
792 Pile Foundation: 22.38 Bd/B-4 P-270 Providing and laying cast in situ / Ready Mix Cement Concrete M-30 for bored piles As directed by One Running 10279 5039
Building each of load capacity and as per design and of 1050 mm diameter or as directed placed Engineer in charge Metre
through steel shells sunk to the required depth through all strata except rock
excluding provision of reinforcement as per detailed drawings and design approved
by the Engineer-in- charge includingplacing with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) by
tremie arrangements, compaction of concrete including chipping and dressing and
withdrawal of shell etc. complete. (Excluding steel reinforcement)
793 Pile Foundation: 22.39 Bd/B-2 P-269 Chiseling through pile shells in hard strata like boulders, soft and hard rocks Upto As directed by Rig Hour 911 911
Building and inclusive of 550 mm diameter including removing and stacking the loose Engineer in charge
materials etc. complete and disposing of the unserviceable materials outside complete.
794 Pile Foundation: 22.40 Bd/B-2 P-269 Chiseling through pile shells in hard strata like boulders, soft and hard rocks Beyond 550 As directed by Rig Hour 1434 1434
Building mm and upto and inclusive of 750 mm dia. including removing and stacking the loose Engineer in charge
materials etc. complete and disposing of the unserviceable materials outside complete.
795 Pile Foundation: 22.41 Bd/B-2 P-269 Chiseling through pile shells in hard strata like boulders, soft and hard rocks Beyond 750 As directed by Rig Hour 1659 1659
Building mm and upto and inclusive of 900 mm dia including removing and stacking the loose Engineer in charge
materials etc. complete and disposing of the unserviceable materials outside complete.
796 Pile Foundation: 22.42 Bd/B-2 P-269 Chiseling through pile shells in hard strata like boulders, soft and hard rocks Beyond 900 As directed by Rig Hour 2399 2399
Building mm and upto and inclusive of 1050 mm dia. including removing and stacking the loose Engineer in charge
materials etc. complete and disposing of the unserviceable materials outside complete.
797 Pile Foundation: 22.43 Bd/B-8 P-271 Carrying out load test for 1.5 times the proposed safe working load on the pile in As directed by One Number 105513 80469
Building driven position upto 400 mm diameter including construction of test cap, use of Engineer in charge
accessories and instruments including providing graphs as per I.S. code or
Std.Specifications and dismantling the test cap after testing and cleaning the site complete.
798 Pile Foundation: 22.44 Bd/B-8 P-271 Carrying out load test for 1.5 times the proposed safe working load on the pile in As directed by One Number 127987 102942
Building driven position above 400 mm and upto to 550 mm diameter including construction of Engineer in charge
test cap, use of accessories and instruments including providing graphs as per
I.S. code or Std.Specifications and dismantling the test cap after testing and cleaning
the site complete.
Page 169
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
799 Pile Foundation: 22.45 Bd/B-8 P-271 Carrying out load test for 1.5 times the proposed safe working load on the pile in As directed by One Number 176736 151692
Building driven position above 550 mm and upto 650 mm diameter including construction of test Engineer in charge
cap, use of accessories and instruments including providing graphs as per I.S. code or
Std.Specifications and dismantling the test cap after testing and cleaning the site complete.
800 Pile Foundation: 22.46 Bd/B-8 P-271 Carrying out load test for 1.5 times the proposed safe working load on the pile in As directed by One Number 222412 197368
Building driven position above 650 mm and upto 750 mm diameter including construction of test Engineer in charge
cap, use of accessories and instruments including providing graphs as per I.S. code or
Std.Specifications and dismantling the test cap after testing and cleaning the site complete.
801 Pile Foundation: 22.47 Bd/B-8 P-271 Carrying out load test for 1.5 times the proposed safe working load on the pile in As directed by One Number 268147 243103
Building driven position above 750 mm and upto 825 mm diameter including construction of test Engineer in charge
cap, use of accessories and instruments including providing graphs as per I.S. code or
Std.Specifications and dismantling the test cap after testing and cleaning the site complete.
802 Pile Foundation: 22.48 Bd/B-8 P-271 Carrying out load test for 1.5 times the proposed safe working load on the pile in As directed by One Number 311479 286435
Building driven position above 825 mm and upto 900 mm diameter including construction of test Engineer in charge
cap, use of accessories and instruments including providing graphs as per I.S. code or
Std.Specifications and dismantling the test cap after testing and cleaning the site complete.
803 Pile Foundation: 22.49 Bd/B-8 P-271 Carrying out load test for 1.5 times the proposed safe working load on the pile in As directed by One Number 388752 363707
Building driven position above 900 mm diameter including construction of test cap, use of Engineer in charge
accessories and instruments including providing graphs as per I.S. code or
Std.Specifications and dismantling the test cap after testing and cleaning the site complete.
804 Pile Foundation: 22.50 Empty boring for 325 to 400 mm dia bored R.C.C. cast in situ piles including withdrawal As directed by One Running 579 422
Building of shell, removal of earth to a distance of 50 metres etc. complete. Engineer in charge Metre
Spec :(As directed by Engineer in Charge)
805 Pile Foundation: 22.51 Empty boring for 425 to 500 mm dia. bored R.C.C. cast in situ piles including withdrawal As directed by One Running 668 504
Building of shell, removal of earth to a distance of 50 metres etc. complete. Engineer in charge Metre
Spec :(As directed by Engineer in Charge)
806 Pile Foundation: 22.52 Empty boring for 525 to 600 mm dia. bored R.C.C. cast in situ piles including withdrawal As directed by One Running 1348 1166
Building of shell, removal of earth to a distance of 50 metres etc. complete. Engineer in charge Metre
Spec :(As directed by Engineer in Charge)
807 Pile Foundation: 22.53 Empty boring for 625 to 700 mm dia. bored R.C.C. cast in situ piles including withdrawal As directed by One Running 1384 1166
Building of shell, removal of earth to a distance of 50 metres etc. complete. Engineer in charge Metre
Spec :(As directed by Engineer in Charge)
Page 170
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
808 Pile Foundation: 22.54 Empty boring for 725 to 1050 mm dia. bored R.C.C. cast in situ piles including As directed by One Running 1485 1249
Building withdrawal of shell, removal of earth to a distance of 50 metres etc. complete. Engineer in charge Metre
Spec :(As directed by Engineer in Charge)
809 Pile Foundation: 22.55 Chipping and dressing of the R.C.C. piles upto 0.60 meterincluding cleaning As directed by One Number 744 744
Building reinforcement and removal of dismantled materials upto a distance of 50 meter beyond the Engineer in charge
building area etc. for providing pile caps.
Spec :(As directed by Engineer in Charge
810 Pile 22.56 Providing bentonite slurry process for various diameter of piles vide Item Nos 1 (i to xxiv) As directed by One Running 80 30
Foundation: above. Spec : (As directed by Engineer in Charge) Engineer in charge Metre
Building
811 Pile Foundation: 22.57 Providing placing and Driving in position 6 millimeter mild steel liner for R.C.C. Piles As directed by Metric Tonne 100890 21389
Building upto required depth with 12mm thick mild steel cutting edge of 0.50m length at bottom Engineer in charge
including fabricating cutting the mild steel sheet to required diameter and shape ,welding
the joints and driving with the help of required machineries including all materials
labours and lifts etc. complete as directed by the Engineer in charge. Upto 3.00 meter
deep liner
812 Pile Foundation: 22.58 Providing placing and Driving in position 6 millimeter mild steel liner for R.C.C. Piles As directed by Metric Tonne 104801 25299
Building upto required depth with 12mm thick mild steel cutting edge of 0.50m length at bottom Engineer in charge
including fabricating cutting the mild steel sheet to required diameter and shape ,welding
the joints and driving with the help of required machineries including all materials
labours and lifts etc. complete as directed by the Engineer in charge. Spec :(As directed
by Engineer in Charge From 3.00 to 9.50 meter deep liner
813 Pile Foundation: 22.59 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap metal for As directed by One Cubic Metre 7534 2165
Building R.C.C. pile caps as per detailed designs and drawings, including bailing out water Engineer in charge
manually, centering, formwork, laying/ pumping, compacting, finishing and curing
etc. with fully automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.
complete.with Crushed sand VSI Grade/V.S.I. quality Artificial Sand, complete.
(Excluding steel reinforcement)
814 Pile Foundation: 22.60 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap metal for As directed by One Cubic Metre 7505 2165
Building R.C.C. pile caps as per detailed designs and drawings, including bailing out water Engineer in charge
manually, centering, formwork, laying/ pumping, compacting, finishing and curing
etc. with fully automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.
complete.with Crushed sand VSI Grade/V.S.I. quality Artificial Sand, complete.
(Excluding steel reinforcement)
Page 171
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
815 Pile Foundation: 22.61 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for As directed by One Cubic Metre 7695 2165
Building R.C.C. pile caps as per detailed designs and drawings, including bailing out water Engineer in charge
manually, centering, formwork, laying/ pumping, compacting, finishing and curing
etc. with fully automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With
fine aggregate (Crushed sand VSI Grade) complete (Excluding steel reinforcement)
Page 172
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
818 Structural Steel 23.03 BDC 6 Providing structural steel work in single stanchions composed of R.S.J. Channel Bd.C.6 Page One Metric Tonne 98009 14265
Work etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor Number 277
bolts etc. as per detailed designs and drawings or as directed including cutting,
fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded
connection and one coat of anticorrosive paint and over it two. coats of oil painting
approved quality and shade etc. complete.
819 Structural Steel 23.04 BDC 8 Providing structural steel work in trusses, other similar trussed purlins and members with Bd.C.8 Page One Metric Tonne 119459 33890
Work all bracing, gusset plates etc. as per detailed designs and drawings or as directed Number 278
including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/
bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil
painting approved quality and shade etc. complete.
820 Structural Steel 23.05 BDC Providing and fixing 50 mm. dia. medium class G.I.pipe gate with wicket gate of As directed by One Square 7257 3898
Work approved drawing with all fixtures and fittings in two leaves with strong hold fast Engineer in charge. Metre
embedded in c.c. block at top and bottom with locking arrangement including cutting,
bending, making holes and with one coat of primer etc. complete.
821 Structural Steel 23.06 BDC Providing and erecting structural steel for sakav with all bracing gusset plates etc. As directed by Metric Tonne 123398 36975
Work as per detailed design and drawing or as directed including cutting, fabricating, Engineer in charge.
hoisting, erecting, fixing in position, making riveted/ bolted/welded connection and oil
painting with 2 coats of approved quality and shade etc. complete. complete.
Page 173
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
822 Structural Steel 23.07 BDC Providing, fabricating and erecting at site of work the tubular steel structure (shed) B-18 Page One Metric Tonne 114831 22701
Work as per standard design and specifications having various spans in between trusses and in Number 78
multiples of standard length of bays as specified as per standard specifications, inclusive
of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base
plates, nuts and bolts, welding wherever required etc. as per detailed drawing
inclusive of one coat of anticorrosive paint and two coats of oil painting of approved
quality and shade etc. complete. Spec. One Number : As directed by Engineer-in-charge.
823 Structural Steel 23.08 BDC Providing Gas or Electrical welding for structural steel section, plates as per detailed B.18, Page No 78 Centimetre 11 8
Work drawing. For less than 10 mm thick section.
824 Structural Steel 23.09 BDW 6A Providing and fixing mild steel grill gate as per the detailed drawing including hinges, Spec. One Number One Square 2100 267
Work locking arrangements and painting in three coats of oil paint of approved colour As directed Metre
and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) byEngineer in
Spec.One Number: As directed by Engineer- in-charge. Charge.
825 Structural Steel 23.11 Providing structural steel work of rectangular hollow steel section for steel trusses, Spec. One Number Metric Tonne 118790 22701
Work other similar trussed items like purlin and members with all bracing, gusset plates As directed
etc. as per detailed designs and drawings or as directed including cutting, fabricating, byEngineer in
hoisting, erecting, fixing in position making riveted/bolted/ welded connections and Charge.
one coat of anticorrosive paint and over it two coats of oil painting of approved quality
and shade complete.
826 Structural Steel 23.12 Providing structural steel work in hollow section of various thickness and sizes in Spec. One Number Metric Tonne 118790 22701
Work square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST As directed
310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and byEngineer in
drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in Charge.
position, making riveted/bolted/ welded connections and painting complete.
Page 174
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
829 Plain Cement 24.06 BDE 2 Providing and laying Cast in situ/Ready Mixcement concrete in M20 of Bd.E.2 Page One One Cubic Metre 6721 1616
Concrete trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, Number 288 and
laying/pumping, compacting, roughening them if special finish is to be provided, B.7 Page No 38
finishing uneven and honeycombed surface and curing etc. complete. The Cement
Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only.
Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden
centering will not be allowed.), with fully automatic micro processor based PLC
with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Page 175
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
830 Plain Cement 24.08 BDE 4 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of Bd.E.4 Page One One Cubic Metre 6359 1616
Concrete trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other Number 289 and B-
items including bailing out water, Steel centering, formwork, laying/ pumping, 7, Page One
compacting, roughening them if special finish is to be provided, finishing uneven Number38
and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is
considered for rendering uneven and honeycombed surface only. Newly laid concrete shall
be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be
allowed.), with fully automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With
fine aggregate (Crushed sand VSI Grade)
831 Plain Cement 24.10 BDE 4 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of Bd.E.4 Page One One Cubic Metre 6721 1616
Concrete trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other Number 289 and B-
items including bailing out water, Steel centering, formwork, laying/ pumping, 7, Page One
compacting, roughening them if special finish is to be provided, finishing uneven Number38
and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is
considered for rendering uneven and honeycombed surface only. Newly laid concrete shall
be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be
allowed.), with fully automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With
fine aggregate (Crushed sand VSI Grade)
832 Plain Cement 24.12 BDE 7 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap / Bd.E.7 Page No 291 One Cubic Metre 12940 4248
Concrete granite/quartzite/ gneiss metal for arches including skew backs as per detailed drawing or and B-7
as directed in superstructure including steel centering, formwork, compacting, finishing Page No .38
with minimum thickness of 1:3 cement plaster to give a smooth and even surface
or roughening them if special finish is to be provided and curing and finishing if
required complete, with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer. complete, . With fine aggregate (Crushed sand
VSI Grade)
Page 176
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
833 Plain Cement 24.14 BDE 5 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of Bd.E. 5/Page One One Cubic Metre 6359 1778
Concrete trap/ granite/quartzite/gneiss metal for plain or molded sills, cornice, jambs, block Number 290/I.S.
in course, or architraves of required size and shapes including steel centering, formwork, 456 (2000)
laying/ pumping, compacting, roughening them if special finish is to be
provided,finishing uneven and honeycombed surface and curing etc. complete. The
Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface
only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.
(Wooden centering will not be allowed.) with fully automatic micro processor based
PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant
(Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
834 Plain Cement 24.15 BDE 5 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of Bd.E. 5/Page One One Cubic Metre 6721 1778
Concrete trap/ granite/quartzite/gneiss metal for plain or molded sills, cornice, jambs, block Number 290/I.S.
in course, or architraves of required size and shapes including steel centering, formwork, 456 (2000)
laying/ pumping, compacting, roughening them if special finish is to be
provided,finishing uneven and honeycombed surface and curing etc. complete. The
Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface
only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.
(Wooden centering will not be allowed.) with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer etc. complete, With
fine aggregate (Crushed sand VSI Grade)
835 Plain Cement 24.16 BDE 3 Providing and laying Cast in situ/Ready Mix cement concrete M-15 of Bd.E. 3/Page One One Cubic Metre 6359 1778
Concrete trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or Number 288/I.S.
chamfered as per drawing or as directed including steel centering, plywood/ steel 456 (2000)
formwork compacting, roughening them if special finish is to be provided, finishing
uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3
plaster is considered for rendering uneven and honeycombed surface only. Newly laid
concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not
be allowed.) With fine aggregate (Crushed sand VSI Grade)
Page 177
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
837 Reinforced 25.13 BDF 3 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / Bd.F.3 Page One One Cubic Metre 7287 2110
Cement Concrete granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip Number 298 and
foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including B.7, Page One
bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, Number38
compaction and curing roughening the surface if special finish is to be provided
(Excluding reinforcement and structural steel) etc. complete, with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch
mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
838 Reinforced 25.15 BDF 3 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / Bd.F.3 Page One One Cubic Metre 7471 2110
Cement Concrete granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip Number 298 and
foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as B.7, Page One
per detailed designs and drawing or as directed including Steel centering formwork, Number38
cover blocks laying/pumping, compaction finishing the formed surfaces with cement
mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or
roughening if special finish is to be provided and curing etc. complete. (Excluding
reinforcement and structural steel). with fully automatic micro processor based PLC
with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Page 178
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
839 Reinforced 25.17 BDF 3 Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap / Bd.F.3 Page One One Cubic Metre 7562 2110
Cement Concrete granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, Number 298 and
grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed B.7, Page One
designs and drawing or as directed including Steel centering, formwork, cover Number38
blocks, laying/pumping, compaction finishing the formed surfaces with cement
mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or
roughening if special finish is to be provided and curing etc. complete,(Excluding
reinforcement and structural steel).with fully automatic micro processor based PLC
with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
840 Reinforced 25.19 BDF 3 Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / Bd.F.3 Page One One Cubic Metre 7801 2110
Cement Concrete granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, Number 298 and
grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed B.7, Page One
designs and drawing or as directed including steel centering, formwork, cover Number38
blocks, laying/pumping, compaction finishing the formed surfaces with cement
mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or
roughening if special finish is to be provided and curing etc. complete. (Excluding
reinforcement and structural steel).with fully automatic micro processor based PLC
with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
841 Reinforced 25.31 BDF 5 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / Bd.F.5 Page One One Cubic Metre 13783 5252
Cement Concrete granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or Number 300 and B.7,
as directed including steel centering, formwork, cover blocks, laying/pumping, Page.One Number 38
compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum
thickness to give a smooth and even surface or roughening if special finish is to
be provided and curing etc. complete.(Excluding reinforcement and structural
steel).with fully automatic micro processor based PLC with SCADA enabled reversible
Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)
Page 179
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
842 Reinforced 25.33 BDF 5 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / Bd.F.5 Page One One Cubic Metre 13967 5252
Cement Concrete granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and Number 300 and
drawings or as directed including steel centering, formwork, cover blocks, B-7,Page No 38.
laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of
sufficient minimum thickness to give a smooth and even surface or roughening if special
finish is to be provided and curing etc. complete,(Excluding reinforcement and structural
steel).with fully automatic micro processor based PLC with SCADA enabled reversible
Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)
843 Reinforced 25.35 BDF 5 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / Bd.F.5 Page One One Cubic Metre 14150 5252
Cement Concrete granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or Number 300 and B.7,
as directed including steel centering, formwork,cover blocks, laying/pumping, compaction Page.One Number 38
finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to
give a smooth and even surface or roughening if special finish is to be
provided and curing etc. complete,(Excluding reinforcement and structural steel). with
fully automatic micro processor based PLC with SCADA enabled reversible Drum Type
mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade)
844 Reinforced 25.37 BDF 5 Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap / Bd.F.5 Page One One Cubic Metre 14242 5252
Cement Concrete granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or Number 300 and B.7,
as directed including steel centering, formwork, cover blocks, laying/pumping, Page.One Number 38
compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum
thickness to give a smooth and even surface or roughening if special finish is to
be provided and curing etc. complete,(Excluding reinforcement and structural
steel).with fully automatic micro processor based PLC without SCAD Aenabled reversible
Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)
Page 180
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
845 Reinforced 25.39 BDF 5 Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / Bd.F.5 Page One One Cubic Metre 14333 5252
Cement Concrete granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or Number 300 and B.7,
as directed including steel centering, formwork, cover blocks, laying/pumping, Page.One Number 38
compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum
thickness to give a smooth and even surface or roughening if special finish is to
be provided and curing etc. complete,(Excluding reinforcement and structural
steel).with fully automatic micro processor based PLC with SCADA enabled reversible
Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)
846 Reinforced 25.50 BDF 6 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / Bd.F.6 Page One One Cubic Metre 12269 5085
Cement Concrete granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and Number 300 and
drawings or as directed including steel centering, formwork, cover blocks, B.7, Page One
laying/pumping, compactionand roughening the surface if special finish is to be Number38
provided and curing etc. complete. (Excluding reinforcement and structural steel).
with fully automatic micro processor based PLC with SCADA enabled reversible
Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)
847 Reinforced 25.52 BDF 6 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ Bd.F.6 Page One One Cubic Metre 12452 5085
Cement Concrete granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and Number 300 and
drawings or as directed including steel centering, formwork, cover blocks, B.7, Page One
laying/pumping, compactionand roughening the surface if special finish is to be provided Number38
and curing etc. complete. (Excluding reinforcement and structural steel).with fully
automatic micro processor based PLC with SCADA enabled reversible Drum Type
mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate
(Crushed sand VSI Grade)
848 Reinforced 25.54 BDF 6 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / Bd.F.6 Page One One Cubic Metre 12635 5085
Cement Concrete granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and Number 300 and
drawings or as directed including steel centering, formwork, cover blocks, B.7, Page One
laying/pumping, compactionand roughening the surface if special finish is to be Number38
provided and curing etc. complete. (Excluding reinforcement and structural steel).with
fully automatic micro processor based PLC with SCADA enabled reversible Drum Type
mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade)
Page 181
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
849 Reinforced 25.56 BDF 6 Providing and laying Cast in situ/Ready Mixcement concrete M-35 of trap / granite Bd.F.6 Page One One Cubic Metre 12727 5085
Cement Concrete /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings Number 300 and
or as directed including steel centering, formwork, cover blocks, laying/pumping, B.7, Page One
compactionand roughening the surface if special finish is to be provided and curing etc. Number38
complete. (Excluding reinforcement and structural steel).with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete
Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade)
850 Reinforced 25.58 BDF 6 Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / Bd.F.6 Page One One Cubic Metre 13002 5085
Cement Concrete granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and Number 300 and
drawings or as directed including steel centering, formwork, cover blocks, B.7, Page One
laying/pumping, compactionand roughening the surface if special finish is to be Number38
provided and curing etc. complete. (Excluding reinforcement and structural steel).
with fully automatic micro processor based PLC with SCADA enabled reversible
Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)
851 Reinforced 25.70 BDF 8 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ Bd.F.8 Page One One Cubic Metre 13932 5988
Cement Concrete granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs Number 302 and
and drawings including steel centering, formwork, cover blocks, laying/pumping, B.7, Page One
compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum Number38
thickness to give a smooth and even surface or roughening if special finish is to
be provided and curing etc. complete,(Excluding reinforcement and structural
steel).with fully automatic micro processor based PLC with SCADA enabled reversible
Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)
852 Reinforced 25.72 BDF 8 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ Bd.F.8 Page One One Cubic Metre 14116 5988
Cement Concrete granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs Number 302 and
and drawings including steel centering, formwork, cover blocks, laying/pumping, B.7, Page One
compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum Number38
thickness to give a smooth and even surface or roughening if special finish is to
be provided and curing etc. complete,(Excluding reinforcement and structural
steel).with fully automatic micro processor based PLC with SCADA enabled reversible
Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)
Page 182
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
853 Reinforced 25.74 BDF 8 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ Bd.F.8 Page One One Cubic Metre 14299 5988
Cement Concrete granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs Number 302 and
and drawings including steel centering, formwork, cover blocks, laying/pumping, B.7, Page One
compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum Number38
thickness to give a smooth and even surface or roughening if special finish is to
be provided and curing etc. complete,(Excluding reinforcement and structural
steel).with fully automatic micro processor based PLC with SCADA enabled reversible
Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)
854 Reinforced 25.76 BDF 8 Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap/ Bd.F.8 Page One One Cubic Metre 14391 5988
Cement Concrete granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs Number 302 and
and drawings including steel centering, formwork, cover blocks, laying/pumping, B.7, Page One
compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum Number38
thickness to give a smooth and even surface or roughening if special finish is to
be provided and curing etc. complete,(Excluding reinforcement and structural steel).
with fully automatic micro processor based PLC with SCADA enabled reversible Drum
Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate
(Crushed sand VSI Grade)
855 Reinforced 25.78 BDF 8 Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ Bd.F.8 Page One One Cubic Metre 14666 5988
Cement Concrete granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs Number 302 and
and drawings including steel centering, formwork, cover blocks, laying/pumping, B.7, Page One
compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum Number38
thickness to give a smooth and even surface or roughening if special finish is to
be provided and curing etc. complete,(Excluding reinforcement and structural
steel).with fully automatic micro processor based PLC with SCADA enabled reversible
Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine
aggregate (Crushed sand VSI Grade)
Page 183
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
857 Reinforced 26.07 BDF 9 Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ Bd.F.9 Page One One Cubic Metre 14116 5988
Cement Concrete quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including Number 303 and
steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the B.7, Page One
surface if special finish is to be provided and curing complete. (Excluding reinforcement Number38
and structural steel). with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.
complete. With fine aggregate (Crushed sand VSI Grade)
858 Reinforced 26.09 BDF10 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / Bd.F.8 Page One One Cubic Metre 13932 5988
Cement Concrete granite / quartzite / gneiss metal for R.C.C. canopy as per detailed designs and Number 303 and
drawings including steel centering, formwork, laying/pumping, compacting and B.7, Page One
roughening the surface if special finish is to be provided and curing etc. complete Number38
(excluding reinforcement), with fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.
complete. With fine aggregate (Crushed sand VSI Grade)
859 Reinforced 26.11 BDF10 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / Bd.F.8 Page One One Cubic Metre 14116 5988
Cement Concrete granite / quartzite / gneiss metal for R.C.C. canopy as per detailed designs and Number 303 and
drawings including steel centering, formwork, laying/pumping, compacting and B.7, Page One
roughening the surface if special finish is to be provided and curing etc. complete Number38
(excluding reinforcement). with fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.
complete. With fine aggregate (Crushed sand VSI Grade)
Page 184
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
860 Reinforced 26.17 BDF 11 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ Bd.F.11 Page One One Cubic Metre 15567 7338
Cement Concrete granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including Number 304 and
steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing B.7, Page One
and rougheningthem if special finish is to be provided and curing Number 38
complete.(Excluding reinforcement and structural steel).with fully automatic micro
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete
Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
861 Reinforced 26.19 BDF 11 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ Bd.F.11 Page One One Cubic Metre 15750 7338
Cement Concrete granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including Number 304 and
steel centering, formwork, cover blocks, laying/pumping, compacting and roughening B.7, Page One
them if special finish is to be provided and curing complete. (Excluding Number 38
reinforcement and structural steel).with fully automatic micro processor based PLC
with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
862 Reinforced 26.23 BDF 12 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ Bd. F. 12 Page One One Cubic Metre 7190 2196
Cement Concrete granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and Number 304 and
windows moulded as per detailed drawings or chamfered as approved by the Engineer B-7, Pg 38
including steel centering, formwork, cover blocks, laying/pumping, compacting ,
curing , finishing and roughening them if special finish is to be provided and
curing complete. (Excluding reinforcement and structural steel).with fully automatic
micro processor based PLC with SCADA enabled reversible Drum Type mixer/
concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade)
863 Reinforced 26.25 BDF 13A Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap / Bd. F. 13 Page One One Cubic Metre 12060 5219
Cement Concrete quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per Number 305
detailed design and drawings or as directed including steel centering, formwork, /I.S. 456 (2000
steel props, laying/pumping, compaction, finishing uneven and honeycombed surface
with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or
roughening the surface if special finish is to be provided and curing etc. complete.
(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by
gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.
complete. With fine aggregate (Crushed sand VSI Grade)
Page 185
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
864 Reinforced 26.26 BDF 13A Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / Bd. F. 13 Page One One Cubic Metre 12244 5219
Cement Concrete quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per Number 305
detailed design and drawings or as directed including steel centering, plywood/ steel /I.S. 456 (2000
formwork, steel props, laying/pumping, compaction, finishing uneven and
honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth
and even surface or roughening the surface if special finish is to be provided and curing
etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall
be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
865 Reinforced 26.27 BDF 14A Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap / Bd. F. 14 Page One One Cubic Metre 12805 4861
Cement Concrete quartzite/granite /gneiss metal for R.C.C.newel posts of staircase as per detailed design Number 305
and drawings including steel centering, plywood / steel formwork, steel props, /I.S. 456 (2001
laying / pumping, compaction, finishing uneven and honeycombed surface with
C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or
roughening the surface if special finish is to be provided and curing etc. complete.
(Excluding reinforcement, including cover block). (Newly laid concrete shall be
covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor
based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix
plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
866 Reinforced 26.28 BDF 14A Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / Bd. F. 14 Page One One Cubic Metre 12989 4861
Cement Concrete quartzite/granite /gneiss metal for R.C.C.newel posts of staircase as per detailed design Number 305
and drawings including steel centering, plywood / steel formwork, steel props, /I.S. 456 (2002
laying/pumping, compaction, finishing uneven and honeycombed surface with C.M.1:3 of
sufficient minimum thickness to give a smooth and even surface or roughening the surface
if special finish is to be provided and curing etc. complete. (Excluding reinforcement,
including cover block). (Newly laid concrete shall be covered by gunny bag, plastic,
tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With
fine aggregate (Crushed sand VSI Grade)
Page 186
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
867 Reinforced 26.29 BDF 15A Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap Bd. F. 15 Page One One Cubic Metre 14136 5393
Cement Concrete /granite / gneiss/ quartzite metal for R.C.C. arches with skew backs as per detailed design Number 306
and drawings or as directed including steel centering, plywood/steel formwork, steel /I.S. 456 (2003
props, laying/pumping, compaction, finishing uneven and honeycombed surface with
C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or
roughening the surface if special finish is to be provided and curing etc. complete.
(Excluding reinforcement, including cover block). Newly laid concrete shall be covered by
gunny bag, plastic, tarpaulin etc. with fully automatic micro processor based PLC with
SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.
complete. With fine aggregate (Crushed sand VSI Grade)
868 Reinforced 26.30 BDF 15A Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap Bd. F. 15 Page One One Cubic Metre 14319 5393
Cement Concrete /granite / gneiss/ quartzite metal for R.C.C. arches with skew backs as per detailed design Number 306
and drawings or as directed including steel centering, plywood/steel formwork, steel /I.S. 456 (2003
props, laying/pumping, compaction, finishing uneven and honeycombed surface with
C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or
roughening the surface if special finish is to be provided and curing etc. complete.
(Excluding reinforcement, including cover block). Newly laid concrete shall be covered by
gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) With fine
aggregate (Crushed sand VSI Grade)
869 Reinforced 26.31 BDF 16 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap / Bd. F. 16 Page One One Cubic Metre 17601 8136
Cement Concrete granite/gneiss / quartzite metal for R.C.C. fins of required thickness in position as Number 306
shown on the drawings or as directed by Engineer-in-charge including steel /I.S. 456 (2004
centering, plywood / steel formwork, steel props, laying/pumping, compaction,
finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum
thickness to give a smooth and even surface or roughening the surface if special finish is
to be provided and curing etc. complete. (Excluding reinforcement, including cover
block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. with
fully automatic micro processor based PLC with SCADA enabled reversible Drum Type
mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade)
Page 187
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
870 Reinforced 26.32 BDF 16 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / Bd. F. 16 Page One One Cubic Metre 17785 8136
Cement Concrete granite/gneiss / quartzite metal for R.C.C. fins of required thickness in position as Number 306
shown on the drawings or as directed by Engineer-in-charge including steel /I.S. 456 (2004
centering, plywood / steel formwork, steel props, laying/pumping, compaction,
finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum
thickness to give a smooth and even surface or roughening the surface if special finish is
to be provided and curing etc. complete. (Excluding reinforcement, including cover
block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. with
fully automatic micro processor based PLC with SCADA enabled reversible Drum Type
mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade)
871 Reinforced 26.33 BDF 17 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters Bd.F.17, Page One Metric Tonne 89703 11762
Cement Concrete for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, Number 306
staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed
designs, drawings and schedules. including cutting, bending, hooking the bars, binding
with wires or tack welding and supporting as required complete.
872 Reinforced 26.34 BDF 17 Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar Bd.F.17, Page One Metric Tonne 94136 11880
Cement Concrete reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, Number 306
beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins,
arches etc. as per detailed designs, drawings and schedules. including cutting, bending,
hooking the bars, binding with wires or tack welding and supporting as required complete.
873 Reinforced 26.36 Providing and applying Anti corrosive treatment to reinforcement as per cement As directed by Metric Tonne 11287 6562
Cement Concrete polymer composite coating (C.P.C.C.) method developed by C.E.C.R.I. including Engineer in Charge
cleaning the bar by means of any established mechanical or manual method for
removing rust and deleterious material, applying rapid setting primer and cement
polymer sealing coat of approved and licensed by CECRI including redoing the
process if damage occurs during handling, stacking etc. complete. (With prior approval of
SE)
Page 188
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
874 Reinforced 26.37 MORT and H 1600 Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced bars of 8mm diameter as As directed by Metric Tonne 24710 1024
Cement Concrete Edition per IS: 13620-1993 specifications for a thickness of 175micron Permissible variation Engineer in Charge
2001. of 50 micron including testing of coating at plant, including cost for careful handling
using PVC coating, binding wires instead of G. I. wires to and from Plant)
touching up the material supplied repair work etc complete as per detailed
specifications. (Lead 200km from plant) etc complete. (Item shall be used for new
structures.)
Note : The item should be executed with prior approval of Superintending Engineer.
FREQUENCY OF TEST OF FUSION BONDED EPOXY COAT
a) Coating thickness shall be tested at a frequency of not less than one full length bar
every twenty bars for each size
b) continuity of coating shall be determined by testing one full length bar in every twenty
bars for each size
c) Coating thickness over the whole of the coated bar section shall be determined
by sectioning and examining one bar in every twenty tonnes for each size.
d) For testing adhesion of coating, samples shall be selected from each size according to
the frequency given below:
Nominal Size of Bar, MM One Number of Samples
For all types of bar : Minimum 1 for every diameter or as directed by engineer in charge
Page 189
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
875 Reinforced 26.38 MORT and H 1600 Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced bars of 10mm diameter As directed by Metric Tonne 19640 1024
Cement Concrete Edition as per IS: 13620-1993 specifications for a thickness of 175micron Permissible variation of Engineer in Charge
2001. 50 micron including testing of coating at plant, including cost for careful handling using
PVC coating, binding wires instead of G. I. wires to and from Plant) touching up
the material supplied repair work etc complete as per detailed specifications. (Lead
200km from plant) etc complete. (Item shall be used for new structures.)
Note : The item should be executed with prior approval of Superintending Engineer.
FREQUENCY OF TEST OF FUSION BONDED EPOXY COAT
a) Coating thickness shall be tested at a frequency of not less than one full length bar
every twenty bars for each size
b) continuity of coating shall be determined by testing one full length bar in every twenty
bars for each size
c) Coating thickness over the whole of the coated bar section shall be determined
by sectioning and examining one bar in every twenty tonnes for each size.
d) For testing adhesion of coating, samples shall be selected from each size according to
the frequency given below:
For all types of bar : Minimum 1 for every diameter or as directed by engineer in charge
Page 190
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
876 Reinforced 26.39 MORT and H 1600 Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced bars of 12mm diameter As directed by Metric Tonne 16896 1024
Cement Concrete Edition as per IS: 13620-1993 specifications for a thickness of 175micron Permissible variation of Engineer in Charge
2001. 50 micron including testing of coating at plant, including cost for careful handling using
PVC coating, binding wires instead of G. I. wires to and from Plant) touching up
the material supplied repair work etc complete as per detailed specifications. (Lead
200km from plant) etc complete. (Item shall be used for new structures.)
Note : The item should be executed with prior approval of Superintending Engineer.
FREQUENCY OF TEST OF FUSION BONDED EPOXY COAT
a) Coating thickness shall be tested at a frequency of not less than one full length bar
every twenty bars for each size
b) continuity of coating shall be determined by testing one full length bar in every twenty
bars for each size
c) Coating thickness over the whole of the coated bar section shall be determined
by sectioning and examining one bar in every twenty tonnes for each size.
d) For testing adhesion of coating, samples shall be selected from each size according to
the frequency given below:
For all types of bar : Minimum 1 for every diameter or as directed by engineer in charge
Page 191
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
877 Reinforced 26.40 MORT and H 1600 Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced bars of 16mm diameter As directed by Metric Tonne 13108 1024
Cement Concrete Edition as per IS: 13620-1993 specifications for a thickness of 175micron Permissible variation of Engineer in Charge
2001. 50 micron including testing of coating at plant, including cost for careful handling using
PVC coating, binding wires instead of G. I. wires to and from Plant) touching up
the material supplied repair work etc complete as per detailed specifications. (Lead
200km from plant) etc complete. (Item shall be used for new structures.)
Note : The item should be executed with prior approval of Superintending Engineer.
FREQUENCY OF TEST OF FUSION BONDED EPOXY COAT
a) Coating thickness shall be tested at a frequency of not less than one full length bar
every twenty bars for each size
b) continuity of coating shall be determined by testing one full length bar in every twenty
bars for each size
c) Coating thickness over the whole of the coated bar section shall be determined
by sectioning and examining one bar in every twenty tonnes for each size.
d) For testing adhesion of coating, samples shall be selected from each size according to
the frequency given below:
For all types of bar : Minimum 1 for every diameter or as directed by engineer in charge
Page 192
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
878 Reinforced 26.41 MORT and H 1600 Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced bars of 20mm diameter As directed by Metric Tonne 10841 1024
Cement Concrete Edition as per IS: 13620-1993 specifications for a thickness of 175micron Permissible variation of Engineer in Charge
2001. 50 micron including testing of coating at plant, including cost for careful handling using
PVC coating, binding wires instead of G. I. wires to and from Plant) touching up
the material supplied repair work etc complete as per detailed specifications. (Lead
200km from plant) etc complete. (Item shall be used for new structures.)
Note : The item should be executed with prior approval of Superintending Engineer.
FREQUENCY OF TEST OF FUSION BONDED EPOXY COAT
a) Coating thickness shall be tested at a frequency of not less than one full length bar
every twenty bars for each size
b) continuity of coating shall be determined by testing one full length bar in every twenty
bars for each size
c) Coating thickness over the whole of the coated bar section shall be determined
by sectioning and examining one bar in every twenty tonnes for each size.
d) For testing adhesion of coating, samples shall be selected from each size according to
the frequency given below:
For all types of bar : Minimum 1 for every diameter or as directed by engineer
in chargecharge
879 Reinforced 26.42 MORT and H 1600 Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced bars of 25mm diameter As directed by Metric Tonne 9051 1024
Cement Concrete Edition as per IS: 13620-1993 specifications for a thickness of 175micron Permissible variation of Engineer in Charge
2001. 50 micron including testing of coating at plant extra cost for careful handling using PVC
coating, binding wires instead of G. I. wires to and from Plant) touching up the
material supplied repair work etc complete as per detailed specifications. (Lead
200km from plant) etc complete. (Item shall be used for new structures.) Note : The item
should be executed with prior approval of Superintending Engineer. charge
Page 193
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
880 Reinforced 26.44 MORT and H 1600 Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced bars of 32mm diameter As directed by Metric Tonne 7411 1024
Cement Concrete Edition as per IS: 13620-1993 specifications for a thickness of 175micron Permissible variation of Engineer in Charge
2001. 50 micron including testing of coating at plant extra cost for careful handling using PVC
coating, binding wires instead of G. I. wires to and from Plant) touching up the
material supplied repair work etc complete as per detailed specifications. (Lead
200km from plant) etc complete. (Item shall be used for new structures.)
Note : The item should be executed with prior approval of Superintending Engineer.
FREQUENCY OF TEST OF FUSION BONDED EPOXY COAT
a) Coating thickness shall be tested at a frequency of not less than one full length bar
every twenty bars for each size
b) continuity of coating shall be determined by testing one full length bar in every twenty
bars for each size
c) Coating thickness over the whole of the coated bar section shall be determined
by sectioning and examining one bar in every twenty tonnes for each size.
d) For testing adhesion of coating, samples shall be selected from each size according to
the frequency given below:
For all types of bar : Minimum 1 for every diameter or as directed by engineer in charge
881 Reinforced 26.46 BDF 20 Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali Bd. F. 20 Page One One Square 937 158
Cement Concrete 50 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on Number 307 Metre
both side, fixing in cement mortar 1:3 and curing etc. complete
882 Reinforced 26.47 BDF 20 Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali Bd. F. 20 Page One One Square 1193 158
Cement Concrete 80 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on Number 308 Metre
both sides, fixing in cement mortar 1:3 and curing etc .complete.
883 Reinforced 26.58 BDF 41 Providing and laying Cast in situ/Ready Mix C.C. M-20 of trap metal for RCC rectangular Bd.F.6, Page One One Cubic Metre 15094 7149
Cement Concrete grid beam with slab as per detailed design and drawing, steel centering, formwork, Number300 /
cover blocks, laying/pumping, compacting, curing, finishing and roughening them to Bd.F.8, Page One
form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and Number302 and
even surface or roughening them if special finish is to be provided and curing B.7 Page One
complete (Excluding reinforcement and structural steel). with fully automatic micro Number 38.
processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete
Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade)
Page 194
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
884 Reinforced 26.60 BDF 41 Providing and laying Cast in situ/Ready Mix C.C. M-25 of trap metal for RCC rectangular Bd.F.6, Page One One Cubic Metre 15277 7149
Cement Concrete grid beam with slab as per detailed design and drawing or as directed including Number300 /
dewatering if necessary, steel centering, formwork, cover blocks, laying/pumping, Bd.F.8, Page One
compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to Number302 and
give smooth and even surface or roughening them if special finish is to be provided B.7 Page One
and curing complete (Excluding reinforcement and structural steel). with fully Number 38.
automatic micro processor based PLC with SCADA enabled reversible Drum Type
mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate
(Crushed sand VSI Grade)
885 Reinforced 26.62 BDF 41 Providing and laying Cast in situ/Ready Mix C.C. M-30 of trap metal for RCC rectangular Bd.F.6, Page One One Cubic Metre 15461 7149
Cement Concrete grid beam with slab as per detailed design and drawing or as directed including Number300 /
dewatering if necessary, steel centering, formwork, cover blocks, Bd.F.8, Page One
laying/pumping,compacting , curing , finishing and roughening them to form surface Number302 and
with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or B.7 Page One
roughening them if special finish is to be provided and curing complete (Excluding Number 38.
reinforcement and structural steel). with fully automatic micro processor based PLC
with SCADA enabled concrete batch mix plant (pan mixer). With fine aggregate (Crushed
sand VSI Grade)
886 Reinforced 26.64 BDF Providing and laying Cast in situ/Ready Mix C.C. M-35 of trap metal for RCC rectangular Bd.E.2 Page One One Cubic Metre 15549 7149
Cement Concrete grid beam with slab as per detailed design and drawing or as directed including Number 288 and
dewatering if necessary, steel centering, formwork, cover blocks, laying/pumping, B.7 Page No 38
compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to
give smooth and even surface or roughening them if special finish is to be provided
and curing complete (Excluding reinforcement and structural steel). with fully
automatic micro processor based PLC with SCADA enabled reversible Drum Type
mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate
(Crushed sand VSI Grade)
887 Reinforced 26.66 BDF 41 Providing and laying Cast in situ/Ready Mix C.C. M-40 of trap metal for RCC rectangular Bd.E.4 Page One One Cubic Metre 15827 7149
Cement Concrete grid beam with slab as per detailed design and drawing or as directed including Number 289 and B-
dewatering if necessary, steel centering, formwork, cover blocks, 7, Page One
laying/pumping,compacting, finishing the form surface with C.M. 1:3 of sufficient Number38
minimum thickness to give smooth and even surface or roughening them if special
finish is to be provided and curing complete (Excluding reinforcement and
structural steel). with fully automatic micro processor based PLC with SCADA
enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.
complete. With fine aggregate (Crushed sand VSI Grade)
Page 195
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
888 Reinforced 26.68 BDF Providing and fixing during laying in RCC Slab rectangular 2 mm thick M.S. sheet fan As directed by One Number 397 30
Cement Concrete hook box of size 180x100 mm with required depth with holes or notches as required, Engineer in charge
bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws
together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and
painting to exposed surface
Page 196
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
892 Brick Masonry 27.05 BDG 5 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in Bd.G.5 Page One One Cubic Metre 7994 1705
cement mortar 1:6 in superstructure including striking joints, raking out joints, Number 315
watering and scaffolding etc. Complete
893 Brick Masonry 27.06 BDG 7 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in Bd.G.7 Page One One Square 1119 203
cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement Number 316 Metre
of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third
course, properly bent and bonded at ends scaffolding, racking out joints and watering etc.
complete.
894 Brick Masonry 27.07 BDG 8 Providing Burnt Brick-on-edge masonry with second class bricks of conventional type Bd.G.8 Page One One Square 802 177
bricks in cement mortar 1:3 including mild steel longitudinal reinforcement of 2 Number 317 Metre
bars of 6mm diameter / one strips of hoop iron 25 mm X 1.6 mm placed at every third
course, properly bent and bonded at ends, scaffolding, raking out joints and watering etc
.complete.
895 Brick Masonry 27.08 BDG 9 Providing first class Burnt Brick masonry with conventional / I.S. type bricks in Bd.G.9 (a) Page One One Cubic Metre 9525 2704
cement mortar 1:4 including scaffolding, racking out joints pointing in C.M. 1:3 Number 317
and watering in pillars of rectangular or square shape as shown on the drawing or as
directed etc.complete.
896 Brick Masonry 27.09 BDG 9 Providing first class Brick masonry with conventional / IS. type bricks in cement mortar Bd.G.9 (b) Page One One Cubic Metre 11311 2908
1:4 including scaffolding, racking out joints pointing in C.M 1:3 and watering etc. in Number 317
pillars of curved shapes, as shown on the drawing or as directed etc. complete.
897 Brick Masonry 27.10 BDG 10 Providing second class Burnt Brick masonry with conventional / I.S. type bricks in Bd.G.10 (a) One Cubic Metre 8419 1966
cement mortar 1:4 including scaffolding, racking out joints and watering etc. in pillar of Page One Number
rectangular shapes as shown in the drawings or as directed complete. 318
Page 197
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
898 Brick Masonry 27.11 BDG 10 Providing second class Burnt Brick masonry with conventional / I.S. type bricks in Bd.G.10 (b) One Cubic Metre 10163 2144
cement mortar 1:4 including scaffolding, racking out joints and watering etc.in pillar of Page One Number
curved shapes as shown in the drawing or as directed complete. 318
899 Brick Masonry 27.12 BDG Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in As director by One Cubic Metre 6884 1588
foundation and plinth including bailing out water manually striking joints, racking out engineer in charge
joints watering and scaffolding etc. complete. and BDG-
2 and 5
900 Brick Masonry 27.13 BDG Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 As director by One Cubic Metre 7106 1705
in superstructure including striking joints, raking out joints, watering and engineer incharge
scaffolding etc. Complete and
BDG- 2 and 5
901 Brick Masonry 27.14 BDG Providing Second class fly ash brick masonry with conventional / I.S. type bricks in Bd. G. 7 Page 316 One Square 1012 203
cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement Metre
of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third
course, properly bent and bounded at ends scaffolding raking out joints and watering etc.
complete.
902 Brick Masonry 27.15 BDG Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 As directed by One Cubic Metre 7340 2080
(Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in engineer in charge
superstructure including striking joints, raking out joints and scaffolding etc. Complete.
(The test shall be carried out conforming to IS:6441 (Part I) - 1972)
903 Brick Masonry 27.16 BDG Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 As directed by One Square 1026 172
(Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in engineer in charge Metre
Half brick thick wall including striking joints, raking out joints and scaffolding etc.
Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)
Page 198
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
907 Stone Masonry 28.04 BDH 4 Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in Bd.H.4 Page One One Cubic Metre 5534 3022
cement mortar 1:6 in superstructure including racking out joints when plastering is Number 331
to be done / striking joints when no plastering is to be done on inside watering
and scaffolding
etc.complete.
908 Stone Masonry 28.05 BDH 5 Providing random rubble masonry second sort of trap / granite / quartzite / gneiss /jamba Bd.H.5 Page One One Cubic Metre 4734 2588
stones in cement mortar 1:6 in plinth including bailing out water manually , Number 331
striking joints on unexposed faces. (Excluding pointing) etc.complete.
909 Stone Masonry 28.06 BDH 6 Providing random rubble masonry second sort of trap / granite / quartzite / gneiss /jamba Bd.H.6 Page One One Cubic Metre 5423 2881
stones in cement mortar 1:6 in superstructure racking out joints when plastering is to be Number 332
done / striking joints when no pointing or plastering is to be done on the inside
watering and scaffolding etc.complete.
910 Stone Masonry 28.07 BDH 7 Providing random rubble masonry first sort of trap / granite / quartzite / gneiss Bd.H.7 Page One One Cubic Metre 5940 3398
/jamba stones in cement mortar 1:6 in external walls of plinth including bailing out water Number 332
manually , racking out joints when pointing is to be done and striking joints from
inside including watering etc.complete.
911 Stone Masonry 28.08 BDH 8 Providing random rubble masonry first sort of trap /granite / quartzite / gneiss Bd.H.8 Page One One Cubic Metre 6288 3720
/jamba stones in cement mortar 1:6 in superstructure including bailing out water Number 332
manually ,raking out joints from outside and striking joints when no pointing or
plastering is to be done from inside watering and scaffolding etc.complete.
Page 199
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
912 Stone Masonry 28.09 BDH 11 Providing coursed rubble masonry second sort of trap / granite / quartzite / gneiss stones Bd. H.11 Page One One Cubic Metre 11703 3214
in cement mortar 1:6 in external walls of plinth including bailing out water manually , Number 333
striking joints inside and raking out joints from outside and watering etc.complete
913 Stone Masonry 28.10 BDH 12 Providing coursed rubble masonry second sort of trap / granite / quartzite / gneiss stones Bd.H.12 Page One One Cubic Metre 12303 3729
in cement mortar 1:6 in superstructure including raking out joints when plastering is to be Number 333
done and striking joints when no plastering is to be done on the inside, watering
scaffolding etc.complete.
914 Stone Masonry 28.11 BDH 13 Providing coursed rubble masonry first sort of trap / granite / quartzite / gneiss Bd.H.13 Page One One Cubic Metre 12427 3938
stones in cement mortar 1:6 in external work of plinth including bailing out water Number 333
manually, striking joints inside and watering etc.complete.
915 Stone Masonry 28.12 BDH 14 Providing coursed rubble masonry first sort of trap / granite / quartzite / gneiss Bd.H.14 Page One One Cubic Metre 13274 4361
stones in cement mortar 1:6 in superstructure including racking out joints on the inside Number 333
when plastering is to be done, watering and scaffolding etc. complete.
916 Stone Masonry 28.13 BDH 40 Providing coursed rubble masonry first sort for pillars of trap / granite / quartzite Bd.H.40 Page One One Cubic Metre 12485 5782
/ gneiss stones in cement mortar 1:6 including pointing with cement mortar 1:3 Number 345
scaffolding and
watering etc.complete.
Page 200
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
921 Concrete Block 29.05 BDI Providing and constructing masonry in Autoclaved Areaclaved ( Celluar) Concrete Block As directed by One Cubic Metre 7765 1671
Masonry of aproved manufacturer confirming to IS 2185 Part III 1984 of size ( 625x240x225)mm Engineer in Charge.
in extra fine jointing mortar of fixoblock of in superstucture including,striking
joints,racking out joints watering and scaffolding etc.complete
922 Concrete Block 29.06 BDI Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block As directed by One Square 996 203
Masonry of aproved manufacturer confirming to IS 2185 Part III 1984 of size (625x 240x100)mm Engineer in Charge. Metre
in extra fine jointing mortar of fixoblock of in half brick thick wall including 2 hoop iron
strips 25mm x 1.6mm at every third course,properly bend and bonded at ends
scaffolding racking out joints and watering compete
923 Concrete Block 29.11 BDI Providing Green Build Product (GBP) Build Fast Plus masonry ecofriendly wet mix (As directed by One Square 1551 564
Masonry /Blocks laying Adhesive is a pre-polymerized, wet mix jointing adhesive which is Engineer in Charge) Metre
suitable for Building masonry walls with all kind of blocks with thickness of thin layer of
2mm to 4mm between masonry units. There is no need to pre-wet the Blocks nor to post
cure the wall with water.Confirming to IS 2185 of size 75 x 240x 650 mm in
superstructure including striking joints, racking outjoints faces and scaffolding etc.
complete.
Page 201
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
924 Concrete Block 29.12 BDI Providing Green Build Product (GBP) Build Fast Plus masonry ecofriendly wet mix As directed by One Square 1757 644
Masonry /Blocks of size 100 X 240 x 650 mm laying Adhesive is a pre-polymerized, wet mix Engineer in Charge. Metre
jointing adhesive which is suitable for Building masonry walls with all kind of blocks
with thickness of thin layer of 2mm to 4mm between masonry units. There is no need to
pre-wet the Blocks nor to post cure the wall with water.Confirming to IS 2185 of
size in superstructure including striking joints, racking out joints faces and scaffolding
etc. complete.
925 Concrete Block 29.13 BDI Providing Green Build Product (GBP) Build Fast Plus masonry ecofriendly wet mix As directed by One Square 2795 725
Masonry /Blocks of size 200 X 240 x 650 mm laying Adhesive is a pre-polymerized, wet mix Engineer in Charge. Metre
jointing adhesive which is suitable for Building masonry walls with all kind of blocks
with thickness of thin layer of 2mm to 4mm between masonry units. There is no need to
pre-wet the Blocks nor to post cure the wall with water.Confirming to IS 2185 of
size in superstructure including striking joints, racking out joints faces and scaffolding
etc. complete.
Page 202
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
928 Expansion Joint 30.03 BDK 1 Providing expansion joints in R.C.C. framed structure (at floor level) with premoulded Bd.K.1 Page One One Square 5128 1146
filler 25 mm thick and 3 mm thick aluminium plate as required, bitumen poured filler and Number 359 Metre
fixing T.W. battens on rear faces etc. complete as directed.
929 Expansion Joint 30.04 BDK 1 Providing expansion joints in R.C.C. framed structure (at terrace level) with premoulded Bd.K.1 Page One One Square 5014 1051
filler 25 mm thick and 3 mm thick aluminium plate as required, bituminous poured filler, Number 359 Metre
fixing lead, flashing on upper side and T.W. battens on inner face finishing etc. Complete
as directed.
930 Expansion Joint 30.05 BDK 1A Providing expansion joints in reinforced cement concrete framed structure (interior Bd K 1 A One Square 5662 1879
columns) with plain premoulded filler with confirming to IS 1838,1961, 25 mm Metre
thick with 75 mm wide and 1 mm thick stainless steel plate finishing etc. complete as
directed
931 Expansion Joint 30.06 BDK 1B Providing expansion joints in R.C.C. framed structure (exterior column) with Bd.K.1 B One Square 5935 1879
plain premoulded filler 25 mm thick with 75 mm wide and 1 mm thick stainless Metre
steel plate and finishing etc. complete.
932 Expansion Joint 30.07 BDK 1C Providing expansion joints in R.C.C. framed structure (at floor level) with plain Bd.K.1 C One Square 4561 744
premoulded filler 25 mm thick with 75 mm wide and 1 mm thick stainless steel plat Metre
and finishing etc. complete.
933 Expansion Joint 30.08 BDK 1D Providing expansion joints in R.C.C. framed structure (at Terrace level) with Bd.K.1 D One Square 4533 744
premoulded filler 25 mm thick with 40 mm wide and 1 mm thick stainless steel plate as Metre
required, bitumen poured filler and finishing etc. complete as directed.
934 Expansion Joint 30.09 BDK Providing and fixing of BITUFLEX CLOSE CELL FOAM of size 30 mm x 30 mm in As directed by One Running 2339 258
double layer in the expansion joints in R.C.C framed structure (at floor level / at Engineer in charge Metre
terrace level / interior columns) for overlapping of closed cell foam joints, applying
TP- 40 PRIMER on both the sides of concrete surface, filling the 25 mm x 25 mm gap
with the POLYDEE-41 highly flexible sealant and covering the joint with Polydee-LM,
150 mm width in 2 coats etc. complete.
Page 203
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
935 Expansion Joint 30.10 BDK Providing and fixing of BITUFLEX CLOSE CELL FOAM of size 30 mm x 30 mm in As directed by One Running 2287 189
double layer in the expansion joints in R.C.C. framed structure (Exterior column) with Engineer in charge Metre
closed cell foam , applying TP-40 PRIMER on both the sides of concrete surface, filling
the 25 mm x 25 mm gap with the POLYSEAL, highly flexible sealant and covering the
joint with Polydee- LM, 150 mm width in 2 coats and fixing the aluminium plate of 100
mm wide and 3 mm thick on external face of column etc. complete.Note- for item One
Number 9 and 10 Prior approval of Superintending Engineer is Necessary before
execution of work.
936 Expansion Joint 30.11 Providing and fixing bituminous pad 25mm thick for expansion joints in retaining As directed by One Square 1767 186
wall, compound wall etc. complete. Engineer in Metre
charge
Page 204
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
941 Water Proofing 31.05 BDJ Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. As directed by One Square 430 210
1:3 including using approved water proofing compound in specified proportion Engineer in charge. Metre
as per manufacturers specifications for per bag of cement including leveling, curing and
covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test
etc. complete.
942 Water Proofing 31.06 BDJ Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar As directed by One Square 387 238
1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. Engineer in charge. Metre
per bag of cement of approved make and manufacturer and curing etc. complete.
(Excluding Tiles) (As directed by Engineer in Charge)
Page 205
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
943 Water Proofing 31.07 BDJ Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar As directed by One Square 530 272
1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. Engineer in charge. Metre
per bag of cement of approved make and manufacturer and curing (and filling joints of
Nahani trap and any outlet by properly) etc. complete.
944 Water Proofing 31.08 BDJ Removing the tar or coba and disposing of the material as directed etc. complete. As directed by One Square 26 26
Engineer in charge. Metre
945 Water Proofing 31.09 BDJ Providing and applying water proofing treatment using acrylic polymer modified As directed by One Square 615 316
cement based water proofing coating with fibre glass mesh mixing at the rate of Engineer in charge Metre
powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with
two coat using approved chemicals for masonry and concrete surface by brush covering
7 years guarantee on Stamp Papers etc. complete.
946 Water Proofing 31.10 BDJ Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC As directed by One Square 1098 234
/ cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of Engineer in charge Metre
TP- 42 Primer on perfectly clean surface (free from loose dust and foreign matter)
application of 1st coat of Polydee-LM @ 700 gms/ One Square Metre and applying 2nd
coat of Polydee-LM @ 700 gms/ One Square Metre and finishing the same with
sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment
with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/
One Square Metre to be paid in separate item.) covering 7 years guarantee on Court Fee
Stamp Paper of Rs. 100/- etc. complete.
947 Water Proofing 31.11 BDJ Providing and applying a base coat comprising of 1KilogramPolydee-MC As directed by One Square 1267 234
and 1Kilogramfresh cement after wetting the surface followed by drying the surface for 2 Engineer in charge Metre
days, apply primer coat of TP-40 and after drying, applying Polydee-11 two
component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking
water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee
on Court Fee Stamp Paper of Rs. 100/- etc. complete.
948 Water Proofing 31.12 BDJ Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for Bd.J.2 Page One One Square 1286 393
basement or underground floor on a base of Cement concrete 1:3:6, including sub Number 355 Metre
base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae
proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the
joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and
cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc
complete. (excluding Cement concrete 1:3:6 base concrete )
Page 206
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
949 Water Proofing 31.13 BDJ Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment Bd.J.2 Page One One Square 1338 509
to vertical outside faces of Reinforced Cement concrete walls of basement or underground Number 355 Metre
floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with
cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift
method, brushing the joints horizontally with cement slurry mixed with water
proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement
mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water
proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with
ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete)
950 Water Proofing 31.14 BDJ Providing and laying perforated PVC 160 mm dia pipe in proper line,leveland slope As directed by One Running 1284 391
including necessary material fitting etc. complete. Engineer in Metre
charge
951 Water Proofing 31.15 BDJ Providing and applying required coats of a water based UV resistant Evercrete Top As directed by One Square 546 112
Seal sealant to protect natural stone, bricks, concrete and wooden structures from water Engineer in charge. Metre
intrusion and staining due to water penetration and algue formation etc complete
952 Water Proofing 31.16 BDJ Providing and applying required coats of a water based Evercrete Deep Penetrating As directed by One Square 845 125
Sealer (DPS) on cement concrete surface like roads, beams, and columns, plastered walls, Engineer in charge. Metre
basements, roofs, potable water tanks etc to react with cement and to penetrate concrete
structure thereby making it resistant to chemicals / chlorides water to make it dust proof
and to act as a water resistant at the same time which Strengthens the treated surface and
reduce the curing period etc complete. - Note -- for item One Number 7 to 4 prior
approval of Superintending Engineer will be necessary
953 Water Proofing 31.17 Providing water proofing treatment as per IS : 1346-1966 to generally inaccessible As directed by One Square 617 217
sloping Reinforced Cement Concrete Terrace slab with bitumen felts in all positions in Engineer in charge Metre
five course, consisting of applying cold bitumen primer coat at the rate of 2.5 litre per 10
One Square Metre., hot bitumen layer at the rate of 14.50Kilogramper 10 One Square
Metre. and over the same layer of bitumen felt of type III grade (I) as per IS: 1332-1965
across the slope with 10 cm overlap commencing at lowest level and again
applying hot bitumen course at the rate of 14.50Kilogramper 10 Square Metre.
and finally spreading over it grit at the rate of 14.50Kilogramper 10 Square Metre.
including all lifts, leads and scaffolding whenever necessary complete as directed
with four years' guarantee on requisite stamp paper etc. complete.
Page 207
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
954 Water Proofing 31.26 BDJ Providing waterproofing in W.C. and bath including brick bat coba in all position As directed by One Cubic Metre 6195 3352
including providing and laying 12mm bedding in cement mortor 1:3 on vergin Engineer in charge
concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying
brick bat coba of required thickness in cm 1:5 with waterproofing compound 1
Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick
bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement
and testing the treated portion for 48 hours by pond test and covering ten years' guarantee
on requisite stamp paper including curing etc. complete.
Page 208
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
964 Plastering and 32.12 BDL 8 Providing rough cast cement plaster externally in two coats to concrete, brick or Bd.L.8 Page One One Square 563 423
Pointing stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 Number 370 Metre
and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding
and fourteen days curing complete.
Page 209
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
965 Plastering and 32.13 BDL 9 Providing rough cast cement plaster externally in two coats with coloured cement Bd.L.9, Page One One Square 574 423
Pointing finish to concrete/ brick/ stone masonry surfaces in all positions with base coat 12 to 15 Number370 Metre
mm. thick in C.M. 1:4 using gray cement and rough cast treatment 12 mm thick in
proportion of 1:1 1/2:3 using colour pigment including scaffolding and fourteen days
curing etc. complete.
966 Plastering and 32.15 BDL 10 Providing neeru finish to plastered surfaces in all positions including scaffolding and Bd. L.10, Page One Square 65 56
Pointing curing etc. complete. One Number370 Metre
967 Plastering and 32.16 BDL 15A Providing flush grooved pointing with cement mortar 1:3 for brick work including Bd. L.15 Page One Square 173 155
Pointing scaffolding and curing etc. complete. One Number 372 Metre
968 Plastering and 32.17 BDL 15B Providing flush grooved pointing with cement mortar 1:3 for stone masonry work Bd. L.15 Page One Square 182 155
Pointing including scaffolding and curing etc. complete. One Number 372 Metre
969 Plastering and 32.18 BDL 16 Providing tuck pointing with cement mortar 1:3 for stone/Brick masonry Bd. L. 16 Page One Square 179 155
Pointing including scaffolding and curing etc. complete. One Number 373 Metre
970 Plastering and 32.19 BDL 17 Providing weathered pointing with cement mortar 1:3 for stone/ Brick masonary Bd. L. 17 Page One Square 179 155
Pointing including scaffolding and curing etc. complete. One Number 373 Metre
971 Plastering and 32.20 BDL 18 Providing vee pointing with cement mortar 1:3 for stone / Brick masonry including Bd. L. 18 Page One Square 173 155
Pointing scaffolding and curing etc. complete One Number 373 Metre
972 Plastering and 32.21 BDL Providing fine cement finish 1.5 mm thick over green plaster surface including As directed by One Square 72 57
Pointing scaffolding curing etc. complete. Engineer in Metre
charge.
973 Plastering and 32.22 BDL Labour charges for providing groove in external plaster having width and spaced as As directed by One Running 49 49
Pointing directed by engineer incharge etc. complete. Engineer in Metre
charge.
974 Plastering and 32.23 BDL Providing patti/ band 75mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 As directed by One Running 52 44
Pointing line and level including neat finishing scaffolding curing etc. complete. Engineer in Metre
charge.
975 Plastering and 32.24 BDL Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. As directed by One Running 67 57
Pointing 1:3 line and level including neat finishing scaffolding curing etc. complete. Engineer in Metre
charge.
976 Plastering and 32.25 BDL Providing patti/ band 150mm wide on plastered surface 12 mm to 15 mm thick in C.M. As directed by One Running 81 66
Pointing 1:3 line and level including neat finishing scaffolding curing etc. complete. Engineer in Metre
charge.
977 Plastering and 32.26 BDL Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction As directed by One Running 57 15
Pointing of R.C.C members and brick work, of approved quality including fixing mesh in Engineer in Charge: Metre
position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc.
complete.
978 Plastering and 32.27 BDL Providing and applying plaster with plaster of paris in 6mm thickness to previously As directed by One Square 144 79
Pointing plaster surface in all position including preparing the surface scaffolding etc. complete. Engineer in Charge. Metre
Page 210
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
979 Plastering and 32.28 BDL Providing and applying spray plaster made with finely graded marble and quartz in As directed by One Square 263 61
Pointing 2 mm thickness in two coats using putty knife or trowel to newly plaster fairly even Engineer in Charge. Metre
surface after minimum 30 days gap in all position including finishing the surface using
zero One Number sand paper or fine emry paper gently level the area by moving paper in
round circles removing the dust and clean the surface with dry cloth and scaffolding
including all materials and labour etc. complete.
980 Plastering and 32.29 BDL Providing and applying laying Aggregate plaster in granite / marble stones, as As directed by One Square 2556 689
Pointing decorative finish to give granite / marble like appearance to concrete, brick or Engineer in Charge. Metre
block surfaces in all position including preparation of surface smoothly, evenly by
racking of joints in case of Brick or block work including backing layer of 12 mm
thick with cement mortar 1:3 with 2% integral cement water proofing compound,
roughening for wall keying hardening and drying the surface for a minimum five days
gaps including second coat of cement lime mortar into a proportion 1:4 preparing the
surface for three coat of marble finish plaster giving a thin coat of white cement and two
parts of course calcite powder, applying the mortar with steel float on the surface in proper
evenness applying at coat of white cement and lime to set a smooth finish then applying
a thin coat of slurry made of white cement and black oxide colour in required
proportion by the steel float to get black streaks on the surface and curing the surface for
two days including all materials and labour etc. complete.
981 Plastering and 32.30 BDL Providing and applying plaster / wall punning with plaster of paris ( with plaster As directed by One Square 572 193
Pointing of paris material) in 10 to 13 millimeter thickness to previously plastered surface / or Engineer in charge. Metre
on newly brick surface ( Excluding rough cast plaster ) in all position including preparing
and Finishing the surface scaffolding etc.complete.
982 Plastering and 32.31 BDL Providing and applying gypsum plaster ( with Gypsum material ) with finishing with As directed by One Square 765 193
Pointing gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on Engineer in charge. Metre
newly brick surface ( Excluding rough cast plaster ) in all position including preparing and
Finishing the surface scaffolding etc.complete.
983 Plastering and 32.32 BDL Providing and applying Texture plaster with finishing with texture material of As directed by One Square 628 112
Pointing approved make in 3 to 4 millimeter thickness on previously plastered surface, including Engineer in charge. Metre
Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as
required, in all position including preparing the surface, scaffolding etc. complete.
984 Plastering and 32.33 BDL Removing the existing cement plaster of any thickness without causing dust As directed by One Square 52 52
Pointing nuisance and stacking the debris upto a distance of 50 metres or spreading in the Engineer in charge. Metre
compound and cleaning the site etc. complete.
Page 211
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
985 Plastering and 32.34 BDL Providing and applying Two coats of wall care Putty on plastered surface and Ceiling As directed by One Square 90 52
Pointing and Walls to prepare surface even and smooth of approved make, etc complete. Engineer in Metre
charge.
986 Plastering and 32.36 BDL Providing cement patta / band of 2.50 cm width on either side of edges of plaster for doors As directed by One Square 40 32
Pointing and windows including scaffolding ,finishing, curing etc. complete. Engineer in charge. Metre
987 Plastering and 32.37 BDL Providing groove to required size at specified location as directed by Engineer, at junction As directed by One Running 40 40
Pointing of brick masonry wall and R.C.C beams or Column, at junction of composite masonry, Engineer in charge. Metre
including scaffolding, finishing, curing etc. complete.
Page 212
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
989 Paving Flooring 33.02 BDM 1A Providing and laying Rough Shahabad Stone Flooring 40mOne Metric Tonneo 45 mm. Bd.M.1 Page One One Square 791 299
and dado thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including Number 379 Metre
cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. etc.
complete
990 Paving Flooring 33.03 BDM 1B Providing and laying Rough Shahabad Stone Flooring 50mm to 60mm thick and of Bd.M.1 Page One One Square 900 312
and dado required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, Number 379 Metre
striking joints, pointing in cement mortar 1:3 curing and cleaning etc. etc. complete.
991 Paving Flooring 33.04 BDM 3 Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and Bd.M.3 Page One One Square 826 292
and dado required width wide in plain/ diamond pattern on a bed of 1:6 C.M. including Number 380 Metre
cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc.
complete.
992 Paving Flooring 33.05 BDM 3A Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width Bd.M.3 Page One One Square 1078 368
and dado in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with Number 380 Metre
neat cement slurry, curing, polishing and cleaning etc. complete.
993 Paving Flooring 33.06 BDM 3B Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm Bd.M.3 Page One One Square 1247 281
and dado thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including Number 380 Metre
cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc.
complete.
994 Paving Flooring 33.07 BDM Providing and laying handcut polished Kotah Stone flooring 25mm to 30mm thick and Bd.M.3 Page One One Square 1225 281
and dado 30cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling Number380 Metre
joints with neat cement slurry, curing, polishing and cleaning etc. complete.
995 Paving Flooring 33.08 BDM Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and Bd.M.3 Page One One Square 1298 281
and dado 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, Number380 Metre
filling joints with neat cement slurry, curing, polishing and cleaning complete.
996 Paving Flooring 33.09 BDM 7 Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete Bd.M.7 Page One One Square 536 308
and dado laid to proper level and slope in alternate bays including compaction, filling joints, Number 383 Metre
marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid
diagonally /square etc finishing smooth (with extra cement) in any colour as directed and
curing etc. complete.with Crushed sand VSI Grade
Page 213
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
997 Paving Flooring 33.10 BDM 7 Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete Bd.M.7 Page One One Square 494 308
and dado laid to proper level and slope in alternate bays including compaction, filling joints, Number 383 Metre
marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid
diagonally/ square etc finishing smooth (with extra cement) in any colour as directed and
curing etc. complete. With Crushed Sand.
998 Paving Flooring 33.11 BDM 6 Providing and laying cement concrete flooring 40mm thick with M20 cement concrete Bd.M.6 Page One One Square 537 308
and dado laid to proper level and slope in alternate bays, including compaction, filling joints, Number 381 Metre
marking lines to give appearance of tiles of 30cm x 30cm or other size laid
diagonally/square etc. finishing smooth (with extra cement) in any colour as directed and
Curing etc. complete. With Crushed sand VSI Grade
999 Paving Flooring 33.12 BDM 6 Providing and laying cement concrete flooring 40mm thick with M20 cement concrete Bd.M.6 Page One One Square 534 308
and dado laid to proper level and slope in alternate bays, including compaction, filling joints, Number 381 Metre
marking lines to give appearance of tiles of 30cm x 30cm or other size laid
diagonally/square etc. finishing smooth (with extra cement) in any colour as directed and
Curing etc. complete. With Crushed sand VSI Grade
1000 Paving Flooring 33.13 BDM 7A Providing and laying cement concrete flooring 50 mm thick with M15 cement concrete Bd.M.7 Page One One Square 581 308
and dado laid to proper level and slope in alternate bays including compaction filling joints, Number 383 Metre
marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/
square etc finishing smooth (with extra cement) in any colour as directed and curing etc.
complete.with Crushed sand VSI Grade
1001 Paving Flooring 33.14 BDM 7A Providing and laying cement concrete flooring 50 mm thick with M15 cement concrete Bd.M.7 Page One One Square 568 308
and dado laid to proper level and slope in alternate bays including compaction filling joints, Number 383 Metre
marking lines to give the appearance of tiles of 30cm x 30cm or other size laid
diagonally/square etc finishing smooth (with extra cement) in any colour as directed and
curing etc. complete. With Crushed Sand.
1002 Paving Flooring 33.15 BDM 6A Providing and laying cement concrete flooring 50mm thick with M20 cement concrete Bd.M.6 Page One One Square 594 308
and dado laid to proper level and slope in alternate bays including compaction, filling joints, Number 381 Metre
marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/
square etc. finishing smooth (with extra cement) in any colour as directed and curing etc.
complete.with Crushed sand VSI Grade
1003 Paving Flooring 33.16 BDM 6A Providing and laying cement concrete flooring 50mm thick with M20 cement concrete Bd.M.6 Page One One Square 483 211
and dado laid to proper level and slope in alternate bays including compaction, filling joints, Number 381 Metre
marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/
square etc. finishing smooth (with extra cement) in any colour as directed and curing etc.
complete. With Crushed Sand.
1004 Paving Flooring 33.17 BDM 22 Providing and laying machine cut machine polished shahabad Stone slabs 20 to 25mm Bd.M.22 Page One One Square 1125 572
and dado thick for treads and risers of steps and staircases, with rounded nosing for the treads on a Number 390 Metre
bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry,
curing, polishing and cleaning etc. complete.
Page 214
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1005 Paving Flooring 33.18 BDM 22B Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 Bd.M.22 Page One One Square 1572 572
and dado mm thick for treads and risers of steps and staircases, with rounded nosing for the treads Number 390 Metre
on a bed of 1:4 cement mortar including cement float, filling joints with neat cement
slurry, curing, polishing and cleaning etc. complete.
1006 Paving 33.19 BDM 29B Providing sills of polished Kota stone 25 mm to 30mm thick, on a bed of 1:4 cement Bd.M.29 Page One One Square 1289 336
Flooring and mortar including cement float, filling joints with slurry, curing,moulding edges, Number 391 Metre
dado polishing and cleaning etc. complete.
1007 Paving Flooring 33.20 BDM 29C Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 Bd.M.29 Page One One Square 1084 336
and cement mortar including cement float, filling joints with slurry, curing polishing and Number 391 Metre
dado cleaning etc. complete.
1008 Paving Flooring 33.21 0 Providing sills of required material 20mm to 25mm thick, on a bed of cement Spec.One Number: One Square 2149 336
and dado mortar 1:4 including cement float, filling joints with neat cement slurry, curing, Bd.M.31/Page One Metre
polishing, moulding edges, cleaning complete. a) Marble other than white makrana Number392
1009 Paving Flooring 33.22 0 Providing sills of required material 20mm to 25mm thick, on a bed of cement Spec.One Number: One Square 3886 336
and dado mortar 1:4 including cement float, filling joints with neat cement slurry, curing, Bd.M.31/Page One Metre
moulding edges, polishing,cleaning complete. b) Granite Number393
1010 Paving Flooring 33.23 BDM 15 Providing and fixing black kadappa stone as shelves 25mm. thick machine Bd.M.29 Page One One Square 1221 381
and dado polished, extending the polish upto 20 cm width on lowerside, rounding corners, Number 391 Metre
laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc.
complete.
1011 Paving Flooring 33.24 BDM 12 Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming Bd.M.12 Page One One Square 1182 355
and dado to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position Number 385. Metre
laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour
cement slurry cleaning curing etc. complete.
1012 Paving Flooring 33.25 BDM 13 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and Bd.M.13 Page One One Square 1255 434
and dado confirming to corresponding I.S. for dado and skirting in required position with Number 386. Metre
readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including
joint filling with white/ colour cement slurry cleaning curing etc. complete.
1013 Paving Flooring 33.26 BDM 13 Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to Bd.M.13 Page One One Square 1278 431
and dado corresponding I.S. for dado and skirting in required position with readymade adhesive Number 386. Metre
mortar of approved quality on plaster of 1:2 cement mortar including joint filling with
white/ colour cement slurry cleaning curing etc. complete.
1014 Paving Flooring 33.27 BDM 13 Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to Bd.M.13 Page One One Square 1392 434
and dado corresponding I.S. for dado and skirting in required position with readymade adhesive Number 386. Metre
mortar of approved quality on plaster of 1:2 cement mortar including joint filling with
white/ colour cement slurry cleaning curing etc. complete.
Page 215
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1015 Paving Flooring 33.28 BDM Providing Mirror polishing to Kota Stone including using all necessary stones and As directed by One Square 149 36
and dado equipments cleaning, washing etc. complete. For Flooring Engineer in charge. Metre
1016 Paving Flooring 33.29 BDM Providing Mirror polishing to Kota Stone including using all necessary stones and As directed by One Running 79 36
and equipments cleaning, washing etc. complete. For Skirting Engineer in Metre
dado charge.
1017 Paving Flooring 33.30 BDM Providing and laying in situ cement concrete M20 with tremix treatment for 100 As directed by One Square 796 191
and mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with Engineer in Metre
dado necessary refilling with bitumen etc. complete. charge
1018 Paving Flooring 33.31 BDM Providing and laying in situ cement concrete M30 with tremix treatment for 200 As directed by One Square 1464 346
and mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with Engineer in Metre
dado necessary refilling with bitumen etc. complete. charge
1019 Paving Flooring 33.32 BDM 35 Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of Bd.M.35 B/P One Square 988 332
and dado approved quality including giving required size and shape etc. Fixing in cement mortar One Number393 Metre
1:3 curing and cement etc. complete. a) One side polish
1020 Paving Flooring 33.33 BDM 35 Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of Bd.M.35 B/P One Square 1159 332
and dado approved quality including giving required size and shape etc. Fixing in cement mortar One Number393 Metre
1:3 curing and cement etc. complete. b) Both side polish
1021 Paving Flooring 33.34 BDM 3 Providing and laying in position flooring of telephone black / Amba White / Cat bary Bd.M. 3 B/Page One Square 4024 332
and dado brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 One Number 380 Metre
mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in
C.M. 1:3 curing and cleaning etc. complete.
1022 Paving Flooring 33.35 BDM 22 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone Bd. M.22 One Square 4172 438
and dado black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads B/Page One Number Metre
and risers of steps and staircases of approved colour and shade with full moulding and 390
three grooved line for the treads on bed of 1:4 Cement mortar including float filling
joints with neat cement slurry curing polishing and cleaning etc. complete.
1023 Paving Flooring 33.36 BDM 35 Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone Bd.M.35 B/Page One Square 4019 332
and dado black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone One Number393 Metre
partition with full moulding the edges etc. complete . Both side polish
1024 Paving Flooring 33.37 BDM 35 Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black Bd.M.35 B/Page One Square 4010 332
and dado / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition One Number393 Metre
with full moulding the edges etc. complete. One side polish
Page 216
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1025 Paving Flooring 33.38 BDM 35 Providing and preparing kitchen otta up to 75 cm width,made up from 30 mm thick and Bd.M.35C / One Square 2812 395
and dado 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished Page One Number Metre
kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia 393
patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement
mortar and araldite curing polished and cleaning etc. complete.
1026 Paving 33.39 BDM 35 Providing and fixing 1.5 mm thick polyvenyl venyl chloride flooring including leveling Bd.M.35C / One Square 641 166
Flooring and the base with white cement including pasting with appropriate material cleaning the Page One Number Metre
dado surface etc. complete 393
1027 Paving Flooring 33.40 BDM 12 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 Bd.M. 12 Page One One Square 1177 273
and dado mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. Number385 Metre
15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required
position laid on a bed of 1:4 cement mortar including neat cement float, filling
joints, curing and clearing etc. complete.
1028 Paving Flooring 33.41 BDM 12 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm Bd.M. 12 Page One One Square 1252 352
and dado x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Number385 Metre
Bla) of approved make, shade and pattern for dado and skirting in required position fixed
in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc.
complete
1029 Paving Flooring 33.42 BDM 12 Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 Bd.M.12 Page One One Square 1600 273
and dado mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of Number 385 Metre
approved make, shade and pattern for flooring in required position laid on a bed
of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc.
complete.
1030 Paving Flooring 33.43 BDM 12 Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 Bd.M.12 Page One One Square 1675 352
and dado mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of Number 385 Metre
approved make, shade and pattern for dado and skirting in required position fixed
in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc.
complete.
1031 Paving Flooring 33.44 BDM 12 Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 Bd.M.12 Page One One Square 1769 355
and dado mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 Number 385 Metre
(Group Bla) of approved make, shade and pattern for flooring in required position
laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing
and cleaning etc. complete.
Page 217
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1032 Paving Flooring 33.45 BDM 12 Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 Bd.M.12 Page One One Square 1844 434
and dado mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 Number 385 Metre
(Group Bla) of approved make, shade and pattern for dado and skirting in required
position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and
cleaning. etc. complete.
1033 Paving Flooring 33.46 BDM 12 Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 Bd.M. 12 Page One Square 1769 355
and dado to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of One Number 385 Metre
approved make, shade and pattern for flooring in required position laid on a bed of 1:4
cement mortar including required position laid on a bed of 1:4 cement mortar including
neat cement float, filling joints, curing and cleaning etc. complete
1034 Paving Flooring 33.47 BDM 12 Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 Bd.M. 12 Page One Square 1844 434
and dado to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of One Number 385 Metre
approved make, shade and pattern for dado and skirting in required position fixed in 1:4
cement mortar including required position laid on a bed of 1:4 cement
mortarincluding neat cement float, filling joints, curign and cleaning etc. complete.
1035 Paving Flooring 33.48 BDM 12 Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ Bd. M. 12 One Square 2367 318
and dado window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / Metre
moulding the sharp edges wherever necessary, curing, etc. complete.
1036 Paving Flooring 33.49 BDM Providing and fixing heavy duty inter locking concrete Grey paving blocks of 60 A directed by One Square 840 100
and dado mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and Engineer in charge Metre
shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and
cleaning etc. complete.
1037 Paving Flooring 33.50 BDM Providing and fixing heavy duty inter locking concrete Grey paving blocks of 80 A directed by One Square 1032 100
and dado mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and Engineer in charge Metre
shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and
cleaning etc. complete.
1038 Paving Flooring 33.51 BDM Providing and fixing heavy duty inter locking concrete Coloured paving blocks of A directed by One Square 919 100
and dado 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and Engineer in charge Metre
shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and
cleaning etc. complete
1039 Paving Flooring 33.52 BDM Providing and fixing heavy duty inter locking concrete Coloured paving blocks of As directed by One Square 1166 100
and dado 80 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and Engineer in charge Metre
shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and
cleaning etc. complete
Page 218
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1040 Paving Flooring 33.53 BDM 12 Providing and fixing heavy duty inter locking concrete RUBBER MOULD Bd. M-12 page One One Square 1096 100
and dado GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Number 385 Metre
Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30
millimeter thick including striking joints and cleaning etc. complete. (using 100%
crushed sand)
1041 Paving Flooring 33.54 BDM Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving Bd. M. One Square 1401 100
and dado blocks of 80 mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved Metre
quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints
and cleaning etc. complete. (using 100% crushed sand)
1042 Paving Flooring 33.55 BDM Providing and fixing heavy duty inter locking concrete Coloured paving blocks of As directed by One Square 842 100
and dado 40 mm thickness of having a strength of 200 Kilogram/Sq.cm. of approved quality and Engineer in charge Metre
shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and
cleaning etc. complete.
1043 Paving Flooring 33.56 BDM Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 As directed by One Square 720 158
and dado coats of different bits to receive rough and matt finish including buffing process before Engineer in charge Metre
laying and fixing of stone as per drawing and design, including cleaning, washing
and finishing etc. complete.
1044 Paving Flooring 33.57 BDM Providing leather finished polishing to Kota / Marble / Shahabad / Kadappa Stone slab As directed by One Square 608 158
and dado by continuous grinding in 4 coats of different bits to receive rough and matty finish Engineer in charge Metre
including buffing process before laying and fixing of stone as per drawing and
design, including cleaning, washing and finishing etc. complete.
1045 Paving Flooring 33.58 BDM 12 Providing and laying Vitrified mirror/glossy finish having decorative type of size Bd. M-12 page One One Square 1217 156
and dado 590 millimeter to 605 millimeter x 590 millimeter to 605 millimeter of 8 to 10 millimeter Number 385 Metre
thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-
2006 (Group Bla) of approved make shade and pattern for flooring in required position
laid on a bed of bonding chemical filling joints curing and cleaning etc . complete.
1046 Paving Flooring 33.59 BDM 12 Providing and laying Vitrified MATT finish having decorative type of size 600 Bd. M-12 page One One Square 1636 156
and dado millimeter x 600 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with Number 386 Metre
bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make
shade and pattern for flooring in required position laid on a bed of bonding
chemical filling joints curing and cleaning etc .complete.
Page 219
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1047 Paving Flooring 33.61 BDM 12 Providing and laying Vitrified MATT finish having decorative type of size 1000 Bd. M-12 page One One Square 2223 156
and dado millimeter x 1000 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with Number 388 Metre
bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make
shade and pattern for flooring in required position laid on a bed of bonding
chemical filling joints curing and cleaning etc .complete.
1048 Paving Flooring 33.62 BDM 12 Providing and laying Vitrified RUSTIC MATT STONE finish having decorative type Bd. M-12 page One One Square 1761 195
and dado tiles of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness (on a Number 386 Metre
existing flooring) with bonding chemical and confirming to IS 15622-2006 (Group
Bla) of approved make shade and pattern for flooring in required position laid on a bed
of bonding chemical filling joints curing and cleaning etc. complete.
1049 Paving Flooring 33.65 BDM 12 Providing and laying Vitrified STONE EFFECT FINISH having decorative type tiles of Bd. M-12 page One One Square 1805 195
and dado size 590 millimeter to 605 millimeter x 590 millimeter to 605 millimeter of 8 to Number 385 Metre
10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to
IS 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required
position laid on a bed of bonding chemical filling joints curing and cleaning etc. complete.
1050 Paving Flooring 33.66 BDM Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, Bd. M-12 page One One Square 735 197
and dado confirming to corresponding I.S. for flooring in required position laid on a bed of Number 385 Metre
1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing
etc. complete.
1051 Paving Flooring 33.67 BDM Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm Bd. M-12 page One One Square 1200 355
and dado and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position Number 385 Metre
laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry
cleaning curing etc. complete.
1052 Paving Flooring 33.68 BDM Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / As directed by One Square 4386 679
and dado Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing Engineer-In- Charge Metre
etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the
sharp edges wherever necessary, curing, etc. complete.
1053 Paving Flooring 33.75 BDM Providing and laying Polished Kota stone flooring With Hand-Cut Polished Kota Bd. M-3 page One One Square 1583 479
and dado Stones 25mm to 30mm thick and required width in plain/diamond pattern on bed Number 380 Metre
of 1:6 Cement mortar including cement float, filling joints with neat cement slurry,
curing, cleaning and Mirror Polishing etc. complete Note- Water absorption for kota
stone should not exceed 0.05%.( Item to be used with prior permission of
Superintending Engineer )
Page 220
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1054 Paving Flooring 33.76 BDM Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty As directed by One Square 1102 355
and dado designer cement concrete tiles for Flooring of approved colour and design 22 +/ -2 Engineer-In- Char Metre
mm thick bayer colour pigmented as per IS ..1237 - 1980 having compressive
strength more than 500 Kilogram/sq.cm reaffirmed in 2006 ,having wert transvrse
strenghth of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance
less than 2 mm ,skid resistance more than
25.0 (ASTM:E303) and no fading as per DIN - 51094 of size 300 x 300 in plan /
designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with
neat cement slurry ,curing, polishing and cleaning etc. complete. For flooring.
1055 Paving Flooring 33.77 BDM Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty As directed by One Square 1175 434
and dado designer cement concrete tiles for steps and dado of approved colour and design 22 +/ -2 Engineer-In- Char Metre
mm thick bayer colour pigmented as per IS 1237 - 1980 reaffirmed in 2006
,having wert transvrse strenghth of 3.5 / mm 2, water absorption less than 10 % abrasion
/ wear resistance less than 2 mm ,skid resistance more than 25.0 (ASTM:E303) and no
fading as per DIN - 51094 in plan / designed pattern on a bed of 1:4 cement mortar
including cement float ,filling joints with neat cement slurry ,curing,polished and cleaning
etc. complete. For steps, and dado
1056 Paving Flooring 33.78 BDM Machine polishing to cement/marble mosaic tiled flooring or any other type of As directed by One Square 177 149
and flooring including cleaning, washing, etc. complete. Engineer in Metre
dado Charge
1057 Paving Flooring 33.79 BDM Hand polishing to dado, skirting including cleaning, washing etc. complete. As directed by One Square 79 74
and Engineer in Metre
dado Charge
1058 Paving Flooring 33.80 BDM Providing wax polishing to floors and dado, preparing the surface, scaffolding etc. As directed by One Square 441 223
and complete. Engineer in Metre
dado Charge
1059 Paving Flooring 33.81 BDM Providing and fixing in required position skirting or dado of polished Kotah Stone slab As directed by One Square 1344 366
and dado 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including Engineer in Charge Metre
cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning
complete.
Page 221
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1061 Wood Finish 34.02 BDN 1.1 Providing and applying boiled linseed oil in two coats to the new wood work, Bd.N.1.1 Page One One Square 44 31
including knotting, preparing the surface, scaffolding etc. complete as directed. Number 399 Metre
1062 Wood Finish 34.03 BDN 1.2 Providing and applying Wax polish to the new wood work including knotting, preparing Bd.N.1.2 Page One Square 56 47
the surface, scaffolding etc. complete as directed. One Number 399 Metre
1063 Wood Finish 34.04 BDN 1.2 Providing and applying Wax polish to the old wood work including knotting, preparing Bd. N. 1.2 Page One One Square 45 31
the surface, scaffolding etc. complete as directed. Number 399 Metre
1064 Wood Finish 34.05 BDN 1.3 Providing and applying French polish for required finish on previously polished Bd.N.1.3 Page One One Square 123 89
wood including knotting, preparing the surfaces, scaffolding etc. complete as directed Number 399 Metre
1065 Wood Finish 34.06 BDN 1.3 Providing and applying french polish to new wood work, for required finishing Bd.N.1.3 Page One One Square 241 192
including. knotting, preparing the surfaces, scaffolding etc. complete as directed. Number 399 Metre
1066 Wood Finish 34.07 BDN 1.4 Providing and applying varnish in one coat on previously varnished wood work Bd.N.1.4 Page One One Square 41 22
including knotting, preparing the surface, scrapping, scaffolding, etc. complete. Number 400 Metre
1067 Wood Finish 34.08 BDN 1.4 Providing and applying Varnish in two coats on new wood work including Bd.N.1.4 Page One Square 64 31
knotting, preparing the surface, scaffolding etc. Complete. One Number 400 Metre
1068 Wood Finish 34.09 BDN Providing and applying melamine polish of required finish to the wood work by As directed by One Square 829 546
spray machine including knotting and preparing the even surface by scraping, Engineer-in charge. Metre
applying French polish , scaffolding if required etc. complete.
Note:The work to be executed on prior approval of Superintending Engineer will be
necessary.
1069 Wood Finish 34.10 BDN Providing and applying coal tar in one coat on previously coal tarred wood As directed by One Square 67 38
including preparing the surface, scaffolding etc. complete. (coal tar shall be minimum Engineer-in charge. Metre
300 grams per One Square Metre.)
1070 Wood Finish 34.11 BDN Providing and applying coal tar in two coats on new wood work including As directed by One Square 105 56
preparing the surface, scaffolding etc. complete. (coal tar shall be minimum 500 grams Engineer-in Metre
per One Square Metre.) charge.
Page 222
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1072 Oil Painting 35.02 BDO 2 Providing and applying one coat of lead/zinc base oil paint/ bituminous paint of Bd.0.2 Page One One Square 46 16
approved colour and shade to old wood work previously painted and fiber boards Number 404 Metre
including if necessary scaffolding, preparing surface excluding primer coat etc. complete.
1073 Oil Painting 35.03 BDO 2A Providing and applying two coats of lead/zinc base oil paint/bituminious paint of Bd.0.2 Page One One Square 72 32
approved colour and shade to old wood work and fiber boards previously painted Number 404 Metre
including if necessary scaffolding, preparing the surface excluding priming coat etc.
complete.
1074 Oil Painting 35.04 BDO 3 Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of Bd.0.3 Page One One Square 89 35
approved colour to new structural steel work and iron work in buildings including Number 404 Metre
scaffolding if necessary, cleaning and preparing the surface etc. complete. (excluding
primer coat).
1075 Oil Painting 35.05 BDO 4 Providing and applying one coat of aluminium paint of approved make to new structural Bd.O.4 Page One One Square 86 27
steel work in building and workshop including scaffolding if necessary, cleaning Number 405 Metre
and preparing surface (excluding primer coat) etc. complete.
1076 Oil Painting 35.06 BDO 4A Providing and applying 2 coats of alluminium paint of approved make to new structural Bd.0.4 Page One One Square 128 47
steel work in buildings and workshops including scaffolding if necessary, cleaning and Number 405 Metre
preparing the surface (excluding primer coat)etc. complete.
1077 Oil Painting 35.07 BDO 5 Providing and applying two coats of synthetic enamel paint of approved colour to new Bd.O.5 Page One One Square 96 47
/old structural steel work and wood work in buildings, including scaffolding if necessary, Number 405 Metre
cleaning and preparing the surface (excluding primer coat) etc. complete.
1078 Oil Painting 35.08 BDO 6 Providing and applying one coat of flat oil paint of approved colour to the old structural Bd.0.6 Page One One Square 57 25
steel work and iron work previously painted in building including scaffolding, if Number 406 Metre
necessary, cleaning and preparing surface (excluding primer coat) etc. complete.
1079 Oil Painting 35.09 BDO 6A Providing and applying two coats of flat oil paint of approved colour to the old structural Bd.0.6 Page One One Square 85 47
steel work and iron work previously painted in building including scaffolding, if Number 406 Metre
necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.
Page 223
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1080 Oil Painting 35.10 BDO 7 Providing and applying one coat of flat oil paint of approved colour and shade to internal / Bd.0.7 Page One One Square 53 25
external plastered surfaces including scaffolding if necessary, cleaning and preparing Number 406 Metre
the surface (excluding primer coat) etc. complete.
1081 Oil Painting 35.11 BDO Providing and applying two coats (exterior quality) of flat oil paint of approved colour As directed by One Square 88 44
and shade to the plastered surface in buildings and workshops including scaffolding if Engineer- in- charge. Metre
necessary, cleaning the surface and preparing surface etc. complete. (excluding primer
coat)
1082 Oil Painting 35.12 BDO 7A Providing and applying two coats of flat oil paint of approved colour and shade to internal Bd.O.7 Page One One Square 101 44
/ external plastered surfaces including scaffolding if necessary, cleaning and Number 406 Metre
preparing the surface (excluding primer coat) etc. complete.
1083 Oil Painting 35.13 BDO 8 Providing and applying two coats of water proof cement paint of approved manufacture Bd.0.8 Page One One Square 79 51
and of approved colour to the plastered surfaces including scaffolding if necessary, Number 406 Metre
cleaning and preparing the surface, watering for two days etc. complete.
1084 Oil Painting 35.14 BDO Providing and applying two coats of water proof cement paint of approved manufacture As directed by One Square 78 50
and of approved colour to old plastered surfaces including scaffolding if necessary, Engineer- in- charge. Metre
cleaning and preparing the surface, watering for two days etc. complete.
1085 Oil Painting 35.15 BDO Providing and applying three coats of water proof cement paint of approved manufacture Spec.One Number: One Square 104 67
and of approved colour to new plastered surfaces including scaffolding if necessary, Bd.O.8/Page One Metre
cleaning and preparing the surface, watering for two days etc. complete. Number406
1086 Oil Painting 35.16 BDO Providing and applying three coats of water proof cement paint of approved manufacture Spec.One Number: One Square 97 67
and of approved colour to old plastered surfaces including scaffolding if necessary, Bd.O.8/Page One Metre
cleaning and preparing the surface, watering for two days etc. complete. Number406
1087 Oil Painting 35.18 BDO 8B Removing old paint from steel and other metal surfaces and making the surfaces even As directed by One Square 17 17
with hand scrapping, scaffolding etc. complete. Engineer in Metre
charge.
1088 Oil Painting 35.19 BDO 8C Providing and applying priming coat over new wood and wood based surfaces, As directed by One Square 34 13
including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign Engineer in charge. Metre
matter, sand papering and knotting, scaffolding etc. complete.
1089 Oil Painting 35.20 BDO 8D Providing and applying priming coat over new/old steel and other metal surfaces As directed by En- One Square 37 19
including preparing the surface by thoroughly cleaning oil, grease, dirt and other gineer in charge. Metre
foreign matter and scoured with wire brushes, fine steel wool, scrappers and sand
paper, scaffolding etc.
complete.
Page 224
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1090 Oil Painting 35.21 BDO 8E Providing and applying priming coat on concrete/ masonary/ Asbestos Cement As directed by One Square 36 12
plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly Engineer in charge. Metre
cleaning oil, grease, dirt and other foreign matter and sand papering as required etc.
complete.
1091 Oil Painting 35.22 BDO 8F Providing and applying one coat of seal cement primer of approved manufacture and As directed by One Square 22 16
shed including scaffolding preparing the surface by cleaning dirt and other foreign Engineer in charge. Metre
matters, scrapping if necessary including scaffolding etc. complete.
1092 Oil Painting 35.23 BDO Providing and applying pearl/ luster finish paint of approved colour and shade to the As directed by One Square 216 69
existing plaster surface including scaffolding, preparing the surface, applying the acrylic Engineer in Metre
wall putti etc. charge.
complete.
1093 Oil Painting 35.24 BDO Providing and applying two coats of textured synthetic paint of approved shade and As directed by One Square 163 28
quality and one coat of primer before applying textured paint including scaffolding Engineer in charge. Metre
if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials
as required, etc. complete.
1094 Oil Painting 35.25 BDO Providing and applying two coats of exterior acraylic emulsion paint confirming As directed by One Square 261 172
to corresponding I.S. of approved manufacture and of approved colour to the plastered Engineer in charge. Metre
surfaces including cleaning ,preparing the plaster surface, applying primer coat
,scaffolding if necessary , and watering the surface for two days etc complete.
1095 Oil Painting 35.26 BDO Providing and applying two coats of exterior weather shield paint of approved As directed by One Square 295 172
manufacture and of approved colour to the plastered surfaces including cleaning Engineer in charge. Metre
,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and
watering the surface for two days etc complete. NOTE: For
Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary
Page 225
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1096 Oil Painting 35.29 BDO Providing and applying external raincoat painting with crack filling acrylic polymer As directed by One Square 259 31
based chemical compound coating to the external surface of walls to prevent water Engineer in charge. Metre
seepage in the masonry walls during monsoon added with required shade Steiner to give
required shade to the surface in two coats. Including providing three coat of priming of
polymer base primer including preparing surface scrapping the existing loose old paint,
removing loose particles of sand on the surface opening and cleaning the cracks
developed in the external plaster, removing loose particles by chiseling, filling
cracks by chemicals compound of approved make with proper penetration etc.
Coating of Raincoat with the help of brush and as per instructions and specification
given by manufacturer and with instruction from Engineer in- charge. Work shall be
executed by certified applicator only and covering gurantee of 3 years on court stamp
paper of Rs. 500/- and necessary testing etc. complete.
Page 226
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1103 Colouring 36.08 BDP 4 Providing and applying washable powder distemper of approved colour and shade to old Bd.P.4 Page One One Square 19 6
and new surfaces in one coat including scaffolding, preparing the surfaces (excluding the Number 413 Metre
priming coat)etc. complete.
1104 Colouring 36.09 BDP 4A Providing and applying washable powder distemper of approved colour and shade to old Bd. P.4 Page One One Square 29 13
and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding Number 413 Metre
the primer coat) etc .complete.
1105 Colouring 36.10 BDP 5 Providing and applying washable oil-bound distemper of approved colour and shade to Bd. P.5 Page One One Square 32 14
old and new surfaces in one coat including scaffolding, preparing the surfaces. Number 413 Metre
(excluding the primer coat.)etc. complete.
1106 Colouring 36.11 BDP 5A Providing and applying washable oil-bound distemper of approved colour and shade to Bd.P.5 Page One One Square 48 19
old and new surfaces in two coats including scaffolding, preparing the surfaces. Number 413 Metre
(excluding the primer coat.) etc. complete.
1107 Colouring 36.12 BDP 6 Providing and applying plastic emulsion paint of approved quality, colour and shade to old Bd.P.6 Page One One Square 80 24
and new surfaces in two coats including scaffolding, preparing the surface. Number 414 Metre
(excluding the primer coat)etc. complete.
Page 227
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1108 Colouring 36.13 BDP 6A Providing and applying plastic emulsion paint of approved quality, colour and shade to old Bd.P.6 Page One One Square 100 28
surface in three coats including scaffolding, preparing the surface. (excluding primer coat) Number 414 and Pre- Metre
etc. complete. approval of
Superintending
Engineer
1109 Colouring 36.14 BDP 6A Providing and applying plastic emulsion paint of approved quality, colour and shade to Bd.P.6 Page One One Square 135 41
new surface in three coats including scaffolding, preparing the surface. (excluding primer Number 414 and Pre- Metre
coat) etc. complete. approval of
Superintending
Engineer
1110 Colouring 36.15 BDP Washing and cleaning of decorated wall surfaces with soap, soda and water etc. complete. As directed by One Square 3 3
Engineer in Metre
charge.
1111 Colouring 36.16 BDP Providing and applying plastic emulsion paint of approved quality, colour and shade to old Bd.P.6 Page One One Square 57 14
and new surfaces in single coat including scaffolding, preparing the surface. (excluding Number 414 Metre
the primer coat)etc. complete.
1112 Colouring 36.19 BDP Scrapping the old plastered internal surface with sand paper and coating the entire As directed by One Square 36 32
surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete Engineer in charge. Metre
as directed.
1113 Colouring 36.20 BDP Providing and applying interior wall finish luster of approved make on internal wall As directed by One Square 238 132
surface as detailed below Scrapping the surface with emery paper and wipe clean wall Engineer in charge. Metre
primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20%
with roller and allowing to dry for a period 6 to 8 hours. wall putty with
appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping
with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral
turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and
wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral
turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying
2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with
roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior
approval of S.E.)
Page 228
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1114 Colouring 36.21 BDP Providing and applying Royale Luxury Emulsion of approved make on internal wall As directed by One Square 275 136
surface as detailed below Scrapping for surface with emery paper and wipe clean Engineer in charge. Metre
for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or
water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with
appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity.
Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion
1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints
Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 %
by roller. (With prior approval of S.E.)
Page 229
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1118 Wood Work 37.04 BDQ 2A Providing and fixing Jungle (hard) wood of approved species joists and girders in timber Bd.Q.2 Page One One Cubic Metre 64243 5290
floor of single, double or framed type including scaffolding if necessary and one primer Number 420
coat etc. complete.
1119 Wood Work 37.05 BDQ 3 Providing and fixing Indian teak wood plank ceiling 20 mm thick plain underside Bd.Q.3 Page One One Square 2802 236
tongued and grooved including iron screws, scaffolding, if necessary, including one Number 421 Metre
primer coat on under side and one coat of coal tar on upper side etc. complete.
1120 Wood Work 37.06 BDQ 4 Providing and fixing Indian teak wood framed collar beam / king post / queen post truss, Bd.Q.4, Page One One Cubic Metre 163386 36667
with all Iron work including scaffolding, if necessary, and one coat of primer etc. Number 422
complete.
1121 Wood Work 37.07 BDQ 4A Providing and fixing in teak wood framed collar beam / king post / queen post truss, with Bd.Q.4, Page One One Cubic Metre 92901 36667
all iron work including scaffolding, if necessary and primer coat etc. complete. Number 422
1122 Wood Work 37.08 BDQ 5 Providing and fixing country teak wood common rafters, purlins and purlin cleats, hip Bd.Q.5, Page One One Cubic Metre 147080 15711
rafters, jack rafters, ridges, wall plates, post plates and posts for roofing etc. including Number 423
scaffolding, if necessary, all iron work and one coat of primer etc. complete.
1123 Wood Work 37.09 BDQ 5A Providing and fixing teak wood common rafters, purlins and purlin cleats, hip rafters, Bd.Q.5, Page One One Cubic Metre 75542 15711
jack rafters, ridges, wall plates, post plates and posts for roofing, etc. including Number 423
scaffolding, if necessary all iron work and one coat of primer etc. complete.
1124 Wood Work 37.10 BDQ 8 Providing and fixing teak wood hand rail of 60 mm x 75 mm as per detailed drawings or Bd.Q.8, Page One One Running 1254 471
as directed by the Engineer, including french polishing, etc. complete. Number 425 Metre
(Note : The work to be executed on preapproval of Superintending Engineer).
1125 Wood Work 37.11 BDQ 6 Providing and fixing country teak wood two way trellis work with battens or laths 2.5 cm Bd/Q-6 P-424 One Square 2042 157
x 1.2 cm and 5 cm x 5 cm openings including frame of 8 cm x 5 cm vertical and Metre
horizontal scantlings and coat of primer etc. complete.
Page 230
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1126 Wood Work 37.12 BDQ 6 Providing and fixing hard wood of approved species two way trellis work with Bd/Q-6 P-425 One Square 929 157
battens or laths 2.5 cm x 1.2 cm and 5 cm x 5 cm openings including frame of 8 cm x 5 Metre
cm vertical and horizontal scantlings and coat of primer etc. complete.
1127 Wood Work 37.13 BDQ 18 Providing and fixing decorative teak plywood veneer lining 4 mm thick with backing of Bd.Q. 18 Page One Square 1328 338
teak wood frame work of battens 12 mm X 25 mm at 30 cm center to center fixed to walls One Number 431 Metre
and pillars with 12 mm thik phywood building without skirting and cornice as per
drawings including necessary iron work and finishing the exposed wood work with french
polish etc. complete.
1128 Wood Work 37.14 BDQ Providing and fixing 20 mm thick superior veneer board pelmet box 150 to 200 mm wide As directed by One Square 3512 2142
to doors or window frames including 20mm dia. Aluminium curtain rod with Engineer- in- charge. Metre
sockets and finishing with french polishing (without top)etc. complete.
1129 Wood Work 37.15 BDQ Providing and fixing 20 mm thick Laminated sheet board pelmet box 150 to 200mm wide As directed by One Square 3173 2142
to doors or window frames including 20 mm dia. Aluminium curtain rod with Engineer- in- charge. Metre
sockets and finishing with french polishing (without top) etc.complete.
1130 Wood Work 37.16 BDQ 19 Providing and fixing Indian teak wood eaves boards 15 cm wide and 25 mm thick Bd.Q. 19 Page One Running 674 157
plain decorative type including scaffolding and painting with two coats etc. complete. One Number 432 Metre
1131 Wood Work 37.17 BDQ 19A Providing and fixing seasoned and treated jungle wood of approved species eaves board Bd.Q. 19 Page One Running 468 170
15 cm wide and 25 mm thick plain decorative type including scaffolding and painting One Number 432 Metre
with two coats etc. complete.
1132 Wood Work 37.18 BDQ 20 Providing and fixing Teak wood eaves plate of size 10cm wide and 20 mm thick Bd.Q.20 Page One Running 355 94
includingscaffolding and painting in two coats etc. complete. One Number 432 Metre
1133 Wood Work 37.19 BDQ 21 Providing and fixing country teak wood barge board 22 cm wide and 20mm thick plain Bd.Q.21 Page One One Running 738 157
type including scaffolding and painting in two coats etc. complete. Number 433 Metre
1134 Wood Work 37.20 BDQ 21A Providing and fixing seasoned and treated jungle wood of approved species barge board Bd.Q.21 Page One One Running 442 157
22 cm wide and 20 mm thick plain type including scaffolding and painting in two Number 433 Metre
coats etc. complete.
1135 Wood Work 37.21 BDQ Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle As directed by One Square 3538 169
board with approved coloured laminated face 1.5 mm thick bonded with phenol Engineer in charge. Metre
formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised
fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame).
Page 231
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1136 Wood Work 37.22 BDQ Providing and fixing Shutter to wall Cupboard consisting of Teak Wood styles and Rails As directed by One Square 3682 211
25 mm thick and 75 mm wide with panel insert of 12 mm thick particle Board with one Engineer in charge. Metre
approved coloured Laminated Face on one side 1.5 mm thick, bonded with Phenol
Formaldehyde Synthetic Resin including Lipping Beading. Iron oxidised fixtures and
fastening and oil primer coat etc. complete. (Excluding cupboard frame).
1137 Wood Work 37.23 BDQ 22 Providing and fixing jungle wood ballies of approved species 85 mm average dia. Bd.Q.22/Page One One Running 494 159
for common rafters, purlins, ridges, hip and valley rafters, jack rafters, wall plates, post Number434 Metre
plates, posts etc. including all iron work scaffolding if necessary and oiling in one coat
etc. complete.
1138 Wood Work 37.24 BDQ 23 Providing and fixing 100 mm dia. Country teak wood ballies for post truss of 6.00 m. Bd.Q.22/Page One One Running 337 40
span as per drawing or as directed by Engineerin-charge including all iron work, Number434 Metre
scaffolding if necessary and oiling etc. complete.
1139 Wood Work 37.25 3 BDN 12 B Providing and applying Wax polishing to the old wood work including knotting, Bd.N.1.2/Page One Square 57 41
preparing the surface, scaffolding etc. complete as directed. One Number399 Metre
1140 Wood Work 37.26 BDQ Providing and fixing 3.5 to 4 mm thick Veneer finish wall Panaling made out of 50 x 25 As directed by One Square 5020 2327
mm (finished size) C.C.T.W. frame work or size of 600 x 600 mm center or as per site Engineer in charge. Metre
condition covered by 6 mm thick marine plywood of the generally confiriming to
I:S 710-1980 finished with 3.5 to 4 mm thick matching Veneer of approved color
and in satin wallnut groov matched veneer pattern and design including melamine
polishing & design with antitermite treatment etc. to plywood and woodwork with
ten years guarantee bond etc. including all lead and lifts complete as per Architects
Drawing and instructions of Engineer Incharge.
Page 232
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1144 Roofing and 38.04 BDR 5 Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 Bd.R.5, Page One One Square 870 118
Ceiling B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws Number 453 Metre
and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5
Kilogram/sq.m.).
1145 Roofing and 38.05 BDR 5 Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip Bd.R.5, Page One One Square 1139 143
Ceiling or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron Number 453 Metre
screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.).
1146 Roofing and 38.06 BDR 7 Providing and fixing 6.00 mm thick ISI mark Asbestos Cement Corrugated sheet Bd. R.7, Page One One Square 442 197
Ceiling roofing including galvanised iron 'J' or 'L' hook bolts galvanised iron band bituminous G.I. Number 453 Metre
washers, galvanised iron clamps, bolts, nuts and scaffolding etc. complete.
1147 Roofing and 38.07 BDR 9 Providing and fixing 6 mm thick ISI mark Asbestos Cement ridge capping for Bd.R.9, Page One One Running 648 210
Ceiling roofing including galvanised iron hooks, bolts, galvanised iron and bituminous washers, Number 455 Metre
galvanised iron clamps, bolts, nuts including scaffolding etc. complete.
1148 Roofing and 38.08 BDR 10 Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120 Bd. R. 10, Page One One Running 2926 446
Ceiling cm wide with teak wood planking 20 mm thick including two coats of coal-tarring Number 455 Metre
the upper surface of plank etc. complete. (excluding painting to underside of plank).
1149 Roofing and 38.09 BDR 10A Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 90 Bd. R. 10, Page One One Running 2218 478
Ceiling cm wide with teak wood planking 20 mm thick including two coats of coal-tarring Number 455 Metre
the upper surface of plank etc. complete. (excluding painting to underside of plank).
Page 233
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1150 Roofing and 38.10 BDR 10B Providing and fixing valley gutter of 24 B.W.G. (0.63 mm) thick G.I. sheet 120 cm wide Bd. R. 10, Page One One Running 2657 319
Ceiling with 20 mm thick teak wood planking underneath coal tarring etc. complete. Number 455 Metre
1151 Roofing and 38.11 BDR 11 Providing and fixing glass tiles of Mangalore type at required places in Mangalore tile Bd. R. 11, Page One Number 627 76
Ceiling roof including scaffolding if necessary etc. complete. One Number 456
1152 Roofing and 38.12 BDR 13 Providing and fixing Mangalore pattern cowl ventilator tiles in the required places Bd. R. 13, Page One One Number 367 45
Ceiling in a Mangalore tiled roof including scaffolding if necessary etc. complete. Number 459
1153 Roofing and 38.13 BDR 16 Providing and fixing false ceiling of plain asbestos cement sheets 4 mm thick with teak Bd.R.16, Page One One Square 1875 245
Ceiling wood beadings 45 x 12 mm with frame work of teak wood battens of size 70 x 60 mm at Number 460 Metre
1.00 M center to center including scaffolding, if necessary, all iron work and
painting (visible surfaces) to A.C. sheet and beading in two coats etc. complete.
(excluding T.W. runner to be paid separately).
1154 Roofing and 38.14 BDR Providing and fixing frame work of anodised aluminium sections for suspended false As directed by One Square 1269 797
Ceiling ceiling consisting of aluminium T 50 mm x 40 mm weighing 0.39 Kilogram/m. at 60 cms Engineer in charge. Metre
c/c and fixed with ( 15 x 15 mm) flanges weighing 0.119 Kilogram/m suspended on 6 mm
dia. mild steel rod weighing 0.22 Kilogram/m fixed on wall and beams including rounding
of the edges with aluminium T of 50 mm x 40 mm weighing 0.39 Kilogram/m etc.
including all labour etc. complete.
1155 Roofing and 38.15 BDR Providing and fixing frame work of galvanised iron for suspended false ceiling As directed by One Square 1168 787
Ceiling which includes galvanised iron perimeter channels of size 27 mm and 0.5 mm Engineer in charge. Metre
thick having one flange of 20 mm and another of 30 mm along with perimeter of the
ceiling, fixing in brick wall / partition with the help of rawal plugs and screws,
suspending galvenised iron intermediate channels of size 45 mm and 0.9 mm thick with
two flanges of 15 mm each from the soffit at 1200 mm centers with steel galvanised iron
hanger of width 25 mm x 0.5 mm fasteners, ceiling section of 0.5 mm thickness
having curved wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5
mm fixed to the intermediate channel with the help of connecting clips and in direction
perpendicular to the intermediate channel at 450 mm centers, 12.5 mm dry walls screws at
230 mm centers; fixing screws mechanically either with screw driver or drilling machine
with suitable attachment etc. complete.
1156 Roofing and 38.16 BDR 17 Providing and fixing false ceiling of teak wood particle board half perforated sheet 12 Bd. R. 17 Page One One Square 958 319
Ceiling mm thick including scaffolding, if necessary, all iron work and two coats of oil painting to Number 461 Metre
boards and beading i.e. visible surface etc. complete. (excluding frame work and runners)
Page 234
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1157 Roofing and 38.17 BDR Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous As directed by One Square 1205 478
Ceiling plaster of paris including scaffolding if necessary all architectural work like mouldings, Engineer in charge. Metre
cornices, coves, domes, cups as per detailed drawings and three coats of spray
painting to boards etc. complete. (excluding frame work, runners and mild steel
suspenders).
1158 Roofing and 38.18 BDR 19 Providing and fixing false ceiling of 12mm thick as per drawings including powder Bd. R. 19 Page One One Square 1527 718
Ceiling coated G.I. wall angle of 20mm x 20mm size, G.I. grid runners of size 20mm x 38mm at Number 462 Metre
600mm center to center both ways and suspended using G.I. 3mm wire including
fixing using butterfly clips and fasteners including transporting, scaffolding all
necessary labour and machinery, finishing etc. complete.
1159 Roofing and 38.19 BDR Providing and fixing false ceiling of 15mm thick as per drawings including powder As directed by One Square 1752 787
Ceiling coated G.I. wall angle of 20 mm x 20 mm x 0.60 mm size, G.I. grid runners of size 15 mm Engineer in charge. Metre
x 38 mm at 600 mm center to center both ways and suspended using G.I. 3 mm wire
including fixing using butterfly clips and fasteners including transporting, scaffolding all
necessary labour and machinery, finishing etc. complete.
1160 Roofing and 38.20 BDR 17 Providing and fixing false ceiling of T.W. partical board half perforated sheets 12 mm Bd. R. 17, Page One One Square 1590 354
Ceiling thick with frame work of M.S. angle 40 x 40 x 5 mm and T of size 40 x 40 x 6 mm at 60 Number 461 Metre
cm center to center including 12 mm dia. hangers, T.W. battens 50 x 25 mm and beading
25 x 15 mm thick scaffolding, if necessary, all iron work and two coats of painting to
boards and beading i.e. visible surface etc. complete.
1161 Roofing and 38.21 BDR 17 Providing and fixing False ceiling of 12 mm thick Laminated board with frame of M.S. Bd. R. 17, Page One One Square 2435 354
Ceiling angle 40 x 40 x 5 mm and Tee of size 40 x 40 x 6mm at 60 cm c/c including 12 mm dia. Number 461 Metre
hangers, T.W. battens 50 x 25 mm and beading 25 x 15 mm thick scaffolding if
necessary, all Iron work etc. complete.
1162 Roofing and 38.22 BDR Providing and applying two coats of bitumen to roof on new dungaree cloth one coat on As directed by One Square 166 53
Ceiling each side etc. complete as directed. Engineer in Metre
charge.
1163 Roofing and 38.23 BDR Providing and applying one coat of bitumen to roof (without cloth) including scaffolding As directed by One Square 55 38
Ceiling etc. complete as directed. Engineer in Metre
charge.
1164 Roofing and 38.24 BDR Removing and resetting Mangalore tiles from roof including refixing loose battens As directed by One Square 96 94
Ceiling etc. complete. Engineer in charge. Metre
1165 Roofing and 38.25 BDR Removing the tiles, battens and dungry cloth purlins, rafters and ridges etc. from roof, As directed by One Square 72 72
Ceiling sorting out the serviceable and unserviceable materials and stacking the same as and Engineer in charge Metre
where directed in the compound, scaffolding etc. complete.
1166 Roofing and 38.26 BDR Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including As directed by One Square 89 89
Ceiling sorting serviceable and unserviceable materials, stacking the same as and where Engineer in charge. Metre
directed in the compound including scaffolding etc. complete.
Page 235
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1167 Roofing and 38.27 BDR Removing and lowering the roof truss carefully without damaging the members and As directed by One Number 774 774
Ceiling stacking as and where directed in the compound including scaffolding etc. complete. Engineer in
charge.
1168 Roofing and 38.28 BDR Removing R.S. girders of any size and span lowering the same and stacking neatly As directed by Metric Tonne 2408 2408
Ceiling wherever directed in the compound scaffolding etc. complete. Engineer in
charge.
1169 Roofing and 38.29 BDR Providing fixing country teak wood battens 50 mm x 25 mm for Mangalore tile roof work As directed by One Running 124 20
Ceiling with all iron work scaffolding and oiling the battens etc. complete. Engineer in charge. Metre
1170 Roofing and 38.30 BDR Providing fixing teak wood battens 25 mm x 12 mm for Mangalore tile roof work with As directed by One Running 51 25
Ceiling iron work scaffolding and oiling the battens etc. complete. Engineer in Metre
charge.
1171 Roofing and 38.31 BDR Providing and fixing sky light in R.C.C. roof including frame made of M.S. angle 50 x 50 As directed by One Square 1461 124
Ceiling x 6 mm with hold fast, sheet glass 12 mm thick, Chicken mesh 24 gauge with all Engineer in charge. Metre
accessories and required fixtures and fastening fitting including painting etc. complete.
1172 Roofing and 38.32 BDR Providing and fixing 12 mm dia. mild steel bar upto 0.5 M. length for anchor As directed by One Number 140 112
Ceiling rods with necessary threading nuts and bolts etc. complete. Engineer in charge.
1173 Roofing and 38.33 BDR 3 Providing fixing Mangalore tile roofing with class AA tiles in cement mortar 1:4 on Bd. R. 3A., Page One Square 1065 460
Ceiling sloping slab including necessary scaffolding, curing, finishing, etc. complete. One Number 449 Metre
1174 Roofing and 38.34 BDR Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. As directed by One Square 1173 119
Ceiling total on each side ) profiled sheets for roofing. The feed material is manufactured out of Engineer in charge. Metre
nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with
min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy
(55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super
durable polyester paint coat ( with inorganic pigment). The paint shall have a total
coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top
surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-
1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square
fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be
designed for anti-capillary groove. and return leg. The feed material should have coil
manufacturers product details marked a regular interval. Including fasteners with min.
fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc.
complete. (weight of profile 4.52 Kilogram/ One Square Metre)
Page 236
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1175 Roofing and 38.35 BDR Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. As directed by Running Meter 751 71
Ceiling total on each side ) profiled sheets for roofing. The feed material is manufactured out of Engineer in charge.
nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with
min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55%
aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super
durable polyster paint coat ( with inorganic pigment). The paint shall have a total
coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top
surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-
1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square
fluting in the five pan at nominal 180-250 mmcenter- to-center. The end rib shall be
designed for anti-capacity groove. and return leg. The feed material should have coil
manufacturers product details marked a regular interval. including fasteners with min.
fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc.
complete. (weight of profile 4.52 Kilogram/ One Square Metre) 600 mm girth (Surface
Width).
1176 Roofing and 38.36 BDR Providing and fixing of colour coated Zinc aluminium ( R ) AZ150 ( min 150 gms/sq.mt. As directed by Running Meter 1068 107
Ceiling total on each side ) profiled sheets for roofing. The feed material is manufactured out of Engineer in charge.
nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with
min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55%
aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super
durable polyster paint coat ( with inorganic pigment). The paint shall have a total
coating thickness of nominal 35 um, comprising of nominal 25um exterior coat on top
surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-
1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square
fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be
designed for anti-capacity groove. and return leg. The feed material should have coil
manufacturers product details marked a regular interval. including fasteners with min.
fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc.
complete. (weight of profile 4.52 Kilogram/ One Square Metre) 900 mm girth (Surface
Width).
1177 Roofing and 38.37 BDR Providing and fixing UPVC Roof made up of 3 layers roofing material of As directed by One Square 1594 118
Ceiling thickness 2mm having width of 1130 mm and of required Length having Tensile strength Engineer in charge. Metre
not less than 330 Kilogram/cm2, including fastening with self drilling screw having
washers made of stainless steel etc. complete.
1178 Roofing and 38.38 BDR Providing and fixing PVC coloured Ridge tiles over UPVC roofing where required As directed by One Running 1385 71
Ceiling having size 113cm x 41cm for ridge including fastening with self drilling screw Engineer in charge. Metre
having washers made of stainless steel etc. complete.
Page 237
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1179 Roofing and 38.39 BDR Providing and fixing 15 mm thick eco-friendly densified edge calcium silicate false As directed by One Square 2044 408
Ceiling ceiling of approved texture of size 595mm x 595mm in true horizontal level, Engineer in charge. Metre
suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising
at @12 gm/sq.m including both sides) consisting of main T runner suitably spaced
at joints to get required length and size 24X38mm. made from 0.33mm
thick(minimum ) sheet, spaced 1200mm center to center and cross T of size 24X28mm
made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600
mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a
perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick
(minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified
edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid,
including light fittings , fixtures , smoke detectors etc., wherever required. Main T runners
suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to
ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods
with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center
to center along main T bottom exposed with 24mm of all T-sections shall be
prepainted with polyester baked paint, for all heights, as per specifications, drawings
etc. complete.(currently this item should be used only for VIP cabins)
1180 Roofing and 38.40 BDR Providing and fixing false ceiling with eco-friendly light-weight calcium silicate As directed by One Square 2045 409
Ceiling tiles of spintone surface texture aerolite make or equivalent of size 595mm x 595mm Engineer in charge. Metre
having 15mm thick densified micro look edge and 100% humidity resistance
incombustible as per BS 46part IV and thermal conductivity 0.043 w/m 0 KC and NRC
0.50 placed in true horizontal level suspended grid of size 600x600mm made from
hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed
white with 6mm reveal profile (white/black), wherein, main T runner of size
42mmx14mm between main tee 600mm center-tocenter and secondary cross T of size
33x14x0.43mm thick of length 600mm long spaced inter-locked at middle of the first
crossed T in each panel to form grid of 1200mmx600mm resting on periphery wall
Profile wall section 19mm (7+7) x 19mmx0.40thicknesses and laying false ceiling
for services like diffusers grills including cutting, making opening for light fittings,
fixtures, , smoke detectors etc., wherever required. Main T runners suspended from
ceiling with using G.I. soffit cleats of size 25x35x1.6 mm of required length fixed to the
ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I. adjustable rods
with powder- coated/good quality G.I. level adjustment clips of 35x35x0.8mm
spaced @1200, center-to- center along main T all complete at all heights as per the
specifications, drawings and as per
Page 238
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1181 Roofing and 38.41 BDR Providing and fixing self supporting steel roofing system for a Godown or alike made up As directed by One Square 2264 399
Ceiling of structural grade steel sheet of 912 millimeter width ( tolerance +/- 2 millimeter ), Engineer in charge. Metre
moulded at site using mechanical press dies to the desired curve and shape to form 605
millimeter wide interlocking panels . The interlocking panels shall be pressed to close the
seam forming water tight joints for a span of 15.30 meter having arch rise as 3.06 meter,
arch length 17.75 meter. The base material made up of imported galvalume steel
complying to ASTM A792 having base metal thickness of 0.80 millimeter ( tolerace + / -
0.02 millimeter ) with alloy coating AZ 150 and paint coating of regular modified polyster
, top coat 25 micron and bottom coat 12 micron as per approved colour , including fixing
hangers , clamps etc.as may be necessary of Proflex standard, including fixing sky light of
2 millimeter thick polycarbonate sheet of size 2' x 7' and turbo ventilator of 24'' diameter
to be installed at every 30 feet along the length of roof including finishing, testing and
cleaning etc. complete.
1182 Roofing and 38.42 BDR Providing and fixing self supporting steel roofing system for a Godown or alike made up As directed by One Square 2357 399
Ceiling of structural grade steel sheet of 912 millimeter width ( tolerance + / - 2 millimeter ), Engineer in charge. Metre
moulded at site using mechanical press dies to the desired curve and shape to form 605
millimeter wide interlocking panels . The interlocking panels shall be pressed to close the
seam forming water tight joints for a span of 21.30 meter having arch rise as 4.26 meter,
arch length 25.13 meter. The base material made up of imported galvalume steel
complying to ASTM A792 having base metal thickness of 1.00 millimeter ( tolerace + / -
0.02 millimeter ) with alloy coating AZ 150 and paint coating of regular modified polyster
, top coat 25 micron and bottom coat 12 micron as per approved colour , including fixing
hangers , clamps etc.as may be necessary of Proflex standard, including fixing sky light of
2 millimeter thick polycarbonate sheet of size 2' x 14' and turbo ventilator of 24'' diameter
to be installed at every 30 feet along the length of roof including finishing , testing and
cleaning etc. complete.
Page 239
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1183 Roofing and 38.43 BDR Providing and fixing self supporting steel roofing system for a Godown or alike made up As directed by One Square 2492 399
Ceiling of structural grade steel sheet of 912 millimeter width ( tolerance + / - 2 millimeter ), Engineer in charge. Metre
moulded at site using mechanical press dies to the desired curve and shape to form 605
millimeter wide interlocking panels . The interlocking panels shall be pressed to close the
seam forming water tight joints for a span of 25.00 meter having arch rise as 5.00 meter,
arch length 29.00 meter The base material made up of imported galvalume steel
complying to ASTM A792 having base metal thickness of 1.20 millimeter ( tolerace + / -
0.02 millimeter ) with alloy coating AZ 150 and paint coating of regular modified polyster
, top coat 25 micron and bottom coat 12 micron as per approved colour , including fixing
hangers , clamps etc.as may be necessary of Proflex standard, including fixing sky light of
2 millimeter thick polycarbonate sheet of size 2' x 14' and turbo ventilator of 24'' diameter
to be installed at every 30 feet along the length of roof including finishing , testing and
cleaning etc. complete.
1184 Roofing and 38.44 BDR Providing and fixing self supporting steel roofing system for a Godown or alike made up As directed by One Square 2878 399
Ceiling of structural grade steel sheet of 912 millimeter width ( tolerance + / - 2 millimeter ), Engineer in charge. Metre
moulded at site using mechanical press dies to the desired curve and shape to form 605
millimeter wide interlocking panels . The interlocking panels shall be pressed to close the
seam forming water tight joints for a span of 28.75 meter having arch rise as 5.75 meter,
arch length 33.92 meter. The base material made up of imported galvalume steel
complying to ASTM A792 having base metal thickness of 1.40 millimeter ( tolerace + / -
0.02 millimeter ) with alloy coating AZ 150 and paint coating of regular modified polyster
, top coat 25 micron and bottom coat 12 micron as perapproved colour , including fixing
hangers , clamps etc.as may be necessary of Proflex standard, including fixing sky light of
2 millimeter thick polycarbonate sheet of size 2' x 14' and turbo ventilator of 24'' diameter
to be installed at every 30 feet along the length of roof including finishing , testing and
cleaning etc. complete.
Page 240
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1185 Roofing and 38.45 BDR Providing and Fixing of Mineral Fibre Board Acoustical Suspended Ceiling As directed by One Square 2391 239
Ceiling System with ultima (Bevelled Tegular) Edge Tiles of size 15mm Exposed GRID. The Engineer in charge. Metre
tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance 85%,
Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK
Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 20mm , suitable for
Green Building application, with Recycled content of 32%. The tile shall be laid on
precoated G.I.channel on XL2 Clip having a web height of 32 mm with 15 mm wide T -
section flanges colour white having rotary stitching on all T sections i.e. the Main Runner,
1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying
capacity of 7.7 Kilograms/M2 and minimum pull out strength of 100 Kilograms.. The T
Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension
system. The Tile and Grid system used together should carry a 10 year warranty. products
approved as per GRIHA and BS 476 etc. complete.
1186 Roofing and 38.46 BDR Providing and Fixing of Mineral Fibre Suspended Ceiling System with Bioguard As directed by One Square 2051 239
Ceiling (Bevelled Tegular) EDGE TILES WITH 15mm Exposed GRID. The tiles should Engineer in charge. Metre
have Humidity Resistance (RH) of 99%, Light Reflectance 90%, Thermal Conductivity
k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0/Class 1 (BS
476 Part 6 and 7), in module size of 600x600 x 16mm with Anti Microbial coating
on the face of the tile, suitable for Green Building application, with Recycled content
of 34%. The tile shall be laid on precoated G.I. channel on XL2 Clip having a web
height of 32 mm 32 with 15 mm wide T - section flanges colour white having rotary
stitching on all T sections i.e. the Main Runner and 1200 mm Cross Tees with a web
height of 32 mm and a load carrying capacity of 7.7 Kilograms/M2 and pull out
strength of 100Kilograms. . The T Sections have a Galvanizing of 90 grams per M2 and
need to be installed with Suspension system The Tile and Grid system used together
should carry a 10 year warranty. products approved at GRIHA and BS 476 etc. complete.
Page 241
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1187 Roofing and 38.47 BDR Providing and Fixing Soft Fibre Acoustical Suspended Ceiling System with Optra As directed by One Square 2879 207
Ceiling (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Engineer in charge. Metre
Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ?85%, Colour
White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x
600 x 15mm , suitable for Green Building application, with Recycled content of 66% GW
and 74% RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T -
section flanges colour white having rotary stitching on all T sections i.e. the Main Runner,
1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying
capacity of 7 Kilograms/M2 with a minimum pull out strength of 100 Kilograms. The T
Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension
system The Tile and Grid system used together should carry a 10 year warranty. products
approved as per GRIHA and BS 476 etc. complete.
1188 Roofing and 38.48 BDR Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in As directed by One Square 2008 239
Ceiling tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be Engineer in charge. Metre
laid on grid systems with 15mm wide T - section flanges color white having rotary
stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.Providing and Fixing
of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated
galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid
systems with 15mm wide T - section flanges color white having rotary stitching on the
Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and
BS 476 etc. complete.
1189 Roofing and 38.49 BDR Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with As directed by One Square 1873 207
Ceiling Dune (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Engineer in charge. Metre
Humidity Resistance (RH) of 99%,NRC 0.5, Light Reflectance 85%, Thermal
Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 /
Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , with Recycled content
of 35 %. The tile shall be laid on precoated G.I.channel height 32 with 15 mm wide T -
section flanges colour white having rotary stitching and XL2 CLIP on all T sections i.e.
the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32mm and a
load carrying capacity of 7.57 Kilograms/M2 and pull out stength of minimum 100
Kilograms.. The T Sections have a Galvanizing of 90 grams per M2 and need to be
installed with Suspension system. The Tile and Grid system used together should
carry a 10 year warranty.approved as per GRIHA and BS 476 etc. complete.
Page 242
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1190 Roofing and 38.50 BDR Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Fine As directed by One Square 1595 207
Ceiling Fissured (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Engineer in charge. Metre
Humidity Resistance (RH) of 99%,NRC 0.6, Light Reflectance 85%, Thermal
Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 /
Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , with Recycled content
of 31 %. The tile shall be laid on precoated G.I channel height of 32 with 15 mm wide T -
section flanges colour white having rotary stitching and XL2 CLIP on all T sections i.e.
the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32mm and a
load carrying capacity of 7.57 Kilograms/M2 and pull out stength of minimum 100
Kilograms.. The T Sections have a Galvanizing of 90 grams per M2 and need to be
installed with Suspension system. The Tile and Grid system used together should carry
a 10 year warranty. product approved in GRIHA and BS 476 etc. complete.
1191 Roofing and 38.51 BDR Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick As directed by One Square 1769 975
Ceiling Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid Engineer in charge. Metre
constructed and suspended from the main ceiling consisting of ceiling sections of size 25
x 50 mm maximum center to center distance of 600 milimetre perimeter channel and
intermediate channels at maximum center to center distance 1200 milimetre
galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board
should be fixed to galvanized iron grid with necessary screws. The boards should be
taped and filled from underside to give smooth, seamless ceiling. The rate should
include necessary additional ceiling sections and intermediate channels. Additional
intermediate channels should be fixed to strap hangers for additional support to prevent
strapping at every 1200 milimetre item to be completed in all respect including necessary
sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc.
all complete.
1192 Roofing and 38.52 BDR Providing and fixing Modular false ceiling of 600 x 600 mm center to center and 13 mm As directed by One Square 2568 878
Ceiling thick square mineral fiber board to be fixed on frame work of alluminium sections for Engineer in charge. Metre
suspended false ceiling consisting of alluminium T 2”x1 ½” (50 mm x 40 mm)
weighing 0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm)
flanges weighing 0.19 Kilogram/m suspended on 6 mm dia mild steel rod weighing 0.22
Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of
2” x 1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m etc. (all alluminium sections shall
be anodized) including all labour, material, lifts etc. complete.
Page 243
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1193 Roofing and 38.53 Providing and fixing self supporting steel roofing system (Proflex) for a Godown or alike As directed by One Square 3371 399
Ceiling ( New made up of structural grade steel sheet of 912 millimeter width ( tolerance + / - 2 Engineer in charge. Metre
Item) millimeter ), moulded at site using mechanical press dies to the desired curve and shape to
form 605 millimeter wide interlocking panels . The interlocking panels shall be pressed to
close the seam forming water tight joints for a span of 32.5 meter having arch rise as 6.5
meter, arch length 37.7 meter. The base material made up of imported galvalume steel
complying to ASTM A792 having base metal thickness of 1.60 millimeter ( tolerace + / -
0.02 millimeter ) with alloy coating AZ 150 and paint coating of regular modified polyster
, top coat 25 micron and bottom coat 12 micron as perapproved colour , including fixing
hangers , clamps etc.as may be necessary of Proflex standard, including fixing sky light of
2 millimeter thick polycarbonate sheet of size 2' x 14' and turbo ventilator of 24'' diameter
to be installed at every 30 feet along the length of roof including finishing , testing and
cleaning etc. complete.
Page 244
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1195 Doors and 39.02 BDT Providing and fixing frame with / without ventilator of size as specified with Country As directed by One Cubic Metre 107112 135
Windows non teak wood for doors and windows including chamfering, rounding, rebating, iron Engineer in charge.
holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete.
1196 Doors and 39.03 BDT-4 Providing and fixing the Country cut teak wood second class fully glazed openable BD-T-4 Page One One Square 5193 2136
Windows fanlight rectangular in shape as per detailed drawing excluding the frame,stainless steel Number 479 Metre
fixtures and fastenings and finishing the wood work with 3 coats of oil painting.
1197 Doors and 39.04 BDT 7 and 8 Providing and fixing Country cut teak wood double or single leaf second class fully BD-T-7 and 8 Page One Square 9574 2853
Windows panelled door shutter with 35mm thick style and rail with 25 mm thick panels with One Number 481-82 Metre
openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm
stainless steel fixtures and fastening and finishing the wood work with oil painting
3 coats. (Excluding the door frame)
1198 Doors and 39.05 BDT-11 Providing and fixing Country cut teak wood single leaf panelled door shutter without As directed by One Square 5852 1724
Windows fanlight and 25mm thick as per drawing consisting of T.W. top rail size 100mm x 25mm Engineer in charge. Metre
and bottom lock rail 200mm x 25mm insert pannel 12 mm thick commercial ply
faced T.W. particle board with phenol formaldehyde synthetic resin (Generally
confirming to ISI 3097) excluding frame, including stainless steel fixture and
fastening and T.W. beading to junctions of panelled inserts and as instructed by the
Engineer in charge including 3 coats of oil painting etc. complete.
1199 Doors and 39.06 BDT-11 Providing and fixing single leaf panelled door shutter without fanlight and shutter As directed by One Square 8187 2445
Windows 35 mm thick as per drawing consisting of T.W. top rail size 100mm x 35 mm and bottom Engineer in charge. Metre
and lock rail 200mm x 35mm insert panel 12 mm thick commercial ply faced T.W.
particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI
3097) excluding frame, including stainless steel fixtures fastening and T.W. beading at
junction of panels inserts and as instructed by the Engineer in charge including 3 coats of
oil painting etc. complete.
Page 245
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1200 Doors and 39.07 BDT-11 Providing and fixing single or double leaf panelled door shutter excluding frame with As directed by One Square 7336 2580
Windows glazed openable fanlight shutter 35 mm thick as per detailed drawing Engineer in charge. Metre
consistingpanelled vertical styles 100 mm x 35 mm and lock and bottom rail 200 mm x
35 mm and panels 12 mm thick both side commercial ply faced particle
board including stainless steel fixtures and fastening and T.W. beading at junctions of
panel inserts and as instructed by the Engineer in charge including 3 coats of oil
painting etc. complete.
1201 Doors and 39.08 BDT-12 Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 BD-T-11 and 12 One Square 9542 2612
Windows mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm Page One Number Metre
thick and panels without ventilator as per detailed drawing excluding the door 482-83
frame, stainless steel fixtures and fastening and finishing the wood work with oil
painting 3 coats complete
1202 Doors and 39.09 BDT-34 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative BD-T-34 Page One Square 3079 741
Windows type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both One Number 499 Metre
faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts,
chromium plated fixtures and fastenings, with brass mortise lock, chromium plated
handles on both sides, and finishing with French Polish etc. complete.
1203 Doors and 39.10 BDT-36 Providing and fixing solid core flush door shutter commercial in single leaf 32 BD-T-36 Page One Square 2913 851
Windows mm thick without ventilator commercial type of exterior grade as per detailed drawings One Number 500 Metre
with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both
sides and finishing with oil painting 3 coats complete.
1204 Doors and 39.11 BDT Providing and fixing solid core flush door commercial type on single leaf 16 mm thick As directed by One Square 3839 855
Windows Bison Panel cement bonded particle Board including Teak wood lipping beading on all Engineer in charge. Metre
four edges without ventilator commercial type of exterior grade as per detailed drawings
with wrought iron hold fast,stainless steel fixtures and fastenings and handles on both
sides and finishing with oil painting three coats complete.
1205 Doors and 39.12 BDT-39 Providing and fixing Country cut teak wood single leaf door shutter with teak wood style BD-T-39 Page One Square 5475 875
Windows and rail of 25 mm thick including fixing 50 mm x 25 mm size welded mesh of 10 gauge One Number 500 Metre
as per detailed drawing or as directed with stainless steel fixture and fastening finishing
with 3 coats of oil painting etc. complete.
1206 Doors and 39.13 BDT Providing and fixing factory made panelled door shutter in single leaf 35 mm thick style As directed by One Square 2826 558
Windows and rail without ventilator with CCTW panels 12 mm thick including wrought iron hold Engineer in charge. Metre
fast and stainless steel fixtures with oil painting 3 coats etc. complete.
Page 246
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1207 Doors and 39.14 BDT Providing and fixing Country cut teak wood single leaf panelled door shutters 35 mm As directed by One Square 4800 720
Windows thick style and rail and 19 mm thick T.W. panels as per detailed drawing including Engineer in charge. Metre
wrought iron hold fast stainless steel fixtures and fastening and three coats of oil painting
etc. complete.
1208 Doors and 39.15 BDT-42 Providing and fixing fully glazed double leaf window shutter with openable BD-T-42 Page One Square 4804 1496
Windows fanlight including Country cut teak wood 25 mm thick style and rails with plain / One Number 503 Metre
obscured glass panels 5 mm thick as per drawing or as directed by the Engineer in charge
with stainless steel fixtures and fastening and finishing the wood work with oil painting
three coats etc. complete.
1209 Doors and 39.16 BDT-42 Providing and fixing Country cut teak wood window with double leaf half glazed and BD-T-42 Page One Square 5565 1506
Windows half panelled shutter with style 70 x 20 mm thick rails 95 x 20 mm thick and pannels One Number 503 Metre
15mm thick with ventilator including wrought iron hold fast, stainless steel fixtures
and fastenings and finishing the wood work with oil painting 3 coats etc. complete.
1210 Doors and 39.17 BDT-43 Providing and fixing Country cut teak wood windows with double leaf 25 mm thick BD-T-43 Page One Square 6725 1136
Windows planked shutters without ventilators as per detailed drawings including stainless steel One Number 503 Metre
fixtures and fastenings and finishing the wood work with oil painting 3 coats etc.
complete
1211 Doors and 39.18 BDT-43 Providing and fixing Country cut teak wood windows / ventilators with double leaf BD-T-43 Page One Square 7740 1265
Windows panelled shutters 25 mm thick without ventilators as per detailed drawing including One Number 503 Metre
stainless steel fixtures and fastenings and finishing the wood work with oil painting 3
coats etc. complete.
1212 Doors and 39.19 BDT-53 Providing and fixing steel window of various sizes as per detailed drawing without hot BD-T-53 Page One Square 4607 1447
Windows dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured One Number 509 Metre
glass panels of approved type and quality, iron oxidised fixtures and fastenings, oil
painting two coats complete.
1213 Doors and 39.20 BDT-53 Providing and fixing steel window of various sizes as per detailed drawing without hot BD-T-53 Page One Square 4874 965
Windows dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured One Number 509 Metre
glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing
with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.)
1214 Doors and 39.21 BDT Providing and fixing steel window C.R.C. sheet as per I.S. 1513 : 1986. gauge sect. 65 x As directed by One Square 4345 1371
Windows 40 x 25 mm shutter single sheet of 24 gauge single leaf joined by fusion welding at Engineer in charge. Metre
appropriate points with vertical grooves of 15 mm wide and 15 mm deep at a distance of
45 mm. The first and last rib should be 60 mm away from vertical edge of the
shutter. the shutter shall be welded, with angle to from the periphery of the shutter. At
the center of the frame there shall be angle welded to bifurcate the frame into
segments with two leaf shutter square 12 mm square guard bars at 120 mm center
with all accessories
Page 247
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1215 Doors and 39.22 BDT Providing and fixing in position factory made box type steel window with glazed As directed by One Square 5796 1040
Windows fanlight including steel windows of cold rolled section of 105mm x 60mm x Engineer in charge. Metre
1.25mm thick frame section filled with cement concrete (1:2:4) and metal pressed steel
shutters of 20 gauge (1mm) as per detailed drawing and design or as directed including
providing horizontal mild steel 12mm square bars at 10cm center to center, required F7B
section, section 76, section 20mm x 5mm mild steel flat for shutter and F4B section
for frame, 3mm thick glass of approved quality for fanlight necessary fixtures and
fastening etc. complete finishing with one coat of anticorrosive paint etc.complete
1216 Doors and 39.23 BDT Providing and fixing in position factory made box type fully glazed window As directed by One Square 5136 1040
Windows consisting of cold rolled section of 105mm x 60mm x 1.25mm thick frame section Engineer in charge. Metre
filled with cement concrete (1:2:4) and steel section F4B as per detailed drawing and
design including mild steel 12mm square bars at 10cm center to center, required F7B
section, section T6, section for shutter frame (Louvered clips in case of Louvered
window portion) and 3mm thick glass of approved quality of necessaryfixtures and
fastening, finishing with one coat of anticorrosive paint etc. complete .
1217 Doors and 39.24 BDT-55 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 BD-T-55 Page One Square 4829 846
Windows mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section One Number 510 Metre
fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth
and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements,
M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar,
suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9
mm thickness and of any size at top and safety devices including mechanical gear
operation arrangement consisting of worm gear wheels and worms of high grade cast iron
or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without
mechanical gear)
Page 248
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1218 Doors and 39.25 BDT-55 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 BD-T-55 Page One Square 5308 901
Windows mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section One Number 510 Metre
fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth
and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements,
M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar,
suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9
mm thickness and of any size at top and safety devices including mechanical gear
operation arrangement consisting of worm gear wheels and worms of high grade cast iron
or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With
mechanical gear)
1219 Doors and 39.26 BDT-57 Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical BD-T-57 Page One Square 4011 1088
Windows channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or One Number 511 Metre
E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of
minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted
with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be
100 mm enclosed gate position and clear space of 150 mm between two sets of
crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat
of red lead primer and oil painting etc. complete. (I.S. 105211983).
1220 Doors and 39.27 BDT-67 Providing and fixing partition of welded mesh of 3 mm dia. wires 50 mm x 25 mm size BD-T-67 Page One Square 2646 873
Windows mesh including integrated non teak seasoned wood frame 80 x 50 mm of vertical and One Number 515 Metre
horizontal scantling and finishing with oil painting 3 coats etc. complete
1221 Doors and 39.28 BDS Providing and fixing sheet glass of 24 oz. for all size including putty etc. complete BD-S Page One One Square 998 430
Windows Number 465 to Metre
467
1222 Doors and 39.29 BDT-53 Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing BD-T-53 Page One Square 3375 806
Windows without hot dip zinc coating including fabricating glazing with plain / obscured glass One Number 509 As Metre
panes 5 mm thick and approved type and quality and iron oxidized fixtures and directed by Engineer
fastening oil paint 2 coats etc. complete. in
charge.
1223 Doors and 39.30 BDT-53 Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with BD-T-53 Page One Square 4827 1537
Windows hot dip zinc coating including fabricating glazing with plain / obscured glass pans 5 One Number 509 As Metre
mm thick and approved type quality and iron oxidized fixtures and fastening with guard directed by Engineer
square bars 12 mm 10 cm c/c and oil painting 2 coats etc. complete. in charge.
Page 249
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1224 Doors and 39.31 BDT Providing and fixing M.S. grill door 24 Kilogram/ One Square Metre of various size as As directed by One Square 3258 1201
Windows per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of Engineer in charge. Metre
oil painting etc
1225 Doors and 39.32 BDT Providing and fixing CCTW beading of size 40 mm x 20 mm to the door frame including As directed by One Running 152 55
Windows chamfering finishing with 3 coats of oil painting etc. complete Engineer in charge. Metre
1226 Doors and 39.33 BDT Providing and fixing steel frame of angle 50 x 50 x 6 mm size for window with 16 mm As directed by One Square 2938 728
Windows with mild steel bars horizontally at 10 cm c/c for ventilator portion and at 15 cm c/c for Engineer in charge. Metre
remaining portion with M.S. flat of size 40 x 6 mm vertical at center including iron hold
fast boxes for fixing 40 x 6 mm vertical at center including iron hold fast boxes
for fixing 40 x 6 mm vertical at center including iron hold fast boxes for fixing shutters
including welding finishing painting etc. complete.
1227 Doors and 39.34 BDT Providing and fixing steel frame of angle 40 x 40 x 5 mm size for windows with 16 mm As directed by One Square 2283 774
Windows dia. mild steel bars horizontally at 10 cm c/c for ventilator portion and 15 cm c/c for Engineer in charge. Metre
remaining portion with M.S. flat of size 40 x 6 mm vertical at center including iron hold
fast boxes for fixing 40 x 6 mm vertical at center including iron hold fast boxes for fixing
shutters including welding finishing painting etc. complete.
1228 Doors and 39.35 BDT Providing and fixing steel frame door of angle 50 x 50 x 6 mm with mild steel bars 16 mm As directed by One Square 1999 810
Windows dia. horizontally at 10mm c/c for ventilator portion including iron hold fast boxes for Engineer in charge. Metre
fixing shutters including welding, finishing, painting etc. complete.
1229 Doors and 39.36 BDT Providing and fixing steel frame door of angle 40 x 40 x 5 mm with 16 mm dia. mild steel As directed by One Square 1750 810
Windows bars horizontally at 10cm c/c for ventilator portion including iron hold fast for the Engineer in charge. Metre
fixing shutters including welding, painting, finishing etc. complete.
Page 250
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1230 Doors and 39.37 BDT Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of As directed by One Square 5479 1179
Windows two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm Engineer in charge. Metre
at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section
61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side
track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre.
The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417
Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469
Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417
Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417
Kilogram/Running metre. As per detailed drawings and as directed by Engineer in
charge with all necessary Aluminium sections fixtures and fastenings such as roller
bearing in nylon casting and self locking catch fitted in vertical section of shutter
including 5 mm thick plain glass with all required screws and nuts etc, complete. With
colour Anodising with box.
1231 Doors and 39.38 BDT Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of As directed by One Square 5213 1179
Windows two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm Engineer in charge. Metre
at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section
61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side
track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre.
The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417
Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight
0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight
0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight
0.417 Kilogram/Running metre. As per detailed drawings and as directed by
Engineer in charge with all necessary Aluminium sections fixtures and fastenings
such as roller bearing in nylon casting and self locking catch fitted in vertical section of
shutter including 5 mm thick plain glass with all required screws and nuts etc, complete.
With colour Anodising without box
Page 251
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1232 Doors and 39.39 BDT Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of As directed by One Square 5284 1179
Windows two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm Engineer in charge. Metre
at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section
61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side
track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre.
The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417
Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469
Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417
Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417
Kilogram/Running metre. As per detailed drawings and as directed by Engineer in
charge with all necessary Aluminium sections fixtures and fastenings such as roller
bearing in nylon casting and self locking catch fitted in vertical section of shutter
including 5 mm thick plain glass with all required screws and nuts etc, complete. With
powder coating with box
1233 Doors and 39.40 BDT Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of As directed by One Square 4864 1179
Windows two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at Engineer in charge. Metre
weight 0.547 Kilogram/One Running Metre. and window frame bottom track section
61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side
track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre.
The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417
Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469
Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417
Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417
Kilogram/Running metre. As per detailed drawings and as directed by Engineer in
charge with all necessary Aluminium sections fixtures and fastenings such as roller
bearing in nylon casting and self locking catch fitted in vertical section of shutter
including 5 mm thick plain glass with all required screws and nuts etc, complete. With
powder coating without box
Page 252
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1234 Doors and 39.41 BDT Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of As directed by One Square 5502 1415
Windows three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Engineer in charge. Metre
Running Metre. with window frame bottom track section 92 x 31.75 x 1.30
mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x
31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of
bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre.
Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre.
and handle and top section 40 x 18 x 1.25 mm at weight 0.417
Kilogram/Running metre. As per detailed drawings and as directed by
Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as
roller bearing in nylon casting and self locking catch fitted in vertical section of shutter
including 5 mm thick plain glass and aluminium mosquito net shutter with stainless
steel jail with all required screws and nuts etc, complete. With colour Anodising with
box
1235 Doors and 39.42 BDT Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of As directed by One Square 5425 1415
Windows three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Engineer in charge. Metre
Running Metre. with window frame bottom track section 92 x 31.75 x 1.30
mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x
31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of
bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre.
Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre.
and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running
metre. As per detailed drawings and as directed by Engineerincharge
with all necessary Aluminium sections fixtures and fastenings such as roller bearing in
nylon casting and self locking catch fitted in vertical section of shutter including 5 mm
thick plain glass and aluminium mosquito net shutter with stainless steel jail with
all required screws and nuts etc, complete. With colour Anodising without box
Page 253
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1236 Doors and 39.43 BDT Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of As directed by One Square 5367 1415
Windows three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Engineer in charge. Metre
Running Metre. with window frame bottom track section 92 x 31.75 x 1.30
mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x
31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of
bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre.
Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre.
and handle and top section 40 x 18 x 1.25 mm at weight 0.417
Kilogram/Running metre. As per detailed drawings and as directed by
Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as
roller bearing in nylon casting and self locking catch fitted in vertical section of shutter
including 5 mm thick plain glass and aluminium mosquito net shutter with stainless
steel jail with all required screws and nuts etc, complete. With powder coating with box
1237 Doors and 39.44 BDT Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of As directed by One Square 4968 1415
Windows three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Engineer in charge. Metre
Running Metre. with window frame bottom track section 92 x 31.75 x 1.30
mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x
31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of
bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre.
Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre.
and handle and top section 40 x 18 x 1.25 mm at weight 0.417
Kilogram/Running metre. As per detailed drawings and as directed by
Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as
roller bearing in nylon casting and self locking catch fitted in vertical section of shutter
including 5 mm thick plain glass and aluminium mosquito net shutter with stainless
steel jail with all required screws and nuts etc, complete. With powder coating without
box
Page 254
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Doors and 39.45 BDT a) Supplying and fixing in position Aluminium four track sliding windows with outer
Windows frame made from section of over all size 122 mm x 45 mm, bottom section with drain
section track weighing 1.83Kilogramper metre and top and side section of size 122x
31.75 mm weighing 1.15Kilogramper One Running Metre with shutter sections made of
18 mm x 40 mm size having average weight of 0.6Kilogramper One Running Metre (or as
required size) with change in proportionate weight, with 6 mm float glass in three equal
panels and alluminium coated stainless steel mosquito net in one (2/3 of opening)
panel fixed with new neoprene gasket, shutters to be provided with nylon encased
stainless steel rollers, necessary locks and handles complete.
Page 255
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1241 Doors and 39.48 BDT Providing and fixing 34 mm thick moulded door shutter consisting of solid core single As directed by One Square 7419 1042
Windows leaf flush door of 30 mm thickness lipped with 15 mm ( 5mm x 3) thick x 30 mm width Engineer in charge. Metre
on one style and top rail and 10 mm (5mm x 2) thick x 30 mm width on other style and
bottom rails. The inner panels laminated with 2 mm thick termite proof, water
proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and /or
prelim colours on one side after routing the moulded design on flush doors and 2 mm
plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent
cement adhesive on the PVC lipping etc. as per direction of Engineer in charge and
manufacturers specification and drawing etc. complete.
1242 Doors and 39.49 BDT Providing and fixing cold rolled steel hollow door frame 105mm x 60mm for As directed by One Running 2014 441
Windows anysizes including hold fast hinges, tie members with red oxide and gray paint etc. Engineer in charge. Metre
complete as per I.S.I. specifications and code of practice prescribed including
anticorrosive treatment as directed by the engineer.
1243 Doors and 39.50 BDT Providing and fixing in position aluminium openable window of any size as per As directed by One Square 5700 1809
Windows detailed drawing and as directed by Engineer in charge with all necessary Engineer in charge. Metre
aluminum sections including necessary fixtures and fastening with 5 mm thick clear float
glass etc. complete. a) With colour anodizing Note While arriving at the rate of item
of item weight at 6.90 Kilogram/ One Square Metre is considered.
Doors and 39.51 BDT Providing and fixing in position aluminium openable window of any size as per detailed
Windows drawing and as directed by Engineerincharge with all necessary alluminium sections
including necessary fixtures and fastening with 5 mm thick clear float glass etc. complete.
Page 256
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1251 Doors and 39.55 BDT Providing and fixing in position aluminium partly openable and partly fixed window of As directed by One Square 6282 1809
Windows any size as per detailed drawing and as directed by Engineerincharge with all Engineer in charge. Metre
necessary alluminium sections including necessary fixtures and fastening with 5 mm thick
float glass etc. complete.
b) With powder coating Note While arriving at the rate of item of item weight at 6.90
Kilogram/ One Square Metre is considered.
1252 Doors and 39.56 BDT Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame As directed by One Running 1066 413
Windows with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups Engineer in charge. Metre
@250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500
mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm .
1253 Doors and 39.57 BDT Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame As directed by One Running 1144 482
Windows with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 Engineer in charge. Metre
mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long
including primer and oil painting etc, complete) frame size 60 mm x 125 mm
1254 Doors and 39.58 BDT Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS As directed by One Square 3274 695
Windows 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated Engineer in charge. Metre
fixtures and fastening with chromium plated handles on both sides, etc
complete
Page 257
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1255 Doors and 39.59 BDT Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS As directed by One Square 3495 574
Windows 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated Engineer in charge. Metre
fixtures and fastening with chromium plated handles on both sides, etc
complete.
1256 Doors and 39.60 BDT Providing and fixing acrylic plastic sheet panels of approved quality in required As directed by One Square 1706 614
Windows thickness plain clear or any colour or obscured linings in lieu of glass pans to Engineer in charge. Metre
doors/windows including providing and fixing clips, putty etc. complete. (a) 2.00 mm
thick.
1257 Doors and 39.61 BDT Providing and fixing acrylic plastic sheet panels of approved quality in required As directed by One Square 1888 614
Windows thickness plain clear or any colour or obscured linings in lieu of glass pans to Engineer in charge. Metre
doors/windows including providing and fixing clips, putty etc. complete. (b) 3.00 mm
thick.
1258 Doors and 39.62 BDT Providing and fixing 24 gauge plain aluminium sheet on the face of door shutter As directed by One Square 1283 521
Windows including cutting to required size and fixing the screws including making good the Engineer in charge. Metre
damages if any to existing door shutter and frame etc. complete as directed or as per
detailed drawing
1259 Doors and 39.63 BDT Providing and fixing in position, Double shuttered aluminium extruded powder As directed by One Square 8691 2021
Windows coated openable door of specified size with aluminium door frame of powder coated Engineer in charge. Metre
section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated
section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails
47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and
for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side
laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark
, heavy duty, Hydraulic floor spring of 150Kilogramcapacity , having heavy duty
concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length
aluminium tower bolts, 150mm dia. pad handle, etc. as per detailed design and
drawing or as directed by engineer in charge including all materials , labours, and
equipment etc.complete
Page 258
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1260 Doors and 39.64 BDT Providing and fixing in position, Single shuttered aluminium extruded powder As directed by One Square 8152 2620
Windows coated openable door of overall size 0.90 m x 2.40 m with aluminium door frame of Engineer in charge. Metre
powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of
powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00
mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm,
3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and
12mm thick both side laminated phenol bonded particle board panels for bottom panels
etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150Kilogramcapacity , having
heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm
length tower bolts, 150mm diam. pad handle, etc. as per detailed design and drawing or
as directed by engineer in charge including all materials , labours, and equipment
etc.Complete
1261 Doors and 39.65 BDT Providing and fixing in position, Single shuttered aluminium extruded powder As directed by One Square 9387 4068
Windows coated openable door of overall size 0.90 m x 2.40 m with aluminium door frame of Engineer in charge. Metre
powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of
powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00
mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm,
3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and
12mm thick both side laminated phenol bonded particle board panels for bottom panels
etc. , I.S.I. mark , with bijagiri having heavy duty concealed lock, necessary beading,
glazing clips, PVC gaskets, 250mm length tower bolts, 150mm diam. pad handle,
etc. as per detailed design and drawing or as directed by engineer in charge
including all materials , labours, and equipment etc. complete
1262 Doors and 39.66 BDT Providing and fixing 50 mm x 50 mm Mild Steel square pipe framed steel windows of As directed by One Square 3520 1237
Windows various sizes as per details with welded square bars 12 mm at 10 cm center to center Engineer in charge. Metre
without hot dip zinc coating without / with ventilator including fabrication, glazing
with plain / obscured glass panes 5 mm thick of approved type and quality, all fixtures
and fastenings and finishing with one coat of primer complete.
1263 Doors and 39.68 BDT Providing and fixing in position powder coated aluminium louvered windows / ventilator As directed by One Square 3467 1370
Windows of various sizes with powder coating as per detailed drawing and specifications Engineer in charge. Metre
including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet
glass louvers, of approved quality etc. complete.
1264 Doors and 39.69 BDT Providing and fixing partitions made up of CCTW frame of size 75 mm x 50 mm at 60 cm As directed by One Square 5600 924
Windows c/c with 9 mm thick commercial ply and 4mm thick veneer on both sides with French Engineer in charge. Metre
polish etc. complete.
Page 259
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1265 Doors and 39.70 BDT Providing and fixing Country cut teak wood partly veneered and partly glazed partition As directed by One Square 3168 807
Windows with 75 mm x 50 mm frame at 60 cm center and 9 mm thick commercial ply on Engineer in charge. Metre
both sides, decorative veneer of 4 mm thick and plain glass 5 mm thick, including French
polishing etc.complete
1266 Doors and 39.71 BDT Providing and fixing welded mesh of 50 mm x 25 mm and (11 gauge) to Country cut teak As directed by One Square 1771 266
Windows wood frame work as per detailed drawing or as directed, iron fastening with one Engineer in charge. Metre
coat of primer, scaffolding, including TW frame work of 70 mm x 75 mm and covering
CCTW battens of 45 mm x 10 mm etc. complete.
1267 Doors and 39.72 BDT Providng and fixing in position anodised extruded aluminum partitions, partly As directed by One Square 4046 1038
Windows glazed and partly laminated having frame made out of extruded tubular section of size 40 Engineer in charge. Metre
mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded
with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS
128231990, laminated on both sides,Novateakor equivalent and 5 mm thick selected
quality plain/ float glass panels fixed with aluminum glass clips 12 mm x 12 mm and
rubber cushioning beading to glass partitions as per approved drawing etc. compete
1268 Doors and 39.73 BDT Providing and fixing in position extruded aluminium partitions having frame made As directed by One Square 3968 1230
Windows out of extruded tubular section of size 65 mm x 40 mm with 12 mm thick three layered Engineer in charge. Metre
flat pressed teak wood particle board bonded with BWP type exterior grade phenol
formaldehyde synthetic resin conforming to IS 129231990, laminated on both sides,
Novateak or equivalent with aluminium glazing clips of size 12 mm x 12 mm (conical)
as per drawing etc. complete.
1269 Doors and 39.74 BDT Providing and fixing fly proof mesh shutter toventilator / window using CCTW members As directed by One Square 3000 912
Windows of size 45 x 22 mm for frame work and 35 x 22 mm for middle support and fixing fly Engineer in charge. Metre
proof mesh on it and covering TW battens of size 20 x 10 mm including priming and two
coats of oil painting to the new wood and steel work and all labour charges including all
fixture and fastenings etc. complete
1270 Doors and 39.75 BDT Providing coloured anodising treatment to aluminium sections of the doors , windows, As directed by One Square 828 764
Windows and ventilators including all the intermediate supports , side supports, screws and all the Engineer in charge. Metre
necessary fixtures with all leads, lifts, fixing charges etc. complete (Complete
measurement on actual One Square Meterr basis of opening area shall be paid.)
1271 Doors and 39.76 BDT Providing and fixing aluminium grill diamond mesh type DG202 of 7.5 mm thick As directed by One Square 5870 1794
Windows including fixing in position anodised aluminium frame section of 80 x 38 mm x Engineer in charge. Metre
1.22 mm size box, cutting to the required size with all wastage , labour, lead lift etc.
complete.
Page 260
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1272 Doors and 39.77 BDT Providing and fixing in position Mild steel fixed staggered ( Z Type ) Ventilator As directed by One Square 4035 1138
Windows as per detailed drawing with hot deep zink coating including fabricating with Mild steel Engineer in charge. Metre
'Z 'Section of size 20mm x 25 mm and 3 mm thick at weight 1.42 Kilogram/One Running
Metre,with stainless steel mosquito net of 304 Grade,4 mm thick float glass ?as directed
by Engineer In charge including necessary welding, grinding, two coats of oil paint
etc.complete
1273 Doors and 39.78 BDT Providing and fixing in position anodised (as per IS 1868/1982) Aluminium fixed As directed by One Square 3951 1086
Windows staggered ( Z Type) Ventilator with aluminium rectangular pipe 63 mm x 38.10 mm x Engineer in charge. Metre
1.22 mm at weight 0.650 Kilogram/One Running Metre, Aluminium angle of size 15 mm
x 15 mm x 1 mm,aluminium channel of 9 mm sizes, S.S.mosquito net of 304 Grade,4
mm thick float glass per detailed drawing and as directed by Engineer in charge
etc.complete.
1274 Doors and 39.79 BDT Providing and fixing welded mesh of 11 gauge wires having mesh size 50 mm x As directed by One Square 2645 1086
Windows 25 mm including M.S Angle frame of size 35 mm x 35 mm x5 mm in position with oil Engineer in Metre
painting 3 coats etc. complete charge.
1275 Doors and 39.80 BDT Providing and Fixing 32 mm thick One piece single moulded puff As directed by One Square 5451 1899
Windows ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for internal use including Engineer in charge. Metre
toilets made up of outer ABS sheet of 1.2 mm thick having puff insulation of 35
to 40 Kilogram/One Cubic Metredensity and 10 mm dia.for steel bars 2 Nos., wooden
block to receive fixtures, having M.S. hinges 100 mm length, M.S. handles 150 mm
length and 10 mm dia sliding door bolt etc. complete
1276 Doors and 39.81 BDT Providing and fixing 30mm thick SOLID PANEL PVC INTERNAL DOOR As directed by One Square 6306 1042
Windows SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of Engineer in charge. Metre
40mm x 20mm for stiles ,top, lock and bottom rails. M.S. frame shall have a coat of steel
primers of approved make and manufacture. M.S. frame shall be covered with 5mm
thick heat molded PVC channel of size 30 x 100mm forming stiles, and 5mm thick,
125mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 15mm
(5mm x 3) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail.
Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S. frame welded / sealed
to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side,
and joined together with solvent cement adhesive etc. An additional 5mm thick PVC
strip of 20mm width is to be stuck on the interior side of the C Channel using PVC
solvent cement adhesive. including stainless steel fixtures and fastening Complete as per
direction of Engineerincharge,manufacturer'sspecification and drawing.
Page 261
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1277 Doors and 39.82 BDT Providing and fixing 30mm thick PVC FLUSH L DOOR SHUTTER consisting of panel As directed by One Square 6548 1042
Windows of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 Engineer in charge. Metre
gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails
top ?and bottom rails and two 19x 19 mm MS tubes inserted horizontally inside the
hollow profile section using 4/5 mm sheet using screws hollow profile shall be lipped
with 10 mm (5mm x2) thick x 20 mm width on stiles and rails using solvent
cement. The inner panel shall be laminated with 5mm thick termite proof waterproof
plain /prelam PVC sheet using solvent cement on the both sides of the panel
including stainless steel fixtures and fastening etc. Complete as per direction of
Engineer incharge, manufacturers specification and drawing.
1278 Doors and 39.83 BDT Providing and fixing partition 4 mm thick Indian teak Veneer on one side and As directed by One Square 3193 544
Windows 6mm commercial type plywood on the other side including C.T.W. frame of 70 x 35 mm Engineer in charge. Metre
at 60 cm C/C on both ways, including finishing with French polishing to Veneer face and
oil painting / french polishing to other face etc.complete. (without skirting)
1279 Doors and 39.84 BDT Providing and fixing partitions with 12 mm thick three layered flat pressed teakwood BD-T-63 Page One Square 3701 583
Windows particle board both faces commercial bonded with phenol formal dehyde synthetic One Number 518 Metre
resin including CTW vertical 70 x 70 mm and top and bottom rail of 70 x 35 mm and
covering batten of 20 x 10 mm at 1.00 metre apart on both ways or as directed including
finishing with one coat of primer complete.
1280 Doors and 39.85 BDT Providing and fixing partitions with 12 mm thick three layerd flat pressed BD-T-63 Page One Square 4449 583
Windows teakwood commercial board compressed one face and other teak veneer One Number 518 Metre
bonded with phenol formaldehyde synthetic resin including CTW vertical 70 x 70 mm
and top and bottom rail of 70 x 35 mm and covering batten of 20 x 10 mm at 1.00
metre apart on both ways or as directed including finishing with one coat of primer
complete.
1281 Doors and 39.86 BDT Providing and fixing partition with 12mm thick three layered flat pressed veneer teak BD-T-68 Page One Square 2814 897
Windows wood partical board with both faces teak veneer bonded with phenol formaldehyde One Number 520 Metre
synthetic resin including C.T.W. vertical 70 x 70 mm and top and bottom rail of 70 x 35
mm and covering battern of 20 x 10 mm at 1.00 metre apart on both ways or as directed
including finishing with one coat of primer complete.
1282 Doors and 39.87 BDT Providing and fixing in position C.C.T.W. brackets for weather sheds of section 70 x 45 As directed by One Cubic Metre 135716 21886
Windows mm with mortise and tenon joinery at 1.2 to 1.5 metre center to center or as Engineer in charge.
directed and teak wood battens of required section, including fixing three One Numbers
of iron nut and bolts to each bracket, necessary scaffolding and two coats of painting to
wood work etc. complete.
Page 262
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1283 Doors and 39.88 BDT Providing and fixing 22 B.W.G. plain galvanised iron sheets on top of weather As directed by One Square 1052 234
Windows shed, including scaffolding, fixing by means of nut and bolts or as directed etc. complete. Engineer in charge. Metre
(Brackets of 70 x 45 mm to be paid separately)
1284 Doors and 39.89 BDT Providing and fixing 22 B.W.G. plain FRP sheets on top of weather shed, As directed by One Square 4298 234
Windows including scaffolding, fixing by means of nut and bolts or as directed etc. complete. Engineer in charge. Metre
(Brackets of 70 x 45 mm to be paid separately)
1285 Doors and 39.90 BDT Providing and fixing 4 mm thick plain A.C. sheets (of IS std.) on top of the weather As directed by One Square 649 234
Windows shed including scaffolding, fixing by means of nuts and bolts or as directed etc. complete Engineer in charge. Metre
as per detailed drawing (Brackets of 70 x 45 mm to be paid separately).
1286 Doors and 39.92 BDT Providing and fixing country teak wood runner size 150 x 75 mm over partition, As directed by One Running 1344 163
Windows including rounding, fixing in the masonry where necessary beading on sides etc. complete. Engineer in Metre
charge.
1287 Doors and 39.93 BDT Providing and fixing teak wood cover moulding 45 x 20 mm over doors and windows in As directed by One Running 140 39
Windows the required shape and size as per drawing, including all mouldings and finishing Engineer in Metre
with french polishing etc. complete. charge.
1288 Doors and 39.94 BDT Providing and fixing aluminium grill`(5.13 Kilogram/Square Metre) decorative of As directed by One Square 2859 1055
Windows various sizes as per detail drawing and specification etc. complete. (Prior permission to be Engineer in charge. Metre
obtained from S.E. before execution of this item) ( 5.13 Kilogram/ One Square Metre)
1289 Doors and 39.95 BDT Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative As directed by One Square 3784 931
Windows type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both Engineer in charge. Metre
faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts,
chromium plated fixtures and fastenings, with brass mortise lock, chromium plated
handles on both sides, and finishing with French Polish etc. complete.
1290 Doors and 39.96 BDT Providing and fixing Country teak wood Four leaf paneled shutters, 35 mm thick style As directed by One Square 7654 1368
Windows and rail and 25 mm thick panels without ventilator as per detailed drawing Engineer in charge. Metre
excluding the door frame, stainless steel fixtures and fastening and finishing the wood
work with oil painting 3 coats complete
Page 263
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1292 Iron Work 40.02 BDU 1A Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/ One Bd.U.1 Page One One Square 1707 316
Square Metre as per drawing including fixtures necessary welding and painting with Number 537 Metre
one coat of anticorrosive paint and two coats of oil painting complete.
1293 Iron Work 40.03 BDU 2 Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail Bd.U.2 Page One One Square 3173 287
of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, Number 537 Metre
including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-
corrosive paint and two coats of oil painting with approved colour and polishing the sill,
hand rail and the newel post with french polish.
1294 Iron Work 40.04 BDU 2A Providing and fixing mild steel grill railing 15 Kilogram/sq.m with Ghanateak wood hand Bd.U.2 Page One One Square 2792 287
rail of size 75mm x 60 mm and sill of 75mm.x 25mm and newel posts for staircases, Number 537 Metre
including fabricating, fixtures, erecting, painting the grill work with one coat of
anticorrosive paint and two coats of oil painting with approved colours and polishing the
sill, hand rail and the newel post with french polish.
1295 Iron Work 40.05 BDW Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm As directed by One Running 917 176
dia G.I. pipe ( Rezan/ concentiDeleted ire 0.75 mm dia ) with hot dip and G.I. coated Engineer in charge. Metre
hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c
including fixing and fastening with wire, painting M.S. angles with one coat of red lead
primer and two coat of oil paint etc. complete.
1296 Iron Work 40.06 BDW Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in As directed by One Running 1220 286
S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, Engineer Incharge Metre
finishing, buffing to stainless steel pipe etc. complete
1297 Iron Work 40.07 BDW Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm As directed by One Running 4704 476
diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports Engineer Incharge Metre
spaced at 1.5m center to center and 8mm thick toughened glass including
fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to
stainless steel pipe etc. complete
Page 264
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1298 Iron Work 40.08 BDW Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 As directed by One Running 3545 476
mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes Engineer Incharge Metre
of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures
and fastening including pipe base of appropriate diameter and ball base of 75 mm dia
above newel post of 75 mm diameter etc. complete (Prior approval of sample and
brand by Ex.Engineer is necessary before use)
1299 Iron Work 40.09 BDW Providing and fixing mild steel grill railing weighing 15Kilogram/ One Square Metre. As directed by One Square 2889 792
with teak wood hand rail of size 75mm.x 60mm. and sill 75mm.x 25mm.and posts Engineer Incharge Metre
for verandah including fabricating, fixtures, erecting and painting the grill work
with one coat of anticorrosive paint and two coats of oil paint and polishing the grill,
hand rail with French polish. Spec. One Number : Bd.U.3
1300 Iron Work 40.10 BDW Providing and fixing mild steel grill railing weighing 15Kilogram/ One Square Metre. As directed by One Square 2664 792
with PVC handrail cover and newel post for staircases, including fabricating, fixtures, Engineer Incharge Metre
drilling holes in concrete / other surface, erecting the grill work, necessary welding, fixing
by nuts and bolts, fixing PVC handrail cover, with one coat of anticorrosive paint and two
coats of oil painting with approved colour and shade, remaking the damaged surface,
cleaning, etc. complete. Spec. One Number : As directed by Engineer in charge.
1301 Iron Work 40.11 BDW Providing and fixing mild steel grill railing weighing 20Kilogram/ One Square Metre. As directed by One Square 3342 792
with PVC handrail cover and newel post for staircases, including fabricating, fixtures, Engineer Incharge Metre
drilling holes in concrete / other surface, erecting the grill work, necessary welding, fixing
by nuts and bolts, fixing PVC handrail cover, with one coat of anticorrosive paint and two
coats of oil painting with approved colour and shade, remaking the damaged surface,
cleaning, etc. complete.
Spec. One Number : As directed by Engineer in charge.
Page 265
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1303 Water Supply 41.02 BDV 1A Providing and laying cast iron pipes of B class of 100mm diameter with sockets and Bd.V.1 Page One One Running 1629 126
and Sanitary spigot ends/ flanges and cast centrifugally/vertically including specials, laying pipes and Number 547 Metre
Fitting back filling the trench complete including excavation.
1304 Water Supply 41.03 BDV 1B Providing and laying cast iron pipes of B class of 150mm diameter with sockets and Bd.V.1 Page One One Running 3115 460
and Sanitary spiget ends/ flanges and cast centrifugally/ vertically including specials, laying pipes and Number 547 Metre
Fitting back filling the trench complete including excavation.
1305 Water Supply 41.04 BDV 2 Providing and making lead joints for 80mm diameter cast iron pipe line including lead Bd.V.2 Page One One Number 752 421
and Sanitary and testing. Number 549
Fitting
1306 Water Supply 41.05 BDV 2A Providing and making lead joints for 100mm diameter cast iron pipes line including lead Bd.V.2 Page One One Number 819 421
and Sanitary and testing. Number 549
Fitting
1307 Water Supply 41.06 BDV 2B Providing and making lead joints for 150mm diameter cast iron pipe line including lead Bd.V.2 Page One One Number 892 421
and Sanitary and testing Number 549
Fitting
1308 Water Supply 41.07 BDV 3 Providing and making flanged connection for the 80mm diameter cast iron pipe line Bd.V.3 Page One One Number 235 87
and Sanitary including painting rubber insertion, nuts and bolts etc. complete. Number 550
Fitting
1309 Water Supply 41.08 BDV 3A Providing and making flanged connection for the 100mm diameter cast iron pipe Bd.V.3 Page One One Number 297 87
and Sanitary line including painting rubber insertion, nuts and bolts etc. complete. Number 550
Fitting
1310 Water Supply 41.09 BDV 3B Providing and making flanged connection for the 150mm diameter cast iron pipe Bd.V.3 Page One One Number 350 129
and Sanitary line including painting rubber insertion, nuts and bolts etc. complete. Number 550
Fitting
1311 Water Supply 41.10 BDV 5 Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed Bd.V.5 Page One One Running 454 132
and Sanitary as ISI Mark galvanised iron pipes weight of 1.48 Kilogram/metre with necessary Number 551 Metre
Fitting fittings. remaking good the demolished portion and applying primer of anti-corrosive oil
paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary
and conveying and stacking the same in PWD chowky or as directed etc. complete.
Page 266
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1312 Water Supply 41.11 BDV 5 Providing and fixing on walls/ ceiling/ floors 20 mm dia. heavy grade having embossed as Bd.V.5 Page One One Running 493 132
and Sanitary ISI Mark galvanised iron pipes of 1.93 Kilogram/meter with necessary fitting remaking Number 551c Metre
Fitting good the demolished portion and applying primer of anti-corrosive oil paint, 2 coats
Including necessary scaffolding and removing existing pipe line if necessary and
conveying and stacking the same in PWD chowky or as directed etc. complete.
1313 Water Supply 41.12 BDV 5 Providing and fixing on walls/ ceiling/ floors, 25 mm dia. heavy grade having embossed Bd.V.5 Page One One Running 639 132
and Sanitary as ISI Mark galvanised iron pipes weight of 3.01 Kilogram/meter with necessary Number 551 Metre
Fitting fittings . remaking good the demolished portion and applying primer of anti-corrosive oil
paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary
and conveying and stacking the same in PWD chowky or as directed etc. complete.
1314 Water Supply 41.13 BDV 5 Providing and fixing on walls/ ceiling/ floors, 32 mm dia. heavy grade having embossed Bd.V.5 Page One One Running 696 134
and Sanitary as ISI Mark galvanised iron pipes weight of 3.89 Kilogram/meter with necessary Number 551 Metre
Fitting fittings . remaking good the demolished portion and applying primer of anti-corrosive oil
paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary
and conveying and stacking the same in PWD chowky or as directed etc. complete.
1315 Water Supply 41.14 BDV 5 Providing and fixing on walls/ ceiling/ floors, 40 mm dia. heavy grade having embossed Bd.V.5 Page One One Running 769 135
and Sanitary as ISI Mark galvanised iron pipes weight of 4.49 Kilogram/meter with necessary Number 551 Metre
Fitting fittings and remaking good the demolished portion and applying primer of anti-corrosive
oil paint 2 coats Including necessary scaffolding and removing existing pipe line if
necessary and conveying and stacking the same in PWD chowky or as directed etc.
complete.
1316 Water Supply 41.15 BDV 5 Providing and fixing on walls/ ceiling/ floors, 50 mm dia heavy grade having embossed as Bd.V.5Page One One Running 984 137
and Sanitary ISI Mark galvanised iron pipes weight of 6.33 Kilogram/meter with necessary Number 551 Metre
Fitting fittings.and remaking good the demolished portion and primer of anti corrossive oil
paint 2 coats Including necessary scaffolding and removing existing pipe line if
necessary and conveying and stacking the same in PWD chowky or as directed etc.
complete.
1317 Water Supply 41.16 BDV 5 Providing and fixing on walls/ ceiling/ floors, 80 mm dia.heavy grade having embossed as Bd.V.5 Page One One Running 1579 141
and Sanitary ISI Mark galvanised iron pipes weight of 10.15 Kilogram/meter with necessary Number 551 Metre
Fitting fittings. and remaking good the demolished portion and applying primer of anti-corrosive
oil paint 2 coats Including necessary scaffolding and removing existing pipe line if
necessary and conveying and stacking the same in PWD chowky or as directed etc.
complete.
Page 267
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1318 Water Supply 41.17 BDV 5 Providing and fixing on walls/ ceiling/ floors, 100 mm dia.heavy grade having embossed Bd.V.5 Page One One Running 1722 144
and Sanitary as ISI Mark galvanised iron pipes weight of 14.74 Kilogram/meter with necessary fittings. Number 551 Metre
Fitting and remaking good the demolished portion and applying primer of anti-corrosive oil paint
2 coats Including necessary scaffolding and removing existing pipe line if necessary and
conveying and stacking the same in PWD chowky or as directed etc. complete.
1319 Water Supply 41.18 BDV 5 Providing and laying in trenches 15 mm dia. medium grade having embossed as ISI Bd.V.5 Page One One Running 447 186
and Sanitary Mark galvanised iron pipes of 1.25 Kilogram/meter necessary fitting remaking good the Number 551 Metre
Fitting demolished portion with filling trenches and with primer of anti-corrosive oil paint,
2 coats Including removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
1320 Water Supply 41.19 BDV 5 Providing and laying in trenches 20 mm dia. medium grade having embossed as ISI Bd.V.5 Page One One Running 487 186
and Sanitary Mark galvanised iron pipes ?of 1.63 Kilogram/meter necessary fitting remaking Number 551 Metre
Fitting good the demolished portion with filling trenches and with primer of anti-corrosive oil
paint, 2 coats Including removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
1321 Water Supply 41.20 BDV 5 Providing and laying in trenches 25 mm dia. medium grade having embossed as ISI Bd.V.5 Page One One Running 526 186
and Sanitary Mark galvanised iron pipes ?of 2.49 Kilogram/meter necessary fitting remaking Number 551 Metre
Fitting good the demolished portion with filling trenches and with primer of anti-corrosive oil
paint, 2 coats Including removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
1322 Water Supply 41.21 BDV 5 Providing and laying in trenches 32 mm dia.medium grade having embossed as ISI Bd.V.5 Page One One Running 606 225
and Sanitary Mark galvanised iron pipes ?of 3.20 Kilogram/meter necessary fitting remaking Number 551 Metre
Fitting good the demolished portion with filling trenches and with primer of anti-corrosive oil
paint, 2 coats Including removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
1323 Water Supply 41.22 BDV 5 Providing and laying in trenches 40 mm dia. medium grade having embossed as ISI Bd.V.5 Page One One Running 693 240
and Sanitary Mark galvanised iron pipes ?of 3.68 Kilogram/meter necessary fitting remaking Number 551 Metre
Fitting good the demolished portion with filling trenches and with primer of anti-corrosive oil
paint, 2 coats Including removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
Page 268
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1324 Water Supply 41.23 BDV 5 Providing and laying in trenches 50 mm dia. medium grade having embossed as ISI Bd.V.5 Page One One Running 853 249
and Sanitary Mark galvanised iron pipes ?of 5.17 Kilogram/meter necessary fitting remaking Number 551 Metre
Fitting good the demolished portion with filling trenches and with primer of anti-corrosive oil
paint, 2 coats Including removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
1325 Water Supply 41.24 BDV 5 Providing and laying in trenches 80 mm dia. medium grade having embossed as ISI Bd.V.5 Page One One Running 1184 253
and Sanitary Mark galvanised iron pipes ?of 8.57 Kilogram/meter necessary fitting remaking Number 551 Metre
Fitting good the demolished portion with filling trenches and with primer of anti-corrosive oil
paint, 2 coats Including removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
1326 Water Supply 41.25 BDV 5 Providing and laying in trenches 100 mm dia. medium grade having embossed as ISI Bd.V.5 Page One One Running 1562 278
and Sanitary Mark galvanised iron pipes ?of 12.43 Kilogram/meter necessary fitting Number 551 Metre
Fitting remaking good the demolished portion with filling trenches and with primer of anti-
corrosive oil paint , 2 coats Including removing existing pipe line if necessary and
conveying and stacking the same in PWD chowky or as directed etc. complete.
1327 Water Supply 41.26 BDV 7 Providing and fixing 15mm diameter water meter with non-return valve including Bd.V.7 Page One One Number 3770 391
and Sanitary strainer, sockets/ union nut including water meter box making locking arrangement and Number 554
Fitting lock. [Without chamber].
1328 Water Supply 41.27 BDV 7 Providing and fixing 20mm diameter water meter with non-return valve including Bd.V.7 Page One One Number 5034 391
and Sanitary strainer, sockets/ union nut including water meter box making locking arrangement and Number 554
Fitting lock. (without chamber).
1329 Water Supply 41.28 BDV 7 Providing and fixing 25mm diameter water meter with non-return valve including Bd.V.7 Page One One Number 7129 391
and Sanitary strainer, sockets/ union nut and including water meter box making locking Number 554
Fitting arrangement and lock. [Without chamber].
1330 Water Supply 41.29 BDV 7 Providing and fixing 40mm diameter water meter with non-return valve including Bd.V.7 Page One One Number 11831 1172
and Sanitary strainer,sockets/ union nut and including water meter box making locking Number 554
Fitting arrangements and lock. [Withoutchamber].
1331 Water Supply 41.30 BDV 7 Providing and fixing 50mm diameter water meter with non-return valve including Bd.V.7 Page One One Number 15551 1172
and Sanitary strainer,sockets/ union nut and including water meter box making locking Number 554
Fitting arrangement and lock. [without chamber]
1332 Water Supply 41.31 BDV 7 Providing and fixing 80mm diameter water meter with non-return valve including Bd.V.7 Page One One Number 25685 1563
and Sanitary strainer, sockets/ union nut and including water meter box making locking Number 554
Fitting arrangement and lock.[Without chamber].
1333 Water Supply 41.32 BDV 7 Providing and fixing 100mm diameter water meter with non-return valve including Bd.V.7 Page One One Number 36538 1563
and Sanitary strainer, sockets/ union nut and including water meter box making locking Number 554
Fitting arrangements and lock. [Without chamber].
Page 269
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1334 Water Supply 41.40 BDV 8 Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary Bd.V.8 Page One One Number 671 105
and Sanitary socket union nut complete. Number 554
Fitting
1335 Water Supply 41.41 BDV 8 Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary Bd.V.8 Page One One Number 970 105
and Sanitary socket union nut complete. Number 554
Fitting
1336 Water Supply 41.42 BDV 8 Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary Bd.V.8 Page One One Number 1366 105
and Sanitary socket union nut complete. Number 554
Fitting
1337 Water Supply 41.43 BDV 9 Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including Bd.V.9 Page One One Number 516 105
and Sanitary necessary sockets/union nut complete Number 555
Fitting
1338 Water Supply 41.44 BDV 9 Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass Bd.V.9 Page One One Number 640 105
and Sanitary including necessary sockets/union nut complete. Number 555
Fitting
1339 Water Supply 41.45 BDV 9 Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass Bd.V.9 Page One One Number 878 105
and Sanitary including necessary sockets/union nut complete. Number 555
Fitting
1340 Water Supply 41.46 BDV 9 Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass Bd.V.9 Page One One Number 981 117
and Sanitary including necessary sockets/union nut complete. Number 555
Fitting
1341 Water Supply 41.47 BDV 9 Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass Bd.V.9 Page One One Number 1171 117
and Sanitary including necessary sockets/union nut complete. Number 555
Fitting
1342 Water Supply 41.48 BDV 9 Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass Bd.V.9 Page One One Number 1993 141
and Sanitary including necessary sockets/ union nut complete. Number 555
Fitting
1343 Water Supply 41.49 BDV 9 Providing and fixing screw down for 65 mm dia. wheeled stop tap of brass Bd.V.9 Page One One Number 2713 141
and Sanitary including necessary sockets/union nut complete. Number 555
Fitting
1344 Water Supply 41.50 BDV 9 Providing and fixing screw down for 80 mm. dia. wheeled stop tap of brass Bd.V.9 Page One One Number 4290 141
and Sanitary including necessary sockets/union nut complete. Number 555
Fitting
1345 Water Supply 41.51 BDV 12 Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. Bd.V. 12 Page One Number 528 105
and Sanitary supply pipe including necessary bend and socket complete. One Number 556
Fitting
1346 Water Supply 41.52 BDV 14 Providing and fixing 15mm diameter concussion push button type brass/gun metal Bd.V.14 Page One One Number 464 16
and Sanitary self- closing tap including necessary socket complete. Number 557
Fitting
Page 270
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1347 Water Supply 41.53 BDV 14 Providing and fixing 25mm diameter concussion push button type brass/gun metal Bd.V. 14 Page One Number 539 156
and Sanitary self- closing tap including necessary socket complete One Number 557
Fitting
1348 Water Supply 41.54 BDV Providing and fixing push cock (Self closing tap) symet type of 15 mm dia. As directed by One Number 454 156
and Sanitary including necessary socket, testing etc. complete. Engineer- in- charge.
Fitting
1349 Water Supply 41.55 BDV Providing and fixing push cock (Self closing tap) symet type of 20 mm dia. As directed by One Number 466 156
and Sanitary including necessary socket, testing etc. complete. Engineer- in-
Fitting charge.
1350 Water Supply 41.56 BDV 19 Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat Bd. V. 19 Page One One Running 1128 587
and Sanitary stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it Number 559 Metre
Fitting in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the
ladder complete. (Anti
Corossive Paint)
1351 Water Supply 41.57 BDV 23 Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. Bd.V.23 Page One One Number 9774 1251
and Sanitary flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing Number 562
Fitting the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including
lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall
1352 Water Supply 41.58 BDV 23 Providing and fixing White Glazed Earthenware Squatting plate (Ladies Urinal) with Bd.V.23 Page One One Number 4173 1154
and Sanitary P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets Number 562
Fitting for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing
arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face
of the wall
1353 Water Supply 41.59 BDV 23 Providing and fixing coloured glazed earthenware full stall type Urinal with P.V.C. Bd.V.23 Page One One Number 10194 1623
and Sanitary flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap brackets for fixing Number 562
Fitting the cistern 32mm dia. P.V.C. flush pipe with fittings and flushing arrangement including
lead soil pipe, lead trap soil pipe connection up to the outside face of the wall.
1354 Water Supply 41.60 BDV 26 Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with Bd.V.26 Page One One Number 4788 1154
and Sanitary PVC 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the Number 564
Fitting cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap
and soil pipe connection up to the outside face of wall.
1355 Water Supply 41.61 BDV 27 Providing and fixing coloured glazed earthenware lipped flat back/corner type Bd.V.27 Page One One Number 4788 1154
and Sanitary urinal with PVC 5 liters flushing cistern with fittings,capacity with fittings, inlet Number 564
Fitting pipe and stop tap, brackets for fixing the cistern, P.V.C. flush pipe with fittings
including lead soil pipe, lead trap and soil pipe connection up to the outside face of the
wall.
Page 271
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1356 Water Supply 41.62 BDV 29 Providing and laying 100 mm dia. half round white glazed earthenware pipes in Bd.V.29 Page One One Running 447 71
and Sanitary 1:5:10 cement concrete bedding including bends, etc. complete. Number 565 Metre
Fitting
1357 Water Supply 41.63 BDV 30 Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 Bd.V.30 Page One One Number 5599 1935
and Sanitary cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber Number 565
Fitting plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste
pipe and trap up to the outside face of the wall. Making good the damaged surface, testing
etc. complete.
1358 Water Supply 41.64 BDV 30 Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm Bd.V.30 Page One One Number 5750 1935
and Sanitary size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and Number 565
Fitting brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap
up to the outside face of the wall. Making good the damaged surface, testing etc. complete.
1359 Water Supply 41.65 BDV 30 Providing and fixing white glazed earthenware Wash Hand Basin of 63cm x 45cm Bd.V.30 Page One One Number 7015 1935
and Sanitary size including Bib cock stop tap brass heavy 15mm, brackets, rubber plugs and brass Number 565
Fitting chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to
the outside face of the wall.
1360 Water Supply 41.66 BDV 30 Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm Bd.V.30 Page One One Number 5986 1935
and Sanitary size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and Number 565
Fitting brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap
up to the outside face of the wall. Making good the damaged surface, testing etc. complete.
1361 Water Supply 41.67 BDV 30 Providing and fixing coloured glazed earthenware Wash Hand Basin of 45 cm x 30 cm Bd.V.30 Page One One Number 5634 1935
and Sanitary size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and Number 565
Fitting brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap
up to the outside face of the wall. Making good the damaged surface, testing etc. complete.
1362 Water Supply 41.69 BDV Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of BDV.-30 Page One Number 6473 1834
and Sanitary 55x40 cm size including cold water piller taps, brackets, rubber plugs and brass One Number616
Fitting chain, stop tap, chromium plate bottle trap and necessary pipe connections including
UPAC waste pipe and trap upto the outside face of the wall, making good the damaged
surface, testing etc. complete.
1363 Water Supply 41.70 BDV Providing and fixing White glazed with bottle trap earthenware Wash Hand BDV.-30 Page One Number 7113 1834
and Sanitary Basin of 63x45 cm size including cold water piller taps, brackets, rubber plugs and brass One Number616
Fitting chain, stop tap, chromium plate bottle trap and necessary pipe connections including
UPAC waste pipe and trap upto the outside face of the wall, making good the
damaged surface, testing etc. complete.
Page 272
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1364 Water Supply 41.72 BDV Providing and fixing Coloured glazed with bottle trap earthenware Wash Hand BDV.-30 Page One Number 6089 1834
and Sanitary Basin of 55x40 cm. size including cold water piller taps, brackets, rubber plugs and brass One Number616
Fitting chain, stop tap, chromium plate bottle trap and necessary pipe connections including
UPAC waste pipe and trap upto the outside face of the wall, making good the
damaged surface, testing etc. complete.
1365 Water Supply 41.74 BDV 30 Providing and fixing coloured glazed earthenware Wash Hand Basin of 63 cm x 45 cm Bd.V.30 Page One One Number 6075 1563
and Sanitary size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and Number 565
Fitting brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap
up to the outside face of the wall.
1366 Water Supply 41.75 BDV 31 Providing and fixing white glazed earthenware sink 600mm x 200mm x 450mm including Bd.V.31 Page One One Number 5675 1834
and Sanitary all connection of the G.I. supply and P.V.C. waste pipes up to the outside face of the wall, Number566
Fitting cold water chromium plated screw down bib tap, rolled steel or C.I. brackets,
rubber plug with chain and stop tap complete.
1367 Water Supply 41.76 BDV 31 Providing and fixing white glazed earthenware sink 450mm x 200mm x 300mm including Bd.V.31 Page One One Number 4243 1834
and Sanitary all connection of the G.I. supply and lead waste pipes up to the outside face of the wall, Number566
Fitting cold water chromium plated screw down bib tap, rolled steel or C.I. brackets,
rubber plug with chain and stop tap complete.
1368 Water Supply 41.77 BDV Providing and fixing Autoclosing pillar cock of pressmatic tap of approved make As directed by One Number 2612 391
and Sanitary or equivalent including all fixtures, fittings etc. complete. Engineer in charge.
Fitting
1369 Water Supply 41.78 BDV Providing and constructing granite kitchen platform with fixing of stainless steel sink As directed by One Square 9827 1396
and Sanitary 600 mm x 450 mm size as per detailed drawing including vertical both side polished Engineer in charge. Metre
Fitting kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and
polished granite 16 to 20 mm top with side strips of granite at front and both sides of
platform raised with two vertical granite supports 15 cm height and top granite of
75 x 40 cm including cutting, opening for sink of required size in kadappah as well as
granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)
1370 Water Supply 41.79 BDV 32 Providing and fixing 8 cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. Bd.V.32 Page One One Number 811 313
and Sanitary pipe upto the outside face of the wall complete. Number567
Fitting
1371 Water Supply 41.80 BDV 32 Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of Bd.V.32 Page One One Number 1127 313
and Sanitary C.I. pipe upto the outside face of the wall complete. Number567
Fitting
Page 273
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1382 Water Supply 42.11 BDV 43 Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x Bd.V.43 Page One One Number 14570 1887
and Sanitary 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels Number 574
Fitting half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of
75Kilogramwith lid and frame fixed in cement concrete.
Page 274
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1383 Water Supply 42.12 BDV 43 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x Bd.V.43, Page One One Number 9160 1662
and Sanitary 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels Number 574
Fitting half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in
cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.
1384 Water Supply 42.13 BDV 43 Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x Bd.V.43, Page One One Number 10777 1902
and Sanitary 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels Number 574
Fitting half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in
cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.
1385 Water Supply 42.14 BDV 44 Providing and constructing Brick Masonry inspection Chamber 90cm x 45cm including Bd.V.44, Page One One Number 15181 1887
and Sanitary 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, Number 575
Fitting salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement
concrete block, brick masonry plastering inside and Outside, with C.I. lead cover of
75Kilogramwith frame fixed in cement concrete.
1386 Water Supply 42.15 BDV 44 Providing and constructing Brick Masonry inspection trap Chamber 90cm x 45cm Bd.V.44, Page One One Number 11284 1887
and Sanitary including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe Number 575
Fitting channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8
cement concrete block, brick masonry plastering inside and Outside, fixed in
cement concrete with R.C.C. Cover medium duty 140 Kilogram. etc complete
1387 Water Supply 42.16 BDV Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm With Bd.V.43 Page One One Number 9953 3184
and Sanitary R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete Number 574
Fitting channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75
mm thick R.C.C. cover medium duty 100Kilogrametc. complete.
1388 Water Supply 42.17 BDV Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm With Bd.V.43 Page One One Number 12130 3810
and Sanitary R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete Number 574
Fitting channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight
with 75 mm thick R.C.C. cover medium duty 140Kilogrametc. complete.
1389 Water Supply 42.18 BDV 45 Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap Bd.V.45, Page One One Number 16726 3896
and Sanitary including necessary (including excavation and laying) Number 575
Fitting
1390 Water Supply 42.19 BDV 46 Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling Bd.V.46, Page One One Number 2952 1122
and Sanitary with brick-bats. Number 576
Fitting
Page 275
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1391 Water Supply 42.20 BDV Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm As directed by One Number 861 188
and Sanitary dia. nickel plated towel rod etc. complete. Engineer in
Fitting charge.
1392 Water Supply 42.21 BDV 60 Providing, laying and fixing P.V.C. pipe of 15mm dia. with fittings such as bends, As directed by One Running 82 31
and Sanitary tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Engineer in charge. Metre
Fitting Including removing existing pipe line if necessary and conveying and stacking the
same in PWD chowky or as directed etc. complete.
1393 Water Supply 42.22 BDV 60 Providing, laying and fixing P.V.C. pipe of 20mm dia. with fittings such as bends, As directed by One Running 126 31
and Sanitary tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Engineer in charge. Metre
Fitting Including removing existing pipe line if necessary and conveying and stacking the
same in PWD chowky or as directed etc. complete.
1394 Water Supply 42.23 BDV 60 Providing, laying and fixing P.V.C. pipe of 25mm dia. with fittings such as bends, As directed by One Running 157 31
and Sanitary tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Engineer in charge. Metre
Fitting Including removing existing pipe line if necessary and conveying and stacking the
same in PWD chowky or as directed etc. complete.
1395 Water Supply 42.24 BDV 60 Providing, laying and fixing P.V.C. pipe of 32mm dia. with fittings such as bends, As directed by One Running 226 31
and Sanitary tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Engineer in charge. Metre
Fitting Including removing existing pipe line if necessary and conveying and stacking the
same in PWD chowky or as directed etc. complete.
1396 Water Supply 42.25 BDV 60 Providing, laying and fixing P.V.C. pipe of 40mm dia. with fittings such as bends, As directed by One Running 301 39
and Sanitary tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Engineer in charge. Metre
Fitting Including removing existing pipe line if necessary and conveying and stacking the
same in PWD chowky or as directed etc. complete.
1397 Water Supply 42.26 BDV 60 Providing, laying and fixing P.V.C. pipe of 50mm dia. with fittings such as bends, As directed by One Running 422 47
and Sanitary tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Engineer in charge. Metre
Fitting Including removing existing pipe line if necessary and conveying and stacking the
same in PWD chowky or as directed etc. complete.
1398 Water Supply 42.27 BDV 60 Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, As directed by One Running 431 47
and Sanitary tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Engineer in charge. Metre
Fitting Including removing existing pipe line if necessary and conveying and stacking the
same in PWD chowky or as directed etc. complete.
Page 276
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1399 Water Supply 42.28 BDV 60 Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, As directed by One Running 594 47
and Sanitary tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Engineer in charge. Metre
Fitting Including removing existing pipe line if necessary and conveying and stacking the
same in PWD chowky or as directed etc. complete.
1400 Water Supply 42.29 BDV Providing and fixing partition with kadappa stone of all sizes and 25 mm thick polished As directed by One Square 1062 207
and Sanitary on both side and edges to original including fixing in position in cement mortor 1:4 curing Engineer in Metre
Fitting polish- ing, cleaning etc complete. charge.
1401 Water Supply 42.30 BDV Providing and fixing Orissa type white glazed earthenware 575 mm water closet As directed by One Number 4007 2368
and Sanitary pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside Engineer in charge.
Fitting face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its
accessories etc. complete.
1402 Water Supply 42.31 BDV Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length As directed by One Number 299 34
and Sanitary including all accessories complete. Engineer in charge.
Fitting
1403 Water Supply 42.32 BDV Providing and Fixing half turn 25 mm dia gun metal flushing cock including all As directed by One Number 953 78
and Sanitary accessories etc. complete. Engineer in
Fitting charge.
1404 Water Supply 42.33 BDV Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm As directed by One Number 7388 1786
and Sanitary dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall Engineer in charge.
Fitting (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all
necessary pipe connection etc. complete.
1405 Water Supply 42.34 BDV Providing and fixing European type white glazed earthenware coupled closet symphonic As directed by One Number 11200 2142
and Sanitary trap with symphonic low level white glazed 10 litres cistern with black backlite Engineer in charge.
Fitting seat with all necessary pipe connection etc. complete.
1406 Water Supply 42.35 BDV Providing and fixing orissa type colour glazed earthenware 625 x 450 mm. w.c. pan As directed by One Number 10140 2111
and Sanitary including trap, C.I. soil and vent pipe upto the out side face of wall including 100 mm. Engineer in charge.
Fitting dia. C.I. plug, bend, 15mm. thick 10 litre PVC flushing cistern with all necessary
pipe connection etc. complete.
1407 Water Supply 42.36 BDV Providing and fixing 40 mm. dia Ball cock medium type with PVC float including As directed by One Number 1210 82
and Sanitary sockets and necessary fittings and tested as per municipal requirements etc. complete. Engineer in
Fitting charge.
1408 Water Supply 42.37 BDV Providing and fixing 15 mm. dia Ball cock medium type with PVC float including As directed by One Number 487 82
and Sanitary sockets and necessary fittings and tested as per municipal requirement etc. complete. Engineer in charge.
Fitting
Page 277
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1409 Water Supply 42.38 BDV Cleaning elevated water storage Reservoir within a given period, by using bleaching As directed by One Number 488 319
and Sanitary powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of Engineer in charge.
Fitting 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster,
bailing out water etc. complete. i)Tank capacity up to 2,000 litre.
1410 Water Supply 42.39 BDV Cleaning elevated water storage Reservoir within a given period, by using bleaching As directed by One Number 615 357
and Sanitary powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of Engineer in charge.
Fitting 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster,
bailing out water etc. complete. ii) Tank capacity up to 2,001 to 5000 litre.
1411 Water Supply 42.40 BDV Cleaning elevated water storage Reservoir within a given period, by using bleaching As directed by One Number 646 357
and Sanitary powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of Engineer in charge.
Fitting 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster,
bailing out water etc. complete. iii) Tank capacity up to 5,001 to 7000 litre.
1412 Water Supply 42.41 BDV Cleaning elevated water storage Reservoir within a given period, by using bleaching As directed by One Number 813 395
and Sanitary powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of Engineer in charge.
Fitting 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster,
bailing out water etc. complete. iv) Tank capacity up to 7,001 to 10000 litre.
1413 Water Supply 42.42 BDV Cleaning elevated water storage Reservoir within a given period, by using bleaching As directed by One Number 975 513
and Sanitary powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of Engineer in charge.
Fitting 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster,
bailing out water etc. complete. v) Tank capacity upto 10,001 to 15,000 litre.
1414 Water Supply 42.43 BDV Cleaning elevated water storage Reservoir within a given period, by using bleaching As directed by One Number 1537 941
and Sanitary powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of Engineer in charge.
Fitting 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster,
bailing out water etc. complete. vi) Tank capacity upto 15,001 to 20,000 litre.
1415 Water Supply 42.44 BDV Cleaning elevated water storage Reservoir within a given period, by using bleaching As directed by One Number 2408 1556
and Sanitary powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of Engineer in charge.
Fitting 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster,
bailing out water etc. complete. vii) Tank capacity upto 20,001 to 30,000 litre.
Page 278
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1416 Water Supply 42.45 BDV Cleaning elevated water storage Reservoir within a given period, by using bleaching As directed by One Number 2640 1746
and Sanitary powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of Engineer in charge.
Fitting 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster,
bailing out water etc. complete. viii) Tank capacity upto 30,001 to 40,000 litre
1417 Water Supply 42.46 BDV Cleaning elevated water storage Reservoir within a given period, by using bleaching As directed by One Number 3607 2399
and Sanitary powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of Engineer in charge.
Fitting 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster,
bailing out water etc. complete. ix) Tank capacity up to 40,001 to 50000 litre.
1418 Water Supply 42.47 BDV Cleaning elevated water storage Reservoir within a given period, by using bleaching As directed by 1000 Litre 58 40
and Sanitary powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of Engineer in charge.
Fitting 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster,
bailing out water etc. complete. x) capacity 50,001 litre to one lakh.
1419 Water Supply 42.48 BDV Cleaning elevated water storage Reservoir within a given period, by using bleaching As directed by 1000 Litre 31 24
and Sanitary powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of Engineer in charge.
Fitting 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster,
bailing out water etc. complete. xi) Capacity above one lakh upto 4.00 lakh
1420 Water Supply 42.49 BDV Cleaning elevated water storage Reservoir within a given period, by using bleaching As directed by 1000 Litre 25 19
and Sanitary powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of Engineer in charge.
Fitting 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster,
bailing out water etc. complete. xii) Capacity above 4.00 lakh upto 7.00 lakh .
1421 Water Supply 42.50 BDV Cleaning elevated water storage Reservoir within a given period, by using bleaching As directed by 1000 Litre 21 15
and Sanitary powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of Engineer in charge.
Fitting 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster,
bailing out water etc. complete. xiii) Capacity above 7.00 lakh upto 12.00
lakh.
1422 Water Supply 42.51 BDV Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and As directed by One Running 607 159
and Sanitary with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, Engineer in Metre
Fitting clamps etc. complete charge.
1423 Water Supply 42.52 BDV Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and As directed by One Running 788 159
and Sanitary with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, Engineer in Metre
Fitting clamps etc. complete. charge.
Page 279
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1424 Water Supply 42.53 BDV Providing and fixing H.D.P container one piece moulded water tank made out of high As directed by One Litre 14 2
and Sanitary density polythyler and built corrugated inclusive of delivery up to destination hoisting and engineer-in- charge.
Fitting fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks
capacity between 200 to 1000 liters
1425 Water Supply 42.54 BDV Providing and fixing H.D.P container one piece moulded water tank made out of low As directed by One Litre 11 1
and Sanitary density polythyler and built corrugation including of delivery up to destination engineer-in- charge.
Fitting hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity
above 1000 to 20,000 litres
1426 Water Supply 42.55 BDV Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary BD.V 5 page One Running 266 177
and Sanitary fittings, remaking good the demolished portion etc. complete. Including removing existing 551 and as directed Metre
Fitting pipe line if necessary and conveying and stacking the same in PWD chowky or as directed by Engineer in
etc. complete. charge
1427 Water Supply 42.56 BDV 5 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary BD.V 5 page One Running 310 185
and Sanitary fittings, remaking good the demolished portion etc. complete. Including removing existing 551 and as directed Metre
Fitting pipe line if necessary and conveying and stacking the same in PWD chowky or as directed by Engineer in
etc. complete. charge
1428 Water Supply 42.57 BDV 5 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary BD.V 5 page One Running 375 185
and Sanitary fittings, remaking good the demolished portion etc. complete. Including removing existing 551 and as directed Metre
Fitting pipe line if necessary and conveying and stacking the same in PWD chowky or as directed by Engineer in
etc. complete. charge
1429 Water Supply 42.58 BDV 5 Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary BD.V 5 page One Running 431 185
and Sanitary fittings, remaking good the demolished portion etc. complete. Including removing existing 551 and as directed Metre
Fitting pipe line if necessary and conveying and stacking the same in PWD chowky or as directed by Engineer in
etc. complete. charge
1430 Water Supply 42.59 BDV 5 Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary BD.V 5 page One Running 539 185
and Sanitary fittings, remaking good the demolished portion etc. complete. Including removing existing 551 and as directed Metre
Fitting pipe line if necessary and conveying and stacking the same in PWD chowky or as directed by Engineer in
etc. complete. charge
1431 Water Supply 42.60 BDV 5 Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary BD.V 5 page One Running 741 185
and Sanitary fittings, remaking good the demolished portion etc. complete. 551 and as directed Metre
Fitting by Engineer in
charge
1432 Water Supply 42.61 BDV 5 Providing and laying in trenches 15 mm dai. CPVC pipe including necessary BD.V 5 page One Running 273 188
and Sanitary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe 551 and as directed Metre
Fitting line if necessary and conveying and stacking the same in PWD chowky or as directed etc. by Engineer in
complete. charge
Page 280
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1433 Water Supply 42.62 BDV 5 Providing and laying in trenches 20 mm dai. CPVC pipe including necessary BD.V 5 page One Running 311 190
and Sanitary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe 551 and as directed Metre
Fitting line if necessary and conveying and stacking the same in PWD chowky or as directed etc. by Engineer in
complete. charge
1434 Water Supply 42.63 BDV 5 Providing and laying in trenches 25 mm dai. CPVC pipe including necessary BD.V 5 page One Running 423 233
and Sanitary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe 551 and as directed Metre
Fitting line if necessary and conveying and stacking the same in PWD chowky or as directed etc. by Engineer in
complete. charge
1435 Water Supply 42.64 BDV 5 Providing and laying in trenches 32 mm dai. CPVC pipe including necessary BD.V 5 page One Running 479 233
and Sanitary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe 551 and as directed Metre
Fitting line if necessary and conveying and stacking the same in PWD chowky or as directed etc. by Engineer in
complete. charge
1436 Water Supply 42.65 BDV 5 Providing and laying in trenches 40mm dai. CPVC pipe including necessary BD.V 5 page One Running 587 233
and Sanitary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe 551 and as directed Metre
Fitting line if necessary and conveying and stacking the same in PWD chowky or as directed etc. by Engineer in
complete. charge
1437 Water Supply 42.66 BDV 5 Providing and laying in trenches 50mm dai. CPVC pipe including necessary BD.V 5 page One Running 783 233
and Sanitary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe 551 and as directed Metre
Fitting line if necessary and conveying and stacking the same in PWD chowky or as directed etc. by Engineer in
complete. charge
1438 Water Supply 42.67 BDV 32 Providing and fixing 10 cm PVC nahani trap with grating etc. complete. BD.V 32 A page One Number 539 313
and Sanitary 551 and as directed
Fitting by Engineer in
charge
1439 Water Supply 42.68 BDV Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame As directed by One Number 5641 353
and Sanitary over inspection chamber etc. complete. Heavy duty (225 Kilogram) Engineer in
Fitting charge.
1440 Water Supply 42.69 BDV Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame As directed by One Number 4072 602
and Sanitary over inspection chamber etc. complete. Medium duty (140 Kilogram) Engineer in
Fitting charge.
1441 Water Supply 42.70 BDV Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame As directed by One Number 5336 564
and Sanitary over inspection chamber etc. complete. Heavy duty (160 Kilogram) Engineer in
Fitting charge.
Page 281
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1442 Water Supply 42.71 BDV Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame As directed by One Number 3575 564
and Sanitary over inspection chamber etc. complete.Medium duty (100 Kilogram) Engineer in
Fitting charge.
1443 Water Supply 42.72 BDV 4 Providing and making ISI Mark ferrule connection of 15 mm dia. to water main Bd.V. 4 page 551 One Number 1248 502
and Sanitary including ferrule coupling cast iron bell mouth cover, built in non return valve and
Fitting fixing including excavation and reinstatement complete.
1444 Water Supply 42.73 BDV 4 Providing and making ISI Mark ferrule connection of 20 mm dia. to water main Bd.V. 4 page 551 One Number 1702 502
and Sanitary including ferrule coupling cast iron bell mouth cover, built in non return valve and
Fitting fixing including excavation and reinstatement complete.
1445 Water Supply 42.74 BDV 4 Providing and making ISI Mark ferrule connection of 25mm dia.to water main Bd.V. 4 page 551 One Number 2517 502
and Sanitary including ferrule coupling cast iron bell mouth cover, built in non return valve and
Fitting fixing including excavation and reinstatement complete.
1446 Water Supply 42.75 BDV 4 Providing and making ISI Mark ferrule connection of 32 mm dia. to water main Bd.V. 4 page 551 One Number 3955 502
and Sanitary including ferrule coupling cast iron bell mouth cover, built in non return valve and
Fitting fixing including excavation and reinstatement complete.
1447 Water Supply 42.76 BDV 4 Providing and making ISI Mark ferrule connection of 40mm dia. to water main Bd.V. 4 page 551 One Number 5440 502
and Sanitary including ferrule coupling cast iron bell mouth cover, built in non return valve and
Fitting fixing including excavation and reinstatement complete.
1448 Water Supply 42.77 BDV 4 Providing and making ISI Mark ferrule connection of 50 mm dia. to water main Bd.V. 4 page 551 One Number 8944 502
and Sanitary including ferrule coupling cast iron bell mouth cover, built in non return valve and
Fitting fixing including excavation and reinstatement complete.
1449 Water Supply 42.78 BDV 4 Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng As directed by One Number 19900 2782
and Sanitary coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. Engineer in
Fitting charge
1450 Water Supply 42.79 BDV Providing and fixing C.P. Angular stop clock with wall flange of approved make As directed by One Number 2687 238
and Sanitary continental including necessary sockets/union nut etc. complete. Engineer in charge
Fitting
1451 Water Supply 42.80 BDV Providing and fixing C.P.Two way BIB cock of approved make continental As directed by One Number 1459 238
and Sanitary including necessary sockets/union nut etc. complete. Engineer in
Fitting charge
1452 Water Supply 42.81 BDV Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm As directed by One Number 4738 476
and Sanitary long bend pipe and wall flange of approved make including necessary sockets/union Engineer in
Fitting nut etc. charge
complete.
1453 Water Supply 42.82 BDV Providing and fixing C.P. pillar cock long neck with aerator of approed make As directed by One Number 1625 238
and Sanitary including necessary sockets/union nut etc. complete. Engineer in
Fitting charge
Page 282
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1454 Water Supply 42.83 BDV Providing and fixing C.P. BIB cock with wall flange of approved make including As directed by One Number 1108 279
and Sanitary necessary sockets/ union nut etc. complete. Engineer in
Fitting charge
1455 Water Supply 42.84 BDV Providing and fixing C.P. sink cock with raised J" shaped swinging casted spout As directed by One Number 2145 238
and Sanitary ofapproved make including necessary sockets/ union nut etc. complete." Engineer in
Fitting charge
1456 Water Supply 42.85 BDV Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and As directed by One Running 1481 239
and Sanitary having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including Engineer Incharge Metre
Fitting proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as,
offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting
25mm to 40mm from face of wall a fixing with clips of approved quality and One Number
,filing the joint using rubber gasket with solvent cement and properly resting the shoe
of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance
for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2
piece socket clips shall be got approved from engineer in charge etc. complete.
1457 Water Supply 42.86 BDV Providing and fixing European type wall-hung white water closet of approved As directed by One Number 15026 2120
and Sanitary make with push valve concealed type with cover plate 32mm size of approved make Engineer Incharge
Fitting including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug
bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete.
1458 Water Supply 42.87 BDV Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and As directed by One Running 569 159
and Sanitary having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including Engineer Incharge Metre
Fitting proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as,
offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting
25mm to 40mm from face of wall a fixing with clips of approved quality and One Number
,filing the joint using rubber gasket with solvent cement and properly resting the shoe
of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance
for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2
piece socket clips shall be got approved from engineer in charge etc. complete.
1459 Water Supply 42.88 BDV Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size As directed by One Number 8799 159
and Sanitary and of special colour shade having telephonic black / coloured granite of 180 mm Engineer in charge
Fitting thick stone black kadappa framework including chromium plated coupling bottle -
Trap using CERA company or equivalent oval typa wash basin model no 3448 as
per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m
x 0.60 m )
Page 283
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1460 Water Supply 42.89 BDV Providing and fixing on walls/ ceiling/ floor 15 mm dia. uPVC pipe with necessary BD.V 5 page One Running 245 177
and Sanitary fittings, remaking good the demolished portion etc. complete. Including removing existing 551 and as directed Metre
Fitting pipe line if necessary and conveying and stacking the same in PWD chowky or as directed by Engineer in
etc. complete. charge
1461 Water Supply 42.90 BDV 5 Providing and fixing on walls/ceiling/floor 20 mm dia. uPVC pipe with necessary BD.V 5 page One Running 289 185
and Sanitary fittings, remaking good the demolished portion etc. complete. Including removing existing 551 and as directed Metre
Fitting pipe line if necessary and conveying and stacking the same in PWD chowky or as directed by Engineer in
etc. complete. charge
1462 Water Supply 42.91 BDV 5 Providing and fixing on walls/ ceiling/ floor 25 mm dia. uPVC pipe with necessary BD.V 5 page One Running 355 185
and Sanitary fittings, remaking good the demolished portion etc. complete. Including removing existing 551 and as directed Metre
Fitting pipe line if necessary and conveying and stacking the same in PWD chowky or as directed by Engineer in
etc. complete. charge
1463 Water Supply 42.92 BDV 5 Providing and fixing on walls/ ceiling/ floor 32 mm dia. uPVC pipe with necessary BD.V 5 page One Running 412 185
and Sanitary fittings, remaking good the demolished portion etc. complete. Including removing existing 551 and as directed Metre
Fitting pipe line if necessary and conveying and stacking the same in PWD chowky or as directed by Engineer in
etc. complete. charge
1464 Water Supply 42.93 BDV 5 Providing and fixing on walls /ceiling/ floor 40 mm dia. uPVC pipe with necessary BD.V 5 page One Running 520 185
and Sanitary fittings, remaking good the demolished portion etc. complete. Including removing existing 551 and as directed Metre
Fitting pipe line if necessary and conveying and stacking the same in PWD chowky or as directed by Engineer in
etc. complete. charge
1465 Water Supply 42.94 BDV 5 Providing and fixing on walls/ ceiling/ floor 50 mm dia. uPVC pipe with necessary BD.V 5 page One Running 722 185
and Sanitary fittings, remaking good the demolished portion etc. complete. 551 and as directed Metre
Fitting by Engineer in
charge
1466 Water Supply 42.95 BDV 5 Providing and laying in trenches 15 mm dai. uPVC pipe including necessary BD.V 5 page One Running 253 188
and Sanitary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe 551 and as directed Metre
Fitting line if necessary and conveying and stacking the same in PWD chowky or as directed etc. by Engineer in
complete. charge
1467 Water Supply 42.96 BDV 5 Providing and laying in trenches 20 mm dai. uPVC pipe including necessary BD.V 5 page One Running 291 190
and Sanitary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe 551 and as directed Metre
Fitting line if necessary and conveying and stacking the same in PWD chowky or as directed etc. by Engineer in
complete. charge
1468 Water Supply 42.97 BDV 5 Providing and laying in trenches 25 mm dai. uPVC pipe including necessary BD.V 5 page One Running 403 233
and Sanitary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe 551 and as directed Metre
Fitting line if necessary and conveying and stacking the same in PWD chowky or as directed etc. by Engineer in
complete. charge
Page 284
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1469 Water Supply 42.98 BDV 5 Providing and laying in trenches 32 mm dai. uPVC pipe including necessary BD.V 5 page One Running 460 233
and Sanitary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe 551 and as directed Metre
Fitting line if necessary and conveying and stacking the same in PWD chowky or as directed etc. by Engineer in
complete. charge
1470 Water Supply 42.99 BDV 5 Providing and laying in trenches 40mm dai. uPVC pipe including necessary BD.V 5 page One Running 568 233
and Sanitary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe 551 and as directed Metre
Fitting line if necessary and conveying and stacking the same in PWD chowky or as directed etc. by Engineer in
complete. charge
1471 Water Supply 42.100 BDV 5 Providing and laying in trenches 50mm dai. uPVC pipe including necessary BD.V 5 page One Running 765 233
and Sanitary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe 551 and as directed Metre
Fitting line if necessary and conveying and stacking the same in PWD chowky or as directed etc. by Engineer in
complete. charge
Page 285
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Page 286
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1478 Water Supply 43.07 BDV 5 Providing and laying in walls/ceilings/floors 80 mm dia. medium grade having embossed Bd.V.5 Page One One Running 1260 141
and Sanitary as ISI Mark galvanised iron pipes of 8.57 Kilogram/metre necessary fitting remaking good Number 551 Metre
Fitting the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2
coats complete. Including necessary scaffolding and removing existing pipe line if
necessary and conveying and stacking the same in PWD chowky or as directed etc.
complete.
1479 Water Supply 43.08 BDV 5 Providing and laying in walls/ceilings/floors 100 mm dia. medium grade having embossed Bd.V.5 Page One One Running 1439 144
and Sanitary as ISI Mark galvanised iron pipes of 12.43 Kilogram/metre necessary fitting remaking Number 551 Metre
Fitting good the demolished portion with filling trenches and with primer of anti-corrosive oil
paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line
if necessary and conveying and stacking the same in PWD chowky or as directed etc.
complete.
1480 Water Supply 43.09 BDV 5 Providing and laying in trenches 15 mm dia.heavy grade having embossed as ISI Bd.V.5 Page One One Running 483 186
and Sanitary Mark galvanised iron pipes of 1.48 Kilogram/metre necessary fitting remaking good the Number 551 Metre
Fitting demolished portion with filling trenches and with primer of anti-corrosive oil paint ,
2 coats complete. Including removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
1481 Water Supply 43.10 BDV 5 Providing and laying in trenches 20 mm dia. heavy grade having embossed as ISI Bd.V.5 Page One One Running 562 230
and Sanitary Mark galvanised iron pipes of 1.93 Kilogram/metre necessary fitting remaking good the Number 551 Metre
Fitting demolished portion with filling trenches and with primer of anti-corrosive oil paint ,
2 coats complete. Including removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
1482 Water Supply 43.11 BDV 5 Providing and laying in trenches 25 mm dia. heavy grade having embossed as ISI Bd.V.5 Page One One Running 645 231
and Sanitary Mark galvanised iron pipes of 3.01 Kilogram/metre necessary fitting remaking good the Number 551 Metre
Fitting demolished portion with filling trenches and with primer of anti-corrosive oil paint ,
2 coats complete. Including removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
1483 Water Supply 43.12 BDV 5 Providing and laying in trenches 32 mm dia. heavy grade having embossed as ISI Bd.V.5 Page One One Running 683 231
and Sanitary Mark galvanised iron pipes of 3.89 Kilogram/metre necessary fitting remaking good the Number 551 Metre
Fitting demolished portion with filling trenches and with primer of anti-corrosive oil paint ,
2 coats complete. Including removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
Page 287
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1484 Water Supply 43.13 BDV 5 Providing and laying in trenches 40 mm dia. heavy grade having embossed as ISI Bd.V.5 Page One One Running 760 240
and Sanitary Mark galvanised iron pipes of 4.49 Kilogram/metre necessary fitting remaking good the Number 551 Metre
Fitting demolished portion with filling trenches and with primer of anti-corrosive oil paint ,
2 coats complete. Including removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
1485 Water Supply 43.14 BDV 5 Providing and laying in trenches 50 mm dia. heavy grade having embossed as ISI Bd.V.5 Page One One Running 948 250
and Sanitary Mark galvanised iron pipes of 6.33 Kilogram/metre necessary fitting remaking good the Number 551 Metre
Fitting demolished portion with filling trenches and with primer of anti-corrosive oil paint ,
2 coats complete. Including removing existing pipe line if necessary and conveying and
stacking the same in PWD chowky or as directed etc. complete.
1486 Water Supply 43.15 BDV 5 Providing and laying in trenches 80 mm dia. heavy grade having embossed as ISI Bd.V.5 Page One One Running 1446 253
and Sanitary Mark galvanised iron pipes of 10.15 Kilogram/metre necessary fitting remaking Number 551 Metre
Fitting good the demolished portion with filling trenches and with primer of anti-corrosive oil
paint , 2 coats complete. Including removing existing pipe line if necessary and conveying
and stacking the same in PWD chowky or as directed etc. complete.
1487 Water Supply 43.16 BDV 5 Providing and laying in trenches 100 mm dia. heavy grade having embossed as ISI Bd.V.5 Page One One Running 1846 278
and Sanitary Mark galvanised iron pipes of 14.74 Kilogram/metre necessary fitting remaking Number 551 Metre
Fitting good the demolished portion with filling trenches and with primer of anti-corrosive oil
paint , 2 coats complete. Including removing existing pipe line if necessary and conveying
and stacking the same in PWD chowky or as directed etc. complete.
1488 Water Supply 43.17 BDV 23 Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, Specfications One Number 528 313
and Sanitary connecting piece of UPVC pipe up to the outside face of wall ,making the good
Fitting damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex.
Engr. is necessary before use)
1489 Water Supply 43.18 BDV 24 Providing and fixing 15 cm rigid PVC Nahani trap including PVC Specfications One Number 571 313
and Sanitary grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making
Fitting the good damaged surface and testing etc. complete ( Prior approval of sample and brand
by Ex. Engr. is necessary before use)
Page 288
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1490 Water Supply 43.19 BDV 21 Providing and fixing European type white glazed earthenware water closet pan with Specfications One Number 11596 2120
and Sanitary UPVC seat and lid with chromium plated brass hinges and rubber buffers including
Fitting UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing
cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe
with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I.
chain and pulley,with water Jet and fitting including cutting and making good to the
walls and floors testing etc. complete.(prior approval of sample and brand by Ex.
Engineer is necessary before use)
1491 Water Supply 43.20 BDV 21 Providing and fixing European type white glazed earthenware water closet pan with Specfications One Number 10768 2120
and Sanitary UPVC seat and lid with chromium plated brass hinges and rubber buffers including
Fitting UPVC and vent pipe up to the outside face of wall without flushing cistern with flush
cock and with water Jet and necessary fittings including cutting and making good to the
walls and floors testing etc. complete.( prior approval of sample and brand by Ex.
Engineer is necessary before use)
1492 Water Supply 43.21 BDV 22 Providing and fixing European type Colour glazed earthenware water closet pan with Specfications One Number 11577 2120
and Sanitary UPVC seat and lid with chromium plated brass hinges and rubber buffers including
Fitting UPVC and vent pipe up to the outside face of wall 10 liter enameled low level flushing
cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe
with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I.
chain and pulley,with water Jet and fitting including cutting and making good to the
walls and floors testing etc. complete.( prior approval of sample and brand by Ex.
Engineer is necessary before use)
1493 Water Supply 43.22 BDV 23 Providing and fixing European type Colour glazed earthenware water closet pan with Specfications One Number 10749 2120
and Sanitary UPVC seat and lid with chromium plated brass hinges and rubber buffers including
Fitting UPVC and vent pipe up to the outside face of wall without flushing cistern with flush
cock and with water Jet and necessary fittings including cutting and making good to the
walls and floors testing etc. complete.( prior approval of sample and brand by Ex.
Engineer is necessary before use)
1494 Water Supply 43.23 BDV 20 Providing and fixing Anglo Indian type white glazed earthenware water closet pan with Specfications One Number 6498 2120
and Sanitary trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers
Fitting including UPVC and vent pipe up to the outside face of wall with flushing cistern and
necessary fittings including cutting and making good to the walls and floors testing
etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before
use)
Page 289
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1495 Water Supply 43.24 BDV 22 Providing and fixing high level 10 liter capacity with fittings inlet PVC pipe with stop Specfications One Number 1271 313
and Sanitary tap ,brackets for fixing the cistern,32 mm dia. PVC flush pipe with fitting and clamps 20
Fitting mm dia. PVC overflow pipe with mosquito proof couplings, galvanised iron chain and
pulley painting if ordered to cistern pipe etc. and cutting and making good the damaged
wall and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is
necessary before use)
1496 Water Supply 43.25 BDV 23 Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter Specfications One Number 169 78
and Sanitary cowl dome confirming to I.S.-4985 including making joints with solvent cement etc.
Fitting complete
1497 Water Supply 43.26 BDV 23 Providing and fixing Glass self 125 mm wide and 600 mm long with necessary Specfications One Number 423 164
and Sanitary chromium plated brackets providing T.W.gutties etc. complete
Fitting
1498 Water Supply 43.27 BDV 23 Providing , constructing and fixing 250 mm dia. Inspection chamber made up of Specfications One Number 4085 618
and Sanitary UPVC material of thickness 3.5 mm and height of 259 mm with inlet and outlet of 110
Fitting mm dia. with 75 mm dia. U Trap, Ultra shaft pipe of Upvc material having height of 470
mm and fixing Ultra 250 mm dia. UPVC cover and frame in 150 mm thick in c.c.1:2:4,
having crushed sand bed of 100 mm thick of size 550 mm dia. Including
excavation and refilling the sides of chamber by crushed sand cushioning 150 mm
thickness, connecting all required UPVC fittings with rubber lubricant etc. complete.
1499 Water Supply 43.28 Bd-V Providing , constructing and fixing 450 mm dia. Inspection chamber made As Directected By One Number 10170 773
and Sanitary up of Polypropylene / polyethylene material of thickness 3.5 mm and height of 388 mm Engineer Incharge
Fitting with 160 or 200 mm main inlet (s) outlet and 110 and / or 160 mm branch inlets, with 450
mm dia. Ultra shaft pipe of HDPE material having height of 460 mm, having R.C.C. cover
and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick
of size 750 mm dia. Including excavation and refilling the sides of chamber by sand
crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber
lubricant etc. complete.
1500 Water Supply 43.29 Bd-V Providing , constructing and fixing 600 mm dia. Inspection chamber made As Directected By One Number 19915 773
and Sanitary up of Polypropylene / polyethylene material Having 315 mm diameter Engineer Incharge
Fitting inlet(s)/outlets and with eccentric reducers as per requirement to connect 160 mm and
200 mm pipes having thickness of 5 mm and 600 mm in height, with inbuilt shaft
achieve the invert depth as per site condition of wall thickness of 5 mm having R.C.C.
cover and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm
thick of size 750 mm dia. Including excavation and refilling the sides of chamber by ?sand
crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber
lubricant etc.complete.
Page 290
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1501 Water Supply 43.30 Bd-V Providing , laying and fixing ,jointing Eco- drain 110 mm SN 8 Nu- Drain Upvc pipes or As Directected By One Running 327 47
and Sanitary of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with Engineer Incharge Metre
Fitting fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary
excavation, trench refilling with selective excavated material etc. complete.
1502 Water Supply 43.31 Bd-V Providing , laying and fixing ,jointing Eco- drain 160 mm SN 4 Nu- Drain Upvc pipes or As Directected By One Running 508 47
and Sanitary of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with Engineer Incharge Metre
Fitting fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including
necessary excavation, trench refilling with selective excavated materialetc. complete.
1503 Water Supply 43.32 Bd-V Providing , laying and fixing ,jointing Eco- drain 200 mm SN 4 Nu- Drain Upvc pipes or As Directected By One Running 933 47
and Sanitary of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with Engineer Incharge Metre
Fitting fittings such a bends, tees tees, coupler etc, jointing with rubber lubricant including
necessary excavation, trench refilling with selective excavated materialetc. complete.
1504 Water Supply 43.33 Bd-V Providing , Laying and fixing, jointing Eco Drain 250 mm SN-04 Nu-Drain Upvc pipe or As Directected By One Running 1795 78
and Sanitary of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 & Engineer Incharge Metre
Fitting 16098 with fittings such a bends, tees, coupler, etc. jointing with rubber lubricant,
including necessary excavation, trench refilling with selective excavated material etc.
complete.
1505 Water Supply 43.34 Bd-V Providing , Laying and fixing, jointing Eco Drain 315 mm SN-04 Nu-Drain Upvc pipe or As Directected By One Running 2698 109
and Sanitary of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 & Engineer Incharge Metre
Fitting 16098 with fittings such a bends, tees, coupler, etc. jointing with rubber lubricant,
including necessary excavation, trench refilling with selective excavated material etc.
complete.
1506 Water Supply 43.35 BDV Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super bib As Directected By One Number 442 119
and Sanitary tap with flange including all accessories etc complete Engineer
Fitting Incharge
1507 Water Supply 43.36 BDV Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super As Directected One Number 716 119
and Sanitary Two Way bib tap with flange and extender including all accessories etc complete By Engineer
Fitting Incharge
1508 Water Supply 43.37 BDV Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super As Directected By One Number 468 119
and Sanitary push button type cock / tap with flange including all accessories etc complete Engineer
Fitting Incharge
1509 Water Supply 43.38 BDV Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super wall As Directected One Number 1015 119
and Sanitary sink type tap with flange including all accessories etc complete By Engineer
Fitting Incharge
Page 291
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1510 Water Supply 43.39 BDV Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super jet As Directected One Number 770 119
and Sanitary spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete By Engineer
Fitting Incharge
1511 Water Supply 43.40 BDV Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super As Directected By One Number 468 119
and Sanitary right angle stop tap with flange including all accessories etc complete Engineer
Fitting Incharge
1512 Water Supply 43.41 BDV Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super Pillar As Directected By One Number 636 119
and Sanitary tap with flange including all accessories etc complete Engineer Incharge
Fitting
1513 Water Supply 43.42 BDV Providing and fixing ISI 1729/2002 grade 75 mm dia Cast Iron Waste Water Pipe with As Directected By One Running 1736 524
and Sanitary lugs necessary fittings such as bends, tees, single junction, double junction, slotted vent, Engineer Incharge Metre
Fitting offsets on wall or into the ground including filling joints with cement mortar 1:2
proportion fixing on wall by means by galvanised Mild Steel bracket of 30 x 5 mm plate
and 8 mm square rod with Galvanised Iron clamp with washer as per design drawing and
as directed to keep pipe 50 mm away from wall including necessary scaffolding and
painting the exposed faces with one coat of red lead oil paint and two coats of gray oil
paint including removing the existing pipe if necessary and conveying and stacking in
PWD Chowky or as directed by Engineer-in-Charge.
1514 Water Supply 43.43 BDV Providing and fixing ISI 1729/2002 grade 100 mm dia Cast Iron Soil Pipes With As Directected By One Running 2059 524
and Sanitary lugs including plug bend necessary fittings such as bends, tees, single junction, double Engineer Incharge Metre
Fitting junction, slotted vent, offsets on wall or into the ground including filling joints with
cement mortar 1:2 proportion fixing on wall by means of galvanised Mild Steel bracket of
30 x 5 mm plate and 8 mm square rod with Galvanised Iron clamp with washer as
per design, drawing and as directed to keep pipe 50 mm away from wall including
necessary scaffolding and painting the exposed faces with one coat of red lead oil paint
and two coats of white oil paint including removing the existing pipe if necessary and
conveying and stacking in PWD Chowky or as directed by Engineer-in-Charge.
1515 Water Supply 43.44 BDV Providing and fixing Wall Mounted European type white glazed earthenware water closet As Directected By One Number 13692 1711
and Sanitary pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers Engineer Incharge
Fitting including UPVC and vent pipe up to the outside face of wall 10 liter enameled low level
flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia.
UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe
,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including
cutting and making good to the walls and floors testing etc. complete.( prior approval
of sample and brand by Ex. Engineer is necessary before use)
Page 292
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Page 293
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1525 Building 44.10 BDW 6 Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm Bd.W.6 Page One One Square 3190 503
Miscellaneous with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including Number585 Metre
Item hinges, pivot block locking arrangement, welding riveting and oil painting of three coats
of approved shade Weight of gate 35 Kilogram/Smt.
1526 Building 44.11 BDW 7 Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, Bd.W.7 Page One One Number 7644 2312
Miscellaneous figures including painting the lefters/figures with approved colour and shade complete Number586
Item
1527 Building 44.12 BDW 7 Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. Height letter, Bd.W.7 Page One One Number 8627 2312
Miscellaneous figures including painting the lefters/figures with approved colour and shade complete Number586
Item
1528 Building 44.13 BDW Providing and erecting 1.2 meter high wire fencing with five rows of barbed wire Bd.W.3 Page One Running Meter 838 227
Miscellaneous supported on mild steel angle ( 50 x 50x 6mm) post at 2.5 m c/c including Number583
Item excavation of pits of foundation concrete fixing the posts in ( 1:4:8) cement concrete
block of 45x45x45 cm and fastening the Wires and painting the angles with one coat with
red lead primer and two coats of oil painting etc.complete
1529 Building 44.14 BDW Providing and fixing rain tattis with bamboos and karve grass with 75 mm thick grass As direected by One Square 124 61
Miscellaneous and removing the same after rain is over (size of bamboos 50 mm to 75mm dia and 3 M to Engineer in Metre
Item 3.5 M long) charge.
1530 Building 44.15 BDW Providing and fixing grass chhapper (roof) with necessary bamboos and karve As direected by One Square 152 64
Miscellaneous frame with 75mm. thick grass etc.removing the same after rain is over (size of bamboos Engineer in charge. Metre
Item 50mm to 75mm dia and 3 M to 3.5M long)
1531 Building 44.16 BDW Providing and fixing grass chhapper (roof) with necessary bamboos and karve As direected by One Square 168 80
Miscellaneous frame with 75mm. thick grass etc.removing the same after rain is over (size of bamboos Engineer in Metre
Item 25mm dia and 3 M to 3.5 M long) charge.
1532 Building 44.17 BDW Providing and fixing Bamboo Matting screen for partition with bamboo sticks As direected by One Square 235 149
Miscellaneous Engineer in Metre
Item charge.
Page 294
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1533 Building 44.18 BDW Providing and fixing lioghtening conductor system comprising of erecting Air- BDW 1 Page 581 One Number 25784 5621
Miscellaneous Termination consisting of tubular copper rod of 25mm dia. 1.2 mm thick with multiple
Item points head 1.2 mt. long ( Heavy Duty) welded or clamped to G.I. pipe pole B
grade 50 mm diaof requiired length with M.S. round bnase plate 25 Cm diam and
10mm thick at bottom embeded in cement concrete 1:3:6 dfoundation of size 45 cm
diam x 45 cm Height and providing earthing with copper earth plate of size 60 x 60
x 0.3 cms with cadmium plated nut bolts to fix earthing strip burried in specially
prepared earth pits 1.5 metre below ground level with 40Kilogramcharcoal and salt
with altemate layers of charcoal and salt and G.I.pipe 40mm dia 2 meter length burried in
earthe upto earthling plate remining portion above ground level for watering and refilling
comcpete Note- Copper strip fropm lightening conductor is not considered in this
item.
1534 Building 44.19 BDW Providing and fixing copper strip 25mm wide and 3mm thick for lightening BdW 1 Page 581 as One Running 793 305
Miscellaneous conductor including fixing with screws required scaffolding etc.complete Note- directed Engineer in Meter
Item Lightening conductor and earthinf pits is not considered in this item Charge
1535 Building 44.20 BDW Providing and fixing in position alluminium strips of size 50mm x 3mm for nosing the As direected by One Running 300 194
Miscellaneous steps including fixing with screws and raval plugs, bending and cutting to the required Engineer in charge. Meter
Item shape and size, finishing with paint, necessary mortar bedding of 1:3 cement mortar to get
exact line and level including watering and curing etc.complete
1536 Building 44.21 BDW Providing and fixing crimped with G.I. mesh and size 20 mm x 20mm 10 guage to iron As direected by One Square 769 370
Miscellaneous angle frame including welding crimp mesh to angle frame and steel flat, fixing the Engineer in charge. Metre
Item frame in its original position and oil painting etc.complete ( excluding cost of structural
steel)
1537 Building 44.23 BDW Providig and fixing wleded mesh fabric for guniting of mesh size 75 mm x 75mm As direected by One Square 1064 346
Miscellaneous and 10 guage thick including scaffolding etc.complete Engineer in Metre
Item charge.
1538 Building 44.24 BDW Providing and fixing welded mesh fabric for guniting of mesh size 150mm x 150mm and As direected by One Square 1005 346
Miscellaneous 10 guage i.e. 3.25mm thick including scaffolding etc.complete Engineer in Metre
Item charge.
Page 295
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Page 296
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1556 Building 46.18 BDW 8 Removing teak wood trellies work with frame including stacking the materials as As directed by One Square 33 33
Maintenance directed with all leads, lifts etc. complete. Engineer in Metre
charge.
1557 Building 46.19 BDW 8 Removing cement tiles, or marble or polished shahabad floor or dado without bed As directed by One Square 45 45
Maintenance concrete including stacking the materials as directed with all leads, lifts etc. complete Engineer in Metre
charge.
1558 Building 46.21 BDW 8 Dismantling wooden floor including beams and joists, stacking the materials as directed As directed by One Square 37 37
Maintenance with all leads, lifts etc. complete. Engineer in Metre
charge.
1559 Building 46.23 BDW 8 Removing mud plaster including disposing of the spoils as directed with all leads, lifts As directed by One Square 15 15
Maintenance etc, complete. Engineer in charge. Metre
1560 Building 46.24 BDW 8 Removing wire fencing with wooden post and stacking the material with all leads, lifts As directed by One Running 50 50
Maintenance etc. complete. Engineer in Metre
charge.
1561 Building 46.25 BDW 8 Removing wire fencing with iron/ C.C. fencing post and stacking the materials as As directed by One Running 67 67
Maintenance directed with all leads, lifts etc. complete. Engineer in charge. Metre
1562 Building 46.26 BDW 8 Removing iron pipe raling having wooden R.C.C. or C.C. or iron post and As directed by One Running 69 69
Maintenance stacking the materials as directed etc. complete. Engineer in charge. Metre
1563 Building 46.27 BDW 8 Removing earthen, stonewate pipe and stacking them as directed with all leads, As directed by One Running 22 22
Maintenance lifts etc. complete. Engineer in Metre
charge.
1564 Building 46.28 BDW 8 Removing cast iron or wrought iron or A.C. pipe and stacking them as directed with all As directed by One Running 22 22
Maintenance leads, lifts etc. complete. Engineer in charge. Metre
1565 Building 46.29 BDW 8 Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as As directed by One Cubic Metre 1451 1451
Maintenance directed and stacking them within the specified lead as directed etc. complete. Engineer in charge.
1566 Building 46.30 BDW 8 Removing Np-2 and Np-3 class pipes including stacking at road side as directed As directed by One Running 236 99
Maintenance by the Engineer in charge. Upto 900mm dia. etc complete. Engineer in Metre
charge.
1567 Building 46.31 BDW 8 Removing Np-2 and Np-3 class pipes including stacking at road side as directed As directed by One Running 310 174
Maintenance by the Engineer in charge. Upto 900mm dia and above. etc complete. Engineer in charge. Metre
1568 Building 46.32 BDW 8 Removing single country tiled roof with battens and stacking the materials as directed As directed by One Square 71 71
Maintenance with all leads and lifts etc. complete. Engineer in Metre
charge.
1569 Building 46.33 BDW 8 Removing battens from roof and stacking them as directed with all leads and lifts As directed by One Running 9 9
Maintenance etc. complete. Engineer in charge. Metre
1570 Building 46.34 BDW 8 Removing matting from roof and stacking as directed with all leads and lifts etc. As directed by One Square 20 20
Maintenance complete. Engineer in Metre
charge.
Page 297
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1571 Building 46.35 BDW 8 Removing purlins from roof including stacking as directed with all leads , lifts etc. As directed by One Running 21 21
Maintenance complete. Engineer in Metre
charge.
1572 Building 46.36 BDW 8 Removing rafters from roof including the materials as directed with all leads , lifts As directed by One Running 21 21
Maintenance etc. complete. Engineer in Metre
charge.
1573 Building 46.37 BDW 8 Removing cloth partition with frame work and stacking the materials as directed As directed by One Square 18 18
Maintenance with all leads , lifts etc. complete. Engineer in charge. Metre
1574 Building 46.38 BDW Providing and fixing Jute Kantan (Tarat) screen to the scaffold-ing for external guniting As directed by One Square 68 19
Maintenance as directed including removing the same after the work is over etc. complete. Engineer in Metre
charge.
1575 Building 46.39 BDW Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x As directed by One Running 2539 329
Maintenance 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 Engineer in charge. Metre
x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of
1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast
including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal
M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm
and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at
every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm
including 3 coats of oil painting etc. complete.
1576 Building 46.40 BDW Removing urinal pans or wash hand basins with frame including disconnecting the As directed by One Number 96 96
Maintenance sanitary and water supply connections, removing the same carefully and stacking Engineer in charge.
the serviceable materials as and where directed including throwing the unserviceable
materials outside etc complete
1577 Building 46.41 BDW Removing W.C. pans including disconnecting the sanitary and water supply As directed by One Number 207 207
Maintenance connections, removing and breaking flooring and bed con-crete around pan removing the Engineer in charge.
same carefully and stacking the serviceable materials as adn where directed
including throwing the unserviceable materiasls out side etc. carefully and throwing
out the refusal outside etc. complete.
Page 298
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1578 Building 46.42 BDW Providing and fixing double scaffolding system (cup lock type) on the exterior side As directed by One Square 279 279
Maintenance of building/structure, including additional rows of scaffolding in stepped manner as Engineer in charge. Metre
per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre
to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S.
tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc.
and maintaining it in a serviceable condition for execution of work of cleaning and/
or pointing and/ or applying chemical and removing it thereafter. The scaffolding
system shall be stiffened with bracings, runners, connecting with the building etc,
wherever required, if feasible, for inspection of work at required locations with
essential safety features for the workmen etc., complete as per directions and approval
of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be
measured for payment purpose. (2) The payment will be made once only for execution of
all items for such works.
1579 Building 46.43 BDW Removing Manglore tiled roof and ridge tiles with battens, ridge and barge boards, eaves As directed by One Square 115 115
Maintenance 8 A boards etc and sacking the materials as directed with all leads and lifts complete. Engineer in charge. Metre
Including removing wood work below etc. complete.
1580 Building 46.44 BDW Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire Bd.W.3 Page One One Running 838 227
Maintenance supported on M.S. Angles (50 mm x 50 mm x 6 mm) at 2.5 metres centre to centre Number583 Meter
including excavating pits for foundation, fixing posts in cement concrete of size 45 x 45 x
45 cm, fastening the wire and painting the M.S. Angles with one coat of red lead primer
and two coats of painting etc. complete.
1581 Building 46.45 BDW Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire Bd.W.4 Page One One Running 796 227
Maintenance supported on wooden post of specified size at 2.5 M C/C including excavating pits Number583 Meter
for foundation, fixing post in cement concrete 1:4:8 block of concrete of size 45 x 45 x
45 cm fastening the wire and coal tarring wooden post in two coats etc. complete.
1582 Building 46.46 BDW Replacement of damaged alluminium Butt Hinges of 125 mm of approved quality and As directed by One Number 295 98
Maintenance make to door shutter including removing existing the same in original position Engineer in charge.
making proper adjustment for smooth operation etc. complete as per sample approved by
Engineer incharge.
1583 Building 46.47 BDW Replacement of damaged Mortise Lock of approved quality and make to door As directed by One Number 1236 123
Maintenance shutter including Removing and Refixing with Necessary screw, making proper Engineer in charge.
adjustment for smooth operation etc. complete as per sample approved by Engineer in-
chareg.
Page 299
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1584 Building 46.48 BDW Replacement of damaged Aldrop 300 mm Chromium plated of approved quality and make As directed by One Number 375 51
Maintenance to door shutter including removing existing the same in original position making Engineer in charge.
proper adjustment for smooth operation etc. complete as per sample approved by
Engineer in-charge.
1585 Building 46.49 BDW Replacement of damaged Aldrop 300 mm Iron Oxidised of approved quality and As directed by One Number 322 51
Maintenance make to door shutter including removing existing the same in original position Engineer in charge.
making proper adjustment for smooth operation etc. complete as per sample approved by
Engineer in-charge.
1586 Building 46.50 BDW Replacement of damaged Tower Bolt 300 mm Chromium plated of approved As directed by One Number 190 26
Maintenance quality and make to door/window shutter including removing existing the same in Engineer in charge.
original position making proper adjustment for smooth operation etc. complete as
per sample approved by Engineer in-charge.
1587 Building 46.51 BDW Replacement of damaged Alluminium Handle 125 mm of approved quality and As directed by One Number 178 51
Maintenance make to door/window shutter including removing existing the same in original position Engineer in charge.
making proper adjustment for smooth operation etc. complete as per sample approved by
Engineer in-charge.
1588 Building 46.52 BDW Replacement of damaged Lock of approved quality and make to cupboard and As directed by One Number 247 26
Maintenance doorwer including Removing and Refixing with necessary screw, making proper Engineer in charge.
adjustment for smooth operation etc. complete as per sample approved by Engineer in-
charge.
1589 Building 46.53 BDW Removing chockes and leakages from down take G.I/CI/PVC pipe line on walls floor As directed by One Number 313 313
Maintenance level by using zoola / scaffolding and rectify the same for functioning with all lifts etc. Engineer in charge.
complete.
1590 Building 46.54 BDW Manualy clearing the chockes from under ground drainage line including Inspection As directed by One Running 49 49
Maintenance chambers with the help of required tools for propre functioning line chamber to chamber Engineer in charge. Metre
etc. complete.
1591 Building 46.55 BDW Manualy clearing by removeing the chockes from Nahni Trap, Gully Trap, Wash basin As directed by One Number 186 186
Maintenance unit, Sink and WC with the help of required tools for proper functioning the same etc. Engineer in charge.
complete.
1592 Building 46.56 BDW Filling tiles joint portion of flooring and dado filling with white cement by removing As directed by One Square 239 195
Maintenance existing loose morter/ cement slurry from joint with tools and finish with washing Engineer in charge. Metre
cleaning and curing etc. complete.
1593 Building 46.57 BDW Providing and fixing 6 mm thick commercial plywood with jungle wood frame work of 50 As directed by One Square 1048 217
Maintenance x 35 mm size at 60 cm on both ways for closing the window portion/openings for Engineer in charge. Metre
protection from falling debris, dust etc. including cutting, fixing with nails and removing
after the same after completion of the work. (To be used after approval of Superintending
Engineer)
Page 300
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1594 Building 46.58 BDW Removal of plants / ficus grown by pulling out root system embedded in masnory, As directed by One Number 228 82
Maintenance cutting stem and application of high/gur/lime formulation as specified by the Engineer in charge.
Architect or other patented chemical biocide treatment such as biocide 'Glycel'
(iso proplamine salt of glyphosate) or other chemical as specified by the Engineer in
charge etc. complete.
1595 Building 46.59 BDW Lowering down the debris obtained from breaking and removing the cement plaster / As directed by One Cubic Metre 752 752
Maintenance burnt brick masonry of the first floor by any means without causing dust nuisance and Engineer in charge.
damage to structure, stacking the same as and where directed including cleaning the site
complete.
Page 301
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1597 Structural 47.02 BDSS Providing and grouting the holes by Poly Ceramic Cementitious i.e NicGrout G 06 + As directed by One Kilogram 80 31
Strengthening 53 grade cement material of as per requirement to reduce the porosity of concrete / Engineer in charge.
Masonry structure and to increase the strength of structure using grouting pipes , grouting
m/c, mixer etc and all relevant safety with all leads and lifts, material, machinery, labour,
etc. Complete as per specification and as directed by Engineer-in-Charge.
1603 Structural 47.03 BDSS Providing and applying high abrasive resistant, UV resistant,impermeable ,self As directed by One Square 1527 187
Strengthening curing,high strength, non shrink, Poly Ironite Ceramic Cementatious (PICC) repair Engineer in charge. Metre
mortar for water proofing on concrete surface with thickness up to 5 mm, , apply
bond coat Kelox Water Misible epoxy before PICC application (using
manual/mechanical means) and Providing and Applying PCC up to 50 mm
thickness for desire slope to drain the water and kept ponded for continuous period
of 3 days to detect any seepage / leakage/ dampness if any, the surface then shall be
cleared, complete as per specification including cost of all materials, machinery,
labour, insurance charges as directed by the Engineer in charge.
Page 302
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1604 Structural 47.04 BDSS PICC Coating for concrete Bridge repair work :-Providing and applying Poly Ironite As directed by One Square 5165 1326
Strengthening Ceramic Cementitious (PICC) material of Self curing ,High Abrasion resistant , Engineer in charge. Metre
Non shrink ,High strength,UV resistant, repair mortar coating on bond coat Kelox water
missable epoxy of on concrete surface upto 10 mm thickness including Cleaning the
concrete surface of bridge by grinding the surface by grinder machine with wire brush
/diamond wheel, removing existing loose particles etc. by using grinder, wire
brush,breaker machine, water jet(using other mechanical / manual means) also
removing of algae fungi by special chemical of clonon etc.complete with all leads
and lifts, Material, Machinery, Labour, Scaffolding etc. complete as per specification and
as directed by engineer-in-charge.
1605 Structural 47.05 BDSS Removal of Vegitation/Plants:- Removal of entire root inside the bridge portion. Remains As directed by One Square 1511 633
Strengthening of the root shall be treated with special chemical Steripure MBT 20. Top 50 mm shall Engineer in charge. Metre
filled with high strength grout including cost of all material, machinery, labour,
scaffolding, etc.as per specification and as directed by Engineer-in-Charge.
1606 Structural 47.06 BDSS Providing & Applying DuraClean- WR for cleaning the TMT bars, steel structure As directed by One Square 1469 83
Strengthening etc. of structure by Waterjet cleaning/ grinding the surface by grinder machine, wire Engineer in charge. Metre
brush, removing existing corrosion from the metal surface also removing loose
particles(using other mechanical / manual means) and apply on prepared surface of
DuraGuard - as corrosion preventive coat on prepared TMT bars, steel
structure,metal surface etc. to protect it from corrosion etc. as per manufacturer's
specification ( using other manual / mechinical means) complete as per specification
including cost of all materials, machinery, labour, insurance charges as directed by
the Engineer in charge.
1607 Structural 47.07 BDSS PICC filling for Honey combing area at concrete surface:-Providing and applying As directed by One Square 5509 1656
Strengthening Poly Ironite Ceramic Cementitious (PICC) material of Self cureing ,High Abrasion Engineer in charge. Metre
resistant , Non shrink ,High strength,UV resistant, repair mortar coating on Kelox water
missble epoxy of concrete surface fill the honey combing area etc. on tacky primer coat
upto 10 mm thickness or as per the surface conditions including Cleaning the concrete
surface of bridge by grinding the surface by grinder machine with wire brush
/diamond wheel, removing existing loose particles etc. by using grinder, wire
brush,breaker machine, water jet(using other mechanical / manual means) also removing
of algae fungi by special chemical of clonon. etc.complete with all leads and lifts,
Material, Machinery, Labour, Scaffolding etc. complete as per specification and as
directed by engineer-in-charge.
Page 303
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1608 Structural 47.08 BDSS Providing and applying Poly Ironite Ceramic Cementitious (PICC) of self curing, a As directed by One Square 5284 397
Strengthening high abrasion resistant, non-shrink, high strength,low porosity, UV resistant repair Engineer in charge. Metre
mortar on Concrete road etc including cleaning the Concrete surface on concrete
road by breaking, cleaning with wire brush , removing existing loose particles etc. by
using wire brush,breaker machine, air (using other mechanical / manual means) then
applying Kelox ( water missible epoxy)of , bond coat on prepared concrete surface for
bonding the old surface to new repair mortar etc. as per manufacturer's specification (
using other manual / mechinical means) then apply repair mortar of PICC to fill the
concrete surface upto 15 mm coat etc.complete with all leads and lifts, Material,
Machinery, Labour etc. complete as per specification and as directed by engineer-in-
charge.
1609 Structural 47.09 BDSS Providing and applying Poly Ironite Ceramic Cementitious (PICC) of self curing, a As directed by One Square 7317 397
Strengthening high abrasion resistant, non-shrink, high strength,low porosity, UV resistant repair Engineer in charge. Metre
mortar on Concrete road etc including cleaning the Concrete surface on concrete
road by breaking, cleaning with wire brush , removing existing loose particles etc. by
using wire brush,breaker machine, air (using other mechanical / manual means) then
applying Kelox ( water missible epoxy)of , bond coat on prepared concrete surface for
bonding the old surface to new repair mortar etc. as per manufacturer's specification (
using other manual / mechinical means) then apply repair mortar of PICC to fill the
concrete surface upto 25 mm coat etc.complete with all leads and lifts, Material,
Machinery, Labour etc. complete as per specification and as directed by engineer-in-
charge.
1610 Structural 47.10 BDSS Providing and applying Poly Ironite Ceramic Cementitious (PICC) of self curing, a As directed by One Square 3043 108
Strengthening high abrasion resistant, non-shrink,high strength, low porosity, UV resistant coating Engineer in charge. Metre
mortar on existing GSB of 100 mm thickness , get levelled the surface and cure
then applying self curing coating PICC mortar for 50 mm thickness after stamp the
surface by special concrete stamping mold as per specified texture and colour
etc.complete with all leads and lifts, Material, Machinery, Labour etc. complete as per
specification and as directed by engineer-in- charge.
Page 304
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1611 Masonry Bridge 47.11 BDSS Masonry Bridge repair work:-Providing pointing on masonry surface of Bridge with As directed by One Square 5871 1690
Repair UV resistance, Non-shrink. high strength, high abrasion, material like Poly Ironite Engineer in charge. Metre
Ceramic Cementitious (PICC) self curing cementitious material for masonry joint filling
to depth of 20mm including pointing work of masonry by removing of existing loose
portion of stone masonry by braking removing existing loose particles upto required
depth 50 mm or as per site confition cleaning with special chemicals clonon and
water jet under pressure for removing algae, fungi, applying bond coat Kelox water
missable epoxy before repair material application complete as per specification
including cost of all material, machinery, labour,scaffolding, transportation etc.
with all leads and lifts as directed by the engineer-in- charge.
1612 Structural 47.12 BDSS Providing & Applying DuraClean- WR - for cleaning the TMT bars, steel structure etc. As directed by One Square 519 23
Strengthening of structure by Waterjet cleaning/ grinding the surface by grinder machine, wire brush, Engineer in charge. Metre
removing existing corrosion from the metal surface also removing loose
particles(using other mechanical / manual means) and apply on prepared surface of
DuraCap 2 coats corrosion preventive coat on prepared TMT bars, steel
structure,metal surface etc. to protect it from corrosion etc. as per manufacturer's
specification ( using other manual / mechinical means) complete as per specification
including cost of all materials, machinery, labour, insurance charges as directed by
the Engineer in charge.
1613 Bitumen and 47.13 BDSS Providing and applying Poly Ironite Ceramic Cementitious (PICC) of self curing, a As directed by One Kilogram. 57 4
concrete road Pot high abrasion resistant, non-shrink, high strength,low porosity, UV resistant repair mortar Engineer in charge.
Hole Reparing to fill the pot holes on Concrete/Bitumen road including cleaning the pot holes on
concrete/Bitumen road by breaking, clean with wire brush , Air blower, removing
existing loose particles etc. by using wire brush,breaker machine, air jet(using other
mechanical / manual means) then applying Kelox water missiable epoxy bond coat on
prepared concrete/Bitumen surface pot hole for bonding the old surface to new repair
mortar etc. as per manufacturer's specification ( using other manual / mechinical means)
then apply repair mortar to fill the pot holes on concrete/Bitumen surface upto 75 mm
depth to match existing road thickness etc. Complete with all leads and lifts, Material,
Machinery, Labour etc. complete as per specification and as directed by engineer-in-
charge.
Page 305
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1614 Bitumen and 47.14 BDSS Providing and applying Poly Ironite Ceramic Cementitious (PICC) of self curing, a As directed by One Kilogram. 150 4
concrete road Pot high abrasion resistant, non-shrink, high strength,low porosity, UV resistant repair mortar Engineer in charge.
Hole Reparing to fill the pot holes on Concrete/Bitumen road including cleaning the pot holes on
concrete/Bitumen road by breaking, clean with wire brush , Air blower, removing
existing loose particles etc. by using wire brush,breaker machine, air jet(using other
mechanical / manual means) then applying Kelox water missiable epoxy bond coat on
prepared concrete/Bitumen surface pot hole for bonding the old surface to new repair
mortar etc. as per manufacturer's specification ( using other manual / mechinical means)
then apply fast seting repair mortar to fill the pot holes on concrete/Bitumen surface
upto 75 mm depth to match existing road thickness etc. & movement the vechical
within 1 hour. complete with all leads and lifts, Material, Machinery, Labour etc.
complete as per specification and as directed by engineer-in-charge.
1615 Structural 47.15 BDSS Providing and applying 30 mm thick self curing Ceremic Polymer Microconcrete As directed by One Square 2429 208
Strengthening of approved make having Compressive strength above M30, non shrink, impermeable , Engineer in charge. Metre
filling mortar to load carrying R.C.C member in two layers on cleaned concrete surface ,
including honey comb area (using manual/mechanical means). Mixing mortar of Nicosil
C80 and fresh 53 grade cement with required water cement ratio for desired consistency
and applying and finishing by manual trawelling , curing after curing initial
setting time etc, as per manufacturers specification etc. complete as per specification
and as directed by engineer-in- charge. Work shall be executed by certified applicator only
and work shall be guaranteed for 5 years and guarantee shall be provided on Rs. 500 /-
stamp paper. (Bond coat mentioned below is to be done before coating)
1616 Structural 47.16 BDSS Providing and applying Kelox R 101 (Resin) + Kelox H 404 (Hardner) water misible As directed by One Square 727 79
Strengthening epoxy of approved make for bonding old concrete to new moratr after mixing slowely in Engineer in charge. Metre
predefined ratio and applying by brush on the surface, when it is tacky then apply the
moratr complete as per specification and as directed by engineer-in-charge. Work shall be
executed by certified applicator only and work shall be guaranteed for 5 years and
guarantee shall be provided on Rs. 500 /- stamp paper
Page 306
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1617 Structural 47.17 BDSS Corrosion protection of unexposed old reinforcement on non-spalled concrete by Insertion As directed by One Square 1295 236
Strengthening of sustained release Corrosion inhibiting caplets like Powrthrow which protect both Engineer in charge Metre
anodic & cathodic sites and reduces Corrosion potential Ecorr by minimum 80 mV in
conductive medium, by drilling 20-22 mm dia holes into the concrete at a depth of 30-40
mm and inserts to be filled by epoxy sealant EPCO-1010. Caplets shall inhibit corrosion
inhibition efficiency of 98% (when added 0.03 % by weight) against control sample
evaluated by Tafel polarization method. Depth of penetration for effective corrosion
protection shall be 120mm & film formation of 20 Microns as evaluated by CSIR-CECRI
Karaikudi.Spacing of Powrthrow shall be-
a) For RCC Columns- 1 Units in a single drilled hole at a spacing of 1m c/c from two
opposite faces in staggered fashion
b) For RCC Beams- 1 Units in a single drilled hole at a spacing of 1m c/c from two
opposite faces in staggered fashion
C) RCC Slab- 4 Units in a single drilled hole in 1 sqm area in a grid pattern
1618 Structural 47.18 BDSS Providing protection of unexposed old reinforcement on non spalled concrete by insertion As directed by One Number 352 88
Strengthening of sustained release corrosion inhibitor caplets like POWRTHROW sustained release Engineer in charge
Corrosion inhibiting caplets of to protect both anodic & cathodic sites and shall reduce to
reduce corrosion potential Ecorr by minimum 80 mV in conductive medium, by drilling
20 mm holes into the concrete at a depth of 25 mm and inserts to be filles by EPCO-PC-
Putty. Caplets shall inhibit corrosion inhibition efficiency of 98% (when added 0.03% by
weight) against control sample evaluated by Tafel polarization method. Depth of
penetration for effective corrosion protection shall be 120 mm and film formation of 20
Microns as evaluated by CSIR-CECRI Karaikudi.
1619 Structural 47.19 BDSS Providing and applying Elastomeric, Anti carbonation, Anti corrosive, UV resistant, As directed by One Square 522 160
Strengthening Solvent based Pure Aliphatic Acrylate System- MONOPOL 456 on the exterior faces of Engineer in charge Metre
Buildings Protection against ION penetration, carbonation,UV radiations and wethering
effect conforming to ASTM D 4541-02 having Electrochemical impedance of 107 Ω and
achieving dry film thickness of minimum 200 microns in a primer coat followed by two
top coats using brush or spray after complete cleaning & removal of oil, grease or loose
particles from the surface etc. complete.
Page 307
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1621 Masonary 48.02 As directed by Providing and constructing non load bearing wall with 150mm Horizontally perforated As directed by One Square 1760 736
Engineer in charge clay hollow blocks of approved make with compressive strength not less than Engineer in charge Metre
35Kilogram/Sqcm, U value of 47.0 W/m2k, Water Absorption of 15%, with cement
mortar 1:6 with blocks of size 400mm x 150mm x 200mm (12.5 bricks per Sq.m
excluding mortar joint thickness) including cost of materials, labour charges,
scaffolding, curing at all heights, complete as per specifications & directions of Engineer-
in Charge. Cost shall be inclusive of filling the Blocks with Cement mortar at exposed
junctions and filling with concrete using 12mm down size aggregates at Window and
door Jambs for fixing hold fast, anchors etc.
1622 Masonary 48.03 As directed by Providing and constructing non load bearing wall with 100mm Horizontally perforated As directed by One Square 1465 483
Engineer in charge clay hollow blocks of approved make with compressive strength not less than Engineer in charge Metre
35Kilogram/Sq.cm, U value of 47.0 W/m2k, Water Absorption of 15%, with cement
mortar 1:6 with blocks of size 400mm x 100mm x 200mm (12.5 bricks per Square
Metre. excluding mortar joint thickness) At every 5th course level, Concrete band of
100mm thick with 1:3:6 Mix Concrete along with Nominal Reinforcement to be
provided. The rate inclusive of cost of materials, labour charges, scaffolding, curing at
all height, complete as per specifications & directions of Engineer-in Charge. Cost shall
be inclusive of filling the Blocks with Cement mortar at exposed junctions and
filling with concrete using 12mm down size aggregates at Window and door Jambs for
fixing hold fast, anchors etc.
Page 308
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1623 Flooring 48.04 As directed by Providing and laying 18 mm thick ADONI BROWN LEATHER FINISH stone for As directed by One Square 4590 961
Engineer in charge flooring, machine cut in required size, approved shade, color and texture laid using white Engineer in charge Metre
cement slurry over 20 mm (average) thick base of cement mortar 1:4 followed by laying,
fixing and jointed with white cement slurry mixed with matching pigment, including
rubbing and curing moulding and polishing to edge to give high gloss finish etc
complete. The application rate for tile adhesives shall be as per manufacturer's
recommendations. as per detail drawing. The rate shall be inclusive of all labour, material,
wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels and as
directed by Engineer in charge. Complete. a) Flooring
1624 Flooring 48.05 As directed by Providing and laying 18 mm thick ADONI BROWN LEATHER FINISH stone for As directed by One Square 5644 1010
Engineer in charge flooring, machine cut in required size, approved shade, color and texture laid using white Engineer in charge Metre
cement slurry over 20 mm (average) thick base of cement mortar 1:4 followed by laying,
fixing and jointed with white cement slurry mixed with matching pigment, including
rubbing and curing moulding and polishing to edge to give high gloss finish etc
complete. The application rate for tile adhesives shall be as per manufacturer's
recommendations. as per detail drawing. The rate shall be inclusive of all labour, material,
wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels and as
directed by Engineer in charge. Complete. a) Skirting
1625 Flooring 48.06 As directed by Providing and Laying factory made coloured chamfered edge Cement concrete grass As directed by One Square 1171 99
Engineer in charge paver blocks of required strength,thickness & size/shape, made by table vibratory method Engineer in charge Metre
using PU mould, laid in required colour & pattern over 50mm thick compacted bed
of fine fine aggregate (natural sand/crushed sand VSI grade finely washed etc.),
compacting and proper embedding/laying of inter locking paver blocks into the fine
aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through
vibratory compaction by using plate vibrator, filling the joints with fine aggregate
(natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver
blocks as per required size and pattern, finishing and sweeping extra fine aggregate
(natural sand/crushed sand VSI grade finely washed etc.) and complete as per
manufacturer spsecifications & direction of Engineer-in-Charge. 60mm thick CC paver
block of M-35 grade concrete with approved colour and design & pattern.
Page 309
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1626 Flooring 48.07 As directed by Bamboowood 14 mm thick tile flooring including quater round, door reduces and As directed by One Square 7354 239
Engineer in charge plywood- Providing & fixing in position Phenol bonded Epitome Bamboowood flooring Engineer in charge Metre
with planks of sizes 14mm thick, 1800mm length (minimum) and 130mm wide
(minimum), in approved colour, texture and finish, having Performance Appraisal
Certificate (PAC) issued by Building Materials & Technology Promotion Council
(MBTPC). The flooring shall be fixed with tongue and groove interlocaking system, with
plywood of mr grade of 18mm thickness as base and underlayment of 4mm thick
expanded poly ethylene foam sheets having density 40Kilogram/cum, over prepared
surface with necessary quarter round planks of size 1900mm x 18mm and dorr reducer
of size 1900mm x 44mm, wherever required. The Epitome Bamboowood planks
shall have minimum density of 1000 Kilogram/cum & minimum Hardness 1000
Kilogramf. with Eco friendly UV coating, all complete as per direction of Engineer
in-charge.
1627 Flooring 48.08 As directed by Bamboowood 14mm thick Tile Flooring including quarter round & door reducer - As directed by One Square 5675 239
Engineer in charge Providing & fixing in position Phenol bonded Epitome Bamboowood flooring with Engineer in charge Metre
planks of sizes 14mm thick, 1800mm length (minimum) and 130mm wide (minimum),
in approved colour, texture and finish, having Performance Appraisal Certificate
(PAC) issued by Building materials & Technology Promotion Council (BMTPC).
The flooring shall be fixed with tongue and groove interlocaking system, with 2mm
underlay as sound abrobing and moisture barrier and underlayment of 4mm thick
expanded poly ethylene foam sheets having density 40Kilogram/cum, over prepared
surface with necessary quarter round planks of size 1900mm x 18mm and dorr reducer
of size 1900mm x 44mm, wherever required. The Epitome Bamboowood planks
shall have minimum density of 1000 Kilogram/cum & minimum Hardness 1000
Kilogramf. with Eco friendly UV coating, all complete as per direction of Engineer
in-charge
1628 Flooring 48.09 As directed by Bamboowood 14mm thick wall Skirting - Providing & fixing in position Phenol As directed by One Square 6322 1000
Engineer in charge bonded Epitome Bamboowood in wall skirting with planks of sizes 14mm thick, Engineer in charge Metre
1900mm length (minimum) and 85mm wide (minimum), in approved colour, texture
and finish, having Performance Appraisal Certificate (PAC) issued by Building
materials & Technology Promotion Council (BMTPC). The skirting shall be fixed
SS screws & rawl plugs, over underlayment of 4mm thick expanded poly
ethylene foam sheets having density 40Kilogram/cum, over prepared surface. The
Epitome Bamboowood planks shall have minimum density 1000 Kilogram/cum &
minimum Hardness 1000 Kilogramf. with Eco friendly UV coating, all complete as per
direction of Engineer in-charge
Page 310
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1629 Flooring 48.10 As directed by Bamboowood 20mm thick Decking Outdoor Flooring Tile Providing & fixing in As directed by One Square 10574 376
Engineer in charge position Phenol bonded Epitome Bamboowood deck flooring tiles with planks of sizes Engineer in charge Metre
20mm thick, 1900 mm length and 135mm wide ,in approved colour , texture and
finish , having performance Appraisal Certificate (PAC) issued by Building
Materials& Technology promotion Council (BMTPC)with necessary profiled edges and
groove fixed with 40mm ss screws 3 nos in each tile to frame work made of second class
seasoned and treated teak wood of size 38x38 mm placed underneath acoss the tile at both
ends and in centre fixed with clips holding in position. The Epitome Bamboowood planks
shall have minimum density of 1000 Kilogram/cum & minimum hardness 1000
Kilogramf.all complete as per direction of engineer in-charge.
1630 Colouring 48.11 As directed by Providing and applying 2 coats of 100% Pure acrylic low VOC and APEO & HCHO As directed by One Square 308 107
Engineer in charge free water based paint of approved colour that belongs to class 1 flame spread Engineer in charge Metre
resistance of approved make Paint should provide durable and long lasting silk finish
with a high crack tolerance of upto 1mm. Paint should have an oustanding washability
with high resistance to wide range of bacteria and fungus. Paint has to be applied on
smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty.
This surface should be primed with water based low VOC Primer. The work activity
should cover all aspects of applying paints from surface preparation as directed by
Engineer in charge.
1631 Colouring 48.12 As directed by Providing and applying 2 Coats of 100% Pure acrylic water based paint with As directed by One Square 200 64
Engineer in charge special heat reflectance property to withstand the harsh climate for period of atleast 10 Engineer in charge Metre
years of approved make. Paint system should provide durable and long lasting finish
with DFT of min 90 microns and should protect against concrete carbonation with R
value of minimum 600 and equivalent concrete layer thickness value of min 150 cm.
Paint should have breathability property and should be able to cover hairline cracks in
the surface upto 0.5mm The paint has to be applied on a coat of high quality acrylic
copolymer based alkali resistant primer with excellent penetrating properties including
cleaning, with all leads and lifts at all levels etc complete, as directed by Engineer in
charge.
Page 311
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1632 Colouring 48.13 As directed by Providing and applying 2 Coats of high quality acrylic copolymer matt approved As directed by One Square 142 54
Engineer in charge low VOC emulsion paint of approved shadethat gives smooth, flat and washable and Engineer in charge Metre
durable finishing of approved make. Paint should have good flow levelling property with
good colour retention and incan antibacterial property. Paint has to be applied on
smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty.
This surface should be primed with water based low VOC acrylic copolymer based primer
sealer that has incan antibacterial property. The work activity should cover all aspects
of applying paints from surface preparation, filling to erecting and dismantling of
scaffolding, finishing the surface etc as directed by Engineer in charge.
1633 Colouring 48.14 As directed by Providing and applying 2 Coats of 100% Pure acrylic low VOC water based paint with As directed by One Square 178 64
Engineer in charge to withstand for period of atleast 5 years of approved make. Paint should provide durable Engineer in charge Metre
long lasting silk finish with high resistance to UV and resistance to spreading of
flame. Paint should protect against concrete carbonation with R value of minimum 600
and ability to built cracks upto min 0.7mm. The paint has to be applied on High
quality water based acrylic copolymer primer with good alkali resistance properties.
With all leads and lifts at all levels etc. complete, as directed by Engineer in charge.
1634 Colouring 48.15 As directed by Providing and applying impression 24 carrat Luxury paint of approved make & As directed by One Square 200 64
Engineer in charge approved brand Emulsion paint to interior walls and ceilings of approved quality, colour Engineer in charge Metre
and shade to new surface in two coats, including sub surface prparation by Acrylic
putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete
(Low VOC).
1635 Colouring 48.16 As directed by Providing and applying antipeel paint of approved make & approved brand As directed by One Square 200 64
Engineer in charge exterior Emulsion paint of approved quality, colour and shade to old and new surface in Engineer in charge Metre
two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc.
complete (Heat
Reflective Paint).
1636 Colouring 48.17 As directed by Providing and applying top coat exterior paint to terrace of approved make, As directed by One Square 87 64
Engineer in charge shade and quality and one coat of primer before applying textured paint including Engineer in charge Metre
scaffolding if necessary preparing surface by throughly cleaning of oil, grease, dirt and
other material and fine aggregate (natural sand/crushed sand VSI grade finely washed etc.)
preparing as required, etc. complete.
Page 312
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1637 Roofing 48.19 As directed by Providing and applying two coats of High Albedo paint having minimum Solar As directed by One Square 410 78
Engineer in charge Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per Engineer in charge Metre
ASTM) C 1549 and ASTM C 1371 respectively, VOC less than 10 cc/gm. The
coating thickness and the methodology of application shall strctly as per manufacturer's
specifitions and as approved by engineer in charge. Surface preparation includes cleaning
with metal wire brush to remove all dust, fungus etc, washing with water all complete.The
contractor shall give guarantee for the performance of SRI and also the durabitity of
coating, all complete as per direction of Engineer - in- incharge.
1638 Doors & 48.20 As directed by Bamboowood paneling or paneling and glazing in paneled and glazed shutters for doors of As directed by One Square 3603 670
Windows Engineer in charge 25 to 40mm thick. Providing & fixing in position Phenol bonded Bamboowood Engineer in charge Metre
paneling of 10mm thick, in 25 to 40 mm thick paneled or paneled and glazed shutters for
doors, windows, clerestorey windows in approved colous, texture & finishi. The bamboo
wood planks shall have minimum density of 1000 Kilogram/cum & minimum Hardness
1000 Kilogramf. The panels shall have profiled interlocking system locked in place with
bamboo pins, all complete as per direction of the Entgineer inchargeand (Area of
opening for panel inserts excluding portion inside grooves or rebates)
1639 Doors & 48.21 As directed by Bamboowood paneled or paneled and glazed Shutters of Doors Providing of fixing, As directed by One Square 5392 226
Windows Engineer in charge in position Phenol bonded Bamboowood panelled or paneled and glazed shutters Engineer in charge Metre
for doors, windows, clerestorey windows with pre-molded 30mm thick planks, in
approved colous, texture & finish. It shall have 10mm wide, 25mm deep grove
to fit inpanels. The bamboowood shall have minimum density of 1000 Kilogram/cum,
minimum Hardness 1000 Kilogramf. All styles and rails shall have profiled
interlocking system locked in place by bamboo pins, all complete as per direction of
Engineer in-charge (The paneling will be paid for separately)
1640 Doors & 48.22 As directed by Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having As directed by One Square 9462 0
Windows Engineer in charge multi- chambered outer frame section (73 x 50)mm with an outer wall thickness of Engineer in charge Metre
2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel
reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement
designed to give optimum strength, 5 mm thick toughened double glass with 12 mm
spacer of good quality including alluminium track, Inter-locking profile, coextruded
beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings
(couplings, hinges) including with all required screws and nuts with all necessary
U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge
etc. complete.
Page 313
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1641 Doors & 48.23 As directed by Sliding Window- 3 Track (2 Glass shutter + 1 flymesh) of approved make with As directed by One Square 16061 984
Windows Engineer in charge DGU, providing and fixing of Sliding Window- 3 Track (2 Glass shutter + 1 flymesh ). Engineer in charge Metre
For details refer to Specifications. As directed by Engineer in charge.
1642 Doors & 48.24 As directed by Providing & fixing of Casement fixed window of approved make with DGU. The As directed by One Square 17018 984
Windows Engineer in charge extruded aluminium sections of Alloy 6063 tolerances confirming to DIN standard from Engineer in charge Metre
approved raw material V2 / V4 as directed by Engineer in charge.
1643 Plumbing 48.25 As directed by Providing and fixing sink cock with regular swinging spout (Wall / floor Mounted As directed by One Number 3043 238
Engineer in Model) with wall flange having flow rate up to 6.0 Litr/Minute of Jaquar/Cera/Hindware Engineer in
charge /Perryware or equivalent make incluidng other necessary fitting, etc. complete as directed charge
by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got
approved from the Engineer In Charge.)
1647 Plumbing 48.31 As directed by Providing and fixing white glazed urinal with Pressmatic auto closing valve having flow As directed by One Number 10391 1028
Engineer in charge rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make with Engineer in charge
P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in
charge.( Make shall conform to manufacturer's Green product and shall got approved from
the Engineer In Charge.)
Page 314
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1648 Plumbing 48.32 As directed by Providing and fixing wall hung white wash basin of size 550 x 400 x 195 mm with pillar As directed by One Number 6055 1564
Engineer in charge cock having flow rate up to 6.0 Litr/Minute,C.P.Angular stop cock long thread of Engineer in charge
Jaquar/Cera/Hindware /Perryware or equivalent make, including SS bottal trap of
approved make etc complete as directed by Engineer in charge.( Make shall conform to
manufacturer's Green product and shall got approved from the Engineer In Charge.)
1649 Plumbing 48.33 As directed by Providing and fixing divertor with overhead shower,shower arm,spout,hand shower with As directed by One Number 14866 1095
Engineer in charge wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware Engineer in charge
or equivalent make including all necessary pipes,fittings etc.complete as directed by
Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got
approved from the Engineer In Charge.)
1650 Plumbing 48.34 As directed by Providing and fixing wall mixer with overhead shower,shower arm,hand shower with wall As directed by One Number 5485 321
Engineer in bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or Engineer in
charge equivalent make including all necessary pipes,fittings etc.complete as directed by charge
Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got
approved from the Engineer In Charge.)
1651 Plumbing 48.35 As directed by Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195mm As directed by One Number 19889 1564
Engineer in charge size with pillar cock, C.P.Angular stop cock, long thread of approved make Engineer in charge
continental including SS bottle trap of necessary pipe connection up to the outside
face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed
on Black Kadappa Framework, etc. Complete as directed by Engineer in charge.
1652 Plumbing 48.36 As directed by Providing and fixing Table top white wash basin of size 120x635x405mm rubber plugs As directed by One Number 24356 1564
Engineer in charge and brass chain, with pillar cock, C.P.Angular stop cock long thread, continental Engineer in charge
including S.S. bottle trap of approved make having necessary pipe connection up to
theoutside face of the wall.etc complete as directed by Engineer in charge.
1653 Plumbing 48.37 As directed by Providing and fixing white Opal series European type wall-hung, of size As directed by One Number 23429 624
Engineer in charge 400 mm x 370 mm x 575mm with approved make flush valve including soil pipe, vent Engineer in charge
pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings, cutting &
making good walls, floors etc as directed by Engineer in charge.
1654 Plumbing 48.38 As directed by Providing and fixing Orissa Pan of size 580x445x260 mm with approved make flush As directed by One Number 7234 1564
Engineer in charge valve including trap, C.I. soil and vent pipe upto outside face of wall including 100mm Engineer in charge
dia. C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer
in charge.
Page 315
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1655 Plumbing 48.39 As directed by Providing and fixing C.P. a 2-Way BIB cock with wall flange of approved make As directed by One Number 2364 223
Engineer in charge including necessary sockets/ union nut etc. complete as directed by Engineer in charge. Engineer in charge
1656 Plumbing 48.40 As directed by Providing and fixing white wash basin with half pedestal of size As directed by One Number 11081 1935
Engineer in charge 515mmX615mmX460mm including pillar cock auto-closing system CP angular stop cock Engineer in charge
long thread of approved make continental including S.S. bottle trap of necessary pipe
connection upto the outside face of the wall.
1657 Plumbing 48.41 As directed by Providing and fixing white european type wall-hung pan, of size 350mm x 355mm x As directed by One Number 30447 1990
Engineer in charge 570 mm concealed flush tank with floor-mounting frame installing kit and drain pipe Engineer in charge
connection set for wall hung WC, with approved make square control plates including soil
pipe, vent pipe upto the outside face of wall, 100mm dia C.I. plug bend inlet pipe
all fittings,cutting & making good walls, floors etc. complete.
1658 Plumbing 48.42 As directed by Providing and fixing Orissa type white glazed earthenware water closet pan of size As directed by One Number 3358 1651
Engineer in charge 260mm x 440mm x 580mm with approved make Slim wall hung cistern with installation Engineer in charge
kit including S or P trap with cast iron soil and vent pipe upto outside face of the wall
1:2:4 brick bat lime concrete bedding without flushing tank and its accessories
etc.complete.
1659 Plumbing 48.43 As directed by Providing and fixing white glazed urinal of size 710x460x300mm with As directed by One Number 18575 1564
Engineer in charge sensotronic concealed type flushing valve for urinal with complete kit having fittings, inlet Engineer in charge
pipe with stop tap, brackets for fixing the cistern, 32mm diameter P.V.C. flush pipe with
fitting and flushing arrangement including lead soil pipe, lead trap & soil pipe connection
upto the outside face of wall etc complete.
1660 Plumbing 48.44 As directed by Providing and fixing of approved make white aquafree Waterless Urinal of with cartride As directed by One Number 18037 659
Engineer in size of 31.5x33x60cm including other necessary fittings etc. complete. Engineer in
charge charge
1661 Plumbing 48.45 As directed by Providing and fixing wall-hung white wash basin of size 470x575x190mm of As directed by One Number 18013 625
Engineer in charge approved make half pedestal, pillar cock, C.P.Angular stop cock, long thread continental Engineer in charge
including S.S. bottle trap of having necessary pipe connections up to the outside
face of the wall.etc complete.
Page 316
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1662 Rain water 48.46 As directed by RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth As directed by One Number 51500 14047
harvesting Engineer in charge percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling Engineer in charge
around outside of RCC rings (annular space) with 40mm size boulders including filling of
percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels
followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed
river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.)
including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand
VSI grade finely washed etc.) media layer including covering with RCC slab,
manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet
pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of
all labour, material, wastage, scaffolding, transportation, taxes, including all leads,
lifts at all levels. All material should be of approved make. All works complete as
per the drawing, technical specification and direction of the Engineer in charge
1663 Rain water 48.47 As directed by RWH - Recharge Pit As directed by One Number 91300 18098
harvesting Engineer in charge Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC Engineer in charge
rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including
installation of combination of solid/perforated PVC casing pipe wrapped around with
netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular
space) with 40mm size boulders including filling of recharge pit up to 0.5m depth
with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10-
25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural
sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each
gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media
layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end-
caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling
as shown in the drawing.The rate shall be inclusive of all labour, material, wastage,
scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should
be of approved make. All works complete as per the drawing, technical
specification and direction of the Engineer in charge.
1664 Rain water 48.48 As directed by Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitable As directed by One Running 416 91
harvesting Engineer in charge method prescribed in IS: 2800 (part I), including collecting samples from different strata, Engineer in charge Metre
preparing and submitting strata chart/ bore log, including hire & running charges of
all equipments, tools, plants & machinery required for the job, all complete as per
direction of Engineer in charge, upto 90m depth below ground level.
Page 317
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1665 Rain water 48.49 As directed by Supplying, assembling, lowering and fixing in vertical position in bore well, As directed by One Running 494 18
harvesting Engineer in charge unplasticized PVC medium well-casing pipe of 150mm dia, conforming to IS:12818, Engineer in charge Metre
including required hire and labour charges, fittings & accessories etc. all complete,
for all depths, as per the direction of Engineer in charge.
1666 Rain water 48.50 As directed by Supplying, assembling, lowering and fixing in vertical position in bore well, As directed by One Number 339 7
harvesting Engineer in charge unplasticized PVC medium well screen pipes with ribs of 100mm dia, conforming to Engineer in charge
IS:12818, including required hire and labour charges, fittings & accessories etc. all
complete, for all depths, as per the direction of Engineer in charge.
1667 Rain water 48.51 As directed by Supplying, filling, spreading & leveling stone boulders of size range 5cm to 20cm in As directed by One Cubic Metre 1309 186
harvesting Engineer in recharge pit, in the required thickness, for all leads & lifts, all complete as per the Engineer in
charge direction of Engineer- in-charge. charge
1668 Rain water 48.52 As directed by Supplying, filling, spreading & leveling gravels of size range 5mm to 10mm, in the As directed by One Cubic Metre 1457 186
harvesting Engineer in charge recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, Engineer in charge
all complete as per direction of Engineer-incharge.
1669 Rain water 48.53 As directed by Supplying, filling, spreading & leveling coarse fine aggregate (crushed sand VSI grade As directed by One Cubic Metre 1457 186
harvesting Engineer in charge finely washed etc.) of size range 1.5mm to 2mm in recharge pit, in required thickness over Engineer in charge
gravel layer, for all leads & lifts, all complete as per direction of Engineer in charge.
1670 Rain water 48.54 As directed by Gravel packing in tubewell construction in accordance with IS:4097, including As directed by One Cubic Metre 1494 223
harvesting Engineer in charge providing gravel: fine/ medium/ coarse, in required grading & sizes as per the actual Engineer in charge
requirement, all complete as per direction of Engineer in charge.
1671 Others 48.55 As directed by Providing and Fixing Sun Louvre panels roll formed, 0.6mm thick, pre-painted As directed by One Square 7091 895
Engineer in charge stove enameled aluminium strip of a corrosion resistant alloy, including necessary Engineer in charge Metre
fitting etc. complete, as directed by Engineer in Charge.
1672 Others 48.56 As directed by Providing & fixing heat insulation by wrapping the pipes with glass wool/asbestos fibre As directed by One Running 220 41
Engineer in rope or tape/videoflex 32 mm as directed by Engineer in charge. Engineer in Metre
charge charge
1673 Others 48.57 As directed by Providing & fixing heat insulation by wrapping the pipes with glass wool/asbestos fibre As directed by One Running 169 38
Engineer in charge rope or tape/videoflex 25 mm as directed by Engineer in charge. Engineer in charge Metre
1674 Others 48.58 As directed by Providing & fixing heat insulation by wrapping the pipes with glass wool/asbestos fibre As directed by One Running 136 35
Engineer in charge rope or tape/videoflex 15 mm as directed by Engineer in charge. Engineer in charge Metre
Page 318
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1675 Others 48.59 As directed by Cool Mortar - Providing & fixing 40mm thick Cool Mortar for insulation which has As directed by Square Metre 3222 865
Engineer in charge proportioned blend of white cement, well-graded fine aggregate (natural sand/crushed Engineer in charge
sand VSI grade finely washed etc.) and selected assortment of fine metal and mineral
stabilizers to provide a heat barrier including filling joints, curing and cleaning complete.
The rate shall be inclusive of all labour, material, scaffolding, transportation, taxes,
including all leads, lifts at all levels and shall be as directed by Engineer in charge.
1676 Others 48.60 As directed by Bamboowood 10mm thick Wall Cladding including Threshold & T-mold - Providing & As directed by One Square 6917 1222
Engineer in charge fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of Engineer in charge Metre
sizes 10mm thick, 1900mm length (minimum) and 135mm wide approved colour, texture
and finish, having Performance Appraisal Certificate (PAC) issued by Building materials
& Technology Promotion Council (BMTPC). with necessary profiled edges fixed with
BR nails to frame work made of second class teak wood of size 50 x 50mm in centre and
ends of each tile. The bamboowood cladding shall be laid over teak wood frame and hold
in place by 50mm thick teak wood placed in centre of two teak wood and backlayment
and covered with 1.00mm thick expanded poly ethylene foam of density 25Kilogram/cum
in two layers first layer on wall surface before fixing wooden frame and second layer on
frame under cladding. The Bamboowood planks shall have minimum density of 1000
Kilogram/cum & minimum Hardness 1000 Kilogramf. with Eco friendly UV coating, all
complete as per direction of Engineer in-charge.
1677 Others 48.61 As directed by Bamboowood 10mm thick Wall Cladding including Threshold & T-mold for Accoustic As directed by One Square 6495 300
Engineer in charge purpose Providing & fixing in position Phenol bonded Bamboowood wall cladding at all Engineer in charge Metre
height with planks of sizes 10mm thick, 1900mm length (minimum) and 135mm wide
approved colour, texture and finish, having Performance Appraisal Certificate (PAC)
issued by Building Materials & Technology Promotion Council (BMTPC) with necessary
profiled edges fixed with BR nails to frame work made of second class teak wood of size
50 x 50 mm in centre and ends of each tile. The bamboowood cladding shall be laid over
glass wool of 50mm thickness filled in between two teak wood frame and hold in place by
50mm thick teak wood placed centre of two teak wood and covered with mesh (rabbit)
fixed to teak woodframe work with wire nails as backlayment and covered with 1.00mm
thick expanded poly ethylene foam of density 25Kilogram/cum in two layers first layer on
wall surface before fixing wooden frame and second layer on frame under cladding. The
Bamboowood planks shall have minimum density of 1000 Kilogram/cum & minimum
Hardness 1000 Kilogramf. with Eco friendly UV coating, all complete as per direction of
Engineer in-charge.
Page 319
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1680 b 50% Sand obtained from excavation + 50% crushed sand One Cubic Metre 1121 179
1681 c crushed sand (upto 5 mm) brought by Contractor One Cubic Metre 1859 262
1682 Coastal 49.03 Rd - 19; Rd - 29; Supplying and laying trap stones upto 20 kilogram for Filter / Core layer including Spec.One Number- One Cubic Metre 894 75
Rd - 27. conveying with all the leads, lifts, laying in required lines, level, slope as per drawing Rd-19, Page-187;
including necessary equipments and machinery as directed by etc. complete in tidal Rd-29, Page-193;
conditions. Rd-27, Page-192.
[Except weight of
stone specified in
wording of
specification]
1683 Coastal 49.04 Rd - 19; Rd - 29; Supplying and laying laterite stones upto 20 kilogram for Filter / Core layer including Spec.One Number- One Cubic Metre 574 75
Rd - 27. conveying with all the leads, lifts, laying in required lines, level, slope as per drawing Rd-19, Page-187;
including necessary equipments and machinery as directed by etc. complete in tidal Rd-29, Page-193;
conditions. Rd-27, Page-192.
[Except weight of
stone specified in
wording of
specification]
Page 320
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1684 Coastal 49.05 Rd - 19; Rd - 29; Supplying and laying trap stone weighing 20 to 50 kilogram for Core / Sub armour layer Spec.One Number- One Cubic Metre 907 75
Rd - 27. including conveying with all the leads, lifts, laying in required lines, level, slope as per Rd-19, Page-187;
drawing including necessary equipments and machinery as directed by etc. complete in Rd-29, Page-193;
tidal conditions. Rd-27, Page-192.
[Except weight of
stone specified in
wording of
specification]
1685 Coastal 49.06 Rd - 19; Rd - 29; Supplying and laying laterite stone weighing 20 to 50 kilogram for Core / Sub armour Spec.One Number- One Cubic Metre 599 75
Rd - 27. layer including conveying with all the leads, lifts, laying in required lines, level, slope as Rd-19, Page-187;
per drawing including necessary equipments and machinery as directed by etc. complete Rd-29, Page-193;
in tidal conditions. Rd-27, Page-192.
[Except weight of
stone specified in
wording of
specification]
1686 Coastal 49.07 Laying of trap / laterite stones by rearrangement of stones displaced from existing as directed by One Cubic Metre 152 75
protection bund weighing upto 50 kilogram for Core / Sub armour layer including Engineer in charge
collection, sorting and relaying in required lines, level, slope as per drawing including
necessary equipments and machinery as directed by etc. complete in tidal conditions.
1687 Coastal 49.08 Rd - 19; Rd - 29; Supplying and laying trap stone weighing 50 to 100 kilogram for Core / Sub armour / Spec.One Number- One Cubic Metre 974 75
Rd - 27. Armour layer including conveying with all the leads, lifts, laying in required lines, level, Rd-19, Page-187;
slope as per drawing including necessary equipments and machinery as directed by etc. Rd-29, Page-193;
complete in tidal conditions. Rd-27, Page-192.
[Except weight of
stone specified in
wording of
specification]
Page 321
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1688 Coastal 49.09 Rd - 19; Rd - 29; Supplying and laying laterite stone weighing 50 to 100 kilogram for Core / Sub armour / Spec.One Number- One Cubic Metre 670 75
Rd - 27. Armour layer including conveying with all the leads, lifts, laying in required lines, level, Rd-19, Page-187;
slope as per drawing including necessary equipments and machinery as directed by etc. Rd-29, Page-193;
complete in tidal conditions. Rd-27, Page-192.
[Except weight of
stone specified in
wording of
specification]
1689 Coastal 49.10 Laying of trap / laterite stones by rearrangement of stones displaced from existing as directed by One Cubic Metre 230 75
protection bund weighing 50 to 100 kilogram for Core / Sub armour / Armour layer Engineer in charge
including collection, sorting and laying in required lines, level, slope as per drawing
including necessary equipments and machinery as directed by etc. complete in tidal
conditions.
1690 Coastal 49.11 Rd - 19; Rd - 29; Providing and laying trap stones weighing 100 to 200 kilogram for Core / Sub armour / Spec.One Number- One Cubic Metre 1206 149
Rd - 27. Armour layer including conveying with all the leads, lifts, laying in required lines, level, Rd-19, Page-187;
slope as per drawing including necessary equipments and machinery as directed by etc. Rd-29, Page-193;
complete in tidal conditions. Rd-27, Page-192.
[Except weight of
stone specified in
wording of
specification]
1691 Coastal 49.12 Laying of trap stones by rearrangement of stones displaced from existing protection bund as directed by One Cubic Metre 460 149
weighing 100 to 200 kilogram Sub armour / Apron / Armour layer including collection, Engineer in charge
sorting and laying in required lines, level, slope as per drawing including necessary
equipments and machinery as directed by etc. complete in tidal conditions.
1692 Coastal 49.13 Rd - 19; Rd - 29; Providing and laying trap stones weighing 200 to 300 kilogram for Apron / Armour layer Spec.One Number- One Cubic Metre 1261 149
Rd - 27. including conveying with all the leads, lifts, laying in required lines, level, slope as per Rd-19, Page-187;
drawing including necessary equipments and machinery as directed by etc. complete in Rd-29, Page-193;
tidal conditions. Rd-27, Page-192.
[Except weight of
stone specified in
wording of
specification]
Page 322
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1693 Coastal 49.14 Laying of trap stones by rearrangement of stones displaced from existing protection bund as directed by One Cubic Metre 522 149
weighing 200 to 300 kilogram for Apron / Armour layer including collection, sorting and Engineer in charge
laying in required lines, level, slope as per drawing including necessary equipments and
machinery as directed by etc. complete in tidal conditions.
1694 Coastal 49.15 Rd - 19; Rd - 29; Providing and laying trap stones weighing 300 to 500 kilogram for Sub armour / Apron / Spec.One Number- One Cubic Metre 1316 149
Rd - 27. Armour layer including conveying with all the leads, lifts, laying in required lines, level, Rd-19, Page-187;
slope as per drawing including necessary equipments and machinery as directed by etc. Rd-29, Page-193;
complete in tidal conditions. Rd-27, Page-192.
[Except weight of
stone specified in
wording of
specification]
1695 Coastal 49.16 Laying of trap stones by rearrangement of stones displaced from existing protection bund as directed by One Cubic Metre 584 149
weighing 300 to 500 kilogram for Sub armour / Apron / Armour layer including Engineer in charge
collection, sorting and laying in required lines, level, slope as per drawing including
necessary equipments and machinery as directed by etc. complete in tidal conditions.
1696 Coastal 49.17 Rd - 19; Rd - 29; Providing and laying trap stones weighing 500 to 1000 kilogram for Apron / Armour layer Spec.One Number- One Cubic Metre 1371 149
Rd - 27. including conveying with all the leads, lifts, laying in required lines, level, slope as per Rd-19, Page-187;
drawing including necessary equipments and machinery as directed by etc. complete in Rd-29, Page-193;
tidal conditions. Rd-27, Page-192.
[Except weight of
stone specified in
wording of
specification]
1697 Coastal 49.18 Laying of trap stones by rearrangement of stones displaced from existing protection bund as directed by One Cubic Metre 646 149
weighing 500 to 1000 kilogram for Apron / Armour layer including collection, sorting and Engineer in charge
laying in required lines, level, slope as per drawing including necessary equipments and
machinery as directed by etc. complete in tidal conditions.
Page 323
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1698 Coastal 49.19 Rd - 19; Rd - 29; Providing and laying trap stones weighing above 1000 kilogram for Apron / Armour layer Spec.One Number- One Cubic Metre 1429 149
Rd - 27. including conveying with all the leads, lifts, laying in required lines, level, slope as per Rd-19, Page-187;
drawing including necessary equipments and machinery as directed by etc. complete in Rd-29, Page-193;
tidal conditions. Rd-27, Page-192.
[Except weight of
stone specified in
wording of
specification]
1699 Coastal 49.20 Laying of trap stones by rearrangement of stones displaced from existing protection bund as directed by One Cubic Metre 708 149
weighing above 1000 kilogram for Apron / Armour layer including collection, sorting and Engineer in charge
laying in required lines, level, slope as per drawing including necessary equipments and
machinery as directed by etc. complete in tidal conditions.
Coastal 49.21 Rd - 19; Rd - 29; Providing & fixing G.I. wire Gabions coated with Zinc+PVC of required size, section Spec.One Number-
Rd - 27. including boxes made of mechanically woven hexagonal shaped wire mesh of type, Rd-19, Page-187;
10x12cm. edges mechanically selvedged made of heavily (Zinc+ PVC) coated G.I. wires Rd-29, Page-193;
as per BS: 443, mesh wire 3.00 mm Ø edge wire 3.9 mm Ø and filled with 20 to 50 Rd-27, Page-192.
kilogram weight trap stones including conveying with all the leads & lifts and placing at [Except weight of
required places in required line, level, slope as per drawing, section as directed etc. stone specified in
complete under tidal conditions. wording of
specification]
1700 a (a) Gabions of size – 1.00 x 1.00 x 1.00 M One Cubic Metre 3153 385
1701 b (b) Gabions of size – 1.50 x 1.00 x 1.00 M One Cubic Metre 2875 359
1702 c (c) Gabions of size – 2.00 x 1.00 x 1.00 M One Cubic Metre 2718 327
1703 d (d) Gabions of size – 3.00 x 1.00 x 1.00 M One Cubic Metre 2533 269
1704 e (e) Gabions of size – 4.00 x 1.00 x 1.00 M One Cubic Metre 2415 202
Page 324
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Coastal 49.22 Rd - 19; Rd - 29; Providing and laying box type flexible gabions of required size and rope of 10 mm Ø Spec.One Number-
Rd - 27. polypropylene material four strand mesh of 150 mm x 150 mm size, filled with hand Rd-19, Page-187;
packed stones of 20 to 50 kilogram in weight; so as to give total mass required with all Rd-29, Page-193;
leads and lifts including fusing top of gabions, tying to each other and laying to required Rd-27, Page-192.
line, level, slope as per drawing, section as directed etc. complete under tidal conditions. [Except weight of
stone specified in
wording of
specification]
1705 a (a) Gabions of size – 1.00 x 1.00 x 1.00 M One Cubic Metre 2681 385
1706 b (b) Gabions of size – 1.50 x 1.00 x 1.00 M One Cubic Metre 2489 359
1707 c (c) Gabions of size – 2.00 x 1.00 x 1.00 M One Cubic Metre 2366 327
1708 d (d) Gabions of size – 3.00 x 1.00 x 1.00 M One Cubic Metre 2225 269
1709 Coastal 49.23 Bd.E.5 Providing and laying precast tetrapods / blocks of plain cement concrete of M-30 grade, Spec. One One Number 9387 1733
weighing 2000 kilogram each of required shape for armour layer including necessary steel NumberBd. E. 5;
formwork/mould including applying form releasing agent including vibration, curing, Page One Number
conveying and placing them in correct profile as per drawing including all labours, 67 / 2012
materials, equipments, machinery such as crane of adequate capacity and boom length,
with all lead and lift etc. complete in tidal conditions.
1710 Coastal 49.24 Bd.E.5 Providing and laying precast tetrapods / blocks of plain cement concrete of M-30 grade, Spec. One One Number 12688 2441
weighing 3000 kilogram each of required shape for armour layer including necessary steel NumberBd. E. 5;
formwork/mould including applying form releasing agent including vibration, curing Page One Number
conveying and placing them in correct profile as per drawing including all labours, 67 / 2012
materials, equipments, machinery such as crane of adequate capacity and boom length,
with all lead and lift etc. complete in tidal conditions.
1711 Coastal 49.25 25 Relaying of precast concrete tetrapods / blocks, weighing upto 4000 kilogram each of As directed by One Number 2577 299
required shape for armour layer including removing from existing protection bund and Engineer -in- Charge
relaying in correct profile as per drawing including all labours, materials, equipments,
machinery such as crane of adequate capacity and boom length, with all lead and lift etc.
complete in tidal conditions.
Page 325
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1712 Coastal 49.26 Bd.E.5 Providing and laying in situ M-20 cement concrete of trap / granite / quartzite / gneiss Spec. One One Cubic Metre 6213 1700
metal with 15% plum of trap stones for foundation and bedding of retaining walls and NumberBd. E. 5;
jetty etc. including necessary formwork, compacting, curing, bailing out water manually in Page One Number
tidal range etc. complete. 67 / 2012
1713 Coastal 49.27 Bd.E.5 Providing and laying in situ M-25 cement concrete of trap / granite / quartzite / gneiss Spec. One One Cubic Metre 6377 1700
metal with 15% plum of trap stones for retaining walls and jetty etc. including necessary NumberBd. E. 5;
formwork, compacting, curing, bailing out water manually in tidal range etc. complete. Page One Number
67 / 2012
1714 Coastal 49.28 28 Providing and fixing stainless steel bollard of steel pipe 1.00 metre long of 250 mm inner As directed by One Number 20873 1494
diameter and circular top plate of 350 mm diameter with 5 mm thickness on deck of jetty Engineer -in- Charge
in cement concrete including necessary fixtures and fastening etc. complete. (Stainless
steel of grade S-304)
1715 Coastal 49.29 29 Providing and fixing stainless steel mooring ring in cement concrete on deck of jetty As directed by One Number 9830 299
consist of 32 mm thick steel bar, 225 mm inner diameter, steel ring with 75 mm inner Engineer -in- Charge
diameter steel hook of 32 mm diametre as per approved drawing etc. complete. (Stainless
steel of grade S-304)
1716 Coastal 49.30 30 Providing and fixing fenders made from used tyres including fixing by stainless steel As directed by One Number 2466 953
chain links of 8mm dia. and anchor bolts of 16 mm diameter etc. complete as per drawing Engineer -in- Charge
and as directed under tidal range.
1717 Coastal 49.31 31 Supplying and laying 100% PP Staple fibre Non woven Geobags filled with locally As directed by One Number 309 49
available sand (inital Lead of 50m) having minimum mass of 400 GSM and Tensile Engineer -in- Charge
strength of 22/24 KN/M in MD/CD and elongation of 60/60 %. The specified Geotextile
(Bags) shall have puncture resistance of 4100 N and abrasion resistance of greater than
75% of strength & thickness, to be laid as per drawing in required line, level, slope as per
drawing, section in tidal condition as directed by Engineer - in - Charge. (Size of Bag 1.00
x 0.70m with inflated thickness of 10cm at Centre weight of each filled bag shall be in
between 130 to 150 kilogram)
1718 Coastal 49.32 32 Supplying and laying 100% PP Staple fibre Non woven Geo bags filled with locally As directed by One Number 1753 185
available sand (inital Lead of 50m) having minimum mass of 400 GSM and Tensile Engineer -in- Charge
strength of 22/24 KN/M in MD/CD and elongation of 60/60 %. The specified Geotextile
(Bags) shall have puncture resistance of 4100 N and abrasion resistance of greater than
75% of strength & thickness, to be laid as per drawing in required line, level, slope as per
drawing, section in tidal condition as directed by Engineer - in - Charge. (Size of Bag 2.00
x 1.50m with inflated thickness of 40cm at Centre weight of each filled bag shall be in
between 550 to 600 kilogram)
Page 326
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Coastal 49.33 33 Providing laying and placing in position segment of a/b diameter UV Resistance
Geotextile tubes as per design and drawing of High strength woven Geotextile made from
polypropylene multifilament woven in both warf and weft directions, with cover of UV
protective pp tape woven Geotextile with pore size less than 0.075 millimetre and
permeability greater than 9.00 litre/ One Square Metre/second conforming specification
IS:1969 and ASTM standards placed parallel to high water line and duly filled with sea
sand mechanically by sand dredging machine so as to act as main burnt and toe burm at
offshore to hold accumulated sand on beach including all labour, plant, equipment and
machinery required including shuttering and scaffolding as directed by Engineer-in-
Charge of the work etc. complete.
1719 a (a) Geotextile tubes of diametre – 3.00 M As directed by One Running 13882 533
Engineer -in- Charge Metre
1720 b (b) Geotextile tubes of diametre – 1.50 M As directed by One Running 6637 266
Engineer -in- Charge Metre
1721 Coastal 49.34 34 Removing sub-marine rock below low tide level to the specified section from navigation As directed by One Cubic Metre 1786 150
channel as per the area and depth mentioned on the drawing by mechanicel means with Engineer -in- Charge
poclain, hydraulic excavator, rock breaker etc. and barge for establisment all machinery
with all required tool tools and equipments, boat for conveying excavetd material,
including removing the excavated materials with all lift and leads as directed beyond
high tide level line of water stacking spreading or disposing,dewatering if required unless
otherwise provided alse where complete under tidal condition.
1722 Coastal 49.35 35 Supplying and laying 100% PP Staple fibre Woven Geobags filled with locally available As directed by One Number 1251 49
sand (inital Lead of 50m) having minimum mass of 600 GSM and Tensile strength of 175 Engineer -in- Charge
KN/M2 in MD/CD and elongation of 60/60 %. The specified Geotextile (Bags) shall have
puncture resistance of 4100 N and abrasion resistance of greater than 75% of strength &
thickness, to be laid as per drawing in required line, level, slope as per drawing, section in
tidal condition as directed by Engineer - in - Charge. (Size of Bag 1.00 x 0.70m with
inflated thickness of 10cm at Centre weight of each filled bag shall be in between 130 to
150 kilogram)
Page 327
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1723 Coastal 49.36 36 Supplying and laying 100% PP Staple fibre Woven Geo bags filled with locally available As directed by One Number 3110 185
sand (inital Lead of 50m) having minimum mass of 600 GSM and Tensile strength of 175 Engineer -in- Charge
KN/M2 in MD/CD and elongation of 60/60 %. The specified Geotextile (Bags) shall have
puncture resistance of 4100 N and abrasion resistance of greater than 75% of strength &
thickness, to be laid as per drawing in required line, level, slope as per drawing, section in
tidal condition as directed by Engineer - in - Charge. (Size of Bag 2.00 x 1.50m with
inflated thickness of 40cm at Centre weight of each filled bag shall be in between 550 to
600 kilogram)
1724 Coastal 49.37 37 Removing sand /muck/ slush /soil bellow low tide level to the specified section from As directed by One Cubic Metre 426 219
navigation channel as per the area and depth upto 3.00 m from sea bed by mechanicel Engineer -in- Charge
means with , hyderaulic excavator, etc. and barge for establisment all machinery with all
required tools and equipments, boat for conveying excavetd material, including removing
the excavated materials with all lift and leads as directed beyond high tide level line of
water stacking spreading or disposing,dewatering if required unless otherwise provided
else where complete under tidal condition.
Page 328
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Page 329
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1726 Corrosion 50.07 Providing & Supplying corrosion inhibiting admixture in concrete to protect steel bars for As directed by One Kilogram 210 NA
Inhibiting all concrete in every part Polyalk CP 293 of approved make & approved by Engineer in Engineer in charge
Admixture charge migrating, non-nitrite based corrosion inhibiting admixture shall be added at a dose
of 3 Kilograms per cum of concrete. The admixture should protect both cathodic and
anodic sites and have been accredited by Indian Roads Congress, recommended for use by
Ministry of Road Transport & Highways and should have a 4 year track record of use in
both the Gulf Region and India. Admixture should have evaluated test reports
demonstrating a corrosion rate of zero coulombs after 9 test cycles as per ASTM G 109
when tested from a research institution NBA accredited Grade A and internationally
ranked among top 5 research institutions in the world in Annual Survey conducted by
Georgia Institute of Technology ranking of research institutions. PH of admixture should
be alkaline in nature, specific gravity of 0.99 – 1.1, colour : brownish. The contractor must
intimate the engineer in charge prior to addition in concrete for recording. If the admixture
is put in the concrete mix at the batching plant, a written record of the amount of
admixture used shall be supplied to the engineer. The engineer must ensure that the
specified dosage of admixture is added in the concrete mix. (Material Cost Analysis only)
1727 Waterproofing 50.08 Providing and mixing shrinkage compensating admixture cum plasticizer – Sunplex 330 As directed by One Pouch 42 NA
admixture gms pouch of approved make & approved by Engineer in charge, adding per Engineer in charge
50Kilogrambag of cement in sand faced cement plaster to internal/external surfaces in
finished in proper line and level. Add Sunplex in dry machine mix before addition of
gauging water. (Material Cost Analysis only)
1728 Bonding agent 50.09 Providing and applying one pack bonding coat between concrete members like RCC As directed by One Square 54 33
slabs, columns, beams, chajjas, pardis etc and cement mortar plaster using Hack Aid Plast Engineer in charge Metre
of approved make & approved by Engineer in charge. Clean the concrete surface
thoroughly to remove dust, dirt, grime, deshuttering oils and rub down to a clean surface.
Apply Hack Aid Plast of approved make & approved by Engineer in charge by spray on
the entire concrete surface. Provide a lean cement - sand dash coat over the same. Allow
the dash coat to set for around 24 hours. Further plastering as per specifications can
continue.
Page 330
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1729 Water proofing 50.10 Clean the surface to remove dirt, loose particles. Examine the surface closely for any As directed by One Square 251 163
cracks. Clean the cracks. Provide and fill a pure acrylic, polymer modified ready to use Engineer in charge Metre
paste Polyfill AR of approved make & approved by Engineer in charge having a cream
coloured viscous emulsion ready to use acrylic polymeric non-shrink crackfiller putty with
auto suction properties and requiring no bonding agent, no curing and no requirement for
opening the existing cracks finishing with subsequent filling as required. Provide and
apply three coats of 100% acrylic waterproof heat insulating breathable decorative
external coating Sunext 8 of approved make & approved by Engineer in charge, in the
desired shade. Stir well and apply by brush for three coats. Applying three coats at an
interval of 4-6 hours between each coat.
High Performance 100% Acrylic, Waterproof, Anti-fungal, Anti-carbonation, Heat
Insulating External Paint should have following minimum properties:
1. Specific Gravity: 1.3 ± 0.1 at 25°C
2. pH: 7.0 to 10.00
3. Viscosity: 18 to 30 sec. at 25°C by Ford Cup One Number B-4 (Dilute 2 parts of
product with 1 part of water)
4. CO2 diffusion resistance co- efficient (DIN EN 1062-6 (2002-10): 7.59 x105
5. CO2 diffusion equivalent air layer thickness (DIN EN 1062-6 (2002-10): 127m @ 190
microns DFT
6. Adhesion (ASTM D 4541): 2.3 N/mm2 (Concrete / Substrate Failure)
7. Solar Reflectance Index (ASTM E 1980 11,EN 673:2011, EN 410:2011): 107
It shall be applied as per manufacturers specification.
Door and 50.11 BD-T Providing and fixing factory made door/Window frames of required colour made with As directed by
Windows wood Polymer composite (WPC) extuded internal ribbed sections conforming to Engineer-in-charge
American Society for testing and materials (ASTM) in regard with density, tensile
strength, flexural strength, Izod impact, water absorption and screw withdrawal strength
with wall thickness of 5mm (+/1mm) and with frames having mitred joints at each corner,
joined together by two nos. of 10 x 8 mm & 40 mm long PVC dovetail keys including
hard wood piece support along the full vertical and horizontal length in rebate portion hole
for fixing hinges and fixtures and the frames fixed to Walls/columns with 15 mm long
dash fasteners/holdfasts (dash fasteners/holdfasts to be paid separately) etc. complete as
per the direction of Engineer in charge,with prior approval of concerned Superitending
Engineer.
1730 a 1.1. For Profile size of 75 x 50 mm with 32 x 12 mm rebate One Running 435 74
Metre
1731 b 1.2 For Profile size of 100 x 50 mm with 32 x 12 mm rebate One Running 535 90
Metre
Page 331
Door and BD-T
Windows
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1732 c 1.3 For Profile size of 125 x 50 mm with 38 x 12 mm rebate One Running 635 108
Metre
1733 d 1.4 For Profile size of 120 x 50 mm with 32 x 12 mm double rebate (Window Section) One Running 650 110
Metre
Paving , Florring 50.12 BD-M Supply & Fixing of Rectified Porcelain Stoneware Tiles for Ventilated Facades of As directed by One Square 8694 1478
and dado Specified size as per specification/ site drawings having 6 mm and 9 mm thickness with Engineer-in-charge Metre
factory made Kerfs (grooves) as per need and size 600/1200 and 800/1600. The Rectified
Porcelain Stoneware Tiles shall possess properties having Water absorption < 0.5%
Bending Strength > 40 N/mm2 and are resistant to : UV Light, chemicals, smog, thermal
shocks & bacteria. The facade will be made from Nexion Rectified Porcelain Stoneware
Tiles (Sintered Compact Surfaces) specified as per ISO 13006 : Annex G- EN 14411 :
Annex G : Dry Pressed Ceramic Tiles and all the tests carried out by Italian labs
accredited according to ISO/ IEC 17025 : 2005. The Terramilano Fixing sub structure will
confirm to Norme Tec niche per le Costruzioni NTC/8 (Technical Standard for
construction) guidelines for construction in Italy, Eurocode 0 " Information on the method
of semi-probabilistic limit states and safety factor " Euro coad 1 " Determination and
calculation of actions on structure " Euro 9 " Project aluminum structures " UNI 11018
and ETAG 034 The Substructure will consists of Upright extruded aluminum profile
TruSt80, alloy 6060 T5 thickness equal to 1.5 to 2 mm and dimension 80 x 110 mm, inter
axis 80 cm of Length 3660 mm, 8085 Aluminum box Section of 1 x 3 inch,1x2inch and
1x 5 inch of length 3660 mm and thickness 1.5 to 2 mm as per need. Brackets St80
galvanized steel and aluminum of 80 mm x 60 mm, aluminum L bracket size 1.5 x 1.5
inch and 1 x 2.5 inch thickness 3 mm that allow to anchor the vertical stand to the
Building, 9 mm/6mm S10 Hooks Harmonic Stainless Steel AISI 304 which supports the
weight of the Tiles; Bossong/Hilti Mechanical Fasteners and Nylon Anchor Fastner; and
Structural Sealant of 3M for Ventilated Facade. Packing of Edges and corner with
window seal with ACP of appoved make for water Proofing and alteration. Inclusive of
scaffolding and fixing. The installation method differ according to the structure of
building and design. For EXTERNAL AND INTERNAL CLADDING OF
STRUCTURE. with prior approval of concerned Superitending Engineer.
1734 Paving , Florring 50.13 BD-M Supply & Fixing of Rock / Stone Finished outdoor vitrified flooring Tiles 20 mm thick As directed by One Square 2850 485
and dado and required width wide in plain pattern including Cement float, filling joints, with neat Engineer-in-charge Metre
cement slurry, Natural sand, curing and cleaning complete. with prior approval of
concerned Superitending Engineer.
Page 332
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1735 Paving , Florring 50.14 BD-M Supply & Fixing of Rock / Stone Finished outdoor vitrified flooring Tiles 16 mm thick As directed by One Square 2650 450
and dado and required width wide in plain pattern including Cement float, filling joints, with neat Engineer-in-charge Metre
cement slurry, Natural sand, curing and cleaning complete. with prior approval of
concerned Superitending Engineer.
1736 Paving , Florring 50.15 BD-M Supply & Fixing of Rock / Stone Finished outdoor vitrified flooring Tiles 16 mm thick As directed by One Square 2550 433
and dado and required width wide in plain pattern including Cement float, filling joints, with neat Engineer-in-charge Metre
cement slurry, Natural sand, curing and cleaning complete with prior approval of
concerned Superitending Engineer.
1737 Paving , Florring 50.16 BD-M .Supply & Fixing of Full Body Vitrifid Steptiles Ready to install Treads and Risers 16 mm As directed by One Square 2850 485
and dado thick, required width and required finish in plain pattern including Cement float, filling Engineer-in-charge Metre
joints, with neat cement slurry, Natural sand, curing and cleaning etc complete. with prior
approval of concerned Superitending Engineer.
1738 Paving , Florring 50.17 BD-M Supply & Fixing of Full Body Vitrifid Steptiles Ready to install Treads and Risers 12 mm As directed by One Square 2450 416
and dado thick, required width and required finish in plain pattern including Cement float, filling Engineer-in-charge Metre
joints, with neat cement slurry, Natural sand, curing and cleaning etc complete.
1739 Paving , Florring 50.18 BD-M Supply & Fixing of Rock/ Stone Finished Full Body Vitrifid Steptiles with thick Bullnose As directed by One Square 3150 535
and dado for Ready to install Treads and Risers, 16 mm thick and of required width in plain Engineer-in-charge Metre
pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing
and cleaning complete. with prior approval of concerned Superitending Engineer.
1740 Paving , Florring 50.19 BD-M Supply & Fixing of Rock/ Stone Finished Full Body Steptiles Stone Vitrifid Tiles with As directed by One Square 2650 450
and dado thick Bullnose for Ready to install Steps and Risers 12 mm thick and required width wide Engineer-in-charge Metre
in plain pattern including Cement float, filling joints, with neat cement slurry, Natural
sand, curing and cleaning complete. with prior approval of concerned Superitending
Engineer.
1741 Oil Painting 50.20 IS 12594-1988 Providing hot dip galvanizing conforming to IS 12594-1988 to reinforcement bars, having As directed by One Metric 15513 2637
mass of zinc coating shall not be less than 610 grm/ One Square Metre of bar surface area Engineer-in-charge Tonne
factory control process with Degreasing, Rinsing, Acid Pickling, Again Rinsing after
picking, Fluxing, Hot Dip Galvanizing in molten Zinc bath Having Zinc purity of bath
minimum 98.5% Quenching & Passivation Process.
32 mm to 40 mm dia. with prior approval of concerned Superitending Engineer.
Page 333
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1742 Oil Painting 50.21 IS 12594-1988 Providing hot dip galvanizing conforming to IS 12594-1988 to reinforcement bars, having As directed by One Metric 16296 2770
mass of zinc coating shall not be less than 610 grm/ One Square Metre of bar surface area Engineer-in-charge Tonne
factory control process with Degreasing, Rinsing, Acid Pickling, Again Rinsing after
picking, Fluxing, Hot Dip Galvanizing in molten Zinc bath Having Zinc purity of bath
minimum 98.5% Quenching & Passivation Process.
16 to 25 mm dia with prior approval of concerned Superitending Engineer.
1743 Oil Painting 50.22 IS 12594-1988 Providing hot dip galvanizing conforming to IS 12594-1988 to reinforcement bars, having As directed by One Metric 16941 2880
mass of zinc coating shall not be less than 610 grm/ One Square Metre of bar surface area Engineer-in-charge Tonne
factory control process with Degreasing, Rinsing, Acid Pickling, Again Rinsing after
picking, Fluxing, Hot Dip Galvanizing in molten Zinc bath Having Zinc purity of bath
minimum 98.5% Quenching & Passivation Process.
8 to 12 mm dia with prior approval of concerned Superitending Engineer.
1744 Block masonary 50.23 BD-I Providing and constructing non load bearing wall with 200 mm Horizontally perforated As directed by One Square 2840 555
THERMO clay hollow blocks with compressive strength not less than 35Kilogram/Sqcm, Engineer-in-charge Metre
U value of 0.60 W/m2K, Water Absorption of 15% mansonry to be done using sand
cement mortar 1:6 with blocks of size 400mm x 200 mm x 200 mm (12.5 brick per One
Square Metre. excluding mortar joint thickness) including cost of material, labour charges,
scaffolding, curing at all height, complete as per specification & directions of Engineer in
charge. Cost shall be inclusive of filling the blocks with cement mortar at exposed
junctions and filling with concrete using 12mm down size aggregates at Window and door
Jambs for fixing hold fast.anchors etc. It must be green building certified from IGBC and
Griha and Should comply IS code 3952 with prior approval of concerned Superitending
Engineer.
Page 334
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1745 Block masonary 50.24 IS code 3952 Providing and constructing non load bearing wall with 150 mm Horizontally perforated As directed by One Square 2750 467
THERMO clay hollow blocks with compressive strength not less than 35Kilogram/Sqcm, Engineer-in-charge Metre
U value of 0.60 W/m2K, Water Absorption of 15% mansonry to be done using sand
cement mortar 1:6 with blocks of size 400mm x 150 mm x 200 mm (12.5 brick per One
Square Metre. excluding mortar joint thickness) including cost of material, labour charges,
scaffolding, curing at all height, complete as per specification & directions of Engineer in
charge. Cost shall be inclusive of filling the blocks with cement mortar at exposed
junctions and filling with concrete using 12mm down size aggregates at Window and door
Jambs for fixing hold fast.anchors etc. It must be green building certified from IGBC and
Griha and Should comply IS code 3952 with prior approval of concerned Superitending
Engineer.
1746 Plastering and 50.25 Dry wall cladding with clay tile; Designing, supplying and fixing of Clay tile of As directed by One Square 10590 400
pointing Wienerberger (Red Series or Grey Series) or Equivalent with suitable size and thickness Engineer-in-charge Metre
not less than 20 mm as per manufacturer with approved colour and pattern with
composition of finest powdered clay and colour mixtures. The clay tile shall be fixed on
the suitable farming system by using continuous aluminium profiled section as per
manufacturer with suitable size and spacing to withstand the structural design criteria
specifled in the technical specification by using necessary HDG brackets, SS316 grade
anchor bolts etc as per manufacturer specification. Cladding joints should be with open
groove system. with prior approval of concerned Superitending Engineer.
1747 Block masonary 50.26 Providing and constructing non load bearing wall with 200 mm Grinded Horizontally As directed by One Square 1822 130
perforated clay hollow blocks with compressive strength not less than 35Kilogram/Sqcm, Engineer-in-charge Metre
U value of 1.00 W/m2K, Water Absorption of 15% tolerance on Grinded brick height is
+/- 1.00 mm, masonry to be done using POROTHERM Dry Flx. Systeam with 20 mm
thick S shape application (Application method need to be followed as per Wienerberger
methodology) blocks of size 400mm x 200 mm x 200 mm (12.5 brick per One Square
Metre.) including cost of material, labour charges, scaffolding, curing at all height,
complete as per specification & directions of Engineer in charge. Cost shall be inclusive
of end bricks to be used at window and door jambs for fixing hold fast. anchors
etc.,plastering is to be done as per requirement .and is to be considered seperatly with
prior approval of concerned Superitending Engineer.
Page 335
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1748 Block masonary 50.27 Providing and constructing non load bearing wall with 150 mm Grinded Horizontally As directed by One Square 1650 130
perforated clay hollow blocks with compressive strength not less than 35Kilogram/Sqcm, Engineer-in-charge Metre
U value of 1.2 W/m2K, Water Absorption of 15% tolerance on Grinded brick height is+/-
1.00 mm, masonry to be done using Dry Flx. Systeam with 20 mm thick S shape
application (Application method need to be followed as per Wienerberger methodology)
blocks of size 400mm x 150 mm x 200 mm (12.5 brick per One Square Metre.) including
cost of material, labour charges, scaffolding, curing at all height, complete as per
specification & directions of Engineer in charge. Cost shall be inclusive of end bricks to
be used at window and door jambs for fixing hold fast. anchors etc.,plastering is to be
done as per requirement and is to be considered seperatly
1749 Block masonary 50.28 BD-I Providing and constructing non load bearing wall with 100 mm Grinded Horizontally As directed by One Square 1325 130
perforated clay hollow blocks with compressive strength not less than 35Kilogram/Sqcm, Engineer-in-charge Metre
U value of 1.7 W/m2K, Water Absorption of 15% tolerance on Grinded brick height is
+/- 1.00 mm, masonry to be done using Dry Flx. Systeam with 20 mm thick S shape
application (Application method need to be followed as per Wienerberger methodology)
blocks of size 400mm x 100 mm x 200 mm (12.5 brick per One Square Metre.) including
cost of material, labour charges, scaffolding, curing at all height, RCC. stiffener band
necessary at every 1.0 meter height of the wall, complete as per specification & directions
of Engineer in charge. Cost shall be inclusive of end bricks to be used at window and
door jambs for fixing hold fast. anchors etc.,,plastering is to be done as per requirement
,and is to be considered seperatly with prior approval of concerned Superitending
Engineer.
1750 Plastering and 50.29 BD-I Providing and fixing of imported clay tiles pn M.S. frame Work using Maditerranean plus As directed by One Square 3062 555
pointing roof tiles of Wienberger tile of colour Red Engobe or equivalent with necessary Engineer-in-charge Metre
accessories required to fix tile including clips and screw (Prior permission of S.E. is to be
obtained before inclusion)
1751 Waret supply and 50.30 BD-V Providing and fixing Ductile iron manhole cover of light/medium/heavy duty with frame As directed by One Kilogram 75 12
sanitary of any size over inspection chamber etc. complete (Prior permission of S.E. is to be Engineer-in-charge
obtained before inclusion of this item in the estimate)
Page 336
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1752 Waret supply and 50.31 BD-V Providing and constructing Ductile Iron circular manhole 45 cm dia. At top 90 cm at As directed by One Number 12000 2040
sanitary bottom up to 1.80 meter to 2.70 meter depth including excavation, laying 1:4:8 cement Engineer-in-charge
concrete bedding 15 cm thick burnt brick mansonry with 1:1 cement mortar plaster 25 mm
thick inside and outside 20 mm (1:3) ductile iron heavy type cover with ring
125Kilogramin weight. High strength. More life and Durability, Good Antiskid Grip,
Suitable to heavy theatric loading, Light weight casting after cost benefits for
Transportation Refilling etc. as per requirement. with prior approval of concerned
Superitending Engineer.
1753 Geosynthetic 50.32 MORTH Section- Providing and laying CE Marked Woven Polypropylene Geotextile indigenously As directed by One Square 160 44
700 manufactured from black UV stabilized polypropylene tape yarn of Techfab India on the Engineer-in-charge Metre
prepared subgrade for Reinforcement cum separation cum drainage & filtration
application with necessary overlaps as per drawing etc. complete. (Specification: MORTH
Section-700) with prior approval of concerned Superitending Engineer. a)TFI-5300 Type-I
Geosynthetic 50.33 MORTH Section- Providing and laying CE Marked Woven Multifilament Polyester Geotextile indigenously As directed by
700 manufactured using high molecular weight, high tenacity polyester filament yarn with Engineer-in-charge
high tensile strength, low elongation and low creep of Techfab India on the prepared
subgrade for Reinforcement cum separation cum drainage & filtration application with
necessary overlap as per drawing etc. complete. (Specification: MORTH Section-700)
with prior approval of concerned Superitending Engineer.
Page 337
Geosynthetic MORTH Section-
700
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Page 338
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Geosynthetic 50.37 MORTH Section- Providing and laying CE Marked knitted and PVC coated Polyester Uniaxial Geogrid As directed by
700 (Techgrid) indigenously manufactured from selected high tenacity polyester yarn with Engineer-in-charge
high molecular weight of Techfab India (> 25000 g/mol), and low carboxyl end group
(<30 mm mol /Kilogram) (extruded PP geogrid & Polyester strip & Geostrip, steel strips
not allowed & not accepted ) with granular fill as per design prepared by technical
provider of reinforced earth wall and slope. The reinforced earth wall and slope should
have 100% coverage of 5m width knitted and PVC coated Polyester geogrid. (Coating of
Geogrid/Reinforcing geosynthetic material with LDPE, approved, Bitumen and any other
coating will not be allowed and will not be accepted) for reinforced soil wall and
reinforced slope application, etc. complete (Specification: MORTH Section-3100).with
prior approval of concerned Superitending Engineer.
Page 339
Geosynthetic MORTH Section-
700
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Geosynthetic 50.42 MORTH Section- Providing and laying CE Marked Glassfibre GeoComposite (TechGlass AIC) As directed by
700 indigenously manufactured from high performance glass fibre roving to form a reticular Engineer-in-charge
structural material with a unique combination of fused fibre glass and polypropylene non-
woven needle punched geotextile to asphalt overlay flexible pavements and asphalt
overlay distressed rigid pavements of Techfab India for Reinforcement, seizure reflective
cracks, reduced surface rutting & water infiltration. (Specification: MoRTH section-
700).with prior approval of concerned Superitending Engineer.
Page 340
Geosynthetic MORTH Section-
700
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Page 341
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Geosynthetic 50.45 MORTH Section- Construction of Reinforced Earth Wall in M-35 Block Facia by Providing and Laying CE As directed by
700 marked Knitted and PVC coated Polyester Uniaxial Geogrid (Techgrid) of Techfab India Engineer-in-charge
indegeniously manufactured from selected high tenacity polyester yarn with high
molecular weight (> 25000 g/mol), and low carboxyl end group (<30mmol/Kilogram) for
Reinforced soil wall (extruded PP geogrids & Polyester strips & Geostrips, Steel Strips
not allowed & not accepted) with granular fill of PHi-32 degree (design is to be carried
out in accordance with BS-8006 / FHWA) with concrete block by M-35 as facia, casting
& erection of blocks with Techgrid, providing & laying levelling pad by M-15, providing
and laying coping beam by M-35, providing and laying 300mm thick filtermedia etc.
completed as per necessary drawing and instruction of Engineer-in-charge. Excluding
providing, laying and compacting selected backfill and retained fill behind the wall,
excavation and ground improvement, if any. The reinforced earth wall and slope should
have 100% coverage of 5m width Knitted and PVC coated Polyester Geogrid. (Coating of
Geogrid/ Reinforcing geosynthetic material with LDPE, approved, Bitumen and any other
coating will not be allowed and will not be accepted). (Specification: MORTH Section-
3100) with prior approval of concerned Superitending Engineer.
Page 342
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Road safty work 50.46 IS: 10146-1982, Providing Heavy Duty Fibre Glass Reinforced Plastic Temporary Barricade of 1.75 m As directed by
IS:10141-1982 hight, with base width of 430 mm as a provision to accept water ballasting of 101 Itrs-110 Engineer-in-charge
Ltrs approx. and arrangement for traffic diversion such as traffic signals during
construction at site, for day and night as per requirement. The raw material shall be UV
stabilized Linear Low Density Polyethylene and should meet the requirements stipulated
in standard IS: 10146-1982, IS:10141-1982 and should also comply to FDA:CFR Title
21.177.1520. Olefin Polymers , with specific FRP Grade 300-104 reinforced during
moulding process to the permissible extent for improved impact strength. Qualification
Criteria: For qualifying the sample , few tests shall be performed at Government Lab OR
NABL Accredited Lab on Site Safety Fence sample, failure or deviations in test results of
sample shall be disqualified.The tests and qualifying results are as under, (a) tensile
strength at yield by ASTM D 638 =20.93 mPA, (b) Elongation at break ASTM D 638 =
121.66 mPA (c) Flexural Modulus ASTM D 790 = 633.76 mPA (d) Izod Impact Strenth
(Notched) ASTM D 256 = 4.41Kilogram/ One Square Metre (e) Izod Impact Strenth (Un-
Notched) ASTM D 256 = 67.04Kilogram/ One Square Metre (f) Drop Impact strength
25KilogramLoad from 1 m, 2 m & 5m height the weight of empty single Rotomoulded
Plastic Barricade without water ballasting shall be 34 Kilograms approx. & total weight
after water allasting shall be 135 Kilograms -140 Kilograms +/- 5 Kilograms
(tolarance)The main Barricade body of hight 1750 mm approx is connected with the
Extension body through 4 set of nut bolt washers .extenstion body through 4 set of nut
bolt washers. Extension body is designed with 9 Nos kiss offs on rear side; the dimension
of Extension body are 1500 mm (length),70 mm (width),250 mm (effetive height after
fixing ) & dimension of its male collarare 1420 mm (length),25 mm (width),30 mm
approx ( height), it is inserted in U groove provisioned on top of main body Barricade
Model for interlconnecting.the minimum thickness of all over surface of plastic barricaed
shall be 5 mm +/- 20%.the rear bottam shall have to provision to fix two brackets at both
end in corner for anchoring purpose .each rear bracket is constructed through rod of
Dia.60 mm with curvature welded with MS strip of 3 mm thick ,50 mm width and 90
mm length at its top and base ,effective bracket shall be 410 mm approx. the anchoring
hole in each bracket shall be 18 mm dia. for routine the MS bolts of 16 mm thickness and
1785 a a) For 725 mm height (LType Jersey Barrier ) ,Empty Weight:6.67 Kilogram/ One Running 1846 314
Rgm,Weight Full : 35.89Kilogram/ Rgm approx. (After Water / Sand Filling) Metre
1786 b b) For 750 mm height (With Interlocking provison - For Traffic Delineation Applications One Running 2872 488
) , Empty Weight:9.04 Kilogram/ Rgm,Weight Full : 57.14Kilogram/ Rgm approx. (After Metre
Water / Sand Filling)
1787 c c) For 750 mm height ( Jersey Barrier Model with unique Interlocking Provision) , One Running 5026 854
Empty Weight:9.0 Kilogram/ Rgm,Weight Full : 55.00Kilogram/ Rgm approx. (After Metre
Water / Sand Filling)
Page 343
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1788 d d) Site Safety Fence (1.75 Mtrs(H)) (Efficient Substitution to sheet Metal Barricade) , One Running 8103 1377
Empty Weight 16.57: Kilogram/ Rgm,Weight Full : 74.29 Kilogram/ Rgm approx. (After Metre
Water / Sand Filling)
1789 e e) Site Safety Fence (2.00 Mtrs(H)) (Efficient Substitution to sheet Metal Barricade) , One Running 8718 1482
Empty Weight : 17.00 Kilogram/ Rgm,Weight Full : 70.00 Kilogram/ Rgm approx. (After Metre
Water / Sand Filling)
1790 Road work 50.47 RD organosilance Nanotechnology for Bituminous organosilance nanotechnology such as As directed by One Kilogram 1400 238
Zycotherm added in the bitumen binder @ 0.1% dosage to the weight of the bitumen at Engineer-in-charge
HMA plant to schive chemical bonding,complete coating and consistant compaction in
various bituminous mixes such as BM/DBM/Carpet/sealcoat/MSS/SDBC etc.as per the
direction of Engineer-in-charge with prior approval of concerned Superitending Engineer.
1791 Road work 50.48 RD Water proofing of subgrade:waterproofing on top compacted (as per relevant MORT&H As directed by One Square 15 2
specification)sub grade and shoulder soil base with organosilance Nanotechonology & Engineer-in-charge Metre
nano acrylic co-polymer with water (<1000 ppm TDS)in the ratio of
1KilogramOrganosilance Nanotechonology :1Kilogramnano acrylic co-polymer :200 liter
water spray @3 liter/ One Square Metre in two spray application (1.5 liter +1.5 liter) as
per direction of the Engineer-in-charge. with prior approval of concerned Superitending
Engineer.
1792 Road work 50.49 RD providing and applying primer coat with bitumen emulsion on prepared surface of As directed by One Square 18 3
Aggregate layer including clearing of road surface and spraying primer mixed with Nano- Engineer-in-charge Metre
Technology silance in the ratio 1:100:100 (1Kilogramsilance :100KilogramSS1
Emulsion:100 liter water);the rate of 1 Liter/ One Square Metre using mechanical means
as per the direction of Engineer-in-charge. with prior approval of concerned Superitending
Engineer.
1793 Road work 50.50 RD Tack coat (with Silance nanotechnology):preparing and applying of water soluable organo As directed by One Square 8 2
silance nanotechnology (for bitumen emulsion application ,IRC approved) with cationic Engineer-in-charge Metre
bitumen emulsion CRS1 amd water (< 1000 ppm TDS) in the ratio of 1:4Kilogram organo
silance : 100Kilogram cationic bitumen emulsion CRSS1: 200 liter water. with prior
approval of concerned Superitending Engineer.
Page 344
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1794 Road work 50.51 RD Construction of stabilised soil base with organo silance by providing locally available As directed by One Cubic Metre 1613 275
moorum/soil(70%) mixed with 30% GSB ॥ with 2% cement by MDD of mix, 0.6 Engineer-in-charge
Kilogram/Cum nanotechnology silane & 0.6 Kilogram/ cum of Acrilic Nano - Co
polymer, Spreading in uniform layers with grader on prepared surface by mixing in place
method withrotavator at OMC and compacting with smooth wheel roller to achieve the
desired density, complete as per Table 2.3 of IRC SP - 77-2008 as per direcion of
Engineer - in -charge. with prior approval of concerned Superitending Engineer.
1795 Road work 50.52 RD Construction of stabilised soil base with organo silance by providing locally available As directed by One Cubic Metre 1701 289
moorum/soil(70%) mixed with 30% GSB ॥ with 3% cement by MDD of mix, 0.6 Engineer-in-charge
Kilogram/Cum nanotechnology silane & 0.6 Kilogram/ cum of Acrilic Nano - Co
polymer, Spreading in uniform layers with grader on prepared surface by mixing in place
method withrotavator at OMC and compacting with smooth wheel roller to achieve the
desired density, complete as per Table 2.3 of IRC SP - 77-2008 as per direcion of
Engineer - in -charge.with prior approval of concerned Superitending Engineer.
1796 Road work 50.53 RD Construction of stabilised soil base with organo silance by providing locally available As directed by One Cubic Metre 1789 304
moorum/soil(70%) mixed with 30% GSB ॥ with 4% cement by MDD of mix, 0.6 Engineer-in-charge
Kilogram/Cum nanotechnology silane & 0.6 Kilogram/ cum of Acrilic Nano - Co
polymer, Spreading in uniform layers with grader on prepared surface by mixing in place
method withrotavator at OMC and compacting with smooth wheel roller to achieve the
desired density, complete as per Table 2.3 of IRC SP - 77-2008 as per direcion of
Engineer - in -charge.
1797 Road work 50.54 RD Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the As directed by One Cubic Metre 730 325
boulders / Rubble at the road side breaking them to required gradation including Engineer-in-charge
conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior
approval of sample stack of broken metal by the Ex. Engineer is necessary the date of
approval will form part of the measurements) a)80 mm Metal, By breaking rubble
obtained by blasting.(Hand broken). with prior approval of concerned Superitending
Engineer.
1798 Road work 50.55 RD Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the As directed by One Cubic Metre 780 350
boulders / Rubble at the road side breaking them to required gradation including Engineer-in-charge
conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior
approval of sample stack of broken metal by the Ex. Engineer is necessary the date of
approval will form part of the measurements) a)40 mm Metal, By breaking rubble
obtained by blasting.(Hand broken).
Page 345
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1799 Road work 50.56 RD Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the As directed by One Cubic Metre 700 335
boulders / Rubble at the road side breaking them to required gradation including Engineer-in-charge
conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior
approval of sample stack of broken metal by the Ex. Engineer is necessary the date of
approval will form part of the measurements) a)80 mm Metal, By breaking
Boulders (Hand broken).
1800 Road work 50.57 RD Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the As directed by One Cubic Metre 750 360
boulders / Rubble at the road side breaking them to required gradation including Engineer-in-charge
conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior
approval of sample stack of broken metal by the Ex. Engineer is necessary the date of
approval will form part of the measurements) a)40 mm Metal, By breaking Boulders
(Hand broken).
1801 Road work 50.58 RD Spreading 80/40 mm metal for road work including sectionong etc complete as directed As directed by One Cubic Metre 85 75
by Engineer in charge . Engineer-in-charge
1802 Road work 50.59 RD Compacting the sub grade/gravel/oversize metal (200 mm loose) layers for all width with As directed by One Square 27 4
Power roller having weight 8 to 10 MT. including necessary, labour, materials and Engineer-in-charge Metre
artificial watering complete.
1803 Road work 50.60 RD Compacting the sub grade/gravel/oversize metal (200 mm loose) layers for all width with As directed by One Square 37 4
Vibratory roller having weight 8 to 10 MT. including necessary, labour, materials and Engineer-in-charge Metre
artificial watering complete.
1804 Road work 50.61 RD Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with As directed by One Square 25 4
Power roller having weight 8 to 10 MT. including necessary, labour, materials and Engineer-in-charge Metre
artificial watering complete.
1805 Road work 50.62 RD Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with As directed by One Square 34 4
vibratory roller having weight 8 to 10 MT. including necessary, labour, materials and Engineer-in-charge Metre
artificial watering complete.
1806 Miscellaneous 50.79 BD-W Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent As directed by One Square 372 0
approved brand, paint should decomposes organic substances and inorganic gases(NOx, Engineer-in-charge Metre
VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains
Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l).
plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has
to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent.
Warranty Should be given by the Manufaturer The work should be done by the
Manufacturer Recommended applicator and he should be able to furnish stage wise onsite
technical reports from the concerned company technologist.
Page 346
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1807 Miscellaneous 50.80 BD-W Supply of ready mix patch repairing compound as per section 3000.2.2(filling pothole and As directed by One Kilogram 25 0
patches repair with specific approval of the engineer),MORT&H specifications for roads Engineer-in-charge
and bridge works,5th Revision, for instant repair of surface defects of road under all
weather conditions.The premix should consists of a binder with hydrophilic properties and
accelerated adherence to all types of aggregares and can be applied on all patches and
potholes including water logged patches and poyholes and in rainy conditions. The
material should be suitable for both Bituminous and concrete roads with quick setting
properties and allow traffic to be released within 10 mins.of patch or pothole repair.the
material should for use on roads with both passanger and heavy commercial vechiles.The
mix should be suitable for reparing of surfacing course and should be comparising of fine
aggregates 0-10 mm,(5.5-7.5 %).additives as ewquired.the mix should packed in bags
which can be easily handled manually and be storable under normal storage conditions for
at least 8 month.
Door and 50.81 BD-T Fire Door 45mm 1HR FRL (60/60) 3 Criteria - INTEGRITY / INSULATION/ As directed by
Windows STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2. Engineer-in-charge
Providing 60 min Fire rated doors system duly tested for 3 criteria - Integrity, Insulation
and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 at National Test
House, Govt of India laborator and/or with Central Building Research Institute, Govt of
India undertaking with standard heating conditions as specified in IS:3614 Part II 1992
and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability
(i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of
140° C above the ambient temperature on the exposed surface of the shutter. The fire
doors are tested with NCBN technology ("Non Combustible by Nature"). with prior
approval of concerned Superitending Engineer.
1808 a) Door Frame: Supplying frames for Fire resistant door shutters 1st class Malaysian One Running 1569 540
Hardwood Frame densified (810 Kilogram/cum) and pressure treated with fire retardant Metre
chemicals in vacuum impregnation vessel under 160 psi pressure as per IS:401and kiln
seasoned to moisture below 15% as per IS:1141 of section 120 X 60 mm spray quoted
with 2 coats of intumescent paint of minimum 200 micron, with single row of Brush-
Type ASTROFLAME intumescent strip of size 10mm x 4mm affixed in the slit of the
Frame for fire and smoke sealing, etc. complete.
Page 347
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1809 b)Shutter : Providing of 65mm thick asbestos free composite - 3 criteria - fire, heat and One Square 9014 2738
smoke check Accoustic Door Shutter with flame guard of 120 minutes IS3614 part -II Metre
comprising of 2x9mm Calcium Silicate boards, Chemical treated internal timber with Fire
retardant chemicals in pressure impregnation vessels under 160 PSI pressure as per
IS:401and kiln seasoned to moisture below 15% as per IS:1141 frame work of 100x32
mm with 32mm thick infill of ceramic fiber (density 128Kilograms/CMT), vermaculite
mix faced with 6mm Fire retardant High Density ply, internally lipped with hardwood
beading, and pasted in Hydraulic Press under 50 tonnes pressure, spray quoted with 2
coats of In tumescent paint of minimum 200 micron, and with 1 row of Brush- Type
Astroflame® intumescent strip (imported) of size 10mmx4mm concealed for fire and
smoke sealing in the grooves in the shutter on all edges except bottom, without any
external lipping.
1810 c) Vision Panel: One Square 33475 -
1 HR rated E Class clear high stress fire rated glass is pre fabricated strategically inside Metre
theshutter structure with 10 mm inside the shutter on all sides with U- glazing. An
additional insulated powdercoated 'Z' channel of 16 swg MS sheet to be fixed for
reinforcement of the joints. With clear fire resistant glass panes 11mm thick having
minimum 120 minutes fire Description
Door and 50.82 BD-T Providing of Accoustic Door to effectively control noise inconference rooms, As directed by
Windows broadcasting studios, theatres and music practice rooms. with prior approval of concerned Engineer-in-charge
Superitending Engineer.
1811 a)Door Frame: Providing Frames for Accoustic door shutters with double rabbit of 68mm One Running 1936 540
1st class Malaysian Hardwood Frame densified and pressure treated with chemicals in Metre
vacuum impregnation vessel under 160 PSI pressure as per IS:401and kiln seasoned to
moisture below 15% as per IS:1141 of section 120 X 70 mm spray quoted with 2 coats of
In tumescent paint of minimum 200 micron, with 1 row of Hafele Accoustic seals
concealed in the groove of the Frame for noise control, etc. complete as per direction of
Engineer in Charge
Page 348
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1812 b)Shutter: Providing of 65mm thick Accoustic Door Shutters with wooden structure One Square 13650 2738
comprising of Chemical treated internal timber with anti termite chemicals in pressure Metre
impregnation vessels under 160 PSI pressure as per IS:401and kiln seasoned to moisture
below 15% as per IS:1141 frame work of 100x 48 mm with 48 mm thick infill of ceramic
vermiculite mix of density 54Kilograms/CMT, 3mm sheet rubber interlayer sheet on one
side for acoustic property, faced with 6mm High Density Waterproof Ply confirming to IS
Code 2201, internally lipped with hardwood beading, and pasted in Hydraulic Press under
50 tonnes pressure, spray quoted with 2 coats of PU paint of minimum 200 micron of
color of engineer choice (any Veneer or Lamination will cost extra), without any external
lipping along with double rebatting in shutters & accoustic seal
Door and 50.83 BD-T 2 Hour Insulated, Flame, Smoke Radiation check Lead Lined Fire Door 57mm 2HR FRL As directed by
Windows (120/120) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR - Engineer-in-charge
Fire Door Tested in accordance to IS: 3614 Part 2. with prior approval of concerned
Superitending Engineer
Providing of 120 min Fire rated lead lined doors system duly tested for 3 criteria -
Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22
with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20
& 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the heat
radiation, temperature rise on the non fire side to the maximum of 140° C above the
ambient temperature on the exposed surface of the shutter. The fire doors are tested with
NCBN technology ("Non Combustible by Nature"). Lead lined to check radiation. Code
No; 2 Hour Insulated, Flame, Smoke Radiation check Lead Lined Fire Door 57mm 2HR
FRL (120/120) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN
DOOR - Fire Door Tested in accordance to IS: 3614 Part 2.
1813 a) Door Frame: Providing Frames for Lead Lined Fire resistant door shutters 1st class One Running 3033 540
Malaysian Hardwood Frame densified and pressure treated with fire retardant chemicals Metre
in vacuum impregnation vessel under 160 PSI pressure as per IS:401and kiln seasoned to
moisture below 15% as per IS:1141 of section 140 X 70 mm with 45mm thick two layered
3mm Lead Line Sheets with 10mm overlap from either side & spray quoted with 2 coats
of In tumescent paint of minimum 200 micron, with 1 row of Brush- Type Astroflame®
intumescent strip (imported) of size 10mmx4mm concealed in the groove of the Frame for
fire and hot and cold smoke sealing, etc. complete as per direction of Engineer in Charge
Page 349
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1814 b) Shutter: Providing of 57mm thick asbestos free composite, 'TUFWUD' brand - 3 One Square 20690 2738
criteria - fire, heat and smoke check Lead Lined Door Shutter with flame guard of 120 Metre
minutes IS3614 part -II comprising of 2x9mm Calcium Silicate boards, Chemical treated
internal timber with Fire retardant chemicals in pressure impregnation vessels under 160
PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 frame
work of 100x30 mm with 30mm thick infill of ceramic fibre (density 128
Kilograms/CMT) vermiculite mix, 3mm thick Lead Sheet on one side faced & 3mm Fire
retardant High Density Fibreboard, internally lipped with hardwood beading, and pasted
in Hydraulic Press under 50 tonnes pressure, spray quoted with 2 coats of Intumescent
paint of minimum 300 micron, and with 1 row of Brush- Type Astroflame® intumescent
strip (imported) of size 10mmx4mm concealed for fire and smoke sealing in the grooves
in the shutter on all edges except bottom, without any external lipping.
Door and 50.84 BD-T Providing of Lead Lined Door system with 120x60 mm Hardwood Frames, interlayered As directed by
Windows with 3mm lead and 44mm Solid core flush door shutters conforming to the I.S. Engineer-in-charge
specification 2202-1991 (specification for wooden flush door shutter – solid core type),
interlayered with 3mm lead with prior approval of concerned Superitending Engineer.
1815 a) Door Frame: Providing Frames for Lead Lined door shutters 1st class Malaysian One Running 2575 540
Hardwood Frame densified and pressure treated with fire retardant chemicals in vacuum Metre
impregnation vessel under 160 PSI pressure as per IS:401 and kiln seasoned to moisture
below 15% as per IS:1141 of section 120 X 70 mm with 45mm thick two layered 3mm
Lead Line Sheets being overlapped from either side, spray quoted with 2 coats of Enamel
paint after one coat of white wood primer of minimum 200 micron etc. complete as per
direction of Engineer in Charge. with prior approval of concerned Superitending Engineer.
1816 b) Shutter: Supplying of ' 44mm Solid core flush door shutters conforming to the I.S. One Square 17126 2738
specification 2202-1991 (specification for wooden flush door shutter – solid core type). Metre
32mm Wooden structure of 1st class Hardwood or Pinewood of at least 50mm width, top
and bottom rails of 75mm width, with filler material without any gap of 1st Class
Hardwood, or pine wood, all chemically treated for termite and borer resistance as per IS
401:2001 under minimum 150 PSI pressure, and seasoned as per IS 1141: 1993 upto
desired moisture level as per IS 287, with one side 3mm HDF & other side 3mm lead &
6mm BWP ply; all hot-pressed with Phenol Formaldehyde resin, internally lipped with
hardwood beading, and pasted in Hydraulic Press under 50 tonnes pressure, spray quoted
with 2 coats of enamel paint of minimum 300 micron. with prior approval of concerned
Superitending Engineer.
Page 350
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1817 water supply and 50.85 BD-V Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating As directed by One Kilogram 288 58
sanitary with frame of Various sizes, weight and types and load bearing capacity as per EN-124, Engineer-in-charge
equivalent NECO with prior approval of concerned Superitending Engineer.
water supply and 50.86 BD-V Supplying installation testing and commissoning of Hubless centrifugally cast iron pipes As directed by
sanitary as per ISI 15905 equivalent to NECO inclusive of all necessary special fitting like bends, Engineer-in-charge
tees, and caps, 'Y' bends for cleaning offsets, junctions, cowls, etc. lad under floor/fixed
on walls and in pipe shafts etc. complete. The quoted rate should include lead and lifting
charges to all levels, necessary scaffolding and supports like hanger supports grip bolts
and CV sheet 304 grade clamps etc. with prior approval of concerned Superitending
Engineer.
1818 a a) 50 mm dia One Running 1657 127
Metre
1819 b b) 65 mm dia One Running 1841 127
Metre
1820 c c) 75 mm dia One Running 1964 127
Metre
1821 d d) 100 mm dia One Running 2256 127
Metre
1822 e e) 150 mm dia One Running 4259 465
Metre
1823 f f) 200 mm dia One Running 6787 465
Metre
1824 e g) 250 mm dia One Running 7538 465
Metre
1825 f h) 300 mm dia One Running 9659 465
Metre
Page 351
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1828 Accoustic 51.03 Providing & Fixing in position, Acoustical Panelling made from Gypsum plain 12mm As directed by One Square 2300 690
panels on, 50 x 50 mm Sal-wood frame of 600 x 600 c to c having wooden supports from Engineer-in-charge Metre
wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken
mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-
items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions &
Complete in all aspects. including all materials labour,finishing etc complete
1829 Accoustic 51.04 Providing & Fixing in position, Acoustical Panelling made from 12mm wp Ply wood & As directed by One Square 5090 1500
1.5mm laminate on, 50 x 50 mm Sal-wood frame of 600 x 600 c to c having wooden Engineer-in-charge Metre
supports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick
with chicken mesh on wall side, including cost of required Cut-Outs, decorative
mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical
Design & Instructions & Complete in all aspects.including all materials labour,finishing
etc complete
1830 Accoustic 51.05 Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood As directed by One Square 23700 7100
frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm Engineer-in-charge Metre
synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply &
veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.) 4
no each leaf, with Door-closer (Dorma / Geze or eq.) including cost of required Cut-
Outs, decorative mouldings / finishing-items / melamine polish & Scaffolding as per
Architectural & Acoustical Design & Instructions & Complete in all aspects .including all
materials labour,finishing etc complete
Page 352
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1831 Accoustic 51.06 Providing & fixing in position Stage flooring Made from 18mm plywood 1200 x 2400 & As directed by One Square 8215 2460
18mm Teakwood planks 100 x 800 having tongue & grove on Sal-wood frame of 50 x Engineer-in-charge Metre
100 at 600mm c to c on stage surface including cost of required Cut-Outs, decorative
mouldings / finishing-items / polish etc., as per Architectural & Acoustical Design &
Instructions & Complete in all aspects. .including all materials labour,finishing etc
complete
1832 Accoustic 51.07 Providing & Fixing in position, Acoustical Ceiling made from Gypsum Plain Panels on As directed by One Square 1465 430
approved heavy duty G.I. frame ceiling channels at 450 c to c, & intermediate channels Engineer-in-charge Metre
not more than 1200 c to c, along with ply wood forms suspended with Hangers from
Roof, in front of 1000 Gsm synthetic wool 50 mm thick, with Paint, including cost of
required Cut-Outs, decorative mouldings / finishing-items & Scaffolding, as per
Architectural & Acoustical Design & Instructions & Complete in all aspects.including all
materials labour,finishing etc complete
1833 Accoustic 51.08 Providing & Fixing in position, Acoustical Ceiling made from Compressed polyester fibre As directed by One Square 2865 850
nonwoven 9mm panels on approved heavy duty GI frame 300 mm c to c & intermediate Engineer-in-charge Metre
channels at 1200 mm c to c, suspended with Hangers from Roof, including cost of
required Cut-Outs, decorative mouldings / finishing-items & Scaffolding, as per
Architectural & Acoustical Design & Instructions & Complete in all aspects including all
materials labour,finishing etc complete
1834 Accoustic 51.09 Providing & Fixing in position, Acoustical Ceiling made from Rigitone 8/18 perforated As directed by One Square 4135 1200
panels on approved heavy duty G.I. frame, ceiling channels at 300 c to c, & intermediate Engineer-in-charge Metre
channels not more than 1200 c to c, suspended with Hangers from Roof, in front of 1000
Gsm synthetic wool 50 mm thick, with Paint, including cost of required Cut-Outs,
decorative mouldings / finishing-items & Scaffolding, as per Architectural & Acoustical
Design & Instructions & Complete in all aspects including all materials labour,finishing
etc complete
1835 Accoustic 51.10 Providing & Fixing in position, Acoustical Panelling made from 12mm thick Agro wood As directed by One Square 5075 1500
strips of 50, 75 7 100 mm width on 50 x 50 mm Sal-wood frame of 600 x 600 c to c Engineer-in-charge Metre
having supports from wall of required length, in front of 1000 gsm synthetic wool 50 mm
thick with approved coloured fabric on strips side & chicken mesh on wall side, including
cost of required Cut-Outs, decorative mouldings / finishing-items / Melamine Polish &
Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all
aspects. including all materials labour,finishing etc complete
Page 353
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1836 Accoustic 51.11 Providing & Fixing in position, Fabric wrapped Compressed polyester fibre nonwoven As directed by One Square 2950 875
9mm panels above the wood wool board panelling or existing sal wood frame, using Engineer-in-charge Metre
adhesive, as per Architectural & Acoustical Design & Instructions & Complete in all
aspects. including all materials labour,finishing etc complete
1837 Accoustic 51.12 Providing & Fixing in position, Partition made from 12mm thick Gypsum from both As directed by One Square 2524 750
sides on 50 x 50 mm Sal-wood frame of 600 x 600 c to c, having of 800 gsm synthetic Engineer-in-charge Metre
wool 50 mm thick in between, including cost of required Cut-Outs & Scaffolding, as per
Architectural & Acoustical Design & Instructions & Complete in all aspects including all
materials labour,finishing etc complete
1838 Accoustic 51.13 Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof As directed by One Square 1450 435
fibres of approved make along with 5mm underlay as per Architectural & Acoustical Engineer-in-charge Metre
Design & Instructions & Complete in all aspects including all materials labour,finishing
etc complete
1839 Accoustic 51.14 Providing & Fixing in position, 1000 mm wide Auto-glow Aluminium extruded strips on As directed by One Number 1410 420
auditorium steps as per Design & Instructions & Complete in all aspects. Make Piccolo or Engineer-in-charge
Nexus
1840 Accoustic 51.15 Providing & Fixing in position, 12mm wp Ply wood & 1.5mm laminate panels above the As directed by One Square 3170 950
fabricated frame on one side , as per Architectural & Acoustical Design & Instructions & Engineer-in-charge Metre
Complete in all aspects. including all materials labour,finishing etc complete
1841 Accoustic 51.16 Providing & Fixing in position, MS fabrication work using angles, sqr tubes, c channels As directed by One Kilogram 85 25
etc for various partition frame as per Design & Instructions & Complete in all aspects . Engineer-in-charge
including all materials labour,finishing etc complete
1842 Accoustic 51.17 Providing & Fixing in position, Under Deck insulation for metal deck using 1000 Gsm As directed by One Square 740 220
synthetic wool with fixed to deck using adhesive and chicken mesh. Engineer-in-charge Metre
1843 Accoustic 51.18 Providing & fixing in position, heavy duty fully upholstered Auditorium chairs 520 mm c As directed by One Number 6000 1800
to c tip-up type. Height of back should be less than 1030 mm with plastic protective cover Engineer-in-charge
on back and bottom having teak wood handles. Back to back distance is 1000mm. The
auditorium chairs should be of following specifications 1. Powder Coated Heavy duty
MS Stand. 2. Individually moulded , ergonomically designed seat and back cushions.
3.Moulded Polyurethane Foam cushion. PU foam density 48 – 52
Kilograms/cu.mtr 4. Moulded Polyurethane Foam manufactured in certified ISO 9001
facility to ensure consistency in density for longevity .5.Upholstered in Foam laminated
stretch sandwich Fabric for clean finish and soft comfortable feel as per the colour &
pattern selected by the client. 6.Seat and Back should have moulded synthetic protective
cover. 7. Wooden or PU armrest 65mm x 20mm - 330mm long . 8.Mounted using
Anchor fasteners.
Page 354
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1844 Accoustic 51.19 Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round As directed by One Square 2152 645
Aluminium channel with Blackout fabric & telting with chain (Ball) system with all Engineer-in-charge Metre
necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge
prior execution of work)
1845 Accoustic 51.20 Providing and Fixing Vertical Blinds of approved Make and shade of 100mm regular As directed by One Square 1025 300
fabric with powder coated aluminium channel with telting PVC chain & bottom weight Engineer-in-charge Metre
plate with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer
In-charge prior execution of work)
1846 Furniture 51.21 Executive's Table @ 1800Lx900Dx750HT As directed by One Number 17231 0
Providing & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END to be made Engineer-in-charge
of Membrane finish with soft water fall edges & curved panel & Decorated Anodized
section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with
PVC edge band as per drawing
1847 Furniture 51.22 Pedestal Unit @ 420Lx450Dx650HT As directed by One Number 9004 0
Providing & Fixing of PEDESTAL @ 420Lx450Dx650HT :- To be made out of Engineer-in-charge
Complete Membrane consist of three Drawers as per drawing.
1848 Furniture 51.23 Credestal @ 1200Lx450Lx650HT As directed by One Number 17498 0
Providing & Fixing of LOW HEIGHT CREDESTAL @ 1200L X 450D X 650H :- To be Engineer-in-charge
made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between )as
per drawing.
1849 Furniture 51.24 Executive Table @ 2250Lx2100Dx750HT including Low Height Credestal @ As directed by One Number 42635 0
1200Lx450Dx650HT Providing & Fixing of Table @ 2250Lx2100Dx750HT TOP & Engineer-in-charge
GABLE END to be made of Membrane finish with soft water fall edges & curved panel
& Decorated Anodized section MODESTY PANEL to be made of 18 mm thick
Prelaminated particle board with PVC edge band. INCLUDING CREDESTAL @ 1200L
X 450D X 650H :- To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer
Pedestal in between ) as per drawing.
Page 355
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1850 Furniture 51.25 Medium Height Partition @ 1800/1200HT As directed by Running meter 7552 0
TILE BASED PARTITION SYSTEM:- Tile based Aluminum partition system of Engineer-in-charge
1800/1200 mm ht. made of 60mm thk aluminum frames having two separate race ways for
laying electrical & computer wiring. The wire management shall be through to the race
way to be fitted at bottom of partition and other immediately below of work top with hook
on type raceway cover for easy access of wires. Frames to be joined by aluminum
connectors with M6 x 16 pan-head machin screw and washer with aluminum post cover.
Post cover of snap on fashion to be connected on aluminum connectors. All visible
aluminium to be in anodized finish. The top/ exposed sides of the frame and posts should
be covered with horizontal/ Vertical trim and caps made of Aluminum in anodized finish
in order to enhance its look.Upper tiles of partition to be in Soft Board or Marker tile of
9mm. thk., and prelaminated partical board lower tiles in laminate finish of 9mm. thk. on
both the sides.
1851 Furniture 51.26 Free Standing Table @ 1500Lx600Dx750HT As directed by One Number 16893 0
Providing and fixing Table of Size 1500 x 600 x 750 mm. Top: made from 25 mm Engineer-in-charge
Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands
glued by hot melt glue applied by auto edge banding machine.
Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made
from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC
edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD
TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU
TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT
having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and
body are complete metal with powder coat finish, facia in 18 mm prelaminated particle
board,
1852 Furniture 51.27 Free Standing Table @ 1350Lx600Dx750HT As directed by One Number 16411 0
Providing and fixing Table of Size 1350 x 600 x 750 mm. Top: made from 25 mm Engineer-in-charge
Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands
glued by hot melt glue applied by auto edge banding machine.
Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made
from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC
edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD
TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU
TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT
having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and
body are complete metal with powder coat finish, facia in 18 mm prelaminated particle
board,
Page 356
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1853 Furniture 51.28 Free Standing Table @ 1200Lx600Dx750HT As directed by One Number 14436 0
Providing and fixing Table of Size 1200 x 600 x 750 mm. Top: made from 25 mm Engineer-in-charge
Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands
glued by hot melt glue applied by auto edge banding machine.
Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made
from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC
edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD
TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU
TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT
having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and
body are complete metal with powder coat finish, facia in 18 mm prelaminated particle
board,
1854 Furniture 51.29 Library Area Table @ 1350Lx750Dx750HT As directed by One Number 10897 0
Providing & Fixing of FREE STANDING TABLE @ 1350Lx750Dx 750HT:- TOP to be Engineer-in-charge
made of 25 mm thick Prelaminated particle board with PVC edge band, BENT LEG to be
CHROME FINISH as per drawing.
1855 Furniture 51.30 Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT As directed by One Number 15767 0
Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT, Engineer-in-charge
Curvilinear Table Top @ 1500/1500Lx600/600D :- TOP to be made of 25 mm thick
Prelaminated particle board with PVC edge band, GABLE END to be made of 25 mm
thick Prelaminated particle board with PVC edge band, KEYBOARD TRAY (
WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :-
Metal Powder Coated - Black Color, along with 3 DRAWER PEDESTAL UNIT having
overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are
complete metal with powder coat finish, facia in 18 mm prelaminated particle board,
1856 Furniture 51.31 Conference Table @ 3600Lx1400Dx750HT As directed by One Number 99105 0
Providing & Fixing of Main Table @ 3600Lx1400Dx750HT - made up of 18+18mm Engineer-in-charge
Thick MDF top with PVC Membrane finish and waterfall edge profile. Aluminium
Anodizied finish beeding of 4mm thich is running all over the table top edge. Gable ends
is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated
MDF with batton structure. Gable ends should be hollow from inside for the provision of
passing electrical and Data wiring. , MODESTY PANEL:- to be made of 18 mm thick
Prelaminated particle board with PVC edge band Access Flap:- For Wire manager 2 Nos.
Page 357
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1857 Furniture 51.32 Conference Table @ 1800 x 900 x 750 mm Ht. As directed by One Number 21108 0
Providing & Fixing of Main Table @ 1800Lx900Dx750HT - made up of 18+18mm Thick Engineer-in-charge
MDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied
finish beeding of 4mm thich is running all over the table top edge. Gable ends is
Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated
MDF with batton structure. Gable ends should be hollow from inside for the provision of
passing electrical and Data wiring. , MODESTY PANEL:- to be made of 18 mm thick
Prelaminated particle board with PVC edge band Access Flap:- For Wire manager 1 Nos.
1858 Furniture 51.33 12 Seater Reading Table for Library @ 3600Lx1200Dx750HT As directed by One Number 29536 0
Providing and Fixing 12 Seater Reading Table for Liberary @ 3600Lx1200Dx750HT Engineer-in-charge
Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm.
Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.
Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2
mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.
Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are
covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding
machine.
1859 Furniture 51.34 3 DRAWER PEDESTAL UNIT @ 392L x 450D x 680Ht. mm. As directed by One Number 8108 0
3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with Engineer-in-charge
central lock and key. 3 Drawers and body are complete metal with powder coat finish,
facia in 18 mm prelaminated particle board.
1860 Furniture 51.35 Low Height Openable Storage @ 900Lx450x750HT As directed by One Number 12646 0
Providing and fixing Openable Steel Storage of 900 x 450 x 750Ht, with 2 adjustable Engineer-in-charge
shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2
Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage
in powder coated finish with 60 to 80 microns. with 25 mm. thk additional Top on top of
storage as as per drawing
1861 Furniture 51.36 Medium Height Steel Storage @ 750Lx450Dx1200HT As directed by One Number 15452 0
Providing and fixing Openable Steel Storage of 750 x 450 x 1200Ht, with 2 adjustable Engineer-in-charge
shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2
Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage
in powder coated finish with 60 to 80 microns. with 25 mm. thk. as per drawing.
Page 358
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1862 Furniture 51.37 Full Height Steel Storage @ 750Lx450Dx2100HT As directed by One Number 18925 0
Providing and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable Engineer-in-charge
shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4
Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage
in powder coated finish with 60 to 80 microns as as per drawing.
1863 Furniture 51.38 Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. As directed by One Number 43427 0
Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. Engineer-in-charge
with 12 Compartments , Complete body & shutter made of CRCA Sheet with powder
coated finish as per approved color.
1864 Furniture 51.39 Book Case with Glass Shutter @ 825Lx300Dx1650HT As directed by One Number 26727 0
Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be Engineer-in-charge
made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA
with glass pannel in Powder coating finish as per drawing.
1865 Furniture 51.40 Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, As directed by One Number 17371 0
Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base Engineer-in-charge
with Leatherite Upholstery
1866 Furniture 51.41 Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH As directed by One Number 15474 0
MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER Engineer-in-charge
WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS
GASLIFT FOR HEIGHT ADJUSTMENT.
1867 Furniture 51.42 Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , As directed by One Number 9563 0
Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery Engineer-in-charge
1868 Furniture 51.43 Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift As directed by One Number 6520 0
for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery Engineer-in-charge
1869 Furniture 51.44 Public Seating Chair. - 3 Seater As directed by One Number 18056 0
Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Engineer-in-charge
Crome finish and seates in silver powder coating finish.
Page 359
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1870 Furniture 51.45 Double Faced Mobile Unit for Compactor 2150mmH x 2745mmW x 900mmD As directed by One Number 135808 0
Providing and fixing Double Faced Mobile Unit for Compactor 2150mmH x 2745mmW x Engineer-in-charge
900mmD - BASE FRAME : Base Frame shall be fabricated in channel Type from
minimum 2.5 mm thick MS Sheet Size of Channel 25mm x 100mm x 45mm. GUIDE
RAILS : The guide rails shall be made out of 28mm Bright bar placed on 1.2 mm thick
M.S. Plate which will be above the floor and are as per the international standard of
safety. SUPER STRUCTURE : Super structure of the Mobile storage system will consist
of knock down type panels. All the components such as shelves, front panel, end panel,
vertical rear panel, central partition etc. Will act as an integral member of the Unit.
SHELVES : Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10 folds each
will be provided each designed to carry a U.D.L. of 70 Kilograms. VERTICAL PANEL :
Vertical panel consists of the front, Centre & rear panel shall be made out of 20SWG thick
C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVE
COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the
entire drive mechanism. CENTRE PARTITION : The Centre partition will comprise of a
full C.R.C.A. prime quality Mild Steel 22SWG Sheet. LOCKING : System will be
provided with individual rack locking as well as centralised locking arrangement on the
last unit when all units are brought together, central lock when operated gets locked with
the floor & does not allow access to the units. DRIVE MECHANISM : Driving
Mechanism will be provided externally supported on special grade anti-friction bearing to
have smooth & effortless movement. Entire mechanism or gear & sprockets shall be
incorporated within the front panel provided in the front of the unit within an area of
1000mm x 200mm x 60mm. DRIVING WHEEL : Fully Powder Coated three pronged
drive wheel for better torque & free movement of the rack over the guide rail. INDEXING
ARRANGEMENT : Acrylic card holders provided on the front panel for easy
identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70
microns).
Page 360
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1871 Furniture 51.46 Single Faced Mobile Unit for Compactor 2150mmH x 2745mmW x 457mmD As directed by One Number 99768 0
Providing and fixing Single Faced Mobile Unit for Compactor 2150mmH x 2745mmW x Engineer-in-charge
457mmD - BASE FRAME : Base Frame shall be fabricated in channel Type from
minimum 2.5 mm thick MS Sheet Size of Channel 25mm x 100mm x 45mm. GUIDE
RAILS : The guide rails shall be made out of 28mm Bright bar placed on 1.2 mm thick
M.S. Plate which will be above the floor and are as per the international standard of
safety. SUPER STRUCTURE : Super structure of the Mobile storage system will consist
of knock down type panels. All the components such as shelves, front panel, end panel,
vertical rear panel, central partition etc. Will act as an integral member of the Unit.
SHELVES : Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10 folds each
will be provided each designed to carry a U.D.L. of 70 Kilograms. VERTICAL PANEL :
Vertical panel consists of the front, Centre & rear panel shall be made out of 20SWG thick
C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVE
COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the
entire drive mechanism. CENTRE PARTITION : The Centre partition will comprise of a
full C.R.C.A. prime quality Mild Steel 22SWG Sheet. LOCKING : System will be
provided with individual rack locking as well as centralised locking arrangement on the
last unit when all units are brought together, central lock when operated gets locked with
the floor & does not allow access to the units. DRIVE MECHANISM : Driving
Mechanism will be provided externally supported on special grade anti-friction bearing to
have smooth & effortless movement. Entire mechanism or gear & sprockets shall be
incorporated within the front panel provided in the front of the unit within an area of
1000mm x 200mm x 60mm. DRIVING WHEEL : Fully Powder Coated three pronged
drive wheel for better torque & free movement of the rack over the guide rail. INDEXING
ARRANGEMENT : Acrylic card holders provided on the front panel for easy
identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70
microns).
Page 361
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1872 Furniture 51.47 Single Faced Fixed Unit for Compactor 2150mmH x 2745mmW x 457mmD As directed by One Number 64014 0
Providing and fixing Single Faced Fixed Unit for Compactor 2150mmH x 2745mmW x Engineer-in-charge
457mmD - BASE FRAME : Base Frame shall be fabricated in channel Type from
minimum 2.5 mm thick MS Sheet Size of Channel 25mm x 100mm x 45mm. GUIDE
RAILS : The guide rails shall be made out of 28mm Bright bar placed on 1.2 mm thick
M.S. Plate which will be above the floor and are as per the international standard of
safety. SUPER STRUCTURE : Super structure of the Mobile storage system will consist
of knock down type panels. All the components such as shelves, front panel, end panel,
vertical rear panel, central partition etc. Will act as an integral member of the Unit.
SHELVES : Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10 folds each
will be provided each designed to carry a U.D.L. of 70 Kilograms. VERTICAL PANEL :
Vertical panel consists of the front, Centre & rear panel shall be made out of 20SWG thick
C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVE
COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the
entire drive mechanism. CENTRE PARTITION : The Centre partition will comprise of a
full C.R.C.A. prime quality Mild Steel 22SWG Sheet. LOCKING : System will be
provided with individual rack locking as well as centralised locking arrangement on the
last unit when all units are brought together, central lock when operated gets locked with
the floor & does not allow access to the units. DRIVE MECHANISM : Driving
Mechanism will be provided externally supported on special grade anti-friction bearing to
have smooth & effortless movement. Entire mechanism or gear & sprockets shall be
incorporated within the front panel provided in the front of the unit within an area of
1000mm x 200mm x 60mm. DRIVING WHEEL : Fully Powder Coated three pronged
drive wheel for better torque & free movement of the rack over the guide rail. INDEXING
ARRANGEMENT : Acrylic card holders provided on the front panel for easy
identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70
microns).
Page 362
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1873 Furniture 51.48 Double Faced Mobile Unit for Compactor 2150mmH x 1830mmW x 900mmD As directed by One Number 95652 0
Providing and fixing Double Faced Mobile Unit for Compactor 2150mmH x 1830mmW x Engineer-in-charge
900mmD - BASE FRAME : Base Frame shall be fabricated in channel Type from
minimum 2.5 mm thick MS Sheet Size of Channel 25mm x 100mm x 45mm. GUIDE
RAILS : The guide rails shall be made out of 28mm Bright bar placed on 1.2 mm thick
M.S. Plate which will be above the floor and are as per the international standard of
safety. SUPER STRUCTURE : Super structure of the Mobile storage system will consist
of knock down type panels. All the components such as shelves, front panel, end panel,
vertical rear panel, central partition etc. Will act as an integral member of the Unit.
SHELVES : Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10 folds each
will be provided each designed to carry a U.D.L. of 70 Kilograms. VERTICAL PANEL :
Vertical panel consists of the front, Centre & rear panel shall be made out of 20SWG thick
C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVE
COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the
entire drive mechanism. CENTRE PARTITION : The Centre partition will comprise of a
full C.R.C.A. prime quality Mild Steel 22SWG Sheet. LOCKING : System will be
provided with individual rack locking as well as centralised locking arrangement on the
last unit when all units are brought together, central lock when operated gets locked with
the floor & does not allow access to the units. DRIVE MECHANISM : Driving
Mechanism will be provided externally supported on special grade anti-friction bearing to
have smooth & effortless movement. Entire mechanism or gear & sprockets shall be
incorporated within the front panel provided in the front of the unit within an area of
1000mm x 200mm x 60mm. DRIVING WHEEL : Fully Powder Coated three pronged
drive wheel for better torque & free movement of the rack over the guide rail. INDEXING
ARRANGEMENT : Acrylic card holders provided on the front panel for easy
identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70
microns).
Page 363
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1874 Furniture 51.49 Single Faced Mobile Unit for Compactor 2150mmH x 1830mmW x 457mmD As directed by One Number 69900 0
Providing and fixing Single Faced Mobile Unit for Compactor 2150mmH x 1830mmW x Engineer-in-charge
457mmD - BASE FRAME : Base Frame shall be fabricated in channel Type from
minimum 2.5 mm thick MS Sheet Size of Channel 25mm x 100mm x 45mm. GUIDE
RAILS : The guide rails shall be made out of 28mm Bright bar placed on 1.2 mm thick
M.S. Plate which will be above the floor and are as per the international standard of
safety. SUPER STRUCTURE : Super structure of the Mobile storage system will consist
of knock down type panels. All the components such as shelves, front panel, end panel,
vertical rear panel, central partition etc. Will act as an integral member of the Unit.
SHELVES : Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10 folds each
will be provided each designed to carry a U.D.L. of 70 Kilograms. VERTICAL PANEL :
Vertical panel consists of the front, Centre & rear panel shall be made out of 20SWG thick
C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVE
COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the
entire drive mechanism. CENTRE PARTITION : The Centre partition will comprise of a
full C.R.C.A. prime quality Mild Steel 22SWG Sheet. LOCKING : System will be
provided with individual rack locking as well as centralised locking arrangement on the
last unit when all units are brought together, central lock when operated gets locked with
the floor & does not allow access to the units. DRIVE MECHANISM : Driving
Mechanism will be provided externally supported on special grade anti-friction bearing to
have smooth & effortless movement. Entire mechanism or gear & sprockets shall be
incorporated within the front panel provided in the front of the unit within an area of
1000mm x 200mm x 60mm. DRIVING WHEEL : Fully Powder Coated three pronged
drive wheel for better torque & free movement of the rack over the guide rail. INDEXING
ARRANGEMENT : Acrylic card holders provided on the front panel for easy
identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70
microns).
Page 364
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1875 Furniture 51.50 Single Faced Fixed Unit for Compactor 2150mmH x 1830mmW x 457mmD As directed by One Number 44223 0
Providing and fixing Single Faced Fixed Unit for Compactor 2150mmH x 1830mmW x Engineer-in-charge
457mmD - BASE FRAME : Base Frame shall be fabricated in channel Type from
minimum 2.5 mm thick MS Sheet Size of Channel 25mm x 100mm x 45mm. GUIDE
RAILS : The guide rails shall be made out of 28mm Bright bar placed on 1.2 mm thick
M.S. Plate which will be above the floor and are as per the international standard of
safety. SUPER STRUCTURE : Super structure of the Mobile storage system will consist
of knock down type panels. All the components such as shelves, front panel, end panel,
vertical rear panel, central partition etc. Will act as an integral member of the Unit.
SHELVES : Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10 folds each
will be provided each designed to carry a U.D.L. of 70 Kilograms. VERTICAL PANEL :
Vertical panel consists of the front, Centre & rear panel shall be made out of 20SWG thick
C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVE
COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the
entire drive mechanism. CENTRE PARTITION : The Centre partition will comprise of a
full C.R.C.A. prime quality Mild Steel 22SWG Sheet. LOCKING : System will be
provided with individual rack locking as well as centralised locking arrangement on the
last unit when all units are brought together, central lock when operated gets locked with
the floor & does not allow access to the units. DRIVE MECHANISM : Driving
Mechanism will be provided externally supported on special grade anti-friction bearing to
have smooth & effortless movement. Entire mechanism or gear & sprockets shall be
incorporated within the front panel provided in the front of the unit within an area of
1000mm x 200mm x 60mm. DRIVING WHEEL : Fully Powder Coated three pronged
drive wheel for better torque & free movement of the rack over the guide rail. INDEXING
ARRANGEMENT : Acrylic card holders provided on the front panel for easy
identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70
microns).
1876 Furniture 51.51 Stool for Lab and Class-IV As directed by One Number 2617 0
Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45 MM Outer dimension Engineer-in-charge
MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch
collar, Height adjustment via a screw. as per design and drawing and instructions of
Engineer in charge.
1877 Furniture 51.52 Alluminium foldable ladder for store As directed by One Number 3961 0
Providing & Fixing Foldable Alluminum Ladder 1500 mm. Ht. Engineer-in-charge
Page 365
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1878 Furniture 51.53 Sofa Set 3+1+1 As directed by One Number 39612 0
Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: Engineer-in-charge
182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66
(Kilogram) Seating Capacity: Five Seat
1879 Furniture 51.54 Tea Table 900mm X 750mm X 450mm for m.s. ante chamber As directed by One Number 11123 0
Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Engineer-in-charge
Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick
Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik
Veneer Or 1 Mm Thik Mica Etc.
1880 Furniture 51.55 Single Bed @ 2025LX 1000DX 650H As directed by One Number 19367 0
Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Engineer-in-charge
Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS
with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two
levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to
join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are
provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm
made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg
attached to it to transfer the load to the ground and add to the strength and stability of the
complete structure. This leg is also made of Square tube of size 25 x 25mm made out of
MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment
process and should be powder coated to the thickness of minimum 50 Microns DFT.Side
Panel: - The side panels are made up of 18mm thick Prelam Particle Board with both side
decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding.
The overall width of the side panel is 150mm. The side panels have 18mm thick prelam
particle board Baton running for required length to add rigidity to the structure. Head
Board :- The head board is made up of 18mm thick Prelam Particle Board with both side
decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding.
The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is
made up of 18mm thick Prelam Particle Board with both side decorative laminate. All
exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be
considered as 1000 x 450mm.
Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side
White laminate.
Page 366
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1881 Furniture 51.56 Dressing Table @400LX 400DX 1800H As directed by One Number 17352 0
Providing & Fixing Dressing Table of size 400LX 400DX 1800H.The Dressing table unit Engineer-in-charge
is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All
exposed edges are sealed with 2mm thick PVC edge Banding. The unit has one drawer
and one shelf. The dressing table has a mirror of 4mm thick pasted on 18mm thick prelm
particle board attached to the base unit. The mirror size considered is 1155 x 360 x 4(t).
The mirror has been pasted using high quality 3M sticker.
1882 Furniture 51.57 Wardrobe with Mirror @ 900LX 600DX 1965H As directed by One Number 40389 0
Providing and Fixing Wardrobe with Mirror of size 900LX 600DX 1965H The wardrobe Engineer-in-charge
side panels and doors are made up of 18mm thick Prelam Particle Board with both side
decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding.
The shelves are made of 18mm thick Prelam Particle Board with decorative laminate on
both sides. The top is made of 36mm prelam particle board with decorative laminate on
both sides. (18mm Prelam Particle board and 18mm batons on all sides to achieve 36mm
overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge
Banding. The top most part of the wardrobe has an aluminum hanger rod of EBCO make.
One drawer of size 400(W) x 150(H) x 450 (D) made of 18mm thick prelam Particle
Board has been considered. The drawer will have a multipurpose lock of EBCO premium
make. The wardrobe handles are Satin SS finish of 160mm pitch. The wardrobe has a
multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary
good quality hardwares have been considered as required.
1883 Furniture 51.58 Bed Side Table @ 400LX 400DX 415H As directed by One Number 6401 0
Providing and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is Engineer-in-charge
made up of 18mm thick Prelam Particle Board with both side decorative laminate. All
exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one
drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both
side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding
Page 367
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1885 Doors and 51.60 Solid Core Flush door Single leaf As directed by One Square 2750 0
windows Providing and fixing factory made solid core flush door in single leaf 35 mm thick, Engineer-in-charge Metre
decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 -
1962 (Revised) with approved face veneers on both faces with/without glazing and
venetians in the positions shown on the drawings or as directed, all necessary beads,
moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing
with french-polish/ waxing complete. (without door frame).(Sample to be got approved
from Ex.Engineer before use) Commercial Hard Wood shutter
1886 Doors and 51.61 BDR Solid Core Flush door Double leaf As directed by One Square 3100 0
windows Providing and fixing factory made solid core flush door shutters in double leaves 35mm Engineer-in-charge Metre
thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202
– 1966 (Revised) including approved face veneers on both sides, without glazing and
venetians including mat finish stainless steel fixtures and fastening, stoppers and
finishing with french polishing etc. (Excluding door frame)(Sample to be got approved
from Ex. Engineer before use) Commercial Hard Wood shutter
1887 Plastering 51.62 BDL Providing Silica plaster plaster externally in two coats in all positions including base coat As directed by One Square 560 331
of 8 to 10 mm thick curing the same for not less than two days and keeping the surface of Engineer-in-charge Metre
base coat rough to receive the final coat treatment 5 to 7 mm thick .finishing the surface
by taking out grains and curing for 8 to 10 daysscaffolding etc complete.(The silica plast
material shall contain 53 grade OPC cement with pozzolanic materials .size of agreegates
shall be of 3 mm having 1:3 proportion with cement.
Page 368
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1888 PWD persons 51.63 BDV Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted As directed by One Number 70780 21000
white vitreous china water Closet including 6 litre capacity white vitreous china flushing Engineer-in-charge
Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm
and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all
including cutting and making good the walls and floors wherever required ,seat cover,
cistern & wash basin fittings,nuts, bolts and gasket etc complete as per the direction of
Engineer-In-charge.
1889 PWD persons 51.64 BDT Providing and fixing ISI marked double swing flush door shutters conforming to IS :2202 As directed by One Square 12500 3750
(Part I) Non-decorative type, core of block board construction with frame of 1st class hard Engineer-in-charge Metre
wood and well matched teak 3 ply veneering with vertical grains or cross bands and face
veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel L-
hinges with necessary screws Fittings & Fixtures per leaf
SS kick plates on both sides of the door of 300mm height
Heavy Duty satin finish butt SS Hinges (100mm x 75mm x 3mm in size) -4 nos. SS
finished lever handle with mortise lock- 1 One Number
Floor spring- 1 One Number 100mm x 100mm safety glass at the specified location
1890 PWD persons 51.65 Providing and applying blue and white coloured thermoplastic road marking paints for As directed by One Number 1575 470
marking a 3ft x 3 ft universal accessibility symbol within the parking bay as paer the Engineer-in-charge
drawings and up to the satisfaction of the engineer in charge.
1891 PWD persons 51.66 Acrylic tactile audio map As directed by One Number 20790 6237
Design, supply, fabrication and fixing of acrylic, non glare, tactile audio pictorial building Engineer-in-charge
layout as per the approved size, design and make, having 6mm thick acrylic non glare
base plate of the approved colour and non glare acrylic cut out symbols and upper case
Sans Serif letters of 12mm height, raised 3mm above base plate and Grade 2/ Grade 1
Braille to be integral with the sign face and be raised 0.5mm above base plate. The map to
be installed at the specified location as per accessibility standards, shall be oriented to the
position of the viewer and to be installed at a height of 800 mm from the finished ground/
floor level and using the necessary hardware specified by the manufacturer and to be
installed up to the satisfaction of the engineer in charge
Page 369
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1892 PWD persons 51.67 RD Directional signage As directed by One Number 1633 490
Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots) directional Engineer-in-charge
signboards of size 6" x 9" designed as per accessibility standards and having 4mm thick
acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut
out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent
word written in Hindi with Devnagri non glare acrylic letters of height 15mm raised not
less than 0.8mm above base plate and having a non glare acrylic cut arrow pointing in the
required direction. Each signboard to be fixed as per manufacturers specifications on the
wall at the approved location and at a height of 1200mm from FFL and as per the
directions by the engineer in charge.
1893 PWD persons 51.68 Floor Directories Providing and fixing acrylic multilingual Braille (raised dots)ADA As directed by One Number 17418 5225
compliant modular floor directories system on all floors of size1.5' x 2' , showing the floor Engineer-in-charge
plan and the list of rooms on that floor, to be installed on each floor near the staircase,
designed as per standards and having 4mm thick blue acrylic base plate with Upper Case
San Serif words and symbols made of white acrylic non glare cut out letters of height
20mm raised not less than 0.8mm above base plate and the equivalent word/s written in
Hindi with Devnagri non glare imported acrylic letters of height 15mm raised not less
than 0.8mm above base plate. Grade 2/ Grade 1 Braille to be integral with the sign face
and be raised 0.5mm above base plate. Each directory to be fixed as per manufacturers
specifications on the wall at the approved location at a height of 1200mm from FFL and
as per the directions by the engineer in charge.
1894 PWD persons 51.69 Providing an ADA compliant Disability Service Desk having a lowered portion (800mm As directed by One Number 22000 6600
from FFL) and leg space of 450 mm, having the approved design and of the approved Engineer-in-charge
make as per manufacturers specifications
1895 PWD persons 51.70 Providing and fixing SS-304 studs having 35mm dia. of the approved brand and make As directed by One Number 59 17
inside the building on all floors in corridors, lobbies level differences etc. as per Engineer-in-charge
accessibility standards and as per the installation instructions prescribed by the
manufacturer, using the necessary adhesive including finishing work up to the satisfaction
of the engineer in charge complete.
1896 PWD persons 51.71 Providing and fixing SS-304 strips of size 280mm x 35mm of the approved brand and As directed by One Number 293 87
make inside the building on all floors in corridors, lobbies level differences etc. as per Engineer-in-charge
accessibility standards and as per the installation instructions prescribed by the
manufacturer, using the necessary adhesive including finishing work up to the satisfaction
of the engineer in charge complete.
Page 370
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1897 PWD persons 51.72 Providing and fixing Braille indicators for handrails of the approved design and make As directed by One Number 1500 450
having Braille dots raised 0.5mm above base plate, to be installed at the specified Engineer-in-charge
locations as per the directions of the engineer in charge
1898 PWD persons 51.73 Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, As directed by One Kilogram 694 205
plates etc. including welding grinding, buffing, polishing and making curvature (wherever Engineer-in-charge
required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c
fixing the railing with necessary accessories and stainless steel dash fasteners, stainless
steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with
suitable arrangement as per approval of engineer in charge (for payment purpose, only the
weight of the stainless steel members shall be considered excluding fixing accessories
such as nut bolts, fasteners etc.). 50mm dia. pipe, 1.5mm thickness and weight
1.92Kilogram/ r. metre
1899 PWD persons 51.74 ADA compliant modular Multilingual and tactile Emergency evacuation map of each floor As directed by One Number 19750 5925
indicating the current position of the viewer saying "YOU ARE HERE" of 15mm height Engineer-in-charge
letters in red with white bacKilogramround, indicating the emergency exits, locations of
fire extinguishers etc. Signs shall have a solid header with the text “EVACUATION
PLAN” in contrasting uppercase letters no less than 3/4" in height. The size of the board
shall be 2ft x 2ft and shall be installed at a height of 1200mm from FFL and shall be
oriented to the position of the viewer as per the direction of the site engineer
1900 PWD persons 51.75 Fire exit and floor identification signage as per manufacturer's specifications, ADA As directed by One Number 7500 2250
compliant and modular system Engineer-in-charge
1901 PWD persons 51.76 Supplying and installing of in position the signages " FIRE ORDER" it should contain the As directed by One Number 19780 5934
following matter on 3mm thick "Opaque" PVC foam board of computerized cut, PVC Engineer-in-charge
Non-reflective self adhesive vinyle painted foam board of 3' x 4'.Product to be ADA
compliant and modular system.
1902 PWD persons 51.77 Providing an emergency evacuation chair of the approved design, weight and loading As directed by One Number 73500 22050
capacity Engineer-in-charge
1903 PWD persons 51.78 Providing and fixing the reader of the approved brand and make as per the manufacturers As directed by One Number 23100 6930
specifications and as per the directions of the engineer in charge Engineer-in-charge
1904 PWD persons 51.79 Providing and fixing the transmitter of the approved brand and make on each floor as per As directed by One Number 3675 1100
the manufacturers specifications and as per the directions of the engineer in charge Engineer-in-charge
1905 PWD persons 51.80 Providing and fixing SS Braille buttons in the elevator of the approved brand and make to As directed by One Number 189 56
be installed using the specified adhesive and as per the instructions given by the Engineer-in-charge
manufacturer
Page 371
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1906 PWD persons 51.81 Providing and fixing of high intensity reflective conspicuity tape 25 to 50mm width, on As directed by One Running 160 48
edges of treads in staircase including, cutting, pasting etc. of make 3M or equivalent brand Engineer-in-charge Metre
as per the direction of engineer in charge
1907 PWD persons 51.82 Providing a folding wheelchair of Pioneer Surgicals Brand, model One Number PS 809/ As directed by One Number 8950 2685
equivalent make as per the directions of the engineer in charge. Engineer-in-charge
1908 PWD persons 51.83 Design, supply, fabrication and fixing of SS, non glare Signage board (2 ft. x 2 ft.- 1 One As directed by One Number 23100 6930
Number) for the accessible parking, as per the approved design and make, having 1.2mm Engineer-in-charge
thick SS non glare base plate and Grade 2/ Grade 1 Braille (raised dots)to be etched/
engraved and be raised 0.5mm above base plate and Upper Case San Serif words and
Universal Accessibility Symbol to be etched/ engraved and signage to be installed at a
height of 2100mm from the ground level using a post of MS hollow square section (50mm
x 50mm) as per the installation procedure specified by the manufacturer and as per
accessibility standards and up to the satisfaction of the engineer in charge.
1909 PWD persons 51.84 Design, supply, fabrication and fixing of SS, non glare multilingual Braille (raised dots) As directed by One Number 5969 1791
entrance signage (size 1 ft x 1 ft) as per the approved design and make,indicating the Engineer-in-charge
name of the building. Having 1.2mm thick SS non glare blue coloured base plate with the
'Universal Accessibility Symbol' and Upper case Sans Serif words of height 15mm
engraved on it along with the equivalent word/ s written in Hindi using Devnagri script of
height 15mm in white colour. Grade 2/ Grade 1 Braille to be etched/ engraved and be
raised 0.5mm above base plate.The signage to be installed at the specified location on the
compound wall near the site entrance gate installed at a height of 1200 mm from the
finished ground/ floor level, using the necessary hardware specified by the manufacturer
and to be installed up to the satisfaction of the engineer in charge.
1910 PWD persons 51.85 Providing and laying in place 300mm x 300mm x 16mm cement tactile directional and As directed by One Square 1550 465
warning tiles (for a person with visual impairment)of the approved brand and make and Engineer-in-charge Metre
specified colour for outdoor floors such as footpath, courtyard, multimodals location etc.
laid on 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) in all shapes and
patterns including grouting the joints with white cement with matching pigments etc.
complete as per direction of engineer in charge
1911 PWD persons 51.86 Providing and laying in place 300mm x 300mm x 9.8mm vitrified tactile warning and As directed by One Square 2200 660
directional tiles of the approved brand, make and colour inside the buildings at in all Engineer-in-charge Metre
corridors and lobbies, level differences etc. as per accessibility standards and as per the
installation instructions prescribed by the manufacturer including zarri making wherever
required and finishing including grouting the joints with white cement with matching
pigments etc. up to the satisfaction of the engineer in charge complete.
Page 372
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1912 PWD persons 51.87 Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots) signboards As directed by One Number 1633 490
of size 6"x 9" for room titles, designed as per the drawings issued and having 4mm thick Engineer-in-charge
blue acrylic base plate with Upper Case San Serif words made of white acrylic non glare
cut out letters of height 15mm raised not less than 0.8mm above base plate and the
equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height 15mm
raised not less than 0.8mm above base plate. Grade 2/ Grade 1 Braille to be integral with
the sign face and be raised 0.5mm above base plate.Each signboard to be fixed as per
manufacturers specifications on the wall adjoining the respective room door at a height of
1200mm from FFL and as per the directions by the engineer in charge.
1913 PWD persons 51.88 BDM Providing and fixing in place 300mm x 300mm x 3mm polyurethane stick on tactile As directed by One Number 3545 1064
directional tiles and warning tiles having beveled edges and of the approved brand, make Engineer-in-charge
and colour and conforming to ISO 23599: 2012 inside the building on all floors in
corridors, lobbies , level differences as per accessibility standards and to be installed as
per the installation instructions given by the manufacturer using butyl rubber adhesive
and the hardware specified by the manufacturer, as per the direction of the engineer in
charge complete.
1914 PWD persons 51.89 Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab As directed by One Number 19500 5850
bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight Engineer-in-charge
grab bars = 1 typical set) 27a) Swing grab bar (1 NOS) Providing a S.S. 304
SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm
of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L
SHAPED DISABLED GRAB BAR of IZE-600MM (H) X 600MM (D) and 32MM
DIA. and thickness mm of the approved brand and make. 27c) Straight grab bar (2 NOS)
Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of
the approved brand and make.
1915 PWD persons 51.90 Providing and Fixing Accessible Wayfinding and navigation signage systems - Providing As directed by One Number 85640 25692
and fixing in location as diected by Engineer in Charge, accessible modular wayfinding Engineer-in-charge
and navigational signage system comprising of ADA and Harmonised Guidelines
compliant sigange and wayfinding elements, in multilingual, tactile and braille format.
Sigange systems to be designed for entire building / complex under consideration
Page 373
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1916 Doors and 51.91 BDT Providing & fixing factory-made steel door of Single leaf External Embossed Wood finish As directed by One Square 6368 263
Windows type with a.) frame of size 100x58 mm conforming to IS : 4351-2003 , 1.2 mm thick pre Engineer-in-charge Metre
galvanized sheet with mitred and welded cones , frame stretches, hinge reinforcing plates ,
fixing plates and hardware mounting plates and Polyurethane foam infill b.) Shutter of
thickness 46mm made of 0.8 mm thick slip coated pre galvanized steel sheet on both sides
conforming to ASTM A527/ASTM A525, BS 2989 1994, IS 277 , Zinc coating 120 GSM
. Lock formed panels with internal stiffeners of 3mm thick made of galvanized sheet, 3
mm thick hinge reinforcing hardware mounting plates and lock protection with Honey-
comb craft paper infill of thickness 150 GSM of load bearing capacity 500 Kilogram/ One
Square Metre. c.) Finish: Powder coated surface finished with thermosetting polyurethane
paint of Aliphatic grade of thickness 60-micron d.) Accessories: Min 8 Anchor fastener of
HILTI make, min 3 SS Ball Bearing Butt Hinges of Dorset make, Dorset Mortise lock, SS
Tower bolt of 200 mm size, Eye hole, Door stopper complete.
1917 Doors and 51.92 BDT Providing & fixing factory-made steel door of Single leaf External Plain Wood finish type As directed by One Square 6080 263
Windows with a.) frame of size 100x58 mm conforming to IS : 4351-2003 , 1.2 mm thick pre Engineer-in-charge Metre
galvanized sheet with mitred and welded cones , frame stretches, hinge reinforcing plates ,
fixing plates and hardware mounting plates and Polyurethane foam infill b.) Shutter of
thickness 46mm made of 0.8 mm thick slip coated pre galvanized steel sheet on both sides
conforming to ASTM A527/ASTM A525, BS 2989 1994, IS 277 , Zinc coating 120 GSM
. Lock formed panels with internal stiffeners of 3mm thick made of galvanized sheet, 3
mm thick hinge reinforcing hardware mounting plates and lock protection with Honey-
comb craft paper infill of thickness 150 GSM of load bearing capacity 500 Kilogram/ One
Square Metre. c.) Finish: Powder coated surface finished with thermosetting polyurethane
paint of Aliphatic grade of thickness 60-micron d.) Accessories: Min 8 Anchor fastener of
HILTI make, min 3 SS Ball Bearing Butt Hinges of Dorset make, Dorset Mortise lock, SS
Tower bolt of 200 mm size, Eye hole, Door stopper complete.
Sizes up to 1200 x2439 mm
Page 374
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1918 Doors and 51.93 BDT Providing & fixing factory-made steel door of Single leaf External Plain Wood finish type As directed by One Square 5790 263
Windows with a.) frame of size 100x58 mm conforming to IS : 4351-2003 , 1.2 mm thick pre Engineer-in-charge Metre
galvanized sheet with mitred and welded cones , frame stretches, hinge reinforcing plates ,
fixing plates and hardware mounting plates and Polyurethane foam infill b.) Shutter of
thickness 46mm made of 0.8 mm thick slip coated pre galvanized steel sheet on both sides
conforming to ASTM A527/ASTM A525, BS 2989 1994, IS 277 , Zinc coating 120 GSM
. Lock formed panels with internal stiffeners of 3mm thick made of galvanized sheet, 3
mm thick hinge reinforcing hardware mounting plates and lock protection with Honey-
comb craft paper infill of thickness 150 GSM of load bearing capacity 500 Kilogram/ One
Square Metre. c.) Finish: Powder coated surface finished with thermosetting polyurethane
paint of Aliphatic grade of thickness 60-micron d.) Accessories: Min 8 Anchor fastener of
HILTI make, min 3 SS Ball Bearing Butt Hinges of Dorset make, Dorset Mortise lock, SS
Tower bolt of 200 mm size, Eye hole, Door stopper complete.
Sizes up to 1200 x2439 mm
1919 Doors and 51.94 BDT Providing & fixing factory-made steel door of Single leaf Internal Plain Wood finish type As directed by One Square 5509 263
Windows with a.) frame of size 100x58 mm conforming to IS : 4351-2003 , 1.2 mm thick pre Engineer-in-charge Metre
galvanized sheet with mitred and welded cones , frame stretches, hinge reinforcing plates ,
fixing plates and hardware mounting plates and Polyurethane foam infill b.) Shutter of
thickness 46mm made of 0.8 mm thick slip coated pre galvanized steel sheet on both sides
conforming to ASTM A527/ASTM A525, BS 2989 1994, IS 277 , Zinc coating 120 GSM
. Lock formed panels with internal stiffeners of 3mm thick made of galvanized sheet, 3
mm thick hinge reinforcing hardware mounting plates and lock protection with Honey-
comb craft paper infill of thickness 150 GSM of load bearing capacity 500 Kilogram/ One
Square Metre. c.) Finish: Powder coated surface finished with thermosetting polyurethane
paint of Aliphatic grade of thickness 60-micron d.) Accessories: Min 8 Anchor fastener of
HILTI make, min 3 SS Ball Bearing Butt Hinges of Dorset make, Dorset cylindrical lock,
SS Tower bolt of 200 mm size, Door stopper complete.
Page 375
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1920 Doors and 51.95 BDT Providing & fixing factory-made steel door of Single leaf Internal Plain Steel finish type As directed by One Square 5211 263
Windows with a.) frame of size 100x58 mm conforming to IS : 4351-2003 , 1.2 mm thick pre Engineer-in-charge Metre
galvanized sheet with mitred and welded cones , frame stretches, hinge reinforcing plates ,
fixing plates and hardware mounting plates and Polyurethane foam infill b.) Shutter of
thickness 46mm made of 0.8 mm thick slip coated pre galvanized steel sheet on both sides
conforming to ASTM A527/ASTM A525, BS 2989 1994, IS 277 , Zinc coating 120 GSM
. Lock formed panels with internal stiffeners of 3mm thick made of galvanized sheet, 3
mm thick hinge reinforcing hardware mounting plates and lock protection with Honey-
comb craft paper infill of thickness 150 GSM of load bearing capacity 500 Kilogram/ One
Square Metre. c.) Finish: Powder coated surface finished with thermosetting polyurethane
paint of Aliphatic grade of thickness 60-micron d.) Accessories: Min 8 Anchor fastener of
HILTI make, min 3 SS Ball Bearing Butt Hinges of Dorset make, Dorset cylindrical lock,
SS Tower bolt of 200 mm size, Door stopper complete.
1921 Doors and 51.96 BDT Providing & fixing factory-made Single leaf 2 hour fire rated door as per IS 3614 Part 2 As directed by One Square 7236 263
Windows & BS 476 Part 20 & 22, tested to UL 10 C and conforming to NFPA 80 , tested at NTL Engineer-in-charge Metre
/CBRI/ARAI of Plain Steel finish type with a.) Frame of size 143x58 mm and thickness of
1.6 mm thick skin pass galvanized iron sheet (Conform to IS 277 ) formed to single or
double rebate profile b.) Shutter of 46 mm thickness and constructed from 1.2 mm thick
skin pas galvanized iron sheet (Conform to IS 277) infill Rockwool / Mineral wool/
Honey comb craft paper c.) Vision glass of 5mm thick clear/wired glass Circular or
Rectangular d.) Finish : Primed with zinc phosphate stoving primer and finished with
Polyurethane aliphatic grade or epoxy paint as required of thickness 60 micron e.)
Accessories : Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges,
Mortise sash lock with lever handle, Mortise dead bolt , Mortise latch , Door closer and
Flush bolts complete.
Page 376
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1922 Doors and 51.97 BDT Providing & fixing factory-made Single leaf 2 hour fire rated door as per IS 3614 Part 2 As directed by One Square 8686 263
Windows & BS 476 Part 20 & 22, tested to UL 10 C and conforming to NFPA 80 , tested at NTL Engineer-in-charge Metre
/CBRI/ARAI of Plain Steel finish type with a.) Frame of size 143x58 mm and thickness of
1.6 mm thick skin pass galvanized iron sheet (Conform to IS 277 ) formed to single or
double rebate profile b.) Shutter of 46 mm thickness and constructed from 1.2 mm thick
skin pas galvanized iron sheet (Conform to IS 277) infill Rockwool / Mineral wool/
Honey comb craft paper c.) Vision glass of 5mm thick clear/wired glass Circular or
Rectangular d.) Finish : Primed with zinc phosphate stoving primer and finished with
Polyurethane aliphatic grade or epoxy paint as required of thickness 60 micron e.)
Accessories : Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges,
Mortise sash lock with lever handle, Mortise dead bolt , Mortise latch , Door closer , Panic
bar and external trim lock and Flush bolts complete.
1923 Doors and 51.98 BDT Providing & fixing factory-made Aluminum windows of aluminum alloy HE 9WP (6063 As directed by One Square 5471 385
Windows T5/T6), powder coating of jotun/AkzoNobel of 60 micron thickness a.) Glass: 5mm thick Engineer-in-charge Metre
clear float of Saint Gobain / Asahi make b.) Mesh of SS Type 304 grade of .22 mm
thickness c.) Accessories: EPDM (Ethylene Propylene Diene Monomer) Gasket , SS
Screws , Aluminum cleats , Roller , Push handle , Fly mesh handle , Anti lifter , U guide
glass and mesh shutter complete
1924 Doors and 51.99 BDT Providing & fixing factory-made steel windows constructed of Skin Pass Galvanized Iron As directed by One Square 6383 385
Windows Sheet (as per IS 513 “D" Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 Engineer-in-charge Metre
grams / Sq.Mtr& thickness of 0.6 mm) with a. ) Window Shutter of .6mm thick skin pass
Galvanized lron Sheet b.) Window Frames of .8m thick skin pass Galvanized Iron sheet of
size 80mm X 45mm c.) Mullion : of 0.8mmthick skin pass Galvanized lron sheet of size
80mm X 60mm d.) Vision Glass of 4mm clear float glass in rectangular shape. e.) Finish :
Coated with Zinc Phosphate Primer or Thermosetting Polyurethane paint of Aliphatic
Grade providing high levels of scratch resistance and durability f. ) MS Grill of 10 mm
square MS bright bars g.) Accessories : SS Pin type Hinges — 1 Set; Polypropylene ,
Handle — 1, Friction Stay Powder Coated – 1, MS powder coated Tower bolt — 2 (Ethyl
Propylene Diamine Monomer (EPDM) Should be used all around glass in shutter for
fixing of glass); corner brackets — 4 (made of Polypropylene each per shutter and frame)
complete
Page 377
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1925 Doors 51.100 Providing,aupplying,fabricating and fixing panel of aluminium composite panel cladding As directed by One Square 3870 1150
in approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thick Engineer-in-charge Metre
FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire
resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched
between two aluminium sheets (each 0.5 mm thick of AA 5005/AA3105 grade) The
aluminium composite panel cladding sheet shall be coil coated with kynar 500 based
PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic)
coating of approved colour and sg=hade on top face and polymer (service) coating of
bottom face as specified using stainless steel screws,nuts,bolts,washers,cleats,weather
silicon sealent,backer rods etc .overall weight of the ACP shall not be less than 7.5
Kilogram/ One Square Metre)
1926 Plastering and 51.101 BDL Providing internal cement plaster 25 mm thick in single coat using Ready to use wall As directed by One Square 538 169
Pointing plaster in cement mortar 1:4 to concrete, brick, stone surfaces in all positions including engineer in charge Meter
scaffolding and curing. Providing groove at joint of B.B. Masonry and concrete members
complete.
With Prior Approval of Concerned S.E.
1927 Plastering and 51.102 BDL Providing internal cement plaster 20mm thick in a single coat using Ready to use wall As directed by One Square 456 169
Pointing plaster to concrete, brick surfaces in all positions including scaffolding and curing. engineer in charge Meter
Providing groove at joint of B.B.Masonry and concrete members complete.
a) cement ratio 1:5 With Prior Approval of Concerned S.E.
1928 Plastering and 51.103 BDL Providing internal cement plaster 20mm thick in a single coat using Ready to use wall As directed by One Square 470 169
Pointing plaster to concrete, brick surfaces in all positions including scaffolding and curing. engineer in charge Meter
Providing groove at joint of B.B.Masonry and concrete members complete.
b) cement mortar 1:4 With Prior Approval of Concerned S.E.
1929 Plastering and 51.104 BDL Providing internal cement plaster 20mm thick in a single coat using Ready to use wall As directed by One Square 484 169
Pointing plaster to concrete, brick surfaces in all positions including scaffolding and curing. engineer in charge Meter
Providing groove at joint of B.B.Masonry and concrete members complete
C ) cement mortar 1:3 With Prior Approval of Concerned S.E.
1930 Plastering and 51.105 BDL Providing internal cement plaster 20mm thick in a single coat using Ready to use wall As directed by One Square 484 169
Pointing plaster in cement mortar 1:3 to stone masonry surfaces in all positions including engineer in charge Meter
scaffolding and curing. Providing groove at joint of stone masonry and concrete members
complete. With Prior Approval of Concerned S.E.
1931 Plastering and 51.106 BDL Providing internal cement plaster 12 mm thick in a single coat using Ready to use wall As directed by One Square 235 80
Pointing plaster to concrete or brick surface in all positions including scaffolding and curing engineer in charge Meter
complete. Providing groove at joint of B.B. Masonry and concrete members complete. a)
cement ratio 1:5 With Prior Approval of Concerned S.E.
Page 378
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1932 Plastering and 51.107 BDL Providing internal cement plaster 12 mm thick in a single coat using Ready to use wall As directed by One Square 249 80
Pointing plaster to concrete or brick surface in all positions including scaffolding and curing engineer in charge Meter
complete. Providing groove at joint of B.B. Masonry and concrete members complete. b)
cement ratio 1:4 With Prior Approval of Concerned S.E.
1933 Plastering and 51.108 BDL Providing internal cement plaster 12 mm thick in a single coat using Ready to use wall As directed by One Square 260 86
Pointing plaster to concrete or brick surface in all positions including scaffolding and curing engineer in charge Meter
complete. Providing groove at joint of B.B. Masonry and concrete members complete. c)
cement ratio 1:3 With Prior Approval of Concerned S.E.
1934 Plastering and 51.109 BDL Providing internal cement plaster 6 mm thick in a single coat using Ready to use wall As directed by One Square 198 60
Pointing plaster in cement mortar 1:3 to concrete surface in all positions including scaffolding and engineer in charge Meter
curing. Providing groove at joint of B.B.Masonry and concrete members complete. With
Prior Approval of Concerned S.E.
1935 Brick Masonary 51.110 BDG Providing Autoclaved areated concrete block masonry of approved manufacture As directed by Cubic Meter 7561 1283
confirming to IS 2185 Part III 1984 of size 600 mm x 200mm and thickness 100,150, 200 engineer in charge
or 250 mm using Ready to use BLOCK JOINT MORTAR1:6 in foundations and plinth of
inner walls / external walls including bailing out water, striking joints on unexposed faces,
racking out joints on exposed faces and watering complete. With Prior Approval of
Concerned S.E.
1936 Iron Work 51.111 BDW Providing and fixing 50mm diameter and 1.5 mm thick vertical and top Stainless steel As directed by One Running 3462 1012
hand railing in S.S.304 Grade with Stainless steel square / circular pipe bracing of size 32 Engineer Incharge Metre
mm x32mm x1.5 mm in 3 rows including fabricating ,fixtures, errecting, necessary
welding, grinding, finishing, buffing to stainless steel pipe etc. complete
Page 379
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
water supply and 51.112 BDW Providing and installing bio digester unit based on DRDO technology made of fibre
sanitary reinforced plastic (FRP) having composition and following technical specifications and
including necessary pipe and accessories up to 3 meter length, excluding the necessary
excavation for installing the bio digester.
Percentage of fibre glass (glass content in fibre glass should be minimum 30%): -33.33%
Percentage of polyester resin: - 66.67%
Water absorption (as per ASTM):-0.30%
Flammability as per ASTM
Tensile strength:-115 MPA
Specific Gravity at 25 degree centigrade 1.45
Izod impact strength:-65KJ/M2
Heat defection/distort temperature:-65deg C
Corrosion resistance (Non Corrosive) fitted with
Inlet pipe size rigid PVC: -100mm
Outlet pipe size rigid PVC:-80mm
Gas outlet rigid PVC with Valve: 20mm
Bacteria immobilization PVC mattes (on all partition)
With DRDO TOT licensee and latest batch certificate(month & year of supply) and
capacity as below
1937 a a) Up to 10 user size (1.0mx1.0mx0.70m), Capacity of biodgester:-700 liters, Area of As directed by One Number 40565 4000
top, bottom and side walls: - 4.80 sq.m, Area of partition walls: 1.40sq.m, Total weight Engineer Incharge
of FRP: - 33.48 Kilogram, Bacteria inoculums quantity: - 200 liters , Minimum thickness
of side walls / top and bottom: 3mm, One Number of inside partitions: - 3, Minimum
thickness of partition wall: 3mm.
1938 b b) Up to 15 user size (1.0mx1.0mx1.0m), Capacity of biodgester:-1000 liters, Area of top, As directed by One Number 68345 6800
bottom and side walls: - 6 sq.m, Area of partition walls: 2 sq.m, Total weight of frp: - 54 Engineer Incharge
Kilogram, Bacteria inoculums quantity: - 400 liters, Minimum thickness of side walls / top
and bottom: 4mm, One Number of inside partitions: - 3, Minimum thickness of partition
wall: 3mm
1939 c c) Up to 25 user size (1.5mx1.0mx1.0m), Capacity of biodgester:-1500 liters, Area of top, As directed by One Number 93175 9300
bottom and side walls:- 8 sq.m, Area of partition walls: 2 sq.m, Total weight of frp: - Engineer Incharge
82.80 Kilogram, Bacteria inoculums quantity: - 600 liters, Minimum thickness of side
walls / top and bottom: 5mm, One Number of inside partitions: - 3, Minimum thickness of
partition wall: 3mm
Page 380
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1940 d d) Up to 40 user size (2.0mx1.0mx1.0m), Capacity of biodgester:-2000 liters, Area of top, As directed by One Number 123978 12000
bottom and side walls: - 10 sq.m, Area of partition walls: 3 sq.m, Total weight of frp: - Engineer Incharge
106.20 Kilogram, Bacteria inoculums quantity: - 600 liters, Minimum thickness of side
walls / top and bottom: 5mm, One Number of inside partitions: - 3, Minimum thickness of
partition wall: 3mm
1941 e e) Up to 60 user size (2.4mx1.25mx1m), Capacity of Biodigester:-3000 liters, Area of top, As directed by One Number 163261 16000
bottom and side walls: - 13.30 sq.m, Area of partition walls: 3.75sq.m, Total weight of Engineer Incharge
FRP: - 139.95 Kilogram, Bacteria inoculums quantity: - 1000 liters, Minimum thickness
of side walls / top and bottom: 5mm, One Number of inside partitions: - 3, Minimum
thickness of partition wall: 3mm
1942 f f) Up to 80 user size (2.7mx1.5mx1m), Capacity of Biodigester:-4000 liters, Area of top, As directed by One Number 236232 23000
bottom and side walls: - 16.50 sq.m, Area of partition walls: 4.50sq.m, Total weight of Engineer Incharge
FRP: - 202.50 Kilogram, Bacteria inoculums quantity: - 1400 liters, Minimum thickness
of side walls / top and bottom: 6mm, One Number of inside partitions: - 4, Minimum
thickness of partition wall: 3mm
1943 g g) Up to 100 user size (2.5mx2mx1m), Capacity of Biodigester:-5000 liters, Area of top, As directed by One Number 290862 29000
bottom and side walls: - 19.00 sq.m, Area of partition walls: 8.00sq.m, Total weight of Engineer Incharge
FRP: - 248.40 Kilogram, Bacteria inoculums quantity: - 1800 liters, Minimum thickness
of side walls / top and bottom: 6mm, One Number of inside partitions: - 4, Minimum
thickness of partition wall: 3mm
1944 h h) Up to 150 user size (3.2mx2.0mx1.25m), Capacity of Biodigester:-8000 liters, Area of As directed by One Number 466876 46000
top, bottom and side walls: - 25.80 sq.m, Area of partition walls: 10.00sq.m, Total weight Engineer Incharge
of FRP: - 397.08 Kilogram, Bacteria inoculums quantity: - 3200 liters, Minimum
thickness of side walls / top and bottom: 7mm, One Number of inside partitions: - 4,
Minimum thickness of partition wall: 4mm
1945 i i) Up to 200 user size (4mx2.0mx1.25m), Capacity of Biodigester:-10000 liters, Area of As directed by One Number 549936 54000
top, bottom and side walls: - 31.00 sq.m, Area of partition walls: 10.00sq.m, Total weight Engineer Incharge
of FRP: - 462.60 Kilogram, Bacteria inoculums quantity: - 3400 liters, Minimum
thickness of side walls / top and bottom: 7mm, One Number of inside partitions: - 4,
Minimum thickness of partition wall: 4mm
1946 j j) Up to 300 user size (4.8mx2.0mx1.25m), Capacity of Biodigester:-12000 liters, Area of As directed by One Number 689174 68000
top, bottom and side walls: - 36.20 sq.m, Area of partition walls: 10.00sq.m, Total weight Engineer Incharge
of FRP: - 593.28 Kilogram, Bacteria inoculums quantity: - 4200 liters, Minimum
thickness of side walls / top and bottom: 8mm, One Number of inside partitions: - 4,
Minimum thickness of partition wall: 4mm
Page 381
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1947 k k) Up to 400 user size (5mx2.0mx1.5m), Capacity of Biodigester:-15000 liters, Area of As directed by One Number 800153 80000
top, bottom and side walls: - 41.00 sq.m, Area of partition walls: 12.00sq.m, Total weight Engineer Incharge
of FRP: - 678.80 Kilogram, Bacteria inoculums quantity: - 5200 liters, Minimum
thickness of side walls / top and bottom: 8mm, One Number of inside partitions: - 4,
Minimum thickness of partition wall: 4mm
1948 l l) Up to 500 user size (6mx2.0mx1.6m), Capacity of Biodigester:-20000 liters, Area of As directed by One Number 1081250 100000
top, bottom and side walls: - 50.72 sq.m, Area of partition walls: 13.36sq.m, Total weight Engineer Incharge
of FRP: - 917.86 Kilogram, Bacteria inoculums quantity: - 7000 liters, Minimum
thickness of side walls / top and bottom: 9 mm, One Number of inside partitions: - 4,
Minimum thickness of partition wall: 4mm
1949 water proofing 51.113 BDJ Providing and laying Hyperplas Aluminium or equivalent polymeric multiple monolithic As directed by One Square 853 257
five layer water proofing flexible, pliable and high tensile strength membrane (3 Engineer Incharge Metre
Kilogram/ One Square Metre) which is comprise of top with "V" shape embossed 40
micron Aluminium foil to bear thermal expansion and avoiding delamination & consist of
centre core of 90 micron thick High Molecular High density Polyethylene film
(HMHDPE) which is protected on both the side with polymeric mix. Applying the
membrane by thermofusing to roof & parapet after applying thin film of hot blown
bitumen 85/25 or 90/15 grade @ 1.2 Kilogram/ One Square Metre maximum as per
surface condition or Hyperplas primer @ 250 gms/ One Square Metre as per site condition
on the surface to be treated with 10 cm overlapping including finishing etc. complete and
covering guarantee of 7 years on stamp paper of Rs. 100/- and as directed by Engineer-in-
charge. (Prior permission of S.E.in writing is necessary before inclusion of this item in
estimate).
1950 water proofing 51.114 BDJ Providing and laying Hyperplas standard or equivalent polymeric multiple monolithic five As directed by One Square 678 115
layer water proofing flexible, pliable and high tensile strength membrane (3 Kilogram/ Engineer Incharge Metre
One Square Metre) & consist of centre core of 90 micron thick High Molecular High
density Polyethylene film (HMHDPE) which is protected on both the side with polymeric
mix. Applying the membrane by thermofusing to roof & parapet after applying thin film
of hot blown bitumen 85/25 or 90/15 grade @ 1.2 Kilogram/ One Square Metre maximum
as per surface condition or Hyperplas primer @ 250 gms/ One Square Metre as per site
condition on the surface to be treated with 10 cm overlapping including finishing etc.
complete and covering guarantee of 7 years on stamp paper of Rs. 100/- and as directed by
Engineer-in-charge. (Prior permission of S.E.in writing is necessary before inclusion of
this item in estimate).
Page 382
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1951 water proofing 51.115 BDJ Providing and laying mechanical protective layer over water proofing membrane with As directed by One Square 390 193
cement screed plaster 1:5 after laying chicken mesh over membrane including curing etc. Engineer Incharge Metre
complete 20 mm thick with cost of chicken mesh etc. complete and covering 7 years
guarantee on court stamp paper of Rs.100/- including necessary testing specified by
Engineer (Prior permission of S.E. is necessary before inclusion of this item in estimate)
(Note :- This item shall be executed over item One Number 5 of BD-J Water Proofing)
1952 Plastering 51.116 BDL Providing and applying a Silicon Base Water Repellent Stone Sealers, on Brick / Stone As directed by One Square 557 0
masonry / Concrete surfaces in Two coats by spraying. Including cleaning / sand blasting Engineer Incharge Metre
for removing dirt / cement mortar patches etc. by force water jet, wire brushing etc.
complete.
1953 Plastering 51.117 BDL Providing internal / external 12 mm thick Ready Mix plaster confirming to IS:4031(Part- As directed by One Square 238 82
4) 1988 and IS 383-1970 in a single coat using Cement mortar of proportion 1:4 Engineer Incharge Metre
containing special type of polymer additives about 0.4%, to all type of surfaces in all
positions including scaffolding and curing complete.
1954 Plastering 51.118 BDL Providing internal / external 20 mm thick Ready Mix plaster confirming to IS:4031(Part- As directed by One Square 417 156
4) 1988 and IS 383-1970 in a single coat using Cement mortar of proportion 1:4 Engineer Incharge Metre
containing special type of polymer additives about 0.4%, to all type of surfaces in all
positions including scaffolding and curing complete
1955 Brick Masonary 51.119 BGG Providing brick masonry with interlock "Fourlock" bricks in retaining walls ,diaphragm As directed by One Square 1547 341
wall ,compound wall ,plinth & partition wall etc of specified 150 mm thick including Engineer Incharge Metre
construction with interlock "Fourlock" brick, filling the hollow spaces with cementious
grout material of proportion of C:M 1:6 using trap stone grit metal/artificial sand dusting
off the finished brick masonry"Fourlock" bricks, surface,watering & curing etc complete. (
Including steel reinforcement of 8mm bar as strengthening bar in hollow spaces of
fourlock bricks with cementious greet material )
1956 Brick Masonary 51.120 BGG Providing brick masonry with interlock "Fourlock" bricks in plinth & superstructure of As directed by One Square 1291 297
specified 150 mm thick including construction with interlock "Fourlock" bricks,filling the Engineer Incharge Metre
hollow spaces with cementious grout material of proportion of C:M 1:6 using trap stone
grit metal/artificial sand including dusting off the finished brick masonry surface,watering
& curing etc complete. ( Excluding steel reinforecement for strengthening )
Page 383
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1957 Brick Masonary 51.121 BGG Providing brick masonry with interlock "Fourlock" bricks in retaining walls ,diaphragm As directed by One Square 1315 341
wall ,compound wall ,plinth & partition wall etc of specified 100 mm thick including Engineer Incharge Metre
construction with interlock "Fourlock" brick, filling the hollow spaces with cementious
grout material of proportion of C:M 1:6 using trap stone grit metal/artificial sand dusting
off the finished brick masonry"Fourlock" bricks, surface,watering & curing etc complete. (
Including steel reinforcement of 8mm bar as strengthening bar in hollow spaces of
fourlock bricks with cementious greet material )
1958 Brick Masonary 51.122 BGG Providing brick masonry with interlock "Fourlock" bricks in plinth & superstructure of As directed by One Square 1059 275
specified 100 mm thick including construction with interlock "Fourlock" bricks,filling the Engineer Incharge Metre
hollow spaces with cementious grout material of proportion of C:M 1:6 using trap stone
grit metal/artificial sand including dusting off the finished brick masonry surface,watering
& curing etc complete. ( Excluding steel reinforecement for strengthening )
Page 384
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1959 Rigid Pavement 51.123 RD Construction of M-40 grade reinforced prestressesd precast concrete panel of 200 mm As directed by One Cubic Metre 16589 338
(New item) thickness having size 4.5m x 3.5m or as per drawing, casting the panels as per approved Engineer in
design and drawing in factory or plant including cost of all materials, formwork, charge
reinforcement, dowel bars, tie bars, chairs, lifting bolts, grout ports, labour and all
necessary machineries which are required for prestressing the wires, preparing concrete
mix as per job mix design (The minimum cement content for M40 grade of PPCP shall be
440 Kilogram/cum of concrete), making slots in panels for fixing dowel bars, tie bars, and
placing necessary reinforcement as per design and drawing, steam/curing for 28 days
including lifting, transportating and placing the panels at the required position, line, level
and alignment as directed by Enginner in Charge, with max 20% fly Ash ( Fly-ash upto
20% by weight of Cement) over a prepared sub base. including providing and fixing in
position MS Plain dowel bars precoated with anticorrosive epoxy paint of required Dia.
having 45 cms. length and at 30.00 cm. c/c lubricated for half length with bituminous
paint and providing & fixing TMT Fe 500 tie bars 12 mm dia. 60 cm long at 75 cm c/c,
handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper
alignment by using properly designed assembly of Bulkheads. Including, Grouting of
base of the panels as well as dowel and tie slots in the panels, Providing contraction joints
polysulphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into groove of
specified size and shape as per detailed drawing including fixing Polyethylene foam
backer rod of required diameter (appraox. 25% larger than the initial 3 mOne Metric
Tonneo 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item
includes cleaning the joints with water jet / air compressor and allowing joint to become
thoroughly dry before sealent is applied and applying primer.(A) Contraction and
longitudinal joints (50 mm. deep x max. 6 mm wide)
1960 Road Furniture 51.124 RD Providing and laying of Plastirib T or equivalent raised profile edge line marking (audible As directed by One Square 1009 27
vibratory) with special hot applied thermoplastic road marking compound according to Engineer in Metre
IRC 35 : 2015, Clause 7.7 with2 mm thick base coat layer above that ribs profile size of charge
length 40 mm x width 140 mm x height 6mm thick (Total 8 mm thick) at the distance of
250 mm between two ribs including reflectorizing glass beads @ 250 gm / sq. mtr. area.
The minimum and maximum width of raised profile should be 150 mm. The thickness of
8 mm profil should be exclusive of surface applied glass beads. The finished surface to be
exclusive of surface applied glass beads. The finished surface to be levelled, uniform and
free from streaks and holes, to be applied on edge lines.
Page 385
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1961 Road Furniture 51.125 RD Providing and laying of Plastirib 2K or equivalent raised profile edge line marking As directed by One Square 2629 27
(audible vibratory) with special 2 component cold applied road marking compound Engineer in Metre
according to IRC 35 : 2015, Clause 7.7 with 2 mm thick base coat layer above that ribs charge
profile size of length 40 mm x width 140 mm x height 6mm thick (Total 8 mm thick) at
the distance of 500 mm between two ribs including reflectorizing glass beads @ 250 gm /
sq. mtr. area. The minimum and maximum width of raised profile should be 150 mm. The
thickness of 8 mm profil should be exclusive of surface applied glass beads. The finished
surface to be exclusive of surface applied glass beads. The finished surface to be levelled,
uniform and free from streaks and holes, to be applied on edge lines.
1962 Road Furniture 51.126 a RD Providing and Laying of Rumble strips with Plastirib 2K, or equivalent 2 component cold As directed by One Square 3706 27
plastic profiled material to give total width of 500 mm and height of 10 mm. Ramp Engineer in Metre
provided to give width of 145 mm, width of ribs to be 55mm laid at centre to centre charge
distance of 35 mm, with reflective glass beads @ 350 gm / One Square Metre. The
finished surface to be levelled, uniform and free from streaks and holes, to be applied on
the edge lines, including surface cleaning and cost of all materials etc. complete.
1963 Road Furniture 51.126 b RD Providing and Laying of 2 or more sets (6 Nos. each set) Dual Ribs Pattern Rumble As directed by One Square 4333 44
Markings on roads with vehicular speeds of more than 50 Km/hr laid as per the spacing Engineer in Metre
recommended for each set under Table 11.1 and Fig. 11.2 of IRC 35:2015 using Plastirib charge
2K, or equivalent 2 component cold plastic profiled material. Each Dual Rib pattern
rumble marking shall have width of 500 mm. Each dual rib pattern rumble marking shall
have 2 ribs each of Width of 100 mm and height 20 mm. Gap between two ribs shall be
300 mm. Each rumble marking shall be made complete with drop on Soild Plus reflective
glass beads @ 300 gm / One Square Metre spread throughout the surface of marking. The
finished surface to be levelled, uniform and free from streaks and holes, including surface
cleaning and cost of all materials etc. complete.
1964 Road Furniture 51.127 RD Supplying and fixing of Plastic body studs with two shanks and without shanks of As directed by One Number 477 27
SWAREFLEX or equivalent in yellow, red and white color made of ABS body with size Engineer in
100*100*17.9 mm, having reflective panels of 34 special Swaro glass reflective elements charge
embedded in plastic and 19 degrees tilted to provide the highest reflectivity. Having
reflective panels in yellow, red and white plastic with yellow, red, white or green Swaro
glass elements. The studs shall have a compressive strength test certificate of 25 tons in
accordance with ASTDM D 4280 and successfully passing retro reflectivity test as per
EN 1463-1 and the road test EN 1463-2 from a reputed laboratory. The fixing of the road
studs shall be done by using a recommended Two Component Epoxy. In addition two
holes should be drilled in the depth of 50 mm on the road for the version with two shanks.
Page 386
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1965 Road Furniture 51.128 RD Supplying and fixing of Swareflex or equivalent Metal Road studs with shank, made of As directed by One Number 562 27
Die-cast Aluminum alloy molded body with the size of 100*100*19.8 mm, shank size Engineer in
50mm, having reflective panels of 34 glass reflective elements embedded in plastic and 19 charge
degrees tilted to provide the highest reflectivity having reflective panels in yellow, red
and white plastic with yellow, red, white or green glass elements. The weight of
Aluminum stud should be not less than 370 grams. The studs shall have a compressive
strength test certificate of 40 tons in accordance with ASTDM D 4280-04 and
successfully passing retro reflectivity test as per EN 1463 part 1 & part 2, from a reputed
international laboratory . The bidder shall attach a product warranty certificate against
Breakage and loss of reflectivity from the manufacturer for 3 years from installation. The
fixing of road studs shall be done by using a recommended Two Component Epoxy after
drilling 60 mm hole on the road for the shank to go inside.
1966 Road Furniture 51.129 RD Supplying and fixing of Plastic body of Swaro Warn or equivalent 184*81*60 mm, As directed by One Number 3446 27
mounted on road side plastic guide posts at a height of 80cm to 100cm from the ground Engineer in
level and fixed on post with screws supplied with the Swaro warn product. Swaro Warn charge
comes in white or blue color. Visual wildlife warning system deflecting the headlights of
approaching vehicle towards Road side at Dusk or night for creating a visual warning
fence for the wildlife to avoid the accidents of wild life. Confirming standards RVS
04.03.12. The Swaro Warn article 7178 can be used for all types of terrain.
Page 387
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1967 Road Sub Grade 51.130 RD Stabilization of Soil or Sub-Base/Base Course or Existing Pavement Crust upto the As directed by One Cubic Metre 3627 0
required depth by In-Situ Stabilization method using Cement / Cementitious additives / Engineer in
Chemical additives / Combination: charge
Providing and pre-spreading of Binder (Cement / Cementitious additives / Chemical
additives / combination) at rate of required quantity (% by weight) as per job mix design
in accordance with IRC 37-2018 using a truck-mounted automated binder spreader with
micro-processor controlled weighing and spreading system. The binder spreader shall
have variable working width upto 2.4m to efficiently manage the width of the whole
pavement.
The in-situ stabilization process shall be carried out using a self-propelled wheeled
Stabilizer / Reclaimer with a minimum working width of 2m or 2.4m and minimum
engine horsepower of 305 kW having in-built automated water-spraying and depth control
systems with variable working depth of up to 500 mm. The entire in-situ process shall be
carried out in a single pass including pulverizing of soil/aggregates/combination or
milling of existing asphalt pavement and simultaneous mixing with pre-spread binder
(cement/additive) and water to the desired depth.
The resultant stabilized mix shall be compacted using a vibratory padfoot compactor of 14-
20 tonne weight as per design depth and then graded to the required profile, level and
thickness using a motor grader. The graded surface shall be then compacted using a
smooth vibratory roller to achieve the desired proctor density as per IRC 37-2018 and
complete in all respects including curing with water as required including all materials,
labor, machinery, etc.
Necessary graded stone aggregates shall be added by pre-spreading with cement to
achieve desired gradation and profile of the road. The minimum unconfined compresssive
strength (UCS) of stabilized sub-base should be 4.5 / 7 MPa after 7 / 28 days curing as per
IRC 37-2018 .Also, durability aspects (wet-dry cycles) of stabilized sub base should be
satisfied as per IRC 37-2018 .The gradation mixes and materials should be as per IRC 37-
2018.
Page 388
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1968 Road 51.131 RD Rehabilitation of existing damaged asphalt pavement by Cold In-Place Recycling (CIPR) As directed by One Cubic Metre 7370 0
Maintainance process, using foamed bitumen as binder and cement as filler, as per IRC 120-2015 / IRC Engineer in
37-2018: Providing a layer of fresh aggregates as per design mix by evenly pre-spreading charge
on the exisiting damaged asphalt surface using paver or motor grader to achieve the
desired gradation and profile of the road. 1% cement by weight of the mix shall be pre-
spread on the layer of fresh aggregates using a truck-mounted automated binder spreader
with micro-processor controlled weighing and spreading system. The binder spreader shall
have variable working width upto 2.4m to efficiently manage the width of the whole
pavement. The pre-spread fresh aggregates and cement and the existing damaged
pavement shall be then pulverized and recycled in-situ up to design depth by injecting 2-
2.5% bitumen (VG30) as foamed bitumen as per design mix using a self-propelled
wheeled Recycler equipment with a minimum working width of 2m or 2.4m and
minimum engine horsepower of 305 kW. The Recycler equipment should have in-built
automated water-spraying system and temperature-controlled foamed bitumen injection
system with variable and controlled working depth of up to 500 mm. The entire in-situ
recycling process shall be carried out in a single pass including milling and pulverizing of
existing asphalt pavement with pre-spread aggregate and cement up to desired depth and
simultaneous injection of foamed bitumen and water as per job mix design.The resultant
recycled mix should be then compacted to required density using 14-20 tonne vibratory
padfoot compactor as per design depth; profiled by motor grader and further compacted
by smooth vibratory roller and PTR and complete in all respects as required including all
materials, labor, machinery, etc. (This cold recycled surface shall be then covered with
tack coat and bituminous concrete of 50mm thickness, cost of both to be accounted
separately)
1969 Road Safety 51.132 RD Providing and erecting a Road Restraint system - Roller System Barrier ETI Roller As directed by One Running 74511 0
System H1 & H2 comprisiong of post of hot dip galvanized steel of 139.8mm diameter (L- Engineer in Metre
2200 and L-750 ) thickness 4.5 mm spaced with interval of 1 meter installed in to charge
hardened road . Safety frame rail from sheet of 3.20mm thick are fixed to main posts,
shock absorbing rollers 345 mm diameter and 480mm height made of polypropelene -
EVA , post caps, locker , pipes and connection material. Distance between main post and
short post shall be 500 mm. the height of upper edge rail is 960 mm. All steel parts(
FRAME s235R equivalent SS400) and post S235JR shall be hot dip galvanised to protect
against corrosion. The system shall be installed in accordance with the drawings and
assembly instructions. etc. complete.
Page 389
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1970 Road Surfacing 51.133 MORTH Section- Providing and laying Stone Matrix Asphalt with 100-120 TPH batch type hot mix plant MORTH Section- One Cubic Metre 11689 0
Course 515 producing an average output of 75 tonne per hour using crushed aggregate of specified 515
grading premixed with bituminous binder @ 5.80 minimum percent of mix and filler,
transporting the hot mix towards site, laying with hydrostatic paver finisher with sensor
control to required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification clause One
Number515 etch. complete in all respects, IRC SP 79
1971 Road 51.134 RD Milling of existing bituminous surface to specified depth of bituminous layer including As directed by One Square 44 0
Maintainance disposal of removed material with all lift and lead upto 1000 m etc complete. Using Engineer in Metre
machine like Writgen (W100) or equivalent charge
1972 Road 51.135 RD Providing and applying low viscosity bitumen emulsion RS1 for sealing cracks less than 3 As directed by One Square 38 0
Maintainance mm wide or incipient fretting or disintegration in an existing bituminous surfacing. Engineer in Metre
charge
1973 Road Surfacing 51.136 MORTH Section- Providing and laying Microsurfacing course comprising of dry (A) fine aggreegates MORTH Section- One Square 179 0
Course 514 confirming to Type III grading @12 Kilogram/ One Square Metre. of Road Surface 514 Metre
coverage of specification as per IRC SP 81, 2008 Polymer / latest modified cationic quick
setting bitumen emulsion having 60% binder content and 3.6% polymer (B) @ 12.5% by
weight of fine aggregate ordinary portland cement (C) @ 2% by weight of agrregate
chemical additives (D) @1.5% by weight of fine aggregate and water as per requirement.
1974 Road 51.137 RD Providing and laying a Stress Absorbing Membrane Interlayer (SAMI) / bitumen As directed by One Square 125 0
Maintainance impregnated geotextile layer after cleaning the road surface, geotextile conforming to Engineer in Metre
requirements of clause 703.3, laid over a tack coat with 1.05Kilogramper One Square charge
Metre of paving grade bitumen 80 - 100 penetration / emulsion as per requirement and as
directed by Engineer in Charge.
Road RD Pot Hole filling with Jet Patcher-Repairs to potholes 50 mm upto 100 mm by using
Maintainance semidense bituminous concrete in cold mix by using emulsion including making the
potholes /patches in regular shape and size. Removing loose pockets, Dewatering in
potholes,tack coats of 25 Kilogram/10 Sq.Mt.with RS1 emulsion etc.by use of advanced
jetpatching technolgy machine of approved make and specification having capacity 5.50
TO 8.00 cubic meters with auxillary engine with direct drive to heavy duty blower, Rotary
Positive Displacement Blower with direct drive and separate airline silencer. (Capacity –
15 PSI, Flow rate 1370/cum/hr). cleaning as directed by Engineer – in-Charge etc.
complete (Emulsion @ 5% by weight of mix )
Page 390
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1975 Road 51.138a RD Upto 50mm As directed by One Square 1317 180
Maintainance Engineer in Metre
charge
1976 Road 51.138b RD 50mm-100mm As directed by One Square 1867 180
Maintainance Engineer in Metre
charge
1977 Road Surfacing 51.139 a MORTH 511 Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed MORTH 511 One Square 191 5
Course of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site Metre
with VTS , laid over a previously prepared surface, finished to the required grade, level,
alignment, and rolling to achieve the desired compaction but excluding prime / tack and
Seal coat. For Bitumen of specified grade--USING Batch mix type hot mix plant with
SCADA, Paver and Vibratory roller( over BT Surface) (VG-30 bulk bitumen rates are
considered to arrive at rates)
1978 Road Surfacing 51.139 b MORTH 511 Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed MORTH 511 One Square 198 5
Course of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site Metre
with VTS , laid over a previously prepared surface, finished to the required grade, level,
alignment, and rolling to achieve the desired compaction but excluding prime / tack and
Seal coat. For Bitumen of specified grade--USING Batch mix type hot mix plant with
SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are
considered to arrive at rates)
Page 391
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1980 Bridge 51.141 BR Providing and applying epoxy bonding agent for bonding old to new concrete for As directed by One Square 516 0
Maintenance structural members prior applying the epoxy mortar to the concrete surfaces etc complete. Engineer in Metre
charge
1981 Bridge 51.142 BR Providing and applying epoxy mortar of resin and hardner with Sillica sand upto 20 mm As directed by One Square 4858 0
Maintenance thickness of Sika/Fosroc/Pidilite or its equivalent including proper wire brushing etc Engineer in Metre
complete as per the direction of Site-In-Charge. charge
1982 Bridge 51.143 BR Charges for groove cutting of15 mm x 15 mm deep along crack and sealing and refilling As directed by One Running 459 0
Maintenance the same with epoxy mortar including cost of material, labour etc. complete Engineer in Metre
charge
1983 Bridge 51.144 BR Cleaning of rocker & roller bearing using high pressure water jet, free from rust scales, re- As directed by Per bearing 9335 0
Maintenance setting & greasing the bearings using graphite grease including cost of materials, labour Engineer in
etc., complete. charge
1984 Bridge 51.145 BR Bearing cleaning and pier cap cleaning for the proper movement of bearing etc. complete As directed by One Number 9605 0
Maintenance including all tools and machineries scaffolding etc. complete as per the direction of Site in Engineer in
Charge. charge
1985 Bridge 51.146 BR Providing and applying “high strength, non shrink free flow grout material” i. e. micro As directed by One Cubic Meter 67000 0
Maintenance concrete (like shrink comp or equivalent) having compressive strength as 400 Engineer in
Kilogram/sq.cm. including finishing the surface and curing for 07 days. Etc complete. The charge
usage of this non shrink concrete with zero slump is to allow to occupy every free space
leaving no voids, thereby producing dense concrete with proper bonding with concrete
(The quoted rates to be inclusive of all materials, labours, tools & tackles, transportation,
taxes etc complete) to be applied for foundation and strengthening of pier etc and as per
the direction of Site-In-Charge. (The product like Ultratech/Rendroc (RGL) of FOSROC
or its equivalent)
1986 Bridge 51.147 BR Providing applying Polymer modified cement mortar pointing to the stone massonry As directed by One Square 1435 0
Maintenance structure including chipping, cleaning, applying bonding agent, stagging, curing and and Engineer in Metre
all tools and tackes including safety etc. complete. charge
1987 Bridge 51.148 BR Grouting to the Dowel bars with epoxy of resin+hardner to ensure the proper fixing of As directed by One Number 429 0
Maintenance dowel bars including all the machineries etc. complete, as per the direction of Site- In- Engineer in
Charge. charge
Page 392
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1988 Bridge 51.149 BR Providing and applying waterfroof coating to the concrete surface to resist entry of As directed by One Square 97 0
Maintenance moisture and prevent growth of fungus etc. complete as per the direction of site in charge. Engineer in Metre
charge
1989 Bridge 51.150 BR Lifting of span and bearing locations by suitable hydraulic jacks connected by high As directed by One Span 176233 0
Maintenance pressure, rubber hoses to pump & removal of old exsting bearing ( Roller side only) As Engineer in
per Quotation charge
1990 Bridge 51.151 BR Strengthening structural elements by providing & fixing CARBON FIBER (Make Sika As directed by One Square 6260 0
Maintenance or BASF or FOSROC) Surface preparation: Grinding concrete substrate, cleaning it with Engineer in Metre
wire brush removing oil, laitance if present, rounding sharp edges to min 25 mm radius charge
etc. complete.Profiling: providing & Applying compatible Mbrace primer on prepared
substrate, Filling the holes and uneven surface with high strength epoxy putty etc.
complete IF Required. Wrapping: Providing & Applying first coat of Saturant, cutting the
carbon fiber sheet to size, wrapping the fiber sheet to structural element at desired
orientation using tamping roller to avoid any air voids etc. complete.Sand pasting:
Providing & Applying second coat of Saturant after min. 12 hrs, rectify air voids if any
paste the rive sand on it to make surface rough to take any further finishes(Mode of
measurement: Per sq.mt of Mbrace CF 400 sheet applied and not surface area of
Concrete application & Quantity will be measured including wastage) The rate includes
all type of material,application,equipment & scaffolding etc complete. Rate is applicable
for all height & level.
1991 Bridge 51.152 BR Replacement of existing damaged Expansion joints by providing and laying of Strip Seal As directed by One Running 19016 0
Maintenance Expansion Joint System, including removal of existing damaged exp joints by dismantling Engineer in Metre
of deck slab, wearing coat etc. and back filling of the recess up to final finish level with charge
conc of grade M-35, complete as per M.O.R. T&H specification.
1992 Bridge 51.153 BR Providing Polymer modified cement Mortar treatment after removing of existing, clading, As directed by One Square 6345 0
Maintenance plaster, gunite & cleaning and preparing the surface.Applying Polymer cement bond coat Engineer in Metre
and Polymer modified cement Mortar as per manufacturer specification up to 50 mm thick charge
with 8% polymer by weight of cement to fill the all cavities & making protective cover
plaster including shuttering
1993 Bridge 51.154 BR Providing, drilling and fixing Nipples for pressure injection grouting of polymer cement As directed by One Number 266 0
Maintenance grout etc. complete Engineer in
charge
1994 Bridge 51.155 BR Filling voids/honeycomb with high pressure injection grouting of Polymer Cement Grout As directed by One Kilogram 219 0
Maintenance (10% of Polymer by Weight of Cement) Engineer in
charge
Page 393
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1995 Bridge 51.156 BR Providing and laying in situ / ready mix M35 grade RCC jacketing work around the As directed by One Number 9280 0
Maintenance existing piers of bridges etc. complete. (with fully automatic micro processor based PLC Engineer in
with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of charge
required specifications ( VSI sand finely washed etc ), height of 8 to 10 meter)
1996 Bridge cum 51.157 A) Precast BeB Panals As directed by One Square 2967 0
Bhandara 1 Providing and fixing Precast M 25 grade Concrete curved section of 100 mm thick to Engineer in Meter
serve as bandhara as per the standard drawing approved by department having elliptical charge
shape with base upto 6m as per table attatched to be casted in factory in suitable sections
and transporting to site and erecting the same including all leads, lifts, labour and
machinaries with finishing .One Number of elements in which compled section is
proposed to be cast shall be approved.Necessary equipments for placing giving support
through turn bucle or similar arrangement to maintain its verticality till insitu joining..The
total steel quantity is 75Kilogram per cubic meter of concrete The method statement shall
be prepared and got approved from engineer including cost of plasticizer and viscocity
admixure.
1997 Bridge cum 51.158 b) Hot Dip Galvanised Needle Gate As directed by One Metric 166000 49800
Bhandara 1 Manufacturing with OAP & fabrication of hot dip galvanised needle gates - curved type Engineer in Tonne
of required size and Weight as per the detailed design and drawings with all material, charge
Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding
electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges,
machinery charges, 1km lead charges of transportation, loading and unloading charges of
Gate parts at Site, Inspection & Quality control charges, Sand blasting,overhead charges
of 10%, and all incidential charges including all duties, taxes, levies and insurance charges
excludung GST
1998 Bridge cum 51.159 Providing and fabricating and fixing at site hot dip galavanised structural steel work in As directed by One Metric 110000 33000
Bhandara rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or Engineer in Tonne
as directed including cutting, fabricating, hoisting, erecting, fixing in position making charge
riveted I bolted Iwelded connections without connecting plates, braces etc. complete
including all transporation , labour and all lift excluding GST
Page 394
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
1999 Bridge cum 51.160 c) FRP Needle Gate As directed by One Square 18340 5502
Bhandara 1 Providing , supplying and fixing of FRP gates -needles in curved or straight shape in Engineer in Meter
size required size and 60mm thick for the Bridge -cum- Bandhara .The gate/needles charge
should withstand under minimum water pressure of 7.00 tonne. with interlocking
arrangements, required rubber seals to arrest water leakage due to surface unevenness
including FRP "C" channels at both side of gate of size 100 mm x 100 mm with 10 mm
thick, with lifting eye bolts. And as per specifications mentioned in the Technical
spectications and product features excluding GST
2000 Bridge cum 51.161 Providing and fixing Sill beam in size 100 X100 mm with 10 mm thick, in FRP material As directed by One Running 2500 750
Bhandara with lifting eye bolts. And as per specifications mentioned in the Technical spectications Engineer in Meter
and product features excluding GST charge
2001 Cubical Toilet 51.162 Supply and installation of cubicles of width and depth as per Athena Lite- SS Series As directed by One Square 11196 352
Cubicles- Std Sizes (W x D x H): 900 mm x 1550 mm x 2105 mm, (Height is including Engineer-in-charge Metre
100 mm gap from bottom, Door Width- 600 mm specifications/ site drawings). Cubicle
height to be 2105 mm. Made from solid grade compact high pressure laminate as per
IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature
>120°C, All doors will be of single colour and made of 12 mm thick Merino HPL
compact panel. The doors will have chamfered edges. Each door will be supported by 3
stainless steel made hinges affixed to the pilasters. Size of panels to be as per drawing.
HARDWARE & ACCESSORIES are H shaped (Top) head frame structure made of
extruded Aluminium grade 6063 T5-50 micron epoxy powder coated for surface
protection, Size to be 125x70x5T. Corner joinery section, Size to be 40x16.5x1.8T. U-
Channel Wall joinery section,Size to be 22x16x1.6T. Door stopper section, Size to be
21x12.5x1.6T. Spring loaded Butt Hinges made from Stainless steel grade 304. Surface
finish to be matt type. Covers to be lacor coated.etc complete.
Page 395
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2002 Cubical Toilet 51.163 Supply and installation of CEILING HUNG cubicles of width and depth as per As directed by One Square 9051 270
specifications/ site drawings. Cubicle height to be 2400 mm. Std Sizes (W x D x H): 900 Engineer-in-charge Metre
mm x 1550 mm x 2400 mm, (Height is including 100 mm gap from bottom) Door Width-
600 mmITEM DESCRIPTION Made from solid grade Merino make compact high
pressure laminate as per IS:2046 and EN 438 manufactured under high specific pressure >
5 MPa and temperature >120° C, All doors will be of single colour and made of 18 mm
thick Merino HPL compact panel. The doors will have chamfered edges. Each door will
be supported by 3 stainless steel made hinges affixed to the pilasters. All intermediate
partitions or dividers will be made of 12 mm thick Merino HPL compact laminate panels.
Size of panels to be as per drawing. HARDWARE & ACCESSORIES are H shaped (Top)
head frame structure made of extruded Aluminum grade 6063 T5-50 micron epoxy
powder coated for surface protection. Size to be 125x70x5T. Corner joinery section, Size
to be 40x16.5x1.8T. U-Channel Wall joinery section, Size to be 22x16x1.6T. Door
stopper section, Size to be 21x12.5x1.6T. Spring loaded Butt Hinges made from Stainless
steel grade 304. Surface finish to be matt type. Covers to be lacor coated.Coat hook with
rubber stopper made from Stainless steel grade 304. Surface finish to be matt type. etc
complete.
2003 Cubical Toilet 51.164 Supply and installation of PD DOOR cubicles of width and depth as per specifications/ As directed by One Square 8762 875
site drawings. PD Door height to be 1980/2100 mm.PD Doors Series : Std Sizes (W x Engineer-in-charge Metre
H): 2100 mm x 7500 mm (Height is including 150 mm gap from bottom), Door Made
from solid grade Merino Make compact high pressure laminate as per IS:2046
manufactured under high specific pressure > 5 MPa and temperature >120°C ,.Panel
thickness 12 mm. Size of panels to be as per drawing. HARDWARE & ACCESSORIES
are Specially designed D-shape wall mounted pole made from extruded grade aluminum
alloy 6063/HE9/T-6 and epoxy powder coated (color as per specifications) for surface
protection. Size to be 46x41x2T, Matching profile and color Nylon Polyamide-6 caps to
cover aluminum Poles, Self closing Hinges (Gravity mechanism) made from Nylon
Polyamide grade-6. Color to be as per specifications, Stainless steel grade 304 screws,
Anti-rotation Nylon polyamide grade-6 expandable wall plugs, etc complete.
Page 396
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2004 Cubical Toilet 51.165 Supply and installation of 12MM BOX UP cubicles of width and depth as per As directed by One Square 8634 321
specifications/ site drawings. Cubicle height to be 2100Titan Box up 18 mm Series Engineer-in-charge Metre
Cubicles: Std Sizes (W x D x H)- 900 mm x 1550 mm x 2100 mm, (Height is including
100 mm gap from bottom) Door Size- 600 mm mOne Metric Tonneitan Box up 18 mm
Series Cubicles: Std Sizes (W x D x H)- 900 mm x 1550 mm x 2100 mm, (Height is
including 100 mm gap from bottom) Door Size- 600 mmTitan Box up 18 mm Series
Cubicles: Std Sizes (W x D x H)- 900 mm x 1550 mm x 2100 mm, (Height is including
100 mm gap from bottom) Door Size- 600 mmITEM DESCRIPTION: Made from solid
grade Merino make compact high pressure laminate as per IS:2046 manufactured under
high specific pressure > 5 MPa and temperature >120°C, All doors will be of single colour
and made of 18 mm thick Merino HPL compact panel. All pilasters will be made of 18
mm thick Merino HPL compact panel. HARDWARE & ACCESSORIES are No head
frame structure, all panels to be aliengned to the top, Corner joinery section made from
Stainless steel grade 304. Surface finish to be brush type. A thin plastic film pasted for
surface protection. Size to be 35mmx15mmx0.8 mm. etc complete.
2005 Cubical Toilet 51.166 Supply and installation of cubicles of width and depth as per specifications/ site As directed by One Square 8324 331
drawings. Cubicle height will be 1980 mmTitan Std Series Cubicles: Std Sizes (W x D x Engineer-in-charge Metre
H): 900 mm x 1550 mm x 1980 mm/2039 mm ( Height is including 150 mm gap from
bottom) Door Size- 600 mm when top rail of rectangular cross section is used and 2039
mm when top rail of circular cross section is usedITEM DESCRIPTION Made from solid
grade Merino make compact high pressure laminate as per IS:2046 and EN-438
manufactured under high specific pressure > 5 MPa and temperature >120°C, All doors
will be of single colour and made of 12 mm thick Merino HPL compact panel. All
pilasters will be made of 12 mm thick HPL compact panel. Size of panels to be as per
drawing. HARDWARE & ACCESSORIES are Top rail is made of stainless steel grade
304. There are two options for the top rail. First one comes with a rectangular cross
section (Size to be 55mmx42mmx1.6 mmT) and the other one comes with circular cross
section (Diameter 32 mm). Surface finish to be brush type. A thin plastic film pasted for
surface protection. Corner joinery section made from Stainless steel grade 304. Surface
finish to be brush type. A thin plastic film pasted for surface protection. Size to be
35mmx15mmx0.8 mm. etc complete.
Page 397
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2006 Cubical Toilet 51.167 Supply and installation of ZMS (Nylon) cubicles of width and depth as per specifications/ As directed by One Square 5909 321
site drawings. Cubicle height will be 2003 mm. ZMS Series Cubicles: Std Sizes (W x D x Engineer-in-charge Metre
H): 900 mm x 1550 mm x 2003 mm, (Height is including 150 mm gap from bottom) Door
Width- 600 mmITEM DESCRIPTION Made from solid grade compact high pressure
laminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa
and temperature >120°C. All doors will be of single colour and made of 12 mm thick HPL
compact panel. All pilasters will be made of 12 mm thick HPL compact panel. All
intermediate partitions or dividers will be made of 12 mm thick HPL compact laminate
panels. Size of panels to be as per drawing. HARDWARE & ACCESSORIES are Semi-
spherical (Top) head frame structure for surface protection. Size to be 50x32x1.6T.
Corner joinery section, Size to be 40x16.5x1.8T.U-Channel Wall joinery section, Size to
be 22x16x1.6T.Door stopper section, Size to be 21x12.5x1.6T. Stainless steel grade 304
screws, Anti-rotation Nylon polyamide grade-6 expandable wall plugs, The Work shall
complete as per drawing , under supervision of engineer in charge, etc complete.
2007 51.168 MORTH 602 Steel Fiber Reinforcement: Supplying, Providing and Mixing Hooked End/Crimped steel MORTH 602.2.5 One Kilogram 112 0
fibers with aspect ratio between 50 to 80 (Diameter between 0.45 to 01mm and length AND IRC:SP:46
between 12.5 to 60mm) manufactured from cold drawn wire and having a minimum
tensile strength of 1100N/Sq.mm, as per CE Certification label mark, HE non-glued/ HE
glued, non-balling, conforming to ASTM A 820 /EN 14889-1, compatible with all
construction chemicals used for the batching, laying and curing of concrete. The fibers
shall be added to the concrete at specified dosage and shall be mixed with the concrete
ingredients for sufficient time to ensure uniform distribution and pumping concrete.
Addition of steel fibers in cement concrete for flooring/ pavement/CC roads (All ground
supported slab)/underground structure/precast items (like drains, manhole covers, walls,
paver blocks, pipes, tunnel segments) etc. doses as per approved designs and directions of
Engineer-in-Charge. HSN Code for Steel Fibres is 73170013. Regularly used are MSCF
50; MSH 10050; MSH 7560; MSH7035; MSH 6035; MSH 5530; NSH-G 7560; MSH-G
7035; MSH-G 6035; MSH-G 5530 etc. are some of the widely used sizes.
Door and 51.169 BD-T Fire Door 55mm 2HR FRL (120/120) 3 Criteria - INTEGRITY / INSULATION/ As directed by
Windows STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2. Engineer-in-charge
Page 398
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Providing of 120 min Fire rated doors system duly tested for 3 criteria - Integrity,
Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 at National
Test House, Govt of India laborator and/or with Central Building Research Institute, Govt
of India undertaking with standard heating conditions as specified in IS:3614 Part II 1992
and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability
(i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of
140° C above the ambient temperature on the exposed surface of the shutter. The fire
doors are tested with NCBN technology ("Non Combustible by Nature").
2008 a) Door Frame: Supplying & Fixing frames for Fire resistant door shutters 1st class One Running 1839 540
Malaysian Hardwood Frame densified (810 Kilogram/cum) and pressure treated with fire Metre
retardant chemicals in vacuum impregnation vessel under 160 psi pressure as per
IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 70 mm
spray quoted with 2 coats of intumescent paint of minimum 200 micron, with single row
of Brush- Type ASTROFLAME intumescent strip of size 10mm x 4mm affixed in the slit
of the Frame for fire and smoke sealing, etc. complete.
2009 51.170 b)Shutter : Supplying & Fixing of 55mm thick asbestos free criteria checked - fire, heat One Square 10604 2738
and smoke resistant composite Fire check Door Shutter complying with with fire Metre
performance - FD 120 as per IS:3614 (part - II) comprising of 2x8mm Calcium Silicate
boards over Chemically treated (with Fire retardant chemicals in vaccum pressure
impregnation vessels under 160 psi pressure as per IS:401 and kiln seasoned to moisture
below 15% as per IS:1141) internal timber (Malaysian Hard Wood, densified to 810
Kilogram/cum) frame work of 100x32 mm with 32mm thick infill of ceramic fiber
(density 128 Kilogram/cum), vermaculite mix faced with 3mm Fire retardant High
Density fibre board, internally lipped with hardwood beading and pasted in Hydraulic
Press under 25 MPa, spray quoted with 2 coats of in-tumescent paint of minimum 300
micron, and with single row of Brush- Type intumescent strip of size 10mmx4mm affixed
on periphery for fire and smoke sealing in the slit on all edges of shutter except bottom,
without any external lipping.
Page 399
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Door and BD-T Providing of 2 Hour Rated Acoustic Fire Door to effectively control noise in conference As directed by
Windows rooms, broadcasting studios, theatres and music practice rooms. duly tested for 3 criteria - Engineer-in-charge
Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22
with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20
& 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the
heat radiation, temperature rise on the non fire side to the maximum of 140° C above the
ambient temperature on the exposed surface of the shutter. The accoustic fire doors are
tested with NCBN technology ("Non Combustible by Nature") duly tested for sound
insulation as per ISO 10140-2 / ASTM E 90 for sound transmission loss evaluation of
42db in reverberation chamber at ARAI.
2011 51.172 a)Door Frame: Providing & Fixing Frames for Fire resistant door shutters 1st class One Running 1936 540
Malaysian Hardwood Frame densified and pressure treated with fire retardant chemicals Metre
in vacuum impregnation vessel under 160 PSI pressure as per IS:401and kiln seasoned to
moisture below 15% as per IS:1141 of section 120 X 70 mm spray quoted with 2 coats of
In tumescent paint of minimum 200 micron, with 1 row of Brush- Type Astroflame®
intumescent strip (imported) of size 10mmx4mm concealed in the groove of the Frame for
fire and smoke sealing, etc. complete as per direction of Engineer in Charge
2012 51.173 b)Shutter: Supplying & Fixing of 75mm thick asbestos free, fire, heat and smoke resistant As directed by One Square 15374 2738
composite Acoustic Door Shutter complying with with fire performance - FD 120 as per Engineer-in-charge Metre
IS:3614 (part - II) comprising of 2x12mm Calcium Silicate boards over Chemically
treated (with Fire retardant chemicals in vaccum pressure impregnation vessels under 160
psi pressure as per IS:401 and kiln seasoned to moisture below 15% as per IS:1141)
internal timber (Malaysian Hard Wood, densified to 810 Kilogram/cum) frame work of
100x36 mm with 36mm thick infill of ceramic fiber (density 128 Kilogram/cum),
vermaculite mix faced with 6mm Fire retardant High Density fibre ply, internally lipped
with hardwood beading and pasted in Hydraulic Press under 25 MPa, spray quoted with 2
coats of in-tumescent paint of minimum 300 micron, and with single row of Brush- Type
intumescent strip of size 10mmx4mm affixed on periphery for fire and smoke sealing in
the slit on all edges of shutter except bottom and placement of 3 mm thick rubber
membrane, at the inside face, sandwitched between calcium silicate board & high density
fire retardant ply, without any external lipping with triple rebatting in shutters, etc
complete. Providing of Fire Barrier Systems to prevent the spread of fire and smoke
within roof and ceiling voids.
Page 400
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2013 Door and 51.174 BD-T Fire Barrier: As directed by One Square 10453 1277
Windows Providing 100mm thick asbestos free composite - 3 criteria - fire, heat and smoke check Engineer-in-charge Metre
Fire Barrier to prevent the spread of fire and smoke within roof and ceiling voids with
flame guard of 120 minutes as per IS: 3614 part -II comprising of 4 x 12mm thick
Calcium Silicate boards, Chemical treated internal timber with Fire retardant chemicals in
pressure impregnation vessels under 160 PSI pressure as per IS:401and kiln seasoned to
moisture below 15% as per IS:1141 frame work of 50mm x 100 mm with 50mm thick
infill of ceramic fiber (density 96Kilograms/CMT), vermaculite mix reinforced by MS
8mm bars supported within the existing structure & sealed with fire retardant Poly
Urethane foam. All empty spaces will be filled with ceremic wool as per instruction of the
engineer.
2014 Door and 51.175 BD-T Panic Bar: (For 2 Hr fire Rated single Panic bar) As directed by One Number 10189 1523
Windows Supplying, fitting & fixing Surface mounted Crash Bar/ panic Bar of touch pad style Engineer-in-charge
,made of heavy duty cast iron/ steel body & latches with SS ,BHMA certified &
conforming to ANSI A 156.3 for grade-1 ( 3 hours fire rated ) and suitable for surface
mounting to wooden/hollow metal/ Al framed door,with maximum operating force
8Kilogram for unlocking easily & outwardly during emergency,complete in all respect as
per direction & satisfaction of Engineer-in charge including all taxes & incidental charges.
(Note: To be installed at "FIRE EXIT"only under location specific instruction of
Eingineer-in -Charge.)
2015 Door and 51.176 BD-T Door Closure: (For 2 Hr fire Rated EN-3 Door Closure) As directed by One Number 3908 406
Windows Supplying, fitting & fixing Surface mounted overhead Door Closer for 2 hour fire rated Engineer-in-charge
doors of different size (e.g size -EN-3 for leaf width upto 900mm) CE certified, marked &
conforming to EN - 1154 of approved quality (Internationally reputed brand like Dorma,
Geze, Hafele, Assabloy & Magnum etc.) fitted and fixed Complete as per direction &
satisfaction of Engineer -in Charge including all taxes & incidental charges.
2016 Door and 51.177 BD-T 12"SS Handle: (For 2 Hr fire Rated 12"SS Handle) As directed by One Number 2041 271
Windows Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Engineer-in-charge
Handle with Grade 304, CE certified, marked & conforming to EN - 1154 of approved
quality (Internationally reputed brand like Dorma, Geze, Hafele, Assabloy & Magnum
etc.)as per direction of Eingineer -in Charge fitted and fixed complete including all taxes
& incidental charges.
Page 401
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2017 Road works 51.178 Rd Providing and laying White Topping as per IRC-SP 76-2015 over bituminous surface As directed by One Cubic Metre 7424 37
(Existing bituminous surface preparation to be done if necessary either by milling or Engineer-in-charge
levelling course with BM/DLC to correct surface profile and to be paid separately) with AND IRC:SP 76-
unreinforced M-40 grade Pavement Quality Concrete using Ordinary Portland Cement 2008
(OPC 43/OPC 53-Grade) at 357kg/cum and 105 kgs of Fly Ash (Replacement of Fly Ash
to the extent of 15% and Fine aggregate by 10%) coarse aggregate, fine aggregate and
Admixture confirming to IS 9130-1999 (R-2004) polymeric synthetic fibre as per ASTM
(1116) such as polyester / polyethylene / polypropylene / Glass fibre at 1.20 kg/cum,
mixed in batching and mixing plant or weigh batcher as per approved mix design to
achieve minimum flexural strength or modulus of rupture of concrete 4.50 MPa at 28 days
limiting maximum water cement ratio to 0.40, transported to site, laid with mechanical
paver finisher, spread, vibrated, compacted and finished in a continuous operation to the
lines and grades as per drawing, texture finishing of surface, spraying two layers of curing
compound, curing with water sprayed on hessian cloth covered over concrete surface,
groove cutting grid 1m x 1m to a depth of 1/3 of the Thickness and of width 3-5 mm as
per design including cost of all material, side form work, sealing joints labour and HOM
of machineries etc. complete as per specifications..
2018 Road Furniture 51.179 Rd Standard Metal Delineator IRC 79:1981 One Number 1352 378
Supply and Installation of Road delienators ( Road way Delienators ) as per MORT&H
clause 806.The structure shall be manufactured in roll forming process and shall have
height not less than 800 mm above the ground, width not less than 100 mm and shall
extend not more than 300mm below the ground while being installed in confirmation with
IRC:79 1981or as directed by engineer in charge.The delineator shall be painted with
powder coat of minimum 40 microns thickness for protection against corrosion, on top of
which Type XI retro reflective sheeting shall be pasted on both sides. The delienator shall
consist minimum retro reflective unit exposed area of 330 cm2 white color, full cube
corner micro prismatic non-metallic retro reflective sheeting on each side conforming with
IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956
Type XI table specification.The front and back faces of the delineator should be curved
with a radius of not more than 200 mm and with delta angle (or central angle of curve)
lying between 20o and 30o, to increase the visibility of the delineator for vehicles moving
in continuous curves. The delineator shall have grooves across the length to make the
reflective sheets vandal-proof.
Page 402
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2019 Road Furniture 51.180 Rd Flexible Median Marker IRC 67:2012 One Number 405 0
Supply and Fixing of Flexible Median Marker which shall be made of tough, high impact
resistant, injection-molded, thermoplastic body with U shape structure with overall height
of minimum 180mm and shank depth of minimum 30mm and thickness not less than
2mm. The exposed body structure should be cornered rounded for better aesthetics. The
plastics used for the molding the flexible median marker shall have a minimum notched
Izod Impact strength value of 4.11J/cm (@thickness 3.17mm) at room temperature, tested
in accordance with ASTM D256. The outer part of the body shall have the Abrasion loss
not less than 35 mm3 when tested accordance with DIN53505 and DIN53516 respectively
and shall retain at least 70% of this value when it is subjected to accelerated weathering
for 500hrs as per the ASTM G155 standard. . The logo of the manufacturer shall be
embossed on either side of the body in the injection molding process. - The flexible
median marker shall have U shaped florescent yellow color retro-reflective sheeting with
minimum exposed reflective area 285 mm2. The reflective sheeting should confirm to
Type XI Florescent Yellow sheeting as per IRC 67 2012 and ASTM D4956-11. The
product design has to with stand all natural impacts and should not get damaged if any
pedestrian stamp on top of it intentionally or unintentionally. The product should bend up
to 90 degree on both sides (becoming completely horizontal), it should be able to take
minimum 200 stamping without any significant damage. The Flexible Median Marker
shall be fixed by a combination of epoxy adhesive and grouting/Drilling as per Engineer
IN Charge
2020 Road works 51.181 BITUMNOUS CONCRETE :- Providing and laying Bituminous concrete using crushed As directed by One cubic meter 12770 80
stone aggregates of specified grading, premixed with HIMA Grade bituminous binder like Engineer-in-charge
ART (Highly Modified Asphalt Binder having not less than 90°C Softening Point and not
less than 90% Elastic Recovery) @ 5.4% (percentage by weight of total mix) and lime
filler @ 2% (percentage by weight of Aggregate) prepeared in Batch Type Hot Mix Plant
and filler, transporting the hot mix to work site by tippers, laying with paver finisher
equiped with electronic sensor to the required grade, level and alignment and rolling with
smooth wheeled, vibratory and tandem rollers to achieve the desired 40/50 mm compacted
thickness and density as per specification, complete and as per directions of Engineer-in-
Charge.
2021 51.182 Providing, Supplying, Laying & Fixing of concrete Canvas 5mm thick (flexible concrete As directed by One Square 4404 71
impregnated fabirc which hardens when hydrated to form thin, durble, water proof & fire Engineer-in-charge Meter
resitant concrete layer within 24 hrs) for slope protection/drain lining/concrete repair
works and other similar works complete in all respect and as per direction of engineer-in-
charge. Special Condition 1) Contractor shall submit all relevant test certificates of the
material. 2) Mass of unset concrete canvas should be 7Kilogram/ One Square Metre. 3)
Width of roll should be 1 m.
Page 403
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2022 51.183 Providing, Supplying, Laying & Fixing of concrete Canvas 8mm thick (flexible concrete As directed by One Square 6153 67
impregnated fabirc which hardens when hydrated to form thin, durble, water proof & fire Engineer-in-charge Meter
resitant concrete layer within 24hrs) for slop protecion/drain lining/concrete repair works
and other similar works complete in all respect and as per direction of engineer-in-charge.
Special Condition 1) Contractor shall submit all relevant test certificates of the material.
2) Mass of unset concrete canvas should be 12Kilogram/ One Square Metre. 3) Width of
roll should be 1.1m.
2023 51.184 Providing, Supplying, Laying & Fixing of concrete Canvas 13mm thick (flexible concrete As directed by One Square 7695 95
impregnated fabirc which hardens when hydrated to form thin, durble, water proof & fire Engineer-in-charge Meter
resitant concrete layer within 24hrs) for slopw protecion/drain lining/concrete repair
works and other similar works complete in all respect and as per direction of engineer-in-
charge. Special Condition 1) Contractor shall submit all relevant test certificates of the
material. 2) Mass of unset concrete canvas should be 19Kilogram/ One Square Metre. 3)
Width of roll should be 1.1m.
2024 51.185 Providing, Supplying, Laying & Fixing of concrete Canvas hydro 5mm thick (flexible As directed by One Square 6452 52
concrete impregnated fabirc which hardens when hydrated to form thin, durble, water Engineer-in-charge Meter
proof & fire resitant concrete layer within 24hrs) for slopw protecion/drain lining/concrete
repair works and other similar works complete in all respect and as per direction of
engineer-in-charge. Special Condition 1) Contractor shall submit all relevant test
certificates of the material. 2) Mass of unset concrete canvas should be 8Kilogram/ One
Square Metre. 3) Width of roll should be 1m.
2025 51.186 Providing, Supplying, Laying & Fixing of concrete Canvas hydro 8mm thick (flexible As directed by One Square 11066 66
concrete impregnated fabirc which hardens when hydrated to form thin, durble, water Engineer-in-charge Meter
proof & fire resitant concrete layer within 24hrs) for slopw protecion/drain lining/concrete
repair works and other similar works complete in all respect and as per direction of
engineer-in-charge. Special Condition 1) Contractor shall submit all relevant test
certificates of the material. 2) Mass of unset concrete canvas should be 13Kilogram/ One
Square Metre. 3) Width of roll should be 1m.
Page 404
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2026 Building Roofing 51.187 Supply and Installation of translucent roof with DPI Flux standing seam multicell As directed by One Square 3971 481
polycarbonate panel system. The system with complete assembly of co extruded UV Engineer-in-charge Metre
protected multicell panels incorporated into a complete system. Co-extruded UV protected
polycarbonate panel system of min 12 mm thick of 900 mm (min.) width with angular
daylighting concept. Panels shall have minimum six layers with truss bridge design for
higher flexibility & strength. Panels with all fixing accessories to ensure best performance
for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured
with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with
snap on connectors with double tooth grip lock locking mechanism and will be secured on
MS structure (will be paid Separately) with 3 One Numbers self-drilling screws &
trapezoid SS fasteners holding the base of the standing seam offering best stability having
a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as
per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall
show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a
min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per
ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per
ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018.
Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as
required. Panel shall be fixed over MS structural steel/MS purlin (paid separately)
conforming to the detail technical specifications as per approved architectural drawings.
Trained and factory authorized labour with supervision to complete the entire panel
installation as per drawing & direction of the engineering in charge. Colour: As per
Approval. Approved Make: FLUX by DPI Daylighting or approved equivalent The 12mm
thick panels shall be used for a roofing height of upto 15 mtrs.
Page 405
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2027 Building Roofing 51.188 Supply and Installation of Dpi Flux translucent roof with standing seam multicell As directed by One Square 5025 481
polycarbonate panel system. The system with complete assembly of co extruded UV Engineer-in-charge Metre
protected multicell panels incorporated into a complete system. Co-extruded UV protected
polycarbonate panel system of min 16 mm thick of 1200mm (min.) width with angular
daylighting concept. Panels shall have minimum seven layers in a truss bridge design for
higher flexibility & strength. Panels with opaque and translucent clear combination as per
required lux level and design requirements with all fixing accessories to ensure best
performance for wind uplift, vibration, oil canning and visual appearance. Panels shall
have an additional IR Blocking features for enhance thermal comfort. Panels shall be
manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed
on Purlin with snap on connectors with double tooth grip lock locking mechanism and
will be secured on MS structure (will be paid Separately) with 3 One Numbers self-
drilling screws & trapezoid SS fasteners holding the base of the standing seam offering
best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998
and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as
per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been
exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have
Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to
UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.9 W/m2K as per
EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/
Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin
(paid separately) conforming to the detail technical specifications as per approved
architectural drawings. Trained and factory authorized labour with supervision to
complete the entire panel installation as per drawing & direction of the engineer in charge.
Colour: As per approval The 16mm thick panels shall be used for a roofing height of upto
15 mtrs.
Page 406
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2028 Building Roofing 51.189 Supply and Installation of Dpi Flux translucent roof with standing seam multicell As directed by One Square 5444 481
polycarbonate panel system. The system with complete assembly of co extruded UV Engineer-in-charge Metre
protected multicell panels incorporated into a complete system. Co-extruded UV protected
polycarbonate panel system of min 18 mm thick of 1200mm (min.) width with angular
daylighting concept. Panels shall have minimum seven layers in a truss bridge design for
higher flexibility & strength. Panels with opaque and translucent clear combination as per
required lux level and design requirements with all fixing accessories to ensure best
performance for wind uplift, vibration, oil canning and visual appearance. Panels shall
have an additional IR Blocking features for enhance thermal comfort. Panels shall be
manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed
on Purlin with snap on connectors with double tooth grip lock locking mechanism and
will be secured on MS structure (will be paid Separately) with a continuous aluminium I
Beam holding the base of the standing seam along the length of the panel & fixed with
purlin with self-drilling hex head screws offering best stability with a pull-out load of min.
21000N (21KN) tested as per ISO 6892:1998 and IS 1608: 2005., as per design
requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no
sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of
500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D
1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G
155. U value shall not be more than 1.9 W/m2K as per EN ISO 10077-2:2018. Panel shall
be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required.
Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to
the detail technical specifications as per approved architectural drawings. Trained and
factory authorized labour with supervision to complete the entire panel installation as per
drawing & direction of the engineer in charge. Colour: As per approval. The 18mm thick
panels shall be used for a roofing height of upto 25 mtrs
Page 407
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2029 Building Roofing 51.190 Supply and Installation of Dpi Flux translucent roof with standing seam multicell As directed by One Square 6119 481
polycarbonate panel system. The system with complete assembly of co extruded UV Engineer-in-charge Metre
protected multicell panels incorporated into a complete system. Co-extruded UV protected
polycarbonate panel system of min 22 mm thick of 1200mm (min.) width with angular
daylighting concept. Panels shall have minimum seven layers in a truss bridge design for
higher flexibility & strength. Panels with opaque and translucent clear combination as per
required lux level and design requirements with all fixing accessories to ensure best
performance for wind uplift, vibration, oil canning and visual appearance. Panels shall
have an additional IR Blocking features for enhance thermal comfort. Panels shall be
manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed
on Purlin with snap on connectors with double tooth grip lock locking mechanism and
will be secured on MS structure (will be paid Separately) with a continuous aluminium I
Beam holding the base of the standing seam along the length of the panel & fixed with
purlin with self-drilling hex head screws offering best stability with a pull-out load of min.
21000N (21KN) tested as per ISO 6892:1998 and IS 1608: 2005., as per design
requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no
sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of
500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D
1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G
155. U value shall not be more than 1.9 W/m2K as per EN ISO 10077-2:2018. Panel shall
be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required.
Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to
the detail technical specifications as per approved architectural drawings. Trained and
factory authorized labour with supervision to complete the entire panel installation as per
drawing & direction of the engineer in charge. Colour: As per approval The 22mm thick
panels shall be used for a roofing height of upto 55 mtrs.
Page 408
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2030 Building 51.191 Providing and applying two coats of Hues Surface Coatings Clear Coat (Stone-X ) with As directed by One Square 282 155
silicon technology on stones, clay tiles, bricks, facades,sand stone,plastered,texture Engineer-in-charge Metre
finished interior or exterior surfaces.(It is tested with standand test method One
NumberIS15489:2004 & Low VOC as per ASTM D2369/ISO 11890-1 and water vapour
permeability as per ASTM D-1653/ISO 7783).Surface preparation includes cleaning and
scrubbing with brush,soap and water to remove all dust, fungus,cement, paints
etc,washing with water all complete.The coating thickness and the methodology of
application shall strictly as per manufacturer's specifitions and as approved by engineer in
charge.The contractor shall give guarantee for the performance of coating for water
repellency and also the durabitity of coating, all complete as per direction of Engineer - in-
incharge.
2031 Building 51.192 Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface. RCC As directed by One Square 8598 188
pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc. of cladding Engineer-in-charge Metre
processed stone with material of Processed clay, Wooden chips, Silica sand, Cement,
GFRC admixtures, Colour pigments, Fiber up to thick of 230 mm/ 25 mm including
scaffolding, fixing of screw, etc. (As directed by Engineer in Charge)
2032 Road 51.193 FRP Beam Crash Barrier -- Type - A, W : FRP Beam Crash Barrier (Providing and As directed by One Running 3377 409
erecting a W "FRP beam crash barrier comprising of 3 mm thick corrugated sheet FRP Engineer-in-charge Metre
beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150
x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all
steel parts and fitments to be galvanised by hot dip process, all fittings to conform to
IS:14856 (2000) and IS:18319 (2015), FRP beam rail to be fixed on the vertical post with
a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810)"
As directed by Engineer incharge.
2033 Road 51.194 FRP Beam Crash Barrier -- Type - B, THRIE : FRP Beam Crash Barrier (Providing and As directed by One Running 4867 523
erecting a Thrie " FRP beam crash barrier comprising of 3 mm thick corrugated sheet FRP Engineer-in-charge Metre
beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150
x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all
steel parts and fitments to be galvanised by hot dip process, all fittings to conform to
IS:14856 (2000) and IS:18319 (2015), FRP beam rail to be fixed on the vertical post with
a space of channel section 150 x 75 x 5 mm, 546 mm long complete as per clause 810)"
As directed by Engineer incharge.
Page 409
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2034 Building 51.228 As directed by Providing and fixing in position various capacity rainwater harvesting dual intensity auto As directed by
Engineer in charge flush open ended at drain outlet filter with working principal of COHESSIVE AND Engineer in charge
CENTRIFUGAL FORCE having filter element made out of S.S. 304 screen with mesh
size of 205 microns having rainfall capacity of 75 m/hr intensity with operating pressure
of 0.060Kilogramper sq.cm. of Head with discharge capacity ranging from 10 to 480
lit/min including all necessary accessories like coupler,bends,PVC valve,etc fixing with
Bombay nails of required length etc. complete with inlet size of 90 mm to 110 mm
diameter from rooftop pipe with drain outlet of 90 mm to 110 mm diameter size with
clean water outlet of 62 mm to 90 mm diameter size including fitting and fixing excluding
inlet and outlet piping etc complete as per the direction by engineer in charge.
2035 Building 51.228.a As directed by FL-100 for the catchment up to 110 sq.m. system size 90 mm diameter inlet, 63 mm As directed by One Number 7203 2000
Engineer in charge diameter clean water outlet, 90 mm diameter drain outlet (filterain,tee,door bend, valve Engineer in charge
63mm)
2036 Building 51.228.b As directed by FL-150 for the catchment up to 150 sq.m. system size 90 mm diameter inlet, 75 mm As directed by One Number 9746 2500
Engineer in charge diameter clean water outlet, 90 mm diameter drain outlet (filterain,tee,door bend, valve Engineer in charge
63mm)
2037 Building 51.228.c As directed by FL-200 for the catchment up to 225 sq.m. system size 110 mm diameter inlet, 75 mm As directed by One Number 10381 3000
Engineer in charge diameter clean water outlet, 90 mm diameter drain outlet (filterain,tee,door bend, valve Engineer in charge
75mm)
2038 Building 51.228.d As directed by FL-300 for the catchment up to 350 sq.m. system size 110 mm diameter inlet, 90 mm As directed by One Number 14195 3500
Engineer in charge diameter clean water outlet, 90 mm diameter drain outlet (filterain,tee,door bend, valve Engineer in charge
90mm)
2039 Building 51.228.e As directed by FL-500 for the catchment up to 500 sq.m. system size 110 mm diameter inlet, 90 mm As directed by One Number 20275 4000
Engineer in charge diameter clean water outlet, 110 mm diameter drain outlet (filterain,tee,door bend, valve Engineer in charge
90mm)
Page 410
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2040 Surveying 51.229 As directed by To carry out linear Drone survey agencies will use fully autonomous professional survey As directed by Running One 8500 0
Engineer in charge grade drone and in post process for aerial triangulation required ground control points and Engineer in charge Kilometre
benchmarks will be collected by using survey grade dual frequency DGPS-PPK system.
After post processing agency will deliver following final output.
1.Geotagged images in JPG format with resolution of 4-5cm/pixel with 70% overlap
2. GCP values in .CSV format.
3. 3D point cloud cover in .las format.
4. digital surface model (DSM) in .tiff format.
5. 2D orthorectified images in .t iff format with 5 cm resolution which gives capability to
capture detailed features.
2041 Surveying 51.229a As directed by To carry out polygon Drone survey agencies will use fully autonomous professional As directed by Square One 22500 0
Engineer in charge survey grade drone and in post process for aerial triangulation required ground control Engineer in charge Kilometre
points and benchmarks will be collected by using survey grade dual frequency DGPS-PPK
system. After post processing agency will deliver following final output.
1.Geotagged images in JPG format with resolution of 4-5cm/pixel with 70% overlap
2. GCP values in .CSV format.
3. 3D point cloud cover in .las format.
4. digital surface model (DSM) in .tiff format.
5. 2D orthorectified images in .t iff format with 5 cm resolution which gives capability to
capture detailed features.
2042 Surveying 51.230 As directed by Scanning, Digitisation and Geo-referencing of cadastral /revenue maps and interpretation As directed by Square One 4000 0
Engineer in charge of all existing features like building, water bodies, rivers, agricultural field etc to Engineer in charge Kilometre
generate base map. Creation of GIS platform by using orthorectified image and revenue
data by Linking of textual data(7/12) which special data( Vector digitised maps). All will
helps to analyse and identify all affected properties.
Page 411
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2043 Ceiling and 51.231 As directed by FALSE CEILING SYSTEM GI METAL BIOGUARD CLIP IN PLAIN TILE WITH As directed by One Square 2457 237
roofing Engineer in charge CARRIER SYSTEM 600 X 600MM Engineer in charge Metre
Providing & Fixing horizontal level suspended ceiling comprising of GI Bioguard Clip-in
Plain Tile 600x600mm (Nominal Size) tiles of 120 gsm galvanized steel as per IS 277
(2003) suitable for architectural finishes in 0.5mm thickness as per in IS:513 (1994) in
Global white color with concealed suspension system having a bevelled edge of 3x3mm
and height of 33mm on one side and 18mm on the other side. Tiles shall be flattened by
precision leveller to minimize sag to less than 1/400mm. The tiles shall have double round
pip of ɸ 2mm and ɸ 6mm for secure engagement and levelling respectively, along with
swing down feature and special tabs to allow removal of tile to enable plenum access. The
coated surface of the tile shall exhibit anti-microbial properties (eradication and inhibition
of growth) and shall achieve up to 99.99% reduction in bacterial activity as per
ISO22196:2011. The tile shall be electrostatically polyester powder coated using RoHS
compliant powder having coating thickness ranging from 60-80 microns. The powder
coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for
1000hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000hours as per DIN
50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The
shade variation across batches shall be delta E<1 using Excite/BYK Gardner instrument
and gloss level of 25±5% at 60˚ as per ASTM D523. The tile shall have scratch, mar &
abrasive resistance properties. The tile shall have a Light Reflectance of ≥ 63% in
accordance to ASTM 1477-98 and Fire Performance of class 0/1 as per BS 476 Part 6 & 7
in module size of 600x600mm.
SUSPENSION & INSTALLATION: Shall comprise of 3000mm long ‘C’ channels of
38H x 12W mm and 1mm thick spaced at 1200mm centre to centre securely fixed to the
structural soffit using threaded rod (Approved make/Third Party Supply) connecting to C-
channel hanger of 109x18.5x16.5mm at 1200mm C/C and anchor fastener (Approved
make/Third Party Supply). The last hanger at the end of each C-channel shall not be
greater than 600mm from the adjacent wall. Use a C-channel connector of 99.5x35x 9mm
for splicing together two pieces of C-channels. 4000mm Clip-in bar of 16W x 40H mm
and 0.6mm thick made of galvanized steel of 140gsm as IS 277 (2003) and shall be
Page 412
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2044 Ceiling and 51.232 As directed by ACOUSTICAL WALL PANELLING – FABRIC WRAPPED OF SIZE: As directed by One Square 6645 0
roofing Engineer in charge 600X600/1200X25MM Engineer in charge Metre
Providing and Fixing of Acoustical Wall Panel with square edges made of fibre glass
substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as
per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium,
Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-
84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm
(Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient
readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM
C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers
(supplied by the manufacturer) or by using construction adhesives (as per the instructions
laid down by the manufacturer). The fibre glass substrate shall have a recycle content of
85%. Installation:An appropriate vapour barrier (by others) shall be applied/installed on
the vertical surface before the installation to properly seal against entry of any moisture.
Vapour barrier (by others) shall be installed as per Manufacturer’s recommendation.
Install wooden batten grid (provided by others) of section 50x50mm or as approved by the
Architect on the solid wall/partition to provide level and plumb surface. The Impalers shall
be fixed to the battens using self-tapping screws, 3 nos. in case of 600x600mm and 4 nos.
in case of 600x1200mm. Silica based construction adhesive (by others) to be dabbed on to
the projecting elements (spikes) of the Impalers. Wall Panels shall be pierced through the
spikes of the Impalers ensuring the line and level of the panels are maintained
Page 413
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2045 Ceiling and 51.233 As directed by CHANNELLED WALL PANELLING OF SIZE: 192X2400X15MM As directed by One Square 5001 0
roofing Engineer in charge Providing and Fixing Channelled perforated panels of width 192mm, thickness of 15mm Engineer in charge Metre
and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated
facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique
Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse
side. The boards shall have a special perforation pattern where the reverse surface has a
“Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 13mm or
21mm of visible pane (G-13/ G-21). The edges of the panel shall be “tongue-and-
grooved” to fix special clips for installation and seamless visual. The back of the
perforated panel shall have sound absorbing non-woven Soundtex acoustical fleece hot
pressed to achieve NRC of 0.5. for G-21 and 0.6 for G-13. (Average value of Absorption
Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423
and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and
bow less than 1mm/300mOne Metric Tonnehe panels shall be mounted on special
aluminium splines (keel) using inside clips provided by Manufacturer and approved by the
Architect/ Engineer-in-Charge.
2046 Installation: An appropriate vapour barrier (by others) shall be applied/installed on the
vertical surface before the installation to properly seal against entry of any moisture.
Vapour barrier (by others) shall be installed as per Manufacturer’s recommendation.
Install wooden batten grid (provided by others) of section 50x50mm or as approved by the
Architect on the solid wall/partition to provide level and plumb surface for fixing Keel.
Install Keel vertically using screws and plugs at spacing of not more than 600mm centre-
to-centre. The first and last keel should not be more than 150mm from the ends. Trim the
tongue of the first bottom panel and install using headless nail with groove side upward.
Subsequent panels are installed with tongue side downward by engaging with each other
using tongue and groove mechanism and secured by inside clip. Continue this process
until required height is achieved. Shorter butt edges need to be joined using
industrial/wood glue. The keel shall also be used for transition of the butt end of adjacent
panel at every 7.2m. Install the Skirting (provided by others) of width 50mm or more as
required by the Architect/ Engineer-in-Charge. Finish off the edges using wooden
moulding of matching colour (by others). Installation should be carried out as per
Manufacturer recommended procedure.
Page 414
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2047 Ceiling and 51.234 As directed by Providing & Fixing Of Classic Axiom Perimeter Trim with 19mm face for perimeter As directed by One Running 1229 0
roofing Engineer in charge solution of acoustical ceiling using appropriate Accessories Classic Vector Axiom Engineer in charge Metre
(AX4VESTRI/ AX4VECURI xx) to offer perimeter solution with acoustical ceiling
system. Classic Vector Axiom (AX2STR42I/ AX2CUR42Ixx) is made of extruded
aluminum of O/L dimension of 19.3 x 100 x 3000mm. The inverted F- Shape section
provides 2 flanges and 19mm face for resting of tiles. Classsic Axiom must be powder
coated in Global White. Profile to have engineered design boss for fitment of Tee bar
connector, Splice plate Corner connector & hanger clips. Classic Axiom ( AX4VECURI
xx) can be curvered to a minumum radius of 600mm Axiom Splice Plate
(AX4SPLICEI/AXSPLICEI): Formed to fit into special boss in the Axiom and locked in
place with factory-installed screws. These Steel splice plates (AX4SPLICEI) are used to
align and secure all joints between sections of Axiom trims. Corners are to be formed by
mitering the end of axiom and splice plate (AXSPLICE) to be bent at right angle for
connecting the end pieces. Axiom Tee-Bar Connection Clip (AXTBCI): Commercial
quality G.I formed to fit into special boss of trim and locked in place by factory-installed
screws and attached to (XL-24 / XL-15/Silhouette) suspension system members. T-Bar
connection clips are used to attach the Axiom to the supporting Suspension system
members. One clip is required at each location where the grid system intersects the Axiom
trim. Hanging Grid clips (AXHGCI): Axioms to be hung independently to the structural
soffit by engaging the Hanging Grid Clip into the boss of the Axiom trim channel and
securing it to structural soffit Suspension . INSTALLATION: Hang the sections of Axiom
Trim onto the grid system by engaging the top ear of the connection clip under the boss of
the channel trim. Slide the lower leg downward to engage the lower boss on the trim and
secure by tightening the locking screw. Complete the installation of all channel trims
sections. Install and secure the splice plates, corner pieces, and alignment plate’s etc.
Make adjustments as necessary to properly align the complete installation.
Page 415
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2048 Furniture 51.235 As directed by Supply, fixing and installation of 4mm thick Aluminium Composite Panel (ACP) of As directed by One Square 3347 646
Engineer in charge approved colour for external cladding in combination of solid and metallic colours, Engineer in charge Metre
including all necessary Framework, support and complete weather sealing as per
architectural drawing. The Aluminium Composite Panel (ACP) should be made out of
thermoplastic core of low-density polyethylene LDPE (100% virgin mix), sandwiched
between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50
mm thick, total thickness of aluminium composite panels not to be less than 4 mm, the
exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2)
micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per
architectural design. The inside surface (facing the building exterior surface)shall have
polyster based powder coating not less than 25 Micron with protective peel-off foil on the
exterior face (peel off film will in no case leave any adhesive mark over the composite
panel surface after it is peeled off). The supporting framework shall be made out of 50
mm X25mm X 3mm thick Aluminium section to be spaced horizontally and vertically for
fixing of panel of size 900 mm X 1200 mm and fixed to the building structure as per
design through 50mm X50mm X5 mm MS angle clamps prefixed to masonry or slab,
columns with Hilti make anchor fastener screws. The fixing of panel to be done with the
help of VHB tapes and screws and all the sealing of joints to be done with weather sealent
Silicon as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before
inclusion of this item in estimate)
Page 416
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2049 Furniture 51.236 As directed by Supplying and fixing of 6mm thick Exterior Compact Laminate or High Pressure As directed by One Square 5841 746
Engineer in charge Laminate of approved colour by approving authority with UV resistant Decorative colour Engineer in charge Metre
paper on both side typically made out of multiple layers of craft papers and then
impregnated with thermosetting phenolic resins, on top of it melamine treated barrier
paper and decorative paper and wear layer on both the sides saturated with melamine
resins and then covered with UV resistant acrylic resin layer which makes it extremely
durable and weather resistant compressed together on extremely high pressure and
hardened with electron beam curing to get the total desired thickness of 6mm matching
European standard specification as per EN 438 -part 6, protected with 60 Micron
protective peel-off film on both side which in no case leave any adhesive mark over the
panel surface after it is peeled off. Fixing of the same to be done on a supporting frame of
50 mm X 5 mm X 3 mm powder coated aluminium box section to be spaced horizontally
and vertically in 600mm X 600mm grid and fixed to building structure as per design
through 50mmX50mmX mm 5 mm MS angle bracket prefixed to masonry slab or
columns with Hilti make anchor fastener along with all related hardware and fixtures. The
panel should then be fixed on the Aluminium section with the help of pure polyester
exterior grade colour coating rivets as per architectural drawings or as directed by
Engineer-in-charge. Each panel should be riveted on substructure maintaining a gap of
6mm on all the sides between each Panel for Air circulation and expansion and
contraction as per installation specifications provided by the manufacturer. The cost shall
include all expenses related to storage, material handling, lifting, freight, labour,
scaffolding etc as directed by Engineer-in-charge. (Prior permission of S.E. is necessary
before inclusion of this item in estimate)
2050 Road furniture 51.237 As directed by Providing and Laying of 2 or more sets (6 Nos. each set) Dual Ribs Pattern Rumble As directed by One Square 4586 52
Engineer in charge Markings on roads with vehicular speeds of more than 50 Km/hr laid as per the spacing Engineer in charge Metre
recommended for each set under Table 11.1 and Fig. 11.2 of IRC 35:2015 using Plastirib
2K, or equivalent 2 component cold plastic profiled material. Each Dual Rib pattern
rumble marking shall have width of 500 mm. Each dual rib pattern rumble marking shall
have 2 ribs each of Width of 60 mm and height 20 mm. Gap between two ribs shall be 300
mm. Each rumble marking shall be made complete with drop on Soild Plus reflective glass
beads @ 300 gm / One Square Metre spread throughout the surface of marking. The
finished surface to be levelled, uniform and free from streaks and holes, including surface
cleaning and cost of all materials etc. complete. as directed by Engineer-in-charge.
Page 417
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2051 a a) 125 mm Thick precast ( For span Upto 6.50 M ) As directed by One Square 3855 1157
Engineer in Meter
charge
2052 b b) 150 mm Thick Precast ( For Span above 6.50 m to 10.00 m) As directed by One Square 4137 1241
Engineer in Meter
charge
Bridge cum 52.02 Providing and casting in stu RCC M 30 grade Self Compacted Concrete of required
Bhandara thickness for arch type bandhara as per the standard drawing including cost all basic
mateial ,labour , including cost of formworks, TMT ( Fe500 ) reinforcement as per
standard drawings required for arches only , casting of end pillers and bottom haunch as
per drawing to make arch shape Bandhara , providing waterproofing impermeable geotex
membrane at joints and providing all requisite safety measure during construction of the
arches (excluding transporation of basic material from quarry / market) etc complete.
2053 a a) 150mm Thick ( For span Upto 6.50 M ) As directed by One Square 3997 1199
Engineer in Meter
charge
2054 b b) 200 mm Thick ( For Span above 6.50 m to 10.00 m) As directed by One Square 4717 1415
Engineer in Meter
charge
Page 418
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2055 Bridge cum 52.03 Appointing Expert /Professional Consultant for selection of Bandhara sites upto 100 m As directed by Per Site 7000 0
Bhandara length having minimum 2 visits per bandhara , noting the broad features like span, Engineer in
height, type of foundation, special features specific to the site to come to the conclusion of charge
adopting standard design & drawing, checking suitability of site, finalizing site for
construction of Bandhara and submitting the observation note accordingly to Department.
( Transporation from Regional Head quarter to actual site and accomodation at site /
Taluka head quarter / District Headquarter is not included in this item and it shall be paid
separately wherever necessary.)
2056 Bridge cum 52.04 Detailed survey for bandhara - As directed by Per No 126012 0
Bhandara Taking longitudinal section of stream extending 1.20 km on upstream and downstream Engineer in
side of the bandhara site, taking cross sections at every 100 m interval of the stream on charge
upstream side, taking bed slope of stream and other details, taking 3 trial pits 1.00 m x
1.00 m x 3.00 m, plotting details of stratification indicating type of soil/rock, preparation
of detailed survey data including preparation of hydraulic design including calculations for
afflux, height of the weir and storage capacity of bandhara etc., obtaining the village map
and studying the land width of nalla, make a preliminary assessment of likely storage of
nalla with nalla training as per width shown in village map, marking on village map the
locations of existing wells, bore wells within radius of 1.5 km by total station and also
depth of water and borewell depth, identifying the maji malgujari tanks or other lakes
owned by Govt. within radius of 3 km, assessing the radial distance and plan area as per
village map, preparing detailed plans referring the std. design & drawing and preparing
detailed estimate as per approved SSR in 3 copies and submitting the project duly typed
along with relevant drawings in hard and soft copies in CD / Pen Drive etc. as required
by the Department.
Page 419
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2057 bambusa 52.05 Providing and constricting Rammed Earth walls built out of normal compacted soil with As directed by One Cubic Meter 11300 6540
bamboos item temporary steel formwork, similar to one for concreting, has to be erected; soil is placed Engineer in charge
into the framework and compacted. Soon after finishing compacting, the formwork can be
removed. The ideal soil for this kind of building consists in a good mix of different sizes
of granularity, from clay (about 10-40%) to silt (about 10-40%) to sand (about 35-65%)
and even very fine gravel. Top soil and organic soil have a strong smell of moldy,
especially when fresh or humid are not suitable for building.The mix for rammed earth
wall shall consist of soil, sand and cement / lime (5% to 8%) as binding material. The
minimum thickness shall be around 35cm, mainly to allow stability and thermal mass. The
work must got done under supervision of an experience Mason including necessary
scaffolding, formwork, labour, material and finishing etc. complete.
2058 bambusa 52.06 Providing and fixing Bamboo Shingle roofing with top layer of Bamboo shingles, made of As directed by One Square 10150 1100
bamboos item flattened CCB pressure treated bamboo of 50-100mm dia and in size of 450mm x150mm Engineer in charge Meter
and 3 to 5 mm thick laid over bamboo battens of minimum 25mm thickness,
perpendicular to rafter/Beam at spacing of 150mm c/c including laying of bituminous
sheet 3 mm thick and minimum overlap of 300 mm placed over sub-purling which is laid
parallel to main rafter /beam consisting of 50mm dia not less than 3m length at spacing of
300mm c/c on treated Bamboo woven matt of approved design made out of thin Bamboo
strips, supported by CCB treated Bamboo purlins of min dia 50mm not less than 3m
length at spacing of 300mm c/c and WPC sheet 6 mm thick, junction details as per
drawing and design including all Bamboo accessories like CCB treated
Shingles,antiabrasive fire retardant coating ( top and bottom surfaces of roofing system as
directed by Engineer in Charge), Bamboo, bamboo mats, SS clamps, nails, Screws,
including required scaffolding and cost of labour material with all lead & lifts and
machinery & equipment charges, etc complete.
Page 420
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2059 bambusa 52.07 Providing and fixing in position Phenol bonded Bamboo wood flooring with planks of As directed by One Square 5006 64
bamboos item sizes 14mm thick, 1800 mm length (minium) and 130 mm wide (minimum), in approved Engineer in charge Meter
colour, texture and finish, having Performance Appraisal certified (PAC) issued by
Building Materials & Technology Promotion Council (BMTPC). The flooring shall be
fixed with tongue and groove interlocking system, with underlayment of 4mm thick
expanded poly ethylene foam sheets having density 40kg/One One Cubic Metre, over
prepared surface with necessary quarter round planks of size 1900mm x 18mm and door
reducer of size 1900mm x 44mm, whereever required. The bamboo wood planks shall
have minimum density of 1000 kg/One One Cubic Metre & minimum Hardness 1000kgf.
with Eco friendly UV coating, all complete as per direction of Engineer in -charge.
Ground floor
2060 bambusa 52.08 Providing & fixing in position Phenol bonded Bamboo wood partition 60mm thick at all As directed by One Square 9650 110
bamboos item height with planks of size 10mm thick, 1800mm length ( minimum) and 130mm ( Engineer in charge Metre
minimum), in approved colour, texture and finish, on both side having Performance
Appraisal Certificate (PAC ) issued by Building Material & Technology Promotion
Council (BMTPC), with necessary profiled edges fixed with 40 mm SS screws 5nos in
each tile to frame made of second class teak wood of size 40 x 40 mm in center of each
tiles and bottom / top of work height. The bamboo wood planks shall have minimum
density of 1000kg / cum & minimum Hardness 1000kgf. with Eco friendly UV coating,
all complete as per direction of the Engineer in -charge.
2061 bambusa 52.09 Providing & fixing after cutting in proper size & shape bamboo pole of Dentrocalamus As directed by One Running 1225 571
bamboos item stocksii with minimum wall thickness of 10 mm of size 50 mm(+/- 5 mm) diameter (i.e., Engineer in charge Metre
50mm dia. in bottom & top dia. should be 35mm & average dia. should not be less than
40mm & taper length should not more than 2.5mm per Rmt), which is well seasoned by
freshly cut canes including treatment with preservative inside the bamboo pole &dosing
with CCB (Chromium Copper Bromate) using pressure vacuum treatment plant with
retention level of minimum 8% and in accordance with IS 9096. These bamboos are used
for making beams & columns including bending of bamboos, joining, bunching of
bamboos, assembly and its installation as per design using bamboo pegs (45 degree), SS
Studs fixed with nuts & bolts (304 grade), GI plates coated with epoxy coating, including
transportation & cost of material, antiabrasive fire retardant coating before bunching of
bamboos( Two coats before bunching and final coat after complete installation as directed
by Engineer in Charge) , necessary scaffolding with all lead, lift, machinery & equipment
charges, etc. complete, as directed by the Engineer in charge
Page 421
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2062 bambusa 52.10 Providing and fixing in roof system after cutting in proper size and shape Griha Certified As directed by One Square 1430 208
bamboos item WPP sheet made of wood polymer composite - WPC) of thickness 6mm, density more Engineer in charge Meter
than 550 kg/cum, having proper screw holding capacity. This board shall not be pasted
with treated bamboo mats and fixed over bamboo purlins with SS Nails/SS Screws. The
bamboo mat design visible from below may be hapazard. The rates shall be including
trasportation, cost of WPC Board and all fixtures and fastenings with necessary
scaffolding with all lead and lift, machinery and equipment charges etc. complete as
directed by Engineer in charge.
2063 bambusa 52.11 Supply & Application of Fire retardant Polish with Fire Retardant sealer field coat of As directed by One Square 1512 195
bamboos item approved make & one, two or three coats. Top Coat to provide class-I surface spread of Engineer in charge Meter
flame as per BS:476 Part 6 & 7 and IS-12777 in clear shade including cleaning, injecting
of fire retardent sealer and preparation of surface including transportation and cost of
material, necessary scaffolding with all lead, lift, machinery & equipment charges, etc.
complete as per instructions of Engineer-In-Charge/Manufacturers specification,3- Apply
Two coats of fire retardant clear solvent based top coat which specific gravity should
be 0.97 in regular 4-6 hour duration
Page 422
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2064 Waterproofing 52.12 Waterproofing Treatment to new terrace by using Polymeric Cementitious Membrane as As directed by One Square 1532 838
approved by Engineer in charge, followed by 112mm thick brick bat coba covered with 20 Engineer in charge Metre
mm mortar finish. If there are cracks on the bare slab, open the crack in V Groove and fill
it with ready to use repair polymer modified mortar based on special cements, aldehyde
based polymers with thixotropy modifying agents. If there are lots of honeycombs and
identified bad patches of concrete the same should be grouted as per the instructions of
site incharge. (The grouting shall be paid separately). Clean the entire surface thoroughly
and over this prepared surface, apply three coats of polymeric Cementitious
waterproofing coating having a non-toxic, 2-(methoxycarbonyl)-1-propene-Butyl-2
propenoate (MPBP) based polymeric waterproofing solution as approved by Engineer in
charge. Provide and lay 112 mm average thicknes of brick bat coba in cement mortar 1:5
over 12mm thick CM 1:3 bedding with one pouch of 330 grams of thorough blend of
special cements, aldehyde based polymers, shrinkage compensating agents as approved by
Engineer in charge per 50 Kg bag of cement and finishing with 20 mm thick cement
plaster in cement mortar 1:3 by mixing one 330 grams pouch of above admixture per 50
Kg bag of cement, including all lead, lifts and laid to proper slope to drain off water
entirely preparing bell mouth including watta, beveled or champhered portion at the
junction of parapet and work up to a height of 300 mm or as directed and including
finishing the top layer of waterproofing treatement with false marking of 30 cm x 30 cm
or as directed, curing and covering the whole treatment. MPBP Polymeric Waterproofing
Coating for Concrete and Masonry should have following minimum properties: (1)
Elongation % (ASTM D412-2016): @ 100% (2) Tensile Strength N/mm2 (ASTM D412-
2016): 3.3 (3) Specific Gravity: 1.02 ± 0.02 (4) Total Solids (ASTM D1644-2012):
43.98 (5) Hardness Shore A (ASTM D2240-2015): 82
Page 423
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2065 Waterproofing 52.13 Waterproofing Treatment to new Toilet/bathroom by using Polymeric Cementitious As directed by One Square 1532 838
Membrane as approved by Engineer in charge, followed by 112mm thick brick bat coba Engineer in charge Metre
covered with 20 mm mortar finish. If there are cracks on the bare slab, open the crack in V
Groove and fill it with ready to use repair polymer modified mortar based on special
cements, aldehyde based polymers with thixotropy modifying agents. If there are lots of
honeycombs and identified bad patches of concrete the same should be grouted as per the
instructions of site incharge. (The grouting shall be paid separately). Clean the entire
surface thoroughly and over this prepared surface, apply three coats of polymeric
Cementitious waterproofing coating having a non-toxic, 2-(methoxycarbonyl)-1-propene-
Butyl-2 propenoate (MPBP) based polymeric waterproofing solution as approved by
Engineer in charge. Provide and lay 112 mm average thicknes of brick bat coba in cement
mortar 1:5 over 12mm thick CM 1:3 bedding with one pouch of 330 grams of thorough
blend of special cements, aldehyde based polymers, shrinkage compensating agents as
approved by Engineer in charge per 50 Kg bag of cement and finishing with 20 mm thick
cement plaster in cement mortar 1:3 by mixing one 330 grams pouch of above admixture
per 50 Kg bag of cement, including all lead, lifts and laid to proper slope to drain off
water entirely preparing bell mouth including watta, beveled or champhered portion at the
junction of wall and work up to a height of 300 mm or as directed and including finishing
the top layer of waterproofing treatement with false marking of 30 cm x 30 cm or as
directed, curing and covering the whole treatment. MPBP Polymeric Waterproofing
Coating for Concrete and Masonry should have following minimum properties:1)
Elongation % (ASTM D412-2016): @ 100% 2) Tensile Strength N/mm2 (ASTM D412-
2016): 3.3 3) Specific Gravity: 1.02 ± 0.02 4) Total Solids (ASTM D1644-2012): 43.98
5) Hardness Shore A (ASTM D2240-2015): 82
Page 424
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2066 Waterproofing 52.14 Waterproofing treatment to new terrace by using chlorinated paraffinated talcum As directed by One Square 3026 838
polyurethane (CPTP) elastomeric membrane as approved by Engineer in charge, followed Engineer in charge Metre
by average 112mm thick brick bat coba covered with 40mm thick IPS.
The procedure includes filling of cracks on the RCC slab with high performance
polyurethane (liquid applied) membrane. Clean the entire surface thoroughly and over this
prepared surface, apply a primer coat of high performance polyurethane (liquid applied)
membrane as approved by Engineer in charge. Apply the primer by roller. Extend the
coating to parapet walls including the top of parapet. Allow the primer coat to set for 24
hrs. After the primer coat is set, apply two coats of chlorinated paraffinated talcum
polyurethane (CPTP) elastomeric membrane as approved by Engineer in charge on
surface. Ensure that pinholes are touched up properly. While the second coat of high
performance polyurethane (liquid applied) membrane is wet and tacky, sprinkle coarse
sand over the surface to make it rough and provide mechanical key for further treatment.
Provide and lay average 15 mm thk protective coat of CM in 1:4 over the surface and
allow to set and cure. Provide and lay 112 mm thk BB coba in average thickness in
cement mortar 1:5 with one pouch of thorough blend of special cements, aldehyde based
polymers, shrinkage compensating agents - which is based on special cements, aldehyde
based polymers, shrinkage compensating agents and selected sands having high abrasion
resistance as approved by Engineer in charge per 50 Kg bag of cement and finishing with
40 mm thick IPS layer in M-20 CC by mixing one pouch of 330 grams of thorough blend
of special cements, aldehyde based polymers, shrinkage compensating agents per 50 Kg
bag of cement, including all leads, lifts and laid to proper slope to drain off water entirely
preparing bell mouth including watta, beveled or champhered portion at the junction of
parapet and work up to a height of 300 mm or as directed and including finishing the top
layer of waterproofing treatment with false marking of 30 cm x 30 cm or as directed,
curing and covering the whole treatment. The liquid membrane should have a track record
of atleast 4 years in India & Gulf region and have atleast an 4 year track record in PWD.
Single Component, Liquid Applied, chlorinated paraffinated talcum polyurethane (CPTP)
elastomeric membrane should have following minimum properties: 1) Water Permeability
(DIN 1048): Nil as per DIN 1048 @ 7 bar of Hydrostatic Pressure. 2) Moisture
Page 425
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2067 Waterproofing 52.15 Waterproofing treatment to new terrace by using chlorinated paraffinated talcum As directed by One Square 2125 838
polyurethane (CPTP) elastomeric membrane as approved by Engineer in charge, followed Engineer in charge Metre
by average 112mm thick brick bat coba covered with 40mm IPS.
The procedure includes filling of cracks on the RCC slab with chlorinated paraffinated
talcum polyurethane (CPTP) elastomeric membrane. Clean the entire surface thoroughly
and over this prepared surface, apply a primer coat of CPTP admixed appropriately in
dimethyl benzene Primer as approved by Engineer in charge. Apply the primer by roller.
Extend the coating to parapet walls including the top of parapet. Allow the primer coat to
set for 24 hrs. After the primer coat is set, apply two coats of continuous chlorinated
paraffinated talcum polyurethane (CPTP) elastomeric membrane as approved by Engineer
in charge on surface. Ensure that pinholes are touched up properly. While the second coat
of CPTP is wet and tacky, sprinkle coarse sand over the surface to make it rough and
provide mechanical key for further treatment. Provide and lay average 15 mm thk
protective coat of CM in 1:4 over the surface and allow to set and cure. Provide and lay
112 mm thk BB coba in average thickness in cement mortar 1:5 with one pouch of
thorough blend of special cements, aldehyde based polymers, shrinkage compensating
agents - which is based on special cements, aldehyde based polymers, shrinkage
compensating agents and selected sands having high abrasion resistance as approved by
Engineer in charge per 50 Kg bag of cement and finishing with 40 mm thick IPS layer in
CC M – 20 by mixing one pouch of 330 grams of thorough blend of special cements,
aldehyde based polymers, shrinkage compensating agents per 50 Kg bag of cement,
including all lead, lifts and laid to proper slope to drain off water entirely preparing bell
mouth including watta, beveled or champhered portion at the junction of parapet and work
up to a height of 300 mm or as directed and including finishing the top layer of
waterproofing treatment with false marking of 30 cm x 30 cm or as directed, curing and
covering the whole treatment. Single Component, Liquid Applied, chlorinated
paraffinated talcum polyurethane (CPTP) elastomeric membrane should have following
minimum properties: 1) Specific Gravity: 1.30 ± 0.1 2) Elongation %: >600 3) Tack Free
Time: 24-48 hrs 4) Tensile Strength N/mm2: 2.1 5) Shore Hardness: 40 ± 5
Page 426
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2068 Waterproofing 52.16 Removing loose rust from the reinforcement bars by wire brushing, light hammering etc. As directed by One Square 2211 445
and applying sulphate and chloride free inorganic single component rust remover Engineer in charge Metre
Rusticide as approved by Engineer in charge conforming to IS 9077. The rusted surface
shall become blackish non rusted colour. After 24 hours of application of rust remover,
loose particles shall be removed by brush. Apply one more coat of Rusticide. Apply
bonding coat slurry of high performance acrylic polymer - Methyl 2-methylpropenoate
copolymer with another enoate as approved by Engineer in charge on entire surface. Mix
1 Kg of acrylic polymer with 0.5 Kg of cement. Finish it with ready to use repair polymer
modified mortar based on special cements, aldehyde based polymers with thixotropy
modifying agents as approved by Engineer in charge (The Polymer Modified Mortar
(PMM) should attain min. compressive strength of 20 N/mm2 in 1 day and 30 N/mm2 in
7 days) by adding 13 - 16% water by weight of polymer modified mortar for treatment to
the damaged RCC members. Add 1 Kg of Migrating Corrosion Inhibiting Admixture as
approved by Engineer in charge per 25 Kg bag of polymer modified mortar. After mixing
polymer modified mortar, it can be trowel applied or sprayed. When applying by hand,
polymer modified mortar must be forced tightly into the substrate to ensure complete
contact with the substrate. (If scaffolding is required, same shall be provided and will be
paid under relevant item) (Upto 15 mm thickness at a time).
Page 427
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2069 Waterproofing 52.17 Removing loose rust from the reinforcement bars by wire brushing, light hammering etc. As directed by One Square 1471 214
and applying sulphate and chloride free inorganic single component rust remover Engineer in charge Metre
Rusticide as approved by Engineer in charge conforming to IS 9077. The rusted surface
shall become blackish non rusted colour. After 24 hours of application of rust remover,
loose particles shall be removed by brush. Apply one more coat of Rusticide. Apply
bonding coat slurry of high performance acrylic polymer - Methyl 2-methylpropenoate
copolymer with another innovate as approved by Engineer in charge on entire surface.
Mix 1 Kg of acrylic polymer with 0.5 Kg of cement. Finish it with ready to use repair
polymer modified mortar based on special cements, formaldehyde based polymer with
thixotropy modifying agents as approved by Engineer in charge (The Polymer Modified
Mortar (PMM) should attain min. compressive strength of 20 N/mm2 in 1 day and 30
N/mm2 in 7 days) by adding 13 - 16% water by weight of polymer modified mortar for
treatment to the damaged RCC members. Add 1 Kg of Migrating Corrosion Inhibiting
Admixture as approved by Engineer in charge per 25 Kg bag of polymer modified mortar.
After mixing polymer modified mortar, it can be trowel applied or sprayed. When
applying by hand, polymer modified mortar must be forced tightly into the substrate to
ensure complete contact with the substrate. (If scaffolding is required, same shall be
provided and will be paid under relevant item) (15-30 mm thickness at a time).
Page 428
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2070 Waterproofing 52.18 For Strengthening of concrete RCC, Columns, Beams, Slabs, Foundation etc. Execute the As directed by One Kilo Gram 2024 1070
work as follows. Remove dust, laitance, grease, oil, curing compounds, waxes, foreign Engineer in charge
particles, coatings and disintegrated materials by mechanical means (i.e., blast cleaning).
Empty entire pre-packed and pre-weighed contents of ‘B’ Component into pail containing
‘A’ Component. Mix for 30 seconds with a low speed stirrer. (400-600 rpm). After proper
mixing of component ‘A’ and ‘B’, now empty entire pre-packed and pre-weighed part ‘C’
component into the mix and using a mechanical stirrer mix all the components for 1-3
minutes with a low speed stirrer (400 to 600 rpm). Caution: Mix only that limited quantity
which can be placed within the pot life. Material should be quickly brushed/ poured from
pail onto concrete surface to obtain prolonged working life. Inspect the underside for
evidence of full depth cracks that may require additional treatment to prevent draining of
the resin. Cracks greater than 1/8" width should be repaired individually. Fill 1/8" or
larger cracks with loose sand and pour small quantity of mixed 2-(methoxycarbonyl)-1-
Propene Resin Sealer Cum Grout as approved by Engineer in charge into the crack, allow
to cure. The above Material is spread evenly on the surface as a flood coat with a squeegee
or rollers on horizontal and vertical surfaces and allowed to absorb completely into the
concrete substrate. Drill injecting holes to a depth of 2 - 4” in concrete depending upon
the width of crack, extent of damage and dimension of structural element. Fix the grouting
nozzle and inject the mixture of 2-(methoxycarbonyl)-1-Propene Resin Sealer Cum Grout
at pressure of 50 - 100 psi. (Rate for fixing nozzle is not included in this item). Low
Viscosity, Transparent, Three Component, 2-(methoxycarbonyl)-1-Propene Resin Sealer
Cum Grout should have following minimum properties: 1. Viscosity: < 5 cps 2. Flexural
Strength (ASTM D-790): 1 day - 17.2 MPa
3. Bond Strength (ASTM C-882): 2 days - 14.4 MPa (Dry Cure); 14 days - 15.8 MPa
(Moist cure) 4. Volume Solids %: ~100 It shall be applied as per manufacturer’s
specification. (If scaffolding is required, same shall be provided and will be paid under
relevant item) (Coatings and Grouting Items shall be separate)
Page 429
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2071 Waterproofing 52.19 Providing and applying one coat of thiazolinones (TZ) based Microbial Wall Wash and As directed by One Square 394 217
Anti-rooting Solution treatment as approved by Engineer in charge to entire surface of Engineer in charge Metre
external wall. At the junction of chajja and wall and also on the parapet wall top, give a
coat of anti fungal treatment. Cracks, if any, shall be filled with acrylic polymeric non-
shrink crack filler putty as approved by Engineer in charge, before giving waterproofing
treatment to the external surfaces. This is followed by one coat of 2-(methoxycarbonyl)-1-
propene-Butyl-2 propenoate (MPBP) based polymeric waterproofing solution as approved
by Engineer in charge, having a non-toxic acrylic polymer liquid and white cement mix in
proportion 1:1 by weight with coat interval as 24 hours. Air curing shall be done for 24
hours. Before giving this treatment the entire surface of wall shall be thoroughly cleaned
to remove existing paint, dust, dirt, oil etc. After the waterproofing treatment is cured,
provide and apply two coats of titanium dioxide based 2-(methoxycarbonyl)-1-propene-
butyl-2 propenoate (TMPBP) emulsion, heat insulating, waterproofing exterior coating as
approved by Engineer in charge in the desired shade. The inter-coat gap to be 24 hours.
The rate shall include complete treatment mentioned above. 100% Acrylic, Decorative,
Waterproofing, Heat Insulating, Exterior Coating, Anticarbonation Coating should have
following minimum properties: 1. Specific Gravity: 1.3 ± 0.1 at 25°C 2. pH: 7.0 to 10.00
3. Viscosity: 18 to 30 sec. at 25°C by Ford Cup No. B-4 (Dilute 2 parts of product with 1
part of water) (If scaffolding is required, same shall be provided and will be paid under
relevant item)
2072 Waterproofing 52.20 Providing and fixing zinc alloy based galvanic disk type sacrificial anodes (50 mm dia, 18 As directed by One Square 1089 36
mm thick) as approved by Engineer in charge to the reinforcement, that should have a 3 Engineer in charge Metre
years track record of use in PWD projects, 4 year track record in corrosive region of
abroad and pass 500 hours salt spray test as per ASTM B 117. The anode shall be
connected to the reinforcement steel by connectors provided with the anode. Sacrificial
Galvanic Anode should have following minimum properties:
1. Base: Zinc Alloy
2. Conformance: ASTM B 418 Type II
3. Zinc Mass: Min 40 g per anode
4. Geometry: Disc Type
5. Diameter: 50 mm
5. Height: 18 mm
6. Surface Area: 6751 sq mm
It shall be applied as per manufacturers specification.
(If scaffolding is required, same shall be provided and will be paid under relevant item)
Page 430
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2073 Waterproofing 52.21 Make the surface clean of loose particles, dirt, dust, oils, and paints etc. by wire brush. As directed by One Square 160 30
Remove all laitance from surface. On the entire clean surface, apply a coat of Ter polymer Engineer in charge Metre
of enoates of 2-(methoxycarbonyl)-1-propene-Butyl-2 propenoate (MPBP) and
propenonitrile as approved by Engineer in charge and cement (1:0.25) by spray or
ordinary cement brush. Fill up all bug holes with above slurry. Apply slurry generously on
entire surface without pinholes. Similar treatment to be given to other block surface
immediately. Place coated area of one block over coated area of another block
immediately after application. Polymeric bonding agent to be used for AAC Block to
AAC Block & CC Brick Block to CC Brick Block should have following minimum
properties:
1. Base: Polymeric Emulsion
2. Specific Gravity: 1.03 ± 0.02
3. pH Value: 7.5 - 8
It shall be applied as per manufacturer’s specification.
(If scaffolding is required, same shall be provided and will be paid under relevant item)
Page 431
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2074 Waterproofing 52.22 It is ready to use inorganic, bio compatible, low viscosity, non hazardous, soil stabilizing As directed by One Kilo 640 362
two component colloidal silica base chemical grout. Providing and carrying out this Engineer in charge Gram
grouting to stabilize the strata above the tunnel, foundations, cutting slope stabilization
and sub structures by using ultimate fine Nano grout as approved by Engineer in charge.
Drill injecting holes to required depth in loose soil strata. Fix the grouting pipes. Grout
must be continuously stirred during addition of accelerator and fully mixed to transparent
solution prior to grouting into the soil/strata. No white precipitates should remain in the
grout mix. This is ultimate fine grouting can be completed by Nano grout. Solvent Free,
Inorganic, Hydrophilic, Non-hazardous, Low Viscosity Chemical Grout for Stabilization
and Consolidation of Sandy/Silty Soil should have following minimum properties:
Grout: (Rate for fixing nozzle is not included in this item).
1) Specific Gravity: 1.2 ± 0.1 2) pH: 11.3 ± 0.1 3) Viscosity in B4 Ford cup at 28°C:
12-15 sec
Accelerator:
1) Specific Gravity: 1.07 ± 0.01 2) pH: 7.0 ± 0.1 3) Viscosity in B4 Ford cup at 28°C: 10-
12 sec
Sungeogrout Mix:
1) Specific Gravity: 1.2 ± 0.1 2) Viscosity in B4 Ford cup at 28°C: 12-15 sec
It shall be applied as per manufacturer’s specification.
(If scaffolding is required, same shall be provided and will be paid under relevant item)
Page 432
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2075 Waterproofing 52.23 Waterproofing Treatment to plastered surface of toilet & bathroom walls minimum up to As directed by One Square 450 198
90 cm (Dado) by using 2-(methoxycarbonyl)-1-propene-Butyl-2 propenoate (MPBP) Engineer in charge Metre
based polymeric waterproofing solution as approved by Engineer in charge. Clean the
entire surface thoroughly and over this prepared surface, apply three coats of 2-
(methoxycarbonyl)-1-propene-Butyl-2 propenoate (MPBP) based polymeric waterproofing
solution as approved by Engineer in charge.While the 3 coat is wet broadcast sand on the
surface. Provide 20 mm thick cement plaster in CM 1:3 with one pouch of 330 grams of
thorough blend of special cements, aldehyde based polymers, shrinkage compensating
agents as approved by Engineer in charge per 50 Kg bag of cement including all lead,
lifts ,curing etc complete. Acrylic Polymeric Waterproofing Coating for Concrete and
Masonry should have following minimum properties:
1. Elongation % (ASTM D412-2016): @ 100%
2. Tensile Strength N/mm2 (ASTM D412-2016): 3.3
3. Specific Gravity: 1.02 ± 0.02
4. Total Solids (ASTM D1644-2012): 43.98
5. Hardness Shore A (ASTM D2240-2015): 82
It shall be applied as per manufacturer’s specification.
2076 Waterproofing 52.24 Providing & mixing liquid internal curing compound which is based on water soluble As directed by One Litre 528 61
oxyethylene polymer (OEP) for RCC, Shotcrete, mortar .The liquid shall be conforming Engineer in charge
to AS 3799 -1998 for curing efficiency not less than 90% & capable of improving
workability, pumpability, impermeability, full hydration of all types of cement essential
for optimum strength development. The dose of liquid shall be average 1.25 % by weight
of cement. The liquid is to be mixed with gauging water while mixing the
concrete/motar/shortcrete.
Page 433
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2077 Waterproofing 52.25 Clean the existing surface / terrace thoroughly to remove dirt, loose particles, laitance etc. As directed by One Square 704 195
For emergency waterproofing of existing terrace. Use a vacuum cleaner or high pressure Engineer in charge Meter
jet or wire brushing as per requirement. Examine the surface closely for any cracks. Fill it
with acrylic polymeric non-shrink crack filler putty as approved by Engineer in charge a
pure aliphatic, acrylic, polymer modified ready to use paste. After filling, allow the surface
to dry for atleast 24 hrs. If the depth of the crack is more than 2-3 mm apply in layers at
intervals. Moisten the surface with a water jet one day prior to the application of
waterproofing coating. Mix 1 part of 2-(methoxycarbonyl)-1-propene-Butyl-2 propenoate
(MPBP) membrane as approved by Engineer in charge and 1 part of grey cement by
weight using a low speed mechanical stirrer to form slurry lump free consistency. Apply
this as a primer coat of 2-(methoxycarbonyl)-1-propene-Butyl-2 propenoate (MPBP)
membrane as approved by Engineer in charge. Apply the same slurry by roller at 24 hrs
interval between the applications of each coat. Extend the coating to parapet walls. Allow
the primer coat to set for 24 hrs. After the primer coat is set, apply two coats of pure
enoate based polymer titanium dioxide based 2-(methoxycarbonyl)-1-propene-butyl-2
propenoate (TMPBP) and 2-(methoxycarbonyl)-1-propene-Butyl-2 propenoate (MPBP)
of waterproof coating as approved by Engineer in charge on surface. Ensure that no
pinholes are let untouched. Allow the membrane to cure for 24-48 hours. Single
Component, UV Resistant, Elastomeric, High Build Waterproof Coating (Confirming to
DIN 1048) should have following minimum properties: 1) Elongation % (ASTM D 638):
@ 400% 2) Tensile Strength (ASTM D 412): 150 psi 3) Water Permeability (DIN 1048):
Zero 4) Solids: > 65% 5) pH: 8.5 - 10.5
Page 434
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2078 Waterproofing 52.26 Providing Water proofing treatment to old terraces by removing existing treatment, As directed by One Square 2167 512
sealing of cracks by non shrink crack fill compound applying first coat of polymer Engineer- in-charge. Meter
modified semi-viscous paste prepared by mixing polymer of approved make and Cement
in 1 : 2 proportion (1 litre polymer : 2 Kg Cement ) to a neatly cleaned and dust free
concrete surface and upto 300 mm over parapet wall prepared by removing loose and
deposited material with brush and water, followed by a coat of flexible cementious coating
eg. MYK-Aqufine U.M., EL Monobond or equivalent as per manufacturer specification
after laying glass fibre mesh of 10 x 10 specification of approved make over tacky surface
of first coat of polymer followed by second coat in transverse direction, sprinkling coarse
sand over it, followed by protective mechanical cover of 20 mm water proof plaster after
sufficient curing 40 to 75 mm IPS 1:2:3 proportion using coarse aggregate of 10 MSA and
water proofing compound and polypropylene fibres @ 125 gm per bag of cement within it
conforming to IS in pannels making groove 3 to 4 mm wide & 10 mm deep & 3m/4m or
as per site condition & filling the joints with polt sulphide sealant after curing, including
providing holler with drip moulds at the junction and finishing the concrete surface
with neat cement slurry including curing as directed and ponding the surface as directed
etc. complete; covering 10 years guarantee against leakproofness on Court Fee Stamp
Paper of Rs. 100/-
2079 Waterproofing 52.27 Providing Water proofing treatment to newly laid fully cured concrete slab of terraces by As directed by One Square 1746 472
applying first coat of polymer modified semi-viscous paste prepared by mixing polymer of Engineer in Charge Meter
approved make and Cement in 1 : 2 proportion ( 1 litre polymer : 2 Kg. Cement) to a
neatly cleaned and dust free concrete surface and upto 300 mm. over parapet wall prepared
by removing loose and deposited material with brush and water, laying glass fibre mesh of
10 x 10 specification of approved make over tacky surface of first coat of polymer
followed by second coat in transverse direction, sprinkling coarse sand over it, followed
by protective mechanical cover water proof plaster 20 mm thick after sufficient curing
apply IPS 40 mm to 75 mm. thick cement concrete of 1:2:3 proportion using coarse
aggregate of 10 MSA and water proofing compound of approved make and polypropylene
fibres @ 125 gm per bag of cement making groovr 3 to 4 mm wide & 10 mm deep in
concrete, in pannels of 3m/4m or as per site condition & filling the joints with poly
sulphide sealant after curing including providing holler with drip moulds at the junction
and finishing the concrete surface with neat cement slurry, as directed and ponding the
surface as directed etc.complete ; covering 10 years guarantee against leakproofness on
court Fee stamp paper of Rs 100/-
Page 435
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2080 Waterproofing 52.28 Providng Grouting by specially prepared grout of approved make chemical with cement As directed by One Kilo 404 97
in proportion 1:3.5 (1 part chemical & 3.5 part cement by weight) along wih 50 ml super Engineer In Charge Gram
plasticizer non cracking antiwash high strength polymer cement grout P C grout
available in bags or equivalent with proper water for injectable consistency and applying it
in the body of structure like slab, beam, column, pillars, deckslab, retaining wall,
basement, underground and elevated water storage reservoir concrete and brick wall, crack
portion of structure etc. by injectng method, to achieve its original strength including
drilling of suitable diameter drills holes at 2 to 4 Nos. per sqm. using caps and nozzle
grouting machinery necessary, scaffolding, finishing and covering gurantee of 10 years on
court stamp paper of Rs. 100/- and necessary testing etc. complete. (Prior permission of
S.E. in writing is necessary before inclusion of this item in estimate)
2081 Bridge repair 52.29 For all concrete New / Repair of RCC / PSC Bridges using migrating, non-nitrite based As directed by One Kilo 210 0
corrosion inhibiting admixture as approved by Engineer in charge at a dose of 3 Kg per Engineer in charge Gram
cum of concrete. The admixture should protect both cathodic and anodic sites and has
been recommended for use by Ministry of Road Transport & Highways and should have a
8 year track record of use in both abroad and India. Admixture should have evaluated test
reports demonstrating a corrosion rate of zero coulombs after 9 test cycles and less than
2000 coulombs as per ASTM G 109 when tested from a research institution NBA
accredited Grade A and internationally ranked among top 5 research institutions in the
world in Annual Survey conducted by Georgia Institute of Technology ranking of research
institutions. PH of admixture should be alkaline in nature and is based on Polyalkalene
polyamines with specific gravity of 0.99 - 1.1 brownish colour. The contractor must
intimate the engineer in charge prior to addition in concrete for recording. If the admixture
is put in the concrete mix at the batching plant, a written record of the amount of
admixture used shall be supplied to the engineer. The engineer must ensure that the
specified dosage of admixture is added in the concrete mix. (If scaffolding is required,
same shall be provided and will be paid under relevant item)
Page 436
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2082 Bridge repair 52.30 For Strengthening of concrete RCC, PSC bridges including piers, girders, deck slabs etc. As directed by One Kilo 2064 1107
Execute the work as follows. Remove dust, laitance, grease, oil, curing compounds, Engineer in charge Gram
waxes, foreign particles, coatings and disintegrated materials by mechanical means (i.e.,
blast cleaning). Empty entire pre-packed and pre-weighed contents of ‘B’ Component into
pail containing ‘A’ Component. Mix for 30 seconds with a low speed stirrer. (400-600
rpm). After proper mixing of component ‘A’ and ‘B’, now empty entire pre-packed and
pre-weighed part ‘C’ component into the mix and using a mechanical stirrer mix all the
components for 1-3 minutes with a low speed stirrer (400 to 600 rpm). Caution: Mix only
that limited quantity which can be placed within the pot life. Material should be quickly
brushed/ poured from pail onto concrete surface to obtain prolonged working life. Inspect
the underside for evidence of full depth cracks that may require additional treatment to
prevent draining of the resin. Cracks greater than 1/8" width should be repaired
individually. Fill 1/8" or larger cracks with loose sand and pour small quantity of mixed 2-
(methoxycarbonyl)-1-Propene Resin Sealer Cum Grout as approved by Engineer in charge
into the crack, allow to cure. The above Material is spread evenly on the surface as a flood
coat with a squeegee or rollers on horizontal and vertical surfaces and allowed to absorb
completely into the concrete substrate. Drill injecting holes to a depth of 2 - 4” in concrete
depending upon the width of crack, extent of damage and dimension of structural element.
Fix the grouting nozzle and inject the mixture of 2-(methoxycarbonyl)-1-Propene Resin
Sealer Cum Grout at pressure of 50 - 100 psi. (Rate for fixing nozzle is not included in
this item). Low Viscosity, Transparent, Three Component, 2-(methoxycarbonyl)-1-
Propene Resin Sealer Cum Grout should have following minimum properties: 1.
Viscosity: < 5 cps 2. Flexural Strength (ASTM D-790): 1 day - 17.2 MPa 3. Bond
Strength (ASTM C-882): 2 days - 14.4 MPa (Dry Cure); 14 days - 15.8 MPa (Moist cure)
4. Volume Solids %: ~100 It shall be applied as per manufacturer’s specification.
(If scaffolding is required, same shall be provided and will be paid under relevant item)
(Coatings and Grouting Items shall be separate)
Page 437
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2083 Bridge repair 52.31 Cleaning the existing surface by mechanical means such as sand blasting so as to remove As directed by One Square 647 186
all the existing loose rust etc. Cleaning the existing concrete substrate to achieve Engineer in charge Metre
maximum adhesion between the coating and substrate. Free the surface from loose
material, grease and oil by water jet/mechanical means. Dry the surface completely.
Providing and applying one coat of Two component, solvent free, substituted long chain
nylon reticulant based coating/primer as approved by Engineer in charge. This should be
followed by two coats of protective two component, acyclic polyisocyanate reticulant
(APR) based, UV resistant coating as approved by Engineer in charge. Apply the coats by
brush or spray at 4-6 hours interval between each coat. Manufacturer of the coating shall
be Dakks ISO 9001:2015 accredited for manufacturing and design; & have a track record
of supplying the anticarbonation coating internationally. Two Component, Air Drying,
Acyclic, Polyisocyanate Reticulant (APR) based coating should have following properties:
1. Carbon dioxide diffusion equivalent air layer thickness (DIN EN 1062-6): > 200 m 2.
Carbon dioxide diffusion resistance co-efficient (DIN EN 1062-6): > 1.0 X 10^5 3.
Elongation of cured film shall be as per ASTM D 2370/98: > 17 % 4. Chloride Ion
Diffusion (ASTM C 1556): > 8.61 X 10^-12 5. The top coat shall have a minimum 5 year
track record of use in the weather conditions of the Mumbai region 6. Minimum DFT of
the entire coating system: 250 micron 7. Solid content of the base coat material: > 95%
8. Solid content of the top coat material: > 37% 9. The shade of the top coat should be
different from the shade of the base anti-carbonation coating. 10. The base anti-
carbonation coating material shall have evaluated test reports demonstrating conformance
to the following properties when tested from a research institution NBA accredited Grade
A and internationally ranked among top 5 research institutions in the world in Annual
Survey conducted by Georgia Institute of Technology ranking of research institutions. It
shall be applied as per manufacturer’s specification. (If scaffolding is required, same shall
be provided and will be paid under relevant item)
Page 438
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2084 Bridge repair 52.32 Cleaning the existing steel surface by mechanical means such as sand blasting so as to As directed by One Square 661 186
remove all the existing loose rust etc. Using cotton waste swab and apply Rusticide as Engineer in charge Metre
approved by Engineer in charge rust converting, steel passivating, flash rust preventing
sulphate and chloride free, non-alkaline, inorganic single component, and nano film
forming surface passivator (conforms to IS 9077-1979 (reaffirmed 1997) App. B CI. 5.3.3
for procedure). After 24 hours remove the free / loose rust particles by simple dusting with
brush. Providing and applying one coat of Two component, anti-corrosive, solvent free,
substituted long chain nylon reticulant based coating/primer LCNR as approved by
Engineer in charge. This should be followed by two coats of protective two component,
acryclic polyisocyanate reticulant based, UV resistant anticorrosive coating of APR as
approved by Engineer in charge. Apply the coats by brush or spray at 4-6 hours interval
between each coat. Two Component, Air Drying, Acryclic Polyisocyanate Reticulant
(APR) based Coating should have following properties:
1. Volume Solids: 40 ± 3% (Depending upon shade) 2.
Adhesion (ASTM D 4541): > 500 psi (Concrete Failure)
3. Impact Resistance (ASTM G 14): 25 - 30 J
4. Conformance: IS 13213
5. Dry Film Thickness/Coat: 40-50 microns at recommended coverage
It shall be applied as per manufacturer’s specification.
(If scaffolding is required, same shall be provided and will be paid under relevant item)
2085 Bridge repair 52.33 Remove loose, disintegrated and porous concrete at cracks and joints. Repair the same As directed by One Kilo 2647 743
with epoxy or polymer modified mortar. Drill injecting holes to a depth of 2-4 inches in Engineer in charge Gram
the concrete depending upon width of cracks, extent of damage and dimension of
structural elements. Fix the grouting nozzles. Clean all loose dust particles from the cracks
and holes by blowing compressed air through all the nozzles in succession. Mix and place
Polyurethane Based Leakage Sealing Grouting as approved by Engineer in charge. Mix
one batch at a time using a bucket and drill connected to a stirrer. Polyurethane Based
Leakage Sealing Grouting by using PU Foam Grout should have following minimum
properties:
1. Viscosity @ 25°C: 1300 ± 400 cps
2. Specific Gravity: 1.16± 0.05
It shall be applied as per manufacturer’s specification.
(If scaffolding is required, same shall be provided and will be paid under relevant item)
Page 439
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2086 Bridge repair 52.34 It is ready to use inorganic, bio compatible, low viscosity, non hazardous, soil stabilizing As directed by One Kilo 650 372
two component colloidal silica base chemical grout. Providing and carrying out this Engineer in charge Gram
grouting to stabilize the strata above the tunnel, foundations, cutting slope stabilization
and sub structures by using ultimate fine Nano grout as approved by Engineer in charge.
Drill injecting holes to required depth in loose soil strata. Fix the grouting pipes. Grout
must be continuously stirred during addition of accelerator and fully mixed to transparent
solution prior to grouting into the soil/strata. No white precipitates should remain in the
grout mix. This is ultimate fine grouting can be completed by Nano grout. Solvent Free,
Inorganic, Hydrophilic, Non-hazardous, Low Viscosity Chemical Grout for Stabilization
and Consolidation of Sandy/Silty Soil should have following minimum properties:
Grout: (Rate for fixing nozzle is not included in this item).
1) Specific Gravity: 1.2 ± 0.1
2) pH: 11.3 ± 0.1
3) Viscosity in B4 Ford cup at 28°C: 12-15 sec
Accelerator:
1) Specific Gravity: 1.07 ± 0.01
2) pH: 7.0 ± 0.1
3) Viscosity in B4 Ford cup at 28°C: 10-12 sec
Sungeogrout Mix:
1) Specific Gravity: 1.2 ± 0.1
2) Viscosity in B4 Ford cup at 28°C: 12-15 sec
It shall be applied as per manufacturer’s specification.
(If scaffolding is required, same shall be provided and will be paid under relevant item)
Page 440
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2087 Bridge repair 52.35 Removing loose rust from the reinforcement bars by wire brushing, light hammering etc. As directed by One Square 2219 453
and applying sulphate and chloride free inorganic single component rust remover Engineer in charge Metre
Rusticide as approved by Engineer in charge conforming to IS 9077. The rusted surface
shall become blackish non rusted colour. After 24 hours of application of rust remover,
loose particles shall be removed by brush. Apply one more coat of Rusticide. Apply
bonding coat slurry of high performance acrylic polymer - Methyl 2-methylpropenoate
copolymer with another enoate as approved by Engineer in charge on entire surface. Mix
1 Kg of acrylic polymer with 0.5 Kg of cement. Finish it with ready to use repair polymer
modified mortar based on special cements, aldehyde based polymers with thixotropy
modifying agents as approved by Engineer in charge (The Polymer Modified Mortar
(PMM) should attain min. compressive strength of 20 N/mm2 in 1 day and 30 N/mm2 in
7 days) by adding 13 - 16% water by weight of polymer modified mortar for treatment to
the damaged RCC members. Add 1 Kg of Migrating Corrosion Inhibiting Admixture as
approved by Engineer in charge per 25 Kg bag of polymer modified mortar. After mixing
polymer modified mortar, it can be trowel applied or sprayed. When applying by hand,
polymer modified mortar must be forced tightly into the substrate to ensure complete
contact with the substrate.
(If scaffolding is required, same shall be provided and will be paid under relevant
item)(Upto 15 mm thickness at a time).
Page 441
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2088 Bridge repair 52.36 Removing loose rust from the reinforcement bars by wire brushing, light hammering etc. As directed by One Square 1479 221
and applying sulphate and chloride free inorganic single component rust remover Engineer in charge Metre
Rusticide as approved by Engineer in charge conforming to IS 9077. The rusted surface
shall become blackish non rusted colour. After 24 hours of application of rust remover,
loose particles shall be removed by brush. Apply one more coat of Rusticide. Apply
bonding coat slurry of high performance acrylic polymer - Methyl 2-methylpropenoate
copolymer with another innovate as approved by Engineer in charge on entire surface.
Mix 1 Kg of acrylic polymer with 0.5 Kg of cement. Finish it with ready to use repair
polymer modified mortar based on special cements, formaldehyde based polymer with
thixotropy modifying agents as approved by Engineer in charge (The Polymer Modified
Mortar (PMM) should attain min. compressive strength of 20 N/mm2 in 1 day and 30
N/mm2 in 7 days) by adding 13 - 16% water by weight of polymer modified mortar for
treatment to the damaged RCC members. Add 1 Kg of Migrating Corrosion Inhibiting
Admixture as approved by Engineer in charge per 25 Kg bag of polymer modified mortar.
After mixing polymer modified mortar, it can be trowel applied or sprayed. When
applying by hand, polymer modified mortar must be forced tightly into the substrate to
ensure complete contact with the substrate.
(If scaffolding is required, same shall be provided and will be paid under relevant item)(15-
30 mm thickness at a time).
2089 Bridge repair 52.37 Providing and fixing zinc alloy based galvanic disk type sacrificial anodes (50 mm dia, 18 As directed by One Kilo 1093 38
mm thick) as approved by Engineer in charge to the reinforcement, that should have a 3 Engineer in charge Gram
year track record of use in PWD projects, 4 year track record in corrosive region of abroad
and pass 500 hours salt spray test as per ASTM B 117. The anode shall be connected to
the reinforcement steel by connectors provided with the anode. Sacrificial Galvanic Anode
should have following minimum properties:
1. Base: Zinc Alloy
2. Conformance: ASTM B 418 Type II
3. Zinc Mass: Min 40 g per anode
4. Geometry: Disc Type
5. Diameter: 50 mm
5. Height: 18 mm
6. Surface Area: 6751 sq mm
It shall be applied as per manufacturer’s specification.
(If scaffolding is required, same shall be provided and will be paid under relevant item)
Page 442
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2090 Bridge repair 52.38 Rake out loose pointing mortar material atleast upto 50 mm in depth and clean with using As directed by One Running 72 37
a nylon brush or low-pressure compressed air. It may require more depth some times Engineer in charge Meter
depending upon the loss of integrity of existing mortar. Care is to be taken that the
adjacent good and sound matrix is not disturbed. Provide anti-rooting treatment to entire
recessed pointed area. Clean the joint area properly and pointing shall be done with High
Viscosity having special thicxotropic chemicals along with long chain nylon reticulent
(LCNR) Epoxy Resin Mortar as approved by Engineer in charge. Mix 2 kg Resin + 1 kg
Hardener + 9-12 kg Quartz Sand (Graded) thoroughly to homogeneity using a slow speed
(300-500 rpm) flame proof or air driven drill fitted with a mixing attachment. Hand press
this mortar in the joint and finish the surface and allow the mortar to set for minimum 24
hours. (If scaffolding is required, same shall be provided and will be paid under relevant
item)
2091 Bridge repair 52.39 Rake out loose pointing mortar material from the joints of the heritage stone masonry As directed by One Running 522 372
atleast upto 50 mm in depth and clean the same by using a nylon brush or low-pressure Engineer in charge Meter
compressed air. It may sometimes require more depth depending upon the loss of integrity
of existing mortar. Care is to be taken that the adjacent good and sound matrix is not
disturbed. Provide anti-rooting treatment to entire recessed pointed area. Clean the joint
area properly and pointing shall be filled with a special mix of lime base hydraulic mortar
and water for masonry with highly sulphate resistant cement and silica aggregates as
approved by Engineer in charge. This lime based mortar is based on special limes with
thixotropic agents, aldehyde based polymer and selected sands having high abrasion
resistance. Hand press this mortar in the joint and finish the surface and allow the mortar
to set for minimum 24 hours. Mortar should have Compression Strength of Appr. 10
N/mm2. (If scaffolding is required, same shall be provided and will be paid under relevant
item)
Page 443
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2092 Bridge repair 52.40 Remove loose, disintegrated and porous concrete at cracks and joints. Repair the same As directed by One Kilo Gram 522 372
with epoxy or polymer modified mortar. Drill injecting holes to a depth of 2 - 4 inches in Engineer in charge
the concrete depending upon width of cracks, extent of damage and dimension of
structural elements. Fix the grouting nozzles. Clean all loose dust particles from the cracks
and holes by blowing compressed air through all the nozzles in succession. Whenever
required grouting nozzle can be introduced for subsequent cementitious lime grout which
is based on special limes with thixotropic agents, aldehyde based polymer and selected
sands having high abrasion resistance by using Lime based Hydraulic Injection
Suspension as approved by Engineer in charge. Before injecting the grout, it is advisable
to make sure the nozzles are free of dust. Care is to be taken that the air pressure is
monitored and maintained so as not to damage the matrix. Mix cementitious lime based
hydraulic ready to use - Hydraulic Injection Suspension with 35 - 45% water by its weight
in clean container using a low speed air driven mixer / stirrer to form a mix of uniform
and flowable consistency. Depending on temperature, the water demand may vary. Lime
based Hydraulic Injection Suspension should have following properties:
1. Bulk Density: 1.8 ± 0.2
2. Compressive Strength (28 days): W/P (0.45) - Appx. 10 Mpa.
It shall be applied as per manufacturer’s specification.
(If scaffolding is required, same shall be provided and will be paid under relevant item)
2093 Bridge repair 52.41 Remove roots of the plant from joints of the stone masonry manually. Make sure that no As directed by One Kilo Gram 834 372
part of the root has remained inside the masonry. Pour thiazolinones based Microbial Wall Engineer in charge
Wash and Anti-rooting Solution as approved by Engineer in charge in the Stone Masonry
joints depending upon width of roots, extent of damage and dimension of roots of plant.
For wider roots, it is necessary to first drill the holes in the bark from all the sides which
should subsequently totally filled with Microbial Wall Wash and Anti-rooting Solution so
that the same percolate in the bark. On complete absorption of the liquid, refill and the
process must be continued atleast 5 - 6 times, if necessary. Microbial Wall Wash and
Antirooting Solution should have following properties:
1. pH (5 % Solution): 6 - 8
2. Specific Gravity @ RT: 1.05 ± 0.02
It shall be applied as per manufacturer’s specification.
(If scaffolding is required, same shall be provided and will be paid under relevant item)
Page 444
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2094 Road Surevy 52.42 Visits ( minimum 2) to site of Bridge/Bandhara of length upto 100 m by As directed by Per Site 25000 0
Expert/Professional Consultant, noting the broad features like span, height, type of Engineer in charge
foundation, special features specific to the site to come to the conclusion of adopting
standard design & drawing, checking suitability of site, finalizing site for construction of
Bridge/Bandhara and submitting the observation note accordingly to Department. (
Transporation from Regional Head quarter to actual site and accomodation at site / Taluka
head quarter / District Headquarter is not included in this item and it shall be paid
separately wherever necessary.)
2095 Road Surevy 52.43 Taking longitudinal section of stream extending 1.20 km on upstream side of the As directed by Per No 126012 0
bandhara site, requisite One Number of cross sections (minimum 3) of the stream on Engineer in charge
upstream side, taking bed slope of stream and other details, taking 3 trial pits 1.00 m x
1.00 m x 3.00 m, plotting details of stratification indicating type of soil/rock, preparation
of detailed survey data including preparation of hydraulic design including calculations for
afflux, height of the weir and storage capacity of bandhara etc., obtaining the village map
and studying the land width of nalla, make a preliminary assessment of likely storage of
nalla with nalla training as per width shown in village map, marking on village map the
locations of existing wells, bore wells within radius of 1.5 km and also depth of water and
borewell depth, identifying the maji malgujari tanks or other lakes owned by Govt. within
radius of 3 km, assessing the radial distance and plan area as per village map, preparing
detailed plans referring the std. design & drawing and preparing detailed estimate as per
approved SSR in 3 copies and submitting the project duly typed along with relevant
drawings in hard and soft copies in CD / Pen Drive etc. as required by the Department.
2096 Drone survey 52.44 To carry out linear Drone survey agencies will use fully autonomous professional survey As directed by Running One 8500 0
grade drone and in post process for aerial triangulation required ground control points and Engineer in charge Kilometre
benchmarks will be collected by using survey grade dual frequency DGPS-PPK system.
After post processing agency will deliver following final output.
1.Geotagged images in JPG format with resolution of 4-5cm/pixel with 70% overlap
2. GCP values in .CSV format.
3. 3D point cloud cover in .las format.
4. digital surface model (DSM) in .tiff format.
5. 2D orthorectified images in .t iff format with 5 cm resolution which gives capability to
capture detailed features. For Linear UAV Survey
Page 445
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2097 Drone survey 52.45 To carry out polygon Drone survey agencies will use fully autonomous professional As directed by Running One 22900 0
survey grade drone and in post process for aerial triangulation required ground control Engineer in charge Kilometre
points and benchmarks will be collected by using survey grade dual frequency DGPS-PPK
system. After post processing agency will deliver following final output.
1.Geotagged images in JPG format with resolution of 4-5cm/pixel with 70% overlap
2. GCP values in .CSV format.
3. 3D point cloud cover in .las format.
4. digital surface model (DSM) in .tiff format.
5. 2D orthorectified images in .t iff format with 5 cm resolution which gives capability to
capture detailed features. For Polygon UAV Survey
2098 Road Furniture 52.46 Supplying and fixing M.S. Pipe 80 mm diameter ( 4.85 mm thick ) heavy type drilled on As directed by Running One 1401 174
new item top and painted with one coat of epoxy primer and two coats of epoxy finish paint having Engineer in charge Meter
black and white bands of 25 cm, last part of the post 0.75 mt. below ground level is
painted with three coats of red lead paint with two One Number of high tensile G.I. bolt
and nut of size 10 mm die of 25 mm long including transportation etc. complete.
2099 Road Furniture 52.47 Supplying and fixing G.I.. Pipe 50 mm diameter heavy type drilled on top and painted As directed by Running one 1241 174
new item with one coat of epoxy primer and two coats of epoxy finish paint having black and white Engineer in charge Meter
bands of 25 cm, last part of the post 0.75 mt. below ground level is painted with three
coats of red lead paint with two One Number of high tensile G.I. bolt and nut of size 10
mm die of 25 mm long including transportation etc. complete.
2100 Partition 52.48 Medium Height Partition @ 1800/1200HT TILE BASED PARTITION SYSTEM As directed by One Square 5741 0
Tile based Aluminum partition system of 1800/1200mm ht. made of 60mm thick Engineer in charge Metre
aluminum frames having two separate race ways for laying electrical & computer wiring.
The wire management shall be through to the race way to be fitted at bottom of partition
other immediately below of work top with hook on type raceway cover for easy access of
wires. Frames to be joined by aluminum connectors with M6 x 16 pan-head machine
screw and washer with aluminum post cover. Post cover snap on fashion to be connected
on aluminum connector visible aluminium to be in anodized / powdercoated finish. The
top exposed sides of the frame and posts should be covered with horizontal/ Vertical trim
and caps made of Aluminum in anodized / powdercoated finish in order to enhance its
look.Upper tiles on the partition to be in Soft Board or Marker or prelaminated partical
board tile of 9mm. thk., prelaminated partical board lower tiles in laminate finish 9mm.
thk. on both the sides .Size :- 1200/1800mm (H)
Page 446
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2101 Partition 52.49 Full Height Partitions in Solid finish - Providing and Fixing 80mm to 85mm thick Full As directed by One Square 6459 0
height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Engineer in charge Metre
Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of
Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round
Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 9mm
thk. Prelaminated Partical Board of on both side. With all the Joints in the partitions
covered with PVC extrusions to provide better sound Proofing. Tiles to be separated
55mm from each other to provide adequate space for drawing cables for electric, data and
telephone with proper facility for fixing electrical and data switch plates. as per design and
drawing.
2102 Partition 52.5 Full Height Partitions in Glass finish - Providing and Fixing 80mm to 85mm thick Full One Square 7894 0
height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Metre
Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of
Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round
Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 5mm
thk. Non Toughened Glass on both side. With all the Joints in the partitions covered with
PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each
other to provide adequate space for drawing cables for electric, data and telephone with
proper facility for fixing electrical and data switch plates. as per design and drawing.
2103 Door 52.51 Providing and fixing Factory made 31mm ABS Plastic Door made of abs plastic moulded 3627 One Square 3627 495
sheet of 1.5 mm thickness P.U. foam insulated of density 40 kg per cubic meter with Metre
seasoned wood to fit lock and hardware covered with aluminium ‘A’ section of 31mm x
27mm x27mm x 1.5mm thick powder coated and fitted with PVC ‘ L’ Corner of
dimension 75mm x75mm x 10mm thick on all four sides including all labour,
material,stainless steel fixtures and fastening etc complete
Page 447
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2104 Lamination 52.52 Providing and fixing 4mm thick High Pressure interior compact Laminate made out of As directed by One Square 3933 798
thermosetting resign treated Kraft as core material and design paper as a finish surface. Engineer in charge Metre
Compact laminates should have the characteristic of flame retardant fulfilled the criteria of
under BS-476/97 and EN438-6 with classification of BS1D0 standard property, Anti
bacterial and anti-termite property under JIS Z2801:2000, Chemical resistance, Scratch
resistant ,fire resistance, weather & climatic shock resistance( The manufacturer should
provide10 years warranty certification on any manufacturing and moisture related
defects.)The compact laminates should be resistance to water immersion through
permissible increase on thickness and mass <0.60% and board should have density
>1.35kg/cm3 and fulfilled the criteria of FSCand Green Guard Gold certification and
manufactured under EN438-2&3:2005 standard . Finish and colour of compact laminates
should be finalised under direction of Engineer –in-charge.Including fixing Compact
laminates on 25x50mm aluminium tube or approved tube size at 600mm c/c under
desirable height and fixed through same compact colour rievts or compact adhesive as per
recommended by compact supplied agency. Finish and colour of Interior clade should be
approved under engineer-in-charge direction.
2105 Lamination 52.53 Providing and fixing 6 mm thick High Pressure interior compact Laminate made out of As directed by One Square 4605 798
thermosetting resign treated Kraft as core material and design paper as a finish surface. Engineer in charge Metre
Compact laminates should have the characteristic of flame retardant fulfilled the criteria of
under BS-476/97 and EN438-6 with classification of BS1D0 standard property, Anti
bacterial and anti-termite property under JIS Z2801:2000, Chemical resistance, Scratch
resistant ,fire resistance, weather & climatic shock resistance( The manufacturer should
provide10 years warranty certification on any manufacturing and moisture related
defects.)The compact laminates should be resistance to water immersion through
permissible increase on thickness and mass <0.60% and board should have density
>1.35kg/cm3 and fulfilled the criteria of FSCand Green Guard Gold certification and
manufactured under EN438-2&3:2005 standard . Finish and colour of compact laminates
should be finalised under direction of Engineer –in-charge. including fixing Compact
laminates on 25x50 mm aluminium tube or approved tube size at 600 mm c/c under
desirable height and fixed through same compact colour rievts or compact adhesive as per
recommended by compact supplied agency. Finish and colour of Interior clade should be
approved under engineer-in-charge direction.
Page 448
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2107 Rebar 53.02 BDC 2 Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed Bd.C.2 Page No. 275 One Number 436 19
separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR
023 or relevant tested and accepted rebar guidelines. The chemical should have ETA
approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double
flute type drill bits or hollow drill bits to the required depth by rotary hammer drill,
cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be strictly followed as per the
manufacturer’s recommendations. The adequate diameter and embedment of rebars to be
decided as per PROFIS Rebar Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to be done to avoid
hitting existing rebars. Re 500 -10 mm dia 200mm depth
Page 449
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2108 Rebar 53.03 BDC 2 Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed Bd.C.2 Page No. 275 One Number 541 19
separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR
023 or relevant tested and accepted rebar guidelines. The chemical should have ETA
approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double
flute type drill bits or hollow drill bits to the required depth by rotary hammer drill,
cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be strictly followed as per the
manufacturer’s recommendations. The adequate diameter and embedment of rebars to be
decided as per PROFIS Rebar Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to be done to avoid
hitting existing rebars. Re 500 -12 mm dia 240mm depth
2109 Rebar 53.04 BDC 2 Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed Bd.C.2 Page No. 275 One Number 791 21
separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR
023 or relevant tested and accepted rebar guidelines. The chemical should have ETA
approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double
flute type drill bits or hollow drill bits to the required depth by rotary hammer drill,
cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be strictly followed as per the
manufacturer’s recommendations. The adequate diameter and embedment of rebars to be
decided as per PROFIS Rebar Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to be done to avoid
hitting existing rebars. Re 500 -16 mm dia 320mm depth
Page 450
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2110 Rebar 53.05 BDC 2 Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed Bd.C.2 Page No. 275 One Number 1179 23
separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR
023 or relevant tested and accepted rebar guidelines. The chemical should have ETA
approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double
flute type drill bits or hollow drill bits to the required depth by rotary hammer drill,
cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be strictly followed as per the
manufacturer’s recommendations. The adequate diameter and embedment of rebars to be
decided as per PROFIS Rebar Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to be done to avoid
hitting existing rebars. Re 500 -20 mm dia400mm depth
2111 Rebar 53.06 BDC 2 Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed Bd.C.2 Page No. 275 One Number 3285 48
separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR
023 or relevant tested and accepted rebar guidelines. The chemical should have ETA
approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double
flute type drill bits or hollow drill bits to the required depth by rotary hammer drill,
cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be strictly followed as per the
manufacturer’s recommendations. The adequate diameter and embedment of rebars to be
decided as per PROFIS Rebar Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to be done to avoid
hitting existing rebars. Re 500 -25mm dia 500mm depth
Page 451
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2112 Rebar 53.07 BDC 2 Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed Bd.C.2 Page No. 275 One Number 6240 64
separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR
023 or relevant tested and accepted rebar guidelines. The chemical should have ETA
approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double
flute type drill bits or hollow drill bits to the required depth by rotary hammer drill,
cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be strictly followed as per the
manufacturer’s recommendations. The adequate diameter and embedment of rebars to be
decided as per PROFIS Rebar Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to be done to avoid
hitting existing rebars. Re 500 -32mm dia 640mm depth
2113 Rebar 53.08 BDC 2 Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed Bd.C.2 Page No. 275 One Number 218 19
separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR
023 or relevant tested and accepted rebar guidelines. The chemical should have ETA
approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double
flute type drill bits or hollow drill bits to the required depth by rotary hammer drill,
cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be strictly followed as per the
manufacturer’s recommendations. The adequate diameter and embedment of rebars to be
decided as per PROFIS Rebar Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to be done to avoid
hitting existing rebars. HY20 -8mm dia 160mm depth
Page 452
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2114 Rebar 53.09 BDC 2 Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed Bd.C.2 Page No. 275 One Number 392 19
separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR
023 or relevant tested and accepted rebar guidelines. The chemical should have ETA
approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double
flute type drill bits or hollow drill bits to the required depth by rotary hammer drill,
cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be strictly followed as per the
manufacturer’s recommendations. The adequate diameter and embedment of rebars to be
decided as per PROFIS Rebar Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to be done to avoid
hitting existing rebars. HY200 -10 mm dia 200mm depth
2115 Rebar 53.10 BDC 2 Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed Bd.C.2 Page No. 275 One Number 480 19
separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR
023 or relevant tested and accepted rebar guidelines. The chemical should have ETA
approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double
flute type drill bits or hollow drill bits to the required depth by rotary hammer drill,
cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be strictly followed as per the
manufacturer’s recommendations. The adequate diameter and embedment of rebars to be
decided as per PROFIS Rebar Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to be done to avoid
hitting existing rebars. HY200 -12 mm dia 240mm depth
Page 453
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2116 Rebar 53.11 BDC 2 Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed Bd.C.2 Page No. 275 One Number 663 21
separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR
023 or relevant tested and accepted rebar guidelines. The chemical should have ETA
approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double
flute type drill bits or hollow drill bits to the required depth by rotary hammer drill,
cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be strictly followed as per the
manufacturer’s recommendations. The adequate diameter and embedment of rebars to be
decided as per PROFIS Rebar Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to be done to avoid
hitting existing rebars. HY200 -16 mm dia 320mm depth
2117 Rebar 53.12 BDC 2 Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed Bd.C.2 Page No. 275 One Number 892 23
separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR
023 or relevant tested and accepted rebar guidelines. The chemical should have ETA
approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double
flute type drill bits or hollow drill bits to the required depth by rotary hammer drill,
cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be strictly followed as per the
manufacturer’s recommendations. The adequate diameter and embedment of rebars to be
decided as per PROFIS Rebar Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to be done to avoid
hitting existing rebars. HY200 -20 mm dia400mm depth
Page 454
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2118 Rebar 53.13 BDC 2 Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed Bd.C.2 Page No. 275 One Number 2240 75
separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR
023 or relevant tested and accepted rebar guidelines. The chemical should have ETA
approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double
flute type drill bits or hollow drill bits to the required depth by rotary hammer drill,
cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to
eliminate mixing error with standard HDE A22 battery dispenser along with piston plug.
The installation and the setting instructions should be strictly followed as per the
manufacturer’s recommendations. The adequate diameter and embedment of rebars to be
decided as per PROFIS Rebar Software & the report to be submitted to the project
manager/ design engineer for approval. Scanning before drilling to be done to avoid
hitting existing rebars. HY 200 -25mm dia 500mm depth
2119 Rebar 53.14 BDC 2 Supplying, drilling/cleaning hole and fixing of Torque Controlled Expansion Anchor Bd.C.2 Page No. 275 One Number 149 7
HST3, of sizes ranging from M8 to M24. The Anchor should be third party tested, possess
ETA approval and should be pre-assembled with a galvanized bolt as per EN ISO 4042:
1999, ingenious expansion sleeve M10 and M16 (galvanized) and M8, M12, M20, M24 -
Stainless Steel (EN ISO 4042: 1999), a nut of Strength Class 8 (EN ISO 20898-2:2012)
and a galvanized washer (EN ISO 4042:1999). The anchor should be approved for use in
Cracked Concrete. Anchor must be tested and approved as per Seismic C1 and C2
Category of TR045. ETA to have Fire Resistance values for up to 120 mins as per EOTA
TR 020 and FM Approval (use in Pipe Hangers). Anchor shall be fixed at right
embedment depth as per embedment mark and activated using Hilti AT Tool Module to
ensure adequate torque as per manufacture’s torque tolerance published in ETA and same
shall be documented and submitted to Project Manager at the time of inspection. Design
of Anchor should be done as per ETAG 001 Annex C and TR045 using PROFIS Software
as per actual load data and site conditions as provided by structural consultant and the
report to be submitted to the project manager and design engineer for approval. Scanning
before drilling to be done with Hilti PS Scanning tool to avoid rebar hits. stud anchor
HST3 M8x95-30
Page 455
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2120 Rebar 53.15 BDC 2 Supplying, drilling/cleaning hole and fixing of Torque Controlled Expansion Anchor Bd.C.2 Page No. 275 One Number 379 7
HST3, of sizes ranging from M8 to M24. The Anchor should be third party tested, possess
ETA approval and should be pre-assembled with a galvanized bolt as per EN ISO 4042:
1999, ingenious expansion sleeve M10 and M16 (galvanized) and M8, M12, M20, M24 -
Stainless Steel (EN ISO 4042: 1999), a nut of Strength Class 8 (EN ISO 20898-2:2012)
and a galvanized washer (EN ISO 4042:1999). The anchor should be approved for use in
Cracked Concrete. Anchor must be tested and approved as per Seismic C1 and C2
Category of TR045. ETA to have Fire Resistance values for up to 120 mins as per EOTA
TR 020 and FM Approval (use in Pipe Hangers). Anchor shall be fixed at right
embedment depth as per embedment mark and activated using AT Tool Module to ensure
adequate torque as per manufacture’s torque tolerance published in ETA and same shall
be documented and submitted to Project Manager at the time of inspection. Design of
Anchor should be done as per ETAG 001 Annex C and TR045 using PROFIS Software as
per actual load data and site conditions as provided by structural consultant and the report
to be submitted to the project manager and design engineer for approval. Scanning before
drilling to be done with PS Scanning tool to avoid rebar hits. stud anchor HST3 SS
M8x95-30
2121 Rebar 53.16 BDC 2 Supplying, drilling/cleaning hole and fixing of Torque Controlled Expansion Anchor Bd.C.2 Page No. 275 One Number 224 7
HST3, of sizes ranging from M8 to M24. The Anchor should be third party tested, possess
ETA approval and should be pre-assembled with a galvanized bolt as per EN ISO 4042:
1999, ingenious expansion sleeve M10 and M16 (galvanized) and M8, M12, M20, M24 -
Stainless Steel (EN ISO 4042: 1999), a nut of Strength Class 8 (EN ISO 20898-2:2012)
and a galvanized washer (EN ISO 4042:1999). The anchor should be approved for use in
Cracked Concrete. Anchor must be tested and approved as per Seismic C1 and C2
Category of TR045. ETA to have Fire Resistance values for up to 120 mins as per EOTA
TR 020 and FM Approval (use in Pipe Hangers). Anchor shall be fixed at right
embedment depth as per embedment mark and activated using AT Tool Module to ensure
adequate torque as per manufacture’s torque tolerance published in ETA and same shall
be documented and submitted to Project Manager at the time of inspection. Design of
Anchor should be done as per ETAG 001 Annex C and TR045 using PROFIS Software as
per actual load data and site conditions as provided by structural consultant and the report
to be submitted to the project manager and design engineer for approval. Scanning before
drilling to be done with PS Scanning tool to avoid rebar hits. stud anchor HST3
M10x110-30
Page 456
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2122 Rebar 53.17 BDC 2 Supplying, drilling/cleaning hole and fixing of Torque Controlled Expansion Anchor Bd.C.2 Page No. 275 One Number 467 7
HST3, of sizes ranging from M8 to M24. The Anchor should be third party tested, possess
ETA approval and should be pre-assembled with a galvanized bolt as per EN ISO 4042:
1999, ingenious expansion sleeve M10 and M16 (galvanized) and M8, M12, M20, M24 -
Stainless Steel (EN ISO 4042: 1999), a nut of Strength Class 8 (EN ISO 20898-2:2012)
and a galvanized washer (EN ISO 4042:1999). The anchor should be approved for use in
Cracked Concrete. Anchor must be tested and approved as per Seismic C1 and C2
Category of TR045. ETA to have Fire Resistance values for up to 120 mins as per EOTA
TR 020 and FM Approval (use in Pipe Hangers). Anchor shall be fixed at right
embedment depth as per embedment mark and activated using AT Tool Module to ensure
adequate torque as per manufacture’s torque tolerance published in ETA and same shall
be documented and submitted to Project Manager at the time of inspection. Design of
Anchor should be done as per ETAG 001 Annex C and TR045 using PROFIS Software as
per actual load data and site conditions as provided by structural consultant and the report
to be submitted to the project manager and design engineer for approval. Scanning before
drilling to be done with PS Scanning tool to avoid rebar hits. studanchorHST3 SS
M10x110-30
2123 Rebar 53.18 BDC 2 Supplying, drilling/cleaning hole and fixing of Torque Controlled Expansion Anchor Bd.C.2 Page No. 275 One Number 238 7
HST3, of sizes ranging from M8 to M24. The Anchor should be third party tested, possess
ETA approval and should be pre-assembled with a galvanized bolt as per EN ISO 4042:
1999, ingenious expansion sleeve M10 and M16 (galvanized) and M8, M12, M20, M24 -
Stainless Steel (EN ISO 4042: 1999), a nut of Strength Class 8 (EN ISO 20898-2:2012)
and a galvanized washer (EN ISO 4042:1999). The anchor should be approved for use in
Cracked Concrete. Anchor must be tested and approved as per Seismic C1 and C2
Category of TR045. ETA to have Fire Resistance values for up to 120 mins as per EOTA
TR 020 and FM Approval (use in Pipe Hangers). Anchor shall be fixed at right
embedment depth as per embedment mark and activated using AT Tool Module to ensure
adequate torque as per manufacture’s torque tolerance published in ETA and same shall
be documented and submitted to Project Manager at the time of inspection. Design of
Anchor should be done as per ETAG 001 Annex C and TR045 using PROFIS Software as
per actual load data and site conditions as provided by structural consultant and the report
to be submitted to the project manager and design engineer for approval. Scanning before
drilling to be done with PS Scanning tool to avoid rebar hits. stud anchor HST3
M12x115-20
Page 457
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2124 Rebar 53.19 BDC 2 Supplying, drilling/cleaning hole and fixing of Torque Controlled Expansion Anchor Bd.C.2 Page No. 275 One Number 716 7
HST3, of sizes ranging from M8 to M24. The Anchor should be third party tested, possess
ETA approval and should be pre-assembled with a galvanized bolt as per EN ISO 4042:
1999, ingenious expansion sleeve M10 and M16 (galvanized) and M8, M12, M20, M24 -
Stainless Steel (EN ISO 4042: 1999), a nut of Strength Class 8 (EN ISO 20898-2:2012)
and a galvanized washer (EN ISO 4042:1999). The anchor should be approved for use in
Cracked Concrete. Anchor must be tested and approved as per Seismic C1 and C2
Category of TR045. ETA to have Fire Resistance values for up to 120 mins as per EOTA
TR 020 and FM Approval (use in Pipe Hangers). Anchor shall be fixed at right
embedment depth as per embedment mark and activated using AT Tool Module to ensure
adequate torque as per manufacture’s torque tolerance published in ETA and same shall
be documented and submitted to Project Manager at the time of inspection. Design of
Anchor should be done as per ETAG 001 Annex C and TR045 using PROFIS Software as
per actual load data and site conditions as provided by structural consultant and the report
to be submitted to the project manager and design engineer for approval. Scanning before
drilling to be done with PS Scanning tool to avoid rebar hits. stud anchor HST3 SSM12
x 115-20
2125 Rebar 53.20 BDC 2 Supplying, drilling/cleaning hole and fixing of Torque Controlled Expansion Anchor Bd.C.2 Page No. 275 One Number 464 7
HST3, of sizes ranging from M8 to M24. The Anchor should be third party tested, possess
ETA approval and should be pre-assembled with a galvanized bolt as per EN ISO 4042:
1999, ingenious expansion sleeve M10 and M16 (galvanized) and M8, M12, M20, M24 -
Stainless Steel (EN ISO 4042: 1999), a nut of Strength Class 8 (EN ISO 20898-2:2012)
and a galvanized washer (EN ISO 4042:1999). The anchor should be approved for use in
Cracked Concrete. Anchor must be tested and approved as per Seismic C1 and C2
Category of TR045. ETA to have Fire Resistance values for up to 120 mins as per EOTA
TR 020 and FM Approval (use in Pipe Hangers). Anchor shall be fixed at right
embedment depth as per embedment mark and activated using AT Tool Module to ensure
adequate torque as per manufacture’s torque tolerance published in ETA and same shall
be documented and submitted to Project Manager at the time of inspection. Design of
Anchor should be done as per ETAG 001 Annex C and TR045 using PROFIS Software as
per actual load data and site conditions as provided by structural consultant and the report
to be submitted to the project manager and design engineer for approval. Scanning before
drilling to be done with PS Scanning tool to avoid rebar hits. stud anchor HST3 SS
M8x95-30
Page 458
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2126 Rebar 53.21 BDC 2 Supplying, drilling/cleaning hole and fixing of Torque Controlled Expansion Anchor Bd.C.2 Page No. 275 One Number 1112 9
HST3, of sizes ranging from M8 to M24. The Anchor should be third party tested, possess
ETA approval and should be pre-assembled with a galvanized bolt as per EN ISO 4042:
1999, ingenious expansion sleeve M10 and M16 (galvanized) and M8, M12, M20, M24 -
Stainless Steel (EN ISO 4042: 1999), a nut of Strength Class 8 (EN ISO 20898-2:2012)
and a galvanized washer (EN ISO 4042:1999). The anchor should be approved for use in
Cracked Concrete. Anchor must be tested and approved as per Seismic C1 and C2
Category of TR045. ETA to have Fire Resistance values for up to 120 mins as per EOTA
TR 020 and FM Approval (use in Pipe Hangers). Anchor shall be fixed at right
embedment depth as per embedment mark and activated using AT Tool Module to ensure
adequate torque as per manufacture’s torque tolerance published in ETA and same shall
be documented and submitted to Project Manager at the time of inspection. Design of
Anchor should be done as per ETAG 001 Annex C and TR045 using PROFIS Software as
per actual load data and site conditions as provided by structural consultant and the report
to be submitted to the project manager and design engineer for approval. Scanning before
drilling to be done with PS Scanning tool to avoid rebar hits. stud anchor HST3 SS
M16x145-45
2127 Rebar 53.22 BDC 2 Supplying, drilling/cleaning hole and fixing of Torque Controlled Expansion Anchor Bd.C.2 Page No. 275 One Number 785 11
HST3, of sizes ranging from M8 to M24. The Anchor should be third party tested, possess
ETA approval and should be pre-assembled with a galvanized bolt as per EN ISO 4042:
1999, ingenious expansion sleeve M10 and M16 (galvanized) and M8, M12, M20, M24 -
Stainless Steel (EN ISO 4042: 1999), a nut of Strength Class 8 (EN ISO 20898-2:2012)
and a galvanized washer (EN ISO 4042:1999). The anchor should be approved for use in
Cracked Concrete. Anchor must be tested and approved as per Seismic C1 and C2
Category of TR045. ETA to have Fire Resistance values for up to 120 mins as per EOTA
TR 020 and FM Approval (use in Pipe Hangers). Anchor shall be fixed at right
embedment depth as per embedment mark and activated using AT Tool Module to ensure
adequate torque as per manufacture’s torque tolerance published in ETA and same shall
be documented and submitted to Project Manager at the time of inspection. Design of
Anchor should be done as per ETAG 001 Annex C and TR045 using PROFIS Software as
per actual load data and site conditions as provided by structural consultant and the report
to be submitted to the project manager and design engineer for approval. Scanning before
drilling to be done with PS Scanning tool to avoid rebar hits. Safety stud anchor HST3
M20x170
Page 459
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2128 Rebar 53.23 BDC 2 Supplying, drilling/cleaning hole and fixing of Torque Controlled Expansion Anchor Bd.C.2 Page No. 275 One Number 2581 11
HST3, of sizes ranging from M8 to M24. The Anchor should be third party tested, possess
ETA approval and should be pre-assembled with a galvanized bolt as per EN ISO 4042:
1999, ingenious expansion sleeve M10 and M16 (galvanized) and M8, M12, M20, M24 -
Stainless Steel (EN ISO 4042: 1999), a nut of Strength Class 8 (EN ISO 20898-2:2012)
and a galvanized washer (EN ISO 4042:1999). The anchor should be approved for use in
Cracked Concrete. Anchor must be tested and approved as per Seismic C1 and C2
Category of TR045. ETA to have Fire Resistance values for up to 120 mins as per EOTA
TR 020 and FM Approval (use in Pipe Hangers). Anchor shall be fixed at right
embedment depth as per embedment mark and activated using AT Tool Module to ensure
adequate torque as per manufacture’s torque tolerance published in ETA and same shall
be documented and submitted to Project Manager at the time of inspection. Design of
Anchor should be done as per ETAG 001 Annex C and TR045 using PROFIS Software as
per actual load data and site conditions as provided by structural consultant and the report
to be submitted to the project manager and design engineer for approval. Scanning before
drilling to be done with PS Scanning tool to avoid rebar hits. stud anchor HST3 SS
M20x170
2129 Rebar 53.24 BDC 2 Supplying, drilling/cleaning hole and fixing of Torque Controlled Expansion Anchor Bd.C.2 Page No. 275 One Number 144 38
HST3, of sizes ranging from M8 to M24. The Anchor should be third party tested, possess
ETA approval and should be pre-assembled with a galvanized bolt as per EN ISO 4042:
1999, ingenious expansion sleeve M10 and M16 (galvanized) and M8, M12, M20, M24 -
Stainless Steel (EN ISO 4042: 1999), a nut of Strength Class 8 (EN ISO 20898-2:2012)
and a galvanized washer (EN ISO 4042:1999). The anchor should be approved for use in
Cracked Concrete. Anchor must be tested and approved as per Seismic C1 and C2
Category of TR045. ETA to have Fire Resistance values for up to 120 mins as per EOTA
TR 020 and FM Approval (use in Pipe Hangers). Anchor shall be fixed at right
embedment depth as per embedment mark and activated using AT Tool Module to ensure
adequate torque as per manufacture’s torque tolerance published in ETA and same shall
be documented and submitted to Project Manager at the time of inspection. Design of
Anchor should be done as per ETAG 001 Annex C and TR045 using PROFIS Software as
per actual load data and site conditions as provided by structural consultant and the report
to be submitted to the project manager and design engineer for approval. Scanning before
drilling to be done with PS Scanning tool to avoid rebar hits. stud anchor HST3
M24x200 30
Page 460
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2130 Rebar 53.25 BDC 2 Supplying, drilling/cleaning hole and fixing of Torque Controlled Expansion Anchor Bd.C.2 Page No. 275 One Number 3326 13
HST3, of sizes ranging from M8 to M24. The Anchor should be third party tested, possess
ETA approval and should be pre-assembled with a galvanized bolt as per EN ISO 4042:
1999, ingenious expansion sleeve M10 and M16 (galvanized) and M8, M12, M20, M24 -
Stainless Steel (EN ISO 4042: 1999), a nut of Strength Class 8 (EN ISO 20898-2:2012)
and a galvanized washer (EN ISO 4042:1999). The anchor should be approved for use in
Cracked Concrete. Anchor must be tested and approved as per Seismic C1 and C2
Category of TR045. ETA to have Fire Resistance values for up to 120 mins as per EOTA
TR 020 and FM Approval (use in Pipe Hangers). Anchor shall be fixed at right
embedment depth as per embedment mark and activated using AT Tool Module to ensure
adequate torque as per manufacture’s torque tolerance published in ETA and same shall
be documented and submitted to Project Manager at the time of inspection. Design of
Anchor should be done as per ETAG 001 Annex C and TR045 using PROFIS Software as
per actual load data and site conditions as provided by structural consultant and the report
to be submitted to the project manager and design engineer for approval. Scanning before
drilling to be done with PS Scanning tool to avoid rebar hits. stud anchor HST3 SS
M24x200 30
2131 Rebar 53.26 BDC 2 Suppling, Drilling/Cleaning hole and fixing make heavy duty ETA Approved Chemical Bd.C.2 Page No. 275 One Number 390 8
Anchor of appropriate size and fixing plates subsequently. Anchor comprises of HVU-2
flexible foil capsule that contains styrene free Urethane Methacrylate resin, hardener,
quartz, sand/corundum and HAS-U threaded rod of minimum 5.8 steel grade, galvanized
to minimum 5 microns. Anchor should be approved for cracked concrete, seismic &
diamond drill holes. Manufacture should submit Anchor Design report based on design
loads & other parameters as provided by consultants. Chemical anchors should be
designed in accordance with EOTA-TR-029 “guidelines for anchorage of chemical
anchors for use in concrete” for approval. Application at site should be done as per
manufacturer guidelines. Any report submittal with Installation pictures should be done
using CFS-DM Software, which shall be charged extra. Anchor HVU2+ HAS U
M10X90-21
Page 461
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2132 Rebar 53.27 BDC 2 Suppling, Drilling/Cleaning hole and fixing make heavy duty ETA Approved Chemical Bd.C.2 Page No. 275 One Number 584 8
Anchor of appropriate size and fixing plates subsequently. Anchor comprises of HVU-2
flexible foil capsule that contains styrene free Urethane Methacrylate resin, hardener,
quartz, sand/corundum and HAS-U threaded rod of minimum 5.8 steel grade, galvanized
to minimum 5 microns. Anchor should be approved for cracked concrete, seismic &
diamond drill holes. Manufacture should submit Anchor Design report based on design
loads & other parameters as provided by consultants. Chemical anchors should be
designed in accordance with EOTA-TR-029 “guidelines for anchorage of chemical
anchors for use in concrete” for approval. Application at site should be done as per
manufacturer guidelines. Any report submittal with Installation pictures should be done
using CFS-DM Software, which shall be charged extra. AnchorHVU2+ HAS U M12x110-
90
2133 Rebar 53.28 BDC 2 Suppling, Drilling/Cleaning hole and fixing make heavy duty ETA Approved Chemical Bd.C.2 Page No. 275 One Number 926 9
Anchor of appropriate size and fixing plates subsequently. Anchor comprises of HVU-2
flexible foil capsule that contains styrene free Urethane Methacrylate resin, hardener,
quartz, sand/corundum and HAS-U threaded rod of minimum 5.8 steel grade, galvanized
to minimum 5 microns. Anchor should be approved for cracked concrete, seismic &
diamond drill holes. Manufacture should submit Anchor Design report based on design
loads & other parameters as provided by consultants. Chemical anchors should be
designed in accordance with EOTA-TR-029 “guidelines for anchorage of chemical
anchors for use in concrete” for approval. Application at site should be done as per
manufacturer guidelines. Any report submittal with Installation pictures should be done
using CFS-DM Software, which shall be charged extra. Anchor HVU2+ HAS U M16x125
2134 Rebar 53.29 BDC 2 Suppling, Drilling/Cleaning hole and fixing make heavy duty ETA Approved Chemical Bd.C.2 Page No. 275 One Number 1561 11
Anchor of appropriate size and fixing plates subsequently. Anchor comprises of HVU-2
flexible foil capsule that contains styrene free Urethane Methacrylate resin, hardener,
quartz, sand/corundum and HAS-U threaded rod of minimum 5.8 steel grade, galvanized
to minimum 5 microns. Anchor should be approved for cracked concrete, seismic &
diamond drill holes. Manufacture should submit Anchor Design report based on design
loads & other parameters as provided by consultants. Chemical anchors should be
designed in accordance with EOTA-TR-029 “guidelines for anchorage of chemical
anchors for use in concrete” for approval. Application at site should be done as per
manufacturer guidelines. Any report submittal with Installation pictures should be done
using CFS-DM Software, which shall be charged extra. Anchor HVU2+ HAS U M20x170
Page 462
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2135 Rebar 53.30 BDC 2 Suppling, Drilling/Cleaning hole and fixing make heavy duty ETA Approved Chemical Bd.C.2 Page No. 275 One Number 2132 14
Anchor of appropriate size and fixing plates subsequently. Anchor comprises of HVU-2
flexible foil capsule that contains styrene free Urethane Methacrylate resin, hardener,
quartz, sand/corundum and HAS-U threaded rod of minimum 5.8 steel grade, galvanized
to minimum 5 microns. Anchor should be approved for cracked concrete, seismic &
diamond drill holes. Manufacture should submit Anchor Design report based on design
loads & other parameters as provided by consultants. Chemical anchors should be
designed in accordance with EOTA-TR-029 “guidelines for anchorage of chemical
anchors for use in concrete” for approval. Application at site should be done as per
manufacturer guidelines. Any report submittal with Installation pictures should be done
using CFS-DM Software, which shall be charged extra. Anchor HVU2+ HAS U M24x300
2136 Rebar 53.31 BDC 2 Suppling, Drilling/Cleaning hole and fixing make heavy duty ETA Approved Chemical Bd.C.2 Page No. 275 One Number 6300 19
Anchor of appropriate size and fixing plates subsequently. Anchor comprises of HVU-2
flexible foil capsule that contains styrene free Urethane Methacrylate resin, hardener,
quartz, sand/corundum and HAS-U threaded rod of minimum 5.8 steel grade, galvanized
to minimum 5 microns. Anchor should be approved for cracked concrete, seismic &
diamond drill holes. Manufacture should submit Anchor Design report based on design
loads & other parameters as provided by consultants. Chemical anchors should be
designed in accordance with EOTA-TR-029 “guidelines for anchorage of chemical
anchors for use in concrete” for approval. Application at site should be done as per
manufacturer guidelines. Any report submittal with Installation pictures should be done
using CFS-DM Software, which shall be charged extra. Anchor HVU2+ HAS U M30 x
270
Page 463
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2137 Ceiling and 53.32 As directed by ACOUSTICAL WOODWOOL WALL PANELLING: Providing & fixing of 100% As directed by One Square 6585 301
roofing ( New Engineer in charge Natural Material- Magnesite (Hygroscopic & biologically sound binding agent) bonded Engineer in charge Metre
Item ) woodwool Heradesign planks of 600Mm*1200Mm *25Mm thickness made out of wood
wool fibre of width 1Mm Fiber thickness mixed with Natural water & Magnesite (No-
Cement) with open & smooth surface texture, Weight of panel to be 11.3 Kg/m2. A
Completly harmless Envirenment & Human Friendly & also a disposable or recyclable
Material & can last for more than 80 Years in building interiors As it has long lifespan &
suitable for Indoor conditions with relative air humidity of upto 90%. Magnesite protects
the wood cells against ageing & fungal attack. To achive upto NRC=1.00 it should be a
clear gap of 200Mm from wall slab along with the backing of Mineral wool of 50mm
thick with 64 kg/m3 density. Ecologically Sound Material with high mechanical strength
with Crash test of 90Km/H with Ball Impact Test DIN18032 & EN13964 with flying
colors & A sustainable material (PEFC & FSC Certified) along with EPD Certified Acc.
to EN ISO 14025 (AUB-Envirenmental Product declaration). Manufacturing tolerance for
nominal size: Length, Width & Thickness ± 1 mm, & In a Standard Climate of 23° C and
50% rel. humidity. FIXING & SUBSTRUCTURE: Impact Resitant According to DIN-
18023 or EN13964 to be Fixed on CD Sections Profile framework with Screw 9Pc/Panel
& Centre Distance Support of 300Mm & Centre distance of Cross Profile would be at
600Mm & Main Profile at 900Mm CD Profile is made out of GI( Sections Profile
60/27/0.6Mm-0.6MmThick x 60Mm Width x 0.27Mm height). The Main Profile is in the
legth of 3000Mm & to form a section of 600mm x 1200mm. Heradesign Superfine panels
to be fixed on the wall with a minimum of 200Mm void or gap with Galvanized screws of
length 50Mm & Dia 4.5Mm with a backing of Mineral Wool of density 64kg/m3 density
(50mm thick).Colour Of Panels : NATURAL BEIGE, Can be Painted to the desired
colour (Any- RAL, NCS or StoColor Shades) using water based color by Spray method
prior to installation. FIRE CLASS as per EN 13501-1:B –s1, d0. Test Certificates to be
submitted.
Page 464
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2138 Ceiling and 53.33 As directed by ACOUSTICAL WOODWOOL FALSE CEILING: Providing & fixing of 100% Natural As directed by One Square 7632 301
roofing ( New Engineer in charge Material- Magnesite (Hygroscopic & biologically sound binding agent) bonded woodwool Engineer in charge Metre
Item ) Heradesign planks of 600Mm*1200Mm *25Mm thickness made out of wood wool fiber
of width 1Mm Fiber thickness mixed with Natural water & Magnesite (No-Cement) with
open & smooth surface texture, Weight of panel to be 11.3 Kg/m2. A Completely
harmless Environment & Human Friendly & also a disposable or recyclable Material &
can last for more than 80 Years in building interiors As it has long lifespan & suitable for
Indoor conditions with relative air humidity of upto 90%. Magnesite protects the wood
cells against ageing & fungal attack. To achieve upto NRC=1.00 it should be a clear gap
of 200Mm from wall slab along with the backing of Mineral wool of 50mm thick with 64
kg/m3 density. Ecologically Sound Material with high mechanical strength with Crash test
of 90Km/H with Ball Impact Test DIN18032 & EN13964 with flying colors & A
sustainable material (PEFC & FSC Certified) along with EPD Certified Acc. to EN ISO
14025 (AUB-Environmental Product declaration). Manufacturing tolerance for nominal
size: Length, Width & Thickness ± 1 mm, & In a Standard Climate of 23° C and 50% rel.
humidity. FIXING & SUBSTRUCTURE: Impact Resistant According to DIN-18023 or
EN13964 to be Fixed on CD Sections Profile framework with Screw 9Pc/Panel & Centre
Distance Support of 300Mm & Centre distance of Cross Profile would be at 600Mm &
Main Profile at 900Mm CD Profile is made out of GI( Sections Profile 60/27/0.6Mm-
0.6MmThick x 60Mm Width x 0.27Mm height). The Main Profile is in the length of
3000mm & to form a section of 600mm x 1200mm. The CD Profile is to be suspended
from soffit with the help of nonius hanger at a center distance of 900mm. UD Profile
28/27/0.6mm to be fixed on wall at the perimeter of the wall. If the main CD profile needs
to extended, it needs to be connected with CD profile connector 60/27. The CD profiles to
be connected to each other at the intersection by CD cross connector. Heradesign
Superfine panels to be fixed to the ceiling with a minimum of 200mm void or gap with
Galvanized screws of length 50Mm & Dia 4.5Mm with a backing of Mineral Wool of
density 64kg/m3 density (50mm thick). Colour pf Panels : NATURAL BEIGE, Can be
Painted to the desired colour (Any- RAL, NCS or StoColor Shades) using water based
color by Spray method prior to installation. FIRE CLASS as per EN 13501-1:B –s1, d0.
Page 465
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2139 Ceiling and 53.34 As directed by METAL FALSE CEILING WITHOUT SUSPENSION SUPPORT FROM TRUE As directed by One Square 6511 376
roofing ( New Engineer in charge CEILING: Providing & fixing horizontal level suspended metal ceilings comprising of Engineer in charge Metre
Item ) Metalworks F-H 600 Hook-on corridor system manufactured by Armstrong Ceiling
Solutions with Rectangular panels made of 0.7mm thick Galvanised Steel (GI) of 120gsm,
post coated to Global White colour, suitable for Interior applications and architectural
finishes, double grid concealed system and butt joint panels. The panel width shall be
300mm, length ranging from 1500mm to 2660mm. General Specifications:Entire system
to be designed for Interior applications, and concealed Grid, Butt joint panels. Panel
Specifications: Material: The F-H 600 rectangular Hook-on panels to be made of
galvanized steel (GI) of minimum 120gsm hot dipped galvanization (both sides included)
as per IS 277 (2003), zero or minimum spangled, in minimum base material thickness of
0.7mm as per in IS:513 (1994). Dimensions: The panel Length varies between 1500mm to
2660mm, panel Width shall be 300mm. The dimensional tolerances for length shall be
±1.0m up to 1000mm L; ±1.5mm between 1001 to 2000mm L; ±2.0mm between 2001 to
3000mm L. The dimensional tolerances for width shall be ±0.5m up to 300mm W.
Dimensional Tolerances for panel Thickness / panel width / panel length - to be measured
in accordance with TAIM standards. Edge detail: the panels shall ha+A3ve Square Edge,
with a 3mm(W) x 8mm(H) black foam gasket glued at the edges, typically on one long
and one short side. All adjacent panels shall touch each other forming a butt joint and
concealed grid visuals. Upturns: The short side of the panel shall have vertical upturns of
minimum 30mm (H) and shall be bent appropriately bent as per the manufacturer’s
specifications for providing hook-on ends. The long side shall have inside horizontal
bends of 5-15mm for rigidity and vertical upturns of 40mm (for length ranging from 1251-
2660mm). Surface Finish: Plain: The panels shall be in plain unperforated finish (without
any acoustical backing / felt). Colour and finishes: The panel surface shall be
electrostatically powder coated (post coat) on visible side after mechanical production,
using RoHS compliant powder, to achieve coating thickness ranging from 60-80µ and
architectural quality finish. The powder coating shall pass Salt Spray Test for 750 Hours
as per ASTM B117, QUV –A Test for 1000hours as per ASTM G-154 – (Cycle – 1) and
Humidity test for 1000hours as per DIN 50017, 250 hours of condensation test (as per
Page 466
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Page 467
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2140 Ceiling and 52.35 As directed by METAL BAFFLE CEILING : Providing & fixing of horizontal level suspended ceiling As directed by One Square 13131 301
roofing ( New Engineer in charge comprising of Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Engineer in charge Metre
Item ) Aluminum alloy grade 6063 T5. The baffle blade shall be in size of 100x25x3600mm in
powder coated to Woodgrain/Plain finish (Red Oak, Cherry, Black & White).. The baffle
shall be electrostatically polyester powder coated to a coating thickness of 60-80 micron.
The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV
–A Test for 1000hours as per ASTM G-154 – (Cycle – 1) and Humidity test for
1000hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per
EN ISO 2409. The shade variation within a manufacturing batch shall be delta E<1 using
Excite/BYK Gardner instrument and gloss level 25±5 at 60˚ as per ASTM D523 (Not
applicable of Wood Grain Shade). The baffle blade shall be suspended using Slotted U-
profile of 20 x 30 x 3700mm (Thk-1.5mm) having slots in module of 25mm to keep
baffles at an on-center spacing in multiples of 25mm. Longer lengths of Baffle to be
connected by Baffle Joiner and the ends to be fixed with End caps..SUSPENSION: Shall
be hanged using baffle hanger from U-profile made of mild steel with powder coating
thickness of 60-80 micron. The U – profile to comprise of alternate square & rectangular
slots of 6.5x6.5mm & 28x6.5mm respectively on the web for locking the baffle hanger
using plugin clip to secure the hanger in perfect position and achieve uniform spacing
between baffles. The overall dimension of the U – profile is 20(W) x 30(H) x 3750(L) mm
and is rolled form from 1.5mm thick mild steel with a powder coating thickness of 60-
80micron. U- Profile to be connected to each other using U –Profile Splice. The U- profile
shall be hanged from the true ceiling using threaded rod using a U- Profile hanger. The
Baffle along with suspension system used together shall carry a 10 year warranty against
manufacturing defect and manufacturer shall provide a warranty certificate. The supply
shall be backed by a Manufacturing Test Certificate.
Page 468
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Page 469
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2141 Ceiling and 53.36 As directed by METAL OPEN CELL CEILING : Providing & fixing horizontal level Open cell As directed by One Square 3530 301
roofing ( New Engineer in charge Aluminium lay-in ceiling tiles with border panels forming board edge of size Engineer in charge Metre
Item ) 600x600x38mm (Nominal) having cell size of 100x100mm made of AA-3003-H14
(Tempered) grade Aluminium suitable for architectural finishes in 0.35mm thickness as
per in IS:2676 (1981) in Global white color. The tile shall be electrostatically polyester
powder coated using RoHS compliant powder having coating thickness ranging from 60-
80 microns. The powder coating shall pass Salt Spray Test for 750 hours as per ASTM
B117, QUV –A Test for 1000 hours as per ASTM G-154 – (Cycle – 1) and Humidity test
for 1000 hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as
per EN ISO 2409. The shade variation across batches shall be delta E<1 using
Excite/BYK Gardner instrument and gloss level of 25±5% at 60˚ as per ASTM D523. Tile
shall have a Fire Performance class A as per GB 8624-2012. SUSPENSION: The tile shall
be laid on 15 mm wide T - section flanges colour global white (matching to tile colour)
having double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm &
600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of
the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and
main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection
loading of 15kg/m. The end details of the cross tee shall be made of pre hardened steel
clip fixed to the ends of the cross tee to provide double locking between “cross tee to
cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to
cross tee connection shall have a pull out strength of more than 100kg. The T Sections
shall be made of hot dipped galvanized steel 90 gsm and pre-painted steel with baked
polyester paint of 0T bending capability. , The Tile & Grid system used together shall
carry a 10 year warranty against manufacturing defect and manufacturer shall provide a
warranty certificate. The Tile & Grid shall have the manufacturers name embossed/printed
on it. The supply shall be backed by a Manufacturing Test Certificate. INSTALLATION:
To comprise main runner spaced at 1200mm securely fixed to the structural soffit using
suspension system (specifications below) at 1200mm maximum. The First/Last
suspension system at the end of each main runner shall not be greater than 450mm from
the adjacent wall along with the first and the last main beam shall be at less than 600mm
Page 470
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2142 Ceiling and 53.37 As directed by ACOUSTICAL GLASS FIBRE FALSE CEILING BLADES : Providing and Fixing As directed by One Square 17457 301
roofing ( New Engineer in charge Acoustical blade which are 40 mm thick, flat glass fibre panels with Humidity Resistance Engineer in charge Metre
Item ) RH 90%, with factory fitted embedded metal insert with ¼” – 20 threading for fixing
cable adjuster for hanging application. Acoustical blades shall have sizes of 200x1200mm,
200x1600mm, 400x1200mm, 400x1600mm, 400x1800mm, 500x1200mm or
500x1600mm with both side laminated scrim finished with uniform water based paint on
all surface (including edges). Acoustical performance of 0.65 NRC(for 400mm high x
40mm thick baffles with 400mm on centre distance and overall depth of construction
1000mm) as per ASTM C-423 (Average value of Absorption Co-efficient readings taken
at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) in standard White color with Light reflectance
87% or in the color specified by the Architect (Shell / Tangerine / Cranberry / Moss /
Kiwi / Reef / Lagoon), Fire Performance Class B2 – s1, d0 as per EN 13501-1 .The blade
shall be made of Glass fibre panel with density of 110-120 Kg/ m3. SUSPENSION: The
panel shall be hung using hanging kit comprising of griper structure anchor & cap of dia
20mm, spring loaded bottom end cable adjuster of dia. 9mm and 2.4m long aircraft cable
of 1/16” dia. The Blade along with suspension system shall carry a 1 year warranty
against manufacturing defect and manufacturer shall provide a warranty certificate. The
supply shall be backed by a Manufacturing Test Certificate.
Page 471
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2143 Ceiling and 53.38 As directed by ACOUSTICAL GLASS FIBRE FALSE CEILING CLOUDS & SHAPES : Providing and As directed by One Square 17751 226
roofing ( New Engineer in charge Fixing Acoustical Clouds/Shapes - Acoustical clouds which are 30 mm thick, flat glass Engineer in charge Metre
Item ) fibre panels of Humidity Resistance RH 95%, with embedded frame made of aluminium
extruded section of 38X10mm of grade 6063-T6 as per dimension mentioned in below
table for reinforcement and secured hanging. Embedded extrusion shall have grub slot
with pre inserted nut for group hanging and connected using Aluminium die casted corner
connector with ¼” – 20 threading for hanging using cable adjuster for independent clouds.
The form of Acoustical Clouds/Shapes - shall be Square / Convex / Concave / Circle /
Hexagon / Trapezoid / Parallelogram (Left & Right) / Rectangle (Small & Large) in
standard Traffic White color with light reflectance 90% as per ASTM 1477-98 or in the
color specified by the Architect / Engineer in charge (Shell / Tangerine / Cranberry / Moss
/ Kiwi / Reef / Lagoon). The Acoustical Clouds/Shapes shall be made of Glass fibre panel
with density of 110-120 Kgs/m3 along with acoustical sound absorbing scrim on the face
to achieve sound absorption as per below mentioned table in accordance to EN ISO 354
:2003 (average of 500-4000Hz) . The face and edges shall be finished with matching
water based texture paint. Shape Nominal Size and Sound Absorption – Metric Sabin
1. Square 1170x1170mm - 2.48 Metric Sabin 2. Convex 1170x1140mm 2.28 Metric
Sabin 3. Concave 1170x1140mm 1.94 Metric Sabin 4. Circle 1170 Dia. 2.12 Metric Sabin
5. Hexagon 1170x1010mm 1.61 Metric Sabin 6. Trapezoid 1170x1170mm 2.15 Metric
Sabin 7. Left Parallelogram 1170x1170mm 2.15 Metric Sabin 8. Right Parallelogram
1170x1170mm 2.15 Metric Sabin.The panel shall be hung as per the following based on
the installation. Individual Suspension - The panel shall be hung using deck hanging kit
comprising of griper structure anchor & cap of dia. 20mm, spring loaded bottom end cable
adjuster of dia. 9mm and 2.4m long aircraft cable of 1/16” dia. The One Number of deck
hanger will be as per Table 1 above.
Page 472
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
The Acoustical Clouds/Shapes shall carry a 1 year warranty against manufacturing defect
and supported by a manufacturer warranty certificate. The supply shall be backed by a
Manufacturing Test Certificate. Suspension System Details Components 1) Griper
structure anchor, 2) Gripper anchor cap 3) Cable adjuster 4) Aircraft Cable Cable adjuster
Spring loaded bottom end cable adjuster of dia. 9mm and 45mm long Aircraft cable
Material Galvanized Steel Aircraft cable dimension 1/16” Ø x 2.4m Tolerance ±1mm
INSTALLATION: Individual Suspension. The panels to be suspended individually using
the Acoustical Clouds/Shapes Deck hanging kit as per the One Number specified in above
Table 1. Hanger Wire Attachment to Structure: Attach the gripper structure anchor to the
true ceiling using an appropriate fastener (1/4"-20 Threading) that will carry the full
weight of the panels. Insert the end of the cable into the gripper anchor cap. Screw the
gripper anchor cap completely into the gripper structure anchor.The panel to be suspended
using the aircraft cables from the soffit by fixing the cap end of the cable to gripper
structure anchors and the other end passing through the bottom end cable adjuster. The
height & level of the panels can be adjusted using the bottom end cable adjusters.Suspend
the Acoustical Clouds/Shapes by locating and screwing the bottom end of the cable
adjuster into the threading of the connector. The height & level of the panels can be
adjusted using the bottom end cable adjusters.
Page 473
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2144 Ceiling and 53.39 As directed by CUSTOM PRINTED ACOUSTICAL FALSE CEILING :Providing & Fixing of Custom As directed by One Square 7410 226
roofing ( New Engineer in charge color Printed Mineral Fibre Acoustical Suspended Ceiling System with 19mm thick Engineer in charge Metre
Item ) Microlook 90 Edge Tiles with 15mm face exposed grid. The tiles shall have smooth bright
laminated visual with Humidity Resistance (RH) of 99%, NRC 0.7 (Average value of
Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per
ASTM C423 standard, CAC of 41db as per ASTM E1414, Light Reflectance ≥87% as per
ASTM E-1477, Thermal Conductivity k = 0.045 - 0.048 W/mK, Colour Global White,
Fire Performance of Class 0/1 as per BS 476 Part6/7 and Class A as per ASTM E 84 with
19mm Square Tegular/Microlook 90˚ edge and 8mm drop in module size of 600 x
600mm. The scrim on the face of the tile shall be cleanable, soil and scratch resistant and
having superior scrub-ability (Gardner Test). The tiles shall be classified as ISO 14644-1
cleanroom class 5. The tile shall have a rating of 8 or above for tests conducted for
Resistance to growth of Mold in accordance to ASTM D3273. It shall be suitable for
Green Building application, with Recycled content of 36%. The tile shall have
certifications from GRIHA and GreenPro thereby confirming that it is an environment
friendly product. SUSPENSION: The tile shall be laid on with 15 mm wide T - section
flanges colour global white (matching to tile color) having roll formed double stroke
rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees
with a web height of 38mm (all sections). The deflection loading of the system shall be
12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as
per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m.
The end details of the cross tee shall be made of pre hardened steel and fixed to the ends
of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee
to main beam”. All main beam to main beam and cross tee to cross tee connection shall
have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped
galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester
paint with 0T bending capability. All border cross tee/main beam shall be levelled using
perimeter fill.
Page 474
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Page 475
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2145 Ceiling and 53.40 As directed by PRIVIDING AND FIXING METAL WALL PANELLING: W-H 1100 Hook-on wall As directed by One Square 12770 301
roofing ( New Engineer in charge cladding system manufactured by Armstrong Ceiling Solutions with Rectangular panels Engineer in charge Metre
Item ) made of 1.0mm thick Galvanised Steel (GI) of 120gsm, post coated to wood grain finish,
suitable for Interior applications and architectural finishes, wall mounted concealed grid
system and butt joint panels. The panel width shall be 495mm, length ranging from
300mm to 1195mm.
General Specifications: Entire system to be designed in accordance with EN 13964 and
TAIM e.V. quality guidelines suitable for Green Building Application for Interior
applications, and concealed Grid, Butt joint panels.Panel Specifications: Material: The W-
H 1100 rectangular Hook-on panels to be made of galvanized steel (GI) of minimum
120gsm hot dipped galvanization (both sides included) as per IS 277 (2003), zero or
minimum spangled, in minimum base material thickness of 1.0mm as per in IS:513 (1994)
Dimensions: The panel Length varies between 300mm to 1195mm, panel Width is
495mm. The dimensional tolerances for length shall be ±1.0m up to 1000mm L; ±2.0mm
between 1001 to 2000mm L;. The dimensional tolerances for width shall be ±0.75m up to
600mm W;. Dimensional Tolerances for panel Thickness / panel width / panel length - to
be measured in accordance with TAIM standards. Edge detail: The panels shall have
Square Edge, with a 5mm(W) x 8mm(H) black foam gasket glued at the edges, typically
on one long and one short side. All adjacent panels shall touch each other forming a butt
joint and concealed grid visuals. Upturns: The hook side of the panel shall have vertical
upturns of minimum 30mm (H) and shall be bent appropriately bent as per the
manufacturer’s specifications for providing hook-on ends. The long side shall have inside
horizontal bends of around 10mm for rigidity and vertical upturns of 30mm.Surface
Finish: Plain / Perforated: The panels shall be in plain or perforated finish with acoustical
backing / felt. Colour and finishes: The panel surface shall be electrostatically powder
coated (post coat) on visible side after mechanical production, using RoHS compliant
powder, to achieve coating thickness ranging from 60-100µ and architectural quality
finish. The shade variation across batches shall be delta E (∆e) <1 measured using
Excite/BYK Gardner instrument and gloss level of 25±5% at 60˚ as per ASTM D523. The
shade to be White or std wood grain as approved by the Architect or Engineer-in-charge.
Page 476
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2146 Ceiling and 53.41 As directed by PRIVIDING AND FIXING MODULAR ACOUCTICAL WOODEN WALL As directed by One Square 10884 301
roofing ( New Engineer in charge PANELLING: Of nominal width 100 / 150mm, having 80mm wide panel with 20mm Engineer in charge Metre
Item ) reveal having a thickness of 15mm thickness and length 2400 mm. The panel shall be
made of a Moisture resistant fibre board substrate having a minimum density of 595
Kg/m3 with a laminated facing as per the approved shade (Portland Maple, Sea Beech,
Siam Wood & Mystique Walnut) and a melamine balancing layer on the reverse side. The
panel shall have 0.7mm PVC edge banding along the length side with a similar finish as
that of the face. The back of the panel shall have a black acoustic felt to cover the reveal of
20mm to attain an NRC of 0.4 for 150mm. / 0.5 for 100mm. module (Average value of
Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per
ASTM C423. The panels shall provide a Humidity Resistance (RH) of 70% with camber
limit less than 1mm/1000mm and bow less than 1mm/300mm. The back of the panels
shall be profile-grooved to receive 3600mm special main beam carrier with integrated
factory fitted clips for installation. SUSPENSION: The panels shall be upward mounted
on 24 mm wide T - section flanges having rotary stitching along the length of the beam
with a web height of 43mm. The Main Beam shall have integrated (factory fitted) locking
clips installed at 100 / 150mm centre to centre distance. The deflection loading of the
main beam tested as per ASTM C635 (Deflection limit less than L/360) shall be at least
21.4kg/m. The end details of the main beam shall be made of pre hardened steel and fixed
to the ends with 3 point fixing. All main beam to main beam connection shall have a pull
out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized
steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint
with 0T bending capability. Installation should be carried out as per Manufacturer
recommended procedure. The grid shall be installed with suspension system of
Manufacturer make.
Page 477
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
The panel & grid system used together shall carry a 1 year warranty against manufacturing
defect and manufacturer shall provide a warranty certificate. The panel & grid shall have
the manufacturers name embossed/printed on itself. The supply shall be backed by a
Manufacturer Test Certificate. CEILING INSTALLATION:
Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls at 450 mm
maximum centre to centre. Mount the wall angle around perimeter at desired height.
Install the main beam with factory fitted locking clip at a level 16mm above the wall angle
level. Main beam to be supported from the structure with 1st suspension not more than
300mm from the wall and distance between suspensions to be less than 900mm centre to
centre. Each main beam are to be place at 600mm centre to centre with the 1st main beam
at not more than 100mm from the wall. Install the panels one-by-one by inserting the
profile-groove at the back of the panel in the clips fitted on the main beam. Use a wood
splice accessory provided by Manufacturer to join planks. Continue installing rows of
planks till the actual length/width is achieved. Place the border panels on the wall angles
for a finished visual. Finish the edges using the edge banding tape to cover the cut edge of
the panel provided by Manufacturer.
Page 478
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Page 479
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Page 480
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2147 Ceiling and 53.42 As directed by PRIVIDING AND FIXING ANTIMICROBIAL ACOUSTICAL FALSE CEILING: As directed by One Square 2998 301
roofing ( New Engineer in charge Bioguard Mineral Fibre Acoustical Suspended Ceiling System with 19mm thick Acoustics Engineer in charge Metre
Item ) Microlook 90 Edge Tiles with 15mm face exposed grid. The tiles shall have smooth bright
laminated visual with Humidity Resistance (RH) of 99%, NRC 0.7 (Average value of
Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per
ASTM C423 standard, CAC of 41db as per ASTM E1414, Light Reflectance ≥87% as per
ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White,
Fire Performance of Class 0/1 as per BS 476 Part6/7 and Class A as per ASTM E 84 with
19mm Square Tegular/Microlook 90˚ edge and 8mm drop in module size of 600 x
600mm./ 600x1200mm. The scrim on the face of the tile shall be cleanable, washable up
to 500 cycle as per ASTM D-4828 and resistant to disinfectants. The tile shall be treated
with Anti Microbial coating on the face of the tile to achieve cleanroom classification of
class 5 (Class 100) as per ISO 14644-1 and suitable for zone 4 area having partical
emission under normal conditions of ISO 5, Decontamination Class of CP10 and
Bacteriological Cleanliness Class B1 for specific strains as per NF S 90-35:2003 The tile
shall have a rating of 8 or above (face) for tests conducted for Resistance to growth of
Mold in accordance to ASTM D3273. It shall be suitable for Green Building application,
with Recycled content of 35% having VOC and Formaldehyde emission rate less than
0.1mg/m2/hr. The tile shall have certifications from GRIHA and GreenPro thereby
confirming that it is an environment friendly product. SUSPENSION: The tile shall be
laid on 15 mm wide T - section flanges colour global white (matching to tile color) having
roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm
& 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading
of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below)
and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a
deflection loading of 15kg/m.
Page 481
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
The end details of the cross tee shall be made of pre hardened steel and fixed to the ends
of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee
to main beam”. All main beam to main beam and cross tee to cross tee connection shall
have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped
galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester
paint with 0T bending capability. All border cross tee/main beam shall be levelled using
perimeter fill. INSTALLATION: To comprise main runner spaced at 1200mm securely
fixed to the structural soffit using suspension system (specifications above) at 1200mm
maximum. The First/Last suspension system at the end of each main runner shall not be
greater than 450mm from the adjacent wall along with the first and the last main beam
shall be at less than 600mm from the wall. Flush fitting 1200mm long cross tees to be
interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross
tees longer than 600mm require independent support. 600 x 600mm module to be formed
by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.
Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls using screws at
450mm centre to centre maximum. Installation shall be carried out as per Manufacturer
recommended procedure. SUSPENSION SYSTEM accessories supplied by Manufacturer
consisting of M6 Anchor Fasteners with hanger hole, pre-straightened hanger wire of dia
– 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum
loading strength of 110 kgs. (Optionally, adjustable hook clips made of 0.7mm thick
Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to
be used for level adjustment during installation purpose in main runners).
Page 482
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2148 Ceiling and 53.43 As directed by PRIVIDING AND FIXING ACOUSTICAL FALSE CEILING WITH 0.7 NRC: Sierra As directed by One Square 2077 301
roofing ( New Engineer in charge Mineral Fibre Acoustical Suspended Ceiling System with 13mm thick Microlook Edge Engineer in charge Metre
Item ) Tiles with 15mm face exposed grid. The tiles shall have smooth laminated salt pepper
visual with Humidity Resistance (RH) of 95%, NRC 0.7 (Average value of Absorption Co-
efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423
standard, CAC of 28db as per ASTM E1414, Light Reflectance ≥85% as per ASTM E-
1477, Thermal Conductivity λ = 0.037W/mK, Colour Global White, Fire Performance of
class A2-s1, d0 according to EN 13501-1 with 13mm Microlook edge and 8mm drop in
module size of 600 x 600mm. The scrim on the face of the tile shall be cleanable. The tiles
shall be classified as ISO 14644-1 cleanroom class 5. It shall be suitable for Green
Building application, with Recycled content of 60%. The tile shall have certifications
from GRIHA and GreenPro thereby confirming that it is an environment friendly product.
SUSPENSION: The tile shall be laid on 15 mm wide T - section flanges colour global
white (matching to tile color) having roll formed double stroke rotary stitching on all T
sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of
38mm (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as per
standard installation layout mentioned below) and main beam tested as per ASTM C635
(Deflection limit less than L/360) with a deflection loading of 15kg/m. The end details of
the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to
provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All
main beam to main beam and cross tee to cross tee connection shall have a pull out
strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel
of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T
bending capability. All border cross tee/main beam shall be levelled using perimeter fill.
The Tile & Grid system used together shall carry a 10 year warranty against
manufacturing defect and manufacturer shall provide a warranty certificate. The Tile &
Grid shall have the manufacturers name embossed/printed on it. The supply shall be
backed by a Manufacturing Test Certificate.
Page 483
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Page 484
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2149 Ceiling and 53.44 As directed by PRIVIDING AND FIXING ACOUSTICAL FALSE CEILING WITH 0.9 NRC: Sierra As directed by One Square 2380 301
roofing ( New Engineer in charge Mineral Fibre Acoustical Suspended Ceiling System with 15mm thick Sierra OP Tegular Engineer in charge Metre
Item ) 15/90 Edge Tiles with Suprafine 15mm face exposed grid. The tiles shall have smooth
laminated visual with Humidity Resistance (RH) of 95%, NRC 0.90 (Average value of
Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per
ASTM C423 standard, CAC of 25db as per ASTM E1414, Light Reflectance ≥86% as per
ASTM E-1477, Thermal Conductivity λ = 0.040 W/mK, Colour Global White, Fire
Performance of class A2-s1, d0 according to EN 13501-1 with 15mm Tegular 15/90˚ edge
and 8mm drop in module size of 600 x 600mm. The scrim on the face of the tile shall be
cleanable and classified as ISO 14644-1 cleanroom class 5. It shall be suitable for Green
Building application, with Recycled content of 43% and VOC Emissions (French) class of
A+. The tile shall have Environmental Product Declaration as per ISO 14025 and EN
15804+A2. The tile shall have certifications from GRIHA and GreenPro thereby
confirming that it is an environment friendly product. SUSPENSION: The tile shall be
laid on Suprafine 38 with 15 mm wide T - section flanges colour global white (matching
to tile color) having roll formed double stroke rotary stitching on all T sections i.e. the
Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections).
The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation
layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less
than L/360) with a deflection loading of 15kg/m. The end details of the cross tee shall be
made of pre hardened steel and fixed to the ends of the cross tee to provide double locking
between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main
beam and cross tee to cross tee connection shall have a pull out strength of more than
100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS
277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability.
All border cross tee/main beam shall be levelled using perimeter fill.
Page 485
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
The Tile & Grid system used together shall carry a 10 year warranty against
manufacturing defect and manufacturer shall provide a warranty certificate. The Tile &
Grid shall have the manufacturers name embossed/printed on it. The supply shall be
backed by a Manufacturing Test Certificate.INSTALLATION: To comprise main runner
spaced at 1200mm securely fixed to the structural soffit using suspension system
(specifications above) at 1200mm maximum. The First/Last suspension system at the end
of each main runner shall not be greater than 450mm from the adjacent wall along with
the first and the last main beam shall be at less than 600mm from the wall. Flush fitting
1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x
600 mm module. Cut cross tees longer than 600mm require independent support. 600 x
600mm module to be formed by fitting 600mm long flush fitting cross tees centrally
between the 1200 mm cross tees. Perimeter trim to be wall angles of size
3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum.
Installation shall be carried out as per recommended procedure. SUSPENSION
SYSTEM accessories supplied by consisting of M6 Anchor Fasteners with hanger hole,
pre-straightened hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of
344-413 MPa and a minimum loading strength of 110 kgs. (Optionally, adjustable hook
clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm
and 4 mm aquiline wire to be used for level adjustment during installation purpose in
main runners).
2150 Ceiling and 53.45 As directed by NATURAL BAMBOO WALL PANELLING : Providing & fixing of Wooden Grill panel As directed by One Square 18751 226
roofing ( New Engineer in charge with backer made of natural bamboo with 24mm Face black exposed grid. The Grill Engineer in charge Metre
Item ) panels shall be made of rapidly renewable natural bamboo core having density
600+Kgs/m3 as per BS EN323 (1993) and bending strength of 96+ N/mm2 as per BS
EN310 (1993). The Grill panel shall have a seven layer UV coating of thickness 0.09-
0.11mm as per BS EN71 finished to natural or carbonized shades. The Grill panel shall be
of nominal size 35x300x2400mm comprising 8 blades/slats of 35x16x2376mm with
centre to centre spacing of 37.5mm fixed through Backer of size 12x22x300mm having
centre to centre spacing of 300mm and additional end backers at 150mm from both the
edges. The Grill panel shall have a fire performance of Class A according to ASTM-E84.
The Grill panel shall have moisture content of 8-14% as per IS 1708 (Part 1):1986 and a
Humidity Resistance (RH) of 70%.
Page 486
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2151 Ceiling and 53.46 As directed by NATURAL BAMBOO CEILING: Providing & fixing of Wooden Grill panel with backer As directed by One Square 20953 301
roofing ( New Engineer in charge made of natural bamboo with 24mm Face black exposed grid. The Grill panels shall be Engineer in charge Metre
Item ) made of rapidly renewable natural bamboo core having density 600+Kgs/m3 as per BS
EN323 (1993) and bending strength of 96+ N/mm2 as per BS EN310 (1993). The Grill
panel shall have a seven layer UV coating of thickness 0.09-0.11mm as per BS EN71
finished to natural or carbonized shades. The Grill panel shall be of nominal size
35x300x2400mm comprising 8 blades/slats of 35x16x2376mm with centre to centre
spacing of 37.5mm fixed through Backer of size 12x22x300mm having centre to centre
spacing of 300mm and additional end backers at 150mm from both the edges. The Grill
panel shall have a fire performance of Class A according to ASTM-E84. The Grill panel
shall have moisture content of 8-14% as per IS 1708 (Part 1):1986 and a Humidity
Resistance (RH) of 70%. SUSPENSION: The tile shall be installed on 24 mm wide T -
section flanges having rotary stitching on all T sections i.e. the Main Runner, 1200 mm &
600 mm Cross Tees with a web height of 43mm, 35mm and 30mm respectively. The
deflection loading of the system shall be 17.8 kg/m2 (as per standard installation layout
mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than
L/360) with a deflection loading of 21.4kg/m. The end details of the main beam and cross
tee shall be made of pre hardened steel fixed to the ends. The cross tee to provide double
locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to
main beam and cross tee to cross tee connection shall have a pull out strength of more
than 100kg. The T Sections shall be made of hot dipped galvanized steel of 100 gsm as
per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending
capability. All exposed panel ends to be covered using edge caps. All wall angles to be
covered using ledgers. Installation should be carried out as per Manufacturer
recommended procedure. The grid shall be installed with suspension system of
recommended make.
Page 487
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
INSTALLATION:
To comprise main runner spaced at 1200mm centre to centre securely fixed to the
structural soffit using suspension system (specifications below) at 1200mm maximum
centre. The First/Last suspension system at the end of each main runner should not be
greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be
interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut
cross tees longer than 600mm require independent support. 600 x 600mm module to be
formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm
cross tees. Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls at
450 mm maximum centre to centre. Metal spring backer clips shall be used to fix the Grill
panel to suspension system with a grid formation of 600mm along the blade/slat and 2
pieces along each backer (total 8 clips per full panel size) for every individual panel. Raise
the panel up against the suspension system and align the backers with the suspension
system. Push upwards on the spring backer clip to engage the clip tabs on to the
suspension system flange. Ensure that both clip tabs engage the suspension system
flange.SUSPENSION SYSTEM accessories manufactured and supplied by Manufacturer
consisting of M6 Anchor Fasteners with hanger hole, pre Straightened Hanger wire of dia
– 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum
loading strength of 110 kgs. Additionally, adjustable hook clips made of 0.7mm thick
Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to
be used for level adjustment during installation purpose in main runners.
2152 Expansion Joint 53.47 As directed by Providing and fixing interior wall to wall expansion joint cover model W90 for 50 mm As directed by One Running 2329 1008
( New Item ) Engineer in charge gap size, this surface mounted aluminium cover is designed for interior application where Engineer in charge Meter
low maintenance is desirable. This model is made using Aluminium alloy 6063 and
temper T5/T6. This cover is installed using stailness steel clip in the rear which helps the
movement to + 10 mm.
2153 Expansion Joint 53.48 As directed by Providing and fixing of external wall to wall cover model ASM 200X for 50 mm gap As directed by One Running 2689 1008
( New Item ) Engineer in charge size,this surface-mounted metal wall cover is designed for exterior applications where low Engineer in charge Meter
maintenance or tamper-resistant applications are desired. The free-floating aluminum
center plate spans the joint and slides over the surface of the wall to allow required
movement.EPDM vapor barrier to protect the joint with water. This profile is extruded
aluminum with ASTM B 221, Alloy 6063-T5. This profile has been tested under
Architectural Testing Agency ( an Intertek Company) for the movement performance. The
minimum opening of the profile is 10mm ( -40mm) and the maximum openeing of the
profile is 76mm (+26mm) which is more than ±50% movement.
Page 488
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2154 Expansion Joint 53.49 As directed by Providing and fixig of floor to floor expansion joint cover GFT 200 for 50 mm gap size. As directed by One Running 2987 1008
( New Item ) Engineer in charge The cover which is designed for interior floor to floor application suitable for most floor Engineer in charge Meter
finishes where frame depth and configuration is variable to suit selected finish. It is a
gasketed floor to floor joint cover comprises of extruded aluminium frames made of
aluminium alloy 6063 temper T5/ T6 and TPR seal having strength of 90 shore A as per
ASTM D2000 and available in 4 colours, with standard loading capacity of 500 lbs. The
nominal joint width of the profile is 51 mm which contracts down to 38 mm as minimum
and can expand 64 mm as maximum, the movement has been tested with Architectural
testing INC., an Intertek company (Intertek – ATI) as per ASTM E 1399-97 Report no.
84287.01-106-31
2155 Expansion Joint 53.50 As directed by Providing and Fixing of external Roof cover model RJT 200 for 50 mm gap size, As directed by One Running 6242 1008
( New Item ) Engineer in charge Aluminium roof cover comprised of extruded alumunium components, Injection molded Engineer in charge Meter
turnbar, duroflex gaskets and EPDM vapor barrier.This profile is extruded aluminum with
ASTM B 221, Alloy 6063-T5. This profile has been tested under Architectural Testing
Agency ( an Intertek Company) for the movement performance. The minimum opening of
the profile is 3mm ( -47mm) and the maximum openeing of the profile is 92mm (+42mm)
which is more than ±50% movement.
2156 Green Building ( 53.51 As directed by Supplying and providing various materials for REED BED filter media of 1 meter depth As directed by One Cubic Meter 15319 2565
New Item ) Engineer in charge comprising of 300 mm thick brick bats at bottom,60 mm/40 mm gravel 150 mm thick Engineer in charge
over it,20 mm gravel 100 mm thick,Natural sand 100 mm thick,activated charcoal
60/40mm 50 kg 175 mm thick, 50 kg of coco pit in powder form 175 mm thick and 5 nos
aquatic plants at top.The rate is exclusive of cost of tank but inclusive of fixing non
return valve including all materials labour etc.
Page 489
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2157 Precast RCC 53.52 As directed by Providing and fixing in position factory made EPS cement sandwich wall/roof/floor light As directed by One Square 2553 0
Panels Engineer in charge weight solid core pannel made of core material of EPS granule ball/beads (conforming to Engineer in charge Metre
IS 4671:1984 and shall have density not less than 15 kg per cum) adhesive,
cement,sand,flyash and other bonding material in mortar state processed to form in a
preset mould. The outer face on both sides of the panels will be non asbestos fibre cement
board confirming to IS 14862:2000 or Calcium Silicate Board confirming to EN
14306:2009 of 5 mm thick each Panels shall be laid on 6 mm thick cement mortar ( 1
cement : 2 fine sand)mixed with chemical adhesive of 0.5 Kg per 50 Kg of cement or
shall be preferbly fixed into 'C' channel made of 1.2 mm thick MS plate
screwed/fastenered to the salb/coloumn/beam etc. The Panel shall fixed vertically with
tongue and groove joint and horizontally locked with steel bar between each other and
floors and filled with cement mortar and adhesive. Panels should be used as floor and
roofing with additional structure support, steel or RCC depending upon the design. All the
operation shall be completed in all respect as per drawing, manufacturing specification
and under the overall direction of Enginner-in-charge ( Cost oa all the material is included
except 'C' channel which will be paid separtely)
A) Non Load bearing panels 60 mm thick required size
2158 Precast RCC 53.53 As directed by Providing and fixing in position factory made EPS cement sandwich wall/roof/floor light As directed by One Square 2861 0
Panels Engineer in charge weight solid core pannel made of core material of EPS granule ball/beads (conforming to Engineer in charge Metre
IS 4671:1984 and shall have density not less than 15 kg per cum) adhesive,
cement,sand,flyash and other bonding material in mortar state processed to form in a
preset mould. The outer face on both sides of the panels will be non asbestos fibre cement
board confirming to IS 14862:2000 or Calcium Silicate Board confirming to EN
14306:2009 of 5 mm thick each Panels shall be laid on 6 mm thick cement mortar ( 1
cement : 2 fine sand)mixed with chemical adhesive of 0.5 Kg per 50 Kg of cement or
shall be preferbly fixed into 'C' channel made of 1.2 mm thick MS plate
screwed/fastenered to the salb/coloumn/beam etc. The Panel shall fixed vertically with
tongue and groove joint and horizontally locked with steel bar between each other and
floors and filled with cement mortar and adhesive. Panels should be used as floor and
roofing with additional structure support, steel or RCC depending upon the design. All the
operation shall be completed in all respect as per drawing, manufacturing specification
and under the overall direction of Enginner-in-charge ( Cost oa all the material is included
except 'C' channel which will be paid separtely)
B) Non Load bearing panels 75 mm thick required size
Page 490
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2159 Precast RCC 53.54 As directed by Providing and fixing in position factory made EPS cement sandwich wall/roof/floor light As directed by One Square 3314 0
Panels Engineer in charge weight solid core pannel made of core material of EPS granule ball/beads (conforming to Engineer in charge Metre
IS 4671:1984 and shall have density not less than 15 kg per cum) adhesive,
cement,sand,flyash and other bonding material in mortar state processed to form in a
preset mould. The outer face on both sides of the panels will be non asbestos fibre cement
board confirming to IS 14862:2000 or Calcium Silicate Board confirming to EN
14306:2009 of 5 mm thick each Panels shall be laid on 6 mm thick cement mortar ( 1
cement : 2 fine sand)mixed with chemical adhesive of 0.5 Kg per 50 Kg of cement or
shall be preferbly fixed into 'C' channel made of 1.2 mm thick MS plate
screwed/fastenered to the salb/coloumn/beam etc. The Panel shall fixed vertically with
tongue and groove joint and horizontally locked with steel bar between each other and
floors and filled with cement mortar and adhesive. Panels should be used as floor and
roofing with additional structure support, steel or RCC depending upon the design. All the
operation shall be completed in all respect as per drawing, manufacturing specification
and under the overall direction of Enginner-in-charge ( Cost oa all the material is
included except 'C' channel which will be paid separtely)
C) Non Load bearing panels 90 mm thick required size
2160 Precast RCC 53.55 As directed by Providing and fixing in position factory made EPS cement sandwich wall/roof/floor light As directed by One Square 3767 0
Panels Engineer in charge weight solid core pannel made of core material of EPS granule ball/beads (conforming to Engineer in charge Metre
IS 4671:1984 and shall have density not less than 15 kg per cum) adhesive,
cement,sand,flyash and other bonding material in mortar state processed to form in a
preset mould. The outer face on both sides of the panels will be non asbestos fibre cement
board confirming to IS 14862:2000 or Calcium Silicate Board confirming to EN
14306:2009 of 5 mm thick each Panels shall be laid on 6 mm thick cement mortar ( 1
cement : 2 fine sand)mixed with chemical adhesive of 0.5 Kg per 50 Kg of cement or
shall be preferbly fixed into 'C' channel made of 1.2 mm thick MS plate
screwed/fastenered to the salb/coloumn/beam etc. The Panel shall fixed vertically with
tongue and groove joint and horizontally locked with steel bar between each other and
floors and filled with cement mortar and adhesive. Panels should be used as floor and
roofing with additional structure support, steel or RCC depending upon the design. All the
operation shall be completed in all respect as per drawing, manufacturing specification
and under the overall direction of Enginner-in-charge ( Cost oa all the material is included
except 'C' channel which will be paid separtely)
D) Non Load bearing panels 100 mm thick required size
Page 491
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2161 Road Furniture 53.56 MORTH 803.4 Providing and laying of white pre-formed patterned pavement marking tapes, with pre- MORTH 803.4 One Square 7494 27
coated self-adhesive, having abrasion-resistant high refractive index microcrystalline Meter
ceramic beads bonded to a highly durable top coat, having a nominal thickness of 2.0 mm
at pattern heights, meeting the requirements specified in ASTM D4505-12. The patterned
surface shall have approximately 50% ± 15% of the surface area raised and presenting a
near vertical face, angled from 0 degree to 60 degree, to traffic from any direction. All
microcrystalline ceramic beads shall have a minimum index of refraction of 2.3 and 1.8
and ceramic beads shall show resistance to corrosion on exposure to a 1% solution of
sulfuric acid. The applied marking surface to be level, uniform and free from streaks,
cracks and holes. Markings shall have initial average skid resistance value of at least 45
BPN when tested according to ASTM E303 and meet the initial retro reflectance average
values as measured in accordance with the stated testing procedures in the following table:
Test Method (Description of conditions) Typical average initial coefficients of
retroreflected luminance, RL ASTM E1710 (Dry Average)500 mcd/m2/lux
ASTM E2177 (Wet Recovery Average) 250 mcd/m2/lux ASTM E2832 (Wet
Continuous Average) 250 mcd/m2/lux*Observation Angle = 1.05°, Entrance Angle =
88.8°
2162 Road Furniture 53.57 MORTH 803.4 Providing and laying of white contrast pre-formed patterned pavement marking tapes, MORTH 803.4 One Square 9345 27
with pre-coated self-adhesive, having abrasion-resistant high refractive index Meter
microcrystalline ceramic beads bonded to a highly durable top coat, having a nominal
thickness of 2.0 mm at pattern heights, meeting the requirements specified in ASTM
D4505-12. The patterned surface shall have approximately 50% ± 15% of the surface area
raised and presenting a near vertical face, angled from 0 degree to 60 degree, to traffic
from any direction. Contrast markings shall consist of durable, retroreflective white, pliant
polymer materials with durable matte black, non-reflective, pliant polymer borders. All
microcrystalline ceramic beads shall have a minimum index of refraction of 2.3 and 1.8
and ceramic beads shall show resistance to corrosion on exposure to a 1% solution of
sulfuric acid. The applied marking surface to be level, uniform and free from streaks,
cracks and holes. Markings shall have initial average skid resistance value of at least 45
BPN when tested according to ASTM E303 and meet the initial retro reflectance average
values as measured in accordance with the stated testing procedures in the following table:
Test Method (Description of conditions) Typical average initial coefficients of
retroreflected luminance, RL ASTM E1710 (Dry Average) 500 mcd/m2/lux ASTM E2177
(Wet Recovery Average) 250 mcd/m2/lux ASTM E2832 (Wet Continuous Average) 250
mcd/m2/lux *Observation Angle = 1.05°, Entrance Angle = 88.8°
Page 492
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2163 Road Furniture 53.58 MORTH 801 Providing and fixing Mandatory/Regulatory sign boards in circular shape of ______ mm MORTH 801 One Number 5895 351
dia made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall
have 7 years written warranty from the manufacturer and authorised distributor/convertor
issued for field performance including the screen printed areas and cut-out sheeting and
cut-out durable transparent overlay film and this warranty certificate in original should be
submitted to the Engineer in charge by the contractor/supplier.
a. 600 mm dia made out of 3mm aluminum composite material with 0.25 mm skin
thickness on either side
2164 Road Furniture 53.59 MORTH 801 Providing and fixing Mandatory/Regulatory sign boards in circular shape of ______ mm MORTH 801 One Number 7928 351
dia made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall
have 7 years written warranty from the manufacturer and authorised distributor/convertor
issued for field performance including the screen printed areas and cut-out sheeting and
cut-out durable transparent overlay film and this warranty certificate in original should be
submitted to the Engineer in charge by the contractor/supplier.
b. 750 mm dia made out of 4mm aluminum composite material with 0.5 mm skin
thickness on either side
Page 493
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2165 Road Furniture 53.60 MORTH 801 Providing and fixing Mandatory/Regulatory sign boards in circular shape of ______ mm MORTH 801 One Number 10157 351
dia made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall
have 7 years written warranty from the manufacturer and authorised distributor/convertor
issued for field performance including the screen printed areas and cut-out sheeting and
cut-out durable transparent overlay film and this warranty certificate in original should be
submitted to the Engineer in charge by the contractor/supplier.
c. 900 mm dia made out of 4mm aluminum composite material with 0.5 mm skin
thickness on either side
2166 Road Furniture 53.61 MORTH 801 Providing and fixing Mandatory/Regulatory sign boards in circular shape of ______ mm MORTH 801 One Number 15581 351
dia made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall
have 7 years written warranty from the manufacturer and authorised distributor/convertor
issued for field performance including the screen printed areas and cut-out sheeting and
cut-out durable transparent overlay film and this warranty certificate in original should be
submitted to the Engineer in charge by the contractor/supplier.
d.1200 mm dia made out of 4mm aluminum composite material with 0.5 mm skin
thickness on either side
Page 494
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2167 Road Furniture 53.62 MORTH 801 Providing and fixing Mandatory/Regulatory sign boards in circular shape of ___mm dia MORTH 801 One Number 6428 351
made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat
activated adhesive retoreflective specified back ground, border and back side retoreflctive
symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back
support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel
paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white
bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete
block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C (
Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the
manufacturer and authorised distributor/convertor issued for field performance including
the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film
and this warranty certificate in original should be submitted to the Engineer in charge by
the contractor/supplier.
a. 600 mm dia made out of 3mm aluminum composite material with 0.25 mm skin
thickness on either side
2168 Road Furniture 53.63 MORTH 801 Providing and fixing Mandatory/Regulatory sign boards in circular shape of ___mm dia MORTH 801 One Number 8765 351
made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat
activated adhesive retoreflective specified back ground, border and back side retoreflctive
symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back
support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel
paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white
bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete
block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C (
Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the
manufacturer and authorised distributor/convertor issued for field performance including
the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film
and this warranty certificate in original should be submitted to the Engineer in charge by
the contractor/supplier.600 mm dia made out of 3mm aluminum composite material
with 0.25 mm skin thickness on either side
b. 750 mm dia made out of 4mm aluminum composite material with 0.5 mm skin
thickness on either side
Page 495
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2169 Road Furniture 53.64 MORTH 801 Providing and fixing Mandatory/Regulatory sign boards in circular shape of ___mm dia MORTH 801 One Number 12147 351
made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat
activated adhesive retoreflective specified back ground, border and back side retoreflctive
symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back
support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel
paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white
bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete
block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C (
Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the
manufacturer and authorised distributor/convertor issued for field performance including
the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film
and this warranty certificate in original should be submitted to the Engineer in charge by
the contractor/supplier.600 mm dia made out of 3mm aluminum composite material
with 0.25 mm skin thickness on either side
c. 900 mm dia made out of 4mm aluminum composite material with 0.5 mm skin
thickness on either side
Page 496
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2170 Road Furniture 53.65 MORTH 801 Providing and fixing Mandatory/Regulatory sign boards in circular shape of ___mm dia MORTH 801 One Number 17730 351
made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat
activated adhesive retoreflective specified back ground, border and back side retoreflctive
symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back
support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel
paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white
bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete
block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C (
Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the
manufacturer and authorised distributor/convertor issued for field performance including
the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film
and this warranty certificate in original should be submitted to the Engineer in charge by
the contractor/supplier.600 mm dia made out of 3mm aluminum composite material
with 0.25 mm skin thickness on either side
d. 1200 mm dia made out of 4mm aluminum composite material with 0.5 mm skin
thickness on either side
2171 Road Furniture 53.66 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of MORTH 801 One Number 4668 351
____mm made out of ___mm aluminum sheet bonded with white retro reflective sheeting
of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall
have 7 years written warranty from the manufacturer and authorised distributor/convertor
issued for field performance including the screen printed areas and cut-out sheeting and
cut-out durable transparent overlay film and this warranty certificate in original should be
submitted to the Engineer in charge by the contractor/supplier.
600 mm made out of 3mm aluminum composite material with 0.25 mm skin
thickness on either side
Page 497
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2172 Road Furniture 53.67 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of MORTH 801 One Number 5456 351
____mm made out of ___mm aluminum sheet bonded with white retro reflective sheeting
of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall
have 7 years written warranty from the manufacturer and authorised distributor/convertor
issued for field performance including the screen printed areas and cut-out sheeting and
cut-out durable transparent overlay film and this warranty certificate in original should be
submitted to the Engineer in charge by the contractor/supplier.
750 mm made out of 4mm aluminum composite material with 0.5 mm skin
thickness on either side
2173 Road Furniture 53.68 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of MORTH 801 One Number 7017 351
____mm made out of ___mm aluminum sheet bonded with white retro reflective sheeting
of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall
have 7 years written warranty from the manufacturer and authorised distributor/convertor
issued for field performance including the screen printed areas and cut-out sheeting and
cut-out durable transparent overlay film and this warranty certificate in original should be
submitted to the Engineer in charge by the contractor/supplier.
900 mm made out of 4mm aluminum composite material with 0.5 mm skin
thickness on either side
Page 498
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2174 Road Furniture 53.69 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of MORTH 801 One Number 10084 351
____mm made out of ___mm aluminum sheet bonded with white retro reflective sheeting
of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall
have 7 years written warranty from the manufacturer and authorised distributor/convertor
issued for field performance including the screen printed areas and cut-out sheeting and
cut-out durable transparent overlay film and this warranty certificate in original should be
submitted to the Engineer in charge by the contractor/supplier.
1200 mm made out of 4mm aluminum composite material with 0.5 mm skin
thickness on either side+F26
2175 Road Furniture 53.70 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of MORTH 801 One Number 4965 351
_____ mm made out of ____mm aluminum sheet bonded with white retro reflective
sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. ClassC ( Type XI Micro prismatic grade sheeting) shall have 10 years written
warranty from the manufacturer and authorised distributor/convertor issued for field
performance including the screen printed areas and cut-out sheeting and cut-out durable
transparent overlay film and this warranty certificate in original should be submitted to
the Engineer in charge by the contractor/supplier. 600
mm made out of 3mm aluminum composite material with 0.25 mm skin thickness
on either side
Page 499
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2176 Road Furniture 53.71 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of MORTH 801 One Number 5859 351
_____ mm made out of ____mm aluminum sheet bonded with white retro reflective
sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. ClassC ( Type XI Micro prismatic grade sheeting) shall have 10 years written
warranty from the manufacturer and authorised distributor/convertor issued for field
performance including the screen printed areas and cut-out sheeting and cut-out durable
transparent overlay film and this warranty certificate in original should be submitted to
the Engineer in charge by the contractor/supplier.
750 mm made out of 4mm aluminum composite material with 0.5 mm skin
thickness on either side
2177 Road Furniture 53.72 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of MORTH 801 One Number 7684 351
_____ mm made out of ____mm aluminum sheet bonded with white retro reflective
sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. ClassC ( Type XI Micro prismatic grade sheeting) shall have 10 years written
warranty from the manufacturer and authorised distributor/convertor issued for field
performance including the screen printed areas and cut-out sheeting and cut-out durable
transparent overlay film and this warranty certificate in original should be submitted to
the Engineer in charge by the contractor/supplier.
900 mm made out of 4mm aluminum composite material with 0.5 mm skin
thickness on either side
Page 500
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2178 Road Furniture 53.73 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of MORTH 801 One Number 11271 351
_____ mm made out of ____mm aluminum sheet bonded with white retro reflective
sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. ClassC ( Type XI Micro prismatic grade sheeting) shall have 10 years written
warranty from the manufacturer and authorised distributor/convertor issued for field
performance including the screen printed areas and cut-out sheeting and cut-out durable
transparent overlay film and this warranty certificate in original should be submitted to
the Engineer in charge by the contractor/supplier.
1200 mm made out of 4mm aluminum composite material with 0.5 mm skin
thickness on either side
2179 Road Furniture 53.74 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Octagone size of _____mm MORTH 801 One Number 9269 351
made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall
have 7 years written warranty from the manufacturer and authorised distributor/convertor
issued for field performance including the screen printed areas and cut-out sheeting and
cut-out durable transparent overlay film and this warranty certificate in original should be
submitted to the Engineer in charge by the contractor/supplier. 750 mm made out of
4mm aluminum composite material with 0.5 mm skin thickness on either side
Page 501
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2180 Road Furniture 53.75 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Octagone size of _____mm MORTH 801 One Number 12011 351
made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective specified back ground, border and back
side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm
X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in
M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;
complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall
have 7 years written warranty from the manufacturer and authorised distributor/convertor
issued for field performance including the screen printed areas and cut-out sheeting and
cut-out durable transparent overlay film and this warranty certificate in original should be
submitted to the Engineer in charge by the contractor/supplier. 900 mm made out of
4mm aluminum composite material with 0.5 mm skin thickness on either side
2181 Road Furniture 53.76 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Octagone size of ______ mm MORTH 801 One Number 10340 351
made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat
activated adhesive retoreflective specified back ground, border and back side retoreflctive
symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back
support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel
paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white
bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete
block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C (
Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the
manufacturer and authorised distributor/convertor issued for field performance including
the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film
and this warranty certificate in original should be submitted to the Engineer in charge by
the contractor/supplier.
750 mm made out of 4mm aluminum composite material with 0.5 mm skin
thickness on either side
Page 502
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2182 Road Furniture 53.77 MORTH 801 Providing and fixing Cautionary/Warning sign boards in Octagone size of ______ mm MORTH 801 One Number 13551 351
made out of ____mm aluminum sheet bonded with white retro reflective sheeting of
Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat
activated adhesive retoreflective specified back ground, border and back side retoreflctive
symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back
support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel
paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6
mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white
bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete
block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C (
Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the
manufacturer and authorised distributor/convertor issued for field performance including
the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film
and this warranty certificate in original should be submitted to the Engineer in charge by
the contractor/supplier.
900 mm made out of 4mm aluminum composite material with 0.5 mm skin
thickness on either side
Page 503
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2183 Road Furniture 53.78 MORTH 801 Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in MORTH 801 One Square 14187 312
shape having area less than 0.9 One Square Meterr made out of 4 mm aluminum Meter
composite panel with 0.5 mm skin thickness on either side bonded with white retro
reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-
HIP) having pressure sensitive adhesive retoreflective specified back ground, border and
back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3,
supported with back support frame 25mm x 25mm x 3mm, duly painted on back side
with two coats of grey stove enamel paint and supported on one no. mild steel angle iron
post 75 mm x 75 mm x 6 mm, 3.5 mt ~ 3.9 mtlong firmly fixed to the ground by means of
properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm,
60 cm below ground level as per approved drawing The angle iron post shall be duly
painted with one coat of epoxy primer and two coats of epoxy finish paints having
alternate black and white bands of 25 cm width including fixures and transportation
etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing
at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic
grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer
including the Digitally Printed areas with approved printing technology with sheeting
manufacturer approved inks and laminated with UV overlay film and this warranty
certificate along with sheeting manufacturer attested 3 years outdoor weathering test
report from Indian govt lab must be submitted to the Engineer in charge by the
contractor/supplier.
Page 504
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2184 Road Furniture 53.79 MORTH 801 Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in MORTH 801 One Square 16983 312
shape having area less than 0.9 One Square Meter made out of 4 mm aluminum composite Meter
panel with 0.5 mm skin thickness on either side bonded with white retro reflective
sheeting of Class C ( Type XI Type XI Micro prismatic grade sheeting) having pressure
sensitive adhesive retoreflective specified back ground, border and back side retoreflctive
symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back
support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey
stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x
6 mm, 3.5 mt ~ 3.9 mtlong firmly fixed to the ground by means of properly designed
foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground
level as per approved drawing The angle iron post shall be duly painted with one coat of
epoxy primer and two coats of epoxy finish paints having alternate black and white bands
of 25 cm width including fixures and transportation etc.complete.The nut bolts of board
with angle iron post/supporting structure after fixing at site has to be electrically welded.
Class C (Type XI Micro prismatic grade sheeting)) sheeting shall have 10 years written
warranty from the manufacturer including the Digitally Printed areas with approved
printing technology with sheeting manufacturer approved inks and laminated with UV
overlay film and this warranty certificate along with sheeting manufacturer attested 3
years outdoor weathering test report from Indian govt lab must be submitted to the
Engineer in charge by the contractor/supplier.
Page 505
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2185 Road Furniture 53.80 MORTH 801 Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in MORTH 801 One Square 16089 128
shape having area greater than 0.9 One Square Meterr made out of 4 mm aluminum Meter
composite panel with 0.5 mm skin thickness on either side bonded with white retro
reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-
HIP) having pressure sensitive adhesive retoreflective specified back ground, border and
back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3,
supported with back support frame 25mm x 25mm x 3mm, duly painted on back side
with two coats of grey stove enamel paint and supported on two no. mild steel angle iron
post 75 mm x 75 mm x 6 mm, 3.5 mt ~ 3.9 mtlong firmly fixed to the ground by means of
properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm,
60 cm below ground level as per approved drawing The angle iron post shall be duly
painted with one coat of epoxy primer and two coats of epoxy finish paints having
alternate black and white bands of 25 cm width including fixures and transportation
etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing
at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic
grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer
including the Digitally Printed areas with approved printing technology with sheeting
manufacturer approved inks and laminated with UV overlay film and this warranty
certificate along with sheeting manufacturer attested 3 years outdoor weathering test
report from Indian govt lab must be submitted to the Engineer in charge by the
contractor/supplier.
Page 506
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2186 Road Furniture 53.81 MORTH 801 Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in MORTH 801 One Square 18885 380
shape having area greater than 0.9 One Square Meterr made out of 4 mm aluminum Meter
composite panel bonded with 0.5 mm skin thickness on either side with white retro
reflective sheeting of Class C ( Type XI Type XI Micro prismatic grade sheeting) having
pressure sensitive adhesive retoreflective specified back ground, border and back side
retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3,
supported with back support frame 25mm x 25mm x 3mm, duly painted on back side
with two coats of grey stove enamel paint and supported on two no. mild steel angle iron
post 75 mm x 75 mm x 6 mm, 3.5 mt ~ 3.9 mtlong firmly fixed to the ground by means of
properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm,
60 cm below ground level as per approved drawing The angle iron post shall be duly
painted with one coat of epoxy primer and two coats of epoxy finish paints having
alternate black and white bands of 25 cm width including fixures and transportation
etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing
at site has to be electrically welded. ClassC_ ( Type XI Type XI Micro prismatic grade
sheeting) sheeting shall have 10 years written warranty from the manufacturer including
the Digitally Printed areas with approved printing technology with sheeting manufacturer
approved inks and laminated with UV overlay film and this warranty certificate along with
sheeting manufacturer attested 3 years outdoor weathering test report from Indian govt lab
must be submitted to the Engineer in charge by the contractor/supplier.
Page 507
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2187 Road Furniture 53.82 MORTH 801 Providing and erecting Overhead signs made out of 4 mm aluminum composite panel MORTH 801 One Square 11111 171
with 0.5 mm skin thickness on either side bonded with white retro reflective sheeting of Meter
Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure
sensitive adhesive retoreflective specified back ground, border and back side retoreflctive
symbols, letters, numerals, arrow as per IRC:67-2012, with designed back support frame
of mild steel angle with vertical and lateral clearance given in clause 801 and 802, duly
painted on back side with two coats of grey stove enamel paint and installed as per clause
802.6 over a designed support system of structural steel work trestles and trusses of
sections and type as per structural design requirements and approved plans including
painting with one coat of epoxy primer and two coats of epoxy finish paint.The nut bolts
of board with angle iron post/supporting structure after fixing at site has to be electrically
welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting
shall have 7 years written warranty from the manufacturer including the Digitally Printed
areas with approved printing technology with sheeting manufacturer approved inks and
laminated with UV overlay film and this warranty certificate along with sheeting
manufacturer attested 3 years outdoor weathering test report from Indian govt lab must be
submitted to the Engineer in charge by the contractor/supplier.This item does not include
the cost of structural steel work required for support system.
Page 508
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2188 Road Furniture 53.83 MORTH 801 Providing and erecting Overhead signs made out of 4 mm aluminum composite panel MORTH 801 One Square 13013 171
with 0.5 mm skin thickness on either side bonded with white retro reflective sheeting of Meter
Class C (Type XI Micro prismatic grade sheeting) having pressure sensitive adhesive
retoreflective specified back ground, border and back side retoreflctive symbols, letters,
numerals, arrow as per IRC:67-2012, with designed back support frame of mild steel
angle with vertical and lateral clearance given in clause 801 and 802, duly painted on back
side with two coats of grey stove enamel paint and installed as per clause 802.6 over a
designed support system of structural steel work trestles and trusses of sections and type
as per structural design requirements and approved plans including painting with one coat
of epoxy primer and two coats of epoxy finish paint.The nut bolts of board with angle iron
post/supporting structure after fixing at site has to be electrically welded. Class _C_ (
Type XI Type XI Micro prismatic grade sheeting) sheeting shall have 10 years written
warranty from the manufacturer including the Digitally Printed areas with approved
printing technology with sheeting manufacturer approved inks and laminated with UV
overlay film and this warranty certificate along with sheeting manufacturer attested 3
years outdoor weathering test report from Indian govt lab must be submitted to the
Engineer in charge by the contractor/supplier.This item does not include the cost of
structural steel work required for support system.
Page 509
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2189 Road Furniture 53.84 MORTH 801 Providing and fixing board displaying information, such as "Name of work, Tender cost, MORTH 801 One Square 12934 2574
Name of Contractor, Work completion and liability period etc", having rectangular shape Meter
of 1.20m x 0.90m size made up of 4 mm aluminum composite pannel sheet with 0.5 mm
skin thickness on either side bonded with white retro reflective sheeting of Class B (Type
IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive adhesive.
Retro reflective sheeting with specified background, border and back side reto reflective
symbols, letters, numerals, arrow as per IRC: 67-2012 Table No 8.3, on M.S.angle of size
35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm
duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m
long painted with alternate black and white bands of 25 cm width including all fixtures
etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including,
excavation, refilling, transportation, and labour etc complete. Class B (Type IV High
intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the
manufacturer including the Digitally Printed areas with approved printing technology with
sheeting manufacturer approved inks and laminated with UV overlay film and this
warranty certificate in original should be submitted to the Engineer in charge by the
contractor/supplier.
Page 510
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2190 Road Furniture 53.85 MORTH 801 Providing and fixing board displaying information, such as "Name of work, Tender cost, MORTH 801 One Square 14972 2574
Name of Contractor, Work completion and liability period etc", having rectangular shape Meter
of 1.20m x 0.90m size made up of 4 mm aluminum composite pannel sheet with 0.5 mm
skin thickness on either side bonded with white retro reflective sheeting of Class C (Type
XI Micro prismatic grade sheeting) having pressure sensitive adhesive. Retro reflective
sheeting with specified background, border and back side reto reflective symbols, letters,
numerals, arrow as per IRC: 67-2012 Table No 8.3, on M.S.angle of size 35 x 35 x 3 mm
frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted
including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted
with alternate black and white bands of 25 cm width including all fixtures etc.and fixing
the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation,
refilling, transportation, and labour etc complete. Class _C_ (Type XI Micro prismatic
grade sheeting) shall have 10 years written warranty from the manufacturer including the
Digitally Printed areas with approved printing technology with sheeting manufacturer
approved inks and laminated with UV overlay film and this warranty certificate in original
should be submitted to the Engineer in charge by the contractor/supplier.
2191 Road Furniture 53.86 MORTH 801 Providing and fixing board displaying information, such as "Name of work, Tender cost, MORTH 801 One Square 24611 2574
Name of Contractor, Work completion and liability period etc", having rectangular shape Meter
of 1.80m x 1.20m size made up of 4 mm aluminum composite pannel sheet with 0.5 mm
skin thickness on either side bonded with white retro reflective sheeting of Class B (Type
IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive adhesive.
Retro reflective sheeting with specified background, border and back side reto reflective
symbols, letters, numerals, arrow as per IRC: 67-2012 Table No 8.3, on M.S.angle of size
35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm
duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m
long painted with alternate black and white bands of 25 cm width including all fixtures
etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including,
excavation, refilling, transportation, and labour etc complete. Class B (Type IV High
intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the
manufacturer including the Digitally Printed areas with approved printing technology with
sheeting manufacturer approved inks and laminated with UV overlay film and this
warranty certificate in original should be submitted to the Engineer in charge by the
contractor/supplier.
Page 511
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2192 Road Furniture 53.87 MORTH 801 Providing and fixing board displaying information, such as "Name of work, Tender cost, MORTH 801 One Square 28686 2574
Name of Contractor, Work completion and liability period etc", having rectangular shape Meter
of 1.80m x 1.20m size made up of 4 mm aluminum composite pannel sheet with 0.5 mm
skin thickness on either side bonded with white retro reflective sheeting of Class C (Type
XI Micro prismatic grade sheeting) having pressure sensitive adhesive. Retro reflective
sheeting with specified background, border and back side reto reflective symbols, letters,
numerals, arrow as per IRC: 67-2012 Table No 8.3, on M.S.angle of size 35 x 35 x 3 mm
frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted
including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted
with alternate black and white bands of 25 cm width including all fixtures etc.and fixing
the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation,
refilling, transportation, and labour etc complete. Class _C_ (Type XI Micro prismatic
grade sheeting)) shall have 10 years written warranty from the manufacturer including the
Digitally Printed areas with approved printing technology with sheeting manufacturer
approved inks and laminated with UV overlay film and this warranty certificate in original
should be submitted to the Engineer in charge by the contractor/supplier.
Page 512
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2194 a As directed by 20mm diameter of Soil Nail As directed by one running 3705 88
Engineer in charge Engineer in charge metre
2195 b As directed by 25mm diameter of Soil Nail As directed by one running 3855 88
Engineer in charge Engineer in charge metre
Page 513
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2196 c As directed by 28mm diameter of Soil Nail As directed by one running 3915 88
Engineer in charge Engineer in charge metre
2197 d As directed by 32mm diameter of Soil Nail As directed by one running 4310 88
Engineer in charge Engineer in charge metre
2198 e As directed by 35mm diameter of Soil Nail As directed by one running 4815 88
Engineer in charge Engineer in charge metre
2199 54.03 As directed by Reinforced Earth Wall :- Supplying and laying of 50mm to 90mm wide high tensile As directed by one running 112 5
Engineer in charge polymeric GeoStrap consisting of discrete channels of closely packed high tenacity Engineer in charge metre
polyester tendons encased in a Linear Low-Density Polyethylene sheath (LLDPE) and
having minimum 25KN up to 100KN and a maximum 12 pecent elongation at break.
Confirming to IRC SP 102 and MoRTH 3100 etc complete. As Directed by Engineer in
Charge.
2200 54.04 As directed by Reinforced Soil Abutments:- Supplying and laying of high adherence and high adherence As directed by one running 281 5
Engineer in charge reinforced galvanized steel strips with transverse ribs, having minimum tensile strength of Engineer in charge metre
490N/mm2 and yield strength of 355N/mm2 and minimum galvanization of 1000 grams
per sqm as per BSEN 10025 Grade 355JR, as per BBA certified system for construction
of Reinforced Earth walls and Pure Abutments and Confirming to IS 4759 (For
Galvanisation), IRC SP 102 (For Design), BSEN 10025 (For Grade of Steel) etc complete.
As Directed by Engineer in Charge.
Page 514
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2201 Road Furniture 54.05 As directed by Providing and fixing kerbstone with led lighting system as per following specifications: As directed by one running 7411 62
Engineer in charge dimensions with vertical mounting legs with 10mm horizontal square shape mild steel Engineer in charge metre
reinforcements. Illuminated kerb stone having visible dimensions :-500mm x 150mm x
150mm.(as per irc - 86-1983 ) 80mm legs having ms reinforcements shal be embedded in
bt/concrete road surface.the kerb stone should have kerb angle of 45 degree, with rubber
plugs at both ends of the kerbstones (2 nos)having load carrying capacity - vertical :
1465kg, horizontal : 2349 (certified by govt. Recoganized bodies)having thermal stability -
: -40 to +120 degree celcius (certified by govt. Recoganized bodies. Illuminated kerb
stones including : ingrace protection and connector rating ip67, electrical wire -(as per is:
694), led strip (as per lm:80) standard. Including for electrical fixing -frp junction box
consisting of - 10amp. Switch module power supply(smps)having input voltage - 230v ac,
output voltage 36v dc, 2 pole mcb. Illuminated kerb stones having warranty for 3 years.
illuminated kerbstone shall be fixed into cast-in-situ cement concrete of m20 grade at
base, back filling and grooves, including dismantling, fixing, removal of dismantled
material and cleaning etc. Complete. The colour of kerb stone shall be provided as
directed by engineer in charge.
2202 New Item 54.06 As directed by Provinding and errecting 1.80m high Fix knot fencing Bezinal 2000 Type fencing having As directed by one running 757 68
Engineer in charge 16 Rows of 2.40 mm Bezinal 2000 wire on M.S. angle 50x50x5 mm embedded in c c Engineer in charge metre
block of 1:4:8 of size 450x450x910 mm at end and block of 450x450x760 mm at
intermediate, 4.80m specing of pole with "S" clip high Tensile Bezinal 2000 including
pulling high tensile wire with 5 Tone capacity puller including finishing and scoat of oil
painting to M.S. angle etc. complete.
2203 New Item 54.07 As directed by Provinding and errecting 1.20m high Fix knot fencing Bezinal 2000 Type fencing having As directed by one running 7411 63
Engineer in charge 11 Rows of 2.40 mm Bezinal 2000 wire on M.S. angle 50x50x5 mm embedded in c c Engineer in charge metre
block of 1:4:8 of size 450x450x910 mm at end and block of 450x450x760 mm at
intermediate, 4.80m specing of pole with "S" clip high Tensile Bezinal 2000 including
pulling high tensile wire with 5 Tone capacity puller including finishing and scoat of oil
painting to M.S. angle etc. complete
Page 515
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Doors and 54.08 Providing and fixing of factory made uPVC Sliding window & door (White Colour)
Windows complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on
top and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I.
section 1.5 mm, wherever required. uPVC window & door profile shall be made in India
& shall conform to BS EN 12608 and other standards as mentioned below: S.No.
Name of the test Test Method Specified Parameter
1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat
Softening Temperature EN ISO – 306 Shall not be < 750C
3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2
4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2
5 Mean Breaking Stress for welded corner
(a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2
(b) For the compression bending test Shall not be < 30N/mm2
6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %
7 Surface Spread of flame BS : 476 - Part 7 Classification 1
8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable
9 Tensile modulus ASTM D 638 Shall not be < 35 MPa
10 Shear Modulus ASTM D 732 Shall not be < 220 MPa
11 Tensile Strength EN ISO 527 Shall not be < 30 MPa
All corners of frame and sash will be fusion welded. After placing 5 mm Float Annealed
glass in the sash, uPVC glazing bead, interlock, EPDM / TPE gasket, brush shall be
provided including touch lock and rollers & proper drainage system shall be provided.
Window / Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and
complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door
Profiles are warranted for a period of ten (10) years against non-uniform discoloration,
wrapping and rotting under general use.
2204 a As directed by 2 Track 2 / 4 Sash (Big Series) window frame of size 67 x 54 mm & Sash of size 64 x 47 As directed by Square Meter 7320 0
Engineer in charge mm Engineer in charge
2205 b As directed by 3 Track 3 / 6 Sash (Big Series) window frame of size 122 x 54 mm & Sash of size 64 x As directed by Square Meter 8526 0
Engineer in charge 47 mm Engineer in charge
2206 c As directed by 3 Track with Mesh-2 Glass Sash + 1 Mesh Sash (Each sash shall be half of width of As directed by Square Meter 9760 0
Engineer in charge window) (Big Series) Window frame of size 122 x 54 mm & Sash of size 64 x 47 mm. Engineer in charge
2207 d As directed by 2 Track 2 / 4 Sash (Big Series) door frame of size 67 x 54 mm & Sash of size 85 x 47 As directed by Square Meter 6558 0
Engineer in charge mm. Engineer in charge
2208 e As directed by 3 Track 3 / 6 Sash (Big Series) door frame of size 122 x 54 mm & Sash of size 85 x 47 As directed by Square Meter 6267 0
Engineer in charge mm. Engineer in charge
Page 516
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2209 f As directed by f) 3 Track with Mesh-2 Glass Sash + 1 Mesh Sash (Each sash shall be half of width of As directed by Square Meter 8273 0
Engineer in charge door) (Big Series) Door frame of size 122 x 54 mm & Door Sash ofsize 85 x 47mm & Engineer in charge
Mesh sash of size 85 x 47 mm.
Doors and 54.09 Providing and fixing of factory made uPVC casement window / Fixed Window &
Windows Casement Door (White Colour) comprising uPVC multi-chambered frame, Sash, &
Mullion with wall thickness of 2.3mm (+-0.2 mm ), duly reinforced with G.I. section 1.5
mm, wherever required. uPVC window & door profile shall be made in India & shall
conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the
test Test Method Specified Parameter
1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat
Softening Temperature EN ISO – 306 Shall not be < 750C
3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2
4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2
5 Mean Breaking Stress for welded corner
(a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2
(b) For the compression bending test Shall not be < 30N/mm2
6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %
7 Surface Spread of flame BS : 476 - Part 7 Classification 1
8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable
9 Tensile modulus ASTM D 638 Shall not be < 35 MPa
10 Shear Modulus ASTM D 732 Shall not be < 220 MPa
11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash
will be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall be
provided in all frame, sash & mullion, wherever necessary.Thereafter, 5 mm Float
Annealed glass shall be provided in the sash with the help of uPVC glazing bead and
hardware, i.e., friction hinge & single point handle (in window) & 3D Hinges &
Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wall
with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of
Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten
(10) years against non-uniform discoloration, wrapping and rotting under general use.
2210 a As directed by Casement Window (Big Series) frame of size 67 x 62 mm & Sash / Mullion of size 67 x As directed by Square Meter 10495 0
Engineer in charge 78 mm. Engineer in charge
2211 b As directed by Casement Door (Big Series) frame of size 67 x 62 mm & Door Sash of size 67 x 115 mm As directed by Square Meter 9581 0
Engineer in charge & Mullion (if required) of size 67 x 78 mm. Engineer in charge
2212 c As directed by Fixed Window (Big Series) frame of size 67 x 62 mm & Mullion (if required) of size 67 x As directed by Square Meter 8342 0
Engineer in charge 78 mm. Engineer in charge
Page 517
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
Doors and 54.10 Providing and fixing factory made uPVC twin sash casement glazed window and door
Windows (White Colour) comprising of two shutters, one outward opening having glass and one
inward opening having SS Mesh and integrated grill provision between two shutters.
uPVC multi-chambered frame, sash, bugmesh sash and mullion (where ever required)
extruded profiles with wall thickness of 2.3mm (+-0.2 mm) duly reinforced with G.I
section 1.50 wherever required. uPVC window & door profile shall be made in India &
shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of
the test Test Method Specified Parameter
1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat
Softening Temperature EN ISO – 306 Shall not be < 750C
3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2
4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2
5 Mean Breaking Stress for welded corner
(a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2
(b) For the compression bending test Shall not be < 30N/mm2
6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %
7 Surface Spread of flame BS : 476 - Part 7 Classification 1
8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable
9 Tensile modulus ASTM D 638 Shall not be < 35 MPa
10 Shear Modulus ASTM D 732 Shall not be < 220 MPa
11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash
will be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall be
provided in all frame, sash & mullion, wherever necessary.Thereafter, 5 mm Float
Annealed glass shall be provided in the sash with the help of uPVC glazing bead and
hardware, i.e., friction hinge & single point handle (in window) & 3D Hinges &
Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wall
with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of
Engineer-In-Charge.
uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-
uniform discoloration, wrapping and rotting under general use.
2213 a As directed by Twin Sash Casement Window frame of size 122 x 62 mm, sash 67 x 78 mm & bug-mesh As directed by Square Meter 18783 0
Engineer in charge sash of 42 x 84 mm. Engineer in charge
2214 b As directed by Twin Sash Casement Door frame of size 122 x 62 mm, door sash 67 x 115 mm & bug- As directed by Square Meter 13744 0
Engineer in charge mesh sash of 42 x 84 mm. Engineer in charge
Page 518
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2215 Doors and 54.11 As directed by Providing and fixing of factory made uPVC Louver window (White Colour) comprising As directed by Square Meter 9232 0
Windows Engineer in charge of uPVC multi-chambered with wall thickness of 2.3mm (+-0.2 mm ), duly reinforced Engineer in charge
with 1.5 mm thick G. I. Section. uPVC window & door profile shall be made in India &
shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of
the test Test Method Specifie Parameter
1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat
Softening Temperature EN ISO – 306 Shall not be < 750C
3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2
4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2
5 Mean Breaking Stress for welded corner
(a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2
(b) For the compression bending test Shall not be < 30N/mm2
6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %
7 Surface Spread of flame BS : 476 - Part 7 Classification 1
8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable
9 Tensile modulus ASTM D 638 Shall not be < 35 MPa
10 Shear Modulus ASTM D 732 Shall not be < 220 MPa
11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame shall be
fusion welded. Both vertical sides of the frame, adjustable louver mechanism having one
lever or fixed louver bracket shall be fitted with the of 4 mm Frosted Annealed glass.
Window will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete
in all respect as per direction of Engineer-In-Charge.
uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-
uniform discoloration,wrapping and rotting under general use.
a.Louver Window (Big Series) frame of size 67 x 62 mm & Mullion (if required) of size
67 x 78 mm.
2216 Doors and 54.12 As directed by Providing and Fixing factory made PVC door frame made of PVC extruded sections of As directed by Square Meter 555 0
Windows Engineer in charge size 77 mm x 58 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the Engineer in charge
frame reinforced with PVC profile of cross section size 29 mm x 31 mm x 2 mm thickness
(± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame
with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut,
jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long
stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of
anchor dash fastener, all complete as per manufacturer's specification and direction of
engineerin-charge.
Page 519
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2217 Doors and 54.13 As directed by Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made As directed by Square Meter 3801 0
Windows Engineer in charge of PVC hollow extruded printed and laminated section having overall dimension 115 mm Engineer in charge
x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles
and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of
size 75 mm x 200 mm long with cross section size of 29 mm x 31 mm having wall
thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together.
Only hinge side vertical style to be reinforced with PVC profile reinforcement in full
length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall
thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after
inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit
beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright
steel rod horizontally with both side threaded and tightened with check nuts and washers
complete, all as per manufacturer's specification and direction of engineer-in-charge.
2218 New Item 54.15 As directed by Finishing upto 225 mm thick cement concrete laid to proper level and slope including As directed by One Square 126 95
Engineer in compacting finishing with tremix treatment for paving slab with compaction by screed Engineer in Metre
charge vibrator , removing excess water from the cement concrete by tremix vaccum dewatering charge
system , finishing the surface with floater and trowel including all etc. complete as directed
2219 New Item 54.16 As directed by Procurement, Supply, Fabrication, Erection, Installation of required height Sign Board to As directed by One Number 15222 3111
Engineer in have a clear and legible visibility, made with 100mm x 50mmx 5mm thick 'C' Channel Engineer in
charge Section, cross bracing in Angle section of size 35mm x 35mm x 5mm (wherever required) charge
and EPS panels of thickness 75mm. The base will be grouted with a M20 grade Plain
Cement concrete foundation of size 600mm x 600mm x 750mm etc (Complete of final
size of visible area 10 ft height X ( 4ft horizontal X 4ft Vertical EPS Panel)
2220 New Item 54.17 As directed by Procurement, Supply, Fabrication, Erection, Installation of required height Sign Board to As directed by One Number 14152 3051
Engineer in have a clear and legible visibility, made with 100mm x 50mmx 5mm thick 'C' Channel Engineer in
charge Section, cross bracing in Angle section of size 35mm x 35mm x 5mm (wherever required) charge
and EPS panels of thickness 75mm. The base will be grouted with a M20 grade Plain
Cement concrete foundation of size 600mm x 600mm x 750 mm etc (Complete of final
size of visible area 10 ft height X ( 3ft horizontal X 4ft Vertical EPS Panel)
Page 520
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2221 New Item 54.18 As directed by Procurement, Supply, Fabrication, Erection, Installation of required height Sign Board to As directed by One Number 16103 3122
Engineer in have a clear and legible visibility, made with 100mm x 50mmx 5mm thick 'C' Channel Engineer in
charge Section, cross bracing in Angle section of size 35mm x 35mm x 5mm (wherever required) charge
and EPS panels of thickness 75mm. The base will be grouted with a M20 grade Plain
Cement concrete foundation of size 600mm x 600mm x 750mm etc (Complete.Of final
size of visible area 10 ft height X ( 5ft horizontal X 4ft Vertical EPS Panel)
2222 New Item 54.19 As directed by Procurement, Supply, Fabrication, Erection, Installation of required height Sign Board to As directed by One Number 13972 2796
Engineer in have a clear and legible visibility, made with 100mm x 50mmx 5mm thick 'C' Channel Engineer in
charge Section, cross bracing in Angle section of size 35mm x 35mm x 5mm (wherever required) charge
and EPS panels of thickness 75mm. The base will be grouted with a M20 grade Plain
Cement concrete foundation of size 600mm x 600mm x 750mm etc (Complete of final
size of visible area 08 ft height X ( 4ft horizontal X 4ft Vertical EPS Panel)
2223 New Item 54.20 As directed by Procurement, Supply, Fabrication, Erection, Installation (upto 20kms lead within city As directed by One Number 12903 2736
Engineer in limits) of required height Sign Board to have a clear and legible visibility, made with Engineer in
charge 100mm x 50mmx 5mm thick Channel Section, cross bracing in Angle section of size charge
35mm x 35mm x 5mm (wherever required) and EPS panels of thickness 75mm. The base
will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x
600mm x 750mm etc (Complete of final size of visible area 08 ft height X ( 3ft horizontal
X 4ft Vertical EPS Panel)
2224 New Item 54.21 As directed by Procurement, Supply, Fabrication, Erection, Installation (upto 20kms lead within city As directed by One Number 14854 2807
Engineer in limits) of required height Sign Board to have a clear and legible visibility, made with Engineer in
charge 100mm x 50mmx 5mm thick Channel Section, cross bracing in Angle section of size charge
35mm x 35mm x 5mm (wherever required) and EPS panels of thickness 75mm. The base
will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x
600mm x 750mm etc (Complete of final size of visible area 08 ft Vertical X( 5ft
horizontal X 4ft vertical) EPS panel
2225 New Item 54.22 As directed by Procurement, Supply, Fabrication, Erection, Installation (upto 20kms lead within city As directed by One Number 12746 2481
Engineer in limits) of required height Sign Board to have a clear and legible visibility, made with Engineer in
charge 100mm x 50mmx 5mm thick Channel Section, cross bracing in Angle section of size charge
35mm x 35mm x 5mm (wherever required) and EPS panels of thickness 75mm. The base
will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x
600mm x 750mm etc (Complete of final size of visible area 06 ft Vertical X (4ft
Horizonal X 4 Vertical)
Page 521
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2226 New Item 54.23 As directed by Procurement, Supply, Fabrication, Erection, Installation (upto 20kms lead within city As directed by One Number 11677 2421
Engineer in limits) of required height Sign Board to have a clear and legible visibility, made with Engineer in
charge 100mm x 50mmx 5mm thick Channel Section, cross bracing in Angle section of size charge
35mm x 35mm x 5mm (wherever required) and EPS panels of thickness 75mm. The base
will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x
600mm x 750mm etc (Complete of final size of visible area 06 ft height X ( 3ft horizontal
X 4ft Vertical EPS Panel)
2227 New Item 54.24 As directed by Procurement, Supply, Fabrication, Erection, Installation (upto 20kms lead within city As directed by One Number 13628 2492
Engineer in limits) of required height Sign Board to have a clear and legible visibility, made with Engineer in
charge 100mm x 50mmx 5mm thick Channel Section, cross bracing in Angle section of size charge
35mm x 35mm x 5mm (wherever required) and EPS panels of thickness 75mm. The base
will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x
600mm x 750mm etc (Complete of final size of visible area 08 ft Vertical X( 5ft
horizontal X 4ft vertical) EPS panel
2228 New Item 54.25 As directed by Procurement, Supply, Installation of required height Sign Board to have a clear and legible As directed by One Number 11731 824
Engineer in visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 10ft height and Engineer in
charge EPS panel of thickness 75mm having size 4 ft Horizontal X 4 ft. vertical. The base will charge
be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm
x 750mm etc
2229 New Item 54.26 As directed by Procurement, Supply, Installation of required height Sign Board to have a clear and legible As directed by One Number 10891 824
Engineer in visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 10ft height and Engineer in
charge EPS panel of thickness 75mm having size 3 ft Horizontal X 4 ft. vertical. The base will charge
be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm
x 750mm etc
2230 New Item 54.27 As directed by Procurement, Supply, Installation of required height Sign Board to have a clear and legible As directed by One Number 12572 824
Engineer in visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 10ft height and Engineer in
charge EPS panel of thickness 75mm having size 5 ft Horizontal X 4 ft. vertical. The base will charge
be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm
x 750mm etc
2231 New Item 54.28 As directed by Procurement, Supply, Installation of required height Sign Board to have a clear and legible As directed by One Number 10892 824
Engineer in visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 10ft height and Engineer in
charge EPS panel of thickness 75mm having size 5 ft Horizontal X 4 ft. vertical. The base will charge
be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm
x 750mm etc
Page 522
Sr. Chapter SSR Item Reference No. Description of the item Additional Unit Completed Labour
No. No. Specification Rate for Rate for
2022-23 2022-23
excluding excluding
GST GST
In Rs. In Rs.
2232 New Item 54.29 As directed by Procurement, Supply, Installation of required height Sign Board to have a clear and legible As directed by One Number 10052 824
Engineer in visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 8ft height and EPS Engineer in
charge panel of thickness 75mm having size 3 ft Horizontal X 4 ft. vertical. The base will be charge
grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x
750mm etc
2233 New Item 54.30 As directed by Procurement, Supply, Installation of required height Sign Board to have a clear and legible As directed by One Number 11732 824
Engineer in visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 8ft height and EPS Engineer in
charge panel of thickness 75mm having size5 ft Horizontal X 4 ft. vertical. The base will be charge
grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x
750mm etc
2234 New Item 54.31 As directed by Procurement, Supply, Installation of required height Sign Board to have a clear and legible As directed by One Number 10052 824
Engineer in visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 6ft height and EPS Engineer in
charge panel of thickness 75mm having size 4 ft Horizontal X 4 ft. vertical. The base will be charge
grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x
750mm etc
2235 New Item 54.32 As directed by Procurement, Supply, Installation of required height Sign Board to have a clear and legible As directed by One Number 9212 824
Engineer in visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 6ft height and EPS Engineer in
charge panel of thickness 75mm having size 3 ft Horizontal X 4 ft. vertical. The base will be charge
grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x
750mm etc
2236 New Item 54.33 As directed by Procurement, Supply, Installation of required height Sign Board to have a clear and legible As directed by One Number 10892 824
Engineer in visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 6ft height and EPS Engineer in
charge panel of thickness 75mm having size 5 ft Horizontal X 4 ft. vertical. The base will be charge
grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x
750mm etc
Page 523
MATERIAL RATES FOR SSR FOR YEAR 2022-2023
Page 524
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
Building (Bd-J : Water Proofing)
1 Bitumen (Compound) Kg. 68.00
2 Brick bats Cu.Mt. 875.00
3 Water proof compound I.S Kg. 179.00
4 Tar Felt B.H.I.S.I.3mm thick Sq.Mt. 102.00
5 Acrylic Polymer Modified waterproofing Powder Kg. 175.00
6 Acrylic Polymer Modified Liquid Ltr. 238.00
7 Fibre Glass Mesh Sq.Mt. 77.00
8 Bitumen 85/25 Grade Kg. 69.00
9 Bitumen 85/25 Grade Cold Primer Kg. 55.00
10 Grit (Add Below 5.6) Cmt 817.00
11 Bitumen Felt Sqm 100.00
Page 525
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
23 Heavy duty interlocking concrete block 80mm thick gray Sq.Mt.
684.00
300kg/sq.cm
24 Heavy duty interlocking concrete block 80mm thick coloured Sq.Mt.
789.00
300kg/sq.cm
25 Heavy duty interlocking concrete block 80mm thick rubber mould Sq.Mt.
972.00
glossy 400kg/sq.cm
26 Heavy duty interlocking concrete block 40mm thick colour 200 Sq.Mt.
536.00
kg/sq.cm
27 Telephone Black Granite Sq.Mt. 2656.00
28 Green marble Sq.Mt. 1303.00
29 Vitrified tiles Glossy Size 590 to 605 mm* 590 to 605 mm*8 to Sq.Mt.
608.00
10mm
30 Vitrified matt finish - size 590 to 605 mm* 590 to 605 mm *8 to Sq.Mt.
938.00
10mm
31 Vitrified rustic matt stone finish size 590 to 605mm *590 to Sq.Mt.
1005.00
605mm*8 to 10mm
32 Vertified stone effect finish size 590 to 605mm* 590 to 605mm * 8 Sq.Mt.
1040.00
to 10mm
33 Calcet Powder Kg. 511.00
34 Black Oxide powder Kg. 144.00
35 Fevi Matt Chemical 10 Kg Bag bags 788.00
36 Marble chips Kg. 56.00
37 Heavy duty interlocking concrete block 60mm thick rubber mould Sq.Mt.
734.00
glossy 400kg/sq.cm
38 Tremix Treatment 100 mm thick Sq.Mt. 92.00
39 Marble mosaic chequered tiles (gray) Sq.Mt. 294.00
40 Colour cement Kg. 24.00
41 Heavy Duty Designer come. tile for flooring Sq.Mt. 944.00
42 Heavy Duty Designer come. tile for Steps Sq.Mt. 1015.00
43 PVC flooring Sq.Mt. 389.00
44 Ceramic Tiles for dado 30 x 60 cm Sq.Mt. 611.00
45 Marble (other than white makrana) Sq.Mt. 1399.00
46 Kota stone (Hand cut) upto 45-55mm thick one side polished Sq.Mt. 610.00
47 Vitrified matt finish - size 895 to 900 mm* 895 to 900 mm *10 to Sq.Mt.
1100.00
12 mm
48 Italian marble 18mm thik Sq.Mt. 4000.00
49 Kalinga stone tile Sq.Mt. 8000.00
50 Vitrified Tile 1200x1800 ,10mm thick Sq.Mt. 1800.00
51 Vitrified Tile 600x1200 ,8mm thick Sq.Mt. 1500.00
52 Vitrified Tile 800x1600 ,8mm thick Sq.Mt. 130.00
53 Parking Tile 600x600 ,12mm thick Sq.Mt. 830.00
54 Parking Tile 600x600 ,16mm thick Sq.Mt. 1280.00
55 Full Body Vitrified Tile 800x2400 ,8mm thick Sq.Mt. 3000.00
56 Epoxy for joint sealing of tiles Kg 1200.00
57 Brass spacer bar Rft 210.00
Page 526
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
11 Linseed oil double boiled Ltr. 143.00
12 Terpentine Ltr. 106.00
13 Wood Primer Ltr. 168.00
14 Brush for lettring No. 44.00
15 Brush for road marking 5cm No. 110.00
16 Brush for marking road 8cm No. 206.00
17 Brush for road marking 10cm No. 233.00
18 Lustre paint Ltr. 266.00
19 Textured Synthetic paint Ltr. 272.00
20 White lead paint Kg. 320.00
21 Birla wall care putty Kg. 55.00
22 Aluminium Paint Lit. 359.00
23 Plastic emulsion paint Ltr. 345.00
24 Acraylic Emulsion Paint Ltr. 223.00
25 Exterior Primer Ltr. 151.00
26 Weather shield paint Ltr. 339.00
Page 527
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
26 19mm plywood 710 bwp full red core with test report Sq.mt. 1200.00
27 12mm plywood 710 bwp full red core with test report Sq.mt. 950.00
28 9mm plywood 710 bwp with test report Sq.mt. 850.00
29 19mm plywood 303 bwr full red core with test report Sq.mt. 1050.00
30 12mm plywood 303 bwr full red core with test report Sq.mt. 750.00
31 9mm plywood 303 bwr with test report Sq.mt. 650.00
32 1mm white laminate liner Sq.mt. 600.00
33 Fevicol marine kg 280.00
34 19mm black board full pine bwp with test report Sq.mt. 1400.00
35 Heavy Zinc Telescopic channels Per inch 25.00
36 Heavy Duty Floor spring No. 6000.00
37 0.9 m high SS door handle No. 120.00
38 Brass L Hinge 5.20% 124.80 Kg/M3
39 BRASS Tower bolt 10mm dia 300mm length No. 350.00
40 Rose mortise lock with long body door set No. 3800.00
41 SS Body door's Stopper's No. 300.00
42 Digital key drawer lock No. 500.00
43 SS auto soft closer hinge No. 350.00
44 Zinc concealed door closer No. 6500.00
45 SS door handle 20mm thick 300mm long No. 1800.00
46 Cnc cutting ms jail 4mm thick with powder coating Sq.mt. 6000.00
47 Wpc 18mm 0.5 density Sq.mt. 2600.00
48 Bison board 18mm Sq.mt. 2000.00
49 12mm bison board Sq.mt. 1100.00
50 Metal keyboard drawer No. 2700.00
51 25*10 mm Beading brama teak Rft 15.00
52 35*10mm beading brama teak Rft 40.00
53 50*15mm beading brama teak Rft 70.00
54 Charcoal 4mm Sq.mt. 5000.00
55 4’’ foam sheet 50 density Sq.mt. 2200.00
56 2’’ foam sheet 50 density Sq.mt. 1400.00
57 1’’ foam sheet 50 density Sq.mt. 900.00
58 Sofa clothe leather finish Per meter 1050.00
59 Sofa leg 4’’ No. 250.00
60 Window Roller fabric blinds Sq.mt. 3000.00
61 SS Hinges 125mm Ht, 14 Gauge Heavy Duty No. 280.00
62 Veneer melamiane Polishing Sq.mt. 1900.00
63 PU polishing Teak Wood Sq.mt. 3000.00
64 Cement Sheet 4 mm Sq.mt. 300.00
65 Cement Sheet 8 mm Sq.mt. 500.00
66 Cement Sheet 12 mm Sq.mt. 700.00
Page 528
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
15 G.I. Pre coated trapezoidal 0.50 mm thick roof Metalic Coloured Sq.Mt.
958.00
Sheet
16 G.I. Pre coated Ridge Sheet R.Mt. 715.00
17 Gypsum powder Kg. 27.00
18 Aluminium Alloy plate 2mm thick Sq.Mt. 1716.00
19 Aluminium sheeting fixed with encapsuled lens type reflective Kg.
sheeting including 2% towards lettering , cost of angle iron, cost of 184.00
drilling holes , nuts, bolts etc. and signs as applicable.
20 Plaster Of Paris bags 264.00
21 Decorative Board of Fibrous Plaster of Paris 12 to 15 mm Sq.Mt. 427.00
22 Acoustic Board 12 mm thick Sq.Mt. 299.00
23 Gypsum Board 12.5 mm thick Sq.Mt. 238.00
24 UPVC 3 layer trapezoidal 2.00 mm sheet Sq.Mt. 952.00
25 Light weight calcium silicate tile of size 595 x 595 mm of texture Sq.Mt.
825.00
spin stone / cosmos / plain / Glode fine fissured.
26 Bioguard Board 16 mm Sq.Mt. 1178.00
27 Ultima tile Sq.Mt. 1454.00
28 Optra tile Sq.Mt. 1849.00
29 Proflex Sheet 1 mm Kg. 100.00
30 Sky light 2 mm thick Kg. 1485.00
31 Hanger rod 4mm thick No. 15.00
32 level Adjustment clip size 85x30x0.8mm No. 15.00
33 Dash fastener 12.5mm dia 50mm long No. 63.00
34 Soffit cleat 25mmx35mmx1.60mm No. 8.00
35 Wooden Screws with plastic rawl plugs 35mmx8mm No. 108.00
36 Light weight calcium silicate tiles of size 595x595mm of texture No.
1342.00
Spintone for Tegular edge ceiling
37 Plain Zinc Sheet Sq.Mt. 270.00
38 UPVC ridge/hip tiles No. 418.00
39 Hanger wire (2.68 mm dia), 1.82 m long No. 27.00
40 Dune edge tiles Sq.Mt. 1034.00
41 Fine fissured edge tiles Sq.Mt. 809.00
42 Turbo ventilator 24" No. 9702.00
43 Tarat 36" width ( Gunny Cloth) R.Mt. 75.00
44 Wire glass Sq.Mt. 713.00
45 Fire wood Quintal 395.00
46 Precoated Galvanised Steel Plain Sheet Smt 1143.00
47 Connecting clip for supports No. 11.00
48 Dry wall screws 25 mm No. 6.00
49 Jointing Compound Kg. 57.00
50 Jointing Tape Rmt. 8.00
51 Minaral Fibre board 600 x 600 mm Sq.Mt. 1062.00
52 Perimeter Channel 80 x 8 mm Kg. 217.00
53 Screws 1 12" No. 2.00
54 Screws 1/2" No. 2.00
55 Rawal Plug No. 3.00
55 Plain Zinc Sheet 0.50 mm thick Sq.mt. 712.00
Page 529
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
8 But Hinges Alluminium 125mm No. 93.00
9 G.I.Screw 50mm Doz. 34.00
10 G.I.Screw 25mm Doz. 19.00
11 Stainless Steel Hinges - 125mm 14 gauge (Heavy Duty) No. 87.00
12 Tower bolt Aluminium 10mm dia.length 250mm No. 100.00
13 Tower bolt Aluminium 10mm dia.length 200mm No. 84.00
14 Tower bolt M.S. Chromium plated 10mm dia,length 300mm No. 94.00
15 Tower bolt M.S. Chromium plated 10mm dia,length 200mm No. 89.00
16 Cold Rolled Steel Hollow Section Door frame 1829*610mm No. 2188.00
18 Aluminium stay 25cm No. 90.00
19 Aluminium stay 30cm No. 101.00
20 Jali fly proof Sq.Mt. 284.00
21 Jali chicken mesh Sq.Mt. 95.00
22 Jali welded mesh 25*25* 13 Guage Sq.Mt. 212.00
23 Jali welded mesh 25*25* 11 Guage Sq.Mt. 356.00
24 Jali welded mesh 50*25 13 Guage Sq.Mt. 231.00
25 Jali welded mesh 50*25 11 Guage Sq.Mt. 407.00
26 Hold fast Iron 300*40*5mm No. 83.00
27 Sliding Door Bolt Stainless Steel 12mm dia. 250mm length No. 139.00
28 Glass plain 3mm Sq.Mt. 428.00
29 Glass plain 5mm Sq.Mt. 618.00
30 Glass obscured (bajara) 5mm Sq.Mt. 650.00
31 G.I. Nut Bolt Kg. 134.00
32 Housing box to rolling shutter Sq.Mt. 1650.00
33 Mechanical Gear For Rolling Shutter No. 2637.00
34 Mortice lock superior No. 920.00
35 Solid Core commercial shutter 30mm thick phenol bonded with face Sq.Mt.
1050.00
veneer 3 mm thick both side
36 Iron washer 12mm to 16mm No. 2.50
37 Aluminium Section Kg. 216.00
38 Nylon / PVC Gasket R.Mt. 35.00
39 Alluminium Screw 32 x 6 mm, 25 x 6 mm Doz. 32.00
40 Concealed locking arrangement of 100 mm length for sliding window No.
151.00
41 Alluminium Grill 7.50 mm thick Sq.Mt. 1410.00
42 Hydraulic floor spring heavy duty ( 150 Kg capacity) ISI mark No. 1350.00
43 Iron Oxidized sliding door bolt 200 mm length, 12 mm dia No. 99.00
44 Powder and Chemicals for colour anodizing process of alluminium Kg.
53.00
sections
45 Lock for Sliding Shutter No. 162.00
46 All Bearing Roller No. 124.00
47 All Frame Rail Angle Kg. 266.00
48 Welding Electrodes No. 7.00
49 C.R.C. Sheet Sq.Mt. 851.00
50 Abstrone Butadyne Styrine (ABS) Door Shutter including No.
847.00
Transportation
51 Puff Insulation 35-40 Kg/Cumt. Density Kg. 346.00
52 PVC Door Shutter 34 mm thick Factory Made Shutter Sq.Mt. 4600.00
53 FRP Door Shutter 30 mm thick Factory Made Shutter Sq.Mt. 1509.00
54 FRP Door Shutter 35 mm thick Factory Made Shutter Sq.Mt. 1650.00
55 Bison Pannel Sq.Mt. 642.00
56 PVC factory made solid panel door shutter with stainless steel Sq.Mt.
4550.00
fixutres & fastening
57 PVC factory made flush door 30 mm with stainless steel fixutres & Sq.Mt.
4350.00
fastening
58 Sliding door bolt Chromium plated 250mm No. 94.00
Page 530
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
59 Acrylic Plain Sheet 3 mm Sq.Mt. 1050.00
60 Aldrop Stainless steel 300*16mm No 412.00
61 Aldrop Stainless steel 250*16 mm No 400.00
62 Handle 150mm Stainless Steel (Rounded Shape) No 41.00
63 Handle 200mm Stainless Steel (Rounded Shape) No 86.00
64 Stainless Steel Hinges - 100mm 14 gauge (Heavy Duty) No 51.00
65 Stainless Steel Hinges - 125mm 14 gauge (Heavy Duty) No 82.00
66 Housing box to rolling shutter Smt 1634.00
67 Mechanical Gear For Rolling Shutter No 2592.00
68 Door Stopper Stainless Steel No 173.00
69 Tower Bolt Stainless Steel 200 mm No. 108.00
70 Tower Bolt Stainless Steel 250 mm No. 212.00
71 Sliding Door Bolt Stainless Steel 250 mm No. 135.00
72 Handle Stainless Steel 100 mm No. 54.00
73 Eye Hole Lens No. 284.00
74 Rolling Shutter Smt. 2345.00
75 Ply Wood Smt. 539.00
76 Stainless steel hooks and eyes 200 mm No. 87.00
77 Steel Window Kg. 63.00
78 Powder Coating Sq.Mt. 583.00
79 Rubber Lining R.Mt. 34.00
80 Ply wood 9 mm thick Sq.Mt. 566.00
81 Laminated board double 12mm thick Sq.Mt. 1020.00
82 Alluminium Section anodized Kg. 316.00
83 Handle iron oxidised 150 mm No. 74.00
84 Hinges iron oxidised 100 mm No. 54.00
85 T. W. Particle board, both face laminated 12 mm Smt. 547.00
86 Battens T.W. 70 x 45 mm Cmt. 92734.00
87 Nuts and Bolts Nos. 140.00
88 Plain FRP Sheet 22 B.W.G. Smt. 3041.00
89 TW Runner (6" x 3") Cmt. 98424.00
90 Alluminium Screw Doz. 11.00
91 F Patti Kg. 267.00
92 Teak wood planks above 2.5m length Cu.Mt. 74388.00
93 Vision Panel No. 260.00
94 Solid core shutter 35 mm thick with commercial veneer facing and Sq.mt.
1470.00
phenol bonded
95 Oil Paint Ltr. 344.00
96 Acrylic Plain Sheet 2 mm thick Sq.Mt. 900.00
97 Aluminium Sheet 24 B.W.G Sq.mt. 522.00
98 Alluminium Section with Powder Coating Kg. 266.00
99 Concealed lock No. 170.00
100 Mosquito proof Nylone net Sq.Mt. 288.00
101 Solid Core commercial shutter 30mm thick phenol bonded with face Sq.Mt.
1120.00
veneer 3 mm thick both side with bidding patty
101 Toughned Glass 12mm Sq.Mt. 5500
102 Toughned Glass 8mm Sq.Mt. 4000
103 Toughned Glass 6mm Sq.Mt. 2500.00
104 Plain Glass 6mm Sq.Mt. 1200.00
105 Alluminium SECTION WITH COATING Kg 400.00
106 6mm one way glass ST 1 Sq.Mt. 1500.00
107 silicone sealant 789 No. 450.00
108 polycarbonate 10mm Sq.Mt. 1500.00
109 polycarbonate 16mm Sq.Mt. 2500.00
110 polycarbonate 6mm Sq.Mt. 1100.00
Building (Bd-V : Water supply and sanitory fittings)
1 G.I. Pipe 100mm dia. Medium type R.Mt. 1040.00
Page 531
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
2 G.I. Pipe 100mm dia. Heavy type R.Mt. 1275.00
3 G.I. Pipe 15mm dia. Medium type R.Mt. 175.00
4 G.I. Pipe 15mm dia. Heavy type R.Mt. 218.00
5 G.I. Pipe 20mm dia. Medium type R.Mt. 202.00
6 G.I. Pipe 20mm dia.Heavy type R.Mt. 244.00
7 G.I. Pipe 25mm dia. Medium type R.Mt. 248.00
8 G.I. Pipe 25mm dia. Heavy type R.Mt. 335.00
9 G.I. Pipe 32mm dia. Medium type R.Mt. 306.00
10 G.I. Pipe 32mm dia.Heavy type R.Mt. 364.00
11 G.I. Pipe 40mm dia. Medium type R.Mt. 363.00
12 G.I. Pipe 40mm dia. Heavy type R.Mt. 419.00
13 G.I. Pipe 50mm dia. Medium type R.Mt. 487.00
14 G.I. Pipe 50mm dia. Heavy type R.Mt. 565.00
15 G.I. Pipe 65mm dia. Medium type R.Mt. 615.00
16 G.I. Pipe 65mm dia. Heavy type R.Mt. 721.00
17 G.I. Pipe 80mm dia. Medium type R.Mt. 752.00
18 G.I. Pipe 80mm dia. Heavy type R.Mt. 968.00
19 PVC Nahani Trap 75 mm No. 131.00
20 G.I.Clamps 100mm to 150mm No. 30.00
21 PVC Nahani Trap 150 mm No. 167.00
22 G.I.Clamps 12mm to 32mm No. 29.00
23 G.I.Clamps 40mm to 80mm No. 21.00
24 Anglo Indian W.C. Pan Colour No. 1286.00
25 G.I.Fixtures Kg. 108.00
26 P.V.C. Cowl 100 mm No. 75.00
27 G.I.Screws 30mm No. 7.00
28 G.I.Screws 40mm No. 8.00
29 G.I.Union 25mm dia. No. 110.00
30 Gully trap cover with frame No. 684.00
31 Gun Metal stop tap with crutch wheel 20mm No. 394.00
32 Gun metal stop tap with crutch wheel 25mm No. 903.00
33 Gun metal stop tap with crutch wheel 15mm No. 418.00
34 Gun metal stop tap with crutch wheel 20mm No. 684.00
35 C.I.Bend 75mm dia. No. 323.00
36 C.I.Bend 100mm dia. No. 382.00
37 C.I.Bip tap 12mm No. 113.00
38 C.I.Grating 150mm dia. No. 142.00
39 C.I.Grating 100mm dia. No. 80.00
40 C.I.Grating 75mm dia. No. 51.00
41 C.I.Brackets Pair 139.00
42 C.I.Collers 100mm dia. No. 318.00
43 C.I.Copllers 75mm dia. No. 259.00
44 C.I.Cover 45*30 cm with frame No. 595.00
45 C.I.Cowl / Vent 100mm dia. No. 385.00
46 C.I.Cowl / Vent 150mm dia. No. 735.00
47 C.I.Cowl / Vent 75mm dia. No. 299.00
48 C.I.Hinged Cover with frame No. 615.00
49 C.I.Man hole cover 50 kg. No. 4040.00
50 C.I.Man hole cover 75 kg. No. 5831.00
51 C.I.Man hole cover 100 kg. No. 7735.00
52 C.I.Man hole cover 175 kg.Heavy (0.9*0.45m) No. 14820.00
53 C.I.Nahani trap 100mm dia.(375mm long) No. 484.00
54 C.I.Nahani trap 75 to 80mm dia.(375mm long) No. 365.00
55 C.I.100*75*300 long arm (wt. 6kg)nahani trap No. 1175.00
56 C.I.Soil pipe 100mm dia. R.Mt. 1035.00
57 C.I.Soil pipe 150mm dia. R.Mt. 1900.00
Page 532
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
58 C.I,Soil pipe 75 to 80mm dia. R.Mt. 820.00
59 C.I.Shoe 75 mm dia. No. 304.00
60 C.I. Shoe 100 mm dia. No. 439.00
61 C.I.Shoe 150mm No. 559.00
62 Ball cock 15mm dia.P.V.C.FLOAT No. 335.00
63 Ball cock 25mm dia.P.V.C.FLOAT No. 650.00
64 Ball cock 40mm dia.P.V.C.FLOAT No. 783.00
65 Ball cock 50mm dia.P.V.C.FLOAT No. 2249.00
66 Bib cock stop tap brass heavy 15mm No. 441.00
67 Bib cock stop tap brass heavy 20mm No. 678.00
68 Bib cock stop tap brass heavy 25mm No. 995.00
69 Bib tap 12mm brass medium No. 285.00
70 Colour wash hand basin 55*40cm No. 1511.00
71 Colour wash hand basin 63*45cm No. 1569.00
72 White glazed wash basin 45*30cm No. 1316.00
73 White glazed wash hand basin 55*50cm No. 1809.00
74 P.V.C. flexible Waste Pipe 32 mm dia No. 59.00
75 White Glazed Wash Hand Basin 63 x 45 cm No. 2415.00
76 Sink white glazed 45*20*30cm No. 913.00
77 Pedestal for wash basin (standard size) No. 2318.00
78 C.C.Septic tank 0.9m dia.(2.5m long) No. 9250.00
79 C.C.Septic tank 1.20m dia.(2.5m long) No. 12729.00
80 C.I.Steps for manhole No. 633.00
81 C.I.Cover with frame (Gully trap) No. 254.00
82 C.I.Plug Bend 150MM dia. No. 1308.00
83 Clamp for G.I.pipe 25mm No. 17.00
84 Colour European type W.C.Pan No. 5064.00
85 European type glazed W.C.pan No. 5080.00
86 W.C.PAN Coloured glazed 64CM.(Orissa) No. 2800.00
87 W.C.PAN White glazed 58 CM.Indian No. 2663.00
88 W.C.PAN White glazed 57.50 CM (Orissa) No. 1072.00
89 Fibre flushing tank for W.C. No. 792.00
90 Flushing tank automatic Urinal 10ltr. C.I. No. 1052.00
91 Flushing tank automatic Urinal 5ltr. (P.V.C.) No. 772.00
92 Low level flush pr. St. 10ltr. No. 1396.00
93 Flat back Urinal No. 1625.00
94 Stall Type Urinal No. 4919.00
95 Lipped type Urinal No. 659.00
96 Coloured glazed full stall Urinal No. 4746.00
97 Bleaching Powder Kg. 84.00
98 Potassium Permanganate Kg. 420.00
99 Nylon Brush No. 78.00
100 Duster No. 93.00
101 Plastic Bucket No. 137.00
102 Coir Kg. 73.00
103 Gunny Cloth R.Mt. 48.00
104 Kharata No. 51.00
105 Wheel stop tap brass 15mm No. 313.00
106 Wheel stop tap brass 20mm No. 405.00
107 Wheel stop tap brass 25mm No. 592.00
108 Socket brass for 32mm tap No. 67.00
109 Socket brass for 40mm tap No. 80.00
110 Socket brass for 50mm tap No. 133.00
111 Socket brass for 65mm tap No. 195.00
112 Socket for 100mm tap No. 494.00
113 Socket for 15mm tap No. 27.00
Page 533
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
114 Socket for 20mm tap No. 37.00
115 Socket for 25mm tap No. 47.00
116 Socket for 32mm tap No. 78.00
117 Socket for 40mm tap No. 88.00
118 Socket for 50mm tap No. 142.00
119 Socket for 65mm tap No. 215.00
120 Socket for 80mm tap No. 323.00
121 Span Yarn No. 174.00
122 Strainer for 100mm No. 2970.00
123 Strainer for 40mm No. 585.00
124 Strainer for 50mm No. 882.00
125 Strainer for 80mm No. 1978.00
126 Strainer for 15mm No. 179.00
127 Strainer for 20mm No. 188.00
128 Strainer for 25mm No. 310.00
129 Stone ware pipe 100mm dia. R.Mt. 126.00
130 Stone ware pipe 150mm dia. R.Mt. 171.00
131 Stone ware pipe 225mm dia. R.Mt. 239.00
132 Stone ware glazed pipe half round 100mm dia. R.Mt. 173.00
133 Stop tap brass with crunch wheel 15mm dia. No. 130.00
134 Towel rod with clamps 16mm dia. No. 219.00
135 Mirror 40*50cm. With plastic frame No. 337.00
136 Brass T Thimble Socket 32mm dia. Pair 137.00
137 Brass wheel stop tap 32mm dia. No. 636.00
138 Brass wheel stop tap 40mm dia. No. 783.00
139 Brass wheel stop tap 50mm dia. No. 1389.00
140 Brass wheel stop tap 65mm dia. No. 1911.00
141 Brass wheel stop tap 80mm dia. No. 3106.00
142 Half turn flush cock 25mm dia. No. 712.00
143 12mm flexible inlet pipe connection No. 331.00
144 Bell mouth cover 100mm dia. No. 98.00
145 Box chamber with lock 0.6*0.45m No. 695.00
146 Brass nozzle pillar tap 12mm No. 292.00
147 Black bakelite seat to european closer No. 430.00
148 Concussion push button type gun metal tap 15 to 25mm dia. No. 197.00
149 Coupling cast Iron 100mm dia. No. 417.00
150 Coupling cast Iron 80mm dia. No. 376.00
151 Chromium plated 12mm dia.bib cock No. 92.00
152 C.I.Trap grating 15*10 cm No. 98.00
153 C.I.Y junction 100mm dia. No. 959.00
154 C.I.Y junction 150mm dia. No. 2131.00
155 C.I.Y junction 75mm dia. No. 661.00
156 Enameled bend 40mm dia. No. 245.00
157 Ferrul for C.I.pipr 100mm No. 190.00
158 White glazed foot rest chequred 25*10 cm Pair 199.00
159 Half round earthware pipe 100mm(60cm long) No. 124.00
160 Half round earthware pipe 150mm(60cm long) No. 371.00
161 Jute Rope Kg. 120.00
162 Half round chaina ware pipe 100mm(60cm long) No. 119.00
163 Lead pipe 32mm dia. R.Mt. 385.00
164 Mohagani seat with lid No. 371.00
165 Mosquito proof coupling No. 56.00
166 Non-return valve 15mm for water meter No. 210.00
167 Non-return valve 25mm for water meter No. 391.00
168 Non-return valve 20mm for water meter No. 280.00
169 Piller tap 12mm dia.chromium plated heavy No. 552.00
Page 534
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
170 P.Trap and lead pipe upto 40mm dia. No. 346.00
171 Rubber gasket (25, 28 and 20 cm) R.Mt. 195.00
172 Rubber Incertion Kg. 353.00
173 Rubberised adhesive Ltr. 375.00
174 Salt glazed stone ware gully trap (150*150mm) No. 153.00
175 Self project tap brass chromium plated 15mm No. 160.00
176 Sewer trap No. 782.00
177 Shower rose chromium plated brass 10cm No. 323.00
178 P.V.C. pipe 15mm dia.10kg/cm2 pressure(class IV) R.Mt. 32.00
179 P.V.C. pipe 20mm dia.10kg/cm2 pressure(class IV) R.Mt. 60.00
180 P.V.C. pipe 25mm dia.10kg/cm2 pressure(class IV) R.Mt. 80.00
181 P.V.C. pipe 32mm dia.10kg/cm2 pressure(class IV) R.Mt. 124.00
182 P.V.C. pipe 40mm dia.10kg/cm2 pressure(class IV) R.Mt. 166.00
183 P.V.C. pipe 50mm dia.10kg/cm2 pressure(class IV) R.Mt. 282.00
184 P.V.C. pipe 60mm dia.10kg/cm2 pressure(class IV) R.Mt. 366.00
185 P.V.C. pipe 75mm dia.4 kg/cm2 pressure(class II) R.Mt. 244.00
186 P.V.C. 75 mm Soil Pipe 6 Kg/cm2 Pressure R.Mt. 279.00
187 P.V.C. pipe 90mm dia.4 kg/cm2 pressure(class II) R.Mt. 252.00
188 P.V.C.pipe 110mm dia.4kg/cm2 pressure (class II) R.Mt. 348.00
189 P.V.C. 110 mm Rain Water Pipe 6Kg/cm2 Pressure R.Mt. 255.00
190 P.V.C. 110 mm Soil Pipe 6 Kg/cm2 Pressure R.Mt. 392.00
191 P.V.C.pipe 140mm dia.4kg/cm2 pressure (class II) R.Mt. 566.00
192 P.V.C.pipe 160mm dia.4kg/cm2 pressure (class II) No. 738.00
193 P.V.C.pipe 160mm dia.Soil Pipe R.Mt. 770.00
194 P.V.C.pipe 160mm dia. Rain Water Pipe R.Mt. 774.00
195 P.V.C.Socket 15mm dia. No. 9.00
196 P.V.C.Socket 20mm dia. No. 11.00
197 P.V.C.Socket 25mm dia. No. 15.00
198 P.V.C.Socket 32mm dia. No. 17.00
199 P.V.C.Socket 40mm dia. No. 25.00
200 P.V.C.Socket 50mm dia. No. 41.00
201 P.V.C.Socket 60mm dia. No. 61.00
202 P.V.C.Flushing tank (12 ltr. Capacity) No. 1073.00
203 Flush valve 32mm dia. No. 1653.00
204 Ferocret tank Ltr. 14.00
205 Stainless Steel sink of size 600*510*200mm of nirali or equivalent No.
7322.00
make
206 C.P.pillar cock jaquar make continental (Cat.No. CON-011) No. 874.00
207 C.P.pillar cock (ISI) jaquar make continental No. 894.00
208 C.P.pillar cock long neck with aerator jaquar make continental No.
1119.00
(Cat.No. CON- 021)
209 C.P.Bib cock (ISI) jaquar make continental (Cat.No. CON-037) No. 778.00
210 C.P.Bib Cock long thread jaquar make continental (Cat.No. CON- No.
658.00
039)
211 C.P.2-way bib cock jaquar make continental (Cat.No. CON-041) No.
982.00
212 C.P.bib cock with wall flange long thread jaquar make continental No.
795.00
(Cat.No. CON- 047)
213 C.P.Bib cock with nozzle jaquar make continental (Cat.No. CON- No.
799.00
049)
214 C.P.Angular stop cock jaquar make continental (Cat.No. CON-053) No.
794.00
215 C.P.Angular stop cock long thread jaquar make continental (Cat.No. No.
1997.00
CON-055)
216 C.P.angular stop cock with wall flange jaquar make continental No.
686.00
(Cat.No. CON- 059)
Page 535
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
217 C.P.central hole basin mixer without popup waste system with No.
450mm long braided hoses jaquar make continental (Cat.No. CON- 2511.00
167B)
218 C.P.wall mixer with telephone shower arragnement only but without No.
teltphone shower crutch jaquar make continental (Cat.No. CON- 3036.00
217)
219 C.p.wall mixer non-telephonic shower arrangement jaquar make No.
2608.00
continental (Cat.No. CON-219)
220 C.P.wall mixer(wall mounted model) with telephone shower No.
arrangement only and with telephone shower crutch jaquar make 3428.00
continental (Cat.No. CON-267)
221 C.P.wall mixer with provision for overhead shower with 115mm No.
long bend pipe and wall flange jaquar make continental (Cat.No. 3495.00
CON-273UPR)
222 C.P.sink mixer with swinging casted spout (wall mounted) jaquar No.
2318.00
make continental (Cat.No. CON-309)
223 C.P.sink mixer swinging spout (table mounted model) 450mm long No.
braided hoses jaquar make continental (Cat.No. CON-309B) 3237.00
224 C.P.sink cock with swinging casted spout jaquar make continental No.
1188.00
(Cat.No. CON- 347)
225 C.P.sink cock with raised 'J' shaped swinging casted spout (table No.
1529.00
mounted) jaquar make continental (Cat.No. CON- 359)
226 C.p.shower arm 190mm long light body with wall flange jaquar No.
484.00
make continental (Cat. No. SHA - 477)
227 C.P.Flush cock with wall flange 25mm with plain knob jaquar make No.
1553.00
continental (Cat.No. FLR 6081)
228 C.P.Towel rail 24" jaquar make continental (Cat. No. ACN 1111N ) No.
974.00
229 C.P.Towel ring square jaquar make continental (Cat. No. ACN No.
898.00
1121N )
230 C.P.Soap dish hooker jaquar make continental (Cat. No. AKB 35731 No.
758.00
)
231 C.P.soap dish (polyurethane) jaquar make continental (Cat. No. No.
977.00
AQN 7733 )
232 C.P.Toilet paper holder jaquar make continental (Cat. No. AQ 7751 No.
999.00
)
233 C.P.Toilet rack 24"with lower hanger jaquar make continental (Cat. No.
2238.00
No. ACN 1181N )
234 C.P.Handshower (health faucet) 1m.PVC tube with wall hook jaquar No.
900.00
make (Cat. No. ALD 563 )
235 C.P.Pillar cock jaquar make queen's collection (quarter turn fitting) No.
1792.00
(Cat. No. QQT 7011 )
236 C.P.Bib cock with wall flange aqua make queen's collection (quarter No.
1553.00
turn fitting) (Cat. No. QQT7037 )
237 C.P.2-way bib cock with wall flange aqua make queen's collection No.
1883.00
(quarter turn fitting) (Cat. No. QQT 7041 )
238 C.P.Angular stop cock with wall flange aqua make queen's No.
1189.00
collection (quarter turn fitting) (Cat. No. QQT 7053 )
239 C.P.central hole basin mixer with regular spout without popup waste No.
system with 450mm long braided hoses jaquar make queen's 3564.00
collection (quarter turn fitting) (Cat. No. QQT 7167bB )
240 C.P.central hole basin mixer with regular spout with popup waste No.
system with 450mm long braided hoses jaquar make queen's 3991.00
collection (quarter turn fitting) (Cat. No. QQT 7169b )
Page 536
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
241 C.P.central hole basin mixer with small spout without popup waste No.
system with 450mm long braided hoses jaquar make queen's 3250.00
collection (quarter turn fitting) (Cat. No. QQT 7171B)
242 C.P.wall mixer (wall mounted model) with telephonic shower No.
arrangement only but without crutch jaquar make queen's collection 4128.00
(quarter turn filling) (Cat. No. QQT 7217 )
243 C.P.wall mixer non-telephonic shower system jaquar make queen's No.
4165.00
collection (quarter turn filling) (Cat. No. QQT 7219 )
244 C.P.wall mixer (wall mounted model) with telephonic shower No.
arrangement only and with telephone shower crutch jaquar make 4975.00
queen's collection (quarter turn filling) (Cat. No. QQT 7267)
245 Hydraulic door closer No. 1443.00
246 cPVC pipe 15mm dia. R.Mt. 62.00
247 cPVC pipe 20mm dia. R.Mt. 88.00
248 cPVC pipe 25mm dia. R.Mt. 140.00
249 cPVC pipe 32mm dia. R.Mt. 194.00
250 cPVC pipe 40mm dia. R.Mt. 280.00
251 cPVC pipe 50mm dia. R.Mt. 442.00
252 cPVC Coupling for 15mm dia. No. 15.00
253 cPVC Coupling for 20mm dia. No. 17.00
254 cPVC Coupling for 25mm dia. No. 29.00
255 cPVC Coupling for 32mm dia. No. 57.00
256 cPVC Coupling for 40mm dia. No. 105.00
257 cPVC Coupling for 50mm dia. No. 198.00
258 uPVC pipe 15mm dia. R.Mt. 47.00
259 uPVC pipe 20mm dia. R.Mt. 73.00
260 uPVC pipe 25mm dia. R.Mt. 125.00
261 uPVC pipe 32mm dia. R.Mt. 179.00
262 uPVC pipe 40mm dia. R.Mt. 265.00
263 uPVC pipe 50mm dia. R.Mt. 427.00
264 uPVC Coupling for 15mm dia. No. 14.00
265 uPVC Coupling for 20mm dia. No. 16.00
266 uPVC Coupling for 25mm dia. No. 27.00
267 uPVC Coupling for 32mm dia. No. 54.00
268 uPVC Coupling for 40mm dia. No. 102.00
269 uPVC Coupling for 50mm dia. No. 192.00
270 Elbow 90 Degree for 15mm dia. No. 22.00
271 Elbow 90 Degree for 20mm dia. No. 27.00
272 Elbow 90 Degree for 25mm dia. No. 41.00
273 Elbow 90 Degree for 32mm dia. No. 89.00
274 Elbow 90 Degree for 40mm dia. No. 161.00
275 Elbow 90 Degree for 50mm dia. No. 207.00
276 Tee for 15mm dia. No. 27.00
277 Tee for 20mm dia. No. 36.00
278 Tee for 25mm dia. No. 52.00
279 Tee for 32mm dia. No. 119.00
280 Tee for 40mm dia. No. 197.00
281 Tee for 50mm dia. No. 410.00
282 End cap for 15mm dia. No. 13.00
283 End cap for 20mm dia. No. 17.00
284 End cap for 25mm dia. No. 23.00
285 End cap for 32mm dia. No. 47.00
286 End cap for 40mm dia. No. 69.00
287 End cap for 50mm dia. No. 141.00
288 Ball cock for 15mm dia. No. 122.00
289 Ball cock for 12mm dia. No. 177.00
Page 537
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
290 Ball cock for 25mm dia. No. 333.00
291 Ball cock for 32mm dia. No. 581.00
292 Ball cock for 40mm dia. No. 932.00
293 Araldite adhesive Kg 1502.00
294 Ball valves for 50mm dia. No. 1597.00
295 Male adapter (Brass Threads) for 15mm dia. No. 173.00
296 Male adapter (Brass Threads) for 20mm dia. No. 223.00
297 Male adapter (Brass Threads) for 25mm dia. No. 328.00
298 Male adapter (Brass Threads) for 32mm dia. No. 667.00
299 Male adapter (Brass Threads) for 40mm dia. No. 826.00
300 Male adapter (Brass Threads) for 50mm dia. No. 1513.00
301 Male adapter (Plastic Threads) for 15mm dia. No. 18.00
302 Male adapter (Plastic Threads) for 20mm dia. No. 26.00
303 Male adapter (Plastic Threads) for 25mm dia. No. 36.00
304 Male adapter (Plastic Threads) for 32mm dia. No. 63.00
305 Male adapter (Plastic Threads) for 40mm dia. No. 94.00
306 Male adapter (Plastic Threads) for 50mm dia. No. 174.00
307 Female adapter (Brass Threads) for 15mm dia. No. 166.00
308 Female adapter (Brass Threads) for 20mm dia. No. 204.00
309 Female adapter (Brass Threads) for 25mm dia. No. 323.00
310 Female adapter (Brass Threads) for 32mm dia. No. 651.00
311 Female adapter (Brass Threads) for 40mm dia. No. 763.00
312 Female adapter (Brass Threads) for 50mm dia. No. 1439.00
313 Female adapter (Plastic Threads) for 15mm dia. No. 25.00
314 Female adapter (Plastic Threads) for 20mm dia. No. 34.00
315 Female adapter (Plastic Threads) for 25mm dia. No. 48.00
316 Union for 15mm dia. No. 93.00
317 Union for 20mm dia. No. 117.00
318 Union for 25mm dia. No. 131.00
319 Union for 32mm dia. No. 181.00
320 Union for 40mm dia. No. 295.00
321 Union for 50mm dia. No. 535.00
322 Cross for 15mm dia. No. 36.00
323 Cross for 20mm dia. No. 70.00
324 Step over Bend 15mm dia. No. 70.00
325 Step over Bend 20mm dia. No. 115.00
326 Tee holder for 15mm dia. No. 36.00
327 Tee holder for 32mm dia. No. 103.00
328 End plug threaded for 15mm dia. No. 18.00
329 R.C.C.Chamber cover with frame 90cm*45cm Heavy Duty 225kg No.
4185.00
330 R.C.C.Chamber cover with frame 90cm*45cm Medium Duty 140kg No.
2698.00
331 R.C.C.Chamber cover with frame 60cm*45cm Heavy Duty 160kg No.
3778.00
332 R.C.C.Chamber cover with frame 60cm*45cm Medium Duty 100kg No.
2337.00
333 I.S.I.Ferrul Connection15mm dia. No. 614.00
334 I.S.I.Ferrul Connection 20mm dia. No. 989.00
335 I.S.I.Ferrul Connection 25mm dia. No. 1663.00
336 I.S.I.Ferrul Connection 32mm dia. No. 2851.00
337 I.S.I.Ferrul Connection 40mm dia. No. 4078.00
338 I.S.I.Ferrul Connection 50mm dia. No. 6974.00
339 Water meter 15 mm diameter No. 1655.00
340 Water meter 20 mm diameter No. 2600.00
341 Water meter 25 mm diameter No. 4079.00
Page 538
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
342 Water meter 40 mm diameter No. 6768.00
343 Water meter 50 mm diameter No. 9140.00
344 Water meter 80 mm diameter No. 14638.00
345 Water meter 100 mm diameter No. 21282.00
346 Non return Valve 40 mm diameter No. 1837.00
347 Non return Valve 50 mm diameter No. 2653.00
348 Non return Valve 80 mm diameter No. 7400.00
349 Non return Valve 100 mm diameter No. 14112.00
350 Colour Wash Hand Basin 0.45 x 0.30 No. 889.00
351 White Glaze Earth Sink 0.6 x 0.2 x 0.45 No. 2088.00
352 Clamp for G.I.pipe 200mm No. 44.00
353 Earopean type glazed W.C.pan 68cm No. 3018.00
354 Earopean white glazed earthen ware closet pan No. 2978.00
355 P.V.C. Nahni Trap R.Mt. 187.00
356 P.V.C. Connector. 15 mm dia No. 75.00
357 Low level flushing cistern No. 1299.00
358 Upvc sanitary pipes all 20 mm dia. R.Mt. 107.00
359 Upvc sanitary pipes all 75 mm dia. R.Mt. 246.00
360 Bib cock stop tap brass heavy 15mm No. 962.00
361 Stainless Steel sink of size 610 x 460 x 200 mm of nirali or No.
11813.00
equivalent make
362 Upvc sanitary pipes all 63 mm dia. R.Mt. 1724.00
363 W.C.PAN Colour glazed 57.50 CM (Orissa) No. 1716.00
364 Piller cock mixer & Angle cock No. 937.00
365 Upvc sanitary pipes all 25 mm dia. R.Mt. 468.00
366 Upvc sanitary pipes all 15 mm dia. R.Mt. 218.00
367 Cement bags 300.00
368 Upvc sanitary pipes all 40 mm dia. R.Mt. 739.00
369 Upvc sanitary pipes all 50 mm dia. R.Mt. 1052.00
370 Stainless Steel sink of size 470 x 420 x 178 mm of nirali or No.
5913.00
equivalent make
371 Bib cock Long Arm No. 347.00
372 Bottletrap wash basin 32 mm Cromium Plated No. 1696.00
373 Upvc sanitary pipes all 32 mm dia. R.Mt. 598.00
374 Hamp rope Kg. 111.00
375 Bib cock cock stop tap brass heavy 15 mm No. 486.00
376 Colour wash hand basin 45*30cm No. 888.00
377 Ultra 250 mm. dia. uPVC 90 degree junction chamber base with U No.
1157.00
trap
378 Ultra 250 mm.dia. uPVC Cover & Frame No. 497.00
379 uPVC Blanking Plug 110 mm No. 317.00
380 uPVC 90 degree bend No. 298.00
381 Ultra Shaft 250x470mm No. 415.00
382 Water jet with accessories No. 419.00
383 White glazed full stall urinal No. 5187.00
384 Glass plain 6mm thick Sq.Mt. 1101.00
385 White Glazed Earthenware Squatting plate (Ladies Urinal) No. 777.00
386 Autoclosing pillar cock of pressmatic tap No. 1818.00
387 PVC Aqua kraft type super bib tap 15 mm No. 240.00
388 PVC Aqua kraft type super Two Way bib tap 15 mm No. 467.00
389 Super push button type cock / tap with flange 15 mm No. 261.00
390 PVC Aqua kraft type super jet spray 15 mm No. 510.00
391 PVC Aqua kraft type super right angle stop tap No. 266.00
392 PVC Aqua kraft type super Pillar tap 15 mm No. 400.00
393 Fixing in CC BK Clamp, Battan No. 30.00
394 Wall Mounted European type glazed W.C.pan No. 8547.00
Page 539
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
395 Super wall sink type tap with flange 15 mm No. 713.00
396 Two Way bib tap with flange No. 466.00
397 super jet spray with flange 2 in 1 faucet 1.50 metre long No. 511.00
Page 540
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
836 R.C.C.Pipe 450mm dia.(Np3)2.5m long R.Mt. 2085.00
837 R.C.C.pipe Np2 class 1000mm dia. 2.5m long R.Mt. 3763.00
838 R.C.C.Np2 Pipe Collar 1000 mm Dia. No. 575.00
839 R.C.C.pipe Np2 class 1200mm dia. 2.5m long R.Mt. 5497.00
840 R.C.C.Np2 Pipe Collar 1200 mm Dia. No. 803.00
841 R.C.C.pipe Np2 class 1800mm dia. 2.5m long R.Mt. 9170.00
842 R.C.C.pipe Np2 class 900mm dia. 2.5m long R.Mt. 3299.00
843 R.C.C.Np2 Pipe Collar 900 mm Dia. No. 465.00
844 R.C.C.pipe Np2 class 800mm dia. 2.5m long R.Mt. 2758.00
845 R.C.C.Np2 Pipe Collar 800 mm Dia. No. 282.00
846 R.C.C.pipe Np2 class 700mm dia. 2.5m long R.Mt. 2332.00
847 R.C.C.pipe Np2 class 600mm dia. 2.5m long R.Mt. 1655.00
848 R.C.C.Np2 Pipe Collar 600 mm Dia. No. 261.00
849 R.C.C.pipe Np2 class 500mm dia. 2.5m long R.Mt. 1318.00
850 R.C.C.pipe Np2 class 450mm dia. 2.5m long R.Mt. 1074.00
851 R.C.C.Np2 Pipe Collar 450 mm Dia. No. 107.00
852 R.C.C.pipe Np2 class 100mm dia. 2m long R.Mt. 327.00
853 R.C.C.pipe Np2 class 150mm dia. 2m long R.Mt. 346.00
854 R.C.C.pipe Np2 class 225mm dia. 2m long R.Mt. 392.00
855 R.C.C.pipe Np2 class 300mm dia. 2m long R.Mt. 642.00
29 RCC Pipe Np 4 heavy duty non presure pipe 1000 mm diameter R.Mt. 8266.00
856 RCC Pipe Np4 heavy duty non presure pipe 1200 mm diameter R.Mt. 9824.00
857 RCC Pipe Np4 heavy duty non presure pipe 900 mm diameter R.Mt. 6629.00
General Rates
1 Cement M.T. 6000.00
2 Structural Steel M.T. 62575.00
3 TMT FE - 500 M.T. 61000.00
4 HCRM/CRS Reinforcement M.T. 63755.00
5 Tubular steel M.T. 65720.00
6 Bitumen VG 10 (Bulk) (80/100) M.T. 49488.00
7 Bitumen VG 30 (Bulk) (60/70) M.T. 49862.00
8 Bitumen VG 40 (Bulk) (30/40) M.T. 52764.00
9 Bitumen VG 30 (Packed) (60/70) M.T. 59411.00
10 Bitumen VG 40 (Packed) (30/40) M.T. 64748.00
11a Bitumen VG 10 (Packed) (80/100) M.T. 57913.00
12 Sand - Natural/V.S.I.(Vertical Shaft Impact Crusher)Quality Cu.Mt.
1670.00
Artifitial Sand
13 Sand - Crushed Cu.Mt. 1200.00
14 Natural Sand - Screened (for plaster work only) Cu.Mt. 1781.00
15 Bricks II Class No. 8.50
16 Rubble stone excluding royalty Cu.Mt. 653.00
17 Aggregate 40 mm (Hand Broken) Blasted excluding royalty Cu.Mt. 900.00
18 Aggregate 25 mm Cu.Mt. 1050.00
19 Aggregate 20 mm Cu.Mt. 1050.00
20 Aggregate 12 mm Cu.Mt. 1050.00
21 Aggregate 10 mm Cu.Mt. 1050.00
22 Aggregate 6 mm Cu.Mt. 1050.00
23 Stone Dust Cu.Mt. 835.00
24 Soft Murum Cu.Mt. 313.00
25 Hard Murum Cu.Mt. 316.00
26 Water 1000 lit. 213.00
27 White Cement Kg. 36.00
28 Plasticizer Ltr. 193.00
29 Stainless Steel Plate Kg. 218.00
30 EMULSION RS1 ( Hincol) BULK M.T. 40000.00
31 EMULSION RS1 ( Hincol) Packed M.T. 42500.00
Page 541
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
31 WASTE PLASTIC to be used in bituminous treatment as per IRC Kg.
65.00
SP-098-2013
32 Portland Slag Cement (PSC) Bag 364.00
34 Ground Granulated Blast Furnance Slag (GGBS) M.T. 4300.00
Page 542
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
38 Aggregates 13.2 mm to 10 mm Cu.Mt. 1050.00
39 Aggregates 20 mm to 10 mm Cu.Mt. 1050.00
40 Aggregates 25 mm to 10 mm Cu.Mt. 1050.00
41 Aggregates 19 mm to 6 mm Cu.Mt. 1050.00
42 Aggregates 37.5 mm to 19 mm Cu.Mt. 1050.00
43 Aggregates 37.5 mm to 25 mm Cu.Mt. 1050.00
47 Aggregates 6 mm nominal size Cu.Mt. 1050.00
44 Aggregates 10 mm nominal size Cu.Mt. 1050.00
45 Aggregates 13.2/12.5 mm nominal size Cu.Mt. 1050.00
46 Aggregates 20 mm nominal size Cu.Mt. 1050.00
47 Aggregates 25 mm nominal size Cu.Mt. 1050.00
48 Aggregates 40 mm nominal size Cu.Mt. 1050.00
49 Binding wire Kg. 74.00
50 Bitumen ( Cationic Emulsion ) M.T. 40000.00
51 Bitumen VG-30 (bulk (60-70 grade)) M.T. 49862.00
52 Bitumen VG -10 (bulk (80-100 grade )) M.T. 49488.00
53 Bitumen (Cutback ) M.T. 49000.00
54 Bitumen (emulsion) M.T. 40000.00
55 Bitumen (modified graded) (bulk Cr-60) M.T. 55580.00
56 Geo grids Sq.Mt. 75.00
57 Geomembrane Sq.Mt. 103.00
58 Geonets Sq.Mt. 78.00
59 Geotextile Sq.Mt. 68.00
60 Geotextile filter fabric Sq.Mt. 63.00
61 LDO Ltr. 70.00
66 Pavement Marking Paint Ltr. 248.00
62 RCC Pipes 200 mm dia, 2.5 m long for drainage R.Mt. 414.00
63 Quarry spall Cum 660.00
64 Road Barricade Perforated fench No.
4035.00
(2000 x 1000 x 40 mm )
65 Road Barricade Sand Fillable only 1 mtr. No.
3378.00
[1000(L) x 350(W) x 760(H) mm ]
66
Road Furniture
1 Primer for Base Per liter 118.00
2 Road marking Paint as per IS 164 Per liter 160.00
3 Moulded Shank Raised Per No 158.00
Pavement Marker Road stud
4 Epoxy for Fixing stud Per liter 260.00
5 Median Marker Per No 250.00
6 Epoxy Adhesive Kit (Hardner, Epoxy, Quartz sand in 1:2:4) Per kit 962.50
7 Stoving paint Per liter 245.00
8 Protective Transperent Coat Per liter 748.25
9 Retroreflective Tape (Engg Gr.) Per Sq mtre 1050.00
10 Hot applied thermoplastic compound Per liter 210.00
11 Reflectorising glass beads Per kg 90.20
12 The aluminium-backed flexible prismatic (AFP) sheeting Per Sq mtre 6315.00
conforming to IRC 67 Type IV /ASTM D 4956-09 Type VI
specification laminated at the back with a 50 micron aluminium (Al)
foil with pressure sensitive adhesive
Page 543
Sr. Description Per Unit Rate (Excluding
No. GST) SSR 2022-
23
13 Delineator having wide angle cube corner micro prismatic 13 non Per Number 2200.00
metallic reflective sheeting confirming to Type XI of ASTM D4956-
09
14 Cost of approved type of delineators from ISI certified 14 firm as per Per Number 577.00
the standard drawing given in IRC - 79
15 Solar Raised Pavement Markers made of polycarbonate molded Per Number 2650.00
body with circular shape, solar powered, LED self illumination in
active mode, 360 degree illumination and reflective panels with
micro prismatic lens
16 Retroreflective Paint Tape Per Sq Cm 0.05
17 Epoxy primer Per liter 334.00
18 1.50mm aluminum sheet 18 confirming to IS 736-Material Per Sq mtre 1278.00
Designation 24345 or 1900
19 Retro reflective sheeting of Class B (Type IV High 19 intensity Per Sq mtre 2400.00
micro-prismatic grade sheeting-HIP) as per IRC:67- 2012 para 6.7
Page 544
LABOUR RATES FOR SSR FOR YEAR 2022-23
Page 545
Sr. No. Description Per Unit Rate
2022-23
56 Labour for Traffic Regulation Day 615.00
57 Watchman Day 615.00
58 Compressor Operator / Driver Day 677.00
59 Supervisor / Mate Day 677.00
60 Blacksmith (1st Class) Welder / Plumber / Electrician. Day 677.00
61 Blaster (Stone Cutter) Day 615.00
62 Mali Day 648.00
63 Mazdoor / Dresser (Semi Skilled) Day 648.00
64 Mazdoor / Dresser Sinker B116 Skilled Day 648.00
65 Medical Officer Day 2413.00
66 Operator (grouting) Day 677.00
67 Para Medical Personnel Day 1209.00
68 Mazdoor unskilled female (light) Day 648.00
69 Painting Lettering Number Day 648.00
70 Junior Engineer Day 1700.00
71 Surveyor Day 1172.00
72 Autocad Operator Day 1700.00
73 Attendent Day 615.00
74 Computer Typist Day 919.00
75 Tracer Day 1172.00
76 Total Station Operator Day 1700.00
77 Senior Engineer Day 2477.00
78 Assistant Day 919.00
79 Operator / Fitter Day 677.00
80 Mazdoor Unskilled Light Male Day 615.00
81 Computer Operator Day 1035.00
82 Survey Helper Day 615.00
83 Technician Day 2477.00
84 Skilled Assistants-on the site Day 677.00
85 Supervisor Day 1172.00
86 Valuation expert Day 2060.00
87 Office support Staff Day 615.00
88 Co-ordinator Day 1373.00
89 Senior Surveyor Day 1172.00
90 Revenue expert Day 1373.00
91 Welder Day 648.00
Page 546
(A) USAGE RATES OF PLANT AND MACHINERY FOR YEAR 2022-23
Sr.No. Description of Machine Unit Cap. Rate
1 2 3 4 5
A Earthmoving Machinery
1 Dozer D-8 H ( Heavy ) Hour 270 HP 3966.00
2 Dozer D 80 A 12 (Medium ) Hour 180 Hp 2762.00
3 Shantui Dozer D-3 B (Medium) Hour 65 HP 1439.00
4 Shantui Dozer SD13 Hour 130 HP 2358.00
5 Shantui Dozer SD16 Hour 160 HP 2835.00
6 BEML BD 80 Hour 180 HP 2700.00
7 Hydraulic Excavator (BEML BE 200, Tata Hitachi EX200 or Hour 0.9 Cum 2127.00
equivalent)
8 Hydraulic Excavator (BEML BE 200, Tata Hitachi EX200 or Day 0.9 Cum 17016.00
equivalent)
9 Excavator (JCB JS 80 ) Hour 0.9 Cum 1272.00
10 Excavator (JCB JS 80 ) Day 0.9 Cum 10176.00
11 Excavator ( Tata Hitachi EX100 ) Hour 0.6 Cum 1582.00
12 Excavator ( Tata Hitachi EX100 ) Day 0.6 Cum 12656.00
13 Excavator (JCB JS140/Tata Hitachi EX120 ) Can be used for Hour 0.6 Cum 1669.00
srapping
14 Excavator (JCB JS140/Tata Hitachi EX120) Day 0.6 Cum 13352.00
15 Hydraulic Excavator ( Tata Hitachi EX 350 ) Hour 1.7 Cum 3385.00
16 Hydraulic Excavator ( Tata Hitachi EX 350 ) Day 1.7 Cum 27080.00
17 Hydraulic Excavator (wheeled) Hour 0.3 Cum 1099.00
18 Hydraulic Excavator (wheeled) Day 0.3 Cum 8790.00
19 Loader 1.00 cum Bucket capacity Hour 1.00 Cum 1099.00
20 Loader 1.00 cum Bucket capacity Day 1.00 Cum 8970.00
21 Loader 2.0 cum bucket capacity Hour 2.0 Cum 2084.00
22 Loader 2.0 cum bucket capacity Day 2.0 Cum 16672.00
23 Motor grader 3.35 mtr Blade Hour 145 Hp 2021.00
24 Komatsu GD 605 A3 / BEML GD 605 R-2 Hour 2034.00
25 Tandem Vibratory Road Roller 8 MTe Hour 8 MT 2043.00
26 ACE Soil Compactor 10 T / Avelling Barford vib. Comp. Hour 10 MT 1197.00
27 DRR 8 / 10 MT Hour 8 MT 665.00
28 Static Road Roller 8 MT Hour 8 MT 785.00
29 Pneumatic Road Roller Hour 8 MT 1249.00
30 Manual roller (0.5 MT to 1 MT) Hour 0.5 MT to 1 MT 211.00
31 Manual roller (0.5 MT to 1 MT) Day 0.5 MT to 1 MT 1686.00
32 Tipper -10 cum Km. 10 Cum 77.00
33 Tipper -10 cum (20 Km/Hr) Hour 10 Cum 1540.00
34 Tipper -10 MT Km. 10 MT 49.00
35 Tipper -10 MT Hour 10 MT 988.00
36 Eicher Tipper 8.5 Cum Km. 8.5 Cum 76.00
37 Eicher Tipper 8.5 Cum Hour 8.5 Cum 1520.00
38 Tipper -7.5 MT Km. 7.5 MT 49.00
39 Tipper -7.5 MT Hour 7.5 MT 982.00
40 Tipper -6 cum Km. 6 Cum 55.00
41 Tipper -6 cum t.km 6 Cum 6.00
42 Tipper -6 cum (20 Km/Hr) Hour 6 Cum 1090.00
43 Tipper -3.5 cum Km. 3.5 Cum 49.00
44 Tipper TATA LPK 2518 BS III Km. 25 MT 75.00
45 Tipper TATA LPK 2518 BS III Hr 25 MT 1498.00
46 Tipper -3.5 cum (20 Km/Hr) Hour 3.5 Cum 973.00
47 Mahindra Blazo X 25 -25 MT Km. 25 MT 107.00
48 Mahindra Blazo X 25 -25 MT Hr 25 MT 2147.00
49 Mahindra Blazo 28 MT ( 2022 New Machine ) Km. 28 MT 111.00
50 Mahindra Blazo 28 MT ( 2022 New Machine ) Hr 28 MT 2221.00
51 Tractor Hour 35 HP 398.00
52 Tractor with rotevator Hour 35 HP 420.00
Page 547
Sr.No. Description of Machine Unit Cap. Rate
1 2 3 4 5
53 Tractor with Ripper Hour 35 HP 738.00
54 Water Tanker ( 9000 litr.) Hour 9000 Litr. 960.00
55 Water Tanker (15 km per Hour) Km. 9000 Litr. 63.00
56 Truck - 7.5 MT Km. 7.5 MT 51.00
57 Tata - 407 Km. 85 HP 31.00
Asphalt / Road Machinery
58 Air Compressor 175 cfm Hour 175 cfm 792.00
59 Air Compressor 260/250 cfm Hour 250 cfm 842.00
60 Air Compressor 400 cfm Hour 400 cfm 882.00
61 Air Compressor 510 cfm Hour 510 cfm 920.00
62 Bitumen Pressure Distributor (Spray Bar Width 4.5 Mtr.) Hour 4 to 9 KLtr. 1471.00
63 Bitumen Boiler oil fired Hour 2000 Ltr. 233.00
64 Emulsion Pressure Distrubutor Hour 4 to 9 KLtr. 1231.00
65 Hot Mix Plant 90-120 TPH capacity (Drum Mix Plant) with SCADA Hour 90 TPH 20475.00
66 Hot Mix Plant 60-90 TPH capacity (Drum Mix Plant) with SCADA Hour 60 TPH 17325.00
67 Hot Mix Plant 40-60 TPH capacity (Drum Mix Plant) with SCADA Hour 40 TPH 15750.00
Page 548
Sr.No. Description of Machine Unit Cap. Rate
1 2 3 4 5
102 Vibrator (Diesel) Day 1135.00
Other Allied Machinery
103 Crane (a) 80 MT Hour 80 MT 3065.00
104 Crane 40 MTe capacity Hour 40 MT 2718.00
105 Cloes Endurence 30 MT Hour 30 MT 2562.00
106 Cloes Hydra 830- 30 MT Hour 30 MT 2720.00
107 Voltas Omega -35 ( cap - 30 MT ) Hour 30 MT 2036.00
108 Crane 20 MT capacity Hour 20 MT 2299.00
109 Crane 15 MT capacity Hour 15 MT 2012.00
110 Crane 10 MT capacity Hour 10 MT 1135.00
111 Crane 5 MT capacity Hour 5 MT 668.00
112 Cranes (c) 3 MT Hour 3 MT 502.00
113 Tower Crane Hour
114 Generator 325 KVA Hour 325 KVA 2838.00
115 Generator 250 KVA Hour 250 KVA 2270.00
116 Generator (a) 125 KVA Hour 125 kva 1541.00
117 Generator (a) 100 KVA Hour 100 kva 1105.00
118 Generator (b) 63 KVA Hour 63 kva 704.00
119 Generator 33 KVA Hour 33 KVA 491.00
120 Generator 41 to 60 KVA Hour 41 to 60 kva 775.00
121 Generator 31 - 40 Kva Hour 31-40 Kva 561.00
122 Generator 10 to 20 Kva Hour 10 to 20 Kva 450.00
123 GSB Plant 50 cum Hour 50 Cum 2072.00
124 Kerb Casting Machine Hour 625.00
125 Piling Rig with BanMTite Pump Hour 5363.00
126 Ripper Hour 29.00
127 Rotavator Hour 23.00
128 Truck 5.5 cum per 10 MT Km. 10 MT 55.00
129 Truck 5.5 cum per 10 MT Hour 10 MT 1090.00
130 Truck 5.5 cum per 10 MT t.km 10 MT 6.00
131 Air Compressor with pneumatic chisel attachment for cutting hard Hour CFM 870.00
clay 400 CFM
132 Belt conveyor system Hour 142.00
133 Boat to carry atleast 20 persons Hour 625.00
134 Cold mining machine @ 20 cum per hour Hour 171.00
135 Compressor with guniting equipment along with accessories Hour CFM 831.00
260/250 CFM
136 Joint cutting machine with2-3 blades (for rigid pavement) Hour 954.00
137 Jack for lifting 40 MT capacity Day 40 MT 3405.00
138 Piling ring including double acting pile driving hammer (Hydraulic Hour 5363.00
ring)
139 Plate Compactor Hour 176.00
140 Texturing machine (for rigid pavement) Hour 165.00
141 Transporter Mac / Scamell (40 T) Km. 40 MT 99.00
142 Mahindra Transporter - 35 T ( 2016 ) Km. 35 MT 67.00
143 Mahindra Truxo 25 T 25 MT 63.00
144 Mack Euclid A.L. Beaver 20 MT Km. 20 MT 56.00
145 Truck Trailor 30 MT capacity Hour 30 MT 1292.00
146 Truck Trailor 30 MT capacity km 30 MT 3.00
147 Vibrating Pile driving hammer complite with power unit and Hour 5363.00
accessories
148 Pile boring machinary 325-400 mm dia. R.Mt 212.00
149 Pumping Charges Cmt 239.00
150 Pumping Set 2 to 9 HP Hour 2 to 9 HP 326.00
151 Pile Boaring Machine 325 to 400 mm Day 4665.00
152 Pile Boaring Machine 425 to 500 mm Day 4858.00
153 Pile Boaring Machine 525 to 600 mm Day 5405.00
Page 549
Sr.No. Description of Machine Unit Cap. Rate
1 2 3 4 5
154 Pile Boaring Machine 625 to 700 mm Day 6485.00
155 Pile Boaring Machine 725 to 1050 mm Day 7037.00
156 BenMTite Pump Day 86.00
157 Guiniting Gun Hour 294.00
158 Chain and pully Day 284.00
159 Welding machine Day 398.00
160 Diesel welding Plant 30 Hp Hour 30 HP 546.00
161 Electric drill machin Day 398.00
162 Electric gas cutting Day 279.00
163 Rammer Hour 178.00
164 Polishing machine with Polishman Day 919.00
165 Tile Cutting Machine Hour 37.00
166 Hand polishing with Polishman Day 692.00
167 TilePolishing machine(Grinder) Day 210.00
168 Bronto Sky Lift Bridge Inspection Unit Hour 3808.00
169 Hire Charges of Driver (Including All Taxes) Day 727.00
Page 550
STATEMENT - C (With Manual Loading)
(FOR YEAR 2022-2023) Maharashtra
Cost of Diesel (As on 01-04-2022) 102.88 Per Litre
Cost of mobile Oil ( As on 01-04-2022) 322 Per Litre
Labour Charges of mazdoor 615 Per Labour
Carrage of material over distance exceeding 0.50 km. including loading and unloading.
Lead in Av.Speed Factor No. of Trips Km done Qty of Cost of Qty of Cost of Cost of 6 Hire Total cost add 10% Gross Cost per
Km Km/Hrs Diesel= Diesel mobil oil mobil Mazdoor Charges Overhead Total of Trip=
4Km/Ltr in Ltr oil@322/ @673/lbr of Charges 12+13 (Col 14/4)
Ltr Truck@R
s. 2500
per day
N=8/((F*(L/S))+1) (2*NL)+6
L S F
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0.50 15.00 2.00 7.5 13.50 3.38 347.73 0.076 24.49 3690.00 2500.00 6562.22 656.22 7218.44 962.46
1.00 16.00 2.00 7.11 20.22 5.06 520.57 0.114 36.66 3690.00 2500.00 6747.23 674.72 7421.95 1043.87
1.50 16.50 2.00 6.77 26.31 6.58 676.95 0.148 47.67 3690.00 2500.00 6914.62 691.46 7606.08 1123.5
2.00 17.00 2.00 6.48 31.92 7.98 820.98 0.180 57.82 3690.00 2500.00 7068.80 706.88 7775.68 1199.95
2.50 17.25 2.00 6.20 37.00 9.25 951.64 0.208 67.02 3690.00 2500.00 7208.66 720.87 7929.53 1278.96
3.00 17.50 2.00 5.96 41.76 10.44 1074.07 0.235 75.64 3690.00 2500.00 7339.71 733.97 8073.68 1354.64
3.50 17.75 2.00 5.74 46.18 11.55 1188.26 0.260 83.68 3690.00 2500.00 7461.94 746.19 8208.13 1429.99
4.00 18.00 2.00 5.54 50.32 12.58 1294.23 0.283 91.14 3690.00 2500.00 7575.37 757.54 8332.91 1504.14
4.50 18.25 2.00 5.36 54.24 13.56 1395.05 0.305 98.24 3690.00 2500.00 7683.29 768.33 8451.62 1576.79
5.00 18.50 2.00 5.19 57.90 14.48 1489.70 0.326 104.91 3690.00 2500.00 7784.61 778.46 8563.07 1649.92
5.50 18.50 2.00 5.02 61.22 15.31 1575.09 0.344 110.92 3690.00 2500.00 7876.01 787.60 8663.61 1725.82
6.00 18.75 2.00 4.88 64.56 16.14 1660.48 0.363 116.93 3690.00 2500.00 7967.41 796.74 8764.15 1795.93
6.50 18.85 2.00 4.73 67.49 16.87 1735.59 0.380 122.22 3690.00 2500.00 8047.81 804.78 8852.59 1871.58
7.00 19.00 2.00 4.61 70.54 17.64 1814.80 0.397 127.80 3690.00 2500.00 8132.60 813.26 8945.86 1940.53
7.50 19.15 2.00 4.49 73.35 18.34 1886.82 0.413 132.87 3690.00 2500.00 8209.69 820.97 9030.66 2011.28
8.00 19.30 2.00 4.37 75.92 18.98 1952.66 0.427 137.51 3690.00 2500.00 8280.17 828.02 9108.19 2084.25
8.50 19.45 2.00 4.27 78.59 19.65 2021.59 0.442 142.36 3690.00 2500.00 8353.95 835.40 9189.35 2152.07
9.00 19.60 2.00 4.17 81.06 20.27 2085.38 0.456 146.86 3690.00 2500.00 8422.24 842.22 9264.46 2221.69
9.50 19.80 2.00 4.08 83.52 20.88 2148.13 0.470 151.28 3690.00 2500.00 8489.41 848.94 9338.35 2288.81
10.00 20.00 2.00 4.00 86.00 21.50 2211.92 0.484 155.77 3690.00 2500.00 8557.69 855.77 9413.46 2353.37
Page 551
Lead in Av.Speed Factor No. of Trips Km done Qty of Cost of Qty of Cost of Cost of 6 Hire Total cost add 10% Gross Cost per
Km Km/Hrs Diesel= Diesel mobil oil mobil Mazdoor Charges Overhead Total of Trip=
4Km/Ltr in Ltr oil@322/ @673/lbr of Charges 12+13 (Col 14/4)
Ltr Truck@R
s. 2500
per day
N=8/((F*(L/S))+1) (2*NL)+6
L S F
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
11.00 21.00 2.00 3.91 92.02 23.01 2367.27 0.518 166.71 3690.00 2500.00 8723.98 872.40 9596.38 2454.32
12.00 22.00 2.00 3.83 97.92 24.48 2518.50 0.551 177.36 3690.00 2500.00 8885.86 888.59 9774.45 2552.08
13.00 23.00 2.00 3.76 103.76 25.94 2668.71 0.584 187.94 3690.00 2500.00 9046.65 904.67 9951.32 2646.63
14.00 24.00 2.00 3.69 109.32 27.33 2811.71 0.615 198.01 3690.00 2500.00 9199.72 919.97 10119.69 2742.46
15.00 25.00 2.00 3.64 115.20 28.80 2962.94 0.648 208.66 3690.00 2500.00 9361.60 936.16 10297.76 2829.05
20.00 25.00 2.00 3.08 129.20 32.30 3323.02 0.727 234.01 3690.00 2500.00 9747.03 974.70 10721.73 3481.08
25.00 25.00 2.00 2.67 139.50 34.88 3588.45 0.785 252.71 3690.00 2500.00 10031.16 1003.12 11034.28 4132.69
30.00 30.00 2.00 2.67 166.20 41.55 4274.66 0.935 301.03 3690.00 2500.00 10765.69 1076.57 11842.26 4435.3
35.00 30.00 2.00 2.40 174.00 43.50 4475.28 0.979 315.16 3690.00 2500.00 10980.44 1098.04 12078.48 5032.7
40.00 30.00 2.00 2.18 180.40 45.10 4639.89 1.015 326.75 3690.00 2500.00 11156.64 1115.66 12272.30 5629.50
45.00 30.00 2.00 2.00 186.00 46.50 4783.92 1.046 336.89 3690.00 2500.00 11310.81 1131.08 12441.89 6220.95
50.00 30.00 1.75 2.04 210.00 52.50 5401.20 1.181 380.36 3690.00 2500.00 11971.56 1197.16 13168.72 6455.25
60.00 35.00 1.75 2.00 246.00 61.50 6327.12 1.384 445.57 3690.00 2500.00 12962.69 1296.27 14258.96 7129.48
70.00 35.00 1.75 1.78 255.20 63.80 6563.74 1.436 462.23 3690.00 2500.00 13215.97 1321.60 14537.57 8167.17
80.00 35.00 1.75 1.60 262.00 65.50 6738.64 1.474 474.55 3690.00 2500.00 13403.19 1340.32 14743.51 9214.69
90.00 35.00 1.75 1.45 267.00 66.75 6867.24 1.502 483.60 3690.00 2500.00 13540.84 1354.08 14894.92 10272.36
100.00 35.00 1.75 1.33 272.00 68.00 6995.84 1.530 492.66 3690.00 2500.00 13678.50 1367.85 15046.35 11313.05
125.00 40.00 1.50 1.41 358.50 89.63 9221.13 2.017 649.37 3690.00 2500.00 16060.50 1606.05 17666.55 12529.47
150.00 40.00 1.50 1.21 369.00 92.25 9490.68 2.076 668.35 3690.00 2500.00 16349.03 1634.90 17983.93 14862.75
175.00 40.00 1.25 1.24 440.00 110.00 11316.80 2.475 796.95 3690.00 2500.00 18303.75 1830.38 20134.13 16237.2
200.00 40.00 1.25 1.1 446.00 111.50 11471.12 2.509 807.82 3690.00 2500.00 18468.94 1846.89 20315.83 18468.94
250.00 40.00 1.25 0.91 461.00 115.25 11856.92 2.593 834.99 3690.00 2500.00 18881.91 1888.19 20770.10 22824.29
300.00 40.00 1.25 0.77 468.00 117.00 12036.96 2.633 847.67 3690.00 2500.00 19074.63 1907.46 20982.09 27249.47
350.00 40.00 1.25 0.67 475.00 118.75 12217.00 2.672 860.34 3690.00 2500.00 19267.34 1926.73 21194.07 31632.94
400.00 40.00 1.25 0.59 478.00 119.50 12294.16 2.689 865.78 3690.00 2500.00 19349.94 1934.99 21284.93 36076.15
500.00 40.00 1.25 0.48 486.00 121.50 12499.92 2.734 880.27 3690.00 2500.00 19570.19 1957.02 21527.21 44848.35
Page 552
Lead in Av.Speed Factor No. of Trips Km done Qty of Cost of Qty of Cost of Cost of 6 Hire Total cost add 10% Gross Cost per
Km Km/Hrs Diesel= Diesel mobil oil mobil Mazdoor Charges Overhead Total of Trip=
4Km/Ltr in Ltr oil@322/ @673/lbr of Charges 12+13 (Col 14/4)
Ltr Truck@R
s. 2500
per day
N=8/((F*(L/S))+1) (2*NL)+6
L S F
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
600.00 40.00 1.25 0.41 498.00 124.50 12808.56 2.801 902.00 3690.00 2500.00 19900.56 1990.06 21890.62 53391.76
700.00 40.00 1.25 0.35 496.00 124.00 12757.12 2.790 898.38 3690.00 2500.00 19845.50 1984.55 21830.05 62371.57
800.00 40.00 1.25 0.31 498.31 124.58 12816.79 2.803 902.58 3690.00 2500.00 19909.37 1990.94 21900.31 71176.01
900.00 40.00 1.25 0.27 500.42 125.11 12871.32 2.815 906.42 3690.00 2500.00 19967.74 1996.77 21964.51 79964.54
1000.00 40.00 1.25 0.25 502.12 125.53 12914.53 2.824 909.46 3690.00 2500.00 20013.99 2001.40 22015.39 88749.54
Page 553
STATEMENT - C 1 (With Manual Loading)
For 2022-2023 Maharashtra
Cost of Diesel (As on 01-04-2022) 102.88 Per Litre
Cost of mobile Oil ( As on 01-04-2022) 322 Per Litre
Labour Charges of mazdoor 615 Per Labour
Page 554
Lead in km Cost Per Fuel
Trip Lead Componant ConcreteBlock (FORM) Cement, Lime, Stone Bricks Tiles Half Round Tiles Steel (MS, TMT, Flooring Tiles
Charges Block, GI, CI, CC & /Roofing Tiles/Manlore H.Y.S.D.) Structural Ceramic/ Marbonate
AC Pipes / Sheet& Tiles Steel
Plate, Glass in packs,
Distemper, AC Sheet,
Fitting Iron Sheet
Page 555
Lead in km Cost Per Fuel
Trip Lead Componant ConcreteBlock (FORM) Cement, Lime, Stone Bricks Tiles Half Round Tiles Steel (MS, TMT, Flooring Tiles
Charges Block, GI, CI, CC & /Roofing Tiles/Manlore H.Y.S.D.) Structural Ceramic/ Marbonate
AC Pipes / Sheet& Tiles Steel
Plate, Glass in packs,
Distemper, AC Sheet,
Fitting Iron Sheet
Page 556
STATEMENT - C (With Machine Loading)
(FOR YEAR 2022-2023) Maharashtra
Cost of Diesel (As on 01-04-2022) 102.88 Per Litre
Cost of mobile Oil ( As on 01-04-2022) 322 Per Litre
Hire charges of Loader 646 Per trip (Rate of Loader Rs.968/- per Hr. with 85% bucket effi., Cycle time 6 minutes)
Carrage of material over distance exceeding 0.50 km. including loading and unloading.
Lead in Av.Speed Factor No. of Km done Qty of Cost of Qty of Cost of Hire Charges Total cost add 10% Gross Cost per Cost of
Km Km/Hrs Trips Diesel= Diesel mobile oil mobile oil of Truck @ Overhead Total of Trip = loader per
4Km/Ltr in Ltr @322/Ltr Rs. 2500 per Charges 11+12 ( Col 13/4) trip of
Day tipper
L S F N=8/((F*(L/S (2*NL)+6
))+1)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0.50 15.00 2.00 7.50 13.50 3.38 347.73 0.076 24.49 2500.00 2872.22 287.22 3159.44 421.26 646.00
1.00 16.00 2.00 7.11 20.22 5.06 520.57 0.114 36.66 2500.00 3057.23 305.72 3362.95 472.91 646.00
1.50 16.50 2.00 6.77 26.31 6.58 676.95 0.148 47.67 2500.00 3224.62 322.46 3547.08 524.00 646.00
2.00 17.00 2.00 6.48 31.90 7.98 820.98 0.180 57.82 2500.00 3378.80 337.88 3716.68 573.90 646.00
2.50 17.25 2.00 6.20 37.01 9.25 951.64 0.208 67.02 2500.00 3518.66 351.87 3870.53 624.05 646.00
3.00 17.50 2.00 5.96 41.74 10.44 1074.07 0.235 75.64 2500.00 3649.71 364.97 4014.68 673.89 646.00
3.50 17.75 2.00 5.74 46.16 11.54 1187.24 0.260 83.61 2500.00 3770.85 377.09 4147.94 722.97 646.00
4.00 18.00 2.00 5.54 50.31 12.58 1294.23 0.283 91.14 2500.00 3885.37 388.54 4273.91 771.68 646.00
4.50 18.25 2.00 5.36 54.22 13.56 1395.05 0.305 98.24 2500.00 3993.29 399.33 4392.62 819.86 646.00
5.00 18.50 2.00 5.19 57.93 14.48 1489.70 0.326 104.91 2500.00 4094.61 409.46 4504.07 867.34 646.00
5.50 18.50 2.00 5.02 61.19 15.30 1574.06 0.344 110.85 2500.00 4184.91 418.49 4603.40 917.57 646.00
6.00 18.75 2.00 4.88 64.54 16.13 1659.45 0.363 116.86 2500.00 4276.31 427.63 4703.94 964.31 646.00
6.50 18.85 2.00 4.73 67.55 16.89 1737.64 0.380 122.37 2500.00 4360.01 436.00 4796.01 1012.95 646.00
7.00 19.00 2.00 4.61 70.48 17.62 1812.75 0.396 127.66 2500.00 4440.41 444.04 4884.45 1060.44 646.00
7.50 19.15 2.00 4.49 73.29 18.32 1884.76 0.412 132.73 2500.00 4517.49 451.75 4969.24 1107.70 646.00
8.00 19.30 2.00 4.37 75.98 19.00 1954.72 0.428 137.66 2500.00 4592.38 459.24 5051.62 1154.94 646.00
8.50 19.45 2.00 4.27 78.57 19.64 2020.56 0.442 142.29 2500.00 4662.85 466.29 5129.14 1201.52 646.00
9.00 19.60 2.00 4.17 81.06 20.27 2085.38 0.456 146.86 2500.00 4732.24 473.22 5205.46 1248.25 646.00
9.50 19.80 2.00 4.08 83.57 20.89 2149.16 0.470 151.35 2500.00 4800.51 480.05 5280.56 1293.47 646.00
10.00 20.00 2.00 4.00 86.00 21.50 2211.92 0.484 155.77 2500.00 4867.69 486.77 5354.46 1338.62 646.00
11.00 21.00 2.00 3.91 91.95 22.99 2365.21 0.517 166.56 2500.00 5031.77 503.18 5534.95 1416.68 646.00
12.00 22.00 2.00 3.83 97.83 24.46 2516.44 0.550 177.21 2500.00 5193.65 519.37 5713.02 1493.18 646.00
13.00 23.00 2.00 3.76 103.63 25.91 2665.62 0.583 187.72 2500.00 5353.34 535.33 5888.67 1568.18 646.00
Page 557
Lead in Av.Speed Factor No. of Km done Qty of Cost of Qty of Cost of Hire Charges Total cost add 10% Gross Cost per Cost of
Km Km/Hrs Trips Diesel= Diesel mobile oil mobile oil of Truck @ Overhead Total of Trip = loader per
4Km/Ltr in Ltr @322/Ltr Rs. 2500 per Charges 11+12 ( Col 13/4) trip of
Day tipper
L S F N=8/((F*(L/S (2*NL)+6
))+1)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
14.00 24.00 2.00 3.69 109.38 27.35 2813.77 0.615 198.15 2500.00 5511.92 551.19 6063.11 1642.09 646.00
15.00 25.00 2.00 3.64 115.09 28.77 2959.86 0.647 208.44 2500.00 5668.30 566.83 6235.13 1714.66 646.00
20.00 25.00 2.00 3.08 129.08 32.27 3319.94 0.726 233.80 2500.00 6053.74 605.37 6659.11 2164.21 646.00
25.00 25.00 2.00 2.67 139.33 34.83 3583.31 0.784 252.34 2500.00 6335.65 633.57 6969.22 2613.46 646.00
30.00 30.00 2.00 2.67 166.00 41.50 4269.52 0.934 300.67 2500.00 7070.19 707.02 7777.21 2916.45 646.00
35.00 30.00 2.00 2.40 174.00 43.50 4475.28 0.979 315.16 2500.00 7290.44 729.04 8019.48 3341.45 646.00
40.00 30.00 2.00 2.18 180.55 45.14 4644.00 1.016 327.04 2500.00 7471.04 747.10 8218.14 3766.65 646.00
45.00 30.00 2.00 2.00 186.00 46.50 4783.92 1.046 336.89 2500.00 7620.81 762.08 8382.89 4191.45 646.00
50.00 30.00 1.75 2.04 210.26 52.56 5407.37 1.183 380.80 2500.00 8288.17 828.82 9116.99 4463.53 646.00
60.00 35.00 1.75 2.00 246.00 61.50 6327.12 1.384 445.57 2500.00 9272.69 927.27 10199.96 5099.98 646.00
70.00 35.00 1.75 1.78 254.89 63.72 6555.51 1.434 461.65 2500.00 9517.16 951.72 10468.88 5888.75 646.00
80.00 35.00 1.75 1.60 262.00 65.50 6738.64 1.474 474.55 2500.00 9713.19 971.32 10684.51 6677.82 646.00
90.00 35.00 1.75 1.45 267.82 66.95 6887.82 1.506 485.05 2500.00 9872.87 987.29 10860.16 7466.36 646.00
100.00 35.00 1.75 1.33 272.67 68.17 7013.33 1.534 493.89 2500.00 10007.22 1000.72 11007.94 8255.96 646.00
125.00 40.00 1.50 1.41 357.65 89.41 9198.50 2.012 647.78 2500.00 12346.28 1234.63 13580.91 9655.18 646.00
150.00 40.00 1.50 1.21 368.26 92.07 9472.16 2.072 667.05 2500.00 12639.21 1263.92 13903.13 11513.53 646.00
175.00 40.00 1.25 1.24 438.85 109.71 11286.96 2.468 794.85 2500.00 14581.81 1458.18 16039.99 12969.84 646.00
200.00 40.00 1.25 1.10 447.38 111.84 11506.10 2.516 810.28 2500.00 14816.38 1481.64 16298.02 14770.08 646.00
250.00 40.00 1.25 0.91 459.90 114.98 11829.14 2.587 833.03 2500.00 15162.17 1516.22 16678.39 18372.29 646.00
300.00 40.00 1.25 0.77 468.65 117.16 12053.42 2.636 848.82 2500.00 15402.24 1540.22 16942.46 21972.25 646.00
350.00 40.00 1.25 0.67 475.11 118.78 12220.09 2.673 860.56 2500.00 15580.65 1558.07 17138.72 25574.18 646.00
400.00 40.00 1.25 0.59 480.07 120.02 12347.66 2.700 869.54 2500.00 15717.20 1571.72 17288.92 29175.05 646.00
500.00 40.00 1.25 0.48 487.20 121.80 12530.78 2.741 882.44 2500.00 15913.22 1591.32 17504.54 36376.62 646.00
600.00 40.00 1.25 0.41 492.08 123.02 12656.30 2.768 891.28 2500.00 16047.58 1604.76 17652.34 43579.21 646.00
700.00 40.00 1.25 0.35 495.62 123.90 12746.83 2.788 897.66 2500.00 16144.49 1614.45 17758.94 50779.47 646.00
800.00 40.00 1.25 0.31 498.31 124.58 12816.79 2.803 902.58 2500.00 16219.37 1621.94 17841.31 57984.26 646.00
900.00 40.00 1.25 0.27 500.42 125.11 12871.32 2.815 906.42 2500.00 16277.74 1627.77 17905.51 65187.25 646.00
1000.00 40.00 1.25 0.25 502.12 125.53 12914.53 2.824 909.46 2500.00 16323.99 1632.40 17956.39 72386.70 646.00
Page 558
STATEMENT - C 1 (With Machine Loading)
(FOR YEAR 2022-2023) Maharashtra
Cost of Diesel (As on 01-04-2022) 102.88 Per Litre
Cost of mobile Oil ( As on 01-04-2022) 322 Per Litre
Hire charges of Loader 646 Per trip (Rate of Loader Rs.968/- per Hr. with 85% bucket effi., Cycle time 6 minutes)
Carrage of material over distance exceeding 0.50 km. including loading and unloading.
Lead in Total Cost Per Fuel
km Trip Lead Componant
Charges Murrum, Building Manure Sludge Excavated Rock Sand, Stone below 40 mm, Stone aggregate 40mm
(Including Rubish, Earth soling stone Normal Brick sider aggre. Normal size and above
lodar) Timber
Unit Cum Unit Cum Unit Cum Unit Cum Unit Cum
L.F. Fuel L.F. Fuel L.F. Fuel L.F. Fuel Comp. L.F. Fuel Comp.
6.00 Comp. 5.45 Comp. 4.70 Comp. 5.75 6.00
0.50 1067.26 54.59 177.88 9.10 195.83 10.02 227.08 11.61 185.61 9.49 177.88 9.10
1.00 1118.91 86.21 186.49 14.37 205.30 15.82 238.07 18.34 194.59 14.99 186.49 14.37
1.50 1170.00 117.74 195.00 19.62 214.68 21.60 248.94 25.05 203.48 20.48 195.00 19.62
2.00 1219.90 149.18 203.32 24.86 223.83 27.37 259.55 31.74 212.16 25.94 203.32 24.86
2.50 1270.05 180.73 211.68 30.12 233.04 33.16 270.22 38.45 220.88 31.43 211.68 30.12
3.00 1319.89 212.19 219.98 35.37 242.18 38.93 280.83 45.15 229.55 36.90 219.98 35.37
3.50 1368.97 243.75 228.16 40.63 251.19 44.72 291.27 51.86 238.08 42.39 228.16 40.63
4.00 1417.68 275.07 236.28 45.85 260.12 50.47 301.63 58.53 246.55 47.84 236.28 45.85
4.50 1465.86 306.46 244.31 51.08 268.97 56.23 311.89 65.20 254.93 53.30 244.31 51.08
5.00 1513.34 337.97 252.22 56.33 277.68 62.01 321.99 71.91 263.19 58.78 252.22 56.33
5.50 1563.57 369.45 260.60 61.58 286.89 67.79 332.67 78.61 271.93 64.25 260.60 61.58
6.00 1610.31 400.65 268.39 66.78 295.47 73.51 342.62 85.24 280.05 69.68 268.39 66.78
6.50 1658.95 432.05 276.49 72.01 304.39 79.28 352.97 91.93 288.51 75.14 276.49 72.01
7.00 1706.44 463.53 284.41 77.26 313.11 85.05 363.07 98.62 296.77 80.61 284.41 77.26
7.50 1753.70 494.80 292.28 82.47 321.78 90.79 373.13 105.28 304.99 86.05 292.28 82.47
8.00 1800.94 526.13 300.16 87.69 330.45 96.54 383.18 111.94 313.21 91.50 300.16 87.69
8.50 1847.52 557.46 307.92 92.91 338.99 102.29 393.09 118.61 321.31 96.95 307.92 92.91
9.00 1894.25 588.84 315.71 98.14 347.57 108.04 403.03 125.29 329.43 102.41 315.71 98.14
9.50 1939.47 619.94 323.25 103.32 355.87 113.75 412.65 131.90 337.30 107.82 323.25 103.32
10.00 1984.62 651.11 330.77 108.52 364.15 119.47 422.26 138.53 345.15 113.24 330.77 108.52
11.00 2062.68 712.88 343.78 118.81 378.47 130.80 438.87 151.68 358.73 123.98 343.78 118.81
12.00 2139.18 774.27 356.53 129.05 392.51 142.07 455.14 164.74 372.03 134.66 356.53 129.05
Page 559
Lead in Total Cost Per Fuel
km Trip Lead Componant
Charges Murrum, Building Manure Sludge Excavated Rock Sand, Stone below 40 mm, Stone aggregate 40mm
(Including Rubish, Earth soling stone Normal Brick sider aggre. Normal size and above
lodar) Timber
Unit Cum Unit Cum Unit Cum Unit Cum Unit Cum
L.F. Fuel L.F. Fuel L.F. Fuel L.F. Fuel Comp. L.F. Fuel Comp.
6.00 Comp. 5.45 Comp. 4.70 Comp. 5.75 6.00
13.00 2214.18 835.72 369.03 139.29 406.27 153.34 471.10 177.81 385.07 145.34 369.03 139.29
14.00 2288.09 897.21 381.35 149.54 419.83 164.63 486.83 190.90 397.93 156.04 381.35 149.54
15.00 2360.66 958.45 393.44 159.74 433.15 175.86 502.27 203.93 410.55 166.69 393.44 159.74
20.00 2810.21 1270.37 468.37 211.73 515.63 233.10 597.92 270.29 488.73 220.93 468.37 211.73
25.00 3259.46 1582.50 543.24 263.75 598.07 290.37 693.50 336.70 566.86 275.22 543.24 263.75
30.00 3562.45 1885.12 593.74 314.19 653.66 345.89 757.97 401.09 619.56 327.85 593.74 314.19
35.00 3987.45 2195.62 664.58 365.94 731.64 402.87 848.39 467.15 693.47 381.85 664.58 365.94
40.00 4412.65 2506.10 735.44 417.68 809.66 459.83 938.86 533.21 767.42 435.84 735.44 417.68
45.00 4837.45 2816.45 806.24 469.41 887.61 516.78 1029.24 599.24 841.30 489.82 806.24 469.41
50.00 5109.53 3117.51 851.59 519.59 937.53 572.02 1087.13 663.30 888.61 542.18 851.59 519.59
60.00 5745.98 3724.98 957.66 620.83 1054.31 683.48 1222.55 792.55 999.30 647.82 957.66 620.83
70.00 6534.75 4341.89 1089.13 723.65 1199.04 796.68 1390.37 923.81 1136.48 755.11 1089.13 723.65
80.00 7323.82 4959.07 1220.64 826.51 1343.82 909.92 1558.26 1055.12 1273.71 862.45 1220.64 826.51
90.00 8112.36 5576.50 1352.06 929.42 1488.51 1023.21 1726.03 1186.49 1410.85 969.83 1352.06 929.42
100.00 8901.96 6193.50 1483.66 1032.25 1633.39 1136.42 1894.03 1317.77 1548.17 1077.13 1483.66 1032.25
125.00 10301.18 7700.39 1716.86 1283.40 1890.12 1412.92 2191.74 1638.38 1791.51 1339.20 1716.86 1283.40
150.00 12159.53 9235.48 2026.59 1539.25 2231.11 1694.58 2587.13 1965.00 2114.70 1606.17 2026.59 1539.25
175.00 13615.84 10746.07 2269.31 1791.01 2498.32 1971.76 2896.99 2286.40 2367.97 1868.88 2269.31 1791.01
200.00 15416.08 12278.94 2569.35 2046.49 2828.64 2253.02 3280.02 2612.54 2681.06 2135.47 2569.35 2046.49
250.00 19018.29 15341.87 3169.72 2556.98 3489.59 2815.02 4046.44 3264.23 3307.53 2668.15 3169.72 2556.98
300.00 22618.25 18406.61 3769.71 3067.77 4150.14 3377.36 4812.39 3916.30 3933.61 3201.15 3769.71 3067.77
350.00 26220.18 21470.26 4370.03 3578.38 4811.04 3939.50 5578.76 4568.14 4560.03 3733.96 4370.03 3578.38
400.00 29821.05 24535.48 4970.18 4089.25 5471.75 4501.92 6344.90 5220.31 5186.27 4267.04 4970.18 4089.25
500.00 37022.62 30662.94 6170.44 5110.49 6793.14 5626.23 7877.15 6524.03 6438.72 5332.69 6170.44 5110.49
Page 560
STATEMENT - C 1 ( Pipes)
(FOR YEAR 2022-2023) Maharashtra
Cost of Diesel (As on 01-04-2022) 102.88 Per Litre
Cost of mobile Oil ( As on 01-04-2022) 322 Per Litre
Hire charges of Loader 646 Per trip
Hire charges of Truck 2500 Per Day
Lead in Total Cost Per Fuel Lead Charges for NP-2 Class Pipes
km Trip Lead Componant
Charges 100 mm 150 mm 225 mm 300 mm 450 mm
(Including
lodar)
Rgm Rgm Rgm Rgm Rgm
L.F. Fuel Fuel L.F. Fuel L.F. Fuel L.F. Fuel
208.00 Comp. 156 Comp. 114.00 Comp. 87.50 Comp. 62.50 Comp.
0.50 1067.26 54.59 5.13 0.26 6.84 0.35 9.36 0.48 12.20 0.62 17.08 0.87
1.00 1118.91 86.21 5.38 0.41 7.17 0.55 9.82 0.76 12.79 0.99 17.90 1.38
1.50 1170.00 117.74 5.63 0.57 7.50 0.75 10.26 1.03 13.37 1.35 18.72 1.88
2.00 1219.90 149.18 5.86 0.72 7.82 0.96 10.70 1.31 13.94 1.70 19.52 2.39
2.50 1270.05 180.73 6.11 0.87 8.14 1.16 11.14 1.59 14.51 2.07 20.32 2.89
3.00 1319.89 212.19 6.35 1.02 8.46 1.36 11.58 1.86 15.08 2.43 21.12 3.40
3.50 1368.97 243.75 6.58 1.17 8.78 1.56 12.01 2.14 15.65 2.79 21.90 3.90
4.00 1417.68 275.07 6.82 1.32 9.09 1.76 12.44 2.41 16.20 3.14 22.68 4.40
4.50 1465.86 306.46 7.05 1.47 9.40 1.96 12.86 2.69 16.75 3.50 23.45 4.90
5.00 1513.34 337.97 7.28 1.62 9.70 2.17 13.27 2.96 17.30 3.86 24.21 5.41
5.50 1563.57 369.45 7.52 1.78 10.02 2.37 13.72 3.24 17.87 4.22 25.02 5.91
6.00 1610.31 400.65 7.74 1.93 10.32 2.57 14.13 3.51 18.40 4.58 25.76 6.41
6.50 1658.95 432.05 7.98 2.08 10.63 2.77 14.55 3.79 18.96 4.94 26.54 6.91
7.00 1706.44 463.53 8.20 2.23 10.94 2.97 14.97 4.07 19.50 5.30 27.30 7.42
7.50 1753.70 494.80 8.43 2.38 11.24 3.17 15.38 4.34 20.04 5.65 28.06 7.92
8.00 1800.94 526.13 8.66 2.53 11.54 3.37 15.80 4.62 20.58 6.01 28.82 8.42
8.50 1847.52 557.46 8.88 2.68 11.84 3.57 16.21 4.89 21.11 6.37 29.56 8.92
9.00 1894.25 588.84 9.11 2.83 12.14 3.77 16.62 5.17 21.65 6.73 30.31 9.42
9.50 1939.47 619.94 9.32 2.98 12.43 3.97 17.01 5.44 22.17 7.09 31.03 9.92
10.00 1984.62 651.11 9.54 3.13 12.72 4.17 17.41 5.71 22.68 7.44 31.75 10.42
11.00 2062.68 712.88 9.92 3.43 13.22 4.57 18.09 6.25 23.57 8.15 33.00 11.41
12.00 2139.18 774.27 10.28 3.72 13.71 4.96 18.76 6.79 24.45 8.85 34.23 12.39
Page 561
Cost of Diesel (As on 01-04-2022) 102.88 Per Litre
Cost of mobile Oil ( As on 01-04-2022) 322 Per Litre
Hire charges of Loader 646 Per trip
Hire charges of Truck 2500 Per Day
Lead in Total Cost Per Fuel Lead Charges for NP-2 Class Pipes
km Trip Lead Componant
Charges 100 mm 150 mm 225 mm 300 mm 450 mm
(Including
lodar)
Rgm Rgm Rgm Rgm Rgm
L.F. Fuel Fuel L.F. Fuel L.F. Fuel L.F. Fuel
208.00 Comp. 156 Comp. 114.00 Comp. 87.50 Comp. 62.50 Comp.
13.00 2214.18 835.72 10.65 4.02 14.19 5.36 19.42 7.33 25.30 9.55 35.43 13.37
14.00 2288.09 897.21 11.00 4.31 14.67 5.75 20.07 7.87 26.15 10.25 36.61 14.36
15.00 2360.66 958.45 11.35 4.61 15.13 6.14 20.71 8.41 26.98 10.95 37.77 15.34
20.00 2810.21 1270.37 13.51 6.11 18.01 8.14 24.65 11.14 32.12 14.52 44.96 20.33
25.00 3259.46 1582.50 15.67 7.61 20.89 10.14 28.59 13.88 37.25 18.09 52.15 25.32
30.00 3562.45 1885.12 17.13 9.06 22.84 12.08 31.25 16.54 40.71 21.54 57.00 30.16
35.00 3987.45 2195.62 19.17 10.56 25.56 14.07 34.98 19.26 45.57 25.09 63.80 35.13
40.00 4412.65 2506.10 21.21 12.05 28.29 16.06 38.71 21.98 50.43 28.64 70.60 40.10
45.00 4837.45 2816.45 23.26 13.54 31.01 18.05 42.43 24.71 55.29 32.19 77.40 45.06
50.00 5109.53 3117.51 24.57 14.99 32.75 19.98 44.82 27.35 58.39 35.63 81.75 49.88
60.00 5745.98 3724.98 27.62 17.91 36.83 23.88 50.40 32.68 65.67 42.57 91.94 59.60
70.00 6534.75 4341.89 31.42 20.87 41.89 27.83 57.32 38.09 74.68 49.62 104.56 69.47
80.00 7323.82 4959.07 35.21 23.84 46.95 31.79 64.24 43.50 83.70 56.68 117.18 79.35
90.00 8112.36 5576.50 39.00 26.81 52.00 35.75 71.16 48.92 92.71 63.73 129.80 89.22
100.00 8901.96 6193.50 42.80 29.78 57.06 39.70 78.09 54.33 101.74 70.78 142.43 99.10
125.00 10301.18 7700.39 49.52 37.02 66.03 49.36 90.36 67.55 117.73 88.00 164.82 123.21
150.00 12159.53 9235.48 58.46 44.40 77.95 59.20 106.66 81.01 138.97 105.55 194.55 147.77
175.00 13615.84 10746.07 65.46 51.66 87.28 68.89 119.44 94.26 155.61 122.81 217.85 171.94
200.00 15416.08 12278.94 74.12 59.03 98.82 78.71 135.23 107.71 176.18 140.33 246.66 196.46
Page 562
STATEMENT - C 1 ( Pipes)
(FOR YEAR 2022-2023) Maharashtra
Cost of Diesel (As on 01-04-2022) 102.88 Per Litre
Cost of mobile Oil ( As on 01-04-2022) 322 Per Litre
Hire charges of Loader 646 Per trip
Hire charges of Truck 2500 Per Day
Lead in Total Cost Per Fuel Componant Lead Charges for NP-3 Class Pipes
km Trip Lead
Charges 300 mm 450 mm 600 mm 800 mm 900mm
(Including
lodar)
0.50 1067.26 54.59 14.23 0.73 32.84 1.68 47.43 2.43 71.15 3.64 85.38 4.37
1.00 1118.91 86.21 14.92 1.15 34.43 2.65 49.73 3.83 74.59 5.75 89.51 6.90
1.50 1170.00 117.74 15.60 1.57 36.00 3.62 52.00 5.23 78.00 7.85 93.60 9.42
2.00 1219.90 149.18 16.27 1.99 37.54 4.59 54.22 6.63 81.33 9.95 97.59 11.93
2.50 1270.05 180.73 16.93 2.41 39.08 5.56 56.45 8.03 84.67 12.05 101.60 14.46
3.00 1319.89 212.19 17.60 2.83 40.61 6.53 58.66 9.43 87.99 14.15 105.59 16.98
3.50 1368.97 243.75 18.25 3.25 42.12 7.50 60.84 10.83 91.26 16.25 109.52 19.50
4.00 1417.68 275.07 18.90 3.67 43.62 8.46 63.01 12.23 94.51 18.34 113.41 22.01
4.50 1465.86 306.46 19.54 4.09 45.10 9.43 65.15 13.62 97.72 20.43 117.27 24.52
5.00 1513.34 337.97 20.18 4.51 46.56 10.40 67.26 15.02 100.89 22.53 121.07 27.04
5.50 1563.57 369.45 20.85 4.93 48.11 11.37 69.49 16.42 104.24 24.63 125.09 29.56
6.00 1610.31 400.65 21.47 5.34 49.55 12.33 71.57 17.81 107.35 26.71 128.82 32.05
6.50 1658.95 432.05 22.12 5.76 51.04 13.29 73.73 19.20 110.60 28.80 132.72 34.56
7.00 1706.44 463.53 22.75 6.18 52.51 14.26 75.84 20.60 113.76 30.90 136.52 37.08
7.50 1753.70 494.80 23.38 6.60 53.96 15.22 77.94 21.99 116.91 32.99 140.30 39.58
8.00 1800.94 526.13 24.01 7.02 55.41 16.19 80.04 23.38 120.06 35.08 144.08 42.09
8.50 1847.52 557.46 24.63 7.43 56.85 17.15 82.11 24.78 123.17 37.16 147.80 44.60
9.00 1894.25 588.84 25.26 7.85 58.28 18.12 84.19 26.17 126.28 39.26 151.54 47.11
9.50 1939.47 619.94 25.86 8.27 59.68 19.08 86.20 27.55 129.30 41.33 155.16 49.60
10.00 1984.62 651.11 26.46 8.68 61.07 20.03 88.21 28.94 132.31 43.41 158.77 52.09
11.00 2062.68 712.88 27.50 9.51 63.47 21.93 91.67 31.68 137.51 47.53 165.01 57.03
12.00 2139.18 774.27 28.52 10.32 65.82 23.82 95.07 34.41 142.61 51.62 171.13 61.94
Page 563
Cost of Diesel (As on 01-04-2022) 102.88 Per Litre
Cost of mobile Oil ( As on 01-04-2022) 322 Per Litre
Hire charges of Loader 646 Per trip
Hire charges of Truck 2500 Per Day
Lead in Total Cost Per Fuel Componant Lead Charges for NP-3 Class Pipes
km Trip Lead
Charges 300 mm 450 mm 600 mm 800 mm 900mm
(Including
lodar)
13.00 2214.18 835.72 29.52 11.14 68.13 25.71 98.41 37.14 147.61 55.71 177.13 66.86
14.00 2288.09 897.21 30.51 11.96 70.40 27.61 101.69 39.88 152.54 59.81 183.05 71.78
15.00 2360.66 958.45 31.48 12.78 72.64 29.49 104.92 42.60 157.38 63.90 188.85 76.68
20.00 2810.21 1270.37 37.47 16.94 86.47 39.09 124.90 56.46 187.35 84.69 224.82 101.63
25.00 3259.46 1582.50 43.46 21.10 100.29 48.69 144.86 70.33 217.30 105.50 260.76 126.60
30.00 3562.45 1885.12 47.50 25.13 109.61 58.00 158.33 83.78 237.50 125.67 285.00 150.81
35.00 3987.45 2195.62 53.17 29.27 122.69 67.56 177.22 97.58 265.83 146.37 319.00 175.65
40.00 4412.65 2506.10 58.84 33.41 135.77 77.11 196.12 111.38 294.18 167.07 353.01 200.49
45.00 4837.45 2816.45 64.50 37.55 148.84 86.66 215.00 125.18 322.50 187.76 387.00 225.32
50.00 5109.53 3117.51 68.13 41.57 157.22 95.92 227.09 138.56 340.64 207.83 408.76 249.40
60.00 5745.98 3724.98 76.61 49.67 176.80 114.61 255.38 165.55 383.07 248.33 459.68 298.00
70.00 6534.75 4341.89 87.13 57.89 201.07 133.60 290.43 192.97 435.65 289.46 522.78 347.35
80.00 7323.82 4959.07 97.65 66.12 225.35 152.59 325.50 220.40 488.25 330.60 585.91 396.73
90.00 8112.36 5576.50 108.16 74.35 249.61 171.58 360.55 247.84 540.82 371.77 648.99 446.12
100.00 8901.96 6193.50 118.69 82.58 273.91 190.57 395.64 275.27 593.46 412.90 712.16 495.48
125.00 10301.18 7700.39 137.35 102.67 316.96 236.94 457.83 342.24 686.75 513.36 824.09 616.03
150.00 12159.53 9235.48 162.13 123.14 374.14 284.17 540.42 410.47 810.64 615.70 972.76 738.84
175.00 13615.84 10746.07 181.54 143.28 418.95 330.65 605.15 477.60 907.72 716.40 1089.27 859.69
200.00 15416.08 12278.94 205.55 163.72 474.34 377.81 685.16 545.73 1027.74 818.60 1233.29 982.32
Page 564
STATEMENT - C 1 ( Pipes)
(FOR YEAR 2022-2023) Maharashtra
Cost of Diesel (As on 01-04-2022) 102.88 per litre
Cost of mobile Oil ( As on 01-04-2022) 322 Per litre
Hire charges of Loader 646 per litre
Hire charges of Truck 2500 per Day
Lead in km Total Cost Per Fuel Componant Lead Charges for NP-4 Class Pipes
Trip Lead
Charges
600 mm 800 mm 900mm 1000 mm 1200 mm 1800 mm
(Including lodar)
Page 565
Cost of Diesel (As on 01-04-2022) 102.88 per litre
Cost of mobile Oil ( As on 01-04-2022) 322 Per litre
Hire charges of Loader 646 per litre
Hire charges of Truck 2500 per Day
Lead in km Total Cost Per Fuel Componant Lead Charges for NP-4 Class Pipes
Trip Lead
Charges
600 mm 800 mm 900mm 1000 mm 1200 mm 1800 mm
(Including lodar)
Page 566
THEORITICAL REQUIREMENT OF MATERIALS BUILDING
EXCAVATION
PILE FOUNDATION
BRICK MASONARY
Page 567
Sr. Item Unit Cement Screened Bricks in M.S.
No. in bags sand in Nos bars in
M3 Kg.
6 Second class brick work in CM 1:8 in superstructure M3 1.12 0.32 475 -
STONE MASONARY
Page 568
Sr. Item Unit Cement Screened Laterite
No. in bags sand in stone 45 x
16 Laterite masonary in CM 1:6 in foundations M3 1.02 M3
0.21 30 45
x 20
Page 569
PAVING AND FLOORING
Page 570
Sr. Item Unit Cement Screened Metal
No. in bags Sand in 20mm in 12/10mm
M3 M3 in M3
29 Plain cement tiles/plain coloured cement tiles M2 0.19 0.02 - -
for treads and risers on bed of 1:4 CM
30 Marble mosaic tiles for treads and risers on bed of M2 0.19 0.02 - -
1:4 cement mortar
31 Marble slabs 20mm thick for treads and risers M2 0.19 0.02 - -
32 Rough shahabad stone 40 to 50 mm for sills on bed M2 0.19 0.02 - -
of 1:4 CM
33 Polished shahabad tandur/kotah/kadappa stone 40 M2 0.19 0.02 - -
to 50 mm thick sill on bed of 1:4 CM
34 Providing sills of precast marble mosaic tiles on M2 0.19 0.02 - -
bed of 1:4 CM
35 White marble slabs dado and skirting M2 0.19 0.02 - -
36 35mm thick precast polished chequered tiles M2 0.16 0.02 - -
/colored cement tiles and treads and plain cement
tiles for risers
37 Polished chequered marble mosaic tiles 20 x 32 cm M2 0.16 0.02 - -
size for flooring / treads
38 Marble/Kadappa/tandur stone partition for urinals M2 0.01 0.005 - -
39 White glazed tiles / oolour glazed tiles of 200 x M2 0.22 0.02 - -
100 mm for flooring on 1: 4 CM
40 White glazed / colour glazed tiles of 200 x 100 mm M2 0.02 0.02 - -
for dado and skirting
41 25mm thick polished kadappa sills on bed M2 0.04 0.02 - -
of 1:4 CM
42 30 x 30 cm ceramic tile flooring on bed of 1:4 CM M2 0.20 0.017 - -
Bd - W. MISCELLANCEOUS
Page 571
Sr. Item Unit Cement Screened Crushed
No. in bags sand in metal
M3 12/10mm
in M3
(D) Vertical surfaces other than columns in 1:3 , ½ CM
Page 572
THEORITICAL REQUIREMENT OF MATERIALS OF BLACK TOP ROAD ITEMS
(AS PER STANDARD SPECIFICATIONS)
Sr. Item Unit Asphalt in Kg Coarse Aggregate
No 40mm in m3 25mm 20mm 12mm 10mm 6mm
m3 in m m3 nm in m3 in m3
in m in m3 nm nm
1 Providing 50mm thick full grout 100 M2 Dose 500.00 6.00 - - 1.50 1.20 -
with seal coat Seal coat 125.00
Total 625.00
2 Providing 50mm thick semi frout 100 M2 Dose 275.00 6.00 - - 1.50 1.20 -
with seal coat Seal coat 125.00
Total 400.00
3 Providing 40mm thick premix 100 M2 304 - 2. - 3. - 0.60
carpet
4 Providing 25mm thick premix 100 M2 205 - - 2. - 1.20 0.60
carpet
5 Providing 20mm thick premix 100 M2 156 - - - 2. 0.90 0.15
carpet
6 Single coat surface dressing on 100 M2 200 - - - 1.50 - -
WBM surface
Page 573
THEORIT1CAL MATERIAL REQUIREMENT
AS PER STANDARD SPECIFICATIONS
(REQUIREMENT OF MATERIALS SHALL BE AS PER ACTUAL JOB MIX
BRIDGE AND C.D. WORKS
Sr. Item Unit Cement Screened Course Aggreagate
No. in bags sand in 40mm in 20mm in 12/10m
M3 M3 M3 m in
M3
1 Plain cement concrete 1:5:10 M3 2.60 0.47 0.94 - -
2 Plain cement concrete 1:4:8 M3 3.40 0.47 0.94 - -
3 Plain cement concrete 1:3:6 M3 4.40 0.47 0.70 0.24 -
4 Plain cement concrete 1:2:4 M3 6.40 0.445 0.67 0.22
5 M-10 grade concrete M3 4.40 0.47 0.70 0.24
6 M-15 grade concrete M3 6.00 0.445 0.67 0.22
7 M-20 grade concrete M3 7.00 0.445 0.67 0.22
8 M-25 grade concrete M3 7.50 0.445 - 0.67 0.22
9 M-30 grade concrete M3 8.00 0.425 - 0.57 0.28
10 M-35 grade concrete M3 8.25. 0.47 0.57 0.28
11 M-40 grade concrete M3 8.50. 0.47 0.57 0.28
11 Cast in situ abutment and piers in 4.40 0.47 0.70 0.57 -
M-10 M3
12 Cast in situ abutment and piers in 6.00 0.47 0.70 0.24 -
M-15 M3
13 Cast in situ abutment and piers in 7.00 0.47 0.70 0.24 -
M-20 M3
14 Cast in situ abutment and piers in 3.90 0.40 0.55 0.24 0.15
M-10 with 15% plum M3
15 Cast in situ abutment and piers in 5.80 0.40 0.55 0.24 0.15
M-15 with 15% plum M3
Page 574
RCC PIPES
Sr. Item Unit Cement Sand in Weight of pipe in
No. in bags M3 NP-2kg /m. NP-3
pipes pipes
1 P & L cc pipes of NP-2 class/
IRC pipes of NP-3 class
i)80mm ø M 20 -
ii)100mm ø M 24 -
iii)150mm ø M 33 -
iv)250mm ø M 52
v)300mm ø M - 75
vi)350mm ø M 92 240
vii)400mm ø M 104 269
viii)450mm ø M 0.12 0.009 128 297
ix)500mm ø M 141 325
x)600mm ø M 0.16 0.011 193 410
xi)700mm ø M 223 470
xii)800mm ø M 0.188 0.012 287 604
xiii)900mm ø M 0.22 0.0154 358 754
xiv)1000mm ø M 0.25 0.017 438 829
xv)1100mm ø M - 525 1054
xvi)1200mm ø M 0.26 0.018 620 1140
Page 575
3B) Bituminous macadam with 3.30% bitumen by weight
A)Bitumen 72.60 Kg/M3
B)Coarse aggregate 11.20 to 26 40mm 0.835 M3
C)Chipping 2.80 to 11.20mm 0.209 M3
D)Fine aggregate Below 2.80mm 0.366 M3
Total 1.380 M3
26 40mm 0.835 M3
C)Chipping 2.80 to 11.20mm 0.209 M3
D)Fine aggregate Below 2.80mm 0.366 M3
Total 1.380 M3
C)Fine aggregate Below 2.80mm Key aggregate 0.13 cum per 10 sqm
passing 22.40
mm and
retained on 2.80
mm
Total 1.13 M3
ii.20mm 0.61 M3
iii.10mm 0.459 M3 1.528 M3
iv.5.60mm and below 0.459 M3
v.Cement filler 0.046 M3
Page 576
7 A) Surface dressing (Table 500.13 page 170)
12 mm size
ii)Over B.T. W.B.M. 20.00 kg/10m2 0.15 m3/102
ii) Second coat of two coat surface 10.00 Kg/10M2 0.10 M3/10M2
dressing (or as a renewal coat)
8) Open graded premix carpet 20mm thick (Table 500.16 Page 178) Clause no. 509
9) Mix seal surfacing (Excluding tack coat) Data book clauseno. 510
10) Bituminous Concrete (Excluding primer /tack coat with cement filler)
Density 2.40 Data Book bitumen content at 5.20 %
10) Bituminous Concrete (Excluding primer /tack coat with cement filler)
Density 2.40 Data Book bitumen content at 5.40 %
Page 577
12) P & L semidense bituminous concrete with 5.50% Bitumen Clause No. 511
(Excluding primer/tack coat)
1 Crushed stone
i) 13.20mm 0.40 M3/M3
ii) 11.20mm 0.64 M3/M3 Total
iii) 5.60mm and below 0.44 M3/M3 1.48 M3
13) Providing and applying premixed seal coat type "B" Clause no. 513
b) Well Steining
i)PCC M-25 grade M3 0.40 0.365 0.382 0.304 0.294
ii)PCC M-30 grade M3 0.42 0.365 0.382 0.304 0.299
iii)RCC M-35 grade M3 0.475 0.40 - 0.57 0.28
iv)RCC M-40 grade M3 0.50 0.40 - 0.57 0.28
Page 578
Sr. Item Unit Cement Coarse Course Aggreagate
No. of in MT Sand in 40mm 20mm 10mm
Data M3 in M3 in M3 in M3
book
c) Bottom Plug
PCC M-20 gfrade M3 0.418 0.45 0.57 0.22 0.11
(including 10%
extra)
d) Top & Intermediate plug
PCC M-15 0.33 0.45 0.52 0.22 0.11
M3
e) Well cap
i) RCC M-20 grade M3 0.38 0.45 0.57 0.22 0.11
ii) RCC M-25 grade M3 0.40 0.365 0.382 0.304 0.299
iii) RCC M-30 grade M3 0.42 0.365 0.382 0.304 0.299
Page 579
Sr. Item Unit Cement Coarse Course Aggreagate
No. of in MT Sand in 40mm 20mm 10mm
Data M3 in M3 in M3 in M3
book
4.13. PCC Leveling coarse of M-15 0.33 0.45 0.52 0.22 0.11
below approach slab M3
Sr. No. Item of Works Ref. of e-ssr Material Material Per Unit
2019-20 item Requirement
no.
1 Granular Sub Base (GSB) 3.01. 53 mm to 9.5 mm 0.640 Cum/Cum
Plant Mix Method and
Grading -I Material 9.5 mm to 2.36 0.256 Cum/Cum
mm
2.36 mm below 0.384 Cum/Cum
2 Granular Sub Base (GSB) 3.02. 26.5 mm to 9.5 0.448 Cum/Cum
Plant Mix Method and mm
Grading -II Material 9.5 mm to 2.36 0.320 Cum/Cum
mm
2.36 mm below 0.512 Cum/Cum
3 Granular Sub Base (GSB) 3.03. 9.50 mm to 4.75 0.448 Cum/Cum
Plant Mix Method and mm
Grading -Ill Material 4.75. mm to 2.36 0.160 Cum/Cum
mm
2.36 mm below 0.672 Cum/Cum
4 Granular Sub Base (GSB) 3.04. 53 mm to 9.5 mm 0.640 Cum/Cum
Mix in Place Method and
Grading -I Material 9.5 mm to 2.36 0.256 Cum/Cum
mm
2.36 mm below 0.384 Cum/Cum
5 Granular Sub Base (GSB) 3.05. 26.5 mm to 9.5 0.448 Cum/Cum
Mix in Place Method and mm
Grading -II Material 9.5 mm to 2.36 0.320 Cum/Cum
mm
2.36 mm below 0.512 Cum/Cum
6 Granular Sub Base (GSB) 3.06. 9.50 mm to 4.75 0.448 Cum/Cum
Mix in Place Method and mm
Grading -Ill Material 4.75. mm to 2.36 0.160 Cum/Cum
mm
2.36 mm below 0.672 Cum/Cum
7 WBM Grading - I 3.18. 90 mm to 45 mm 1.21. Cum/Cum
Using Screening - Type A
Type A 13.2 mm 0.270 Cum/Cum
Binding material 0.08 Cum/Cum
8 WBM Grading - I 3.19. 90 mm to 45 mm 1.21. Cum/Cum
Using Screening - Type B
Type B 11.2 mm 0.240 Cum/Cum
Binding material 0.08 Cum/Cum
9 WBM Grading - II 3.2. 63 mm to 45 mm 1.21. Cum/Cum
Using Screening - Type B
Type B 11.2 mm 0.240 Cum/Cum
Binding material 0.08 Cum/Cum
10 50 mm Modified 3.37a HB metal 0.042 Cum/Sqm
Penetration Mecadam CB metal 0.033 Cum/Sqm
(MPM) over WBM Bulk Bitumen 0.00175 M.T./Sqm
CB-30% & HB-70% (VG-30)
11 50 mm Modified 3.37b CB metal 0.075 Cum/Sqm
Penetration Mecadam Bulk Bitumen 0.00175 M.T./Sqm
(MPM) over WBM (VG-30)
CB-100%
Page 580
Sr. No. Item of Works Ref. of e-ssr Material Material Per Unit
2019-20 item Requirement
no.
12 50 mm Modified 3.38a HB metal 0.042 Cum/Sqm
Penetration Mecadam CB metal 0.033 Cum/Sqm
(MPM) over BT Bulk Bitumen 0.00175 M.T./Sqm
CB-30% & HB-70% (VG-30)
13 50 mm Modified 3.38b CB metal 0.075 Cum/Sqm
Penetration Mecadam Bulk Bitumen 0.00175 M.T./Sqm
(MPM) over BT (VG-30)
14 CB-100%
75 mm Modified 3.35a HB metal 0.063 Cum/Sqm
Penetration Mecadam CB metal 0.045 Cum/Sqm
(MPM) over WBM Bulk Bitumen 0.002 M.T./Sqm
CB-30% & HB-70% (VG-30)
15 75 mm Modified 3.35b CB metal 0.108 Cum/Sqm
Penetration Mecadam Bulk Bitumen 0.002 M.T./Sqm
(MPM) over WBM (VG-30)
16 CB-100%
75 mm Modified 3.36a HB metal 0.063 Cum/Sqm
Penetration Mecadam CB metal 0.045 Cum/Sqm
(MPM) over BT Bulk Bitumen 0.002 M.T./Sqm
CB-30% & HB-70% (VG-30)
Bulk Bitumen 0.0003 M.T./Sqm
(VG-10)
17 75 mm Modified 3.36b CB metal 0.108 Cum/Sqm
Penetration Mecadam Bulk Bitumen 0.002 M.T./Sqm
(MPM) over BT (VG-30)
CB-100% Bulk Bitumen 0.0003 M.T./Sqm
(VG-10)
Page 581
Government of Maharashtra
Vigilance & Quality Control Circle
Pune/ Navi Mumbai/ Nasik/ Amravati/ Aurangabad & Nagpur
INDEX
Sr.
Particulars Pages
No.
1 2 3 4
1) Important Notes 1 1
Schedule of Rate for Construction
2) 2 7
Material Testing Charges
Page 582
Government of Maharashtra
Vigilance & Quality Control Circle
Important Notes
1) The rates Included in this D.S.R. are applicable for all Divisions and Sub
Divisions under P. W. D.and Z. P. Maharashtra State. For work executed in
semi Government and Private establishments the rate shall be twice as
mentioned in the DSR as per the Government in P.W. D. Guidelines Issued
vide Circular No- Lab-1097/34/ NH-2 dated 15.10.1997 Mantralay,Mumbai -
400032.
2) The field Officer will have to strictly adhere to the test frequency stipulated as
per Government guideline.
Page 583
GOVERNMENT OF MAHARASHTRA
Vigilance & Quality Control Circle
Schedule of Testing charges for construction material used for
Effective from 1/ 07/2022 and valid Upto 30/06/2023
1 2 3 4
BASIC TEST OF CEMENT.
1 Standard Consistancy, Fineness, Specific Gravity, Setting Time ( 1 Test 3770.00
Initial & Final ), Compressive Strength, Soundness.
BASIC TEST OF AGGREGATE.
2 Water Absorption, Specific Gravity,Impact Value, Crushing Value. 1 Test 2600.00
Page 584
Sr. Name of Test Test Rate in Rs.
No.
1 2 3 4
MORTOR
27 Compressive Strength.( Set of 3 Cubes) 1 Test 690.00
STONE/ RUBBLE
28 Crushing Value/Compressive Strength, Water Absorption & 1 Test 2020.00
Specific Gravity,
SOIL / MURUM
29 Sieve Analysis. 1 Test 690.00
30 Liquid limit & plastic Limit. 1 Test 1170.00
31 Compaction Test ( Proctor Density ). 1 Test 1860.00
32 C.B.R. Test ( Lab ) With compaction test. 1 Test 6905.00
33 C.B.R. Test ( Field Determination Test) Excluding Transportation.As 1 Test 2600.00
per IS 2720 Part XXXI
34 Dead Journey Charges of inspection Vehical Per Km 17.00
35 Dead Journey Charges of Truck/Tipper Per Km 62.00
36 Sulphate & Chloride Contents. 1 Test 795.00
37 Mechanical Analysis. 1 Test 2230.00
38 Plate Load Bearing Test.(Excluding Transportation) 1 Test 31225.00
39 Free Swell Test for Soil. 1 Test 905.00
BITUMEN
40 Penetration, Softening Point, Flash & Fire Point, Specific Gravity 1 Test 3135.00
41 Viscosity. 1 Test 1910.00
42 Ducility / Elastic Recovery 1 Test 905.00
43 Extraction Test.(Bituminous mix) 1 Test 1595.00
44 Extraction &Sieve Analysis of Bituminous mix ( for BM/DBM/AC) 1 Test 3930.00
(2 samples of extraction for one sieve analysis including extraction)
WATER
57 PH Value, Sulphate & Chloride Content. 1 Test 1115.00
WOOD
58 Density, Moisture Content. 1 Test 1060.00
Page 585
Sr. Name of Test Test Rate in Rs.
No.
1 2 3 4
FLUSH DOOR
59 Knife Test, Adhesion Test, End Immersion Test. 1 Test 2710.00
PLYWOOD
60 Determination of Resistance to dry heat,Determination of Moisture 1 Test 3400.00
Content,Determination of Density,Thickness of Plywood.
61 Test for Glue Adhesion 1 Test 530.00
PARTICAL BOARD
62 Determination of Moisture Content,Determination of Density 1 Test 1595.00
ALUMINIUM SECTION
63 Thickness, Mass Per Running meter, 1 Test 690.00
G.I. PIPES
64 Weight per running meter,Diameter of pipe & wall thickness of pipe, 1 Test 265.00
Page 586
Page 587
Page 588
Page 589
Page 590
Page 591
Page 592
Page 593
Page 594
Page 595
Page 596
Page 597
Page 598
Page 599
Page 600
Page 601
Page 602
Page 603
Page 604
Page 605
Page 606
Page 607
Page 608
Page 609
Page 610
Page 611
Page 612
Page 613
Page 614
Page 615
PUBLIC WORKS DEPARTMENT
The State Schedule of Rates is recommended for the year 2022-23 with effect from 25th July 2022
Approved
Page 616