Catálogo Cameron Bop Novo 2004-2005
Catálogo Cameron Bop Novo 2004-2005
www.camerondiv.com
www.camerondiv.com
QUICK REFERENCE
Available with Cameron Commerce - TRANSACT
The Cameron Commerce Transact section of our website was designed for the benefit of our customers. We
have endeavored to provide all of the key information that our customer’s might need.
• Comply with all relevant HSE legislation, regulations and other requirements
• Ensure that systems are developed and implemented to identify, assess,
monitor, periodically review and control HSE impacts related to our business
activities
• Set HSE objectives and targets, and achieve superior performance (i.e.,
pollution prevention, hazard elimination, no accidents or incidents) through
the utilization of a continuous improvement process incorporating Six Sigma
methodology
• Provide necessary training and education to enable our employees to
understand and perform their roles and responsibilities involved with their
job functions
• Implement mechanisms to communicate with and obtain input from
employees, customers, contractors and other interested parties to the HSE
Management System.
Cameron’s commitment to the customer begins with providing the technology re-
quired to meet the ever changing challenges faced by our industry, followed by the
installation of reliable equipment and continuing thru-out the life of that equip-
ment as showcased by our CAMSERV Aftermarket Services Program.
TECHNOLOGY
Cameron’s experience in providing land and subsea as well as drilling and produc-
tion equipment, makes us uniquely qualified to provide innovative solutions to the
challenges our industry faces today.
RELIABILITY
How quickly you change out your BOP rams is no longer a major consideration be-
cause when you use Cameron, you no longer need to change out the rams.
Cameron offers a full range of rams to suit any application. And when you utilize
genuine Cameron elastomers, you simply don’t have to change out packers and top
seals as frequently.
AFTERMARKET SUPPORT
Our commitment to customer service and support after the sale is showcased in our
CAMSERV Aftermarket Services Program. The CAMSERV program is made up of sev-
eral key areas including replacement parts, field services, reconditioned equipment,
and customer equipment reconditioning and customer property management.
Replacement Parts
CAMSERV Service Centers stock replacement parts, new and reconditioned for im-
mediate delivery. Parts are stocked based on the anticipated needs of local custom-
ers; as the needs change, so does Cameron’s inventory. Less frequently needed parts
can be quickly located through Cameron’s Global Product Search Engine (GPSE). In
addition, parts may be ordered online via Transact – a real time system, that allows
customers to place orders right from their desktops.
Field Services
CAMSERV field service technicians are on call 24-hours a day, 7-days a week to han-
dle on-site service needs. Cameron technicians are highly skilled in providing instal-
lation assistance; trouble shooting, doing routine maintenance and making field
repairs.
Reconditioned Equipment
CAMSERV Service Centers strategically located around the world, offer a full range
of equipment repair and remanufacturing services, and not just for Cameron brand
products. Cameron offers a wide range of repair options that are all dependant on
the customer’s requirements, equipment condition, and service environment. These
options would range from a simple, test and fix leaks to a major, overhaul and
re-certification that would include welding and machining.
From its Katy facility west of Houston, Texas, Cameron Elastomer Technology pro-
vides engineered solutions to elastomeric material problems. State-of-the-art re-
search, including associated mechanical design and engineering, is conducted at this
totally integrated manufacturing facility.
The plant is designed to support Cameron Division’s elastomer components and de-
velop new products to meet the most stringent operating and environmental condi-
tions.
CET offers molded products utilizing compression, transfer and injection molding
techniques. Critical molded products are qualification-tested prior to release for
production.
CET’s facilities provide “life prediction” and immersion testing. The life-prediction
testing is based on the Arrhenius principle of thermochemical reactions. Elevated
temperatures are used to accelerate the thermochemical degradation of elastomer
materials. Hydrogen Sulfide (H2S) testing is also available and an integral part CET’s
severe environment testing.
Safety Tip: In order to provide the safest, healthiest work environment for your
rig personnel, proper care and maintenance of critical rig equipment is essential and
the best source is your OEM.
A simple visual examination confirms if your elastomers are genuine Cameron parts.
For more information on how you can ensure that your parts are genuine, refer to
Cameron Information Sheet TC984 available online at www.camerondiv.com under
Documents, or contact your local Cameron representative.
The purpose of this catalog is to serve as a quick reference for our customers. How-
ever, many of Cameron’s products are designed to customer specific requirements.
All the information contained in this catalog is generic, weights, dimensions, part
numbers, etc. should be confirmed for your specific equipment.
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Hydraulic Control System. . . . . . . . . . . . . . . . . . . . . . . . . . 16
Operating Data and Fluid Requirements . . . . . . . . . . . . . . . . . 16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Part Numbers
7-1/16” 3000 - 7-1/16" 15,000 . . . . . . . . . . . . . . . . . . . . . . . 21
11” 3000 - 11” 15,000. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
13-5/8" 3000 - 13-5/8" 15,000 . . . . . . . . . . . . . . . . . . . . . . . 23
16-3/4” 3000 - 18-3/4” 10,000 . . . . . . . . . . . . . . . . . . . . . . . 24
20-3/4" 3000 - 26-36/4" 3000 . . . . . . . . . . . . . . . . . . . . . . . . 25
Bonnet Rebuild Softgoods Kits. . . . . . . . . . . . . . . . . . . . . . . 26
Drill Pipe Shearing Requirements . . . . . . . . . . . . . . . . . . . . . 28
Lifting Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Large Bore Shear Bonnet . . . . . . . . . . . . . . . . . . . . . . . . . 29
Large Bore Shear Bonnet Softgoods Kits . . . . . . . . . . . . . . . . . 30
Tandem Boosters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
UM™ BOPs
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Hydraulic Control System. . . . . . . . . . . . . . . . . . . . . . . . . . 34
Operating Data and Fluid Requirements . . . . . . . . . . . . . . . . . 35
Specifications and Dimensions . . . . . . . . . . . . . . . . . . . . . . 37
Part Numbers
7-1/16” 5000 - 15,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
11” 5000 & 10,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
11" 15,000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
13-5/8” 5000 & 10,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Minimum Shearing Configurations . . . . . . . . . . . . . . . . . . . . 49
Tandem Boosters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Standard Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Pipe Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Hang-Off Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
H2S Shearing Blind Ram . . . . . . . . . . . . . . . . . . . . . . . . . . 61
DS Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . 62
ISR Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . 63
DSI and DVS Shear Rams . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Variable Bore Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
FLEXPACKERs and FLEXPACKER-NRs . . . . . . . . . . . . . . . . . . . . 66
Inserted Packers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
CAMRAM 350 Packers and Top Seals . . . . . . . . . . . . . . . . . . . 68
Optional Ram Wear Pads . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Hydraulic Bonnet Bolt System . . . . . . . . . . . . . . . . . . . . . . . 69
Bonnet Seals and Connecting Rod Seals . . . . . . . . . . . . . . . . . 70
Bonnet Seal Carriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
UII™ BOP
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Hydraulic Control System. . . . . . . . . . . . . . . . . . . . . . . . . . 74
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Pipe Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Variable Bore Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Bonnet Seals and Connecting Rod Seals . . . . . . . . . . . . . . . . . 80
Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
CAMRAM 350 Packers and Top Seals . . . . . . . . . . . . . . . . . . . 82
CAMRAM High Temp Shearing Blind Ram Blade & Side Packers . . . . . 82
Optional Wear Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Hydraulic Control System. . . . . . . . . . . . . . . . . . . . . . . . . . 84
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Part Numbers
13-5/8” 10,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
18-3/4” 15,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
High Temp Connecting Rod Seals . . . . . . . . . . . . . . . . . . . . . 90
TL™ BOP
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Specifications and Dimensions . . . . . . . . . . . . . . . . . . . . . . 95
RamLock Bonnet Subassembly Components . . . . . . . . . . . . . . . 96
RamLock Operating Piston Subassemblies . . . . . . . . . . . . . . . . 101
ST Lock Bonnet Subassembly Components . . . . . . . . . . . . . . . . 104
ST Lock Assembly Components. . . . . . . . . . . . . . . . . . . . . . . 106
Sequencing Valve Assembly Components . . . . . . . . . . . . . . . . . 107
Wedgelock Bonnet Subassembly Components . . . . . . . . . . . . . . 108
Manual Locking Screw Bonnet Components . . . . . . . . . . . . . . . 110
Super Shear Bonnets . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Tandem Boosters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
T and TL BOP
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Operating Data and Fluid Requirements . . . . . . . . . . . . . . . . . 124
Hydraulic Control System. . . . . . . . . . . . . . . . . . . . . . . . . . 124
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Sequencing Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
DSI Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Shearing Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Pipe Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Shear Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Wireline Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Dimensions and Weights . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Part Numbers
7-1/16” 3000 - 20,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
11” 3000 - 15,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
13-5/8” 5000 - 16-3/4” 5000 . . . . . . . . . . . . . . . . . . . . . . . . 147
18-3/4” 5000 - 18-3/4" 10,000 . . . . . . . . . . . . . . . . . . . . . . . 149
20-3/4" 3000 - 21-1/4" 5000 . . . . . . . . . . . . . . . . . . . . . . . . 151
Replacement Part Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Annular Stripper Packer . . . . . . . . . . . . . . . . . . . . . . . . . . 155
• Bonnet seal carrier is available to eliminate the need for high makeup torque on bonnet bolts
and nuts. The new 13-5/8” bodies have a bore seal. Therefore you can add the seal carrier
without additional re-work. All other sizes require modification to accept the seal carrier.
• Manual or Hydraulic operating systems available.
• Hydraulically operated locking mechanisms, wedgelocks, lock the ram hydraulically and hold
the rams mechanically closed even when actuating pressure is released. The operating system
can be interlocked using sequence caps to ensure that the wedgelock is retracted before
pressure is applied to open the BOP.
• For subsea applications, a pressure balance chamber is used with the wedgelocks to eliminate
the possibility of the wedgelock becoming unlocked due to hydrostatic pressure.
• Retrofit to UM Bonnet is available to provide more shearing force without the need for shear
bonnets, large bore bonnets, or tandem boosters.
Other features include hydraulically opening bonnets, forged body and a wide selection of rams to
meet all applications. See page 53 for rams available to fit the U BOP.
Wedgelock Assembly
SD 034598
U Blowout Preventer
Ram closing pressure closes the rams. When the bonnet bolts are removed, closing pressure opens the bonnet.
After the bonnet has moved to the fully extended position, the ram is clear of the body. An eyebolt can be in-
stalled in the top of each ram to lift it out of the preventer.
Ram opening pressure opens the rams. Following ram change-out, this pressure closes the bonnets. The rams are
pulled outward, near the bonnets, before the bonnets begin moving toward the preventer body. This assures
that the rams never obstruct the bore or interfere with the pipe in the hole. Hydraulic pressure draws the bon-
nets tightly against the preventer body and the bonnet bolts are reinstalled to hold the bonnets closed.
U BOP Operating Data and Fluid Requirements Large Bore Shear Bonnet Operating Data and Fluid Requirements
Gals to
Gals to Locking Gals to
Bore Size and Close Bore Size and Gals to Open Locking
Open Screw Closing Opening Close Closing Opening
Working Pipe Working Pipe Rams Screw Turns
Pipe Rams Turns Ratio Ratio Pipe Rams Ratio Ratio
Pressure Rams Pressure (1 Set) (Each End)
(1 Set) (Each End) (1 Set)
(1 Set)
7-1/16” All WP 1.3 1.3 18 6.9:1 2.2:1 7-1/16” All WP - - - - -
11” Except 15,000 11” Except 15,000
3.4 3.5 27 7.3:1 2.5:1 6.8 7.0 27 12.0:1 4.8:1
psi psi
11” 15,000 psi 5.7 5.8 32 9.8:1 2.2:1 11” 15,000 psi 8.9 9.0 32 15.2:1 3.7:1
13-5/8” Except 13-5/8” Except
5.5 5.8 32 7.0:1 2.3:1 10.5 10.9 32 10.8:1 4.5:1
15,000 psi 15,000 psi
13-5/8” 15,000 psi 13-5/8” 15,000 psi
10.4 10.6 45 10.6:1 3.6:1 16.0 16.2 45 16.2:1 6.0:1
Model B Model B
16-3/4” 3000 psi 16-3/4” 3000 psi
9.8 10.6 38 6.8:1 2.3:1 18.2 19.0 38 10.4:1 4.4:1
Model B Model B
16-3/4” 5000 psi 16-3/4” 5000 psi
9.8 10.6 38 6.8:1 2.3:1 18.2 19.0 38 10.4:1 4.4:1
Model B Model B
16-3/4” 10,000 psi 11.6 12.5 45 6.8:1 2.3:1 16-3/4” 10,000 psi 18.2 19.1 45 10.4:1 4.4:1
18-3/4” 10,000 psi 21.3 23.1 54 7.4:1 3.7:1 18-3/4” 10,000 psi - - - - -
20-3/4” 3000 psi 8.1 8.7 46 7.0:1 1.3:1 20-3/4” 3000 ps 14.3 14.9 46 10.8:1 1.7:1
21-1/4” 2000 psi 9.0 8.7 46 7.0:1 1.3:1 21-1/4” 2000 psi 14.3 14.9 46 10.8:1 1.7:1
21-1/4” 5000 psi 27.3 30.0 54 7.2:1 4.0:1 21-1/4” 5000 psi - - - - -
21-1/4” 10,000 psi 24.5 26.9 51 7.2:1 4.0:1 21-1/4” 10,000 psi - - - - -
26-3/4” 3000 psi 10.1 10.8 58 7.0:1 1.0:1 26-3/4” 3000 ps - - - - -
Hydraulic control connections for operation of rams and bonnets are 1” NPT. There are
two connections for each set of rams. Wedgelock connections are ½” NPT.
The capital letters in the following designations refer to the U BOP dimensional views
and dimensional charts shown on the following pages.
Note: All weights listed are based on utilizing closed die forgings.
B G
7-1/16* 3000 7-1/16 74.00 109.50 - - 24.06 - 20.25 8.75 - 7.84 - 5.50 2600
7-1/16* 5000 7-1/16 74.00 109.50 - - 27.50 25.19 20.25 10.41 9.25 9.63 8.47 5.50 2800
7-1/16 10,000 7-1/16 74.00 109.50 - - 30.56 27.19 20.63 11.06 9.38 12.03 10.34 5.50 3550
7-1/16 15,000 7-1/16 74.00 109.50 - - 31.81 - 20.63 11.69 - 12.66 - 5.50 3800
11* 3000 11 96.25 146.88 - - 29.06 - 25.13 9.81 - 10.53 - 6.75 5300
11* 5000 11 96.25 146.88 110.13 150.19 34.31 29.31 25.13 12.44 9.94 13.16 10.66 6.75 5600
11* 10,000 11 96.25 146.88 110.13 150.19 35.69 32.19 25.75 13.13 11.38 13.84 12.09 6.75 6400
11 Model 79 15,000 11 124.00 175.31 124.50 167.13 44.81 33.88 32.00 16.69 11.22 17.78 12.31 9.25 10,300
13-5/8 3000 13-5/8 112.13 171.50 122.69 166.06 31.31 - 29.25 10.31 - 11.53 - 7.50 7200
13-5/8 5000 13-5/8 112.13 171.50 122.69 166.06 33.81 31.94 29.25 11.56 10.63 12.78 11.84 7.50 7700
13-5/8 10,000 13-5/8 114.13 172.75 124.69 167.31 41.69 32.81 30.25 15.13 10.69 17.09 12.66 7.50 10,300
13-5/8 Model B* 15,000 13-5/8 139.00 214.38 152.25 205.50 53.69 42.00 39.50 21.38 15.50 22.84 17.00 8.00 23,700
16-3/4 Model B 3000 16-3/4 127.25 204.56 147.25 199.38 40.06 31.75 35.75 13.31 9.16 15.41 11.25 9.25 13,700
16-3/4 Model B 5000 16-3/4 129.25 202.13 149.25 202.25 43.06 34.94 35.75 14.81 10.75 16.91 12.84 9.25 13,750
16-3/4* 10,000 16-3/4 139.00 218.38 155.50 212.00 49.69 41.94 39.50 19.38 15.50 20.22 16.34 9.25 23,300
18-3/4 10,000 18-3/4 156.38 242.13 166.50 226.63 56.00 43.23 42.50 20.50 13.88 22.00 15.34 12.00 28,900
20-3/4 3000 20-3/4 143.69 226.81 163.94 223.88 40.56 33.31 39.52 14.31 10.69 16.28 12.66 8.00 13,650
21-1/4 2000 21-1/4 143.69 226.81 163.94 223.88 37.9 33.31 39.52 12.63 10.69 14.59 12.66 8.00 13,250
21-1/4 5000 21-1/4 164.25 247.25 180.94 239.25 50.94 46.13 42.50 17.97 17.19 18.72 14.69 13.50 30,000
21-1/4* 10,000 21-1/4 163.38 250.38 181.13 239.50 66.00 53.00 47.25 24.53 18.03 26.25 19.75 13.50 34,650
26-3/4 3000 26-3/4 169.63 275.38 - - 48.31 - 46.25 17.44 - 19.91 - 8.00 24,000
Note: All weights listed are based on utilizing closed die forgings.
B J
G H
7-1/16* 3000 7-1/16 74.00 109.50 - - 41.00 - 18.56 20.25 8.75 - 7.84 - 5.50 25.69 - 11.44 5000
7-1/16* 5000 7-1/16 74.00 109.50 - - 44.19 41.88 18.81 20.25 10.41 9.25 9.63 8.47 5.50 27.09 25.94 11.19 5200
7-1/16 10,000 7-1/16 74.00 109.50 - - 48.63 45.25 17.44 20.63 11.06 9.38 12.03 10.34 5.50 29.13 27.44 12.56 6400
7-1/16 15,000 7-1/16 74.00 109.50 - - 49.88 - 17.44 20.63 11.69 - 12.66 - 5.50 29.75 - 12.56 6750
11* 3000 11 96.25 146.88 - - 49.25 - 16.56 25.13 9.81 - 10.53 - 6.75 30.00 - 13.44 9900
11* 5000 11 96.25 146.88 110.13 150.19 54.50 49.50 16.56 25.13 12.44 9.94 13.16 10.66 6.75 32.63 30.13 13.44 10,200
11* 10,000 11 96.25 146.88 110.13 150.19 55.88 52.38 16.56 25.75 13.13 11.38 13.84 12.09 6.75 33.31 31.56 13.44 11,300
11"
Model 15,000 11 124.00 175.31 124.50 167.13 69.75 58.81 14.31 32.00 16.69 11.22 17.78 12.31 9.25 41.63 36.16 15.69 18,400
79
13-5/8 3000 13-5/8 112.13 171.50 122.69 166.06 53.38 - 15.44 29.25 10.31 - 11.53 - 7.50 32.38 - 14.56 14,300
13-5/8 5000 13-5/8 112.13 171.50 122.69 166.06 55.88 54.00 15.44 29.25 11.56 10.63 12.78 11.84 7.50 33.63 32.69 14.56 14,800
13-5/8 10,000 13-5/8 114.13 172.75 124.69 167.31 66.63 57.75 12.56 30.25 15.13 10.69 17.09 12.66 7.50 40.06 35.63 17.44 18,400
13-5/8
15,000 13-5/8 139.00 214.38 152.25 205.50 81.75 70.13 9.94 39.50 21.38 15.50 22.84 17.00 8.00 49.44 43.56 20.06 43,250
Mod B*
16-3/4”
3000 16-3/4 127.25 204.56 147.25 199.38 65.88 57.56 13.44 35.75 13.31 9.16 15.41 11.25 9.25 39.13 34.97 16.56 26,650
Mod B
16-3/4
5000 16-3/4 129.25 202.13 149.25 202.25 68.88 60.75 13.44 35.75 14.81 10.75 16.91 12.84 9.25 40.63 36.56 16.56 26,940
Mod B
16-3/4* 10,000 16-3/4 139.00 218.38 155.50 212.00 77.75 70.00 11.19 39.50 19.38 15.50 20.22 16.34 9.25 47.44 43.56 18.81 43,500
18-3/4 10,000 18-3/4 156.38 242.13 166.50 226.63 87.13 74.00 10.88 42.50 20.50 13.88 22.00 15.34 12.00 51.50 44.88 19.13 56,950
20-3/4 3000 20-3/4 143.69 226.812 163.94 223.88 66.13 58.88 12.44 39.52 14.31 10.69 16.28 12.66 8.00 39.88 36.25 17.56 25,550
21-1/4 2000 21-1/4 143.69 226.81 163.94 223.88 62.75 58.88 12.44 39.52 12.63 10.69 14.59 12.66 8.00 38.19 36.25 17.56 25,150
21-1/4 5000 21-1/4 164.25 247.25 180.94 239.25 82.38 74.00 12.38 42.50 17.97 17.19 18.72 14.69 13.50 49.03 45.00 17.63 58,000
21-1/4* 10,000 21-1/4 163.38 250.38 181.13 239.50 100.06 87.06 9.44 47.25 24.53 18.03 26.25 19.75 13.50 58.59 52.09 20.56 65,500
26-3/4 3000 26-3/4 169.63 275.38 - - 78.88 - 7.44 46.25 17.44 - 19.91 - 8.00 48.00 - 22.56 44,200
Note: All weights listed are based on utilizing closed die forgings.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
24
42
28
34
30
31
32
24
26 29
27
33
21
18
20
19
25
SD 017515
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
For further information on shearing requirements for different pipe sizes and
grades, please refer to EB702D or contact your Cameron representative.
API
Designated Ram Type Pressure Rating (psi) Pipe OD (In.) Pipe lb/ft Pipe Grade Shearing Configuration
Size
7-1/16” SBR All 3-1/2 13.3 S Shear Bonnets with Tandem Boosters
7-1/16" DSI All 3-1/2 13.3 S Shear Bonnets with Tandem Boosters
11” SBR 10,000 and Lower 5 19.5 E Large Bore Shear Bonnets with Tandem Boosters
11” DS/ISR 10,000 and Lower 5 19.5 E Large Bore Shear Bonnets with Tandem Boosters
11” SBR 15,000 and Higher 5 19.5 G Large Bore Shear Bonnets with Tandem Boosters
13-5/8” SBR 10,000 and Lower 5 19.5 G Shear Bonnets with Tandem Boosters
13-5/8” DS/ISR 10,000 and Lower 5 19.5 G Large Bore Shear Bonnets
13-5/8” SBR 15,000 and Higher 5 19.5 S Large Bore Shear Bonnets
16-3/4” SBR All 5 19.5 S Large Bore Shear Bonnets
18-3/4” SBR All 5 19.5 S Standard Bonnets
20-3/4” SBR 3000 and Lower 5 19.5 G Shear Bonnets with Tandem Boosters
21-1/4” SBR 3000 and Lower 5 19.5 G Shear Bonnets with Tandem Boosters
21-1/4” SBR 5000 and Higher 5 19.5 S Standard Bonnets
21-1/4 SBR 10,000 and Higher 5 19.5 G Standard Bonnets
BOP Size (in.) Pressure Rating Lifting Plate Assy Rating (Tons)
7-1/16 3000, 5000, 10,000 and 15,000 psi 644930-07 60
11 3000, 5000 and 10,000 psi 644930-03 50
11 15,000 psi 644930-02 50
13-5/8 3000, 5000, 10,000 and 15,000 psi 644930-01 50
13-5/8 3000, 5000 10,000 and 15,000 psi 644930-05 120
16-3/4 3000 and 5000 psi 644930-04 50
16-3/4 10,000 psi 644930-01 50
16-3/4 3000, 5000 and 10,000 psi 644930-05 120
18-3/4 10,000 psi 644930-06 100
18-3/4 10,000 psi 2011800-01 100
20-3/4 3000 psi 644930-01 50
20-3/4 3000 psi 644930-05 120
21-1/4 2000 psi 644930-01 50
21-1/4 2000 psi 644930-05 120
21-1/4 5000 psi 644930-06 100
21-1/4 5000 psi 2011800-01 100
21-1/4 5000 and 10,000 psi (Special) 644852-03 180
12A**
24A 2A
26A
5A
42A
Large Bore Shear Ram
Bonnet Assembly
3A
SD-017503
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
17 7
10
9 4
16
13
11
12
2
6
1
8
3
14 Tandem Booster Assembly
15
23 SD-017504
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
10
12
13
6
SD 034591
5
23
7
11
3
14
15
2
16
17
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
TC1001-04 32 © 2004 Cooper Cameron, Cameron Division
UM BOPs
The Cameron type UM BOP is a lightweight blowout preventer designed for easy maintenance and long life.
The UM compliments the existing line of U preventers with interchangeable bonnets that can be installed on
any comparable size type U BOP. The shearing capabilities of the UM BOP bonnet is achieved by simply re-
versing the operating piston. The UM features a patented, reversible piston that converts standard pipe ram
operating pistons to a larger piston designed for shearing. This feature reduces weight and length for the
preventer and eliminates the need for external plumbing. The UM replaces the UL since the UM bonnet fea-
tures full stroke operation that allows for one-step ram removal. For individual Cameron Ram BOP shearing
characteristics, including the UM BOP, refer to Engineering Bulletins EB571D, EB685D, EB691D and EB702D.
Other features of the UM BOP include:
• Bonnet seal carrier is available to eliminate the need for high makeup torque on bonnet studs and
nuts.
• Same bonnet used for both shear and pipe rams. The internal shear booster can be reversed to act as
a stroke-limiting device
• Internal reversible piston provides additional force necessary for shearing a wide variety of pipe and
at the same time provides a reduced sealing force for long ram seal life.
• Hydraulically operated locking mechanisms, wedgelocks are available for subsea applications.
• Most operating system seals can be replaced with the bonnet in the ram-change position without
removing the bonnets.
• UM utilizes the same rams as the U BOP.
Other features include hydraulically opening bonnets, forged body and bonnet construction with a wide sec-
tion of rams to meet all applications.
UM Blowout Preventer
SD 034595
Pipe Pipe
Bonnet Bonnet
Shear Shear
Bonnet Bonnet
SD 034582
E
SD 034610
J
B
E H
SD 034560
C
D
F G
B
E
SD 034612
5
33
34
40
26
22
35
6
37
4
33
34
29
28
27
24
38
20
39
53
66
14 17
51 15
11 10 52
13
44 12
25
67
56
36 54
1
55
21
16
18
19
2
50
UM BOP, 7-1/16”
SD 034510
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
5
28
32
38
26
22
30
31
3
33
6
35
4
28
32
17
24
36
20
37
86 87
17
14
15
62
10
78
42 2
25 40
34
1
11
43
16
18
19
12 13
41 29
74
52
SD 034498
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
TC1001 43 © 2004 Cooper Cameron, Cameron Division
TC1001-04 44 © 2004 Cooper Cameron, Cameron Division
11” 15,000 UM BOP Part Numbers
Qty Qty 11”
Item No. Description
Single Double 15,000 psi
1 Body 1 1 ----
2 Bonnet (Seal Carrier) 2 4 2231079-01
2A Bonnet (Face Seal) 2 4 ----
3 Piston Subassembly 2 4 2231105-01
4 Ram Change Piston - Open 2 4 2164854-01
4A Ram Change Piston - Open, Special ---- ---- ----
5 Ram Change Piston - Close 2 4 2164853-01
5A Ram Change Piston - Close, Special ---- ---- ----
6 Ram Change Cylinder 4 8 2164347-02
*7 Ring, Wear 4 8 049223-38
*8 O-Ring 4 8 702645-35-71
9 Ram Change Piston Cap 4 8 2164855-01
10 Ram Guide Pin 4 8 030313-01
11 Ring, Retaining 8 16 708758
12 Retainer, Polypak 8 16 689523-06
*14 O-Ring 8 16 2724613-01
*15 Ring, Ram Change Piston, Wear 2 4 2164449-01
16 Valve, Check 2 4 M51798
17 Screw, Socket Head 2 4 005940-09
18 Plug, Pipe 2 4 005930-05-10
*19 Packing, Plastic 2 4 007650-25
20 Locking Screw 2 4 695234
22 Locking Screw Housing 2 4 2164346-01
23 Operating Cylinder 2 4 2164348-02
24 Cylinder Head Weldment 2 4 2164852-01
25 Stud, Double Ended 12 24 2164361-01
26 Nut 12 24 2709000-12-21
*27 Ring, Plastic Packing 2 4 012469-24
*28 Ring, Energizing 2 4 018586-01
*29 Ring, Operating Piston, Wear 2 4 049223-31
*30 Seal Ring 2 4 2724061
*31 O-Ring 4 8 702645-38-21
32 Washer 24 48 K220607
33 Washer, Bonnet Bolt 8 16 2164450-01
*35 O-Ring 4 8 702645-33-81
*36 O-Ring 8 16 702645-34-61
*37 O-Ring 8 16 702645-32-81
*38 O-Ring 4 8 702645-33-31
39 Screw 16 32 702585-25-00-30
40 Lifting Eye 4 8 11849
42 Plug, Bleeder 4 8 2028834-01
43 Plug, Pipe 8 16 002504-14
45 Plug, Pipe 4 8 203682
50 Bonnet Bolt 8 16 2164362-01
*51 O-Ring 8 16 2164718-01
66 Plug, Pipe 2 4 201019
69 Bonnet Seal Carrier 2 4 2231081-01
83 Bonnet Seal Carrier Seal Mold 4 8 2231080-01
Accessory Items
Standard Accessories 1 1 697149-12
Locking Screw Accessories 2 4 697150-02
Protector, Bride 1 1 236177-42
Expendable Items
Ring Gaskets (Top & Bottom) 2 2 702003-15-82
Bonnet Rebuild Kit 2 4 2010733-03
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
4
75
74
76 1
78
10
41
42
2
40
43 66
11
33 65
50 See Detail
30
3 “A” 64
29
71
3
51
18 70
17
19
16
40 11
43 12
43 14
14 27
12 28
25
11
41
42
24 Detail “A”
43
14
14
12
43
43
12
11
32
26
UM BOP, 13-5/8”
SD034538
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
*These items included in Bonnet Rebuild Kit P/N 2010733-03. Two required for single, Four required for double.
**Not Required When Using Wedgelocks or Tandem Boosters
***Optional Tandem Boosters
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
7-1/16” SBR All 3-1/2 13.3 S Shear Bonnets with Tandem Boosters
7-1/16" DSI All 3-1/2 13.3 S Shear Bonnets with Tandem Boosters
11” SBR 10,000 and Lower 5 19.5 E Shear Bonnets with Tandem Boosters
11” DS 10,000 and Lower 5 19.5 E Standard Bonnets
13-5/8” SBR 10,000 and Lower 5 19.5 G Shear Bonnets with Tandem Boosters
13-5/8” DS 10,000 and Lower 5 19.5 G Shear Bonnets with Tandem Boosters
Note: See pages 50 and 51 for a complete list of part numbers for the tandem boosters.
16
1
7
17
5
13
12
6
15
14
3
11
10
9
24
23
4
25
8
28
29
26
27 29
30
SD 034536
*These items are included in the repair kit. One repair kit required per unit.
*One required
**Two required for single preventer, four for double preventer.
***Commercially available sockets are recommended.
Pipe rams are available for use in Cameron U, UL and UM BOPs to fit all commonly
used sizes of tubing, drill pipe, drill collar or casing within the ranges in the charts
on the following pages. Cameron pipe rams include the following features:
CAMRAM 350™ packers and top seals are available for high temperature service and
for service in which concentrations of H2S are expected.
7-1/16” 11”
Pipe Size 3000, 5000, 10,000, and 15,000 psi WP 3000, 5000, and 10,000 psi WP
(in.) Top Seal 644214-01-00-01 Top Seal 644217-01-00-01
Assembly Ram Packer Assembly Ram Packer
Blind 644504-01 644500-01-00-02 644215-01-00-01 644219-01 044118-01 644218-01-00-01
1.050 644504-02 644501-01 644215-02 - - -
1.315 644504-03 644501-02 644215-03 044233-25 044118-07 644218-02-00-01
1.660 644504-04 644501-03 644215-04-00-01 044233-02 044118-02 644218-03-00-01
1.900 644504-05 644501-04 644215-05-00-01 044233-03 044118-03 644218-04-00-01
2.062 644504-06 644501-05 644215-06-00-01 044233-04 044118-04 644218-05-00-01
2.375 644504-07 644501-06 644215-07-00-01 644219-06 044118-05 644218-06-00-01
2.875 644504-08 644501-07 644215-08-00-01 644219-07 044118-06 644218-07-00-01
3.500 644504-09 644502-01-00-01 644215-09-00-01 644219-08 644835-01-00-02 644218-08-00-01
4.000 644504-11 644503-02 644215-11-00-01 644219-10 044119-02 644218-10-00-01
4.500 644504-12 644503-03 644215-12-00-01 644219-11 644835-02 644218-11-00-01
4.750 - - - 044233-12 044119-04 644218-13
5.000 644504-14 644503-05 644215-14-00-01 644219-14 644835-03-00-01 644218-14-00-01
5.500 644504-15 644503-06 644215-15-00-01 644219-16 044120-01 644218-16-00-01
5.750 - - - 044233-23 044120-10 644218-17
5.875 - - - - - -
6.000 - - - 044233-16 044120-02 644218-18-00-01
6.625 - - - 044233-17 644835-04 644218-19-00-01
7.000 - - - 044233-18 044120-04 644218-20-00-01
7.625 - - - 044233-19 044120-05 644210-21-00-01
7.750 - - - 044233-22 044120-09 644218-22-00-01
8.625 - - - 044233-20 044120-06 644218-23-00-01
9.000 - - - - - -
9.625 - - - - - -
10.750 - - - - - -
11.750 - - - - - -
3.500
644504-10 644503-01 644215-10 044233-08 044119-06 644218-09
Aluminum
4.500
644504-13 644503-04 644215-13 044233-11 044119-07 644218-12
Aluminum
5.000
- - - 044233-24 044119-08 644218-15
Aluminum
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
11” 13-5/8”
Pipe Size 15,000 psi WP 3000, 5000, and 10,000 psi WP
(in.) Top Seal 2010453-01 Top Seal 644223-01-00-01
Assembly Ram Packer Assembly Ram Packer
Blind 644222-01 044121-01 644221-01 644225-01 044147-01-00-01 644224-01-00-01
1.050 - - - - - -
1.315 - - - 644225-02 044148-06 644224-02
1.660 644222-02 044121-02 644221-02 644225-03 044148-05 644224-03
1.900 644222-03 044121-03 644221-03 644225-04 044148-07 644224-04
2.062 644222-04 044121-04 644221-04 644225-05 044148-03 644224-05
2.375 644222-05 044121-05 2010454-05 644225-06 044148-01-00-01 644224-06-00-01
2.875 644222-06 044121-06 2010454-06 644225-07 044148-02-00-01 644224-07-00-01
3.500 644222-07 644753-01 2010454-07 644225-08 644738-01-00-01 644224-08-00-01
4.000 644222-08 044122-04 2010454-08 644225-10 044149-02 644224-10-00-01
4.500 644222-09 644753-02 2010454-09 644225-11 644738-02 644224-11-00-01
4.750 - - - 644225-13 044150-01 644224-13
5.000 644222-10 644753-03 2010454-10 644225-14 644738-03-00-01 644224-14-00-01
5.500 044234-13 044123-01 2010454-11 644225-16 044150-03 644224-16-00-01
5.750 - - - - - -
5.875 - - - 644225-30 644738-06-00-01 644224-29-00-01
6.000 044234-14 044123-02 690808-13 044244-13 044150-04 644224-17
6.625 044234-15 044123-03 690808-14 644225-18 644738-04-00-02 644224-18-00-01
7.000 044234-16 044124-01 2010454-14 644225-19 044151-01-00-01 644224-19-00-01
7.625 044234-17 044124-02 690808-16 644225-20 044151-02 644224-20-00-01
7.750 - - - 044244-25 044151-06 644224-21
8.625 - - - 044244-16 044151-03 644224-22
9.000 - - - 044244-24 044151-04 644224-23
9.625 - - - 644225-24 044151-05-00-01 644224-24-00-01
10.750 - - - 644225-25 044152-01 644224-25-00-01
11.750 - - - 044244-26 614208-01 644224-26-00-01
3.500
- - - 044244-20 044149-04 644224-09
Aluminum
4.500
- - - 044244-10 044149-05 031215-17
Aluminum
5.000
- - - 044244-32 044150-08 031215-27
Aluminum
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
13-5/8” 16-3/4”
Pipe Size 15,000 psi 3000, 5000, and 10,000 psi
(in.) Top Seal 644226-01-00-01 Top Seal 644229-01-00-01
Assembly Ram Packer Assembly Ram Packer
Blind 644228-01 044143-01 644227-01-00-01 644231-01 044179-01 644230-01-00-01
1.050 - - - - - -
1.315 - - - - - -
1.660 - - - - - -
1.900 - - - 644231-02 044180-03 644230-02-00-01
2.062 044243-02 044144-03 040910-20 - - -
2.375 644228-03 044144-01 644227-03-00-01 644231-03 044180-01 644230-03
2.875 644228-04 044144-02 644227-04-00-01 644231-04 044180-02 644230-04
3.500 644228-05 644739-01 644227-05-00-01 644231-05 644740-01 644230-05-00-01
4.000 644228-07 044144-06 644227-07-00-01 644231-06 044181-02 644230-06-00-01
4.500 644228-08 644739-02 644227-08-00-01 644231-07 644740-02 644230-07-00-01
4.750 044243-10 044145-01 644227-10 644231-08 044181-04 644230-08-00-01
5.000 644228-11 644739-03 644227-11-00-01 644231-09 644740-03 644230-09-00-01
5.500 044243-12 044145-03 644227-12-00-01 644231-10 044181-06 644230-10-00-01
5.750 - - - - - -
5.875 2164172-07 2724029-06 644227-24-00-01 644231-22 2724030-06 644230-23
6.000 044243-14 044145-04 040910-09 644231-11 049291-01 644230-11
6.625 044243-15 644739-04 644227-14-00-01 644231-12 049291-02 644230-12
7.000 044243-16 044146-01 644227-15-00-01 644231-13 049291-03 644230-13
7.625 044243-17 044146-02 644227-16-00-01 644231-14 049291-04 644230-14
7.750 044243-22 044146-07 644227-17 - - -
8.625 044243-18 044146-03 644227-18 644231-15 049291-06 644230-15-00-01
9.000 044243-19 044146-04 040910-14 644231-16 049291-07 644230-16-00-01
9.625 044243-20 044146-05 644227-20-00-01 644231-17 049292-01 644230-17-00-01
10.750 044243-21 044146-06 644227-21-00-01 644231-18 049292-02 644230-18-00-01
11.750 - - - 644231-19 049292-03 644230-19-00-01
13.375 - - - 644231-20 049292-04 644230-20-00-01
13.625 - - - - -
13.750 - - - - - -
16.000 - - - - - -
3.500
044243-06 044144-05 644227-06 - - -
Aluminum
4.500
044243-08 044144-08 040910-05 - - -
Aluminum
5.000
- - - - - -
Aluminum
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
18-3/4” 21-1/4”
Pipe Size 10,000 psi 5000 and 10,000 psi
(in.) Top Seal 644232-01-00-01 Top Seal 2010939-01
Assembly Ram Packer Assembly Ram Packer
Blind 644234-01 044184-01 644233-01-00-01 044262-01 044214-01 2010851-19
1.050 - - - - - -
1.315 - - - - - -
1.660 - - - - - -
1.900 - - - - - -
2.062 - - - - - -
2.375 044254-02 044185-01 644233-02 044262-02 044215-01 2010851-01
2.875 044254-03 044185-02 644233-03-00-01 044262-03 044215-02 2010851-02
3.500 644234-04 644741-01 644233-04-00-01 44262-04 644743-01 2010851-03
4.000 044254-06 044185-05 644233-06 044262-06 044215-05 040962-04
4.500 044254-07 644741-02 644233-07 044262-07 644743-02 2010851-05
4.750 044254-09 044185-08 041856-06 044262-09 044215-08 040962-06
5.000 644234-10 644741-03 644233-10-00-01 044262-10 644743-03 2010851-07
5.500 044254-11 044185-10 644233-11-00-01 044262-11 044215-10 2010851-08
5.750 - - - - - -
5.875 644234-21 2724031-06 644233-21-00-01 044262-32 2724033-06 2010851-29
6.000 044254-13 044185-12 041856-09 044262-13 044215-12 040962-09
6.625 044254-14 044185-13 644233-13-00-01 044262-14 044215-13 2010851-10
7.000 044254-15 044185-14 644233-14-00-01 044262-15 044215-14 2010851-11
7.625 044254-16 044185-15 041856-12 044262-16 044215-15 040962-12
7.750 - - - - - -
8.625 044254-17 044185-16 041856-13 044262-17 044215-16 040962-13
9.000 044254-18 044185-17 041856-14 044262-18 044215-17 040962-14
9.625 044254-19 044185-18 644233-18-00-01 044626-19 044215-18 040962-15
10.750 044254-21 044185-21 644233-19-00-01 044262-20 044216-01 040962-20
11.750 - - - 044262-21 044216-02 2010851-20
13.375 044254-22 044185-20 644233-20-00-01 044262-22 044216-03 2010851-22
13.625 - - - 044262-24 044216-05 040962-24
13.750 - - - - - -
16.000 - - - 044262-23 044216-04 2010851-23
3.500
044254-05 044185-04 041856-16 044262-05 044215-04 040962-16
Aluminum
4.500
044254-08 044185-07 041856-17 044262-08 044215-07 040962-17
Aluminum
5.000
- - - - - -
Aluminum
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
For variable bore rams (VBR’s) and FLEXPACKER rams hang-off data, refer to Cameron Engineering
Bulletin 859D.
Hang-Off Weights
(See Cameron Engineering Bulletin EB636D)
The DS shearing blind ram can cut large diameter tubulars or multiple tubing strings regardless of
their orientation to the centerline of the ram. A blade seal between the upper and lower faces elimi-
nates the need for moving pipe after shearing.
• Large frontal area on the blade face seal reduces pressure on the rubber and increases service
life.
• Cameron SBRs can cut pipe numerous times without damage to the cutting edge.
• The single-piece body incorporates an integrated cutting edge.
• TM
CAMRAM top seals are standard for all U BOP shearing blind rams through 18-3/4”.
• For U and UII BOPs through 18-3/4”, part numbers beginning with 644XXX indicate the
CAMRAM lipped-plate design. Other part numbers may use standard elastomer material and
reinforced plates. Verify this with your Cameron representative.
• Cameron SBR’s, both with inserted and integral blades, meet the H2S requirements of both
API 16A and NACE MR-0175. Sulfide stress cracking susceptible materials are used for the
blades, however, the main body of the SBR’s are made of sulfide stress cracking resistant
materials.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Severe Service U, UL and UM BOP H2S Shearing Blind Ram Part Numbers
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
10
12
5
7 4
3 11
6
SD 034603
13-5/8”
645033-01-00-01
3000, 5000 and 2164775-01 2164773-01 *2010985-01 *2010985-02 *2010986-01 *2010986-02
(**2231241-01)
10,000
BOP Bore Size
and Working Lower Ram Body Side Side Top
Pressure (psi) Subassembly Packer Packer Seal
13-5/8”
645033-01-00-01
3000, 5000 and 2164776-01 2164774-01 *2010985-01 2010985-02
(**2231241-01)
10,000
*Cameron Blade and Side Packers qualify to API 16A, 2nd Edition Appendix C high temperature verification test requirements and success -
fully complete Cameron required additional 8 hour hold test at 250 degrees F.
**High Temp Top Seal
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
DSI rams are similar to standard DS shear rams except for the interlock feature. DSI shear rams are capable
of shearing tubing, small pipe, braided cable, slickline and solid sinker bar.
DVS rams are similar in design to the standard shearing blind rams except that both blades are V shaped
and interlocked. The DVS rams are capable of shearing tubing, small pipe, braided cable and slickline.
Top Seal
Side Packer
Upper Shear Ram
Upper
Ram Body
Blade Seal
Side Packer Upper Shear Ram
Lower Shear Ram
Top Seal
Blade Packer
Side
Packer
BOP Size and Working Pressure Pipe Size Range Ram Subassembly Ram Body Packer Top Seal
13-5/8" 3000, 5000 and 10,000 5-7/8" to 3-1/2" 2164806-01 2164404-01 2164765-01 2164807-01
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
BOP Size and Working Pressure (psi) Pipe Size Range Part Number
11” 3000, 5000 and 10,000 2-3/8” x 3-1/2” 2011740-01
11” 3000, 5000 and 10,000 3-1/2” x 5” 2163445-01
13-5/8” 3000, 5000 and 10,000 2-3/8” x 3-1/2” 2011716-01
13-5/8” 3000, 5000 and 10,000 3-1/2” x 5” 2011673-01
13-5/8” 3000, 5000 and 10,000 5” x 6-5/8” 2011688-01
18-3/4” 10,000 5” x 6-5/8” 2011907-01
18-3/4” 10,000 3-1/2” x 5” 2011701-01
Initial Ordering – Order packer assembly, which includes plastic wear insert. When insert wears out
and elastomer portion of packer is still in serviceable condition, order insert only. Modified packer
part number is for reference only and is used to define the insert pocket machined in already molded
packer. The insert is fit into this pocket.
Insert Removal – Carefully pry worn insert from cavity in packer using appropriate tool such as large
screwdriver. Once removed, install new insert using a soft mallet to drive the insert into the pocket.
Note, the insert has a pair of locking devices on the side of the insert, which engages the packer elas-
tomer and prevents insert loss.
Insert Information – The insert is designed for use in flat plate packers only. They will not fit
CAMRAM packers with top and bottom lipped plates.
CAMRAM 350 is available in all U BOP sizes in which standard CAMRAM packers and
top seals are offered.
CAMRAM packers in drill pipe sizes feature the Cameron patented lipped plate de-
sign. All packers also have chamfered ends on the top and bottom reinforcing plates
to prevent ram bore scoring and reduce elastomer extrusion.
All packers and top seals are molded using CAMLASTTM high performance elastomer
from Cameron Elastomer Technology.
20-3/4”
7-1/16” 11” 11” 13-5/8” 13-5/8” 16-3/4” 18-3/4”
3000 psi
3000-15,000 3000-10,000 15,000 3000-10,000 15,000 3000-10,000 10,000
21-1/4”
Pipe psi psi psi psi psi psi psi
2000 psi
Size
(in.) Top Seal Top Seal Top Seal Top Seal Top Seal Top Seal Top Seal Top Seal
644701-01 644703-01-00-01 644705-01 644707-01-00-01 644709-01-00-01 644711-01 644713-01-00-01 2164113-01
Packer Packer Packer Packer Packer Packer Packer Packer
Blind 644700-01 644702-01 644704-01 644706-01-00-01 644708-01 644710-01 644712-01 2164105-01
2.375 644700-07 644702-06 644704-05 644706-06-00-01 644708-03 --- --- 2164105-02
2.875 644700-08 644702-07 644704-06 644706-07-00-01 644708-04 644710-04 --- 2164105-03
3.500 644700-09 644702-08 644704-07 644706-08-00-01 644708-05-00-01 644710-05 644712-04 2164105-04
4.000 644700-11 644702-10 644704-08 644706-10-00-01 644708-07-00-01 644710-06 --- 2164105-05
4.500 644700-12 644702-11 644704-09 644706-11-00-01 644708-08 644710-07 --- 2164105-06
5.000 644700-14 644702-14 644704-10 644706-14-00-01 644708-11 644710-09 644712-10 2164105-07
5.500 644700-15 644702-16 --- 644706-16-00-01 644708-12 644710-10 644712-11 2164105-08
5.875 --- --- --- 644706-29-00-01 --- 644710-21 --- 2164105-09
6.625 --- --- --- 644706-18-00-01 644708-14 --- --- ---
7.000 --- 644702-20 --- 644706-19-00-01 644708-15-00-01 --- --- ---
7.625 --- 644702-21 644704-15 644706-20-00-01 644708-16 --- --- ---
9.625 --- --- --- 644706-24-00-01 644708-20-00-01 --- --- ---
10.75 --- --- --- --- 644708-21 --- --- ---
13.375 --- --- --- --- --- 644710-20 644712-20 2164105-17
Note: 20” and 21” packers are “Severe Service” and are technically not CAMRAM 350. They do not incorporate the lipped plate design.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
*Note: Ram Block Modification is required to enable the addition of the optional ram wear pads.
When high temperature and/or high concentrations of H2S are expected, Cameron
recommends the use of CAMLAST bonnet and connecting rod seals along with
CAMRAM 350 packers and top seals.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
The seal carrier was designed, developed and performance-verified for use in newly
manufactured BOPs or as a replacement seal assembly for BOPs where either the
BOP body or the intermediate flange requires weld repair on the sealing surfaces.
Like all other Cameron preventers, the rams in the U II BOP are pressure-energized. Wellbore pressure acts
on the rams to increase the sealing force and maintain the seal in case of hydraulic pressure loss. Seal integ-
rity is actually improved by increased well bore pressure. Other features of the U II BOP include:
• Internally ported hydraulic stud tensioning system ensures that stud loading is consistently
accurate and even.
• Bonnet seal carrier is available to eliminate the need for high makeup torque on bonnet
studs and nuts.
• Hydraulically operated locking mechanisms, wedgelocks, lock the ram hydraulically and hold
the rams mechanically closed even when actuating pressure is released. The operating system
can be interlocked using sequence caps to ensure that the wedgelock is retracted before
pressure is applied to the open BOP.
• A pressure balance chamber is used with the wedgelocks to eliminate the possibility of the
wedgelock becoming unlocked due to hydrostatic pressure.
Other features include hydraulically opening bonnets, forged body and a wide selection of rams to meet all
applications. See pages 79-81 for rams available to fit the U II BOP.
Gallons to Gallons to
Bore Size Gallons to Gallons to Gallons Gallons
Open Pipe Close Pipe Closing Opening
and Open Bonnets Close Bonnets to Unlock to Lock
Rams Rams Ratio Ratio
Working Pressure (1 set) (1 set) Wedgelock Wedgelock
(1 set) (1 set)
18-3/4”
22.3 24.7 33.7 25.2 6.8:1 2.5:1 5.5 0.66
10,000 psi
18-3/4”
32.3 34.7 43.9 35.2 9.3:1 3.5:1 5.5 0.66
15,000 psi
18-3/4”
15,000 psi 25.8 28.3 37.4 28.7 7.6:1 2.9:1 5.5 0.66
with Cylinder
U II BOP Accessories
A high-pressure, hydraulic pump system is utilized with all Cameron U II BOPs for
tensioning of the bonnet studs.
G Height of ram
E
H-1 Centerline of side outlet between rams to bottom flange face
H-2 Centerline of side outlet between rams to bottom hub face
J Top of lower ram to bottom of upper ram SD-034602
BOP Size,
A-1 A-2 B-1 B-2 B-3 C E-1 E-2
Working Pressure
(in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.)
and Body Style
18-3/4” 10,000 Single 147.000 185.500 --- 43.125 --- 42.50 20.500 13.938
18-3/4” 10,000
147.000 185.500 87.125 74.000 --- 42.50 20.500 13.938
Double
18-3/4” 15,000 Single 148.375 186.875 64.750 53.125 --- 47.25 23.875 18.062
18-3/4” 15,000
148.375 186.875 98.875 87.250 84.5 47.25 23.875 18.062
Double
BOP Size,
F-1 F-2 G H-1 H-2 J Weight
Working Pressure
(in.) (in.) (in.) (in.) (in.) (in.) (lbs.)
and Body Style
18-3/4” 10,000 Single 22.250 15.688 11.5 --- --- --- 29,950
18-3/4” 10,000
22.250 15.688 11.5 51.625 45.062 19.625 56,950
Double
18-3/4” 15,000 Single 26.625 20.812 11.5 --- --- --- 36,700
18-3/4” 15,000
26.625 20.812 11.5 58.000 52.188 22.625 69,800
Double
+ Alternate parts for 18-3/4” 15,000 psi BOP assembly with operating cylinder.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
* 4 required for 18-3/4” 10,000 psi BOP; 2 required for 18-3/4” 15,000 psi BOP.
** 8 required for 18-3/4” 10,000 psi BOP; 4 required for 18-3/4” 15,000 psi BOP.
+ Alternate parts for 18-3/4” 15,000 psi BOP assembly with operating cylinder.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
• Large frontal area on the blade face seal reduces pressure on the rubber and
increases service life.
• Cameron SBRs can cut pipe numerous times without damage to the cutting
edge.
• The single-piece body incorporates an integral cutting edge.
• CAMRAMTM top seals are standard for all U II BOP shearing blind rams.
• H2S SBRs are available for critical service applications and include a blade
material of hardened high alloy suitable for H2S service.
U II BOP Shearing Blind Ram Assemblies U II BOP H2S Shearing Ram Assemblies
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
CAMRAM 350 is available in all U II BOP sizes in which standard CAMRAM packers and top seals are
available.
Bore Size & Working Left Qty. Right Qty Screw Qty
Pressure (psi) Part Number Per Assy. Part Number Per Assy. Part Number Per Assy.
18-3/4" 10,000 -15,000 2011276-01 1 2011276-02 1 644349-01 4
Note: Ram blocks may require modification in order to utilize the wear pads. Consult your local Cameron representative.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
TC1001-04 82 © 2004 Cooper Cameron, Cameron Division
T BOP
The Cameron T blowout preventer offers a unique combination of benefits including safety, economy, reli-
ability, extended service life, reduced height and fast and easy service.
Side ram removal on the T BOP permits reduced stack height and facilitates change-out of rams and pack-
ers. Sliding the rams to the side simplifies access and handling and reduces vertical clearance requirements.
The T BOP is available in a modular design which greatly reduces stack height. The design is possible be-
cause the side ram removal feature of the T BOP allows for construction of a BOP stack with virtually no ex-
tra space between BOP body cavities. Each BOP body or module has only a slightly raised face and gasket
prep.
The design of the T is based on Cameron’s experience with the highly successful U and U II ram-type BOPs
and combines much of this proven technology including:
• Metal-to-metal bonnet gaskets increase the safety and reliability in critical service
applications.
• Hydraulic stud tensioning ensures that stud loading is consistently accurate and even.
• Hydraulically operated locking mechanisms, ST Locks, act directly on the operating piston
tailrod and are interlocked by sequence caps to ensure that the locks are unlocked/opened
before the BOP is opened.
• Bonnet studs instead of bonnet bolts reduce the need to make and break threads in the BOP
body.
• Most operating system seals can be replaced with the bonnet in the ram change position
without removing the bonnets.
• The standard T BOP has a large enough piston area to shear all commonly used sizes and
grades of drill pipe.
Other features include hydraulically opening bonnets, forged body and a wide selection of rams to meet all
applications. See pages 114-120 for rams available to fit the T BOP.
Ram opening pressure opens the rams and closes the bonnets after ram change-out. The
rams are pulled outward, close to the bonnets, before the bonnets begin moving to-
wards the preventer body. This assures that the rams never obstruct the bore or inter-
fere with pipe in the hole. Hydraulic pressure draws the bonnets tightly against the
preventer body and the bonnet studs are hydraulically tensioned to hold the bonnets
closed. Ram opening pressure is also used to automatically unlock the ST-locks.
Ram closing pressure closes the rams. When the bonnet nuts are released, closing pres-
sure opens the bonnets. When the bonnet has moved to the fully extended position, a
ram removal tray is inserted and ram opening pressure brings the rams into the clear for
removal. ST-locks are locked by applying pressure to the ST-lock lock port. This pressure
wedges a piston-like assembly into position to ensure that the rams are locked in the
closed position. An option is available where the locks are also locked automatically by
installing a sequence valve in the system.
The following designations refer to the T BOP dimensional drawings on the next page:
Style A-3 A-4 B-1 B-2 B-3 B-4 C E-1 E-2 E-3 E-4 F-1 F-2 F-3 F-4 G H J Weight
15,500
Single 124” 175.6” 43.6” 34.4” 33.5” 23.3” 32” 26.7” 22.1” 16.6” 16.6” 18” 13.4” 7.9” 7.9” 7.5” 24.6”* 24.6”
lb
27,650
Double 124” 175.6” 68.2”* 59.0”* 58.1”* -- 32” 26.7” 22.1” 16.6” -- 18” 13.4” 7.9” -- 7.5” 24.6”* 24.6”
lb
Style A-1 A-2 B-1 B-2 B-3 B-4 C E-1 E-2 E-3 E-4 F-1 F-2 F-3 F-4 G H J Weight
44,000
Single 177” 217” 64.2” 53” 49” 32.1” 47” 40.6” 35.1” 25.6” 24.6” 26.4” 20.8” 11.3” 10.3” 11.5” 34”* 34”
lb
85,000
Double 177” 217” 98.3”* 87”* 83.1”* -- 47” 40.6” 35.1” 25.6” -- 26.4” 20.8” 11.3” 10.3” 11.5” 34”* 34”
lb
E
G
B J
H
C
A-1 (Bonnets Closed)
D
A-2 (Bonnets Opened)
E
G
J
B
H
T BOP Dimensions
SD 034608
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Item Description Qty Part Number Item Description Qty Part Number
30 Bonnet 1 644630-01 59 Retaining Ring, Spirolox 1 018572-18
31 Liner, Operating Cylinder 1 644631-01 60 O-Ring, Size 360 1 702645-36-01
32 O-Ring 1 644768-02 61 Screw, 12 Pt Cap 2 702585-06-00-30
33 Operating Piston Subassembly 1 644791-01 62 Backup Ring 1 644771-01
34 Seal Ring 1 710410 63 Seal Ring 1 710369
35 Wear Ring 1 614742-08 64 Retainer Ring 1 644737-01
36 Ram Change Piston, Open 1 644637-01 65 Retaining Ring, Spirolox 1 708393
37 Ram Change Piston, Closed 1 644637-02 66 Locking Screw Housing 1 644734-01
38 Seal Ring 2 710505 67 Locking Screw 1 644733-01
39 Wear Ring 2 614742-09 68 O-Ring, Size 459 1 702645-45-91
40 Cylinder, Ram Change System 2 644640-01 69 Stud, Double Ended 4 644450-03
41 O-Ring, Size 336 2 702645-33-61 70 Nut 4 644792-01
42 Gland, Ram Change System 2 644641-01 71 Button 1 644635-01
43 Backup Ring 2 644381-06 72 Inner Seal, Hydraulic Bonnet Stud Piston 4 644651-01
44 Seal Ring 2 710504 73 Inner Seal, Hydraulic Bonnet Nut 4 644438-02
45 O-Ring, Size 341 2 702645-34-11 74 Outer Seal, Hydraulic Bonnet Nut 4 644439-02
46 Seal Retainer, Ram Change System 2 644642-01 75 Spacer Ring, Hydraulic Bonnet Stud 4 644650-01
47 Cylinder Head, Ram Change System 2 644643-01 76 O-Ring, Size 362 4 702645-36-22
48 O-Ring, Size 338 2 702645-33-81 77 Retaining Ring, Spirolox 4 033186-05
49 Insert, Bonnet Gasket 1 644644-01 78 Gland 2 017454-46
50 Screw, 12 Pt Cap 12 702585-14-00-26 79 Blind Plug 2 017454-36
51 Backup Ring 2 644381-05 80* Check Valve 1 709493
52 Seal Ring 1 710430 81* Bleeder Plug Assembly 1 640202-02
53 Seal Carrier 1 644726-01 82* High Pressure Plug 4 615684-02
54 O-Ring, Size 352 1 702645-35-21 83* O-Ring, Size 113 4 702645-11-31
55 Seal Ring 1 609745-14 84 Tubing Connector 1 707276
56 Backup Ring 1 644381-04 85 Male Quick-Disconnect 1 708490-01
57 Seal Ring 1 710429
58 Retainer Ring 1 644648-01 *Not Shown
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
TC1001-04 88 © 2004 Cooper Cameron, Cameron Division
18-3/4” 15,000 psi WP T BOP Part Numbers
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Item Description Qty Part Number Item Description Qty Part Number
30 Bonnet 1 644414-03 56 Spacer Ring, Connecting Rod 1 644355-01
31 Liner, Operating Cylinder 1 644470-01 57 Ret. Ring, Primary Conn. Rod Seal 1 644356-01
32 O-Ring, Size 387 1 702645-38-71 58 Retaining Ring, Spirolox 1 709503
33 Operating Piston Subassembly 1 644483-04 59 O-Ring, Size 453 1 702645-45-31
34 Seal Ring 2 709635 60 Seal Sub, Blind 2 644491-02
35 Wear Ring 1 614742-06 61 O-Ring, Size 214 4 702645-21-41
36 Ram Change Piston, Open 1 644301-01 62 Screw 12 Pt Cap 2 702585-06-00-42
37 Ram Change Piston, Close 1 644301-02 63 Stud, Double Ended 4 644450-01
38 Seal Ring 2 709632 64 Cap Nut 4 644447-01
39 Wear Ring 2 614742-05 65 ST-Lock Assembly 2 645021-01
40 Cylinder, Ram Change System 2 615685-01 69 Gland, Tubing 2 017454-46
41 O-Ring, Size 348 2 702645-34-81 70 Blind Plug 2 017454-36
42 Gland, Ram Change System 2 615711-01 71* Valve, Check 1 709493
43 Backup Ring 2 644381-03 73 High Pressure Plug 4 615684-02
44 Seal Ring 2 709633 74 O-Ring, Size 113 4 702645-11-31
45 O-Ring, Size 428 2 702645-42-81 75 Connector, Tubing 1 707276
46 Seal Retainer, Ram Change System 2 615712-01 76 Male Quick-Disconnect 1 708490-01
47 Cylinder Head, Ram Change System 2 615713-01 77 Button 1 615706-01
48 O-Ring, Size 425 2 702645-42-51 78 Inner Seal, Hydraulic Bonnet Nut 4 644438-01
49 Insert, Bonnet Gasket 1 644358-03-00-01 79 Spacer Ring, Hydraulic Bonnet Stud 4 644359-01
50 Screw, 12 Pt Cap 12 702585-14-00-20 80 Outer Seal, Hydraulic Bonnet Nut 4 644439-01
51 Backup Ring 3 644381-02 81 Piston, Hydraulic Bonnet Stud 4 615709-01
52 Seal Ring 2 709631 82 O-Ring, Size 377 4 702645-37-71
53 Wear Ring 1 644443-01 83 Retaining Ring, Spirolox 4 709636
54 Backup Ring 1 644381-01
55 Seal Ring 1 709630 *Not Shown
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
• Bonnet seal carrier eliminates the need for high make-up torque on bonnet studs and nuts.
• Bonnet studs rather than bonnet bolts eliminate the need to make and break threads in the BOP body.
• Side ram removal reduces stack height and simplifies ram change-out.
• Access caps on the ram change pistons enable easier access and bonnet removal.
• Most operating system seals can be replaced with the bonnet in the ram-change position without removing
the bonnets because the operating cylinder and ram-change cylinders fit between the bonnet and end flange
with tie-bolts holding the assembly together.
• Piston area is large enough to shear most commonly used sizes and grades of drill pipe.
• Wear pads are included on the bottom of all TL BOP rams.
• Available in 13-5/8” 10,000 psi WP and 18-3/4” 5000, 10,000 and 15,000 psi WP sizes with many body
configurations.
TL Custom Features:
• Choice of manual and hydro-mechanical locking devices, including manual lock screws, wedgelocks (5000 psi
WP only), ST-Locks or RamLocks .
• Choice of locking device operation/manual, semi-automatic or automatic operation.
• Choice of several styles of bonnets for increased shearing capabilities such as:
• Tandem Boosters to shear large, extra-heavy wall casing.
• Super Shear bonnets fitted with non-sealing super shear rams for shearing drill collars and large casing.
• Inconel inlays for critical sealing components.
Due to the extensive variety of custom features, no TL BOP part numbers are included in this publication. Please refer to the opera-
tion and maintenance manual supplied with your TL BOP for specific replacement part numbers.
RAM Lock
3 2 5 6 7 11 1 15 14
Reference Page 94
ST Lock
4
Reference Page 98
Wedgelock
9 8 12 13 19 20 10
Super Shear
SD 034630
Qty Qty
Item Description
Single Double
1 1 1 Body
**2 8 16 Bonnet Stud (Tandem Booster uses different arrangement - See TB Bonnet)
3 8 16 Bonnet Cap Nut
4 2 4 Ram Guide Pin
5 2 4 Bonnet Seal Carrier
*6 4 8 Bonnet Seal
*7 2 4 Retainer Ring (Seal Carrier)
8 8 16 Pipe Plug, Threaded Hex Socket - N/A for MLS
*9 4 8 Seal Ring
10 1 2 Bonnet Subassembly, Right Hand
11 1 2 Bonnet Subassembly, Left Hand
12 1 1 Name Plate
13 1 1 Name Plate
14 *** *** Stud, Double Ended
15 *** *** Nut, Heavy Hex
16 *** *** Bushing (Not Shown)
17 1 1 Adhesive Primer, 4.50 oz. (Not Shown)
18 1 1 Adhesive, Loctite 277 (Not Shown)
19 *** *** Stud, Double Ended
20 *** *** Nut, Heavy Hex
Accessory Items
1 1 Removal Tool, Bonnet Seal Carrier
2 2 Ram Tray Assembly
4 8 Bonnet Extension Rod - N/A for tandem Booster
Expendable Items
4 8 Gasket Subassembly, AX
2 2 Gasket Subassembly, CX-18
1 1 Paste, #503 Molybdenum Disulfide 4.0 lb. Can
2 2 Adhesive, Loctite 242, 250 ml. Tube
1 1 Sealant, Thread-Loctite 567, 50 ml. Tube
1 Gal 1 Gal Ram Lube, Chemola
1 Gal 1 Gal Fluid, Hydraulic Equipment Preservation
* Included in seal kit
** Tandem Booster uses different Bonnet Stud arrangement - See Tandem Booster Bonnet
*** Quantity based on bore size and working pressure
Item numbers shown in the catalog may or may not correspond to the item numbers shown in your rig
books.
*Flange x Flange
**With RamLocks and Super Shears
† With ST-Locks
Unless otherwise noted, all weights are for flanged x studded body styles
*With ST-Locks
45
43
46
24
26
48
47
45
43
46
24
26
48
47
Item numbers shown in the catalog may or may not correspond to the item numbers shown in your rig book.
13
15
12
10
17
2
25
26
30 4
5
29
1
6 11
19
7 19
18
9
SD 034624
27
28
9
8
Item numbers shown in the catalog may or may not correspond to the item numbers shown in your rig
books.
10
17
11
19
19
18 13
15
5 12
1 17
SD 034620
3
6
9
8
2
4
Item numbers shown in the catalog may or may not correspond to the item numbers shown in your rig
books.
19 44 8 7 8 15 34 35 36 31 31 9
27 45 8 7 8 17 16 14 1 40 15 14 13 18 11 12 10
33 6 6 22 20 34 35 36 23 25 26 28 2 29 29 32 4 46 30 5 30 21
33 39 38 37 24 32 3 46 30 5 30
41
SD 034614
Note: Some Cylinders (19) use O-Rings (27) on each end and will not accept rings (44) and (45).
Item numbers shown in the catalog may or may not correspond to the item numbers shown in your rig
books.
10
1
15
ST-Lock Assembly Components 27
ST Lock Assembly
SD 034627
24
Sequencing Valve
Subassembly Components
4
2 1 Compression Spring 2
3 1 Valve Seat
1
4 1 Actuator
*5 1 O-Ring
*6 1 O-Ring 3
7 1 Liner
*8 2 O-Ring 5
9 1 Compression Spring 8
10 1 Cap
12
11 4 Hex Head Cap Screw
12 1 Body 14
*13 1 O-Ring
16
14 1 Balance Piston 17
8
15 1 Poppet Stop
9
*16 1 O-Ring
15
*17 1 O-Ring
*24 1 O-Ring 10
** 1 Sealant/Lubricant
Sequencing Valve
SD 034597
46
48
50 49 47
43 43
42
52 Vent Port 41
44 25 Typ 2
Places
26
27 45 31
30
24
32
28 23
3
29
2 30
54
19
2 Places
18
16
38
17
16 51 2 Places 7
15
13
60
14
61
12
35 35
6
11
36 33
37
Bleed Plug 60
Shown out of
Position 61 4 Ram Change Piston `Open’
(Shown Out Of Position to Show
Hydraulic Porting)
5 Ram Change Piston `Close’
(Not Shown)
46
40
`A’ 41
39
25 `A’
26
Typ 8 Places
24 38
45
42 44
27 43
33
28 35
29
37
Typ 2
Places
7
30
62
40
32
41
23
19 18 3
16 17 35
6
64
Typ 2 31 36
16 Places 40
63
15 41 Typ
62 2 Places
20
4 Ram Change Piston `Open’
13
14 5 Ram Change Piston `Close’
11 12
Section `A-A’
SD 034618
Item numbers shown in the catalog may or may not correspond to the item numbers shown in your rig books.
SD 034623
• Cameron pipe rams are self-feeding and incorporate a large reservoir of packer
rubber to ensure a long-lasting seal under all conditions.
• Ram packers lock into place and are not dislodged by well flow.
• Wear pads are included on all T and TL Rams.
Note: Cameron TL BOP rams can be used in the TL & T BOPs. For 18-3/4” T BOP ram as-
semblies with a base number of 644457 and/or ram block number of 644479, please
contact your Cameron Representative. These ram blocks may need to be modified
for use in the Cameron TL BOP.
Note: Cameron TL BOP rams can be used in the TL & T BOPs. For 18-3/4” T BOP ram assemblies with a base number of 644457 and/or
ram block number of 644479, please contact your Cameron Representative. These ram blocks may need to be modified for use in the
Cameron TL BOP.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Cameron TL BOP Rams can be used in the TL & T BOPs. For 18-3/4" T BOP ram assemblies with a base number of
644457 and/or ram block number of 644479, please contact your Camron Representative. These ram blocks may need to be
modified for use in the Cameron TL BOP.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
of 644479, please contact your Cameron Representative. These ram blocks may need to be modified for use in the Cameron TL BOP.
Note: The second set of dash numbers in the assembly and ram block part numbers covers specifications such as ABS, DNV, etc. Verify with your local
Cameron Representative.
CAMRAM packers and top seals are standard for all T and TL BOP variable bore rams. The variable
bore ram packer contains steel reinforcing inserts similar to those in the Cameron annular BOP
packer. The steel inserts rotate inward when the rams are closed so that the steel provides support for
the rubber which seals against the pipe.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
*Note: Ram Block may require modification in order to utilize the wear pads. Consult your Cameron Representative.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
44.41”
5.50”
15.75”
SD 017962
C BOP Dimensions
2 7
111
112 1
10
9
72
73 78
76 75
74
81 11
80
83
4
84
89
77
79 84
129
71
82
90
91
92
6
85
93 88
86
126
5 87
127
3
113 110
116
94 106 117
103 102
112
98
99
118
101
SD 034607
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
24
Sequencing Valve 4
Subassembly Components
6
Item Qty Description
2
1 1 Poppet, Metal-to-Metal Seal
2 1 Compression Spring 1
3 1 Valve Seat
4 1 Actuator 3
5 1 O-Ring
6 1 O-Ring
5
7 1 Liner
8
8 2 O-Ring
9 1 Compression Spring 12
10 1 Cap
14
11 4 Hex Head Cap Screw
16
12 1 Body 17
13 1 O-Ring 8
14 1 Balance Piston 9
15 1 Poppet Stop 15
16 1 O-Ring
10
17 1 O-Ring
24 1 O-Ring
* 1 Sealant/Lubricant
11
*Not Shown
Sequencing Valve
SD 034597
* Not Shown
1
5
10 7 8
3 4
SD 034604
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Outside
Material Sheared Specifications Quantity
Diameter
Slickline 0.108” Without Tension 1
Slickline 0.108” Without Tension 10
Sinker Bar 2” 4230 Steel 1
Drill Pipe 3.5” S-135, 13.3 ppf 1
Hepta Cable 15/32” 500 lb Minimum Tension 1
Fiberspar Coiled Tubing 3” 500 lb Minimum Tension on One String 2
Fiberspar Coiled Tubing 3” 2000 lb Compression on One String 2
Tubing 1.25” 0.109” Wall Thickness 10
0.188” wall thickness with a strand of 15/32” OD cable in
Tubing 2” each string and at least 500 lb of tension on one of the tubing 3
strings
0.188” wall thickness with a strand of 15/32” OD cable in
Tubing 2” each string and at least 9500 lb of compression imparted on 3
one of the strings
0.188” wall thickness with a strand of 15/32” OD cable in
Tubing 2-7/8” each string and at least 19,500 lb of compression on one of the 2
strings
0.188” wall thickness with a strand of 15/32” OD cable in
Tubing 2-7/8” 2
each string and at least 500 lb of tension on one of the strings
Tubing 4.5” 15 ppf 1
Perforating Gun 4.5” --- 1
Screen Assembly 4-5/8” gravel pack with 2-3/8” wash pipe inside 1
Cable 7-16” Without Tension 10
Tubing 4” 13 Chrome L-80 1
Drill Pipe 3-1/2” E-75 17.5 ppf 1
Note: All shearing tests have been documented and are available in EB 862D.
Four types of ram bodies are available for the 4-1/16” 10,000, 15,000 and 25,000 psi
S/QRC and 4-1/16” 5000 and 10,000 psi G-2 BOPs. These include blind, pipe, shear
and wireline rams. Pipe rams can be fitted with safety packers, wear insert packers
or slip inserts. Blind and pipe rams are available for all sizes.
Features include:
• Safety packers seal around tubing in the well bore. Tubing can be stripped or
snubbed through these packers, if necessary.
• Wear insert packers are for stripping and snubbing service. These subassemblies
have a wear insert which can be easily replaced to renew the packer.
• Slip inserts are used to hold the tubing string after shearing or during workover
operations by supporting upward and downward forces as well as tortional
forces.
• Wireline ram guides have hardened steel guiding surfaces and are replaceable.
• No special operating system is required for shearing.
• All S/QRC and G-2 rams are suited for H2S service per NACE MR-01-75.
BOP Shear Ram Assembly* Upper Ram Body Lower Ram Body
Description Qty Part Number Qty Part Number Qty Part Number
4-1/16” 5000 and
10,000 psi 1 614411-01 1 614402-02 1 614402-01
G-2
4-1/16” 10,000
and 15,000 psi 1 614411-01 1 614402-02 1 614402-01
S/QRC
BOP Shear Blade Blade Retainer Bolts
Description Qty Part Number Qty Part Number Qty Part Number
4-1/16” 5000 and
10,000 psi 2 614413-01 2 614414-01 4 702585-14-00-24
G-2
4-1/16” 10,000
and 15,000 psi 2 614413-01 2 614414-01 4 702585-14-00-24
S/QRC
*Shear ram assembly includes upper and lower shear rams.
Wireline Wireline Ram Upper Ram Lower Ram Top Wireline Wireline
Size Assembly* Body Body Seal Packer Guide
(in) (1 required) (1 required) (1 required) (2 required) (2 required) (2 required)
0 - 0.250 614263-06 614236-01 614235-01 046950 046941-10 614264-01
0.312 614263-01 614236-01 614235-01 046950 046941-05 614264-01
0.438 614263-02 614236-02 614235-02 046950 046941-06 614264-02
0.562 614263-03 614236-03 614235-03 046950 046941-07 614264-03
0.750 614263-04 614236-04 614235-04 046950 046941-08 614264-04
0.875 614263-05 614236-05 614235-05 046950 046941-09 614264-05
*Wireline ram assembly includes upper and lower wireline rams.
**Screw part number: 702507-06-00-06.
The Cameron DL BOP is available in sizes from 7-1/16” to 21-1/4” and in working pressures from 2000 to
20,000 psi.
Item
Description Item Number Description
Number
1 Body 43 Stud*
2 Top 44 Nut*
3 Piston 45 Bushing Retaining Screw
4 Inner Cylinder Head 46 Oil Injection Fitting
5 Outer Cylinder Head 47 Lifting Eye*
6 Pusher Plate 50 Support Plate Bearing Ring
7 Donut and Packer** 51 Piston ID Bearing Ring
9 Lock Ring 52 Inner Cylinder OD Bearing Ring
10 Actuator Ring 53 Outer Cylinder ID Bearing Ring
11 Actuator Screw 54 Piston OD Bearing Ring
12 Actuator Screw Bushing 55 Pusher Plate Bearing Ring
13 Outer Cylinder Lock Segment 56 Outer Cylinder ID Wiper Ring
14 Lock Segment Retaining Ring 57 Inner Cylinder OD Wiper Ring
15 Support Plate 58 Inner Cylinder ID Lip Seal
16 Top Trash Seal 59 Inner Cylinder ID Lip Seal
17 Actuator Screw Bearing 60 Inner Cylinder OD Lip Seal
29 Anchor Shackle 61 Piston ID Lip Seal
30 Inner Cylinder Stud 62 Piston OD Lip Seal
31 Inner Cylinder Nut 63 Outer Cylinder ID Lip Seal
32 Stud* 64 Outer Cylinder OD Lip Seal
33 Nut* 65 Outer Cylinder OD Lip Seal
34 Lock Ring Access Port Plug 66 Top ID Lip Seal
35 Hydraulic Port Plug 67 Top OD Lip Seal
36 Pusher Plate Screw 68 Outer Cylinder ID Lip Seal
37 Actuator Ring Stop Screw 69 Inner Cylinder OD Lip Seal
38 Lifting Eye* 75 Inner Cylinder ID Backup Ring*
39 Lifting Eye* 76 Inner Cylinder OD Backup Ring*
40 Lifting Eye* 77 Outer Cylinder ID Backup Ring*
41 Lifting Eye* 78 Top ID Backup Ring*
42 Lifting Eye*
A complete replacement kit for seals, bearings and scrapers is available. See pages 153-154 .
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.
If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.
Kit parts are shrink-film packed to prevent loss and assure long shelf life and are less
expensive than individual parts. All parts in each kit are identified with part num-
bers and parts list index numbers.
As an optional replacement for the standard lip seal design, a D-shaped seal is avail-
able for service in annular BOPs that have pitted, corroded or oversized seal grooves.
To enhance the performance life of the used annular BOP, this seal design will fill
most voids created by excessive wear and tear to the seal groove. Seal kits have been
created which include all the operating system seals for the annular BOPs listed be-
low.
Annular BOP Replacement Part Kit Part Numbers
BOP Size Pressure Rating (psi) Replacement Kit “D” Seal Kit
7-1/16” 3000, 5000 049742-01 ---
7-1/16” 10,000 049742-02 ---
7-1/16” 15,000 049742-13 ---
7-1/16” 20,000 049742-03 ---
11” 3000, 5000 049742-09 ---
11” 10,000 049742-10 ---
11" 15,000 049742-14 ---
13-5/8” 5000 049742-11 2010006-01
13-5/8” 10,000 049742-12 2010006-05
16-3/4” 3000, 5000 049742-08 ---
18-3/4” 5000 049742-16 2010006-04
18-3/4" (Dual) 5000 049742-16-01 2010006-04
18-3/4” 10,000 049742-17 2010006-03
20-3/4” 3000 049742-18 ---
21-1/4” 2000 049742-18 ---
21-1/4" 5000 049742-18 ---
Item
Quantity Description
Number
16 1 Top Trash Seal
17 8 Actuator Screw Bearing
50 1 Inner Cylinder Head Ring
51 1 Bearing
52 1 Bearing
53 1 Bearing
54 1 Bearing
55 1 Wear Ring
56 1 Wiper Ring
57 1 Wiper Ring
58 1 Seal Ring
59 1 Seal Ring
60 2 Seal Ring
61 1 Seal Ring
62 1 Seal Ring
63 2 Seal Ring
64 1 Seal Ring
65 1 Seal Ring
66 1 Seal Ring
67 1 Seal Ring
**Packer is designed for the 18-3/4" 10,000 DL Annular, but is not rated for 10,000 psi service.
Pressure testing of the packing element is limited to 5000 psi on 5" and 6-5/8" drill pipe mandrels.
Higher Temperatures
For temperatures greater than 250OF, and high H2S levels, CAMULAR severe service
elastomer is recommended. The DL Annular BOP packing element comes only as a
complete subassembly, which includes packer and donut. Contact your local
Cameron representative for details. CAMULAR part numbers are listed on pages
129-136. Please contact your local Cameron Representative for severe service packer
information.
Bearing Ring
Load Ring
Nut
Washer Detail
SD 034626
Clamp
Bearing
Bore Size Seal Clamp Part No. Bolt Nut Load Ring Safety Cameron
Ring
and Ring Assembly 644021 Part No. Part No. Part No. Part No. Hoist Wrench
Working Pressures Number Part No. (2 Reqd) (4 Reqd) (8 Reqd) (8 Reqd) (8 Reqd) Part No.
(psi) RX BX AX CX
9" 5000 50 157 ——- —- 615236-08 ( )-08 702533-13-11-32 2709000-14-01 697491-10 697492-10 ——- 713114-08
9" 10,000 49 157 ——- —- 615236-10 ( )-10 702533-14-11-61 2709000-15-01 697491-11 697492-11 * 713114-09
11" 3000 53 —- 041700-06 —- 615236-09 ( )-09 702533-12-11-30 2709000-13-01 697491-09 697492-09 * 713114-07
11" 5000 54 158 041700-08 —- 615236-10 ( )-10 702533-14-11-61 2709000-15-01 697491-11 697492-11 * 713114-09
11" 10,000 —- 158 041700-08 —- 615236-22 ( )-22 702533-19-11-80 2709000-19-01 697491-12 697492-12 ** 713114-13
11" 15,000 —- 158 ——- —- 615236-15 ( )-15 702533-21-11-91 2709000-20-01 697491-04 697492-04 ** 713114-14
11" 20,000 —- —- —- —- 615236-28 ( )-28 702533-25-12-60 049800-11 697491-01 697492-01 *** ——-
13-5/8" 3000 57 —- 041700-11 —- 615236-11 ( )-11 702533-12-11-50 2709000-13-01 697491-09 697492-09 * 713114-07
13-5/8" 5000 57 160 041700-13 —- 615236-13 ( )-13 702533-19-12 2709000-19-01 697491-12 697492-12 ** 713114-13
13-5/8" 10,000 57 159 041700-15 13 615236-15 ( )-15 702533-21-11-91 2709000-20-01 697491-04 697492-04 ** 713114-14
13-5/8" 15,000 —- 159 ——- 13 615236-28 ( )-28 702533-25-12-60 049800-11 697491-01 697492-01 *** ——-
16-3/4" 2000 65 —- 041700-17 —- 615236-12 ( )-12 702533-12-11-50 2709000-13-01 697491-09 697492-09 * 713114-07
16-3/4" 3000 66 —- ——- —- 615236-14 ( )-14 702533-14-11-81 2709000-15-01 697491-11 697492-11 * 713114-09
16-3/4" 5000 —- 162 041700-19 —- 615236-19 ( )-19 702533-21-12-32 2709000-20-01 697491-04 697492-04 ** 713114-14
16-3/4" 10,000 —- 162 ——- —- 615236-28 ( )-28 702533-25-12-60 049800-11 697491-01 697492-01 *** ——-
18-3/4" 10,000 —- 164 ——- 18 615236-27-00-04 ( )-27-00-05 707902 2709000-23-01 697491-03 697492-03 *** ——-
18-3/4" 15,000 —- 164 ——- 18 615236-26 ( )-26 709446 644076-01 697491-02 697492-02 *** ——-
18-3/4" 15,000+ (HBC) —- 164 ——- 18 615236-32 ( )-32 644970-01-00-01 645015-01 697491-14* 697492-14* *** ——-
20-3/4" 2000 73 —- ——- —- 615236-18 ( )-18 702533-19-12 2709000-19-01 697491-12 697492-12 ** 713114-13
20-3/4" 3000 74 —- ——- —- 615236-18 ( )-18 702533-19-12 2709000-19-01 697491-12 697492-12 ** 713114-13
21-1/4" 2000 73 —- ——- —- 615236-18 ( )-18 702533-19-12 2709000-19-01 697491-12 697492-12 ** 713114-13
21-1/4" 5000 —- 165 ——- 21 615236-27-00-04 ( )-27-00-05 707902 2709000-23-01 697491-03 697492-03 *** ——-
21-1/4" 7500 —- 166 ——- 21 615236-26 ( )-26 709446 644076-01 697491-02 697492-02 *** ——-
21-1/4" 10,000 —- 166 ——- 21 615236-26 ( )-26 709446 644076-01 697491-02 697492-02 *** ——-
24-1/4" 1000 —- —- ——- —- 615236-21 ( )-21 702533-11-11-50 2709000-12-01 697491-08 697492-08 * 713114-06
30-1/2" 1000 —- —- ——- —- 615236-20 ( )-20 702533-13-11-70 2709000-14-01 697491-10 697492-10 *** 713114-08
34" 1000 —- —- ——- —- 615236-24 ( )-24 702533-14-11-80 2709000-15-01 697491-11 697492-11 *** 713114-09
36" 1000 —- —- ——- —- 615236-23 ( )-23 702533-19-12-12 2709000-19-01 697491-12 697492-12 *** 713114-13
Part Number
Top Total Casing
Cup Pressure
and Load
Area Sq. In.
Complete
Bottom Capacity ** Weight Cup Mandrel Sub O-Ring
Size Assembly
Connection Range lb/ft
4-1/2" All 9.5 030594-01 030591
2-3/8" Int Flush 270,000 lb 5" All 12.4 030594-02 030592 030589 030590 702645-22-01
5-1/2" All 16.0 030594-03 030593
6-5/8" All 18.6 030605-01 030597
7" 17 - 26 23.5 030605-02 030598-02
3-1/2" Int Flush 500,000 lb 7" 29 - 38 20.4 030605-03 030598-01 030595 030596 702645-33-41
7-5/8" 24 - 26.4 28.8 030605-04 030599-01
7-5/8" 29.7 - 39 27.5 030605-05 030599-02
8-5/8" 24 - 36 32.5 030600-03 030606-02
8-5/8" 40 - 49 29.4 030600-04 030606-01
9-5/8" 32.3 - 40 44.1 030600-01 030601-01
9-5/8" 43.5 - 53.5 42.4 030600-02 030601-02
10-3/4" 32.75 - 51 63.8 030600-05 030607-01
4-1/2" Int Flush 800,000 lb 10-3/4" 55.5 - 65.7 58.9 030600-06 030607-02 030603 030604 702645-34-41
13-3/8" 48 - 61 109.5 030600-07 030579-02
13-3/8" 68 - 72 103.3 030600-08 030579-01
16" All 165.0 030600-09 030584
18-5/8" All 230.0 30600-12 674819
20" 78.6 - 129.3 300.0 30600-10 033543
* Threads per API Std. 7, box up, pin down. Testers with other thread sizes are available at extra cost.
When other threads are used, a check should be made to see if total load capacity of tester is reduced.
** Total load capacity equals cup pressure area times test pressure, plus weight of suspended pipe.
*** Cups with special reinforcing can be provided for any size and weight of casing to hold test pressure up to 15,000 psi.
The Cameron Commerce function of TRANSACT offers an online, 24/7 purchasing tool for quality
Cameron equipment. Specify a system. Create an inquiry. Track an order. Buy a replacement part.
Obtain a budget quote. Check inventory status. All online. All available now. Simply create your
TRANSACT account, click on the Cameron Commerce icon, and you have online access to the indus-
try’s first true e-commerce site and a wealth of valuable information becomes available—right at your
fingertips.
Once registered, a customized welcome screen provides a gateway to all functions. In addition, this
screen also provides a message center to relay important information to specific customers.
From here, clicking on the Cameron Commerce icon takes you to the Dashboard—the hub of the
Cameron Commerce application. It is the primary working area where you can access a recent list of
inquires, quotes and orders as well as check availability and pricing of parts.
• Create an Inquiry – The inquiry function contains all elements needed to produce a budgetary
quote including online tools such as search parts, flange slide rule, actuator sizing and BOP
shear calculators.
• Convert an Inquiry to a Quote or Order – Once an inquiry has been built, it can easily and
quickly be submitted to the Cameron sales force for formal acknowledgment and quotation
or ordering.
• Quote and Order – Review the status of all orders, confirm price and availability.
• Search for a Template – The template function allows you to search for pre-configured,
pre-approved systems or assemblies. A template may be a fully functional assembly or a
collection of spare parts for a particular product.
Many other functions are available such as check order status, copy an existing quote or order to a
new inquiry.