9709 Y20-22 SW Pure2 v2
9709 Y20-22 SW Pure2 v2
Version 2
In order to help us develop the highest quality resources, we are undertaking a continuous programme of review; not only to measure the success of
our resources but also to highlight areas for improvement and to identify new development needs.
We invite you to complete our survey by visiting the website below. Your comments on the quality and relevance of our resources are very important
to us.
www.surveymonkey.co.uk/r/GL6ZNJB
Would you like to become a Cambridge consultant and help us develop support materials?
www.cambridgeinternational.org/cambridge-for/teachers/teacherconsultants/
UCLES retains the copyright on all its publications. Registered Centres are permitted to copy material from this booklet for their own internal use. However, we
cannot give permission to Centres to photocopy any material that is acknowledged to a third party, even for internal use within a Centre.
Scheme of Work
Contents
Contents................................................................................................................................................................................................................................................... 3
Introduction............................................................................................................................................................................................................................................... 4
2.1 Algebra............................................................................................................................................................................................................................................... 7
2.2 Logarithmic and exponential functions................................................................................................................................................................................................ 9
2.3 Trigonometry..................................................................................................................................................................................................................................... 12
2.4 Differentiation.................................................................................................................................................................................................................................... 14
2.5 Integration......................................................................................................................................................................................................................................... 17
2.6 Numerical solution of equations........................................................................................................................................................................................................ 19
Scheme of Work
Introduction
The Cambridge International AS & A Level Mathematics 9709 scheme of work has been designed to support you in your teaching and lesson planning. The Scheme
of Work has been separated into six documents, one for each content section: Pure Mathematics 1, Pure Mathematics 2, Pure Mathematics 3, Mechanics,
Probability & Statistics 1 and Probability & Statistics 2. This document relates only to Pure Mathematics 2.
Making full use of this scheme of work will help you to improve both your teaching and your learners’ potential. It is important to have a scheme of work in place in
order for you to guarantee that the syllabus is covered fully. You can choose what approach to take and you know the nature of your institution and the levels of
ability of your learners. What follows is just one possible approach you could take and you should always check the syllabus for the content of your course.
Suggestions for independent study (I) and formative assessment (F) are also included. Opportunities for differentiation are indicated as Extension activities; there is
the potential for differentiation by resource, grouping, expected level of outcome, and degree of support by teacher, throughout the scheme of work. Timings for
activities and feedback are left to the judgement of the teacher, according to the level of the learners and size of the class. Length of time allocated to a task is
another possible area for differentiation.
Key concepts
This scheme of work is underpinned by the assumption that mathematics involves the application of logical methodologies, problem solving and the recognition of
patterns, as well as the application of these approaches to mathematical modelling. The key concepts are highlighted as a separate item in the new syllabus and you
should be aware that learners will be assessed on their direct knowledge and understanding of the same. Learners should be able to describe and explain the key
concepts as well as demonstrate their ability to apply them to novel situations and evaluate them. The key concepts for Cambridge International AS & A Level
Mathematics are:
Key Concept – Problem solving
Key Concept – Communication
Key Concept – Mathematical modelling
See the syllabus for detailed descriptions of each Key Concept.
2.2 Logarithmic and exponential functions It is recommended that this should take about 14 hours. 2
2.6 Numerical solution of equations It is recommended that this should take about 10 hours. 6
Resources
You can find the endorsed resources to support Cambridge International AS & A Level Mathematics on the Published resources tab of the syllabus page on our
public website here.
Endorsed textbooks have been written to be closely aligned to the syllabus they support, and have been through a detailed quality assurance process. All
textbooks endorsed by Cambridge International for this syllabus are the ideal resource to be used alongside this scheme of work as they cover each
learning objective. In addition to reading the syllabus, teachers should refer to the specimen assessment materials.
Websites
This scheme of work includes website links providing direct access to internet resources. Cambridge Assessment International Education is not responsible for the
accuracy or content of information contained in these sites. The inclusion of a link to an external website should not be understood to be an endorsement of that
website or the site's owners (or their products/services).
The website pages referenced in this scheme of work were selected when the scheme of work was produced. Other aspects of the sites were not checked and only
the particular resources are recommended.
5
Scheme of Work
How to get the most out of this scheme of work – integrating syllabus content, skills and teaching strategies
We have written this scheme of work for the Cambridge International AS & A Level Mathematics 9709 syllabus and it provides some ideas and suggestions of how to
cover the content of the syllabus. We have designed the following features to help guide you through your course.
Independent
study (I) gives
your learners
the
Extension activities provide your opportunity to
more able learners with further develop their
challenge beyond the basic content own ideas and
of the course. Innovation and understanding
independent learning are the basis with direct
of these activities. input from
you.
2.1 Algebra
To introduce the notation, start with a numerical value, e.g. –5, and discuss the meaning of . Help learners to
understand the meaning of ,
sketch the graph of y = |ax + b| and deduce the results ⇔ and ⇔a – b < x < a + b as part of a class discussion.
use relations such as
Four extremely useful files are at: www.tes.co.uk/teaching-resource/a-level-maths-c2-modulus-function-worksheets-
⇔ and 6146818 (log in for free download):
‘The Modulus Function Introduction’ provides a worksheet for learners to complete. (I)
⇔a – b < x < a + b, e.g. ‘Solving Modulus Equations and Inequalities’ could be used for consolidation/practice. (I)
, ‘Modulus Transformations’ provides practice at sketching graphs involving a modulus. You could demonstrate some
when solving equations and initially to learners using a graph plotter. (I)
inequalities; ‘Alternative Methods for Solving Modulus Equations’ is a worksheet which helps learners to explore the different
ways of solving this type of equation. (I)
graphs of and
for non-linear functions f are not Learners investigate the connection between the shape of the graph of y = ax + b and the shape of the graph of
included by plotting a range of these using graphing software.
divide a polynomial, of degree not There are several different methods of polynomial division including inspection, the table method, and long division. This
exceeding 4, by a linear or PowerPoint presentation introduces all three methods for factorising cubics. You can use the methods for any
quadratic polynomial, and identify polynomial and also for division that results in a remainder:
the quotient and remainder (which www.furthermaths.org.uk/files/sample/files/edx/Factorising_cubics.ppt
may be zero)
When teaching any of the methods, start with a numerical example to remind learners of the thought process they need,
and use this to introduce the terms ‘quotient’ and ‘remainder’. For example, leads to a quotient of 6845 and a
remainder of 3. Continue with a simple algebraic example which leads to a quotient of and a
remainder of –3. You will probably need to show learners further examples involving more complex polynomials before
7
Scheme of Work
Ideas on possible approaches you can take for long division are at:
www.khanacademy.org/math/algebra2/polynomial_and_rational/dividing_polynomials/v/dividing-polynomials-with-
remainders and www.mathsisfun.com/algebra/polynomials-division-long.html
A worksheet of examples for practising any of the methods for division is at:
www.mathworksheetsgo.com/sheets/algebra-2/polynomials/dividing-polynomials-worksheet.php (I)
There is another approach ‘synthetic division’ but learners have to be careful when using it, especially when factorising.
use the factor theorem and the Summarise the work already done on polynomial division to show that p(x) = (divisor quotient) + remainder. Show that
remainder theorem, e.g. to find algebraic division can often be avoided in questions by substituting into p(x) the value of x that makes the divisor zero
factors and remainders, solve (e.g. substituting 3 if the divisor is x – 3 and calculating p(3) to find the remainder). Show that the factor theorem is a
polynomial equations or evaluate special case of the remainder theorem when the remainder is zero.
unknown coefficients; includes
factors of the form (ax + b) in which There is a good approach of this type which you could use with a whole class at:
the coefficient of x is not unity, and www.mathsisfun.com/algebra/polynomials-remainder-factor.html
including calculation of remainders
Show examples involving finding factors, solving polynomial equations and evaluating unknown coefficients to the whole
class, questioning learners individually throughout. Remind learners that they should show all their working as the use of
a calculator for finding solutions to polynomial equations will not be accepted in an exam.
A useful worksheet which covers basic use of the remainder theorem and evaluating unknown coefficients (log in for
free download) is at: www.tes.co.uk/teaching-resource/worksheet-on-the-remainder-theorem-6140286 (I)
More examples on the remainder theorem and on solving polynomial equations are at:
www.mash.dept.shef.ac.uk/Resources/A26remainder.pdf (I)
Past/specimen papers and mark schemes are available to download at www.cambridgeinternational.org/support (F)
8
Scheme of Work
understand the relationship Start by defining the terms ‘logarithm’ and ‘exponential’, linking to the concept of indices. To help learners understand a
between logarithms and indices, statement such as , describe it to them in words such as “What power of a is x? Answer: b”
and use the laws of logarithms
(excluding change of base) An introduction with animation showing the relationship between logarithms and exponentials is at:
www.purplemath.com/modules/logs.htm .
Learners should practise converting expressions from logarithmic to exponential form and from exponential form to
logarithmic. Most textbooks will have plenty of examples of this type.
To introduce the laws of logarithms, start with statements and . Use targeted questioning to
encourage learners to write the exponential forms of these statements and reach the conclusion that , rewriting
this in logarithmic form to obtain . Ask learners to obtain the other two laws in a similar way.
Learners will then need to practise applying these laws.
Eight files of notes, worksheets and revision (log in for free download) are at:
www.tes.co.uk/teaching-resource/a-level-maths-logarithms-worksheets-and-revision-6146791 (I)
understand the definition and You can introduce the exponential function in various ways. One approach is to use a graph plotter to show learners
properties of ex and In x, including
their relationship as inverse the graphs of various exponential functions, e.g. .
9
Scheme of Work
Extension activity: There are other, formal, approaches that you could use with more capable learners. For example
you could consider compound interest and the limit of the series as shown at: www.mathsisfun.com/numbers/e-
eulers-number.html
Encourage learners to obtain the logarithmic form of the statement and so introduce them to natural logarithms.
Building on the work done in Pure Mathematics 1.2 ‘Functions’, develop this into the inverse relationship between
and and demonstrate the inverses on a graph plotter. An interactive exercise covering this relationship is at:
http://hotmath.com/help/gt/genericalg2/section_8_5.html (I)
use logarithms to solve equations As a whole class exercise, work through some examples of increasing difficulty, using carefully directed questioning to
and inequalities in which the work through the solutions. Textbooks will include many examples of this type of question and the interactive exercise at
unknown appears in indices, the link above includes some too.
e.g. 2x < 5, 3 × 23x–1 < 5, 3x+1 = 42x–1
Demonstrate examples using inequalities, with learners finding critical values first and then deducing the set of solutions.
It is helpful to highlight to learners the sign of ln x for 0 < x ≤ 1, perhaps through an example where the inequality
reverses.
use logarithms to transform a If you relate this technique to practical situations, this will help learners when they need to use it in their scientific
given relationship to linear form, subjects. Common forms of equation are and . Learners will need to be able to write these equations in
and hence determine unknown logarithmic form and hence relate them to the equation of a straight line. Sometimes the variables will be letters other
constants by considering the than x and y so learners need to spot the form of the equation in order to distinguish the variables from the constants.
gradient and/or intercept, e.g.
y = kxn gives ln y = ln k + nln x
which is linear in ln x and ln y A useful summary for dealing with situations involving is at:
y = k (ax) gives ln y = ln k + x lna http://mathbench.umd.edu/modules/misc_scaling/page11.htm Either work through this with learners in class or they
which is linear in x and ln y. could study it independently. (I) Use a similar approach for equations of the type . Work through such an
example in class, making use of a graph plotter to demonstrate the straight line obtained.
10
Scheme of Work
Textbooks will provide learners with many useful practice questions. For variety, try to choose examples which involve
variables other than x and y. Often, learners are asked to work from a given graph in straight line form. Common errors
involve learners considering y values rather than In y values, so practising questions will help to avoid such errors. The
Paper 2 past exam papers have examples of this type.
To help reinforce this point, split learners into groups or pairs and ask each of them to prepare a question. A simple way
to do this is for learners to ‘work backwards’ from a logarithmic relationship e.g. . Each group chooses values for
and , works out the coordinates of two pairs of coordinates and draws an appropriate straight line graph. Learners
circulate their graphs around the other groups who then identify the logarithmic equations used to draw the graphs.
11
Scheme of Work
2.3 Trigonometry
understand the relationship of the Start by defining the secant, cosecant and cotangent functions. Learners should know the graphs of the sine, cosine and
secant, cosecant and cotangent tangent functions so, as a group or individual task, ask them to think what the graphs of secant, cosecant and cotangent
functions to cosine, sine and functions look like. For example, give them the graph of y = sin x (from -360° to 720°) and ask them to sketch y = cosec
tangent, and use properties and x on the same axes. They then check using a graph plotter.
graphs of all six trigonometric
functions for angles of any Use a similar graphical approach for y = sec x and y = cot x.
magnitude.
use trigonometrical identities for Start with the identity (which learners know already) and ask what they find when:
the simplification and exact
evaluation of expressions, e.g. (a) they divide each term in this identity by and (b) they divide each term in the original identity by .
simplifying
cos(x – 30°) – 3sin(x – 60°), A matching exercise and a worksheet for learners to complete as consolidation and practice are at:
and in the course of solving www.tes.com/teaching-resource/a-level-maths-reciprocal-trig-functions-worksheet-6146865 (I)
equations, e.g. solving
tan θ + cot θ = 4, Learners will need plenty of practice at simplifying trigonometric expressions and using the identities, particularly
2sec2θ – tan θ = 5, questions of the ‘Show that’ or ‘Prove that’ type. The best strategy is to start with one side of the expression (usually the
3cos θ + 2sin θ = 1, left hand side) and manipulate it using the identities covered so far. Textbooks will include some practice questions.
and select an identity or identities
appropriate to the context, An exercise on simplification is at:
showing familiarity in particular http://worksheets.tutorvista.com/proving-trigonometric-identities-worksheet.html (I)
with the use of
An exercise on proof is at:
- and https://people.math.osu.edu/maharry.1/150Au2011/TrigIdentities.pdf (I)
- the expansions of sin(A ± B), Learners will need to be able to use the identities to solve equations in degrees or radians, and textbooks will contain
cos(A ± B) and tan(A ± B) useful exercises on this. Learners will also need to practise manipulating expressions to obtain an equation (usually
- the formulae for sin 2A, cos
quadratic) in terms of one trigonometric ratio e.g. will simplify to which
2A and tan 2A
factorises.
- the expression of
in the forms For the compound angle (addition) formulae, work through an example of how one formula is derived, perhaps as a
12
Scheme of Work
Extension activity: Ask learners to work out the proofs of some of the other formulae.
Alternatively, start by giving learners the challenge of deriving the compound angle formulae graphically using this
interesting investigation: www.tes.co.uk/teaching-resource/the-compound-angle-formulae-lesson-worksheet-6056103
Proving the formulae may come more easily to learners once they are more familiar with them.
When learners are competent with the compound angle formulae, ask them to derive the double-angle formulae. They
will need to find all possible variants of the formula for as well as rearranging them to and
Textbooks include many useful practice exercises on solving equations using the compound and double-angle formulae.
Make sure that learners are proficient at using radians as well as degrees. (I)
Start with an example e.g. and show that it may be written in the form .
This can also be verified using a graph plotter: show learners the graph of and, with a discussion on
transformations, encourage learners to write this expression in a different way. They can check the result by plotting the
equivalent expression and seeing that it gives the same graph.
Next ask learners to find the maximum and minimum values of the expression and the values of at which they occur.
(Discourage the use of calculus for questions of this type.)
13
Scheme of Work
Textbooks include many examples of writing equivalent expressions, solving equations and finding maximum and
minimum values. Learners need to be proficient at using radians as well as degrees. (I)
2.4 Differentiation
use the derivatives of ex, In x, sin A good approach to teaching this section is to use a whole class approach and targeted questioning of learners. For the
x, cos x, tan x, together with function , learners already know that the gradient function is . Build on this by differentiating other functions
constant multiples, sums,
differences and composites such as , making use of the chain rule where appropriate.
Using the chain rule, you can generalise to expressions of the form
Textbooks will have exercises for learners to practice. (I)
To obtain the derivatives of sin x and , consider the gradient of a chord from the origin to a point
(h, sin h) on the curve y = sin x. Ask learners to calculate the gradient sin h / h (where h is 0.1 then 0.01 then 0.001) and
use this to deduce the gradient at x = 0. They then deduce the gradient at other key points on the graph, for example x =
0, π/2, π, 3π/2, 2π, use their values to plot the gradient function on a graph of y = sin x and name the graph obtained.
Show them that a similar approach will give them the gradient function for y = cos x.
You can find this method in many textbooks. It is also covered at:www.mathcentre.ac.uk/resources/uploaded/mc-ty-
sincos-2009-1.pdf
Extension activity: The resource above also covers differentiation from first principles which is suitable as an
extension for the more capable learner.
Encourage learners to obtain results for the derivatives of sin mx, cos mx, sin f(x) and cos f(x) during a class discussion,
14
Scheme of Work
Leave the differentiation of y = tan x until the quotient rule has been covered.
differentiate products and Derive the product and quotient rules as a whole class exercise so that learners (especially the more able) can
quotients, e.g. understand the formulae more thoroughly. There is a proof using function notation at: http://nrich.maths.org/10086.
Alternatively, write the product as uv (where u and v are functions of x) then consider increasing the area of a rectangle
uv to (u + δu)(v + δv). Expanding the brackets, writing every term over δx and considering the limit as δx -> 0 leads to
, , the product rule.
Three files of examples and worksheets on differentiation of products are at: www.tes.co.uk/teaching-resource/product-
and-quotient-rules-6146838 (I)
Appropriate textbooks will have further examples. Try to introduce a variety of different types of functions (such as those
in the previous section) and encourage learners to simplify their answers.
Three files which include examples/worksheets on differentiation of quotients (log in for free download) are at:
www.tes.co.uk/teaching-resource/product-and-quotient-rules-6146838 (I)
Appropriate textbooks will have further examples. Try to introduce a variety of different types of functions (such as those
in the previous section) and encourage learners to simplify their answers.
find and use the first derivative of Introduce the idea of parametric equations to learners by asking them to imagine two cars moving towards each other
a function which is defined along different straight lines on the x-y plane. You know their lines will intersect but how do you know if the cars will
parametrically or implicitly; collide or miss each other? You need to consider a third parameter (e.g. time), and express both x and y in terms of this
e.g. x = t – e2t, y = t + e2t , parameter, in order to say whether or not there will be a collision.
15
Scheme of Work
e.g. x2 + y2 = xy + 7,
including use in problems Then show learners some simple examples, e.g. and eliminate t to obtain the Cartesian form of the
involving tangents and normals curve. A graph plotter may be useful.
Show that the gradient function may be obtained using the derivatives and together with the chain rule. Extend
the work to include parametric equations involving trigonometric functions e.g. to help learners to
consolidate their knowledge of trigonometric identities and differentiation of trigonometric functions.
A clear and thorough treatment of the topic with worked examples (see 17.1 Cartesian and parametric equations of a
curve and 17.4 Parametric differentiation) is at: www.cimt.org.uk/projects/mepres/alevel/pure_ch17.pdf
A good overview of the topic (second derivatives are not required) is at:
www.mathcentre.ac.uk/resources/uploaded/mc-ty-parametric-2009-1.pdf
Extension activity: Learners investigate interesting curves expressed in parametric form using a graph plotter. There
are many websites with good examples, for instance this one gives a selection of equations:
https://cims.nyu.edu/~kiryl/Calculus/Section_9.1--Parametric_Curves/Parametric_Curves.pdf
For implicit differentiation, start with the definition of implicit and explicit functions.
Show learners terms of various types: they now know how to differentiate powers of x or y with respect to x. Introduce
the idea of a product term by asking them to differentiate equations such as and implicitly using the
product rule and by rearranging them and differentiating y with respect to x.
Now ask learners to work through an equation from left to right and differentiate it implicitly without rearranging it first.
(Give them equations which cannot be rearranged to prevent them doing this.)
16
Scheme of Work
2.5 Integration
extend the idea of ‘reverse Start with a quick review of integration from Pure Mathematics 1.8 ‘Integration’, as a question and answer session with
differentiation’ to include the learners writing on mini whiteboards and holding up their responses. This will enable you to assess all learners’
understanding before moving on to examples in this section.
integration of , , Divide learners into groups and give them sets of expressions to integrate. Ask them to consider what would need to be
, and differentiated to obtain the given expression, then to work out some general principles.
; knowledge of the A good approach for integration involving logarithmic functions is at:
general method of integration by www.mathcentre.ac.uk/resources/uploaded/mc-ty-inttologs-2009-1.pdf (I)
substitution is not required Some of the examples may be beyond the range of this syllabus.
Textbooks will include exercises on integrating all of these types of function, including finding areas. (I)
use trigonometrical relationships in Ask learners to recall the three forms of the trigonometric identity for and then to use them to rewrite
carrying out integration, e.g. use of
double-angle formulae to integrate and in terms of .
sin2x or cos2(2x)
17
Scheme of Work
equations, for example: find the equation of the curve, with gradient function
understand and use the trapezium Start by sketching on the board part of a curve with an unknown equation. Ask learners to consider the area under this
rule to estimate the value of a curve, enclosed by the x-axis, split into a number of strips of equal width. How could they work out the area?
definite integral; including use of
sketch graphs in simple cases to A PowerPoint presentation that uses this approach and gives some examples (log in for free download) is at:
determine whether the trapezium www.tes.co.uk/teaching-resource/trapezium-rule-powerpoint-c2-maths-lesson-3009786
rule gives an over-estimate or an
under-estimate Encourage learners to determine, from a sketch of the curve, whether or not the area they calculate will be an
overestimate or underestimate. It is important for them to be able to explain their reasoning clearly.
Three files which enable learners to work through examples on the trapezium rule and understand its limitations, and
which include clear explanations of overestimates and underestimates are at:
www.tes.co.uk/teaching-resource/trapezium-rule-6146799 (I)
18
Scheme of Work
locate approximately a root of an Introduce this topic by using a graph plotter to demonstrate both sign changes and graphical considerations e.g.
equation, by means of graphical :
considerations and/or searching Change of sign
for a sign change, e.g. finding a 4 y
−6 −4 −2 2 4 6
−2
−4
−6
−8
You can see clearly that there are solutions to the equation in the intervals and
Learners consider the sign of y either side of the points of intersection of the curve with the x-axis i.e. using the
boundaries above.
Demonstrate also that the same result may be obtained by plotting against :
y
20
10
−6 −4 −2 2 4 6
19
Scheme of Work
Learners will need to practise examples of both types. Encourage them to set out their work clearly and accurately. For
example, to show that the equation has a solution in the interval , learners should state ‘Let
’ then write the equation as . By calculating and writing down the values of and
, they can demonstrate that there is a sign change and state their conclusion e.g. ‘ There is a change of sign, so a
solution lies in the interval ’.
understand the idea of, and use The second part of this chapter deals with convergence to a root of an equation:
the notation for, a sequence of www.cimt.org.uk/projects/mepres/alevel/pure_ch19.pdf
approximations which converges
to a root of an equation Extension activity: The first part of this chapter demonstrates a formal approach to the idea of a sequence of
approximations converging to a root of an equation:
www-solar.mcs.st-andrews.ac.uk/~clare/Lectures/num-analysis/Numan_chap2.pdf
You could use it with able learners or perhaps with a whole class. It explains how an iterative formula generates the
sequence; this is the next learning objective.
understand how a given simple A video tutorial which learners could watch independently or as a whole class is at:
iterative formula of the form www.tes.com/teaching-resource/iteration-6201516
xn + 1 = F(xn) relates to the equation
being solved, and use a given Iterative formulae are covered in this chapter, which includes examples and activities for learners to try:
iteration, or an iteration based on www.cimt.org.uk/projects/mepres/alevel/pure_ch19.pdf
a given rearrangement of an
equation, to determine a root to a It is a good idea for learners to make full use of their calculator for the iteration process. Using the ANS (answer) key
prescribed degree of accuracy; will save them time in finding a root of an equation. For example:
knowledge of the condition for
convergence is not included, but
an understanding that an iteration Using the iterative formula with , show successive iterations to five decimal places and a final
may fail to converge is expected answer to three decimal places.
Start by entering the value of into the calculator: press ‘3’ then ‘=‘ (or ‘enter’, depending on the calculator), so 3
appears as an answer.
Key in the right hand side of the iterative formula, replacing with ANS (or the key that displays a previous
20
Scheme of Work
answer) i.e. . The calculator will display 2.666666667. Write this down to five decimal places.
Keep pressing the ‘=’ key and successive iterations will appear. Write down as many as the question requires, all
correct to 5 decimal places:
2.62500
2.61905
2.61818
2.61806
2.61804
2.61803
You have now done enough iterations to show that an answer of 2.618 is correct to three decimal places.
Learners will need practice at entering the correct formula into their calculator, using brackets where necessary.
21
Cambridge Assessment International Education
The Triangle Building, Shaftesbury Road, Cambridge, CB2 8EA, United Kingdom
t: +44 1223 553554
e: [email protected] www.cambridgeinternational.org