PEGSON - 'M' Series JAW Crusher (Curvas de Produccion) (+++)
PEGSON - 'M' Series JAW Crusher (Curvas de Produccion) (+++)
‘M’ Series
Jaw Crusher
90
SETTING
80 25mm (1”)
38mm (11/2”)
70 51mm (2”)
PERCENTAGE PASSING
64mm (21/2”)
60
76mm (3”)
50 102mm (4”)
127mm (5”)
40
152mm (6”)
30 178mm (7”)
203mm (8”)
20
10
0
0 25 51 76 102 127 152 178 203 229 254 279 305 330 356
SIZE OF SQUARE SCREEN OPENING IN MILLIMETERS
Closed
CRUSHER CAPACITY
CRUSHER MODEL CAPACITIES: Mt/h (US t/h) The capacities are based on crushing
Side
Setting 600x400 700x500 800x550 900x600 1100x650 1100x800 clean dry limestone weighing loose
mm (ins) 24”x15” 28”x20” 32”x22” 36”x24” 44”x26” 44”x32” about 1.6 t/m3 (100lb/ft3) and having a
specific gravity of 2.6. The feed material
15 - 25
25 (1”) should be of a size that will readily enter
(17 - 28)
the crushing chamber without bridging.
25 - 35 35 - 45 40 - 50 55 - 65 Wet sticky feeds will tend to reduce
38 (11/2”)
(28 - 39) (39 - 50) (44 - 55) (61 - 72) capacity.
30 - 50 40 - 55 50 - 65 70 - 85 90 - 140
51 (2”)
(33 - 55) (44 - 61) (55 - 72) (77 - 94) (99 - 154) TO MAXIMISE CAPACITY
40 - 60 50 - 70 60 - 80 80 - 100 100 - 160 115 - 170 A feeder should be used ahead of the
64 (21/2”) crusher to give a continuous regulated
(44 - 66) (55 - 77) (66 - 88) (88 - 110) (121 - 176) (127 - 187)
50 - 70 60 - 80 65 - 85 85 - 120 130 - 190 140 - 210 feed: all feed should be of a size that will
76 (3”) readily enter the crushing chamber and
(55 - 77) (66 - 88) (72 - 94) (94 - 132) (143 - 209) (154 - 231)
undersized material should be removed
75 - 95 80 - 100 95 - 140 140 - 220 160 - 240
89 (31/2”) from the feed by the means of a grizzly
(83 - 105) (88 - 110) (105 - 154) (154 - 242) (176 - 264)
or scalping screen to eliminate packing
102 (4”)
90 - 110 110 - 155 150 - 250 170 - 270 and excessive wear on the jaws.
(99 - 121) (121 - 171) (165 - 275) (187 - 297)
100 - 110 130 - 200 180 - 290 200 - 290 POWER VARIATION
127 (5”)
(110 - 160) (143 - 220) (198 - 319) (220 - 319) The Power required will vary with
210 - 330 230 - 350 product size, capacity and rock
152 (6”)
(231 - 363) (253 - 385) characteristics.
230 - 380 260 - 400
178 (7”) CRUSHER GRADING
(253 - 418) (286 - 440)
The grading curves provided are a guide
275 - 430 295 - 460
203 (8”) only and will vary with rock
(303 - 473) (324 - 506) characteristics.
C H H
J K
D CL
E B
A F
DIMENSIONS (mm)
CRUSHER
MODEL A B C D E F G H J K
600 X 400 1380 965 920 200 940 760 965 753 626 267
700 X 500 1584 1172 1119 360 1145 800 1007 710 630 160
800 X 550 1720 1340 1270 360 1298 960 1220 920 776 240
900 X 600 1740 1362 1285 360 1320 1020 1220 920 776 240
1100 X 650 2060 1456 1490 500 1440 1300 1370 1170 984 340
1100 X 800 2450 1897 1900 670 1867 1360 1524 1190 1016 306
DIMENSIONS (inches)
CRUSHER
MODEL A B C D E F G H J K
24 X 15 54 38 36 8 37 30 38 30 25 11
28 X 20 62 46 44 14 45 31 40 28 25 6
32 X 22 68 53 50 14 51 38 48 36 31 9
36 X 24 69 54 50 14 52 40 48 36 31 9
44 X 26 81 57 59 20 57 51 54 46 39 13
44 X 32 96 75 75 26 74 54 60 47 40 12
‘M’ Series Jaw Crushers
Weights & Drive Details
METRIC UNITS
Crusher Net Weight (kg) 3,700 5,500 9,500 10,400 16,300 24,300
IMPERIAL UNITS
Crusher Net Weight (lbs) 8,157 12,125 20,944 22,928 35,935 53,572
Power Required (HP) 40 50 90 - 100 100 - 125 100 - 150 120 -175
NOTES:
Machine sizes 700x500 (28”x20”) and 800x550 (32”x22”) are fitted with a counterweight in lieu of the non drive side flywheel.
An additional flywheel is available for the 800x550 (32”x22”) in lieu of the counterweight as an option.
The 600x400 (24”x15”) and the 900x600 (36”x24”) and upwards are all fitted with two flywheels as standard.
Your Local Authorised BL-Pegson Dealer:
BL-Pegson Ltd
Mammoth Street, Coalville,
Leicestershire, LE67 3GN. England.
Tel: +44 (0) 1530 518600
Fax: +44 (0) 1530 518618
email [email protected]
www.bl-pegson.com
US Office:
11001 Electron Drive, Louisville,
Kentucky, 40299 USA.
Tel: (502) 736 5200.
Fax: (502) 736 5202
All reasonable steps have been taken to ensure the accuracy of this publication, however US office is not ISO 9002 registered.
due to a policy of continual product development we reserve the right to change
specification without notice. "BL-Pegson" is the trade mark of BL-Pegson Limited,
Coalville, Leicestershire. England.