Scribd Logo
Upload

Welcome to Scribd!

  • Ds - TECHDRAIN GTG 30.6 - en

    Uploaded by

    Thameem Sharaaf
    15 views1 page
    TECHDRAIN GTG 30.6 is a drainage geocomposite made of high-density polyethylene geonet laminated between two polypropylene geotextiles. The geonet has three strands that create channels allowing high flow capacity even under pressure or low gradients. The geocomposite is used for drainage in landfill capping, reservoirs, embankments, foundations, and other underground structures. It has high puncture resistance, permeability, and tensile strength according to standardized tests.

    Original Description:

    Original Title

    ds_TECHDRAIN GTG 30.6_en (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    TECHDRAIN GTG 30.6 is a drainage geocomposite made of high-density polyethylene geonet laminated between two polypropylene geotextiles. The geonet has three strands that create channels allowing high flow capacity even under pressure or low gradients. The geocomposite is used for drainage in landfill capping, reservoirs, embankments, foundations, and other underground structures. It has high puncture resistance, permeability, and tensile strength according to standardized tests.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    15 views1 page

    Ds - TECHDRAIN GTG 30.6 - en

    Uploaded by

    Thameem Sharaaf
    TECHDRAIN GTG 30.6 is a drainage geocomposite made of high-density polyethylene geonet laminated between two polypropylene geotextiles. The geonet has three strands that create channels allowing high flow capacity even under pressure or low gradients. The geocomposite is used for drainage in landfill capping, reservoirs, embankments, foundations, and other underground structures. It has high puncture resistance, permeability, and tensile strength according to standardized tests.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    TECHDRAIN GTG 30.

    6
    Drainage Geocomposite
    TECHDRAIN GTG 30.6 is a triplanar geonet made of high-density polyethylene (HDPE) with two
    polypropylene (PP) geotextiles heat laminated on both sides. The geonet is made with 3 strands,
    whose geometry creates channels with a high flow capacity, also under high pressures and at very
    low gradients.

    FUNCTIONS:
    DRAINAGE, FILTRATION, SEPARATION and PROTECTION.

    MAIN USES:
    Landfill capping, new landfills, water reservoirs, horizontal drainage in embankments and platforms
    of roads, railways, trams and other trafficked areas, retaining structures, bridges, foundations,
    basements, canals, cut and cover tunnels, tunnels and other underground structures, gardens and
    sport fields.

    Properties Values Units Qualifiers Standards


    Geonet ⁽¹⁾
    Polymer High-density polyethylene ( HDPE )
    Carbon black 2 % Min ASTM D4218
    Density 0.94 g / cm³ Min ASTM D1505
    Thickness 300 (7.6) mil (mm) MAV ASTM D5199
    Transmissivity, MD ⁽²⁾ 7 x 10⁻³ m² / s MARV ASTM D4716
    Tensile strength, MD 85 (15.0) lb / in (kN / m) Min ASTM D7179
    Creep Reduction Factor ⁽³⁾ 1.15 - per formulation GRI-GC8
    Geotextile ⁽¹⁾
    Polymer Polypropylene ( PP )
    Mass per unit area 6 (200) oz / yd² (g / m²) MARV ASTM D5261
    CBR Puncture 450 (2.000) lb (N) MARV ASTM D6241
    AOS 70 (212) US Sieve (µm) MaxARV ASTM D4751
    Grab strength 169 (750) lb (N) MARV ASTM D4632
    Grab elongation 50 % MARV ASTM D4632
    Tear strength 65 (290) lb (N) MARV ASTM D4533
    Permeability 124 (5.050) gal / ft²·min (l / m²·min) MARV ASTM D4491
    Permittivity 1.63 s⁻¹ MARV ASTM D4491
    UV resistance 70 % ret. 500h MARV ASTM D4355
    Drainage geocomposite
    Ply adhesion, MD 1 (178) lb / in (g / cm) Min ASTM D7005
    Transmissivity, MD (DS) ⁽⁴⁾ 5 x 10⁻³ m² / s ⁽²⁾ MARV ASTM D4716
    Remarks
    - Standard roll formats are 11.8 feet (3.6 meters) wide.
    - Has a geotextile overlap at one side, which eases the installation and prevents soil intrusion.
    - Has to be covered within 14 days after installation.

    ⁽¹⁾ Geonet and geotextile listed properties are prior to lamination


    ⁽²⁾ Transmissivity measured under an hydraulic gradient of 0.1, normal load of 10,000 psf (480 kPa), water at 70 °F (21 °C) and between hard
    plates (H/H) for 15 minutes
    ⁽³⁾ 10,000 hour Compressive SIM Creep Test under 15,000 psf (720 kPa)
    ⁽⁴⁾ Transmissivity measured under an hydraulic gradient of 0.02, normal load of 15,000 psf (720 kPa), water at 70 °F (21 °C) and boundary
    condition plate/soil/geocomposite/geomembrane/plate for 1 hour

    MD : Machine Direction (longitudinal)


    MARV : Minimum Average Roll Value
    MAV : Minimum Average Value
    Min : Minimum Value
    January 2020

    Max : Maximum Value


    MaxARV : Maximum Average Roll Value
    CE Certificate of
    conformity

    0099/CPR/A42/0124
    0099/CPR/A42/0127

    These specifications are based on our present state of knowledge.


    0120TX INTERMAS declines any responsibility due to their use in projects or civil works and hands them for informative purposes only.

    You might also like