Cochin ORALS Question Bank
Cochin ORALS Question Bank
MARPOL Annex 6 amendment’s, what are the gases under this annex. What are ozone depleting
substances? What are the documents for Sox and Nox. How you say that your ship is compliant
with Annex 6 after ship building. What are things you will do after the IOPP certificate? Who is
giving you the IOPP certificate and how you get the certificate? How you prove that you are
compliant with IOPP certificate. What are the volatile organic compounds? Which ships having this
VOC. How do you comply with this? Messed up here.
Inert gas system safeties?
Cross section of last ship.
Conditions for bilge keel.
Tumble home
Camber.
Sheer strake.
Ows discharge criteria
Annex 6 compliance
Bdn contents.
CO2 room requirements
Bulbous bow constitution features
Advantages of C02
Why tankers have lesser freeboard
Preparation for dry dock
Contents of docking plan
Preparation for boiler survey
draw cross section of tanker
bilge strake
free board
advantages of having less free board
sheer strake
tumble home
camber (does it apply toall ships)
factoe affecting GZ
stability criteria
angle of loll
fixed fire fighting foam
adv and disadv of foam
adv of co2 over foam
co2 regulations
emergency regulator regulations
types of fire detectors
where you will find heat detectors in E/R
annex 6 , latest regulation
who issue certificate rega this annexe
Bdn contents.
renewal survey how you prepare documents
VECS
gases in this annex
maintenance of foam system (freq of testing foam)
Draw and explain IG system
What is deck seal
Safeties in IG system
What is mast riser, location and how to fight fire
What is PV valve and PV breaker what is the pressure setting
Maintenance on CO2 system, 2 yearly, 5 yearly , 10 yearly ( pressure testing values)
Intact stability and Damage stability
Ballast water management code, D1 & D2
Preparations for ISM audit as 2E
Inclining experiment
What are the contents of SSP
ORB back date entry( bunkering)
different types of underwater painting
ballast water management system explain in detail all standards and values
load line surevy prep
different types of body plans
SIR explain, ISPS code req
Nox emission and latest developments
GZ curve explain
Different types of stability and explain application
Pumproom ventilation
Proportionator
Inclining experiment
Vacuum sewage
Simpsons rule
Ism internal audit
Foam proportionator diagram and working
Management review
ISPS certificate procedure
COA
Pump room ventilation diagram
Reserve buoyancy
Emergency generator regulation
Battery maintenance
Fixed CO2 maintenance
ISPS ,certificate,how certificate issued
Sprinkler system draw
OWS draw
Centrifugal brake draw
Safety equipment survey
What is wake .
Wake fraction
Speed of advance.
As 2ae how will you bring up your 4th engineer performance ?
EEOI
Metacentre
How BOIL OFF is taken care in LNG
Why CO2 is used as fixed fire fighting medium
which I explained properly. What is the chemical inside it? How is it useful in correspond to CO2? How is it being refilled?
NO DATE SURVEYOR
1 2020 DEC SUBBU
2 2020 DEC SUBBU
3 2020 DEC SUBBU
4 2020 DEC SUBBU
5 2020 DEC SUBBU
6 2020 DEC SUBBU
7 2020 DEC SUBBU
8 2020 DEC SUBBU
9 2020 DEC SURNDRNTH
10 2020 DEC SURNDRNTH
11 2020 DEC SURNDRNTH
12 2020 DEC SURNDRNTH
13 2020 DEC SURNDRNTH
14 2020 DEC SURNDRNTH
15 2020 DEC SURNDRNTH
16 2020 DEC SURNDRNTH
17 2020 DEC SURNDRNTH
18 2020 DEC SURNDRNTH
19 2020 DEC SURNDRNTH
20 2020 DEC SURNDRNTH
21 2020 DEC SURNDRNTH
22 2020 DEC SURNDRNTH
23 2020 DEC SURNDRNTH
24 2020 DEC SURNDRNTH
25 2020 DEC SURNDRNTH
26 2020 DEC SURNDRNTH
27 2020 DEC SURNDRNTH
28 2020 DEC SURNDRNTH
29 2020 DEC SURNDRNTH
30 2020 DEC SURNDRNTH
31 2020 DEC SURNDRNTH
32 2020 DEC SURNDRNTH
33 2020 DEC PRAVEEN
34 2020 DEC PRAVEEN
35 2020 DEC PRAVEEN
36 2020 DEC PRAVEEN
37 2020 DEC PRAVEEN
38 2020 DEC PRAVEEN
39 2020 DEC SUBBU
40 2020 DEC SUBBU
41 2020 DEC SUBBU
42 2020 DEC SUBBU
43 2020 DEC SUBBU
44 2020 DEC SUBBU
45 2020 DEC SUBBU
46 2020 DEC SUBBU
47 2020 DEC SUBBU
48 2020 DEC SUBBU
49 2020 DEC SUBBU
50 2020 DEC TK
51 2020 DEC TK
52 2020 DEC TK
53 2020 DEC TK
54 2020 DEC TK
55 2020 DEC TK
56 2020 DEC VV JOHNY
57 2020 DEC VV JOHNY
58 2020 DEC VV JOHNY
59 2020 DEC VV JOHNY
Capacity control of refer system. Continuous running system. Compresser does not stop.
When load decreases suction pressure decreases. He asks why suction pressure decreases. He
wants to hear different sets of banks of cylinders are offloaded. Each one has pressure
transmitters. They sence the low pressure and give signal to pressure switch which activates
solenoid valve which activates 3 way valve which recirculates the branch of oil which was
going to load the cylinder banks and therefore offloading the banks and controlling capacity.
Control air dryer desiccant type and ref type.
Desiccant type is a single system consisting of 2 units with silica gel. Put into use alternatively
with use of timer. Heating coil used to regenerate the unit not in use.
Crankshaft deflection and interpretation. Not accepting that it is for checking condition of
main bearings
Superheater function, location. Why steam needs to be superheated ?
Location behind screen tubes in the furnace. Reason to remove moisture and improve
efficiency because copy is reaction turbine he is not accpting
S/G pump types. Explain working of any one type
Calorific value
Ccai
Scavenge fire
Tev
Superheated steam
Starting air line explosion
Draw fully balanced rudder
Safties in airborne
Bottom end bearing removal
Main bearing removal
ME ENGINE MENUVERING DIA
TYPES OF REVERSING METHODS
FORCES ACTING ON TRANVERESE GIRDER
PID CONTROLLER
TURN DOWN RATIO
DIA OF PRESSURE JET BURNER
UPTAKE FIRE ACTIONS
CASCADE CONTROL
BOILER SAFETY VALVE SETTING
HIGH LIFT SAFETY VALVE DIA
CROSS HEAD BEARING INSPECTION WITH OUT TAKING OUT PISTON.
THRUST BEARING CLEARANCE CHECK.
AUX ENGINE THRUST BEARING REMOVAL.
ME PISTION CROSS SECTIONAL DIA
EXH V/V O HOUL PROCEDURE.
CHECKS TO BE CARRIED OUT ON SHIPS HULL DURING DRY DOCK.
TAIL SHAFT ALIGNMENT METHODS.
Types of lubrication and deep cross qns and where these lubrication used
Properities reqd for each type of lubrications specifically
Chain drive diagram for last vessel
Hot gas defrosting diagram
Rotary vane steering diagram and xplanation
Semi balanced rudder, pintle ...
Big end bearing removal and inspection procedure
Use of anti polishing ring and position where the cleaned soot or particles will go?
Fresh water distillation system full glow chart and xplanation
Stern tube sealing system diag
types of engine
y super long stroke engine used.
how to calculate power.. And tyoes of other methods.
indicator diagram explain
crankcase explosion
cylinder lubricator properties
wt r the maintenance will you carried out regarding main bearing and shafting system.
Volumetric efficiency
TYPES OF engine sailed with
Difference between Sulzer and Man Fuel valves and fuel pumps
VIT working
Difference between EGB and Economiser
What you will do if you got low level alarm in EGB
OMD alarms what you will do
Bilge alaram what you will do
Overspeed trips in Genarator
Nox technical file where to find and what are components mentioned in NOx file
A/E fuel pump leaking, how you will come to know
Bridge manoeuvring system
Crash astern from Bridge describe sequence
Starting air line explosion, safeties
Leak testing of Starting air valve
Boiler internal inspection
Scavenge inspection
Stuffing box
Safety against liquid ingress in refrigeration comp. suction
Stuffing box worn out no spares what action, name of the spring
50% redundancy of steering gear
creep stress
reversing of engine
fuel pump timing
tail shaft alignment
engine not starting on air
engine not starting on fuel
interlocks complete
boile safety valve setting
alakalinity increase what happen/values of alakalinities
caustic embrittlement
crank pin removal survey
stern tube wear limit and checking
turbocharger advancement
hybrid turbocharger
ehaust valve overhaul
drydock inspection as 2eo
propeller mounting and dismounting
Vrc working
Governer actuator...what are inputs of governer. Type of governer. Droop, difference
between ae and me governer.how inputs are taken.
Mechanical seal
Ae performance..how v know that the pressure v get is right or wrong.
How me is aligned?
Chocks why used what happen if it is not there
Scavenge inspection.
draw card, fuel early/late injection
propeller shaft mounting
scavenge fire malacca strait
Type of Engine
What is MCR? What is the load indicator in ECR indicating?
Type of governor on Main engine. Explain electronic governor
Purifier type. Explain Hidens in Selfjector
Seawater pump type and seal type. Positive displacement pumps in ER,
Relief valve setting pressure.. Can we set the Relief valve? How to know the set pressure of
Relief valve?
Capacity of Boiler
AE fuel valve testing
Compresaor taking time to press up airbottle. Possible causes
Checks prior to sea chest filter cleaning
How to order globe valve?
types of main engine worked, problem faced in each
how to remove broken tie rod on MC and MCC engine
boiler name plate details, capacity of boiler
what is saturated and superheated steam
draw PH curve and explain subcooling and superheat in refrigeration
what all precautions are provided in compressor if liquid enters
governer knobs, adjustments made using them
how chrome liner is fitted with diagram
explain sterntube air seal arrangement
spark erosion, shaft earthing
protection on air bottles( fusible plug and relief v/v in detail)
boiler safety valve setting procedure
regulations for high pressure fuel pipes in engine room
Closed and open loop with example
Bearing no 6207
Stern tube wear down
Hydraulic jack diagram
Telemotor hydraulic diagram
A.E TC nozzle ring ohaul procedure
Cast iron welding ,why difficult
Propeller material
Bursting disc damaged while manoeuvre, what action u take
At half speed found l.o temp rising for all units,reason and action.
Fuel oil analysis report in detail
Air cooler leak detection in tube
Types of vibration
Detuner,damper difference
Engine specificaion and explain each term
advantages of super long stroke
DFDE explain and cross questions
liner wear, cross questions
LO properties and its uses
spark erosion, shaft earthing
boiler safeties, why 2 safety valves
how will you take performace of engine
calculate power of engine
boier water tests
why ME enigne is better compared to MC engine, lots of cross
Manoeuvring diagram ME engine.
HPS pump pressure, how it supplies to ELFI.
Reversing in ME engine.
Interlocks in starting system.
Draw cards.
Pressure jet type burner. Turn down ratio.
PID controller
Safematic steering gear
Forces on transverse girder.
Heleshaw pump drawing.
Exhaust valve overhaul. Clearances
crank pin bearing ovhl
Piston ovhl.
Propeller drop. Wear limit.
Scavenge fire in Malaca.
Hull inspection in drydock
Thrust bearing clearance
AE governor droop
ME governer inputs
boier types classification based oncapacity
FO properties, density uses (bunker calculation, purifier)
westfalia purifier working without pairing disc, like alcap
refer veg room back pr v/v working
Reasons for vacuum in COPT vacuum condensor
Use of chocks and how is it done
All characteristics of Centrifugal COP pump
Capacity control in Refrigeration plant
working of control air drier
Fuel cut off during maneouvring- cannot stop engine
Fuel cut off at sea
Rectify leaky smoke tube boiler(both temporary and permanent)
lubrication of thrust block
Hydrodynamic lubrication, lube oil properties. Boundary lubrication
Draw slide type fuel injector
Muff coupling, advantages and uses
Aft seal drawing
Sulzer fuel pump timing
Bottom end bearing removal
Priming unit diagram
ME uptake fire
T/C surging reasons
Piston ring breaking reasons
Ae sump- fuel contamination reasons.
ae thrust bearing clearance measuring procedure.
ae t/c overhaul, clearances.bearing types.removal of nozzle ring.
Me not starting on air, reasons.
me thrust bearing clearance, procedure.
stern tube clearance.
porpeller drop measuring procedure.( Dry dock).
cast iron welding procedures.electrod for cast iron welding.
brass and bronze , alloy elements, properties, difference.
bearing no 6207ZZ. What you understand from this.?
SFOC ( all engines) draw graph
priming in boier explain
governor how to adjust speed, what happens internally
latest developments in man and sulzer
cross head bearing lubrication (latest alterations made)
refrigeration efficiency
air in refrigeration system, how to remove what are the effets of air
FO analysis reports, explain different values
LO analysis report, explain each and how you tackls
cam less engine explain advantages
high pressure pump in your ship (explain safeties in cam less engine)
Caustic embrittlement How NaOH is formed
You are new 2E,Exh valve to be replaced, but no time to dismantle the spare and check so
what all checks - dye test on mating surface
AE rocker arm lubrication
AE fuel pump timing check, timing adjustment
AE thrust bearing clearance
Sterntube LO system (not seal) LO flow (LO from tank goes to bottom or top of ST)
Why ST pump is used in some system
ST bearing wear How to check
Propeller drop measurement procedure
Sub cooling, Super heating
Co efficient of performance
Stuffing box overhaul
Piston overhaul and Checks
Liner Checks, what Type of surface finish for Liner
ME Starting in air not in fuel
Camless Engine advantages
what is BMEP- Brake mean effective pressure
Peak pressure of your Engine
How many knobs on Woodward governor Explain
Gear pump working dia (cs)
Gear pump not building up pressure- reasons
Compensation in goverener
Diffrence between brass and bronze
Sfoc.(.in gen emg generator and main engine which one having less sfoc)
Back pressure vlave including pressure values in evaprator
Bearing nomenclature
Chain tightning
Stuffig box overhaul
Thrustbearing clearance
Scavenge space inspection
Mooring winch motor working...not the hydralic diagram
Bilge pump diagram, pressure is not building in pump what all problems u suspect.
Governer knobs , each knobes function
Camless engine
Non destructive tests
Properties of refrigerant
Manouvering diagram for stop signal,
Piston cooling oil temperature going high suddenly when engine is half ahead, reasons
A/e Reverse power trip value, wat damages will occur if reverse power trip doesn't work
Foaming in boiler, problems n reason
Thermostatic expansion valve working
Equalizing line in TEV
Bottom end bearing overhaul
Ae air start system draw and explain
Pilot Air distributor rta draw
Uptake fire
Sulzer air starting distributor....
MAN B&W MCC chain drive, draw and explain.....
Sulzer rta fuel pump timing check....
Scavenge fire actions, indications, reasons, inspection after scavenge fire.....
Daihatsu aux engine main bearing removal procedure....
Purpose of side bolt...
Thermal efficiency and various cycles
Tie rod functions
What checks done replacement procedure
Uptake fire
Priming arrangment for centrifugal pump
Crosshead bearing removal procedure
How superheated steam is produced ?
Why vacuum maintained in condenser?
Jacket cooling water controller
Why ME-C engines used in LNG and lot of cross questions
Dfde features
As 2AE How you reduce EEOI ?
Draw a reflex type gauge glass
NO DATE SURVEYOR
1 2020 DEC SUBBU
2 2020 DEC SUBBU
3 2020 DEC SUBBU
4 2020 DEC SUBBU
5 2020 DEC SUBBU
6 2020 DEC VV JOHNY
7 2020 DEC VV JOHNY
8 2020 DEC VV JOHNY
9 2020 DEC VV JOHNY
10 2020 DEC VV JOHNY
11 2020 DEC VV JOHNY
12 2020 DEC SREEKUMR
13 2020 DEC SREEKUMR
14 2020 DEC SREEKUMR
15 2020 DEC SREEKUMR
16 2020 DEC SREEKUMR
17 2020 DEC SURNDRNTH
18 2020 DEC SURNDRNTH
19 2020 DEC SURNDRNTH
20 2020 DEC SURNDRNTH
21 2020 DEC SURNDRNTH
22 2020 DEC VV JOHNY
23 2020 DEC VV JOHNY
24 2020 DEC VV JOHNY
25 2020 DEC VV JOHNY
26 2020 DEC VV JOHNY
27 2020 DEC
28 2020 DEC
29 2020 DEC
30 2020 DEC
31 2020 DEC
32 2020 DEC
33 2020 DEC
34 2020 DEC
35 2020 NOV SUBBU
36 2020 NOV SUBBU
37 2020 NOV SUBBU
38 2020 NOV SUBBU
39 2020 NOV SUBBU
40 2020 NOV SUBBU
41 2020 NOV SUBBU
42 2020 NOV SUBBU
43 2020 NOV SUBBU
44 2020 NOV SUBBU
45 2020 NOV RAJEEV NAIR
46 2020 NOV RAJEEV NAIR
47 2020 NOV RAJEEV NAIR
48 2020 NOV RAJEEV NAIR
49 2020 NOV RAJEEV NAIR
50 2020 NOV RAJEEV NAIR
51 2020 NOV VV JOHNY
52 2020 NOV VV JOHNY
53 2020 NOV VV JOHNY
54 2020 NOV VV JOHNY
55 2020 NOV VV JOHNY
56 2020 NOV VV JOHNY
57 2020 NOV RAJEEV NAIR
58 2020 NOV RAJEEV NAIR
59 2020 NOV RAJEEV NAIR
60 2020 NOV RAJEEV NAIR
61 2020 NOV RAJEEV NAIR
62 2020 NOV RAJEEV NAIR
63 2020 NOV RAJEEV NAIR
64 2020 NOV RAJEEV NAIR
65 2020 NOV RAJEEV NAIR
66 2020 NOV RAJEEV NAIR
67 2020 NOV RAJEEV NAIR
68 2020 NOV RAJEEV NAIR
69 2020 NOV VV JOHNY
70 2020 NOV VV JOHNY
71 2020 NOV VV JOHNY
72 2020 NOV VV JOHNY
73 2020 OCT RAJEEV NAIR
74 2020 OCT RAJEEV NAIR
75 2020 OCT RAJEEV NAIR
76 2020 OCT RAJEEV NAIR
77 2020 OCT RAJEEV NAIR
78 2020 OCT RAJEEV NAIR
79 2020 OCT RAJEEV NAIR
80 2020 OCT RAJEEV NAIR
81 2020 OCT RAJEEV NAIR
82 2020 OCT RAJEEV NAIR
83 2020 OCT RAJEEV NAIR
84 2020 OCT RAJEEV NAIR
85 2020 OCT RAJEEV NAIR
86 2020 OCT RAJEEV NAIR
87 2020 OCT RAJEEV NAIR
88 2020 OCT RAJEEV NAIR
89 2020 OCT RAJEEV NAIR
90 2020 OCT RAJEEV NAIR
91 2020 OCT RAJEEV NAIR
92 2020 OCT RAJEEV NAIR
93 2020 OCT SURNDRNTH
94 2020 OCT SURNDRNTH
95 2020 OCT SURNDRNTH
96 2020 OCT SURNDRNTH
97 2020 OCT SURNDRNTH
98 2020 OCT SURNDRNTH
99 2020 OCT SURNDRNTH
100 2020 OCT SURNDRNTH
101 2020 OCT SURNDRNTH
102 2020 OCT SURNDRNTH
103 2020 OCT SURNDRNTH
104 2020 OCT SURNDRNTH
105 2020 OCT TK
106 2020 OCT TK
107 2020 OCT TK
108 2020 OCT TK
109 2020 OCT TK
110 2020 OCT TK
111 2020 OCT VV JOHNY
112 2020 OCT VV JOHNY
113 2020 OCT VV JOHNY
114 2020 OCT VV JOHNY
115 2020 OCT VV JOHNY
116 2020 OCT VV JOHNY
117 2020 OCT VV JOHNY
118 2020 OCT VV JOHNY
119 2020 OCT VV JOHNY
120 2020 OCT VV JOHNY
121 2020 OCT VV JOHNY
122 2020 SEP SREEKUMR
123 2020 SEP SREEKUMR
124 2020 SEP SREEKUMR
125 2020 SEP SREEKUMR
126 2020 SEP SREEKUMR
127 2020 SEP SREEKUMR
128 2020 SEP SREEKUMR
129 2020 SEP SREEKUMR
130 2020 SEP SREEKUMR
131 2020 SEP SREEKUMR
132 2020 SEP SREEKUMR
133 2020 SEP SREEKUMR
134 2020 SEP SREEKUMR
135 2020 SEP SREEKUMR
136 2020 SEP SREEKUMR
137 2020 SEP SREEKUMR
138 2020 SEP SREEKUMR
139 2020 SEP SREEKUMR
140 2020 SEP SREEKUMR
141 2020 SEP SREEKUMR
142 2020 SEP SREEKUMR
143 2020 SEP SREEKUMR
144 2020 SEP SREEKUMR
145 2020 SEP SREEKUMR
146 2020 SEP SREEKUMR
147 2020 SEP SUBBU
148 2020 SEP SUBBU
149 2020 SEP SUBBU
150 2020 SEP SUBBU
151 2020 SEP SUBBU
152 2020 SEP SUBBU
153 2020 SEP SUBBU
154 2020 SEP SUBBU
155 2020 SEP SUBBU
156 2020 SEP SUBBU
157 2020 SEP SUBBU
158 2020 SEP SUBBU
159 2020 SEP SUBBU
160 2020 SEP SUBBU
161 2020 SEP SUBBU
162 2020 SEP SUBBU
163 2020 SEP SUBBU
164 2020 SEP SUBBU
165 2020 SEP SUBBU
166 2020 SEP SUBBU
167 2020 AUG SUBBU
168 2020 AUG SUBBU
169 2020 AUG SUBBU
170 2020 AUG SUBBU
171 2020 AUG SUBBU
QUESTION
Kirchhoff's laws
Alternator safeties
Overcurrent relay diagram and working
3 dark lap method
Thermocouple, types and where used onboard
No of generator, Rating, why kvar
Apparent power, reactive power, real power
Power factor
Overload trip, what input is given to overload trip
How to set overload trip, what is the value
What is Synch current, synchronsation torque when two generators are running parallel
How you adjust kvar
Powerfactor, kva, kw, kvar
How you take gen onload if auto/man sycnhro not working
Autotransformer
Lyods requriremnt for shore connection
EBS and MSB connection
3 point starter for DC motor
difference b/w contactor and relay
adv and disadv of squirrel cage induction motors and slip ring induction motor
types of avr, draw static avr
Generator rating
KW and KVA
Steering gear regulation and
Checks
Safeties on motor
Rating of generator
Difference of kw and Kva rating
Safeties on acb
What happen when there are two earth faults
Safeties on motor for the machinery and for personal
Checks to be made on a motor lying dead
If u have a battery 24v and a supply 24v dc how to cheats the battery
Later Paul sir asked to explain fixed gas detection system for pump room
Full wave rectifier
DC motor types and application
Resonance
Faradays law
Megger draw.
Full wave rectifier draw
Emergency generator auto starting. Test.
Bright lamp method.
Synchronous motor types and speed control.(name only)
Single phasing.and protection.
Main diff bw slipring induction and squirrel cage I duction motor ..
cogging and crawling of motor
three point and four point starter diagram and explain for DC motor
electrodynamic brake sloping in provision crane ,electrical reason .he wanted to hear relay
malfunctioning
esb and msb connections in msb from 440v to 24 volt including 220 consumers ...not line diagram ..
how static electricity produced and when it happens
What is synchronising current
ACB safeties
Reverse power trip
Emergency batteries load test
Alternator ratings/ overload trip settings
Fault finding after tripping of a motor.
power supply of a ship
working principle of 3 ph induction motor
working principle of transformer
adv of AC over DC
what is happening when we press auto synch on incoming generator
why ac voltage as 110, 220, 440
TP of a motor
Sequential order when black out happens
whether stby AE or emcy gen comes on load first?
in black out situation, emcy generator on load how you connect a main gen
what is the name of the device used for that
what all condition reverse power acitivates
Emergency generator on load test
Tie braker drwng with how it is working
Clamp meter working
Wot all checks u do in a motor ( IR test explained , he needs with drwng )
What are your ships electrical specifications?
What is high voltage system and what are the uses?
What is frequency?
Difference between synchronous and induction motor?
Working of induction motor and all its principles including Lenz law. Plenty cross like how the rotating magnetic field produced
What are the problems you see in motor? Why overload happens and what will happen when overloading happens to the win
Working of transformer and Autotransformer working?
What is the use of ac in respect to dc?
What are intrinsic safe equipment’s and its principle. Explain Zener barrier.
Why we are doing the IR test. Factors affecting the motor winding.
Steering gear motor safeties. What is different from other motors?
What is redundancy?
What are MSB safeties?
What is single phasing?
What is the insulation we used in induction motor winding and its thickness?
How you check the Insulation resistance?
What is the type of neutral system used in your ship and what is for less voltage equipment’s? What are the uses of both earth
Deck crane safeties?
Reverse power trip?
What are the latest innovations in the electrical industry?
Sketch and explain star delta starter
Advantages and disadvantages of star delta
Different types of AVR, explain static AVR
What is voltage trimmer and where is the location?
What are diifferent types of transformers? Explain current transformer
What is auto transformer?
Construction of squirrel cage and slip ring IM. Advantages and disadvantages of both
Electrical safeties in deck crane.
Explain electromagnetic brake
What is Ex protection and what are the types of Ex protection?
How is the flame and explosion contained inside the enclosure?
Difference between contactor and relay
RP in detail and how to adjust it
lossed in transformer, hysterisis loss in detail
offset in proportional
negative feed back signal
PLC and where it is used
how to test IR of alternator
alternator specs(why it is rated in kva, what is the kw showing on the meter ,he asked abt how you knw the power factor )
How battery is connected to the msb ? Does the load will work even if v remove battery?
Working of induction motor? Why v use star delta starter? How the change frm star to delta happens, what if change doesn't
safeties in MCB?
intrensic safety?
powerfactor, kva kw kvar?
how current difference in parallel generators corrected, what if not corrected?
soft starter?
how ammeter is connected to msb? How will you measure current if it is not there ? Does ammeter measures all 3 phases? W
What is the short circuit protection given for alternator( i explained IDMT)
How main engine rpm shown in ecr, he want the full circuit..from pick up sensor to digital display
alternator manual synchronisation working good but auto synchronisation not working.. reasons..?
alternator rutine maintenance by electrical officer.
star delta starter with control ckt.
alternator protection names only.
lead acid battery, checks, chemical reaction.
short ckt, open ckt, Earth fault.
Earth fault detection methods.
High voltage equipment safety checks.
why we use HV.
ship transformer connection. ,why star connected?
pump motor vibration (electrical)reasons?
fues?
motor enclosure types
relation between kva, kvar, kw
explain each with proper explanation
power factor of your ship
2 gen running parallel with two different pf, how does it happen, how to correct what are the problems
dry dock prep (no ETO onboard)
types of battery in your ship and rating
explain difference between alkaline and acidic battery
which battery you will choose
battery charging circuit
high voltage system, adv and disadv, precautions
overhauling of IM (tests before overhaul)
ac motoe starting, explain speed control of AC motor
Star Delta
Intrinsic safety
Ward Leonard
Synchronous motor /speed control
Electromagnetic brake
dol starter
battery charging circuit
HV safeties
alternator safties
Reverse power trip
transformer emf equation
Battery room safety
Alternator EMF equation
Transformer open and close circuit test
Single phase motor starting method
Thermocouple and different types
Synch motor working
Synchronous motor speed control
VFD
Starting methods for synchronous motor
Battery room safeties
Alternator safeties
OC relay
Intrinsic safety
Types of dc motors and its applications
ng magnetic field produced and why there is a negative in the Lenz law etc?
oading happens to the windings?
ns, what if change doesn't happen , what happen to speed and current?
measures all 3 phases? What if you measure all 3 lines in the motor together with clampmeter ?
The primary application of vacuum systems is for the evacuation of air and other
noncondensable gases from the shell side and the waterbox side of a steam surface
condenser. On the shell side, the vacuum equipment is used for two purposes: rapid
evacuation of air to reduce condenser pressure before steam turbine start or for
continuous removal of air and associated water vapor from the main condenser when the
steam turbine is in operation.
The removal of air and other noncondensable gases from the condenser shell side is
required for proper heat transfer from steam to cooling water in the condenser and, thus,
to maintain high vacuum in the condenser. This, in turn, enhances the amount of energy
extracted from the steam exhausted from the steam turbine and increases the plant’s
energy production. Without a vacuum system, air and other noncondensable gases would
severely reduce the heat transfer in the condenser, and the plant would require a
condenser with significantly more surface area for the same thermal load.