Security Level RTWP Troubleshooting Uide
Security Level RTWP Troubleshooting Uide
RTWP Troubleshooting
Guide
RTWP=P_in=
P_out - Gain
P_out
P_in
Configuration
Main level and diversity level and uplink/downlink balance class (2G)
The green line indicates the MeanRTWP, the yellow line indicates
the MinRTWP, and the blue line the CellDCHUEs (number of This figure shows that the RTWP continuously rises by more
users in a cell). This figure shows that the RTWP continuously than 15 dB when only a few users are connected. In this
rises by more than 5 dB when no user is connected at night. In case, the cell is affected by continuous external interference.
this case, the cell is affected by continuous external interference. In this situation, you cannot determine the relationship
The causes for the abnormal RTWP rise cannot be the RF
between the RTWP and the number of users. Check
channel configuration or the distributed RRU networking because
the minimum RTWP of the background noise in the day
whether the RF channel parameters are configured correctly.
decreases to a normal value.
The green line indicates the MeanRTWP, the yellow line indicates the MinRTWP, and the blue line the
CellDCHUEs (number of users in a cell). This figure shows that the RTWP rises by more than 10 dB in
cells 2 and 3 where many users are served. Such an RTWP rise may be caused if the air interface
capacity is limited. In cell 1 where only a few users are served, however, if the RTWP rises more than
10 dB, the neighboring cell interference may exist.
This figure shows that the RTWP rises by about 15 dB when the number of users is
large and decreases to the normal value when the number of users is small. In the
cell, the number of users is about 50. In this case, the air interface capacity may be
limited.
16
14
12
10
-2
• Traffic capacity
• The abnormal RTWP rise is directly caused after the user
uplink load increases. For example, when the uplink load
reaches the capacity threshold of a cell, the RTWP rises
to the maximum. If the admission control algorithm is
disabled, the RTWP stays high continuously in the high
traffic cell due to severe capacity overloading.
• The service volume fluctuates with time. Therefore, the
RTWP peaks vary according to time with moderate
change margin. The change trend of RTWP is consistent
with that of service volume.
Traffic evaluation tool