Scribd Logo
Upload

Welcome to Scribd!

  • 4140D Motor Grader: Tough World. Tough Equipment

    Uploaded by

    Amirul Wiyatno
    139 views2 pages
    This document summarizes the specifications of a Cummins 6BTAA5.9-C160 motor grader. It has a rated power of 118 kW (158 hp) and maximum torque of 670 N·m. Key dimensions include a wheelbase of 5,930 mm and overall length of 8,440 mm. Standard moldboard length is 3,660 mm with a thickness of 19 mm. Operating weight is 12,600 kg with service capacities including 348 L fuel tank and 165 L hydraulic reservoir.

    Original Description:

    -

    Original Title

    20220407102622

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document summarizes the specifications of a Cummins 6BTAA5.9-C160 motor grader. It has a rated power of 118 kW (158 hp) and maximum torque of 670 N·m. Key dimensions include a wheelbase of 5,930 mm and overall length of 8,440 mm. Standard moldboard length is 3,660 mm with a thickness of 19 mm. Operating weight is 12,600 kg with service capacities including 348 L fuel tank and 165 L hydraulic reservoir.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    139 views2 pages

    4140D Motor Grader: Tough World. Tough Equipment

    Uploaded by

    Amirul Wiyatno
    This document summarizes the specifications of a Cummins 6BTAA5.9-C160 motor grader. It has a rated power of 118 kW (158 hp) and maximum torque of 670 N·m. Key dimensions include a wheelbase of 5,930 mm and overall length of 8,440 mm. Standard moldboard length is 3,660 mm with a thickness of 19 mm. Operating weight is 12,600 kg with service capacities including 348 L fuel tank and 165 L hydraulic reservoir.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 2

    Engine Cummins 6BTAA5.

    9-C160
    Rated Power 118 kW (158 hp / 160 ps) @ 2,200 rpm
    Blade Width 3,660 mm
    4140D
    Maximum Speed
    Draw Bar Pull
    42 km/h
    65 kN MOTOR
    GRADER
    Operating Weight 12,600 kg

    T O U GH W O R LD. T O UGH EQ U IP ME N T.
    4140D
    SPECIFICATIONS >>>

    ENGINE MOLDBOARD PERFORMANCE


    Emission Regulation Tier 2 / Stage II Bank Cut Angle 28~74°
    Manufacturer Cummins Moldboard Lift Above Ground 520 mm
    Model 6BTAA5.9-C160 Moldboard Side Shift, right / left 390 / 780 mm
    Rated Power 118 kW (158 hp / 160 ps) @ 2,200 rpm Maximum Sloping Angle 90°
    Maximum Torque 670 N·m Cutting Depth 600 mm
    Number of Cylinders 6 Circle Rotation 360°
    Aspiration Turbo & air-to-air intercooled Circle Diameter 1,265 mm
    Circle Thickness 130 mm
    TRANSMISSION
    Transmission Type Power shift DIMENSIONS
    Torque Converter Three - member single turbine Wheelbase 5,930 mm
    Maximum Travel Speed, fwd 42 km/h Overall Length 8,440 mm
    Maximum Travel Speed, rev 26.5 km/h Overall Height with Cab 3,350 mm
    Number of Speeds, fwd 6 Clearance under Front Axle 577 mm
    Number of Speeds, rev 3 Moldboard Standard Length 3,660 mm
    Moldboard Standard Thickness 19 mm
    AXLES Moldboard Standard Height 550 mm
    Differential Type Limited slip standard
    Final Drive Type Chain drive OPERATING WEIGHTS
    Axle Oscillation 16° Operating Weight 12,600 kg
    Front Axle, Wheel Lean Angle Left / right 18°
    SERVICE CAPACITIES
    STEERING Fuel Tank 348 L
    Steering Configuration Load sensor steering gear Engine Oil 18 L
    Steering Relief Pressure 16.7 MPa Cooling System 35 L
    Minimum Turning Radius 6,900 mm Hydraulic Reservoir 165 L
    Steering Angle ±50° Transmission and Torque Converter 33 L
    Frame Articulation Angle ±27° Tandems, each 36 L

    BRAKES OPTIONAL EQUIPMENT


    Service Brake Type Clamp Rear Ripper
    Service Brake Location Rear axle Front Dozer
    Automatic Leveling System
    TIRES
    Rotary Beacon
    Tire Size 13.00-24
    Frictional Flake Worm Box
    HYDRAULIC SYSTEM
    Main Pump Type Gear
    Main Relief Pressure 20 MPa
    Main Pump Flow 122 L/min

    WORKING CAPACITIES
    Maximum Draw Pull 65 kN
    Cutting Pressure 6,000 kg

    TANDEM DRIVE PERFORMANCE


    Height 600 mm
    Width 210 mm
    Center Distance 1,553 mm

    Guangxi Liugong Machinery Co., Ltd. 04/2020 Designed by LiuGong


    No. 1 Liutai Road, Liuzhou, Guangxi 545007, PR China Replace the previous versions of 05/2019
    T: +86 772 3886124 E: [email protected]
    www.liugong.com
    Specifications and designs are subject to change without notice. Machines shown may include optional equipment. LiuGong standard and optional equipment may vary from region to region.
    Please consult your LiuGong dealer for information specific to your area. Engine power kW is converted to horsepower (1 kW=1.3596 ps and 1 kW=1.3410 hp) in this file.

    You might also like