INTERNATIONAL OIL POLLUTION PREVENTION CERTIFICATE

No. 102994-V001-008

(Note: This Certificate shall be supplemented by a Record of Construction and Equipment)

Supplement No. 102994-V001-008 - R

issued under the provisions of the RINA No. 102994

INTERNATIONAL CONVENTION FOR THE PREVENTION
OF POLLUTION FROM SHIPS, 1973,
as modified by the Protocol of 1978 relating thereto, as amended,
(hereinafter referred to as "the Convention")

under the authority of the Government of the

Republic of Liberia
by

RINA SERVICES S.p.A.

Name of ship Distinctive number or Port of registry Gross tonnage

letters

OCEANBEAUTY D5CQ3 MONROVIA 33049

Deadweight of ship (tonnes) ¹ IMO Number ²

- 9641338

Type of ship:

Oil tanker

Ship other than an oil tanker with cargo tanks coming under Regulation 2.2 of Annex I of the Convention

Ship other than any of the above

THIS IS TO CERTIFY:

1 That the ship has been surveyed in accordance with Regulation 6 of Annex I of the Convention.

2 That the survey shows that the structure, equipment, systems, fittings, arrangement and material of the ship and the condition thereof
are in all respects satisfactory and that the ship complies with the applicable requirements of Annex I of the Convention.

1 For oil tankers

2 In accordance with the IMO Ship Identification Number Scheme, adopted by the Organization by Resolution A.600(15).

UTN: SKC8NG2MXYYEJO1

Form IOPPC_LBR - 04/2018 - LS This certificate consists of 5 pages

IMO No. 9641338 Name of ship OCEANBEAUTY Certificate No. 102994-V001-008 Page 2 / 5

This certificate is valid until: 30 January 2023 ¹

subject to surveys in accordance with Regulation 6 of Annex I of the Convention.

Completion date of the survey on which this certificate is based 03 April 2022

Issued at: BUENOS AIRES on 06 April 2022

This is an electronically signed document in accordance with IMO FAL.5/Circ.39

and does not require a handwritten signature.
Validation and authentication of the paper printout may be obtained from
https://ecertificate.rina.org
Villen Gustavo Andres

RINA SERVICES S.p.A.

1 Insert the date of expiry as specified by the Administration in accordance with Regulation 10.1 of Annex 1 of the Convention. The day and the month of this date correspond to
the anniversary date as defined in Regulation 1.27 of Annex 1 of the Convention, unless amended in accordance with Regulation 10.8 of Annex 1 of the Convention.

UTN: SKC8NG2MXYYEJO1

Form IOPPC_LBR - 04/2018 - LS RINA No. 102994

IMO No. 9641338 Name of ship OCEANBEAUTY Certificate No. 102994-V001-008 Page 3 / 5

ENDORSEMENT FOR ANNUAL AND INTERMEDIATE SURVEYS

THIS IS TO CERTIFY that at a survey required by Regulation 6 of Annex I of the Convention the ship was found to comply with the relevant
provisions of the Convention.

Annual survey Signature and seal

Place XXX - Not Applicable - XXX: related to survey

activities carried out before this certificate was issued XXX - Not Applicable - XXX

Date XXX - Not Applicable - XXX

Annual / Intermediate (*) survey Signature and seal

Place XXX - Not Applicable - XXX: related to survey

activities carried out before this certificate was issued XXX - Not Applicable - XXX

Date XXX - Not Applicable - XXX

Annual / Intermediate (*) survey Signature and seal

Place XXX - Not Applicable - XXX: related to survey

activities carried out before this certificate was issued XXX - Not Applicable - XXX

Date XXX - Not Applicable - XXX

Annual survey Signature and seal

Place XXX - Not Applicable - XXX: related to survey

activities carried out before this certificate was issued XXX - Not Applicable - XXX

Date XXX - Not Applicable - XXX

(*) Delete as appropriate

UTN: SKC8NG2MXYYEJO1

Form IOPPC_LBR - 04/2018 - LS RINA No. 102994

IMO No. 9641338 Name of ship OCEANBEAUTY Certificate No. 102994-V001-008 Page 4 / 5

ANNUAL / INTERMEDIATE SURVEY IN ACCORDANCE WITH REGULATION 10.8.3

THIS IS TO CERTIFY that, at an annual / intermediate(*) survey in accordance with Regulation 10.8.3 of Annex I of the Convention, the
ship was found to comply with the relevant provisions of the Convention.

Place Signature and seal

Date

Endorsement to extend the certificate if valid for less than 5 years where Regulation 10.3 applies.
This ship complies with the relevant provisions of the Convention, and this certificate shall, in
accordance with Regulation 10.3 of Annex I of the Convention, be accepted as valid until

Place Signature and seal

Date

Endorsement where the renewal survey has been completed and Regulation 10.4 applies
The ship complies with the relevant provisions of the Convention, and this certificate shall, in
accordance with Regulation 10.4 of Annex I of the Convention, be accepted as valid until

Place Signature and seal

Date

(*) Delete as appropriate

UTN: SKC8NG2MXYYEJO1

Form IOPPC_LBR - 04/2018 - LS RINA No. 102994

IMO No. 9641338 Name of ship OCEANBEAUTY Certificate No. 102994-V001-008 Page 5 / 5

Endorsement to extend the validity of the certificate until reaching the port of survey
or for a period of grace where Regulation 10.5 or 10.6 applies
This certificate shall, in accordance with Regulation 10.5 / 10.6 (*) of Annex I of the Convention,
be accepted as valid until

Place Signature and seal

Date

Endorsement for advancement of anniversary date where Regulation 10.8 applies

In accordance with Regulation 10.8 of Annex I of the Convention, the new anniversary date is

Place Signature and seal

Date

In accordance with Regulation 10.8 of Annex I of the Convention, the new anniversary date is

Place Signature and seal

Date

(*) Delete as appropriate

UTN: SKC8NG2MXYYEJO1

Form IOPPC_LBR - 04/2018 - LS RINA No. 102994

 SUPPLEMENT TO THE INTERNATIONAL OIL POLLUTION PREVENTION CERTIFICATE
No. 102994-V001-008 - R

RECORD OF CONSTRUCTION AND EQUIPMENT FOR SHIPS OTHER THAN OIL TANKERS
in respect of the provision of Annex I of the International Convention for the Prevention of Pollution from Ships, 1973, as modified by the
Protocol of 1978 relating thereto (hereinafter referred to as "the Convention").
Notes: 1 This form is to be used for the third type of ships as categorized in the IOPP Certificate, i.e. "ships other than any of the above". For oil tankers
and ships other than oil tankers with cargo tanks coming under regulation 2(2) of Annex I of the Convention, form B shall be used.
2 This record shall be permanently attached to the IOPP Certificate. The IOPP Certificate shall be available on board the ship at all times.
3 If the language of the original Record is neither English nor French, the text shall include a translation into one of these languages.
4 Entries in boxes shall be made by inserting either a cross ( x ) for the answer "yes" and "applicable" or a dash ( - ) for the answer "no" and "not
applicable" as appropriate.
5 Unless otherwise stated, regulations mentioned in this Record refer to regulations of Annex I of the Convention and Resolutions refer to those
adopted by the International Maritime Organization.

1. Particulars of ship IMO Number 9641338 RINA No. 102994

1.1 Name of ship OCEANBEAUTY
1.2 Distinctive number or letters D5CQ3
1.3 Port of registry MONROVIA
1.4 Gross tonnage 33049
1.5 Date of build:
1.5.1 Date of building contract
1.5.2 Date on which keel was laid or ship was at similar stage of construction 23 April 2012
1.5.3 Date of delivery 31 January 2013
1.6 Major conversion (if applicable):
1.6.1 Date of conversion contract
1.6.2 Date on which conversion was commenced
1.6.3 Date of completion of conversion

1.7 The ship has been accepted by the Administration as a "ship delivered on or before 31 December 1979" under
Regulation 1.28.1 due to unforeseen delay in delivery

2. Equipment for the control of oil discharge from machinery space bilges and oil fuel tanks (Regulations 16 and 14)

2.1 Carriage of ballast water in oil fuel tanks:

2.1.1 The ship may under normal conditions carry ballast water in oil fuel tanks

2.2 Type of oil filtering equipment fitted:

2.2.1 Oil filtering (15 ppm) equipment (Regulation 14.6)

2.2.2 Oil filtering (15 ppm) equipment with alarm and automatic stopping device (Regulation 14.7)

2.3 Approval standards: [1]

2.3.1 The separating / filtering equipment:

.1 has been approved in accordance with Resolution A.393(X)

.2 has been approved in accordance with Resolution MEPC 60(33)

.3 has been approved in accordance with Resolution MEPC 107(49)

.4 has been approved in accordance with Resolution A.233(VII)

.5 has been approved in accordance with national standards not based upon Resolution A.393(X) or
A.233(VII)
.6 has not been approved

2.3.2 The process unit has been approved in accordance with Resolution A.444(XI)

2.3.3 The oil content meter:

.1 has been approved in accordance with Resolution A.393(X)

.2 has been approved in accordance with Resolution MEPC 60(33)

.3 has been approved in accordance with Resolution MEPC 107(49)

UTN: SKC8NG2MXYYEJO1

Form IOPPC_Supp_A - 05/2018 - LS This certificate consists of 3 pages

IMO No. 9641338 Name of ship OCEANBEAUTY Supplement No. 102994-V001-008 - R Page 2 / 3

2.4 Maximum throughput of the system is 5 m³/h

2.5 Waiver of Regulation 14:

2.5.1 The requirements of Regulation 14.1 or 14.2 are waived in respect of the ship in accordance with Regulation
14.5.
2.5.1.1 The ship is engaged exclusively on voyages within special area(s):

2.5.1.2 The ship is certified under the international code of safety for high speed craft and engaged on a
scheduled service with a turn-around time not exceeding 24 hours
2.5.2 The ship is fitted with holding tank(s) for the total retention on board of all oily bilge water as follows:

Tank location
Tank identification Frames (from) - (to) Lateral position Volume (m³)

Total volume

2A Oil fuel tank protection (Regulation 12A)

2A.1 The ship is required to be constructed according to Regulation 12A and complies with the requirements of:

- paragraphs 6 and either 7 or 8 (double hull construction)

- paragraph 11 (accidental oil fuel outflow performance)

2A.2 The ship is not required to comply with the requirements of Regulation 12A.

3. Means for retention and disposal of oil residues (sludge) (Regulation 12) and oily bilge water holding tank(s) [2]

3.1 The ship is provided with oil residue (sludge) tanks for retention of oil residues (sludge) on board as follows:

Tank location
Tank identification Frames (from) - (to) Lateral position Volume (m³)
Sludge Tank 28-34 Starboard 18.40
F.O.Drain Tank 23-28 Port 7.40
Incinerator Sludge Service Tank 13-15 Sarboard 1.10
Waste Oil Tank 23-31 Starboard 16.40
Total volume 43.30 m³

3.2 Means for disposal of oil residues (sludge) retained in oil residues (sludge) tanks

3.2.1 Incinerator for oil residues(sludge)

3.2.2 Auxiliary boiler suitable for burning oil residues (sludge)

3.2.3 Other acceptable means, state which:

3.3 The ship is provided with holding tank(s) for the retention on board of oily bilge water as follows:

Tank location
Tank identification Frames (from) - (to) Lateral position Volume (m³)
Bilge Honling Tank 28-35 Port 33.70
Total volume 33.70 m³

4. Standard discharge connection (Regulation 13)

4.1 The ship is provided with a pipeline for the discharge of residues from machinery bilges and sludges to reception
facilities, fitted with a standard discharge connection in accordance with Regulation 13

5. Shipboard oil/marine pollution emergency plan (Regulation 37)

5.1 The ship is provided with a shipboard oil pollution emergency plan in compliance with Regulation 37

5.2 The ship is provided with a shipboard marine pollution emergency plan in compliance with Regulation 37.3

UTN: SKC8NG2MXYYEJO1

Form IOPPC_Supp_A - 05/2018 - LS RINA No. 102994

IMO No. 9641338 Name of ship OCEANBEAUTY Supplement No. 102994-V001-008 - R Page 3 / 3

6. Exemption

6.1 Exemptions have been granted by the Administration from the requirements of Chapter 3 of Annex I of the Convention
in accordance with Regulation 3.1 on those items listed under the following paragraph(s) of this Record

7. Equivalents (Regulation 5)

7.1 Equivalents have been approved by the Administration for certain requirements of Annex I on those items listed under
the following paragraph(s) of this Record

8. Compliance with part II-A-Chapter 1 of the Polar Code

8.1 The ship is in compliance with additional requirements in the environment-related provisions of the introduction and
section 1.2 of chapter 1 of part II-A of the Polar Code

THIS IS TO CERTIFY that this record is correct in all respects.

Issued at: BUENOS AIRES on 06 April 2022

This is an electronically signed document in accordance with IMO FAL.5/Circ.39

and does not require a handwritten signature.
Validation and authentication of the paper printout may be obtained from
https://ecertificate.rina.org
Villen Gustavo Andres

RINA SERVICES S.p.A.

[1] Refer to the Recommendation on international performance and test specifications of oily-water separating equipment and oil content meters adopted by the Organization on
14 November 1977 by resolution A.393(X), which superseded resolution A.233(VII). Further reference is made to the Guidelines and specifications for pollution prevention
equipment for machinery space bilges adopted by the Marine Environment Protection Committee of the Organization by resolution MEPC.60(33), which, effective on 6 July
1993, superseded resolutions A.393(X) and A.444(XI)(see IMO sales publication IMO-646E); and to the revised Guidelines and specifications for pollution prevention
equipment for machinery spaces of ships adopted by the Marine Environment Protection Committee of the Organization by resolution MEPC.107(49) which, effective on 1
January 2005, superseded resolutions MEPC.60(33), A.393(X) and A.444(XI)
[2] Oily bilge water holding tank(s) are not required by the Convention; if such tank(s) are provided they shall be listed in Table 3.3

UTN: SKC8NG2MXYYEJO1

Form IOPPC_Supp_A - 05/2018 - LS RINA No. 102994