Hfe Marantz nr1603 Service en

NR1603 /U1B,K1B
Service N1SG,N1B
Manual AV Surround Receiver
• For purposes of improvement, specifications and design are subject to change without notice.
• Please use this service manual with referring to the operating instructions without fail.
• Some illustrations using in this service manual are slightly different from the actual set.
Ver. 4
NR1603 Please refer to the
MODIFICATION NOTICE.
S0784-1V04DM/DG1401
START::|g1cz3Z09ximWbk6cjE4rRA= I=|0dJOV4mYW/CiniRHVGurT
CONTENTS
ABOUT THIS MANUAL..............................................................3 SIDE_CNT ............................................................................118
What you can do with this manual.............................................3 REG_CNT .............................................................................118
Using Adobe Reader (Windows version)...................................4 USB........................................................................................118
SAFETY PRECAUTIONS...........................................................7 H/P.........................................................................................118
NOTE FOR SCHEMATIC DIAGRAM..........................................8 FRONT ..................................................................................119
AV ..........................................................................................120
TECHNICAL SPECIFICATIONS.................................................9
HDMI .....................................................................................121
DIMENSION................................................................................9
FRONT ..................................................................................122
CAUTIONS IN SERVICING......................................................10
SCHEMATIC DIAGRAMS ......................................................123
Initializing AV Surround Receiver.............................................10
HDMI SW UNIT......................................................................123
Service Jig ...............................................................................10
FRONT HDMI UNIT...............................................................124
DISASSEMBLY.........................................................................11 HDMI RX UNIT.......................................................................125
1. FRONT PANEL ASSY..........................................................12 HDMI TX UNIT.......................................................................126
2. RADIATOR ASSY.................................................................14 HDMI TX DDR UNIT..............................................................127
3. REG ASSY...........................................................................16 DSP UNIT...............................................................................128
4. PCB RC5_MX......................................................................17 DIR/PLD UNIT........................................................................129
5. PCB HDMI ASSY.................................................................18 MAIN DAC UNIT....................................................................130
6. POWER TRANS MAIN.........................................................19 DM860A UNIT........................................................................131
7. AV ASSY...............................................................................21 NET PHY UNIT......................................................................132
8. PCB SMPS...........................................................................21 CPU UNIT..............................................................................133
9. PCB SPK..............................................................................22 CPU LEVEL CHG UNIT.........................................................134
SPECIAL MODE.......................................................................23 DIGITAL CNT UNIT................................................................135
Special mode setting button.....................................................23 D.SUPPLY UNIT....................................................................136
1. µcom/DSP Version display mode.........................................24 7CH-AMP UNIT (1/2).............................................................137
2. PANEL/REMOTE LOCK Selection mode.............................28 7CH-AMP UNIT (2/2).............................................................138
3. Service Related Selection mode .........................................29 SPK_SMPS UNIT (1/2)..........................................................139
4. DUAL BACKUP MEMORY...................................................37 SPK_SMPS UNIT (1/2)..........................................................140
BLOCK DIAGRAM....................................................................39 AUDIO_VIDEO UNIT (1/3).....................................................141
JIG FOR SERVICING...............................................................55 AUDIO_VIDEO UNIT (2/3).....................................................142
WHEN THE MICROPROCESSOR IS REPLACED AUDIO_VIDEO UNIT (3/3).....................................................143
FRONT UNIT..........................................................................144
WITH A NEW ONE....................................................................58
USB UNIT..............................................................................144
PROCEDURE FOR UPGRADING THE VERSION
H/P UNIT................................................................................144
OF THE FIRMWARE.................................................................58 REG UNIT (1/4)......................................................................145
1. How to update by DFW........................................................58 REG UNIT (2/4)......................................................................146
2. How to update by DPMS......................................................62 REG UNIT (3/4)......................................................................147
3. How to update by USB Memory...........................................69 REG UNIT (4/4)......................................................................148
ADJUSTMENT..........................................................................76 WIRING DIAGRAM.................................................................149
SURROUND MODES AND PARAMETERS.............................77 EXPLODED VIEW...................................................................150
TROUBLE SHOOTING.............................................................81 PARTS LIST OF EXPLODED VIEW ......................................151
1. POWER................................................................................81
PACKING VIEW .....................................................................154
2. Analog video.........................................................................82
PARTS LIST OF PACKING & ACCESSORIES .....................155
3. HDMI/DVI.............................................................................89
4. AUDIO..................................................................................97 SEMICONDUCTORS..............................................................156
5. Network/USB......................................................................100 1. IC's.....................................................................................156
6. SMPS.................................................................................103 2. FL DISPLAY.......................................................................186
CLOCK FLOW & WAVE FORM IN DIGITAL BLOCK............106 PARTS LIST OF PCB UNIT ...................................................189
7CH_AMP PCB UNIT ASS'Y..................................................189
LEVEL DIAGRAM...................................................................107
SPK PCB UNIT ASS'Y...........................................................194
PRINTED WIRING BOARDS..................................................113
REG_CNT PCB UNIT ASS'Y.................................................197
7CH AMP ..............................................................................113
FRONT PCB UNIT ASS'Y......................................................199
SPK .......................................................................................114
AV PCB UNIT ASS'Y..............................................................201
SPMS ....................................................................................116
HDMI PCB UNIT ASS'Y.........................................................203
RC5_MX ................................................................................116
REG ......................................................................................117
FRONT_CNT ........................................................................117
2
ABOUT THIS MANUAL
Read the following information before using the service manual.
What you can do with this manual
Search for a Ref. No. (phrase) Jump to the target of a schematic diagram
(Ctrl+Shift+F) connector
You can use the search function in Acrobat Reader to

Click the Ref. No. of the target connector in the red box
search for a Ref. No. in schematic diagrams, printed
wiring board diagrams, block diagrams, and parts lists. around a schematic diagram connector.
• The screen jumps to the target connector.
1.Press Ctrl+Shift+F on the keyboard.
• The Search window appears.
Shift
Ctrl
2.Enter the Ref. No. you want to search for in the

Search window, and then click the Search button.
• A list of search results appears.
• Page magnification stays the same as before the

jump.
3.Click an item on the list.

• The screen jumps to the page for that item, and
the search phrase is displayed.
3
Using Adobe Reader (Windows version)
Add notes to this data (Sign) Magnify schematic / printed wiring board
The Sign function lets you add notes to the data in this diagrams - 1
manual. (Ctrl+Space, mouse operation)
Save the file once you have finished adding notes.
[Example using Adobe Reader 9,X]
Press Ctrl+Space on the keyboard and drag the
[Example using Adobe Reader X]
mouse to select the area you want to view.
On the "View" menu, click "Sign".
• The selected area is magnified.
• The Sign pane appears.
Ctrl Space
• When you want to move the area shown, hold down

Space and drag the mouse.
[Example using Adobe Reader 9]
• When you want to show a full page view, press
On the "Document" menu, click "Sign".
Ctrl+0 on the keyboard.
Print a magnified part of the manual

The Properties dialog box and functions will vary depending on your printer.
1. Drag the mouse to magnify the part you want to print.
2. On the "File" menu, click "Print".
3. Configure the following settings in the Print dialog box.
• Properties
Click this button and check that the printer is set to a
suitable paper size.
• Page to print
Select the following checkbox.
"More Options" : "Current View"
• Page Sizing & Handling
Select the following checkbox.
"Size" / "Size Options" : "Fit"
4. Click the Print button to start printing.
4
Magnify schematic / printed wiring board Magnify schematic / printed wiring board
diagrams - 2 diagrams - 3
(Pan & Zoom function) (Loupe Tool function)
The Pan & Zoom function lets you see which part of a The Loupe Tool function lets you magnify a specific
magnified diagram is being shown in a separate window. part of a diagram in a separate window.
[Example using Adobe Reader X] [Example using Adobe Reader X]

On the "View" menu, point to "Zoom", and then click On the "View" menu, point to "Zoom", and then click
"Pan & Zoom". "Loupe Tool".
• The Pan & Zoom window appears on the screen. • The Loupe Tool window appears on the screen.
[Example using Adobe Reader 9] [Example using Adobe Reader 9]

On the "Tools" menu, point to "Select & Zoom", and On the "Tools" menu, point to "Select & Zoom", and
then click "Pan & Zoom Window". then click "Loupe Tool Window".
5
MARANTZ DESIGN AND SERVICE
Using superior design and selected high grade components, MARANTZ company has created the ultimate in stereo sound.
Only original MARANTZ parts can insure that your MARANTZ product will continue to perform to the specifications for
which it is famous.
Parts for your MARANTZ equipment are generally available to our National Marantz Subsidiary or Agent.
ORDERING PARTS :
Parts can be ordered either by mail or by Fax.. In both cases, the correct part number has to be specified.
The following information must be supplied to eliminate delays in processing your order :
1. Complete address
2. Complete part numbers and quantities required
3. Description of parts
4. Model number for which part is required
5. Way of shipment
6. Signature : any order form or Fax. must be signed, otherwise such part order will be considered as null and void.
USA EUROPE / TRADING CANADA

MARANTZ AMERICA, INC D&M EUROPE B. V. D&M Canada Inc.
100 CORPORATE DRIVE P. O. BOX 8744, BUILDING SILVERPOINT 5-505 APPLE CREEK BLVD.
MAHWAH, NEW JERSEY 07430 BEEMDSTRAAT 11, 5653 MA EINDHOVEN MARKHAM, ONTARIO L3R 5B1
USA THE NETHERLANDS CANADA
PHONE : +31 - 40 - 2507844 PHONE : 905 - 415 - 9292
FAX : +31 - 40 - 2507860 FAX : 905 - 475 - 4159
JAPAN KOREA
D&M Holdings Inc. D&M SALES AND MARKETING KOREA LTD.
D&M BUILDING, 2-1 NISSHIN-CHO, 2F,YEON BLDG.,
KAWASAKI-KU, KAWASAKI-SHI, 88-5, BANPO-DONG, SEOCHO-GU,
KANAGAWA, 210-8569 JAPAN SEOUL KOREA
PHONE : +82 - 2 - 715 - 9041
FAX : +82 - 2 - 715 - 9040
CHINA
D&M SALES AND MARKETING SHANGHAI LTD.
ROOM.808 SHANGHAI AIRPORT CITY TERMINAL
NO.1600 NANJING (WEST) ROAD, SHANGHAI,
CHINA. 200040
TEL : 021 - 6248 - 5151
FAX : 021 - 6248 - 4434
NOTE ON SAFETY :
Symbol z Fire or electrical shock hazard. Only original parts should be used to replaced any part marked with symbol z .
Any other component substitution (other than original type), may increase risk of fire or electrical shock hazard.
安全上の注意：
z がついている部品は、安全上重要な部品です。必ず指定されている部品番号のものを使用して下さい。
SHOCK, FIRE HAZARD SERVICE TEST :

CAUTION : After servicing this appliance and prior to returning to customer, measure the resistance between either primary
AC cord connector pins (with unit NOT connected to AC mains and its Power switch ON), and the face or Front Panel of
product and controls and chassis bottom.
Any resistance measurement less than 1 Megohms should cause unit to be repaired or corrected before AC power is applied,
and verified before it is return to the user/customer.
Ref. UL Standard No. 60065.
In case of difficulties, do not hesitate to contact the Technical

Department at above mentioned address.
091105DM/DG
6
SAFETY PRECAUTIONS
The following items should be checked for continued protection of the customer and the service technician.
LEAKAGE CURRENT CHECK

Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the set is defective.
Be sure to test for leakage current with the AC plug in both polarities, in addition, when the set's power is in each state (on,
off and standby mode), if applicable.
CAUTION Please heed the following cautions and instructions during servicing and
inspection.
◎◎ Heed the cautions! ◎◎ Make a safety check after servicing!
Cautions which are delicate in particular for servicing Check that all screws, parts and wires removed or
are labeled on the cabinets, the parts and the chassis, disconnected when servicing have been put back in
etc. Be sure to heed these cautions and the cautions their original positions, check that no serviced parts
described in the handling instructions. have deteriorate the area around. Then make an
insulation check on the external metal connectors and
◎◎ Cautions concerning electric shock!
between the blades of the power plug, and otherwise
(1) An AC voltage is impressed on this set, so if
check that safety is ensured.
you touch internal metal parts when the set is
energized, you may get an electric shock. Avoid (Insulation check procedure)
getting an electric shock, by using an isolating Unplug the power cord from the power outlet,
transformer and wearing gloves when servicing disconnect the antenna, plugs, etc., and on the power.
while the set is energized, or by unplugging the Using a 500V insulation resistance tester, check that
power cord when replacing parts, for example. the insulation resistance value between the inplug and
(2) There are high voltage parts inside. Handle with the externally exposed metal parts (antenna terminal,
extra care when the set is energized. headphones terminal, input terminal, etc.) is 1MΩ or
greater. If it is less, the set must be inspected and
◎◎ Caution concerning disassembly and
repaired.
assembly!
Through great care is taken when parts were
manufactured from sheet metal, there may be burrs CAUTION Concerning important safety
on the edges of parts. The burrs could cause injury if
fingers are moved across them in some rare cases.
parts
Wear gloves to protect your hands. Many of the electric and the structural parts used in
◎◎ Use only designated parts! the set have special safety properties. In most cases
The set's parts have specific safety properties (fire these properties are difficult to distinguish by sight, and
resistance, voltage resistance, etc.). Be sure to use the use of replacement parts with higher ratings (rated
parts which have the same properties for replacement. power and withstand voltage) does not necessarily
The burrs have the same properties. In particular, for guarantee that safety performance will be preserved.
the important safety parts that are indicated by the z Parts with safety properties are indicated as shown
mark on schematic diagrams and parts lists, be sure to below on the wiring diagrams and the parts list in this
use the designated parts. service manual. Be sure to replace them with the parts
which have the designated part number.
◎◎ Be sure to mount parts and arrange the wires
as they were originally placed! (1) Schematic diagrams........Indicated by the z mark.
For safety seasons, some parts use tapes, tubes or (2) Parts lists........Indicated by the z mark.
other insulating materials, and some parts are mounted The use of parts other than the
designated parts could cause electric
away from the surface of printed circuit boards.
shocks, fires or other dangerous
Care is also taken with the positions of the wires by
situations.
arranging them and using clamps to keep them away
from heating and high voltage parts, so be sure to set
everything back as it was originally placed.
7
NOTE FOR SCHEMATIC DIAGRAM
WARNING:
Parts indicated by the z mark have critical characteristics. Use ONLY replacement parts recommended by the manufacturer.
CAUTION:
Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis resistance check. If
the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the set
is defective.
WARNING:
DO NOT return the set to the customer unless the problem is identified and remedied.
NOTICE:
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM / M=1,000,000 OHM
NOTE
ALL FOR PARTS
CAPACITANCE VALUES ARE LIST
EXPRESSED IN MICRO FARAD, UNLESS OTHERWISE INDICATED. P INDICATES MICRO-MICRO
FARAD. EACH VOLTAGE AND CURRENT ARE MEASURED AT NO SIGNAL INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT
TO CHANGE WITHOUT PRIOR NOTICE.
NOTE FOR PARTS LIST

1. Parts indicated by "nsp" on this table cannot be supplied.
2. When ordering a part, make a clear distinction between "1" and "I" (i) to avoid mis-supplying.
3. A part ordered without specifying its part number can not be supplied.
4. Part indicated by "★" mark is not illustrated in the exploded view.
5. General-purpose Carbon Film Resistor in the P.W.Board parts list. (Refer to the Schematic Diagram for those parts.)
6. General-purpose Carbon Chip Resistors are not included are not included in the P.W.Board parts list.
(Refer to the Schematic Diagram for those parts.)
WARNING: Parts indicated by the z mark have critical characteristics. Use ONLY replacement parts recommended by the manufacturer.
● Resistors
Ex.: RN 14K 2E 182 G FR
Type Shape Power Resist- Allowable Others
and per- ance error
formance
RD : Carbon 2B : 1/8 W F : ±1% P : Pulse-resistant type

RC : Composition 2E : 1/4 W G : ±2% NL : Low noise type
RS : Metal oxide film 2H : 1/2 W J : ±5% NB : Non-burning type
RW: winding 3A : 1 W K : ±10% FR : Fuse-resistor
RN : Metal film 3D : 2 W M : ±20% F : Lead wire forming
RK : Metal mixture 3F : 3 W
3H : 5 W
* Resistance
1 8 2 1800ohm=1.8kohm
Indicates number of zeros after effective number.
2-digit effective number.
1 R 2 1.2ohm
1-digit effective number.
2-digit effective number, decimal point indicated by R.
: Units: ohm
● Capacitors
Ex.: CE 04W 1H 3R2 M BP
Type Shape Dielectric Capacity Allowable Others
and per- strength error
formance
CE : Aluminum foil 0J : 6.3 V F : ±1% HS : High stability type

electrolytic 1A : 10 V G : ±2% BP : Non-polar type
CA : Aluminium solid 1C : 16 V J : ±5% HR : Ripple-resistant type
electrolytic 1E : 25 V K : ±10% DL : For change and discharge
CS : Tantalum electrolytic 1V : 35 V M : ±20% HF : For assuring high frequency
CQ : Film 1H : 50 V Z : ±80% U : UL part
CK : Ceramic 2A : 100 V : - 20% C : CSA part
CC : Ceramic 2B : 125 V P : +100% W : UL-CSA part
CP : Oil 2C : 160 V C : ±0.25pF F : Lead wire forming
CM: Mica 2D : 200 V D : ±0.5pF
CF : Metallized 2E : 250 V = : Others
CH : Metallized 2H : 500 V
2J : 630 V
* Capacity (electrolyte only)

2 2 2 2200μF 2 R 2 2.2μF
Indicates number of zeros after effective number. 1-digit effective number.
2-digit effective number. 2-digit effective number, decimal point indicated by R
･ Units:μF. ･ Units:μF.
* Capacity (except electrolyte)
2 2 2 2200pF=0.0022μF 2 2 1 220pF
Indicates number of zeros after effective number. (More than 2) Indicates number of zeros after effective number. (0 or 1)
2-digit effective number. 2-digit effective number.
･ Units:pF ･ Units:pF
･ When the dielectric strength is indicated in AC,"AC" is included after the dielectric strength value.
8
TECHNICAL SPECIFICATIONS
nnAudio Section nnTuner section
• Power amplifier [FM](Note: μV at 75 Ω, 0 dBf = 1 x 10–15 W)
Rated output : Receiving Range (for U model) :
Front : [FM] 87.5 MHz – 107.9 MHz
50 W + 50 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) Receiving Range (for N, K model) :
Center : [FM] 87.5 MHz – 108.0 MHz
50 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) Usable Sensitivity :
Surround : [FM]1.2 μV (12.8 dBf)
50 W + 50 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 50 dB Quieting Sensitivity (for U model) :
Surround back: [FM]MONO 2.8 μV (20.2 dBf)
50 W + 50 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 50 dB Quieting Sensitivity (for N, K model) :
Maximum effective output power: [FM]MONO 2.0 μV (17.3 dBf)
Front : STEREO 42 μV (34.5 dBf)
80 W + 80 W (6 Ω, 1 kHz with 10 % T.H.D.) S/N (IHF-A) (for U model) :
Center : [FM]MONO 70 dB (IHF–A weighted, DIRECT mode)
80 W (6 Ω, 1 kHz with 10 % T.H.D.) STEREO 67 dB (IHF–A weighted, DIRECT mode)
Surround : S/N (IHF-A) (for N, K model) :
80 W + 80 W (6 Ω, 1 kHz with 10 % T.H.D.) [FM]MONO 72 dB (IHF–A weighted, DIRECT mode)
STEREO 67 dB (IHF–A weighted, DIRECT mode)
Surround back:
Total harmonic Distortion (for U model) :
80 W + 80 W (6 Ω, 1 kHz with 10 % T.H.D.)
[FM]MONO 0.7 % (1 kHz)
Output connectors : 6 – 8 Ω
STEREO 1.0 % (1 kHz)
• Analog
Total harmonic Distortion (at 1 kHz) (for N, K model) :
Input sensitivity/Input impedance : 130 mV/47 kΩ
[FM]MONO 0.3 % (1 kHz)
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode) STEREO 0.7 % (1 kHz)
S/N : 98 dB (IHF–A weighted, DIRECT mode)
nnGeneral
nnVideo section Power supply (for U model) : AC 120 V, 60 Hz
• Standard video connectors Power supply (for N model) : AC 230 V, 50/60 Hz
Input/output level and impedance : 1 Vp-p, 75 Ω Power supply (for K model) : AC 220 V, 50 Hz
Frequency response : 5 Hz – 10 MHz — 0, –3 dB Power consumption :
• Color component video connector 220 W
Input/output level and impedance: Power consumption in standby mode :
Y (brightness) signal — 1 Vp-p, 75 Ω 0.2 W
PB / CB signal — 0.7 Vp-p, 75 Ω
Power consumption in CEC standby mode :
PR / CR signal — 0.7 Vp-p, 75 Ω
Frequency response : 5 Hz – 60 MHz — 0, –3 dB
0.5 W
Power comsumption in network standby mode :
2.7 W
DIMENSION 22.5
48.0
328.5
225.0
367.0
225.0
53.5
55.5
52.0
16.0
19.5 19.0
440.0
90.5
105.0
55.0
14.5
50.0 340.0 50.0
9
CAUTIONS IN SERVICING
Initializing AV Surround Receiver
AV Surround Receiver initialization should be performed when the μcom, peripheral parts of μcom, and Digital P.W.B.
were replaced.
1. Turn off the power pressing "ON/STANDBY (X)" button.

2. Press "ON/STANDBY (X)" button while simultaneously while pressing "INTERNET RADIO" and "ZONE2 SOURCE"
buttons.
3. Check that the entire display is flashing at intervals of about 1 second, and then release the 2 buttons.
The microprocessor will be initialized.
NOTE: • If step 3 fails, start over from step 1.

• All user settings will be lost and the factory setting will be recovered after the set is initialized.
So make sure to note down your setting beforehand for restoring after the initialization.
ON/STANDBY (X) INTERNET RADIO

ZONE2 SOURCE
Service Jig
When you repair the printing board, you can use the following JIG (Extension cable kit).
Please order it from Marantz Official Service Distributor in your region if necessary.
8U-110084S : EXTENSION UNIT KIT : 1 Set

(Refer to 55 page.)
When you update the firmware by DFW, you can use the following JIG (RS232C to internal connector conversion adapter
with 4P FFC cable kit ).
Please order it from Marantz Official Service Distributor in your region if necessary.
8U-210100S : WRITING KIT : 1 Set

(Refer to 58 page.)
10
DISASSEMBLY
• Disassemble in order of the arrow in the following figure.
• In the case of the re-assembling, assemble it in order of the reverse of the following flow.
• In the case of the re-assembling, observe "attention of assembling".
• If wire bundles are untied or moved to perform adjustment or replace parts etc., be sure to rearrange them neatly as
they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.
TOP COVER
FRONT PANEL ASSY PCB RC5_MX RADIATOR ASSY

Refer to "DISASSEMBLY Refer to "DISASSEMBLY Refer to "DISASSEMBLY
1. FRONT PANEL ASSY" 4. PCB RC5_MX" 2. RADIATOR ASSY"
and "EXPLODED VIEW" and "EXPLODED VIEW" and "EXPLODED VIEW"
PCB H/P PCB RC5_MX PCB 7CH_AMP ASSY
(Ref. No. of EXPLODED VIEW : 9) (Ref. No. of EXPLODED VIEW : 48) (Ref. No. of EXPLODED VIEW : 24)
PCB USB PCB GUIDE_L
(Ref. No. of EXPLODED VIEW : 51) (Ref. No. of EXPLODED VIEW : 18)
PCB HDMI PCB HDMI ASSY PCB GUIDE_R
(Ref. No. of EXPLODED VIEW : 12) Refer to "DISASSEMBLY (Ref. No. of EXPLODED VIEW : 19)
PCB FRONT 5. PCB HDMI ASSY" GUIDE CENTER FRONT PCB
(Ref. No. of EXPLODED VIEW : 14) and "EXPLODED VIEW" (Ref. No. of EXPLODED VIEW : 15)
PCB HDMI ASSY GUIDE CENTER PCB
(Ref. No. of EXPLODED VIEW : 47) (Ref. No. of EXPLODED VIEW : 16)
REG ASSY
Refer to "DISASSEMBLY
3. REG ASSY"
and "EXPLODED VIEW"
PCB REG
(Ref. No. of EXPLODED VIEW : 40)
PCB REG_CNT
PCB FFC_GUIDE
POWER TRANS MAIN AV ASSY PCB SMPS

Refer to "DISASSEMBLY Refer to "DISASSEMBLY Refer to "DISASSEMBLY
6. POWER TRANS MAIN" 7. AV ASSY" 8. PCB SMPS"
and "EXPLODED VIEW" and "EXPLODED VIEW" and "EXPLODED VIEW"
POWER TRANS MAIN PCB FRONT_CNT PCB SMPS
(Ref. No. of EXPLODED VIEW : 31) (Ref. No. of EXPLODED VIEW : 43) (Ref. No. of EXPLODED VIEW : 37)
PCB SIDE_CNT
PCB AUDIO_VIDEO ASSY
PCB SPK
Refer to "DISASSEMBLY
9. PCB SPK"
and "EXPLODED VIEW"
PCB SPK
11
About the photos used for "descriptions of the DISASSEMBLY" section
• The shooting direction of each photograph used herein is indicated on the left side of the respective photograph as
"Shooting direction: ***".
• Refer to the diagram below about the shooting direction of each photograph.
• Photographs with no shooting direction indicated were taken from the top of the set.
The viewpoint of each photograph

(Shooting direction)
Shooting direction: B
Front side
［View from the top］
Shooting direction: C Shooting direction: D
Shooting direction: A
1. FRONT PANEL ASSY

Proceeding : TOP COVER → FRONT PANEL ASSY
(1) Remove the screws.
View from the bottom
12
(2) Cut the wire clamp band, then disconnect the connector wire and FFC. Remove the screws.
CP4401
STYLE PIN:Loosen
STYLE PIN:Loosen STYLE PIN : Loosen
N3405
FFC
N2801
N3601 FFC
(3) Cut the wire clamp band, then remove the screws.
STYLE PIN : Loosen
Please refer to "EXPLODED VIEW" for the disassembly method of each PCB included in FRONT PANEL ASSY.
13
2. RADIATOR ASSY
Proceeding : TOP COVER → RADIATOR ASSY
STYLE PIN : Loosen
14
(3) Cut the wire clamp band, then disconnect the connector wire and FFC.
STYLE PIN:Loosen
cut
STYLE PIN:Loosen
N3405
FFC
N2801
N3601 FFC
(4) Disconnect the connector wires.
STYLE PIN : Loosen
CP401 CP402 CP403 CP405
Please refer to "EXPLODED VIEW" for the disassembly method of each PCB included in RADIATOR ASSY.
15
3. REG ASSY
Proceeding : TOP COVER → RADIATOR ASSY → REG ASSY
(1) Disconnect the connector wires, then remove the screws.
CP4602 CP4603 CP4615 CP4614
Please refer to "EXPLODED VIEW" for the disassembly method of each PCB included in REG ASSY.
16
4. PCB RC5_MX
Proceeding : TOP COVER → PCB RC5_MX
Shooting of photograph: A
(2) Disconnect the connector board.
Board to board
17
5. PCB HDMI ASSY
Proceeding : TOP COVER → PCB RC5_MX → PCB HDMI ASSY
(1) Disconnect the connector wires and FFC, then disconnect the connector board.
STYLE PIN : Loosen N3405 N3601
FFC N2801 FFC
Board to board
Board to board
18
6. POWER TRANS MAIN
Proceeding : TOP COVER → PCB RC5_MX → PCB HDMI ASSY
→ POWER TRANS MAIN
(1) Cut the wire clamp band, then disconnect the connector wires.
CP4001 CP4401
STYLE PIN : Loosen
CP4142
CLAMP WIRE (MTG) : Loosen
(2) Disconnect the connector wires.
CP4602 CP4603
19
(3) Cut the wire clamp band.
STYLE PIN : Loosen
Shooting direction: D
20
7. AV ASSY
Proceeding : TOP COVER → PCB RC5_MX → PCB HDMI ASSY → AV ASSY
(1) Cut the wire clamp band, then disconnect the connector wires. Remove the screws.
cut
CP4615
CP4614 CN4201
Please refer to "EXPLODED VIEW" for the disassembly method of each PCB included in AV ASSY.
8. PCB SMPS
Proceeding : TOP COVER → PCB RC5_MX → PCB HDMI ASSY → PCB SMPS
(1) Cut the wire clamp band, then remove the screws.
CP4142
cut
21
9. PCB SPK
Proceeding : TOP COVER → PCB RC5_MX → PCB HDMI ASSY → AV ASSY
→ PCB SMPS → PCB SPK
(2) Disconnect the connector wires, then remove the screws and HLDER.
Remove the screws, after remove

the RADIATOR ASSY.
CP402 CP1 CP403 CP405
STYLE PIN : Loosen
HOLDER
CP102, CP104 CLAMP WIRE (MTG) : Loosen
22
SPECIAL MODE
Special mode setting button
b No.1 - 6 : Press the "ON/STANDBY (X)" button to turn on the power while pressing both the button A and the button B at the
same time.
b No.7 - 9 : Press and hold both buttons A and B for over 3 second with the power turned on.
No. Mode Button A Button B Contents
Version display Firmware versions such as Main or DSP are displayed in the FL
1 DISPLAY STATUS
(μcom/DSP Error Display) Display. Errors are displayed when they occur. (Refer to 24 page)
User Initialization mode ZONE2 Backup data initialization is carried out.
2 M-DAX
(Installer Setup settings are not initialized.) SOURCE (Installer Setup settings are not initialized.)
Factory Initialization mode
INTERNET ZONE2 Backup data initialization is carried out.
3 (Installer Setup settings are also
RADIO SOURCE (Installer Setup settings are also initialized.)
initialized.)
Mode for switching tuner frequency step ZONE2
4 DISPLAY Change tuner frequency step to FM:50kHz / 200kHz
(U/N model only) SOURCE
Selects to reject operations through panel buttons and the master
5 PANEL/REMOTE LOCK Selection mode DISPLAY M-DAX volume knob on the main unit and operations via the remote
control.
ZONE2 Selects the “Diagnostic mode” or “Displaying the protection history
6 Service Related Selection mode STATUS
SOURCE mode”.
INTERNET ZONE2 Backup of DUAL BACKUP MEMORY is performed.
7 Memory Backup
RADIO SOURCE (Refer to 37 page)
INTERNET Recovery of DUAL BACKUP MEMORY is performed.
8 Memory Recovery DISPLAY
RADIO (Refer to 37 page)
INTERNET SOUND Backup of DUAL BACKUP MEMORY is cleared.
9 Memory Backup Clear
RADIO MODE (Refer to 37 page)
ZONE2 SOURCE DISPLAY STATUS
ON/STANDBY (X) M-DAX SOUND MODE

INTERNET RADIO
23
1. µcom/DSP Version display mode
1.1. Operation specifications
µcom/DSP version display mode:
When the set is started up in this mode, the version information is displayed.
Starting up:
Press the "ON/STANDBY (X)" button to turn on the power while pressing the "DISPLAY" and "STATUS" buttons.
Now, press the "STATUS" button to the display the 2nd item information on the FL Display.
b When the version is displayed on the FL Display, the version list is also displayed on the GUI.
1.2. Display Order

Error information(Refer to 1.3. Error display) → q Model destination information → w Firmware Package Version
→ e Main μ-com → r Main 1st Boot Loader → t DSP ROM → y Audio PLD → u GUI SFLASH
→ i Ethernet(DM860A) 1st Boot Loader, Hardware ID → o Ethernet(DM860A) 2nd Boot Loader, Rhapsody Flag
→ Q0 Ethernet(DM860A) IMAGE → Q1 Ethernet(DM860A)MAC ADDRESS information
q Model destination information :

Model FLD
NR1603 U model N R 1 6 0 3 U
NR1603 N model N R 1 6 0 3 N
NR1603 K model N R 1 6 0 3 K
w Firmware Package Version :

FLD P a c k a g e : * * * *
e Main µ-com :
FLD M a i n : * * * * * * * *
r Main 1st Boot Loader :

FLD M a i n F B L : * * . * *
t DSP ROM :
FLD D S P : * * . * *
y Audio PLD :
FLD A u d i o P L D : * * . * *
u GUI SFLASH :
Model FLD
NR1603 U model G U I : 1 3 2 1 * * * *
NR1603 N model G U I : 1 3 2 2 * * * *
NR1603 K model G U I : 1 3 2 5 * * * *
24
i Ethernet(DM860A) 1st Boot Loader, Hardware ID :
FLD E t h e r n e t F B L
Press the "STATUS" button.
FLD * * * * * * * * - b d
o Ethernet(DM860A) 2nd Boot Loader, Rhapsody Flag :

FLD E t h e r n e t S B L
FLD * * * * * * * * * * * * * - 0 A
Q0 Ethernet(DM860A) IMAGE :
FLD E t h e r n e t I M G
FLD * * * * * * * * * * * *
Q1 Ethernet(DM860A)MAC ADDRESS information :

FLD * E t h e r n e t M A C
FLD * * * * * * - * * * * * *
25
1.3. Error display
See the following table for each "Error information" display and its explanation (status).
Display order is q,w,e,r,t.
Condition Status FL Display Trouble shooting
• Please check the

Compared with the destination setting destination-resistors
q on the board. This is displayed when the (R773/R776, HDMI
Firm Check model name or destination information F I R M E R R O R B'D).
NG written into the firmware does not match. • Please write the
(b) firmware of correct
destination.
• Please check DIR
w
No response from DIR D I R E R R O R 0 1 （IC21, HDMI B'D) and
DIR NG
around circuits.
When DSP code boot is performed, the
DSP FLAG0 port does not change to "H" D S P E R R O R 0 1
even if DSP reset is executed.
Before DSP command is issued, the DSP
BUSY port does not change to "L".
D S P E R R O R 0 2
When DSP data read is performed,
executing WRITE="L" does not result in D S P E R R O R 0 3
ACK="H". • Please check DSP
e
When DSP data read is performed, （U8, HDMI B'D) and
DSP NG
executing REQ="L" does not result in D S P E R R O R 0 4 around circuits.
ACK="L".
When DSP data writing is performed,
executing WRITE="H" does not result in D S P E R R O R 0 5
ACK="H".
When DSP data writing is performed,
executing REQ="L" does not result in D S P E R R O R 0 6
ACK="L".
An error occurred in testing writing data • Please check IP
r between IP SCALER and DRR.
I P S C A L E R E R R 0 1
SCALER (U1601,
IP SCALER
Testing writing data between IP SCALER HDMI B'D) and around
NG I P S C A L E R E R R 0 2
and DRR resulted in no response. circuits.
t Error occurs in EEPROM checksum.(*** is

EEPROM NG a block address number.)
E 2 P R O M E R R * * *
Status FL Display
M a i n : * * * * * * * *
–
b
The written Firmware and product settings D S P : * * . * *
–
(model name, brand name, destination)

are compared. If Firmware that is not A u d i o P L D : * * . * *
–
designed for this product is written, ▲

or ▼ is displayed in the first column, as G U I : * * * * * * * *
–
shown on the right.

G U I : * * * * * * * *
•
26
1.4. Version display on the Setup Menu
Use the following procedure to display the firmware version.
(1) Press the “SETUP” button on the remote control.

(2) Select “General-Information-Firmware”.
A version with 20 digits is displayed as shown in the following image.
GUI Image
The displayed 20 digits are derived from each device version as shown below.
The 6th digit from the right for Main μcom
The 5th digit from the right for Main μcom
The 2nd digit from the right for Main μcom
The 1st digit from the right for Main μcom
The 2nd digit from the right for DSP The shaded part
is not used.
The 1st digit from the right for DSP
Mainμcom 0 0 9 8 0 0 7 3 Info display 1 4 9 0 - 0 1 3 7 - 0 0 0 0 - 1 4 1 0 - 8 9 6 2

DSP 7 1 1 0
The 4th digit from the right for SBL
A.PLD 1 6 0 6
The 3rd digit from the right for SBL
GUI 5 7 1 1 0 0 2 6
The 2nd digit from the right for SBL
DM860 FBL 0 9 0 3 1 1
DM860 SBL B 2 0 1 2 0 1 2 5 0 9 4 1 The 1st digit from the right for SBL
DM860 IMG I 2 0 1 2 0 4 0 1 0 1 4 1 The 1st digit from the right for IMG
The 2nd digit from the right for IMG
The 3rd digit from the right for IMG
The 4th digit from the right for IMG
The 1st digit from the right for GUI
The 2nd digit from the right for GUI
b This firmware version No. (xxxx-xxxx-xxxx-xxxx) is included in the service contact document.
These 20 digits are also included in the document.
27
2. PANEL/REMOTE LOCK Selection mode
2.1. Behavior specifications
In this mode, you can switch between the PANEL LOCK MODE and the Mode for preventing remote control acceptance.
2.2. Starting up
Press the "ON/STANDBY (X)" button to turn on power while pressing the "DISPLAY" and "M-DAX" buttons.
Press the "INTERNET RADIO" button to select the mode and the "STATUS" button to confirm the selection.
2.3. Mode selection method and how each mode is displayed

Each time you press the "INTERNET RADIO" button, the mode displayed on the FL DISPLAY changes.
While the desired mode name is displayed on the FL DISPLAY, press the "STATUS" button. The set is restarted and the
selected mode takes effect.
The currently set item is marked with " ＊ ".
q
FLD F P / V O L L O C K O n
Operations using the main unit panel buttons and the master
volume knob are rejected.
w
FLD F P L O C K O n
Operations using the main unit panel buttons are rejected.

e
FLD F P L O C K * O f f
Panel lock mode is cancelled.

r
FLD R C L O C K O n
Operations using the remote control are rejected.

t
FLD R C L O C K * O f f
RC lock mode is cancelled.

28
3. Service Related Selection mode
3.1. Behavior specifications
In this mode, you can switch between the Diagnostic mode (SERVICE CHECK) and the Displaying the protection mode
(PROTECTION).
3.2. Starting up
Press the "ON/STANDBY (X)" button to turn on power while pressing the "ZONE2 SOURCE" and "STATUS" buttons.
Press the "INTERNET RADIO" button to select the mode and press the "STATUS" button to restart the set and make the
setting take effect.
q
FLD 1 . S E R V I C E C H E C K
This mode is used for confirming the Video and Audio (signal)
paths. (Diagnostic mode)
The signal paths of the set can be easily confirmed after repair.
w (Refer to "3.4.DIAGNOSTIC MODE" 31 page.)
FLD 2 . P R O T E C T I O N
The protection history can be checked.
(Refer to "3.5.Errors checking mode" 35 page.)
3.3. Canceling diagnostic mode

Turn off the power by pressing the "ON/STANDBY (X)" button.
29
Personal notes:
30
3.4. DIAGNOSTIC MODE (Video/Audio (signal) path confirmation mode)
This mode is used for confirming the Video and Audio (signal) paths. (Troubleshooting)
Confirming the operation of unit can be easily done after repair.
Backup data will not be lost.
3.4.1. Operation
Use the remote control (RC014SR) that is supplied with the SRxx06 model. Press buttons on the remote control in the order indicated in the “Details of how to operate remote control” column in the following table to establish the confirmation path.
You will find using another remote control unit with the macro functions very useful. To use the macro functions, program a macro function to output a remote control code in accordance with the steps) in the table below.
3.4.2. Video system confirmation items

fig.XX : Refer to the block diagram of the fig.XXth.
Details of how to operate remote Output sequence of remote control codes
Confirmation item Setting and display Contents of confirmation Remarks
controller *a) ※ It is useful to form a macro program. *b)
Analog Video (signal) Path Video Convert (IP Scaler) : OFF 1.Press [AMP] qZONE2 POWER OFF ·Input : CVBS / Output : CVBS
All ZONE : ON 2.Press [Z2] ·Input : Component / Output : Component
Display: 3.Press [STANDBY] ·Input : USB (Picture) / Output : CVBS
4.Press [AMP] wKEY1/AUTO (Main Zone) (b As the input source, you can switch from DVD to other ones.)
1
V01 DVD 5.Press [1/AUTO] (Initialization & Video Convert All OFF)
6.Press [Z2] eZONE2 POWER ON
7.Press [POWER ON]
fig.1 8.Press [AMP] rDVD (Main Zone)
9.Press [DVD] twice
Analog or HDMI to HDMI (signal) Path Video Convert (IP Scaler) : ON 1.Press [AMP] qZONE2 POWER OFF ·Input : CVBS / Output : HDMI Confirm the input pass one by one.
IP Scaler : Analog&HDMI 2.Press [Z2] ·Input : Component / Output : HDMI Because it becomes only the input of the highest
Resolution : Auto 3.Press [STANDBY] ·Input : HDMI / Output : HDMI input becomes Convert/IP Scaler (signal) Path if it
2 Display: 4.Press [AMP] wKEY2/STEREO (Main Zone) ·Input : USB (Picture) / Output : HDMI inputs it at the same time.
5.Press [2/STEREO] (Initialization & Video Convert All OFF (b As the input source, you can switch from DVD to other ones.)
V02 DVD & IP Scaler "Analog & HDMI")
fig.2
6.Press [DVD] twice eDVD (Main Zone)
GUI FUNCTION Video Convert (IP Scaler) : ON 1.Press [AMP] qZONE2 POWER OFF ·GUI Display / Output : HDMI
IP Scaler : Analog&HDMI 2.Press [Z2] (b As the input source, you can switch from DVD to other ones.)
Resolution : Auto 3.Press [STANDBY]
Menu : ON 4.Press [AMP] wKEY2/STEREO (Main Zone)
All ZONE :ON 5.Press [2/STEREO] (Initialization & Video Convert All OFF
Display: & IP Scaler "Analog & HDMI")
3
V02 DVD 6.Press [Z2] eZONE2 POWER ON
7.Press [POWER ON]
8.Press [AMP] rDVD (Main Zone)
fig.3 9.Press [DVD] twice
10.Press [AMP MENU] tGUI MENU (Main Zone)
CEC FUNCTION HDMI Control : ON 1.Press [AMP] qZONE2 POWER OFF ·When the power supply of a TV is put in the standby mode, make sure
(Control Monitor : HDMI Monitor1) Display: 2.Press [Z2] that the power supply of this unit is also put in the standby mode.
3.Press [STANDBY] (b As the input source, you can switch from DVD to other ones.)
V03 DVD 4.Press [AMP] wKEY3/M-DAX (Main Zone)
4 5.Press [3/M-DAX] (Initialization & CEC Control ON &
Select Control Monitor 1)
fig.4 6.Press [DVD] twice eDVD (Main Zone)
HDMI Audio (signal) Path Audio : AMP(When checking the audio output 1.Press [AMP] qZONE2 POWER OFF ·Input : HDMI (Signal of PCM, DolbyDigital or DTS) / Output : Speakers
(Audio : AMP) from AMP) 2.Press [Z2] ·Input : HDMI (Signal of HD Audio) / Output : Speakers
Display: 3.Press [STANDBY] (b As the input source, you can switch from DVD to other ones.)
5 4.Press [AMP] wKEY5/HT-EQ (Main Zone)
V05 DVD 5.Press [5/HT-EQ] (Initialization & Select Audio AMP)
fig.5
HDMI Audio (signal) Path Audio : TV(When checking the audio output 1.Press [AMP] qZONE2 POWER OFF ·Input : HDMI (Signal of PCM, DolbyDigital or DTS) / Output : TV
(Audio : TV) from TV) 2.Press [Z2] (b As the input source, you can switch from DVD to other ones.)
Display: 3.Press [STANDBY]
6 4.Press [AMP] wKEY6/V.SEL (Main Zone)
V06 DVD 5.Press [6/V.SEL] (Initialization & Select Audio TV)
fig.6
31
3.4.3. Audio system confirmation items
fig.XX : Refer to the block diagram of the fig.XXth.
controller b It is useful to form a macro program.
Analog (signal) Path Input Mode : Fixed ANALOG 1.Press [AMP] qZONE2 POWER OFF ·Input : Analog / Output : Speakers (Front L/R)
SURROUND mode : DIRECT 2.Press [Z2] ·Input : Analog / Output : Pre OUT(Front L/R)
Amp assign : NORMAL 3.Press [STANDBY] (b As the input source, you can switch from DVD to other ones.)
Display: 4.Press [AMP] wKEY7/T.TONE (Main Zone)
1 5.Press [7/T.TONE] (Initialization & Amp assign NORMAL&
A01 DVD Input Mode Fixed ANALOG &
SURROUND mode DIRECT)
fig.7
DIGITAL (signal) Path Input Mode : Fixed DIGITAL 1.Press [AMP] qZONE2 POWER OFF ·Input : Digital / Output : Speakers (Front L/R)
(MAIN) Amp assign : NORMAL 2.Press [Z2] ·Input : Digital / Output : Pre OUT(Front L/R)
2 4.Press [AMP] wKEY8/CH LVL (Main Zone)
A02 DVD 5.Press [8/CH LVL] (Initialization & Amp assign NORMAL&
Input Mode Fixed DIGITAL)
fig.8
HDMI (signal) Path Input Mode : Fixed HDMI 1.Press [AMP] qZONE2 POWER OFF ·Input : HDMI / Output : Speakers (Front L/R)
Amp assign : NORMAL 2.Press [Z2] ·Input : HDMI / Output : Pre OUT(Front L/R), SW(20Hz)
3 4.Press [AMP] wSURROUND
A05 DVD 5.Press [SURROUND] (Initialization & Amp assign NORMAL &
Input Mode Fixed HDMI)
fig.9
A/D (signal) Path Amp assign : NORMAL 1.Press [AMP] qZONE2 POWER OFF ·Input : Analog / Output : Speakers (Front L/R)
(Main Zone) SURROUND mode : Multi ch STEREO 2.Press [Z2] ·Input : Analog / Output : Pre OUT(Front L/R), SW(20Hz)
Vol -20dB 3.Press [STANDBY] (b As the input source, you can switch from DVD to other ones.)
Speaker Config : SSSSY 4.Press [AMP] wPURE DIRECT
(Front/Center/Surround/SourroundBack : 5.Press [PURE DIRECT] (Initialization & Amp assign ZONE2 &
4 Small, SW : Yes) SURROUND mode : Multi ch STEREO &
Display: ZONE2 Volume -20dB)
A06 DVD 6.Press [DVD] twice eDVD (Main Zone)
fig.10
Analog Audio (signal) Path Amp assign : ZONE2 1.Press [AMP] qZONE2 POWER OFF ·Input : Analog / Output : Speakers (SURR BACK L/R)
(ZONE2) ZONE2 Function : Source 2.Press [Z2] ·Input : Analog / Output : Pre OUT(ZONE2 L/R)
Zone2 Vol -20dB 3.Press [STANDBY] (b As the input source, you can switch from DVD to other ones.)
Display: 4.Press [AMP] wP2
5.Press [P2] (Initialization & Amp assign ZONE2 &
5
V07 DVD SURROUND mode : Multi ch STEREO &
ZONE2 Volume -20dB)
6.Press [Z2] eZONE2 POWER ON
7.Press [POWER ON]
fig.11 8.Press [AMP] rDVD (Main Zone)
9.Press [DVD] twice
Amp Assign (signal) Path Amp assign : BiAMP 1.Press [AMP] qZONE2 POWER OFF ·Input : Analog / Output : Speakers (SURR BACK L/R)
(Amp Assign : SPKR-C) SURROUND mode : Multi ch STEREO 2.Press [Z2] (b As the input source, you can switch from DVD to other ones.)
Vol -20dB 3.Press [STANDBY]
Display: 4.Press [AMP], Select "MAIN" wDISPLAY
6 5.Press [DISPLAY] (Initialization & Amp assign SPKR-C &
A11 DVD SURROUND mode : Multi ch STEREO &
Volume -20dB)
fig.12
Amp Assign (signal) Path Amp assign : Front-B 1.Press [AMP] qZONE2 POWER OFF ·Input : Analog / Output : Speakers (SURR BACK L/R)
(Amp Assign Front-B) SURROUND mode : Multi ch STEREO 2.Press [Z2] (b As the input source, you can switch from DVD to other ones.)
Vol -20dB 3.Press [STANDBY]
Display: 4.Press [AMP] wSHIFT/TOP MENU
7
5.Press [SHIFT/TOP MENU] (Initialization & Amp assign Front-B &
A12 DVD SURROUND mode : Multi ch STEREO &
fig.13 Volume -20dB)
32
controller b It is useful to form a macro program.
Amp Assign (signal) Path Amp assign : Front Height 1.Press [AMP] qZONE2 POWER OFF ·Input : Analog / Output : Speakers (SURR BACK L/R)
(Amp Assign : Front Height) SURROUND mode : Multi ch STEREO 2.Press [Z2] ·Input : Analog / Output : Pre OUT(SB L/R)
Vol -20dB 3.Press [STANDBY] (b As the input source, you can switch from DVD to other ones.)
Surround Parameter-Speaker : F.Height 4.Press [AMP] w+10/SLEEP (Main Zone)
8 Display: 5.Press [+10/SLEEP] (Initialization & Amp assign Front Height &
SURROUND mode : Multi ch STEREO &
A14 DVD Volume -20dB)
fig.14
33
Personal notes: Personal notes:
34
3.5. Errors checking mode (Displaying the protection history)
3.5.1. Operation specifications
Error mode (Displaying the protection history):
When the set is started up in this mode, the error information is displayed.
3.5.2. About the display on the FL display

When the "STATUS" button is pressed after the error (protection history display) mode is set, a history like the one shown
below is displayed, depending on the conditions.
(1) Normal (when there has been no protection incident)
FLD N O P R O T E C T
(2) For ASO (when the last protection incident was ASO protection)
FLD P R T : A S O
Cause: The line between speaker terminals is shorted, or speakers with impedance of less than the rated value.
Supplementary information: As the excess current is detected after operation of the speaker relay, a short on the
speaker terminal and the connected speaker can be identified.
If the power is turned on without correcting the abnormality, the protection function will work about 5 seconds later
and the power supply will be shut off.
(3) For DC (when the last protection incident was DC protection)

FLD P R T : D C
Cause: DC output of the power amplifier is abnormal.
(4) For THERMAL (when the last protection incident was THERMAL(A) or THERMAL(B) protection)
FLD P R T : T H E R M A L A
FLD P R T : T H E R M A L B
Cause: The temperature of the heat sink is excessive.
b Additional causes of protection can be due to loose connections, associated components, Microprocessor, etc.
When the "STATUS" button is pressed again after the protection history as shown above is displayed, the normal display
reappears.
35
3.5.3. Clearing the protection history
There are two ways to clear the protection history, as described below.
(1) Start up the set in error (protection display) mode and display the error, then press and hold down the "DISPLAY"
button for 3 seconds.
FLD P R T : D C
Press and hold down "DISPLAY" button for 3 seconds.
FLD P R T : C L E A R
The above is displayed and the protection history is cleared.
FLD N O P R O T E C T
(2) Initialize. (Refer to "Initializing AV Surround Receiver" 10 page.)
b If you want to save a backup, perform the method in 2.3.(1).
Warning indication by the POWER LED

If the power is turned off when a protection incident has been detected, the POWER LED (red) flashes as a warning
according to the conditions in which the protection incident occurred.
(1) ASO/DC PROTECTION : Flashes at intervals of 0.5 seconds (0.25 seconds lit, 0.25 seconds off)
(2) THERMAL (A/B) PROTECTION : Flashes at intervals of 2 seconds (1 second lit, 1 second off)
36
4. DUAL BACKUP MEMORY
This product has a Dual Backup Memory function. The conventional Backup functions to memorize, in the EEPROM
(U3003) in the circuit, a current setting of the moment the main power is turned off so that it can be restored when it
is turned ON again. Meanwhile, the DUAL BACKUP MEMORY is capable of memorizing any arbitrary setting that is
configured while the product is in operation so as to restore it at any time. When servicing units returned from end-users
for repairs, use this function to back up the current setting (e.g. Tuner Preset). This will enable the units to be returned to
the users after repairs, with the setting unchanged.
NOTE: If end-users use this function, the data will be overwritten.
The contents of the memory do not disappear even if you initialize this unit.
If you want to erase, please refer to 3.2. SERVICE PRECAUTIONS.
4.1. HOW TO OPERATE

-Backup-
(1) Configure a setting you would like to save in the MEMORY and hold down the "INTERNET RADIO" and "ZONE2
SOURCE" buttons on the Front Panel at the same time for 3 seconds or more.
(2) The FL Display indicates "MEMORY SAVING" while the Recovery is being performed.
FLD M E M O R Y S A V I N G
(3) The FL Display indicates "COMPLETE" when the Backup is completed.
FLD C O M P L E T E
-Recovery-
(1) Hold down the "INTERNET RADIO" and "DISPLAY" buttons at the same time for 3 seconds or more.
(2) The FL Display indicates "MEMORY LOAD" while the Backup is being performed.
FLD M E M O R Y L O A D
(3) After the FL Display indicates "COMPLETE", the product goes into Standby mode. When the power is restored, the
Recovery is completed.
FLD C O M P L E T E
The FL Display indicates "NO BACKUP" if the DUAL BACKUP MEMORY has not been activated with no data to be
recovered saved in the Memory.
FLD N O B A C K U P
4.2. SERVICE PRECAUTIONS

When the Flash Rom (U3003) on the HDMI PWB is replaced make sure, in order to maintain consistency with the
Backup Memory, to clear the DUAL BACKUP MEMORY in thefollowing way :
-How to clear the Backup Memory-

(1) Hold down the "INTERNET RADIO" and "SOUND MODE" buttons at the same time for 3 seconds or more.
(2) The FL Display indicates "BACKUP CLEAR" while the memory is being cleared.
FLD B A C K U P C L E A R
(3) After the FL Display indicates "COMPLETE", the operation is completed.
FLD C O M P L E T E
37
Personal notes:
38
BLOCK DIAGRAM
fig.1
VIDEO DIAGRAM
TMDS IN
OUT1
TMDS IN ADV7623
HDMI TRANSCEIVER
TMDS IN
OSD
NR1403 ONLY
SPI FLASH
HDMI1
HDMI2 TMDS IN
OSD
TMDS SW
HDMI3 ADV3002
HDMI OUT
36-BIT YCbCr/RGB TMDS OUTPUT
OUT1
HDMI IN HDMI4 HDMI Rx ADV8002-4
VIDEO DECODER HDMI TRANSCEIVER
TMDS IN ADV7850
HDMI5
FRONT HDMI ADV8195 TMDS IN
BUFFER
DDRII DDRII
NR1603 ONLY
NJM2586M
COMP1-Y COMP1-Y 6dB 75 2V 75
Y
COMP1-Cb
IN1 Cb
COMP1-Cr
COMP2-Y
Cr COMP1-Cb 6dB 75 75
-6dB
COMPONENT IN COMP2-Cb
COMP1-Cr 6dB 75 75
Y COMP2-Y
COMP2-Cr
IN2 Cb COMP2-Cb
Cr COMP2-Cr 75
Y
COMPONENT
-6dB 75
Cb
NR1603 ONLY
75
Cr OUT
NR1603 ONLY
USBD+/- 8-BIT SAA7121H

NET_Y INPUT SELECT
USB DM860 (ENCODER)
NET_C
TC4051 75
NET_CVBS
6dB
IN1 -6dB
75 CVBS
MONITOR OUT
CVBS IN IN2
-6dB
IN3 -6dB
39
fig.2
VIDEO DIAGRAM
TMDS IN
OUT1
TMDS IN ADV7623
HDMI TRANSCEIVER
TMDS IN
OSD
NR1403 ONLY
SPI FLASH
HDMI1
HDMI2 TMDS IN
OSD
TMDS SW
HDMI3 ADV3002
HDMI OUT
OUT1
TMDS IN ADV7850
HDMI5
BUFFER
DDRII DDRII
NR1603 ONLY
NJM2586M
Y
COMP1-Cb
IN1 Cb
COMP1-Cr
COMP2-Y
-6dB
COMP1-Cr 6dB 75 75
Y COMP2-Y
COMP2-Cr
IN2 Cb COMP2-Cb
Cr COMP2-Cr 75
Y
COMPONENT
-6dB 75
Cb
NR1603 ONLY
75
Cr OUT
NR1603 ONLY

NET_Y INPUT SELECT
USB DM860 (ENCODER)
NET_C
TC4051 75
NET_CVBS
6dB
IN1 -6dB
75 CVBS
MONITOR OUT
CVBS IN IN2
-6dB
IN3 -6dB
40
fig.3
VIDEO DIAGRAM
TMDS IN
OUT1
TMDS IN ADV7623
HDMI TRANSCEIVER
TMDS IN
OSD
NR1403 ONLY
SPI FLASH
HDMI1
HDMI2 TMDS IN
OSD
TMDS SW
HDMI3 ADV3002
HDMI OUT
OUT1
TMDS IN ADV7850
HDMI5
BUFFER
DDRII DDRII
NR1603 ONLY
NJM2586M
Y
COMP1-Cb
IN1 Cb
COMP1-Cr
COMP2-Y
-6dB
COMP1-Cr 6dB 75 75
Y COMP2-Y
COMP2-Cr
IN2 Cb COMP2-Cb
Cr COMP2-Cr 75
Y
COMPONENT
-6dB 75
Cb
NR1603 ONLY
75
Cr OUT
NR1603 ONLY

NET_Y INPUT SELECT
USB DM860 (ENCODER)
NET_C
TC4051 75
NET_CVBS
6dB
IN1 -6dB
75 CVBS
MONITOR OUT
CVBS IN IN2
-6dB
IN3 -6dB
41
fig.4
VIDEO DIAGRAM
TMDS IN
OUT1
TMDS IN ADV7623
HDMI TRANSCEIVER
TMDS IN
OSD
NR1403 ONLY
SPI FLASH
HDMI1
HDMI2 TMDS IN
OSD
TMDS SW
HDMI3 ADV3002 36-BIT YCbCr/RGB TMDS OUTPUT
OUT1 HDMI OUT
VIDEO DECODER u COM
HDMI TRANSCEIVER
TMDS IN ADV7850
HDMI5
BUFFER
DDRII DDRII
NR1603 ONLY
NJM2586M
Y
COMP1-Cb
IN1 Cb
COMP1-Cr
COMP2-Y
-6dB
COMP1-Cr 6dB 75 75
Y COMP2-Y
COMP2-Cr
IN2 Cb COMP2-Cb
Cr COMP2-Cr 75
Y
-6dB 75
Cb COMPONENT
NR1603 ONLY
75
Cr OUT
NR1603 ONLY

NET_Y INPUT SELECT
USB DM860 (ENCODER)
NET_C
TC4051 75
NET_CVBS
6dB
IN1 -6dB
75 CVBS
MONITOR OUT
CVBS IN IN2
-6dB
IN3 -6dB
42
fig.5
NR1603 ONLY 27MHz
NR1603 ONLY AUDIO DIAGRAM
HDMI RECEIVER
HDMI1 ADV7850 4
27MHz
ADV8002-4
HDMI2 HDMI I2S HDMI TRANSCEIVER
SWITCHER 4 I2C/SPDIF
HDMI3 ADV3002 S/PDIF HDMI OUT
OUTPUT MUX
HDMI IN HDMI4 DSD
HBR
HDMI5
MCLK
ADV8195
FRONT TMDS SCLK
HDMI BUFFER
28.6363MHz
ADV 7623
HDMI TRANCEIVER
HDMI RECEIVER AUDIO 21.875M (NR1603)

PROCESSOR PROCESSOR 18.75M (NR1403)
NR1403 ONLY
DIN_FLFR
RXSPDIF
RXMCLK
RXFS
I2S
RX64FS
DIR_AUDIO_VO DIN_CSW
RX_SPDIF TX_SPDIF DIR_RERR DIN_SLSR ADSP21487
MCLK DIN_SBLSBR FLASH KEY_MATRIX
SLRCK EPM3032ATC4410 DIGITAL AUDIO 12MHz
SBCK
DIR_DATA DECODER
DIGITAL IN 74VHCU04 LC89058W-E DIR_FS AUDIO PLD
DIR_64FS
COAXIAL DIR_256FS DSPIN_64FS
DEMO_ DSPIN_FS
INPUT DULATION DATA SDRAM
SELECTOR & SELECTOR DSPOUT_64FS MAIN
LOCK DSPOUT_FS DATA MICOM
DETECT FUNCTION
OPTICAL RX610 2M
COAX / OPT IN ASDATA
DIR_256FS
DIR_64FS
NR14/1603 : 1 / 1
DIR_FS
24.576MHz DSP AUDIO CONT.
74LVC157.
DIR CONT.
PLD CONT
HDMI
CEC
HPD
FLASH
OSD DATA
AK5358 TUNER CONT
NETWORK POWER CONT
A/D CONVERTER
DAC_256FS
DAC_64FS
DAC_FS
SBL/SBR
SL/SR
FL/FR
CONTROLLER
C/SW
ETHERNET
ETHERNET
MUTE
PHY DM860A RELAY
SDRAM SDRAM
LAN8720 FL CONT
SERIAL I/O
Interface ATT
H/P-L
I2S
MAIN ZONE DAC
AK4358VQ H/P-R
HEADPHONE OUT
USB FRONT Decimation Decimation
FILTER FILTER FL
FL
FL
DAC PCM5100
Modulator Modulator FR
FR
DA-SBR
DA-SBL
DA-SW
DA-SR
DA-SL
DA-FR
DA-FL
FR
DA-C
NR1603 ONLY C
C
C
SL SL
SL SPK OUT
ANA_FL Bypass
DSP_FL Tone
ANALOG TONE SR
FL
Tone+Mix SR
SR
INPUT ANA_FR Tone+Mix

PRE-FL
SBL SBL
DSP_FR Tone SBL(FL-B/FL-H/BI-AMP/ZONE)
TONE FR
Bypass
PRE-FR SBR SBR

SBR(FR-B/FR-H/BI-AMP/ZONE)
NR1603 ONLY
DSP_C
C
NR1603 : FM ONLY
NR1403 : FM/AM
TUNER
DSP_SW
SW1 0.1ch PREOUT
R2A15218FP
MIC(Mini Jack) INPUT SELECT & VOLUME DSP_SL
SL
M-Xport PRE-FL FL
DSP_SR
SR
PRE-FR FR 2ch PREOUT
NR14/1603 2.1ch
DSP_SBL
SBL
ZONE_L
TO MICOM
DSP_SBR SW / FL+FR MUTE

SBR
ZONE_R
BI_AMP NR1603 ONLY
ZONE2-> SB ASSIGN NR1603 ONLY
43
fig.6
NR1603 ONLY 27MHz
HDMI RECEIVER
HDMI1 ADV7850 4
27MHz
ADV8002-4
OUTPUT MUX
HDMI IN HDMI4 DSD
HBR
HDMI5
MCLK
ADV8195
FRONT TMDS SCLK
HDMI BUFFER
28.6363MHz
ADV 7623
HDMI TRANCEIVER

NR1403 ONLY
DIN_FLFR
RXSPDIF
RXMCLK
RXFS
I2S
RX64FS
SBCK
DIR_DATA DECODER
DIR_64FS
DEMO_ DSPIN_FS
DETECT FUNCTION
OPTICAL RX610 2M
DIR_256FS
DIR_64FS
NR14/1603 : 1 / 1
DIR_FS
74LVC157.
DIR CONT.
PLD CONT
HDMI
CEC
HPD
FLASH
OSD DATA
AK5358 TUNER CONT
NETWORK POWER CONT
A/D CONVERTER
DAC_256FS
DAC_64FS
DAC_FS
SBL/SBR
SL/SR
FL/FR
CONTROLLER
C/SW
ETHERNET
ETHERNET
MUTE
PHY DM860A RELAY
SDRAM SDRAM
LAN8720 FL CONT
SERIAL I/O
Interface ATT
H/P-L
I2S
MAIN ZONE DAC
AK4358VQ H/P-R
HEADPHONE OUT
FILTER FILTER FL
FL
FL
DAC PCM5100
FR
DA-SBR
DA-SBL
DA-SW
DA-SR
DA-SL
DA-FR
DA-FL FR
DA-C
NR1603 ONLY C
C
C
SL SL
SL SPK OUT
ANA_FL Bypass
DSP_FL Tone
ANALOG TONE SR
FL
Tone+Mix SR
SR

PRE-FL
SBL SBL
TONE FR
Bypass
PRE-FR SBR SBR

NR1603 ONLY
DSP_C
C
NR1603 : FM ONLY
NR1403 : FM/AM
TUNER
DSP_SW
SW1 0.1ch PREOUT
R2A15218FP
SL
M-Xport PRE-FL FL
DSP_SR
SR
NR14/1603 2.1ch
DSP_SBL
SBL
ZONE_L
TO MICOM

SBR
ZONE_R
BI_AMP NR1603 ONLY
44
fig.7
NR1603 ONLY 27MHz
HDMI RECEIVER
HDMI1 ADV7850 4
27MHz
ADV8002-4
OUTPUT MUX
HDMI IN HDMI4 DSD
HBR
HDMI5
MCLK
ADV8195
FRONT TMDS SCLK
HDMI BUFFER
28.6363MHz
ADV 7623
HDMI TRANCEIVER

NR1403 ONLY
DIN_FLFR
RXSPDIF
RXMCLK
RXFS
I2S
RX64FS
SBCK
DIR_DATA DECODER
DIR_64FS
DEMO_ DSPIN_FS
DETECT FUNCTION
OPTICAL RX610 2M
DIR_256FS
DIR_64FS
NR14/1603 : 1 / 1
DIR_FS
74LVC157.
DIR CONT.
PLD CONT
HDMI
CEC
HPD
FLASH
OSD DATA
AK5358 TUNER CONT
NETWORK POWER CONT
A/D CONVERTER
DAC_256FS
DAC_64FS
DAC_FS
SBL/SBR
SL/SR
FL/FR
CONTROLLER
C/SW
ETHERNET
ETHERNET
MUTE
PHY DM860A RELAY
SDRAM SDRAM
LAN8720 FL CONT
SERIAL I/O
Interface ATT
H/P-L
I2S
MAIN ZONE DAC
AK4358VQ H/P-R
HEADPHONE OUT
FILTER FILTER FL
FL
FL
DAC PCM5100
FR
DA-SBR
DA-SBL
DA-SW
DA-SR
DA-SL
DA-FR
DA-FL
FR
DA-C
NR1603 ONLY C
C
C
SL SL
SL SPK OUT
ANA_FL Bypass
DSP_FL Tone
ANALOG TONE SR
FL
Tone+Mix SR
SR

PRE-FL
SBL SBL
TONE FR
Bypass
PRE-FR SBR SBR

NR1603 ONLY
DSP_C
C
NR1603 : FM ONLY
NR1403 : FM/AM
TUNER
DSP_SW
SW1 0.1ch PREOUT
R2A15218FP
SL
M-Xport PRE-FL FL
DSP_SR
SR
NR14/1603 2.1ch
DSP_SBL
SBL
ZONE_L
TO MICOM

SBR
ZONE_R
BI_AMP NR1603 ONLY
45
fig.8
NR1603 ONLY 27MHz
HDMI RECEIVER
HDMI1 ADV7850 4
27MHz
ADV8002-4
OUTPUT MUX
HDMI IN HDMI4 DSD
HBR
HDMI5
MCLK
ADV8195
FRONT TMDS SCLK
HDMI BUFFER
28.6363MHz
ADV 7623
HDMI TRANCEIVER

NR1403 ONLY
DIN_FLFR
RXSPDIF
RXMCLK
RXFS
I2S
RX64FS
SBCK
DIR_DATA DECODER
DIR_64FS
DEMO_ DSPIN_FS
DETECT FUNCTION
OPTICAL RX610 2M
DIR_256FS
DIR_64FS
NR14/1603 : 1 / 1
DIR_FS
74LVC157.
DIR CONT.
PLD CONT
HDMI
CEC
HPD
FLASH
OSD DATA
AK5358 TUNER CONT
NETWORK POWER CONT
A/D CONVERTER
DAC_256FS
DAC_64FS
DAC_FS
SBL/SBR
SL/SR
FL/FR
CONTROLLER
C/SW
ETHERNET
ETHERNET
MUTE
PHY DM860A RELAY
SDRAM SDRAM
LAN8720 FL CONT
SERIAL I/O
Interface ATT
H/P-L
I2S
MAIN ZONE DAC
AK4358VQ H/P-R
HEADPHONE OUT
FILTER FILTER FL
FL
FL
DAC PCM5100
FR
DA-SBR
DA-SBL
DA-SW
DA-SR
DA-SL
DA-FR
DA-FL FR
DA-C
NR1603 ONLY C
C
C
SL SL
SL SPK OUT
ANA_FL Bypass
DSP_FL Tone
ANALOG TONE SR
FL
Tone+Mix SR
SR

PRE-FL
SBL SBL
TONE FR
Bypass
PRE-FR SBR SBR

NR1603 ONLY
DSP_C
C
NR1603 : FM ONLY
NR1403 : FM/AM
TUNER
DSP_SW
SW1 0.1ch PREOUT
R2A15218FP
SL
M-Xport PRE-FL FL
DSP_SR
SR
NR14/1603 2.1ch
DSP_SBL
SBL
ZONE_L
TO MICOM

SBR
ZONE_R
BI_AMP NR1603 ONLY
46
fig.9
NR1603 ONLY 27MHz
HDMI RECEIVER
HDMI1 ADV7850 4
27MHz
ADV8002-4
OUTPUT MUX
HDMI IN HDMI4 DSD
HBR
HDMI5
MCLK
ADV8195
FRONT TMDS SCLK
HDMI BUFFER
28.6363MHz
ADV 7623
HDMI TRANCEIVER

NR1403 ONLY
DIN_FLFR
RXSPDIF
RXMCLK
RXFS
I2S
RX64FS
SBCK
DIR_DATA DECODER
DIR_64FS
DEMO_ DSPIN_FS
DETECT FUNCTION
OPTICAL RX610 2M
DIR_256FS
DIR_64FS
NR14/1603 : 1 / 1
DIR_FS
74LVC157.
DIR CONT.
PLD CONT
HDMI
CEC
HPD
FLASH
OSD DATA
AK5358 TUNER CONT
NETWORK POWER CONT
A/D CONVERTER
DAC_256FS
DAC_64FS
DAC_FS
SBL/SBR
SL/SR
FL/FR
CONTROLLER
C/SW
ETHERNET
ETHERNET
MUTE
PHY DM860A RELAY
SDRAM SDRAM
LAN8720 FL CONT
SERIAL I/O
Interface ATT
H/P-L
I2S
MAIN ZONE DAC
AK4358VQ H/P-R
HEADPHONE OUT
FILTER FILTER FL
FL
FL
DAC PCM5100
FR
DA-SBR
DA-SBL
DA-SW
DA-SR
DA-SL
DA-FR
DA-FL
FR
DA-C
NR1603 ONLY C
C
C
SL SL
SL SPK OUT
ANA_FL Bypass
DSP_FL Tone
ANALOG TONE SR
FL
Tone+Mix SR
SR

PRE-FL
SBL SBL
TONE FR
Bypass
PRE-FR SBR SBR

NR1603 ONLY
DSP_C
C
NR1603 : FM ONLY
NR1403 : FM/AM
TUNER
DSP_SW
SW1 0.1ch PREOUT
R2A15218FP
SL
M-Xport PRE-FL FL
DSP_SR
SR
NR14/1603 2.1ch
DSP_SBL
SBL
ZONE_L
TO MICOM

SBR
ZONE_R
BI_AMP NR1603 ONLY
47
fig.10
NR1603 ONLY 27MHz
HDMI RECEIVER
HDMI1 ADV7850 4
27MHz
ADV8002-4
OUTPUT MUX
HDMI IN HDMI4 DSD
HBR
HDMI5
MCLK
ADV8195
FRONT TMDS SCLK
HDMI BUFFER
28.6363MHz
ADV 7623
HDMI TRANCEIVER

NR1403 ONLY
DIN_FLFR
RXSPDIF
RXMCLK
RXFS
I2S
RX64FS
SBCK
DIR_DATA DECODER
DIR_64FS
DEMO_ DSPIN_FS
DETECT FUNCTION
OPTICAL RX610 2M
DIR_256FS
DIR_64FS
NR14/1603 : 1 / 1
DIR_FS
74LVC157.
DIR CONT.
PLD CONT
HDMI
CEC
HPD
FLASH
OSD DATA
AK5358 TUNER CONT
NETWORK POWER CONT
A/D CONVERTER
DAC_256FS
DAC_64FS
DAC_FS
SBL/SBR
SL/SR
FL/FR
CONTROLLER
C/SW
ETHERNET
ETHERNET
MUTE
PHY DM860A RELAY
SDRAM SDRAM
LAN8720 FL CONT
SERIAL I/O
Interface ATT
H/P-L
I2S
MAIN ZONE DAC
AK4358VQ H/P-R
HEADPHONE OUT
FILTER FILTER FL
FL
FL
DAC PCM5100
FR
DA-SBR
DA-SBL
DA-SW
DA-SR
DA-SL
DA-FR
DA-FL FR
DA-C
NR1603 ONLY C
C
C
SL SL
SL SPK OUT
ANA_FL Bypass
DSP_FL Tone
ANALOG TONE SR
FL
Tone+Mix SR
SR

PRE-FL
SBL SBL
TONE FR
Bypass
PRE-FR SBR SBR

NR1603 ONLY
DSP_C
C
NR1603 : FM ONLY
NR1403 : FM/AM
TUNER
DSP_SW
SW1 0.1ch PREOUT
R2A15218FP
SL
M-Xport PRE-FL FL
DSP_SR
SR
NR14/1603 2.1ch
DSP_SBL
SBL
ZONE_L
TO MICOM

SBR
ZONE_R
BI_AMP NR1603 ONLY
48
fig.11
NR1603 ONLY 27MHz
HDMI RECEIVER
HDMI1 ADV7850 4
27MHz
ADV8002-4
OUTPUT MUX
HDMI IN HDMI4 DSD
HBR
HDMI5
MCLK
ADV8195
FRONT TMDS SCLK
HDMI BUFFER
28.6363MHz
ADV 7623
HDMI TRANCEIVER

NR1403 ONLY
DIN_FLFR
RXSPDIF
RXMCLK
RXFS
I2S
RX64FS
SBCK
DIR_DATA DECODER
DIR_64FS
DEMO_ DSPIN_FS
DETECT FUNCTION
OPTICAL RX610 2M
DIR_256FS
DIR_64FS
NR14/1603 : 1 / 1
DIR_FS
74LVC157.
DIR CONT.
PLD CONT
HDMI
CEC
HPD
FLASH
OSD DATA
AK5358 TUNER CONT
NETWORK POWER CONT
A/D CONVERTER
DAC_256FS
DAC_64FS
DAC_FS
SBL/SBR
SL/SR
FL/FR
CONTROLLER
C/SW
ETHERNET
ETHERNET
MUTE
PHY DM860A RELAY
SDRAM SDRAM
LAN8720 FL CONT
SERIAL I/O
Interface ATT
H/P-L
I2S
MAIN ZONE DAC
AK4358VQ H/P-R
HEADPHONE OUT
FILTER FILTER FL
FL
FL
DAC PCM5100
FR
DA-SBR
DA-SBL
DA-SW
DA-SR
DA-SL
DA-FR
DA-FL
FR
DA-C
NR1603 ONLY C
C
C
SL SL
SL SPK OUT
ANA_FL Bypass
DSP_FL Tone
ANALOG TONE SR
FL
Tone+Mix SR
SR

PRE-FL
SBL SBL
TONE FR
Bypass
PRE-FR SBR SBR

NR1603 ONLY
DSP_C
C
NR1603 : FM ONLY
NR1403 : FM/AM
TUNER
DSP_SW
SW1 0.1ch PREOUT
R2A15218FP
SL
M-Xport PRE-FL FL
DSP_SR
SR
NR14/1603 2.1ch
DSP_SBL
SBL
ZONE_L
TO MICOM

SBR
ZONE_R
BI_AMP NR1603 ONLY
49
fig.12
NR1603 ONLY 27MHz
HDMI RECEIVER
HDMI1 ADV7850 4
27MHz
ADV8002-4
OUTPUT MUX
HDMI IN HDMI4 DSD
HBR
HDMI5
MCLK
ADV8195
FRONT TMDS SCLK
HDMI BUFFER
28.6363MHz
ADV 7623
HDMI TRANCEIVER

NR1403 ONLY
DIN_FLFR
RXSPDIF
RXMCLK
RXFS
I2S
RX64FS
SBCK
DIR_DATA DECODER
DIR_64FS
DEMO_ DSPIN_FS
DETECT FUNCTION
OPTICAL RX610 2M
DIR_256FS
DIR_64FS
NR14/1603 : 1 / 1
DIR_FS
74LVC157.
DIR CONT.
PLD CONT
HDMI
CEC
HPD
FLASH
OSD DATA
AK5358 TUNER CONT
NETWORK POWER CONT
A/D CONVERTER
DAC_256FS
DAC_64FS
DAC_FS
SBL/SBR
SL/SR
FL/FR
CONTROLLER
C/SW
ETHERNET
ETHERNET
MUTE
PHY DM860A RELAY
SDRAM SDRAM
LAN8720 FL CONT
SERIAL I/O
Interface ATT
H/P-L
I2S
MAIN ZONE DAC
AK4358VQ H/P-R
HEADPHONE OUT
FILTER FILTER FL
FL
FL
DAC PCM5100
FR
DA-SBR
DA-SBL
DA-SW
DA-SR
DA-SL
DA-FR
DA-FL FR
DA-C
NR1603 ONLY C
C
C
SL SL
SL SPK OUT
ANA_FL Bypass
DSP_FL Tone
ANALOG TONE SR
FL
Tone+Mix SR
SR

PRE-FL
SBL SBL
TONE FR
Bypass
PRE-FR SBR SBR

NR1603 ONLY
DSP_C
C
NR1603 : FM ONLY
NR1403 : FM/AM
TUNER
DSP_SW
SW1 0.1ch PREOUT
R2A15218FP
SL
M-Xport PRE-FL FL
DSP_SR
SR
NR14/1603 2.1ch
DSP_SBL
SBL
ZONE_L
TO MICOM

SBR
ZONE_R
BI_AMP NR1603 ONLY
50
fig.13
NR1603 ONLY 27MHz
HDMI RECEIVER
HDMI1 ADV7850 4
27MHz
ADV8002-4
OUTPUT MUX
HDMI IN HDMI4 DSD
HBR
HDMI5
MCLK
ADV8195
FRONT TMDS SCLK
HDMI BUFFER
28.6363MHz
ADV 7623
HDMI TRANCEIVER

NR1403 ONLY
DIN_FLFR
RXSPDIF
RXMCLK
RXFS
I2S
RX64FS
SBCK
DIR_DATA DECODER
DIR_64FS
DEMO_ DSPIN_FS
DETECT FUNCTION
OPTICAL RX610 2M
DIR_256FS
DIR_64FS
NR14/1603 : 1 / 1
DIR_FS
74LVC157.
DIR CONT.
PLD CONT
HDMI
CEC
HPD
FLASH
OSD DATA
AK5358 TUNER CONT
NETWORK POWER CONT
A/D CONVERTER
DAC_256FS
DAC_64FS
DAC_FS
SBL/SBR
SL/SR
FL/FR
CONTROLLER
C/SW
ETHERNET
ETHERNET
MUTE
PHY DM860A RELAY
SDRAM SDRAM
LAN8720 FL CONT
SERIAL I/O
Interface ATT
H/P-L
I2S
MAIN ZONE DAC
AK4358VQ H/P-R
HEADPHONE OUT
FILTER FILTER FL
FL
FL
DAC PCM5100
FR
DA-SBR
DA-SBL
DA-SW
DA-SR
DA-SL
DA-FR
DA-FL
FR
DA-C
NR1603 ONLY C
C
C
SL SL
SL SPK OUT
ANA_FL Bypass
DSP_FL Tone
ANALOG TONE SR
FL
Tone+Mix SR
SR

PRE-FL
SBL SBL
TONE FR
Bypass
PRE-FR SBR SBR

NR1603 ONLY
DSP_C
C
NR1603 : FM ONLY
NR1403 : FM/AM
TUNER
DSP_SW
SW1 0.1ch PREOUT
R2A15218FP
SL
M-Xport PRE-FL FL
DSP_SR
SR
NR14/1603 2.1ch
DSP_SBL
SBL
ZONE_L
TO MICOM

SBR
ZONE_R
BI_AMP NR1603 ONLY
51
fig.14
NR1603 ONLY 27MHz
HDMI RECEIVER
HDMI1 ADV7850 4
27MHz
ADV8002-4
OUTPUT MUX
HDMI IN HDMI4 DSD
HBR
HDMI5
MCLK
ADV8195
FRONT TMDS SCLK
HDMI BUFFER
28.6363MHz
ADV 7623
HDMI TRANCEIVER

NR1403 ONLY
DIN_FLFR
RXSPDIF
RXMCLK
RXFS
I2S
RX64FS
SBCK
DIR_DATA DECODER
DIR_64FS
DEMO_ DSPIN_FS
DETECT FUNCTION
OPTICAL RX610 2M
DIR_256FS
DIR_64FS
NR14/1603 : 1 / 1
DIR_FS
74LVC157.
DIR CONT.
PLD CONT
HDMI
CEC
HPD
FLASH
OSD DATA
AK5358 TUNER CONT
NETWORK POWER CONT
A/D CONVERTER
DAC_256FS
DAC_64FS
DAC_FS
SBL/SBR
SL/SR
FL/FR
CONTROLLER
C/SW
ETHERNET
ETHERNET
MUTE
PHY DM860A RELAY
SDRAM SDRAM
LAN8720 FL CONT
SERIAL I/O
Interface ATT
H/P-L
I2S
MAIN ZONE DAC
AK4358VQ H/P-R
HEADPHONE OUT
FILTER FILTER FL
FL
FL
DAC PCM5100
FR
DA-SBR
DA-SBL
DA-SW
DA-SR
DA-SL
DA-FR
DA-FL FR
DA-C
NR1603 ONLY C
C
C
SL SL
SL SPK OUT
ANA_FL Bypass
DSP_FL Tone
ANALOG TONE SR
FL
Tone+Mix SR
SR

PRE-FL
SBL SBL
TONE FR
Bypass
PRE-FR SBR SBR

NR1603 ONLY
DSP_C
C
NR1603 : FM ONLY
NR1403 : FM/AM
TUNER
DSP_SW
SW1 0.1ch PREOUT
R2A15218FP
SL
M-Xport PRE-FL FL
DSP_SR
SR
NR14/1603 2.1ch
DSP_SBL
SBL
ZONE_L
TO MICOM

SBR
ZONE_R
BI_AMP NR1603 ONLY
52
S1(AMP +B)
S2(+8V,-8V)
S4(VIDEO)
MAIN TRANS
S5(VKK)
S6(FILAMENT)
AC CORD
MAIN PWR ON
CPU PWR ON
53
Personal notes: Personal notes:
54
JIG FOR SERVICING
When you repair the printing board, you can use the following JIG (Extension cable kit).
Please order it from Marantz Official Service. Distributor in your region if necessary.
NOTE: The incorrect connection with in the JIG (EXTENSION UNIT KIT) may cause damage.
• Connection of PCB HDMI JIG

-Preparation-
Insulation sheet (Do not supply it) : 1 sheet
Ground lead (Do not supply it) : 1 pc
-Procedures-
(1) Remove the screws, then remove the BACK PANEL.
(2) Disconnect the connector board.
Board to board PCB HDMI
HOLDER
Board to board
55
Board to board
PCB VIDEO
(3) Detach PCB HDMI from the chassis, and turn it over.
Please put an insulation sheet that is larger than PCB HDMI under PCB.
Attach the BACK PANEL.
PCB HDMI
Insulation sheet
CHASSIS-HDMI CONNECTOR
b Connect the ground point of PCB to the chassis with a ground lead or the like.
(4) Connect the six extension jig cables.
4 5 6
2 PCB HDMI
56
Connection table of Board to Board
No. Pin Ref. No. PCB Ref. No. PCB
q 16 pin CP4604 SIDE CNT N3403 HDMI
w 4 pin CP4605 SIDE CNT N3406 HDMI
e 12 pin CP4606 FRONT CNT N3407 HDMI
r 4 pin CP4511 FRONT CNT N3404 HDMI
t 5 pin CP4609 FRONT CNT N3402 HDMI
y 7 pin CP4607 FRONT CNT N3401 HDMI
57
WHEN THE MICROPROCESSOR IS REPLACED WITH A NEW ONE
When the U-PRO (Microprocessor) or the Flash ROM is replaced, confirm the following.
After
PCB Name Ref. No. Description Remark
replaced
HDMI U3002 R5F56108VNFP B SOFTWARE: Main
HDMI U2003 EN29LV160BB-70TIP B SOFTWARE: DSP ROM
HDMI U2205 EPM3032A-TC44 B SOFTWARE: AUDIO PLD
HDMI U1602 MX25L6406EM2I-12G C SOFTWARE: GUI ROM
After replacing
A : Mask ROM (With software). No need for write-in of software to the microprocessor.
B : Flash ROM (With software). Usually, no need for write-in of software. But, when the software was updated, you should
write the new software on the microprocessor or flash ROM. Please check the software version.
C : Empty Flash ROM (Without software). You should write the software on the microprocessor or flash ROM.
Refer to "Update procedure" or "writing procedure", when you write the software.
PROCEDURE FOR UPGRADING THE VERSION OF THE FIRMWARE

NOTE: When the following are replaced, always rewrite with updated firmware using DFW. (Refer to parts list of "HDMI
PCB UNIT ASS'Y" (203 page)
• PCB HDMI ASSY
• U1602 (MX25L6406EM2I-12G)
• U2205 (EPM3032A-TC44)
• U3002 (R5F56108VNFP)
• U2003 (EN29LV160BB-70TIP)
1. How to update by DFW

[NR1603U, N, K models]
1.1. Preparations before starting the operation
(1) Personal Computer (Installed "DFW_0013_NR1603_(Rev.X.X.X).exe".
(2) RS-232C cable (9P (Male), Straight).
(3) 8U-210100S WRITING KIT.
1.2. Connection of AV receiver

(1) Confirm the power on/off switch of the AV receiver is turning off.
(2) Connect the update terminal of AV receiver with the "WRITING KIT".
(3) Connect the RS-232C cable from PC with the "WRITING KIT".
4P FFC Cable S706-709 : No Preference S702 : 3.3V

S709
S708
S707
S706
S702
This side is contacts of

flexible card cable.
RS-232C Cable
WRITING KIT
PC
58
[All model commonness]
1.3. Turn on the AV receiver
Operate the following. Turn on the AV receiver.
(1) Connect the power cable to the AC outlet while simultaneously pushing the "M-DAX" and "SOUND MODE" button of
the front panel.
(2) Confirm the power indicator is green and "WRITTING" is displayed in the front panel.
1.4. Run the DFW

Run the "DFW_0013_NR1603_(Rev.X.X.X).exe" on desktop of PC.
1.5. Communication check

(1) Select the serial port number of RS-232C in PC.
(2) Click the "Check Comm." button.
2
1
59
(3) When connection is good, then you can see the "Communication check OK." message.
(4) If connection is not good, then you can see the "Communication check NG" message.
Please confirm the following

(a) Check the connection of the AV receiver and PC. (refer to "1.2. Connection of the AV receiver" )
(b) Check the operation mode of the AV receiver. (refer to "1.3.Turn on the AV receiver")
(c) Check the selection of the RS-232C port number of PC.
1.6. Download the firmware

(1) Click the "Load" button.
(2) Download the firmware from the specified download source to PC.
XXX-XXXX
XXX-XXXX_WWWXXXXYYYY-ZZZZ.bin
XXX-XXXX_WWWXXXXYYYY-ZZZZ.bin
60
1.7. Complete the firmware updating
(1) Click the "Update" button.
XXXXXXX XXXXXXXX
(2) When writing of the firmware is completed, the power of AV receiver turns on automatically and you can see the
"Update completed" message.
(3) If you can’t complete the firmware update, please retry the firmware update from "1.3. Turn on the AV receiver".
1.8. Notice:
Please keep the following notice for firmware update.
(a) Keep the PC environment
(b) Avoid the communication cable from the electrical noise source.
(e.g. telephone cable, AC line, a fluorescent light)
(c) Don’t remove cable during update.
(d) Don’t turn off the power during update.
(e) Don’t run other PC application during update.
(f) Stop the resident program on PC (Virus checker and System check utility, etc.)
(g) Stop the screen saver on PC.
(h) Stop the power save ability on PC.
(i) In case of laptop PC, Use the AC adaptor.
Confirming the firmware’s number after upgraded

After updating the firmware, check the version. Refer to "1. μcom/DSP Version display mode" (24 page ).
61
2. How to update by DPMS
You can update the firmware by downloading the latest version from the Internet.
2.1. Connecting to the Network
(1) System requirements
• Internet Connection by Broadband Circuit
• Modem
• Router
• Ethernet cable (CAT-5 or greater recommended)
(2) Setting
Internet
Computer
Modem LAN port/

Ethernet
connector
To WAN port
Router
To LAN port
To LAN port
NETWORK
connector
2.2. Checking and updating the firmware

Check if the latest firmware exists. You can also check approximately time required to complete an update.
(1) Press the "SETUP" button on the remote control to display the GUI menu.
(2) Use the cursor buttons to select "General" → "Firmware" → "Update" → "Check for Update".
(3) Press the "ENTER" button.
• The latest version of the firmware on the website is displayed.
• If the firmware on the website is latest, proceed to (4).
• If the latest firmware has been already installed, press the "SETUP" button to close the menu.
(4) Use the cursor buttons to select "Start", then press the "ENTER" button.
• During update, the power indicator lights in red and the GUI screen disappears. And an approximately remaining
time is indicated on the display.
• When updating is complete the power indicator lights in green and normal status is resumed.
--- Cautions on Firmware Update ---

• In order to update the firmware, you must have the correct system requirements and settings for a broadband Internet
connection.
• Do not turn off the power until updating is completed.
• Even with a broadband connection to the Internet, approximately 1 hour is required for the updating procedure to be
completed.
Once updating starts, normal operations on the this unit cannot be performed until updating is completed. Also, setting
items of the GUI menu of this unit or setting items of the image adjustment may be initialized.
Note down the settings before updating, and set them again after updating.
62
2.3. About the error code
See the table below for error codes, details of faults, and coping strategies when the firmware is updated through DPMS
(Marantz Product Management Server).
Error
Details of Error code Display Coping strategies
Code
Reset and update again.

01 Log-in to DPMS failed. Login failed 01 Carry out the update in an environment
that has little network load.
Line, etc., is busy when logging into Carry out the update in an environment
02 Server is busy02
DPMS. that has little network load.
Check the network connection.

03 Connection to DPMS failed. ConnectionFail03 Carry out the update in an environment

Firmware file data was requested but
04 ConnectionFail04 Carry out the update in an environment
error message was received.

it timed out.

error message was received.

All firmware file data was requested
but it timed out.
Firmware file data of Main CPU was Check the network connection.
08 requested but error message was ConnectionFail08 Carry out the update in an environment
received. that has little network load.

Firmware file data of Main CPU was
requested but it timed out.
Error (NG) message was received Check the network connection.

0A when firmware of Main CPU was Download fail 0A Carry out the update in an environment
downloaded. that has little network load.
Error (line congestion) message was Check the network connection.

0B received when firmware of Main CPU Download fail 0B Carry out the update in an environment
was downloaded. that has little network load.
Error (connection failure) message Check the network connection.

0C was received when firmware of Main Download fail 0C Carry out the update in an environment
CPU was downloaded. that has little network load.

0D Received Package Version is wrong. D o w n l o a d f a i l 0 D Carry out the update in an environment

Connection to DPMS failed.
0E ConnectionFail0E Carry out the update in an environment
(can not get NTP)
Main CPU failed to receive firmware

Turn off and on the power. Updating
10 for rewriting sent from Updating fail 10 starts automatically.
DM860A (when timed out).
63
Error
Code
Main CPU failed to receive firmware

Turn off and on the power.
11 for rewriting sent from DM860A (when Updating fail 11 Updating starts automatically.
an error occurred).
There was invalid data in the firmware

for rewriting sent from DM860A to Turn off and on the power.
12 Updating fail 12
Main CPU (when a Check Sum error Updating starts automatically.
occurred).
The deletion of block data failed Turn off and on the power.
13 Erase fail 13
before Main CPU was rewritten. Updating starts automatically.
The rewriting of block data failed Turn off and on the power.
14 Updating fail 14
when Main CPU was rewritten. Updating starts automatically.
The data verification was invalid after Turn off and on the power.
15 UpdateCheckNG 15
Main CPU was rewritten. Updating starts automatically.
Failure to acquire (Boot Loader Mode) Check the network connection.

20 IP address before rewriting DM860A ConnectionFail20 Carry out the update in an environment
(AutoIP). that has little network load.

21 IP address before rewriting DM860A ConnectionFail21 Carry out the update in an environment
(when timed out). that has little network load.
Reset and update again.

22 Log-in to DPMS failed. Login failed 22 Carry out the update in an environment
Line, etc., is busy when logging into Carry out the update in an environment
23 Server is busy23
DPMS. that has little network load.

24 Connection to DPMS failed. ConnectionFail24 Carry out the update in an environment
25 Mode change failure of DM860A. ConnectionFail25 Reset and update again.
Data acquisition failed (timed out)

when firmware of Main CPU was
26 Download fail 26 Carry out the update in an environment
downloaded. Received Package
Version is wrong.
27 Mode change failure of DM860A. Download fail 27 Reset and update again.
Log-in to DPMS failed when Main Carry out the update in an environment
36 Login failed 36
CPU was rewritten. that has little network load.
Line, etc., is busy when logging

Carry out the update in an environment
37 into DPMS when Main CPU was Server is busy37 that has little network load.
rewritten.

Connection to DPMS failed when
Main CPU was rewritten.
64
Error
Code

Connection to DPMS timed out
when Main CPU was rewritten.

Error (NG) message was received
Updating starts automatically.
3A when firmware was downloaded or Download fail 3A Carry out the update in an environment
Main CPU was rewritten.
Error (line congestion) message
3B received when downloading firmware Download fail 3B Carry out the update in an environment
Error (connection failure) message
3C received when downloading firmware Download fail 3C Carry out the update in an environment

3D IP address before rewriting DM860A ConnectionFail3D Carry out the update in an environment
(AutoIP). that has little network load.

3E IP address before rewriting DM860A ConnectionFail3E Carry out the update in an environment
(when timed out). that has little network load.
Log-in to DPMS failed when firmware Carry out the update in an environment
50 Login failed 50
such as DSP and PLD was rewritten. that has little network load.
Line, etc., is busy when the log-in to

Carry out the update in an environment
51 DPMS when firmware such as DSP Server is busy51 that has little network load.
and PLD was rewritten.
Connection to DPMS failed when Check the network connection.

52 firmware such as DSP and PLD was ConnectionFail52 Carry out the update in an environment
rewritten. that has little network load.
Error message received regarding Turn off and on the power.

firmware data after the log-in to Updating starts automatically.
54 Updating fail 54
DPMS when firmware such as DSP Carry out the update in an environment
and PLD was rewritten. that has little network load.
When firmware such as DSP and Turn off and on the power.
PLD was rewritten, request was made Updating starts automatically.
55 Updating fail 55
for firmware data after the log-in to Carry out the update in an environment
DPMS, but it timed out. that has little network load.
Downloading firmware failed after the
56 log-in to DPMS when firmware such Download fail 56 Carry out the update in an environment
as DSP and PLD was rewritten.
Firmware download error received Turn off and on the power.
(line congestion) after the log-in to Updating starts automatically.
57 Download fail 57
Firmware download error received Turn off and on the power.
(connection failure) after the log-in to Updating starts automatically.
58 Download fail 58
NACK was received when "C" Turn off and on the power.
5A ConnectionFail5A
command sent to DSP, PLD etc. Updating starts automatically.
NACK was received when "L" Turn off and on the power.
5B Updating fail 5B
65
Error
Code
DSP, PLD etc. failed to receive

5C firmware for rewriting sent from Updating fail 5C Updating starts automatically.
DM860A (when timed out).
DSP, PLD etc. failed to receive

5D firmware for rewriting sent from Updating fail 5D Updating starts automatically.
DM860A (when an error occurred).
Data in firmware such as DSP and

PLD for rewriting sent from DM860A Turn off and on the power.
5E Updating fail 5E
was invalid (when a Check Sum error Updating starts automatically.
occurred).
Invalid data in firmware such as
DSP and PLD for rewriting sent from Turn off and on the power.
5F Updating fail 5F
DM860A was invalid (invalid data was Updating starts automatically.
received).
NACK was received when "P" Turn off and on the power.
60 Updating fail 60
NACK was received when "I" Turn off and on the power.
61 UpdateCheckNG 61
Acquisition of serial flash data failed Turn off and on the power.
80 Updating fail 80
before serial flash was deleted. Updating starts automatically.
Deleting data failed before serial flash Turn off and on the power.
81 Updating fail 81
was rewritten. Updating starts automatically.
Receiving firmware for rewriting serial

82 flash sent by DM860A failed (when Updating fail 82 Updating starts automatically.
timed out).

83 flash sent by DM860A failed (when an Updating fail 83 Updating starts automatically.
error).

84 flash sent by DM860A failed (when a Updating fail 84 Updating starts automatically.
Check Sum error).

85 flash sent by DM860A failed (when Updating fail 85 Updating starts automatically.
invalid data was received).
The data verification was invalid after Turn off and on the power.
86 Updating fail 86
serial flash was rewritten. Updating starts automatically.
Acquisition of (Application Mode) IP Check the network connection.

A0 address failed before DM860A was ConnectionFailA0 Carry out the update in an environment
rewritten (AutoIP). that has little network load.
Acquisition of (Application Mode) IP Check the network connection.

A1 address failed before DM860A was ConnectionFailA1 Carry out the update in an environment
rewritten (when timed out). that has little network load.
Invalid login via DPMS access

was notified when DM860A related
A2 Login failed A2 Carry out the update in an environment
firmware was rewritten (Application
Mode).
66
Error
Code
Line congestion via DPMS access
A3 Server is busyA3 Carry out the update in an environment
Mode).
Connection failure via DPMS access
A4 ConnectionFailA4 Carry out the update in an environment
Mode).
Firmware data error message was Turn off and on the power.
received after DPMS login when Updating starts automatically.
A6 Updating fail A6
DM860A related firmware was Carry out the update in an environment
rewritten (Application Mode). that has little network load.
When DM860A related firmware was Turn off and on the power.
rewritten (Application Mode), request Updating starts automatically.
A7 Updating fail A7
was made for firmware data after Carry out the update in an environment
DPMS login but it timed out. that has little network load.
Firmware download error message Turn off and on the power.
received (when download fails) Updating starts automatically.
AE Download fail AE
when DM860A related firmware was Carry out the update in an environment
rewritten (Boot Loader Mode). that has little network load.
received (line congestion) when Updating starts automatically.
AF Download fail AF
received (connection failure) when Updating starts automatically.
B0 Download fail B0
Firmware download error message. Updating starts automatically.
B1 Download fail B1
(Timeout failure) Carry out the update in an environment
Error message received when
B2 DM860A related firmware was Download fail B2 Carry out the update in an environment
rewritten.
Firmware writing error message. Updating starts automatically.
B3 Updating fail B3
(Timeout failure ) Carry out the update in an environment
Mode change failure of DM860A.

B4 Updating fail B4 Reset and update again.
(Boot Loader Mode)
Mode change failure of DM860A.

B5 Updating fail B5 Reset and update again.
(Application Mode)
67
Device display during firmware update
Display of target device during firmware update.
Target device Display Error code when an error occurs
08 - 0C
10 - 15
Main Main:**% ***min 22 - 24
36 - 3E
50 - 52
Audio PLD APLD:**% ***min 54 - 58
5A - 61
50 - 52
DSP DSP :**% ***min 54 - 58
5A - 61
50 - 52
54 - 58
GUI Serial Flash GUI :**% ***min 5A - 61
80 - 86
A0 - A4
DM860A Boot Loader ESBL:**% ***min A6 - A7
AE - B5
A0 - A4
DM860A Image EIMG:**% ***min A6 - A7
AE - B5
DM860A Image (Emergency Mode) Update retry –

After updating the firmware, check the version. Refer to "1. μcom/DSP Version display mode" (24 page).
68
3. How to update by USB Memory
You can update the firmware by downloading the latest version with USB Memory.
3.1. Connecting to the Network
(1) Requirements
• USB Memory capacity : FAT16 : 2 GB, FAT32 : 2 TB
• USB memory devices will not work via a USB hub.
• It is not possible to use this unit by connecting the unit’s USB port to a PC via a USB cable.
• Do not use an extension cable when connecting a USB memory device.
This may cause radio interference.
Place the USB update File in an appropriate folder. The folder name should be the Product ID based on the Model
name/area.
Model Name Model Area Product ID
North America (U) 100100130100

NR1603 Europe (N) 100100130200
China (K) 100100130500
(2) Setting
Download
firmware onto USB
memory.
Do not place anything other than

z
the Firmware in the USB memory.
Insert the USB memory into a USB port.
3.2. Download the firmware

(1) While pressing the "DISPLAY" button and the "SOUND MODE" button at the same time, power on this unit.
(2) "USB Update Start" appears in the FL Display.
(3) Press the "ENTER" button on remote control. "UpdateFileCheck" appears in the FL Display and the Update of the
Firmware starts.
(4) During the update, the power indicator lights in red and the GUI screen display disappears.
The remaining update time appears in the display on the main unit.
When the update is completed, "Updateing Complete" appears in the FL Display and then this unit returns to the
normal state.
(5) Execute a initialization (10 page).

• Do not remove a USB memory until updating is completed.
• Do not turn off the power until updating is completed.
Approximately 1 hour is required for the updating procedure to be completed.
Once updating starts, normal operations on the this unit cannot be performed until updating is completed. Also, setting
items of the GUI menu of this unit or setting items of the image adjustment may be initialized.
Note down the settings before updating, and set them again after updating.
69
3.3. About the error code
See the table below for error codes and details of faults when the firmware is updated through USB memory.
Error
Code
Disconnect and connect the USB
01 Unable to detect USB. ConnectionFail01 memory.
Make sure that the FirmwareFile is in
02 No FirmwareFile in USB. FilesNotFound 02 the USB memory.
FirmwareFile in USB for unsupported Check the supported Model name/area
03 NotMatchFirm 03
Model name/area for the FirmwareFile.
Failed to obtain individual Firmware
04 ConnectionFail06 Start the USB Update again.
information.
TimeOut while obtaining individual
Firmware information
Failed to obtain entire Firmware
information.
TimeOut while obtaining entire
Firmware information
This unit automatically retries several
times. Wait until the FL display stops.
Error notification received while
08 ConnectionFail08 If the FL display stops at the Error
requesting FirmwareInfo.
display, press and hold the "ON/
STANDBY (X)" button for five seconds.
TimeOut while obtaining Firmware
information
Unable to detect USB for Disconnect and connect the USB
0A ConnectionFail0A
FirmwareDownload. memory.
No FirmwareFile for Disconnect and connect the USB
0B FilesNotFound 0B
FirmwareDownload. memory.
Received value with invalid
0D ConnectionFail0D If the FL display stops at the Error
PackageVersion.
No UpdatePacket received from
10 Updating fail 10 If the FL display stops at the Error
DM860A (TimeOut).
Abnormal data in UpdatePacket
received from DM860A (FormatError).
Abnormal data in UpdatePacket times. Wait until the FL display stops.
12 received from DM860A Updating fail 12 If the FL display stops at the Error
(CheckSumError). display, press and hold the "ON/
BlockErase failed before rewriting
13 Erase fail 13 If the FL display stops at the Error
Main.
14 BlockWrite failed while rewriting Main. Updating fail 14 If the FL display stops at the Error
Error in Verify after rewriting Main
15 UpdateCheckNG 15 If the FL display stops at the Error
(CheckSumError).
Disconnect and connect the USB
20 Unable to detect USB after SBLMode. ConnectionFail20 memory.
70
Error
Code
No FirmwareFile in USB after Disconnect and connect the USB
21 FilesNotFound 21
SBLMode. memory.
FirmwareFile in USB after SBLMode Check the supported Model name/area
22 NotMatchFirm 22
for unsupported Model name/area for the FirmwareFile.
Failed to obtain entire Firmware Disconnect and connect the USB
23 ConnectionFail23
information after SBLMode. memory.
TimeOut while obtaining entire
Firmware information after SBLMode
25 Failed to transit to SBLMode. ConnectionFail25 If the FL display stops at the Error
TimeOut in Download (writing to
26 Download fail 26 If the FL display stops at the Error
SDRAM) for FirmwareDownload
Failed to write to EEPROM after
SBLMode.
36 Unable to detect USB. ConnectionFail36 If the FL display stops at the Error
display, press and hold the POWER
button for five seconds.
37 No FirmwareFile in USB. FilesNotFound 37 If the FL display stops at the Error
FirmwareFile in USB for unsupported
38 NotMatchFirm 38 If the FL display stops at the Error
Model name/area
39 TimeOut in USBCheck ConnectionFail39 If the FL display stops at the Error
Unable to detect USB for
3A ConnectionFail3A If the FL display stops at the Error
FirmwareDownload.
No FirmwareFile for
3B FilesNotFound 3B If the FL display stops at the Error
FirmwareDownload.
3F Failed to transit to SBLMode. ConnectionFail3F If the FL display stops at the Error
50 Unable to detect USB. ConnectionFail50 If the FL display stops at the Error
71
Error
Code
51 No FirmwareFile in USB. FilesNotFound 51 If the FL display stops at the Error
52 NotMatchFirm 52 If the FL display stops at the Error
Model name/area
55 TimeOut while obtaining Firmware Updating fail 55 If the FL display stops at the Error
FirmwareDownload.
No FirmwareFile for
57 FilesNotFound 57 If the FL display stops at the Error
FirmwareDownload.
Invalid DeviceID in response or no
5A ConnectionFail5A If the FL display stops at the Error
response from Sub for C command.
NACK received in response or no
5B Updating fail 5B If the FL display stops at the Error
response from Sub for L command.
5C Updating fail 5C If the FL display stops at the Error
DM860A (TimeOut).
5D Updating fail 5D If the FL display stops at the Error
5E received from DM860A Updating fail 5E If the FL display stops at the Error
5F received from DM860A (DataLength/ Updating fail 5F If the FL display stops at the Error
DataNo). display, press and hold the "ON/
NACK received in response or no
response from Sub for P command.
72
Error
Code
Mismatched CheckSum in response times. Wait until the FL display stops.
61 or no response from Sub for I UpdateCheckNG 61 If the FL display stops at the Error
command. display, press and hold the "ON/
Failed to start up Sub in PowerOn
sequence during Update.
63 Failed to transit to ApplicationMode. Updating fail 63 If the FL display stops at the Error
64 Failed to transit to BootLoaderMode. Updating fail 64 If the FL display stops at the Error
WriteEnableLatchBit not set in Read
after issuing WREN command.
BlockErase failed in Read after
issuing BE command.
DM860A (TimeOut).
84 received from DM860A Updating fail 84 If the FL display stops at the Error
85 received from DM860A (DataLength/ Updating fail 85 If the FL display stops at the Error
DataNo). display, press and hold the "ON/
Mismatched CheckSum in CheckSum
comparison after rewriting.
A2 Unable to detect USB. ConnectionFailA2 If the FL display stops at the Error
A3 No FirmwareFile in USB. FilesNotFound A3 If the FL display stops at the Error
73
Error
Code
A4 NotMatchFirm A4 If the FL display stops at the Error
Model name/area
A6 Updating fail A6 If the FL display stops at the Error
A7 TimeOut while obtaining Firmware Updating fail A7 If the FL display stops at the Error
AE ConnectionFailAE If the FL display stops at the Error
FirmwareDownload.
No FirmwareFile for
AF FilesNotFound AF If the FL display stops at the Error
FirmwareDownload.
TimeOut in Download (writing to
B1 Download fail B1 If the FL display stops at the Error
SDRAM) for FirmwareDownload
Error notification received after
B2 Updating fail B2 If the FL display stops at the Error
rewriting DM860A Firm.
B3 Error in FirmwareUpdate (TimeOut). Updating fail B3 If the FL display stops at the Error
B4 Failed to transit to BootLoaderMode. Updating fail B4 If the FL display stops at the Error
B5 Failed to transit to ApplicationMode. Updating fail B5 If the FL display stops at the Error

When an error code as shown above appears in the DISPLAY, check the following:
• Check whether the Firmware downloaded to the USB memory is correct (whether the MODEL name and area of the
downloaded Firmware match those for the product, and whether the USB Memory contains data other than the latest
Firmware).
• Update after resetting the product.
• Use a different USB memory.
74
3.4. Device display during firmware update
Display of target device during firmware update.
Target device Display Error code when an error occurs
08 - 0B
10 - 15
Main CPU Main:**% ***min 20 - 27
36 - 3B
3F
50 - 52
Audio PLD APLD:**% ***min 54 - 58
5A - 64
50 - 52
DSP DSP :**% ***min 54 - 58
5A - 64
50 - 52
54 - 58
GUI Serial Flash GUI :**% ***min 5A
62 - 64
80 - 86
A0 - A4
DM860A Boot Loader ESBL:**% ***min A6 - A7
AE - B5
A0 - A4
DM860A Image EIMG:**% ***min A6 - A7
AE - B5
DM860A Image (Emergency Mode) Update retry –

After updating the firmware, check the version. Refer to "1. μcom/DSP Version display mode" (24 page).
75
ADJUSTMENT
Audio Section
Adjusting Idling Current
Required measurement equipment: DC Voltmeter
1. Preparation
(1) Temperature should be at avoid direct blow from an air conditioner or an electric fan and humidity should be
moderate, and place the set at normal usage environment.
15 °C ~ 30 °C (59 °F ~ 86 °F)
(2) Presetting
• POWER (Power source switch) STANDBY
• SPEAKER (Speaker terminal) No load
(Do not connect speaker, dummy resistor, etc.)
2. Adjustment
(1) Remove the top cover and set VR401, VR402, VR403, VR404, VR405, VR406, VR407 on at fully 7CH AMP UNIT at
fully counterclockwise (c) position.
(2) Connect DC Voltmeter to test points (FRONT-Lch: TP401, FRONT-Rch: TP402, CENTER ch: TP403, SURROUND-
Lch: TP404, SURROUND-Rch: TP405, SURROUND-BACK Lch: TP406, SURROUND-BACK Rch: TP407.
(3) Connect the power cord to AC Line, and set the power switch to "ON".
(4) Presetting.
MASTER VOLUME : "---" counterclockwise (c min.)
SPEAKER (Speaker terminal) : No load
(Do not connect speaker, dummy resistor, etc.)
MODE : MCH STEREO
FUNCTION : DVD
(5) Within 2 minutes after the power on, turn VR401 clockwise (x) to adjust the TEST POINT voltage to
2.0mV ± 0.5mV DC.
(6) After 10 minutes from the preset above, turn VR401 to set the voltage to 3.0mV ± 0.5mV DC.
(7) Adjust the Variable Resistors of each channel in the same way.
7CH AMP UNIT
DC Voltmeter
TP403
VR401 VR404 VR403 VR405 VR402 VR406 VR407
TP404 TP405
TP401 TP402 TP406 TP407
C ch
S Lch S Rch
F Rch S Back Lch
F Lch S Back Rch
76
This unit is equipped with a digital signal processing circuit that lets you play program sources in the sound mode to achieve the same sense of presence as in a movie theater.
Sound modes and surround parameters

This table shows the speakers that can be used in each sound mode and the surround parameters adjustable in each sound mode.
Symbols in the table

S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”.
Channel output Surround Parameter
Sound Mode Front Surround Front height Loudness Management Dynamic Compression Low Frequency Effects
Center Surround back L/R Subwoofer Home Theater EQ
L/R L/R L/R z2 z3 z4
DIRECT/PURE DIRECT (2channel)z1 S Dz5 S S
DIRECT/PURE DIRECT (Multi-channel)z1 S D D Dz6 Dz6 D S S S
STEREO S D S S S
MULTI CH IN S D D D Dz7 D Sz8 S
DOLBY PRO LOGIC gz S D D D D S S S
DOLBY PRO LOGIC gx S D D D D Sz9 S S
DOLBY PRO LOGIC g S D D D Sz10 S S
DOLBY PRO LOGIC S D D D S S S
DTS NEO:6 S D D D D Sz7 S S
DOLBY DIGITAL S D D D Dz7 D Sz8 S
DOLBY DIGITAL Plus S D D D Dz7 D Sz8 S
DOLBY TrueHD S D D D Dz7 D Sz8 S S S
77
DTS SURROUND S D D D Dz7 D Sz8 S
DTS 96/24 S D D D Dz7 D Sz8 S
SURROUND MODES AND PARAMETERS
DTS-HD S D D D Dz7 D Sz8 S

DTS Express S D D D Dz7 D Sz8 S
MULTI CH STEREO S D D D D D S S S
VIRTUAL S D S S S
z1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z2 This item can be selected when a Dolby TrueHD signal is played.
z3 This item can be selected when a Dolby Digital or DTS signal is played.
z4 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z5 Only when “Subwoofer Mode” is set to “LFE+Main”, sound is output from the subwoofer.
z6 A signal for each channel contained in an input signal is output as audio.
z7 Audio is output from the front height speaker when the set sound mode name contains “+PLgz”. For information on how to check the sound mode.
z8 This setting is unavailable when the set sound mode name contains “+PLgx Music”. For information on how to check the sound mode.
z9 This setting is possible when the sound mode is “PLgx Movie” or “DTS NEO:6 Cinema”.
z10 This setting is possible when the sound mode is “PLg Movie”.
Surround Parameter
Audyssey z12
PRO LOGIC g/gx Music mode only NEO:6 Music mode only Tone M-DAX
Sound Mode Subwoofer
z11 Dynamic EQ Dynamic Volume z14
Panorama Dimension Center Width Center Image MultEQ®
z13 z13
DIRECT/PURE DIRECT (2channel)z1 Sz5
DIRECT/PURE DIRECT (Multi-channel)z1 S
STEREO S S S S S
MULTI CH IN S S S S S
DOLBY PRO LOGIC gz S S S S S S
DOLBY PRO LOGIC gx S S S S S S S S S
DOLBY PRO LOGIC g S S S S S S S S S
DOLBY PRO LOGIC S S S S S S S S S
DTS NEO:6 S S S S S S S
DOLBY DIGITAL S S S S S
DOLBY DIGITAL Plus S S S S S
DOLBY TrueHD S S S S S
DTS SURROUND S S S S S
DTS 96/24 S S S S S
DTS-HD S S S S S
DTS Express S S S S S
MULTI CH STEREO S S S S S S
VIRTUAL S S S S S S
78
z1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z5 Only when “Subwoofer Mode” is set to “LFE+Main”, sound is output from the subwoofer.
z11 This item cannot be set when “Dynamic EQ” is set to “On”.
z12 For HD Audio whose sampling frequency of an input signal is more than 96 kHz, this sound parameter cannot be set.
z13 This item cannot be set when “MultEQ®” is set to “Off” or “Graphic EQ”.
z14 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
n Types of input signals, and corresponding sound modes
This table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode.
Symbols in the table

F This indicates the default sound mode.
S This indicates the selectable sound mode.
Input signal types and formats
PCM DTS-HD DTS DOLBY DOLBY DIGITAL
Sound Mode NOTE DTS-HD High DTS ES DTS ES DOLBY DOLBY DIGITAL DOLBY DOLBY
ANALOG PCM PCM DTS-HD DTS DTS DOLBY DOLBY
Resolution DSCRT MTRX DTS 96/24 DIGITAL EX EX DIGITAL DIGITAL
(multi ch) (2ch) Master Audio EXPRESS (5.1ch) TrueHD DIGITAL Plus
Audio (With Flag) (With Flag) (With Flag) (With no Flag) (5.1ch) (2ch)
DTS SURROUND
DTS-HD MSTR F
DTS-HD HI RES F
DTS ES DSCRT6.1 z1z2 F
DTS ES MTRX6.1 z1z2 F
DTS SURROUND S S F
DTS 96/24 F
DTS (–HD) + PLgx MOVIE z1z3 S S S S S
DTS (–HD) + PLgx MUSIC z1z2 S S S S S
DTS (–HD) + PLgz z4z5 S S S S S S S
DTS EXPRESS F
DTS (–HD) + NEO:6 z1z2 S S S S S
DTS NEO:6 CINEMA S S S
79
DTS NEO:6 MUSIC S S S
DOLBY SURROUND
DOLBY TrueHD F
DOLBY DIGITAL+ F
DOLBY DIGITAL EX z1z2 S S S
DOLBY (D+) (HD) +EX z1z2 S S
DOLBY DIGITAL S F F
DOLBY (D) (D+) (HD) +PLgx MOVIE z1z3 S S F S S
DOLBY (D) (D+) (HD) +PLgx MUSIC z1z2 S S S S S
DOLBY (D) (D+) (HD) +PLgz z4 S S S S S
DOLBY PRO LOGIC gx MOVIE z1z2 S S S
DOLBY PRO LOGIC gx MUSIC z1z2 S S S
DOLBY PRO LOGIC gx GAME z1z2 S S S
DOLBY PRO LOGIC gz z4z5 S S S
DOLBY PRO LOGIC g MOVIE S S S
DOLBY PRO LOGIC g MUSIC S S S
DOLBY PRO LOGIC g GAME S S S
DOLBY PRO LOGIC S S S
z1 This sound mode can be selected when “Assign Mode” is set to “Surround Back”.
z2 If “Speaker Config.” – “Surr. Back” is set to “None”, this sound mode cannot be selected.
z3 If “Speaker Config.” – “Surr. Back” is set to “1spkr” or “None”, this sound mode cannot be selected.
z4 If “Speaker Config.” – “Front Height” is set to “None”, this sound mode cannot be selected.
z5 This sound mode can be selected when “Assign Mode” is set to “Front Height”.
Input signal types and formats
PCM DTS-HD DTS DOLBY DOLBY DIGITAL
Sound Mode NOTE DOLBY
ANALOG DTS-HD High DTS ES DTS ES DOLBY DOLBY DOLBY
PCM PCM DTS-HD DTS DTS DOLBY DOLBY DIGITAL EX
Resolution DSCRT MTRX DTS 96/24 DIGITAL EX DIGITAL DIGITAL
(multi ch) (2ch) Master Audio EXPRESS (5.1ch) TrueHD DIGITAL Plus (With no
Audio (With Flag) (With Flag) (With Flag) (5.1ch) (2ch)
Flag)
MULTI CH IN
MULTI CH IN F
MULTI CH IN + PLgx MOVIE z1z3 S
MULTI CH IN + PLgx MUSIC z1z2 S
MULTI CH IN + PLgz z4z5 S
MULTI CH IN + Dolby EX z1z2 S
MULTI CH IN 7.1 z1z2 F (7.1)
DIRECT
DIRECT S S S S S S S S S S S S S S S S
PURE DIRECT
PURE DIRECT S S S S S S S S S S S S S S S S
DSP SIMULATION
MULTI CH STEREO S S S S S S S S S S S S S S S S
VIRTUAL S S S S S S S S S S S S S S S S
STEREO
STEREO F S F S S S S S S S S S S S S S
z1 This sound mode can be selected when “Assign Mode” is set to “Surround Back”.
z2 If “Speaker Config.” – “Surr. Back” is set to “None”, this sound mode cannot be selected.
z3 If “Speaker Config.” – “Surr. Back” is set to “1spkr” or “None”, this sound mode cannot be selected.
80
z4 If “Speaker Config.” – “Front Height” is set to “None”, this sound mode cannot be selected.
z5 This sound mode can be selected when “Assign Mode” is set to “Front Height”.
TROUBLE SHOOTING
1. POWER
1.1. Power not turn on
Power not turn on.
When the power turned on, When the power turned on,
NO YES
does the ON/STANDBY does the ON/STANDBY
indicator on the front panel indicator on the front panel
flashing green? flashing red?
NO
YES
Is the fuse blown? Refer to 1.2.Fuse is blown.
NO
Is a DC 5V voltage output To troubleshooting

Is a DC 5V voltage being NO when the cord supplying the NO 6. SMPS.
YES
supplied from the SMPS B'D power from the SMPS B'D (Refer to 103
(CN4141) to the HDMI B'D? to the HDMI B'D (N3601) is page.)
unplugged?
YES YES
Check circuitry and parts from

Check µ-com periphery CX1 on the HDMI B'D to the
circuitry of HDMI B'D and µ-com power supply for damage
replace any defective parts. and shortcircuits, and replace
any defective parts.
About 10 seconds later, Are there any incomplete Check "3.5. Errors
YES NO
does the ON/STANDBY connections in the connectors checking mode".
indicator on the front panel connecting between the (Refer to 35
turn lighting green ? various circuit boards? page.)
NO YES
YES
Is the fuse blown? Refer to 1.2. Fuse is blown. Connect the connectors properly.
NO
Check voltage of N3405 (1- Check circuitry and parts from N3405 on
5PIN) of HDMI B'D while the 0V the HDMI B'D to the µ-com for damage
ON/STANDBY indicator is and shortcircuits, and replace any
flashing green. defective parts.
0.6V or -0.6V
Pull out connector (CP4001)

of SPK BD, and check "3.5.
Errors checking mode".
(Refer to 35 page.)
1.2. Fuse is blown
Fuse is blown
Check for short circuits in the Check for short circuits in

Check for leaks or short
rectifier diodes and circuitry of the power stabilizer unit's
circuits in the primary side
the secondary side rectifying regulator output terminal and
parts, and replace any
circuits, and replace any the ground, and replace any
defective parts.
defective parts. defective parts.
After repairing, also replace the fuse.
81
2. Analog video
MONITOR OUT (CVBS/COMPONENT) output NG
Input CVBS Input

Function : SAT COMPONENT
To A To B
HDMI OUT output NG
Input CVBS Input COMPONENT Input

Function : SAT Function : DVD HDMI
To troubleshooting
To C
3.2 HDMI/DVI.
82
A Input
CVBS
q
Is the power supply voltage
correctly output? NO
FRONT CONNECTOR B'D REGULATOR B'D flaw.
V+5V : CN4203-10pin
V-5V : CN4203-14pin
YES
w
Check on set value of each IC.
Is they the following voltage
values?
HDMI B'D NO
CN3402-6pin : H(5V) HDMI B'D flaw.
CN3402-7pin : L(0V)
CN3402-8pin : L(0V)
YES
e
Extend HDMI B'D using a jig.
r
Check connection of FRONT
V+5V : C4273 : + side CONNECTOR BD and AV BD.
V-5V : C4260 : - side
YES
t
Is the signal output from the NO Is the signal output to selector NO Check cable between main unit and
video amplifier? (IC4203)?
player or check player.
V : IC4201-7pin V : 3pin
YES YES
Check cable between main Check power supply voltage

unit and monitor or check of IC4201 and IC4203, and
monitor. surrounding circuitry soldering.
b Unless specified, AV B'D part.
83
B Input
COMPONENT
q
FRONT CONNECTOR B'D REGULATOR B'D flaw.
V+5V : CN4203-10pin
V-5V : CN4203-14pin
YES
w
Check on set value of each IC.
Is they the following voltage
values? NO
HDMI B'D HDMI B'D flaw.
N3402-4pin : H(5V)
N3402-5pin : H(5V)
N3402-9pin : H(5V)
YES
e
Extend HDMI B'D using a jig.
r
Check connection of FRONT
V+5V : C4273 : + side CONNECTOR BD and AV BD.
V-5V : C4260 : - side
YES
t
Is the signal output from the
Is the signal input to video amplifier?
video amplifier? NO NO
COMP-Y : C4353 +side Check cable between main unit and
COMP-Y : R4310
COMP-CB : C4354 +side player or check player.
COMP-CB : R4312
COMP-CR : C4355 +side
COMP-CR : R4314
YES
Check power supply voltage of

YES IC4202, and surrounding circuitry
soldering.
Check FRONT CONNECTOR

B'D flaw, and connection of
FRONT CONNECTOR B'D or
HDMI B'D and VIDEO B'D.
b Unless specified, AV B'D part.
84
C Input
CVBS/COMPONENT
q
Check the input signal to
VIDEO DECODER. Input CVBS : Check A-q - t
Is signal confirmed for the If no problems are found in the
following point? NO
checks above, check the connections
HDMI B'D between boards.
V : R1309
COMPONENT-Y : R1306 Input COPONENT : to B
COMPONENT-Cb : R1308
COMPONENT-Cr : R1307
YES
To troubleshooting 3.2. HDMI/

DVI.
85
86
CN3402-6pin CN3402-8pin
C1503
CN3402-7pin CN3402-9pin
CN3402-5pin
Q3620
C1310
R1309 C1309 R3669
C1311 R3676
N3405
C1302 R2016
C1303 C2002
C3753
C1304 -
N2001
R1307
-
2 NC
3 NC
C3750
R2101 R2001
C3755
1 DC_DET4
2 DC_DET3
3 ASO_DET
C1305
L3616
9 PSAVE
6 V_IN_A
7 V_IN_B
8 V_IN_C
R1308 CN3402-4pin
1 D/MGND
R1301 R1305
4 COMP_SW1
5 COMP_SW2
R1306 1 9 1
N3402
Detail B Detail A
(COMPONENT SIDE)
N3404 N3402 N3401
N3601 N3409
1
DIP C/S 13 1
7 9 1 1
7 H/P_L
6 H/P_GND
5 H/P_R
4 FRONT_RLY
3 C/S_RLY
2 SB_RLY
1 H/P_RLY
R2489 C2473 C2465 C3801
C3799 CLP1001
R2418 C2455 R2417
5 D5.2V
4 D5.2V
3 DGND
2 DGND
1 MAIN_PWR
R2470
R2453
R2454
R2445
R2435
R2469
13 D/MGND
12 VDICR
11 D/MGND
10 VDICB
9 D/MGND
8 VDIPY
7 D/MGND
6 CVBS
5 D/MGND
4 ETHERCVBS
3 D/MGND
2 NC
1 D/MGND
C2409 R2101 R2001 L3628 C3811 C3810 C3813
9 PSAVE
8 V_IN_C
7 V_IN_B
6 V_IN_A
5 COMP_SW2
4 COMP_SW1
3 NC
2 NC
1 D/MGND
R2415 C2454 R2416 L3627 N1301
C3755
C3758
R2471
C3750
R2472
R2456
R2455
R2446
R2436
C2433
A
R2408
R2490 C2474 C2466 N2001 L3626
5 TR_THERMAL
4 RADI_THERMAL
3 ASO_DET
2 DC_DET3
1 DC_DET4
C3818
C3745
23
C2024
C3730
C3748
R2019
R2020
R2120
C2033
C2030
C2407 C3791 L3609
C2002
R2025
R2024
U2402
C2050
R2026
R2028
R2027
R2030
C3753
R2016
C2046
C2482 L3610
C2041
C2408
R2017 R2048 R2119
R2409
N3405
U2406 C2464 R2006 R2049 10 1 C3605
R3611
C2487
C2434
C3802 C3812
N3403
C2481 R2007 C2004 R3605
C3623
U2001 C3726
N2401 C3216 C2006 R2003 C3629
C2421 C3211 R2002 R3630 C3603 C3761
C2485
R3254
R3234
C3633
ADSP21487KSWZ-3B
R2103 C3819
C2403
C3627
R3223 R3609
R3235
R3629
R3252
Q3220
R1358
R3224
R3253
R1312
Q3206
C3816
C3742
R2104 C3789
C3817
C3651
C2426
C3641
C3647
R2011 C2089 R2031 R3639

C2076 R2033 U3603
R3694
R3693
R3692
R3691
R3690
R3689
R3688
R3687
R2105
R2029 C2088 C3639
C2457
L3606
R2422
R2421
R2106 U3605
L3605
R2411 C2412
C2438 C2406
C3214
Q3205
C2401 R2107 R2035
L3622
L3621
R3236 C3621 -
R3633 R3634
C3653 R3641
C3210 C2013 L3617 C3659
R2501
C2489
Q3213 R3220 C2090 C3606 C3763
U2401
C2078 R3612 -
R2438
R3237
R2475
R2476
R2460
R2459
R2448
Q3212
C3630
C2418 R3239 C2080 L3618 R3636 C3636 CP1000
Q3204 R3635 C3820 NR1603 HDMI PCB
C1384
C3665
C2446
C1371
C1374
C1376
C1379
C1380
C1382
C2082 C1383
R1066
R1067
R3219 Q3211
C1168
C3654 7020-07201-020-0S
U2003
R2407
C2447
R3642 Q1011
Q3215
C3723 R1064
C3692
R2406 C3023 C2091 R1060
EN29LV160BB
C2437
R2410
C3725
C2402 U3606 R1061
FB1016
U2407
R2116
L3611
R2405
Pb Q1010 R1059
R3225 R3221 R3255

R3226 R3222
R3081 R3080
Q3209
R3227
R3229
R2115
R3232
C2450 C2451 R3062 C3025 C3024 L3612 D1003
R2491 R2492
C2475 C2476
C2467 C2468
U3004
C2449 L3623 R2255
R1576 R1577
R3241 R1054
C2427
C2428
L3403 D1002
C3703 C3694
C R3075 L3624 R2254
C3624 C3642
AD8195 IC1005
C3409 R3064 C2092 R2253 R1053

D1035 IC1005
R3073
R3074
R1052
R1056
R1055
R3625
R3070
R3063
C3020
R3061
C3415 C3022 R3626 C3601 C3765 R2252 R1051
R3060
C3019 R1057
R3069
R2042
R2437
R2500 R2112 R2114 C3649 C2233 IN ICT OP ADJ FI
C2425
C2424
C2422
2 40 R2043
R2265
R3607
C3783
R2499 C2106
C3675
C2107 R2108
N3408 R2040 C2094 C2095 R3637 C3631
R2109 R2110 Q3603
C3625
R2018
R3656
C2093 Q3602
U3601
C3736
R2111
1 39 C2225
R2021 R2022 R2256 C2224
L3401
C3688
Q3610
R2251
R2250
C3699
C2039 C2044 Q3601 R3650
C2104 R2044
R2277 R2046
L3613 R2257
C3405 C3418
R3651
L3601
X2001 R2258
L3602
C3674
R2278
C2404
C2486 C2488
C2222
C3737 R2245 R3655
R2231
L3614
R2276
U2206 R2259 C3764 R1637
R2228
R2229
R2230
R2232
R2244 JACK1000
R2233
C3009 C3637
C3787
L3402
L3404
C3619 TC74VHCT244AFT R2260
C2223
C3011
R3027
R3028
R3025
R3018
R3017
R3654
R2225
C3762
C3673
C2220
C3010
R3023
R3024
7
R3030
R3402 1 R2269 R3657 R3649
C3411 C3414
R3026
C3407 C3416
D2401
C3698
R3403 D3401 R3652 R1409 R1408 Q1606 Q3609
R2473
R2474
R2447
R2458
R2457
E
R2248
R2249
R2243
R2241
C2212
R2224
R2242
R2240
R2270
C2213
X2201
C3734
R3029
R3404 R2419 R2420 Q3004 R2246
C3695
C2214 C2221
R3068 C3012
R3065 R3031
C2456 R3668 Q3608 R1638
C1515
Q3604
Q3625
C3774
C2210
Q3621
C1032 NR1603 HDMI PCB LPP
Q3615
R3405
C3717 - L3603
R2247
N3406 R3663 R3675
R2271
R2272
R2273 N2201
Q3611
G
R2274
C3676
R3608
C3602
L2815 R2853 C3690 - L3604
C1316 C1315
C1318 C1321
C1320 C1319
C1317 C1314
R2808
7020-07201-020-0S
I O
R2860
C2803
L2814 R2852
U1304
Q3619
R2807
C3410
C1471
L2813 R2851 C3626
C3700
R2220
C1493
C2211
R2223
C2032
C2043
C3420
R2275
U2203
C3752
C1483 C1473
C3620
C3413 R3083 L2812 L2811 C3632 R1315
C2230
R1306
LC89058W-E
R3095
R3632
C3634
U3607
C2208
C1826
L1801
C3628
R1819
R1818
C1852
C3417
C1853
R3034
C2853 R2810
R1308
R2863 R2859
C3604 R1320
-
C1499
R3046
R2812
R2826
R2824
R2822
C2812
C3728
C3689
C3685
C2669
C3412 R3096 R3631
C3681 R3670
R3045 U2205 R3610 R1307 R1319 - C1716
C1807
C3419
R3206
R1302 R1310
C3202
R3043 C2828 C2218 C2811 R2261 C3652
-
D
C3638
C3408
R2858
C3686 C2209
U2207
R1309 R1314
R2809
R3042 C C2806 R2262
R2208
R2209
U2806
C3421 C3804 R3680 C3720
R2201
C2234 R1301 R1305
C2205
R3037
5 GND C2805
4 GND C2804
3 D+
2 D-
1 +5V
C1854
U2803 R2813
R2263 -
-
R1405
P
N
R
-
C3406 R2861
F
B
H
E
D
C
A
N2801 C2232
G
J
L
C2629
K
C2672
M
L2804 C2239 R2264
R3640
R3212 C3744
R1654
C3422
SAA7121H
C1486 R1347 R1682
L3607 R3638
R3100
C3207 C2238 R2266 C1305 C1833
R1642
U3604
C3401 R2818
R3051
C1490 R1348
U3602
R1406
C3014
R3628
C3712 L3608
R3076
L3616
C1802
C1696
R2268
C3768
L3615
R3213 C1387
C1801
C1605
L1602
R1693
R1694
C3402 R2819
1 2 3
C3672 L3619 R1684

-
C2826
F
B
R1417
R1414
R1415
E
D
C
A
R3012 R3210 - C1393 R1352
Q3617
R2617 R1807
Q2601
R2602
Q2602
X3001
R3627
R3059 U3002
C2627
Q3626
C2668
C1729
R3401 R1719
C3650
R1351
R3039
C3622 R1809 R1645
C3724
R3058
L
P
K
U
T
N
H
Y
V
R
M
G
AB
L3620
AC
AA
C2235
C2236
L2806
L2803 R2805
L2805 R2806
C1304 - C1508 R1679 R1646
R3660
R1667
C3015 C3016
R3662
R2705
R2701
R1811
R2704
C2825 Q3614
R3666
R3673
R3057 C2810 C1303 R1632
N2602 R2267 Q3607
AC 1
R2614
R1813
O I
7 8 9
R3050
R3682 C1302 AB
R1683 -
U3201
C2814 1 6 AA R1817 3
R1668
R3647
C1311
C3640
G
R3683 C2813 R3676 Y 4 R1695
C2678 C3697 R1815 -
R2635
R2721
R2607 R2707
C3018
R3669 C1309 W U1802 5
C2809
U3608
C3806 R1666
B
C3792 C1310 V
K4T51163QJ R1681 6 -
C3017
C2625
Q3620 U 7
C3203
C3204
C2824
R2845
L2601
C2832
Q3606
R2846
T
R 8 -
R1689 9
-
C3727
C1034 P C1312 R1338 10
R3648
Q3627
C2624
C3701
N R1403
N3407 C1517 11 -
R2834
R2831
M 12
C2827
C3696 R1357 R1687
R2849
C2626 R1404 -
R1360
R3659
R3661
L 13
C1503
C1509
C2833
R3681
R1625
U1601
Q3613
X1601
K
R3665 R2613 R1344 14
C1510
R2711
J
R1686
C3797 R3679
D3601 R3678 R2608 - U1001 H - U1603
ADV8002-4
R3672 17
R3658 R3653
ADV3002BSTZ G
L1617 - U1801
18
R2709 R2713
F
C3795 C1512 K4T51163QJ
J
L2808
L
P
K
F
B
N
H
E
R
D
C
A
C2822
M
G
E 19
U2603
R2609
X1301
Q3612
R1652
R1651
R1349 C1500
C1511 D - R1678 20 -
C1834
Q3007
C 21
C1702 C1703
R2213 R1353 B R1626 R1633 L1607

R2611 R1806
R3677 D3602
C3677
R2214
A
1 2 3
Q3008
D R2212 C1504 C1505 C1506 R1673
23
22
R3019
R1808 C3822
U2601 C2823
R2603 C1688
9
8
7
6
5
4
3
2
1
R3085
C1507
R3087
11
21
20
19
18
17
16
15
14
13
12
10
R1650
R1649
R2610 R2215 C1501 C1712 R1643 R1624
C3790 U2802 R2717 R2646 R2219 C1502 R1810 R1677 C1713 C1686 C3756
R3033 N3001 C3788 R2643 R2644 R3209 R3208 A U1302 R1812 C1640 C1687 L1615
R3032 R2218 C1378 C1375 ADV7850 R1623 R1644
L2809
L2810
7 8 9
R2720 R1410 R1411 R1814 R1676
R2216
R2649 R2648
N1601
B C3205 R3211 L1608 C3823
R3207
L1619
1 7 R2629 R3695 R1816

C1707
R3090
R3097
R3094
R3092
R3088
R3086
R3084
R3099
C2656
C2821
C2820
R3098
R3021 U2602 R3696 R1675
C1363
E R1311 C1808
R3020
C2816
A
R2802
R3022 DM860A - R3697 R1820 C3767
C1372
R1316 C1637
L1618
L1616
L1610
L1606
R2830 R2829 R2833 R2832
C1360
C1658 C1714
-
-
C1368
C2817 -
R2620
R3698 D1301 R1304
L2807
C2807 C2808 L1605 L1613
R2615
R3066 R2211
-
-
R3699 R1328 D1302
-
R3701
N2601
R2631 C2655
R2205 C2215 C1366
C3008
C2818
C2819
R3700 D1303 R1330
L2801
R2632
R2626
R2622
R2630
C1652
R2627
R2628
C2604
R2624
R2616
C3702
R2803
L2802
1 R2207 1 C1719
C3007
11 R2236
U3001
R2623
C1365 R3702 D1304 R1329
R2625
7
N3002
C3708 B D2802 D2801 D2804 D2803 A L1609
D3005
R2210 U2204 R2237
R3010
R2650
R1700
C2659
C2207 R1332 R1317 R1699
R2234
R2601 U1604
R2239
R2206 -
OUT G VCC
-
R2647
R2639
R2645
R3204
R2640
C2206 Q1301 D1307 D1308 D1311 D1312
-
Z3001 C2202 R2204 Q3202 R3203 C3201 - R1701 D1615

R2652 R2651 R1008
R1004
R1016
R1012
R1007
R3067 Q3005
R1011
C2201
R1003
R1015
D1305 D1306 D1309 D1310
L1622
R1729
R1006
R1014
R1010
L1625
L1624
L1623
R1731
R1002
R1732
R1730
D3201 R1037 R1043
R1039
R2221
R1040
Q3003
D3001
R1041
R2801
D2201
R1724
R1722
Q3006 R3079 R1038
R1720
R1715
R2203 R1044
Q1302
D2202 K2201 R1042 N1003
K2202 N1004
R2202
U2201
C2204
C3404
N1002 R1653 D1609 D1610
Q1006
D1605 D1606
R3001
C3423 -
R3002
D3004 C2203
C1718
C3403 D1611 D1603 D1604 D1607 D1608
R1647
C3693
24
R1717
4
Q1001
N2802
K3002 D3006
C3
Q1005
R1711
R1713
R1709
R1705
R1707
N1001
R1721
R1723
D1601 R1641
Q1003 Q1007
R3011
Q1004 Q1008
Q3002 - D1602 R1648
C3005
C3006
-
R1725
- -
R3215
R3217
R3216
C3001
-
R3003
Q3001
R3004
R3005
D3002
D3003
-
C3704
C3003
C3002
U2202
C3004
R3009
N3201 N1302
R1001 -
R1005
C1705
C1706
Q1002
R1013
R1009
N1602
R1726
K3001 -
HDMI test point
CB
COMP OUT
JK4208
Y
CR
CN4201
IC4202
C4268 NJM2586M C4254
CB
JK4207
C4253
VIDEO test point
Y
CN4204 C4267
R4314
CR
LIMIT+
LIMIT-
H/PR
NUTE_7V
RLGND
RLY_SB
RLY_H/P
RL+B
RL+B
H/PL
RLY_F
RLY_S/C
H/PGND
1.D/MGND C4255
2.NC C4266
R4312
R4311 R4313
3.D/MGND
4.ETHERCVBS CB
5.D/MGND R4318 C4251
JK4206
6.CVBS
7.D/MGND R4331 C4250 CR
8.VDIPY R4330 Y
9.D/MGND R4329
10.VDICB R4328 C4265
R4327
11.D/MGND R4326
12.VDICR C4274 IC4203
TC4051BFTC4262
R4319
13.D/MGND C4269
C4252
B1
C4273 R4315
JK4205
R4316
C4259 IC4201 R4317
BD7628 R4308
C4264
C4260
Q4200
Q4201 R4248
Q4202
R4235
C4232
JK4204
CN4203 R4239
1.D/MGND Q4203
R4254
R4252
2.COMP_GDET R4240 Q4205 R4273Q4210

3.CVBS_DET
R4219
R4221
R4220
R4223
R4222
R4225
R4224
R4354
R4353
R4218
4.COMPONENT SW1 R4249
C4229
5.COMPONENT SW2
6.V INA R4272
C4228
7.V INB
8.V INC Q4206 R4274
R4352
R4351
R4214
R4213
9.PSAVE C4230
JK4203
C4236
10.V+5V
11.V+5V 1
12.VAGND C4233 R4275 Q4211
75
D4207
D4208
5
D4206
13.VAGND
B2
87
R4255
ZD4200
R4253
14.V-5V
MTZ3.6B
15.V-5V 10 70
C4231 R4277
Q4207
C4237
65
IC420015
R2A15218FP
JK4202
C4218 C4217 20 60
R4276 Q4212
R4256
R4257
25 55
C4216 C4291
R4206
R4215
C4238
C4212
C4293
R4203
R4202
31
C4215 50
C4289
C4219
C4222
C4225
C4210
C4227
CN4200 C4214
C4292
1.RLY_H/P C4211
2.RLY_SB
3.RLY_S/C
4.RLY_F
5.H/P_R C4221 C4290
6.H/P_GND C4213 C4294
C4207
C4208
7.H/P_L
R4264 R4236 R4241

R4237 R4242
R4265 R4238 R4243
C4209
C4220
AUDIO_IN
R4260
JK4200
R4262
20.DAGND
R4261
11.TU_SCLK/SCL
10.TU_SDIO/SDA
1.NC
5.MX_R
4.AGND
3.MX_L
2.MVOL_CLK
1.MVOL_DATA
9.TU_SEN
8.TU_RST/ST
7.TU_GPIO2/TUNED
6.AGND
7.A-7V
6.A-7V
5.A+7V
4.A+7V
2.PRE_MUTE
13.RLYGND
12.RLY+B
11.TU+5V
10.M/DGND
9.RET GND
8.RET GND
23.USB_L
22.USB_RC4223
21.DAGND
19.A/D_L
18.DAGND
17.A/D_R C4224
16.DAGND
15.DA_FL
14.DA_FR
13.DAGND
12.DA_C C4226
11.DA_SW
10.DAGND
9.DA_SL
8.DA_SR
7.DAGND
5.DA_SBR
4.RETGND
3.RETGND
2.MIC_IN
1.MICGND
6.DA_SBL
R4259
R4263
CP4201 3.MUTE3.3V
CP4202
CP4200
FL D
N CN4202
AGSL
D
N
D4218
D4217
D4219
D4220
D4222
D4223
D4221
G
A C
D
R4283
R4291
R4287
N
A G PACK4200
C4206
BD4200
D4209
D4213
D4214
D4215
D4211
D4210
D4212
SR
AGND
Q4209
Q4208
FR
AGND
C4235
SBL
AGND
SBR
Q4213
C4281
Q4204
C4242 C4288 C4287

C4283 C4282 C4284
L4200 L4201
Detail B1
Y
C4253
JK4206
C4250
C4252
COMP OUT JK4207 JK4204
R4317
R4316
R4315
JK4208
C4254
C4251
C4253
C4255
C4254
C4255
TC4051BFTC4262
IC4203
R4308
C4265
IC4203 R4319 C4264
NJM2586M
C4269
IC4202
IC4202
IC4201
R4331
R4330
R4329
R4328
R4327
R4326
C4267
C4266
R4318
BD7628
C4268
C4259 IC4201
C4274
R4248
C4260
Q4202
R4314
R4311 R4313
R4312
C4273
Q4201
C4273
C4260
CN4201
LIMIT-
R4235
LIMIT+
Q4200
NUTE_7V
RLGND
Detail B2
CN4203
1.D/MGND
2.COMP_GDET
3.CVBS_DET
4.COMPONENT SW1
5.COMPONENT SW2
6.V INA
7.V INB
CN4203 - 10pin 8.V INC
9.PSAVE
10.V+5V
11.V+5V
CN4203 - 14pin 12.VAGND
13.VAGND
14.V-5V
15.V-5V
88
3. HDMI/DVI
3.1. No picture or sound is output (HDMI to HDMI)
No picture or sound is output.
Check HDMI/DVI cable connection.
NO
There may be the a problem with the HDMI/
(1) Is the HDMI/DVI cable properly connected?
DVI cable. Check connection.
YES
YES
(2) Are you using an HDMI/DVI selector, repeater or a device for Disconnect everything and connect only the
improving picture quality? HDMI/DVI cable to check
NO
NO
Use a certified HDMI cable (with the HDMI
(3) Are you using a certified HDMI cable (with the HDMI stamp)?
stamp).
YES
NO Replace the HDMI/DVI cable with one that

(4) Are you using an HDMI/DVI cable less than 5 meters in length? is less than 5 meters in length (2 meters
recommended) to check.
YES
YES
(5) Are the picture and sound output when another HDMI/DVI cable
The HDMI/DVI cable is defective.
is used?
NO
Check BD/DVD player.
NO
Check the HDMI output setting, referring to
(6) Is the BD/DVD player's HDMI output setting correct?
the BD/DVD player operating instructions.
YES
(7) When you use a Marantz BD/DVD player, is the fluorescent

display tube's "HDMI" indicator lit? If you use a non-Marantz BD/
DVD player, proceed to "YES".
YES
(8)
Are the picture and sound output YES Set the BD/DVD player output resolution to
NO when the BD/DVD player's
a resolution with which the TV is compatible.
resolution is changed?
NO
(9) Is sound output from the set's speaker terminals when the TV's YES The BD/DVD player may not be compatible
power is turned off or the connection cable between the TV and with HDCP repeaters. Ask the BD/DVD
the set is disconnected? player's manufacturer.
NO
(10) Are the picture and sound YES

output when a different BD/ The BD/DVD player is defective.
DVD player is used?
NO
89
Check TV
NO Use an HDCP-compatible TV. PC TVs cannot

(11) Is the TV HDCP-compatible?
be used.
YES
If the TV is not compatible with resolutions of

NO
(12) Is the TV compatible with resolutions of 1080P? 1080P, no picture will be output, even if the
BD/DVD player resolution is set to 1080P.
YES
NO
Check the TV's input setting, referring to the
(13) Is the TV's input set to HDMI?
TV's operating instructions.
YES
NO
(14) Are the picture and sound output when a different TV is used? The TV is defective.
YES
Check set (NR1603)
NO
The HDMI connector is defective.
Is a contact part of HDMI connector normal? (Refer to 92 page (*1).)
Replace the new HDMI connector.
YES
YES Malfunction of the HDMI connector.

(15) Is any PIN of the HDMI connector bent or is dust adhering to the
(If dust is adhering, remove the dust and
connector?
perform the troubleshooting again from (1).)
NO
NO
Check the set's input setting, referring to the
(16) Is the set's input set to HDMI?
set's operating instructions.
YES
The set does not recognize the TV.

(17) Is TP [HPD_OUT] set to the "H"(3V-5V)?
The pattern and circuit from the HDMI
With the TV connected,check the voltage of the IC on the side on NO
connector (N1602) to the U1601 are
which the TV is connected.
defective, or HDMI output circuitry is defective
Is communication waveform confirmed in TP[DDCDATA-OUT/
(U1601 and surrounding circuitry).
DDCCLK_OUT]?
Replace the U1601.
Is D1604/D1605/D1606/D1607/D1608/D1609/D1610 terminated
by the TMDS signal of 3.3V and is the signal output?
YES
The BD/DVD player does not recognize the

connection with the set.
(19)
Is HDMI connector (N1001/N1002/N1003/N1004 :
(18) TP[HPD]) set to "H"(3V-5V)? The pattern and circuit
When using a Marantz BD/ With the BD/DVD player connected, Check from the HDMI connector
NO NO
DVD player, is the FL display's voltage of the HDMI connector (N1001/N1002/ (N1001/N1002/N1003/
"HDMI" indicator lit? N1003/N1004 : TP[D_5V]) for the input on the N1004) to the IC (U1001
If using a non-Marantz BD/ side on which the BD/DVD player is connected. or U1601) are defective.
DVD player, proceed to "NO". Is communication waveform confirmed in TP[SCL/ Replace the IC9.
SDA] around each HDMI connector ?
Is TMDS line of HDMI connector (N1001/N1002/
N1003/N1004) terminated by the TMDS signal of
3.3V and is the signal output?
YES YES
90
(20) YES U1601(ADV8002) and surrounding circuitry
VIDEO CONVERT : Is the picture output when it is set to off?
are defective.
(After item (23) : To be "VIDEO CONVERT:OFF" setting.)
NO
The HDMI input circuitry is defective.

(U1001 or U1601 and surrounding circuitry)
Replace the U1601.
Check operation of each device.

(AMP source : BD / Video input of player : 480P / Connect the TV.)
Check operation of U1001(ADV3002).
(21) Check power supply. NO

Are 5V or 3.3V supplied to U1001 (each power supply pin)? The power supply circuitry is defective.
Refer to [Detail C] of the substrate for test point.
YES
(22) Check RESET. NO

Is RESET waveform confirmed in U1001 (97pin), when the power is turned The RESET circuitry or U1001 is defective.
on?(If the waveform is not the reference waveform, proceed to NO.)
YES
(23) Check Control signal (I2C). NO The pattern is defective of the HSCL/HSDA
Is waveform confirmed in TP[HSCL/HSDA], when the power is turned on? (If
line.
the waveform is not the reference waveform, proceed to NO.)
YES
(24) Check output signal.

NO
Is TMDS waveform confirmed in 25pin/26pin/28pin/29pin/31pin/32pin/34pin/35pin.
Is communication waveform of DDC_SCL/DDC_SDA confirmed in 67pin/68pin? The U1001 is defective.
(If the waveform is not the reference waveform, proceed to NO.)
YES
Check operation of U1302(ADV7850)

Are 1.8V or 3.3V supplied to IC9(each power supply pin)? The power supply circuitry is defective.
Refer to [Detail D] of the substrate for test point.
YES
(26) Check xtal oscillator. NO The X1301 or U1302 is defective.

Is oscillation of X1301(27MHz) transmitted? Replace the new parts.
YES
91
(27) Check RESET.
NO The RESET circuitry or U1302 is defective.
Is RESET waveform confirmed in TP (7850RESET), when the power is turned
Replace the new parts.
on? (If not reference waveform, proceed to "NO".)
YES
Check operation of U1601(ADV8002)

Are 1.8V supplied to L3622? The power supply circuitry is defective.
Are 3.3V supplied to Q3610 1pin?
YES
(29) Check xtal oscillator. NO

The X1601 or U1601 is defective.
Is oscillation of X1601(27MHz) transmitted?
YES
(30) Check RESET. NO

The RESET circuitry or U1601 is defective.
Is RESET waveform confirmed in TP[8002 RESET], when power is turned on?
(If not reference waveform, proceed to "NO".)
YES
The pattern and circuit from the HDMI connector (N1602) to the IC(U1601) is
defective, or HDMI output circuitry is defective.
(*1) Abnormal sample of HDMI connector : The internal terminal has bent.
92
3.2. HDMI test point and waveforms
N3404 N3402 N3401
4 FRONT_RLY
N3601 N3409
6 H/P_GND
3 C/S_RLY
1 H/P_RLY
2 SB_RLY
DIP C/S
5 H/P_R
7 H/P_L
1 1 13 1
7 9
4 ETHERCVBS
1
1 MAIN_PWR
C3801
5 COMP_SW2
4 COMP_SW1
13 D/MGND
C2465
11 D/MGND
R2489 C2473
4 RADI_THERMAL
9 D/MGND
7 D/MGND
5 D/MGND
3 D/MGND
1 D/MGND
C3799 CLP1001
12 VDICR
10 VDICB
3 DGND
2 DGND
5 D5.2V
4 D5.2V
5 TR_THERMAL
8 VDIPY
1 D/MGND
6 CVBS
R2418 C2455 R2417
R2470
R2453
R2454
R2445
R2435
R2469
8 V_IN_C
7 V_IN_B
6 V_IN_A
9 PSAVE
2 NC
3 ASO_DET
2 DC_DET3
1 DC_DET4
C3755
R2101 R2001 L3628
R2471
C3750
C2409
R2472
R2456
R2455
R2446
R2436
C3811 C3810 C3813
3 NC
2 NC
C2433
R2408
R2415 C2454 R2416 C3758 L3627 N1301
C3745
L3626
C2024
C3730
C3748
R2490 C2474 C2466
R2019
N2001
R2020
R2120
C2033
C2030
23 C3818
ADSP21487KSWZ-3B
C2407 C3791
R2025
R2024
U2402
C2050
R2026
R2028
R2027
U2001 C3726
R2030
C3753
L3609
C2046
C2002
C2041
C2408
R2409
R2016 L3610
N3405
C2487 C2482 R2017 R2048 R2119
C2434
R2006 R2049 C3605
N3403
U2406 C2464 10 1
C3623
C3802 C3812 R3611
C2481 R2007 C2004 R3605
N2401 R2003
C2485
C2006 C3629
R3234
C3216
C2403
C3627
C2421 R2002 R3630
R3235
C3603 C3761
R3252
C3211
R1358
R3224
Q3206
R3253
R1312
R3254
C3816
C3742
C3633
C2438 C2406
C3817
R3223 R2103 R3629 R3609 C3819
C2426
Q3220
R2411 C2412
R2104
C3641
C3647
C3789 C3651
R3633 R3634
C3653 R3641
R2011 C2089 R2031 R3639
R3694
R3693
R3692
R3691
R3690
R3689
R3688
R3687
C2076 R2033 U3603
C2457
R2422
R2421
L3606
R2105
L3605
Q3205
R2106 R2029 C2088 C3639 U3605
L3622
L3621
C2401 C3214 R2107 R2035 C3621
R2501
R3236
C2489
C2013 -
C3210 L3617 C3659
U2401
R3225 R3221 R3255

R2438
R3237
R2475
R2476
R2460
R2459
R2448
Q3212
Q3213 R3220 C2090 C3606 C3763
C3630
C2078 R3612 -
C1384
C2446
L3618 R3636 C3636
C1371
C1374
C1376
C1379
C1380
C1382
C1383
C2418 R3239 CP1000
EN29LV160BB
Q3204 C2080 C3820 NR1603 HDMI PCB
R1066
R1067
R3635 C3665
C1168
C2082
U2003
R3219 Q3211 7020-07201-020-0S
C2447
R3226 R3222
C3654
Q3215
C3692
C2475 C2476
C2467 C2468
R2491 R2492
R2407
Pb
C3723 R3642
C2437
Q1011
R2410
C3725 R1064
C3703 C3694
R2406 C3023 C2091
R1576 R1577
AD8195 IC1005
FB1016
U2407
R1060
L3611
D1035 IC1005
C2402 U3606 R1061
Q3209
R3229
R3232
R2405 R3081 R3080 R2116 Q1010 R1059
U3004
R3227 R2115
C2427
C2428
C2450 C2451 R3062 C3025 C3024 L3612 D1003

C2449 R3241 L3623 R2255 R1054 D1002
L3403 R3075 R2254
R3073
C
R3074
L3624 C3624 C3642
R3070
R3063
C3020
R3061
R1052
R1056
R1055
R3060
R3064 C2092 R2253
R3069
C3409 R1053
R2437
C3415 C3019 C3022 R2042 R3625 R3626 C3601 C3765 R2252

C2425
R1051
C2424
C2422
R1057
IN ICT OP ADJ FI
R2265
R3607
C3783
R2500 R2112 R2114 C3649
C3675
2 40 R2043 C2233
D
R2499
R2277 R2046
C2107 C2106
C2104 R2044
R2108
C3625
R2018
C2095
R3656
N3408 R3637 C3631
C3405 C3418
R2040 C2094 R2109 R2110
C3736
Q3603
R2111
C2093 Q3602
1 39 C2225 U3601
L3401
Q3610
R2251
R2250
R2021 R2022
C3699
R2256 C2224 C3688
C2039 C2044 Q3601 R3650
L3601
C3674
R2278
C3407 C3416
C2404
L3602
R2257
C3411 C3414
C2222
R2231
L3613
R2276
X2001 R3651
R2228
R2258
R2229
R2230
R2232
C2486
R2233
C3737 C2488 R2245 R3655
C3787
L3614
L3402
L3404
C2223
U2206 C3764 R1637
R3027
R3028
R3025
R2259
R3018
R3017 JACK1000
C2221
R2225
C3762
R2244
C2220
C3009
C3012
C3637
R3023
R3024
C3619
R3030
R3031
C3011 TC74VHCT244AFT R2260 R3654
D2401
C3010 C3673
C3698
R3402 1 7 R2269 R3649
R2473
R2474
R2447
R2458
R3657
R2457
R3026
R2248
R2249
R2243
R2241
C2212
R2224
R2242
R2240
R2270
C2213
Q1606
X2201
R3403
R3029
D3401 R3652 R1409 R1408 Q3609

E
R2273 N2201
C3695
C3734
C2214
R3404
R3068
R2419 R2420 R3065
Q3004 R2246
NR1603 HDMI PCB LPP
C1320 C1319
C1316 C1315
C1317 C1314
C1318 C1321
C1515
Q3625
C3774
Q3621
Q3615
C2456 R3668 Q3604 Q3608 R1638
R2247
R3405 C2210 C1032
R2271
R2272
Q3611
C3717 L3603
R2274
C3676
-
R3608
C3602
N3406 R3663 R3675
7020-07201-020-0S
R2808
R2863 R2859
R2860
C2853 R2810
C2803
L2815 R2853
U1304
L3604
LC89058W-E
-
Q3619
C3690
I O
R2807
G
C1471
C3681 R3670
L2814 R2852
C3700
C1493
R2223
C2211
C2032
C2043
R2275
U2203
C3752
C3410
C2209
C3620
L2813 R2851 R2220 C3626
C2230
C3420
R3095
R3632
C3634
U3607
C1483
C1826
C3628
C1473
L1801
R1819
R1818
C1852
L2812 L2811
C1853
C3413 R3083 C3632
C1499
R1306 R1315
R2813
U2803 R2812
R2826
R2824
R2822
C2812
C3728
5 GND C2805
4 GND C2804
C3689
C3685
C2669
C3417 R3034 C2208 C3604 R1308 R1320

R3046
C1807
R3206
C3202
C3412 R3096 R3631 R1307 R1319
L3607 R3638
R3045 - C1716
-
U2205
C3638
R2858
C3686
R3610
U2207
R2809
C3419 C2828 C2218 C2811 C3652 R1302 R1310
D R2261
R2208
R2209
U2806
R3043
R2201
C3408
SAA7121H
C E
C2205
R3042 C R2262 R1309 R1314
1 +5V
C3421 C3804 C2806

-
3 D+
R3680 R1301 R1305 C3720
C2629
C2234
2 D-
C2672
R3037
R3640
R2263 - C1854
R1654
R1405
R3100
C3406 N2801 L2804 R2861 C2232 R2264
R1642
C2239
U3604
R3212
F
R3051
U3602
C1486 R1347
L2805 R2806
C3744
L2803 R2805
-
N
R
P
C3014
R3628
C3422 R1682
-
C1833
H
G
R3076
D
C
B
C1802
E
F
C1696
C3768
M
C3015 C3016
L3616
K
L
J
C1305
L3615
C1801
C1605
R2266
R1693
R1694
C2238
L1602
C3401 C3207 R2818 C1490 R1348 R1406
C2826
C3712
R1417
R1414
R1415
- R2268 L3608
Q3617
C3402 R3213 R2819 C1387
Q2601
1 2 3
Q2602
R2602
R3627
X3001
C2627
C2668
C3672 L3619 R1684
C1729
C3650
R3039
R3012 R3210 - C1393 R1352
C3724
R3059 U3002 R2617 Q3626 R1807
C2235
C2236
D
C
B
R2607 R2707
E
F
A
L2806
-
R3401 R1719
R3660
R1351
R1667
R3662
C3622 R1809 R1645
R2705
R2701
R2704
R3666
R3673
R3058 L3620 C1304 - C1508 R1679 R1646
R2614
AC
AB
AA
R3057 C2825 Q3614 R1811
M
R3050
H
R
P
G
Y
V
L
T
J
C2810 C1303 R1632
U3201
N2602
7 8 9
R2267
R1668
Q3607 R1813
R3647
C3640
AC 1 O I
R3682 C2814 1 C1302 R1683 2
-
R1817
R2635
R2721
AB
C3018
6 R3676 C1311
C2809
U3608
AA 3 G
R3683 C2813 C2678 C3697 R3669 C1309
Y
R1815 U1802
4 R1695 -
C3017
C2625
C3203
C3204
C3806 R1666 5
R2845
C2832
W
R2846
C1310 R1681 -
L2601
C3792 V
K4T51163QJ 6
C2824 Q3606 Q3620 U 7
C3727
-
C3797 R3679
R3648
Q3627
C3701
T
R1689
R3653
9
C1034 C1312 R1338 -
R2834
R2831
R
C2827
C2624 10
R2849
R1360
P
N3407 R1403
R3659
-
R3661
C1517
R2709 R2713
C1503
C2833
ADV8002-4
11
R1625
U1601
Q3613
N
X1601
C2626 C3696 R1404 R1357 R1687 12
-
R1349 C1500
M
R3681 R2711 C1509 13
-
L
R3665 R2613 C1510 R1344 14
C1702 C1703
K
R1686
R3658
D3601 R3678 R2608 - U1001
J
- U1603
R3677 D3602
R3672 ADV3002BSTZ
H
U1801
U2601 C2823
C2822
L2808
L1617 - 17
U2603
X1301
R1652
R1651
G
C3795 C1512 K4T51163QJ 18
C1834
F
Q3007
R2609 Q3612 19
E
C1511 - R1678 -
M
N
H
R
P
D
C
B
E
F
A
L
J
D 20
C3677
R2214
Q3008
21
R1626
C
R2213 R1353 R1633
R3019
L1607
1 2 3
D R2611 R1806
B
R3085
R3087
R1650
R1649
R2212 C1504 C1505 C1506 R1673
A
R2603 C1507 R1808 C1688 C3822
23
22
R2610 R2215 C1501 C1712 R1643 R1624
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
C3790 U2802 R2717 R2646 C1502 R1810 R1677 C1713
R3033 R2643 R2644 R2219 U1302 C1686 C1687 L1615 C3756
L2809
N3001 C3788 R3209 R3208 A R1812 C1640
R2216
N1601
C1378 C1375 ADV7850 R1623 R1644
7 8 9
R2218
R3207
R3032 L2810
L1619
R2720 R2649 R2648 B C3205 R3211 R1410 R1411 R1814 R1676
C1707
L1608
R3090
R3097
R3094
R3092
R3088
R3086
R3084
R3099
C2656
C2821
C2820
R3098
R2631 C2655
1 7 R1816 C3823
C1363
R2629 R3695
C2816
R3020
R2802
R3021 E U2602
C1372
A R3696 R1311 R1675
L1618
L1616
L1610
L1606
C1360
C1808 R1820
C1368
R3022 -
R2620
DM860A R3697 R1316 C3767

L2807
R2830 R2829 R2833 R2832 C1637

R2615
C2817 - R3698 D1301 R1304 C1658 C1714
N2601
B
C2807 C2808 L1605 L1613
C3008
C2818
C2819
R2211
-
-
OUT G VCC
R3066
R2632
R2626
R2622
R2630
R2627
R3699
R2628
R1328 D1302
C2604
R2624
L2801
R2616
C3702
R2803
R3701
L2802
C1366
C3007
U3001
R2205
A
R2623
C2215
R2625
D1303 R1330
R3067 Q3005
R3700
-
-
N3002
C1652
-
1 11 R2207 R2236 1 C1365 R3702 C1719
D3005
R3010
D1304 R1329
R2650
R1700
C2659
B 7
R2234
R2239
C3708 U2204 R2237 D2802 D2801 D2804 D2803 A L1609

R2647
R2210
R2639
R2645
R3204
R2640
C2207 R2206 R2601 - - R1332 R1317 U1604 R1699
R1004
R1016
R1012
C2206 Q1301
R1003
R1015
R1011
D1307 D1308 D1311 D1312
R1729
R1006
R1014
R1010
C2202
R1731
R1002
R1732
R1730
L1622
C3201
L1625
L1624
L1623
Z3001 R2204 Q3202 R3203 D1615
R1039
R2652 R2651
R1040
- R1701
D3001
R1007 R1008
R2801
C2201 D1305 D1306 D1309 D1310
-
R1724
R1722
R1720
R1043
R1715
D3201 R1037
Q1302
Q3003 R2221 R1041
Q3006 R3079 D2201 R2203 R1038
K3002 D3006
R2202
R1044
U2201
C2204
C3404
Q1006
R3001
R1042
R3002
C1718
D2202
Q1004 Q1008
Q1003 Q1007
K2201 K2202 N1002 N1003 N1004 R1653 D1605 D1606 D1609 D1610
R1647
C3423 -
C3693
D3004 C2203 D1611

C3403 D1603 D1604 D1607 D1608
Q1001
N2802
Q1005
R1713
R1709
R1705
R1707
R1711
N1001
R1721
R1723
R1717
R3011
4
42
D1601 R1641
C3005
C3006
C3
Q3002 - D1602 R1648

R3215
R3217
R3216
C3001
R1725
R3003
R1001 -
Q3001
R3004
-
R3005
D3002
-
D3003
-
C3704
C3003
C3002
U2202
C3004
R3009
Q1002
R1005
C1705
C1706
R1013
R1009
R1726
N3201 -
K3001 N1302 - N1602
(COMPONENT SIDE)
Detail A Detail B
D1605
-
-
N2601
D1606
-
-
-
-
-
C1719 1
R1700
7
R3204
R1699 R2601 - -
R1006
R1014
R1010
R1002
Q3202 R3203 C3201
R1732
R1039
L1625
D1615
R1040
-
-
D3201 R1037
D1610 R1038
Q1006
HPD-OUT
Q1003 Q1007
N1002
D1603
Q1001
D1609
Q1005
N1001
R1641
R1648
R1725
R1001 -
-
-
U2202
Q1002
R1005
R1013
R1009
C1705
C1706
R1726
N1602
D1608
DDCDATA-OUT D1607
DDCCLK-IN1 +5V-IN1
DDCCLK-OUT D1604
HPD-IN1 DDCDATA-IN1
D1603
93
Detail C Detail D
C3676
R3608
C3602
C3675
C1318
C1320
- L3604
R3656
C3620
C3626 Q3603
R3632
C3634
C3628
C3632
Q3610
R1306
C3699
C3604 R1308 C3688
R1307 Q3601 R3650
L3607 R3638
C3638
R3610 R1302 R3651
C3787
R1309 C3764 R1637
C3762
R1301
R3640
R3654 C3673
R3649
U3604
U3602
R3628
L3616
L3615
Q1606
L3608
C3695
R3627
C3650
C1515
C3774
Q3626 Q3608 R1638
R3660
R3662
C3622
C1304
Q3614
Q3607
C1303 1.8V C1032
R3647
C3640
C1302
U1304
I O
G
R3676 C1311
C1471
C1493
C3697 R3669 C1309
C3792 C1310
Q3606 Q3620 C1483 C1473
C1499
R3648
R3653
C1034
R3659
R3661
HSCL
Q3613
C3696
R1349 C1500
C1509
C1510 3.3V
R3658
- U1001
ADV3002BSTZ
X1301
C1512
C1511
R1353 HSDA
3002 RESET C1504 C1505 C1506
C1507
A C1502
R3090
R3097
R3094
R3092
R3088
R3086
R3084
R3098
R2830
-
-
-
-
-
CK- D2802 D2+

R3204
CK+ D2-
D1+
D0- D1-
U1 [ADV3002] Power pin
D0+ 5V : 64pin
3.3V : 9pin / 18pin / 33pin / 43pin /52pin
Detail E Detail F
-
C1716
-
C1486 R1347 C3720
C1490 R1348
R1417
R1414
R1415
-
-
C1387
C1802
C1801
C1605
R1693
R1694
L1602
C1393 R1352
R1351
C1729
C1508
D
C
B
E
F
R1719 R1645
AC
R1646
AC
AB
AA
W
M
U
H
R
P
G
Y
V
L
T
R1632
AB
R1668
1
AA
2
-
Y
3
W
U
V
4
5
R1695 -
T
6 -
7
R
8
R1360
P
N R1403 9
R1404 10
M
-
ADV8002-4
11
R1625
L
U1601
X1601
J
K
R1344 12
13
14
H
L1617
R1652
R1651
G
F
-
17
E
18
D
19
C
B
20 -
21
R1626
A
R1633
23
22
C1501
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
U1302 C1688
C1712 R1643 R1624
N1601
C1378 C1375 ADV7850 C1713

R1410 R1411 C1640 C1686 C1687 L1615
R1623 R1644
C1363
R3695
C1372
C1707
R3696 L1608
C1360
C1368
R3697
L1618
L1616
L1610
L1606
X1301 7850RESET C1637

L1605
3.3V 1.8V 8002RESET X1601
94
DDC_CLK/DDC_DATA/TMDS : Check items HDMI to HDMI (17)/(19)/(24)
0.9V
2.6V
TMDS Waveform
Zoom
DDC_CLK DDC_CLK
DDC_DATA DDC_DATA
Timing waveform illustration from the start of CEC3.3V to when reset is released : Check items (22)
CEC3.3V
338ms
3002RESET
95
Controlled waveform (I2C), when power is turned on : Check items (23)
Zoom
HSCL
330ms
HSDA
CEC3.3V
338ms
7850RESET
DV3.3V
10ms 10ms
320ms
Zoom
8002RESET
96
4. AUDIO
4.1. AUDIO CHECK
Audio output NG. Refer to "Audio Check PATH" (105 page).
CHECK1 INPUT SURROND MODE SOURCE NO

Check ANALOG audio BLOCK.
Audio output OK? ANALOG 2CH DIRECT ANALOG
YES

Legacy Check Digital audio BLOCK.
Audio output OK? COAX or OPT Don't care
(PCM or DolbyDigital or dts…)
YES

Check ADC BLOCK
Audio output OK? ANALOG 2CH MULTICH STEREO ANALOG
YES

Legacy Check HDMI BLOCK.
Audio output OK? HDMI Don't care
(PCM2ch or DolbyDigital or dts…)
YES
CHECK5 INPUT SURROND MODE SOURCE

HBR audio
Audio output OK? HDMI Don't care
(DolbyTrueHD or dtsHD MA)
YES (Digital audio Block is OK)
NO
Check other factors.
CHECK6 INPUT Connect

HDMI This unit's HDMI OUT → Other AVR's HDMI IN
AVR's (connected in HDMI) audio
Setting SURROND MODE SOURCE
output OK?
CEC STANDBY Don't care HBR audio(DolbyTrueHD or dtsHD MA)
YES NO
Check Digital audio BLOCK Check HDMI BLOCK.
97
4.2. Power AMP (MAIN UNIT)
No sound is output.
The protector operates.
YES
Is the power transistor open or short- YES

circuited? Replace the power transistor.
2SB1560/2SD2390
NO
Is the emitter resistance of the power YES

transistor open? Replace the emitter resistance.
0.47Ω
NO
Is the base resistance of the power YES

transistor open? Replace the base resistance.
22Ω
NO
Is the trimmer potentiometer between the YES

base of the power transistor open? Replace the trimmer potentiometers.
1kΩ
NO
Are the zener diode and diode which

are connected with the base of a power YES
transistor short-circuited? Replace the zener diode and the diode.
MTZJ3.3B
1SS133
NO
YES
Is other transistor trouble? Replace the transistor.
NO
YES
Is other resistance trouble? Replace the resistance.
NO
Turn on the power, check that voltage of the section is normal and that idling electric current is
flowing.
98
4.3. Analog audio
No sound is output
Is the voltage of ±7V supplied to NO

The power supply of ±7V is repaired.
AV B'D CP4201?
YES
Is the audio signal transmitted to YES

The power amplifier is repaired.
AV B'D CN4202?
NO
NO
Connect the connectors properly.
Is the serial data for electronic volume YES Is the connector correctly connected
transmitted to AV B'D CP4201? with HDMI B'D?
YES
The HDMI B'D is repaired.
YES
Once more, check the connection of the connector.

When you can specify the troubled channel and function, check the corresponding
signal route.
99
5. Network/USB
5.1. Cannot connect to network
Checking the environment
NO
Turn off the power and check the LAN cable
Is the LAN cable properly connected?
properly, and then turn the power back on.
YES
Checking the settings
YES
Set the IP address and other parameters
NO properly. For a fixed IP setting, check
Are the NR1603's network settings correct? whether the IP address is redundant with
that of other devices and the subnet mask
setting is correct.
YES
NO
Are the router, hub and other peripherals properly connected? Connect them properly to peripherals.
YES
Check the router's operating instructions

NO and set it properly.
Are the router's settings correct?
Check whether there are connection
restrictions due to the MAC address, etc.
YES
Checking the set (NR1603)
NO The circuit from AC inlet to N3601 is

Is a voltage (5V) supplied between the pins 1 and 4 of N3601? defective.
YES
NO
The U3601 and surrounding circuitry or
Is output voltage (3.3V) supplied from U3601?
circuitry of 3.3v device are defective.
YES
NO The U3604 or U2602 and surrounding

Is output voltage (1.2V) supplied from U3604?
circuitry are defective.
YES
Is the version of IMG or Ethernet SBL displayed in Version check NO

The firmware of ethernet is defective.
mode?
YES
The U2802 and surrounding circuitry are defective.
100
5.2. USB device is not recognized
Checking the USB device
YES
Are you using a USB hub? Don't use the USB hub.
NO
Only mass storage devices in FAT16 or

NO
FAT32 format or MTPcompatible devices
Is the USB device compatible with the set?
and iPod (Remove some models) are
supported.
YES
Checking the set (NR1603)
Is the wire properly connected between N2801 on the HDMI board NO

Connect the wire properly.
and CN4401 on the USB board.
YES
NO
Is a voltage (5V) supplied between the pins 1 and 4 of CP4402 on the The U2806 and surrounding circuitry on the
USB board (USB connector)? HDMI board are defective.
YES
The circuitry from U2602 on the HDMI board to CP4402 on the USB
board is defective.
5.3. No picture or no sound is output
Checking the set (NR1603):(If no picture is output)
NO The circuit between U2602 and U2803 is

Are video signals output from U2803 pin 27 (Y) and pin 24 (C)?
defective.
YES
Check the analog video circuit.
Checking the set (NR1603):(If no sound is output)
NO
U2602 and surrounding circuitry is
Are S/PDIF signals output to U2203 pin 10?
defective.
YES
Check the Digital audio circuit.
101
HDMI test point
N3601
N3404 N3402 N3401
4 FRONT_RLY
N3601 N3409
6 H/P_GND
3 C/S_RLY
1 H/P_RLY
2 SB_RLY
DIP C/S
5 H/P_R
7 H/P_L
1 1 13 1
7 9
4 ETHERCVBS
1
1 MAIN_PWR
C3801
5 COMP_SW2
4 COMP_SW1
13 D/MGND
C2465
11 D/MGND
R2489 C2473
4 RADI_THERMAL
9 D/MGND
7 D/MGND
5 D/MGND
3 D/MGND
1 D/MGND
C3799 CLP1001
12 VDICR
10 VDICB
3 DGND
2 DGND
5 D5.2V
4 D5.2V
5 TR_THERMAL
8 VDIPY
1 D/MGND
6 CVBS
R2418 C2455 R2417
R2470
R2453
R2454
R2445
R2435
R2469
8 V_IN_C
7 V_IN_B
6 V_IN_A
9 PSAVE
2 NC
3 ASO_DET
2 DC_DET3
1 DC_DET4
C3755
R2101 R2001 L3628
R2471
C3750
C2409
R2472
R2456
R2455
R2446
R2436
C3811 C3810 C3813
3 NC
2 NC
C2433
R2408
R2415 C2454 R2416 C3758 L3627 N1301
C3745
L3626
C2024
C3730
C3748
R2490 C2474 C2466
R2019
N2001
R2020
R2120
C2033
C2030
23 C3818
ADSP21487KSWZ-3B
C2407 C3791
R2025
R2024
U2402
C2050
R2026
R2028
R2027
U2001 C3726
R2030
C3753
L3609
C2046
C2002
C2041
C2408
R2409
R2016 L3610
N3405
C2482 R2017 R2048 R2119
C2487
C2434
R2006 R2049 C3605

N3403
U2406 C2464 10 1
C3623
C3802 C3812 R3611
C2481 R2007 C2004 R3605
N2401 R2003
C2485
R3234 C3216 C2006 C3629

C2403
C3627
C2421 R3235 R2002 R3630 C3603 C3761
R3252
C3211
R1358
R3224
Q3206
R3253
R1312
R3254
C3816
C3742
C3633
C2438 C2406
C3817
R3223 R2103 R3629 R3609 C3819
C2426
Q3220
R2411 C2412
R2104
C3641
C3647
C3789 C3651
R3633 R3634
C3653 R3641
R2011 C2089 R2031 R3639
R3694
R3693
R3692
R3691
R3690
R3689
R3688
R3687
C2076 R2033 U3603
C2457
R2422
R2421
L3606
R2105
L3605
Q3205
R2106 R2029 C2088 C3639 U3605
L3622
L3621
C2401 C3214 R2107 R2035 C3621
R2501
R3236
C2489
C2013 -
C3210 L3617 C3659
U2401
R3225 R3221 R3255

R2438
R3237
R2475
R2476
R2460
R2459
R2448
Q3212
Q3213 R3220 C2090 C3606 C3763
C3630
C2078 R3612 -
C1384
C2446
L3618 R3636 C3636
C1371
C1374
C1376
C1379
C1380
C1382
C1383
C2418 R3239 CP1000
EN29LV160BB
Q3204 C2080 C3820 NR1603 HDMI PCB
R1066
R1067
R3635 C3665
C1168
C2082
U2003
R3219 Q3211 7020-07201-020-0S
C2447
R3226 R3222
C3654
Q3215
C3692
C2475 C2476
C2467 C2468
R2491 R2492
R2407
Pb
C3723 R3642
C2437
Q1011
R2410
C3725
U3601
R1064
C3703 C3694
R2406 C3023 C2091
R1576 R1577
AD8195 IC1005
FB1016
U2407
R1060
L3611
D1035 IC1005
C2402 U3606 R1061
Q3209
R3229
R3232
R2405 R3081 R3080 R2116 Q1010 R1059

U3004
R3227 R2115
C2427
C2428
C2450 C2451 R3062 C3025 C3024 L3612 D1003

C2449 R3241 L3623 R2255 R1054 D1002
L3403 R3075 R2254
R3073
C
R3074
L3624 C3624 C3642

R3070
R3063
C3020
R3061
R1052
R1056
R1055
R3060
R3064 C2092 R2253

R3069
C3409 R1053
R2437
C3415 C3019 C3022 R2042 R3625 R3626 C3601 C3765 R2252

C2425
R1051
C2424
C2422
R1057
IN ICT OP ADJ FI
R2265
R3607
C3783
R2500 R2112 R2114 C3649
C3675
2 40 R2043 C2233
R2499
R2277 R2046
C2107 C2106
C2104 R2044
R2108
C3625
R2018
C2095
R3656
N3408 R3637 C3631
C3405 C3418
R2040 C2094 R2109 R2110
C3736
Q3603
R2111
C2093 Q3602
U2203
1 39 C2225 U3601
L3401
Q3610
R2251
R2250
R2021 R2022
C3699
R2256 C2224 C3688
C2039 C2044 Q3601 R3650
L3601
C3674
R2278
C3407 C3416
C2404
L3602
R2257
C3411 C3414
C2222
R2231
L3613
R2276
X2001 R3651
R2228
R2258
R2229
R2230
R2232
C2486
R2233
C3737 C2488 R2245 R3655
C3787
L3614
L3402
L3404
C2223
U2206 C3764 R1637

R3027
R3028
R3025
R2259
R3018
R3017
C2221 JACK1000
R2225
C3762
R2244
C2220
C3009
C3012
C3637
R3023
R3024
C3619
R3030
R3031
C3011 TC74VHCT244AFT R2260 R3654

D2401
C3010 C3673
C3698
R3402 1 7 R2269 R3649
R2473
R2474
R2447
R2458
R3657
R2457
R3026
R2248
R2249
R2243
R2241
C2212
R2224
R2242
R2240
R2270
C2213
Q1606
X2201
R3403
R3029
D3401 R3652 R1409 R1408 Q3609

E
R2273 N2201
C3695
C3734
C2214
R3404
R3068
R3065
R2419 R2420 Q3004 R2246

NR1603 HDMI PCB LPP
C1320 C1319
C1316 C1315
C1317 C1314
C1318 C1321
C1515
Q3625
C3774
Q3621
Q3615
C2456 Q3608 R1638
U3604
R3668 Q3604
R2247
R3405 C2210 R2271 C1032
R2272
Q3611
U2803
C3717 L3603
R2274
C3676
-
R3608
C3602
N3406 R3663 R3675
7020-07201-020-0S
R2808
R2863 R2859
R2860
C2853 R2810
C2803
L2815 R2853
U1304
L3604
LC89058W-E
-
Q3619
C3690
I O
R2807
G
C1471
C3681 R3670
L2814 R2852
C3700
C1493
R2223
C2211
C2032
C2043
R2275
U2203
C3752
C3410
C2209
C3620
L2813 R2851 R2220 C3626
C2230
C3420
R3095
R3632
C3634
U3607
C1483
C1826
C3628
C1473
L1801
R1819
R1818
C1852
L2812 L2811
C1853
C3413 R3083 C3632
C1499
R1306 R1315
R2813
U2803 R2812
R2826
R2824
R2822
C2812
C3728
5 GND C2805
4 GND C2804
C3689
C3685
C2669
C3417 R3034 C2208 C3604 R1308 R1320
N2801
R3046
C1807
R3206
C3202
C3412 R3096 R3631 R1307
L3607 R3638
R3045 R1319 - C1716
-
U2205
C3638
R2858
C3686
R3610
U2207
R2809
C3419 C2828 C2218 C2811 C3652 R1302 R1310

D R2261
R2208
R2209
U2806
R3043
R2201
C3408
SAA7121H
C2205
R1309 R1314
U2806
R3042 C R2262
1 +5V
C3421 C3804 C2806

-
3 D+
R3680 R1301 R1305 C3720
C2629
C2234
2 D-
C2672
R3037
R3640
R2263 - C1854
R1654
R1405
R3100
C3406 N2801 L2804 R2861 C2232 R2264
R1642
C2239
U3604
R3212
R3051
U3602
C1486 R1347
L2805 R2806
C3744 L2803 R2805
-
N
R
P
C3014
R3628
C3422 R1682
-
C1833
H
G
R3076
D
C
B
C1802
E
F
C1696
C3768
M
C3015 C3016
L3616
K
L
J
C1305
L3615
C1801
C1605
R2266
R1693
R1694
C2238
L1602
C3401 C3207 R2818 C1490 R1348 R1406
C2826
C3712
R1417
R1414
R1415
- R2268 L3608
Q3617
C3402 R3213 R2819 C1387
Q2601
1 2 3
Q2602
R2602
R3627
X3001
C2627
C2668
C3672 L3619 R1684
C1729
C3650
R3039
R3012 R3210 - C1393 R1352
C3724
R3059 U3002 R2617 Q3626 R1807
C2235
C2236
D
C
B
R2607 R2707
E
F
A
L2806
-
R3401 R1719
R3660
R1351
R1667
R3662
C3622 R1809 R1645
R2705
R2701
R2704
R3666
R3673
R3058 L3620 C1304 - C1508 R1679 R1646

R2614
AC
AB
AA
R3057 C2825 Q3614 R1811
M
R3050
H
R
P
G
Y
V
L
T
J
C2810 C1303 R1632
U3201
N2602
7 8 9
R2267
R1668
Q3607 R1813
R3647
C3640
AC 1 O I
R3682 C2814 1 C1302 R1683 2
-
R1817
R2635
R2721
AB
C3018
6 R3676 C1311
C2809
U3608
AA 3 G
R3683 C2813 C2678 C3697 R3669 C1309
Y
R1815 U1802
4 R1695 -
C3017
C2625
C3203
C3204
C3806 R1666 5
R2845
C2832
W
R2846
C1310 R1681 -
L2601
C3792 V
K4T51163QJ 6
C2824 Q3606 Q3620 U 7
C3727
-
C3797 R3679
R3648
Q3627
C3701
T
R1689
R3653
9
C1034 C1312 R1338 -
R2834
R2831
R
C2827
C2624 10
R2849
R1360
P
N3407 R1403
R3659
-
R3661
C1517
R2709 R2713
C1503
C2833
ADV8002-4
11
R1625
U1601
Q3613
N
X1601
C2626 C3696 R1404 R1357 R1687 12
-
R1349 C1500
M
R2711
R3681 C1509 13
-
L
R3665 R2613 C1510 R1344 14
C1702 C1703
K
R1686
R3658
D3601 R3678 R2608 - U1001
J
- U1603
R3677 D3602
R3672 ADV3002BSTZ
H
U1801
U2601 C2823
C2822
L2808
L1617 - 17
U2603
X1301
R1652
R1651
G
C3795 C1512 K4T51163QJ
U2802 U2602
18
C1834
F
Q3007
R2609 Q3612 19
E
C1511 - R1678 -
M
N
H
R
P
D
C
B
E
F
A
L
J
D 20
C3677
R2214
Q3008
21
R1626
C
R2213 R1353 R1633
R3019
L1607
1 2 3
D R2611 R1806
B
R3085
R3087
R1650
R1649
R2212 C1504 C1505 C1506 R1673
A
R2603 C1507 R1808 C1688 C3822
23
22
R2610 R2215 C1501 C1712 R1643 R1624
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
C3790 U2802 R2717 R2646 C1502 R1810 R1677 C1713
R3033 R2643 R2644 R2219 U1302 C1686 C1687 L1615 C3756
L2809
N3001 C3788 R3209 R3208 A R1812 C1640

R2216
N1601
C1378 C1375 ADV7850 R1623 R1644
7 8 9
R2218
R3207
R3032 L2810
L1619
R2720 R2649 R2648 B C3205 R3211 R1410 R1411 R1814 R1676
C1707
L1608
R3090
R3097
R3094
R3092
R3088
R3086
R3084
R3099
C2656
C2821
C2820
R3098
R2631 C2655
1 7 R1816 C3823
C1363
R2629 R3695
C2816
R3020
R2802
R3021 E U2602
C1372
A R3696 R1311 R1675
L1618
L1616
L1610
L1606
C1360
C1808 R1820
C1368
R3022 -
R2620
DM860A R3697 R1316 C3767

L2807
R2830 R2829 R2833 R2832 C1637

R2615
C2817 - R3698 D1301 R1304 C1658 C1714

N2601
C2807 C2808 L1605 L1613

C3008
C2818
C2819
R2211
-
-
OUT G VCC
R3066
R2632
R2626
R2622
R2630
R2627
R3699
R2628
R1328 D1302
C2604
R2624
L2801
R2616
C3702
R2803
R3701
L2802
C1366
C3007
U3001
R2205
R2623
C2215
R2625
D1303 R1330
R3067 Q3005
R3700
-
-
N3002
C1652
-
1 11 R2207 R2236 1 C1365 R3702 C1719
D3005
R3010
D1304 R1329
R2650
R1700
C2659
B 7
R2234
R2239
C3708 U2204 R2237 D2802 D2801 D2804 D2803 A L1609

R2647
R2210
R2639
R2645
R3204
R2640
C2207 R2206 R2601 - - R1332 R1317 U1604 R1699
R1004
R1016
R1012
C2206 Q1301
R1003
R1015
R1011
D1307 D1308 D1311 D1312
R1729
R1006
R1014
R1010
C2202
R1731
R1002
R1732
R1730
L1622
C3201
L1625
L1624
L1623
Z3001 R2204 Q3202 R3203 D1615
R1039
R2652 R2651
R1040
- R1701
D3001
R1007 R1008
R2801
C2201 D1305 D1306 D1309 D1310
-
R1724
R1722
R1720
R1043
R1715
D3201 R1037
Q1302
Q3003 R2221 R1041
Q3006 R3079 D2201 R2203 R1038
K3002 D3006
R2202
R1044
U2201
C2204
C3404
Q1006
R3001
R1042
R3002
C1718
D2202
Q1004 Q1008
Q1003 Q1007
K2201 K2202 N1002 N1003 N1004 R1653 D1605 D1606 D1609 D1610
R1647
C3423 -
C3693
D3004 C2203 D1611

C3403 D1603 D1604 D1607 D1608
Q1001
N2802
Q1005
R1713
R1709
R1705
R1707
R1711
N1001
R1721
R1723
R1717
C3704 R3011
4
42
D1601 R1641
C3005
C3006
C3
Q3002 - D1602 R1648

R3215
R3217
R3216
C3001
R1725
R3003
R1001 -
Q3001
R3004
-
R3005
D3002
-
D3003
-
C3003
C3002
U2202
C3004
R3009
Q1002
R1005
C1705
C1706
R1013
R1009
R1726
N3201 -
K3001 N1302 - N1602
(COMPONENT SIDE)
USB test point
C4442
CP4402
J4033 CP4402
CN4402 J4032
CN4401
(COMPONENT SIDE)
102
6. SMPS
DC 5V is not output.
Is there damage in IC4140 YES Replace the IC4140 (TOP258MG) and

(TOP258MG)? D4142/D4143/D4144/D4145.
NO
YES YES
Is there the damage in D4142/D4143/
Is the fuse (F4140) blown? Replace the damaged parts.
D4144/D4145/IC4140?
NO
YES
Is there solder short circuit in the PCB Repair the solder short part of the PCB
board? board.
NO
YES YES
Is there a damaged part? Check the damage of each part. Replace the damaged parts.
103
Operation waveform for each part
SMPS B'D
Primary drain
(Caution: High voltage, electric shock)
After primary side rectification

(Caution: High voltage, electric shock) After secondary rectifications
OPTION
BKT4140 L4141 C4148 OPEN
M3 OPEN OPTION
L4140 OPTION
F4140 S.E.C JP4140 JUMPER D4142 1N4007
2
100/200(18*31.5)
R4148
470P/250VR4140 OPEN
live ZD4151
C4151
1N4007 ZD4147
2M2
ET 4 3 4 3 D4143 MTZJ22B
Neutral
｡ﾜ｡ﾜ MTZ39B
1
C4143
0.1/250V ｡ﾜ｡ﾜ D4144 1N4007 ZD4148 ZD4152
1 2 1 2 MTZ39B MTZJ22B
D4145 1N4007
R4149
BKT4141 ZD4153 D4149
470P/250V
D4141 1N4007
D4140 1N4007
JP4141 JUMPER ZD4149 MTZJ22B SRL3060P
2M2
M3 MTZ39B
C4149 OPEN
C4140
C4141
C4153
ZD4154 1N 1 3
MTZJ22B 2
OPTION
CHASSIS GND ZD4155
R4150
MTZJ22B
1M
R4141 ZD4156
1M MTZJ22B
ZD4157
5600/6.3(12.5*35)
5600/6.3(12.5*35)
5600/6.3(12.5*35)
R4142
1M MTZJ22B
T4140
22K-F
4700N-K
R4157
OPEN
OPEN
100N-K
R4164 R4154 1 EER-2834
12 56
1M 10
11 IC4142
D4147 ｡ﾜ 10
MTZ5.6B
PC123Y22
1 2
1N4007
R4160
R4162
R4163
OPTION 3 ｡ﾜ｡ﾜ 9
C4155 R4158
C4159
C4161
C4162
C4164
C4165
D4146 ZD4150
10/50(NXA) 3K3
｡ﾜ
CP4140 6
8
1N4007 MTZJ22B D4148 7
R4147 1N4007 R4159C4166
270K
ZD4159
ZD4158 5 5K6 100N-K
MTZ39B
D4151 OPEN
TR4140 C4156 2200P/250V C4160 100N-K IC4143 C4167
1 2 3 4 5
KMB2D0N60SA KIA2431AP OPEN D5.2V
OPTION 3 2 1 R4161 D5.2V
5 BKT4142 6K8-D
C4142
ZD4160
1
D C X V
R4151 R4153 M3 R4165
DGND HDMI B'D
0.01/250V MTZJ6.2B IC4140 DGND
3 15K 6R8 C4154 10
TOP258MG MAINPOWER
100N-K
100N-K
100N-K
2 100N-K RLY4140
HL31-1AT-5H
330K
S S S S S
OPEN
6 7 8 9 10 CN4141
R4145 D4150 5P_WIRE(2.5mm)
1M R4152 C4152 1SS133T
F4141
R4143
C4145
C4146
C4147
C4150
1K 47/25(NXA)
C4157
OPEN
2 1
TR4142 R4156 4K7

RANS OPTION KTC3198Y
CP4142 R4155
35328-0263 10K
C4158
OPEN
SMPS unit
(Unloaded) A B C
Set A B C
104
Audio Check PATH
Refer to troubleshooting "4.1. AUDIO CHECK"(97 page).
HDMI
CHECK6 TRANSMITTER
ADV8002/8003
with scaler
CHECK5 video encoder
OSD etc...
ADV7850
FRONT TMDS
BUFFER
ARC(SPDIF)
AD8195
CHECK4
CHECK2
LAN8720A
CHECK3
CHECK1
105
CLOCK FLOW & WAVE FORM IN DIGITAL BLOCK
WAVE FORM
DIR input
1
CH1:D-DATA
DIR output
2
CH1: DATA
N3404 N3402 N3401
4 FRONT_RLY
N3601 N3409
6 H/P_GND
3 C/S_RLY
1 H/P_RLY
2 SB_RLY
DIP C/S
5 H/P_R
7 H/P_L
13 1
Detail A
1 9 1
7
4 ETHERCVBS
1
1 MAIN_PWR
C3801
5 COMP_SW2
4 COMP_SW1
13 D/MGND
C2465
11 D/MGND
R2489 C2473
4 RADI_THERMAL
9 D/MGND
7 D/MGND
5 D/MGND
3 D/MGND
1 D/MGND
C3799 CLP1001
12 VDICR
10 VDICB
3 DGND
2 DGND
5 D5.2V
4 D5.2V
R2622
5 TR_THERMAL
8 VDIPY
1 D/MGND
6 CVBS
C2604
R2418 C2455 R2417
R2470
R2453
R2454
R2445
Test point
R2435
R2469
8 V_IN_C
R2616
7 V_IN_B
6 V_IN_A
9 PSAVE
2 NC
3 ASO_DET
2 DC_DET3
1 DC_DET4
C3755
R2101 R2001 L3628
R2471
C3750
C2409
R2472
R2456
R2455
R2446
R2436
C3811 C3810 C3813
3 NC
2 NC
C2433
R2408
C2215
R2415 C2454 R2416 C3758 L3627 N1301
C3745
L3626
C2024
C3730
C3748
R2490 C2474 C2466
R2019
N2001
R2020
R2120
C2033
C2030
23 C3818
ADSP21487KSWZ-3B
C2407 C3791
R2025
R2024
U2402
C2050
R2026
R2028
R2027
U2001 C3726
R2030
C3753
L3609
C2046
C2002
R2236
C2041
C2408
R2409
R2016 L3610
N3405
C2482 R2017 R2048 R2119
C
CH2: fs
C2487
C2434
B
R2006 R2049 C3605
N3403
U2406 10 1
C3623
C2464
R2234
R3611
R2239
U2204 R2237
C2481 R2007 C2004 C3802 C3812 R3605
N2401 R2003
C2485
C2006 C3629
R3234
R2210
C3216
C2403
C3627
C2421 R2002 R3630
R3235
C3603 C3761
R3252
C3211
R1358
R3224
Q3206
R3253
R1312
R3254
C3816
C3742
C3633
C2438 C2406
C3817
R3223 R2103 R3629 R3609 C3819
C2426
Q3220
R2411 C2412
R2104
C3641
C3647
C3789 C3651
R3633 R3634
C3653 R3641
R2011 C2089 R2031 R3639
R2206
R3694
R3693
R3692
R3691
R3690
R3689
R3688
R3687
C2076 R2033 U3603
C2457
R2422
R2421
L3606
R2105
L3605
Q3205
R2106 R2029 C2088 C3639 U3605
L3622
L3621
C2401 C3214 R2107 R2035
R2204
C3621
R2501
R3236
C2489
C2013 -
C3210 L3617 C3659
U2401
R3225 R3221 R3255
R2652
R2438
R3237
R2475
R2476
R2460
R2459
R2448
Q3212
Q3213 R3220 C2090 C3606 C3763
C3630
C2078 R3612 -
C1384
C2446
L3618 R3636 C3636
C1371
C1374
C1376
C1379
C1380
C1382
C1383
C2418 R3239 CP1000
EN29LV160BB
Q3204 C2080 C3820 NR1603 HDMI PCB
R1066
R1067
R3635 C3665
C1168
C2082
U2003
R3219 Q3211 7020-07201-020-0S
C2447
R3226 R3222
C3654
Q3215
C3692
C2475 C2476
C2467 C2468
R2491 R2492
R2407
Pb
C3723 R3642
C2437
Q1011
R2410
C3725
R1064
C3703 C3694
R2406 C3023 C2091
R1576 R1577
AD8195 IC1005
FB1016
U2407
R1060
CH3: 64fs
L3611
D1035 IC1005
U3606
R2202
C2402
U2201
R1061
Q3209
R3229
R3232
R2405 R3081 R3080 R2116 Q1010 R1059

U3004
R3227 R2115
C2427
C2428
C2450 C2451 R3062 C3025 C3024 L3612 D1003

C2449 R3241 L3623 R2255 R1054 D1002
L3403 R3075 R2254
R3073
C
R3074
C3624 C3642
K2202
L3624
R3070
R3063
C3020
R3061
R1052
R1056
R1055
R3060
R3064 C2092 R2253

R3069
C3409 R1053
R2437
C3415 C3019 C3022 R2042 R3625 R3626 C3601 C3765 R2252

C2425
R1051
C2424
C2422
R1057
IN ICT OP ADJ FI
R2265
R3607
C3783
R2114 C3649
C2203
R2500 R2112
C3675
2 40 R2043 C2233
R2499
R2277 R2046
C2106
C2104 R2044
C2107 R2108
C3625
R2018
C2095
R3656
N3408 R3637 C3631
C3405 C3418
R2040 C2094 R2109 R2110
C3736
Q3603
R2111
C2093 Q3602
1 39 C2225 U3601
L3401
Q3610
R2251
R2250
R2021 R2022
C3699
R2256 C2224 C3688
C2039 C2044 Q3601 R3650
L3601
C3674
R2278
C3407 C3416
C2404
L3602
R2257
C3411 C3414
C2222
R2231
L3613
R2276
X2001 R3651
R2228
R2258
R2229
R2230
R2232
C2486
R2233
C3737 C2488 R2245 R3655
C3787
L3614
L3402
L3404
C2223
U2206 C3764 R1637
R3027
R3028
R3025
R2259
R3018
R3017
JACK1000
C2221
R2225
C3762
C3009 C2220 R2244
C3012
C3637
R3023
R3024
C3619
R3030
R3031
C3011 TC74VHCT244AFT R2260 R3654 C3673

D2401
C3010
C3698
R3402 1 7 R2269 R3649
R2473
R2474
R2447
R2458
R3026 R3657
R2457
R2248
R2249
R2243
R2241
C2212
R2224
R2242
R2240
R2270
C2213
Q1606
X2201
R3029
R3403 D3401 R3652 R1409 R1408 Q3609

E
R2273 N2201
C3695
C3734
C2214
R3404
B
R3068
R3065
R2419 R2420 Q3004 R2246

NR1603 HDMI PCB LPP
C1320 C1319
C1316 C1315
C1317 C1314
C1318 C1321
C1515
Q3625
C3774
Q3621
Q3615
C2456 R3668 Q3604 Q3608 R1638
R2247
R3405 C2210 C1032
R2271
R2272
Q3611
C3717 L3603
R2274
C3676
-
R3608
C3602
N3406 R3663 R3675
7020-07201-020-0S
R2808
R2863 R2859
R2860
C2853 R2810
C2803
L2815 R2853
U1304
L3604
LC89058W-E
-
Q3619
C3690
I O
R2807
G
C1471
C3681 R3670
L2814 R2852
C3700
C1493
R2223
C2211
C2032
C2043
R2275
U2203
C3752
C3410
C2209
C3620
L2813 R2851 R2220 C3626
C2230
C3420
R3095
R3632
C3634
U3607
C1483
C1826
C1(RX0)
C3628
C1473
L1801
R1819
R1818
C1852
L2812 L2811
C1853
C3413 R3083 C3632
C1499
R1306 R1315
U2803 R2813
R2812
R2826
R2824
R2822
C2812
C3728
5 GND C2805
4 GND C2804
C3689
C3685
C2669
C3417 R3034 C2208 C3604 R1308 R1320

R3046
C1807
R3206
C3202
C3412 R3096 R3631 R1307
L3607 R3638
R3045 R1319 - C1716
-
U2205
C3638
R2858
C3686
U2207 R3610
R2809
C3419 C2828 C2218 C2811 C3652 R1302 R1310

D R2261
R2208
R2209
U2806
R3043
R2201
C3408
DAC input
SAA7121H
C2205
R3042 C R2262 R1309 R1314

1 +5V
C3421 C3804 C2806

-
3 D+
R3680 R1301 R1305 C3720
C2629
C2234
C2672
2 D-
R3037
R3640
R2263 - C1854
R1654
R1405
R3100
C3406 N2801 L2804 R2861 C2232 R2264
R1642
C2239
U3604
R3212
R3051
U3602
C1486 R1347
L2805 R2806
C3744
L2803 R2805
-
N
R
P
C3014
R3628
C3422 R1682
-
C1833
H
G
R3076
D
C
B
C1802
E
F
C1696
C3768
M
C3015 C3016
L3616
K
L
J
C1305
L3615
C1801
C1605
R2266
R1693
R1694
C2238
L1602
C3401 C3207 R2818 C1490 R1348 R1406
C2826
C3712
R1417
R1414
R1415
- R2268 L3608
Q3617
C3402 R3213 R2819 C1387
Q2601
1 2 3
Q2602
R2602
R3627
X3001
C2627
C2668
C3672 L3619 R1684
C1729
C3650
R3039
R3012 R3210 - C1393 R1352
C3724
R3059 U3002 R2617 Q3626 R1807
C2235
C2236
D
C
B
R2607 R2707
E
F
A
L2806
-
R3401 R1719
R3660
R1351
R1667
R1645
R3662
C3622 R1809
R2705
R2701
R2704
R3666
R3673
R3058 L3620 C1304 - C1508 R1679 R1646

R2614
AC
AB
AA
R3057 C2825 Q3614 R1811
M
R3050
H
R
P
G
Y
V
L
T
J
C2810 C1303 R1632
U3201
N2602
7 8 9
R2267
R1668
Q3607 R1813
R3647
C3640
AC 1 O I
R3682 C2814 1 C1302 R1683 2
-
R1817
R2635
R2721
AB
C3018
6 R3676 C1311
C2809
U3608
AA 3 G
R3683 C2813 C2678 C3697 R3669 C1309
Y
R1815 U1802
4 R1695 -
C3017
C2625
C3203
C3204
Detail B
C3806 R1666 5
R2845
C2832
W
R2846
C1310 R1681 -
L2601
C3792 V
K4T51163QJ 6
C2824 Q3606 Q3620 U 7
C3727
-
C3797 R3679
R3648
Q3627
C3701
T
3 R1689
R3658 R3653
9
C1034 C1312 R1338 -
R2834
R2831
R
C2827
C2624 10
R2849
R1360
P
N3407 R1403
R3659
-
R3661
C1517
R2709 R2713
C1503
C2833
ADV8002-4
11
R1625
U1601
Q3613
N
X1601
C2626 C3696 R1404 R1357 R1687 12
-
R1349 C1500
M
R2711
R3681 C1509 13
-
L
R3665 R2613 C1510 R1344 14
C1702 C1703
K
D3601 R3678 R2608 - U1001
J
R1686
- U1603
R3677 D3602
R3672 ADV3002BSTZ
H
U1801
U2601 C2823
C2822
L2808
L1617 - 17
U2603
X1301
R1652
R1651
G
CH1: DATA C3795 C1512 K4T51163QJ 18
C1834
F
Q3007
BICK
R2609 Q3612 19
E
C1511 - R1678 -
M
N
H
R
P
D
C
B
E
F
A
L
J
D 20
C3677
R2214
Q3008
21
R1626
C
R2213 R1353 R1633
R3019
L1607
1 2 3
D R2611 R1806
B
R3085
R3087
R1650
R1649
R2212 C1504 C1505 C1506 R1673
A
R2603 C1507 R1808 C1688 C3822
23
22
R2610 R2215 C1501 C1712 R1643 R1624
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
C3790 U2802 R2717 R2646 C1502 R1810 R1677 C1713
R3033 R2643 R2644 R2219 U1302 C1686 C1687 L1615 C3756
L2809
N3001 C3788 R3209 R3208 A R1812 C1640

R2216
N1601
C1378 C1375 ADV7850 R1623 R1644
7 8 9
R2218
R3207
R3032 L2810
L1619
R2720 R2649 R2648 B C3205 R3211 R1410 R1411 R1814 R1676
C1707
L1608
R3090
R3097
R3094
R3092
R3088
R3086
R3084
R3099
C2656
C2821
C2820
R3098
R2631 C2655
1 7 R1816 C3823
C1363
R2629 R3695
C2816
R3020
R2802
R3021 E U2602
C1372
A R3696 R1311 R1675
L1618
L1616
L1610
L1606
C1360
C1808 R1820
C1368
R3022 -
R2620
DM860A R3697 R1316 C3767

L2807
R2830 R2829 R2833 R2832 C1637

R2615
C2817 - R3698 D1301 R1304 C1658 C1714

N2601
C2807 C2808 L1605 L1613

C3008
C2818
C2819
R2211
-
-
A
OUT G VCC
R3066
R2632
R2626
R2622
R2630
R2627
R3699 R1328 D1302

R2628
C2604
R2624
L2801
R2616
C3702
R2803
R3701
L2802
C1366
C3007
U3001
R2205
R2623
C2215
R2625
D1303 R1330
R3067 Q3005
R3700
-
-
N3002
C1652
-
1 11 R2207 R2236 1 C1365 R3702 C1719
D3005
R3010
D1304 R1329
R2650
R1700
C2659
B 7
R2234
R2239
C3708 U2204 R2237 D2802 D2801 D2804 D2803 A L1609

R2647
R2210
R2639
R2645
R3204
R2640
C2207 R2601 - R1332 R1317 U1604 R1699
LRCK
R2206 -
R1004
R1016
R1012
C2206 Q1301
R1003
R1015
R1011
D1307 D1308 D1311 D1312
R1729
R1006
R1014
R1010
C2202
R1731
R1002
R1732
R1730
L1622
C3201
L1625
L1624
L1623
Z3001 R2204 Q3202 R3203 D1615
R1039
R2652 R2651 R1040 - R1701
MCLK
D3001
R1007 R1008
R2801
C2201 D1305 D1306 D1309 D1310
-
R1724
R1722
R1720
R1043
R1715
D3201 R1037
Q1302
Q3003 R2221 R1041
Q3006 R3079 D2201 R2203 R1038
K3002 D3006
R2202
R1044
U2201
C2204
C3404
Q1006
R3001
R1042
R3002
C1718
D2202
Q1004 Q1008
Q1003 Q1007
K2201 K2202 N1002 N1003 N1004 R1653 D1605 D1606 D1609 D1610
R1647
C3423 -
C3693
D3004 C2203 D1611 D1603 D1604 D1607 D1608

CH2: fs C3403
Q1001
N2802
Q1005
R1713
R1709
R1705
R1707
R1711
N1001
R1721
R1723
R1717
R3011
R2244
4
42
D1601 R1641
C3005
C3006
C3
Q3002 - D1602 R1648

R3215
R3217
R3216
C3001
R1725
R3003
R1001 -
Q3001
R3004
-
R3005
D3002
-
D3003
HDMI (COMPONENT SIDE)

-
C3704
C3003
C3002
U2202
C3004
R3009
Q1002
R1005
C1705
C1706
R1013
R1009
R1726
N3201 -
K3001 N1302 - N1602
R2269
R3652
ADSP21487KSWZ-3B
R2246
CH3: 64fs Detail C
R2247
DATAF
U2001
C2032
CH4: 256fs
C2230
DATADIR1
C3789 U2205
R2261
C2089 R2262
C2629
C2234 R2263
C2076 C2239 C2232 R2264
R2806
R2805
R2029 C2238 R2266
R2035
64FSDIR1
C2090
C2078 FSDIR1
106
LEVEL DIAGRAM
LEVEL DIAGRAM
FRONT ch
＋
＋＋
－－
･
･
･
･
① ② ③
①
②
③
107
LEVEL DIAGRAM
CENTER ch
＋＋
－－
108
LEVEL DIAGRAM
SUBWOOFER ch
＋＋
－－
109
LEVEL DIAGRAM
SURROUND ch
＋＋
－－
110
LEVEL DIAGRAM
SURR.BACK ch
＋＋
－－
111
ＬＥＶＥＬＤＩＡＧＲＡＭ
ＺＯＮＥ２
＋
＋
112
PRINTED WIRING BOARDS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
7CH AMP
(COMPONENT SIDE) A
SBL SBR
J493 C506
C412
IN ICT OP ADJ FI 7CH AMP B'D
R696
FR
R482
CP401
AGND
R481
R718
AGND
AGND
AGND
AGND
AGND
R695
TP402
FL
J528 C504
C428
R436
R697
R427
R687
SBR
SBL
R653
R471
R480
R472
R437
7020-06959-000-3S
SR
TP405
FL
FR
SL
C460
SL
R611
R567
R610
TP404
C492
R644
VR404
R686
R720
C426 C490 R650
R558
R566
CLAMP 400
R473
R600
C476
VR403
R609
C458 C474 +HIGHB
SR
R557
C440 TP403 C472 R601 +HIGHB R652 C488 TP406 CLAMP 401
R525
R581 +HIGHB
R514
C408
R523
C456 VR402 R645 VR407
C442 -HIGHB
Q479 C508
R723
C444 -HIGHB
R408
R438
R717
R694
VR401 VR405 VR406
-HIGHB
R428 R478 Q468 C500
Q480
R484
C404 TP401 Q455 Q456 C424 C486
R607 R453
R577
R643
R564 R524 Q473 C502
R540 R568 R583 C420 Q419 Q420 C422 TP407
Q407 R534
J433
C410 R626 R654
B
C406
Q425 R497 R515
DC DET4 R410 R719 R521 R721 R711 R688
J449 C484 R722 J522
R617 Q467
R663
DC DET3 R538 C454 R602 R444
J487
Q461
R667
ASO DET R516 C468 J503
J530
R713
R429
Q437 R531 R559 C436 R574 Q413 R669
R404
RADI THERMAL R451
R709
J458
C452 Q449
R714
R656
C514 R699
R613
TR THERMAL
R715
Q408
R708
R401 Q443 Q444 R488 R620 R624 R660
J459
Q431 J535 C470 CP405
J499
J477
J410
R440
R710
J483
J492
Q401
J407
R489
R570
R678
CP402
J512
J414
R657
R625
R496
J440
J495
R618
J531
R527
R495
R592
J498
R712
R445
R716
R452
C419
J538
J429
Pb
J409
Q432 C438 HIGHGND

J406
R549
J461
R462
J469
J428
R434 R470
J490
HIGHGND
R675
J473
LUG401 HIGHGND
R499
J541
J434
R459
R585
R628
R421
PREGND
J418
J519
R671
R635
R536
J443
R506
J454
R632
R542
R455
J426
J438
R551
R703
SR
J526
J537
J542
J516
J489
R419
J419
J523
SL
J437
J543
J468
J486
C513 C
J529
J507
J506
J482
CN404 FR
J432
J471
C515
R659
R700
R702
Q405
FL
J467
SBL
J451
R661
J448
ZD416
ZD419
J441
J435
R487
J472
R539
NC
J488
C
R589
J445
R571
R616
R614
R573
R528
J417
SBR
R627
J416
J508
J509
R670
ZD401
R532
R575
R705
R706
R490
R530
R707
R704
ZD410
ZD407
R402
R446
ZD404
R493
ZD413
J513
J514
J511
J496
R668
J540
R441
R443
R541
J436
J502
J510
J497
R485
J478
J536
C443
J539
R409
R582
J444
R503
J415
J422
R416
J452
R546
J425
J491
J453
Q448 Q417
J403
J421
Q460
C491
C516
J420
J544
R454
J457
J505 Q484
J404
J521
C507
C427
J524
J525
R498
J456
J527
R584
J431
CP403
R651
R411
C415 C463 C511
C475
C517
R412
Q412 J446 Q424
J442
C479
J470
J485
C495
J501
J518
J481 C487
J494
J413 J474 C432 C423 C431 C512 R693
C407 C464 R565 C448 J466 C471
C455 C439
R435 R522 J408 J462 C496
J463 J533
C480
Q472
C447
C411
C416 J405
C459
J447 J475 J476 J534
C503
J480
J532 Q436 R479 J515
J412 J423 J430 J424 J450 J465 J484 J504 D439 J520
D421 D427 D409 D433
D403 D415 R608 R612
D404 D422 D416 D428 D410 D434 D440
D
R604
R561
R562
R603
R689
R518
R458
R431
R517
R647
R646
R430
R502
R631
R474
R475
R690
ZD402 ZD411 ZD408 ZD414 ZD417 ZD420
ZD403 ZD412 ZD409 ZD415 ZD405 ZD406 ZD418 ZD421
R588
J411
R698
J439
R526
R483
R569
R655
J427 J455 J500
R415
R511
J479
R598
R674
R641
R684
R555
R640
R425
R554
R424
R683
R467
R545
R468
R512
C402 C449 C433 C465 C417 C497 J517
R597
C430 C481
R439
R519
R432 R560 R605 R476 R648 R691
C462 C446 C494
B C E E C B B
C414
C E B C E E C B B C E B C E E C B B C E B C E E C B B C478 C E B C E E C B B C E B C E E C B B C E B C E E C B B
C510
C E
7CH AMP
(FOIL SIDE) G
7CH AMP B'D
D454 7020-06959-000-3S
D449
R587
C469 R544 R413
R672 D452 R595
D445
D446
R630
C437
D455
R414
C501 D453 D448 R552
C485 R457
D450
D451 D447 R509
R501
D456
R681 R465 D444 C405

C453
R673
D443 R422
R638
C421
H
R629
C493
C477
C509
D458
R456
D457
Pb
C461
C429
C413
R449
R500
R464
C445
R734
R733
R586
R543
R407
C403
R732
I
R731
R636
R420
D432
Q478
R724
R426
R679
D438
D408
D426
Q430
D414 R504
R682
R729
R642
R550
R507
R676 Q418
R463
D420
R685
R730
D402
Q406
R606
Q466 R433
R593
R639 R590 R510
R460 R466 R417 R423
R599
R728
R633 R596
Q442
R513
R726
Q454
R469
R725
R477
R692 R649 R563 R547 R553
R727
R556
Q463 Q439 Q403
R520
Q475 Q415 Q451 Q427
B C E
R666
C498
B C E
R623
C482
B C E
R450
C418
B C E
R580
C466
B C
R494
E
C434
B C E
R537
C450
B C E E
R406
C401 J
E C B E B E C B E B E C B E B E C B E B E C B E B E C B E B E C B B
C C C C C C C
鉛フリー半田
半田付けには、鉛フリー半田 (Sn-Ag-Cu) を使用してください。 M
Lead-free Solder
When soldering, use the Lead-free Solder (Sn-Ag-Cu).
113
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
SPK
(COMPONENT SIDE) A
JACK4001
C4025 C
JACK4000
J4025 J4033
C4029 C4027 C4026 J4042 C4024
C4028 J4019 R4007 C4001 C4023
J4041 J4058
RLY4001 L4001
L4003
C4011 J4028 J4057
CLP4006
R4003 R4008
C4009
R4009
D
R4001
RLY4003 R4010 C4008
J4010 C4003 RLY4000
J4024 L4002
J4008
R4000
C4000 J4032
C4005 J4023
J4012 L4000
C4013 J4031
C4012 J4030 J4045
J4022 C4004
R4012
R4005
C4006
J4016
RLY4002
J4021
R4011
J4029 J4052
R4002
E
J4040
J4009 C4002
7028-07202-101-0 R4016
FL
L4005
C4014 R4004
L4004
SPK B'D FR
CEN
SL
SR
CN4000
R4013 C4010
L4006 IN ICT OP ADJ FI
R4006 BKT4001
BAR CODE RLY4004
R4017
CP4000
J4075 R4015
J4011
R4018 C4007
R4019
J4051
R4025 LIMIT-
LIMIT+ J4065
J4039 J4050
MUTE+7V
RLGND
RL+B
J4070 G
R4014 RL+B
RELAY_F
RLY_S/C
J4036
RELAY_SB
RELAY_H/P
H/PL
J4064
D4003
H/PGND
H/PR
R4020
J4037 C4015 DZ4000
CN4002
J4049
R4029 MTZ6.8B H
PREGND
HIGHGND
0.1-J/5W
J4048 R4028
HIGHGND
R4021
HIGHGND
-HIGHB R4026 R4022
-HIGHB
R4027
-HIGHB J4044
+HIGHB
+HIGHB
+HIGHB J4043
J4056 R4023
I
R4024
J4047 J4063
J4034 J4055 BKT4002
C4056
J4054
J4053
J4059
J
BONDING
BONDING
C4030
R4030 R4031
6800/63 C4031
6800/63
J4074
J4046 J4069
J4062 L
J4067
J4071
J4068
J4066
J4072
J4073
J4061
J4060
CLP4001
鉛フリー半田 CP4001
半田付けには、鉛フリー半田 (Sn-Ag-Cu) を使用してください。 CN4001
Lead-free Solder
SBR
SBLGND
C4053 C4057
M
SBL
- AC AC +
D4006
114
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
SPK
(FOIL SIDE) A
C4046 C4043 C4052 C4047
C4035 C4034 C4040 C4051 C4048
C4036 C4033 C4039 C4045 C4042
C4037 C4032 C4038 C4044 C4041 C4050 C4049
C4018
C4019
C4021
C4020 C4022
C4016
C4017
B
D4005
D4002
C
D4001
D4004
FL
FR
CEN
SL
SR D
D4000
Q4006 Q4004 Q4002
Q4003
LIMIT-
LIMIT+
Q4005
E
MUTE+7V
RLGND
RL+B Q4007
Q4009
RL+B
RELAY_F Q4008
RLY_S/C
RLY_SB Q4001
RLY_H/P
H/PL
H/PGND
Q4000
F
H/PR
H
C4054 PREGND
HIGHGND
HIGHGND
HIGHGND
C4055 -HIGHB
-HIGHB
-HIGHB
+HIGHB
+HIGHB I
+HIGHB
SBR
SBLGND
SBL
L
鉛フリー半田
半田付けには、鉛フリー半田 (Sn-Ag-Cu) を使用してください。
Lead-free Solder
M
115
116
M Lead-free Solder
鉛フリー半田
L
K
PQ033DNA1ZPH
R4145
C4150
C4147
C4146
C4145
AZ4580M
R4152
TR4140
R4147
C4154
R4151
R4154
I
R4155
DGND
DGND
D5.2V
D5.2V
C4161
C4159
C4158
MAINPOWER
E C
7:BT_LINK
8:RC_OUT
1:M_XR
2:GND_MX
3:M_XL
4:NC
5:RC_IN
6:FRONT IRIN
9:KILLIR
10:A-8V
11:A-8V
12:A+8V
13:A+8V
14:D/MGND
15:M3.3V
16:D5V(MX)
17:SWM5V(MX)
R4156 D5.2V
H
R4162
R4160
CA A
DGND
C4157
R4161
C4166
C4160
G
(FOIL SIDE) (FOIL SIDE)
RC5_MX SMPS
F
C4620
R4164 R4142 R4141
C4621
ZD4149 ZD4148 ZD4147 JP4141 BKT4141
MTZJ39B MTZJ39B MTZJ39B D4141
CP4142
J4684
J4678
E
J4686
J4687
U1B,FB:100UF/200V Pri.
N1B,K1B:100UF/400V D4143
BURRING
C4151
J4151
C4628
R4149 R4148 D4145
F4141_2
BONDING C4149 0.01UF/250V

F4141
IN ICT OP ADJ FI
BONDING
J4144
T6.3AL/250V
D4140
C4638 J4680 JP4140
J4671 IC4140 D4144 C4168
TOP258MG L4141 COIL FILTER L4140 C4143
C4622 0.1UF/250V COIL FILTER 0.1UF/275V
R4611 R4143
JACK4601
D4142 C4140 Sec.
D
R4610 ZD4152 ZD4153 470P/250V
V
ZD4160 MTZJ22B MTZJ22B
1K
F4140_2
ZD4151
F4141_1
P/ 3
R4150 MTZJ22B C4148
00 415
0.01UF/250V
J4150
1 C
J4143
J4681 J4677
C4634 ZD4154
R4618
J4149 MTZJ22B NEUTRAL
D4146
J4682
J4683 C4152 C4155
J4142
J4673
D4147 ZD4157 ZD4156 ZD4155 BONDING BONDING
F4140
MTZJ22B MTZJ22B MTZJ22B
CP4613
C4165 C4163
T2AL/250V
ZD4150 5600UF/6.3V
OPEN
SMPS B'D 7028-07202-201-0

C J4685 MTZJ22B
R4140
T4140 J4145
F4140_1
J4679
BAR CODE
J4148
C4633 C4635
J4676
C4142
R4153
0.01UF/250V
BONDING
D4148
J4672
ZD4158
J4670
MTZJ39B
JACK4600
C4636
LIVE
J4674
BONDING
ZD4159
4:NC
TR4142
MTZJ5.6B RLY4140
3:M_XL
11:A-8V
J4675
10:A-8V
1:M_XR
C4156
13:A+8V
12:A+8V
5:RC_IN
9:KILLIR
IC4142
15:M3.3V
D5.2V
D5.2V
Pri. C4141 BONDING
DGND
DGND
2200P/250V
7:BT_LINK
8:RC_OUT
PC123
2:GND_MX
14:D/MGND
16:D5V(MX)
MAINPOWER
470P/250V
6:FRONT IRIN
17:SWM5V(MX)
B
Sec. JK4140
D4150
CN4141
BONDING
J4147 J4152
BKT4002 R4157 J4146
C4164 C4162
R4158 D4149
5600UF/6.3V 5600UF/6.3V
BONDING IC4143 R4159 D4151 R4163 C4167
A (COMPONENT SIDE) (COMPONENT SIDE)
RC5_MX SPMS
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
7.H/P_L
6.H/P_GND
5.H/P_R
1
4.RLY_F
REG
3.RLY_S/C
2.RLY_SB
1.RLY_H/P
CP4615
CP4612
鉛フリー半田
J4664
VIDEO -5V
VIDEO +5V
VIDEO GND
VIDEO GND
J4669
FRONT_CNT
J4630
Lead-free Solder
2
J4639
J4631
CN4606 CN4607
CLP 4605
J4665
J4666
A-8V
A+8V
J4667
AGND
AGND
RL_+B
(COMPONENT SIDE)
(COMPONENT SIDE)
DA_+5V
RL_GND
TU 5V/9V
VIDEO-5V
VIDEO+5V
J4625
VIDEO_GND
VIDEO_GND
CP4610
D4603
3
D4602
R4600
D4608
15.V-5V D4604
14.V-5V
13.VAGND J4640
12.VAGND
11.V+5V
10.V+5V CP4611 C4606
9.PSAVE
8.V INC 7.H/P_L
7.V INB 6.H/P_GND N.C J4623
6.V INA 5.H/P_R
J4624
5.COMPONENT SW2 4.RLY_F +5V_IN 7805
4.COMPONENT SW1 3.RLY_S/C +5V_IN
J4688
3.NC 2.RLY_SB VGND J4641
2.NC 1.RLY_H/P VGND
J4689
1.D/MGND -5V_IN
4
-5V_IN J4642 IC4604

NJM7805FA
C4610
4700/16

CP4609
9.PSAVE
8.V INC
J4649
7.V INB
6.V INA J4645
CP4600
5.COMPONENT SW2
J4690

4.COMPONENT SW1
3.NC R4601 J4643
2.NC 7905
1.D/MGND D4605
CP4608
5
C4607 J4621
13.D/MGND
12.VDICR IC4602
11.D/MGND J4644 NJM7905FA
10.VDICB J4622
9.D/MGND D4610
8.VDIPY
7.D/MGND C4611
6.CVBS
5.D/MGND 3300/16 C4602
4.ETHERCVBS J4620
3.D/MGND
2.NC
1.D/MGND J4635
J4637 7805
6
D4600
C4600 J4636
CP4607
C4609 IC4600
NJM7805FA
J4634
13.D/MGND 4700/25
R4603
12.VDICR
11.D/MGND
10.VDICB
9.D/MGND
J4650
8.VDIPY
7.D/MGND
MTZ33B
ZD4601
6.CVBS
5.D/MGND
4.ETHERCVBS
J4648
J4633
7
3.D/MGND
2.NC
CP4601
J4646
D4611
1.D/MGND 7908
C4605 J4638
J4668
J4647 IC4603
NJM7908FA
D4607
J4632
R4602
C4608
4700/25
ZD4600
MTZ33B
-8V_IN
8
-8V_IN D4609
CP4616 AGND
AGND J4627
AGND J4626
7808
AGND
AGND
+8V_IN J4629
D4606
+8V_IN
J4628 IC4605
C4604 NJM7808FA
9
117
10
REG
11
RL_+B
(FOIL SIDE)
(FOIL SIDE)
A-8V
DA_+5V
A+8V
TU5V
RL_GND
AGND
AGND
FRONT_CNT
1.D/MGND
2.NC
3.D/MGND
4.ETHERCVBS
12
5.D/MGND
6.CVBS
7.D/MGND
8.VDIPY
VIDEO-5V
VIDEO+5V
9.D/MGND
VIDEO_GND
VIDEO_GND
10.VDICB
11.D/MGND
12.VDICR
13.D/MGND
N.C
+5V_IN
+5V_IN
13
1.D/MGND VGND
2.NC VGND
3.D/MGND -5V_IN
4.ETHERCVBS -5V_IN
5.D/MGND TU_GND
6.CVBS TU_GND
7.D/MGND TU_VOL_IN
8.VDIPY TU_VOL_IN
9.D/MGND
10.VDICB
11.D/MGND
12.VDICR
13.D/MGND
14
1.D/MGND
2.NC
3.NC
4.COMPONENT SW1
5.COMPONENT SW2
6.V INA
7.V INB
8.V INC
9.PSAVE
1.D/MGND 1.RLY_H/P
2.NC
15
2.RLY_SB
3.NC 3.RLY_S/C
4.COMPONENT SW1 4.RLY_F
5.COMPONENT SW2 5.H/P_R
6.V INA 6.H/P_GND
7.V INB 7.H/P_L
8.V INC
9.PSAVE
10.V+5V
11.V+5V
12.VAGND
13.VAGND
14.V-5V
15.V-5V
16
-8V_IN
-8V_IN
AGND
AGND
AGND
AGND
AGND
+8V_IN
+8V_IN
17
VIDEO -5V
VIDEO +5V
VIDEO GND
VIDEO GND
1.RLY_H/P
2.RLY_SB
3.RLY_S/C
4.RLY_F
5.H/P_R
6.H/P_GND
18
7.H/P_L
I
L
F
A
K
C
H
B
M
E
E
M
D
B
H
G
C
K
A
L
J
I
18
17
16
15
1.MVOL_DATA
22.SWM5V(MX) 2.MVOL_CLK
21.D5V(MX) 3.MX_L
20.KILLIR
19.RC_OUT 4.AGND
18.BT_LINK 5.MX_R
17.FRONT_IRIN 6.AGND
16.RC_IN 7.TU_GPIO2/TUNED
15.MUTE3.3V 8.TU_RST/ST
14.NC 9.TU_SEN
13.NC 10.TU_SDIO/SDA
12.NC 11.TU_SCLK/SCL
14
17.SWM5V(MX) 11.NC
16.D5V(MX) 10.MVOL_DATA
15.M3.3V 9.MVOL_CLK R4454
14.M/DGND 8.M3.3V +8V_IN R4453
13.A+7V 7.M/DGND +8V_IN
12.A+7V 6.A+7V AGND C4448
11.A-7V 5.A+7V AGND
10.A-7V 4.A-7V AGND R4456 +7V
AGND MICDET
R4455
9.KILLIR 3.A-7V
AGND MIC
8.RC_OUT 2.DA+5V MICGND
7.BT_LINK -8V_IN R4459 H/PDET
(FOIL SIDE)
1.DA+5V H/PL
6.FRONT_IRIN -8V_IN H/PGND
C4444
5.RC_IN H/PR
C4443
4.NC
3.MX_L
D4415
D4414
C4452
2.AGND
13
C4451
1.MX_R
D4412
D4413
R4444
H/P
1.MICGND
2.MIC_IN
3.RETGND
4.RETGND
5.DA_SBR
6.DA_SBL
7.DAGND
12
8.DA_SR
9.DA_SL
10.DAGND
11.DA_SW
12.DA_C
13.DAGND
14.DA_FR
15.DA_FL
7.PRE_MUTE 16.DAGND
6.NC 17.A/D_R
5.TU_TUNED 18.DAGND
4.TU_RST/ST 19.A/D_L
3.TU_SEN 20.DAGND
2.TU_SDA 21.DAGND
1.TU_SCL 22.USB_R
23.USB_L
11
31.MICGND
30.MIC_IN 1.NC
29.MICGND
28.NC 2.PRE_MUTE
(COMPONENT SIDE)
27.NC 3.MUTE3.3V
26.NC 4.A+7V
25.RETGND 5.A+7V
24.RETGND 6.A-7V
23.DA_SBR 7.A-7V
22.DAGND 8.RET GND
21.DA_SBL 9.RET GND
20.DAGND
10.M/DGND
19.DA_SR -5V_IN
10
11.TU+5V
18.DAGND
17.DA_SL -5V_IN
VGND
12.RLY+B
16.DAGND 13.RLYGND VGND
15.DA_SW +5V_IN
+5V_IN
14.DAGND
13.DA_C
(FOIL SIDE)
(FOIL SIDE)
12.DAGND N.C.
11.DA_FR
SIDE_CNT
118
REG_CNT
10.DAGND
9.DA_FL
8.DAGND
LUG4401
JACK4401
AGND
AGND
7.A/D_R
RL_GND
TU5V/9V
A+8V
DA_+5V
A-8V
RL_+B
6.DAGND
5.A/D_L
4.DAGND
3.USB_R
2.DAGND
9
1.USB_L
H/P
J4060
C4446
C4449 ZD4406 CP4403
8
7
CP4614
AGND
AGND
RL_GND
TU5V/9V
1.USB_L
A+8V
DA_+5V
A-8V
RL_+B
2.DAGND
3.USB_R
4.DAGND
5.A/D_L
6.DAGND
7.A/D_R
6
8.DAGND
9.DA_FL
10.DAGND BURRING
11.DA_FR
BD4402
VBUS
12.DAGND -DATA
C4440
13.DA_C
BKT4601
+DATA
GND
14.DAGND GND
15.DA_SW 13.RLYGND
16.DAGND 12.RLY+B
(FOIL SIDE)
17.DA_SL 11.TU+5V R4452
C4441
18.DAGND
L1_T4400
19.DA_SR 10.M/DGND
D4411
20.DAGND 9.RET GND
21.DA_SBL 8.RET GND
22.DAGND 7.A-7V
23.DA_SBR 6.A-7V
R4457
R4458
D4627
D4626
D4624
24.RETGND
5
D4625
5.A+7V C4615
25.RETGND 4.A+7V
BD4400
J4652
26.NC 3.MUTE3.3V
BD4401
27.NC
T1.6AL/250V
C4445
CN4600

28.NC 2.PRE_MUTE D4410
USB
D4409
29.MICGND 1.NC
F4601A
CN4602 C4447
F4601
F4601B
30.MIC_IN
31.MICGND
CP4604 23.USB_L
22.USB_R J4609

J4662
21.DAGND J4604
1.TU_SCL 20.DAGND
C4617 C4612 C4614

2.TU_SDA 19.A/D_L
R4605
3.TU_SEN 18.DAGND J4605
4.TU_RST/ST 17.A/D_R
J4691
16.DAGND
4
5.TU_TUNED
6.NC 15.DA_FL
7.PRE_MUTE 14.DA_FR N.C
13.DAGND +5V_IN
12.DA_C D4619
R4606
CN4605
CP4605 11.DA_SW +5V_IN
VGND
D4616
D4617
10.DAGND
J4660
VGND
9.DA_SL D4618 -5V_IN
T1.6AL/250VT1.6AL/250V T1.6AL/250V
J4661
8.DA_SR J4606
-5V_IN
7.DAGND
J4655 6.DA_SBL D4613
F4602A
F4602B
J4603
F4602
5.DA_SBR
J4651
4.RETGND
3.RETGND D4612
J4692
2.MIC_IN
1.MICGND
3
BKT4600
J4602
CN4603
J4607 J4610
11.TU_SCLK/SCL
R4607
(COMPONENT SIDE)
(COMPONENT SIDE)
(COMPONENT SIDE)
10.TU_SDIO/SDA
J4608
9.TU_SEN D4615
8.TU_RST/ST
F4603
F4603A
J4654
F4603B
7.TU_GPIO2/TUNED
CN4601
6.AGND
C4613
D4614
1.MX_R 5.MX_R
J4653
2.AGND 4.AGND
3.MX_L 3.MX_L
4.NC 2.MVOL_CLK
5.RC_IN 1.MVOL_DATA
J4658
J4601
CP4402
Lead-free Solder
R4604
6.FRONT_IRIN 1.DA+5V
2
7.BT_LINK 2.DA+5V
8.RC_OUT
F4600
C4616
J4663
9.KILLIR 3.A-7V
4.A-7V D4621
F4600A
F4600B
10.A-7V 5.A+7V CN4604
11.A-7V
J4659
J4032
6.A+7V
SIDE_CNT
12.A+7V 7.M/DGND D4620
REG_CNT
鉛フリー半田
13.A+7V
J4657
14.M/DGND 8.M3.3V
15.M3.3V 9.MVOL_CLK
A_GND
10.MVOL_DATA
J4693
AC_IN
AC_IN
AC_IN
AC_IN
AC_IN
VGND
16.D5V(MX) 11.NC D4623 -8V_IN
17.SWM5V(MX) 12.NC -8V_IN
13.NC AGND
14.NC D4622
AGND
J4656
15.MUTE3.3V AGND
16.RC_IN
USB
J4033
CN4401
17.FRONT_IRIN AGND
1 AGND
CP4603
CP4602
18.BT_LINK +8V_IN
19.RC_OUT
C4442
20.KILLIR +8V_IN
CP4606 21.D5V(MX)
22.SWM5V(MX)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
FRONT
(COMPONENT SIDE) A
C4406
J4073
ZD4400
J4071
J4007
J4072
J4017
J4044
J4043
J4066
J4062
R4402
J4063
C4404 C4407
VEC4400 J4029
C4419
C4429 CP4400
VEC4401
J4004
J4006
J4013
J4069
J4003 J4026 J4031
J4061
J4049
J4012
J4010
J4059
J4028
D4401 J4067
C4411 J4011 J4025
J4009
RMC4400
C4408
J4064
J4034
ZD4403
J4014
ZD4402
J4016
J4030
CP4401 C4401
J4048
J4041
J4039
J4054
R4430
J4015
J4021
J4035
J4000 J4020
J4040
J4027
LED4400
D4400
J4065
ZD4401 J4070 J4047 C4400
J4019 LED4401
J4005
J4018
J4037
J4008 J4068
C4405 J4002 Q4400 C4418 J4046
U4400 J4036
J4024
J4022
J4023
J4045
J4001 J4076
J4077
ZD4404
ZD4405 C
R G
J4075 SW4402 SW4407
LED4402
J4074
J4052
SW4408
SW4400 SW4406 SW4405 SW4404 SW4401 J4050
J4051
J4053
SW4403
C4438
D
CN4400
F
FRONT
(FOIL SIDE)
G
R4425
C4422 C4433 C4432 R4409
D4407
Q4403
C4402
C4426
R4405
R4408
R4410
C4415
C4421 R4435 FIL2

D4402
R4400 OPEN
D4408
D4404 Q4405
C4425
D4403 FIL1
C4427
C4403
D4406
R4411
OPEN
R4441
R4436
R4440
R4420
C4410
R4443 C4420 -Vkk GND
OPEN
R4401
R4404
R4403
R4428
Q4407
R4419
C4417 R4429 J4055 -Vkk
R4434
R4442
C4409
D4405 R4431 C4430
C4431
C4428
R4460
C4424
R4438
R4437
J4057
Q4404
R4417 F4400
NC
D/MGND
R4432
M3.3V
D/MGND
SWM3.3V
A+7V
A-7V
NC
MICGND
MICGND
MICGND
H/PGND
H/PL
H/PR
FRONT_IRIN
P-DIRECTLED
MICDET
H/PDET
NC(DOORDET)
VSELA
VSELB
MIC
D/MGND
NC
SWM5V(MZ)
POWERKEY
S.BY_RED_LED
FLCLK
FLDATA
NC
NC
KEY1
KEY2
KEY3
ISELA
ISELB
FLCE1
M-DAX_LED
FLRST
S.BY_GRN_LED
Q4401 6125FF500-R
C4423 R4424 F500mAL
Q4402
R4415
C4412
C4413 H
R4418
R4416
C4453
C4454
R4412 R4413
C4416
C4414 Q4406
R4407
R4406
R4414
J4056
R4433
R4422
AZ4580
C4434 R4426 Q4408 G R

C4435 IC4400
R4423
R4439
R4427
C4436 R4421
+7V
R4445
R4446
CLP4400
I
C4437
MICDET R4448
MIC R4447
MICGND
R4451C4439
R4449
R4450
H/PDET
H/PL CLP4401
H/PGND
H/PR
L
鉛フリー半田
Lead-free Solder
M
119
AG AG AG F
N C NDSL ND L
D
AV
CN4204
CN4200
CN4203
CN4202
FR
SR
1
SBL
SBR
AGND
AGND
AGND
D4212 D4220
6.V INA
7.V INB
8.V INC
15.V-5V
14.V-5V
7.H/P_L
11.V+5V
10.V+5V
5.H/P_R
4.RLY_F
9.PSAVE
2.RLY_SB
1.D/MGND
13.VAGND
12.VAGND
D4213 D4221
3.RLY_S/C
1.RLY_H/P
2.NC
6.H/P_GND
鉛フリー半田
3.CVBS_DET
6.CVBS
D4214 D4222
8.VDIPY
10.VDICB
12.VDICR
2.COMP_GDET
11.D/MGND
9.D/MGND
7.D/MGND
5.D/MGND
1.D/MGND
13.D/MGND
3.D/MGND
D4215 D4223
R4262
R4265
R4259
R4261
R4260
R4264
R4263
5.COMPONENT SW2
4.COMPONENT SW1
4.ETHERCVBS
D4211 D4219 13.RLYGND
12.RLY+B
Lead-free Solder
D4210 D4218
2
11.TU+5V
C4218
C4212
C4214
D4209 D4217 10.M/DGND
9.RET GND
8.RET GND
C4242
7.A-7V
6.A-7V
5.A+7V
4.A+7V D4207
C4217
C4215
Q4213 CP4201 3.MUTE3.3V
(COMPONENT SIDE)
C4216
2.PRE_MUTE D4208
C4213
C4211
1.NC
Q4209
R4239
D4206
3
C4221
ZD4200
Q4204 Q4208 MTZ3.6B H/PR
C4228
R4238 R4243
R4237 R4242
R4236 R4241
C4210
H/PGND
H/PL
R2A15218FP
C4209
25
20
5
IC420015
10
RLY_H/P
C4235 R4283 C4219 RLY_SB
R4291 R4219
R4218 RLY_S/C
R4287 C4220
R4221 RLY_F
31
CP4202
C4222 R4220 RL+B
23.USB_L R4223 RL+B
R4222
4
22.USB_RC4223 RLGND
21.DAGND R4225
20.DAGND C4225 NUTE_7V
R4224
Q4200
19.A/D_L LIMIT+
R4354

18.DAGND
17.A/D_R C4224 R4353 R4235
LIMIT-
CN4201
16.DAGND C4227
C4260
C4273
50
15.DA_FL
C4206
14.DA_FR
R4240
13.DAGND
Q4201
12.DA_C C4226 R4312

11.DA_SW
75
55
65
R4202 R4311 R4313
60
70
10.DAGND R4314
9.DA_SL
Q4202
8.DA_SR R4352
7.DAGND R4203
5
C4207 R4351
6.DA_SBL R4206 R4214
5.DA_SBR R4215
R4248
Q4203
R4213
C4274
BD4200
4.RETGND
C4259 IC4201
C4268
BD7628
3.RETGND
R4318
C4266
C4267
2.MIC_IN C4208
R4249
C4232
1.MICGND
R4326
R4327
R4328
R4329
R4330
R4331
C4233
C4231
C4230
C4229
CP4200
IC4202
C4269
11.TU_SCLK/SCL
10.TU_SDIO/SDA
NJM2586M
9.TU_SEN C4264 R4319
C4288 C4287
8.TU_RST/ST
6
7.TU_GPIO2/TUNED R4253 R4252

6.AGND
C4265
5.MX_R R4256
R4308
C4281 4.AGND
IC4203
3.MX_L Q4206
Q4205
C4294
2.MVOL_CLK
Q4207
C4292
R4255 R4254
C4293
TC4051BFTC4262
1.MVOL_DATA
C4254
C4255
C4253
R4257
C4251
L4200
R4274
R4272
PACK4200
R4277
C4290
C4291
JK4208
C4289
R4273Q4210
R4315
R4316
R4317
R4275 Q4211
JK4200 JK4204 JK4206 JK4207 COMP OUT

C4252
C4250
AUDIO_IN
7
R4276 Q4212
Y
Y
Y
C4283 C4282
C4238 C4237 C4236
JK4202 JK4203 JK4205
CB
CB
CB
CR
CR
CR
L4201
C4284
8
9
120
C4275
10
C4248
C4246
C4247
R4284
AV
R4369 D4202
R4341 C4280 C4204
C4203R4367
R4343
R4345
C4245
R4364
D4226
D4203
R4339 C4202 R4298

R4362
R4370 C4239
C4279 R4293
R4368
R4336
R4290
R4334 C4240 R4301

C4278 C4205 R4361 C4241 R4297
R4363 R4286 R4285 D4225 R4300 C4257
R4299
R4289
R4296
R4295
R4288
D4224
R4335
D4205
R4347
D4204
R4338 D4200
C4286 C4277 R4304
R4302
C4258
D4201
C4201
R4303
R4294
R4337 C4256
11
R4340 R4357
(FOIL SIDE)
R4282
R4281
R4280
R4342 R4358 C4200

R4355
C4276
R4292
R4356
R4360
R4344
R4359
R4333 R4200
R4372
R4365
R4332 R4366 R4371

R4251 R4244
R4346
C4285 R4201
12
R4245
R4246
C4261
R4375 R4348
C4271
C4263
R4349 R4350
R4376 R4323 C4272

R4234
R4205
R4322
R4250
R4204
R4325
R4324
13
R4321 R4310
R4232 R4233 R4320 R4309
R4209
R4210
C4270
R4211
R4373
R4212
R4374
R4230 R4231
C4295
R4229 R4228
14
R4227 R4226
R4268
R4267
R4269
R4217 R4216
C4296
R4270
R4258
R4271
15
D4216
R4278 C4234 R4279

R4266
R4247
C4244
C4243
16
C4249
17
18
L
F
A
K
C
H
B
M
E
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
HDMI
(COMPONENT SIDE) A
N3404 N3402 N3401
4 FRONT_RLY
N3601 N3409
6 H/P_GND
3 C/S_RLY
1 H/P_RLY
2 SB_RLY
DIP C/S
5 H/P_R
7 H/P_L
1 1 13 1
7 9
4 ETHERCVBS
1
1 MAIN_PWR
C3801
5 COMP_SW2
4 COMP_SW1
13 D/MGND
C2465
11 D/MGND
R2489 C2473
4 RADI_THERMAL
9 D/MGND
7 D/MGND
5 D/MGND
3 D/MGND
1 D/MGND
C3799 CLP1001
12 VDICR
10 VDICB
3 DGND
2 DGND
5 D5.2V
4 D5.2V
5 TR_THERMAL
8 VDIPY
1 D/MGND
6 CVBS
R2418 C2455 R2417
R2470
R2453
R2454
R2445
R2435
R2469
8 V_IN_C
7 V_IN_B
6 V_IN_A
9 PSAVE
2 NC
3 ASO_DET
2 DC_DET3
1 DC_DET4
C3755
R2101 R2001 L3628
R2471
C3750
C2409
R2472
R2456
R2455
R2446
R2436
C3811 C3810 C3813
3 NC
2 NC
C2433
R2408
R2415 C2454 R2416 C3758 L3627 N1301
C3745
L3626
B
C2024
C3730
C3748
R2490 C2474 C2466
R2019
N2001
R2020
R2120
C2033
C2030
23 C3818
ADSP21487KSWZ-3B
C2407 C3791
R2025
R2024
U2402
C2050
R2026
R2028
R2027
U2001 C3726
R2030
C3753
L3609
C2046
C2002
C2041
C2408
R2409
R2016 L3610
N3405
C2482 R2017 R2048 R2119
C2487
C2434
R2006 R2049 C3605
N3403
U2406 10 1
C3623
C2464 R3611
C2481 R2007 C2004 C3802 C3812 R3605
N2401 R2003
C2485
C2006 C3629
R3234
C3216
C2403
C3627
C2421 R2002 R3630
R3235
C3603 C3761
R3252
C3211
R1358
R3224
Q3206
R3253
R1312
R3254
C3816
C3742
C3633
C2438 C2406
C3817
R3223 R2103 R3629 R3609 C3819
C2426
Q3220
R2411 C2412
R2104
C3641
C3647
C3789 C3651
R3633 R3634
C3653 R3641
R2011 C2089 R2031 R3639
R3694
R3693
R3692
R3691
R3690
R3689
R3688
R3687
C2076 R2033 U3603
C2457
R2422
R2421
L3606
R2105
L3605
Q3205
R2106 R2029 C2088 C3639 U3605
L3622
L3621
C2401 C3214 R2107 R2035 C3621
R2501
R3236
C2489
C2013 -
C3210 L3617 C3659
U2401
R3225 R3221 R3255

R2438
R3237
R2475
R2476
R2460
R2459
R2448
Q3212
Q3213 R3220 C2090 C3606 C3763
C3630
C2078 R3612 -
C1384
C2446
C1371
C1374
L3618 R3636 C3636
C1376
C1379
C1380
C1382
C1383
C2418 R3239
EN29LV160BB
Q3204 C2080
C2082 R3635 C3820 C3665
C
U2003
R3219 Q3211
C2447
R3226 R3222
C3654
Q3215
C3692
C2475 C2476
C2467 C2468
R2491 R2492
R2407
Pb
C3723 R3642
C2437
R2410
C3725
C3703 C3694
R2406 C3023 C2091
U2407
L3611
C2402 U3606
Q3209
R3229
R3232
R2405 R3081 R3080 R2116
U3004
R3227 R2115
C2427
C2428
C2450 C2451 R3062 C3025 C3024 L3612

C2449 R3241 L3623 R2255
L3403 R3075 R2254
R3073
C
R3074
L3624 C3624 C3642
R3063
R3070
C3020
R3061
R3060 R3064 C2092 R2253
R3069
C3409
R2437
C3415 C3019 C3022 R2042 R3625 R3626 C3601 C3765 R2252

C2425
C2424
C2422
IN ICT OP ADJ FI
R2265
R3607
C3783
R2500 R2112 R2114 C3649
C3675
2 40 R2043 C2233
R2499
R2277 R2046
C2106
C2104 R2044
C2107 R2108
C3625
R2018
C2095
R3656
N3408 R3637 C3631
C3405 C3418
R2040 C2094 R2109 R2110
C3736
Q3603
R2111
C2093 Q3602
1 39 C2225 U3601
L3401
Q3610
R2251
R2250
R2021 R2022
C3699
R2256 C2224 C3688
C2039 C2044 Q3601 R3650
L3601
C3674
R2278
C3407 C3416
C2404
L3602
R2257
C3411 C3414
C2222
R2231
L3613
R2276
X2001 R3651
R2228
R2258
R2229
R2230
R2232
C2486
R2233
C2488 R2245 R3655
C3737
D
C3787
L3614
L3402
L3404
C2223
U2206 C3764 R1637
R3027
R3028
R3025
R2259
R3017
R3018
C2221
C3762
R2225
R2244
C2220
C3009
C3012
C3637
R3023
R3024
C3619
R3030
R3031
C3011 TC74VHCT244AFT R2260 R3654 C3673

D2401
C3010
C3698
R3402 1 7 R2269 R3649
R2473
R2474
R2447
R2458
R3026 R3657
R2457
R2248
R2249
R2243
R2241
C2212
R2224
R2242
R2240
R2270
C2213
Q1606
X2201
R3029
R3403 D3401 R3652 R1409 R1408 Q3609

E
R2273 N2201
C3695
C3734
C2214
R3404
R3068
R3065
R2419 R2420 Q3004 R2246

NR1603 HDMI PCB LPP
C1320 C1319
C1316 C1315
C1317 C1314
C1318 C1321
C1515
Q3625
C3774
Q3621
Q3615
C2456 R3668 Q3604 Q3608 R1638
R2247
R3405 C2210 C1032
R2271
R2272
Q3611
C3717 L3603
R2274
C3676
-
R3608
C3602
N3406 R3663 R3675
7020-07201-020-0S
R2808
R2859
R2860
R2810
C2803
L2815 R2853
U1304
L3604
LC89058W-E
-
Q3619
C3690
I O
R2807
G
C1471
C3681 R3670
L2814 R2852
C3700
C1493
R2223
C2211
C2032
C2043
R2275
U2203
C3752
C3410
C2209
C3620
L2813 R2851 R2220 C3626
C2230
C3420
R3632
R3095
C3634
U3607
C1483
C1826
C3628
C1473
L1801
R1819
R1818
C1852
L2812 L2811
C1853
C2853
C3632
R2863
C3413 R3083
C1499
R1306 R1315
U2803 R2813
R2812
R2826
R2824
R2822
C2812
C3728
5 GND C2805
C2804
C3689
C3685
C2669
C3417 R3034 C2208 C3604 R1308 R1320

R3046
C1807
R3206
C3202
C3412 R3096 R3631 R1307
L3607 R3638
R3045 R1319 - C1716
-
U2205
C3638
R2858
C3686
R3610
U2207
R2809
C3419 C2828 C2218 C2811 C3652 R1302 R1310
D R2261
R2208
R2209
U2806
R3043
R2201
C3408
SAA7121H
C2205
R1309
4 GND
R3042 C R2262 R1314

1 +5V
C3421 C3804 C2806

-
3 D+
R3680 R1301 R1305 C3720
C2629
C2234
C2672
2 D-
R3037
R3640
R2263 - C1854
R1654
R1405
R3100
C3406 N2801 L2804 R2861 C2232 R2264
R1642
C2239
U3604
R3212
E
R3051
U3602
C1486 R1347
L2805 R2806
C3744
L2803 R2805
-
N
R
P
C3014
R3628
C3422 R1682
-
C1833
H
G
D
C
B
R3076
C1802
E
F
C1696
C3768
M
C3015 C3016
L3616
K
L
J
C1305
L3615
C1801
C1605
R2266
R1693
R1694
C2238
L1602
C3401 C3207 R2818 C1490 R1348 R1406
C2826
C3712
R1417
R1414
R1415
- R2268 L3608
Q3617
C3402 R3213 R2819 C1387
Q2601
1 2 3
Q2602
R2602
R3627
X3001
C2627
C2668
C3672 L3619 R1684
C1729
C3650
R3039
R3012 R3210 - C1393 R1352
C3724
R3059 U3002 R2617 Q3626 R1807
C2235
C2236
D
C
B
R2607 R2707
E
F
A
L2806
-
R3401 R1719
R1667
R3660
R1351 R1645
R3662
C3622 R1809
R2705
R2701
R2704
R3666
R3673
R3058 L3620 C1304 - C1508 R1679 R1646

R2614
AC
AB
AA
R3057 C2825 Q3614 R1811
M
R3050
H
R
P
G
Y
V
L
T
J
C2810 C1303 R1632
U3201
N2602
7 8 9
R2267
R1668
Q3607 R1813
R3647
C3640
AC 1 O I
R3682 C2814 1 C1302 R1683 2
-
R1817
R2635
R2721
AB
C3018
6 R3676 C1311
C2809
U3608
AA 3 G
R3683 C2813 C2678 C3697 R3669 C1309
Y
R1815 U1802
4 R1695 -
C3017
C2625
C3203
C3204
C3806 R1666 5
R2845
W
C2832
R2846
C1310 R1681 -
L2601
C3792 V
K4T51163QJ 6
C2824 Q3606 Q3620 U 7
C3727
-
C3797 R3679
R3648
Q3627
C3701
T
R1689
R3658 R3653
9
C1034 C1312 R1338 -
R2834
R2831
R
C2827
C2624 10
R2849
R1360
P
N3407 R1403
R3659
-
R3661
C1517
R2709 R2713
C1503
C2833
ADV8002-4
11
R1625
U1601
Q3613
N
X1601
C2626 C3696 R1404 R1357 R1687 12
-
R1349 C1500
M
R2711
R3681 C1509 13
-
L
R3665 R2613 C1510 R1344 14
C1702 C1703
K
D3601 R3678 R2608 - U1001
J
R1686
- U1603
R3677 D3602
R3672
H
ADV3002BSTZ U1801
U2601 C2823
C2822
L2808
L1617 - 17
U2603
X1301
R1652
R1651
G
C3795 C1512 K4T51163QJ 18
C1834
F
Q3007
R2609 Q3612 19
E
C1511 - R1678 -
M
N
H
R
P
D
C
B
E
F
A
L
J
D 20
C3677
R2214
Q3008
R1626
F
C 21
R2213 R1353 R1633
R3019
L1607
1 2 3
D R2611 R1806
B
R3085
R3087
R1650
R1649
R2212 C1504 C1505 C1506 R1673
A
R2603 C1507 R1808 C1688 C3822
23
22
R2610 R2215 C1501 C1712 R1643 R1624
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
C3790 U2802 R2717 R2646 R2644 R2219 C1502 R1810 R1677 C1713 C1686 C1687 L1615 C3756
R3033 U1302
L2809
N3001 C3788 R2643 R3209 R3208 A R1812 C1640

R2216
N1601
C1378 C1375 ADV7850 R1623 R1644
7 8 9
R2218
R3207
R3032 L2810
L1619
R2720 R2649 R2648 B C3205 R3211 R1410 R1411 R1814 R1676
C1707
L1608
R3090
R3097
R3094
R3092
R3088
R3086
R3084
R3099
C2656
C2821
C2820
R3098
R2631 C2655
1 7 R1816 C3823
C1363
R2629 R3695
C2816
R3020
R2802
R3021 E U2602
C1372
A R3696 R1311 R1675
L1618
L1616
L1610
L1606
C1360
C1808 R1820
C1368
R3022 -
R2620
DM860A R3697 R1316 C3767

L2807
R2830 R2829 R2833 R2832 C1637

R2615
C2817
N2601
- R3698 D1301 R1304 C1658 C1714
C2807 C2808 L1605 L1613
C3008
C2818
C2819
R2211
-
-
OUT G VCC
R3066
R2632
R2626
R2622
R2630
R2627
R3699 R1328 D1302

R2628
C2604
R2624
L2801
R2616
C3702
R2803
R3701
L2802
C1366
C3007
U3001
R2205
R2623
C2215
R2625
D1303 R1330
R3067 Q3005
R3700
-
-
N3002
C1652
-
1 11 R2207 R2236 1 C1365 R3702 C1719
D3005
R3010
D1304 R1329
R2650
R1700
C2659
B 7
R2234
R2239
C3708 U2204 R2237 D2802 D2801 D2804 D2803 A L1609

R2647
R2210
R2639
R2645
R3204
R2640
C2207 R2206 R2601 - - R1332 R1317 U1604 R1699
R1004
R1016
R1012
C2206 Q1301
R1003
R1015
R1011
D1307 D1308 D1311 D1312
R1729
R1006
R1014
R1010
C2202
R1731
R1002
R1732
R1730
L1622
C3201
L1625
L1624
L1623
Z3001 R2204 Q3202 R3203 D1615
R1039
R2652 R2651
R1040
- R1701
D3001
R1007 R1008
R2801
C2201 D1305 D1306 D1309 D1310
-
R1724
R1722
R1720
R1043
R1715
D3201 R1037
Q1302
Q3003 R2221 R1041
Q3006 R3079 D2201 R2203 R1038
K3002 D3006
R1044
R2202
U2201
C2204
C3404
Q1006
R3001
R1042
R3002
C1718
D2202
Q1004 Q1008
Q1003 Q1007
K2201 K2202 N1002 N1003 N1004 R1653 D1605 D1606 D1609 D1610
R1647
C3423 -
C3693
D3004 C2203 D1611 D1603 D1604 D1607 D1608

C3403
G
Q1001
N2802
Q1005
R1713
R1709
R1705
R1707
R1711
N1001
R1721
R1723
R1717
R3011
4
42
D1601 R1641
C3005
C3006
C3
Q3002 - D1602 R1648

R3215
R3216
R3217
C3001
R1725
R3003
R1001 -
Q3001
R3004
-
R3005
D3002
-
D3003
-
C3704
C3003
C3002
U2202
C3004
R3009
Q1002
R1005
C1705
C1706
R1013
R1009
R1726
N3201 -
K3001 N1302 - N1602
L
鉛フリー半田
Lead-free Solder
M
121
C3821
C1695
1
HDMI
C1668
C1633
C1679
C1645
C1636
C1634 C1680 C1682
C1635 C1681 C1683
C1670
R1660
R1618
C1667
R1640
R1621
C1689 C1674 C1715
R1639
鉛フリー半田
R1617
C1654
C1672 C1656
C1647 R1662
R1634
C1619 C1621 C1613 C1615
C1693 R1631
C1701
C1649
C1727
C1731
C1692 R1630 R1691
C1691 R1629 R1622
R1627
C1678
(FOIL SIDE)
C1690 R1628
C1676
C1677
R1692 C1607
C1 C1675
6 C1673
Lead-free Solder
C1639
C1669
C1643
2
C1 23
63
C1657
2
R1619
R1615
C1684
C1655
C1700
C1721 L1614
C1663
C1631 C1629
C1709 C1625
C1661 C1644 C3759
C1659
C1651
C1697 C1694
C3766 C1671
C1606
C1662
C1627
C1664
C1704
R1620
C1611
C1612
C1616
C1608
C1624
C1610
C1620
C1617 C1626
C1618
C1630
C1622
C1609
C1628
R1669
R1670
L1620
L1611
C1685
C1711
C1614 C1730
R1664
R1665
R1685
R1688
R1663
D1614
C1653
L1621
D1613
3
C1844
D1612 C1660 C1806
C1698 C1699
C1642 C1710
C1841
C1839
L1612
C1837 C1843
C1809 C1819 C1818
C1842 C1816 C1817
C1850 C1849 C1825 C1824
C1838 C1805 C1815
R1821
C1840 C1813
C1835 C1810 C1811
C1848 C1836 R1805 C1823
C1847 C1814
C1812
C1821
C1846
C1820
C1822
C1851
R1822
C1845
C1803
C1465
C1459
C1337
C1335 C1449
C1329 C1454
C1323 C1331
C1827 C3780
C1313
4
C1830
C1832
C1831
C1444
C1804 C1439
C1325
C1829
C1828
C1434

R1635 C1429
R1661 U1303 C1516
C1467
R1659 TC74VHC244FT C1446
C3770 C1456
R1340
R1337
R1339
C1461
R1407
C3769
U1602
C1478
C1424 C1415
C1666 R1656
C1665 R1636
MX25L6406EM2I-12G
R1728 C1419
C1036

R1336 R1412
C1475 C1327 C1441
C1468 C1333 R1346
R1341
R1402 R1401
C3778
R1727
R1657
R1674
C1401 C1395
C1345
C1435 C1430
C1452
C1351
5
C1339
C1440 C1411 R1324
C3776
C1350
R1333
C1358 R1418
C1364
R1325
C1447
C1469
C1410
C1341 C3779
R1326 C1487
R1416
C1491
R1327
C1480 C1484
R1413
C1458 C1476 C3781 L1302
C1453 C3777 L1303
C1513
C1448 L1304
C1418 L1305
C1462 R1343
R1342
C3784
R1419
R3623
C3617
C3786 L1307
L1312 C3773
L1306
R1359
C1457 R1323 R1322
C1420
C3684
L1309 C3635
C1460 L1310
6
C1425 C1361 C1489 L1308

C1474
C1451
C1455 C1407 C1494 C1037

C3611
R3617
C1514
C1450 C1402 L1313
C1431
C1421
C1416 R1354 L1311

C1470 C1336 C1330
C1385
C3814
C1377
C1445 C1463 C1342 C1396 C1306 R1350

C1370 C1308 C1496 L1301
R1345
C1391 C1373 C1369
C1443
C1477
C1307
C1485
C1481
C1488
C1492
C1388 C1324 C1367 C1398
C1381
R1356
R1355
C1497
C1466
R1321
D1313
C1301 C1479
C1472
C3775
R1318 Q1303 C3772

R1313 C1482
C1038
R1331
C1498
R1303 C1412
R1334 C3656
C3644 C1495
U1301 Q1304 C1362 C3771
TC74VHC4051AFT C1464
R1335
C1023
C3662
C3785
R1030
R1029
Q1305
7
Q2201
R1026
R1027
C1006 R3614 C3608
R3620
C1008
C1010
R1018
C3680
R3602
R1033 C3614
C1002 R1031
C1001 C1033
C1013
C1004
R1017 C1025 C1016

R3601 R3606
5
D1001
C1012 R3604 R3603
C1035
R1023 C1007
C3645
C3612
Q1009
C3607
R3613
C3609
C3610
R1022
C3613
R1021
C3616
C3615
C3618
C3643
R1020 5 D5.2V
C3648
C3646
R1019 R1036 4 D5.2V

C1031
C3667
R1035
C3666
3 DGND
R3616
L3625
C1011
R1028
C1014
C1003
R3621
C1015
R3619
R1025
R3622
R3624
R1024
C1027 C3782 2 DGND

C3655
R1034
C1005
C1029 C3658 C3682 1 MAIN_PWR
R3615 C3657
R3618 C3660
Q3605
C3661
C3678
1
C3663
C3668 C2015
C3664 C3669
8
R3646
R1032
1
C1009 R3643
C2606 R3103 C3705 1 D/MGND
C2079
C3733
C3671
R3644
2 NC
C2675
C2608
C2660 U2604
R3645
C2085
C2114
C2652
U2605
C2031
C2081
3 D/MGND
C2658
A3V56S30FTP-G6 A3V56S30FTP-G6 4 ETHERCVBS

R2036
C2027
C2029
C2071
C3741 C2062
R3102
5 D/MGND
C2228
C2086
C2054
C2066
C2653
R2039
R2032
6 CVBS
C2087
R2113
R2034
C2058
C2048
C2057
7 D/MGND
C2097
C2072
C2670
C2056 8 VDIPY
C2679
C2654
C2014 C2064 C2065 C2073 9 D/MGND

C2630
C3739 C2040
C2051 C2042 10 VDICB
C2049 C2060
C2009
11 D/MGND
C2017
C2007
C2008
C3757
C2665 C2047 C2053

13
C2083
C3751
C2061 12 VDICR
C3746 C2035
C2664
C3743
C2103 R2037 C2037 C3754 C2059 R2023

R2038
C2666 R2010
C2055
9
C2231 R2009 C2034 C2084

C2674
C2019 C2038
C2667
S/S
Q2202 C2021 C2075

C2676
C3760
C2020 R2015 C2036

C3749
C2069
C2677 C2028 C2045

C3711
C2067
C2025
C2068
C2077 C2063
R2716 C2012
C2680
C2070
C2026 R2045
C2628
R2715 R2714 C2023 C2011 C3747 C2022

R2718 C2661
C2216
R2235 R2004
R2719
C2662 R2014
R2008
C2003
C2671
C2001
C2663 R2636 R2013

R2005
C2619
C2010
R2638
R2012
C2005
122
C3713
R2226 R2604 C2016 C2018

C2052
C2651
R2712
Q2002
Q2001
R2217 R2710 R2706 R2041

C2105
C2098
C2099
C2096
C2101
C2100
C2622
C2102
C2610
C2635
C2633
R2703
R2641
C3715
C2618
R2222
C2642
R2238
C2615
C2115
C2217
C2616
R2637 C2634
R2642 C2614
C2601
R2708
R2118
1
10
R2634
C2113
C2108
U2002
1 D/MGND
R2817 C3679
C2632 C2643
R2702 C2612
2 NC
R2606
W9864G6JH-6
R2605
R2618
C2621 C2638
C2637 C2623
R2619
C2074
R2117
C2219 R2227 3 NC
C2613 L2603 4 COMP_SW1
C3718
R2633 5 COMP_SW2
R2621 C2650 C2673
R2047 C2111 C2110 6 V_IN_A
C2602
C2603
X2601 C3732 C2112 C2109 7 V_IN_B
C2649
C2641
C2631
C2648
C2841
C3738 C3740
C2640 8 V_IN_C
C3722
R2612
C2609
9
C2639 C2620 C2617 C2636 9 PSAVE

C3691
R2653 R3240
C2644 C3687 R2654 C2226 C3729 C3735
R2837
Q3210
C2611
C2647 R3233
R3231
C2836
C2646 C2834
C2607
R2836
R2838
R2835
C2237 C2645 C3716

C3683
C2835
Q2803
R2848
R2847
1
L2602 R3238
C2829 R2839 1 H/P_RLY
U2804
R2816
Q3214
R2815 R2814
R2844
11
2 SB_RLY
C2657
C2830
C2840
R2843
Q3207
C2839
R3228
C2831
C3212
R2842 Q3208 3 C/S_RLY

4 FRONT_RLY
C3213 R3230
R2841 Q3216
C3719
R2825 R3244
R2840
5 H/P_R
R3243 6 H/P_GND
R2857
R2856 Q3218 Q3217 R3246

R2855
R2850 7 H/P_L
7
C2838 R3251
C2801
C3215
C2815
R2820
R2827
R2828
R2823
C2837 R3248
R3249 R3242
C2842
C2802
C2843
C2844
U2805 Q3219 R3245

R2854 R3250 R3247 1 860_L
R2413
C3670
C2846
C3707
C3793 R2432 2 DAGND

C3714
C2845 C2416
R2431 C2419 3 860_R
C3721
R3684
C2445
C2605
C2847 C2848 C2849 C2444 4 DAGND

Q3203
R2403
R2443
R2485
C2850 C2851 C2852 C2443 5 A/D_L

Q3628 R3202 C2442 6 DAGND
R3686 C2441
R3685
7 A/D_R
Q3623
C3809 Q3201
C2429
C2430
C2431
C2432
C2435
C2436
C2439
C2440
U2403
3 TU_SEN
12
8 DAGND
6 MUTE_Z2
C2414
4 TU_RST/ST
7 PRE_MUTE
R3201 9 DA_FL
C3731
C3798
2 TU_SDIO/SDA
1 TU_SCLK/SCL
R3205 R2404 10 DAGND

C2420
C2411 C2417
11 DA_FR
5 TU_GPIO2/TUNED
C2452
R3054
R3049
R3052
R3047
R3101 12 DAGND
R3007 C2423
U2404
AK4358VQ
R2414 13 DA_C
C3013
R3082
R3035
R2401
C2405
R2402
R3044
R2433 14 DAGND
C3805
R2434
C3706
C2415 15 DA_SW
C3800
R3040
R3041
R3036
R3038
R3048
16 DAGND
C3794
R3077
R3006
R3071 C3425 R2451 R2412 17 DA_SL

Q3622
U2405
C3803
R3072 R2441 C2448 18 DAGND

C2462
R3089
R2466 19 DA_SR
R3078
C2483 C2484
R3091
C2471 C2479
R3093
R2502
20 DAGND
R2503
R2465
R2486
R2425
23 NC
C3206
R3008
R2482 21 DA_SBL
R2862
C3208
C3808 C2459 R2497 R2440 R2498

16 RC_IN
R2450
U3203
20 KILLIR
R3671 C3807 R2481 22 DAGND

R2428 C2460 R2427
R2426
18 BT_LINK
21 D5V(MX)
19 RC_OUT
R3664 R2495 R2463 23 DA_SBR

TC74VHC08FT
15 MUTE3.3V
C2453 C2463 R2488
R2444
R2487
13
Q3616
22 SWM5V(MX)
24 DAGND
17 FRONT_IRIN
C3209
U2408
14 REMOTE3.3V
Q3624
25 RETGND
Q3618
R3218
R3016
26 NC
R3214
R3674 R2424
R3667 C2458 27 NC
R2423 28 NC
U3003
C3710
U3202
11 TRG1
C2413 U2409 29 MICGND

13 232OMI
12 232IMO
R2452 R2464 30 MIC_IN

C3796
C2470 C2469
9 MVOL_CLK
R3015
C3709
C3021
R2439
R2429
5
R3014
31 MICGND
R3013
R2442 R2480 C2477

15
10 MVOL_DATA
C2478
15
R2449 C2410
25
R2467 R2479 R2494 R2493

1
23
TC74VHCT244AFT
5
1
31
1
R2468 R2462
7
R3056 4 A_-7V
3 A_-7V
R2483
8 M3.3V
R3053 6 A_+7V
R3055 5 A_+7V
R2461
2 DA_+5V
1 DA_+5V
7 M/DGND
R2484 R2478
C2472 C2480 R2496
R2477
C2461 R2430
30
20
10
20
10
14
15
ZD1008 ZD1008
C1175 C1175
C1182
C1185
C1182
C1185
C1179
C1179
C1184
C1167
C1184
C1167
C1183
C1183
C1163 C1163
FRONT
FRONT
C1178 C1178
C1164 C1164
16
C1181 C1181
FB1017 FB1017
C1166
C1180
C1165
C1166
C1180
C1165
(FOIL SIDE)
FB1018 FB1018
C1174 C1172 C1174 C1172
C1177 C1177
R1065 C1171 R1065 C1171
C1173 C1173
C1169 C1169
C1170 C1170
17
(COMPONENT SIDE)
18
L
F
A
K
C
H
B
M
E
1 2 3 4 5 6 7 8
HDMI SW
CEC_COM ADV3002 A
RXC_5V
N1001
AD3PBI19G0-REV.B R1001 R1005 R1009 R1013
1K 10K 47K OPEN
9 10 11 12 13 14 15 16 17 18 19
HP_DET
+5V
GND
DDC_SDA Q1001
RT1N141C
DDC_SCK Q1005
RT1N441C
N.C
HDMI_IN1
CE_REMOTE
TXC-
TXC_SHLD
TXC+
TX0-
TX0_SHLD
8
TX0+
7
TX1-
6
TX1_SHLD
5
TX1+
4
TX2- CEC5V
3
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
TX2_SHLD
2
TX2+
1
R1037 R1038
C1032
C1033
C1034
C1035
C1036
C1037
C1038
10K OPEN
DGND
RXE_5V
N1002 R1002 R1006 R1010 R1014
AD3PBI19G0-REV.B 1K 10K 47K OPEN
CEC3.3V
9 10 11 12 13 14 15 16 17 18 19
HP_DET
1N-K
1N-K
1N-K
1N-K
1N-K
+5V
GND
C1023
C1025
C1027
C1029
C1031
DDC_SDA Q1002
RT1N141C
DDC_SCK Q1006 R1024 4K7 DGND
RT1N441C
N.C
HDMI_IN2
R1025 4K7
CE_REMOTE
TXC-
TXC_SHLD
TXC+
TX0-
TX0_SHLD
8
100N-K
100N-K
4.7U(1608)
TX0+
7
4K7
TX1-
6
OPEN
OPEN
OPEN
OPEN
OPEN
TX1_SHLD
5
C1003
R1028
C1005
TX1+
4
C1010
C1011
C1012
C1013
C1014
C1015
TX2-
3
C1009
TX2_SHLD
2
OPEN
TX2+
1
INEDATA2+
INEDATA2-
INEDATA1+
INEDATA1-
INEDATA0+
INEDATA0-
INHDATA2+
INHDATA2-
INHDATA1+
INHDATA1-
INHDATA0+
INHDATA0-
60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41
I2C_ADDR0
INECLK+
INECLK-
DDCC_SCL R1017 2K2
AVCC
AVEE
AVCC
HPD_E
HPD_H
R1039 R1040 R1019 10K 61 40 R1034 33 HSDA
10K OPEN DDCC_SDA R1018 2K2
R1020 10K 62 39
C1001
C1002
R1021 10K R1032
OPEN
OPEN
63 38 4K7 R1035
64 AMUXVCC 61:EDID_SCL 40:I2C_SDA INHCLK- 37 OPEN
R1022 OPEN 62:EDID_SDA 39:I2C_ADDR1
D1001 65 CEC_OUT 63:EDID_ENABLE 38:INHCLK+ RESETB36
LRB521S-30 R1023 OPEN 66 CEC_IN OUTCLK-35 RXC_C- R1036
67 DDC_SCL_COM OUTCLK+34 RXC_C+ 1K
RXF_5V
1N-K
N1003 68 DDC_SDA_COM AVCC 33 C1007 100N-K
AD3PBI19G0-REV.B R1003 R1007 R1011 R1015
1K 10K 47K OPEN 69 DDC_SCL_H U1001 OUTDATA0-32 RXC_0- ADV3002_RST
C1016
70 DDC_SDA_H ADV3002BSTZ OUTDATA0+31 RXC_0+ Q1009
9 10 11 12 13 14 15 16 17 18 19
HP_DET 71 DDC_SCL_E DEVICE ADDRESS : 0x90 AVEE 30 OPEN

+5V 72 DDC_SDA_E OUTDATA1-29 C1008 OPEN RXC_1-
GND 73 DDC_SCL_F OUTDATA1+28 RXC_1+
DDC_SDA Q1003
RT1N141C 74 DDC_SDA_F I2C_SCL27 R1033 33 HSCL
DDC_SCK Q1007 75 DDC_SCL_G 78:P5V_E
RT1N441C 23:INGDATA2+OUTDATA2-26 RXC_2-
N.C
HDMI_IN3
76 DDC_SDA_G 79:P5V_F 22:INGDATA2-OUTDATA2+25 RXC_2+

CE_REMOTE 77 P5V_H 80:P5V_G 21:AVEE TX_EN 24 R1031 4K7
INFDATA0-
INFDATA0+
INFDATA1-
INFDATA1+
INFDATA2-
INFDATA2+
INGDATA0-
INGDATA0+
INGDATA1-
INGDATA1+
TXC-
D
INFCLK-
INFCLK+
INGCLK-
INGCLK+
78 23
TXC_SHLD
HPD_F
HPD_G
79 22
AVCC
SEL0
SEL1
AVCC
TXC+ 80 21
A
TO BH
TX0-
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
TX0_SHLD
8
TX0+
7
TX1- FROM
6
RESETB
100N-K
100N-K
4K7
4K7
TX1_SHLD D.SUPPLY
5
TX1+
4
TX2-
3
C1004
R1029
R1030
C1006
TX2_SHLD
2
TX2+ B
1
R1041 R1042
10K OPEN
TO G
DGND
CEC3.3V
4K7
4K7
RXG_5V CEC5V
HPD5V
N1004 HSCL
R1026
R1027
AD3PBI19G0-REV.B R1004 R1008 R1012 R1016

1K 10K 47K OPEN HSDA
ADV3002_RST
9 10 11 12 13 14 15 16 17 18 19
HP_DET
+5V CEC_COM
GND
DDC_SDA Q1004
RT1N141C
DDC_SCK
N.C
Q1008
RT1N441C DDCC_SDA E
HDMI_IN4
CE_REMOTE DDCC_SCL
TXC-
TXC_SHLD RXC_C-
TO
TXC+ RXC_C+ HDMI RX
TX0- RXC_0-
TX0_SHLD RXC_0+ ADV7850
8
TX0+ RXC_1-
7
TX1- RXC_1+
6
TX1_SHLD RXC_2-
5
TX1+ RXC_2+
4
TX2-
3
TX2_SHLD C
2
TO H
TX2+
1
RXC_5V
R1043 R1044 RXE_5V
10K OPEN
RXF_5V
RXG_5V
F
SCHEMATIC DIAGRAMS (1/26)
GND POWER + POWER - STBY POWER
HDMI SW UNIT
123
1 2 3 4 5 6 7 8
R1201 R1203 R1205 R1206

FRONT HDMI
OPEN
R1202
0
OPEN 47K OPEN
B
TX_EN.
DDC_SCL
DDC_SDA
R1204
0
N1201
AD3PBI19G0-REV.B
Q1201
OPEN HPA_D..
9 10 11 12 13 14 15 16 17 18 19
HP_DET
Q1202
+5V OPEN
GND
DDC_SDA
N1202
FRONT_HDMI
DDC_SCK N1202
N.C FFC-23P (1.0-16-23PB-2)
CE_REMOTE CEC
23
CEC CEC
TO N1301
TXC- R1207 R1208
22
HPA_D.. HPDF
TXC_SHLD 0 0
21
TX_EN. TX_EN
TXC+
20
DDC_SDA DDCA_SDA
TX0-
10/6.3(X5R)
19
DDC_SCL DDCA_SCL
TX0_SHLD
OPEN
OPEN
OPEN
OPEN
8
2K2
2K2
L1202 0(2012).HDMI5V
18
TX0+ HDMI5V
7
L1203 0(2012) .CEC5V
17
TX1- CEC5V
6
R1210
R1211
16
C1219
C1220
C1221
C1222
C1223
TX1_SHLD CEC3.3V
5
L1201 0(2012).CEC3.3V
TO
15
TX1+ CEC3.3V
4
14
DGND2 DGND
TX2-
3
HDMI RX
13
TX2_SHLD DGND
2
100N-K
12
RX_C-
ADV7850
OPEN
OPEN
TX2+ RX_C-
1
11
RX_C+
0
0
RX_C+
10
DGND
10K
R1209
R1212
R1213
C1205
R1214
D1202
D1203
RX_0-
9
RX_0-
OPEN
OPEN
D1201
OPEN(1608) RX_0+
8
RX_0+
R1045
OPEN
7
DGND
RX_1-
SCL_IN 40
SDA_IN 39
CEC_IN 38
AVEE 37
VREF_IN 36
SCL_OUT 35
SDA_OUT 34
VREF_OUT 33
32
31
6
C1206 RX_1-
R1216
100N-K RX_1+
5
RX_1+
21 22 23 24 25 26 27 28 29 30
1
IN0 AVCC
4
DGND
2
IP0 PE_EN RX_2-
3
RX_2-
3
IN1 TX_EN
10N-K
RX_2+
2
RX_2+
OPEN
41
4
IP1 AVEE
1
DGND
0
C1201 100N-K
5
VTTI U1201 AVCC
6
IN2 AD8195ACPZ AVCC
C1210
R1215
R1217
C1207
100N-K
7
IP2 AVEE
8
IN3 AVCC
31 : CEC_OUT AVCC C1208
10 9
IP3 32 : AMUXVCC 10/6.3(X5R)
COMP
13 VTTO
16 AVCC
C1202 100N-K AVCC
12 OP0
14 ON1
15 OP1
17 ON2
18 OP2
19 ON3
20 OP3
ON0
AD8195
11
10/6.3(X5R)
100N-K
100N-K
1N-K
1N-K
OPEN
OPEN
OPEN
OPEN
OPEN
C1203
C1204
C1209
C1211
C1212
C1213
C1214
C1216
C1217
C1218
RX_C-
RX_C+
RX_0-
RX_0+
RX_1-
RX_1+
RX_2-
RX_2+ D
F
SCHEMATIC DIAGRAMS (2/26)
GND POWER + POWER - STBY POWER HDMI/TMDS SIGNAL LINE FRONT HDMI UNIT
124
1 2 3 4 5 6 7 8
D
STBY5V
CEC5V
HDMI RX (ADV7850)
680mA
D.SUPPLY CEC3.3V
1620mA
FROM CEC1.8V
TO BG DGND
HPD5V
C1302 100N-K L1302
VIN8 BLM21PG221
TVDD
4.7U(1608)
C1303 10N-K VIN9 U1302
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
10N-K
C1304 100N-K ADV7850 3.3V 400mA
E 1Vp-p C1305 1N-K

VIN7
SYNC2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
A
DIGITAL CNT DECIN_Y R1306 24-D(1608) C1306 100N-K VIN4
C1351
C1452
C1462
C1496
C1447
C1457
C1469
C1476
C1480
C1484
C1487
C1491
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23
R1307 24-D(1608) C1307 100N-K
FROM DECIN_CR VIN5
TO BB DECIN_CB
DECIN_V
R1308
R1309
24-D(1608)
24-D(1608)
C1308
C1309
100N-K
100N-K
VIN6
VIN12
A
DGND DGND DGND RXB_2+ RXB_1+ RXB_0+ RXB_C+ TVDD .RXC_2+ .RXC_1+ .RXC_0+ .RXC_C+ DGND RXD_2+ RXD_1+ RXD_0+ RXD_C+ DGND DGND DGND
3.3V 20mA
DVDDIO L1303
L1304
BLM21PG221
BLM21PG221
TX_VDD33
4.7U(1608)
4.7U(1608)
B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23
NET/PHY
100N-K
100N-K
100N-K
100N-K
R1301 24-D(1608) C1310 100N-K
10N-K
10N-K
10N-K
10N-K
F 860_SY
R1302 24-D(1608) C1311 100N-K
VIN10 3.3V 50mA
TO 860_SC VIN11 B
51-D(1608)
51-D(1608)
51-D(1608)
51-D(1608)
51-D(1608)
51-D(1608)
TO AO ANALOG_VIDEO HPA_A. DGND RXB_2- RXB_1- RXB_0- RXB_C- HPA_B TVDD .RXC_2- .RXC_1- .RXC_0- .RXC_C- HPA_C DGND RXD_2- RXD_1- RXD_0- RXD_C- HPA_D DGND
C1323
C1329
C1335
C1341
C1358
C1364
C1369
C1387
C1393
C1398
C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 C21 C22 C23
C L1305 BLM21PG221
C3814
C3816
C3817
R1305
R1310
R1314
R1315
R1319
R1320
OPEN
OPEN
OPEN
AC_VDD
4.7U(1608)
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
10N-K
10N-K
10N-K
10N-K
10N-K
10N-K
10N-K
CVDD DGND DGND DGND DGND VDD_EEPROM TVDD TVDD TVDD TVDD TVDD TVDD DGND TVDD TVDD TVDD TVDD DGND DGND ACIN_1R ACIN_1L
1N-K
3.3V 150mA
N1301 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 D21 D22 D23
OPEN
N1301
FFC-23P(1.0-16-23PB-2) TX_EN
D
C1370
C1388
C1418
C1443
C1448
C1453
C1458
C1463
C1470
C1477
C1481
C1485
C1488
C1492
C1497
R1321 OPEN(2012) R1345
TO N1202
R1358 2K2
0
C3813
CEC R1322 OPEN CVDD RXD_5V DDCA_SCL DDCB_SCL DDCB_SDA DDCC_SCL DDCC_SDA DDCD_SCL DDCD_SDA VREG DGND VGA_SCL TVDD AC_VDD AC_VDD AC_VDD ACIN_2R ACIN_2L ACPLL_LF
23
R1312 0 R1323 680 E1 E2 E3 E4 E5 E6 E7 E8 E9 E10 E11 E12 E13 E14 E15 E16 E17 E18 E19 E20 E21 E22 E23 R1350 0(2012)
HPDF HPA_D PVDD
22
L1301
100N-K
100N-K
10N-K
10N-K
TXEN 1.8V 60mA BLM21PG221
21
E OUT U1304 IN
DDCA_SDA DDCD_SDA OPEN
20
CVDD RXC_5V. DGND DGND ACIN_3R ACIN_3L C1464 C1471

4.7U(1608) OPEN
DDCA_SCL DDCD_SCL C1493 C1515
19
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16 F17 F18 F19 F20 F21 F22 F23 OPEN(1608) OPEN(1608)
C1324
C1330
C1336
C1342
HDMI5V RXD_5V RXD_5V
18
FROM FRONT HDMI
CEC5V
17
F
L1306 BLM21PG221
CEC3.3V CVDD RXB_5V ACPLL_LF DGND ACIN_4R ACIN_4L VDD
16
4.7U(1608)
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
C3810 OPEN R1324 OPEN
10N-K
10N-K
10N-K
10N-K
10N-K
10N-K
10N-K
CEC3.3V G21 G23 1.8V 600mA
15
G1 G2 G3 G4 G5 G6 G7 G8 G9 G10 G11 G12 G13 G14 G15 G16 G17 G18 G19 G20 G22
DGND
C3811 OPEN
B
14
C3812 OPEN
DGND G
13
C1325
C1331
C1337
C1410
C1415
C1419
C1424
C1429
C1434
C1439
C1444
C1449
C1454
C1459
C1465
C1472
R3687 0 TVDD TVDD TVDD TVDD DGND CVDD CVDD CVDD CVDD CVDD CVDD CVDD DGND DGND AC_VDD DGND ACIN_5R ACIN_5L
RX_C- RXD_C-
12
R3688 0 H1 H2 H3 H4 H5 H6 H7 H8 H9 H10 H11 H12 H13 H14 H15 H16 H17 H18 H19 H20 H21 H22 H23
RX_C+ RXD_C+
11
L1307 BLM21PG221
DGND CVDD
10
4.7U(1608)
H
100N-K
100N-K
100N-K
100N-K
100N-K
R3689 0
10N-K
10N-K
10N-K
10N-K
10N-K
10N-K
10N-K
10N-K
OPEN
RX_0- RXD_0- 1.8V 450mA
9
R3690 0 EP_MISO SPDIF_IN RXA_5V DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND AC_FILTA VREF_AC
RX_0+ RXD_0+
8
J1 J2 J3 J4 J5 J6 J7 J8 J9 J10 J11 J12 J13 J14 J15 J16 J17 J18 J19 J20 J21 J22 J23
DGND
7
C1395
C1401
C1411
C1416
C1420
C1425
C1430
C1435
C1440
C1445
C1450
C1455
C1460
C1466
C1473
R3691 0
RX_1- RXD_1- J
6
R3692 0
RX_1+ RXD_1+
5
RESET DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND AC_VDD DGND AC_ISET AC_FILTD L1308 BLM21PG221
DGND V_VDD
4
R3693 0 K1 K2 K3 K4 K5 K6 K7 K8 K9 K10 K11 K12 K13 K14 K15 K16 K17 K18 K19 K20 K21 K22 K23 L1309 BLM21PG221
RX_2- RXD_2- 1.8V 350mA
3
4.7U(1608)
R3694 0 L1310 BLM21PG221
4.7U(1608)
RX_2+ RXD_2+ K
C1498 4.7U(1608)
2
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
10N-K
10N-K
10N-K
10N-K
10N-K
10N-K
10N-K
10N-K
10N-K
10N-K
10N-K
10N-K
100N-K
10N-K
DGND DGND DGND DVDDIO DVDDIO VDD DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND AC_VDD AC_VDD
1
R1359 L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 L18 L19 L20 L21 L22 L23
0
C1371
C1374
C1376
C1379
C1380
C1382
C1383
C1384
C1361
C1367
C1373
C1377
C1381
C1385
C1391
C1396
C1402
C1407
C1412
C1421
C1431
C1446
C1451
C1456
C1461
C1467
C1474
C1478
C1482
C1494
C1489
L
G DGND
LRCK/DSD2B SCLK INT1 SDA VDD DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND AC_VDD AC_VDD
CEC3.3V
TO B CEC5V M1 M2 M3 M4 M5 M6 M7 M8 M9 M10 M11 M12 M13 M14 M15 M16 M17 M18 M19 M20 M21 M22 M23 SDVDD 1.8V 50mA
TO HDMI SW (ADV3002)
SDRAM_VREF R1346 0(1608)

HPD5V M
SAVDD 1.8V 20mA
HSCL HSCL I2S3/DSD2A I2S2/DSD1B INT2 SCL VDD DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND AC_VDD DGND DGND DGND L1311 BLM21PG221
TX_AVDD1.8V 50mA
HSDA HSDA N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13 N14 N15 N16 N17 N18 N19 N20 N21 N22 N23 L1312 BLM21PG221
TX_PVDD 1.8V 100mA
ADV3002_RST ADV3002_RST L1313 BLM21PG221
TX_PLVDD 1.8V R1347 0(1608)
4.7U(1608)
4.7U(1608)
4.7U(1608)
CEC_COM CEC_COM N
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
R1348 OPEN(1608)
10N-K
10N-K
10N-K
10N-K
OPEN
OPEN
R1325 OPEN I2S1/DSD1A I2S0/DSD0B AC_MCLK AC_LRCLK VDD DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND PVDD PVDD XTALN XTALP
HPA_A. P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 P19 P20 P21 P22 P23 C
C1495
C1327
C1333
C1339
C1345
C1350
C1362
C1516
C1441
C1468
C1475
C1479
C1483
C1486
C1490
C1499
DDCC_SDA DDCC_SDA P
DDCC_SCL DDCC_SCL
R3695 0 SPDIF/DSD0A MCLK AC_SDI AC_SCLK VDD DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND
RXC_C- .RXC_C-
R3696 0 R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 R15 R16 R17 R18 R19 R20 R21 R22 R23
RXC_C+ .RXC_C+ C1501 OPEN
R3697 0 VREF_AC
RXC_0- .RXC_0- R C1502 OPEN
R3698 0
RXC_0+ .RXC_0+ VDD DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND REFN REFP C1503 OPEN
R3699 0 AC_FILTA
RXC_1- .RXC_1- T1 T2 T3 T4 T5 T6 T7 T8 T9 T10 T11 T12 T13 T14 T15 T16 T17 T18 T19 T20 T21 T22 T23 C1504 OPEN
R3700 0
RXC_1+ .RXC_1+ C1505 OPEN
R3701 0 T AC_FILTD
RXC_2- .RXC_2- C1506 OPEN
R3702 0
RXC_2+ .RXC_2+ DVDDIO DVDDIO DGND DGND VDD DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND V_VDD V_VDD V_VDD V_VDD C1507 OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
U1 U2 U3 U4 U5 U6 U7 U8 U9 U10 U11 U12 U13 U14 U15 U16 U17 U18 U19 U20 U21 U22 U23 R1351 OPEN(1608)
TX_RTERM.
R1352 470-D(1608)
U
C1360
C1363
C1365
C1366
C1368
C1372
C1375
C1378
R1326 OPEN C1508 OPEN

RXA_5V TX_AVDD TX_AVDD DGND TX_DDC_SCL VDD VDD VDD VDD VDD VDD VDD DGND DGND DGND VIN13 VIN12 VIN11 VIN10
R1327 OPEN REFN C1509 OPEN
HPA_C V1 V2 V3 V4 V5 V6 V7 V8 V9 V10 V11 V12 V13 V14 V15 V16 V17 V18 V19 V20 V21 V22 V23
RXC_5V. C1500
V 100N-K(1608)
RXB_5V
TX_2+ TX_2- DGND TX_DDC_SDA V_VDD V_VDD V_VDD V_VDD REFP C1510 OPEN
R1304 R1316 W1 W2 W3 W4 W5 W6 W7 W8 W9 W10 W11 W12 W13 W14 W15 W16 W17 W18 W19 W20 W21 W22 W23 C1511 8P(1608)
OPEN
OPEN
OPEN
XTALP
47K
OPEN OPEN
X1301 27MHz(FCX-04)
W R1349
N1302 R1311 R1317 OPEN
AD3PBI19G0-REV.B
R1329
R1328
R1330
R1332
0 0 TX_1+ TX_1- DGND TX_HPD DGND VIN9 VIN8

XTALN C1512 8P(1608)
Q1301 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 Y10 Y11 Y12 Y13 Y14 Y15 Y16 Y17 Y18 Y19 Y20 Y21 Y22 Y23
HP_DET C1513
9 10 11 12 13 14 15 16 17 18 19
OPEN HPA_B VREG
1UF-K(1608)
+5V Q1302
OPEN R1333 Y C1514 100N-K
DGND
DDC_SDA
680
DDCB_SDA
TX_0+
AA1 AA2
TX_0- DGND
AA3
DGND
AA4 AA5 AA6 AA7 AA8 AA9
DGND
AA10
SDRAM_DQ6 SDRAM_DQ7 SDRAM_DQ0 SDRAM_DQ8SDRAM_UDQS SDVDD
AA11 AA12 AA13 AA14 AA15 AA16
SAVDD
AA17 AA18 AA19
DGND
AA20 AA21
SYNC3
AA22
VIN7
AA23
HS_IN1/TRI7
VIN1
C1317
C1314
0
0 R1408 2
4K7*4 3
1 8
7
AC_ISET R1353 OPEN D
C1316 0 6 R1354 OPEN
DDC_SCK DDCB_SCL VIN3 SYNC1
AA C1315 0 4 5 R1355 OPEN
N.C VIN2 SYNC3
FROM HDMI IN5
TX_C+ TX_C- TX_AVDD DGND DGND SDRAM_DQ4 SDRAM_DQ5 SDRAM_DQ2SDRAM_DQ11 SDVDD DGND HS_IN1/TRI7 VS_IN1/TRI8 DGND HS_IN2/TRI5 VS_IN2/TRI6 C1319 0 1 8 R1356 OPEN
CE_REMOTE VS_IN1/TRI8
R1409 2
TRI4
AB1 AB2 AB3 AB4 AB5 AB6 AB7 AB8 AB9 AB10 AB11 AB12 AB13 AB14 AB15 AB16 AB17 AB18 AB19 AB20 AB21 AB22 AB23 C1320 0 7
TXC- RXB_C- HS_IN2/TRI5
4K7*4 3
C1321 0 6
TXC_SHLD AB
VS_IN2/TRI6
C1318 0 4 5 R1357 OPEN
TXC+ RXB_C+
DGND TX_PVDD TX_PLVDD SDVDD SDRAM_VREF SDVDD
VIN13 EP_MISO
SDRAM_DQ3SDRAM_DQ10SDRAM_DQ12SDRAM_DQ14 DGND SYNC1 VIN3 DGND SYNC2 VIN6 TRI4 1 8
TX0- RXB_0- SDRAM_UDQS
R1413 2
AC1 AC2 AC3 AC4 AC5 AC6 AC7 AC8 AC9 AC10 AC11 AC12 AC13 AC14 AC15 AC16 AC17 AC18 AC19 AC20 AC21 AC22 AC23 1 8 7
TX0_SHLD ACIN_5L SDRAM_DQ8
8
R1410 2 7 4K7*4 3 6
TX0+ RXB_0+ AC ACIN_5R SDRAM_DQ11
7
47K*4 3 6 4 5
TX1- RXB_1- ACIN_4L SDRAM_DQ0
6
DGND TX_RTERM. TX_VDD33 SDVDD SDVDD SDRAM_LDQSSDRAM_DQ1 SDRAM_DQ9SDRAM_DQ15SDRAM_DQ13 DGND VIN1 VIN2 DGND VIN4 VIN5 DGND 4 5 1 8
TX1_SHLD ACIN_4R SDRAM_DQ3
5
1 8 R1414 2 7
TX1+ RXB_1+ ACIN_3L SDRAM_DQ1
4
R1411 2 7 4K7*4 3 6
VCH4AG100R8MA
VCH4AG100R8MA
TX2- RXB_2- ACIN_3R SDRAM_DQ10

3
1 8
MCLK 47K*4 3 6 4 5
TX2_SHLD R1403 ACIN_2L SDRAM_DQ9
2
2 7
SPDIF/DSD0A 4 5 1 8
TX2+ RXB_2+ ACIN_1L
TX_DDC_SDA
33*4
TX_DDC_SCL
1
R1342 47K R1415 2

RESET
3 6
I2S0/DSD0B
INT1
INT2
SDA
7
VCH4AG100R8MA
ACIN_2R
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
SCL
4 5
I2S1/DSD1A R1343 47K 4K7*4 3
TX_HPD

Hfe Marantz nr1603 Service en

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Hfe Marantz nr1603 Service en

Uploaded by

Copyright:

Available Formats

NR1603 /U1B,K1B

Manual AV Surround Receiver

What you can do with this manual

You can use the search function in Acrobat Reader to

2.Enter the Ref. No. you want to search for in the

• Page magnification stays the same as before the

3.Click an item on the list.

• When you want to move the area shown, hold down

Print a magnified part of the manual

1. Drag the mouse to magnify the part you want to print.

2. On the "File" menu, click "Print".

3. Configure the following settings in the Print dialog box.

4. Click the Print button to start printing.

[Example using Adobe Reader X] [Example using Adobe Reader X]

[Example using Adobe Reader 9] [Example using Adobe Reader 9]

USA EUROPE / TRADING CANADA

SHOCK, FIRE HAZARD SERVICE TEST :

In case of difficulties, do not hesitate to contact the Technical

LEAKAGE CURRENT CHECK

NOTE FOR PARTS LIST

RD : Carbon 2B : 1/8 W F : ±1% P : Pulse-resistant type

CE : Aluminum foil 0J : 6.3 V F : ±1% HS : High stability type

* Capacity (electrolyte only)

50.0 340.0 50.0

1. Turn off the power pressing "ON/STANDBY (X)" button.

NOTE: • If step 3 fails, start over from step 1.

ON/STANDBY (X) INTERNET RADIO

8U-110084S : EXTENSION UNIT KIT : 1 Set

8U-210100S : WRITING KIT : 1 Set

FRONT PANEL ASSY PCB RC5_MX RADIATOR ASSY

POWER TRANS MAIN AV ASSY PCB SMPS

The viewpoint of each photograph

Shooting direction: C Shooting direction: D

1. FRONT PANEL ASSY

(1) Remove the screws.

View from the bottom

STYLE PIN:Loosen STYLE PIN : Loosen

Shooting direction: C Shooting direction: D

STYLE PIN : Loosen

(1) Remove the screws.

View from the bottom

(2) Remove the screws.

Shooting direction: C Shooting direction: D

STYLE PIN : Loosen

(4) Disconnect the connector wires.

STYLE PIN : Loosen

CP401 CP402 CP403 CP405

(1) Disconnect the connector wires, then remove the screws.

CP4602 CP4603 CP4615 CP4614

(1) Remove the screws.

(2) Disconnect the connector board.

STYLE PIN : Loosen N3405 N3601

FFC N2801 FFC

STYLE PIN : Loosen

CLAMP WIRE (MTG) : Loosen

(2) Disconnect the connector wires.

STYLE PIN : Loosen

(2) Remove the screws.

View from the bottom

(1) Remove the screws.

View from the bottom

Remove the screws, after remove

CP402 CP1 CP403 CP405

• Please check the