1 s2.0 S2214785320362878 Main
1 s2.0 S2214785320362878 Main
a r t i c l e i n f o a b s t r a c t
Article history: Powder Bed Fusion (PBF) is an Additive Manufacturing (AM) process. It is the layer by layer addition pro-
Received 23 June 2020 cess. In the future, it is going to be manufactured all types of products used in automotive, aerospace,
Accepted 16 August 2020 energy sectors and home appliances. These products can be produced using various AM methods. Few
Available online 24 September 2020
of them are Laminated Object Manufacturing, Powder Bed Fusion and Direct Energy Deposition,
Stereolithography (SLA), and Solid Ground Curing (SGC).
Keywords: The present brief review is concentrated on working of PBF process only. It includes Direct Metal Laser
Powder bed fusion
Deposition (DMLS), Selective Laser Sintering (SLS), Selective Laser Melting (SLM), Electron Beam Melting
Additive manufacturing
Sintering and melting
(EBM) and Selective Heat Sintering (SHS). In these processes powder lay on the powder bed and it is also
known as built platform. Laser used as heat energy source for SLS, SLM and DMLS processes. But EBM uses
electron beam as source of energy. The SHS process uses heated thermal head for sintering plastic pow-
ders. SLS, DMLS and SHS are powder sintering processes. But SLM and EBM are powder melting processes.
This review paper is also covered historical development and usage of technologies, CNC verses
Additive Manufacturing/Rapid Prototyping, AM process chain, Classification of AM processes; advantages,
disadvantages and applications of PBF process.
Ó 2021 Elsevier Ltd. All rights reserved.
Selection and peer-review under responsibility of the scientific committee of the 2nd International Con-
ference on Manufacturing Material Science and Engineering.
https://doi.org/10.1016/j.matpr.2020.08.415
2214-7853/Ó 2021 Elsevier Ltd. All rights reserved.
Selection and peer-review under responsibility of the scientific committee of the 2nd International Conference on Manufacturing Material Science and Engineering.
D. Dev Singh et al. Materials Today: Proceedings 46 (2021) 350–355
Table 1
Difference between CNC systems and AM/RP systems.
Table 2
Basic difference among Traditional, RP and AM processes
351
D. Dev Singh et al. Materials Today: Proceedings 46 (2021) 350–355
Table 4
Details of laser sintering and laser melting [1].
352
D. Dev Singh et al. Materials Today: Proceedings 46 (2021) 350–355
Table 5
Details of SHS and EBM [1].
1.5.2. Disadvantages
1.5.3. Applications the powders that fuses the powders and solidifies it as end compo-
nents. These methods manufacture accurate and good surface fin-
1. Prototypes for demonstrational purpose. ish parts for small scale production because of smaller beam size.
2. Conceptual Models, Engineering Models, and Functional
Prototypes.
3. Production of structural components by SLS, EBM 2.1. Selective Laser Sintering (SLS) process
4. Custom-made bio-implants (Ti6Al4V) using EBM and SLM.
5. Applications in mold making and Tooling. The illustration of SLS method with respective to the Fig. 4 is
6. Applications in Aerospace, automotive industries. given here. Powder can be spread on the built platform by roller
mechanism, when the powder delivery piston moves up. The laser
beam can scan the powders selectively and fuse/sinter the powder
2. Powder Bed fusion (PBF) process
particles based on 3D CAD data, forming the first sintered layer.
Part building bed can move down by the required thickness and
PBF process is an advanced production technology that can be
second layer of powder is spread on first sintered layer. Then laser
utilized to fabricate actual parts from the desired 3D solid CAD
beam again scans selectively and forms the second layer by fusion
model data based on layer by layer addition concept
onto the first layer. The process can repeat till the complete build-
[1,2,3,6,7,8,9,10,11,12]. This process uses either laser or electron
ing of physical part. The part is taken from the RP machine cleaning
beam as the heat energy sources for irradiation, fusion and melting
and for secondary processes if required [1,2,3,6,7,8,9,10,11,12,15].
of powder particles. The most commonly used heat sources in PBF
Sometimes CO2 laser beam is used [16].
are various types of lasers. The types of PBF processes are
In metal SLS process a mixture powder is used. It consists of one
powder having low melting point and another high melting point.
1. Selective Laser Sintering (SLS)
During SLS process only low melting point powders can partially
2. Selective Laser Melting (SLM)
melt and forms the bond with unmelt high melting point powders.
3. Direct Metal Laser Sintering (DMLS)
4. Selective Heat Sintering (SHS)
5. Electron Beam Melting (EBM) 2.2. Selective Laser melting (SLM) process
Sintering process by laser, again classified based as polymer The working of SLM process is similar to that of SLS process. It
Laser Sintering (pLS) process and metal Laser Sintering (mLS) pro- melts alloy powder particles instead of sintering
cess. These processes were carried out by pLS machine and mLS [1,2,6,7,8,9,10,12,15,17,18]. It is shown in Fig. 5. The manufactur-
machine. Electron Beam Melting is used to create parts with metals ing cycle time of complex part production is rapidly reduced. Finer
and alloys powders in a vacuum built chamber. Almost all PBF microstructure can be observed at high cooling rate compared to
methods involved spreading of powders over previous layers. This conventional manufacturing methods. SLM parts have excellent
can be done by a roller or a blade mechanism. PBF techniques mechanical properties. Aerospace, automobile, and medical appli-
[13,14] start from the spreading of powders and the beam scans cations parts are produced by SLM. Lattice structure can be pro-
353
D. Dev Singh et al. Materials Today: Proceedings 46 (2021) 350–355
Electron Beam Melting (EBM) is an another powder fusion pro- The authors declare that they have no known competing finan-
cess uses beam of electrons as heat energy source for melting cial interests or personal relationships that could have appeared
metal powders [1,2,3,6,7,9,11,12,17] as shown in Fig. 7. In EBM, to influence the work reported in this paper.
354
D. Dev Singh et al. Materials Today: Proceedings 46 (2021) 350–355
355