GeM Bidding 3131079
GeM Bidding 3131079
GeM Bidding 3131079
Dated: 09-02-2022
Bid Document
Bid Details
Total Quantity 4
Past Performance 80 %
Bid to RA enabled No
EMD Detail
1/7
EMD Percentage(%) 1.53
ePBG Detail
(a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the
relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service
Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy.
(b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable.
Beneficiary:
Assistant Conservator of Forest (South)
Sanjay Gandhi National Park, Revenue and Forest Department Maharashtra, Forest Department,
(Sanjay Baban Kamble)
Splitting
1. The minimum average annual financial turnover of the bidder during the last three years, ending on 31st
March of the previous financial year, should be as indicated above in the bid document. Documentary evidence in
the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant /
Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the
date of constitution / incorporation of the bidder is less than 3-year-old, the average turnover in respect of the
completed financial years after the date of constitution shall be taken into account for this criteria.
2. Experience Criteria: In respect of the filter applied for experience criteria, the Bidder or its OEM {themselves or
through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any
Central / State Govt Organization / PSU / Public Listed Company for number of Financial years as indicated above
in the bid document before the bid opening date. Copies of relevant contracts to be submitted along with bid in
support of having supplied some quantity during each of the Financial year. In case of bunch bids, the category of
primary product having highest value should meet this criterion.
3. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product
during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period
shall be uploaded with the bid. In case the date of constitution / incorporation of the OEM is less than 3 year old,
the average turnover in respect of the completed financial years after the date of constitution shall be taken into
account for this criteria.
4. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and
2/7
for determining the Eligibility Criteria related to Turn Over, Past Performance and Project / Past Experience etc.
This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any
impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of
quoted prices which would be determined by the buyer based on its own assessment of reasonableness and
based on competitive prices received in Bid / RA process.
5. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or
similar Category Products for 80% of bid quantity, in at least one of the last three Financial years before the bid
opening date to any Central / State Govt Organization / PSU / Public Listed Company. Copies of relevant
contracts (proving supply of cumulative order quantity in any one financial year) to be submitted along with bid
in support of quantity supplied in the relevant Financial year. In case of bunch bids, the category related to
primary product having highest bid value should meet this criterion.
Electric Bus ( 4 )
Technical Specifications
Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.
Consignee/Reporti
S.No. Address Quantity Delivery Days
ng Officer
Scope of supply (Bid price to include all cost components) : Supply Installation Testing Commissioning of
Goods and Training of operators and providing Statutory Clearances required (if any)
2. Turnover
Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last
three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the
3/7
relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the
bidder is less than 3 year old, the average turnover in respect of the completed financial years after the
date of constitution shall be taken into account for this criteria.
3. Turnover
OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product
during the last three years, ending on 31st March of the previous financial year, should be as indicated in
the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant
periods or a certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for
the relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the
OEM is less than 3 year old, the average turnover in respect of the completed financial years after the
date of constitution shall be taken into account for this criteria. In case of bunch bids, the OEM of
CATEGORY RELATED TO primary product having highest bid value should meet this criterion.
4. OEM
IMPORTED PRODUCTS: In case of imported products, OEM or Authorized Seller of OEM should have a
registered office in India to provide after sales service support in India. The certificate to this effect should
be submitted.
Availability of Service Centres: Bidder/OEM must have a Functional Service Centre in the State of each
Consignee's Location in case of carry-in warranty. (Not applicable in case of goods having on-site
warranty). If service center is not already there at the time of bidding, successful bidder / OEM shall have
to establish one within 30 days of award of contract. Payment shall be released only after submission of
documentary evidence of having Functional Service Centre.
Dedicated /toll Free Telephone No. for Service Support : BIDDER/OEM must have Dedicated/toll Free
Telephone No. for Service Support.
Escalation Matrix For Service Support : Bidder/OEM must provide Escalation Matrix of Telephone Numbers
for Service Support.
8. Inspection
Nominated Inspection Agency: On behalf of the Buyer organization, any one of the following
Inspection Agency would be conducting inspection of stores before acceptance:
Pre-dispatch Inspection at Seller Premises (applicable only if pre-dispatch inspection clause has been
selected in ATC): Yes
Post Receipt Inspection at consignee site before acceptance of stores: Yes
9. Inspection
4/7
inspection beyond 7 days shall be on the part of the buyer and shall be regularised without Liquidated
Damages.
When there is requirement of submission the advance sample, the seller shall inform the buyer promptly
through emails about the date of submission of sample to the buyer nominated Inspection agency.
10. Inspection
Testing of Sample: The testing of advance sample and bulk sample during PDI will be carried at the
designated AHSP labs.When testing facilities are not available, the facilities of Govt labs/NABL/Accredited
labs will be utilized. The testing charges outside the designated AHSP labs to be borne by seller's.
11. Certificates
Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the
Bid document, ATC and Corrigendum if any.
12. Certificates
ISO 9001: The bidder or the OEM of the offered products must have ISO 9001 certification.
13. Certificates
Material Test Certificate Should Be Sent Along with The Supply. The Material Will Be Checked by Buyer’s
Lab & the Results of the Lab will be the Sole Criteria for Acceptance of the Item.
14. Certificates
The bidder is required to upload, along with the bid, all relevant certificates such as BIS licence, type test
certificate, approval certificates and other certificates as prescribed in the Product Specification given in
the bid document.
15. Certificates
To be eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the
date of bid opening (to be uploaded with bid): Yes.
16. Warranty
Timely Servicing / rectification of defects during warranty period: After having been notified of the defects
/ service requirement during warranty period, Seller has to complete the required Service / Rectification
within 7 days time limit. If the Seller fails to complete service / rectification with defined time limit, a
penalty of 0.5% of Unit Price of the product shall be charged as penalty for each week of delay from the
seller. Seller can deposit the penalty with the Buyer directly else the Buyer shall have a right to recover all
such penalty amount from the Performance Security (PBG).Cumulative Penalty cannot exceed more than
10% of the total contract value after which the Buyer shall have the right to get the service / rectification
done from alternate sources at the risk and cost of the Seller besides forfeiture of PBG. Seller shall be
liable to re-imberse the cost of such service / rectification to the Buyer.
For fulfilling the experience criteria any one of the following documents may be considered as valid proof
for meeting the experience criteria:
a. Purchase Order copy along with Invoice(s) with self-certification by the bidder that supplies against the
invoices have been executed.
b. Execution certificate by client with order value.
c. Any other document in support of order execution like Third Party Inspection release note, etc.
The Bidder / OEM {themselves or through reseller(s)}, should have executed project for supply and
installation / commissioning of same or similar Category Products during preceding 3 financial years (i.e.
current year and three previous financial years) as on opening of bid, as per following criteria:
5/7
(i) Single order of at least 35% of estimated bid value; or
(ii) Two orders of at least 20% each of estimated bid value; or
(iii) Three orders of at least 15% each of estimated bid value.
Satisfactory Performance certificate issued by respective Buyer Organization for the above Orders should
be uploaded with bid. In case of bunch bids, the Category related to primary product having highest bid
value should meet this criterion
NET WORTH: Net Worth of the OEM should be positive as per the last audited financial statement.
20. Generic
Without prejudice to Buyer’s right to price adjustment by way of discount or any other right or remedy
available to Buyer, Buyer may terminate the Contract or any part thereof by a written notice to the Seller,
if:
i) The Seller fails to comply with any material term of the Contract.
ii) The Seller informs Buyer of its inability to deliver the Material(s) or any part thereof within the
stipulated Delivery Period or such inability otherwise becomes apparent.
iii) The Seller fails to deliver the Material(s) or any part thereof within the stipulated Delivery Period
and/or to replace/rectify any rejected or defective Material(s) promptly.
iv) The Seller becomes bankrupt or goes into liquidation.
v) The Seller makes a general assignment for the benefit of creditors.
vi) A receiver is appointed for any substantial property owned by the Seller.
vii) The Seller has misrepresented to Buyer, acting on which misrepresentation Buyer has placed the
Purchase Order on the Seller.
21. Generic
While generating invoice in GeM portal, the seller must upload scanned copy of GST invoice and the
screenshot of GST portal confirming payment of GST.
Successful Bidder can submit the Performance Security in the form of Fixed Deposit Receipt also (besides
PBG which is allowed as per GeM GTC). FDR should be made out or pledged in the name of Yes A/C (Name
of the Seller). The bank should certify on it that the deposit can be withdrawn only on the demand or with
the sanction of the pledgee. For release of Security Deposit, the FDR will be released in favour of bidder
by the Buyer after making endorsement on the back of the FDR duly signed and stamped along with
covering letter. Successful Bidder has to upload scanned copy of the FDR document in place of PBG and
has to ensure delivery of hard copy of Original FDR to the Buyer within 15 days of award of contract.
Disclaimer
The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization. Buyer organization is solely responsible for the impact of these clauses on the
bidding process, its outcome and consequences thereof including any eccentricity / restriction arising in the
bidding process due to these ATCs and due to modification of technical specification and / or terms and
conditions governing the bid. Any clause incorporated by the Buyer such as demanding Tender Sample,
incorporating any clause against the MSME policy and Preference to make in India Policy, mandating any Brand
names or Foreign Certification, changing the default time period for Acceptance of material or payment timeline
governed by OM of Department of Expenditure shall be null and void and would not be considered part of bid.
Further any reference of conditions published on any external site or reference to external documents / clauses
shall also be null and void. If any seller has any objection / grievance against these additional clauses or
otherwise on any aspect of this bid, they can raise their representation against the same by using the
Representation window provided in the bid details field in Seller dashboard after logging in as a seller within 4
days of bid publication on GeM. Buyer is duty bound to reply to all such representations and would not be
allowed to open bids if he fails to reply to such representations.
6/7
In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action
in accordance with the laws.
---Thank You---
7/7