Mechanic Diesel CTS2.0 NSQF-3
Mechanic Diesel CTS2.0 NSQF-3
Mechanic Diesel CTS2.0 NSQF-3
MECHANIC DIESEL
(Duration: One Year)
Revised in July 2022
CRAFTSMEN TRAINING SCHEME (CTS)
NSQF LEVEL- 3
SECTOR –AUTOMOTIVE
MECHANIC DIESEL
(Engineering Trade)
Version: 2.0
NSQF LEVEL - 3
Developed By
2. Training System 2
3. Job Role 6
4. General Information 7
5. Learning Outcome 10
6. Assessment Criteria 11
7. Trade Syllabus 16
The Trainees will cover the safety aspect in general and specific to the trade, identification
of tools & equipment, raw materials used.The trainee will perform Measuring & marking by using
various Measuring & Marking tools. The trainee will be able to plan and perform basic fastening
and fitting operations. Familiarize with basics of electricity, test and measure the electrical
parameter. Skilling practice on maintenance of batteries being done. Practice making various
welding joints by using Arc and gas welding. Trace and identify various hydraulics and pneumatics
components and identify components in Air and Hydraulic Brake system. Identify various types of
vehicle.
The candidate will be able to perform practice on dismantling Diesel Engine of LMV as per
given standard procedures. Able to achieve skill on Overhauling of Cylinder Head , valve train ,
Piston, connecting rod assembly, crankshaft, flywheel and mounting flanges, spigot and bearings,
camshaft etc. practice reassembling all parts of engine in correct sequence as per workshop
manual. Perform testing on engine. Also the trainee practice on repair and maintenance of
Cooling, lubrication, Intake & Exhaust system of Engine. Perform maintenance of diesel fuel
system, FIP, Governor and monitor emission of vehicle. Practice on repair, maintenance and
overhaul of Starter, alternator and perform Execute troubleshooting in engine of LMV/HMV.
1
Mechanic Diesel
2. TRAINING SYSTEM
2.1 GENERAL
The Directorate General of Training (DGT) under Ministry of Skill Development &
Entrepreneurship offers a range of vocational training courses catering to the need of different
sectors of economy/ Labour market. The vocational training programmes are delivered under the
aegis of Directorate General of Training (DGT). Craftsman Training Scheme (CTS) with variants and
Apprenticeship Training Scheme (ATS) are two pioneer schemes of DGT for strengthening
vocational training.
Mechanic Diesel trade under CTS is one of the popular courses delivered nationwide
through a network of ITIs. The course is of one-year duration. It mainly consists of Domain area
and Core area. The Domain area (Trade Theory & Practical) imparts professional skills and
knowledge, while Core area (Employability Skills) imparts requisite core skill, knowledge and life
skills. After passing out of the training programme, the trainee is awarded National Trade
Certificate (NTC) by DGT which is recognized worldwide.
Can join industry as Technician and will progress further as Senior Technician, Supervisor
and can rise up to the level of Manager.
Can become Entrepreneur in the related field.
Can join Apprenticeship programme in different types of industries leading to National
Apprenticeship certificate (NAC).
Can join Crafts Instructor Training Scheme (CITS) in the trade for becoming instructor in
ITIs.
Can join Advanced Diploma (Vocational) courses under DGT as applicable.
2
Mechanic Diesel
Table below depicts the distribution of training hours across various course elements
during a period of one-year:
Notional Training
S No. Course Element Hours
1st Year
1 Professional Skill (Trade Practical) 840
2 Professional Knowledge (Trade Theory) 240
3 Employability Skills 120
Total 1200
150 hours of mandatory OJT (On the Job Training) at nearby industry wherever not
available then group project is mandatory.
Trainees of one-year or two-year trade can also opt for optional courses ofup to 240 hours
in each year for 10th/ 12th class certificate along with ITI certification, or, add on short term
courses.
The trainee will be tested for his skill, knowledge and attitude during the period of course
through formative assessment and at the end of the training programme through summative
assessment as notified by the DGTfrom time to time.
a) The Continuous Assessment (Internal)during the period of training will be done by Formative
Assessment Method by testing for assessment criteria listed against learning outcomes.The
training institute has to maintain an individual trainee portfolio as detailed in assessment
guideline. The marks of internal assessment will be as per the formative assessment template
provided on www.bharatskills.gov.in
b) The final assessment will be in the form of summative assessment. The All India Trade Test for
awarding NTCwill be conducted by Controller of examinations, DGT as per the guidelines. The
pattern and marking structure is being notified by DGT from time to time. The learning outcome
and assessment criteria will be the basis for setting question papers for final assessment. The
3
Mechanic Diesel
examiner during final examination will also check the individual trainee’s profile as detailed in
assessment guideline before giving marks for practical examination.
For the purposes of determining the overall result, weightage of 100% is applied for six
months and one year duration courses and 50% weightage is applied to each examination for two
years courses. The minimum pass percent for Trade Practical and Formative assessment is 60% &
for all other subjects is 33%.
Appropriate arrangements should be made to ensure that there will be no artificial barriers
to assessment. The nature of special needs should be taken into account while undertaking the
assessment. Due consideration should be given while assessing for teamwork,
avoidance/reductionofscrap/wastage and disposal of scrap/waste as per procedure, behavioral
attitude, sensitivity to the environment and regularity in training. The sensitivity towards OSHE
and self-learning attitude are to be considered while assessing competency.
4
Mechanic Diesel
(c) Marks in the range of more than 90% to be allotted during assessment
For performance in this grade, the candidate, High skill levels in the use of hand
with minimal or no support in organization and tools, machine tools and workshop
execution and with due regard for safety equipment.
procedures and practices, has produced work Above 80% accuracyachieved while
which demonstrates attainment of a high undertaking different work with those
standard of craftsmanship. demanded by the component/job.
A high level of neatness and
consistency in the finish.
Minimal or no support in completing
the project.
5
Mechanic Diesel
3. JOB ROLE
Mechanic, Diesel Engine; Oil Engine, Fitter repairs services and overhauls diesel or oil engines for
efficient performance as prime mover to drive machinery and equipment. Examine engine to
locate defects, using various tools and instruments. Dismantles or partly dismantles it to remove
damaged or worn out parts and replaces or repairs them.
Grinds valve and assembles parts, doing supplementary tooling and other functions as
necessary to ensure accuracy of fit. Installs assembled or repaired engine in position and connects
pulley or wheel to propulsion system. Starts engine, tunes it up and observes performance noting
different meter readings such as temperature, fuel level, oil pressure, etc. and sets it to specified
standard for optimum performance. Checks, adjusts and lubricates engine periodically and
performs such other functions to keep engine in good working order. May solder or braze parts
and service diesel fuel pumps and injectors.
Plan and organize assigned work and detect & resolve issues during execution in his own
work area within defined limit. Demonstrate possible solutions and agree tasks within the team.
Communicate with required clarity and understand technical English. Sensitive to environment,
self-learning and productivity.
Reference NCO-2015:
i) 7233.0400 –Mechanic, Diesel Engine
Reference NOS: --
ASC/N9401
CSC/N0304
ELE/N9412
CSC/N0304
CSC/N9404
ASC/N9402
ASC/N9403
ASC/N9404
ASC/N9405
ASC/N9406
ASC/N9404
6
Mechanic Diesel
ASC/N9404
ASC/N9407
ASC/N9408
ASC/N9409
CSC/N9401
CSC/N9402
7
Mechanic Diesel
4. GENERAL INFORMATION
Essential Qualification:
Relevant regular/RPL variants of National Craft Instructor
Certificate (NCIC) under DGT.Must possess valid LMV driving
license.
8
Mechanic Diesel
Essential Qualification:
Regular / RPL variants of National Craft Instructor Certificate
(NCIC) in relevant trade
OR
Regular / RPL variants NCIC in RoDA or any of its variants under DGT
3. Engineering Drawing B.Voc/Degree in Engineering from AICTE/UGC recognized
Engineering College/ university with one-year experience in the
relevant field.
OR
03 years Diploma in Engineering from AICTE / recognized board of
technical education or relevant Advanced Diploma (Vocational)
from DGT with two years’ experience in the relevant field.
OR
NTC/ NAC in any one of the Mechanical group (Gr-I) trades
categorized under Engg. Drawing’/ D’man Mechanical / D’man
Civil’ with three years’ experience.
Essential Qualification:
Regular / RPL variants of National Craft Instructor Certificate
(NCIC) in relevant trade
OR
Regular / RPL variants of NCIC in RoDA / D’man (Mech /civil) or any of
its variants under DGT.
4. Employability Skill MBA/ BBA / Any Graduate/ Diploma in any discipline with Two
years’ experience with short term ToT Course in Employability
Skills.
9
Mechanic Diesel
10
Mechanic Diesel
5. LEARNING OUTCOME
Learning outcomes are a reflection of total competencies of a trainee and assessment will
be carried out as per the assessment criteria.
11
Mechanic Diesel
6. ASSESSMENT CRITERIA
2. Plan & perform basic Describe the purpose, use of auto hand tools.
fastening & fitting operation List the safety rules for hand tools.
by using correct hand tools, Select the correct tool for the job.
Machine tools Set up the tacked pieces in specific position.
&equipments. CSC/N0304 Joint components by Brazing, Soldering, Riveting as per given
drawing.
Produce components by different operation (Drilling, Reaming,
Taping, Dieting)
3. Trace and Test all Electrical Plan and prepare as per procedure and safety methods of
& Electronic components & soldering the cable ends using an electric soldering iron.
circuits and assemble circuit Use crimping tool to make a circuit joint.
to ensure functionality of Explain the connection of an ammeter, voltmeter, and
system. Charge and test ohmmeter in a circuit trouble shooting.
batteries used in vehicle. State open & short circuit, series and parallel circuits.
ELE/N9412 Verify DC series & parallel circuits and its characteristics.
Check out the open and short circuits in the lighting circuits.
Verify ohm’s law and measure resistance using rheostat.
Check the voltage drop in the auto electrical system by using
multimeter.
Trace the auto electrical components by using vehicle wiring
12
Mechanic Diesel
circuits.
Check the condition of the solenoid switch in the starting
system.
Determine the forward to reverse resistance ratio of diodes
and identify good / bad diodes.
Perform battery charging and check
4. Join components by using Arc Determine the principles, process of different welding process
& Gas welding. CSC/N0304 applicable in automobile industry.
Demonstrate the edge preparation for butt and fillets welds.
Select the type and size of filler rod and flux/electrode, size of
nozzle and gas pressure/welding current, preheating method
and temperature as per requirement.
Set and tack metals as per drawing.
Deposit the weld maintaining appropriate technique and safety
aspects.
Cool the welded joint by observing appropriate cooling
method. Use post heating, peening etc. as per requirement.
Clean the joint and inspect the weld for its uniformity and
different types of surface defects.
5. Trace & Test Hydraulic and Demonstrate Brake System (Hydraulic& Air).
Pneumatic components. Demonstrate Hydraulic Power Steering.
CSC/N9404
13
Mechanic Diesel
8. Overhaul & service Diesel Remove accessories fitted to the engine prior to engine
Engine, its parts and check removal.
functionality.(Judge weather Align the left hook of the crane with engine lifting bracket.
this Engine needs overhaul or Remove the engine mountings
not) ASC/N9404 Remove the engine from vehicle.
Mount the engine on the vehicle.
Align and fit the gear box to the engine.
Refit the accessories to the engine.
Set the Timing of the Engine
Overhaul Valve Actuating Mechanism (Hydraulic latch
actuator).
9. Trace, Test & Repair Cooling Overhauling of Radiator/ Recovery tank water pump, oil pump,
and Lubrication System of air cleaner
engine ASC/N9405 Check the engine oil pressure at different r.p.ms.
Overhaul the Oil Pump.
Set Checking &Top up coolant, Draining & refilling coolant.
Testing cooling system pressure & Thermostat
Cleaning & reverse flushing. Overhauling water pump and
refitting and repairs to oil flow pipe lines and unions if
necessary.
Check proper functioning of radiator fan (Mechanical/ Electrical
/ viscous / belt drive).
10. Trace & Test Intake and Overhauling of manifolds, silencer and tail pipe, air compressor,
Exhaust system of engine air exhauster and inspect parts of air exhauster, turbo charger
ASC/N9406 from vehicle.
Overhauling of air filter, clean & refit air cooler, fuel filter
assembly and replace filter elements
Remove and replace EGR valve, Use Smoke meter to test
emission from engine.
14
Mechanic Diesel
11. Service Diesel Fuel System Overhauling fuel feed pump, fuel injector pump.
and check proper Test injectors, check the injection timing by the spill cut off
functionality. ASC/N9404 method
12. Plan & overhaul the Start engine, adjust idling speed.
stationary engine and Overhaul the Governor (Mechanical & Pneumatic)
Governor and check Set the Engine Timing.
functionality. ASC/N9404 Check performance of engine off load.
Servicing of the cylinder and replace the defective parts.
14. Carryout overhauling of Trace the circuit from the alternator to the battery.
Alternator and Starter Perform servicing of starter motor.
Motor. ASC/N9408 Perform servicing of alternator and test its performance.
Check belt condition and replace as per requirement.
15. Diagnose & rectify the Plan and diagnose the problem if engine not starting.
defects in LMV/HMV to Diagnose high fuel consumption and engine overheating.
ensure functionality of Diagnose for excessive oil consumption and low/high engine
vehicle. ASC/N9409 oil pressure.
Diagnose for abnormal engine noise.
Diagnose for engine’s poor performance.
17. Read and apply engineering Read & interpret the information on drawings and apply in
15
Mechanic Diesel
16
Mechanic Diesel
7. TRADE SYLLABUS
17
Mechanic Diesel
18
Mechanic Diesel
19
Mechanic Diesel
20
Mechanic Diesel
e-
Definition,partsofafile,sp
ecification,Grade,shape,
different type of
cutanduses.,OFF-
handgrinding with
sander,
benchandpedestalgrinde
rs,safetyprecautionswhil
egrinding. (7 Hrs)
21. Perform practice on Drillingmachine
Marking and Drilling - DescriptionandstudyofBe
clear and Blind nchtypeDrillingmachine,
Holes, Sharpening Portable
of Twist Drills Safety electricalDrillingmachine,
precautions to be drillholdingdevices,Work
observed while using a Holdingdevices,Drillbits.
drilling machine. TapsandDies
(10hrs) - HandTapsandwrenches,C
22. Perform practice on alculation of Tap drill
Tapping a Clear and sizesformetricandinchtap
Blind Hole, Selection s.DifferenttypeofDieand
of tape drill Size, use Diestock.Screwextractors
of Lubrication, Use of .
stud extractor. (15 hrs) - HandReamers
23. Perform practice DifferentTypeofhandrea
cutting Threads on a mers,Drillsizeforreaming,
Bolt/ Stud. Adjustment Lapping,Lappingabrasive
of two piece Die, s,typeofLaps.(10 hrs)
Reaming a hole/ Bush
to suit the given pin/
shaft, scraping a given
machined surface.
(25hrs)
ProfessionalSk TraceandTestallElec 24. Perform practice in Basicelectricity
ill92Hrs; trical&Electronicco joining wires using - Electricity principles,
ProfessionalKn mponents&circuits soldering Iron. (20 hrs) - Ground connections,
owledge; and assemble 25. Prepare simple - Ohm's law,
21
Mechanic Diesel
22
Mechanic Diesel
Hrs)
ProfessionalSk Trace&TestHydrauli 32. Identify of Hydraulic Introduction to Hydraulics
ill35 Hrs; cand and pneumatic &Pneumatics
Pneumaticcompone components used in - Description,symbols and
ProfessionalKn nts. (Mapped NOS: vehicle. (10 hrs) application in
owledge;9 Hrs CSC/N0304) 33. Tracing of hydraulic automobile of Gear
circuit on hydraulic pump-Internal &
jack, hydraulic, and External, single acting,
Brake circuit. (15hrs) double acting & Double
34. Identify components in ended cylinder;
Air brake systems Directional control,
(10hrs) Pressure relief valve, Non
return valve, Flow
controlvalveused
inautomobile. (9 hrs)
ProfessionalSk Check&InterpretVe 35. Identifyofdifferenttype - Classification of vehicles
ill25Hrs; hicleSpecificationda sofVehicle.(05 hrs) onthebasisofloadasperce
ProfessionalKn taandVIN.Select&o 36. Demonstrateofvehicle ntralmotorvehiclerule,w
owledge; peratevariousServic specificationdata. heels, final drive, and
5 Hrs eStationEquipment (05hrs) fuelused,axles,positionof
s. (Mapped NOS: 37. Identifyofvehicleinfor engineandsteeringtrans
CSC/N9404) mation Number mission,bodyandload.Bri
(VIN).(05 hrs). ef description
38. DemonstrateofGarage, - UsesofVehiclehoists–
Service Twopostandfourposthois
stationequipments.- t,Engine hoists, Jacks,
Vehiclehoists- Stands. (05 Hrs)
Twopostandfourposth
oist,Enginehoists,Jacks
,Stands.(10hrs)
ProfessionalSk Dismantle&assembl 39. Identifythedifferentpar IntroductiontoEngine:
ill50Hrs; eofDieselEnginefro tsofICEngine(10hrs) - Description of internal &
ProfessionalKn mvehicle(LMV/HM 40. Identifythedifferentpar external combustion
owledge; V)alongwithotherac ts in a diesel engine engines, Classification of
8 Hrs cessories. (Mapped ofLMV/ HMV (10 hrs) IC engines, Principle
NOS: ASC/N9402) 41. Performpracticeonstar &working of 2 & 4-stroke
tingandstoppingofdies diesel engine
elengines.Observeand (Compression ignition
23
Mechanic Diesel
24
Mechanic Diesel
25
Mechanic Diesel
26
Mechanic Diesel
27
Mechanic Diesel
checkendplayremoves
haft-checkseating,
repeat similarly for
connecting rod and
Checkseatingandrefit.(
08hrs)
65. Performcleaningandch - Description of
eckingofcylinderblocks Cylinder block,
.(10 hrs) - Cylinder block
66. Surfaceforanycrack,flat construction,
ness measure - Different type of
cylinderborefortaper& Cylinder sleeves (liner).
ovality,cleanoilgalleryp (05 Hrs)
assageandoilpipeline.
(15hrs)
67. Performreassemblinga
llparts of engine in
correctsequenceandto
rqueallboltsandnutsas
perworkshopmanualof
theengine.(12hrs)
68. Performtestingcylinder
compression,Checkidle
speed. (08hrs)
69. Performremoving&rep
lacing a cam belt,
andadjusting an
engine
drivebelt,replacingane
ngine drivebelt.(05hrs)
Professional Trace, Test 70. Perform practice on NeedforCoolingsystems
Skill50Hrs; &Repair checking & top up - -Heat transfer
CoolingandLubricati coolant, draining & method,
ProfessionalKn on refilling coolant, - Boiling point & pressure,
owledge; Systemof engine. checking / replacing a - Centrifugal force,
10 Hrs (Mapped NOS: coolant hose. (05 hrs) - Vehicle coolant
ASC/N9404) 71. Perform test cooling properties and
system pressure. (04 recommended change of
28
Mechanic Diesel
hrs) interval,
72. Execute on removing - Different type of cooling
& replacing radiator/ systems,
thermostat check the Basic cooling
radiator pressure cap. systemcomponents
(06 hrs) - Radiator, Coolant hoses,
73. Test of thermostat. (03 -
hrs) - Water pump,
74. Perform cleaning - Cooling system
&reverse flushing. thermostat, Cooling fans,
(08hrs) - Temperature indicators,
75. Perform overhauling - Radiator pressure cap,
water pump and Recovery system,
refitting. (07 hrs) Thermo- switch.
76. Perform checking Needforlubricationsystem,
engine oil, draining - Functions of oil, Viscosity
engine oil, replacing oil and its grade as per SAE ,
filter, & refilling engine - Oil additives, Synthetic
oil (07 hrs) oils, The lubrication
77. Execute overhauling of system,
oil pump, oil coolers, Splashsystem,
air cleaners and air - Pressure system
filters and adjust oil - Corrosion/noise
pressure relief valves, reduction in the
repairs to oil flow pipe lubrication system.
lines and unions if - Lubrication system
necessary. (10 hrs) components
- Description and function
of Sump, Oil collection
pan, Oil tank, Pickup
tube, different type of Oil
pump & Oil filters Oil
pressure relief valve,
Spurt holes & galleries,
Oil indicators, Oil cooler.
(10 hrs)
Professional Trace & 78. Execute dismantling Intake&exhaustsystems–
Skill26Hrs; TestIntakeand air - Description of Diesel
29
Mechanic Diesel
30
Mechanic Diesel
ilters.(10hrs) DieselFuelSystems
85. Execute removing a - Description and function
fuelinjectionpumpfro of Diesel fuel injection,
manengine-refit the fuel characteristics,
pump tothe engine re- concept of Quiet diesel
set timing - technology &Clean
filllubricating- dieseltechnology.
oilstartand adjust slow Diesel fuel
speed oftheengine. systemcompo
(15hrs) nents
86. Executeoverhaulingofi - Description and function
njectorsandtestingofin of Diesel tanks & lines,
jector.(15hrs) Diesel fuel filters, water
87. Generalmaintenanceof separator, Lift pump,
FuelInjectionPumps(FI Plunger pump, Priming
P).(10hrs) pump,
- Inline injection pump,
Distributor-type injection
pump, Diesel injectors,
Glow plugs, Cummins &
Detroit Diesel injection.
ElectronicDieselcontrol-
- Electronic Diesel control
systems, Common Rail
Diesel Injection (CRDI)
system, hydraulically
actuated electronically
controlled unit injector
(HEUI) diesel injection
system. Sensors,
actuators and ECU
(Electronic Control Unit)
used in Diesel Engines.
(12hrs)
ProfessionalSk Plan & overhaul 88. Execute Start Marine&StationaryEngine:-
ill25 Hrs; the stationary engine Types,
ProfessionalKn engine and adjustidlingspeedandd - -double acting
owledge Governor and amping device engines,
31
Mechanic Diesel
32
Mechanic Diesel
Evaporation emission
control, Catalytic
conversion,Closed loop,
- Crankcase emission
control, Exhaust gas
recirculation (EGR) valve,
controlling air- fuel
ratios, Charcoal storage
devices, Diesel
particulate filter (DPF).
Selective Catalytic,
Reduction (SCR), EGR VS
SCR (05Hrs)
Professional Carryout 94. Perform removing - Basic Knowledge about
Skill 25 Hrs; overhauling of alternator from vehicle DC Generator & AC
Professional Alternator and dismantling, cleaning Generator.
Knowledge Starter Motor. checking for defects, - Constructional details of
05 Hrs (Mapped NOS: assembling and testing Alternator
ASC/N9407) for motoring action of - Description of charging
alternator & fitting to circuit operation of
vehicles. (15 hrs) alternators, regulator
95. Practice on removing unit, ignition warning
starter motor Vehicle lamp- troubles and
and overhauling the remedy in charging
starter motor, testing system.
of starter motor (10 - Description of starter
hrs) motor circuit,
- Constructional details of
starter motor solenoid
switches, common
troubles and remedy in
starter circuit. (05 Hrs)
Professional Diagnose & rectify 96. Execute - Troubleshooting :
Skill 25 Hrs; the defects in troubleshooting in - Causes and remedy for
Professional LMV/HMV to LMV/HMV for Engine - Engine Not starting
Knowledge ensure functionality Not starting – Mechanical & Electrical
05 Hrs of vehicle. (Mapped Mechanical & causes,
NOS: ASC/N9408) Electrical causes, High - High fuel consumption,
33
Mechanic Diesel
4. Dimensioning
• Types of arrowhead
• Leader line with text
• Position of dimensioning (Unidirectional, Aligned)
5. Symbolic representation –
• Different symbols used in the related trades of Mechanic
Auto
Body Repair / Electrical and Electronics / Diesel / Tractor /
Two and Three-wheeler.
6. Concept and reading of Drawing in
• Concept of axes plane and quadrant
• Concept of Orthographic and Isometric projections
• Method of first angle and third angle projections
(definition
and difference)
7. Reading of Job drawing related to Mechanic Auto Body
34
Mechanic Diesel
Repair /
Electrical and Electronics / Diesel / Tractor / Two and
Three-wheeler trades.
WORKSHOP CALCULATION & SCIENCE: (40 Hrs)
Professional Demonstrate basic WORKSHOP CALCULATION & SCIENCE
Knowledge mathematical Unit, Fractions
WCS- 40 Hrs. concept and Classification of unit system
principles to Fundamental and Derived units F.P.S, C.G.S, M.K.S and SI
units
perform practical
Measurement units and conversion
operations. Factors, HCF, LCM and problems
Understand and Fractions - Addition, substraction, multiplication &
explain basic division
science in the field Decimal fractions - Addition, subtraction, multiplication&
of study. (Mapped division
NOS: CSC/N9402) Solving problems by using calculator
Square root, Ratio and Proportions, Percentage
Square and square root
Simple problems using calculator
Applications of Pythagoras theorem and related problems
Ratio and proportion
Ratio and proportion - Direct and indirect proportions
Percentage
Percentage - Changing percentage to decimal and fraction
Material Science
Types metals, types of ferrous and non ferrous metals
Physical and mechanical properties of metals
Introduction of iron and cast iron
Difference between iron & steel, alloy steel and carbon
steel
Properties and uses of rubber, timber and insulating
materials
Mass, Weight, Volume and Density
Mass, volume, density, weight and specific gravity,
numerical related to L,C,O section only
Related problems for mass, volume, density, weight and
specific gravity
Speed and Velocity, Work, Power and Energy
Speed and velocity - Rest, motion, speed, velocity,
difference between speed and velocity, acceleration and
retardation
Speed and velocity - Related problems on speed & velocity
Work, power, energy, HP, IHP, BHP and efficiency
35
Mechanic Diesel
36
Mechanic Diesel
Learning outcomes, assessment criteria, syllabus and Tool List of Core Skills subjects which
is common for a group of trades, provided separately inwww.bharatskills.gov.in/dgt.gov.in
37
Mechanic Diesel
ANNEXURE-I
38
Mechanic Diesel
39
Mechanic Diesel
40
Mechanic Diesel
41
Mechanic Diesel
42
Mechanic Diesel
43
Mechanic Diesel
44
Mechanic Diesel
45
Mechanic Diesel
46
Mechanic Diesel
ABBREVIATIONS
47
Mechanic Diesel
48