Compendium Packaging Regulations 09-09-2022
Compendium Packaging Regulations 09-09-2022
1. Short Title and Commencement. - (1) These regulations may be called the Food
Safety and Standards (Packaging) Regulations, 2018.
(2) They shall come into force on the date of their publication in the Official Gazette and
Food Business Operator shall comply with all the provisions of these regulations by 1st
July, 2019.
1
Version-IV (09.09.2022)
(i) “specific migration limit” means the maximum permitted amount of a
given substance released from a material or article into food or food
simulants.
(2) All other words and expressions used herein and not defined, but defined in
the Act, rules or regulations made thereunder, shall have the meanings assigned
to them in the Act, rules or regulations, respectively.
3. General Requirements. - (1) Every food business operator shall ensure that the
packaging material used shall be in accordance with these regulations:
Provided where Indian Standards are not available, then relevant International
Standards may be complied with.
(2) Any material which comes in direct contact with food or likely to come in contact with
food used for packaging, preparation, storing, wrapping, transportation and sale or service
of food shall be of food grade quality.
(3) Packaging materials shall be suitable for the type of product, the conditions provided
for storage and the equipment for filling, sealing and packaging of food as well as
transportation conditions.
(4) Packaging materials shall be able to withstand mechanical, chemical or thermal stresses
encountered during normal transportation. In case of flexible or semi-rigid containers, an
overwrap packaging may be necessary.
(5) Food products shall be packed in clean, hygienic and tamper-proof package or
container.
(6) The sealing material shall be compatible with the product and the containers as well
as the closure systems used for the containers.
(7) Tin containers once used, shall not be re-used for packaging of food.
(8) Plastic containers of capacity 5 litre and above and Glass bottles, which are reused for
packaging of food, shall be suitably durable, easy to clean or disinfect.
(9) Printing inks for use on food packages shall conform to IS: 15495.
(10) Printed surface of packaging material shall not come into direct contact with food
products.
2
Version-IV (09.09.2022)
(11) Newspaper or any such material shall not be used for storing and wrapping of food.
(12) In case of multilayer packaging the layer which comes in direct contact with food
or layers likely to come in contact with food shall meet the requirements of packaging
materials specified in Schedule I, II and III of these regulations.
(13) The materials listed in Schedule I, II and III of these regulations shall be compatible
with their intended use as a packaging material so as not to alter the quality and safety
of the food product.
(14) Every food business operator shall obtain the certificate of conformity issued by
NABL accredited laboratory against these regulations for the packaging material which
comes in direct contact with food or layers likely to come in contact with food to be
used.
4. Specific Requirements for Primary food packaging. - (1) Paper and board
materials intended to come in contact with food products-
(a) Paper and board material shall be of uniform formation, thickness and substance.
(b) It shall be free from visible specks, grease marks, cuts, pinholes and other blemishes.
(c) The paper used for the manufacture of boxes, cartons, plates, cups and paper lids or
paper which are meant to be direct in contact with food shall be of food grade and shall
be free from contaminants.
(d) Paper and board materials used for the manufacturing of containers for packing or
storing the food products shall conform to either of the Indian Standards specifications as
provided in Schedule – I.
(2) Glass containers intended to come in contact with food products- (a) As far as
possible, they shall be free from blisters, mould marks, stones and chippings and as far as
possible shall be free from cords, seeds and other visible defects.
(b) They shall have a smooth surface without cracks, pinholes and sharp edges.
(c) The sealing surface shall be free from hairline cracks and prominent seam marks.
(3) Metal and Metal Alloys intended to come in contact with food products-
3
Version-IV (09.09.2022)
(a) A utensil or container made of the following materials or metals, when used in the
preparation, packaging and storing of food shall be deemed to render it unfit for
human consumption: -
(b) Appropriate grades of metal and metal alloys where applicable shall be used for
packing or storing of food products.
(c) Metal and metal alloys used for the manufacturing of containers for packing or
storing the food products shall conform to either of the Indian Standards
specifications as provided in Schedule – II.
(a) Plastic materials used for the manufacturing of containers for packing or storing the
food products shall conform to either of the Indian Standards specifications as
provided in Schedule – III:
Provided that Drinking Water (both Packaged and Mineral Water) shall be
packed in colourless, transparent and tamper-proof bottles or containers made of
polyethylene (PE) conforming to IS: 10146 or polyvinyl chloride (PVC) conforming
to IS: 10151 or polyalkylene terephthalate (PET and PBT) conforming to IS: 12252
or polypropylene (PP) conforming to IS: 10910 or food grade polycarbonate
conforming to IS: 14971 or polystyrene conforming to IS: 10142 or sterile glass
bottles only. The transparency of a container shall not be less than 85 percent in
light transmittance:
4
Version-IV (09.09.2022)
the water to be packaged may also be used. In such cases requirements of
transparency would not apply.]
(b) All packaging materials of plastic origin shall pass the prescribed overall migration
limit of 60mg/kg or 10mg/dm2 when tested as per IS 9845 with no visible colour
migration.
(c) Plastic materials and articles shall not release the substances in quantities
exceeding the specific migration limits listed under Table 1.
(d) Pigments or Colorants for use in plastics in contact with food products and drinking
water shall conform to IS: 9833.
(e) Products made of recycled plastics including carry bags shall not be used for
packaging, storing, carrying or dispensing articles of food.
Substitution of highlighted provision
[(e) Products made of recycled plastics including carry bags may be used for
packaging, storing, carrying or dispensing of food products as and when standards
and guidelines are framed by the Food Authority. Such packaging materials shall
also comply with any other national standards/regulations as applicable.]
[Operationalized w.e.f. 18th January, 2022 vide Direction F.No.STD/SC/A-40 dated
18th January, 2022
Table 1
Requirement for specific migration limits of substances from plastic materials
intended to be in contact with articles of food
1. Barium 1.0
2. Cobalt 0.05
3. Copper 5.0
4. Iron 48.0
5. Lithium 0.6
5
Version-IV (09.09.2022)
6. Manganese 0.6
7. Zinc 25.0
2
[8. Antimony 0.04
5. A list of suggestive packaging materials which may be used for packaging of food
products falling under the specified categories is provided in Schedule – IV:
Provided that this is an indicative list not restricting the use of any other packaging
material complying with the specified standards.
Schedule – I
Paper and board materials intended to come in contact with food products
Note: The wax used for coating the paper or board shall be paraffin wax conforming to
Type I of IS 4654.
Schedule – II
Metal and Metal Alloys intended to come in contact with food products
6
Version-IV (09.09.2022)
2. Cold reduced Electrolytic Chromium or Chromium Oxide – Coated Steel - IS
12591/ISO 11950
3. Wrought Aluminium and Aluminium Alloy Sheet and Strip for General
Engineering – IS 737
4. Aluminium and Aluminium Alloy Bare Foil for Food Packaging – IS 15392
5. Specification for Crown Closures – IS 1994
6. Specification for Round Open Top Sanitary Cans for Foods and Drinks – IS
9396 (Part 1)
7. Specification for Round Open Top Sanitary cans for Foods and Drinks – IS
9396 (Part 2)
Schedule – III
Plastic Materials intended to come in contact with food products
7
Version-IV (09.09.2022)
pharmaceuticals and drinking water – IS 12247
9. Specification for Ethylene Vinyl Acetate (EVA) copolymers for its safe use in
contact with foodstuffs, pharmaceuticals and drinking water – IS 13601
10. Specification for Ethylene Metha Acrylic Acid (EMAA) copolymers and
terpolymers for its safe use in contact with foodstuffs, pharmaceuticals and
drinking water – IS 13576
11. Specification for Polycarbonate Resins for its safe use in contact with foodstuffs,
pharmaceuticals and drinking water – IS 14971
12. Specification for Flexible Packaging Materials for packaging of Edible Oils, Ghee
and Vanaspati - IS 14636
13. Specification for Polyalkylene Terephthalates (PET & PBT) for Moulding and
Extrusion – IS 13193
14. Specification for Polyethylene Films and Sheets – IS 2508
15. Specification for Linear Low Density Polyethylene (LLDPE) Films – IS 14500
16. Specification for High Density Polyethylene Materials for Moulding and
Extrusion – IS 7328
17. Specification for Melamine-Formaldehyde Resins for its safe use in contact
with foodstuffs, pharmaceuticals and drinking water – IS 14999
18. Low Density Polyethylene Films – IS 2508
19. Blow Moulded Polyolefin Containers - Part 2 : Over 5 Litres, Up to and
Including 60 Litres Capacity – IS 7408
20. Stretch Cling Films – IS 14995
Schedule – IV
List of suggestive packaging materials
8
Version-IV (09.09.2022)
Rigid Plastic container made of PET with plastic
(polypropylene (PP) or High-density
polyethylene (HDPE)) caps.
Rigid Plastic container made up of High density
polyethylene (HDPE) or Polypropylene (PP) or
Polystyrene (PS) with Plastic (PP or High-density
polyethylene (HDPE) caps.
Flexible plastic pouch made of polyethylene (PE)
or Polypropylene (PP) based co-extruded
multilayered material.
Aseptic and flexible packaging material (Paper
board or Aluminium foil or polyethylene) based
multilayered structure.
Tin plate container.
Paper based lined cartons with liner made of
aluminium foil based laminated structure.
Plastic based polypropylene (PP) or polystyrene
(PS) cups with paper or Peel-off lid.
Wax coated paper butter wrappers.
Paper and Paper Board based folding carton
inside butter wrapped with butter paper.
Metal Containers with plastic polypropylene (PP)
caps or metal or plastic lid.
Plastic pet container with plastic lid.
Thermoform cup or tray with paper or peel-off
lids.
Paper and Paper Board setup boxes with or
without lamination –plastic film inside.
Paper and Paper Board setup boxes with or
without grease proof paper placed inside.
9
Version-IV (09.09.2022)
Plastic Based multi layered flexible laminated
heat sealed pouch.
Mud or clay pots.
Thermoformed Plastic container (blister pack)
with aluminium foil or polyethylene (PE) based
lid
10
Version-IV (09.09.2022)
Aseptic and flexible packaging material (Paper
board or Aluminium foil or polyethylene) based
multilayered structure.
Plastic rigid container (jar) made of either High-
density polyethylene (HDPE) or Co-extruded
structure with Plastic (polypropylene (PP) or
High-density polyethylene (HDPE) caps.
Stand up Pouch made up of Plastic based
structure with plastic spout.
Flexible Plastic pouch made of either
polyethylene (PE) or Laminated structure.
Thermoformed Plastic container (blister Pack)
with aluminium foil or polyethylene (PE) based lid.
11
Version-IV (09.09.2022)
Plastic cups with film lid.
5. Cereals and cereal Tin container.
products Aluminium Foil Based laminated pouch in metal
container.
Wrapper made of wax coated paper.
Wrapper made of three layered laminated
structure.
Plastic based multilayered laminated pouch (heat
sealed).
Plastic based thermoform container with plastic
lid.
Lined carton with liner made of multi layered
laminated structure.
Plastic based multilayered laminated structured
Zipper pouch.
Thermoform trays with plastic lids or over wraps.
Glass bottle with metal caps.
Polyethylene terephthalate (PET) or Plastic based
rigid containers with metal or plastic
(polypropylene (PP) or High-density polyethylene
(HDPE) caps
Plastic films or co-extruded film or polypropylene
(PP) or polyethylene (PE)
6. Meat and Meat Products Glass jars with plastic (polypropylene (PP) or
or Poultry Products High-density polyethylene (HDPE) caps.
Metal Containers with metal lid (lacquered tin
containers).
Plastic based flexible pouches in paper & paper
Board carton.
Plastic based multilayered flexible laminates heat
sealed pouches.
Plastic tray with overwrap.
12
Version-IV (09.09.2022)
Aluminium foil wrap.
Polyethylene terephthalate (PET) punnets or
containers with plastic caps
7. Fish and fish products or Glass jars with plastic (PP or High-density
Seafood polyethylene (HDPE) caps.
Metal Containers with metal lid (lacquered tin
containers).
Polyethylene terephthalate (PET) punnets or
containers with plastic caps.
Plastic based multilayered flexible laminates heat
sealed pouches.
Plastic tray with overwrap.
8. Sweetening agents Glass bottle with Metal Caps or Plastic
including Honey (polypropylene (PP) or High-density polyethylene
(HDPE) Caps.
Plastic based Thermoformed container.
Blister Pack with foil or polyethylene lid.
Polyethylene Terephthalate (PET) container with
Plastic Caps.
Plastic laminated Tube.
9. Salt, spices, Condiments Glass bottle with metal lid or plastic
and related products (polypropylene (PP) or High-density polyethylene
(HDPE) caps.
Plastic based rigid container with Plastic cap
(Polyethylene terephthalate (PET) and High-
density polyethylene (HDPE) Containers).
Paper & Paper board or Aluminium foil or Plastic
Film based Composite Container.
Folding cartons with Plastic based flexible
laminated structure (heat sealed) pouch placed
inside.
13
Version-IV (09.09.2022)
Plastic based multilayered layered laminated
pouch (heat sealed).
10. Beverages (other than Plastic bottles made of either Polyethylene
Dairy and Fruits & terephthalate (PET) or Polycarbonate (PC) with
vegetables based) Plastic (Polypropylene (PP) or High-density
polyethylene (HDPE) or Aluminium caps.
Heat sealed Plastic pouches made of Polyethylene
(PE).
Glass bottles with metal caps or plastic caps.
Plastic pouches made up of Polyethylene (PE) in
Corrugated fibre board Boxes.
Aluminium can with easy open end.
Tin plate container.
Plastic pouch made of laminated structure.
Aseptic and flexible packaging material (Paper
board or Aluminium foil or polyethylene) based
multilayered structure.
Plastic based multi layered structure heat sealed
pouches.
Plastic based multi layered structure heat sealed
Zipper pouches or stand up pouches.
Metal Containers with plastic or Polypropylene
(PP) caps or metal or plastic lid, Rigid Plastic
container with plastic caps (Polypropylene (PP)
Caps).
Wooden cask (for wines).
Note. - The Food Safety and Standards (Packaging) Regulations, 2018 were published in
the Gazette of India, Extraordinary, Part III, Section 4 vide notification number File No. 1-
95/Stds/Packaging/SP(L&C/A)/FSSAI-2017, dated the 24th December, 2018 and
subsequently amended vide notification numbers:
14
Version-IV (09.09.2022)
2. F.No. Std/SP-20/T(Migration-N), dated 30th August 2022.
15
Version-IV (09.09.2022)