Danielle Nicole Saguindel 11

GAS

Basic Dance Terminologies

Adagio: Used to describe slow, sustained movements within ballet dances. Adagio
exercises focus on slow, controlled movements that require balance, extension,
strength, and poise.
Allegro: A type of ballet dance that involves a fast or moderate tempo. Allegro dance is
typically made up of fast turning or jumping movements.
Aplomb: A stationary position in ballet.
Arabesque: A common ballet position in which the dancer stands on one leg with the
other leg extended backward at a 90 degree angle.
Arm styling: Positioning and movement of the arms within ballet dance. Arm styling is
used to reflect the character and style of the dance.
Attitude: A ballet dance position in which the dancer raises one leg and bends their
knee while simultaneously raising one arm.
Backspin: A breakdancing move in which the dancer balances weight on their upper
back and spins their body by pushing their hands against the ground.
Ball change: A dance move in which the dancer’s weight is partially transferred to the
ball of one foot, followed by a step on the other foot.
Ballerina: Italian term for a female ballet dancer. Prima ballerina, otherwise known as
the first dancer, is a term used to describe ballet dancers who take on leading roles.
Ballerino: Italian term for a male ballet dancer.
Ballet: A form of dance that is classical and theatrical in nature. Ballet is performed on
stage and makes use of costumes, scenic design, and lighting to tell a story or express
an emotion.
Ballon: A ballet dancer’s ease of jumping. Ballon essentially describes a dancer’s ability
to remain suspended in the air during a jump.
Ballroom dance: Social dances performed by a couple. In ballroom dancing, couples use
step-patterns and move rhythmically to express the characteristics of the music.
Ballroom dancing consists of two styles – Smooth / Standard and Rhythm / Latin.
Barrel jump: A turning jump inwhich the dancer’s body is parallel with or horizontal to
the floor.
Breakdancing: An energetic form of dance that involves stylized footwork and floor
movements such as spins, freezes, poses. Also known as breaking or b-boying,
breakdancing was born in New York City in the late 1960s and early 1970s and was
popularized by African Americans and Latinos.
Cabriole: A ballet dance move in which the dancer leaps in the air, beats their lower leg
against their upper leg at an angle, then lands on the ground with th lower leg.
Cambre: A ballet position in which the dancer bends at the waist, either to the side or
to the back.
Choreography: The compilation of steps, patterns, and movements that make up a
dance routine.
Ciseaux: A ballet dance move in which the dancer leaps in the air, opens their legs so
that their feet are wide apart, then closes them upon landing. The dancer’s body is
meant to resemble a pair of scissors.
Croisee: A ballet dance position in which the dancer holds their body at an oblique
angle and places their working leg across the line of their body.
Cuban motion: The rhythmic swaying of the hips often observed in Latin and Rhythm
ballroom dances. Cuban motion is caused by the bending and straightening of the
knees, which allows the hips to move from side to side. Cuban motion is more
noticeable in slow dances such as the Rumba and Bolero.
Cypher: An event in which a group of dancers gather together in a circle and everyone
takes turns dancing in the center. Cyphers are also referred to as freestyle circles.
Dances that occur within cyphers are typically improvisational in nature.
Drop: A theatrical ballroom dance move in which the follower’s body weight is partially
or completely supported by the leader while a part of the follower’s body remains in
contact with the floor.
Entrechat: A ballet move in which the dancer repeatedly crosses their legs in the air.
Fifth position: One of five ballet positions. When in fifth position, the dancer’s feet are
turned outwards from each other while both arms are rounded above the head.
First position: One of five ballet positions. When in first position, the dancer’s heels are
touched together and the toes are pointed outward, forming a line with the feet.
Additionally, the dancer’s arms should be rounded.
Fourth position: One of five ballet positions. When in fourth position, the dancer’s right
foot should be turned out in front of the left foot while the left arm is rounded over the
head. The dancer’s right arm should be rounded in front, just like it would be in first
position.
Freestyle: An improvisational form of dancing that allows dancers to express their
individual style. Freestyle dancing involves spontaneous movements that are not
choreographed ahead of time.
Freeze: A move done in breakdancing where the dancer stops their performance and
holds a position, typically balancing on their shoulder, head, or hands.
Gyro: A breakdancing move in which the dancer continuously rotates on one shoulder
while their feet are extended in the air and their legs are spread apart. The gyro is also
known as the Windmill or Helicopter.
Hand spin: Also known as the hand glide, this is a breakdancing move in which the
dancer spins on one hand with their body positioned parallel to the ground.
Head spin: A breakdancing move in which the dancer assumes a headstand position
and spins by pushing their hands against the ground.
Lead and follow: This concept is an essential part of ballroom dancing. Partner dancing
requires one person to take the lead while the other person follows. Leaders initiate
movement, transitions, and guide their partner through the dance. Meanwhile, the
follower reacts to the leader’s movements and follows to create a unified dance.
Line of dance: In ballroom dancing, this refers to the imaginary line on the floor meant
to represent the flow of traffic for dancers. The line of dance always moves in a
counterclockwise direction to prevent dancers from accidentally making contact with
each other. Travelling dances such as the foxtrot, tango, and waltz make use of the line
of dance.
Locking: A breakdancing technique in which the dancer repeatedly collapses their body
then locks it back into shape.
Open and closed position: Positions in ballroom dancing. Closed position refers to a
couple holding each other while standing face to face. Meanwhile, open position refers
to a couple standing apart from each other. When assuming an open position, partners
have the option to face inward or outward, hold one or both hands, or stand
independently of each other.
Plie: A ballet dance position in which the dancer bends their knees while holding their
torso upright.
Popping: A breakdancing technique in which the dancer continuously flexes their
muscles to the beat of the music. A common popping move is to form arm and body
waves so that it appears as if an electrical current has passed through the dancer's
body.
Promenade: In ballet, this is when a dancer slowly pivots their body while standing on
one leg.
Rhythm / Latin: A form of ballroom dance that includes the cha-cha, rumba, east coast
swing, bolero, and mambo. This style of ballroom dance emphasizes vibrant displays of
energy and personal flair.
Saute: In ballet, this is a simple jump in the vertical direction.
Second position: One of five ballet positions. When in second position, the dancer’s feet
should be separated about shoulder-width apart with the toes turned outward.
Additionally, the dancer’s arms should be outstretched and slightly rounded.
Smooth / Standard: A form of ballroom dance that includes the waltz, tango, foxtrot,
and Viennese waltz. This style of ballroom dance emphasizes the elegance, grace, and
fluidity of movement. Dancers rotate in a counterclockwise direction across the dance
floor and constantly transition from one place to the next in a fixed pattern.
Spotting: A technique used in ballroom dancing to reduce dizziness during spins and
turns. When spotting, a dancer chooses a reference point to focus on for as long as
possible while spinning or turning. When the dancer can no longer see the reference
point during their spin or turn, they quickly whip their head around to spot the
reference point again.
Third position: One of five ballet positions. When in third position, the dancer’s left foot
should be placed forward while the heel of the right foot is placed against the arch of
the left foot. The dancer’s right arm should be extended out to the side while the left
arm is rounded over the head.
Tour: In ballet, this is a turn of the body.
8-count: The manner in which music is counted and broken down. Hip-hop dances are
typically choreographed to eight counts at a time.