Mew Pattern
Mew Pattern
By 1Up Crochet
About This Pattern
-While making this amigurumi you will work in continuous rounds, unless told
otherwise. Use a stitch maker to mark end of your rounds.
-The finished amigurumi should measure approximately 8.5 inches tall in a sitting
position. Size may vary, depending on yarn type and personal yarn tension.
-Instructions that need to be repeated will be marked with brackets followed by the
number of times it needs to be repeated.
Example:
Important Information
You may not claim this pattern as your own. You may not alter, copy, sell, or
redistribute this pattern in whole or in part.
This pattern is intended for personal use only.
If you use publish photos of items made from this pattern I ask that you please give
me credit as the original designer of the pattern. It's always a good idea to give
credit where credit is due.
I DID NOT CREATE THIS CHARACTER. MEW IS COPYRIGHT THE POKEMON
COMPANY. THIS PATTERN IS NOT AFFILIATED WITH, ENDORSED BY, OR
SPONSORED BY THE POKEMON COMPANY. THIS PATTERN IS NOT
BRANDED AS ANYTHING AFFILIATED WITH SAID FRANCHISE.
Abbreviations
Head
Round 15) 3 inc, 5 sc, {in Front Loops: 3 sc, 6 inc, 3 sc}, 5 sc, 3 inc, 26 sc (66)
Finish with a slip stitch and leave a long tail for sewing. Do not close off. Stuff the head.
Body
Finish with a slip stitch and leave a long tail for sewing. Stuff the body.
Hips
Foot
Arms
Stuff the arm. Only lightly stuff towards the opening. Fold the opening flat and then sc
across the opening to close the arm. Leave a long tail for sewing.
Ears
Finish with a slip stitch and leave a long tail for sewing. Stuff the ear.
Tail
Round 12) sc around (9) Stuff the end of the tail, then continue to the next round.
Round 18) -Round 70) sc around (5) Finish with a slip stitch.
Take your stem wire and bend the end around so that the end is blunt. This will prevent
it from poking through the tail. Insert it into the tail and run it all the way up to the end of
the tail. You should still have a few inches of extra wire sticking out of the open end.
This will be inserted into the body during assembly.
To make the Pokeball you will need Purple, Black, and White yarn.
Cut two soft triangle shaped eyes from the white felt and two small ovals from the white
felt. Cut two smaller triangle shapes from the blue felt. Trim them to fit the face.
Cut two small circles of pink felt and apply them to the mid front of the feet.
Tip: looking at reference photos of mew can really help with getting the shape and size
of the eyes correct.
Assembly