Semperflex: Mineral oil hoses - TUC 20 Page 1 of 1
Mineral oil hoses
TUC 20 Multi-Purpose Mineral Oil Hose
Applications: Temperature range: -40°C / +100°C.
Flexible delivery hose for suitable for mineral oil and fuels with Safety factor: 3 : 1 maximum aromatic content of 40 % and compressed air. Tube: Synthetic rubber, black, smooth, antistatic, oil resistant. Multi-purpose hose for diverse applications in industry, Reinforcement: Textile spiral construction. construction and agriculture. Cover: Synthetic rubber, black, smooth, antistatic, abrasion For fuel application as a drop hose only. resistant, oil and weather resistant. Features: Identification:Continuous marking, white: „SEMPERIT S TUC Additional dimensions upon request. 20 Öl/Luft Oil/Air PN 20 bar Antistatic MADE IN EU“.
Inside Ø No. of Bending Weight
Wall thickn. Outside Ø Work. pressure Standard coil length Article number reinforce- radius approx. mm Inches mm mm bar (max) m ments min. mm Kg/m 68112 0630 6,0 1/4 3,0 12,0 20 2 40 0,15 50 68112 0835 8,0 5/16 3,5 15,0 20 2 50 0,20 50 68112 1035 10,0 3/8 3,5 17,0 20 2 60 0,22 50 68112 1335 13,0 1/2 3,5 20,0 20 2 80 0,30 50 68112 1640 16,0 5/8 4,0 24,0 20 2 100 0,40 50 68112 1945 19,0 3/4 4,5 28,0 20 2 120 0,50 50 68112 2550 25,0 1 5,0 35,0 20 2 150 0,73 50 68112 3250 32,0 1 1/4 5,0 42,0 20 4 190 0,75 50 68112 3860 38,0 1 1/2 6,0 50,0 20 4 230 1,10 50 Please note: General information about our range of products can be found in the Important notice: This catalogue has been prepared with the greatest care in order to appendix to this catalogue. Before using with new or untested media, or before using in provide you with all the information you need. The information contained herein applications that are not covered in the product information, written advice must first be incorporates the latest state-of-the-art technology, and is the result of trials and tests obtained from a specialist dealer or a Semperit application engineer. All products must carried out over many years, or conforms to the resistance requirements of the media be inspected regularly for operational safety. For safety reasons, hoses must be replaced listed as set out in ISO TR 7620:2005 (E). The individual conditions of use affect the use of in the event of damage, especially if the cover is damaged. All products must be stored each product. They therefore only ensure the safety that can be expected assuming that and maintained according to our storage, care and maintenance instructions, and the specifications in our written product information, the specifications regarding resistance according to DIN 7716:1982. to chemicals and our cleaning procedures are all complied with. We cannot guarantee this We are constantly developing and improving our products for our customers. For the level of safety in the event of improper handling, e.g. squashing, rupturing, stretching or latest product information, please visit our website www.semperflex.com regularly or filling with media that are not permitted. Unless specified otherwise, all hoses are contact one of our specialist dealers or Semperit application engineers. Contracts are manufactured to EN ISO 1307:2006. agreed according to our general terms and conditions. Subject to change without notice.