Internal Combustion Pneumatic Tyre

1.0–3.5 ton
1

SETTING NEW STANDARDS

Mitsubishi

Series Forklift Trucks

A next generation, higher performance machine.

Thanks to the application of new technologies, the

Mitsubishi Grendia is not only easier to operate but
friendly to the environment as well.

The new Mitsubishi Grendia’s engine is very fuel-

efficient and has ultra low emissions, which either
complies with or exceeds the latest international environmental
standards. In addition to its newly designed engine, Mitsubishi
Forklift Trucks has increased rider comfort and enhanced
FGE15N
Electronically controlled gasoline engine
safety. For instance, all Grendia forklift trucks incorporate
Capacity rating 1500kg @ 500mm load center an Integrated Presence System (IPS), which enhances safety
and helps reduce accidents. LCD graphic displays and
digital monitoring systems also make the Grendia safer and
more efficient.

It’s the forklift of tomorrow that’s available today.

MOVING AHEAD
FD25N
Diesel engine
Capacity rating 2500kg @ 500mm load center
3

GRENDIA’S ECO-POWER
MEETS THE ENVIRONMENTAL REQUIREMENTS OF
TODAY AND TOMORROW.

NEW2007 EMISSION STANDARDS COMPLIANT*: TWO-LEVEL HIGH/LOW

NEW ELECTRONICALLY CONTROLLED GASOLINE ENGINE SPEED LIMITER
Mitsubishi Grendia’s advanced gasoline engine, which helped pioneer the standard use of The Grendia’s automatic
electronically controlled fuel injection and three-way catalytic converters in forklift trucks, speed limiter can be set to
has evolved even further. The new Grendia has achieved remarkable environmental two levels – outdoors (HIGH)
controls and complies with all 2007 Emission Standards while still maintaining high and indoors (LOW).
performance and reliability levels. Drivers can alternate between the two
* 2007 Emissions Standard for Specific Special Vehicles (including off-road vehicles) speed limits at the flick of a switch, helping
Compliant with Emissions Standard for Specific Special Vehicles
Ministry of the Environment them to choose the most appropriate fuel
Ministry of Economy, Trade and Industry efficiency for the location.
Ministry of Land, Infrastructure and Transport • Standard for Electronically Controlled Gasoline
Engine Trucks

POWER/SOFT MODE SWITCH

Depending on the task, two power
levels can be selected: POWER
mode, which maximizes power
output and SOFT mode for fuel
efficiency and low noise levels.
Electronically controlled gasoline engine K25E Three-way catalytic converter
Selecting SOFT mode cuts CO2
emissions by approximately 13% compared
to the POWER mode.
• Standard for Electronically Controlled Gasoline
Engine Trucks
2007 EMISSION STANDARDS ECO-FRIENDLY VEHICLES
OPTIONAL LPG powered version

COMPLIANT*: HIGH RELIABILITY WITH CLEAN EXHAUST EMISSIONS

DIESEL ENGINE Besides the gasoline-powered and diesel-
The well-known performance levels of powered models, the Grendia is also available
the highly acclaimed Mitsubishi Diesel in other clean exhaust, energy-efficient models.
Engine have been maintained but now These include LPG-powered or diesel trucks
come with eco-friendly refinements. The fitted with DPF (Diesel Particulate Filter) that
upgraded engines have now achieved helps eliminate possible black smoke.
low emission levels in compliance with
the 2007 Emission Standards without Vehicle fitted with DPF helps eliminate
black smoke.
compromising horsepower or reliability.
• 2007 Emissions Standard for Specific Special
Vehicles (including off-road vehicles)
Compliant with Emissions Standard for Specific
Special Vehicles
Ministry of the Environment
Ministry of Economy, Trade and Industry
Ministry of Land, Infrastructure and Transport

The ceramic DPF filter recovery unit is fitted

inside the right-side step of the machine.

Swirl-chamber diesel engine S4S

DPF exhaust monitor. Displays filter levels

LOW-NOISE DESIGN FOR and necessary recovery time.
MAXIMUM COMFORT WITH
MINIMAL OPERATOR FATIGUE
With features such as low-noise engine,
enhanced soundproofing of the engine
compartment and floor level noise
dampening, Mitsubishi Forklift Trucks has
achieved a quiet working environment
both for the operator and the surrounding
working environment.
• ISO-equivalent noise level (When diesel engine is in
SOFT mode at high idle speed)
5

“SAFETY FIRST”
– YET ANOTHER GRENDIA HALLMARK

INTEGRATED PRESENCE
SYSTEM – “IPS”
Grendia is fitted with Mitsubishi’s IPS, an integrated active safety system
designed to improve vehicle safety by actively detecting problems before
they become accidents. It not only ensures safety during vehicle operation
but also prevents errors when the operator is not seated, protecting both
the operator and the workplace from potential accidents.

NEW INTEGRATED DIGITAL MONITORS

In the cab, digital displays are used to provide easier
monitoring of systems and controls. The digital panel
Vehicle speed display Load weight display
illuminates when the ignition is switched on allowing
speed, load weight and system monitors to be checked
at a glance.
(Optional)

MAST AND TRAVEL INTERLOCK

Mitsubishi Grendia forklift trucks are equipped with mast
and travel interlock protection device that is linked to the
operator’s seat. If the operator is not seated, the mast and
(for torque-converter models) the movement of the vehicle
itself, is automatically locked in order to prevent injury or
damage to property.
• Note that brakes are not applied in travel interlocking, so trucks can still
move on slopes due to gravity.

LIFT LOCK
The fork on the Mitsubishi Grendia is automatically locked
when the ignition is switched off, so it remains in position
even if the lift lever is accidentally bumped or moved.

NEUTRAL SAFETY
A Neutral Safety device, which prevents the engine from
starting unless the forward/backward lever is positioned at
neutral, is now built in on all vehicles, including all torque-
converter-fitted vehicles and all direct drive vehicles.
INNOVATIVE AND RELIABLE SAFETY FEATURES HELP
PROTECT OPERATORS AND WORKPLACE
HIGH-MOUNTED REAR OPTIONAL
COMBINATION LAMP HORIZONTAL DEPLOYMENT OF
All Mitsubishi Grendias are installed with THE FORK AT THE FLICK OF A
rear combination lamps above the head SWITCH – ALS*
guard that clearly signals braking or Mast Vertical-Setting Mechanism
stopping to vehicles or persons behind
The mast can be automatically set vertically
the forklift truck.
simply by pushing the tilt lever forward
while pressing the switch, facilitating
horizontal fork deployment.
* Automatic Levelling System

• Positions will differ for forklifts requiring vehicle inspections in Japan.

WIDE FORWARD VISIBILITY

CLEAR REAR VISIBILITY
Unlike some forklift trucks, Mitsubishi
Grendias have wide unobstructed visibility
that extends from the tip of the fork to the
top of the mast. Greater rear visibility is
made possible by the Grendia’s compact
tail design.

Easy rear Wide forward

visibility visibility
7

POWERFUL, SMOOTH AND COMPACT.

EXCELLENT PERFORMANCE
FOR SPEEDY WORK.
POWERFUL LIFTING CAPACITY
Mitsubishi Grendias are constructed with a low center of gravity frame that optimizes
vehicle balance and stability during lifting. That means a greater load capacity with
much greater stability. The high-torque, high-power engine maintains a stable lift speed
regardless of the load, helping operators to increase productivity.
EXCELLENT LIFTING ABILITY

Lift speed:
640mm/s (when loaded)
660mm/s (when not loaded) • FGE25ZN
No capacity deration up to a height of 4 meters (2-stage mast).

SOFT LANDINGS

Another exclusive feature found on the Mitsubishi Grendia is soft

landing system that activates when the fork nears the ground,
automatically protecting loads from hard drops or shocks.
• Only for two-stage masts.

SMOOTH RUNNING
The high power engine and the high performance transmission are perfectly matched to
produce an extremely smooth start/acceleration as well as excellent traction even on uphill
slopes. Excellent breaking and stopping control is provided by a robust and reliable duo-
servo system.
SMOOTH ACCELERATION POWERFUL UPHILL ABILITY

10mm acceleration 3.1seconds (unloaded) 12-foot uphill velocity 5.0km/h (unloaded)

• FD25N • FD25N

COMPACT TURNING EXCELLENT STEERING ABILITY GRENDIAS ARE EASY TO MANEUVER EVEN IN
CRAMPED WAREHOUSES AND DELIVERY BAYS
Tight turns are easy with the Grendia thanks
Right angle stacking aisle width
to a fully hydraulic power steering fitted with
steering synchronizer/mechanism for 100%
Minimum turning radius 3650mm • FD15N
stationary steering. Its maneuverability 1950mm • FD15N
allows for easy U-turns and navigation in
small workspaces.
EASY OPERATION. DRIVER COMFORT.
1 – Suspension seat with hip support mechanism.
Ability to adjust position and extent of reclining according to
body shape for maximum comfort. Seat belt fitted with warning
light. Soft-grip handle make getting in and out easier.
2 – Electric shift lever can be moved back and forth at the touch
of a finger. (for torque-converter models only)
3 – Acrylic roof (optional) for comfortable operation in outdoor
conditions. Easily installed and uninstalled.
4 – Tiltable steering column.
5 – Fully hydraulic power steering.
Fitted with steering synchronizer, a mechanism that automatically
matches the rear wheel angle to the steering angle.
6 – Inching pedal allows delicate movements.
7 – Switches for optional functions positioned on the right side of
the dashboard.
8 – Combination switch integrating indicators and headlight
switches.
9 – Power-train full floating structure for excellent vibration
reduction. The entire power-train is supported by vibration
absorbent rubber mounts.

OPTIONAL “FINGERTIP CONTROL MODEL”

1
– FOR EVEN SMOOTHER OPERATION 2
3
Grendias can be equipped with a fingertip controller to enable 4
5
operations such as lifting and tilting at the touch of a finger.
1 Mast emergency stop button 3 Lift control lever 5 3V control lever
2 4V/5V switch 4 Tilt control lever

2 5 optional items 5 standard for certain regions

9
 MAINTENANCE
MAINTENANCE

CENTRALIZED
CENTRALIZED MAINTENANCE MAINTENANCE
POINTS FOR EASY POINTS FOR EASY
INSPECTION AND MAINTENANCE
INSPECTION AND MAINTENANCE
Inspection and maintenance is made easy thanks to a fully
Inspection and maintenance is made easy thanks to a fully
extendable engine hood, removable side covers and centralized
extendable engine hood, removable side covers and centralized
maintenance points. In addition, the time intervals between oil
maintenance points. In addition, the time intervals between oil
changes and lubrication requirements have been increased,
changes and lubrication requirements have been increased,
resulting in lower maintenance costs.
resulting in lower maintenance costs.