Sikatop - 107 Sealid 221102 105735
Sikatop - 107 Sealid 221102 105735
SikaTop®-107 Seal ID
WATERPROOFING SLURRY
PRODUCT INFORMATION
Packaging 25 kg set
Appearance / Colour Form Color
A = Liquid Concrete grey
B = Powder
Shelf life 9 months from the date of production when undamaged and unopened
original container.
Storage conditions Store in dry, cool, and shaded place conditions at temperatures between
+5 °C and +30 °C.
Density 2.1 – 2.2 kg/L (part A + B mixed)
TECHNICAL INFORMATION
Compressive strength 28 days ~30 N/mm2 (ASTM C-109)
1/3
APPLICATION INFORMATION
Mixing ratio For brush application 1 : 4 by weight
For trowel application 1 : 4.5 by weight
Consumption Depending on type of application, 2 coats always required 1 - 1.5 kg/m2
per coat.
Pot Life ~20 minutes (at +30 °C)
not coalesce and the SikaTop®-107 Seal ID will not ▪ The first coat has to be applied on the damp sub-
cure to a waterproof thin render. strate (pre-wetted).
▪ For application of tile on top of SikaTop®-107 Seal ID, ▪ The second coat will be applied after the first coat
then SikaCeram® TileFix Series should be used. For started to set and can support the following coat,
optimum result SikaCeram® TileFix Series should be usually after 2-6 hours depending on climate.
applied max. 48 hours after application of finish coat ▪ Finish off by brushing with dry sponge when setting
of SikaTop®-107 Seal ID (finish coat applied by of second coat has started.
brush). ▪ Maximum waiting time between first and second
coats is 48 hours.
ECOLOGY, HEALTH AND SAFETY ▪ Use Sika Sovamesh 80 as reinforcement membrane
when necessary at corner and detailing area.
User must read the most recent corresponding Safety CURING TREATMENT
Data Sheets (SDS) before using any products. The SDS
provides information and advice on the safe handling, As with all cement based products, curing is import-
storage and disposal of chemical products and con- ant. Protect the freshly applied product against direct
tains physical, ecological, toxicological and other sunlight and strong winds. Use damp hessian or plastic
safety-related data. sheet. Protect the applied SikaTop from rain and wa-
ter splashes until fully hardened. (± 6 hours).
APPLICATION INSTRUCTIONS
SUBSTRATE QUALITY / PRE-TREATMENT
Concrete and mortar:
Sound, clean, free of oil, grease, dust or laitance, as
even possible absorbent substrates have to be thor-
oughly watered and must be damp wet prior to applic-
ation of first coat of SikaTop®-107 Seal ID.
2/3
LOCAL RESTRICTIONS
Note that as a result of specific local regulations the
declared data and recommended uses for this product
may vary from country to country. Consult the local
Product Data Sheet for exact product data and uses.
LEGAL NOTES
The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
tions. In practice, the differences in materials, sub-
strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
mendations, or from any other advice offered. The
user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product
Data Sheet for the product concerned, copies of which
will be supplied on request.
SikaTop-107SealID-en-ID-(05-2021)-2-1.pdf
3/3