Professional Documents
Culture Documents
Windsor Kilns 2021
Windsor Kilns 2021
When you want to produce only the best quality timber products, you can rely on a Windsor kiln.
windsor.co.nz
CDK
Windsor CDK-D
The CDK-D has a dual pass design as the timber stacks pass through the CDK in opposite directions.
It incorporates pre-heating, drying and conditioning phases all in one extended chamber. This design includes op-
tions for both direct fired and indirect fired heating. The timber is automatically advanced, based on the moisture
content of the timber in the central MD (main drying) section, by hydraulic or electric advancer units.
CDK control is via a PC/PLC kiln management program like Dryspec® integrated with the DryTrack® Echo in-kiln
moisture measuring system.
Windsor CDK-S
The CDK-S has a single pass design with all the timber passing through the CDK in one direction only.
It also incorporates pre-heating, drying and conditioning phases all in one extended chamber. The design incor-
porates both direct and indirect heating principles. The timber charge is automatically advanced based on the
moisture content of the timber in the MD section.
CDK control is via a PC/PLC kiln management program like Dryspec® integrated with the DryTrack® Echo in-kiln
moisture measuring system.
Classic Kilns
The Windsor Classic kiln range is based on >30 years’ experience in providing efficient drying systems for softwoods.
It is available in six popular, standard sizes which allows for a faster delivery and lower capital investment without
compromising the renowned Windsor quality. Windsor Classic kilns have an aluminium portal style structure and are
clad in aluminium panels incorporating a layer of resin impregnated insulation.
The standard Classic kiln has a door at one end, but a second door is an option if required. Personnel access doors are
fitted on both sides of the stack.
The Classic kiln chamber, fan system, heating coils, steam generator and all other components are fabricated from
corrosion resistant stainless steel or aluminium.
Pioneer Kilns
Windsor Pioneer Kilns are designed specifically for drying softwoods. The Pioneer offers almost unlimited design
flexibility.
High Performance
A Windsor kiln will deliver maximum throughput for minimum operating costs
Performance guarantees
We offer a range of performance guarantees to suit each specification
In-kiln conditioning
We offer either in-kiln conditioning systems or stand-alone conditioning chambers. The latter option will increase
throughput dramatically, particularly on HT drying operations.
Noise reduction
Noise emissions from kilns must be minimised on some sites. We offer a special ‘Q’ range of kilns designed to reduce
the acoustical emissions to meet statutory requirements.
Heating
We offer design options for both indirect heated or direct fired kiln systems.
We can use steam, thermal or HPHW (high pressure hot water) as a heating medium.
Controls
We offer DrySpec or Kilnwatch 2000 controls packages together with our in-kiln DryTrack or DryTrack Echo mois-
ture measuring systems.
Type PSC
Our Phytosanitary Steam Chamber systems use low pressure saturated steam for the phytosanitary heat treat-
ment of dry timber or logs for export. The Windsor PSC chambers are ideal for heat treating these products to meet
International ISPM15 rules.
Energy saving:
The use of low-pressure saturated steam inside the PSC chamber makes them highly thermal efficient. They will use
about 1/3 of the thermal energy consumed by a conventional heat and vent kiln.
Improved grade:
A significant advantage is that there will be no drying of the timber or logs. This means that grade recovery for
already dried feedstock will increase as distortion is reduced due to the prevention of “over drying”.
No electrical cost:
Other than a small process water pump Windsor PSC chambers do not have circulation fans i.e. there are near zero
electricity usage with the technology.
Controls:
Each Windsor PSC system is managed via a Dryspec S controls (PC/PLC) package. Dryspec is robust and easy to
use.
Heating Mediums:
We can use either steam, thermal oil or HPHW (high pressure hot water) as a heating medium. On sites where there
is no central heat plant we can use direct gas fired technology or provide a package thermal oil heater (gas fired) on
each chamber.
Construction:
The chambers have a 100% aluminium and stainless steel construction.
Log Conditioning
Type LCC
Windsor LCC systems use low pressure saturated steam to efficiently heat/condition logs prior to peeling or slicing.
Significant reduction in the degrade associated with the peeling or slicing of most logs can be achieved if the log
core temperature is raised, typically to about 50oC (125oF). Comparisons with peeling at ambient temperatures
and at elevated log core temperatures have repeatedly shown that conditioned softwood logs will reduce veneer
degrade by up to 18%.
Conditioned peeler feed stock also results in a smoother surface finish on the veneer which effectively reduces the
amount of adhesive required for the laminating process.
Traditional methods of log heating, e.g. hot water ponds, often create large volumes of waste water which is envi-
ronmentally unfriendly.
Board
Sensor plate
Infra red detector
Lumber charge / stack Computer
RS232
link
RS422
link
Measuring units
(up to 6) MMU Computer Pressure pack
Measuring Unit
DryTrack In-Kiln system is a very accurate, wide range moisture content measuring and monitoring system for
timber drying systems. The use of DryTrack can help produce high quality dried timber, reduce degrade and energy
costs and increase drying production.
DryTrack in-line is a ‘non-contact’ moisture content (MC) measuring system that can measure both transverse and
longitudinal moving boards at the planer mill.
Pressure Pack
Windsor’s DryTrack system is equipped with a filtered air pressurization package, this keeps the electronics dry and
free from steam ingress resulting in prolonged meter card life. A robust blower unit is supplied complete with inlet
filter. The Pressure Pack system can be retrofitted to other MC systems.
System Features
Measurement can start at the green moisture content at ambient temperatures or at 80% moisture content (on a
dry basis) at operating temperatures.
The system displays readings from each zone or an average for the whole kiln. It can be linked to a kiln management
system for added flexibility and greater control or run as a standalone package.
The readings are taken from a large sample of lumber, typically 100 to 120 boards per measuring point.
It can also increase production as less time is spent loading a new charge of timber into the kiln.
It is an ideal system for continuous or progressive kilns.
Control Systems
Dryspec®
Dryspec is a SCADA system which is easy to operate, yet powerful in functionality. Dryspec® is an advanced
computer and PLC (off the shelf) based management system providing centralised control and a database
of any number of timber drying kilns, conditioning chambers or CDKs. It is integrated into our DryTrack and
DryTrack Echo in-kiln moisture content systems and heat plants. Dryspec® is structured as the basic process
control and reporting system with add-on Advanced Process and Management options.
Kilnwatch 2000
Kilnwatch 2000 is an easy to use, efficient and low capital cost computer control system specifically designed
for smaller sites.
Kilnwatch 1000
Kilnwatch 1000 is a simple electronic control system mainly for the smaller timber drying installations having
one or two kilns. Each kiln has a dedicated Kilnwatch panel incorporating discrete programmable controllers,
timers, relays and a chart recorder needed to perform.
July 2021
© Windsor Engineering Group Ltd 2021