Scribd Logo
Upload

Welcome to Scribd!

  • PTFE HY22 Hoerbiger

    Uploaded by

    Татьяна Васильева
    67 views1 page
    HY22 is a high performance carbon and graphite filled PTFE that produces the lowest wear rate for medium to high filled grades. It provides enhanced performance in both lubricated and non-lubricated environments where conventional PTFE fails. It has low thermal expansion and good creep characteristics, making it suitable for low pressure air and hydrocarbon compressor duties. Physical properties include a maximum operating temperature of 250°C, density of 2.03 g/cm3, Shore D hardness of 62, tensile strength at break of 12.5 MPa, and elongation at break of 11%.

    Original Description:

    PTFE COMPOUND HOERBIGER. HY22

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    HY22 is a high performance carbon and graphite filled PTFE that produces the lowest wear rate for medium to high filled grades. It provides enhanced performance in both lubricated and non-lubricated environments where conventional PTFE fails. It has low thermal expansion and good creep characteristics, making it suitable for low pressure air and hydrocarbon compressor duties. Physical properties include a maximum operating temperature of 250°C, density of 2.03 g/cm3, Shore D hardness of 62, tensile strength at break of 12.5 MPa, and elongation at break of 11%.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    67 views1 page

    PTFE HY22 Hoerbiger

    Uploaded by

    Татьяна Васильева
    HY22 is a high performance carbon and graphite filled PTFE that produces the lowest wear rate for medium to high filled grades. It provides enhanced performance in both lubricated and non-lubricated environments where conventional PTFE fails. It has low thermal expansion and good creep characteristics, making it suitable for low pressure air and hydrocarbon compressor duties. Physical properties include a maximum operating temperature of 250°C, density of 2.03 g/cm3, Shore D hardness of 62, tensile strength at break of 12.5 MPa, and elongation at break of 11%.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    HY22

    HY22 is a high performance carbon and graphite filled PTFE. It produces the lowest wear rate in
    the range of medium to high filled grades. This premium grade provides enhanced performance Air
    in both lubricated and non-lubricated environments where conventional PTFE materials fail by
    extrusion. Low thermal expansion and good creep characteristics make it the first choice for low
    pressure air and hydrocarbon compressor duties.
    Industrial Gases

    Physical Properties Natural Gas

    Property Method Value

    COTE - Radial x 10-6/C (20-200 °C) ASTM D696 49.8 Refinery

    COTE - Axial x 10-6/C (20-200 °C) ASTM D696 62.2

    Maximum operating temperature (°C) - 250


    Olefins
    Density (g/cm3) ASTM D792 2.03

    Shore D Hardness ASTM D2240 62

    Tensile strength at break (MPa) ASTM D638 12.5 Alcohols

    Elongation at break (%) ASTM D638 11

    Chemicals

    Operating range

    Max. Gas Temperature


    Refrigeration
    Max. Pressure (bar)
    (°C)

    Packing Discharge Cylinder Ring Diff.


    Discharge Design
    Non-Lube Lube Non-Lube Lube

    200 150 100 175 50 100

    Operating restriction for oxygen-service: Compression ratio up to 3 and max. temperature 225°C

    YOUR
    EASY
    WAY

    You might also like